About the Role The company: Facility Monitoring Systems Ltd supplies, installs and supports specialist critical monitoring and alarm systems, associated instruments and equipment in the pharmaceutical, healthcare, automotive and industrial sectors. Job Purpose: To carry out the calibration, service and repair activities on environmental monitoring systems and equipment at FMSL customer sites and provide technical support for customers and internal staff. Key Responsibilities and Accountabilities: 1. To be responsible for the delivery of all technical aspects associated with current and ongoing service contracts 2. To carry out work at client sites, to service, test and calibrate environmental monitoring systems and components to prove accuracy of performance and continued effectiveness. 3. To complete all necessary documentation and reports on completion of testing, remedial and call out works and ensure that the client is in receipt of the required calibration certificates upon completion of the visit. 4. To carry out remedial repairs on environmental monitoring systems and components to rectify failures and non-conformances. 5. To diagnose and troubleshoot technical problems on environmental monitoring systems and components to take action to rectify failures and non-conformances. 6. Communicate and liaise verbally and in writing with customers/suppliers/visitors/enquirers and relevant staff and interpret and respond clearly and effectively to spoken requests over the phone or in person, and to verbal or written instructions. 7. Be a mentor to Technician Service Care. 8. Work with Engineer Integration and Install on the research and development of product and system hardware to ensure suitability for calibration and repair. Requirements An engineer service care usually performs many of the following tasks: 1. Meet with the customer, providing support and guidance as required 2. Calibration of particle counters and environmental sensors 3. Interrogation of the monitoring system software 4. Generate calibration certificates and service reports 5. Use Simpro, cloud-based operations management software for service management 6. Be involved in the updating of monitoring system records 7. Be involved with the scheduling of service work 8. Installation of repaired or replacement hardware 9. Perform health and safety assessment
Mar 17, 2026
Full time
About the Role The company: Facility Monitoring Systems Ltd supplies, installs and supports specialist critical monitoring and alarm systems, associated instruments and equipment in the pharmaceutical, healthcare, automotive and industrial sectors. Job Purpose: To carry out the calibration, service and repair activities on environmental monitoring systems and equipment at FMSL customer sites and provide technical support for customers and internal staff. Key Responsibilities and Accountabilities: 1. To be responsible for the delivery of all technical aspects associated with current and ongoing service contracts 2. To carry out work at client sites, to service, test and calibrate environmental monitoring systems and components to prove accuracy of performance and continued effectiveness. 3. To complete all necessary documentation and reports on completion of testing, remedial and call out works and ensure that the client is in receipt of the required calibration certificates upon completion of the visit. 4. To carry out remedial repairs on environmental monitoring systems and components to rectify failures and non-conformances. 5. To diagnose and troubleshoot technical problems on environmental monitoring systems and components to take action to rectify failures and non-conformances. 6. Communicate and liaise verbally and in writing with customers/suppliers/visitors/enquirers and relevant staff and interpret and respond clearly and effectively to spoken requests over the phone or in person, and to verbal or written instructions. 7. Be a mentor to Technician Service Care. 8. Work with Engineer Integration and Install on the research and development of product and system hardware to ensure suitability for calibration and repair. Requirements An engineer service care usually performs many of the following tasks: 1. Meet with the customer, providing support and guidance as required 2. Calibration of particle counters and environmental sensors 3. Interrogation of the monitoring system software 4. Generate calibration certificates and service reports 5. Use Simpro, cloud-based operations management software for service management 6. Be involved in the updating of monitoring system records 7. Be involved with the scheduling of service work 8. Installation of repaired or replacement hardware 9. Perform health and safety assessment
Are you or someone you know an experienced Calibration Engineer (RF/Electrical) looking for an exciting new opportunity? We are seeking highly motivated Calibration Engineers to join our teams, based in Yateley. Joining our team as a RF Calibration Engineer, you will be responsible for undertaking various calibrations both ISO9001/17025 accredited in accordance with Company Procedures, UKAS regulations, recognised specifications, etc. Calibrating measuring instrumentation to traceable and accredited standards. About the Role • Perform calibration of customer equipment using approved procedures and good Metrology practice. • Ensure all certificates and records are completed accurately; • Participate in UKAS and accreditation audits. • Handling technical enquiries and liaising with clients where necessary. • Produce, develop and audit automated and manual calibration procedures for use within the Laboratory for customer calibration. • Develop measurement uncertainty budgets for customer calibrations. • Provide technical support and mentoring to colleagues on request in line with capability. • The ability to understand & interpret specifications/technical drawings will be advantageous. • Calibration of general-purpose RF equipment, including Sensors, Power Meters, Signal Generators, Counters, Network Analysers etc Benefits Competitive salary Continuous development and training plan 25 days holiday and the option to buy/sell days Flexible working options Access to the Trescal PerksHub Employee well-being programme Medical Health Cash Plan Pension and Life Assurance Scheme Cycle to work scheme Gym membership discounts Requirements • Have previous experience as an RF Calibration Engineer. • Inspection or calibration experience in the manufacturing, aerospace or automotive sector. • Ideally technical qualification such as degree, HND or HNC. • Good understanding of calibration practices and theories. • Excellent knowledge of BS EN ISO/IEC 17025:2017.
Mar 16, 2026
Full time
Are you or someone you know an experienced Calibration Engineer (RF/Electrical) looking for an exciting new opportunity? We are seeking highly motivated Calibration Engineers to join our teams, based in Yateley. Joining our team as a RF Calibration Engineer, you will be responsible for undertaking various calibrations both ISO9001/17025 accredited in accordance with Company Procedures, UKAS regulations, recognised specifications, etc. Calibrating measuring instrumentation to traceable and accredited standards. About the Role • Perform calibration of customer equipment using approved procedures and good Metrology practice. • Ensure all certificates and records are completed accurately; • Participate in UKAS and accreditation audits. • Handling technical enquiries and liaising with clients where necessary. • Produce, develop and audit automated and manual calibration procedures for use within the Laboratory for customer calibration. • Develop measurement uncertainty budgets for customer calibrations. • Provide technical support and mentoring to colleagues on request in line with capability. • The ability to understand & interpret specifications/technical drawings will be advantageous. • Calibration of general-purpose RF equipment, including Sensors, Power Meters, Signal Generators, Counters, Network Analysers etc Benefits Competitive salary Continuous development and training plan 25 days holiday and the option to buy/sell days Flexible working options Access to the Trescal PerksHub Employee well-being programme Medical Health Cash Plan Pension and Life Assurance Scheme Cycle to work scheme Gym membership discounts Requirements • Have previous experience as an RF Calibration Engineer. • Inspection or calibration experience in the manufacturing, aerospace or automotive sector. • Ideally technical qualification such as degree, HND or HNC. • Good understanding of calibration practices and theories. • Excellent knowledge of BS EN ISO/IEC 17025:2017.
