Expert Employment

This role involves working with high-pressure gas and fluidic systems, engine testing, and test facility operations to ensure optimal performance and safety standards. Key Responsibilities Conduct engine testing and ensure correct feedline pressures are set. Operate and maintain mechanical and steam vacuum systems. Perform pressure and control system checks. Set up and operate Data Acquisition Systems and thermal imaging cameras. Carry out instrumentation calibrations and ensure compliance with testing standards. Work extensively with high-pressure gas and fluidic systems. Experience Required: Strong mechanical fitting skills. Solid understanding of mathematics and physics. Hands-on experience in engine testing and test facility operations. Experience in maintenance and operation of mechanical systems.

We are looking for a Laboratory Test Engineer to support the testing, maintenance, and fault-finding of advanced scientific and engineering equipment. This role would suit candidates with experience operating laboratory instrumentation, working in cleanroom or safety-critical environments, and following technical procedures and SOPs. Key Requirements Degree in Physics, Engineering, or a related scientific discipline Experience with laboratory, test, or scientific equipment Fault-finding, maintenance, or calibration experience Ability to work in a controlled, cleanroom, or safety-critical environment Strong attention to detail and documentation skills Desirable Experience with instrumentation, sensors, data acquisition, or testing Cleanroom, aerospace, semiconductor, or research laboratory experience Python or data analysis experience

The primary responsibility of the role is to support the Hot Fire Test teams across all engine test cells. This involves site maintenance, upkeep, and preparation activities before and after hot fire testing, as well as set-down activities post-test. Key Responsibilities Perform site maintenance and assist in site set-up and take-down activities related to testing. Maintain and manage Ground Support Equipment (GSE), ensuring it meets operational requirements. Test and verify broadband seismic instruments, including surface and borehole setups. Engage with database management for equipment tracking and test documentation. Handle and operate vacuum and pressure systems as needed. Conduct tests on electrical motors and oversee the function testing of all engines. Prepare and produce detailed test procedures for use by the test team during operations. Requirements Experience working in the space industry, with a strong understanding of relevant technologies and standards. Proficiency in database management for tracking and documentation purposes. Familiarity with vacuum and pressure systems. Hands-on experience in testing electrical motors and conducting function tests on engines. Demonstrated ability to prepare comprehensive test procedures.

Project Manager required to control Radar and Naval customer funded and Planned Value defence development and production also lead large bids to ensure successful bids are then delivered owning all aspects of the programme across Sales, Commercial, Legal and Compliance, Engineering, Operations, Procurement, Customer Services, Quality and Accounting departments. Requirements Commercial Project Management Experience in an Engineering environment ideally Software development. Ran Projects from conception, forecasting, through implementation to closure controlling budgets against spend. HND or degree and APM ideally qualified in Project management or equivalent experience. Financially and commercially fluent. Responsibilities Manage the planning and execution of projects and bids. Manage subcontractors. Project costings for bid preparation. UK and occasional overseas travel at short notice. Direct customer contact regarding contract delivery.

Administrator required to join a supply chain support team across goods and materials delivery documentation, tracking and logistics. Requirements Experience with shipping documentation, delivery paperwork, logistics or supply chain. Good Microsoft Office skills, particularly Excel. Any SAP knowledge would be highly beneficial. Responsibilities Create delivery notes, commercial invoices, and shipping documentation. Process and maintain logistics data in SAP. Coordinate with Warehouse, Quality, Logistics, and Project teams. Track shipments and ensure timely deliveries. Liaise with customers and freight forwarders. Maintain accurate logistics records and reports.

Quality Control Technician required to join an Engineering manufacturing and assembly production quality team who inspect and test equipment. You will have practical skills and understand the impact of spotting and resolving any issues or non conformances early. Requirements Production or Manufacturing Quality exposure. Responsibilities Inspect documentation, parts, components, materials, and equipment against specifications.

A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria. In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes. You will contribute to maintaining high quality standards and continuous improvement across manufacturing operations. Responsibilities Perform technical duties across mechanical, electronic, and system-based projects. Conduct testing, measurements, and process controls on key production lines. Read and interpret engineering drawings and job documentation ( work orders, bills of materials). Troubleshoot and repair product or process issues. Maintain tools, machinery, and equipment to ensure operational efficiency. Support continuous improvement using modern manufacturing principles. Skills Hands on experience in mechanical assembly, testing, or manufacturing environments. Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination. Familiarity with hydraulic, electronic, and mechanical systems. Strong problem-solving and diagnostic skills.

Systems Engineer required ideally with Maritime Defence or Radio Naval Navigation industry experience to manage external customer driven product concept, design, development and delivery with cross functional internal teams including Software, Mechanical and Electrical disciplines. Requirements British Citizen eligible for UK Security clearance. Defence engineering experience of systems and product lifecycles from concept design, integration and test. Valid UK Driving License Beneficial Radar, Radio System, communications protocols systems and bid proposal knowledge. Naval Platform, Navigation equipment electronics EMC, ESD skills. This is a fantastic opportunity to join a cutting edge technical team working on very exciting detection and navigation military systems.

We are looking for a Senior Embedded Software Engineer to develop advanced, real-time software solutions for complex systems. You will be responsible for delivering software from initial concept through to fully verified solutions, working across the full development lifecycle. Key Responsibilities Design, develop, and maintain high-quality software using best engineering practices Take ownership of software development from requirements through to verification and validation Support and enhance existing software in line with evolving project and customer needs Contribute to system architecture, design reviews, and technical decision-making Collaborate with multidisciplinary teams including systems, hardware, and test engineers Provide technical guidance and mentorship to junior engineers Ensure software is developed in line with relevant standards and quality processes Key Skills Strong experience in C++ development (ideally modern C++) Proven experience working across the full software development lifecycle Experience with GUI UX or Human-Computer Interaction (HCI) Knowledge of Python, PowerShell, or other scripting languages Experience in real-time, embedded and safety-critical systems Familiarity with version control, CI and CD, and software testing frameworks Degree in Computer Science, Software Engineering, or a related discipline

C and C++ Senior Software Engineer required with Microsoft Visual C++ or MSVC experience ideally with OpenGL or other rich GUI knowledge required to join a large team. You will work towards the ownership of a design from requirement specification through to verified software including extensive test and verification. Requirements Excellent C++ fluency and experience. OpenGL, GUI, UX or HCI exposure using C and C++. Microsoft Visual Studio experience ideally up to 2022 or 2026 versions. Scripting languages such as Python, PowerShell or related. Upper first or higher degree in a relevant subject. Responsibilities Design and develop highly responsive, rich and real time graphical user interfaces. Specify, design, implement, testing and maintain of software using C, C++ and associated technologies.

We are looking for an experienced ILS Engineer to support defence and maritime projects throughout the equipment lifecycle, from bid and development phases through to in-service support. Key Responsibilities Deliver ILS activities including Supportability Analysis, LORA, Spares Analysis, Obsolescence Management, and Whole Life Costing. Support bid and proposal activities by providing ILS estimates and technical input. Develop and maintain logistics support documentation and repositories. Collaborate with engineering, project, and customer teams to ensure supportability requirements are met. Contribute to continuous improvement initiatives and the growth of ILS capabilities. Requirements Experience in Integrated Logistics Support within the defence or maritime sector. Knowledge of Defence Logistics Framework requirements. Understanding of supportability analysis, maintenance planning, and lifecycle support. Strong communication and stakeholder management skills. HNC and HND or degree qualification in an engineering discipline preferred.

Integrated Logistic Support or ILS Engineer with Defence Logistic Framework experience required to help develop and deliver ILS capabilities for equipment during the Project development, In Service Support phases and bid process for Naval equipment in Surveillance and Government sectors. Requirements Defence Logistic Framework capability development experience of Def-Stan 00-60, Def-Stan 00-600 application to defence programmes. Integrated Logistic Support or ILS subject matter expert. Electronic Engineering HNC level or higher qualification. ASD S3000L application knowledge to supportability analysis programmes Responsibilities Help develop the ILS capability of the business line offering clients a full range of ILS activities. Supportability Analysis Level of Repair Analysis Spares Ranging and Scaling Whole Life Cost Analysis Logistic Information Repository management and update Obsolescence analysis Any other task associated with this role.

We are seeking a Production Quality Inspector to support quality control activities within a manufacturing environment. This role involves inspecting components, conducting tests, and ensuring products meet required specifications and quality standards. Key Responsibilities Inspect parts, materials, and assemblies against specifications Carry out manufacturing and engineering tests Record and report inspection and test results Support calibration of measurement equipment (when authorised) Assist with test setup and basic fixture design Ensure all quality and testing activities are carried out safely Contribute to continuous improvement initiatives Requirements Experience in quality inspection or manufacturing Understanding of quality control processes and non-conformance Ability to read and follow technical procedures

Requirements Experience as a CNC Machinist Programmer using Mazak machines and intergrex 200 III programming with Mazatrol Fusion 640 and SolidCAM. Responsibilities Program, set, and operate Mazak 5-axis Lathes using G-code and M-code controlled CNC machines. Operate Manual Lathes and Gate Mill. Work from engineering drawings, CAD data, and technical specifications. Precision machining of components to tight tolerances. Conduct tool selection, tool setting, and offsets to ensure high quality output.

We are looking an Electronics Test Technician to carry out electrical and functional testing of PWAs (Printed Wiring Assemblies) and electronic assemblies. This role is primarily focused on testing and measurement Key Responsibilities Perform functional testing on PWAs and electronic assemblies. Use electronic lab equipment such as, Multimeters, Oscilloscopes Low and high voltage power supplies (up to 400VDC) Carry out debugging and measurement tasks on electromechanical assemblies. Document and report test results accurately. Work to established engineering and safety standards. Experience Required Hands-on experience with electronic lab and test equipment. Understanding of electrical measurement and testing techniques. Knowledge often gained through further education in Electrical or Electronic Engineering (ONC, HNC, HND, NVQ Level 2

An established engineering manufacturer is seeking an Electronic Manufacturing Technician to join its production team in Stonehouse. The role Test, fault-find, and repair electronic and electromechanical assemblies Carry out functional testing of PWAs and PCBAs to defined procedures Support tool assembly, calibration, and production activities Maintain and repair test equipment Work with MRP systems (SAP) and production documentation About you Background in electronic or electrical manufacturing or testing Comfortable with multimeters, oscilloscopes, and LV and HV power supplies Skilled in soldering, crimping, wiring, and basic fault finding Able to read drawings and work to IPC standards Qualification such as ONC ,HNC , HND ,NVQ Level 2 preferred

You will be responsible for performing soldering, crimping, and general wiring tasks, as well as detecting and resolving workmanship issues. Additionally, you will actively contribute to Lean and 5S improvements, promoting a culture of continuous improvement within the organization. Responsibilities Develop insights and implement 5S improvements to enhance efficiency and productivity Conduct soldering, crimping, and general wiring tasks with precision and accuracy Detect and resolve workmanship issues in downhole electronics equipment and processes Requirements Minimum of 3 years of experience in a similar functional area Proficient in soldering, crimping, and general wiring techniques Solid understanding of metrics and the ability to utilize them for process improvements Ability to work independently and take ownership of assigned tasks

Seeking a skilled Senior Test Engineer with expertise in space propulsion. Responsible for overseeing firing site operations, including site preparation, maintenance, fuel and oxidizer handling, pressure systems. Key Responsibilities Design and manufacture of liquid propellant and high-pressure gas feed systems. Advanced training provision in key operational skills on firing sites. Proficient analysis and assessment of test data, producing high-quality analysis material. Adherence to COMAH controlled testing standards. Minimum Requirements: Mechanical fitter or practical engineering skills Ideally qualified to OU or equivalent graduate level course in engineering. Level 4 training on the Skills and Competency Matrix with in-depth experience.

Seeking a Warehouse Material Handler to manage product and material movement, inspections, and inventory tasks. Responsibilities include issuance, picking, packing, reception, and inventory counts. Additional duties involve compliance, equipment operation, and continuous improvement efforts. Key responsibilities: Operate a 7.5 Ton lorry for moving items between buildings (if qualified). Maintain a high level of housekeeping in the warehouse and shipping/receiving areas Perform various warehouse tasks, including labelling, storing, issuing, disposing, and cycle counting of inventory items Operate forklift or other material handling equipment for internal goods movement. Key skills: Previous experience in a technology or manufacturing centre is preferred. Knowledge of Manufacturing Resource Planning System, specifically SAP The candidate must hold CPC license

Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes. The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data. There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment. You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc.