Pertemps Redditch Industrial

The client are an established designer and manufacturer of bespoke test systems and applications for the automotive industry. They are seeking to recruit an Installations and Commissioning Engineer for their busy operations in Worcester. Salary on the role is up to 48k per annum. The role is Monday to Thursday 8.30am to 5pm and then Friday 8.30am to 1pm. Key responsibility of the role The Installation and Commissioning Engineer is responsible for the on-site installation, testing, commissioning and handover of systems and equipment to ensure they meet design specifications, safety standards, and customer requirements. The role involves close collaboration with project managers, design teams, and clients to deliver projects on time and to a high standard of quality. Responsibilities and duties Install, configure, and commission equipment and systems according to engineering drawings, specifications, and project plans Perform pre-commissioning checks, functional testing, and performance verification Diagnose, troubleshoot, and resolve technical issues during installation and commissioning Ensure all work complies with health, safety, environmental, and quality standards Liaise with customers, contractors, and internal teams during site activities Produce commissioning reports, test documentation, and as-built records Provide technical support and training to customers and operators as required Participate in factory acceptance tests (FAT) and site acceptance tests (SAT) Support system upgrades, modifications, and corrective maintenance when needed Travel to customer sites as required, including occasional international travel Experience and knowledge required Proven experience in installation, commissioning, or field engineering roles Strong understanding of electrical/mechanical systems, controls, and instrumentation Knowledge of engine test and component test related equipment Understanding of PLC software and troubleshooting using diagnostics tools (Siemens S7 preferable) Integrating control technology into mechanical assemblies Calibration of instruments Fluid systems of solid and flexible pipes and fittings including- fuel systems, petrol and diesel, water systems for engine systems, oil systems, pressure testing and lead detection, filtration, flow, temperature and pressure testing Pneumatics systems knowledge (hard piping, flexible hoses and plastic tubing) Able to read technical engineering drawings Able to travel nationally and internationally to client sites Clean driving license Good time management and organisational abilities Expenses to be paid by the company, a phone, a laptop and a car provided. Free parking available on site at headquarters in Worcester, training and progression opportunities to be provided The role is based in Worcester so would be commutable from Droitwich, Redditch, Bromsgrove, Kidderminster, Alcester, Birmingham, Solihull, Tewkesbury, Evesham

The company are a leading manufacturer of components to the aerospace industry. They are seeking an experienced CMM Operator to join their precision engineering team. You will be responsible for ensuring that all high-precision components meet stringent quality standards and engineering specifications using advanced metrology equipment click apply for full job details

The company are an established and leading manufacturer of precision components and assemblies to the aerospace industry. Pertemps are working on their behalf to recruit a Laboratory Manager for their operations in Redditch. Salary - 42,000 to 52,000 per annum. The role is days (Monday to Friday). Main Responsibilities Responsible for the scheduling and testing or work in progress. Training, certification and management of lab technicians. Maintaining calibration of the test equipment and ensuring NADCAP MTL requirements are adhered to. Liaise with quality, logistics, manufacturing and engineering teams. Skills and experience required Previous lab experience. Experience in managing a team. Experience in mechanical testing. Able to work to very tight tolerances. Knowledge of NADCAP Qualification in Metallurgy, Metallurgical Engineering or Material Science (Advantageous not essential) Able to interpret industry standards for test requirements. The company offers a modern, friendly working environment, onsite parking, social company events and progression opportunities. The company are based in the Redditch area so is commutable from Birmingham, Bromsgrove, Solihull, Studley, Alcester, Droitwich. The role is being advertised on behalf of Pertemps who operate as a recruitment agency.

The client are a leading global manufacturer of paints and coatings. They are recruiting for a Maintenance Operative to join their team in Redditch. The successful candidate will be responsible for ensuring the sites building and production machinery is inspected, maintained and kept in good order. Key responsibilities and duties; Carry out planned preventative maintenance (PPM) and reactive mechanical maintenance across the site Repair of pneumatic systems, pumps, mixers and filling lines, particularly those used in paint/chemical processing. Build, modify and install machinery to correct specifications. Repair of tanks, vessels and other mechanical plant infrastructure. Complete building site maintenance checks. Liaise with external contractors and suppliers to oversee planned and emergency works. Ensure all maintenance works and tasks are logged correctly. Contribute to the companies health and safety culture, performing risk assessments and promoting a safe working environment. Skills and experience required; Minimum 3 years of working in a maintenance role. Strong mechanical and electrical skills. Good diagnostic and problem solving skills. Able to carry loads and physically fit. A valid driving license. Computer literate. The role is on Days and is Monday to Friday. This is an excellent opportunity for an Manufacturing Engineer or Maintenance Operative looking to apply their expertise, in a dynamic and high-quality manufacturing environment. The role is based in Redditch so is easily commutable from Birmingham, Worcester, Bromsgrove, Solihull, Alcester, Dudley, Droitwich, West Bromwich, Kidderminster, Wolverhampton, Walsall. To be considered for this role, click 'Apply' today, and follow the instruction!

Metal Polisher Redditch 0600 to 1600, Monday to Thursday 14.00 per hour Opportunity for a Metal Polisher to join a Redditch based manufacturer. Working in a state-of-the-art manufacturing facility on day shifts, working a 4-day week! The Role: Removing surface defects on machined product Operating a pedestal grinder and polisher Achieve high standard surface finishes Demonstrate good manual handling practise To be successful in this role you will have experience within a Manufacturing environment, Metal Polishing advantageous. To be considered for this role please click the 'Apply' button.

The company is an established and leading manufacturer of products and systems to various industries such as defence, rail, automotive and marine. They are seeking to recruit a Service & Warranty Technician for their operations in Redditch. Salary - 12.77 per hour. Hours of work are; Monday to Thursday 7.30am to 4.30pm and Friday 7.30am to 1.30pm Benefits include, private medical insurance, employee discounts, staff social events, free parking. The main responsibility of the role is to assist in the maintenance, repair and overhaul of products and applications that the company manufacture. Responsibilities and duties are as follows; Booking in and out of related product, using SAP system and RMA process. Carry out mechanical and electrical repair, refurbishments and overhaul of returned product. Inspect returned product, identify faults and troubleshoot issues. Dealing with customer returns and providing customer support. Liaise with quality team on finding from product issues. From time to time provide on-site support. Experience and qualifications for the role are as follows; Experience in manufacturing is preferred Some electrical and mechanical knowledge Knowledge of reading and understanding technical drawings Computer literate - knowledge of SAP Strong interpersonal skills The company are based in Redditch so is commutable from Birmingham, Bromsgrove, Alcester, Solihull, Worcester, Droitwich, Dudley, Stratford upon Avon, Evesham. Please apply now to be considered for the vacancy!

The client is an established and successful manufacturer test machinery and equipment. Due to success and growth they are seeking to recruit a Commissioning & Automation Engineer for their operations in Worcester. Salary - £35,000 to £45,000 per annum. Benefits of working with the company are as follows; Generous holiday entitlement, pension, staff social events, free onsite parking Hours of work are click apply for full job details

Sheet Metal Worker Alcester, Warwickshire (B49) Late Shift Mon-Wed 4.30pm 2.30am,Thursday 4.30pm 1.30am 15.62 per hour Permanent Opportunity for an experienced Fabrications Sheet Metal Worker to join a growing Alcester based Manufacturing business. The role: Fabrication and sheet metal work using air tools, hand tools, spot-welding Setting up machines & Tooling Working to job cards, drawings and inspection plans Carrying out in-process inspections and ensuring work is right first time What we're looking for: Experience within an engineering or manufacturing environment Strong attention to detail with good problem-solving skills Positive, reliable and a strong team player What you'll get: Competitive, benchmarked pay + employee bonus scheme Length of service awards & recognition programmes Continuous training, development & mentoring Access to Employee Assistance Programme (EAP) & wellbeing resources Discounts club - high street vouchers, cycle to work & gym discounts Family-friendly policies including parental leave & flexible working To be considered for this role, click 'APPLY' and follow the instructions!

Junior Welder Redditch 27k starting salary 07:00 to 15;15, Mon to Fri Do you have a passion for Engineering and looking for a career as a skilled Welder? Some Welding experience but want an opportunity to progress your skills and become coded? Permanent opportunity to join a growing business that values their staff. This role Is open to candidates who have been exposed to an Engineering, Fabrication or Welding environment and want to progress skills. Essential Requirements: MIG welding skills Some fabrication skills Able to use power and hand tools effectively Desire to learn Ability to work as an individual and as a team Looking for a permanent & long-term career opportunity This role is at a Redditch based Manufacturer, and a starting salary of 27k. The salary will increase, reflecting the skill level and progress with training / coding. To be considered for this role please click 'APPLY' and follow the instructions.