CNC Miller Shipley Rotating shifts PERMANENT SALARY OF £48,459.11 Our client, a large engineering business based in Shipley, have an urgent requirement to recruit a number of well versed CNCMillersto theirteam. Duties To complete pre use machine inspections, to record results and report any hazards or faults. To complete asset care tasks in line with maintenance schedule. To monitor metal cutting fluids to ensure correct tank levels and percentage concentration are maintained. Highlighting any concerns with environmental team and team leader. Maintain and clean tanks in line with service schedule. To make full use of the working day completing in-cycle tasks where cycle times permit, to include the running of additional machines or conducting additional manual operations. To set and operate CNC Machining Centres in line with standard operating procedures and setup sheets. The production and inspection of parts in line with drawing specification and quality standards. To include the deburring and part marking of components. To achieve required machine efficiency targets Data capture, the use of manual and computer systems to book and record material movements, recording of process times, downtime, part quantities, and other information to assist in the control and development of the department. Adherence to production plan. The ideal cnc miller will be able to demonstrate a strong track record in a similar role and be an apprentice trainedengineer (NVQ level 3 or equivalent ). As a cnc miller you will be able to set, operate and edit programs using either Heidenhein, FANUC or Mazak control systems, These are permanent positions for qualified cnc millers where you will be expected to work the following rotating shifts: Week 1 6am to 2pm Week 2 2pm to 10pm ( 10:30pm finish on a Friday) Week 3 10pm to 6am ( but only 4 nights, no work Friday ) This equates to 37.5 hours per week. In return the successful cnc miller can expect a base salary of £34,717.80 plus a very healthy shift allowance of 39.58% giving a final salary of £48,459.11 This vacancy is being advertised by AMF Recruitment Ltd, a specialist recruitment business supporting the manufacturing industry. JBRP1_UKTJ
Dec 06, 2025
Full time
CNC Miller Shipley Rotating shifts PERMANENT SALARY OF £48,459.11 Our client, a large engineering business based in Shipley, have an urgent requirement to recruit a number of well versed CNCMillersto theirteam. Duties To complete pre use machine inspections, to record results and report any hazards or faults. To complete asset care tasks in line with maintenance schedule. To monitor metal cutting fluids to ensure correct tank levels and percentage concentration are maintained. Highlighting any concerns with environmental team and team leader. Maintain and clean tanks in line with service schedule. To make full use of the working day completing in-cycle tasks where cycle times permit, to include the running of additional machines or conducting additional manual operations. To set and operate CNC Machining Centres in line with standard operating procedures and setup sheets. The production and inspection of parts in line with drawing specification and quality standards. To include the deburring and part marking of components. To achieve required machine efficiency targets Data capture, the use of manual and computer systems to book and record material movements, recording of process times, downtime, part quantities, and other information to assist in the control and development of the department. Adherence to production plan. The ideal cnc miller will be able to demonstrate a strong track record in a similar role and be an apprentice trainedengineer (NVQ level 3 or equivalent ). As a cnc miller you will be able to set, operate and edit programs using either Heidenhein, FANUC or Mazak control systems, These are permanent positions for qualified cnc millers where you will be expected to work the following rotating shifts: Week 1 6am to 2pm Week 2 2pm to 10pm ( 10:30pm finish on a Friday) Week 3 10pm to 6am ( but only 4 nights, no work Friday ) This equates to 37.5 hours per week. In return the successful cnc miller can expect a base salary of £34,717.80 plus a very healthy shift allowance of 39.58% giving a final salary of £48,459.11 This vacancy is being advertised by AMF Recruitment Ltd, a specialist recruitment business supporting the manufacturing industry. JBRP1_UKTJ
NDT Technician/Engineer - Progression To Manager 4 Day Working Week! 35,000 - 45,000 + Overtime (at 1.5x) + Training + Progression Monday - Wednesday, 07:30 - 18:00, Thursday, 07:30 - 16:00 Barrow-In-Furness Do you have test experience within an engineering, aerospace or manufacturing environment? Do you have a PCN level 2 or 3 qualification? Are you looking for an exciting new role within a leading engineering organization that are offering a 4 day working week, excellent training and regular overtime at an increased rate to increase your earnings? Due to continued growth and significant investment, my client is looking for an NDT Technician to join their team working out of their state of the art facility near Barrow-In-Furness. The successful applicant will be heading up a new division within the quality and testing department and will have the opportunity to progress and develop their own team later down the line. You will gain access to training to enhance your quality and inspection skills. You will detect discontinuities, verify material integrity, and ensure full compliance with industry and regulatory standards. The ideal candidate brings strong technical expertise, attention to detail, and a commitment to safety, along with the ability to interpret results accurately and maintain thorough documentation. This is a great time to join a business at the forefront of their industry. Using cutting edge innovation, technology and materials to supply a variety of customers within the marine, aerospace and defence sectors, the business are looking to make multiple hires to cater for this exciting growth period. For more information please click apply and contact Patrick Walsh - Reference 4707 - (phone number removed) The Role: Programming and operating CNC machines 4 day working week, flexible working hours Inspecting machined parts The Candidate: Has worked with Metals CNC machining and programming experience A commutable distance to Barrow-In-Furness Consultant: Patrick Walsh elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. NDT Welding Test Engineer Manager Aerospace Inspection Quality CSWIP PCN 5 Axis Operator Machinist Mechanical Defence Aerospace 4 day week Overtime Motorsport Production Manufacturing Engineer Engineering Manufacture Days Production Manufacture Manufacturing Barrow-In-Furness Kendal Ulverston Cumbria Dalton-In-Furness
Dec 05, 2025
Full time
NDT Technician/Engineer - Progression To Manager 4 Day Working Week! 35,000 - 45,000 + Overtime (at 1.5x) + Training + Progression Monday - Wednesday, 07:30 - 18:00, Thursday, 07:30 - 16:00 Barrow-In-Furness Do you have test experience within an engineering, aerospace or manufacturing environment? Do you have a PCN level 2 or 3 qualification? Are you looking for an exciting new role within a leading engineering organization that are offering a 4 day working week, excellent training and regular overtime at an increased rate to increase your earnings? Due to continued growth and significant investment, my client is looking for an NDT Technician to join their team working out of their state of the art facility near Barrow-In-Furness. The successful applicant will be heading up a new division within the quality and testing department and will have the opportunity to progress and develop their own team later down the line. You will gain access to training to enhance your quality and inspection skills. You will detect discontinuities, verify material integrity, and ensure full compliance with industry and regulatory standards. The ideal candidate brings strong technical expertise, attention to detail, and a commitment to safety, along with the ability to interpret results accurately and maintain thorough documentation. This is a great time to join a business at the forefront of their industry. Using cutting edge innovation, technology and materials to supply a variety of customers within the marine, aerospace and defence sectors, the business are looking to make multiple hires to cater for this exciting growth period. For more information please click apply and contact Patrick Walsh - Reference 4707 - (phone number removed) The Role: Programming and operating CNC machines 4 day working week, flexible working hours Inspecting machined parts The Candidate: Has worked with Metals CNC machining and programming experience A commutable distance to Barrow-In-Furness Consultant: Patrick Walsh elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. NDT Welding Test Engineer Manager Aerospace Inspection Quality CSWIP PCN 5 Axis Operator Machinist Mechanical Defence Aerospace 4 day week Overtime Motorsport Production Manufacturing Engineer Engineering Manufacture Days Production Manufacture Manufacturing Barrow-In-Furness Kendal Ulverston Cumbria Dalton-In-Furness
A well-established UK manufacturer and supplier of specialist building boards, facades, and through-wall solutions is seeking an experienced Alphacam Programmer to join their Production Department. The Alphacam Programmer will be responsible for developing CNC programs from architectural and engineering drawings, supporting machine setup and operation, and ensuring all work meets strict quality and performance standards. The successful candidate will collaborate closely with engineers and production teams to optimise machining processes and deliver consistent, accurate results. Benefits: Salary up to 36,000 Location: Newcastle Under Lyme Annual leave: 26 days + bank holidays Auto enrolment pension Free onsite parking Hours: 8:30am-5pm Monday to Friday (45 minute break - 38.75hrs per week) Key Responsibilities: Develop and write CNC programs from architectural and engineering drawings Set up and operate CNC machinery Perform precision quality checks using tools such as callipers, bore gauges, and dial indicators Interpret and apply GD&T requirements Make technical decisions on machining processes and design-related requirements Collaborate with engineers, mechanics, and craftsmen to improve machining efficiency Ensure all work complies with quality policies, specifications, and procedures Experience & Skills Required: Proven experience as a CNC Programmer or similar CNC role Minimum 2 years' experience in wood or composite cutting Strong knowledge of Alphacam or comparable CAM software Proficiency in operating CNC machines and programming software Ability to understand, interpret, and edit FANUC control systems Strong mathematical skills for measurements and calculations Confident use of fixtures, tooling, and calibration equipment Ability to perform tooling offsets and tooling changes Good knowledge of machining techniques and industry best practices Strong organisational skills with the ability to work independently If this sounds like you, please apply today! :)
Dec 04, 2025
Full time
A well-established UK manufacturer and supplier of specialist building boards, facades, and through-wall solutions is seeking an experienced Alphacam Programmer to join their Production Department. The Alphacam Programmer will be responsible for developing CNC programs from architectural and engineering drawings, supporting machine setup and operation, and ensuring all work meets strict quality and performance standards. The successful candidate will collaborate closely with engineers and production teams to optimise machining processes and deliver consistent, accurate results. Benefits: Salary up to 36,000 Location: Newcastle Under Lyme Annual leave: 26 days + bank holidays Auto enrolment pension Free onsite parking Hours: 8:30am-5pm Monday to Friday (45 minute break - 38.75hrs per week) Key Responsibilities: Develop and write CNC programs from architectural and engineering drawings Set up and operate CNC machinery Perform precision quality checks using tools such as callipers, bore gauges, and dial indicators Interpret and apply GD&T requirements Make technical decisions on machining processes and design-related requirements Collaborate with engineers, mechanics, and craftsmen to improve machining efficiency Ensure all work complies with quality policies, specifications, and procedures Experience & Skills Required: Proven experience as a CNC Programmer or similar CNC role Minimum 2 years' experience in wood or composite cutting Strong knowledge of Alphacam or comparable CAM software Proficiency in operating CNC machines and programming software Ability to understand, interpret, and edit FANUC control systems Strong mathematical skills for measurements and calculations Confident use of fixtures, tooling, and calibration equipment Ability to perform tooling offsets and tooling changes Good knowledge of machining techniques and industry best practices Strong organisational skills with the ability to work independently If this sounds like you, please apply today! :)
CNC Machinist - Millers / Turners available Days Birmingham Permanent £17 - £18 per hour The Opportunity: EMBS Engineering is currently recruiting for CNC Machinists - Both Millers & Turners required to join a precision engineering company located in Birmingham on a permanent basis . Our client is a well-established advanced manufacturing business that specialises in machining small, sub assembly components for high profile, leading organisations within the aerospace industry. Due to the nature of the markets our client supplies into, all candidates must be UK residents, and DBS checks will be required. Please note we cannot offer visa sponsorship for overseas candidates. Key Benefits on offer: £17 - £18 per hour Opportunity to work with state-of-the-art machinery Hours: Day shift, flexible start and finish time Overtime available Permanent position offering stability and longevity, coupled with the chance to be part of an amazing, growing organisation that is currently expanding Your responsibilities include: Set up, program, and operate CNC lathes and/or milling machines Work to tight tolerances using engineering drawings and specifications Inspect finished parts to ensure quality standards are met Perform machine maintenance and support continuous improvement initiatives Collaborate with engineers and production staff to optimise workflow and efficiency Successful applicants MUST be able to demonstrate: Minimum of 3 years experience programming, setting and operating multi axis machines using online controls If Milling biased - must have Heidenhain controls experience If Turning biased - must have Fanuc controls experience Worked with multi-axis machines Ability to work from engineering drawings Previous experience of machining complex components, within highly regulated industries including Aerospace, Automotive, Motorsport, F1, Defence, Oil & Gas, Nuclear, Petrochemical, Marine Knowledge of offline programming experience using Fusion 360 would be preferable If you are interested in the opportunity of CNC Machinist above and believe you meet the illustrated criteria, apply today to join our clients growing Machining department located in Birmingham. About us: EMBS Engineering is a dedicated talent specialist that partners with some of the UK's most prestigious, advanced, precision engineering companies within the Aerospace, Automotive / Motorsport, Nuclear, Oil & Gas, Green, Environmental, and FMCG industries. We ll offer you expert support and advice throughout the process to ensure you select and secure a career-defining role.
Dec 04, 2025
Full time
CNC Machinist - Millers / Turners available Days Birmingham Permanent £17 - £18 per hour The Opportunity: EMBS Engineering is currently recruiting for CNC Machinists - Both Millers & Turners required to join a precision engineering company located in Birmingham on a permanent basis . Our client is a well-established advanced manufacturing business that specialises in machining small, sub assembly components for high profile, leading organisations within the aerospace industry. Due to the nature of the markets our client supplies into, all candidates must be UK residents, and DBS checks will be required. Please note we cannot offer visa sponsorship for overseas candidates. Key Benefits on offer: £17 - £18 per hour Opportunity to work with state-of-the-art machinery Hours: Day shift, flexible start and finish time Overtime available Permanent position offering stability and longevity, coupled with the chance to be part of an amazing, growing organisation that is currently expanding Your responsibilities include: Set up, program, and operate CNC lathes and/or milling machines Work to tight tolerances using engineering drawings and specifications Inspect finished parts to ensure quality standards are met Perform machine maintenance and support continuous improvement initiatives Collaborate with engineers and production staff to optimise workflow and efficiency Successful applicants MUST be able to demonstrate: Minimum of 3 years experience programming, setting and operating multi axis machines using online controls If Milling biased - must have Heidenhain controls experience If Turning biased - must have Fanuc controls experience Worked with multi-axis machines Ability to work from engineering drawings Previous experience of machining complex components, within highly regulated industries including Aerospace, Automotive, Motorsport, F1, Defence, Oil & Gas, Nuclear, Petrochemical, Marine Knowledge of offline programming experience using Fusion 360 would be preferable If you are interested in the opportunity of CNC Machinist above and believe you meet the illustrated criteria, apply today to join our clients growing Machining department located in Birmingham. About us: EMBS Engineering is a dedicated talent specialist that partners with some of the UK's most prestigious, advanced, precision engineering companies within the Aerospace, Automotive / Motorsport, Nuclear, Oil & Gas, Green, Environmental, and FMCG industries. We ll offer you expert support and advice throughout the process to ensure you select and secure a career-defining role.
An excellent opportunity for an experienced Manual / CNC Machinist to join a precision engine machining company! Job Type: Full-Time, Permanent. Salary: £35,000 - £40,000 Per Annum, Depending on Experience. Location: Godstone, Surrey RH9. About The Company: Are you passionate about engineering excellence and classic performance? The company are a renowned high-precision engine machine shop specialising in the restoration and machining of high-end classic engines - from iconic Ferraris to legendary Jaguars. With decades of experience and a reputation for uncompromising quality, they take pride in breathing new life into some of the world's most revered classic engines. What They Are Looking For: Driven and detail-oriented individuals to join our skilled team. Whether you're an experienced engine machinist, CNC specialist, or precision technician, if you take pride in meticulous workmanship and have a love for classic cars, they want to hear from you. Key Responsibilities: High-precision machining of engine components to exact tolerances Operation of manual and CNC equipment Restoration and rebuilding of classic engine parts Inspection and measurement to ensure adherence to quality standards Collaboration with a small, passionate team dedicated to engineering excellence Candidate Requirements: Experience in engine machining or precision engineering (classic engine experience a bonus) Ability to read and work from technical drawings Excellent attention to detail and problem-solving skills Strong work ethic and a passion for classic vehicles A commitment to high standards and craftsmanship Company Benefits: A chance to work on some of the world's most celebrated classic engines A supportive and highly skilled team environment Opportunities to develop and refine your skills with rare and complex engine builds Competitive salary based on experience A role where your precision and passion truly matter Additional leave Company pension Private dental insurance Private medical insurance If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Dec 03, 2025
Full time
An excellent opportunity for an experienced Manual / CNC Machinist to join a precision engine machining company! Job Type: Full-Time, Permanent. Salary: £35,000 - £40,000 Per Annum, Depending on Experience. Location: Godstone, Surrey RH9. About The Company: Are you passionate about engineering excellence and classic performance? The company are a renowned high-precision engine machine shop specialising in the restoration and machining of high-end classic engines - from iconic Ferraris to legendary Jaguars. With decades of experience and a reputation for uncompromising quality, they take pride in breathing new life into some of the world's most revered classic engines. What They Are Looking For: Driven and detail-oriented individuals to join our skilled team. Whether you're an experienced engine machinist, CNC specialist, or precision technician, if you take pride in meticulous workmanship and have a love for classic cars, they want to hear from you. Key Responsibilities: High-precision machining of engine components to exact tolerances Operation of manual and CNC equipment Restoration and rebuilding of classic engine parts Inspection and measurement to ensure adherence to quality standards Collaboration with a small, passionate team dedicated to engineering excellence Candidate Requirements: Experience in engine machining or precision engineering (classic engine experience a bonus) Ability to read and work from technical drawings Excellent attention to detail and problem-solving skills Strong work ethic and a passion for classic vehicles A commitment to high standards and craftsmanship Company Benefits: A chance to work on some of the world's most celebrated classic engines A supportive and highly skilled team environment Opportunities to develop and refine your skills with rare and complex engine builds Competitive salary based on experience A role where your precision and passion truly matter Additional leave Company pension Private dental insurance Private medical insurance If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
CNC Machinist - Millers / Turners available Days Birmingham Permanent £17 - £18 per hour The Opportunity: EMBS Engineering is currently recruiting for CNC Machinists - Both Millers & Turners required to join a precision engineering company located in Birmingham on a permanent basis . Our client is a well-established advanced manufacturing business that specialises in machining small, sub assembly components for high profile, leading organisations within the aerospace industry. Due to the nature of the markets our client supplies into, all candidates must be UK residents, and DBS checks will be required. Please note we cannot offer visa sponsorship for overseas candidates. Key Benefits on offer: £17 - £18 per hour Opportunity to work with state-of-the-art machinery Hours: Day shift, flexible start and finish time Overtime available Permanent position offering stability and longevity, coupled with the chance to be part of an amazing, growing organisation that is currently expanding Your responsibilities include: Set up, program, and operate CNC lathes and/or milling machines Work to tight tolerances using engineering drawings and specifications Inspect finished parts to ensure quality standards are met Perform machine maintenance and support continuous improvement initiatives Collaborate with engineers and production staff to optimise workflow and efficiency Successful applicants MUST be able to demonstrate: Minimum of 3 years experience programming, setting and operating multi axis machines using online controls If Milling biased - must have Heidenhain controls experience If Turning biased - must have Fanuc controls experience Worked with multi-axis machines Ability to work from engineering drawings Previous experience of machining complex components, within highly regulated industries including Aerospace, Automotive, Motorsport, F1, Defence, Oil & Gas, Nuclear, Petrochemical, Marine Knowledge of offline programming experience using Fusion 360 would be preferable If you are interested in the opportunity of CNC Machinist above and believe you meet the illustrated criteria, apply today to join our clients growing Machining department located in Birmingham. About us: EMBS Engineering is a dedicated talent specialist that partners with some of the UK's most prestigious, advanced, precision engineering companies within the Aerospace, Automotive / Motorsport, Nuclear, Oil & Gas, Green, Environmental, and FMCG industries. We ll offer you expert support and advice throughout the process to ensure you select and secure a career-defining role.
Oct 08, 2025
Full time
CNC Machinist - Millers / Turners available Days Birmingham Permanent £17 - £18 per hour The Opportunity: EMBS Engineering is currently recruiting for CNC Machinists - Both Millers & Turners required to join a precision engineering company located in Birmingham on a permanent basis . Our client is a well-established advanced manufacturing business that specialises in machining small, sub assembly components for high profile, leading organisations within the aerospace industry. Due to the nature of the markets our client supplies into, all candidates must be UK residents, and DBS checks will be required. Please note we cannot offer visa sponsorship for overseas candidates. Key Benefits on offer: £17 - £18 per hour Opportunity to work with state-of-the-art machinery Hours: Day shift, flexible start and finish time Overtime available Permanent position offering stability and longevity, coupled with the chance to be part of an amazing, growing organisation that is currently expanding Your responsibilities include: Set up, program, and operate CNC lathes and/or milling machines Work to tight tolerances using engineering drawings and specifications Inspect finished parts to ensure quality standards are met Perform machine maintenance and support continuous improvement initiatives Collaborate with engineers and production staff to optimise workflow and efficiency Successful applicants MUST be able to demonstrate: Minimum of 3 years experience programming, setting and operating multi axis machines using online controls If Milling biased - must have Heidenhain controls experience If Turning biased - must have Fanuc controls experience Worked with multi-axis machines Ability to work from engineering drawings Previous experience of machining complex components, within highly regulated industries including Aerospace, Automotive, Motorsport, F1, Defence, Oil & Gas, Nuclear, Petrochemical, Marine Knowledge of offline programming experience using Fusion 360 would be preferable If you are interested in the opportunity of CNC Machinist above and believe you meet the illustrated criteria, apply today to join our clients growing Machining department located in Birmingham. About us: EMBS Engineering is a dedicated talent specialist that partners with some of the UK's most prestigious, advanced, precision engineering companies within the Aerospace, Automotive / Motorsport, Nuclear, Oil & Gas, Green, Environmental, and FMCG industries. We ll offer you expert support and advice throughout the process to ensure you select and secure a career-defining role.
CNC Machinist - 4 day working week 38,000 - 42,000 + Overtime + Training Monday - Thursday, 05:30 - 15:00 Week 1, 14:45 - 00:15 Week 2 - Earlies & Lates Failsworth, Manchester Do you have CNC Milling / Turning experience on 3 & 5 axis machinery? Do you want an exciting new role on a 4 day working week pattern offering excellent work/life balance with early & late shifts? Are you looking to join an industry leading manufacturing and engineering employer known for their excellent retention, first class training and development? Due to continued growth, my client is looking for a CNC machinist to join the team, working out of their state of the art facility near Failsworth. The successful applicant will be responsible for setting, operating and maintaining milling machinery however, if you have turning experience, full training will be provided to enhance your skillset. You will be working to product drawings and specifications, inspecting parts to ensure all company, industry and customer standards are met. You will play a key role to ensure that the production team operate as efficiently as possible while maintaining these high standards. On offer is the chance to join an industry leading employer that service some of the biggest engineering, manufacturing and aviation companies across the world. This is a great time to join an established company going through a period of rapid expansion offering a great long term challenge. For more information please click apply and contact Patrick Walsh - REF4487 - (phone number removed). The Role: Setting & Operating Machinery Working with the machining and engineering teams Excellent training provided The Candidate: Milling experience is desired - training will be provided Able to commute to Manchester 3 & 5 axis machinery experience Consultant: Patrick Walsh elix Sourcing Solutions are a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. CNC Programmer CNC Machinist 3 Axis 5 Axis Machining Aerospace Engineering Training AS9100 ISO9001 Production Manufacturing Manufactured Manufacturer Senior Training Milling Turning Manchester Oldham Bolton Stockport Warrington Glossop St Helens
Oct 08, 2025
Full time
CNC Machinist - 4 day working week 38,000 - 42,000 + Overtime + Training Monday - Thursday, 05:30 - 15:00 Week 1, 14:45 - 00:15 Week 2 - Earlies & Lates Failsworth, Manchester Do you have CNC Milling / Turning experience on 3 & 5 axis machinery? Do you want an exciting new role on a 4 day working week pattern offering excellent work/life balance with early & late shifts? Are you looking to join an industry leading manufacturing and engineering employer known for their excellent retention, first class training and development? Due to continued growth, my client is looking for a CNC machinist to join the team, working out of their state of the art facility near Failsworth. The successful applicant will be responsible for setting, operating and maintaining milling machinery however, if you have turning experience, full training will be provided to enhance your skillset. You will be working to product drawings and specifications, inspecting parts to ensure all company, industry and customer standards are met. You will play a key role to ensure that the production team operate as efficiently as possible while maintaining these high standards. On offer is the chance to join an industry leading employer that service some of the biggest engineering, manufacturing and aviation companies across the world. This is a great time to join an established company going through a period of rapid expansion offering a great long term challenge. For more information please click apply and contact Patrick Walsh - REF4487 - (phone number removed). The Role: Setting & Operating Machinery Working with the machining and engineering teams Excellent training provided The Candidate: Milling experience is desired - training will be provided Able to commute to Manchester 3 & 5 axis machinery experience Consultant: Patrick Walsh elix Sourcing Solutions are a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. CNC Programmer CNC Machinist 3 Axis 5 Axis Machining Aerospace Engineering Training AS9100 ISO9001 Production Manufacturing Manufactured Manufacturer Senior Training Milling Turning Manchester Oldham Bolton Stockport Warrington Glossop St Helens
The Opportunity: EMBS Engineering is currently recruiting for a CNC Miller to join a precision engineering company located in Birmingham, working on a 3-6 month contracting basis. Key Responsibilities: Setting and operating multi-axis CNC Milling machines Working from Engineering drawings / 3D model Essential Requirements: Unrestricted right to work in the UK. Minimum of 3 years editing / programming, Milling machines using online Heidenhain controls Worked with multi-pallet, multi-axis machines Ability to work from engineering drawings Previous experience of machining complex components, ideally within aerospace How to Apply: If you are a skilled CNC Miller with relevant experience, we encourage you to apply. Please click the link to submit your application. About us: EMBS Engineering is a dedicated talent specialist partnering with leading UK companies across diverse, advanced precision engineering sectors, including Aerospace, Automotive/Motorsport, Nuclear, Oil & Gas, Green/Environmental, and FMCG. We are committed to providing expert support and guidance throughout your job search to help you secure a career-defining role.
Oct 07, 2025
Contractor
The Opportunity: EMBS Engineering is currently recruiting for a CNC Miller to join a precision engineering company located in Birmingham, working on a 3-6 month contracting basis. Key Responsibilities: Setting and operating multi-axis CNC Milling machines Working from Engineering drawings / 3D model Essential Requirements: Unrestricted right to work in the UK. Minimum of 3 years editing / programming, Milling machines using online Heidenhain controls Worked with multi-pallet, multi-axis machines Ability to work from engineering drawings Previous experience of machining complex components, ideally within aerospace How to Apply: If you are a skilled CNC Miller with relevant experience, we encourage you to apply. Please click the link to submit your application. About us: EMBS Engineering is a dedicated talent specialist partnering with leading UK companies across diverse, advanced precision engineering sectors, including Aerospace, Automotive/Motorsport, Nuclear, Oil & Gas, Green/Environmental, and FMCG. We are committed to providing expert support and guidance throughout your job search to help you secure a career-defining role.
CNC Machining Marketing Specialist - Interesting and varied engineering & social marketing role. You will need a strong understanding of CNC programming and an understanding of social media marketing. This high tech engineering software company are seeking to cultivate a strong online presence within the machining sector, primarily through video content on platforms like Instagram, YouTube, and Lin click apply for full job details
Oct 07, 2025
Full time
CNC Machining Marketing Specialist - Interesting and varied engineering & social marketing role. You will need a strong understanding of CNC programming and an understanding of social media marketing. This high tech engineering software company are seeking to cultivate a strong online presence within the machining sector, primarily through video content on platforms like Instagram, YouTube, and Lin click apply for full job details
CNC Machinist (Great Progression/ Training) 28,000 - 40,000 + 15% Shift Allowance + Extensive Overtime Opportunities + Excellent Technical Training (Into Programming/Milling/Turning) + Exciting Salary Progression Scheme + Life Insurance + 30 days holiday + 5% Pension + Early Finish Friday Commutable from Bridgewater, Taunton, Highbridge, Street, Minehead, Yeovil and the surrounding areas Are you a CNC Machinist, CNC Turner, CNC Miller or CNC Programmer looking to join a globally renowned company, offering you the chance to gain further technical CNC skills whilst giving you the chance to maximise your earning potential through extensive overtime and bonuses, all whilst working on innovative products within a great organization that offers a state of the art workshop environment. This is a fantastic opportunity for a CNC Machinist/Programmer looking to advance their career within a market-leading company, offering a long-term career with progression opportunities for exceptional candidates as well as plenty of Overtime opportunities. This company are a world leading manufacturer of specialist components across a range of different industries. They are a well-established, growing and close-knit team and have developed a large and varied client base and now require a CNC Machinist/Programmer to help them move into their next exciting phase of development. In this role you will be responsible for the programming, setting and operating a range of different CNC machines to produce high quality manufactured parts. The role is shift based, with an early finish Friday as well as optional overtime opportunities. This role would suit an established CNC Machinist/ Programmer who is looking to develop further skills, maximise their earning potential through overtime, bonuses and shift allowances and work within a positive and inclusive environment. The Role: Programming, setting and operating a variety of CNC Machinery Working on a double days position, earlies and lates Further training and career progression throughout the company The Person: CNC Machining background Experience with either Milling or Turning Commutable to Bridgewater, Taunton, Highbridge, Street, Minehead, Yeovil and the surrounding areas Looking for training, progression and a great working environment To apply for this role or for to be considered for further roles, please click "Apply Now" or contact Dyon Douglas-Whyte at Rise Technical Recruitment. This vacancy is being advertised by Rise Technical Recruitment Ltd. The services of Rise Technical Recruitment Ltd are that of an Employment Agency. Rise Technical Recruitment Ltd regrets to inform that our client can only accept applications from engineering candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
Oct 06, 2025
Full time
CNC Machinist (Great Progression/ Training) 28,000 - 40,000 + 15% Shift Allowance + Extensive Overtime Opportunities + Excellent Technical Training (Into Programming/Milling/Turning) + Exciting Salary Progression Scheme + Life Insurance + 30 days holiday + 5% Pension + Early Finish Friday Commutable from Bridgewater, Taunton, Highbridge, Street, Minehead, Yeovil and the surrounding areas Are you a CNC Machinist, CNC Turner, CNC Miller or CNC Programmer looking to join a globally renowned company, offering you the chance to gain further technical CNC skills whilst giving you the chance to maximise your earning potential through extensive overtime and bonuses, all whilst working on innovative products within a great organization that offers a state of the art workshop environment. This is a fantastic opportunity for a CNC Machinist/Programmer looking to advance their career within a market-leading company, offering a long-term career with progression opportunities for exceptional candidates as well as plenty of Overtime opportunities. This company are a world leading manufacturer of specialist components across a range of different industries. They are a well-established, growing and close-knit team and have developed a large and varied client base and now require a CNC Machinist/Programmer to help them move into their next exciting phase of development. In this role you will be responsible for the programming, setting and operating a range of different CNC machines to produce high quality manufactured parts. The role is shift based, with an early finish Friday as well as optional overtime opportunities. This role would suit an established CNC Machinist/ Programmer who is looking to develop further skills, maximise their earning potential through overtime, bonuses and shift allowances and work within a positive and inclusive environment. The Role: Programming, setting and operating a variety of CNC Machinery Working on a double days position, earlies and lates Further training and career progression throughout the company The Person: CNC Machining background Experience with either Milling or Turning Commutable to Bridgewater, Taunton, Highbridge, Street, Minehead, Yeovil and the surrounding areas Looking for training, progression and a great working environment To apply for this role or for to be considered for further roles, please click "Apply Now" or contact Dyon Douglas-Whyte at Rise Technical Recruitment. This vacancy is being advertised by Rise Technical Recruitment Ltd. The services of Rise Technical Recruitment Ltd are that of an Employment Agency. Rise Technical Recruitment Ltd regrets to inform that our client can only accept applications from engineering candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
Applications Engineer (CNC Milling/Turning) Coventry 35,000 - 45,000 + Training + Progression + Company Car + Healthcare Excellent opportunity for an Applications Engineer or someone looking to get into Applications Engineering who has a strong background working with CNC milling and turning who is looking for excellent training from a market leading company. Do you have experience in setting, operating and programming CNC milling and turning machines? Are you looking to work in a mobile role working with state of the art equipment while receiving specialist training? This company have been established for over 60 years and have been a leading name in the sale, distribution, install and service of state of the art machining centres the world over. They pride themselves in delivering the most technologically advanced equipment to their global customers and due to their continued success they are now looking to add to their specialist team. In this role you will be working in a mobile role where you will be working on post-commissioning applications for their customers. You will be visiting their sites, giving customer training and working with them to show them the full manufacturing capabilities of their equipment. This role will be based around the Midlands but some UK wide travel may be required. The Role: Giving demonstration and customer training on state of the art equipment Receiving specialist training on state of the art equipment Mobile role covering a local patch with some UK wide travel The Person: Applications Engineer or previous experience in CNC milling and turning Looking for specialist training on state of the art machinery Progression opportunities and excellent benefits with a market leading company Reference: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Adam Peters at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Oct 06, 2025
Full time
Applications Engineer (CNC Milling/Turning) Coventry 35,000 - 45,000 + Training + Progression + Company Car + Healthcare Excellent opportunity for an Applications Engineer or someone looking to get into Applications Engineering who has a strong background working with CNC milling and turning who is looking for excellent training from a market leading company. Do you have experience in setting, operating and programming CNC milling and turning machines? Are you looking to work in a mobile role working with state of the art equipment while receiving specialist training? This company have been established for over 60 years and have been a leading name in the sale, distribution, install and service of state of the art machining centres the world over. They pride themselves in delivering the most technologically advanced equipment to their global customers and due to their continued success they are now looking to add to their specialist team. In this role you will be working in a mobile role where you will be working on post-commissioning applications for their customers. You will be visiting their sites, giving customer training and working with them to show them the full manufacturing capabilities of their equipment. This role will be based around the Midlands but some UK wide travel may be required. The Role: Giving demonstration and customer training on state of the art equipment Receiving specialist training on state of the art equipment Mobile role covering a local patch with some UK wide travel The Person: Applications Engineer or previous experience in CNC milling and turning Looking for specialist training on state of the art machinery Progression opportunities and excellent benefits with a market leading company Reference: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Adam Peters at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Job Title: CNC Programmer - Mazatrol Job Type: Permanent Location: Oldham Salary: £45K-£50K (Back Shift Only) Overtime: Widely / x2 Shift Pattern: Straight Back Shift: Monday - Thursday, 4:30pm - 2:30am (Friday Off) Company Overview: Specialising in the design, manufacture, and assembly of precision components for the defence sector, our client is an industry leader backed by a global group. They are now looking to add an experienced CNC Mazatrol Programmer to their growing team. Job Description: As a CNC Mazatrol Programmer/Setter/Operator, you will be responsible for: Programming complex components directly at the machine using Mazatrol on Mazak Integrex i200 / j200 machines Reading and interpreting technical engineering drawings Setting up tools and work holding with correct offsets Uploading and editing programs where needed Running jobs from start to finish, ensuring top-quality standards Working on one-off and small batch, high-precision parts Ideal Candidate Will: Have solid experience programming, setting, and operating Mazak Integrex machines using Mazatrol (Other Mazak Machine experience considered) Be confident working to tight tolerances in a high-precision environment Ideally have served an engineering apprenticeship (though experience is key) Be capable of working independently or as part of a small team Be quality-focused with excellent attention to detail Be flexible to support overtime as required Have a proactive, professional attitude with good organisational skills Benefits Include: Company Pension Scheme Death in Service Cover Paid time for Dentist/Hospital appointments Fridays Off 33 Days Holiday (Including 8 Bank Holidays) 5 Days Paid Sick Leave Great shop-floor culture Onsite Parking Opportunity to work in a secure and growing sector (Defence) Clear progression and training opportunities What Next? If you're an experienced Mazak Integrex Programmer and this sounds like the right fit, site visits are encouraged so you can meet the team and see the workshop first-hand. Contact Antony Brunn on (phone number removed) or email (url removed) to arrange a visit or for more information. Immediate starts available! About Us: WF Tech are responsible for placing skilled and in demand people on both a permanent and contract basis into the Precision & Advanced Manufacturing sectors, from skilled Machining Personnel and Specialist Engineers to Supervisory and Management positions. Our Specialist Consultants will have an in-depth understanding of your skills and offer best advice on your next step We are always searching for the best talent, so if you know anyone, why not recommend someone to one of our professional team who will be more than happy to help. MEAB
Oct 03, 2025
Full time
Job Title: CNC Programmer - Mazatrol Job Type: Permanent Location: Oldham Salary: £45K-£50K (Back Shift Only) Overtime: Widely / x2 Shift Pattern: Straight Back Shift: Monday - Thursday, 4:30pm - 2:30am (Friday Off) Company Overview: Specialising in the design, manufacture, and assembly of precision components for the defence sector, our client is an industry leader backed by a global group. They are now looking to add an experienced CNC Mazatrol Programmer to their growing team. Job Description: As a CNC Mazatrol Programmer/Setter/Operator, you will be responsible for: Programming complex components directly at the machine using Mazatrol on Mazak Integrex i200 / j200 machines Reading and interpreting technical engineering drawings Setting up tools and work holding with correct offsets Uploading and editing programs where needed Running jobs from start to finish, ensuring top-quality standards Working on one-off and small batch, high-precision parts Ideal Candidate Will: Have solid experience programming, setting, and operating Mazak Integrex machines using Mazatrol (Other Mazak Machine experience considered) Be confident working to tight tolerances in a high-precision environment Ideally have served an engineering apprenticeship (though experience is key) Be capable of working independently or as part of a small team Be quality-focused with excellent attention to detail Be flexible to support overtime as required Have a proactive, professional attitude with good organisational skills Benefits Include: Company Pension Scheme Death in Service Cover Paid time for Dentist/Hospital appointments Fridays Off 33 Days Holiday (Including 8 Bank Holidays) 5 Days Paid Sick Leave Great shop-floor culture Onsite Parking Opportunity to work in a secure and growing sector (Defence) Clear progression and training opportunities What Next? If you're an experienced Mazak Integrex Programmer and this sounds like the right fit, site visits are encouraged so you can meet the team and see the workshop first-hand. Contact Antony Brunn on (phone number removed) or email (url removed) to arrange a visit or for more information. Immediate starts available! About Us: WF Tech are responsible for placing skilled and in demand people on both a permanent and contract basis into the Precision & Advanced Manufacturing sectors, from skilled Machining Personnel and Specialist Engineers to Supervisory and Management positions. Our Specialist Consultants will have an in-depth understanding of your skills and offer best advice on your next step We are always searching for the best talent, so if you know anyone, why not recommend someone to one of our professional team who will be more than happy to help. MEAB
CNC Turner 32,000 - 38,000 + Early Friday Finish + Training + Benefits Monday - Thursday, 08:00 - 17:00, 08:00 - 14:30 Friday Leighton Buzzard Do you have CNC turning and programming experience? Are you looking for a new role within an industry leading engineering company known for their excellent staff retention who are offering a Monday to Friday days role and great training opportunities? Due to continued growth and securing new contracts, my client is looking for CNC turners with programming experience to join the team, working out of their state of the art facility near Leighton Buzzard. The successful applicant will be responsible for setting, operating and programming CNC lathes. You will be working to product drawings and specifications, inspecting parts to ensure all company, industry and customer standards are met. You will play a key role to ensure that the production team operate as efficiently as possible while maintaining these high standards. This is an excellent opportunity within a successful manufacturer who are at the fore front of their sector that are continuing to expand in every department. You will be joining a growing, loyal and experienced CNC & production team within a company who pride themselves on staff retention and development. For more information please click apply and contact Patrick Walsh - REF 4481 - (phone number removed) The Role: Setting, Programming & Operating CNC Lathes Monday - Friday Inspecting machined parts The Candidate: Has worked with Manual Guide I & G Codes CNC machining and programming experience (Turning) A commutable distance to Leighton Buzzard Consultant: Patrick Walsh elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. CNC Programmer Programming 5 Axis Turner Operator Machinist Mechanical Defence Aerospace 4 day week Overtime Motorsport Production Manufacturing Engineer Engineering Manufacture Days Production Manufacture Manufacturing Leighton Buzzard Luton Dunstable Aylesbury Luton Milton Keynes
Oct 03, 2025
Full time
CNC Turner 32,000 - 38,000 + Early Friday Finish + Training + Benefits Monday - Thursday, 08:00 - 17:00, 08:00 - 14:30 Friday Leighton Buzzard Do you have CNC turning and programming experience? Are you looking for a new role within an industry leading engineering company known for their excellent staff retention who are offering a Monday to Friday days role and great training opportunities? Due to continued growth and securing new contracts, my client is looking for CNC turners with programming experience to join the team, working out of their state of the art facility near Leighton Buzzard. The successful applicant will be responsible for setting, operating and programming CNC lathes. You will be working to product drawings and specifications, inspecting parts to ensure all company, industry and customer standards are met. You will play a key role to ensure that the production team operate as efficiently as possible while maintaining these high standards. This is an excellent opportunity within a successful manufacturer who are at the fore front of their sector that are continuing to expand in every department. You will be joining a growing, loyal and experienced CNC & production team within a company who pride themselves on staff retention and development. For more information please click apply and contact Patrick Walsh - REF 4481 - (phone number removed) The Role: Setting, Programming & Operating CNC Lathes Monday - Friday Inspecting machined parts The Candidate: Has worked with Manual Guide I & G Codes CNC machining and programming experience (Turning) A commutable distance to Leighton Buzzard Consultant: Patrick Walsh elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. CNC Programmer Programming 5 Axis Turner Operator Machinist Mechanical Defence Aerospace 4 day week Overtime Motorsport Production Manufacturing Engineer Engineering Manufacture Days Production Manufacture Manufacturing Leighton Buzzard Luton Dunstable Aylesbury Luton Milton Keynes
Technical Manager (Castings / Foundry) 40,000 - 50,000 + Training + Days based + Monday - Friday + No weekends + Excellent company benefits Trafford (Commutable from: Manchester, Warrington, Stockport, Knutsford, Stretford, Eccles) Are you from a Castings, Foundry or Metallurgy background and are looking for an excellent opportunity to step into a senior management position within a market-leading organisation with clear long-term progression and specialist training to develop your skillset further? On offer is the chance to work within a company who are an industry leader within their field and have developed a fantastic reputation due to the training they provide their staff. Due to the company's recent success, they are now in a period of growth and are looking to expand upon their current team. They are a renowned manufacturer, boasting high-quality products and brilliant service for their customers, as well as great staff retention, offering continual training and progression. In this dynamic role, you will oversee and provide technical support to all departments on all processes in the business. The role offers great autonomy and will also require you to occasionally work hands-on across continuous improvements, enabling you to put your own stamp on company processes. This role would suit a highly-technical engineer from a Castings, Foundry or Metallurgy background looking to take the technical lead in an industry-leading company. The Role Overseeing and providing technical support Technical management of production Monday - Friday (Friday Early Finish) The Person Experience with managing or leading a team Casting, Foundry or Metallurgy background Commutable to Trafford Foundry, Casting, Investment Casting, Metallurgy, Manufacturing, Manager, Management, Fabrication, Supervisor, Production, Metal, Finishing, CNC, Machining, Training, Progression, Holidays, Competitive Salary, Company Benefits, Monday to Friday, Trafford, Manchester, Warrington, Stockport, Knutsford, Stretford, Eccles, UK Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Josh Cooper at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Oct 03, 2025
Full time
Technical Manager (Castings / Foundry) 40,000 - 50,000 + Training + Days based + Monday - Friday + No weekends + Excellent company benefits Trafford (Commutable from: Manchester, Warrington, Stockport, Knutsford, Stretford, Eccles) Are you from a Castings, Foundry or Metallurgy background and are looking for an excellent opportunity to step into a senior management position within a market-leading organisation with clear long-term progression and specialist training to develop your skillset further? On offer is the chance to work within a company who are an industry leader within their field and have developed a fantastic reputation due to the training they provide their staff. Due to the company's recent success, they are now in a period of growth and are looking to expand upon their current team. They are a renowned manufacturer, boasting high-quality products and brilliant service for their customers, as well as great staff retention, offering continual training and progression. In this dynamic role, you will oversee and provide technical support to all departments on all processes in the business. The role offers great autonomy and will also require you to occasionally work hands-on across continuous improvements, enabling you to put your own stamp on company processes. This role would suit a highly-technical engineer from a Castings, Foundry or Metallurgy background looking to take the technical lead in an industry-leading company. The Role Overseeing and providing technical support Technical management of production Monday - Friday (Friday Early Finish) The Person Experience with managing or leading a team Casting, Foundry or Metallurgy background Commutable to Trafford Foundry, Casting, Investment Casting, Metallurgy, Manufacturing, Manager, Management, Fabrication, Supervisor, Production, Metal, Finishing, CNC, Machining, Training, Progression, Holidays, Competitive Salary, Company Benefits, Monday to Friday, Trafford, Manchester, Warrington, Stockport, Knutsford, Stretford, Eccles, UK Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Josh Cooper at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Burton and South Derbyshire College
Swadlincote, Derbyshire
Engineering Course Leader (Tutor)Full time: 37 hours per week Location: Stephen Burke Construction Academy, SwadlincoteSalary: Up to £34,948 pro rataPLUS £4,500 'Golden Hello' staged over 3 yearsPLUS Bursary up to £1,800 per year (qualification level dependent)PLUS, up to £11,000 professional development bursary for formal education and training qualifications including:Level 3-5 Education & TeachingLevel 3 TAQA Assessor QualificationLevel 4 TAQA Internal Quality Assurance QualificationLevel 4 Engineering Who are we looking for? Burton and South Derbyshire College is seeking to appoint a qualified, committed and enthusiastic individual to join our Engineering team to deliver and lead on a range of full-time programmes. Applicants will require working knowledge and experience within the areas of Engineering and Manufacturing with a focus on technical skills and machining, CNC experience would be desirable. You will teach across a range of Engineering courses and modules aligned to your occupational skill set in order to deliver a high quality provision to our learners. In this role you will be required to demonstrate innovative teaching and learning, coupled with excellent communication skills to motivate and guide learners to succeed. Applicants will ideally hold a relevant Higher Education qualification in Engineering or related subjects and have industrial experience alongside appropriate teaching and assessing qualifications. The College welcomes applications from vocational specialists who desire to pursue a career in further education and is therefore prepared to offer training for individuals to gain a recognised teaching qualification alongside this role. For industry professionals looking to move into teaching in further education there is also the opportunity to apply for government grant scheme with payments of up to £6,000 per annum, whilst studying teacher training programmes. We will also welcome graduate applications for this role, on our Graduate Teaching Programme If you feel you have the skills, motivation and understanding for this role, we would love to hear from you. If you are viewing the advert via a 3rd party job board please visit work-for-us/vacancies for the full job advert and job description, for more information please contact Why come and work for us? Burton and South Derbyshire College is an Ofsted outstanding College. We value our employees and have a number of additional benefits to offer the successful applicant: Generous pension schemes for academic and support staff Generous holiday plans Free Employee Assistance Programme Flexible working policies Competitive maternity, paternity and adoption leave Excellent staff training programme, including two staff development days per year On-site nursery with Good Ofsted rating Cycle to Work Scheme Free annual eye tests Access to our onsite gym Staff discounts at our fine dining restaurant, The Mulberry, our Mulberry Bistro and Innovations Hair and Beauty salon Reward and recognition through our Employee of the Month scheme Discounted health cash plan BHN Extras discount scheme Burton and South Derbyshire College are committed to creating a diverse and inclusive culture and you should share those values. We would welcome applications from all candidates, including under-represented groups in respect of age, disability, sex, gender or gender identity, ethnicity, race, religion or belief, sexual orientation or transgender status which would reflect our diverse community. The College is registered with the Disclosure and Barring Service and the successful applicants for this post will be required to apply for the Disclosure at the enhanced level. In addition, internet searches will be undertaken in accordance with the KCSIE guidance. The College is committed to safeguarding and promoting the welfare of young people/vulnerable adults and expect all staff and volunteers to share this commitment. We are committed to a sustainability agenda and are working hard towards achieving a net zero environmental impact. We aim to embed this in our culture with our staff, learners, visitors and suppliers all expected to show dedication towards reducing our carbon footprint. The closing date for receipt of applications is 12 noon, Thursday 16th October 2 025 . Please see our "Work For Us" page on the College website for more information on how to complete the application. Please note late applications are not acceptable.
Oct 02, 2025
Full time
Engineering Course Leader (Tutor)Full time: 37 hours per week Location: Stephen Burke Construction Academy, SwadlincoteSalary: Up to £34,948 pro rataPLUS £4,500 'Golden Hello' staged over 3 yearsPLUS Bursary up to £1,800 per year (qualification level dependent)PLUS, up to £11,000 professional development bursary for formal education and training qualifications including:Level 3-5 Education & TeachingLevel 3 TAQA Assessor QualificationLevel 4 TAQA Internal Quality Assurance QualificationLevel 4 Engineering Who are we looking for? Burton and South Derbyshire College is seeking to appoint a qualified, committed and enthusiastic individual to join our Engineering team to deliver and lead on a range of full-time programmes. Applicants will require working knowledge and experience within the areas of Engineering and Manufacturing with a focus on technical skills and machining, CNC experience would be desirable. You will teach across a range of Engineering courses and modules aligned to your occupational skill set in order to deliver a high quality provision to our learners. In this role you will be required to demonstrate innovative teaching and learning, coupled with excellent communication skills to motivate and guide learners to succeed. Applicants will ideally hold a relevant Higher Education qualification in Engineering or related subjects and have industrial experience alongside appropriate teaching and assessing qualifications. The College welcomes applications from vocational specialists who desire to pursue a career in further education and is therefore prepared to offer training for individuals to gain a recognised teaching qualification alongside this role. For industry professionals looking to move into teaching in further education there is also the opportunity to apply for government grant scheme with payments of up to £6,000 per annum, whilst studying teacher training programmes. We will also welcome graduate applications for this role, on our Graduate Teaching Programme If you feel you have the skills, motivation and understanding for this role, we would love to hear from you. If you are viewing the advert via a 3rd party job board please visit work-for-us/vacancies for the full job advert and job description, for more information please contact Why come and work for us? Burton and South Derbyshire College is an Ofsted outstanding College. We value our employees and have a number of additional benefits to offer the successful applicant: Generous pension schemes for academic and support staff Generous holiday plans Free Employee Assistance Programme Flexible working policies Competitive maternity, paternity and adoption leave Excellent staff training programme, including two staff development days per year On-site nursery with Good Ofsted rating Cycle to Work Scheme Free annual eye tests Access to our onsite gym Staff discounts at our fine dining restaurant, The Mulberry, our Mulberry Bistro and Innovations Hair and Beauty salon Reward and recognition through our Employee of the Month scheme Discounted health cash plan BHN Extras discount scheme Burton and South Derbyshire College are committed to creating a diverse and inclusive culture and you should share those values. We would welcome applications from all candidates, including under-represented groups in respect of age, disability, sex, gender or gender identity, ethnicity, race, religion or belief, sexual orientation or transgender status which would reflect our diverse community. The College is registered with the Disclosure and Barring Service and the successful applicants for this post will be required to apply for the Disclosure at the enhanced level. In addition, internet searches will be undertaken in accordance with the KCSIE guidance. The College is committed to safeguarding and promoting the welfare of young people/vulnerable adults and expect all staff and volunteers to share this commitment. We are committed to a sustainability agenda and are working hard towards achieving a net zero environmental impact. We aim to embed this in our culture with our staff, learners, visitors and suppliers all expected to show dedication towards reducing our carbon footprint. The closing date for receipt of applications is 12 noon, Thursday 16th October 2 025 . Please see our "Work For Us" page on the College website for more information on how to complete the application. Please note late applications are not acceptable.
Maintenance Engineer Location: Wednesbury Salary: £50,000 (Nights) + Overtime Shifts: Double Days OR Nights Holidays: 27 Days + Bank Holidays Training: PLC, CNC, FLT & HNC Progression The Company A global manufacturer with multiple UK sites is looking for experienced Maintenance Engineers to join their growing team. Supplying directly into the automotive sector, they are recognised for their cutting-edge automation and robotics facilities, including CNC machining and special-purpose equipment. The business has seen significant growth over the past decade, employing over 1,000 staff in the UK and working with some of the world s leading automotive brands. With strong investment in training, continuous improvement, and long-term contracts, this is an exciting time to join a forward-thinking engineering environment. The Role Maintenance Engineer As a Maintenance Engineer, you will be responsible for ensuring site reliability and supporting high-volume manufacturing through a mix of planned, preventative, and reactive maintenance. Key Responsibilities: Maintain CNC machines, robotics (KUKA & ABB), conveyors, and special-purpose equipment. Electrical fault finding on 3-phase motors, sensors, relays, and drives. Mechanical work including pneumatics, hydraulics, spindles, ball screws, and tool changers. Work with Siemens S7 PLCs at I/O level (training available). Support continuous improvement and quality initiatives. Record and plan maintenance activities using IT systems. About You Essentials: Time-served Apprenticeship or Level 3 Qualification (Electrical or Mechanical). Previous experience in a manufacturing or production environment. Strong electrical fault-finding ability. Mechanical knowledge including pneumatics and hydraulics. Ability to carry out component replacement. Desirable: CNC maintenance background. Exposure to robotics (KUKA or ABB). Automotive sector experience. Multi-skilled across both mechanical & electrical. The Benefits As a Maintenance Engineer, you can expect: £50,000 (Nights) + overtime Overtime rates: 1.33 (first 2 hours), 1.5 (Saturday), 2.0 (Sunday) 27 days holiday + bank holidays 3% employee / 6% employer pension contribution Life Assurance x2 PLC, CNC, robotics + HNC progression Career growth opportunities into specialist or leadership roles Long-term stability with a global manufacturer ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation
Oct 02, 2025
Full time
Maintenance Engineer Location: Wednesbury Salary: £50,000 (Nights) + Overtime Shifts: Double Days OR Nights Holidays: 27 Days + Bank Holidays Training: PLC, CNC, FLT & HNC Progression The Company A global manufacturer with multiple UK sites is looking for experienced Maintenance Engineers to join their growing team. Supplying directly into the automotive sector, they are recognised for their cutting-edge automation and robotics facilities, including CNC machining and special-purpose equipment. The business has seen significant growth over the past decade, employing over 1,000 staff in the UK and working with some of the world s leading automotive brands. With strong investment in training, continuous improvement, and long-term contracts, this is an exciting time to join a forward-thinking engineering environment. The Role Maintenance Engineer As a Maintenance Engineer, you will be responsible for ensuring site reliability and supporting high-volume manufacturing through a mix of planned, preventative, and reactive maintenance. Key Responsibilities: Maintain CNC machines, robotics (KUKA & ABB), conveyors, and special-purpose equipment. Electrical fault finding on 3-phase motors, sensors, relays, and drives. Mechanical work including pneumatics, hydraulics, spindles, ball screws, and tool changers. Work with Siemens S7 PLCs at I/O level (training available). Support continuous improvement and quality initiatives. Record and plan maintenance activities using IT systems. About You Essentials: Time-served Apprenticeship or Level 3 Qualification (Electrical or Mechanical). Previous experience in a manufacturing or production environment. Strong electrical fault-finding ability. Mechanical knowledge including pneumatics and hydraulics. Ability to carry out component replacement. Desirable: CNC maintenance background. Exposure to robotics (KUKA or ABB). Automotive sector experience. Multi-skilled across both mechanical & electrical. The Benefits As a Maintenance Engineer, you can expect: £50,000 (Nights) + overtime Overtime rates: 1.33 (first 2 hours), 1.5 (Saturday), 2.0 (Sunday) 27 days holiday + bank holidays 3% employee / 6% employer pension contribution Life Assurance x2 PLC, CNC, robotics + HNC progression Career growth opportunities into specialist or leadership roles Long-term stability with a global manufacturer ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation
Ernest Gordon Recruitment Limited
Wigan, Lancashire
Commissioning Engineer / Fitter (Specialist Machines) £50,000 - £55,000 + Day Shift Only - 39 hours + Overtime + Early Finish Friday + 25 days holiday + Pension + Excellent Progression Opportunities Atherton, Manchester Are you an experienced engineer with experience in commissioning, installation, and repair of large-capacity machines, looking to work for a historic and successful engineering company supplying to the Oil & Gas and Renewables sectors?Are you from a machine commissioning background and would like to work for a company where you can progress to senior management without all the travel?Do you have experience with installing, repairing, or overhauling large-format, industrial-scale CNC machinery?On offer is a role with a company established for over 100 years, offering heavy-engineered components up to 13m in length and 35 tonnes in weight, for the mining, oil & gas, and power generation industries. The company also offers overtime, progression, and development opportunities.The company offers excellent machining and in-house facilities, and you will be working with highly skilled and experienced colleagues. The role: Commission, install, and service a range of large machinery Strip down tools and machines for maintenance and repair Clean, oil, and prepare parts for reassembly Rebuild and fit tools/machines back to operational condition Safely handle and move heavy components (some exceeding 80kg) - crane experience is a plus, but not essential Familiarity with large-format CNC machines The Person: Background in commission, tool fitting, mechanical engineering, or toolmaking Comfortable working in a hands-on capacity If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV.BBBH21571The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Oct 01, 2025
Full time
Commissioning Engineer / Fitter (Specialist Machines) £50,000 - £55,000 + Day Shift Only - 39 hours + Overtime + Early Finish Friday + 25 days holiday + Pension + Excellent Progression Opportunities Atherton, Manchester Are you an experienced engineer with experience in commissioning, installation, and repair of large-capacity machines, looking to work for a historic and successful engineering company supplying to the Oil & Gas and Renewables sectors?Are you from a machine commissioning background and would like to work for a company where you can progress to senior management without all the travel?Do you have experience with installing, repairing, or overhauling large-format, industrial-scale CNC machinery?On offer is a role with a company established for over 100 years, offering heavy-engineered components up to 13m in length and 35 tonnes in weight, for the mining, oil & gas, and power generation industries. The company also offers overtime, progression, and development opportunities.The company offers excellent machining and in-house facilities, and you will be working with highly skilled and experienced colleagues. The role: Commission, install, and service a range of large machinery Strip down tools and machines for maintenance and repair Clean, oil, and prepare parts for reassembly Rebuild and fit tools/machines back to operational condition Safely handle and move heavy components (some exceeding 80kg) - crane experience is a plus, but not essential Familiarity with large-format CNC machines The Person: Background in commission, tool fitting, mechanical engineering, or toolmaking Comfortable working in a hands-on capacity If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV.BBBH21571The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
CNC Programmer / Setter required for a manufacturer based in Wood Green. This company is over a 100 years old with around 25 employees. CNC machinery includes Haas Machinery, XYZ Milling machinery, CNC Lathes, etc. You will be setting and operating this machinery (Fanuc) CNC Machinist Position Overview Programming machinery (Fanuc) Setting and operating CNC machinery Adhering to health & safety Operating a variety of machinery including Haas, XYZ, etc. CNC Machinist Position Requirements Previous experience programming CNC machinery Strong engineering pedigree Strong general machining skills Experience with G-Code CNC Machinist Position Remuneration Wage dependent on experience 17p/h- 21p/h 07:30-16:30 Monday-Thursday 07:30-15:30 Fridays Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Oct 01, 2025
Full time
CNC Programmer / Setter required for a manufacturer based in Wood Green. This company is over a 100 years old with around 25 employees. CNC machinery includes Haas Machinery, XYZ Milling machinery, CNC Lathes, etc. You will be setting and operating this machinery (Fanuc) CNC Machinist Position Overview Programming machinery (Fanuc) Setting and operating CNC machinery Adhering to health & safety Operating a variety of machinery including Haas, XYZ, etc. CNC Machinist Position Requirements Previous experience programming CNC machinery Strong engineering pedigree Strong general machining skills Experience with G-Code CNC Machinist Position Remuneration Wage dependent on experience 17p/h- 21p/h 07:30-16:30 Monday-Thursday 07:30-15:30 Fridays Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
CNC Setter Operator Location Bristol Salary 15.50 - 17.00 per hour Permanent full time Monday to Friday 37 hours per week Benefits 25 Days Annual Leave + Bank Holidays Company Pension Scheme (salary sacrifice available) Health Care Cash Plan DIS Benefit Employee Referral programme Enhanced Family Friendly Benefits Job description The company is a family-owned engineering company that has been machining high specification metallic components for the aerospace industry since 1938. Our investment in industry leading machine tools is complemented by our knowledge, expertise and attention to detail. Our continuous development within the organisation and specialist team lets us continue to compete in a rapidly evolving industry that has an exciting future ahead. Our team is growing! We now have a vacancy for a full time, permanent CNC Turner Setter Operator and a vacancy for a full time, permanent CNC Miller Setter Operator at our Bristol facility Role: Responsible for the setup and operation of CNC machines. Your expertise in machine setup, and precision machining will ensure the production of high-quality parts that meet strict industry specifications. You will work closely with engineers, and other manufacturing personnel to achieve efficient and accurate machining operations. Responsibilities: For the Turning role, setting and operating CNC lathes using Fanuc controls. For the Milling role, setting and operating 3/4/5 axis CNC milling machines using Heidenhain controls Producing high complexity components from a range of materials Adhering to quality standards Involvement and attendance at SQDCP meetings in assigned area/s Ensuring performance of part production to planned set and run times and Quality requirements Communicating Not Right first time (NRFT) within assigned areas Recording and assisting the Manufacturing Group Leader in improving the 5S organisation of the assigned Team areas and personal responsibility of machines being operated Responsible for attending and participating in progress meetings as required Responsible for ensuring correct materials, Route Cards, drawing are used to produce components Setting up tools, offsets etc ready for your own operation to commence and assist Operators where appropriate Ensuring Delivery Schedule Adherence of parts to system / route card dates Responsible for ensuring work is completed on time in full to process routing / system date requirements Flexibility to work at our other Group site in Bristol if required Skills & Experience. Setting and operating CNC lathes using Fanuc controls and / or Setting and operating 3/4/5 axis CNC milling machines using Heidenhain controls Producing high complexity components from a range of materials Adhering to quality standards Good working knowledge of manufacturing techniques and Engineering drawings Previous aerospace experience (Desirable) Good working knowledge of component dimensions using various inspection equipment - including but not limited to Micrometers, Verniers and Plug Gauges. Ability to produce components to drawing tolerance and specifications, efficiently and accurately as required by internal and external customer specification Hours of Work, 37 hours per week - Monday to Friday, early finish on Friday Mon -Thu 07:30 a.m. - 16:00 pm. Fri 07:30 a.m. - 12:30 p.m. DBS check will be required Please apply with your CV in the first instance. Wright Staff are acting as an employment business in relation to this vacancy.
Sep 26, 2025
Full time
CNC Setter Operator Location Bristol Salary 15.50 - 17.00 per hour Permanent full time Monday to Friday 37 hours per week Benefits 25 Days Annual Leave + Bank Holidays Company Pension Scheme (salary sacrifice available) Health Care Cash Plan DIS Benefit Employee Referral programme Enhanced Family Friendly Benefits Job description The company is a family-owned engineering company that has been machining high specification metallic components for the aerospace industry since 1938. Our investment in industry leading machine tools is complemented by our knowledge, expertise and attention to detail. Our continuous development within the organisation and specialist team lets us continue to compete in a rapidly evolving industry that has an exciting future ahead. Our team is growing! We now have a vacancy for a full time, permanent CNC Turner Setter Operator and a vacancy for a full time, permanent CNC Miller Setter Operator at our Bristol facility Role: Responsible for the setup and operation of CNC machines. Your expertise in machine setup, and precision machining will ensure the production of high-quality parts that meet strict industry specifications. You will work closely with engineers, and other manufacturing personnel to achieve efficient and accurate machining operations. Responsibilities: For the Turning role, setting and operating CNC lathes using Fanuc controls. For the Milling role, setting and operating 3/4/5 axis CNC milling machines using Heidenhain controls Producing high complexity components from a range of materials Adhering to quality standards Involvement and attendance at SQDCP meetings in assigned area/s Ensuring performance of part production to planned set and run times and Quality requirements Communicating Not Right first time (NRFT) within assigned areas Recording and assisting the Manufacturing Group Leader in improving the 5S organisation of the assigned Team areas and personal responsibility of machines being operated Responsible for attending and participating in progress meetings as required Responsible for ensuring correct materials, Route Cards, drawing are used to produce components Setting up tools, offsets etc ready for your own operation to commence and assist Operators where appropriate Ensuring Delivery Schedule Adherence of parts to system / route card dates Responsible for ensuring work is completed on time in full to process routing / system date requirements Flexibility to work at our other Group site in Bristol if required Skills & Experience. Setting and operating CNC lathes using Fanuc controls and / or Setting and operating 3/4/5 axis CNC milling machines using Heidenhain controls Producing high complexity components from a range of materials Adhering to quality standards Good working knowledge of manufacturing techniques and Engineering drawings Previous aerospace experience (Desirable) Good working knowledge of component dimensions using various inspection equipment - including but not limited to Micrometers, Verniers and Plug Gauges. Ability to produce components to drawing tolerance and specifications, efficiently and accurately as required by internal and external customer specification Hours of Work, 37 hours per week - Monday to Friday, early finish on Friday Mon -Thu 07:30 a.m. - 16:00 pm. Fri 07:30 a.m. - 12:30 p.m. DBS check will be required Please apply with your CV in the first instance. Wright Staff are acting as an employment business in relation to this vacancy.
Milton Keynes Salary-Negotiable DOE Monday-Friday Days Your new company: Based near Milton Keynes, we are working with a leading company in the design, development, and manufacture of innovative construction equipment. Due to increased business and growth, they are now recruiting for a CNC Turner with ideally, ideally, Programming, Setting and Operating experience to join and be part of their manufacturing workshop team. The CNC Turner will be programming, setting, and operating CNC lathes. You will work with Fanuc-controlled machines, programming directly at the machine. Key Responsibilities & Duties: Programme, set, and operate turning centres with live tooling, Set and Operate CNC lathes using Fanuc control system. Operate 5 Axis CNC machining centre with 8 Pallet AWC. Select appropriate tools and machine settings. Set and operate manual milling, turning, and grinding machines-Training will be provided This is a summed-up list, and other responsibilities and duties will be required. Skills & Experience required: Relevant experience programming, setting and operating CNC lathes with Fanuc controls. Ability to programme, set, and operate CNC lathe machines, including set up of tooling. Ability to read and interpret manufacturing drawings. Understanding of engineering tolerances. Quality inspection/control experience What you need to do now If you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us now on (phone number removed) for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Sep 23, 2025
Full time
Milton Keynes Salary-Negotiable DOE Monday-Friday Days Your new company: Based near Milton Keynes, we are working with a leading company in the design, development, and manufacture of innovative construction equipment. Due to increased business and growth, they are now recruiting for a CNC Turner with ideally, ideally, Programming, Setting and Operating experience to join and be part of their manufacturing workshop team. The CNC Turner will be programming, setting, and operating CNC lathes. You will work with Fanuc-controlled machines, programming directly at the machine. Key Responsibilities & Duties: Programme, set, and operate turning centres with live tooling, Set and Operate CNC lathes using Fanuc control system. Operate 5 Axis CNC machining centre with 8 Pallet AWC. Select appropriate tools and machine settings. Set and operate manual milling, turning, and grinding machines-Training will be provided This is a summed-up list, and other responsibilities and duties will be required. Skills & Experience required: Relevant experience programming, setting and operating CNC lathes with Fanuc controls. Ability to programme, set, and operate CNC lathe machines, including set up of tooling. Ability to read and interpret manufacturing drawings. Understanding of engineering tolerances. Quality inspection/control experience What you need to do now If you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us now on (phone number removed) for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
