Morson Technical Services are currently seeking a QA2 Controller to join the team at RNAS Yeovilton on a permanent basis. JOB PURPOSE QA2 Controller. Required to conduct the QA2 process on all 1 Regt Army Air Corps (AAC) aircraft, Survival Equipment (SE), Armourer and Role Equipment (RE) documentation. Utilise additional capacity to support the MilAR programme where possible. MAIN ACTIVITIES AND TASKS Carry out maintenance documentation audits on 100% of 1 Regt AAC maintenance documentation (MF700 series documentation), including Survival Equipment, Armourer and Role Equipment areas. Recording and recovering where necessary, all QA2 (AMDA) activity associated with 1 Regt AAC maintenance documentation i.a.w. current Military Regulatory Policy, including Regulatory Articles and Army Wildcat Aviation Engineering Standing Orders (AESOs), 1 Regt AAC Workshop s quality plan and other relevant policies, ensuring all failings and documentation errors are identified in a timely manner. Trend QA2/AMDA observations, conduct data analysis and reduce errors through feedback to Workshop Managers and the engineering team. Where appropriate, propose rectification programmes ensuring any opportunity for improvement maintains the airworthiness process and drives continuous improvement. Ensure completion of all technical documentation prior to safe storage by the Information Knowledge Manager (aka Technical Librarian). When technical documentation is deficient, regulatory process is to be adhered to. Attend routine QA meetings and provide Subject Matter Expert (SME) input and conduct additional QA and provide additional support to the Quality Team as agreed by the QSO or QSM. Take an active role in Air Safety Information Management System (ASIMS) investigations as directed by the Quality System Owner (QSO), Quality System Manager (QSM), Quality System Coordinator (QSC) or FIND Air Safety Team. Complete QA reports and returns in accordance with Army Wildcat AESOs including Self Audits of processes relevant to their role, creating written audit reports detailing objective evidence of sampled information viewed during audit. Ensure any non-conformances, opportunities for improvement and observations identified during audits are recorded with an action plan generated towards recovery. Advising the Quality System Owner (QSO), Quality System Manager (QSM), Quality System Coordinator (QSC) or FIND Air Safety Team on emergent quality issues and deviations from standards affecting documentation. Identifying any Continuous Improvement opportunity which maintains Airworthiness through the documentation process. Utilise any spare capacity to manage MilAR rectification and completion of Section 10 of the MilAR report. Ensuring safe custody of all aircraft documents in their care. This includes liaison with the MilAR team to manage timely conduct of audits in order to reduce time lost though the MilAR process. Co-ordination of the MilAR Report (MF792) conducting the recovery action of all documentation observations with objective evidence to confirm that the airworthiness of the aircraft is maintained, prior to presentation to the management team. KNOWLEDGE SKILLS AND EXPERIENCE Preferably Military Service Trade Training to SNCO level including 3rd signature authorisation (E507), or equivalent Engineering Apprenticeship / civilian status with a thorough understanding of Military Aviation Practices. Exposure to and awareness of Military QA Procedures. Experience as ISO 9001:2015 Quality Auditor. Experience of MAA MRP Part 145 process. Understanding and awareness of MAOS. Experience of GOLDesp to 3rd signature (MAMP-E507) level. Wildcat training (provided if not already held) to Engineering Managers Course Level. Excellent interpersonal skills and a confident, effective approach to personal communications. Demonstrate initiative, enthusiasm and diligence whilst maintaining a tenacious commitment to high Quality Standards. Ability to communicate ideas and concepts to senior management, customers and staff in a clear and concise manner, using both verbal and visual formats.
Oct 09, 2025
Full time
Morson Technical Services are currently seeking a QA2 Controller to join the team at RNAS Yeovilton on a permanent basis. JOB PURPOSE QA2 Controller. Required to conduct the QA2 process on all 1 Regt Army Air Corps (AAC) aircraft, Survival Equipment (SE), Armourer and Role Equipment (RE) documentation. Utilise additional capacity to support the MilAR programme where possible. MAIN ACTIVITIES AND TASKS Carry out maintenance documentation audits on 100% of 1 Regt AAC maintenance documentation (MF700 series documentation), including Survival Equipment, Armourer and Role Equipment areas. Recording and recovering where necessary, all QA2 (AMDA) activity associated with 1 Regt AAC maintenance documentation i.a.w. current Military Regulatory Policy, including Regulatory Articles and Army Wildcat Aviation Engineering Standing Orders (AESOs), 1 Regt AAC Workshop s quality plan and other relevant policies, ensuring all failings and documentation errors are identified in a timely manner. Trend QA2/AMDA observations, conduct data analysis and reduce errors through feedback to Workshop Managers and the engineering team. Where appropriate, propose rectification programmes ensuring any opportunity for improvement maintains the airworthiness process and drives continuous improvement. Ensure completion of all technical documentation prior to safe storage by the Information Knowledge Manager (aka Technical Librarian). When technical documentation is deficient, regulatory process is to be adhered to. Attend routine QA meetings and provide Subject Matter Expert (SME) input and conduct additional QA and provide additional support to the Quality Team as agreed by the QSO or QSM. Take an active role in Air Safety Information Management System (ASIMS) investigations as directed by the Quality System Owner (QSO), Quality System Manager (QSM), Quality System Coordinator (QSC) or FIND Air Safety Team. Complete QA reports and returns in accordance with Army Wildcat AESOs including Self Audits of processes relevant to their role, creating written audit reports detailing objective evidence of sampled information viewed during audit. Ensure any non-conformances, opportunities for improvement and observations identified during audits are recorded with an action plan generated towards recovery. Advising the Quality System Owner (QSO), Quality System Manager (QSM), Quality System Coordinator (QSC) or FIND Air Safety Team on emergent quality issues and deviations from standards affecting documentation. Identifying any Continuous Improvement opportunity which maintains Airworthiness through the documentation process. Utilise any spare capacity to manage MilAR rectification and completion of Section 10 of the MilAR report. Ensuring safe custody of all aircraft documents in their care. This includes liaison with the MilAR team to manage timely conduct of audits in order to reduce time lost though the MilAR process. Co-ordination of the MilAR Report (MF792) conducting the recovery action of all documentation observations with objective evidence to confirm that the airworthiness of the aircraft is maintained, prior to presentation to the management team. KNOWLEDGE SKILLS AND EXPERIENCE Preferably Military Service Trade Training to SNCO level including 3rd signature authorisation (E507), or equivalent Engineering Apprenticeship / civilian status with a thorough understanding of Military Aviation Practices. Exposure to and awareness of Military QA Procedures. Experience as ISO 9001:2015 Quality Auditor. Experience of MAA MRP Part 145 process. Understanding and awareness of MAOS. Experience of GOLDesp to 3rd signature (MAMP-E507) level. Wildcat training (provided if not already held) to Engineering Managers Course Level. Excellent interpersonal skills and a confident, effective approach to personal communications. Demonstrate initiative, enthusiasm and diligence whilst maintaining a tenacious commitment to high Quality Standards. Ability to communicate ideas and concepts to senior management, customers and staff in a clear and concise manner, using both verbal and visual formats.
Overview Expleo is a trusted partner for end-to-end, integrated engineering, quality services and management consulting for digital transformation. We help businesses harness unrelenting technological change to successfully deliver innovations that will help them gain a competitive advantage and improve the everyday lives of people around the globe. We are seeking a highly organised and motivated Senior Design Assurance Engineer with experience of Design Assurance activities leading to Aircraft Certification for an aircraft modification program of works being delivered by Expleo on behalf of our client Responsibilities Updating plans and process framework to address comments from certification authorities and ensure compliance with ARP4754A, CMS-DASA-002 and PCRI DA. Creation of templates, checklists and other materials used in the Development Assurance (DA) process. Creation, development and implementation of the Modification Impact Analysis process (ARP4754B Section 6), including detailed procedures, checklists, and templates. Regression analysis as part of the verification strategy. Strategy for reuse or modification of systems and equipment from other certified aircraft types. Evaluation of supplier activities. Integration of E(TSO) articles into the aircraft systems. Consideration of highly complex and integrated systems, with a focus on integration aspects. Providing training and support the implementation of Development Assurance (DA) processes within the company. Supporting PDT teams in adhering to the defined processes, offering clarification and guidance in day-to-day activities Supporting to CVE Panel 10 activities, including preparation for EASA P10 Meetings, Document Reviews, Pre- DAA, 2, 3,4 audits at aircraft, system and equipment level Qualifications Degree or HNC/HND or equivalent in Mechanical or Aerospace Engineering Applications are also welcomed from individuals with significant demonstrable experience who don't hold formal qualifications Essential skills Pro-active engineers with a theoretical and practical engineering background. Have a proven track record of successful design assurance and verification activities within the aerospace industry. Engineering expertise across the engineering lifecycle V-Model or equivalent from initial concepts, requirements, design, implementation, integration, verification, Work collaboratively with the product and functional specialisms to deliver a cohesive solution for the client Desired skills Innovation and Problem Solving - to be able to analyse situations and identify solutions to problems or opportunities for improvement. Two Way Communication - to be highly competent at both written and verbal communication Drive and Commitment - to work persistently to overcome obstacles and deliver results Customer Focus - to recognise customer needs and react accordingly Teamwork - able to participate as an effective team member Tech doc creation/proof reading experience Familiarity with standard office software packages Experience DOA experience Airworthiness experience of CAA requirements for some (or all) of the following ATA chapters, 27,28, 29, 36, 53, 54, 57, 60 ,61, 71 and 72 EASA Panel 10 Verification activities Benefits Collaborative working environment - we stand shoulder to shoulder with our clients and our peers through good times and challenges We empower all passionate technology loving professionals by allowing them to expand their skills and take part in inspiring projects Expleo Academy - enables you to acquire and develop the right skills by delivering a suite of accredited training courses Competitive company benefits Always working as one team, our people are not afraid to think big and challenge the status quo As a Disability Confident Committed Employer we have committed to: Ensure our recruitment process is inclusive and accessible Communicating and promoting vacancies Offering an interview to disabled people who meet the minimum criteria for the job Anticipating and providing reasonable adjustments as required Supporting any existing employee who acquires a disability or long term health condition, enabling them to stay in work at least one activity that will make a difference for disabled people "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age". We treat everyone fairly and equitably across the organisation, including providing any additional support and adjustments needed for everyone to thrive
Oct 08, 2025
Full time
Overview Expleo is a trusted partner for end-to-end, integrated engineering, quality services and management consulting for digital transformation. We help businesses harness unrelenting technological change to successfully deliver innovations that will help them gain a competitive advantage and improve the everyday lives of people around the globe. We are seeking a highly organised and motivated Senior Design Assurance Engineer with experience of Design Assurance activities leading to Aircraft Certification for an aircraft modification program of works being delivered by Expleo on behalf of our client Responsibilities Updating plans and process framework to address comments from certification authorities and ensure compliance with ARP4754A, CMS-DASA-002 and PCRI DA. Creation of templates, checklists and other materials used in the Development Assurance (DA) process. Creation, development and implementation of the Modification Impact Analysis process (ARP4754B Section 6), including detailed procedures, checklists, and templates. Regression analysis as part of the verification strategy. Strategy for reuse or modification of systems and equipment from other certified aircraft types. Evaluation of supplier activities. Integration of E(TSO) articles into the aircraft systems. Consideration of highly complex and integrated systems, with a focus on integration aspects. Providing training and support the implementation of Development Assurance (DA) processes within the company. Supporting PDT teams in adhering to the defined processes, offering clarification and guidance in day-to-day activities Supporting to CVE Panel 10 activities, including preparation for EASA P10 Meetings, Document Reviews, Pre- DAA, 2, 3,4 audits at aircraft, system and equipment level Qualifications Degree or HNC/HND or equivalent in Mechanical or Aerospace Engineering Applications are also welcomed from individuals with significant demonstrable experience who don't hold formal qualifications Essential skills Pro-active engineers with a theoretical and practical engineering background. Have a proven track record of successful design assurance and verification activities within the aerospace industry. Engineering expertise across the engineering lifecycle V-Model or equivalent from initial concepts, requirements, design, implementation, integration, verification, Work collaboratively with the product and functional specialisms to deliver a cohesive solution for the client Desired skills Innovation and Problem Solving - to be able to analyse situations and identify solutions to problems or opportunities for improvement. Two Way Communication - to be highly competent at both written and verbal communication Drive and Commitment - to work persistently to overcome obstacles and deliver results Customer Focus - to recognise customer needs and react accordingly Teamwork - able to participate as an effective team member Tech doc creation/proof reading experience Familiarity with standard office software packages Experience DOA experience Airworthiness experience of CAA requirements for some (or all) of the following ATA chapters, 27,28, 29, 36, 53, 54, 57, 60 ,61, 71 and 72 EASA Panel 10 Verification activities Benefits Collaborative working environment - we stand shoulder to shoulder with our clients and our peers through good times and challenges We empower all passionate technology loving professionals by allowing them to expand their skills and take part in inspiring projects Expleo Academy - enables you to acquire and develop the right skills by delivering a suite of accredited training courses Competitive company benefits Always working as one team, our people are not afraid to think big and challenge the status quo As a Disability Confident Committed Employer we have committed to: Ensure our recruitment process is inclusive and accessible Communicating and promoting vacancies Offering an interview to disabled people who meet the minimum criteria for the job Anticipating and providing reasonable adjustments as required Supporting any existing employee who acquires a disability or long term health condition, enabling them to stay in work at least one activity that will make a difference for disabled people "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age". We treat everyone fairly and equitably across the organisation, including providing any additional support and adjustments needed for everyone to thrive
Aircraft Engineering Supervisors (Wildcat) (Mechanical and Avionics) RNAS Yeovilton, Yeovil BA22 8HT Competitive salary plus benefits 38 hours /40 hours or 45 hours per week contracts available/ Monday- Friday Are you looking to develop a career in Aviation supporting the Royal Navy? Do you have hands on Aircraft experience, if so we would love to hear from you. Serco are proud to support the Fleet Air Arm, including the Wildcat Maritime Force (WMF) based at Royal Naval Air Station Yeovilton, delivering services ranging from the repair and maintenance of military aircraft- to fuel delivery and off aircraft support services. Yeovilton is one of the Royal Navy s two principal air stations, is one of the busiest military airfields in the UK and home to more than 100 aircraft. Serco have some exciting opportunities for Aircraft Engineering Supervisors (Any Trade) (Wildcat) to be based at our site at RNAS Yeovilton located in Somerset. This role is responsible for the aircraft management and ground support to our Wildcat aircrafts. Our Aircraft Engineering Supervisors carry out contracted tasks ensuring customer policy and regulations are met to a high standard, whilst ensuring any customer complaints or quality issues and business risks are raised with Team leads. Within this role, our Aircraft Fitters will comply with The Health and Safety at Work (HASAW) Act 1974 and Customer Policy and Regulations. You will be responsible for completing any administration duties required to the role and be willing to attend further training courses to develop your skills and knowledge in the role. We offer this position as either 40 or 45 hours per week, working Monday- Friday, plus an option to undertake shift work, with additional shift pay. What you'll need to do the role: Minimum of 6 years working in an airworthiness environment, relevant experience for the Wildcat aircraft, with a minimum of 2 years hands on experience Hold/have ability to hold Certificate of Competency for Supervisory level Attained formal training in the Wildcat aircraft and associated trade systems. Previous experience and a good working knowledge of the following: Wildcat Aircraft Engineering and Aircraft Systems (by Trade). Wildcat Aircraft Servicing and Support Equipment. Hold a certificate of Competency at Supervisor level An understanding of Lean Operating Procedures. An understanding of Naval Air Publications and Compound - Interactive Electronic Technical Publications (C-IETP). Adhere to Health and Safety, the Control of Substances Hazardous to Health (COSHH) Regulations, Tool Control and Quality Practices. An understanding of Engineering and Asset Management Systems. Completed or able to complete Maintenance Human Factors Course. Understand rotary wing military (aviation) procedures. An understanding of Airworthiness Engineering Safety and Compliance iaw Regulatory and Legislative requirements (MAA). A capability to work productively, efficiently & effectively with initiative and drive under tight timescales and pressure whilst maintaining operational outputs. Ability to achieve SC clearance What we offer: Salary: Competitive salaries with annual reviews Pension: Up to 6% contributory pension scheme Holidays: 28 days' annual leave plus bank holidays Training and development: We offer a wide range of learning opportunities with over 1,100 internal courses available, funding for qualifications and apprenticeships, mentoring opportunities, and a focus on internal progression Wellbeing: 24/7 Employee Assistance Programme, BUPA Anytime HealthLine, wellbeing app, Simplyhealth cash plans to claim back money towards healthcare costs, 30% off at Serco-managed leisure centres Discounts: Save across around 1,000 retailers, from food and clothing to days out, entertainment and travel ShareSave scheme: Helps you save regularly with the choice to buy Serco shares at a discount at the end of your savings period Employee networks: Dedicated networks where colleagues can come together to find support, share challenges, discuss ideas, network and be part of a community Charity: You can also choose to donate to your favourite charity tax-free, through our Payroll Giving Scheme. To discover more about our careers in Defence, meet our team, and to find out more about what we offer, please follow this Link . We're also a signatory of the UK Governments Women in Defence Charter, to find out more please click here . Please click on the apply button to complete your application. Occasionally we receive a large volume of applications for our roles and when that happens, we sometimes bring the closing date forward, so please apply promptly to avoid disappointment. At Serco, we see people first and foremost for their performance and potential. We are committed to building a diverse and inclusive organisation that supports the needs of all. As such we will make reasonable adjustments at interview through to employment for our candidates and strongly encourage applications from a diverse candidate pool. We are open to discussions around flexibility and flexible working. As a proud Disability Confident Leader and holder of the Gold Inclusive Employer Standard, disabled applicants who meet the minimum criteria for the job will be given the opportunity to demonstrate their abilities at an interview.
Oct 08, 2025
Full time
Aircraft Engineering Supervisors (Wildcat) (Mechanical and Avionics) RNAS Yeovilton, Yeovil BA22 8HT Competitive salary plus benefits 38 hours /40 hours or 45 hours per week contracts available/ Monday- Friday Are you looking to develop a career in Aviation supporting the Royal Navy? Do you have hands on Aircraft experience, if so we would love to hear from you. Serco are proud to support the Fleet Air Arm, including the Wildcat Maritime Force (WMF) based at Royal Naval Air Station Yeovilton, delivering services ranging from the repair and maintenance of military aircraft- to fuel delivery and off aircraft support services. Yeovilton is one of the Royal Navy s two principal air stations, is one of the busiest military airfields in the UK and home to more than 100 aircraft. Serco have some exciting opportunities for Aircraft Engineering Supervisors (Any Trade) (Wildcat) to be based at our site at RNAS Yeovilton located in Somerset. This role is responsible for the aircraft management and ground support to our Wildcat aircrafts. Our Aircraft Engineering Supervisors carry out contracted tasks ensuring customer policy and regulations are met to a high standard, whilst ensuring any customer complaints or quality issues and business risks are raised with Team leads. Within this role, our Aircraft Fitters will comply with The Health and Safety at Work (HASAW) Act 1974 and Customer Policy and Regulations. You will be responsible for completing any administration duties required to the role and be willing to attend further training courses to develop your skills and knowledge in the role. We offer this position as either 40 or 45 hours per week, working Monday- Friday, plus an option to undertake shift work, with additional shift pay. What you'll need to do the role: Minimum of 6 years working in an airworthiness environment, relevant experience for the Wildcat aircraft, with a minimum of 2 years hands on experience Hold/have ability to hold Certificate of Competency for Supervisory level Attained formal training in the Wildcat aircraft and associated trade systems. Previous experience and a good working knowledge of the following: Wildcat Aircraft Engineering and Aircraft Systems (by Trade). Wildcat Aircraft Servicing and Support Equipment. Hold a certificate of Competency at Supervisor level An understanding of Lean Operating Procedures. An understanding of Naval Air Publications and Compound - Interactive Electronic Technical Publications (C-IETP). Adhere to Health and Safety, the Control of Substances Hazardous to Health (COSHH) Regulations, Tool Control and Quality Practices. An understanding of Engineering and Asset Management Systems. Completed or able to complete Maintenance Human Factors Course. Understand rotary wing military (aviation) procedures. An understanding of Airworthiness Engineering Safety and Compliance iaw Regulatory and Legislative requirements (MAA). A capability to work productively, efficiently & effectively with initiative and drive under tight timescales and pressure whilst maintaining operational outputs. Ability to achieve SC clearance What we offer: Salary: Competitive salaries with annual reviews Pension: Up to 6% contributory pension scheme Holidays: 28 days' annual leave plus bank holidays Training and development: We offer a wide range of learning opportunities with over 1,100 internal courses available, funding for qualifications and apprenticeships, mentoring opportunities, and a focus on internal progression Wellbeing: 24/7 Employee Assistance Programme, BUPA Anytime HealthLine, wellbeing app, Simplyhealth cash plans to claim back money towards healthcare costs, 30% off at Serco-managed leisure centres Discounts: Save across around 1,000 retailers, from food and clothing to days out, entertainment and travel ShareSave scheme: Helps you save regularly with the choice to buy Serco shares at a discount at the end of your savings period Employee networks: Dedicated networks where colleagues can come together to find support, share challenges, discuss ideas, network and be part of a community Charity: You can also choose to donate to your favourite charity tax-free, through our Payroll Giving Scheme. To discover more about our careers in Defence, meet our team, and to find out more about what we offer, please follow this Link . We're also a signatory of the UK Governments Women in Defence Charter, to find out more please click here . Please click on the apply button to complete your application. Occasionally we receive a large volume of applications for our roles and when that happens, we sometimes bring the closing date forward, so please apply promptly to avoid disappointment. At Serco, we see people first and foremost for their performance and potential. We are committed to building a diverse and inclusive organisation that supports the needs of all. As such we will make reasonable adjustments at interview through to employment for our candidates and strongly encourage applications from a diverse candidate pool. We are open to discussions around flexibility and flexible working. As a proud Disability Confident Leader and holder of the Gold Inclusive Employer Standard, disabled applicants who meet the minimum criteria for the job will be given the opportunity to demonstrate their abilities at an interview.
Aircraft Engineering Supervisor (Mechanical) (Merlin) RNAS Culdrose, Helston TR12 7RH Competitive salary with excellent benefits 38 hours per week/ Monday - Friday Are you looking to develop a career in aviation supporting the Royal Navy? Do you have hands on aircraft experience? If so, we would love to hear from you. At Serco, we have exciting opportunities for a Mechanical Supervisor (Merlin) to join us at the Royal Navy Air Station (RNAS) Culdrose, Helston. We're proud to support the IMOS (Integrated Merlin Operational Support) and the AESAS (Aircraft Engineering Support and Aviation Support) at RNAS Culdrose, delivering activities ranging from the repair and maintenance of military aircraft to off-aircraft support services. Culdrose is one of the Navy s two principal air bases, and one of the busiest military airfields in the UK. Our Aircraft Engineers will support Aircraft Engineering services at RNAS Culdrose across both AESAS and IMOS Contracts, supporting operational deliverables and interfaces in a highly regulated environment. What you'll need: Minimum of 6 years working in an airworthiness environment, relevant experience for the Merlin aircraft, with a minimum of 2 years hands on experience Hold/have ability to hold Certificate of Competency for Supervisory level Previous experience and a good working knowledge of the following: Merlin Aircraft Engineering and Aircraft Systems Merlin Aircraft Servicing and Support Equipment Lean Operating Procedures Naval Air Publications and Compound Interactive Electronic Technical Publications (CIETP); Health and Safety The Control of Substances Hazardous to Health (COSHH) Regulations; and Tool Control and Quality Practices An understanding of Engineering and Asset Management Systems To have completed or ability to complete Maintenance Human Factors course What we offer: Salary: Competitive salaries with annual reviews Pension: Up to 6% contributory pension scheme Holidays: 29 days' annual leave plus bank holidays Training and development: We offer a wide range of learning opportunitieswith over 1,100 internal courses available, funding for qualifications and apprenticeships, mentoring opportunities, and a focus on internal progression Wellbeing: 24/7 Employee Assistance Programme, BUPA Anytime HealthLine, wellbeing app, Simplyhealth cash plans to claim back money towards healthcare costs, 30% off at Serco-managed leisure centres Discounts: Save across around 1,000 retailers, from food and clothing to days out, entertainment and travel ShareSave scheme: Helps you save regularly with the choice to buy Serco shares at a discount at the end of your savings period Employee networks: Dedicated networks where colleagues can come together to find support, share challenges, discuss ideas, network and be part of a community Charity: You can also choose to donate to your favourite charity tax-free, through our Payroll Giving Scheme. To discover more about our careers in Defence, meet our team, and to find out more about what we offer, please follow this Link . We're also a signatory of the UK Governments Women in Defence Charter, to find out more please click here . Please click on the apply button to complete your application. Occasionally we receive a large volume of applications for our roles and when that happens, we sometimes bring the closing date forward, so please apply promptly to avoid disappointment. At Serco, we see people first and foremost for their performance and potential. We are committed to building a diverse and inclusive organisation that supports the needs of all. As such we will make reasonable adjustments at interview through to employment for our candidates and strongly encourage applications from a diverse candidate pool. We are open to discussions around flexibility and flexible working. As a proud Disability Confident Leader and holder of the Gold Inclusive Employer Standard, disabled applicants who meet the minimum criteria for the job will be given the opportunity to demonstrate their abilities at an interview.
Oct 08, 2025
Full time
Aircraft Engineering Supervisor (Mechanical) (Merlin) RNAS Culdrose, Helston TR12 7RH Competitive salary with excellent benefits 38 hours per week/ Monday - Friday Are you looking to develop a career in aviation supporting the Royal Navy? Do you have hands on aircraft experience? If so, we would love to hear from you. At Serco, we have exciting opportunities for a Mechanical Supervisor (Merlin) to join us at the Royal Navy Air Station (RNAS) Culdrose, Helston. We're proud to support the IMOS (Integrated Merlin Operational Support) and the AESAS (Aircraft Engineering Support and Aviation Support) at RNAS Culdrose, delivering activities ranging from the repair and maintenance of military aircraft to off-aircraft support services. Culdrose is one of the Navy s two principal air bases, and one of the busiest military airfields in the UK. Our Aircraft Engineers will support Aircraft Engineering services at RNAS Culdrose across both AESAS and IMOS Contracts, supporting operational deliverables and interfaces in a highly regulated environment. What you'll need: Minimum of 6 years working in an airworthiness environment, relevant experience for the Merlin aircraft, with a minimum of 2 years hands on experience Hold/have ability to hold Certificate of Competency for Supervisory level Previous experience and a good working knowledge of the following: Merlin Aircraft Engineering and Aircraft Systems Merlin Aircraft Servicing and Support Equipment Lean Operating Procedures Naval Air Publications and Compound Interactive Electronic Technical Publications (CIETP); Health and Safety The Control of Substances Hazardous to Health (COSHH) Regulations; and Tool Control and Quality Practices An understanding of Engineering and Asset Management Systems To have completed or ability to complete Maintenance Human Factors course What we offer: Salary: Competitive salaries with annual reviews Pension: Up to 6% contributory pension scheme Holidays: 29 days' annual leave plus bank holidays Training and development: We offer a wide range of learning opportunitieswith over 1,100 internal courses available, funding for qualifications and apprenticeships, mentoring opportunities, and a focus on internal progression Wellbeing: 24/7 Employee Assistance Programme, BUPA Anytime HealthLine, wellbeing app, Simplyhealth cash plans to claim back money towards healthcare costs, 30% off at Serco-managed leisure centres Discounts: Save across around 1,000 retailers, from food and clothing to days out, entertainment and travel ShareSave scheme: Helps you save regularly with the choice to buy Serco shares at a discount at the end of your savings period Employee networks: Dedicated networks where colleagues can come together to find support, share challenges, discuss ideas, network and be part of a community Charity: You can also choose to donate to your favourite charity tax-free, through our Payroll Giving Scheme. To discover more about our careers in Defence, meet our team, and to find out more about what we offer, please follow this Link . We're also a signatory of the UK Governments Women in Defence Charter, to find out more please click here . Please click on the apply button to complete your application. Occasionally we receive a large volume of applications for our roles and when that happens, we sometimes bring the closing date forward, so please apply promptly to avoid disappointment. At Serco, we see people first and foremost for their performance and potential. We are committed to building a diverse and inclusive organisation that supports the needs of all. As such we will make reasonable adjustments at interview through to employment for our candidates and strongly encourage applications from a diverse candidate pool. We are open to discussions around flexibility and flexible working. As a proud Disability Confident Leader and holder of the Gold Inclusive Employer Standard, disabled applicants who meet the minimum criteria for the job will be given the opportunity to demonstrate their abilities at an interview.
Aircraft Engineering Supervisors (Wildcat) (Mechanical and Avionics) RNAS Yeovilton, Yeovil BA22 8HT Competitive salary plus benefits 38 hours /40 hours or 45 hours per week contracts available/ Monday- Friday Are you looking to develop a career in Aviation supporting the Royal Navy? Do you have hands on Aircraft experience, if so we would love to hear from you. Serco are proud to support the Fleet Air Arm, including the Wildcat Maritime Force (WMF) based at Royal Naval Air Station Yeovilton, delivering services ranging from the repair and maintenance of military aircraft- to fuel delivery and off aircraft support services. Yeovilton is one of the Royal Navy s two principal air stations, is one of the busiest military airfields in the UK and home to more than 100 aircraft. Serco have some exciting opportunities for Aircraft Engineering Supervisors (Any Trade) (Wildcat) to be based at our site at RNAS Yeovilton located in Somerset. This role is responsible for the aircraft management and ground support to our Wildcat aircrafts. Our Aircraft Engineering Supervisors carry out contracted tasks ensuring customer policy and regulations are met to a high standard, whilst ensuring any customer complaints or quality issues and business risks are raised with Team leads. Within this role, our Aircraft Fitters will comply with The Health and Safety at Work (HASAW) Act 1974 and Customer Policy and Regulations. You will be responsible for completing any administration duties required to the role and be willing to attend further training courses to develop your skills and knowledge in the role. We offer this position as either 40 or 45 hours per week, working Monday- Friday, plus an option to undertake shift work, with additional shift pay. What you'll need to do the role: Minimum of 6 years working in an airworthiness environment, relevant experience for the Wildcat aircraft, with a minimum of 2 years hands on experience Hold/have ability to hold Certificate of Competency for Supervisory level Attained formal training in the Wildcat aircraft and associated trade systems. Previous experience and a good working knowledge of the following: Wildcat Aircraft Engineering and Aircraft Systems (by Trade). Wildcat Aircraft Servicing and Support Equipment. Hold a certificate of Competency at Supervisor level An understanding of Lean Operating Procedures. An understanding of Naval Air Publications and Compound - Interactive Electronic Technical Publications (C-IETP). Adhere to Health and Safety, the Control of Substances Hazardous to Health (COSHH) Regulations, Tool Control and Quality Practices. An understanding of Engineering and Asset Management Systems. Completed or able to complete Maintenance Human Factors Course. Understand rotary wing military (aviation) procedures. An understanding of Airworthiness Engineering Safety and Compliance iaw Regulatory and Legislative requirements (MAA). A capability to work productively, efficiently & effectively with initiative and drive under tight timescales and pressure whilst maintaining operational outputs. Ability to achieve SC clearance What we offer: Salary: Competitive salaries with annual reviews Pension: Up to 6% contributory pension scheme Holidays: 28 days' annual leave plus bank holidays Training and development: We offer a wide range of learning opportunities with over 1,100 internal courses available, funding for qualifications and apprenticeships, mentoring opportunities, and a focus on internal progression Wellbeing: 24/7 Employee Assistance Programme, BUPA Anytime HealthLine, wellbeing app, Simplyhealth cash plans to claim back money towards healthcare costs, 30% off at Serco-managed leisure centres Discounts: Save across around 1,000 retailers, from food and clothing to days out, entertainment and travel ShareSave scheme: Helps you save regularly with the choice to buy Serco shares at a discount at the end of your savings period Employee networks: Dedicated networks where colleagues can come together to find support, share challenges, discuss ideas, network and be part of a community Charity: You can also choose to donate to your favourite charity tax-free, through our Payroll Giving Scheme. To discover more about our careers in Defence, meet our team, and to find out more about what we offer, please follow this Link . We're also a signatory of the UK Governments Women in Defence Charter, to find out more please click here . Please click on the apply button to complete your application. Occasionally we receive a large volume of applications for our roles and when that happens, we sometimes bring the closing date forward, so please apply promptly to avoid disappointment. At Serco, we see people first and foremost for their performance and potential. We are committed to building a diverse and inclusive organisation that supports the needs of all. As such we will make reasonable adjustments at interview through to employment for our candidates and strongly encourage applications from a diverse candidate pool. We are open to discussions around flexibility and flexible working. As a proud Disability Confident Leader and holder of the Gold Inclusive Employer Standard, disabled applicants who meet the minimum criteria for the job will be given the opportunity to demonstrate their abilities at an interview.
Oct 08, 2025
Full time
Aircraft Engineering Supervisors (Wildcat) (Mechanical and Avionics) RNAS Yeovilton, Yeovil BA22 8HT Competitive salary plus benefits 38 hours /40 hours or 45 hours per week contracts available/ Monday- Friday Are you looking to develop a career in Aviation supporting the Royal Navy? Do you have hands on Aircraft experience, if so we would love to hear from you. Serco are proud to support the Fleet Air Arm, including the Wildcat Maritime Force (WMF) based at Royal Naval Air Station Yeovilton, delivering services ranging from the repair and maintenance of military aircraft- to fuel delivery and off aircraft support services. Yeovilton is one of the Royal Navy s two principal air stations, is one of the busiest military airfields in the UK and home to more than 100 aircraft. Serco have some exciting opportunities for Aircraft Engineering Supervisors (Any Trade) (Wildcat) to be based at our site at RNAS Yeovilton located in Somerset. This role is responsible for the aircraft management and ground support to our Wildcat aircrafts. Our Aircraft Engineering Supervisors carry out contracted tasks ensuring customer policy and regulations are met to a high standard, whilst ensuring any customer complaints or quality issues and business risks are raised with Team leads. Within this role, our Aircraft Fitters will comply with The Health and Safety at Work (HASAW) Act 1974 and Customer Policy and Regulations. You will be responsible for completing any administration duties required to the role and be willing to attend further training courses to develop your skills and knowledge in the role. We offer this position as either 40 or 45 hours per week, working Monday- Friday, plus an option to undertake shift work, with additional shift pay. What you'll need to do the role: Minimum of 6 years working in an airworthiness environment, relevant experience for the Wildcat aircraft, with a minimum of 2 years hands on experience Hold/have ability to hold Certificate of Competency for Supervisory level Attained formal training in the Wildcat aircraft and associated trade systems. Previous experience and a good working knowledge of the following: Wildcat Aircraft Engineering and Aircraft Systems (by Trade). Wildcat Aircraft Servicing and Support Equipment. Hold a certificate of Competency at Supervisor level An understanding of Lean Operating Procedures. An understanding of Naval Air Publications and Compound - Interactive Electronic Technical Publications (C-IETP). Adhere to Health and Safety, the Control of Substances Hazardous to Health (COSHH) Regulations, Tool Control and Quality Practices. An understanding of Engineering and Asset Management Systems. Completed or able to complete Maintenance Human Factors Course. Understand rotary wing military (aviation) procedures. An understanding of Airworthiness Engineering Safety and Compliance iaw Regulatory and Legislative requirements (MAA). A capability to work productively, efficiently & effectively with initiative and drive under tight timescales and pressure whilst maintaining operational outputs. Ability to achieve SC clearance What we offer: Salary: Competitive salaries with annual reviews Pension: Up to 6% contributory pension scheme Holidays: 28 days' annual leave plus bank holidays Training and development: We offer a wide range of learning opportunities with over 1,100 internal courses available, funding for qualifications and apprenticeships, mentoring opportunities, and a focus on internal progression Wellbeing: 24/7 Employee Assistance Programme, BUPA Anytime HealthLine, wellbeing app, Simplyhealth cash plans to claim back money towards healthcare costs, 30% off at Serco-managed leisure centres Discounts: Save across around 1,000 retailers, from food and clothing to days out, entertainment and travel ShareSave scheme: Helps you save regularly with the choice to buy Serco shares at a discount at the end of your savings period Employee networks: Dedicated networks where colleagues can come together to find support, share challenges, discuss ideas, network and be part of a community Charity: You can also choose to donate to your favourite charity tax-free, through our Payroll Giving Scheme. To discover more about our careers in Defence, meet our team, and to find out more about what we offer, please follow this Link . We're also a signatory of the UK Governments Women in Defence Charter, to find out more please click here . Please click on the apply button to complete your application. Occasionally we receive a large volume of applications for our roles and when that happens, we sometimes bring the closing date forward, so please apply promptly to avoid disappointment. At Serco, we see people first and foremost for their performance and potential. We are committed to building a diverse and inclusive organisation that supports the needs of all. As such we will make reasonable adjustments at interview through to employment for our candidates and strongly encourage applications from a diverse candidate pool. We are open to discussions around flexibility and flexible working. As a proud Disability Confident Leader and holder of the Gold Inclusive Employer Standard, disabled applicants who meet the minimum criteria for the job will be given the opportunity to demonstrate their abilities at an interview.
Aircraft Engineering Supervisor (Mechanical) (Merlin) RNAS Culdrose, Helston TR12 7RH Competitive salary with excellent benefits 38 hours per week/ Monday - Friday Are you looking to develop a career in aviation supporting the Royal Navy? Do you have hands on aircraft experience? If so, we would love to hear from you. At Serco, we have exciting opportunities for a Mechanical Supervisor (Merlin) to join us at the Royal Navy Air Station (RNAS) Culdrose, Helston. We're proud to support the IMOS (Integrated Merlin Operational Support) and the AESAS (Aircraft Engineering Support and Aviation Support) at RNAS Culdrose, delivering activities ranging from the repair and maintenance of military aircraft to off-aircraft support services. Culdrose is one of the Navy s two principal air bases, and one of the busiest military airfields in the UK. Our Aircraft Engineers will support Aircraft Engineering services at RNAS Culdrose across both AESAS and IMOS Contracts, supporting operational deliverables and interfaces in a highly regulated environment. What you'll need: Minimum of 6 years working in an airworthiness environment, relevant experience for the Merlin aircraft, with a minimum of 2 years hands on experience Hold/have ability to hold Certificate of Competency for Supervisory level Previous experience and a good working knowledge of the following: Merlin Aircraft Engineering and Aircraft Systems Merlin Aircraft Servicing and Support Equipment Lean Operating Procedures Naval Air Publications and Compound Interactive Electronic Technical Publications (CIETP); Health and Safety The Control of Substances Hazardous to Health (COSHH) Regulations; and Tool Control and Quality Practices An understanding of Engineering and Asset Management Systems To have completed or ability to complete Maintenance Human Factors course What we offer: Salary: Competitive salaries with annual reviews Pension: Up to 6% contributory pension scheme Holidays: 29 days' annual leave plus bank holidays Training and development: We offer a wide range of learning opportunitieswith over 1,100 internal courses available, funding for qualifications and apprenticeships, mentoring opportunities, and a focus on internal progression Wellbeing: 24/7 Employee Assistance Programme, BUPA Anytime HealthLine, wellbeing app, Simplyhealth cash plans to claim back money towards healthcare costs, 30% off at Serco-managed leisure centres Discounts: Save across around 1,000 retailers, from food and clothing to days out, entertainment and travel ShareSave scheme: Helps you save regularly with the choice to buy Serco shares at a discount at the end of your savings period Employee networks: Dedicated networks where colleagues can come together to find support, share challenges, discuss ideas, network and be part of a community Charity: You can also choose to donate to your favourite charity tax-free, through our Payroll Giving Scheme. To discover more about our careers in Defence, meet our team, and to find out more about what we offer, please follow this Link . We're also a signatory of the UK Governments Women in Defence Charter, to find out more please click here . Please click on the apply button to complete your application. Occasionally we receive a large volume of applications for our roles and when that happens, we sometimes bring the closing date forward, so please apply promptly to avoid disappointment. At Serco, we see people first and foremost for their performance and potential. We are committed to building a diverse and inclusive organisation that supports the needs of all. As such we will make reasonable adjustments at interview through to employment for our candidates and strongly encourage applications from a diverse candidate pool. We are open to discussions around flexibility and flexible working. As a proud Disability Confident Leader and holder of the Gold Inclusive Employer Standard, disabled applicants who meet the minimum criteria for the job will be given the opportunity to demonstrate their abilities at an interview.
Oct 08, 2025
Full time
Aircraft Engineering Supervisor (Mechanical) (Merlin) RNAS Culdrose, Helston TR12 7RH Competitive salary with excellent benefits 38 hours per week/ Monday - Friday Are you looking to develop a career in aviation supporting the Royal Navy? Do you have hands on aircraft experience? If so, we would love to hear from you. At Serco, we have exciting opportunities for a Mechanical Supervisor (Merlin) to join us at the Royal Navy Air Station (RNAS) Culdrose, Helston. We're proud to support the IMOS (Integrated Merlin Operational Support) and the AESAS (Aircraft Engineering Support and Aviation Support) at RNAS Culdrose, delivering activities ranging from the repair and maintenance of military aircraft to off-aircraft support services. Culdrose is one of the Navy s two principal air bases, and one of the busiest military airfields in the UK. Our Aircraft Engineers will support Aircraft Engineering services at RNAS Culdrose across both AESAS and IMOS Contracts, supporting operational deliverables and interfaces in a highly regulated environment. What you'll need: Minimum of 6 years working in an airworthiness environment, relevant experience for the Merlin aircraft, with a minimum of 2 years hands on experience Hold/have ability to hold Certificate of Competency for Supervisory level Previous experience and a good working knowledge of the following: Merlin Aircraft Engineering and Aircraft Systems Merlin Aircraft Servicing and Support Equipment Lean Operating Procedures Naval Air Publications and Compound Interactive Electronic Technical Publications (CIETP); Health and Safety The Control of Substances Hazardous to Health (COSHH) Regulations; and Tool Control and Quality Practices An understanding of Engineering and Asset Management Systems To have completed or ability to complete Maintenance Human Factors course What we offer: Salary: Competitive salaries with annual reviews Pension: Up to 6% contributory pension scheme Holidays: 29 days' annual leave plus bank holidays Training and development: We offer a wide range of learning opportunitieswith over 1,100 internal courses available, funding for qualifications and apprenticeships, mentoring opportunities, and a focus on internal progression Wellbeing: 24/7 Employee Assistance Programme, BUPA Anytime HealthLine, wellbeing app, Simplyhealth cash plans to claim back money towards healthcare costs, 30% off at Serco-managed leisure centres Discounts: Save across around 1,000 retailers, from food and clothing to days out, entertainment and travel ShareSave scheme: Helps you save regularly with the choice to buy Serco shares at a discount at the end of your savings period Employee networks: Dedicated networks where colleagues can come together to find support, share challenges, discuss ideas, network and be part of a community Charity: You can also choose to donate to your favourite charity tax-free, through our Payroll Giving Scheme. To discover more about our careers in Defence, meet our team, and to find out more about what we offer, please follow this Link . We're also a signatory of the UK Governments Women in Defence Charter, to find out more please click here . Please click on the apply button to complete your application. Occasionally we receive a large volume of applications for our roles and when that happens, we sometimes bring the closing date forward, so please apply promptly to avoid disappointment. At Serco, we see people first and foremost for their performance and potential. We are committed to building a diverse and inclusive organisation that supports the needs of all. As such we will make reasonable adjustments at interview through to employment for our candidates and strongly encourage applications from a diverse candidate pool. We are open to discussions around flexibility and flexible working. As a proud Disability Confident Leader and holder of the Gold Inclusive Employer Standard, disabled applicants who meet the minimum criteria for the job will be given the opportunity to demonstrate their abilities at an interview.
Job Title: Aircraft - Training Support Location: RAF Marham - Onsite Salary: £38,398+ (DOE) What you'll be doing MCS administrator for all Maintenance and Finishing Facility (M&FF) personnel who require an account - initial account set-up, role and location changes, recording all authorisations and training, account archive, account and/or authorisation suspensions Filing/archiving of all training paperwork (TCRs, training packs, certificates) and check and process all induction paperwork, leavers paperwork, training packs and so on Assist in providing - training stats, status reports Support for authorisation & competence queries/advice and assist in producing and processing of Comp C/Cat C/assessor paperwork Assist in producing training/role profiles for new starters and deliver training as required Financial responsibility will hold a corporate procurement card Your skills and experiences: Essential: Completion of an Engineering Apprenticeship in Aeronautical Engineering, or Military equivalent Apprenticeship / qualifications (Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent) Understands the Regulatory Framework and its applicability to the training processes and activities. Have operational knowledge and understanding of Training and instructional delivery activities, and the business' key performance metrics Understanding of M&CA operations and the requirements of a PT145/147/66/Pt M Able to assess and interpret data with a high level of attention to detail Comprehensive understanding of current IT software packages used within the Training discipline and maintenance delivery Desirable: Training Qualification at Level 3 or above (Level 3 Award in Education & Training) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Training Support Team: Join our Training Support Team, a small but pivotal function within a growing organisation. Working closely with the F-35 Training Lead, the team defines training requirements, develops and approves fit-for-purpose solutions, and ensures operational efficiency while optimising costs. With responsibility spanning training delivery, governance, and cross-functional collaboration across our hangar teams, this team plays a vital role in enabling people capability and supporting organisational growth. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 16th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Oct 08, 2025
Full time
Job Title: Aircraft - Training Support Location: RAF Marham - Onsite Salary: £38,398+ (DOE) What you'll be doing MCS administrator for all Maintenance and Finishing Facility (M&FF) personnel who require an account - initial account set-up, role and location changes, recording all authorisations and training, account archive, account and/or authorisation suspensions Filing/archiving of all training paperwork (TCRs, training packs, certificates) and check and process all induction paperwork, leavers paperwork, training packs and so on Assist in providing - training stats, status reports Support for authorisation & competence queries/advice and assist in producing and processing of Comp C/Cat C/assessor paperwork Assist in producing training/role profiles for new starters and deliver training as required Financial responsibility will hold a corporate procurement card Your skills and experiences: Essential: Completion of an Engineering Apprenticeship in Aeronautical Engineering, or Military equivalent Apprenticeship / qualifications (Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent) Understands the Regulatory Framework and its applicability to the training processes and activities. Have operational knowledge and understanding of Training and instructional delivery activities, and the business' key performance metrics Understanding of M&CA operations and the requirements of a PT145/147/66/Pt M Able to assess and interpret data with a high level of attention to detail Comprehensive understanding of current IT software packages used within the Training discipline and maintenance delivery Desirable: Training Qualification at Level 3 or above (Level 3 Award in Education & Training) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Training Support Team: Join our Training Support Team, a small but pivotal function within a growing organisation. Working closely with the F-35 Training Lead, the team defines training requirements, develops and approves fit-for-purpose solutions, and ensures operational efficiency while optimising costs. With responsibility spanning training delivery, governance, and cross-functional collaboration across our hangar teams, this team plays a vital role in enabling people capability and supporting organisational growth. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 16th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Ernest Gordon Recruitment Limited
Sudbury, Suffolk
CAD Technician (SolidWorks/ Aerospace/ MOD) Sudbury Up to 35,000 + Training + Career Progression + Working on MOD & Commercial Aircraft Projects + Great Team Culture Are you a CAD Technician or similar with experience using SolidWorks, looking for an exciting role where you'll be designing components for real aircraft including projects for the MOD and leading commercial airlines while joining a close-knit, fast-growing aerospace company where you'll get hands-on experience, full training, and the chance to progress your career in a great industry? Do you want the opportunity to join a leading name in aerospace technology, working at the cutting edge of aircraft design and component support? The company has grown rapidly to become one of the UK's most trusted providers of aircraft rotables, supporting over 100 airlines in 30+ countries On offer is a fantastic opportunity to join a fun, passionate, and collaborative engineering team where your designs help aircraft get in the sky. You'll be part of a company that invests in its people, encourages new ideas, and offers genuine progression and training in aerospace design and development. With exciting MOD and civil aviation projects, no two days will ever be the same. In the role, you'll create and modify detailed 3D models and technical drawings using SolidWorks, working closely with senior engineers and designers to bring projects from concept to completion. You'll ensure precision and compliance in every drawing, assist in documentation and specifications, and be part of a high-energy team that thrives on solving engineering challenges. This is your chance to use your technical creativity to make a real-world impact in the aerospace industry. This role would suit a CAD Technician or similar with experience using SolidWorks, looking for an exciting role where you'll be designing components for real aircraft including projects for the MOD and leading commercial airlines while joining a close-knit, fast-growing aerospace company where you'll get hands-on experience, full training, and the chance to progress your career in a great industry. The Role: Design and produce 3D models and detailed technical drawings using SolidWorks. Collaborate with engineers and project teams on aircraft component design. Work on real MOD and commercial aircraft projects with full training and support. The Person: CAD Technician or similar SolidWorks experience Based in Sudbury or easily commutable to Reference Number: BBBH22078 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Oct 08, 2025
Full time
CAD Technician (SolidWorks/ Aerospace/ MOD) Sudbury Up to 35,000 + Training + Career Progression + Working on MOD & Commercial Aircraft Projects + Great Team Culture Are you a CAD Technician or similar with experience using SolidWorks, looking for an exciting role where you'll be designing components for real aircraft including projects for the MOD and leading commercial airlines while joining a close-knit, fast-growing aerospace company where you'll get hands-on experience, full training, and the chance to progress your career in a great industry? Do you want the opportunity to join a leading name in aerospace technology, working at the cutting edge of aircraft design and component support? The company has grown rapidly to become one of the UK's most trusted providers of aircraft rotables, supporting over 100 airlines in 30+ countries On offer is a fantastic opportunity to join a fun, passionate, and collaborative engineering team where your designs help aircraft get in the sky. You'll be part of a company that invests in its people, encourages new ideas, and offers genuine progression and training in aerospace design and development. With exciting MOD and civil aviation projects, no two days will ever be the same. In the role, you'll create and modify detailed 3D models and technical drawings using SolidWorks, working closely with senior engineers and designers to bring projects from concept to completion. You'll ensure precision and compliance in every drawing, assist in documentation and specifications, and be part of a high-energy team that thrives on solving engineering challenges. This is your chance to use your technical creativity to make a real-world impact in the aerospace industry. This role would suit a CAD Technician or similar with experience using SolidWorks, looking for an exciting role where you'll be designing components for real aircraft including projects for the MOD and leading commercial airlines while joining a close-knit, fast-growing aerospace company where you'll get hands-on experience, full training, and the chance to progress your career in a great industry. The Role: Design and produce 3D models and detailed technical drawings using SolidWorks. Collaborate with engineers and project teams on aircraft component design. Work on real MOD and commercial aircraft projects with full training and support. The Person: CAD Technician or similar SolidWorks experience Based in Sudbury or easily commutable to Reference Number: BBBH22078 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Job Title: Manufacturing Technician Salary: £37,935 per annum + 25% shift allowance (£47,418) + overtime Location: Radway Green We currently have a vacancy to join one of the world s leading, global defence, security and aerospace companies as a Manufacturing Technician. The role will be based at Radway Green just outside of Crewe and will require the successful candidate to be on site full time working a varied shift pattern (please see details below). The company works at the cutting edge of technology, creating more than 100 new inventions every year for customers in over 100 countries. You will be joining the Manufacturing team who operate on a 3 shift rotating system, working 37 hours per week. The 3 shifts are as follows: Monday- Thurs: 8 hours per shift Fridays: 5 hours per shift Overtime is also available at a 25% enhancement rate during the week and a 60% enhancement rate at the weekend. This post would suit someone with either High Volume precision skills or a Tool change/ Machine Setup background who can work with smaller equipment machines due to the fine adjustments and setups needed. Candidates with tool setting or tool change experience who can setup and tune a machine, have skills on fine tuning but also running machinery is highly advantageous for this role. If you have had a previous role as one of the following roles then we would like to hear from you: Machine Setup Technician, Die Setter, Inspection Setup Technician, Tool Setter/ Toolroom Technician, or previous precision manufacturing experience. Main Responsibilities: Ensuring processes are maintained and operated in a safe manner and escalate issues affecting safety within the given production area Ensuring that work undertaken adheres to relevant quality standards and provides support in the implementation of quality improvement projects Operating of manufacturing processes and facilities to meet production programme requirements Supporting implementation of continuous improvement activities Identifying, raising and implementing solutions to safety, quality and production problems Benefits: Overtime is also available at a 25% enhancement rate during the week and a 60% enhancement rate at the weekend. Enhanced Pension scheme- up to 14% combined Flexible working pattern including working from home/ flexible start and finish times 25 holiday days plus bank holidays- 26 days after 5 years service/ 27 days after 10 years service Shared Incentive Plan Employee Assistance Programme Cycle to Work Scheme Life Assurance (you and your spouse/ partner)- 6 x salary Ill Health Income Protection/ Private Medical Insurance- 50% of salary About You: Essential: A time served mechanical engineering apprenticeship in a manufacturing environment (minimum NVQ Level 3) Experience of working within a fast paced production environment whilst conducting planned maintenance work Experience in the setting and operating of manufacturing plant and equipment Experienced in fault finding with root cause, corrective and preventative activities High volume precision skills or a Tool change/ Machine setup background Desirable: Basic understanding of Statistical Process Control (SPC) Experience with pneumatic and automated systems Experience in blow moulding would be highly desirable You must be eligible to apply for SC clearance and, therefore, must hold a British passport and have lived and worked in the UK for the past 5 years About Aeropeople: Whether you re looking for your next job or searching out the next superstar to join your team Aeropeople s expertise and experience is entrenched in the aerospace, aviation, engineering, motorsport, automotive, and defence industries. We have the insight and know-how at both a local and international level to help bring people and businesses together, saving time and energy. Our capability is validated through our Engineering Services division encompassing Aircraft Line Maintenance services and Continuing Airworthiness Maintenance Organisation (CAMO), combined with our Aviation Training division offering technical training aircraft courses. During registration, please let us know where you are currently located or which locations you would consider taking a position in, required salary and notice period. For the latest news, events and jobs please search Aeropeople Ltd on LinkedIn and Facebook for our latest jobs
Oct 08, 2025
Full time
Job Title: Manufacturing Technician Salary: £37,935 per annum + 25% shift allowance (£47,418) + overtime Location: Radway Green We currently have a vacancy to join one of the world s leading, global defence, security and aerospace companies as a Manufacturing Technician. The role will be based at Radway Green just outside of Crewe and will require the successful candidate to be on site full time working a varied shift pattern (please see details below). The company works at the cutting edge of technology, creating more than 100 new inventions every year for customers in over 100 countries. You will be joining the Manufacturing team who operate on a 3 shift rotating system, working 37 hours per week. The 3 shifts are as follows: Monday- Thurs: 8 hours per shift Fridays: 5 hours per shift Overtime is also available at a 25% enhancement rate during the week and a 60% enhancement rate at the weekend. This post would suit someone with either High Volume precision skills or a Tool change/ Machine Setup background who can work with smaller equipment machines due to the fine adjustments and setups needed. Candidates with tool setting or tool change experience who can setup and tune a machine, have skills on fine tuning but also running machinery is highly advantageous for this role. If you have had a previous role as one of the following roles then we would like to hear from you: Machine Setup Technician, Die Setter, Inspection Setup Technician, Tool Setter/ Toolroom Technician, or previous precision manufacturing experience. Main Responsibilities: Ensuring processes are maintained and operated in a safe manner and escalate issues affecting safety within the given production area Ensuring that work undertaken adheres to relevant quality standards and provides support in the implementation of quality improvement projects Operating of manufacturing processes and facilities to meet production programme requirements Supporting implementation of continuous improvement activities Identifying, raising and implementing solutions to safety, quality and production problems Benefits: Overtime is also available at a 25% enhancement rate during the week and a 60% enhancement rate at the weekend. Enhanced Pension scheme- up to 14% combined Flexible working pattern including working from home/ flexible start and finish times 25 holiday days plus bank holidays- 26 days after 5 years service/ 27 days after 10 years service Shared Incentive Plan Employee Assistance Programme Cycle to Work Scheme Life Assurance (you and your spouse/ partner)- 6 x salary Ill Health Income Protection/ Private Medical Insurance- 50% of salary About You: Essential: A time served mechanical engineering apprenticeship in a manufacturing environment (minimum NVQ Level 3) Experience of working within a fast paced production environment whilst conducting planned maintenance work Experience in the setting and operating of manufacturing plant and equipment Experienced in fault finding with root cause, corrective and preventative activities High volume precision skills or a Tool change/ Machine setup background Desirable: Basic understanding of Statistical Process Control (SPC) Experience with pneumatic and automated systems Experience in blow moulding would be highly desirable You must be eligible to apply for SC clearance and, therefore, must hold a British passport and have lived and worked in the UK for the past 5 years About Aeropeople: Whether you re looking for your next job or searching out the next superstar to join your team Aeropeople s expertise and experience is entrenched in the aerospace, aviation, engineering, motorsport, automotive, and defence industries. We have the insight and know-how at both a local and international level to help bring people and businesses together, saving time and energy. Our capability is validated through our Engineering Services division encompassing Aircraft Line Maintenance services and Continuing Airworthiness Maintenance Organisation (CAMO), combined with our Aviation Training division offering technical training aircraft courses. During registration, please let us know where you are currently located or which locations you would consider taking a position in, required salary and notice period. For the latest news, events and jobs please search Aeropeople Ltd on LinkedIn and Facebook for our latest jobs
Precision Fitter Crafting Critical Aircraft Components Location: Bedfordshire, UK (Near Bedford) Position: Precision Fitter (Design and Manufacture) Are you a highly motivated and detail-oriented Fitter with expertise in precision assembly and high-level craftsmanship? Do you want your skills to directly contribute to groundbreaking aerodynamic research for the global aerospace and defence sector? My client is the UK's leading independent high-speed transonic testing facility. They specialize in crafting intricate, one-off components for scaled-down models of military and civilian aircraft. These models are critical tools used to measure forces and pressures in their on-site wind tunnel. This role requires extreme precision and care. If you are a team player with exceptional manual dexterity and a strong technical background, my client wants you on their successful and established precision manufacturing team. Why Join This Team? Impactful Work: Directly contribute to critical aerodynamic research for global aerospace and defence leaders. Premium Salary: Earn between £33,000 and £40,000 per year, depending on your experience. Great Work-Life Balance: Enjoy a stable full-time, 38-hour work week with a consistent Monday to Friday shift pattern: 7:00 am 3:06 pm. (Contract will include possible shift work 6-2pm & 2-10pm) Excellent Benefits: Permanent opportunity with benefits including a competitive salary, generous pension scheme, private health insurance, free parking, and 26 days annual leave plus Bank Holidays (which increases after 5 years' service). What You'll Be Doing (Key Responsibilities) This is a varied and demanding role, focusing on the final assembly and precise finishing of high-value components. Precision Fitting: Carry out all aspects of fitting activity, including: Hand working surfaces to remove machine marks. Blending component joint lines to remove steps/gaps. Fitting precision components and assembling models. Installing pressure tubing. Team Support: When qualified, support on-the-job training and provide guidance to less experienced staff. What You'll Bring (Essential Skills & Experience) My client is looking for a professional with a mix of technical training, craftmanship, and attention to detail. Qualifications: You must have an NVQ and/or BTEC in Mechanical Engineering, Manufacturing Engineering, Metalworking, or Fabrication, OR be a served apprentice in model making, tool making, or fitting. Technical Acumen: Demonstrable experience in manual and powered tools (lathes, grinder, drills). Ability to read and interpret technical drawings or CAD design. Solid understanding of other skills like CNC machining, turning, grinding, EDM wiring/plunge, and jig boring. Core Competencies: Knowledge of metal properties and safe handling of precious materials. High attention to detail and ability to work independently and as part of a team. Security Requirement: The successful candidate must satisfy security clearance requirements, including the last 5 years of continual UK residency. Ready to apply your precision skills to the world's most advanced aircraft models? Apply now!
Oct 07, 2025
Full time
Precision Fitter Crafting Critical Aircraft Components Location: Bedfordshire, UK (Near Bedford) Position: Precision Fitter (Design and Manufacture) Are you a highly motivated and detail-oriented Fitter with expertise in precision assembly and high-level craftsmanship? Do you want your skills to directly contribute to groundbreaking aerodynamic research for the global aerospace and defence sector? My client is the UK's leading independent high-speed transonic testing facility. They specialize in crafting intricate, one-off components for scaled-down models of military and civilian aircraft. These models are critical tools used to measure forces and pressures in their on-site wind tunnel. This role requires extreme precision and care. If you are a team player with exceptional manual dexterity and a strong technical background, my client wants you on their successful and established precision manufacturing team. Why Join This Team? Impactful Work: Directly contribute to critical aerodynamic research for global aerospace and defence leaders. Premium Salary: Earn between £33,000 and £40,000 per year, depending on your experience. Great Work-Life Balance: Enjoy a stable full-time, 38-hour work week with a consistent Monday to Friday shift pattern: 7:00 am 3:06 pm. (Contract will include possible shift work 6-2pm & 2-10pm) Excellent Benefits: Permanent opportunity with benefits including a competitive salary, generous pension scheme, private health insurance, free parking, and 26 days annual leave plus Bank Holidays (which increases after 5 years' service). What You'll Be Doing (Key Responsibilities) This is a varied and demanding role, focusing on the final assembly and precise finishing of high-value components. Precision Fitting: Carry out all aspects of fitting activity, including: Hand working surfaces to remove machine marks. Blending component joint lines to remove steps/gaps. Fitting precision components and assembling models. Installing pressure tubing. Team Support: When qualified, support on-the-job training and provide guidance to less experienced staff. What You'll Bring (Essential Skills & Experience) My client is looking for a professional with a mix of technical training, craftmanship, and attention to detail. Qualifications: You must have an NVQ and/or BTEC in Mechanical Engineering, Manufacturing Engineering, Metalworking, or Fabrication, OR be a served apprentice in model making, tool making, or fitting. Technical Acumen: Demonstrable experience in manual and powered tools (lathes, grinder, drills). Ability to read and interpret technical drawings or CAD design. Solid understanding of other skills like CNC machining, turning, grinding, EDM wiring/plunge, and jig boring. Core Competencies: Knowledge of metal properties and safe handling of precious materials. High attention to detail and ability to work independently and as part of a team. Security Requirement: The successful candidate must satisfy security clearance requirements, including the last 5 years of continual UK residency. Ready to apply your precision skills to the world's most advanced aircraft models? Apply now!
We are currently recruiting Aviation Security Officer to work at Farnborough Airport. Full time permanent position - working 4 days on, 4 days off, 4 nights on. £12.48 per hour CTC and DBS checks required for all potential candidates. Your Time at Work Working in Farnborough Airport as part of a team to deliver great customer service and aviation security to all our customers. You will be part of a dynamic team responsible for aircraft protection, Aircraft Searches, baggage Search, passengers Search where required. - Provide great customer service to passengers and customers - Report all security incidents and concerns to the security supervisor - Work positively and effectively with all team members and other airport and airline colleagues - Comply with training, security regulations and G4S is company policies and procedures - Work safely at all times and in line with G4S is safety standards, policies and procedures - Always act professionally, dress smartly and be an excellent timekeeper - Complete any reasonable tasks that are required by the company / Line manager. - You will be an energetic and professional team player who can work to demanding timescales to ensure that flights depart on time. You will be provided with the necessary training and uniform so that you can confidently carry out the role in line with security regulations and G4S is company policies and procedures. Our Perfect Worker To be considered for employment with G4S in this role you must be able to meet the following minimum requirements: - Unrestricted right to work full time in the UK for a minimum period of 12 months. - Must be a UK resident for the last 3 years. - Be fluent in spoken and written English. - Good customer service/communicating skills. - Must be able to pass the CRC check. - Must be able to pass all required training. - Have a five year checkable employment history or be able to produce documentary evidence of any period of unemployment, self- employment or full and part time education during that period. - Physical requirements include being able to be on their feet for extended periods of time, plus being able to work in outdoor weather environments. Key Information and Benefits - Workplace pension scheme - Life assurance benefit - Contributory Healthcare Scheme - Eye care vouchers - Employee Discount Schemes - Progression, training & development opportunities - Refer a friend scheme - Free uniform provided - Overtime paid at normal rate G4S is a recognised Disability Confident Leader Employer, committed to fostering an inclusive workplace where everyone can thrive. We prioritise accessibility, support, and opportunity for all employees. Join our diverse and empowering team today! About Staffline Staffline are working in Partnership with G4S, providing a recruitment solution for security roles. Please note that our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change. This job advert may not be copied, imitated or used, in whole or in part, by third-party websites, without prior written consent from Staffline.
Oct 07, 2025
Full time
We are currently recruiting Aviation Security Officer to work at Farnborough Airport. Full time permanent position - working 4 days on, 4 days off, 4 nights on. £12.48 per hour CTC and DBS checks required for all potential candidates. Your Time at Work Working in Farnborough Airport as part of a team to deliver great customer service and aviation security to all our customers. You will be part of a dynamic team responsible for aircraft protection, Aircraft Searches, baggage Search, passengers Search where required. - Provide great customer service to passengers and customers - Report all security incidents and concerns to the security supervisor - Work positively and effectively with all team members and other airport and airline colleagues - Comply with training, security regulations and G4S is company policies and procedures - Work safely at all times and in line with G4S is safety standards, policies and procedures - Always act professionally, dress smartly and be an excellent timekeeper - Complete any reasonable tasks that are required by the company / Line manager. - You will be an energetic and professional team player who can work to demanding timescales to ensure that flights depart on time. You will be provided with the necessary training and uniform so that you can confidently carry out the role in line with security regulations and G4S is company policies and procedures. Our Perfect Worker To be considered for employment with G4S in this role you must be able to meet the following minimum requirements: - Unrestricted right to work full time in the UK for a minimum period of 12 months. - Must be a UK resident for the last 3 years. - Be fluent in spoken and written English. - Good customer service/communicating skills. - Must be able to pass the CRC check. - Must be able to pass all required training. - Have a five year checkable employment history or be able to produce documentary evidence of any period of unemployment, self- employment or full and part time education during that period. - Physical requirements include being able to be on their feet for extended periods of time, plus being able to work in outdoor weather environments. Key Information and Benefits - Workplace pension scheme - Life assurance benefit - Contributory Healthcare Scheme - Eye care vouchers - Employee Discount Schemes - Progression, training & development opportunities - Refer a friend scheme - Free uniform provided - Overtime paid at normal rate G4S is a recognised Disability Confident Leader Employer, committed to fostering an inclusive workplace where everyone can thrive. We prioritise accessibility, support, and opportunity for all employees. Join our diverse and empowering team today! About Staffline Staffline are working in Partnership with G4S, providing a recruitment solution for security roles. Please note that our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change. This job advert may not be copied, imitated or used, in whole or in part, by third-party websites, without prior written consent from Staffline.
Ernest Gordon Recruitment Limited
Sudbury, Suffolk
CAD Technician (SolidWorks/ Aerospace/ MOD) Sudbury Up to £35,000 + Training + Career Progression + Working on MOD & Commercial Aircraft Projects + Great Team Culture Are you a CAD Technician or similar with experience using SolidWorks, looking for an exciting role where you'll be designing components for real aircraft including projects for the MOD and leading commercial airlines while joining a close-knit, fast-growing aerospace company where you'll get hands-on experience, full training, and the chance to progress your career in a great industry? Do you want the opportunity to join a leading name in aerospace technology, working at the cutting edge of aircraft design and component support? The company has grown rapidly to become one of the UK's most trusted providers of aircraft rotables, supporting over 100 airlines in 30+ countries On offer is a fantastic opportunity to join a fun, passionate, and collaborative engineering team where your designs help aircraft get in the sky. You'll be part of a company that invests in its people, encourages new ideas, and offers genuine progression and training in aerospace design and development. With exciting MOD and civil aviation projects, no two days will ever be the same. In the role, you'll create and modify detailed 3D models and technical drawings using SolidWorks, working closely with senior engineers and designers to bring projects from concept to completion. You'll ensure precision and compliance in every drawing, assist in documentation and specifications, and be part of a high-energy team that thrives on solving engineering challenges. This is your chance to use your technical creativity to make a real-world impact in the aerospace industry. This role would suit a CAD Technician or similar with experience using SolidWorks, looking for an exciting role where you'll be designing components for real aircraft including projects for the MOD and leading commercial airlines while joining a close-knit, fast-growing aerospace company where you'll get hands-on experience, full training, and the chance to progress your career in a great industry. The Role: Design and produce 3D models and detailed technical drawings using SolidWorks. Collaborate with engineers and project teams on aircraft component design. Work on real MOD and commercial aircraft projects with full training and support. The Person: CAD Technician or similar SolidWorks experience Based in Sudbury or easily commutable to Reference Number: BBBH22078 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Oct 07, 2025
Full time
CAD Technician (SolidWorks/ Aerospace/ MOD) Sudbury Up to £35,000 + Training + Career Progression + Working on MOD & Commercial Aircraft Projects + Great Team Culture Are you a CAD Technician or similar with experience using SolidWorks, looking for an exciting role where you'll be designing components for real aircraft including projects for the MOD and leading commercial airlines while joining a close-knit, fast-growing aerospace company where you'll get hands-on experience, full training, and the chance to progress your career in a great industry? Do you want the opportunity to join a leading name in aerospace technology, working at the cutting edge of aircraft design and component support? The company has grown rapidly to become one of the UK's most trusted providers of aircraft rotables, supporting over 100 airlines in 30+ countries On offer is a fantastic opportunity to join a fun, passionate, and collaborative engineering team where your designs help aircraft get in the sky. You'll be part of a company that invests in its people, encourages new ideas, and offers genuine progression and training in aerospace design and development. With exciting MOD and civil aviation projects, no two days will ever be the same. In the role, you'll create and modify detailed 3D models and technical drawings using SolidWorks, working closely with senior engineers and designers to bring projects from concept to completion. You'll ensure precision and compliance in every drawing, assist in documentation and specifications, and be part of a high-energy team that thrives on solving engineering challenges. This is your chance to use your technical creativity to make a real-world impact in the aerospace industry. This role would suit a CAD Technician or similar with experience using SolidWorks, looking for an exciting role where you'll be designing components for real aircraft including projects for the MOD and leading commercial airlines while joining a close-knit, fast-growing aerospace company where you'll get hands-on experience, full training, and the chance to progress your career in a great industry. The Role: Design and produce 3D models and detailed technical drawings using SolidWorks. Collaborate with engineers and project teams on aircraft component design. Work on real MOD and commercial aircraft projects with full training and support. The Person: CAD Technician or similar SolidWorks experience Based in Sudbury or easily commutable to Reference Number: BBBH22078 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Our client has a fantastic opportunity for a Flight School Coordinator to join them on a permanent basis. As a Flight School Coordinator, you'll be the hub that keeps training operations running smoothly, connecting students, instructors, aircraft, engineering, compliance, and the wider airfield team. Position - Flight School Coordinator Location - Staffordshire Shift Pattern - 5 days onsite Salary - Discussed upon application Reports To - Head of Training Key Responsibilities: Scheduling & Coordination Own and manage the daily flying schedule for students, instructors, and aircraft. Coordinate closely with the engineering team to plan aircraft going into and coming out of maintenance, minimising downtime and disruption to training. Liaise across multiple departments - engineering, operations, compliance, and management - to keep schedules accurate and achievable. Keep operations running on time and adjust quickly when plans change due to weather, maintenance, or availability issues. Student Experience Be the friendly, professional first point of contact for all students. Support students from first enquiry through to completion of training, ensuring they feel informed, supported, and valued. Communicate clearly and promptly on bookings, changes, and course requirements. Operations, Reporting & Compliance Maintain accurate training and operational records to meet CAA requirements. Ensure all scheduling and booking data in systems is accurate and up to date. Prepare weekly summaries for the Head of Training on key metrics such as aircraft utilisation, lesson completion, and cancellations. Support compliance checks and prepare for internal and external audits. Process & Growth Identify and implement ways to streamline scheduling, booking, and admin workflows. Look for opportunities to improve efficiency and enhance the student journey. Actively contribute ideas to help the flight school scale successfully. Take ownership of your area and grow with the role as the school expands. What We're Looking For Essential Experience in logistics, scheduling, or transport operations where coordination and resource planning are key. Strong organisational skills with the ability to juggle multiple priorities. Excellent customer service skills - professional, approachable, and solution-focused. Confident communicator who can build good relationships with students, instructors, and internal teams. Proven ability to problem-solve and adapt quickly under pressure. IT savvy, with experience using scheduling or operational systems. Desirable Experience in aviation, education, or another regulated sector. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Georgia Hannay at Line Up Aviation. Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Oct 07, 2025
Full time
Our client has a fantastic opportunity for a Flight School Coordinator to join them on a permanent basis. As a Flight School Coordinator, you'll be the hub that keeps training operations running smoothly, connecting students, instructors, aircraft, engineering, compliance, and the wider airfield team. Position - Flight School Coordinator Location - Staffordshire Shift Pattern - 5 days onsite Salary - Discussed upon application Reports To - Head of Training Key Responsibilities: Scheduling & Coordination Own and manage the daily flying schedule for students, instructors, and aircraft. Coordinate closely with the engineering team to plan aircraft going into and coming out of maintenance, minimising downtime and disruption to training. Liaise across multiple departments - engineering, operations, compliance, and management - to keep schedules accurate and achievable. Keep operations running on time and adjust quickly when plans change due to weather, maintenance, or availability issues. Student Experience Be the friendly, professional first point of contact for all students. Support students from first enquiry through to completion of training, ensuring they feel informed, supported, and valued. Communicate clearly and promptly on bookings, changes, and course requirements. Operations, Reporting & Compliance Maintain accurate training and operational records to meet CAA requirements. Ensure all scheduling and booking data in systems is accurate and up to date. Prepare weekly summaries for the Head of Training on key metrics such as aircraft utilisation, lesson completion, and cancellations. Support compliance checks and prepare for internal and external audits. Process & Growth Identify and implement ways to streamline scheduling, booking, and admin workflows. Look for opportunities to improve efficiency and enhance the student journey. Actively contribute ideas to help the flight school scale successfully. Take ownership of your area and grow with the role as the school expands. What We're Looking For Essential Experience in logistics, scheduling, or transport operations where coordination and resource planning are key. Strong organisational skills with the ability to juggle multiple priorities. Excellent customer service skills - professional, approachable, and solution-focused. Confident communicator who can build good relationships with students, instructors, and internal teams. Proven ability to problem-solve and adapt quickly under pressure. IT savvy, with experience using scheduling or operational systems. Desirable Experience in aviation, education, or another regulated sector. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Georgia Hannay at Line Up Aviation. Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Job Description Apron Operative (Stands) Location: Glasgow Airport Employment Type : Ad-hoc / Call-out basis Shift Pattern : 12-hour shifts (minimum 8 hours paid if stood down) Rates: Competitive PAYE Umbrella or Ltd Company (self-employed), premium rates apply About Us Logic 360 Ltd is a trusted workforce partner to some of the UK s busiest airports, specialising in winter resilience and emergency response services. We have been supporting Glasgow Airport for over six years, ensuring that critical airfield operations continue safely during adverse weather conditions. Role Overview We are looking for Apron Operatives to join our Winter Resilience Team at Glasgow Airport. This role focuses on managing aircraft stands and apron areas, ensuring snow and ice are cleared to keep flights moving safely. A standard UK driving licence is sufficient. You will be trained to operate equipment specific to apron and stand operations. We operate a trained pool of operatives who are called upon during live events. If you have offered your availability, you must be ready to respond. When a call-out is triggered, shifts are allocated on a first-come, first-served basis to those who reply. Phones must be kept on loud and charged whenever snow is forecast. This role is particularly suited to people who are self-employed and manage their own workload, or those on a 4-on / 4-off shift pattern looking for additional income during the winter season. Key Responsibilities Operate apron-based equipment to clear snow and ice from aircraft stands and apron areas. Carry out safety checks and routine maintenance on allocated vehicles/equipment. Work collaboratively with the airport s operations and control teams. Follow strict safety procedures and maintain full compliance with CAA/airport regulations. Manage radio communication effectively and accurately during live operations. Keep your phone on loud when snow is forecast, respond promptly to call-outs, and arrive at the airport within one hour when allocated. Provide accurate records/logs as required by airport procedures. Requirements Full, valid UK driving licence with no more than 6 penalty points. Live within a 45-minute commute of Glasgow Airport. Provide a 5-year checkable history (employment, self-employment, education, or benefit claims) and proof of right to work in the UK. Be physically fit and able to work long shifts in cold, demanding conditions. Be flexible and able to work: days, nights, weekends, and public holidays. No unspent criminal convictions (disqualifying offences will prevent Airside Pass approval). Training & Compliance Operational Training 2 full days (equipment and procedures). GSAT (General Security Awareness Training) online, required for pass application. ASAT (Airside Safety Awareness Training) required once ASP is approved. Fire Safety Training completed once ASP is approved. Security interview and full referencing process completed by our Compliance Team. What We Offer Full Airside Pass (valid for 5 years). Premium pay rates and minimum 8-hour call-out payments. Free parking at the airport. Paid training and full support from our Compliance and Account Management Team. Opportunities to join the Rapid Response Team (RRT) for critical deployments. Important Information You will be part of a trained pool of operatives. If you have offered availability, we expect you to be ready to respond. Shifts are allocated on a first-come, first-served basis to those who reply to the call-out. Keep your phone on loud and charged whenever snow is anticipated. You must be able to arrive at the airport within one hour of being confirmed for a shift. Failure to honour confirmed availability may affect future work allocations. Equal Opportunity Employer: Logic 360 Ltd celebrates diversity and is committed to creating an inclusive environment for all employees. Please note, Logic 360 Ltd is a Recruitment Agency and Employment Business recruiting on behalf of our client.
Oct 07, 2025
Contractor
Job Description Apron Operative (Stands) Location: Glasgow Airport Employment Type : Ad-hoc / Call-out basis Shift Pattern : 12-hour shifts (minimum 8 hours paid if stood down) Rates: Competitive PAYE Umbrella or Ltd Company (self-employed), premium rates apply About Us Logic 360 Ltd is a trusted workforce partner to some of the UK s busiest airports, specialising in winter resilience and emergency response services. We have been supporting Glasgow Airport for over six years, ensuring that critical airfield operations continue safely during adverse weather conditions. Role Overview We are looking for Apron Operatives to join our Winter Resilience Team at Glasgow Airport. This role focuses on managing aircraft stands and apron areas, ensuring snow and ice are cleared to keep flights moving safely. A standard UK driving licence is sufficient. You will be trained to operate equipment specific to apron and stand operations. We operate a trained pool of operatives who are called upon during live events. If you have offered your availability, you must be ready to respond. When a call-out is triggered, shifts are allocated on a first-come, first-served basis to those who reply. Phones must be kept on loud and charged whenever snow is forecast. This role is particularly suited to people who are self-employed and manage their own workload, or those on a 4-on / 4-off shift pattern looking for additional income during the winter season. Key Responsibilities Operate apron-based equipment to clear snow and ice from aircraft stands and apron areas. Carry out safety checks and routine maintenance on allocated vehicles/equipment. Work collaboratively with the airport s operations and control teams. Follow strict safety procedures and maintain full compliance with CAA/airport regulations. Manage radio communication effectively and accurately during live operations. Keep your phone on loud when snow is forecast, respond promptly to call-outs, and arrive at the airport within one hour when allocated. Provide accurate records/logs as required by airport procedures. Requirements Full, valid UK driving licence with no more than 6 penalty points. Live within a 45-minute commute of Glasgow Airport. Provide a 5-year checkable history (employment, self-employment, education, or benefit claims) and proof of right to work in the UK. Be physically fit and able to work long shifts in cold, demanding conditions. Be flexible and able to work: days, nights, weekends, and public holidays. No unspent criminal convictions (disqualifying offences will prevent Airside Pass approval). Training & Compliance Operational Training 2 full days (equipment and procedures). GSAT (General Security Awareness Training) online, required for pass application. ASAT (Airside Safety Awareness Training) required once ASP is approved. Fire Safety Training completed once ASP is approved. Security interview and full referencing process completed by our Compliance Team. What We Offer Full Airside Pass (valid for 5 years). Premium pay rates and minimum 8-hour call-out payments. Free parking at the airport. Paid training and full support from our Compliance and Account Management Team. Opportunities to join the Rapid Response Team (RRT) for critical deployments. Important Information You will be part of a trained pool of operatives. If you have offered availability, we expect you to be ready to respond. Shifts are allocated on a first-come, first-served basis to those who reply to the call-out. Keep your phone on loud and charged whenever snow is anticipated. You must be able to arrive at the airport within one hour of being confirmed for a shift. Failure to honour confirmed availability may affect future work allocations. Equal Opportunity Employer: Logic 360 Ltd celebrates diversity and is committed to creating an inclusive environment for all employees. Please note, Logic 360 Ltd is a Recruitment Agency and Employment Business recruiting on behalf of our client.
Air Personnel are delighted to be supporting their client based at Kidlington Oxford Airport for the role of Compliance and Safety Officer The client operate, maintain, refurbish and charter aircraft from the base at Oxford airport. In this role you will be part of the AOC Compliance and Safety Team covering Operations and CAMO. We are looking to fill this role with someone who is as enthusiastic about Compliance and Safety principles as we are, who takes pride in their eye for detail and who can handle data and trend analysis to aid our management systems. We work with 2-REG, UKCAA, BCAA, CAACI, FAA and EASA, therefore this position presents a unique opportunity to cultivate expertise in auditing and safety investigation from various regulatory backgrounds. Responsibilities of the Compliance and Safety Officer : Supporting a Just Culture through promotional initiatives such as the quarterly newsletter and contributing innovative ideas to bolster engagement and awareness. Taking charge of the meeting module on Centrik for Safety and Compliance owned meetings, and taking and distributing minutes and action points. Collecting data produced by our Centrik system for monthly analysis to measure against Safety Performance Indicators to keep us on track. Assisting with Management of Changes to ensure actions are being completed to deadline and to support new Management of Changes. Helping to create self-audit and third party contractor checklists and surveys. Following specialised training, building and completing internal compliance audits. Completing safety case classifications and supporting the investigation process. Supporting with the creation and discussion of risk assessments using the ARMS methodology using trend analysis obtained from findings and safety cases. Collaborating closely with the Compliance Manager and Safety Manager to refine and fortify the Compliance and safety management systems. Actively fostering a culture of continuous learning by empowering colleagues to navigate the compliance and safety system Centrik effectively and to provide guidance on any related concerns. Any additional tasks assigned by the Compliance Manager or Safety Manager, contributing to the collective success of the team. Essential Competencies/Skills: An aptitude for learning and absorbing compliance and safety aviation principles and regulation. Strong organisation skills and ability to prioritise and managing multiple responsibilities simultaneously. Proficient interpersonal skills with the ability to build and maintain positive working relationships. Strong analytical approach with excellent IT skills. Proactive disposition with a genuine passion for the aviation industry. This is an excellent opportunity to join a great team! Please call Michelle for further details or apply with your CV
Oct 07, 2025
Full time
Air Personnel are delighted to be supporting their client based at Kidlington Oxford Airport for the role of Compliance and Safety Officer The client operate, maintain, refurbish and charter aircraft from the base at Oxford airport. In this role you will be part of the AOC Compliance and Safety Team covering Operations and CAMO. We are looking to fill this role with someone who is as enthusiastic about Compliance and Safety principles as we are, who takes pride in their eye for detail and who can handle data and trend analysis to aid our management systems. We work with 2-REG, UKCAA, BCAA, CAACI, FAA and EASA, therefore this position presents a unique opportunity to cultivate expertise in auditing and safety investigation from various regulatory backgrounds. Responsibilities of the Compliance and Safety Officer : Supporting a Just Culture through promotional initiatives such as the quarterly newsletter and contributing innovative ideas to bolster engagement and awareness. Taking charge of the meeting module on Centrik for Safety and Compliance owned meetings, and taking and distributing minutes and action points. Collecting data produced by our Centrik system for monthly analysis to measure against Safety Performance Indicators to keep us on track. Assisting with Management of Changes to ensure actions are being completed to deadline and to support new Management of Changes. Helping to create self-audit and third party contractor checklists and surveys. Following specialised training, building and completing internal compliance audits. Completing safety case classifications and supporting the investigation process. Supporting with the creation and discussion of risk assessments using the ARMS methodology using trend analysis obtained from findings and safety cases. Collaborating closely with the Compliance Manager and Safety Manager to refine and fortify the Compliance and safety management systems. Actively fostering a culture of continuous learning by empowering colleagues to navigate the compliance and safety system Centrik effectively and to provide guidance on any related concerns. Any additional tasks assigned by the Compliance Manager or Safety Manager, contributing to the collective success of the team. Essential Competencies/Skills: An aptitude for learning and absorbing compliance and safety aviation principles and regulation. Strong organisation skills and ability to prioritise and managing multiple responsibilities simultaneously. Proficient interpersonal skills with the ability to build and maintain positive working relationships. Strong analytical approach with excellent IT skills. Proactive disposition with a genuine passion for the aviation industry. This is an excellent opportunity to join a great team! Please call Michelle for further details or apply with your CV
Air Personnel are looking for a B1/2 Engineer for their client in Bournemouth. We are actively seeking talented B1 and B2 Licenced Aircraft Engineer to join our dynamic and progressive Engineering Team at our modern base facility in Bournemouth. This opportunity is to support a fleet of aircraft through a dedicated workforce understanding the need to deliver impeccable service in an active operational environment for our high-profile clients. As part of this role, you must be prepared to work flexibly as part of a team and as an integral part of the Group, possessing strong communication, organisation and leadership skills. To be considered for this position you will hold a UK CAA/EASA Part 66 B1 or B2 Licence, preferably with one of the following type ratings: Beechcraft King Air Cessna F406 VulcanAir P68 Preferred candidates will already hold one of the listed type ratings, however applicants with other similar type ratings will be considered as training and type courses may be provided. The successful candidate will join a long established and respected forward-thinking company that has a proven pedigree in career development within the organisation, with type and non-type training provided to develop your skills and capabilities. About us: The client is a hugely diverse business that offers much more than perhaps its name would suggest. Yes, we fly but we also save lives, provide mission critical intelligence, and build systems that deliver decisive advantage. With operations in the UK, US, Middle East and Hong Kong a career with us can offer travel, personal growth opportunities and the ability for long-term progression in a fast paced and dynamic service industry. Responsibilities: Responsible for the successful completion of all allocated, planned and ad-hoc maintenance tasks Ensure the completion of scheduled customer order requirements when acting as supervising, certifying engineer for a given input Responsible for the management of and performance/quality of performed works in compliance with applicable company process and procedures Ensure correct compliance with applicable regulatory requirements Maintain the required engineering licence and applicable type rating as required to perform duties and be responsible for ensuring licences and type ratings do not lapse and are kept up to date Accountable for providing professional communication with customers and contacts as required Individual responsibility for booking accurate, and consistent timekeeping in applicable software system Skills, Qualifications and Experience required: Essential A UK CAA Part 66 Licence Category B1 or B2 Previous aircraft base maintenance experience with a wide knowledge and skill range in servicing, inspection repair and modifications Satisfactory recency as required for issue of applicable certifying approval Full UK Driving licence Advantageous Hold the type rating for Beechcraft King Air / F406 / P68R In addition to a Competitive Salary, we will offer you: Great Work-Life Balance with a 5-5-4 Shift Pattern Competitive Group Pension Scheme Life Assurance Income Protection Travel Insurance Private Healthcare (after successful passing of probation) Free Car Parking 2 Paid Volunteering Days each calendar year (subject to line manager approval) If you would like further details please call Michelle or email your CV Investment in Training, Qualifications and Professional Development
Oct 07, 2025
Full time
Air Personnel are looking for a B1/2 Engineer for their client in Bournemouth. We are actively seeking talented B1 and B2 Licenced Aircraft Engineer to join our dynamic and progressive Engineering Team at our modern base facility in Bournemouth. This opportunity is to support a fleet of aircraft through a dedicated workforce understanding the need to deliver impeccable service in an active operational environment for our high-profile clients. As part of this role, you must be prepared to work flexibly as part of a team and as an integral part of the Group, possessing strong communication, organisation and leadership skills. To be considered for this position you will hold a UK CAA/EASA Part 66 B1 or B2 Licence, preferably with one of the following type ratings: Beechcraft King Air Cessna F406 VulcanAir P68 Preferred candidates will already hold one of the listed type ratings, however applicants with other similar type ratings will be considered as training and type courses may be provided. The successful candidate will join a long established and respected forward-thinking company that has a proven pedigree in career development within the organisation, with type and non-type training provided to develop your skills and capabilities. About us: The client is a hugely diverse business that offers much more than perhaps its name would suggest. Yes, we fly but we also save lives, provide mission critical intelligence, and build systems that deliver decisive advantage. With operations in the UK, US, Middle East and Hong Kong a career with us can offer travel, personal growth opportunities and the ability for long-term progression in a fast paced and dynamic service industry. Responsibilities: Responsible for the successful completion of all allocated, planned and ad-hoc maintenance tasks Ensure the completion of scheduled customer order requirements when acting as supervising, certifying engineer for a given input Responsible for the management of and performance/quality of performed works in compliance with applicable company process and procedures Ensure correct compliance with applicable regulatory requirements Maintain the required engineering licence and applicable type rating as required to perform duties and be responsible for ensuring licences and type ratings do not lapse and are kept up to date Accountable for providing professional communication with customers and contacts as required Individual responsibility for booking accurate, and consistent timekeeping in applicable software system Skills, Qualifications and Experience required: Essential A UK CAA Part 66 Licence Category B1 or B2 Previous aircraft base maintenance experience with a wide knowledge and skill range in servicing, inspection repair and modifications Satisfactory recency as required for issue of applicable certifying approval Full UK Driving licence Advantageous Hold the type rating for Beechcraft King Air / F406 / P68R In addition to a Competitive Salary, we will offer you: Great Work-Life Balance with a 5-5-4 Shift Pattern Competitive Group Pension Scheme Life Assurance Income Protection Travel Insurance Private Healthcare (after successful passing of probation) Free Car Parking 2 Paid Volunteering Days each calendar year (subject to line manager approval) If you would like further details please call Michelle or email your CV Investment in Training, Qualifications and Professional Development
Our client is a world leader in the design, development, manufacture and operation of advanced military target systems for live-fire training exercises and weapons test and evaluation. As a Configuration Manager you will be responsible for delivering, maintaining and improving high quality technical configuration solutions for a range of state-of-the-art Unmanned Aerial and Surface Target Systems. Responsibilities: Product configuration management plans, processes and procedure ownership Product engineering change control, process and procedure ownership Management and leadership of the Engineering Configuration team Configuration status records, processes and procedure ownership Identifying current industry best Configuration Management practices to support and develop new procedures Essential experience: You must have previous experience within configuration management The Configuration Manager must also have leadership experience Our Benefits Matched contribution pension scheme, with life assurance Generous holiday allowance, with the option to purchase additional days Options to join Health Cash Plan, Private Medical Insurance and Dental Insurance Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more We are proud to support the Armed Forces community by honouring the Armed Forces Covenant and maintaining our Gold Award standard in the Defence Employer Recognition Scheme Volunteering Opportunities - helping charities and local community. NB. Applicants must hold/or be eligible of obtaining UK Security Clearance at a minimum level of SC.
Oct 07, 2025
Full time
Our client is a world leader in the design, development, manufacture and operation of advanced military target systems for live-fire training exercises and weapons test and evaluation. As a Configuration Manager you will be responsible for delivering, maintaining and improving high quality technical configuration solutions for a range of state-of-the-art Unmanned Aerial and Surface Target Systems. Responsibilities: Product configuration management plans, processes and procedure ownership Product engineering change control, process and procedure ownership Management and leadership of the Engineering Configuration team Configuration status records, processes and procedure ownership Identifying current industry best Configuration Management practices to support and develop new procedures Essential experience: You must have previous experience within configuration management The Configuration Manager must also have leadership experience Our Benefits Matched contribution pension scheme, with life assurance Generous holiday allowance, with the option to purchase additional days Options to join Health Cash Plan, Private Medical Insurance and Dental Insurance Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more We are proud to support the Armed Forces community by honouring the Armed Forces Covenant and maintaining our Gold Award standard in the Defence Employer Recognition Scheme Volunteering Opportunities - helping charities and local community. NB. Applicants must hold/or be eligible of obtaining UK Security Clearance at a minimum level of SC.
CBSbutler Holdings Limited trading as CBSbutler
Carterton, Oxfordshire
Role Title: Flight Data Analyst Rate: 170 per day inside ir35 Duration: 2 years Location: RAF Brize Norton, Oxfordshire On site 5 days/Shift pattern (weekends, evenings, and bank holidays) remote work is not possible for this role Job Description: Support A400M maintenance by capturing and transferring maintenance information into the Maintenance Data System (MDS) generated by Part 145 during missions. This includes the period before aircraft departure until its return to the base, with weekly reports produced and sent to Part 145 to ensure all maintenance activities meet airworthiness standards. Key Responsibilities: Enter retrospective data on MDS, including: Closing work orders Entering SRPs date and time as signed off by engineers Creating and closing logbook entries Opening ADFs and/or OOPs Inputting flight ground test data Deferring logbook entry work orders Introducing servicing reports into MDS system Performing equipment transactions Send weekly reports to Part 145 with the maintenance plan Support essential maintenance activities for live flight events, including on-call responsibilities during evenings, weekends, and bank holidays, in a 24/7 rolling rota. Essential Skills and Qualifications Proficient in Microsoft Office Methodical attention to detail Teamwork skills Ability to work under pressure Quick learner Administrative/technical background desirable Must hold a driving license Good report writing skills Desirable Skills and Qualifications Experience with MDS Aircraft maintenance experience, including Part 145 and Part M, is advantageous Experience with information or data management software tools Training Provided Comprehensive training will be provided on the use of the Maintenance Data System (MDS) On-the-job training and shadowing experienced team members
Oct 06, 2025
Contractor
Role Title: Flight Data Analyst Rate: 170 per day inside ir35 Duration: 2 years Location: RAF Brize Norton, Oxfordshire On site 5 days/Shift pattern (weekends, evenings, and bank holidays) remote work is not possible for this role Job Description: Support A400M maintenance by capturing and transferring maintenance information into the Maintenance Data System (MDS) generated by Part 145 during missions. This includes the period before aircraft departure until its return to the base, with weekly reports produced and sent to Part 145 to ensure all maintenance activities meet airworthiness standards. Key Responsibilities: Enter retrospective data on MDS, including: Closing work orders Entering SRPs date and time as signed off by engineers Creating and closing logbook entries Opening ADFs and/or OOPs Inputting flight ground test data Deferring logbook entry work orders Introducing servicing reports into MDS system Performing equipment transactions Send weekly reports to Part 145 with the maintenance plan Support essential maintenance activities for live flight events, including on-call responsibilities during evenings, weekends, and bank holidays, in a 24/7 rolling rota. Essential Skills and Qualifications Proficient in Microsoft Office Methodical attention to detail Teamwork skills Ability to work under pressure Quick learner Administrative/technical background desirable Must hold a driving license Good report writing skills Desirable Skills and Qualifications Experience with MDS Aircraft maintenance experience, including Part 145 and Part M, is advantageous Experience with information or data management software tools Training Provided Comprehensive training will be provided on the use of the Maintenance Data System (MDS) On-the-job training and shadowing experienced team members
Job description Career change. Extra cash. Flexible Working. New Challenge. If you're looking for any of these, have you considered a role in an airport Verve Aviation are a leading Hospitality Agency based around the UK. We specialise in providing trained and professional staff to Manchester, Stansted, East Midlands and Edinburgh airports. We are looking for customer focused individuals who are looking for flexible work to build around their lives, not the other way around! Airport lounges offer a space for people to relax and prepare for their journey ahead. The customers can help themselves to food buffets and order drinks at the bar whilst overlooking the aircraft. What will I be doing? Kitchen Porters are responsible for ensuring a quality and stress-free airport experience. Roles include but are not limited to: using the pot wash machine to ensure equipment is clean brush and mop the kitchen Restocking plates Ensuring a clean working environment is maintained Providing exceptional customer service The ideal candidate will be a bright and bubbly individual with a genuine passion for customer service and strong work ethic. If you have a natural ability to get along with others, then this is the role for you! What do you need? MUST hold a valid passport to access the terminal building Be able to provide 5 years work, education and address history Proof of eligibility to work within the United Kingdom Flexibility to work a variety of shifts- it's a 24/7 business so ability to start as early as 3am is essential! Before joining us, it is essential that you understand our policy on uniform. This is what you may be expected to wear should you decide to complete your registration with Verve: Black Safety shoes Plain black socks Plain black trouser black polo shirt Please bear in mind our checks include, a criminal record check for residence within the United Kingdom, however if you have resided in another country from more than 6 months in the past 5 years, you will be responsible for obtaining a translated ( into English) criminal record check from any other country of residence at your own cost What do I get in return? A friendly and supportive office team Weekly pay Free parking when on shift Free Meal and drinks on shift Retailer discounts Ongoing training and development opportunities Ability to choose whichever days you want to work! Verve People are committed to being an Equal Opportunities employer, and do not discriminate against any candidate on the grounds of age, disability, sex, gender identity, sexual orientation, pregnancy and maternity, race, religion or belief, marriage and civil partnerships, or other applicable legally protected characteristics. INDAVI
Oct 06, 2025
Seasonal
Job description Career change. Extra cash. Flexible Working. New Challenge. If you're looking for any of these, have you considered a role in an airport Verve Aviation are a leading Hospitality Agency based around the UK. We specialise in providing trained and professional staff to Manchester, Stansted, East Midlands and Edinburgh airports. We are looking for customer focused individuals who are looking for flexible work to build around their lives, not the other way around! Airport lounges offer a space for people to relax and prepare for their journey ahead. The customers can help themselves to food buffets and order drinks at the bar whilst overlooking the aircraft. What will I be doing? Kitchen Porters are responsible for ensuring a quality and stress-free airport experience. Roles include but are not limited to: using the pot wash machine to ensure equipment is clean brush and mop the kitchen Restocking plates Ensuring a clean working environment is maintained Providing exceptional customer service The ideal candidate will be a bright and bubbly individual with a genuine passion for customer service and strong work ethic. If you have a natural ability to get along with others, then this is the role for you! What do you need? MUST hold a valid passport to access the terminal building Be able to provide 5 years work, education and address history Proof of eligibility to work within the United Kingdom Flexibility to work a variety of shifts- it's a 24/7 business so ability to start as early as 3am is essential! Before joining us, it is essential that you understand our policy on uniform. This is what you may be expected to wear should you decide to complete your registration with Verve: Black Safety shoes Plain black socks Plain black trouser black polo shirt Please bear in mind our checks include, a criminal record check for residence within the United Kingdom, however if you have resided in another country from more than 6 months in the past 5 years, you will be responsible for obtaining a translated ( into English) criminal record check from any other country of residence at your own cost What do I get in return? A friendly and supportive office team Weekly pay Free parking when on shift Free Meal and drinks on shift Retailer discounts Ongoing training and development opportunities Ability to choose whichever days you want to work! Verve People are committed to being an Equal Opportunities employer, and do not discriminate against any candidate on the grounds of age, disability, sex, gender identity, sexual orientation, pregnancy and maternity, race, religion or belief, marriage and civil partnerships, or other applicable legally protected characteristics. INDAVI
Job description Career change. Extra cash. Flexible Working. New Challenge. If you're looking for any of these, have you considered a role in an airport Verve People are a leading Hospitality Agency based around the UK. We specialise in providing trained and professional staff to Manchester, Stansted, East Midlands, Edinburgh airports. We are looking for customer focused individuals who are looking for flexible work to build around their lives, not the other way around! Airport lounges offer a space for people to relax and prepare for their journey ahead. The customers can help themselves to food buffets and order drinks at the bar whilst overlooking the aircraft. What will I be doing? You will create an atmosphere of excellence, ensuring guest satisfaction and following company standards. Dive in to a fast-paced kitchen environment. You will be doing stock rotation, contributing to food safety in the kitchen. Confidently cook menu. Prep food. Ensuring you work in a safe environment following all health and safety procedures What do you need? MUST hold a valid passport to access the terminal building Be able to provide 5 years work, education and address history Proof of eligibility to work within the United Kingdom Flexibility to work a variety of shifts- it's a 24/7 business so ability to start as early as 3am is essential! Early start means early finish Please bear in mind our checks include, a criminal record check for residence within the United Kingdom, however if you have resided in another country from more than 6 months in the past 5 years, you will be responsible for obtaining a translated ( into English) criminal record check from any other country of residence at your own cost What do I get in return? A friendly and supportive office team Weekly pay Free parking when on shift Retailer discounts Ongoing training and development opportunities Ability to choose whichever days you want to work Free meals and drink on shift Verve People are committed to being an Equal Opportunities employer, and do not discriminate against any candidate on the grounds of age, disability, sex, gender identity, sexual orientation, pregnancy and maternity, race, religion or belief, marriage and civil partnerships, or other applicable legally protected characteristics. INDAVI
Oct 06, 2025
Seasonal
Job description Career change. Extra cash. Flexible Working. New Challenge. If you're looking for any of these, have you considered a role in an airport Verve People are a leading Hospitality Agency based around the UK. We specialise in providing trained and professional staff to Manchester, Stansted, East Midlands, Edinburgh airports. We are looking for customer focused individuals who are looking for flexible work to build around their lives, not the other way around! Airport lounges offer a space for people to relax and prepare for their journey ahead. The customers can help themselves to food buffets and order drinks at the bar whilst overlooking the aircraft. What will I be doing? You will create an atmosphere of excellence, ensuring guest satisfaction and following company standards. Dive in to a fast-paced kitchen environment. You will be doing stock rotation, contributing to food safety in the kitchen. Confidently cook menu. Prep food. Ensuring you work in a safe environment following all health and safety procedures What do you need? MUST hold a valid passport to access the terminal building Be able to provide 5 years work, education and address history Proof of eligibility to work within the United Kingdom Flexibility to work a variety of shifts- it's a 24/7 business so ability to start as early as 3am is essential! Early start means early finish Please bear in mind our checks include, a criminal record check for residence within the United Kingdom, however if you have resided in another country from more than 6 months in the past 5 years, you will be responsible for obtaining a translated ( into English) criminal record check from any other country of residence at your own cost What do I get in return? A friendly and supportive office team Weekly pay Free parking when on shift Retailer discounts Ongoing training and development opportunities Ability to choose whichever days you want to work Free meals and drink on shift Verve People are committed to being an Equal Opportunities employer, and do not discriminate against any candidate on the grounds of age, disability, sex, gender identity, sexual orientation, pregnancy and maternity, race, religion or belief, marriage and civil partnerships, or other applicable legally protected characteristics. INDAVI
