Verify Europe

We are currently looking for a First Article Inspector for a 6 month contract based in Brockworth, Gloucester. Key Responsibilities: Perform First Article Inspections (FAI) : Conduct dimensional and visual inspections of propeller assemblies and components using precision measurement tools click apply for full job details

Currently seeking two experienced CMM Programmer / Quality Inspectors to support a temporary project on-site at a customer facility in Gloucestershire. The support will involve programming and operating Mitutoyo CMM machines using MCOSMOS software and/or Aberlink CMM machines. Where there are no no existing CMM programmes, candidates will use their experience and be competent in creating programmes click apply for full job details

Seeking a Defence Senior Procurement Specialist Engineering full-time (37.5 hours per week) for 3 months+ near Milton Keynes, England. Flexible working options, including 4-day week. This activity is inside IR35 and candidates will be required to work via an Umbrella Company. Job Summary: Focussing on managing supplier delivery, primarily supporting development and production in Armoured Vehicles, Platform Integration, Special Projects and Weapons areas & domains to meet domestic and international programme and business needs. Through a worldwide supply base, although predominantly in the UK, Europe, the Middle East and the US. Success requires experience of working in a functional organisation and a blend of proven skills including relationship building and achievement of deliveries on time and in full, through the ability to successfully negotiate and manage procurements, ranging from simple to complex subcontracts. This will be coupled with effectively working within a multi-disciplinary product team including Engineering, Operations and Quality. The role focusses on supporting a variety of programmes and undertakes activity across multiple categories of goods and services including simple to complex build to print in commodity areas including PCB's, box-builds, cable harnesses, mechanical, COTs and MOTs. Job Responsibility Own and manage strategic, critical, and tactical supplier relationships to achieve best value and identifying and managing supply chain risks Lead end-to-end sourcing and procurement activities for a range of engineered products, including tenders, RFQs, offer evaluation, negotiation, and contract award. Monitor and manage supplier performance to meet Schedule, Quality, Cost and Technical requirements, implementing corrective actions and improvement plans as required. Act as the primary interface between suppliers and internal customers, ensuring effective communication and issue resolution. Exercise delegated procurement authority, managing supplier agreements and purchase orders in line with governance requirements. Developing and maintaining strong stakeholder relationships, managing expectations, and influencing outcomes at multiple organisational levels Supporting bids, proposals, and review activities by providing supply chain input as required Driving continuous improvement within procurement and the wider supply chain. Knowledge, Skills and Abilities Experience procuring complex drawn items (Mechanical Assemblies, PCB-A, Box Build and Cable Harnesses). Ability to successfully manage multiple Strategic, Critical and Tactical supplier relationships to overcome complex schedule and cost challenges. Excellent communication skills with the ability to effectively manage stakeholder expectations at a variety of levels. Capable of identifying and mitigating risks by implementing effective mitigation strategies. Excellent commercial skills with the ability to analyse and negotiate best-value agreements. Proven track record of adhering to procurement procedures and processes, ensuring compliance, accuracy, and timely execution of all procurement activities Able to complete work under general direction, independently determining and developing approaches to solutions. Be an advocate of and has demonstrated the ability to deliver continuous improvement. Additional Requirements: Must be a UK National (due to program security restrictions) Ideally holds UK Government Security Clearance Supply chain experience in the defence environment. Experience leading or supporting Bids and proposals. CIPS

We are currently looking for a First Article Inspector for a 6 month contract based in Brockworth, Gloucester. Key Responsibilities: Perform First Article Inspections (FAI) : Conduct dimensional and visual inspections of propeller assemblies and components using precision measurement tools. Verify compliance with engineering drawings, technical specifications, and customer requirements. Responsibilities/Requirements: Previous experience in FAIR review / sign-off Working knowledge of AS9102 Specification Relative commodity experience (mechanical is priority) Inspection techniques Reading drawings writing Root Cause and Corrective Action Request Understanding of AS9100, ISO 9001 and AS9102 Standards Documentation and Reporting : Prepare and maintain detailed inspection reports in accordance with AS9102 FAI documentation. Ensure proper traceability of materials and components. Identify, document & address non-conformances, collaborating with engineering and manufacturing teams. Logging daily hours and activities for weekly submission. Raise and monitor non-conformances in relation to FAI, may contribute to root cause analysis and corrective action. Collaboration and Communication : Work closely with quality peers, engineering, manufacturing, and supply chain teams to address quality concerns. Support daily management of FAI progress, providing escalation where necessary to meet production deliverables. Continuous Improvement : Identify opportunities to improve FAI processes & any concerns regarding compliance to FAI requirements. Skills Required Technical Proficiency : Proficient in reading and interpreting engineering drawings, and technical specifications. Skilled in the use of precision measurement tools. Proficient in GD&T (Geometric Dimensioning and Tolerancing). Attention to Detail : Strong ability to identify defects and non-conformances. Meticulous documentation and record-keeping skills. Problem-Solving Skills : Ability to analyse and resolve quality issues effectively. Experience with root cause analysis and corrective action processes. Communication Skills : Excellent verbal and written communication skills. Ability to collaborate with cross-functional teams and suppliers. Certifications ASQ Certified Quality Inspector (CQI) or equivalent, preferred. Training in AS9102 FAI documentation. Work Environment Work may involve exposure to manufacturing environments, including noise, dust, and machinery. Requires daily interactions with multiple functions. Additional Requirements Must be eligible to work in the United Kingdom. Ability to obtain and maintain necessary security clearances, including ITAR. Willingness to work flexible hours, including overtime, as needed Role is inside IR35

Currently seeking two experienced CMM Programmer / Quality Inspectors to support a temporary project on-site at a customer facility in Gloucestershire. The support will involve programming and operating Mitutoyo CMM machines using MCOSMOS software and/or Aberlink CMM machines. Where there are no no existing CMM programmes, candidates will use their experience and be competent in creating programmes from engineering drawings, setting up components and completing dimensional inspection activities independently. The support will include: Interpret engineering drawings, tolerances and dimensional inspection requirements. Create, prove out and run CMM programmes using Mitutoyo MCOSMOS or Aberlink software. Set up and inspect components using CMM equipment, including completing manual measurements where required. Complete part and assembly measurement in support of First Article Inspection and production inspection requirements. Accurately record inspection measurements and produce clear inspection results and reports. Use MahrSurf, Contracer or similar profile and contour measurement equipment. Use non-contact measurement systems, shadowgraphs and a range of conventional handheld metrology equipment. Identify and record any non-conformances, detailing the drawing requirement, actual measurement and relevant supporting specifications. Ensure robust inspection practices and techniques are employed efficiently across all customer products. Experience requirements: Proven experience working as a CMM Programmer, CMM Inspector or Dimensional Inspector within an engineering or manufacturing environment. Competent in programming, setting and operating either Mitutoyo CMM equipment using MCOSMOS software or Aberlink CMM equipment. Able to create CMM programmes from scratch, as opposed to solely operating existing programmes. Demonstrate strong knowledge of interpreting engineering drawings, geometric dimensioning and tolerancing. Competent in using handheld inspection instruments and conventional metrology equipment. Experience using MahrSurf, Contracer or similar profile measurement equipment. Experience completing First Article Inspections and compiling FAIR documentation would be advantageous. Demonstrate excellent attention to detail. Customer and results focused. This role is inside IR35.

Receiving Inspection 6 month Contract Role Job Description: The Recieving inspector will perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection accept / reject information . Requirements: Candidate must have practical experience performing Goods-in inspection on complex machined parts, assemblies, and / or sub-assemblies. The inspections will be performed to engineering requirements specified per ANSI Y14.5 - Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. Experience performing

Our Aerospace customer is looking for an experienced Configuration Engineer. Contract role - Duration: 3 months Location: Prestwick Pay rate: 28 p/h 37 hours p/w Job Overview Develops and implements configuration management systems, processes and procedures designed to provide technical direction and administrative control over the documentation and data management throughout the project lifecycle. Ensures the identification and traceability of product configurations, physical and functional, through all phases of each product's life cycle. Provides oversight on the change management system to assure the capture of any modifications to product requirements & designs, and that all changes are properly documented and the status is topical. Serves as the company facilitator and trainer in the implementation of new systems/processes and enabling tools for configuration control/change management, configuration status accounting, and configuration audits. Collaborates with QA regarding compliance management to ensure Spirit meet International Organization for Standardization (ISO), regulatory and customer requirements for configuration management. Responsibilities Facilitates the programme to perform configuration management planning and ensure that the configuration management plan is topical to current working practices, contractual and regulatory requirements. Establishes and monitors configuration management metrics to support product quality, integrity and quality assurance systems. Promote awareness of customer and regulatory requirements for configuration management within projects and facilitate adherence to these utilising appropriate measures and remedial actions to encourage the correct behaviours. Define review and continuously improve Configuration Management (CM) processes and procedures. Stay current on emerging technologies and trends in CM. to implement enhanced and innovative processes. Develops the documentation/data management toolsets and processes for the approval and control of product data. Serves as principal controller of the program design change process including base-lining documentation and data. Management of engineering change orders and other forms of modifications to product requirements or designs. Ensure the generation of the proper configuration status accounting records, archiving and version control for product and documentation releases and traceability. Defines requirements for the coordination, execution and documentation of internal, supplier and customer configuration audits. Qualifications & Experience 2 years work experience in applying discipline knowledge A basic competence and understanding in the use of the company toolsets for PDM, ERP & design. A broad knowledge of the business processes and the dependencies and interactions required to ensure that the correct engineering definition is specified, assembled and verified. Proficient in the use of the Microsoft Office suite of applications and software packages. Knowledge and understanding of Company Procedures and standards relating to engineering, design, health, safety and environment. The ability to assess configuration changes for its overall impact and make judgements on the likely impacts on design, cost, manufacturing, lead times etc. Has an in-depth knowledge of the companies procedures especially as they relate to change control, data control and communication of data to suppliers and customers, part identification and traceability, status accounting and auditing. Has an in-depth knowledge of industry requirements AS9100, ISO1007 and customer requirements as related to configuration management.

Manufacturing Engineer Pay Rate: 35 p/h Outside IR35 Job Description: Seeking a Manufacturing Engineer to be based on-site supporting a customer program in Prestwick. The desired candidate will have a proven track record in Manufacturing Engineering roles, within an aerospace or defence manufacturing facility. The role will be accountable for the management and development of accurate Bills of Materials (BOM) maintained within the Enterprise Resource Planning System. Ensure that valid Engineering Processes are deployed within the manufacturing process and effectively detailed within the process routing to satisfy requirements of the business MRPII disciplines. Additionally, the role will manage the formal Engineering Changes communicated and agreed with the customer and valid agreed internal changes, as well as deploy the Continuous Improvement toolset to enable productivity and product quality improvements to be implemented in support of business and customer requirements both internal and within the supply chain. The role also supports and take the lead on the Translation of Design Data (for example CAD/CATIA) and specifications into clear and concise work instructions for manufacturing products to customer and regulatory authority requirements. The primary responsibilities include: Responsible for the translation of Design Engineering data and specifications into clear and concise work instructions for manufacturing assemblies or product to customer and regulatory authority requirements. Accountable for the maintenance and development of suppliers/conditions of supply. Responsible for supporting Continuous Improvement to achieve significant productivity and quality improvements by: Analysing and eliminating waste (seven wastes). Developing and implementing production smoothing methods and Kanban systems. Identifying and implementing methods to reduce set-up and overall cycle times. Effective use of problem solving tools and techniques. Responsible for the definition of hard to satisfy quality standards and optimise long term manufacturing costs. Responsible for manipulating CAD data to support work activities when required. Support the MRB process by providing engineering instructions relating to rework, scrap and future prevention of non-conforming products. Implement visible control and business support systems in order to demonstrate effective management and control. Liaising with operators, design and regulatory authorities to ensure product integrity and compliance. Responsible for checking and acceptance of new and modified design models and drawings as approved signatories. Responsible for provision of engineering/manufacturing support to external customers and contractors. Responsible for the creation, maintenance and auditing of Engineering processes. Assisting with product audits, identifying and implementing corrective actions. Assisting with the close out of customer non-conformances. Work closely with Design to identify and implement cost reduction initiatives and quality improvements. The right candidate will have the following background and experience: Preferably be qualified to HNC level or equivalent in a related discipline. Have 2 years relevant engineering experience within a Manufacturing Engineering environment. Good communication skills - interface with customers and suppliers. Knowledge of engineering systems and the ability to deploy the Continuous Improvement Toolset - Seven Wastes etc. Awareness of drawings and systems as applied within our major customers such as Boeing and Airbus. A good working knowledge of Microsoft Packages - Word, PowerPoint, Excel and Access.

Quality Inspector As-Required 27.50 P/H Inside IR35 Job Description: Urgently seeking Quality Inspectors to provide on-demand / as-required support on a customer programme in Derby. Support will typically be requested with one week's notice and will run for periods of 2-3 weeks at a time. The desired candidates will have previous experience working in an Aerospace Inspection role, performing inspections to engineering drawings, customer purchase orders, industry standards, and specifications. Supporting the final inspection process, support will include: Visual inspection Dimensional inspection, using hand measurement equipment Review completeness of manufacturing documentation (e.g. CofCs, routers, etc.) Document inspection, preparing non-conformance reports as necessary Update customer systems Experience requirements: Demonstrate evidence of more than 2-years in the last 5-years of aerospace experience and poses experience of working within an engineering environment for a minimum of 3 years. Demonstrate knowledge of interpreting engineering drawings Demonstrate knowledge of geometric, dimensioning and tolerance Demonstrate evidence of product specific knowledge and experience in fabricated parts, which are welded and rivited Knowledge / experience of AS9100 and AS9102 standards highly advantageous Strong communications skills, both written and verbal Additional Requirements: To ensure access to technical data, we seek EU Nationals / Passport holders only. This activity is inside IR35 (Umbrella Company Required)

We are currently looking for a Electromechanical Source Inspector fo an ongoin contrsact based in Wolverhampton. Key Responsibilities: Perform documentation, visual, and dimensional inspections a cross a broad range of aerospace commodities, including: Mechanical assemblies and sub-assemblies Complex CCAs and electronic assemblies Precision-machined components Sheet metal parts, castings, and forgings V click apply for full job details