Faresaver Buses is an independent family owned bus company. We require a qualified PSV/HGV fitter to join our friendly team of fitters working on our fleet of modern service buses. The fleet comprises of Optare Solos, Alexander Dennis and Volvo buses. Experience in a bus company would be preferred, but is not essential. Must hold NVQ level III or equivalent. PSV or HGV licence is preferred, training will be given in order to obtain this qualification if required. The successful candidate will be suitably qualified and experienced in the maintenance of commercial vehicles, be self motivated and have an easy going but efficient approach to work. This position is for a rotating shift 6am to 2pm and 2pm to 10pm. The hours will be a basic 40 hours per week. Saturday working on a rota at £26.00 per hour. Pay is weekly. Rates quoted are based on a 40 hour week at a rotating shift rate. Own tools are essential. Our main depot and the job are located in Chippenham SN14 6NQ. Job Types: Full-time, Permanent Benefits: Company pension Cycle to work scheme Free or subsidised travel On-site parking Experience: Heavy Goods Vehicles & Construction Plant Mechanics: 1 year (preferred) Licence/Certification: Driving Licence (required) Work Location: In person Job Types: Permanent, Full-time Pay: £22.00 per hour Experience: Heavy Goods Vehicles & Construction Plant Mechanics: 1 year (preferred) Licence/Certification: Driving Licence (required) Work Location: In person
May 23, 2026
Full time
Faresaver Buses is an independent family owned bus company. We require a qualified PSV/HGV fitter to join our friendly team of fitters working on our fleet of modern service buses. The fleet comprises of Optare Solos, Alexander Dennis and Volvo buses. Experience in a bus company would be preferred, but is not essential. Must hold NVQ level III or equivalent. PSV or HGV licence is preferred, training will be given in order to obtain this qualification if required. The successful candidate will be suitably qualified and experienced in the maintenance of commercial vehicles, be self motivated and have an easy going but efficient approach to work. This position is for a rotating shift 6am to 2pm and 2pm to 10pm. The hours will be a basic 40 hours per week. Saturday working on a rota at £26.00 per hour. Pay is weekly. Rates quoted are based on a 40 hour week at a rotating shift rate. Own tools are essential. Our main depot and the job are located in Chippenham SN14 6NQ. Job Types: Full-time, Permanent Benefits: Company pension Cycle to work scheme Free or subsidised travel On-site parking Experience: Heavy Goods Vehicles & Construction Plant Mechanics: 1 year (preferred) Licence/Certification: Driving Licence (required) Work Location: In person Job Types: Permanent, Full-time Pay: £22.00 per hour Experience: Heavy Goods Vehicles & Construction Plant Mechanics: 1 year (preferred) Licence/Certification: Driving Licence (required) Work Location: In person
Skilled Coachbuilder Workshop based Are you a qualified, experienced MIG Welder living in the Cumbernauld area? Have you experience with metal fabrication? Working hours, 40 per week, 7:30am 4pm, Full time, permanent position Salary: up to £39,000 p/a plus overtime About this Coachbuilder Role: We are looking for a skilled Welder/Fabricator to join the team at our client s workshop in Cumbernauld. Predominantly you will be MIG welding but knowledge, experience in TIG and stick welding will be of benefit. The role will involve welding and fabricating a variety of metals to ensure the new design fits on to a vehicle Key Responsibilities: Proficient in welding and fabrication processes: Use a variety of welding techniques (MIG, TIG, Arc) to work with different materials such as stainless steel, carbon steel, and other alloys. Oxy/Acetylene cutting. Operation of JIB cranes and overhead cranes. Slinging and lifting operations, ensuring safety at all times. Interpret engineering drawings and blueprints to understand the specifications of components and assemblies. Work closely with the production and manufacturing teams to meet agreed timelines Requirements: Proven experience as a Welder and Fabricator, within the Automotive industry. Experienced with Vehicle Body Repair, Commercial Vehicle Bodywork, Taillifts Strong knowledge of welding techniques and equipment, including MIG, TIG, and Arc welding. Ability to read and interpret technical drawings and blueprints. Experience working with materials like stainless steel, carbon steel, and alloys. Kautec Recruitment recruit for a variety of sectors, specialising in the Engineering, Fleet Management, Commercial Vehicle, Municipal/Waste and Bespoke equipment areas and are actively seeking to recruit HGV Technicians, HGV Fitters, Mechanics, Mobile Technicians, PSV Technicians, Engineers (Mechanical and Electrical) for our Fleet Management Clients across the UK. Get in touch for further details, I am looking to speak to experienced Welders / Fabricators who are looking for a rewarding and challenging permanent position, start the journey for the next step in your career, apply now with your CV.
May 23, 2026
Full time
Skilled Coachbuilder Workshop based Are you a qualified, experienced MIG Welder living in the Cumbernauld area? Have you experience with metal fabrication? Working hours, 40 per week, 7:30am 4pm, Full time, permanent position Salary: up to £39,000 p/a plus overtime About this Coachbuilder Role: We are looking for a skilled Welder/Fabricator to join the team at our client s workshop in Cumbernauld. Predominantly you will be MIG welding but knowledge, experience in TIG and stick welding will be of benefit. The role will involve welding and fabricating a variety of metals to ensure the new design fits on to a vehicle Key Responsibilities: Proficient in welding and fabrication processes: Use a variety of welding techniques (MIG, TIG, Arc) to work with different materials such as stainless steel, carbon steel, and other alloys. Oxy/Acetylene cutting. Operation of JIB cranes and overhead cranes. Slinging and lifting operations, ensuring safety at all times. Interpret engineering drawings and blueprints to understand the specifications of components and assemblies. Work closely with the production and manufacturing teams to meet agreed timelines Requirements: Proven experience as a Welder and Fabricator, within the Automotive industry. Experienced with Vehicle Body Repair, Commercial Vehicle Bodywork, Taillifts Strong knowledge of welding techniques and equipment, including MIG, TIG, and Arc welding. Ability to read and interpret technical drawings and blueprints. Experience working with materials like stainless steel, carbon steel, and alloys. Kautec Recruitment recruit for a variety of sectors, specialising in the Engineering, Fleet Management, Commercial Vehicle, Municipal/Waste and Bespoke equipment areas and are actively seeking to recruit HGV Technicians, HGV Fitters, Mechanics, Mobile Technicians, PSV Technicians, Engineers (Mechanical and Electrical) for our Fleet Management Clients across the UK. Get in touch for further details, I am looking to speak to experienced Welders / Fabricators who are looking for a rewarding and challenging permanent position, start the journey for the next step in your career, apply now with your CV.
Are you a fully qualified HGV Fitter, HGV Mechanic, HGV Technician living in the Matlock or surrounding area looking for a workshop based role? Are you looking for a Monday to Friday, 6:00am - 3:00pm day shift role? Permanent, Full-time role, 40 hours per week, Salary up to £47,000p/a The role of the HGV Technician: You will be working on a variety of tractor units, municipals, RCV's, sweepers, dust carts, gritters, the odd tanker and tanker unit. You will be carrying out inspections and general maintenance to a diverse fleet and you can expect to be situated in a positive and vibrant working environment. Responsibilities of a HGV Technician (but is not limited to): - Routine (and preventative) maintenance - MOT preparation - Scheduled servicing to DVSA standards - 6 (or 8) weekly inspections - Correction of running defects Requirements for this HGV Technician position : - Fully qualified (City & Guilds), NVQ or equivalent. - Additional accreditations such as IRTEC or an EV qualification would be desirable but not essential. Kautec Recruitment recruit for a variety of sectors and are actively seeking to recruit HGV Technicians, HGV Fitters, Mechanics, Mobile Technicians, PSV Technicians, Engineers for our Fleet Management Clients across the UK. HGV Technician Vacancy Location: Matlock Day shift: Monday to Friday, 6:00am - 3:00pm 40 hours per week, plus overtime Salary up to £47,000 Permanent, full time position So, what are you waiting for. Get in touch for further details and start that next journey on your career, we're just a click away, apply now with your CV.
May 22, 2026
Full time
Are you a fully qualified HGV Fitter, HGV Mechanic, HGV Technician living in the Matlock or surrounding area looking for a workshop based role? Are you looking for a Monday to Friday, 6:00am - 3:00pm day shift role? Permanent, Full-time role, 40 hours per week, Salary up to £47,000p/a The role of the HGV Technician: You will be working on a variety of tractor units, municipals, RCV's, sweepers, dust carts, gritters, the odd tanker and tanker unit. You will be carrying out inspections and general maintenance to a diverse fleet and you can expect to be situated in a positive and vibrant working environment. Responsibilities of a HGV Technician (but is not limited to): - Routine (and preventative) maintenance - MOT preparation - Scheduled servicing to DVSA standards - 6 (or 8) weekly inspections - Correction of running defects Requirements for this HGV Technician position : - Fully qualified (City & Guilds), NVQ or equivalent. - Additional accreditations such as IRTEC or an EV qualification would be desirable but not essential. Kautec Recruitment recruit for a variety of sectors and are actively seeking to recruit HGV Technicians, HGV Fitters, Mechanics, Mobile Technicians, PSV Technicians, Engineers for our Fleet Management Clients across the UK. HGV Technician Vacancy Location: Matlock Day shift: Monday to Friday, 6:00am - 3:00pm 40 hours per week, plus overtime Salary up to £47,000 Permanent, full time position So, what are you waiting for. Get in touch for further details and start that next journey on your career, we're just a click away, apply now with your CV.
Excellent opportunity for an HGV Trailer Fitter Technician Engineer to join a well-established company Salary: Up to £42,000 per annum depending on experience Job Type: Full Time / Permanent Location: Haydock Benefits: 5% employers pension contribution, annual holidays Job description They are a small but rapidly growing business who pride themselves in offering high standard HGV trailer services which include MOT's, breakdowns, damage/accident repairs and trailer services. Due to the business expanding, they have an exciting opportunity for someone who has drive and is willing to learn and progress. We are recruiting a HGV Trailer Technician/Fitter to join their small team of professionals based at their equipped workshop facility on Haydock Industrial Estate. Hours - 42.5 hour working week Hours 8am-5pm The Role Mechanical servicing and repairs on HGV Trailers and occasional trucks MOT Preparation. Carry out PMI inspections. Diagnose faults and repair effectively. Ensure Trailers are repaired to a high standard, road worthy and safe. Complete digital worksheets and service sheets on tablet provided. Use tools effectively and safely, keeping in line with good health & safety practice. What we are looking for Mechanical experience on HGV Trailers is essential. NVQ, City & Guilds & Irtec qualifications desirable. Knowledge of mechanical systems, fitting and maintenance Knowledge of PSV/ MOT Trailer inspections Can work safely in a workshop setting. Ability to work alone and as part of a team. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
May 20, 2026
Full time
Excellent opportunity for an HGV Trailer Fitter Technician Engineer to join a well-established company Salary: Up to £42,000 per annum depending on experience Job Type: Full Time / Permanent Location: Haydock Benefits: 5% employers pension contribution, annual holidays Job description They are a small but rapidly growing business who pride themselves in offering high standard HGV trailer services which include MOT's, breakdowns, damage/accident repairs and trailer services. Due to the business expanding, they have an exciting opportunity for someone who has drive and is willing to learn and progress. We are recruiting a HGV Trailer Technician/Fitter to join their small team of professionals based at their equipped workshop facility on Haydock Industrial Estate. Hours - 42.5 hour working week Hours 8am-5pm The Role Mechanical servicing and repairs on HGV Trailers and occasional trucks MOT Preparation. Carry out PMI inspections. Diagnose faults and repair effectively. Ensure Trailers are repaired to a high standard, road worthy and safe. Complete digital worksheets and service sheets on tablet provided. Use tools effectively and safely, keeping in line with good health & safety practice. What we are looking for Mechanical experience on HGV Trailers is essential. NVQ, City & Guilds & Irtec qualifications desirable. Knowledge of mechanical systems, fitting and maintenance Knowledge of PSV/ MOT Trailer inspections Can work safely in a workshop setting. Ability to work alone and as part of a team. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
15 - 18 an hr (DOE), working Monday to Friday 8am -4pm/3.30pm on a Friday (days, no shifts). Overtime being paid at 1.5. The working environment is clean and organised. Location Near Birstall, easily reached from the M62 Corridor (Leeds to Huddersfield) The position offers the opportunity to work for a company that provides excellent training and working conditions. We would be very keen to speak to people who have worked as Apprentice trained or Semi Skilled Fitters that have worked with, plant machninery, vehicles or HGV or PSV fitters, Hydraulics engineers, Coachbuilders, Vehicle Technicians etc The Mechanical Fitter role: Fitting of mechanical installations incorporating hydraulic/pneumatic components to new vehicles. (Full training given as the work is bespoke in nature) The work is varied and interesting a training will give due to the bespoke nature of the work. Mounting products to vehicles in accordance with build instructions Ensuring all products meet all necessary quality requirements Maintaining all necessary documents and records required by the company quality systems Maintaining a high standard of housekeeping Reporting any defects and quality issues immediately to production supervisor/quality engineer Adherence to company health and safety procedures . The role is varied and you would be required to read basic engineering drawings as well as work with your initiative Benefits of the position 15 - 18 an hr DOE Monday to Friday - Early finish on a Friday Friendly team - Good working atmosphere Good holiday and additional company benefits that can be discussed prior to interviewing If you would like a private chat about the role before submitting your application. Please contact Rodger Morley ay E3 Recruitment.
May 17, 2026
Full time
15 - 18 an hr (DOE), working Monday to Friday 8am -4pm/3.30pm on a Friday (days, no shifts). Overtime being paid at 1.5. The working environment is clean and organised. Location Near Birstall, easily reached from the M62 Corridor (Leeds to Huddersfield) The position offers the opportunity to work for a company that provides excellent training and working conditions. We would be very keen to speak to people who have worked as Apprentice trained or Semi Skilled Fitters that have worked with, plant machninery, vehicles or HGV or PSV fitters, Hydraulics engineers, Coachbuilders, Vehicle Technicians etc The Mechanical Fitter role: Fitting of mechanical installations incorporating hydraulic/pneumatic components to new vehicles. (Full training given as the work is bespoke in nature) The work is varied and interesting a training will give due to the bespoke nature of the work. Mounting products to vehicles in accordance with build instructions Ensuring all products meet all necessary quality requirements Maintaining all necessary documents and records required by the company quality systems Maintaining a high standard of housekeeping Reporting any defects and quality issues immediately to production supervisor/quality engineer Adherence to company health and safety procedures . The role is varied and you would be required to read basic engineering drawings as well as work with your initiative Benefits of the position 15 - 18 an hr DOE Monday to Friday - Early finish on a Friday Friendly team - Good working atmosphere Good holiday and additional company benefits that can be discussed prior to interviewing If you would like a private chat about the role before submitting your application. Please contact Rodger Morley ay E3 Recruitment.
Questech Automotive Recruitment are recruiting on behalf of one of the biggest Fleet Manufacturers in the World who are recruiting for experienced HGV Technicians on a permanent basis. We are looking for Technicians/mechanics from a Commercial, HGV, PSV or LGV background. The role will be working a 4 on 4 off rotation working 07:00 -19:00 week with an hourly rate of 21.00 per hour for the right candidates You will be an apprentice trained, fully qualified Technician that has experience working with a variety of LGV or HGV vehicles. The role: Electrical, mechanical and hydraulic fault diagnosis, repair and installation Setting and operating of machine tools and equipment Support workshops team members including Apprentice Technicians as required. Accurately record time to complete jobs and associated details Use of skills and performance of other work within normal grade/job skills as required by the Workshop Supervisor to maximise workshop efficiency Skills & Experience: Level 3 Motor Vehicle Mechanics City & Guilds/NVQ or equivalent. Previous experience as a qualified Fitter/Mechanic/Engineer Possession of own tools Anyone interested please apply below or contact Matt Staniforth at Questech Recruitment Questech Recruitment is a specialist engineering support within the road transport industry, our focus is to support many clients within the truck and bus sectors across the UK. If you feel you match the desired criteria, or you would like more information on roles such as Commercial Vehicle Technician, PSV Engineer, PSV Mechanic, LCV mechanic or Fitter, we would really like to hear from you.
Oct 29, 2025
Full time
Questech Automotive Recruitment are recruiting on behalf of one of the biggest Fleet Manufacturers in the World who are recruiting for experienced HGV Technicians on a permanent basis. We are looking for Technicians/mechanics from a Commercial, HGV, PSV or LGV background. The role will be working a 4 on 4 off rotation working 07:00 -19:00 week with an hourly rate of 21.00 per hour for the right candidates You will be an apprentice trained, fully qualified Technician that has experience working with a variety of LGV or HGV vehicles. The role: Electrical, mechanical and hydraulic fault diagnosis, repair and installation Setting and operating of machine tools and equipment Support workshops team members including Apprentice Technicians as required. Accurately record time to complete jobs and associated details Use of skills and performance of other work within normal grade/job skills as required by the Workshop Supervisor to maximise workshop efficiency Skills & Experience: Level 3 Motor Vehicle Mechanics City & Guilds/NVQ or equivalent. Previous experience as a qualified Fitter/Mechanic/Engineer Possession of own tools Anyone interested please apply below or contact Matt Staniforth at Questech Recruitment Questech Recruitment is a specialist engineering support within the road transport industry, our focus is to support many clients within the truck and bus sectors across the UK. If you feel you match the desired criteria, or you would like more information on roles such as Commercial Vehicle Technician, PSV Engineer, PSV Mechanic, LCV mechanic or Fitter, we would really like to hear from you.
Ford & Stanley Talentwise
Bristol, Gloucestershire
Currently looking for a Mechanical Fitter to join a globally recognised engineering business, in Bristol, on a rolling contract basis. The role is based on a Monday to Friday day shift. The Opportunity: The opportunity to join one of the biggest names in the engineering sectors in the UK, that is expanding their heavy maintenance function, with a main focus on the servicing, maintenance and repair of transportation vehicles, to accommodate a large increase of workload due to recent contract wins and legacy work. Key responsibilities: Carry out work to the companies internal standards as requested by line managers. Mechanical and electrical fitment activities onto rolling stock vehicles. Ensuring all relevant paperwork for examinations and repairs is correctly completed to company standards. Adhering to health & safety and local safety policy requirements, and other safety and technical standards. Candidate Essentials: Must have experience working within a transportation engineering environment (Rail, Automotive, HGV, PSV, Aerospace, Plant). Experience within either mechanical fitment or maintenance. Must be able to read and interpret engineering drawings/schematics. Competent in the use of hand-held tooling, power tools, and pneumatic tools. Qualifications: Minimum of a level 3 NVQ (or equivalent) in an engineering discipline Full UK Drivers License Likely Job Titles: Mechanical Fitter / Mechanic / HGV Mechanic / Plant Fitter About Ford & Stanley Group Ford & Stanley Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. Ford & Stanley Group Ltd is a Disability Confident Committed employer and is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective of sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy.
Oct 07, 2025
Contractor
Currently looking for a Mechanical Fitter to join a globally recognised engineering business, in Bristol, on a rolling contract basis. The role is based on a Monday to Friday day shift. The Opportunity: The opportunity to join one of the biggest names in the engineering sectors in the UK, that is expanding their heavy maintenance function, with a main focus on the servicing, maintenance and repair of transportation vehicles, to accommodate a large increase of workload due to recent contract wins and legacy work. Key responsibilities: Carry out work to the companies internal standards as requested by line managers. Mechanical and electrical fitment activities onto rolling stock vehicles. Ensuring all relevant paperwork for examinations and repairs is correctly completed to company standards. Adhering to health & safety and local safety policy requirements, and other safety and technical standards. Candidate Essentials: Must have experience working within a transportation engineering environment (Rail, Automotive, HGV, PSV, Aerospace, Plant). Experience within either mechanical fitment or maintenance. Must be able to read and interpret engineering drawings/schematics. Competent in the use of hand-held tooling, power tools, and pneumatic tools. Qualifications: Minimum of a level 3 NVQ (or equivalent) in an engineering discipline Full UK Drivers License Likely Job Titles: Mechanical Fitter / Mechanic / HGV Mechanic / Plant Fitter About Ford & Stanley Group Ford & Stanley Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. Ford & Stanley Group Ltd is a Disability Confident Committed employer and is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective of sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy.
Procters Coaches (North Yorkshire) Ltd
Gatenby, Yorkshire
Join Our Team at Leeming Bar Depot! Are you a skilled PCV technician looking for an exciting opportunity? Look no further! We are seeking a skilled and dependable Shift PSV Bus & Coach Technician to join our team in Leeming Bar, North Yorkshire . You will play a vital role in maintaining the safety, reliability, and roadworthiness of our modern fleet of Public Service Vehicles (PSVs), including buses and coaches. Key Responsibilities Perform scheduled servicing, inspections, and repairs on PSV vehicles. Diagnose and repair mechanical, electrical, pneumatic, and hydraulic faults. Prepare vehicles for MOT testing, ensuring compliance with DVSA safety and maintenance standards. Complete all relevant paperwork accurately, including job cards and inspection reports. Adhere to all health & safety policies and maintain a clean and safe work environment. Attend to urgent vehicle breakdowns or repairs during shift hours when required. Communicate additional defects or issues promptly to the Engineering Manager or Engineering Project Manager. Contribute to continuous improvement in workshop practices and operational efficiency. Requirements NVQ Level 3 (or equivalent) in Heavy Vehicle Maintenance or related field. Proven experience maintaining PSVs, coaches, buses, or HGVs. Strong knowledge of vehicle systems, including engines, suspension, braking, and electrics. Ability to work effectively on both early and late shifts. Full UK Driving Licence required ( Category D preferred but not essential). IRTEC accreditation desirable (or willingness to obtain it). High attention to detail and a strong commitment to safety, compliance, and quality. Working Conditions Shift-based workshop role: Early: 6:00 AM - 2:00 PM Late: 4:00 PM - 12:00 Midnight Occasional off-site work for breakdowns and urgent repairs. Full PPE and company uniform provided. What We Offer Structured shifts to promote work-life balance. Opportunity to work with a modern and well-maintained PSV fleet. Ongoing training and development, including IRTEC certification support. A professional, safety-led, and team-oriented environment. Interested? Apply now to become a key member of our experienced maintenance team-helping to keep our fleet on the road and our passengers moving safely every day. To apply, send your CV and cover letter to: Ashley Cowen - Philip Kenyon - For more information, contact us on: Job Type: Full-time Pay: £40,000.00-£45,000.00 per year Benefits: Company pension Flexitime Free parking On-site parking Ability to commute/relocate: Northallerton DL7 9DE: reliably commute or plan to relocate before starting work (required) Experience: LGV or PCV mechanical: 1 year (required) Work authorisation: United Kingdom (required) Work Location: In person
Oct 06, 2025
Full time
Join Our Team at Leeming Bar Depot! Are you a skilled PCV technician looking for an exciting opportunity? Look no further! We are seeking a skilled and dependable Shift PSV Bus & Coach Technician to join our team in Leeming Bar, North Yorkshire . You will play a vital role in maintaining the safety, reliability, and roadworthiness of our modern fleet of Public Service Vehicles (PSVs), including buses and coaches. Key Responsibilities Perform scheduled servicing, inspections, and repairs on PSV vehicles. Diagnose and repair mechanical, electrical, pneumatic, and hydraulic faults. Prepare vehicles for MOT testing, ensuring compliance with DVSA safety and maintenance standards. Complete all relevant paperwork accurately, including job cards and inspection reports. Adhere to all health & safety policies and maintain a clean and safe work environment. Attend to urgent vehicle breakdowns or repairs during shift hours when required. Communicate additional defects or issues promptly to the Engineering Manager or Engineering Project Manager. Contribute to continuous improvement in workshop practices and operational efficiency. Requirements NVQ Level 3 (or equivalent) in Heavy Vehicle Maintenance or related field. Proven experience maintaining PSVs, coaches, buses, or HGVs. Strong knowledge of vehicle systems, including engines, suspension, braking, and electrics. Ability to work effectively on both early and late shifts. Full UK Driving Licence required ( Category D preferred but not essential). IRTEC accreditation desirable (or willingness to obtain it). High attention to detail and a strong commitment to safety, compliance, and quality. Working Conditions Shift-based workshop role: Early: 6:00 AM - 2:00 PM Late: 4:00 PM - 12:00 Midnight Occasional off-site work for breakdowns and urgent repairs. Full PPE and company uniform provided. What We Offer Structured shifts to promote work-life balance. Opportunity to work with a modern and well-maintained PSV fleet. Ongoing training and development, including IRTEC certification support. A professional, safety-led, and team-oriented environment. Interested? Apply now to become a key member of our experienced maintenance team-helping to keep our fleet on the road and our passengers moving safely every day. To apply, send your CV and cover letter to: Ashley Cowen - Philip Kenyon - For more information, contact us on: Job Type: Full-time Pay: £40,000.00-£45,000.00 per year Benefits: Company pension Flexitime Free parking On-site parking Ability to commute/relocate: Northallerton DL7 9DE: reliably commute or plan to relocate before starting work (required) Experience: LGV or PCV mechanical: 1 year (required) Work authorisation: United Kingdom (required) Work Location: In person
An established and growing Oxford firm is currently recruiting for an experienced PSV Technician or HGV Mechanic / Fitter with 5+ years' experience. This is for the maintenance, repair and refitting of coaches and light commercial fleet of vans with a large and busy company. You will be joining an excellent and experienced maintenance team maintaining vehicles in their warm, tidy, organised purpose built workshops, located at Oxfordshire. Duties will include Carrying out vehicle servicing in accordance with company policy Carrying out Periodic Maintenance Inspections and repair to both company and DVSA standards Preparing and presenting for MOTs Diagnosing vehicle faults and specifying the correct method of repair and warranty claims are in line with terms Ensuring correct paperwork is completed and accurate records maintained in a timely manner Adhering to good housekeeping practices including general tidiness in the workshop and return of all tools and equipment to their designated place Attending on-road vehicle breakdowns Carrying out vehicle road testing where necessary to determine specific vehicle defects or following remedial repair Complying with Health and Safety policy and guidance documents Adopting methods of safe working Experience and qualities Level 3 NVQ in PSV or HGV maintenance, repair and diagnostics or equivalent Minimum 5 years industry experience of both mechanical and electrical systems PSV licence would also be desirable (but not essential) Welding experience would also be desirable. Have proven knowledge of the Health and Safety at Work Act Ability to work effectively unsupervised, use own initiative and remain focused and consistent and a 'can do' attitude The position is 40 hours per week, 7.00am - 4.00pm with some overtime offered / required in busy periods, salary is 46k. Further on-going training opportunities are provided if required, pension scheme, great team environment.
Oct 04, 2025
Full time
An established and growing Oxford firm is currently recruiting for an experienced PSV Technician or HGV Mechanic / Fitter with 5+ years' experience. This is for the maintenance, repair and refitting of coaches and light commercial fleet of vans with a large and busy company. You will be joining an excellent and experienced maintenance team maintaining vehicles in their warm, tidy, organised purpose built workshops, located at Oxfordshire. Duties will include Carrying out vehicle servicing in accordance with company policy Carrying out Periodic Maintenance Inspections and repair to both company and DVSA standards Preparing and presenting for MOTs Diagnosing vehicle faults and specifying the correct method of repair and warranty claims are in line with terms Ensuring correct paperwork is completed and accurate records maintained in a timely manner Adhering to good housekeeping practices including general tidiness in the workshop and return of all tools and equipment to their designated place Attending on-road vehicle breakdowns Carrying out vehicle road testing where necessary to determine specific vehicle defects or following remedial repair Complying with Health and Safety policy and guidance documents Adopting methods of safe working Experience and qualities Level 3 NVQ in PSV or HGV maintenance, repair and diagnostics or equivalent Minimum 5 years industry experience of both mechanical and electrical systems PSV licence would also be desirable (but not essential) Welding experience would also be desirable. Have proven knowledge of the Health and Safety at Work Act Ability to work effectively unsupervised, use own initiative and remain focused and consistent and a 'can do' attitude The position is 40 hours per week, 7.00am - 4.00pm with some overtime offered / required in busy periods, salary is 46k. Further on-going training opportunities are provided if required, pension scheme, great team environment.
Procters Coaches (North Yorkshire) Ltd
Gatenby, Yorkshire
Join Our Team at Leeming Bar Depot! Are you a skilled PCV technician looking for an exciting opportunity? Look no further! We are seeking a skilled and dependable Shift PSV Bus & Coach Technician to join our team in Leeming Bar, North Yorkshire . You will play a vital role in maintaining the safety, reliability, and roadworthiness of our modern fleet of Public Service Vehicles (PSVs), including buses and coaches. Key Responsibilities Perform scheduled servicing, inspections, and repairs on PSV vehicles. Diagnose and repair mechanical, electrical, pneumatic, and hydraulic faults. Prepare vehicles for MOT testing, ensuring compliance with DVSA safety and maintenance standards. Complete all relevant paperwork accurately, including job cards and inspection reports. Adhere to all health & safety policies and maintain a clean and safe work environment. Attend to urgent vehicle breakdowns or repairs during shift hours when required. Communicate additional defects or issues promptly to the Engineering Manager or Engineering Project Manager. Contribute to continuous improvement in workshop practices and operational efficiency. Requirements NVQ Level 3 (or equivalent) in Heavy Vehicle Maintenance or related field. Proven experience maintaining PSVs, coaches, buses, or HGVs. Strong knowledge of vehicle systems, including engines, suspension, braking, and electrics. Ability to work effectively on both early and late shifts. Full UK Driving Licence required ( Category D preferred but not essential). IRTEC accreditation desirable (or willingness to obtain it). High attention to detail and a strong commitment to safety, compliance, and quality. Working Conditions Shift-based workshop role: Early: 6:00 AM - 2:00 PM Late: 4:00 PM - 12:00 Midnight Occasional off-site work for breakdowns and urgent repairs. Full PPE and company uniform provided. What We Offer Structured shifts to promote work-life balance. Opportunity to work with a modern and well-maintained PSV fleet. Ongoing training and development, including IRTEC certification support. A professional, safety-led, and team-oriented environment. Interested? Apply now to become a key member of our experienced maintenance team-helping to keep our fleet on the road and our passengers moving safely every day. To apply, send your CV and cover letter to: Ashley Cowen - Philip Kenyon - For more information, contact us on: Job Type: Full-time Pay: £40,000.00-£45,000.00 per year Benefits: Company pension Flexitime Free parking On-site parking Ability to commute/relocate: Northallerton DL7 9DE: reliably commute or plan to relocate before starting work (required) Experience: LGV or PCV mechanical: 1 year (required) Work authorisation: United Kingdom (required) Work Location: In person
Oct 03, 2025
Full time
Join Our Team at Leeming Bar Depot! Are you a skilled PCV technician looking for an exciting opportunity? Look no further! We are seeking a skilled and dependable Shift PSV Bus & Coach Technician to join our team in Leeming Bar, North Yorkshire . You will play a vital role in maintaining the safety, reliability, and roadworthiness of our modern fleet of Public Service Vehicles (PSVs), including buses and coaches. Key Responsibilities Perform scheduled servicing, inspections, and repairs on PSV vehicles. Diagnose and repair mechanical, electrical, pneumatic, and hydraulic faults. Prepare vehicles for MOT testing, ensuring compliance with DVSA safety and maintenance standards. Complete all relevant paperwork accurately, including job cards and inspection reports. Adhere to all health & safety policies and maintain a clean and safe work environment. Attend to urgent vehicle breakdowns or repairs during shift hours when required. Communicate additional defects or issues promptly to the Engineering Manager or Engineering Project Manager. Contribute to continuous improvement in workshop practices and operational efficiency. Requirements NVQ Level 3 (or equivalent) in Heavy Vehicle Maintenance or related field. Proven experience maintaining PSVs, coaches, buses, or HGVs. Strong knowledge of vehicle systems, including engines, suspension, braking, and electrics. Ability to work effectively on both early and late shifts. Full UK Driving Licence required ( Category D preferred but not essential). IRTEC accreditation desirable (or willingness to obtain it). High attention to detail and a strong commitment to safety, compliance, and quality. Working Conditions Shift-based workshop role: Early: 6:00 AM - 2:00 PM Late: 4:00 PM - 12:00 Midnight Occasional off-site work for breakdowns and urgent repairs. Full PPE and company uniform provided. What We Offer Structured shifts to promote work-life balance. Opportunity to work with a modern and well-maintained PSV fleet. Ongoing training and development, including IRTEC certification support. A professional, safety-led, and team-oriented environment. Interested? Apply now to become a key member of our experienced maintenance team-helping to keep our fleet on the road and our passengers moving safely every day. To apply, send your CV and cover letter to: Ashley Cowen - Philip Kenyon - For more information, contact us on: Job Type: Full-time Pay: £40,000.00-£45,000.00 per year Benefits: Company pension Flexitime Free parking On-site parking Ability to commute/relocate: Northallerton DL7 9DE: reliably commute or plan to relocate before starting work (required) Experience: LGV or PCV mechanical: 1 year (required) Work authorisation: United Kingdom (required) Work Location: In person
Full time PSV Mechanic / Fitter required for maintenance of our coach and light commercial van fleet About Vans For Bands Vans for Bands (VFB) is a leading supplier of sleeper coaches and splitter vans to customers from across the music, comedy, events, theatre and TV production and sports industries. It is of vital importance that our fleet is maintained to the very highest standards as set by the company and the DVSA. We are a forward thinking employer who invests in our team through ongoing training and attention to maintaining a healthy work/ life balance. Job Overview You will be joining our mechanical maintenance team maintaining and repairing our sleeper coach and splitter van fleet in our purpose built workshops, located at our Begbroke site (OX5 1RG). Duties will include Carrying out vehicle servicing in accordance with company policy Carrying out Periodic Maintenance Inspections and repair to both company and DVSA standards Preparing and presenting for MOTs Diagnosing vehicle faults and specifying the correct method of repair and warranty claims are in line with terms Ensuring correct paperwork is completed and accurate records maintained in a timely manner Adhering to good housekeeping practices including general tidiness in the workshop and return of all tools and equipment to their designated place Attending on-road vehicle breakdowns Carrying out vehicle road testing where necessary to determine specific vehicle defects or following remedial repair Complying with Health and Safety policy and guidance documents Adopting methods of safe working Experience and qualities Level 3 NVQ in PSV or HGV maintenance, repair and diagnostics or equivalent Minimum 5 years industry experience of both mechanical and electrical systems PSV licence would also be desirable (but not essential) Welding experience would also be desirable. Have proven knowledge of the Health and Safety at Work Act Ability to work effectively unsupervised, use own initiative and remain focused and consistent and a 'can do' attitude Remuneration and hours Full time position / 40 - 45 paid hours per week excluding breaks Overtime will be available when required during busy periods Competitive rate of pay, in line with applicant's experience Further on-going training opportunities Job Type: Full-time Benefits: Company pension Schedule: Monday to Friday Work Location: In person Job Type: Full-time Pay: £35,000.00-£47,000.00 per year Benefits: Company pension Schedule: Monday to Friday Work Location: In person Reference ID: MechMay25
Oct 02, 2025
Full time
Full time PSV Mechanic / Fitter required for maintenance of our coach and light commercial van fleet About Vans For Bands Vans for Bands (VFB) is a leading supplier of sleeper coaches and splitter vans to customers from across the music, comedy, events, theatre and TV production and sports industries. It is of vital importance that our fleet is maintained to the very highest standards as set by the company and the DVSA. We are a forward thinking employer who invests in our team through ongoing training and attention to maintaining a healthy work/ life balance. Job Overview You will be joining our mechanical maintenance team maintaining and repairing our sleeper coach and splitter van fleet in our purpose built workshops, located at our Begbroke site (OX5 1RG). Duties will include Carrying out vehicle servicing in accordance with company policy Carrying out Periodic Maintenance Inspections and repair to both company and DVSA standards Preparing and presenting for MOTs Diagnosing vehicle faults and specifying the correct method of repair and warranty claims are in line with terms Ensuring correct paperwork is completed and accurate records maintained in a timely manner Adhering to good housekeeping practices including general tidiness in the workshop and return of all tools and equipment to their designated place Attending on-road vehicle breakdowns Carrying out vehicle road testing where necessary to determine specific vehicle defects or following remedial repair Complying with Health and Safety policy and guidance documents Adopting methods of safe working Experience and qualities Level 3 NVQ in PSV or HGV maintenance, repair and diagnostics or equivalent Minimum 5 years industry experience of both mechanical and electrical systems PSV licence would also be desirable (but not essential) Welding experience would also be desirable. Have proven knowledge of the Health and Safety at Work Act Ability to work effectively unsupervised, use own initiative and remain focused and consistent and a 'can do' attitude Remuneration and hours Full time position / 40 - 45 paid hours per week excluding breaks Overtime will be available when required during busy periods Competitive rate of pay, in line with applicant's experience Further on-going training opportunities Job Type: Full-time Benefits: Company pension Schedule: Monday to Friday Work Location: In person Job Type: Full-time Pay: £35,000.00-£47,000.00 per year Benefits: Company pension Schedule: Monday to Friday Work Location: In person Reference ID: MechMay25
Job Role: HGV Technician Location: Coventry Pay: 21.36 per hour, O/T 32.05 per hour Hours: M-F Day shift Benefits 33 days holiday (increases with service), overtime paid at 1.5 X, Weekly pay, pension, death in service, wellbeing programme, free onsite parking, excellent ongoing training, 2 x 30 minute breaks, cycle to work scheme HGV Technician / Mechanic / Fitter opportunity My client, a well-established fleet maintenance company is actively seeking to employ an experienced HGV or PSV Technician for their site in Coventry. You will be working on an internal fleet of commercial vehicles. This is a permanent role with weekly pay. Role available due to increased workloads with exciting plans to expand the workshop to take on third party work. So a great time to join HGV Technician / Mechanic / Fitter duties You will be working on an inhouse fleet of commercial vehicles to include tractor units, trailers, skip loaders and front loaders Working in a well-equipped workshop, the successful HGV Technician / Mechanic / Fitter will be required to undertake all aspects of vehicle service and maintenance. Duties range from correction of running defects to full vehicle overhauls, diagnostics and everything in between. You will also be required to undertake inspections and pre-MOT checks and undertake any repairs that are required. HGV Technician / Mechanic / Fitter Qualifications / experience required In order to qualify for the role, the successful HGV Technician / Mechanic / Fitter will ideally have industry recognised qualifications (NVQ or City & Guilds) but time served is also fine You must have extensive experience as an HGV or PSV Technician / Mechanic / Fitter and be familiar with modern commercial vehicles. IRTEC trained would be beneficial but not essential Full UK driving licence If you are an experienced HGV or PSV Technician / Mechanic / Fitter and would like to apply for this role please make an application via this advert INDPB
Oct 02, 2025
Full time
Job Role: HGV Technician Location: Coventry Pay: 21.36 per hour, O/T 32.05 per hour Hours: M-F Day shift Benefits 33 days holiday (increases with service), overtime paid at 1.5 X, Weekly pay, pension, death in service, wellbeing programme, free onsite parking, excellent ongoing training, 2 x 30 minute breaks, cycle to work scheme HGV Technician / Mechanic / Fitter opportunity My client, a well-established fleet maintenance company is actively seeking to employ an experienced HGV or PSV Technician for their site in Coventry. You will be working on an internal fleet of commercial vehicles. This is a permanent role with weekly pay. Role available due to increased workloads with exciting plans to expand the workshop to take on third party work. So a great time to join HGV Technician / Mechanic / Fitter duties You will be working on an inhouse fleet of commercial vehicles to include tractor units, trailers, skip loaders and front loaders Working in a well-equipped workshop, the successful HGV Technician / Mechanic / Fitter will be required to undertake all aspects of vehicle service and maintenance. Duties range from correction of running defects to full vehicle overhauls, diagnostics and everything in between. You will also be required to undertake inspections and pre-MOT checks and undertake any repairs that are required. HGV Technician / Mechanic / Fitter Qualifications / experience required In order to qualify for the role, the successful HGV Technician / Mechanic / Fitter will ideally have industry recognised qualifications (NVQ or City & Guilds) but time served is also fine You must have extensive experience as an HGV or PSV Technician / Mechanic / Fitter and be familiar with modern commercial vehicles. IRTEC trained would be beneficial but not essential Full UK driving licence If you are an experienced HGV or PSV Technician / Mechanic / Fitter and would like to apply for this role please make an application via this advert INDPB
Mobile HGV Technician Location: Greater Manchester, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime available The Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician Diagnostic analysis, repairs or preventative maintenance Provide a customer facing product support Complete PDI inspections Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer's specification and company policy Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required Accurately complete all relevant paperwork including engineer's reports, inspections, calibrations check and job sheets. Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings Experience required for the Mobile HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment. Hands-on experience with a range of HGVs and specialist vehicles. Other: Full UK driving licence. Good work ethic Willing to learn City & Guilds Level 3 - Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous What We Offer A varied and rewarding full-time role with a market-leading company. A supportive team environment with opportunities for training and personal development. Excellent benefits package including: Company pension scheme Cycle-to-work scheme Free or subsidised travel Wellness programme Further training and career progression opportunities For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.
Oct 02, 2025
Full time
Mobile HGV Technician Location: Greater Manchester, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime available The Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician Diagnostic analysis, repairs or preventative maintenance Provide a customer facing product support Complete PDI inspections Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer's specification and company policy Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required Accurately complete all relevant paperwork including engineer's reports, inspections, calibrations check and job sheets. Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings Experience required for the Mobile HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment. Hands-on experience with a range of HGVs and specialist vehicles. Other: Full UK driving licence. Good work ethic Willing to learn City & Guilds Level 3 - Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous What We Offer A varied and rewarding full-time role with a market-leading company. A supportive team environment with opportunities for training and personal development. Excellent benefits package including: Company pension scheme Cycle-to-work scheme Free or subsidised travel Wellness programme Further training and career progression opportunities For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.
Mobile HGV Technician Location: Northampton, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime available The Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician Diagnostic analysis, repairs or preventative maintenance Provide a customer facing product support Complete PDI inspections Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer's specification and company policy Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required Accurately complete all relevant paperwork including engineer's reports, inspections, calibrations check and job sheets. Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings Experience required for the Mobile HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment. Hands-on experience with a range of HGVs and specialist vehicles. Other: Full UK driving licence. Good work ethic Willing to learn City & Guilds Level 3 - Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous What We Offer A varied and rewarding full-time role with a market-leading company. A supportive team environment with opportunities for training and personal development. Excellent benefits package including: Company pension scheme Cycle-to-work scheme Free or subsidised travel Wellness programme Further training and career progression opportunities For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.
Oct 02, 2025
Full time
Mobile HGV Technician Location: Northampton, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime available The Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician Diagnostic analysis, repairs or preventative maintenance Provide a customer facing product support Complete PDI inspections Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer's specification and company policy Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required Accurately complete all relevant paperwork including engineer's reports, inspections, calibrations check and job sheets. Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings Experience required for the Mobile HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment. Hands-on experience with a range of HGVs and specialist vehicles. Other: Full UK driving licence. Good work ethic Willing to learn City & Guilds Level 3 - Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous What We Offer A varied and rewarding full-time role with a market-leading company. A supportive team environment with opportunities for training and personal development. Excellent benefits package including: Company pension scheme Cycle-to-work scheme Free or subsidised travel Wellness programme Further training and career progression opportunities For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.
Mobile HGV Technician Location: Enfield, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime available The Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician Diagnostic analysis, repairs or preventative maintenance Provide a customer facing product support Complete PDI inspections Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer's specification and company policy Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required Accurately complete all relevant paperwork including engineer's reports, inspections, calibrations check and job sheets. Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings Experience required for the Mobile HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment. Hands-on experience with a range of HGVs and specialist vehicles. Other: Full UK driving licence. Good work ethic Willing to learn City & Guilds Level 3 - Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous What We Offer A varied and rewarding full-time role with a market-leading company. A supportive team environment with opportunities for training and personal development. Excellent benefits package including: Company pension scheme Cycle-to-work scheme Free or subsidised travel Wellness programme Further training and career progression opportunities For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.
Oct 01, 2025
Full time
Mobile HGV Technician Location: Enfield, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime available The Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician Diagnostic analysis, repairs or preventative maintenance Provide a customer facing product support Complete PDI inspections Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer's specification and company policy Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required Accurately complete all relevant paperwork including engineer's reports, inspections, calibrations check and job sheets. Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings Experience required for the Mobile HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment. Hands-on experience with a range of HGVs and specialist vehicles. Other: Full UK driving licence. Good work ethic Willing to learn City & Guilds Level 3 - Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous What We Offer A varied and rewarding full-time role with a market-leading company. A supportive team environment with opportunities for training and personal development. Excellent benefits package including: Company pension scheme Cycle-to-work scheme Free or subsidised travel Wellness programme Further training and career progression opportunities For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.
Questech Automotive Recruitment are recruiting on behalf of the biggest Fleet Operator in the UK who are recruiting for experienced Vehicle Technicians on a permanent basis. We are looking for Technicians/mechanics from a Commercial, HGV, PSV or LGV background. We have a variety of shifts available so please get in touch if you are level 3 qualified with a proven track record as a Mechanic. As well as a generous basic salary, our client also offers other benefits including, life insurance, enhanced pension and other additional perks and, annual pay rises, 33 days holiday. You will be an apprentice trained, fully qualified Technician that has experience working with a variety of LGV or HGV vehicles. The role: Electrical, mechanical and hydraulic fault diagnosis, repair and installation Setting and operating of machine tools and equipment Support workshops team members including Apprentice Technicians as required. Accurately record time to complete jobs and associated details Use of skills and performance of other work within normal grade/job skills as required by the Workshop Supervisor to maximise workshop efficiency Skills & Experience: Level 3 Motor Vehicle Mechanics City & Guilds/NVQ or equivalent. Previous experience as a qualified Fitter/Mechanic/Engineer Possession of own tools Questech Recruitment is a specialist engineering support within the road transport industry, our focus is to support many clients within the truck and bus sectors across the UK. If you feel you match the desired criteria, or you would like more information on roles such as Commercial Vehicle Technician, PSV Engineer, PSV Mechanic, LCV mechanic or Fitter, we would really like to hear from you.
Oct 01, 2025
Full time
Questech Automotive Recruitment are recruiting on behalf of the biggest Fleet Operator in the UK who are recruiting for experienced Vehicle Technicians on a permanent basis. We are looking for Technicians/mechanics from a Commercial, HGV, PSV or LGV background. We have a variety of shifts available so please get in touch if you are level 3 qualified with a proven track record as a Mechanic. As well as a generous basic salary, our client also offers other benefits including, life insurance, enhanced pension and other additional perks and, annual pay rises, 33 days holiday. You will be an apprentice trained, fully qualified Technician that has experience working with a variety of LGV or HGV vehicles. The role: Electrical, mechanical and hydraulic fault diagnosis, repair and installation Setting and operating of machine tools and equipment Support workshops team members including Apprentice Technicians as required. Accurately record time to complete jobs and associated details Use of skills and performance of other work within normal grade/job skills as required by the Workshop Supervisor to maximise workshop efficiency Skills & Experience: Level 3 Motor Vehicle Mechanics City & Guilds/NVQ or equivalent. Previous experience as a qualified Fitter/Mechanic/Engineer Possession of own tools Questech Recruitment is a specialist engineering support within the road transport industry, our focus is to support many clients within the truck and bus sectors across the UK. If you feel you match the desired criteria, or you would like more information on roles such as Commercial Vehicle Technician, PSV Engineer, PSV Mechanic, LCV mechanic or Fitter, we would really like to hear from you.
Questech Automotive Recruitment are recruiting on behalf of one of the biggest Fleet Operator in the UK who are recruiting for experienced HGV Technicians on a permanent basis. We are looking for Technicians/mechanics from a Commercial, HGV, PSV or LGV background. The role will be working Monday to Friday 40 hours a week with an hourly rate of 18.00 per hour with time and a half for overtime. You will be an apprentice trained, fully qualified Technician that has experience working with a variety of LGV or HGV vehicles. The role: Electrical, mechanical and hydraulic fault diagnosis, repair and installation Setting and operating of machine tools and equipment Support workshops team members including Apprentice Technicians as required. Accurately record time to complete jobs and associated details Use of skills and performance of other work within normal grade/job skills as required by the Workshop Supervisor to maximise workshop efficiency Skills & Experience: Level 3 Motor Vehicle Mechanics City & Guilds/NVQ or equivalent. Previous experience as a qualified Fitter/Mechanic/Engineer Possession of own tools Anyone interested please apply below or contact Matt Staniforth at Questech Recruitment Questech Recruitment is a specialist engineering support within the road transport industry, our focus is to support many clients within the truck and bus sectors across the UK. If you feel you match the desired criteria, or you would like more information on roles such as Commercial Vehicle Technician, PSV Engineer, PSV Mechanic, LCV mechanic or Fitter, we would really like to hear from you.
Oct 01, 2025
Full time
Questech Automotive Recruitment are recruiting on behalf of one of the biggest Fleet Operator in the UK who are recruiting for experienced HGV Technicians on a permanent basis. We are looking for Technicians/mechanics from a Commercial, HGV, PSV or LGV background. The role will be working Monday to Friday 40 hours a week with an hourly rate of 18.00 per hour with time and a half for overtime. You will be an apprentice trained, fully qualified Technician that has experience working with a variety of LGV or HGV vehicles. The role: Electrical, mechanical and hydraulic fault diagnosis, repair and installation Setting and operating of machine tools and equipment Support workshops team members including Apprentice Technicians as required. Accurately record time to complete jobs and associated details Use of skills and performance of other work within normal grade/job skills as required by the Workshop Supervisor to maximise workshop efficiency Skills & Experience: Level 3 Motor Vehicle Mechanics City & Guilds/NVQ or equivalent. Previous experience as a qualified Fitter/Mechanic/Engineer Possession of own tools Anyone interested please apply below or contact Matt Staniforth at Questech Recruitment Questech Recruitment is a specialist engineering support within the road transport industry, our focus is to support many clients within the truck and bus sectors across the UK. If you feel you match the desired criteria, or you would like more information on roles such as Commercial Vehicle Technician, PSV Engineer, PSV Mechanic, LCV mechanic or Fitter, we would really like to hear from you.
Questech Automotive Recruitment are recruiting on behalf of one of the biggest Fleet Manufacturers in the World who are recruiting for experienced HGV Technicians on a permanent basis. We are looking for Technicians/mechanics from a Commercial, HGV, PSV or LGV background. The role will be working a 4 on 4 off rotation working 07:00 -19:00 week with an hourly rate of 21.00 per hour for the right candidates You will be an apprentice trained, fully qualified Technician that has experience working with a variety of LGV or HGV vehicles. The role: Electrical, mechanical and hydraulic fault diagnosis, repair and installation Setting and operating of machine tools and equipment Support workshops team members including Apprentice Technicians as required. Accurately record time to complete jobs and associated details Use of skills and performance of other work within normal grade/job skills as required by the Workshop Supervisor to maximise workshop efficiency Skills & Experience: Level 3 Motor Vehicle Mechanics City & Guilds/NVQ or equivalent. Previous experience as a qualified Fitter/Mechanic/Engineer Possession of own tools Anyone interested please apply below or contact Matt Staniforth at Questech Recruitment Questech Recruitment is a specialist engineering support within the road transport industry, our focus is to support many clients within the truck and bus sectors across the UK. If you feel you match the desired criteria, or you would like more information on roles such as Commercial Vehicle Technician, PSV Engineer, PSV Mechanic, LCV mechanic or Fitter, we would really like to hear from you.
Oct 01, 2025
Full time
Questech Automotive Recruitment are recruiting on behalf of one of the biggest Fleet Manufacturers in the World who are recruiting for experienced HGV Technicians on a permanent basis. We are looking for Technicians/mechanics from a Commercial, HGV, PSV or LGV background. The role will be working a 4 on 4 off rotation working 07:00 -19:00 week with an hourly rate of 21.00 per hour for the right candidates You will be an apprentice trained, fully qualified Technician that has experience working with a variety of LGV or HGV vehicles. The role: Electrical, mechanical and hydraulic fault diagnosis, repair and installation Setting and operating of machine tools and equipment Support workshops team members including Apprentice Technicians as required. Accurately record time to complete jobs and associated details Use of skills and performance of other work within normal grade/job skills as required by the Workshop Supervisor to maximise workshop efficiency Skills & Experience: Level 3 Motor Vehicle Mechanics City & Guilds/NVQ or equivalent. Previous experience as a qualified Fitter/Mechanic/Engineer Possession of own tools Anyone interested please apply below or contact Matt Staniforth at Questech Recruitment Questech Recruitment is a specialist engineering support within the road transport industry, our focus is to support many clients within the truck and bus sectors across the UK. If you feel you match the desired criteria, or you would like more information on roles such as Commercial Vehicle Technician, PSV Engineer, PSV Mechanic, LCV mechanic or Fitter, we would really like to hear from you.
Full time PSV Mechanic / Fitter required for maintenance of our coach and light commercial van fleet About Vans For Bands Vans for Bands (VFB) is a leading supplier of sleeper coaches and splitter vans to customers from across the music, comedy, events, theatre and TV production and sports industries. It is of vital importance that our fleet is maintained to the very highest standards as set by the company and the DVSA. We are a forward thinking employer who invests in our team through ongoing training and attention to maintaining a healthy work/ life balance. Job Overview You will be joining our mechanical maintenance team maintaining and repairing our sleeper coach and splitter van fleet in our purpose built workshops, located at our Begbroke site (OX5 1RG). Duties will include Carrying out vehicle servicing in accordance with company policy Carrying out Periodic Maintenance Inspections and repair to both company and DVSA standards Preparing and presenting for MOTs Diagnosing vehicle faults and specifying the correct method of repair and warranty claims are in line with terms Ensuring correct paperwork is completed and accurate records maintained in a timely manner Adhering to good housekeeping practices including general tidiness in the workshop and return of all tools and equipment to their designated place Attending on-road vehicle breakdowns Carrying out vehicle road testing where necessary to determine specific vehicle defects or following remedial repair Complying with Health and Safety policy and guidance documents Adopting methods of safe working Experience and qualities Level 3 NVQ in PSV or HGV maintenance, repair and diagnostics or equivalent Minimum 5 years industry experience of both mechanical and electrical systems PSV licence would also be desirable (but not essential) Welding experience would also be desirable. Have proven knowledge of the Health and Safety at Work Act Ability to work effectively unsupervised, use own initiative and remain focused and consistent and a 'can do' attitude Remuneration and hours Full time position / 40 - 45 paid hours per week excluding breaks Overtime will be available when required during busy periods Competitive rate of pay, in line with applicant's experience Further on-going training opportunities Job Type: Full-time Benefits: Company pension Schedule: Monday to Friday Work Location: In person Job Type: Full-time Pay: £35,000.00-£47,000.00 per year Benefits: Company pension Schedule: Monday to Friday Work Location: In person Reference ID: MechMay25
Sep 26, 2025
Full time
Full time PSV Mechanic / Fitter required for maintenance of our coach and light commercial van fleet About Vans For Bands Vans for Bands (VFB) is a leading supplier of sleeper coaches and splitter vans to customers from across the music, comedy, events, theatre and TV production and sports industries. It is of vital importance that our fleet is maintained to the very highest standards as set by the company and the DVSA. We are a forward thinking employer who invests in our team through ongoing training and attention to maintaining a healthy work/ life balance. Job Overview You will be joining our mechanical maintenance team maintaining and repairing our sleeper coach and splitter van fleet in our purpose built workshops, located at our Begbroke site (OX5 1RG). Duties will include Carrying out vehicle servicing in accordance with company policy Carrying out Periodic Maintenance Inspections and repair to both company and DVSA standards Preparing and presenting for MOTs Diagnosing vehicle faults and specifying the correct method of repair and warranty claims are in line with terms Ensuring correct paperwork is completed and accurate records maintained in a timely manner Adhering to good housekeeping practices including general tidiness in the workshop and return of all tools and equipment to their designated place Attending on-road vehicle breakdowns Carrying out vehicle road testing where necessary to determine specific vehicle defects or following remedial repair Complying with Health and Safety policy and guidance documents Adopting methods of safe working Experience and qualities Level 3 NVQ in PSV or HGV maintenance, repair and diagnostics or equivalent Minimum 5 years industry experience of both mechanical and electrical systems PSV licence would also be desirable (but not essential) Welding experience would also be desirable. Have proven knowledge of the Health and Safety at Work Act Ability to work effectively unsupervised, use own initiative and remain focused and consistent and a 'can do' attitude Remuneration and hours Full time position / 40 - 45 paid hours per week excluding breaks Overtime will be available when required during busy periods Competitive rate of pay, in line with applicant's experience Further on-going training opportunities Job Type: Full-time Benefits: Company pension Schedule: Monday to Friday Work Location: In person Job Type: Full-time Pay: £35,000.00-£47,000.00 per year Benefits: Company pension Schedule: Monday to Friday Work Location: In person Reference ID: MechMay25
Are you a fully qualified HGV Fitter/Mechanic/Technician living in the Stockport area looking for a workshop based role? Are you looking for a 4 on / 4 off Night shift role? 7pm 7am £52,000p/a plus overtime Permanent Full time position Would you work for a company that services, maintains and repairs their own fleet? The role of the HGV Technician: You will be working on a variety of tractor and trailer units of differing makes and models, of differing ages and possibly the odd tanker. You will be carrying out inspections to a varied and diverse fleet and you can expect to be situated in a positive and vibrant working environment. The type of work as an HGV Technician you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Electrical and wiring inspections and corrections Requirements for this HGV Technician position: Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC or an EV qualification would be desirable but not essential. Benefits, other than the usual, pension, sick pay, holidays etc there is also free, secure on site parking. HGV Technician Vacancy Night Shift Location: Stockport 4 on / 4 off, 7pm 7am, £52.000 plus overtime. Permanent, full time position Kautec Recruitment recruit for a variety of sectors and are actively seeking to recruit HGV Technicians, HGV Fitters, Mechanics, Mobile Technicians, PSV Technicians, Engineers for our Fleet Management Clients across the UK. So, what are you waiting for. Get in touch for further details and start that next journey on your career, we re just a click away , apply now with your CV.
Sep 23, 2025
Full time
Are you a fully qualified HGV Fitter/Mechanic/Technician living in the Stockport area looking for a workshop based role? Are you looking for a 4 on / 4 off Night shift role? 7pm 7am £52,000p/a plus overtime Permanent Full time position Would you work for a company that services, maintains and repairs their own fleet? The role of the HGV Technician: You will be working on a variety of tractor and trailer units of differing makes and models, of differing ages and possibly the odd tanker. You will be carrying out inspections to a varied and diverse fleet and you can expect to be situated in a positive and vibrant working environment. The type of work as an HGV Technician you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Electrical and wiring inspections and corrections Requirements for this HGV Technician position: Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC or an EV qualification would be desirable but not essential. Benefits, other than the usual, pension, sick pay, holidays etc there is also free, secure on site parking. HGV Technician Vacancy Night Shift Location: Stockport 4 on / 4 off, 7pm 7am, £52.000 plus overtime. Permanent, full time position Kautec Recruitment recruit for a variety of sectors and are actively seeking to recruit HGV Technicians, HGV Fitters, Mechanics, Mobile Technicians, PSV Technicians, Engineers for our Fleet Management Clients across the UK. So, what are you waiting for. Get in touch for further details and start that next journey on your career, we re just a click away , apply now with your CV.
