Jark PLC

Jark Cambridge require a Lagger for an immediate start in Epping. You will require a valid CSCS/Skills card for this role. Commercial install, installing thermal insulation materials (mineral wool, foam, foil, etc.) around ductwork for HVAC systems. Requirements: Previous experience as a lagger, ideally with ductwork insulation. Knowledge of insulation materials, methods, and installation techniques. Free parking on site Skills Required lagging Qualifications Required CSCS LEVEL 2 NVQ Keywords lagger essex epping

My Client, a boutique hotel in Worcestershire, is looking to recruit a Head Chef on a Permanent basis They are looking for a chef with experience of working with fresh produce and a very busy working environment, a team player with a level head. The Hotel is traditionally busier in the summer months and a quieter winter, you will have the opportunity to create daily specials using fresh local ingredients where possible as well as working from a seasonal A La Carte menu. The salary on offer is up to 40,000 Keywords Head Chef, Executive Chef, Gastro Pub, Rossette

My client, a specialist in HGV Automotive repairs, is looking to recruit a Warranty Repair Engineer on a permanent basis. The main focus of this role is to carry out Warranty Repairs on hydraulic, pneumatics, mechanical and electrical systems where you would be required to visit clients premises to carry out on-site repairs. You will provide technical expertise, diagnose faults and ensure vehicles are safe and roadworthy The main duties associated with the role include - Carry out field based repairs on HGV's - Diagnose faults quickly and accurately - Perform inspections in line with manufactures standards - Conduct visual inspections, adjustments, testing, stripping, fitting and replacing components - Provide exceptional customer services As a suitable candidate you will offer the following - Flexibility to travel at short notice and long distances when required - Commercial Vehicles Technician experience - Mechanical background with knowledge of Hydraulics, Pneumatics and electrical systems - Experience of working with HGV's - Ideally hold a Class 1 License but not essential The positon is based on a 40 hour a week contract with overtime available, the pay-rate is up to 20 an hour Keywords Commercial Vehicles, HGV's, Hydraulics, Pneumatics, Electrical Systems, Warranty Engineers, Automotive repairs,

My Client, a boutique hotel in Worcestershire, is looking to recruit a Head Chef on a Permanent basisThey are looking for a chef with experience of working with fresh produce and a very busy working environment, a team player with a level head. The Hotel is traditionally busier in the summer months and a quieter winter, you will have the opportunity to create daily specials using fresh local ingredients where possible as well as working from a seasonal A La Carte menu. The salary on offer is up to £40,000

We are seeking a skilled Stone Saw Operative to join our team based in Normanton, West Yorkshire. Working on a weekend shift Friday / Saturday / Sunday (Apply online only)hrs. Training however will be on standard day shift (Apply online only) Monday to Friday. The ideal candidate would ideally have experience in operating stone-cutting machinery or similar processes, ensuring precision and quality in the production of stone products. Responsibilities Operate stone-cutting machinery to shape and cut stone materials according to specifications. Ensure the proper setup and calibration of machines for optimal performance. Inspect finished products for quality and accuracy. Follow safety protocols and guidelines to prevent accidents and injuries. Perform routine maintenance on machinery to keep it in good working condition. Rate of Pay 21.49phr + 28 days holiday - Overtime % Apply today for interviews Skills Required Saw Sawman Cutter CNC Qualifications Required Saw Sawman Cutter CNC Keywords Saw Sawman Cutter CNC

My client in the Shafton area of Barnsley are looking for Industrial Electricians. Candidates must have a high level of technical expertise, problem-solving skills, and the ability to work independently or as part of a team. Duties of the Role Install electrical systems in an industrial setting. Conduct electrical inspections and testing to ensure compliance with regulations. Read and interpret technical drawings, wiring diagrams, and specifications. Ensure all work adheres to BS 7671 Wiring Regulations and other relevant standards. Maintain accurate records of work completed, including reports and certifications. Adhere to health and safety regulations, ensuring a safe working environment. Collaborate with clients, contractors, and other professionals to complete projects effectively. Experience Required City & Guilds Level 3 Electrical Installation or equivalent qualification. 2391 Inspection, Testing, and Certification (or equivalent). ECS Gold Card (preferred). Minimum 5 years of experience as an electrician. Strong knowledge of electrical regulations and safety standards. Ability to work independently and manage projects efficiently. Excellent problem-solving and communication skills. Working Hours (7am - 4.30pm) and (7am - 13pm) on Friday IND123

My client in the Shafton area of Barnsley are looking for x 3 skilled Welder / Fitter / Fabricator. Candidates must be able to read and interpreting engineering 2D & 3D drawings, fabricating & welding metal components or structures, and performing quality checks on finished products. Duties of the Role. Reading and interpreting engineering 2D & 3D Drawings. Measuring and marking out cutting and bending lines. Ensuring that all required parts for assembly are present. Double-checking design specifications before commencing with work. Fabricating and constructing metal components. Grinding and finishing completed products. Performing quality checks on completed products. Conforming with company Health & Safety regulations. Completing quality check sheets. Experience Required Previous work experience as a metal fabricator welder. Previously experience working with mild steel, Zintec & galvanised sheet. Ranging from 0.9mm to 30mm. Previous experience working with mild steel 2mm to 10mm Proficiency in operating an overhead crane is an advantage. Welding experience/certification is an advantage. Advanced knowledge of engineering design and manufacturing procedures. Ability to read and interpret engineering 2D & 3D Drawings. Proficiency with metal fabrication tools. Advanced mathematical and engineering skills. Ability to lift and manipulate large metal objects. Ability to stand for long periods. Working Days IND123

My client, a food company based in Tewkesbury is looking to recruit a Field Sales Executive on a Permanent basis The main requirements of the role include - Promote doorstep deliveries to potential customers - Represent the company to promote brand awareness and products - mange objections by engaging with customers from initial contact and building rapport - Work towards weekly targets with potential for unlimited commission - Travel to targeted locations a part of your workday As a suitable candidate you will offer the following - Previous sales experience - Full Clean UK Driving License - A DBS check will be required - Confident with your communication skills - Self-motivated, be able to work independently You will have access to a pool car/van and you typical working week would be Mon-Fri from (Apply online only) The basic salary on offer is between 28 and 330,000 with unlimited commission available Keywords Sales, Field Sales, Commission, DBS, canvassing, doorstep

My client based near Hereford is looking to recruit a Transport Planner on a Permanent basis. You will support the Transport Manager in the day-to-day functions of running the Transport Operation, stepping into the Managers role when he is off-site. The main responsibilities of the role include - Manage the drivers hours and duties - Manage deliveries, timesheets, expenses and bonus calculations - Manage drive records including training, CPC and other relevant paperwork - Keep accurate records of vehicle maintenance and ensure all legislation is adhered to at all times - Manage all breakdown in a timely and efficient manner As a suitable candidates you will offer the following - previous experience in a similar role - Ideally hold a CPC license - A strong personality who is able to manage different personalities across the transport team - Methodical and diligent with your paperwork - Good IT skills This role is Mon-Fri and the salary on offer is up to 40,000 Keywords CPC. HGV. Transport Supervisor, assistant transport manager, backloads, transport office

My client in the Castleford area require an experienced CNC Press Brake Operative. Duties of the Role: To set up and operate press brake machinery to bend and form mild steel and aluminium components according to engineering drawings and production specifications. Key Responsibilities: Set up and operate press brake machines to bend sheet metal accurately. Interpret engineering drawings and technical instructions. Ensure finished components meet specified tolerances and quality standards. Conduct regular machine maintenance and safety checks. Monitor stock levels of tooling and materials. Work efficiently to meet production targets and deadlines. Ensure a safe and clean working environment at all times. Requirements: Proven experience operating press brake machinery. Ability to read and interpret engineering drawings. Knowledge of fabrication and sheet metal processes. Strong attention to detail and quality control. Basic understanding of health and safety practices in a fabrication setting. Workings Days / Afters Overtime available IND123

My client, an engineering company based in Gloucester (GL1) is looking to recruit a CNC Miller/Turner on a permanent basis. The main requirements for the role include - Proven experience as a CNC Turner/Miller - Ability to set intricate parts for milling - Flexible and adaptable to be able to complete all tasks with accuracy, and within fine tolerances - Proactive nature and keen to work within a small business and take responsible for the role - Experience with Fanuc/Siemens/XYZ Protract - Experience of precision components is highly desirable This role is based on a 39 hour week, up to 17 an hour and their is overtime available Keywords CNC, Miller, Turner, Fanuc, Siemens, XYZ Protract,

My client in the Castleford area require Machinists / Saw Operatives. The ideal candidate would ideally have experience in operating stone-cutting machinery or similar processes, ensuring precision and quality in the production of stone products. Responsibilities Operate CNC stone-cutting machinery to shape and cut stone materials according to specifications. Ensure the proper setup and calibration of machines for optimal performance. Inspect finished products for quality and accuracy. Follow safety protocols and guidelines to prevent accidents and injuries. Perform routine maintenance on machinery to keep it in good working condition. Qualifications Proven experience as a CNC Machine Operative or similar role preferable. Ability to read and interpret technical drawings and specifications. Strong attention to detail and precision in work. Knowledge of safety procedures and guidelines in a manufacturing environment. Physical stamina and dexterity for prolonged periods of machinery operation. Requirements Experience: Experience in stone cutting or related field Skills: Stone cutting, Machinery operation, Technical drawing interpretation, Quality inspection, Safety protocols Work Hours: (Days / Nights) Hours of work 6.30am - 1530pm(Monday to Friday) / Moving onto 6am - 6pm(Friday to Sun) IND123

My client in the Killamarsh area looking for Vehicle Body Builders. The client specialise in both building and repairing commercial bodies, but we also offer a diverse range of services including: metal fabrication, general body repairs, accident damage and paintwork, vehicle electrics and so much more. We work with various materials, such as: steel, aluminium, plastic composites, wood and GRP products, utilising skills including: drilling, welding, grinding, folding and cutting of materials. Duties include: Building, repairing and modifying commercial vehicle bodies. Fabrication and welding. Completing appropriate paperwork associated with job including time records. Using various tools and machinery. Preparing vehicles for painting. Repairing minor dents, scratches, and other imperfections on vehicle surfaces. Skills Required: Previous experience in body/coach building or commercial paint prep is essential, with ideally a minimum of 3 years of experience. Knowledge and experience in metal fabrication and welding, vehicle electrics, paint & repair, CNC plasma cutting and a forklift certificate would be a distinct advantage. Good time keeping and ability to work to build time frames. Awareness of and adherence to all housekeeping and Health and Safety Regulations. The completion of paperwork associated with jobs and time records is essential. Ability to work as a team or independently. Ability to paint would be an advantage. Knowledge of hydraulic systems would be an advantage, but not essential. Verbal communication. Numeracy skills. Full UK driving licence. HGV licence would be an advantage, but not essential. Ability to work from technical drawings. Working Days (Overtime available) IND123

My client, an Engineering company based in Worcester is looking to recruit an FPI Technician on a permanent basisThe main responsibilities associated with the role include - Perform maintenance and process checks- Perform pre and post cleaning of components- Process parts through FPI line- Interpret and evaluate results- Report om the results of FPI tests- Operate Air Flow testing equipmentAs a suitable candidates you will offer the following- previous experience of PT Level 2 experience, certified to EN4179 or NAS410- Experience of penetrative testing and inspection- Experience in FPI of metal components- Ability to read and comprehend specifications and techniques- Ideal experience within the Aerospace or Automotive sectors- Ideally have experience of Air-Flow testing equipmentIts for an a PM shift is Mon-Thurs and Friday with 20% shift allowance on top of the basic salaryof up to £35,000