727 jobs found

400kV SAP needed for a Major Offshore Wind project in the United Kingdom. Responsibilities: Implement and ensure compliance with Electrical Safety Rules on site. Act as Senior Authorised Person for HV/MV/LV systems. Plan, manage, prepare, and execute electrical works offshore. Provide operational advice on high-voltage installations including WTG, offshore substations, and HV cables. Oversee safe commissioning of grid connections, substations, and associated MV/HV/LV equipment. Ensure safety, security, and integrity of the HV network. Coordinate MV/HV/LV commissioning activities during all construction phases. Take operational responsibility for an entire offshore substation. Manage outage planning and network control in collaboration with Control Engineers. Prepare, review, and check high-voltage switching schedules. Update MV/HV/LV schematic diagrams and ensure documentation accuracy. Conduct site inspections, safety audits, and worksite assessments for electrical matters. Coordinate with project management to communicate accurate progress updates. Manage and coordinate HV/MV/LV commissioning activities across the project. Liaise with external grid operators and participate in commissioning panel meetings. Review method statements relating to electrical tasks. Deliver technical advice and engineering support to working parties. Participate in FAT and SAT testing and provide related reports. Contribute to commissioning manuals, quality plans, and technical documents. Plan resources, work activities, and switching programs. Lead toolbox talks and safety briefings. Perform pre- and post-energization checks across the wind farm. Establish grounding, isolation zones, and worksite demarcation. Act as a Training Mentor and support staff authorizations and assessments. Carry out project-related administrative tasks. Use Microsoft Office (Excel, Word, Outlook) for reporting and communication. Participate in both offshore and onshore work rotations if required. Be available for on-call responsibilities during certain work tasks. Work in adverse conditions or emergency scenarios when required. Requirements: Appropriate electrical qualification relevant to HV authorization (SAP level). Several years of experience in high-voltage operations and commissioning (400 kV). Offshore experience preferred. Minimum 3 years' experience working with onshore substation systems. Strong understanding of MV/HV/LV systems, switching, and commissioning. Up-to-date GWO and HUET with CA-EBS (as required by site). Able to meet offshore climbing gear weight limits (maximum 120 kg / 264 lb). Able to work a 14/14 offshore rotation. Capable of working in adverse weather and emergency environments. Must provide own iPhone compatible with required security software. Must allow installation of mandatory security management applications on any personal mobile device used for work. Must bring personal work clothing and offshore safety boots (additional PPE provided onsite).

Job Title: Approved Electrician / NICEIC Qualified Supervisor Location: Aberdeen OTE: £50-60k About Us Quartzelec is a leading UK independent electrical engineering group, providing design, installation, maintenance, and service solutions across industrial and commercial sectors. The Role We're looking for an Approved Electrician / NICEIC Qualified Supervisor to join our team, supporting high-quality electrical services and project delivery across Scotland and the UK. Reporting to the Contracts Manager, you'll work independently and mentor apprentices. Responsibilities Install, maintain, inspect, and test electrical systems from drawings and scopes of work Ensure compliance with BS 7671 Support and mentor apprentices Participate in on-call rota and overtime as required Requirements SJIB Approved Electrician with minimum 5 years' experience 18th Edition Wiring Regulations & C&G 2391 (or equivalent) Strong knowledge of BS 7671:2018 & Guidance Note 3 Full UK driving licence Ability to work independently and in a team NICEIC Qualified Supervisor experience (desirable) What We Offer Career development & training opportunities Company vehicle + fuel card, PPE, power tools, and test equipment Enhanced pension, benefits, gym subsidy, sick pay & EAP Supportive team environment with opportunities to progress We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. Strictly no agencies please. Job Type: Full-time Licence/Certification: JIB/SJIB Approved (required) Work authorisation: United Kingdom (required) Location: Aberdeen AB21 0GL (required) Work Location: In person

Senior Design Engineer (DE353) When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. The Original British Motorcycling Company. At Triumph, we are driven to make the best motorcycles in the world. Building iconic motorcycles that celebrate our past whilst embracing the future - through bold design, original styling, purposeful engineering and a genuine passion for the ride. Senior Design Engineer Value Engineering. The successful candidate will be responsible for enhancing value across a range of components and processes within all Triumph model platforms. Key techniques will involve design optimisation, re-sourcing, and supplier negotiations. This role presents an exciting opportunity to collaborate with colleagues across the business to identify and implement Value Engineering initiatives in Powertrain, Chassis, and Electrical components. Company Benefits: Annual Leave 25 days plus bank holidays. Additional Annual Leave Pension Scheme Life Assurance Scheme - currently 6 x pensionable salary. Preferential rates for medical insurance with a third-party provider. Employee Motorcycle Purchase Scheme - on successful completion of the probation period (minimum of 6 months), we offer employees and their close family the opportunity to purchase a brand new Triumph Motorcycle with up to 25% discount. Employee Motorcycle Lease Scheme Discounted Clothing, Parts and Accessories Purchases Company benefits platform, allowing discounts with multiple vendors. Flexible working Duties and Responsibilities: Responsible for the delivery of engineering solutions to support the continuous improvement in the value of current production and development motorcycles, consulting with and seeking support from Specialists and Chief Engineers as required. Responsible for delivering these projects to the business defined time, cost, quality, and specification requirements, consistent with the high regard that Triumph places on the customer ownership experience. To regularly work as part of a cross functional team to identify and define opportunities, followed up with timely and robust engineering solutions. Engage technically with international suppliers as required to develop and agree component specifications. The role is a highly technical role, focussed on detail and delivery. It will include taking responsibility for technically demanding tasks within the team. Full details of the job description and person specification can be found in the downloadable job files. Disclaimer: due to the high volume of applications we receive, we reserve the right to close a vacancy earlier than the advertised date. This is to ensure our teams can manage application levels while maintaining a positive candidate experience. Once a vacancy has closed, we are unable to consider further applications, so please submit your application as soon as possible to avoid disappointment.

Job Title: Principal HVAC Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of cutting-edge HVAC systems, ensuring they meet demanding performance, safety, and environmental standards Create and review high-impact engineering artefacts - from specifications and P&IDs to calculations and 3D models Drive advanced thermal, airflow, and pressure analyses toto validate system performance in challenging conditions Transform complex requirements into robust, innovative, and verifiable design solutions that set the benchmark for excellence Guide and influence engineers, suppliers, and design partners, shaping best-in-class HVAC integration across the platform Enhance design standards and evaluate specialist equipment, contributing to reviews, hazard assessments, and lifecycle verification Your skills and experiences: Strong technical expertise in HVAC and mechanical system design, including psychometrics, thermal analysis , equipment specification, schematics and system balancing Proven experience working in complex or regulated industries, with knowledge of standards such as ISO 15138, BS EN 378, ASHRAE, or CIBSE Skilled in system performance assessment, design validation, modelling, and failure analysis Awareness of multi-disciplinary system integration challenges across structures, electrical, controls , safety, and installation Excellent technical communication and reporting abilities, engaging both internal and external stakeholders STEM degree (or equivalent experience), ideally working toward or holding professional registration (CEng preferred) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Mechanical Integrated Delivery Team: As a Principal HVAC Design Engineer, you'll be at the forefront of one of the UK's most advanced engineering programmes - leading the delivery of complex HVAC systems that shape the future of submarine platforms. You'll take ownership of high-impact systems, provide trusted technical authority, and work across multiple disciplines to drive innovative solutions into reality. You'll be part of the Platform Mechanical Integrated Delivery Team - a fast-moving, highly collaborative group of specialists pushing the boundaries of submarine engineering. This is a unique opportunity to work alongside experts from diverse backgrounds and partner organisations, contributing to mechanical capabilities that are critical to the success of the entire platform We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 18th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Senior/Principal Electrical Engineer Building Services Design Liverpool city centre Salary up to & around £70,000 DOE Looking to work for one of the Best M&E Engineering Consultancies in the Northwest? Want to work for a company who values their employees career progression and development? If you re looking for a business that values their employees by giving them a say in how the business is run, this is the position for you! About the company: This building services design consultancy is looking for a Senior / Principal Electrical Engineer to join their team in Liverpool, but would also consider candidates at slightly lower levels who are keen to progress and aren t far from considering themselves to be senior. Their foundations are based on strong technical and practical skills developed over many years of providing Mechanical, Electrical, Public Health and Vertical Transportation advice to Construction, Facilities and Property professionals across all sectors of the Built Environment. Some of their big projects include the Newton Building ICZ Extension for the University of Salford and Hanover House in Manchester. They are constantly keeping their technology and concepts up to date to ensure every project meets Low Carbon Legislation requirements and have won Best M&E Engineering Consultancy at the Grafters Awards for three years in a row. They re an employee-owned business who give more control to their employees on how they also see the business should be run. With this comes the added incentive of bonuses and extra benefits when the business is performing well. They have a total of three offices, Manchester, Leeds, and Liverpool, the last of which is home to 16 engineers who will soon be relocating into a bigger and more open planned building to help facilitate the growth of the office and their expansion plans. They employ engineers at all levels and aim to support their career progression and development. For this role, the consultancy is considering applications from Electrical Engineers wanting to become Senior or from already existing Senior Engineers. If you want to be part of a growing business, a place where you can enjoy your work and grow as a professional, this is the role for you! What s in it for you? Opportunity to progress into more Senior Management role in the office Employee-owned company with plenty of benefits including tax free bonus up to £3600. Good starting pension contribution that increases over time 25 days annual leave rising with service + birthday off The chance to work on a huge range of different projects across the country within a plethora of sectors Easy to get to, central Liverpool location Great team structure and working environment with different personalities and abilities across the business. How to apply? Jevon Astley-Jones is the consultant dealing with this Senior/Principal Electrical Engineer vacancy. Please apply via the link provided or call ahead on the number provided on our website for a more preferential application.

Job Title: Principal HVAC Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of cutting-edge HVAC systems, ensuring they meet demanding performance, safety, and environmental standards Create and review high-impact engineering artefacts - from specifications and P&IDs to calculations and 3D models Drive advanced thermal, airflow, and pressure analyses toto validate system performance in challenging conditions Transform complex requirements into robust, innovative, and verifiable design solutions that set the benchmark for excellence Guide and influence engineers, suppliers, and design partners, shaping best-in-class HVAC integration across the platform Enhance design standards and evaluate specialist equipment, contributing to reviews, hazard assessments, and lifecycle verification Your skills and experiences: Strong technical expertise in HVAC and mechanical system design, including psychometrics, thermal analysis , equipment specification, schematics and system balancing Proven experience working in complex or regulated industries, with knowledge of standards such as ISO 15138, BS EN 378, ASHRAE, or CIBSE Skilled in system performance assessment, design validation, modelling, and failure analysis Awareness of multi-disciplinary system integration challenges across structures, electrical, controls , safety, and installation Excellent technical communication and reporting abilities, engaging both internal and external stakeholders STEM degree (or equivalent experience), ideally working toward or holding professional registration (CEng preferred) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Mechanical Integrated Delivery Team: As a Principal HVAC Design Engineer, you'll be at the forefront of one of the UK's most advanced engineering programmes - leading the delivery of complex HVAC systems that shape the future of submarine platforms. You'll take ownership of high-impact systems, provide trusted technical authority, and work across multiple disciplines to drive innovative solutions into reality. You'll be part of the Platform Mechanical Integrated Delivery Team - a fast-moving, highly collaborative group of specialists pushing the boundaries of submarine engineering. This is a unique opportunity to work alongside experts from diverse backgrounds and partner organisations, contributing to mechanical capabilities that are critical to the success of the entire platform We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 18th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Gas Repair Engineer Ganymede Energy is recruiting for a leading private provider of heating and maintenance services for residential properties across the UK. They are the second-largest home care maintenance company in the country, following British Gas. With a strong presence and continuous growth, who currently employs over 350 engineers. Established in 1992, the company brings decades of industry experience and offers excellent training facilities nationwide. Their training programs are comprehensive, safety-focused, and tailored to support individual employee development and career progression. You ll be part of a fun, friendly, and inclusive work environment where everyone s contribution is valued. Employees are encouraged to recognise and celebrate success. The company fosters an open and engaged culture, giving everyone a voice and the chance to make a meaningful impact on both the business and customers lives. The Role: The role involves working in private residential properties to identify and diagnose faults in central heating systems, followed by carrying out necessary boiler repairs. The ideal engineer will have strong experience in boiler breakdowns, with excellent diagnostic and fault-finding skills, and a high first-time fix rate. A solid understanding of basic electrical systems is essential, along with confidence in using a multi-meter to identify boiler faults. The Package: Basic salary: £44,900 + a £1,500 guaranteed bonus in your first year! 40 hours per week, with annualised hours (less in summer, more in winter consistent pay all year round!) Overtime & On Call available 33 days holiday (including BHs) with the option to buy, sell or carry over up to a week Sick Pay & Maternity/Paternity Pay Company van, fuel card, tools, uniform & PPE provided Fantastic pension with income protection cover Access to a private, award-winning training centre & field coaches to support your growth Up to £2,500 Smart Tech & Home Improvement salary sacrifice scheme (IKEA, Currys) A supportive team where you ll be recognised and rewarded Clear progression opportunities About You: CCN1, CENWAT1, HTR1 & CKR1 Full UK Driving Licence with no more than 6 penalty points Excellent customer service Proactive, 'can do' attitude Keen eye for detail and problem-solving skills If you are interested in joining a growing business at an exciting time, you can apply directly below or send your CV to (url removed) or call me on (phone number removed) for a full job description. INDENE Ganymede is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Mechanical Fitter - Full-Time (Day Shift) Location: Gloucestershire, GL4 Pay: 30-40 k depending on experience Type: Full-time Day shift Overtime available About the Role We are seeking a skilled Mechanical Fitter to join our dedicated engineering team specialising in the design and manufacture of advanced refuelling systems for aviation, military, and marine applications. Working on a day shift, you will assemble, fit, and test mechanical, hydraulic, pneumatic, and electrical components to produce high-quality, precision-engineered products used worldwide. Key Responsibilities Assemble sub-assemblies and final builds in accordance with detailed engineering drawings and specifications. Work across mechanical, electrical, pneumatic, and hydraulic systems. Build fabricated assemblies from scratch, including marking out, cutting, folding, pipe bending, and weld preparation. Inspect assemblies for accuracy, alignment, and overall quality. Maintain a safe and efficient work environment, following all Health & Safety procedures. Skills & Experience Strong mechanical or engineering background. Ability to read and work from manufacturing and assembly drawings. Skilled in the use of hand and power tools for fabrication and assembly. Working knowledge of pneumatic, hydraulic, and basic electrical systems. Excellent attention to detail, problem-solving, and teamwork skills. Desirable: o Experience in vehicle fabrication or fitting. o Background in aviation, military, or marine industries. o Ability to interpret electrical circuit drawings (advantageous but not essential). Additional Information Day shift position with regular overtime available. Applicants must have the right to work in the UK (no sponsorship available). Previous applicants need not apply. Skilled engineers in this role typically earn over ?30,000 per year (excluding overtime). MAN24

Job Title: Principal HVAC Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of cutting-edge HVAC systems, ensuring they meet demanding performance, safety, and environmental standards Create and review high-impact engineering artefacts - from specifications and P&IDs to calculations and 3D models Drive advanced thermal, airflow, and pressure analyses toto validate system performance in challenging conditions Transform complex requirements into robust, innovative, and verifiable design solutions that set the benchmark for excellence Guide and influence engineers, suppliers, and design partners, shaping best-in-class HVAC integration across the platform Enhance design standards and evaluate specialist equipment, contributing to reviews, hazard assessments, and lifecycle verification Your skills and experiences: Strong technical expertise in HVAC and mechanical system design, including psychometrics, thermal analysis , equipment specification, schematics and system balancing Proven experience working in complex or regulated industries, with knowledge of standards such as ISO 15138, BS EN 378, ASHRAE, or CIBSE Skilled in system performance assessment, design validation, modelling, and failure analysis Awareness of multi-disciplinary system integration challenges across structures, electrical, controls , safety, and installation Excellent technical communication and reporting abilities, engaging both internal and external stakeholders STEM degree (or equivalent experience), ideally working toward or holding professional registration (CEng preferred) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Mechanical Integrated Delivery Team: As a Principal HVAC Design Engineer, you'll be at the forefront of one of the UK's most advanced engineering programmes - leading the delivery of complex HVAC systems that shape the future of submarine platforms. You'll take ownership of high-impact systems, provide trusted technical authority, and work across multiple disciplines to drive innovative solutions into reality. You'll be part of the Platform Mechanical Integrated Delivery Team - a fast-moving, highly collaborative group of specialists pushing the boundaries of submarine engineering. This is a unique opportunity to work alongside experts from diverse backgrounds and partner organisations, contributing to mechanical capabilities that are critical to the success of the entire platform We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 18th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal HVAC Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of cutting-edge HVAC systems, ensuring they meet demanding performance, safety, and environmental standards Create and review high-impact engineering artefacts - from specifications and P&IDs to calculations and 3D models Drive advanced thermal, airflow, and pressure analyses toto validate system performance in challenging conditions Transform complex requirements into robust, innovative, and verifiable design solutions that set the benchmark for excellence Guide and influence engineers, suppliers, and design partners, shaping best-in-class HVAC integration across the platform Enhance design standards and evaluate specialist equipment, contributing to reviews, hazard assessments, and lifecycle verification Your skills and experiences: Strong technical expertise in HVAC and mechanical system design, including psychometrics, thermal analysis , equipment specification, schematics and system balancing Proven experience working in complex or regulated industries, with knowledge of standards such as ISO 15138, BS EN 378, ASHRAE, or CIBSE Skilled in system performance assessment, design validation, modelling, and failure analysis Awareness of multi-disciplinary system integration challenges across structures, electrical, controls , safety, and installation Excellent technical communication and reporting abilities, engaging both internal and external stakeholders STEM degree (or equivalent experience), ideally working toward or holding professional registration (CEng preferred) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Mechanical Integrated Delivery Team: As a Principal HVAC Design Engineer, you'll be at the forefront of one of the UK's most advanced engineering programmes - leading the delivery of complex HVAC systems that shape the future of submarine platforms. You'll take ownership of high-impact systems, provide trusted technical authority, and work across multiple disciplines to drive innovative solutions into reality. You'll be part of the Platform Mechanical Integrated Delivery Team - a fast-moving, highly collaborative group of specialists pushing the boundaries of submarine engineering. This is a unique opportunity to work alongside experts from diverse backgrounds and partner organisations, contributing to mechanical capabilities that are critical to the success of the entire platform We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 18th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Engineer - Test Integration Location: Barrow-in-Furness. On-Site Salary: Up to £57,000 depending on experience What you'll be doing: Utilising technical information gathered from various stakeholders such as design teams to produce test documentation that will evaluate the rigour of the systems under test. Understanding and interpreting the customer needs for integration activities and affect these once agreed as deliverables Undertaking integration testing in line with approved test procedures and taking ownership and responsibility for assigned systems verification and validation activities Investigating complex technical faults and queries of the (to be) integrated systems based on a considerable understanding of the underlying technical design Being able to gain an ample understanding of the underlying technical design of the systems under test and act as a technical liaison between design and commissioning teams on test related topics Compiling and communicating test/fault/investigation evidence and reports in verbal, informal and formal written mediums Developing test strategies and procedures in collaboration with Systems design teams Contributing to the development of the Integration test capability through Process and Facilities workshops, project planning and coaching/mentoring other staff Your skills and experiences: Essential: Relevant qualification or engineering experience held (Degree/HNC/HND or equivalent) Ability to provide technical knowledge & instruction to emergent incidents Knowledge and understanding to provide technical guidance to Control Systems Knowledge and understanding of Electrical Testing and / or Software Testing Experience of Test and Acceptance within a high assurance engineering environment Desirable: Detailed knowledge of safety controls & procedures in an operational environment Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Test & Integration team: As a Principal Integration Test Engineer within the Test & Integration team, you will have the opportunity of developing and performing innovative integration testing, covering specialised systems of state-of-the-art electrical programmable equipment. You will also have a pivotal input to the development and creation of complex test procedures to govern critical de-risking activities. This team plays a critical role in testing the software of vital boat systems, writing test procedures and delivering measures to significant stages of the submarine build, and is a team that is expected to grow rapidly, allowing for development opportunities. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Control Systems Engineer Lathom 50,000- 55,000 + 25 Days Holiday + Bank Holidays + Bonus Scheme + Up to 8% Pension + Training & Development Excellent opportunity for a Control Systems Engineer with PLC and SCADA experience to join an industry leader offering the chance to work on cutting-edge technology, contribute to global projects, and develop your skills within a highly technical R&D environment. This company are a global powerhouse in their field, known for world-class manufacturing, pioneering technology, and a long-standing reputation for innovation. Their R&D Process Control team plays a vital role in developing and rolling out advanced inspection and process control systems across international operations, forming a key part of their digitalisation and automation strategy. In this role you will work across the full lifecycle of process control systems - from concept through to implementation. You'll develop SCADA systems, program PLCs, create and enhance advanced control techniques (including PID, AI, and machine learning approaches), and support instrumentation and inspection tools used across global manufacturing sites. You'll collaborate with cross-functional R&D and production teams to drive process improvements, troubleshoot complex challenges, and support both on-site and remote operations. Some occasional overseas travel may be required. The ideal candidate will have experience in industrial process control, be strong with PLC and SCADA systems, and have a solid understanding of electrical/electronic principles. Candidates must have full right to work in the UK, be commutable to Lathom, and have excellent communication skills, strong problem-solving abilities, and good project/time management capabilities. This is a fantastic opportunity to join a highly technical R&D team working with global stakeholders, advance your skills with new technologies, and contribute directly to the development of next-generation control and inspection systems. The Role: Developing and enhancing process control systems from concept to implementation PLC programming, SCADA development, and advanced control techniques (including AI/ML) Delivering instrumentation and inspection solutions to support global operations Providing technical support, system upgrades, and occasional overseas travel The Person: Experience in industrial process control and PLC/SCADA systems Engineering Degree (2:1 or above preferred) Logical problem solver with strong communication skills Commutable to Lathom and full right to work in the UK Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Tommy Williams at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.

An Electrical Sales Engineer is required to join an electrical equipment manufacturer. The company is a long-established family business manufacturing HV and LV power and distribution equipment for commercial and industrial applications, and they sell directly to licensed contractors. This role would suit either an electrical wholesale sales background or a technical sales engineer, ideally who is electrically qualified. Field sales experience selling to electrical contractors is highly beneficial. The role Remote position A mix of existing customers and developing new customers Building relationships with licensed electrical contractors in the Midlands region with a target circa £3m Collaborating with the technical and tendering teams Providing quotes and supply availability Support and training provided as required Requirements Currently living in the Midlands Technical sales experience Being electrically qualified is beneficial Has sold to electrical contractors is beneficial Knowledge of electrical products such as switchgear, motors, transformers, power supplies is beneficial Full driving licence Package Salary DOE upto £50K Bonus 20% of salary Car allowance £450pm 23 days holiday rising with service Laptop, phone

Job title: Inspection & Testing Engineer Job Type: Permanent Start date: Subject to clearance Salary: Competitive per annum + Benefits Location: Stone Hours of work: 37 Hours Per Week The Role: As part of the Inspection and Test Team you will be responsible to inspect and test equipment produced by client to ensure the safety and functional operation of the equipment. All testing and inspection is completed using the electrical schematic drawings for the project and a project specific Hardware Test Specification which is written by the Hardware Engineer responsible for the project. The Inspection and Test Specification identifies the inspections and tests to be performed to comply with the requirements of the Low Voltage Directive and Electromagnetic Compatibility Directive as a minimum, together with any other customer specific standards which the equipment has been designed to comply with. Main Responsibilities will include: Point to point wiring checks Equipment build and configuration inspection LVD electrical safety checks Earth bond continuity test High voltage withstand test Insulation resistance test Power up, fusing and equipment functionality checks PLC based automation control panels. IT cubicles which may contain computing and networking equipment Peripheral equipment including printers, scanners etc. Experience/Qualifications: You must be able to read and interpret circuit diagrams, general assembly prints, wiring schedules and parts lists You must be able to understand and implement test procedures and instructions You must be able to inspect and test cubicles in line with Company standards. You must be able to maintain/complete test documentation and reports You must have operational knowledge of components such as MCB's, RCD's, Fuses, Transformers, Power supply's and safety critical components You must be proficient in the use of electronic multi-meters and other test equipment You must have worked within an ISO 9001 compliant quality system You must be willing and have the ability to attend at customer sites to witness equipment tests You must hold a current driving licence All candidates must hold either a nationally recognised technical qualification in an Electrical/Electronic discipline, e.g HNC/HND, 17th or 18th Edition C&G2382 & Inspection & Test or completed a modern apprenticeship or similar. Please note for this role all candidates MUST be eligible to obtain SC Security Clearance. Interested in this position? please click "apply now" We try to respond to all applicants, but sometimes this is not possible due to high volumes of applications; if you have not heard from us within 14 days, regrettably it means you have been unsuccessful on this occasion. Company information: This is a Volunteer vacancy is being advertised by Rullion Ltd Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands, to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base; from small start-ups to large household names. We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.

Job Title: Principal HVAC Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of cutting-edge HVAC systems, ensuring they meet demanding performance, safety, and environmental standards Create and review high-impact engineering artefacts - from specifications and P&IDs to calculations and 3D models Drive advanced thermal, airflow, and pressure analyses toto validate system performance in challenging conditions Transform complex requirements into robust, innovative, and verifiable design solutions that set the benchmark for excellence Guide and influence engineers, suppliers, and design partners, shaping best-in-class HVAC integration across the platform Enhance design standards and evaluate specialist equipment, contributing to reviews, hazard assessments, and lifecycle verification Your skills and experiences: Strong technical expertise in HVAC and mechanical system design, including psychometrics, thermal analysis , equipment specification, schematics and system balancing Proven experience working in complex or regulated industries, with knowledge of standards such as ISO 15138, BS EN 378, ASHRAE, or CIBSE Skilled in system performance assessment, design validation, modelling, and failure analysis Awareness of multi-disciplinary system integration challenges across structures, electrical, controls , safety, and installation Excellent technical communication and reporting abilities, engaging both internal and external stakeholders STEM degree (or equivalent experience), ideally working toward or holding professional registration (CEng preferred) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Mechanical Integrated Delivery Team: As a Principal HVAC Design Engineer, you'll be at the forefront of one of the UK's most advanced engineering programmes - leading the delivery of complex HVAC systems that shape the future of submarine platforms. You'll take ownership of high-impact systems, provide trusted technical authority, and work across multiple disciplines to drive innovative solutions into reality. You'll be part of the Platform Mechanical Integrated Delivery Team - a fast-moving, highly collaborative group of specialists pushing the boundaries of submarine engineering. This is a unique opportunity to work alongside experts from diverse backgrounds and partner organisations, contributing to mechanical capabilities that are critical to the success of the entire platform We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 18th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Power System Design Lead Location: Isle of Wight - Cowes. We offer hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £85,700 commensurate with skills and experience. Part time & accruing hours available. Please let us know if you would like to discuss these options. Put yourself into a dynamic Power System Design Lead role at the forefront of real world demands in the defence industry. Alongside ensuring operational excellence for our existing products, there will be the opportunity to develop next generation radar products to counter emerging threats and contribution to our strategy for new technology. Your new day-to-day will be exciting and diverse by applying the principles of Systems Engineering across the entire engineering development lifecycle as you join in developing radar systems used by those who serve and protect us. What you'll be doing: Design of AC & DC power generation and distribution systems including sizing, protection, control, and the specification of power supplies and converters. This covers design and/or specification of an electrical supply system from 440V AC to circuit board voltage rails Motor drives, control, and positioning systems, EMC management and verification Specification of bespoke procured hardware and management of associated sub-contractor development programmes Design verification using a combination of simulation, analysis, and test techniques including support to EMC test houses and customer installations Generate design documentation and technical reports and provide Electrical Engineering expertise to the project team Adherence to Engineering Lifecycle and contributing to progress, peer, and design reviews Your Skills and Experiences Degree or equivalent in Electrical/Electronic Engineering or strongly related subject Comprehensive/expert knowledge in one or more of the following areas; Specification or design of electrical power systems including AC to DC conversion, distribution, regulation and conditioning including linear and switch-mode supplies Familiarity with Electrical Safety Standards, and ideally EMC qualification to DEF STAN 59-411 Familiarity with relevant modelling tools such as Matlab/Simulink would be beneficial as would some awareness of SysML Gathering of evidence to support acceptance, fitness for purpose, legislative requirements, and safety A rigorous approach to the safety aspects associated with high power/high voltage equipment Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The Power System Design Team: At BAE Systems we are revolutionising radar technology, delivering world-class products and the next-generation capability that keeps the UK at the forefront of defence innovation. As a growing business working on cutting-edge solutions, we value the importance of investment in talent-people like you-who are eager to push technological boundaries, make a real impact and translate this into world-class products. Our mission is clear: to equip our customers with the most advanced and capable systems available, through which we invest and build the UK's sovereign capability for Radar. With strong backing from those customers, who are not only in close proximity but also deeply integrated in our strategic vision, we operate in a highly collaborative environment where what we do really matters. Joining our team means being part of a dynamic, forward-thinking organisation that values career development, technical excellence, and real-world impact. We're on a growth journey, with that there are rich opportunities for you to develop, lead, and innovate way into the future. Join us and shape the future of Radar technology, we want to hear from you. We work in the business of careers not jobs - your future starts here. Our workplace in Cowes is an easily accessible commute from Southampton with a regular foot passenger ferry and BAE shuttle service from the ferry terminal to site. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 11th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Electrical Maintenance Engineer - Production / Process Plant Goole - Days Based Shift £45,000- £47,500 + Pension + Specialist Training + Holidays + Life Assurance + Salary Reviews Excellent opportunity for a maintenance engineer with an electrical bias to get into the rapidly growing renewable energy industry in a role that is technically interesting, varied and has the chance to progress further as you gain specialist skills. With a number of sites across the UK, this company is one of the market leaders in producing renewable energy through energy from waste and are looking to grow their team in the area to continue building upon their success. This company is one of the largest operators of Anaerobic Digestion plants across the UK and over recent years have been growing significantly after their success in the sector. They are now looking for a motivated Commercial Manager to join their expanding team. In this role the Maintenance Engineer will be carrying out planned and reactive maintenance in addition to general servicing duties at one of the sites owned by the company. The person will receive training to familiarise themselves with the specific processes, equipment and systems used by the company. The ideal candidate will have a relevant electrical qualification or will be time served, and will be happy with working additional hours through an on-call rota system. Experience specifically within a process, wastewater or energy-from-waste plant will be highly advantageous. This is the perfect opportunity to progress within a promising industry as part of a close team of workers inside of a successful and secure company. The Role: Carry out PPM tasks and using a maintenance system to log rectifications Adopting a proactive approach to improving the quality and efficiency of machinery Responding to breakdowns in a timely and effective manner Additional involvement in new installations and fabrications where needed Recording and reporting incidents to help prevent repeat breakdowns The Person: Electrical qualification or time served as a Maintenance Engineer Ability to use maintenance management systems and interpret engineering drawings Comfortable with working at heights Happy with additional work through an on-call rota and responding to time-critical breakdowns Full UK driving license Experience within a process, wastewater or energy-from-waste plant (desirable) Knowledge of steam, pneumatic or water treatment systems (desirable) To apply for this role or to be considered for further roles, please click 'Apply Now' or contact Troy Earl at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. JBRP1_UKTJ

Maintenance Engineer 4on4off Days and Nights up to 54,000 A new and exciting opportunity has arisen for a Maintenance Engineer to join an excellent food manufacturer in the Somerset area. With no day ever being the same the Maintenance Engineer role offers genuine long-term progression and career development within a first-class manufacturing environment. Role & Responsibilities: Carry out PPMs Dealing with all Breakdowns on site, keeping downtime to a minimum Fault Finding on all Machinery to identify issues Knowledge of PLC control systems Adhere to a high level of H&S and instigate a positive culture Look at continuous improvement and have a direct influence on processes Be a strong team player within a team Worked with and installed single phase / three phase electrical motors Be flexible with working hours Knowledge and understanding of 5s and Lean Manufacturing Knowledge, Skills & Experience: Time served in Electrical Engineering/ Electromechanical Engineering 2 years' experience minimum Ideally Apprentice Trained Strong Communication Skills Multi skilled Engineering experience Qualified in IEE Regulations (18th edition) Strong IT Skills Package and Benefits: 48,000 - 54,000 Employer Pension Scheme 25 days Holiday Exceptional long term career progression opportunities How to apply: Suitable candidates for the Maintenance Engineer role should apply immediately using the 'Apply Now' button by calling Olly on (phone number removed) or by sending your CV directly to (url removed) We regret that this client is not prepared to sponsor work permit or work permit transfer applications. Candidates must be able to prove their eligibility to work in the UK. Hunter Selection is an employment consultancy and currently has permanent vacancies for Engineering and Manufacturing professionals throughout the UK. If you are looking for work in this area we may be able to assist you. Contact us directly on (phone number removed) and discuss your requirements with one of our dedicated consultants. If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

60 000 + benefits Welshpool (hybrid available) Take ownership of a market-leading product range and shape its future direction in a business that's expanding fast. You'll manage the full product lifecycle from specification and development through to launch and commercial delivery. This is a key position combining technical depth with commercial strategy, working across engineering, sales, and marketing teams to drive innovation and growth. What you'll do: Manage the technical and commercial aspects of a defined product range. Produce detailed product specifications and liaise with customers to align requirements. Oversee projects through design, validation, and production. Present features, benefits, and business cases to both technical and commercial audiences. Support long-term product planning to meet future market needs. What you'll need: Engineering qualification (Electrical, Electronic, or similar). Minimum 10 years of experience in the Variable Speed Drives (VSD) or Motion Control industry. Strong customer-facing and communication skills. Experience balancing technical understanding with commercial decision-making. Self-motivated and comfortable working both independently and as part of a fast-paced team. What's on offer: Competitive salary and benefits package. Key strategic role in a growing global manufacturer. Opportunities to influence future product direction and company growth. About Us : At Thomas Lee Recruitment, we specialise in connecting engineers and technical salespeople with leading companies in the engineering sector. We pride ourselves on offering a personalised, professional, and transparent recruitment service. Our focus is on understanding both client and candidate needs to ensure the best possible match. How to Apply : All applications will be responded to. Please ensure you have the right to work in the UK before applying. By applying for this role, you accept our Terms & Conditions, Privacy Policy, and Disclaimers, which can be found on our website.

Job Title: Principal Engineer - Vehicle Motion Control System Architect Location: Barrow-in-Furness / Filton /Coventry - Hybrid - (dependent on business needs) Salary: Competitive (Commensurate with skills and experience) What you'll be doing: Elicit requirements and describe a design solution (from a functional perspective). Understand design constraints (due to existing hardware/ software). Perform functional safety (FuSa), Quality and Cyber analysis on your designs and architect a system than satisfies requirements. Develop, collate and publish evidence in support of, BAE product delivery processes & applicable standards. Ensure you designs translate into MBSE or MathWorks toolchain, without loss of any function. Manage suppliers to deliver the required solutions on time, to quality & budget. Guide the development of more junior members of the team. Be the technical Subject Matter Expert for the vehicle control system. Develop the Validation and Verification plan, including MiL and HiL. Attending factory acceptance tests. Configuration and testing of equipment. Your skills and experiences: Essential: BEng (Hons) / MEng or equivalent in a relevant subject. Demonstrated experience, hands-on , architecting, analysing and developing motion control or flight control systems, within a Systems Engineering framework. Demonstrated experience designing or developing safety critical systems compliant with Functional Safety and System-of-Systems best practice. Demonstrated experience developing systems compliant with cyber security considerations. Good understanding of Newtonian physics, demonstrable experience creating parameterised plant models, filtering and state machines. Significant experience developing the functional definition of bespoke motion or flight control systems that are compliant with at least 1 of IEC 61508 family of functional safety (FuSa) standards (e.g. ARP4761, ARP4654, ISO26262 etc .) Desirable: Further higher education e.g. MSc, PHD, post doc positions. Experience developing real-time MiL& HiL test in a Speedgoat simulation environment or similar (i.e. IPG, VI Grade, dSpace, NI etc .). Experience working on systems that have a HMI & GUI element. Technical report writing skills. CEng Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Vehicle Control Team: An excellent opportunity has arisen for a Principal Engineer -Vehicle Motion Control System Architect, working within The Vehicle Control Team The Principal Engineer (Vehicle Control System Functional Architect) - shall provide support to the Engineering Manager and/or external specialists during design, development, analysis , integration and verification of our platform's motion control system (flight controls ). The Principal Engineer shall lead the development of our flight controls design solution. They must be familiar with functional safety and cyber security principles and be a role model for the application of systems engineering activities within the team. The Principal Engineer shall be responsible for technical leadership , concurrent with fostering a proactive team culture and developing the competency and skills of the team. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 14th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.