Bilfinger UK is a leading engineering and maintenance provider, supporting customers across the chemical & petrochemical, nuclear, oil & gas, pharmaceuticals & biopharma, power & energy, utilities, renewables and food & beverage markets. We enhance the efficiency of assets, ensuring a high level of availability and reducing maintenance costs. We have extensive experience in offshore and onshore facilities; specialising in asset management services throughout all life cycle phases from consulting, engineering, manufacturing, assembly, operations, maintenance, and decommissioning. This commitment is delivered by an experienced and highly competent workforce of over 4,500 employees operating from 14 offices in strategic industrial hubs, upholding the highest standards of safety, compliance and quality. The Role To take a leading role managing the HSE Advisors within Gas Projects and providing HSE support and guidance to the Management Team to drive a positive safety culture. Reports directly to the Project Director, additionally working closely to support the Regional HSE Manager with the implementation of the company HSE strategy, improvements to the company Business Management System and processes. Act as a mentor and manage the Gas Projects HSE Advisors, Environmental & Sustainability Advisor while working closely with the Bilfinger Senior Project Managers, Project Managers and Construction Managers to ensure high standards and compliance with health, safety and environmental standards are implemented and maintained. Working closely with the Client HSE team to ensure high standards and compliance with health, safety and environmental standards are implemented and maintained. Key Activities Promote and improve safety performance and create a strong HSE culture within the company by: Participate in the development project / site HSE plans that meet with company business objective. Working in conjunction with the Project Operational Management, and the Regional HSE Manager Managing and developing stakeholder relationships concerning HSE matters Disseminating experience and knowledge to the site team Providing competent health and safety guidance and advice Conducting frequent site monitoring and auditing to ensure legal compliance in accordance with BUK policy and procedures Being an active visible member of the team spending time on site engaging and interacting with site personnel and Client representatives Working with the Project Operational Management to enable them to take ownership and deliver HSE 'through the line' Actively engaging with and advising Project Operational Management and Site Supervision on incident investigation and assisting the process through to satisfactory completion, closing the loop Driving safety culture, providing on-site informal coaching, safety interventions, toolbox talks and training and increasing hazards reported on-site Providing feedback to the workforce for all hazards identified on-site and maintaining open two-way communication Engaging with and developing relationships with Client HSE personnel and other contractors Working with and providing CDM advice and guidance to the Bilfinger Engineering Designers on CDM compliance requirements during FEED, Detailed Design and Pre-Construction and Construction Phase of projects Provide on-site HSE support during HSE Advisors holidays Work in conjunction with the Regional HSE Manager to: Provide support and deliver against Company targets and objectives Driving and maintaining site KPIs and safety control loop scores to ensure a positive reporting safety culture Promote the use of the company HSE Management System and identify any shortfalls or areas of improvement and report to the Regional HSE Manager Promote and support the Company Behavioural Safety Programme 'Safety Works' Report on concerns of non-compliance or potential non-adherence to legislation Identify and monitor issues, create new ideas and identify areas to drive improvements to: Products and services Health, safety and environmental performance Routine Duties: Provide support to the Project Operations Management to ensure all hazards associated with the site activities are identified and that risks to health, safety and the environment are assessed and that suitable control measures are implemented Ensure the Business Management System (BMS) is available to the working party, and all policies and procedures are adhered to Reviewing, amending and updating relevant safety documentation Ensure all accidents, incidents and near misses are being recorded within the 'Active' HSEQ reporting system, root cause analysis is completed and that suitable actions are assigned to mitigate future events occurring Disseminate HSE information to the site teams as directed by the HSE function on new regulations, practices and initiatives Give guidance and advice on matters relating to HSE systems and initiatives within Bilfinger UK Conduct HSE audits and inspections on-site Assist in developing, promoting and monitoring compliance with HSE performance indicators Develop and contribute towards the continual improvement of the HSE culture throughout the company Deliver on-site HSE training as required, provide inductions, safety briefings and toolbox talks as required Develop HSE Initiatives and support safety campaigns Provide guidance and support on HSE matters to on-site personnel and the Project Operational Management Ensure all HSE related concerns are reported and actively followed up with the Project Operational Management on site Collate comprehensive reports and develop presentations delivering safety information to Senior Leadership Team Attend Client meetings and manage HSE for site projects, supporting BUK management through transitions Ensure professional competencies are maintained Present safety information to the Client, leading and attending HSE meetings Share and promote safe working practices in accordance with the CDM Regulations. Skills & Experience Minimum 3 Years in a Senior Occupational Safety, Health and Environmental Role within the Construction or Oil & Gas Industry Inspection / Auditing Incident Management / Investigation, root cause analysis and report writing HSE Legislation & CDM Regulations Experience Management System Standards and improvement planning Competent in delivering training Essential NVQ 5 / NEBOSH Diploma (or equivalent) NEBOSH Construction Certificate NEBOSH Certificate in Environmental Management or equivalent Grad IOSH Status Preffered CMIOSH Status Internal Auditor (ISO 45001) Experience working within the Oil & Gas Industry If you wish to speak to a member of the recruitment team, please contact . Bilfinger UK Limited HSEQ Permanent Professional Bilfinger Office
Oct 26, 2025
Full time
Bilfinger UK is a leading engineering and maintenance provider, supporting customers across the chemical & petrochemical, nuclear, oil & gas, pharmaceuticals & biopharma, power & energy, utilities, renewables and food & beverage markets. We enhance the efficiency of assets, ensuring a high level of availability and reducing maintenance costs. We have extensive experience in offshore and onshore facilities; specialising in asset management services throughout all life cycle phases from consulting, engineering, manufacturing, assembly, operations, maintenance, and decommissioning. This commitment is delivered by an experienced and highly competent workforce of over 4,500 employees operating from 14 offices in strategic industrial hubs, upholding the highest standards of safety, compliance and quality. The Role To take a leading role managing the HSE Advisors within Gas Projects and providing HSE support and guidance to the Management Team to drive a positive safety culture. Reports directly to the Project Director, additionally working closely to support the Regional HSE Manager with the implementation of the company HSE strategy, improvements to the company Business Management System and processes. Act as a mentor and manage the Gas Projects HSE Advisors, Environmental & Sustainability Advisor while working closely with the Bilfinger Senior Project Managers, Project Managers and Construction Managers to ensure high standards and compliance with health, safety and environmental standards are implemented and maintained. Working closely with the Client HSE team to ensure high standards and compliance with health, safety and environmental standards are implemented and maintained. Key Activities Promote and improve safety performance and create a strong HSE culture within the company by: Participate in the development project / site HSE plans that meet with company business objective. Working in conjunction with the Project Operational Management, and the Regional HSE Manager Managing and developing stakeholder relationships concerning HSE matters Disseminating experience and knowledge to the site team Providing competent health and safety guidance and advice Conducting frequent site monitoring and auditing to ensure legal compliance in accordance with BUK policy and procedures Being an active visible member of the team spending time on site engaging and interacting with site personnel and Client representatives Working with the Project Operational Management to enable them to take ownership and deliver HSE 'through the line' Actively engaging with and advising Project Operational Management and Site Supervision on incident investigation and assisting the process through to satisfactory completion, closing the loop Driving safety culture, providing on-site informal coaching, safety interventions, toolbox talks and training and increasing hazards reported on-site Providing feedback to the workforce for all hazards identified on-site and maintaining open two-way communication Engaging with and developing relationships with Client HSE personnel and other contractors Working with and providing CDM advice and guidance to the Bilfinger Engineering Designers on CDM compliance requirements during FEED, Detailed Design and Pre-Construction and Construction Phase of projects Provide on-site HSE support during HSE Advisors holidays Work in conjunction with the Regional HSE Manager to: Provide support and deliver against Company targets and objectives Driving and maintaining site KPIs and safety control loop scores to ensure a positive reporting safety culture Promote the use of the company HSE Management System and identify any shortfalls or areas of improvement and report to the Regional HSE Manager Promote and support the Company Behavioural Safety Programme 'Safety Works' Report on concerns of non-compliance or potential non-adherence to legislation Identify and monitor issues, create new ideas and identify areas to drive improvements to: Products and services Health, safety and environmental performance Routine Duties: Provide support to the Project Operations Management to ensure all hazards associated with the site activities are identified and that risks to health, safety and the environment are assessed and that suitable control measures are implemented Ensure the Business Management System (BMS) is available to the working party, and all policies and procedures are adhered to Reviewing, amending and updating relevant safety documentation Ensure all accidents, incidents and near misses are being recorded within the 'Active' HSEQ reporting system, root cause analysis is completed and that suitable actions are assigned to mitigate future events occurring Disseminate HSE information to the site teams as directed by the HSE function on new regulations, practices and initiatives Give guidance and advice on matters relating to HSE systems and initiatives within Bilfinger UK Conduct HSE audits and inspections on-site Assist in developing, promoting and monitoring compliance with HSE performance indicators Develop and contribute towards the continual improvement of the HSE culture throughout the company Deliver on-site HSE training as required, provide inductions, safety briefings and toolbox talks as required Develop HSE Initiatives and support safety campaigns Provide guidance and support on HSE matters to on-site personnel and the Project Operational Management Ensure all HSE related concerns are reported and actively followed up with the Project Operational Management on site Collate comprehensive reports and develop presentations delivering safety information to Senior Leadership Team Attend Client meetings and manage HSE for site projects, supporting BUK management through transitions Ensure professional competencies are maintained Present safety information to the Client, leading and attending HSE meetings Share and promote safe working practices in accordance with the CDM Regulations. Skills & Experience Minimum 3 Years in a Senior Occupational Safety, Health and Environmental Role within the Construction or Oil & Gas Industry Inspection / Auditing Incident Management / Investigation, root cause analysis and report writing HSE Legislation & CDM Regulations Experience Management System Standards and improvement planning Competent in delivering training Essential NVQ 5 / NEBOSH Diploma (or equivalent) NEBOSH Construction Certificate NEBOSH Certificate in Environmental Management or equivalent Grad IOSH Status Preffered CMIOSH Status Internal Auditor (ISO 45001) Experience working within the Oil & Gas Industry If you wish to speak to a member of the recruitment team, please contact . Bilfinger UK Limited HSEQ Permanent Professional Bilfinger Office
Control Panel/Equipment Test Engineer Location: St. Helens Bilfinger UK is a leading engineering and maintenance provider, supporting customers across the chemical & petrochemical, nuclear, oil & gas, pharmaceuticals & biopharma, power & energy, utilities, renewables and food & beverage markets. We enhance the efficiency of assets, ensuring a high level of availability and reducing maintenance costs. We have extensive experience in offshore and onshore facilities; specialising in asset management services throughout all life cycle phases from consulting, engineering, manufacturing, assembly, operations, maintenance, and decommissioning. This commitment is delivered by an experienced and highly competent workforce of over 4,500 employees operating from 14 offices in strategic industrial hubs, upholding the highest standards of safety, compliance and quality. Main Responsibilities Inspection, Test and Commissioning of Electrical and Instrumentation panels / systems in house and on site if required. To carry out Inspection, Testing and Commissioning of Electrical and Instrumentation panels / systems in house and on site as required. To ensure all work is completed to specification and deadlines. To liaise with the customer on site to ensure completion of the works. To assist in the building and wiring of control panels when required. Attend sites to complete modifications to existing / new panels when required. Experience and Qualifications City & Guilds- 2391 Test & Inspection. City & Guilds th Edition. Time served electrician/instrument technician. Experience of testing industrial control panels, on site installation work, commissioning of systems, instrumentation and control panel wiring. Small bore pipe pressure testing. Knowledge and understanding of 3 phase systems, MCC control panels, PLC systems and schematics drawings. If you wish to speak to a member of the recruitment team, please contact . Electrical Bilfinger UK Limited Permanent Blue-collar workers (Monthly) Professional Engineering Bilfinger UK Limited Engineering Permanent Professional Bilfinger Engineering
Oct 26, 2025
Full time
Control Panel/Equipment Test Engineer Location: St. Helens Bilfinger UK is a leading engineering and maintenance provider, supporting customers across the chemical & petrochemical, nuclear, oil & gas, pharmaceuticals & biopharma, power & energy, utilities, renewables and food & beverage markets. We enhance the efficiency of assets, ensuring a high level of availability and reducing maintenance costs. We have extensive experience in offshore and onshore facilities; specialising in asset management services throughout all life cycle phases from consulting, engineering, manufacturing, assembly, operations, maintenance, and decommissioning. This commitment is delivered by an experienced and highly competent workforce of over 4,500 employees operating from 14 offices in strategic industrial hubs, upholding the highest standards of safety, compliance and quality. Main Responsibilities Inspection, Test and Commissioning of Electrical and Instrumentation panels / systems in house and on site if required. To carry out Inspection, Testing and Commissioning of Electrical and Instrumentation panels / systems in house and on site as required. To ensure all work is completed to specification and deadlines. To liaise with the customer on site to ensure completion of the works. To assist in the building and wiring of control panels when required. Attend sites to complete modifications to existing / new panels when required. Experience and Qualifications City & Guilds- 2391 Test & Inspection. City & Guilds th Edition. Time served electrician/instrument technician. Experience of testing industrial control panels, on site installation work, commissioning of systems, instrumentation and control panel wiring. Small bore pipe pressure testing. Knowledge and understanding of 3 phase systems, MCC control panels, PLC systems and schematics drawings. If you wish to speak to a member of the recruitment team, please contact . Electrical Bilfinger UK Limited Permanent Blue-collar workers (Monthly) Professional Engineering Bilfinger UK Limited Engineering Permanent Professional Bilfinger Engineering
Software Commissioning Test Team Leader (ICS) Location: Reading Bilfinger UK is a leading engineering and maintenance provider, supporting customers across the chemical & petrochemical, nuclear, oil & gas, pharmaceuticals & biopharma, power & energy, utilities, renewables and food & beverage markets. We enhance the efficiency of assets, ensuring a high level of availability and reducing maintenance costs. We have extensive experience in offshore and onshore facilities; specialising in asset management services throughout all life cycle phases from consulting, engineering, manufacturing, assembly, operations, maintenance, and decommissioning. This commitment is delivered by an experienced and highly competent workforce of over 4,500 employees operating from 14 offices in strategic industrial hubs, upholding the highest standards of safety, compliance and quality. Software Commissioning Test Team Leader Role & Responsibilities Supervise onsite commissioning activities to ensure safe, compliant and accurate testing is achieved. Review Commissioning documentation and Safe System of Work for suitability of the activity. Ensure the commissioning document and Safe System of Work is followed by all involved in the activity. Work to an approved commissioning procedure, an approved Safe System of Work and co-ordination with other working parties including attending site planning meetings. Seek approval, apply, record, monitor & remove the application of Temporary Commissioning Aid's. Raise commissioning reservations and seek guidance from the commissioning manager or engineering support, when a system does not operate as expected or defects are found during the commissioning stage. In the event of uncertainty, the TTL is to halt the commissioning activity, brief those involved why, and seek guidance from the commissioning manager or engineering support. In the event of an incident resulting in harm to personnel or damage to equipment the TTL is to control the situation and make safe to prevent further injury, damage or loss. The TTL must then preserve the seen for investigation and withdraw all personnel. Ensure the final state of plant configuration (post commissioning) is as expected in the commissioning document or agreed with the commissioning manager. Skills & Qualifications Hands on experience of Siemens PLC and SCADA systems A good appreciation of Control panels, electrical installation and Instrumentation solutions Experience of testing and on-site commissioning is essential Excellent H&S awareness - SSSTS or SMSTS preferred CSCS card or equivalent - essential Experience of some or all of the following is desirable: Plant Historians Network design and configuration Cyber Security Functional Safety Industrial Protocol Knowledge (IEC 61850, DNP3, Modbus, OPC etc) If you wish to speak to a member of the recruitment team, please contact . Operations Bilfinger UK Limited Temporary White-collar workers Skilled / Semi-skilled Engineering Bilfinger UK Limited Engineering Temporary Skilled / Semi-skilled Bilfinger Engineering
Oct 26, 2025
Full time
Software Commissioning Test Team Leader (ICS) Location: Reading Bilfinger UK is a leading engineering and maintenance provider, supporting customers across the chemical & petrochemical, nuclear, oil & gas, pharmaceuticals & biopharma, power & energy, utilities, renewables and food & beverage markets. We enhance the efficiency of assets, ensuring a high level of availability and reducing maintenance costs. We have extensive experience in offshore and onshore facilities; specialising in asset management services throughout all life cycle phases from consulting, engineering, manufacturing, assembly, operations, maintenance, and decommissioning. This commitment is delivered by an experienced and highly competent workforce of over 4,500 employees operating from 14 offices in strategic industrial hubs, upholding the highest standards of safety, compliance and quality. Software Commissioning Test Team Leader Role & Responsibilities Supervise onsite commissioning activities to ensure safe, compliant and accurate testing is achieved. Review Commissioning documentation and Safe System of Work for suitability of the activity. Ensure the commissioning document and Safe System of Work is followed by all involved in the activity. Work to an approved commissioning procedure, an approved Safe System of Work and co-ordination with other working parties including attending site planning meetings. Seek approval, apply, record, monitor & remove the application of Temporary Commissioning Aid's. Raise commissioning reservations and seek guidance from the commissioning manager or engineering support, when a system does not operate as expected or defects are found during the commissioning stage. In the event of uncertainty, the TTL is to halt the commissioning activity, brief those involved why, and seek guidance from the commissioning manager or engineering support. In the event of an incident resulting in harm to personnel or damage to equipment the TTL is to control the situation and make safe to prevent further injury, damage or loss. The TTL must then preserve the seen for investigation and withdraw all personnel. Ensure the final state of plant configuration (post commissioning) is as expected in the commissioning document or agreed with the commissioning manager. Skills & Qualifications Hands on experience of Siemens PLC and SCADA systems A good appreciation of Control panels, electrical installation and Instrumentation solutions Experience of testing and on-site commissioning is essential Excellent H&S awareness - SSSTS or SMSTS preferred CSCS card or equivalent - essential Experience of some or all of the following is desirable: Plant Historians Network design and configuration Cyber Security Functional Safety Industrial Protocol Knowledge (IEC 61850, DNP3, Modbus, OPC etc) If you wish to speak to a member of the recruitment team, please contact . Operations Bilfinger UK Limited Temporary White-collar workers Skilled / Semi-skilled Engineering Bilfinger UK Limited Engineering Temporary Skilled / Semi-skilled Bilfinger Engineering
Senior Systems Engineer - NGT Location: Warrington Bilfinger UK is a leading engineering and maintenance provider, supporting customers across the chemical & petrochemical, nuclear, oil & gas, pharmaceuticals & biopharma, power & energy, utilities, renewables and food & beverage markets. We enhance the efficiency of assets, ensuring a high level of availability and reducing maintenance costs. We have extensive experience in offshore and onshore facilities; specialising in asset management services throughout all life cycle phases from consulting, engineering, manufacturing, assembly, operations, maintenance, and decommissioning. This commitment is delivered by an experienced and highly competent workforce of over 4,500 employees operating from 14 offices in strategic industrial hubs, upholding the highest standards of safety, compliance and quality. The Role: A Senior Systems Engineer is required to be a committed and enthusiastic member of the team, taking full responsibility for successful technical delivery of a complete project solution to the agreed scope in accordance with company procedures whilst meeting budgetary and time-scale targets. Must be proactive and able to allocate tasks among team members and supervise, assist and monitor task progress and advise the project manager on progress, risks and issues. The Senior Engineer should work co-operatively with the Project Manager and engineering team to ensure smooth project progress in accordance with the agreed project lifecycle. Main Responsibilities: Responsible for the technical delivery of projects Work closely with and support the Project Manager in all aspects of project technical delivery and scope management Allocate tasks to the engineering team and monitor progress Responsible for meeting the technical and quality requirements of projects Ensure project adherence to company quality processes and procedures Identify project opportunities and variations Support the Project Manager in identifying and managing risks and issues Identify and enable use of reusable modules by standardisation and modularization of systems where appropriate Prototyping of new technologies Training planning and support Mentoring of Engineers Support the Automation sales and proposals teams Support department business development Provide Health and Safety leadership by example Main Functions: The Senior Engineer is normally expected to undertake the following: Involvement in sales to projects hand-over process Involvement in 1st Engineering review Assist PM in development of QA plan Assist PM in development of project Gantt chart Assist PM in development of initial task & procurement list Ongoing development & updating of detailed task & procurement lists Peer review documents created by the project team or other teams Attend contract meetings with the project manager as required Undertake site surveys as required Undertake outline design, upfront design studies and requirement definition for clients Develop FDS Develop DDS Develop test specification & design testing methodology Develop project modules. (Modules as identified in the design - PLC code modules, SCADA scripts, Mimics, comms drivers, etc.) Develop site work documentation with team input as necessary (Risk assessment, method statement, site test documentation) Develop O & M documentation Undertake full integrated system testing, CFAT, SAT and installation Undertake observations, variation and reworks Undertake packing and shipping of the system Undertake site installation Undertake site retesting Provide warranty support as necessary Experience & Qualifications: A minimum 5 years' experience of developing integrated control system solutions. The following experience is essential: Detailed experience of the full project life cycle from system specification through design, development, testing and on-site commissioning is essential Hands on experience of PLC and SCADA systems (Rockwell, Siemens, Schneider, AVEVA etc) A good appreciation of Control panels, electrical installation and Instrumentation solutions. A Degree or HND/HNC in Electrical / Electronic Engineering, Control Systems or relevant discipline Chartered Engineer status or working towards professional registration Experience of some or all of the following is desirable: Cyber Security Functional Safety Fire & Gas Systems eg Detronics DCS Drives Plant Historians MES Industry 4.0 IOT and Edge Computing (NodeRed, MQTT etc) IT/OT Convergence Network design and configuration Database implementation Batch & Recipe Systems Energy Efficiency and OEE Industrial Protocol Knowledge (IEC 61850, DNP3, Modbus, OPC etc) Bespoke code development If you wish to speak to a member of the recruitment team, please contact . Engineering & Consultancy Bilfinger UK Limited Temporary White-collar workers Graduates Engineering Bilfinger UK Limited Engineering Temporary Graduates Bilfinger Careerstart
Oct 26, 2025
Full time
Senior Systems Engineer - NGT Location: Warrington Bilfinger UK is a leading engineering and maintenance provider, supporting customers across the chemical & petrochemical, nuclear, oil & gas, pharmaceuticals & biopharma, power & energy, utilities, renewables and food & beverage markets. We enhance the efficiency of assets, ensuring a high level of availability and reducing maintenance costs. We have extensive experience in offshore and onshore facilities; specialising in asset management services throughout all life cycle phases from consulting, engineering, manufacturing, assembly, operations, maintenance, and decommissioning. This commitment is delivered by an experienced and highly competent workforce of over 4,500 employees operating from 14 offices in strategic industrial hubs, upholding the highest standards of safety, compliance and quality. The Role: A Senior Systems Engineer is required to be a committed and enthusiastic member of the team, taking full responsibility for successful technical delivery of a complete project solution to the agreed scope in accordance with company procedures whilst meeting budgetary and time-scale targets. Must be proactive and able to allocate tasks among team members and supervise, assist and monitor task progress and advise the project manager on progress, risks and issues. The Senior Engineer should work co-operatively with the Project Manager and engineering team to ensure smooth project progress in accordance with the agreed project lifecycle. Main Responsibilities: Responsible for the technical delivery of projects Work closely with and support the Project Manager in all aspects of project technical delivery and scope management Allocate tasks to the engineering team and monitor progress Responsible for meeting the technical and quality requirements of projects Ensure project adherence to company quality processes and procedures Identify project opportunities and variations Support the Project Manager in identifying and managing risks and issues Identify and enable use of reusable modules by standardisation and modularization of systems where appropriate Prototyping of new technologies Training planning and support Mentoring of Engineers Support the Automation sales and proposals teams Support department business development Provide Health and Safety leadership by example Main Functions: The Senior Engineer is normally expected to undertake the following: Involvement in sales to projects hand-over process Involvement in 1st Engineering review Assist PM in development of QA plan Assist PM in development of project Gantt chart Assist PM in development of initial task & procurement list Ongoing development & updating of detailed task & procurement lists Peer review documents created by the project team or other teams Attend contract meetings with the project manager as required Undertake site surveys as required Undertake outline design, upfront design studies and requirement definition for clients Develop FDS Develop DDS Develop test specification & design testing methodology Develop project modules. (Modules as identified in the design - PLC code modules, SCADA scripts, Mimics, comms drivers, etc.) Develop site work documentation with team input as necessary (Risk assessment, method statement, site test documentation) Develop O & M documentation Undertake full integrated system testing, CFAT, SAT and installation Undertake observations, variation and reworks Undertake packing and shipping of the system Undertake site installation Undertake site retesting Provide warranty support as necessary Experience & Qualifications: A minimum 5 years' experience of developing integrated control system solutions. The following experience is essential: Detailed experience of the full project life cycle from system specification through design, development, testing and on-site commissioning is essential Hands on experience of PLC and SCADA systems (Rockwell, Siemens, Schneider, AVEVA etc) A good appreciation of Control panels, electrical installation and Instrumentation solutions. A Degree or HND/HNC in Electrical / Electronic Engineering, Control Systems or relevant discipline Chartered Engineer status or working towards professional registration Experience of some or all of the following is desirable: Cyber Security Functional Safety Fire & Gas Systems eg Detronics DCS Drives Plant Historians MES Industry 4.0 IOT and Edge Computing (NodeRed, MQTT etc) IT/OT Convergence Network design and configuration Database implementation Batch & Recipe Systems Energy Efficiency and OEE Industrial Protocol Knowledge (IEC 61850, DNP3, Modbus, OPC etc) Bespoke code development If you wish to speak to a member of the recruitment team, please contact . Engineering & Consultancy Bilfinger UK Limited Temporary White-collar workers Graduates Engineering Bilfinger UK Limited Engineering Temporary Graduates Bilfinger Careerstart
Bilfinger UK is a leading engineering and maintenance provider, supporting customers across the chemical & petrochemical, nuclear, oil & gas, pharmaceuticals & biopharma, power & energy, utilities, renewables and food & beverage markets. We enhance the efficiency of assets, ensuring a high level of availability and reducing maintenance costs. We have extensive experience in offshore and onshore facilities; specialising in asset management services throughout all life cycle phases from consulting, engineering, manufacturing, assembly, operations, maintenance, and decommissioning. This commitment is delivered by an experienced and highly competent workforce of over 4,500 employees operating from 14 offices in strategic industrial hubs, upholding the highest standards of safety, compliance and quality. Mechanical Fitter required for a Client Embedded position at DSM Dalry. • Carrying out maintenance tasks focussed on breakdown and recovery maintenance. • Understanding the scope and safety issues relating to allocated work. • Carrying out defined work in accordance with dsm-firmenich SHEQ requirements. • Signing off the RAPTW and initiate a handover of the equipment to • production. • Recording relevant job history. • Entering an accurate time recording for the job. This is a fixed term contract until end of 2025 embedded to our client DSM-Firmenich. Torquing experience Rotating equipment experience MJI10 desirable, but not essential If you wish to speak to a member of the recruitment team, please contact . Bilfinger UK Limited Engineering Temporary Skilled / Semi-skilled Bilfinger Engineering
Oct 26, 2025
Full time
Bilfinger UK is a leading engineering and maintenance provider, supporting customers across the chemical & petrochemical, nuclear, oil & gas, pharmaceuticals & biopharma, power & energy, utilities, renewables and food & beverage markets. We enhance the efficiency of assets, ensuring a high level of availability and reducing maintenance costs. We have extensive experience in offshore and onshore facilities; specialising in asset management services throughout all life cycle phases from consulting, engineering, manufacturing, assembly, operations, maintenance, and decommissioning. This commitment is delivered by an experienced and highly competent workforce of over 4,500 employees operating from 14 offices in strategic industrial hubs, upholding the highest standards of safety, compliance and quality. Mechanical Fitter required for a Client Embedded position at DSM Dalry. • Carrying out maintenance tasks focussed on breakdown and recovery maintenance. • Understanding the scope and safety issues relating to allocated work. • Carrying out defined work in accordance with dsm-firmenich SHEQ requirements. • Signing off the RAPTW and initiate a handover of the equipment to • production. • Recording relevant job history. • Entering an accurate time recording for the job. This is a fixed term contract until end of 2025 embedded to our client DSM-Firmenich. Torquing experience Rotating equipment experience MJI10 desirable, but not essential If you wish to speak to a member of the recruitment team, please contact . Bilfinger UK Limited Engineering Temporary Skilled / Semi-skilled Bilfinger Engineering
