87 jobs found

Job Title: IT Assistant Location: Southwest Pathology Services, Lisieux Way, Taunton, TA1 2LB Salary: 24,938 to 26,598 per annum Job Type: Full Time, Permanent Join our IT Service team as an IT Assistant on a permanent, full-time contract. This role would suit those who share our dedication to providing exceptional patient and customer service and thrive in a collaborative environment where knowledge sharing is key. As an integral part of the Pathology IT Service team, you will provide essential support for all Pathology systems. Working closely with our laboratory colleagues at the Hub and two Essential Service Laboratories (ESLs), you will ensure the reliability of our systems and deliver vital information to our service users, directly contributing to efficient healthcare delivery. The role will be in person based at our Hub lab site on Lisieux Way, with the potential to work at one of our ESL sites when required. Key Responsibilities: They will be primarily responsible for logically and systematically analysing, prioritising, and recording Laboratory IT issues raised by service users. Along with this, the post holder will: Where possible resolve complex technical issues immediately or escalate the issue to the appropriate second line specialist within the team. Ensure that all issues are dealt with within the agreed time constraints. Offer advice, provide training and assistance to users to assist them in resolving technical issues and in the correct use of Laboratory IT systems. Offer first line support for the Laboratory Information Management Systems (LIMS) and all hardware, software across pathology ensuring any issues or problems are timely resolved. Work collaboratively with other member of the Pathology IT Team ensuring a comprehensive, high-quality service is provide to all users and customers. To achieve this the appointee will need to demonstrate good communication and collaborative practices. About you: Essential Requirements: GCSE Maths and English Grade 5 or above (A-C) Level 2 IT qualification (e.g. ECDL) Evidence of successful further education Experience in managing sensitive and complex enquiries. To be able to work flexibly to meet the demands of the role. To be able to work and travel across all sites to carry out the role. Ability to work under pressure, when appropriate Able to interpret data Excellent attention span, with attentive focus for accuracy and detail Excellent administrative and organisational skills, with good attention to detail. Highly self-motivated and able to work on own initiative whilst still being a good "team worker" by freely sharing information with others. Great resolution skills by managing and prioritising conflicting deadlines Good level of physical fitness as required to carry, move equipment eg, printers' computer, monitors. Versatility and adaptability of role within changing environments Customer service experience, with excellent written and verbal communication skills. The ability to logically analyse and clearly document problems and decide on the best course of action. The ability to explain complex technical issues in language suitable for staff who may not have much computer experience. The ability to work effectively in a stressful environment whilst maintaining personal calm and control. The ability to maintain good manners and a friendly demeanour at all times. Good spoken presentation skills, required for training groups of staff. Strong Knowledge competencies with Microsoft applications. Good troubleshooting skills, of hardware and software peripherals Demonstrate tact, diplomacy, empathy, and critical negotiating skillsets Beneficial Requirements: Experience Working within a Healthcare setting Experience working within a project Team Knowledge of NHS Systems Knowledge of Service Desk Experience of scientific investigations and research projects About Us SYNLAB UK & Ireland work closely with clinicians, hospitals, occupational health providers and clinical researchers to deliver comprehensive pathology services. We thrive in diverse environments, which is mirrored in our workforce, clients, customers, suppliers, communities, and partners. We believe that an inclusive workplace culture is essential for attracting and retaining talented individuals, and for building a sustainable, high-performing workforce. Please note that we reserve the right to close any adverts once we have received a sufficient number of applications. If you decide to apply for this post but do not hear back from us within two weeks of your application, please assume that you have not been short-listed on this occasion. SYNLAB UK & Ireland is committed to equal opportunities and does not unlawfully discriminate based on any status or condition protected by applicable UK employment law. Please note that the company does not offer sponsorship and therefore candidates must have the legal right to live and work in the UK to be considered. Please click the APPLY button to send your CV and Cover Letter for this role. Candidates with the relevant experience or job titles of; 1st Line Technical Support, IT Technician, IT Support Engineer, IT Service Engineer, 1st Line Helpdesk Engineer, IT Support Technician, 1st Line Support Engineer, may also be considered for this role.

Westlakes Recruit are currently recruiting for an experienced senior stress engineer to be engaged on a contract basis in Derby. Our client's Stress capability and are looking for enthusiastic Senior Stress Engineers to join us. You will report into the Stress Technical Lead and will work in an embedded team based at clients' sites in Derby. Your Missions Provide integrity substantiation using Finite Element method and/or Code assessment Assist in calculation reviews Modelling experience Adhere to Assystem quality system Work to man-hour budgets for assigned tasks If required, assist in proposal writing and other related bidding activities Successful candidates will be expected to assist in achieving business targets by ensuring his/her analysis work meets the defined quality, time, and cost requirements. Why join the community of Switchers?: The Group is currently ranked second in the world for nuclear engineering. A dynamic career management policy to enable our employees to progress through our five business lines: operations, project, technical, sales and support functions Provide opportunities to work on exciting, global projects Access to an employee assistance programme with free mindfulness, health, wellbeing resources and a confidential support line available 24/7 via phone or text Discount vouchers for days out and restaurants, eye test and glasses vouchers, cycle to work scheme, free flu jabs Qualifications To be successful in this role you will need: Nuclear industry experience (defence) preferable, but transferable skills from other disciplines accepted Demonstrable expertise in fatigue, fracture, thermal, and structural stress assessments using finite element analysis Finite Element analysis in ABAQUS (explicit/implicit) ABAQUS/CAE or equivalent pre/post (desirable) Code assessment to ASME B&PVC and R6; RCC-M a plus Knowledge of structural integrity & defect tolerance assessments Python scripting in ABAQUS environment desirable CRACKEN or alternative fracture assessment experience Fatigue crack growth & initiation experience desirable Familiar with Gated review process Why We're Different: Westlakes Recruit are a people solutions business that understands the complexities of nuclear and the importance of our clients' mission critical objectives. Smarter, faster, more agile - we have a laser focus on nuclear, with deep sectoral knowledge. We develop nuclear talent pools before you know you need them! We do Nuclear. We only do Nuclear. We do all of Nuclear. Powering a Diverse Nuclear Future: As an equal opportunities business, we value applications from all backgrounds, cultures and abilities.

Senior Stress Engineer - Rocket Propulsion Stress; FEA; Structures; Materials Science; Mechanical Engineering £40,000 - £55,000 + excellent Benefits. Kidderminster (Hybrid available) A cutting-edge Aerospace & Defence organisation have a unique opportunity for a Stress Engineer to join their Design team. The design department designs new and modified rocket motors and related systems. Analysis of rocket motor designs, including: Ballistic performance prediction and modelling, propellant charge and hardware stress analysis, and the provision of documentation service. ESSENTIAL DUTIES & REPONSIBILITIES - Stress Engineer Technical Responsibilities Analysis of new and existing rocket motor systems such as motor hardware and propellant charge structural and thermal analysis using FEA software. The use of various software and programming techniques, including: Abaqus, Altair-Hyperworks, Fortran and Matlab. Rheological analysis of material testing results and providing advice to the technical community for validation and verification of FEA models. Development of motor structural test plans and involvement in the delivery and assessment of the structural testing results. Responsible as the structural performance technical authority aspects of assigned projects, including supporting project customer meetings, project investigations, design reviews, and corresponding customer stress engineers. Deliver key project documentation including, structural analysis and structural test plans and reports and structural design records. EXPERIENCE & BACKGROUND - Stress Engineer Educated to degree level in an engineering discipline such as Mechanical, Aerospace or Structural or another related discipline such as Material Science. Material science knowledge Use of ABAQUS software in an professional or academic environment Experience with CAD modelling

A Snapshot of Your Day Join our dynamic metallurgical laboratory where you deliver precise materials data through robust mechanical testing and analysis. You'll engage across tensile, HCF, LCF, crack propagation, stress relaxation, creep, oxidation and corrosion disciplines, adapting to other methods as required. Partner with Service and Overhauls, Design Engineering, Quality, Manufacturing, and Siemens Energy worldwide to validate critical components and support fault analysis. You'll analyse test results, compile material property data sheets, and project manage testing from inception to completion. As you build competency in high temperature techniques, you'll contribute to future technology initiatives and grow your impact. How You'll Make an Impact • Provide material testing and property analysis support to Service/Overhaul and Engineering. • Conduct mechanical tests (tensile, HCF, LCF, crack propagation, stress relaxation, creep, oxidation, corrosion), analyse data, and prepare material property data sheets. • Validate critical components, assist with fault analysis, and contribute to future technology initiatives for high temperature materials. • Build competency in relevant mechanical testing methodologies and ensure rigorous, reliable results. • Project manage material testing projects end to end, collaborating with Design Engineering, Quality, Manufacturing, and Siemens Energy Worldwide. What You Bring • A first degree in a Science/Materials discipline; preferably a Master's in Materials/Metallurgical Engineering. • Relevant industrial experience post graduation is preferred. • Basic knowledge of gas turbine materials and material testing techniques; understanding of high temperature behaviour and degradation processes is advantageous. • Skills in mechanical testing, especially HCF, LCF and creep (hands on training provided), plus proficiency in IT, project management, and presentation. • Desirable experience in metallurgical preparation for microscopy. About the Team Our metallurgical laboratory supports the business with precise materials data using robust mechanical testing and analysis methodologies. The team works across tensile, HCF, LCF, crack propagation, stress relaxation, creep, oxidation and corrosion disciplines, expanding to other methods as required. We collaborate closely with Service and Overhauls, Design Engineering, Quality, Manufacturing, and Siemens Energy worldwide to uphold high standards of testing and analysis. The laboratory validates critical components and assists with fault analysis for the business. We also contribute to future technology initiatives and advance materials testing methodologies, particularly for high temperature materials. In a fast paced environment, we combine analytical rigour with collaborative problem solving to deliver trusted insights. Early career colleagues receive hands on training to build competence across the testing portfolio. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion, and our combined creative energy is fuelled by over 130 nationalities. Siemens Energy celebrates character-no matter what ethnic background, gender, age, religion, identity, or disability. We energise society, all of society, and we do not discriminate based on our differences. Rewards/Benefits Here are examples of the rewards and benefits Siemens Energy offers: • Opportunities to work with a global team • Opportunities to work on and lead a variety of innovative projects • Medical benefits • Remote/Flexible work • Time off/Paid holidays and parental leave • Continual learning through the platform • Access to a variety of employee resource groups

My client is an award-winning Tech for Good organisation with a range of products and services designed to enable a better quality of life for some of the world's most disadvantaged communities. Their small, globally distributed technology team provides software and hardware solutions, and due to huge recent investment and substantial scaling of their services, they are recruiting for a QA specialist to own the test process, service and environment going forward. This will be a critical role at a crucial time of growth for the organisation. You will need to be a real self-starter. Someone used to operating in hyper-agile, fast moving environments working to your own initiative as you will be the sole QA engineer in the team. The work will be a mixture of manual and automated testing. Whilst the focus will be on building automated processes, there will always be some manual work to do. What We're Looking For: Proven experience in functional and non-functional testing, including performance and stress testing. Comfortable with manual testing and able to automate where it adds value. Independent, pragmatic and driven you'll need to make things happen with minimal supervision. Flexible, humble, and eager to learn - able to thrive in a small team where everyone wears multiple hats. Nice-to-Haves: Experience with IoT device interfaces and or data-heavy environments. Background in automation frameworks or CI CD integration. Familiarity with AWS environments and cloud infrastructure (not essential for day one). Why apply: Fully remote role - work from anywhere. Small, agile team where your work has a direct impact. Opportunity to define processes and potentially lead QA as the company grows If you are looking for a QA engineer position with autonomy and responsibility, please apply below and call Sam Wason at Cathcart for more information.

Job Title: Naval Architect Location: Plymouth - Hybrid - 2 days per week on-site Role Type: Contract - 12 Months Rate: 45.00 - 57.78 per hour - Outside IR35 Our client, an established engineering consultancy, require an experienced Naval Architect to join their multi-disciplined team. Please note we can only consider sole UK Nationals (no dual nationalities) What the role of the Naval Architect entails: Some of the main duties of the Naval Architect will include: Undertake naval architecture analyses, including mooring, stability, towing and structural assessments, for vessels and floating infrastructure. Support design, modification and development projects that enhance dockyard operational capabilities and infrastructure and help improve safety and reliability. Conduct on-site surveys and inspection of vessels, docks, basins and associated marine assets. Apply knowledge of marine classification and regulatory requirements to ensure compliance in dockyard operations. Prepare and deliver clear technical reports, calculations and supporting documentation. Collaborate effectively with multi-disciplinary teams including structural, mechanical, electrical and project engineers. Be adaptable, as project requirements evolve, balancing time, cost and quality constraints and ensure relevant parties are notified of changes in the project. What experience you need to be the successful Naval Architect: Essential: Bachelor's degree (minimum) in Naval Architecture, Marine Engineering or a closely related discipline. Typically 2+ years of relevant experience in a relevant marine or naval engineering environment. Understanding of ship stability, structural behaviour and marine systems. Awareness of dockyard operations, vessel servicing and floating infrastructure. Experience with classification rules and regulatory frameworks (e.g. Lloyd's Register) Ability to interpret and produce technical drawings, reports and engineering calculations. Familiarity with CAD software and basic structural or hydrostatic analysis tools. Good written and verbal communication skills, listens effectively, works collaboratively and clarifies information as needed. Ability to obtain SC Clearance. If you already hold clearance this is a plus. Desirable: Exposure to new ship design, structural or outfitting development. Experience with marine surveys or working in dry dock environments. Proficiency with tools such as Rhino, AutoCAD, Orca3D, GHS or similar. Awareness of stress and structural integrity assessments. Experience working alongside or coordinating with operations teams. This really is a fantastic opportunity for a Naval Architect to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.

Performance Test Engineer (Python Automation for large-scale, low-latency, distributed systems Remote Europe) Location: Remote (Europe & UK only) Full-Time 6-Month Contract Start Date: within 1-2 weeks 350pd IR35 Outside TBC We're seeking a hands-on Performance Test Engineer with Strong Python and automation expertise to design, build, and execute the performance testing strategy for a high-scale, ad-serving platform built on Akka-based Java microservices. Required to build automated load frameworks using Locust (Python). You'll work closely with developers and DevOps engineers to simulate realistic traffic at scale, ensure sub-50ms latency under millions of concurrent users, and drive system optimizations across cloud infrastructure and code. This is a technical, high-impact role ideal for someone passionate about distributed systems performance, automation, and data-driven tuning. Profile: 3-5+ years of performance engineering for large-scale, low-latency, distributed systems. Proven success meeting p95/p99 latency SLAs under high concurrency (millions of RPS). Strong Python and automation expertise - able to design reusable, scalable test frameworks. Experience with distributed load testing and synthetic traffic modeling in the cloud. Analytical, structured, and effective communicator with strong documentation and collaboration skills. Based in EU or UK with English (C1 or higher). Nice to have: Java, Bash scripting, Terraform. Key Responsibilities: Define and execute comprehensive performance test plans (load, stress, spike, soak, scalability, failover). Model real-world streaming traffic patterns (burstiness, fan-out, cache behavior, cold-start, geo distribution). Build automated load frameworks using Locust (Python) or JMeter, with data parameterization and correlation. Manage distributed load generation (containers, cloud workers) to simulate millions of concurrent users. Integrate performance metrics from CloudWatch, Prometheus, Grafana, and OpenTelemetry to analyze system bottlenecks. Develop SLA/SLO dashboards and integrate performance gates into CI/CD pipelines. Collaborate with DevOps and developers to tune JVM, Akka, thread pools, GC, caching, autoscaling, and database performance. Document test approaches, scenarios, results, and provide clear, actionable tuning recommendations. Tech Stack: Load Tools: Locust (Python), JMeter; k6 or Gatling (nice to have). Languages: Python, Bash, Java (Maven/Gradle, JVM tuning basics). Infrastructure: Docker, Kubernetes, Terraform. Observability: CloudWatch, Prometheus, Grafana, OpenTelemetry. Architecture: Akka-based asynchronous Java microservices. Logistics: Start date: 17 November 2025. Duration: 6 months (extension possible). Employment type: Full-Time (Freelance allowed). Location: Remote (Europe). If you're passionate about performance engineering and love optimizing systems that operate at global scale, we'd love to hear from you. Apply now and be part of an agile, innovative European tech team. Everybody is welcome Diversity and Inclusion Statement. PCR Digital "At PCR Digital, we are committed to ensuring that diversity, equity and inclusion play a role at all stages of our recruitment - it is important to us that our own company culture and the culture of our network is as varied and supportive as possible. We love people (it's why we do what we do), so, regardless of background, we welcome you to work with us or apply to any of our jobs if you feel that they are right for you."

Job Title: Principal Engineer - Structural Engineering Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Competitive What you'll be doing: Undertake and define functional design and/or provide specialist advice and qualification of their scope of responsibility and provide evidence for acceptance and fitness for purpose Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated, assisting to define the requirements therein Produce evidence in support of qualification, legislative requirements and safety justifications and provide specialist support for associated activities Lead the identification and rapid closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Liaise with both internal and external customers as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Provide realistic programme status, identify problem areas and implement agreed recovery plans Lead assurance activities that determine the design is adequate i.e. it is robust, in providing supporting documentation for the safety case To be able to access, have a clear understanding of and apply the Quality and HSandE Management System documentation e.g. Process Instructions, Workmanship Standards, Risk Assessments etc . Your skills and experiences: Experienced in the use of mechanical engineering principles and practices Proficient in classical stress analysis , with a strong ability to apply relevant first principles /standard or code-based formula Experienced in finite element analysis methods and/or software, or appropriate significant experience assessing such reports Experience in the manufacturing, assembly, commissioning and testing processes employed within the business or comparable industries Ability to apply naval and industry standards, including relevant and environmental regulations BENg - Charted Engineer or working towards Chartership Bachelor/Master Degree with significant experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Structural Engineering team: As the Principal Engineer - Structural Engineering you will execute, evaluate, deliver and manage complex engineering and/or cross functional tasks or programmes of work recognising stakeholder and customer requirements. You will also identify and implement opportunities for personal and team development to ensure that professional capability of the business and individual are maintained and improved. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 6th November 2025. We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Engineer - Structural Engineering Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Competitive What you'll be doing: Undertake and define functional design and/or provide specialist advice and qualification of their scope of responsibility and provide evidence for acceptance and fitness for purpose Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated, assisting to define the requirements therein Produce evidence in support of qualification, legislative requirements and safety justifications and provide specialist support for associated activities Lead the identification and rapid closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Liaise with both internal and external customers as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Provide realistic programme status, identify problem areas and implement agreed recovery plans Lead assurance activities that determine the design is adequate i.e. it is robust, in providing supporting documentation for the safety case To be able to access, have a clear understanding of and apply the Quality and HSandE Management System documentation e.g. Process Instructions, Workmanship Standards, Risk Assessments etc . Your skills and experiences: Experienced in the use of mechanical engineering principles and practices Proficient in classical stress analysis , with a strong ability to apply relevant first principles /standard or code-based formula Experienced in finite element analysis methods and/or software, or appropriate significant experience assessing such reports Experience in the manufacturing, assembly, commissioning and testing processes employed within the business or comparable industries Ability to apply naval and industry standards, including relevant and environmental regulations BENg - Charted Engineer or working towards Chartership Bachelor/Master Degree with significant experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Structural Engineering team: As the Principal Engineer - Structural Engineering you will execute, evaluate, deliver and manage complex engineering and/or cross functional tasks or programmes of work recognising stakeholder and customer requirements. You will also identify and implement opportunities for personal and team development to ensure that professional capability of the business and individual are maintained and improved. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 6th November 2025. We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job title: Principal Mechanical Engineer - PNED Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: £45,628 - £57,500 dependent on experience What you'll be doing: Collaborate closely with the build organisation, providing engineering support to ensure the final product aligns with original design intent Demonstrate a strong understanding of key requirements and critical dimensions related to major structural components Lead the assessment and implementation of design changes impacting primary structural elements, whether driven by emergent issues, continuous improvement, or process updates Support, or where appropriate, serve as the engineering representative within test and authorisation groups Develop specialised knowledge of the unique build sequence of the Reactor Compartment Unit and deliver ongoing engineering support throughout construction Represent the engineering function during the planning and execution of major construction milestones within the Reactor Compartment Unit's scope Investigate and present robust technical solutions to challenges encountered during the construction of the Naval Reactor Plant Provide well-reasoned technical recommendations to key stakeholders, including Rolls-Royce and the Ministry of Defence, to support or constructively challenge existing requirements Your skills and experiences: Essential: Degree-level qualification in Engineering, preferably with a focus on Mechanical or Structural disciplines Proficient in interpreting mechanical drawings, with a solid understanding of geometric dimensioning and tolerancing (GD&T) Familiarity with welding engineering principles and non-destructive examination (NDE) techniques Strong technical report writing skills, with experience in producing clear justifications for design changes Desirable: Understanding of stress, fatigue, and thermal analysis principles in engineering applications Awareness of nuclear radiation shielding requirements and best practices Prior experience working within a nuclear plant environment Knowledge of the nuclear industry, including familiarity with regulatory bodies and compliance standards Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Nuclear Engineering Department team: As a Principal Mechanical Engineer - PNED, you will play a critical role in supporting the design, build, and test phases of the Naval Reactor Plant (NRP) across multiple programmes, ensuring alignments with the original design intent. This includes leading the resolution of complex technical issues encountered during construction and testing, with a focus on developing robust engineering solutions and maintaining the integrity of the supporting safety case. You will provide expert guidance to internal teams including Engineering Delivery, Test & Commissioning, Operations, and Project Management. Additionally, you will represent the business in collaboration with key external stakeholders, including the Ministry of Defence (MoD) and Rolls-Royce Power, ensuring effective coordination across the wider enterprise. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you will be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically leave 5 to 10 years of continuous residency in the UK depending in the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 23 rd October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

CAE Engineer Location: Warwickshire Salary: £40,000 and £50,000 D.O.E The Opportunity Join a leading UK vehicle manufacturer with a global reputation for safety, reliability, and sustainability. You ll have the chance to grow your skills, work on innovative projects including next-generation zero-emission vehicles, and be part of a company that invests in its people and their career development. This is a great role for a mechanically biased engineer who is either already working in CAE or looking to move into it and develop further . You ll start with a mix of mechanical design and analysis , with full training into CAE tools and methods. You'll be guided by the Senior CAE Engineer so this role is ideal for someone motivated, hands-on, and keen to grow. What You ll Do Build and run FEA models across a range of CAE projects Support validation plans and help resolve product issues Carry out stress, fatigue and durability analysis (training given if needed) Work alongside test and development teams to align simulation and test data Produce verification reports and support internal engineering standards Contribute to mechanical design tasks as part of your development into CAE What We re Looking For Degree in Mechanical Engineering (or equivalent experience) Strong mechanical design background (core skillset) Interest in CAE / FEA with a willingness to learn and develop Exposure to MATLAB desirable; knowledge of Altair or ANSYS a plus Good problem-solving skills, attention to detail, and team mindset Positive attitude and eagerness to learn training will be provided Why Apply? Chance to move into CAE with full training and development Flexitime and hybrid working after initial induction Be part of an innovative engineering team working on next-gen vehicles

Carmichael UK are seeking a highly motivated and experienced Section Engineer (Structures) to join the HS2 delivery team in Northamptonshire. You will be responsible for the delivery of structural works for a major viaduct section, ensuring compliance with design, quality, safety, and programme requirements. You will act as the lead interface between design, construction, and site teams, driving forward construction of complex structural elements and ensuring all works align with HS2 technical and safety standards. Key Responsibilities Manage the detailed structural execution of viaduct works: foundations, piers, deck units, bearings, expansion joints, drainage related to structure etc. Interpret structural design drawings (including CAD / BIM) and specification, ensuring clarity and practical implementation. Liaise with design engineers to resolve technical and constructability issues; lead design workshop reviews where required. Prepare and monitor construction method statements, temporary works designs, lifting plans, and ensure compliance with CDM / Health & Safety regulations. Oversee contractors and subcontractors responsible for structural concrete, steelwork, prestressing, post-tensioning, formwork and reinforcement. Conduct site inspections and quality checks; ensure that materials, workmanship and installations meet HS2 / British Standards / project quality criteria. Coordinate with the programme team to ensure structure deliverables are on programme; identify and mitigate delays. Maintain robust documentation: risk registers, site diaries, progress reports, QA/QC records. Required Skills & Experience Proven understanding of bridge and viaduct structural elements Experience working with contractors, subcontractors and multi disciplinary design teams in a large civil engineering / railway / infrastructure environment. Strong technical knowledge of reinforced concrete, prestressed / post-tensioned concrete, steelwork, composite structures. Proven ability to produce method statements, supervision plans, construction sequencing, risk assessments. Strong leadership, communication and stakeholder management skills.

Job title: Principal Mechanical Engineer - PNED Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: £45,628 - £57,500 dependent on experience What you'll be doing: Collaborate closely with the build organisation, providing engineering support to ensure the final product aligns with original design intent Demonstrate a strong understanding of key requirements and critical dimensions related to major structural components Lead the assessment and implementation of design changes impacting primary structural elements, whether driven by emergent issues, continuous improvement, or process updates Support, or where appropriate, serve as the engineering representative within test and authorisation groups Develop specialised knowledge of the unique build sequence of the Reactor Compartment Unit and deliver ongoing engineering support throughout construction Represent the engineering function during the planning and execution of major construction milestones within the Reactor Compartment Unit's scope Investigate and present robust technical solutions to challenges encountered during the construction of the Naval Reactor Plant Provide well-reasoned technical recommendations to key stakeholders, including Rolls-Royce and the Ministry of Defence, to support or constructively challenge existing requirements Your skills and experiences: Essential: Degree-level qualification in Engineering, preferably with a focus on Mechanical or Structural disciplines Proficient in interpreting mechanical drawings, with a solid understanding of geometric dimensioning and tolerancing (GD&T) Familiarity with welding engineering principles and non-destructive examination (NDE) techniques Strong technical report writing skills, with experience in producing clear justifications for design changes Desirable: Understanding of stress, fatigue, and thermal analysis principles in engineering applications Awareness of nuclear radiation shielding requirements and best practices Prior experience working within a nuclear plant environment Knowledge of the nuclear industry, including familiarity with regulatory bodies and compliance standards Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Nuclear Engineering Department team: As a Principal Mechanical Engineer - PNED, you will play a critical role in supporting the design, build, and test phases of the Naval Reactor Plant (NRP) across multiple programmes, ensuring alignments with the original design intent. This includes leading the resolution of complex technical issues encountered during construction and testing, with a focus on developing robust engineering solutions and maintaining the integrity of the supporting safety case. You will provide expert guidance to internal teams including Engineering Delivery, Test & Commissioning, Operations, and Project Management. Additionally, you will represent the business in collaboration with key external stakeholders, including the Ministry of Defence (MoD) and Rolls-Royce Power, ensuring effective coordination across the wider enterprise. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you will be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically leave 5 to 10 years of continuous residency in the UK depending in the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 23 rd October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Engineer - Structural Engineering Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Competitive What you'll be doing: Undertake and define functional design and/or provide specialist advice and qualification of their scope of responsibility and provide evidence for acceptance and fitness for purpose Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated, assisting to define the requirements therein Produce evidence in support of qualification, legislative requirements and safety justifications and provide specialist support for associated activities Lead the identification and rapid closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Liaise with both internal and external customers as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Provide realistic programme status, identify problem areas and implement agreed recovery plans Lead assurance activities that determine the design is adequate i.e. it is robust, in providing supporting documentation for the safety case To be able to access, have a clear understanding of and apply the Quality and HSandE Management System documentation e.g. Process Instructions, Workmanship Standards, Risk Assessments etc . Your skills and experiences: Experienced in the use of mechanical engineering principles and practices Proficient in classical stress analysis , with a strong ability to apply relevant first principles /standard or code-based formula Experienced in finite element analysis methods and/or software, or appropriate significant experience assessing such reports Experience in the manufacturing, assembly, commissioning and testing processes employed within the business or comparable industries Ability to apply naval and industry standards, including relevant and environmental regulations BENg - Charted Engineer or working towards Chartership Bachelor/Master Degree with significant experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Structural Engineering team: As the Principal Engineer - Structural Engineering you will execute, evaluate, deliver and manage complex engineering and/or cross functional tasks or programmes of work recognising stakeholder and customer requirements. You will also identify and implement opportunities for personal and team development to ensure that professional capability of the business and individual are maintained and improved. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 6th November 2025. We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Mechanical Design Engineer (CAD Tooling) - London - 40 - 50 per hour DOE (Umbrella) - Contract (up to 2 Years) Job Description: Our client is seeking an experienced Mechanical Design Engineer to play a key role in the industrialisation and introduction of cutting-edge submerged products into production. This long-term contract offers the opportunity to lead on defining, designing and validating complex tooling and equipment solutions, ensuring efficient assembly processes that deliver exceptional quality and reliability. Key Responsibilities: Lead collaboration with Supply Chain and R&D teams to support the industrialisation of new products. Define, design and optimise tooling and equipment, including jigs, lifting fixtures and workstations, for efficient assembly and testing. Recommend and implement alternative tooling solutions to improve efficiency, safety and reliability. Use Creo CAD to develop and model advanced tooling concepts. Present tooling solutions and influence key stakeholders. Identify and source external equipment to strengthen production capabilities. Manage relationships with tooling manufacturers to ensure delivery, compliance and quality standards are met. Inspect and validate new tooling against specification, calibration and inspection requirements. Oversee tooling validation and qualification model builds. Requirements: Degree (or equivalent) in Mechanical/Manufacturing Engineering. Proven track record in designing tools, fixtures and equipment for complex assembly/manufacturing environments. Proficiency in Creo CAD preferred. Strong ability to apply reliability engineering judgement. Experience with FEA (Ansys) for stress/simulation analysis. Significant experience in technical/manufacturing environments, ideally within high-reliability sectors. Excellent interpersonal, communication and leadership skills. How to apply: To apply for this excellent opportunity, please send your CV or contact Rob Hutchings at (phone number removed).

Our client, a prominent entity within the Defence & Security sector, is currently looking for an SC Cleared Mechanical Engineer for a contract position outside IR35. This role demands someone capable of integrating seamlessly into project teams to provide mechanical expertise on various products and systems. Key Responsibilities: Assist and liaise with project teams on mechanical aspects of products and systems. Design bespoke equipment in accordance with defence standards to enhance modern defence capabilities. Select materials, manufacturing processes, and integration methods suitable for the equipment's use. Provide technical advice to suppliers and internal departments to ensure product compliance with design intent. Advise and conduct testing to demonstrate compliance with Defence and International Standards. Support Quality and Production to ensure components and end products meet design intents. Assist off-site engineers with problem-solving, troubleshooting, and integration/testing of products and systems. Ensure all data and design decisions adhere to best practices to maintain traceability. Comply with all relevant Health and Safety requirements and practices operated by the client. Contribute to design development and reviews to manage project opportunities and risks effectively. Job Requirements: A relevant engineering qualification such as a Level 6 NVQ or Honour's Degree in a numerate discipline, or equivalent industrial experience. Experience in an engineering or manufacturing environment would be advantageous. A Level 3 qualification (NVQ 3, Advanced Apprenticeship, or AS/A Level) linked to Maths and Science (Physics). Proficiency in English, both written and spoken, or at least to level B2 according to CEFR. Formal training in and experience with CAD software (Inventor preferred). Competence with 3D design software (Inventor preferred) and ability to create 2D drawings as per BS EN8888 or equivalent standards. Excellent verbal and written communication skills. Proven ability to work across multiple projects and meet challenging timescales within a small team environment. A passion for practical problem-solving. Self-motivation, a drive to learn, and an eagerness to enhance work practices and embrace emerging technologies. An understanding of the importance of traceability and process in mechanical engineering. Knowledge of creating intuitive, modifiable parts and assemblies to facilitate ease of modification. Grasp of product data management systems (AutoDesk Vault preferred). Awareness of JIRA or similar task monitoring tools. Basic understanding of stress analysis using hand calculations and FEA (Nastran preferred). If you are an experienced Mechanical Engineer with security clearance and are seeking a new contract opportunity in the Defence and Security sector, we would be delighted to hear from you. Apply now to join our client's innovative and dynamic team.

A Snapshot of Your Day Join our Lincoln, UK Turbine Engineering team as a Stress Analysis (Mechanical Integrity) Engineer. You will focus on conducting Finite Element Analysis (FEA) for Gas Turbine components. How You'll Make an Impact Collaborate with Mechanical Design, Heat Transfer, and Material Science teams to derive component life and duty-based lifing. Analyse and adapt turbine blade, vane, and casing designs for new products and upgrades to meet life targets. Conduct root cause analysis, weighted decision analysis, and design of experiments to improve product reliability. Specify component and engine test requirements, ensuring alignment with performance goals. Calibrate structural models using engine test data and fleet experience to validate design assumptions. What You Bring A Bachelor's or Master's degree with a strong focus on Aerospace, Power Generation, Turbomachinery, or Automotive structural/mechanical design or materials science. Relevant work experience in Finite Element stress analysis and component life calculation. In-depth knowledge of material behavior, failure modes, and testing methods under cyclic and steady conditions, especially at high temperatures. Proficiency in FE analysis and pre/post-processing software, particularly ABAQUS; familiarity with ANSYS, NX-SimCenter, or RR SC03 is also valuable. Strong analytical skills to critique and validate results using 1D methods, such as hand calculations. About the Team Our Gas Services division is dedicated to providing low-emission power generation through innovative service and decarbonization solutions. We focus on delivering zero or low-emission power generation, encompassing all gas turbines, steam turbines, and generators under one roof. Our team is committed to exploring decarbonization opportunities through modernisation and digitalisation of the fleet, ensuring a balanced future for energy generation. Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion, and our combined creative energy is fuelled by over 130 nationalities. Siemens Energy celebrates character-no matter what ethnic background, gender, age, religion, identity, or disability. We energise society, all of society, and we do not discriminate based on our differences. Rewards/Benefits Here are examples of the rewards and benefits Siemens Energy offers: Opportunities to work with a distributed team Opportunities to work on and lead a variety of innovative projects Medical benefits Remote/Flexible work Time off/Paid holidays and parental leave Continual learning through the platform Access to a variety of employee resource groups

Join Our Dynamic Team in Petersfield! Are you on the lookout for a fulfilling job opportunity as a Service Operative in Petersfield? Look no further! Our globally renowned manufacturing company is seeking dedicated individuals like you to join our exceptional team. Experience : we are looking for candidates with the below experience Leadership or team management experience. Previous experience in a fast paced manufacturing environment. Previous roles such as Team Leader, Cell Leader, Line Leader, etc. Competitive Pay: Up to 15.93 per hour for late shift and 16.48 per hour for night shift (inclusive of shift allowance) Lates: 3.00pm to 11.00pm Nights: 11 pm - 7 am Full Time: Work full-time 5 days a week Modern Facility: Our state-of-the-art facility in Petersfield provides a comfortable and contemporary work environment. Convenient Transportation: Take advantage of our company bus service for just 3.50 a day, ensuring stress-free commuting. Perks: Enjoy perks like goody bags twice a year. A budget-friendly canteen offering free porridge for breakfast and soup for lunch. Your Duties: Oversee assembly line operations to ensure production plans, KPIs, quality, and GMP standards are consistently met. Lead and support team performance, including task assignment, skill utilisation, rotation, coaching, and return-to-work processes. Monitor and improve line efficiency, using OEE data and problem-solving tools to drive output and minimise downtime. Implement and sustain continuous improvement, Lean, 5S, and waste-reduction initiatives in collaboration with CI, Tech Ops, and Engineering teams. Ensure quality compliance, performing in-process checks, maintaining accurate documentation, and supporting investigations and corrective actions. Support management with ad hoc tasks, including project work, reporting, and flexing into Assembly Operator duties as needed. Join us in our journey of excellence and make a meaningful impact with our passionate team. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser (url removed)

Design Engineer - Aviation Structures (Rotary Aircraft) 6-Month Contract Yeovil Area Location: Yeovil, UK Contract Duration: 6 months (potential for extension) Start Date: ASAP We are seeking an experienced Design Engineer with a strong background in aviation structures and rotary aircraft design to join our team on a 6-month contract basis. This is an exciting opportunity to contribute to high-profile aerospace projects in a fast-paced and innovative environment. Key Responsibilities: Design and develop structural components and assemblies for rotary-wing aircraft. Produce detailed 2D and 3D drawings using AutoCAD. Conduct design reviews, stress considerations, and modification assessments. Liaise with cross-functional engineering and production teams to ensure design integrity and compliance. Support documentation and certification requirements for aerospace standards. Essential Requirements: Proven experience in rotary aircraft or aerospace structural design. Proficiency in AutoCAD - candidates must have their own active AutoCAD licence. Strong understanding of aerospace materials, tolerancing, and manufacturing processes. Ability to work independently and deliver to tight project timelines. Must be based in or able to commute to the Yeovil area. Desirable: Familiarity with civil or military rotorcraft platforms. Experience with stress analysis or design certification support. Contract Details: 6-month initial contract Competitive hourly/daily rate (DOE) For more information and to register your interest please apply with a copy of your up to date CV.