Machinist/Toolmaker An exciting opportunity has become available for a full time, experienced Toolmaker to join a small and friendly Toolroom team. This role involves the manufacture and maintenance of form and cutting tools, jigs, and fixtures to support production in a high-security manufacturing environment. The Toolroom is equipped with a range of manual and CNC machinery, including wire erosion. While all new tooling is supported with fully dimensioned technical drawings, a solid understanding of tooling functionality is essential. Key Responsibilities: Manufacture, repair, and maintain press tools to precise engineering drawings and tolerances. Operate a variety of manual and CNC machinery including milling machines, lathes, and surface grinders. Perform routine servicing and regrinding of tools. Verify conformity of machined and/or repaired tools to specifications by checking dimensions, clearances, and alignments. Investigate and report root causes of equipment breakdowns and faults. Ensure all work meets high-quality standards and complies with relevant quality regulations. Ensure all tooling is safe, functional, and production-ready before return, following correct preventative maintenance (PM) procedures. Essential Skills & Experience: Skilled in the use of precision hand tools. Proficient in reading and interpreting engineering drawings. Experience operating Toolroom machinery and equipment (e.g., milling machines, lathes, surface grinders). The Ideal Candidate: Brings a flexible and proactive approach to teamwork. Capable of working independently without supervision. Comfortable working in an environment where projects may be shared or passed between team members due to workflow demands. Salary: Up to 18 - Can be higher for the right individual
Oct 20, 2025
Full time
Machinist/Toolmaker An exciting opportunity has become available for a full time, experienced Toolmaker to join a small and friendly Toolroom team. This role involves the manufacture and maintenance of form and cutting tools, jigs, and fixtures to support production in a high-security manufacturing environment. The Toolroom is equipped with a range of manual and CNC machinery, including wire erosion. While all new tooling is supported with fully dimensioned technical drawings, a solid understanding of tooling functionality is essential. Key Responsibilities: Manufacture, repair, and maintain press tools to precise engineering drawings and tolerances. Operate a variety of manual and CNC machinery including milling machines, lathes, and surface grinders. Perform routine servicing and regrinding of tools. Verify conformity of machined and/or repaired tools to specifications by checking dimensions, clearances, and alignments. Investigate and report root causes of equipment breakdowns and faults. Ensure all work meets high-quality standards and complies with relevant quality regulations. Ensure all tooling is safe, functional, and production-ready before return, following correct preventative maintenance (PM) procedures. Essential Skills & Experience: Skilled in the use of precision hand tools. Proficient in reading and interpreting engineering drawings. Experience operating Toolroom machinery and equipment (e.g., milling machines, lathes, surface grinders). The Ideal Candidate: Brings a flexible and proactive approach to teamwork. Capable of working independently without supervision. Comfortable working in an environment where projects may be shared or passed between team members due to workflow demands. Salary: Up to 18 - Can be higher for the right individual
A Snapshot of Your Day As a CNC Machinist, you will play a key role in the manufacture of precision-engineered components. Your day will involve setting up and operating manual and CNC machine tools, interpreting engineering drawings, and ensuring every part meets the highest standards of accuracy and quality. You'll work collaboratively with the production and engineering teams to deliver efficient and reliable manufacturing solutions. How You'll Make an Impact Set up and operate manual and CNC machine tools such as lathes, horizontal borers, and grinders to produce precision parts. Read and interpret engineering drawings, layouts, and specifications to determine machining operations. Measure and visually inspect completed parts to detect defects and ensure conformance to manufacturing documentation. Perform routine maintenance on machines and equipment to ensure optimal performance. Collaborate with production and engineering teams to troubleshoot and resolve machining issues. Maintain a clean and organised work area, adhering to all health and safety procedures. Document and report production data, including quantities, dimensions, and any deviations from specifications. What You Bring Preferably completed a recognised full Level 3 apprenticeship. Candidates with an NVQ Level 3 or technical certificate in a relevant engineering field will also be considered. Proven experience as a machinist in a manufacturing environment. Proficiency in operating machine tools such as lathes, horizontal borers, and grinders. Strong understanding of engineering drawings and specifications. Excellent attention to detail and accuracy in measurements. A proactive approach to problem-solving and continuous improvement. Commitment to maintaining a safe and efficient working environment. About the Team Our Gas Services division offers low-emission power generation through service and decarbonisation. This includes zero or low-emission power generation, along with all gas turbines, steam turbines, and generators under one roof. We provide decarbonisation opportunities through service offerings, modernisation, and digitalisation of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With 100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one-sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonisation, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion, and our combined creative energy is fuelled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energise society, all of society, and we do not discriminate based on our differences. Rewards/Benefits 26 days holiday, increasing to 29 days with time served. Access to a flexible benefits portal for private medical cover, cycle-to-work schemes, and more. A class-leading adjustable pension scheme. Opportunities for career development and continuous learning. The chance to work on cutting-edge projects that shape the future of Siemens Energy and manufacturing.
Oct 16, 2025
Full time
A Snapshot of Your Day As a CNC Machinist, you will play a key role in the manufacture of precision-engineered components. Your day will involve setting up and operating manual and CNC machine tools, interpreting engineering drawings, and ensuring every part meets the highest standards of accuracy and quality. You'll work collaboratively with the production and engineering teams to deliver efficient and reliable manufacturing solutions. How You'll Make an Impact Set up and operate manual and CNC machine tools such as lathes, horizontal borers, and grinders to produce precision parts. Read and interpret engineering drawings, layouts, and specifications to determine machining operations. Measure and visually inspect completed parts to detect defects and ensure conformance to manufacturing documentation. Perform routine maintenance on machines and equipment to ensure optimal performance. Collaborate with production and engineering teams to troubleshoot and resolve machining issues. Maintain a clean and organised work area, adhering to all health and safety procedures. Document and report production data, including quantities, dimensions, and any deviations from specifications. What You Bring Preferably completed a recognised full Level 3 apprenticeship. Candidates with an NVQ Level 3 or technical certificate in a relevant engineering field will also be considered. Proven experience as a machinist in a manufacturing environment. Proficiency in operating machine tools such as lathes, horizontal borers, and grinders. Strong understanding of engineering drawings and specifications. Excellent attention to detail and accuracy in measurements. A proactive approach to problem-solving and continuous improvement. Commitment to maintaining a safe and efficient working environment. About the Team Our Gas Services division offers low-emission power generation through service and decarbonisation. This includes zero or low-emission power generation, along with all gas turbines, steam turbines, and generators under one roof. We provide decarbonisation opportunities through service offerings, modernisation, and digitalisation of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With 100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one-sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonisation, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion, and our combined creative energy is fuelled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energise society, all of society, and we do not discriminate based on our differences. Rewards/Benefits 26 days holiday, increasing to 29 days with time served. Access to a flexible benefits portal for private medical cover, cycle-to-work schemes, and more. A class-leading adjustable pension scheme. Opportunities for career development and continuous learning. The chance to work on cutting-edge projects that shape the future of Siemens Energy and manufacturing.
Baltic Recruitment Services Ltd
North Shields, Tyne And Wear
Baltic Recruitment are delighted to be partnering with OsecoElfab, a global manufacturer of customised rupture discs and explosion vents with their search for a Tooling & Machining Engineer. Overall Purpose: Responsible for the maintenance, repair, and refurbishment of production tooling through the use of manual lathes, mills, and cylindrical grinders to restore and maintain tooling components and cutting blades to operational standards. The role also includes the maintenance and inspection of die sets, setup and upkeep of CNC systems, and the ongoing management of jigs and fixture systems used across multiple production cells along with development of these for current and future products. Key Duties: Manual Machining and Tool Refurbishment: Operate manual machine tools including lathe, vertical mill, and cylindrical grinder to refurbish and maintain tooling and blade components. Evaluate tooling condition and carry out dimensional restoration and rework as required. Maintain records of tooling refurbishment, including measurements, wear assessments, and repair history. Die Set Maintenance and Inspection: Perform routine and preventive maintenance on die sets, including disassembly, cleaning, inspection, and reassembly. Identify and rectify wear, damage, or misalignment in die components to prevent unplanned downtime. Assist with root cause analysis of die-related faults and contribute to corrective actions. CNC Machine Setup and Maintenance: Set up, operate, and maintain Hurco CNC lathe and associated bar feed systems. Perform adjustments to tool offsets, feeds, and speeds to maintain consistent product quality and optimise cycle times. Conduct periodic checks and coordinate maintenance of CNC equipment to ensure reliability. Production CNC System Support: Provide support for CNC production equipment utilising Fanuc controls. Perform basic diagnostics, machine adjustments, and process checks during production. Assist in minor program edits to optimise cycle times and reduce tool wear. Jigs and Fixture Systems: Responsible for the maintenance, inspection, repair and overhaul of jigs and fixture systems used across various production cells. Assess fixture wear, alignment, and operational condition, and perform necessary repairs or adjustments. Collaborate with production and engineering teams to improve fixture functionality and support process stability. Technical Support Provide engineering technical support to a range of mechanical and process issues suggesting changes or improvements where necessary to include some maintenance work where necessary. Responsible for setup and upkeep of onsite tool room area including housekeeping, stock management of cutting tools and spare parts and Optimisation of existing processes and equipment and where appropriate develop suggestions for areas of improvement either through changes to existing methods or through addition of new equipment or systems. General: Maintain a clean, organised, and safe work environment in accordance with company safety procedures. Ensure all work is performed to defined quality standards and within required timelines as agreed with through daily alignment with engineering and operational leadership teams. Perform other duties as assigned by management, including participation in special projects or cross-functional support activities. Key Requirements: Proficient in manual machining (lathe, mill, cylindrical grinding). Experience in die set maintenance and inspection in a manufacturing setting. Hands-on experience with Hurco CNC machines and bar feed equipment. Including setup of tool turret/carrousels and bar feed system programming. Familiarity with Fanuc CNC controls and basic troubleshooting. Competent in the maintenance and functional assessment of jigs and fixture systems. Ability to interpret technical drawings, blueprints, and tolerance specifications. Good understanding of CNC programming and machine operation practices. Strong organisational and problem-solving skills with the ability to work independently. Technical certificate, apprenticeship, or associate degree in machining, toolmaking, or a related field preferred. Minimum of 5 years' experience in a tooling, machining, or maintenance role. The Package: Competitive salary on offer, working just day shift. 37.5 hours per week, 5 days per week (Monday to Friday 08:30am to 4:30pm). Company pension scheme. Private health care. Life assurance. Quarterly bonus scheme potential. Additional benefits.
Oct 16, 2025
Full time
Baltic Recruitment are delighted to be partnering with OsecoElfab, a global manufacturer of customised rupture discs and explosion vents with their search for a Tooling & Machining Engineer. Overall Purpose: Responsible for the maintenance, repair, and refurbishment of production tooling through the use of manual lathes, mills, and cylindrical grinders to restore and maintain tooling components and cutting blades to operational standards. The role also includes the maintenance and inspection of die sets, setup and upkeep of CNC systems, and the ongoing management of jigs and fixture systems used across multiple production cells along with development of these for current and future products. Key Duties: Manual Machining and Tool Refurbishment: Operate manual machine tools including lathe, vertical mill, and cylindrical grinder to refurbish and maintain tooling and blade components. Evaluate tooling condition and carry out dimensional restoration and rework as required. Maintain records of tooling refurbishment, including measurements, wear assessments, and repair history. Die Set Maintenance and Inspection: Perform routine and preventive maintenance on die sets, including disassembly, cleaning, inspection, and reassembly. Identify and rectify wear, damage, or misalignment in die components to prevent unplanned downtime. Assist with root cause analysis of die-related faults and contribute to corrective actions. CNC Machine Setup and Maintenance: Set up, operate, and maintain Hurco CNC lathe and associated bar feed systems. Perform adjustments to tool offsets, feeds, and speeds to maintain consistent product quality and optimise cycle times. Conduct periodic checks and coordinate maintenance of CNC equipment to ensure reliability. Production CNC System Support: Provide support for CNC production equipment utilising Fanuc controls. Perform basic diagnostics, machine adjustments, and process checks during production. Assist in minor program edits to optimise cycle times and reduce tool wear. Jigs and Fixture Systems: Responsible for the maintenance, inspection, repair and overhaul of jigs and fixture systems used across various production cells. Assess fixture wear, alignment, and operational condition, and perform necessary repairs or adjustments. Collaborate with production and engineering teams to improve fixture functionality and support process stability. Technical Support Provide engineering technical support to a range of mechanical and process issues suggesting changes or improvements where necessary to include some maintenance work where necessary. Responsible for setup and upkeep of onsite tool room area including housekeeping, stock management of cutting tools and spare parts and Optimisation of existing processes and equipment and where appropriate develop suggestions for areas of improvement either through changes to existing methods or through addition of new equipment or systems. General: Maintain a clean, organised, and safe work environment in accordance with company safety procedures. Ensure all work is performed to defined quality standards and within required timelines as agreed with through daily alignment with engineering and operational leadership teams. Perform other duties as assigned by management, including participation in special projects or cross-functional support activities. Key Requirements: Proficient in manual machining (lathe, mill, cylindrical grinding). Experience in die set maintenance and inspection in a manufacturing setting. Hands-on experience with Hurco CNC machines and bar feed equipment. Including setup of tool turret/carrousels and bar feed system programming. Familiarity with Fanuc CNC controls and basic troubleshooting. Competent in the maintenance and functional assessment of jigs and fixture systems. Ability to interpret technical drawings, blueprints, and tolerance specifications. Good understanding of CNC programming and machine operation practices. Strong organisational and problem-solving skills with the ability to work independently. Technical certificate, apprenticeship, or associate degree in machining, toolmaking, or a related field preferred. Minimum of 5 years' experience in a tooling, machining, or maintenance role. The Package: Competitive salary on offer, working just day shift. 37.5 hours per week, 5 days per week (Monday to Friday 08:30am to 4:30pm). Company pension scheme. Private health care. Life assurance. Quarterly bonus scheme potential. Additional benefits.
MB723: Electrically Biased Maintenance Engineer Location: Wrexham Salary: £38,300 Working Hours: Mon to Fri 8.30am to 4.30pm + Overtime opportunities Company Benefits: Generous holiday allowance, Contributory pension scheme with life assurance, Employee share scheme , Employee shopping savings portal, Payment of Professional Fees Overview: First Military Recruitment is proudly working in partnership with a fantastic refrigeration business who are looking to recruit a Electrically Biased Maintenance Engineer to support the upkeep and maintenance of their internal factory plant equipment. This is a permanent position located at their depot in Wrexham. Duties and Responsibilities: Carry out work assignments issued and maximize effectiveness of the shift at all times by ensuring efficient completion of tasks. Demonstrate a team approach with regard to maintenance and hygiene of equipment and support (teams of) Logistics. Provide support to the team during breaks and absences and work together to ensure completion of their duties. Follow all work instructions, procedures, job descriptions at all times. Ensure that all Work Orders, PM s issued to the shift are completed. Complete and check all necessary paper work. Work with other functions as part of the manufacturing team to ensure efficient running of the site and carry out prioritized work as agreed. Carry out the assigned activities to meet operational targets; working with other functions to ensure mutual objectives are met. Compliance with Company policies, procedures and regulations (e.g. attendance, quality, safety, GMP s, etc.) and ensure these are followed to maintain the required standards (e.g. Food Safety, PPE etc.). Resolve mechanical and/or electrical problems in a timely fashion. Order spare parts as required on shift if unavailable from stock and contact contractors/suppliers as required in order to resolve problems on shift. Ensure all parts removed from stores while on shift are booked out of stores in the correct way. Where necessary, must initiate the purchase of parts or equipment completing the relevant order requisition forms with relevant information. Provide the Engineering manager with information on all engineering downtime attended on shift, related quality issue, work orders completed, PM s completed and other details as required. Identify and analyse problems before crises and determine appropriate action and follow up. Ensure remedial works on site is raised by work order or PM s are highlighted to the Manager. Work closely with Logistics teams. Work under supervision of engineering managers. Ensure that handovers are smooth and efficient whilst sharing relevant information with other engineers. Request/give information from/to the engineering manager Capable of instructing un-skilled/semi-skilled people in simple operations of equipment. Use of power tools, drills, grinders, cutting equipment, saws, files, presses. Use of ladders, steps, walkways. May have to work with hot/cold equipment using suitable safe systems of work and/or PPE. Skills and Qualifications: Previous manufacturing / processing / warehouse / cold-store industry experience. Electrical bias, electrical qualifications/time served apprenticeship. 4 years experience A good standard of both written and oral English. Basic Health & Safety. Data and analytical skills. Computer literate. (word/excel/windows based packages). Desirable skills: PLC knowledge. Working on hydraulic systems. Working on temperature control systems. Working with instrumentation systems. Welding experience. FLT/MEWP license. MB723: Electrically Biased Maintenance Engineer Location: Wrexham Salary: £38,300 Working Hours: Mon to Fri 8.30am to 4.30pm + Overtime opportunities Company Benefits: Generous holiday allowance, Contributory pension scheme with life assurance, Employee share scheme , Employee shopping savings portal, Payment of Professional Fees
Oct 16, 2025
Full time
MB723: Electrically Biased Maintenance Engineer Location: Wrexham Salary: £38,300 Working Hours: Mon to Fri 8.30am to 4.30pm + Overtime opportunities Company Benefits: Generous holiday allowance, Contributory pension scheme with life assurance, Employee share scheme , Employee shopping savings portal, Payment of Professional Fees Overview: First Military Recruitment is proudly working in partnership with a fantastic refrigeration business who are looking to recruit a Electrically Biased Maintenance Engineer to support the upkeep and maintenance of their internal factory plant equipment. This is a permanent position located at their depot in Wrexham. Duties and Responsibilities: Carry out work assignments issued and maximize effectiveness of the shift at all times by ensuring efficient completion of tasks. Demonstrate a team approach with regard to maintenance and hygiene of equipment and support (teams of) Logistics. Provide support to the team during breaks and absences and work together to ensure completion of their duties. Follow all work instructions, procedures, job descriptions at all times. Ensure that all Work Orders, PM s issued to the shift are completed. Complete and check all necessary paper work. Work with other functions as part of the manufacturing team to ensure efficient running of the site and carry out prioritized work as agreed. Carry out the assigned activities to meet operational targets; working with other functions to ensure mutual objectives are met. Compliance with Company policies, procedures and regulations (e.g. attendance, quality, safety, GMP s, etc.) and ensure these are followed to maintain the required standards (e.g. Food Safety, PPE etc.). Resolve mechanical and/or electrical problems in a timely fashion. Order spare parts as required on shift if unavailable from stock and contact contractors/suppliers as required in order to resolve problems on shift. Ensure all parts removed from stores while on shift are booked out of stores in the correct way. Where necessary, must initiate the purchase of parts or equipment completing the relevant order requisition forms with relevant information. Provide the Engineering manager with information on all engineering downtime attended on shift, related quality issue, work orders completed, PM s completed and other details as required. Identify and analyse problems before crises and determine appropriate action and follow up. Ensure remedial works on site is raised by work order or PM s are highlighted to the Manager. Work closely with Logistics teams. Work under supervision of engineering managers. Ensure that handovers are smooth and efficient whilst sharing relevant information with other engineers. Request/give information from/to the engineering manager Capable of instructing un-skilled/semi-skilled people in simple operations of equipment. Use of power tools, drills, grinders, cutting equipment, saws, files, presses. Use of ladders, steps, walkways. May have to work with hot/cold equipment using suitable safe systems of work and/or PPE. Skills and Qualifications: Previous manufacturing / processing / warehouse / cold-store industry experience. Electrical bias, electrical qualifications/time served apprenticeship. 4 years experience A good standard of both written and oral English. Basic Health & Safety. Data and analytical skills. Computer literate. (word/excel/windows based packages). Desirable skills: PLC knowledge. Working on hydraulic systems. Working on temperature control systems. Working with instrumentation systems. Welding experience. FLT/MEWP license. MB723: Electrically Biased Maintenance Engineer Location: Wrexham Salary: £38,300 Working Hours: Mon to Fri 8.30am to 4.30pm + Overtime opportunities Company Benefits: Generous holiday allowance, Contributory pension scheme with life assurance, Employee share scheme , Employee shopping savings portal, Payment of Professional Fees
An established manufacturer of security shop fronts based in Birmingham requires an experienced site labourer / van driver. Duties: You will be delivering shop front material to sites thoughout the UK in a 3.5 tonne van. Working in the factory when not required for driving. Collecting goods from suppliers. Ensuring vehicle is kept road worthy and safe at all times. On site you will be assisting the shop fitter using hand and power tools. Cutting wood to length, screwing in fittings, using an angle grinder and other hand tools. Removing all waste from site and disposing into allocated skips. This job involves manual handling and would suit someone with experience of site work. There are 1 to 2 paid nights out a week. Requirements: Full UK driving licence with less than six points. CSCS card required. Advanced DBS check required. Delivery van experience. Labouring, use of hand and power tools, and manual handling experience. Hours: Monday to Friday, 42.5 hours to 55 hours per week, Early starts. Overtime may be available. This is a permanent position that starts immediately.
Oct 16, 2025
Full time
An established manufacturer of security shop fronts based in Birmingham requires an experienced site labourer / van driver. Duties: You will be delivering shop front material to sites thoughout the UK in a 3.5 tonne van. Working in the factory when not required for driving. Collecting goods from suppliers. Ensuring vehicle is kept road worthy and safe at all times. On site you will be assisting the shop fitter using hand and power tools. Cutting wood to length, screwing in fittings, using an angle grinder and other hand tools. Removing all waste from site and disposing into allocated skips. This job involves manual handling and would suit someone with experience of site work. There are 1 to 2 paid nights out a week. Requirements: Full UK driving licence with less than six points. CSCS card required. Advanced DBS check required. Delivery van experience. Labouring, use of hand and power tools, and manual handling experience. Hours: Monday to Friday, 42.5 hours to 55 hours per week, Early starts. Overtime may be available. This is a permanent position that starts immediately.
Are you an experienced Surface Grinder / Machinist looking for a secure, long-term role with a company that values skill, precision, and teamwork? Hours: Mon-Thurs: 14:30 to 22:30 ( hour lunch) Fri: 12:20 to 20:00 Join a leading engineering manufacturer producing high-quality components used in specialist industrial applications, where craftsmanship and accuracy are key. Why You'll Love This Role Be part of a skilled, close-knit team where your work makes a real impact. Work with high-performance materials including Inconel, stainless steels, carbon, and composites. Enjoy stable, long-term employment with opportunities to develop your technical expertise. Contribute to a business proud of its innovation, quality, and people-first culture. What You'll Be Doing Operating surface grinding, milling, drilling, and lapping machines to precise specifications. Producing high-tolerance components for critical industrial applications. Working from engineering drawings and using a range of precision measuring tools. Collaborating with the team to meet on-time delivery (OTIF) targets. Maintaining a safe, tidy, and efficient workshop environment. Supporting continuous improvement initiatives and process enhancements. What We're Looking For Good experience in a toolroom or precision engineering environment. Skilled in surface grinding operations and comfortable with other manual machining duties. Strong ability to read and interpret technical drawings. Understanding of Health & Safety practices in a workshop setting. A proactive team player with strong communication and problem-solving skills. Bonus Skills (not essential): Assembly or fitting experience. Apprenticeship or college-level qualification in mechanical engineering (or equivalent). What's on Offer Competitive salary with shift allowance. Permanent, secure position in a respected engineering business. Late shift hours offering flexibility and work-life balance. Ongoing training and career development opportunities. Supportive, collaborative culture where your contributions are valued. If you're a Surface Grinder / Machinist who takes pride in precision, craftsmanship, and quality, we'd love to hear from you. Apply today to join a company that's as passionate about engineering excellence as you are.
Oct 16, 2025
Full time
Are you an experienced Surface Grinder / Machinist looking for a secure, long-term role with a company that values skill, precision, and teamwork? Hours: Mon-Thurs: 14:30 to 22:30 ( hour lunch) Fri: 12:20 to 20:00 Join a leading engineering manufacturer producing high-quality components used in specialist industrial applications, where craftsmanship and accuracy are key. Why You'll Love This Role Be part of a skilled, close-knit team where your work makes a real impact. Work with high-performance materials including Inconel, stainless steels, carbon, and composites. Enjoy stable, long-term employment with opportunities to develop your technical expertise. Contribute to a business proud of its innovation, quality, and people-first culture. What You'll Be Doing Operating surface grinding, milling, drilling, and lapping machines to precise specifications. Producing high-tolerance components for critical industrial applications. Working from engineering drawings and using a range of precision measuring tools. Collaborating with the team to meet on-time delivery (OTIF) targets. Maintaining a safe, tidy, and efficient workshop environment. Supporting continuous improvement initiatives and process enhancements. What We're Looking For Good experience in a toolroom or precision engineering environment. Skilled in surface grinding operations and comfortable with other manual machining duties. Strong ability to read and interpret technical drawings. Understanding of Health & Safety practices in a workshop setting. A proactive team player with strong communication and problem-solving skills. Bonus Skills (not essential): Assembly or fitting experience. Apprenticeship or college-level qualification in mechanical engineering (or equivalent). What's on Offer Competitive salary with shift allowance. Permanent, secure position in a respected engineering business. Late shift hours offering flexibility and work-life balance. Ongoing training and career development opportunities. Supportive, collaborative culture where your contributions are valued. If you're a Surface Grinder / Machinist who takes pride in precision, craftsmanship, and quality, we'd love to hear from you. Apply today to join a company that's as passionate about engineering excellence as you are.
Job Title: Polisher Level 1 (Nights) Location: Droitwich Spa Pay Rates: £15.29 Shift Pattern: Sunday to Thursday, 9:35 PM 5:45 AM Role Summary We have an exciting opportunity for a skilled Polisher Level 1 to join a world-renowned precision manufacturing company in Droitwich Spa. This full-time role focuses on polishing and finishing high-spec metal components to meet strict quality standards. It's perfect for someone with hands-on experience in metal finishing, casting, or similar environments. Shift Pattern Sunday to Thursday, 9:35 PM 5:45 AM Main Responsibilities Carry out polishing tasks including: Aerofoil (basic and complex) Radius (basic and complex) Edge finishing (leading/trailing) Core exit flash removal Inter vane and shroud polishing Deburring using small and large power grinders Use precision measuring tools to check and adjust components Select and replace polishing belts as needed Record job progress in the internal system Work closely with the inspection team to maintain quality standards Follow all health, safety, and environmental rules Support training and contribute to continuous improvement initiatives Skills & Qualities Required Previous experience in polishing or detailed metal finishing Confident using air tools, grinders, and linishing equipment Able to read and follow technical instructions Physically fit and capable of standing for long periods Good hand-eye coordination and attention to detail Strong communication and basic IT skills Preferred Experience Background in casting, metalwork, or automotive industries Experience working in fast-paced, precision-driven environments How to Apply Call (phone number removed) and ask for Alex or Freddie Or send your CV directly Immediate starts available for the right candidates
Oct 16, 2025
Seasonal
Job Title: Polisher Level 1 (Nights) Location: Droitwich Spa Pay Rates: £15.29 Shift Pattern: Sunday to Thursday, 9:35 PM 5:45 AM Role Summary We have an exciting opportunity for a skilled Polisher Level 1 to join a world-renowned precision manufacturing company in Droitwich Spa. This full-time role focuses on polishing and finishing high-spec metal components to meet strict quality standards. It's perfect for someone with hands-on experience in metal finishing, casting, or similar environments. Shift Pattern Sunday to Thursday, 9:35 PM 5:45 AM Main Responsibilities Carry out polishing tasks including: Aerofoil (basic and complex) Radius (basic and complex) Edge finishing (leading/trailing) Core exit flash removal Inter vane and shroud polishing Deburring using small and large power grinders Use precision measuring tools to check and adjust components Select and replace polishing belts as needed Record job progress in the internal system Work closely with the inspection team to maintain quality standards Follow all health, safety, and environmental rules Support training and contribute to continuous improvement initiatives Skills & Qualities Required Previous experience in polishing or detailed metal finishing Confident using air tools, grinders, and linishing equipment Able to read and follow technical instructions Physically fit and capable of standing for long periods Good hand-eye coordination and attention to detail Strong communication and basic IT skills Preferred Experience Background in casting, metalwork, or automotive industries Experience working in fast-paced, precision-driven environments How to Apply Call (phone number removed) and ask for Alex or Freddie Or send your CV directly Immediate starts available for the right candidates
Proactive Global currently is looking for a Labourer/Sheet metal worker to join one of our customers based in Feltham - TW13 12.50 - 13 PER HOUR Feltham - TW13 Major Accountabilities To assist with operating the Waterjet machines. Loading and unloading sheet metal using lifting equipment. To de-bur and "clean-up" metal parts using handheld grinder and linisher. To assist with the maintenance and upkeep of the Waterjet machines, as well as their pumps. Reading and deciphering engineering drawings. To liaise with the design engineers to ensure that work carried out is accurate, resolving issues as they arise. To be available for evening and weekend work when the business requires it. Supporting other employees as required and if you are safe/trained to do so. Maintaining a safe and tidy workplace and reporting any faults/hazards, in accordance with Company Health and Safety requirements. Any other duties determined by the Team Leader or Line Manager. Key competencies: Assisting machine operation. Basic maintenance skills (pipe and pump work especially). Using hand tools and basic power tools. Ability to read and work from engineering drawings. Able to keep working area clean. Work as part of a team. Possess excellent communication skills. Reasons why you should apply: If you are looking to work with a manufacturing company . How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Swati Chauhan "(phone number removed)"submit your CV to (url removed) Why work with Proactive Global? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Oct 16, 2025
Contractor
Proactive Global currently is looking for a Labourer/Sheet metal worker to join one of our customers based in Feltham - TW13 12.50 - 13 PER HOUR Feltham - TW13 Major Accountabilities To assist with operating the Waterjet machines. Loading and unloading sheet metal using lifting equipment. To de-bur and "clean-up" metal parts using handheld grinder and linisher. To assist with the maintenance and upkeep of the Waterjet machines, as well as their pumps. Reading and deciphering engineering drawings. To liaise with the design engineers to ensure that work carried out is accurate, resolving issues as they arise. To be available for evening and weekend work when the business requires it. Supporting other employees as required and if you are safe/trained to do so. Maintaining a safe and tidy workplace and reporting any faults/hazards, in accordance with Company Health and Safety requirements. Any other duties determined by the Team Leader or Line Manager. Key competencies: Assisting machine operation. Basic maintenance skills (pipe and pump work especially). Using hand tools and basic power tools. Ability to read and work from engineering drawings. Able to keep working area clean. Work as part of a team. Possess excellent communication skills. Reasons why you should apply: If you are looking to work with a manufacturing company . How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Swati Chauhan "(phone number removed)"submit your CV to (url removed) Why work with Proactive Global? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Team Recruitment (ABERDEEN) Ltd
Aberdeen, Aberdeenshire
Temporary to Permanent Position. onshore, candidates must have the right to work in the UK Main Responsibilities Measure and cut / shape / bend steel piping sections to size / tolerance as required. Prep steel pipes for fabrication as required. Fabricate and assemble Piping fabrications. Install & secure using supports / brackets piping systems as per customer requirements. Undertake welding processes GTAW, SMAW, GMAW and FCAW in various positions. (As Qualified) Carry out welding processes to ISO, ASME and AWS standards (As Qualified) Tack weld pipework fabrications (Carbon Steel, Stainless Steel, Duplex, Cunifer and Aluminium). Maintain a safe and tidy working environment and make appropriate use of PPE at all times. Work to the requirements of CDM regulations 2015 when applicable. Work to HSE ACOPs, customer rules & specifications, company work instructions and route cards at all times. Represent the company in a professional manner at all times, whether on customer sites or at college. Carry out any other reasonable task / activities as requested by Manager or delegate. Skills and Abilities Ability to learn and adapt to the requirements of the role. Ability to read and interpret engineering drawings and BOMs. Ability to use calibrated equipment for accurate measurement and dimensional checking. Proficient with hand and power tools, pipefitters' tools, grinders, cutting torches etc Accurate alignment and fitting of pipes using supports, clamps and hangers Problem solving with the ability to identify and resolve issues on the job site quickly Possess a high level of focus and attention to detail and accuracy. Organisational ability and time management skills. Demonstrated self-starter with high initiative and the ability to work independently and as part of a team. Advanced conversational and written English/high level interpersonal skills Comfortable working at height and in confined spaces. Able to work away from home as required. Able to work overtime, periodic weekends and night shift if needed. Knowledge & Experience Minimum SVQ level 3 or equivalent or higher in relevant trade qualification Preferred (5) years practical experience working in an engineering environment. Preferred (5) years practical experience of working with hand & power tools. Preferred experience working on CDM worksites. Preferred working knowledge of ISO 9001, ISO 14001 and OHSAS 45001 Preferred Full clean driving licence. Knowledge of hydrostatic and pneumatic testing procedures Preferred working knowledge of ISO 9001, ISO 14001 and ISO 45001
Oct 15, 2025
Contractor
Temporary to Permanent Position. onshore, candidates must have the right to work in the UK Main Responsibilities Measure and cut / shape / bend steel piping sections to size / tolerance as required. Prep steel pipes for fabrication as required. Fabricate and assemble Piping fabrications. Install & secure using supports / brackets piping systems as per customer requirements. Undertake welding processes GTAW, SMAW, GMAW and FCAW in various positions. (As Qualified) Carry out welding processes to ISO, ASME and AWS standards (As Qualified) Tack weld pipework fabrications (Carbon Steel, Stainless Steel, Duplex, Cunifer and Aluminium). Maintain a safe and tidy working environment and make appropriate use of PPE at all times. Work to the requirements of CDM regulations 2015 when applicable. Work to HSE ACOPs, customer rules & specifications, company work instructions and route cards at all times. Represent the company in a professional manner at all times, whether on customer sites or at college. Carry out any other reasonable task / activities as requested by Manager or delegate. Skills and Abilities Ability to learn and adapt to the requirements of the role. Ability to read and interpret engineering drawings and BOMs. Ability to use calibrated equipment for accurate measurement and dimensional checking. Proficient with hand and power tools, pipefitters' tools, grinders, cutting torches etc Accurate alignment and fitting of pipes using supports, clamps and hangers Problem solving with the ability to identify and resolve issues on the job site quickly Possess a high level of focus and attention to detail and accuracy. Organisational ability and time management skills. Demonstrated self-starter with high initiative and the ability to work independently and as part of a team. Advanced conversational and written English/high level interpersonal skills Comfortable working at height and in confined spaces. Able to work away from home as required. Able to work overtime, periodic weekends and night shift if needed. Knowledge & Experience Minimum SVQ level 3 or equivalent or higher in relevant trade qualification Preferred (5) years practical experience working in an engineering environment. Preferred (5) years practical experience of working with hand & power tools. Preferred experience working on CDM worksites. Preferred working knowledge of ISO 9001, ISO 14001 and OHSAS 45001 Preferred Full clean driving licence. Knowledge of hydrostatic and pneumatic testing procedures Preferred working knowledge of ISO 9001, ISO 14001 and ISO 45001
Bennett and Game Recruitment LTD
Rustington, Sussex
Manual Machinist required for my client who work within the electronics engineering industry, based in Littlehampton. This is mainly a hands-on position but the successful candidate would need to speak to suppliers about any components that are outside specification and to the companies used for tooling repairs or modification. Training will be given where appropriate but the candidate will ideally have worked as a toolmaker or manual machinist previously. Manual Machinist Job Overview Use trigonometry and other geometric functions for design projects Perform milling/cutting operations for low volume stock parts as required Repair/adjust production line equipment when required Support Mould Shop staff with some tool changeovers/ training Liaise with external suppliers of tooling services for press and mould tools Manual Machinist Job Requirements Qualified and experienced with manual toolroom machinery: Mill, lathe, Grinder, Britan, Power press. Experienced with small part Mould and Press Tools and able to: read technical drawings, identify, design, and assemble relevant special hand/press tools Previous experience as manual machinist or toolmaker Commutable distance of Littlehampton Manual Machinist Salary & Benefits Salary- 35k - 45k dependent upon experience Death In Service insurance Contributory pension with Standard Life 2.25% employee 4.25 % employer Holidays start at 20 days + bank holidays increasing to 25 days +BH after three years Holidays partly allocated for summer and winter shutdowns - not more than 10 days Hours, Monday - Thursday 8.15 am - 5 pm, Friday 8.15 am - 1 pm 30 minutes lunch Extra hours may be necessary to meet important deadlines. Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Oct 15, 2025
Full time
Manual Machinist required for my client who work within the electronics engineering industry, based in Littlehampton. This is mainly a hands-on position but the successful candidate would need to speak to suppliers about any components that are outside specification and to the companies used for tooling repairs or modification. Training will be given where appropriate but the candidate will ideally have worked as a toolmaker or manual machinist previously. Manual Machinist Job Overview Use trigonometry and other geometric functions for design projects Perform milling/cutting operations for low volume stock parts as required Repair/adjust production line equipment when required Support Mould Shop staff with some tool changeovers/ training Liaise with external suppliers of tooling services for press and mould tools Manual Machinist Job Requirements Qualified and experienced with manual toolroom machinery: Mill, lathe, Grinder, Britan, Power press. Experienced with small part Mould and Press Tools and able to: read technical drawings, identify, design, and assemble relevant special hand/press tools Previous experience as manual machinist or toolmaker Commutable distance of Littlehampton Manual Machinist Salary & Benefits Salary- 35k - 45k dependent upon experience Death In Service insurance Contributory pension with Standard Life 2.25% employee 4.25 % employer Holidays start at 20 days + bank holidays increasing to 25 days +BH after three years Holidays partly allocated for summer and winter shutdowns - not more than 10 days Hours, Monday - Thursday 8.15 am - 5 pm, Friday 8.15 am - 1 pm 30 minutes lunch Extra hours may be necessary to meet important deadlines. Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
What's in it for you? Paying up to 12.50- 14.00 per hour depends on experience Monday to Friday -morning shift Onsite parking Full training given Canteen facilities My Client is well established, industry leading fabrication company. Based in Thirsk area, they have seen year on year success, with further growth plans for 2025/2026. They offer a range of services from Design through to Manufacturing. This has given the company opportunities to service a multitude of sectors, with a diverse client base stretching across the globe. An exciting opportunity has arisen for a number General Operative to join their team on a Temporary to Permanent basis. General Operative Main Duties: General assembly Operative work Quality Checking Working in a target driven environment Assisting fabricators Working with hand tools (angle grinder, metal polisher) Lifting and bending Working in a very manual industrial environment Role Requirements: Experience of working in a metal l manufacturing environment Excellent communication Ability to learn new skills Ability to inspect own work Expect high standards from yourself Good attitude If you have the experience required then please get in contact with us to discuss further with a member of our team on (phone number removed). INDTW
Oct 15, 2025
Full time
What's in it for you? Paying up to 12.50- 14.00 per hour depends on experience Monday to Friday -morning shift Onsite parking Full training given Canteen facilities My Client is well established, industry leading fabrication company. Based in Thirsk area, they have seen year on year success, with further growth plans for 2025/2026. They offer a range of services from Design through to Manufacturing. This has given the company opportunities to service a multitude of sectors, with a diverse client base stretching across the globe. An exciting opportunity has arisen for a number General Operative to join their team on a Temporary to Permanent basis. General Operative Main Duties: General assembly Operative work Quality Checking Working in a target driven environment Assisting fabricators Working with hand tools (angle grinder, metal polisher) Lifting and bending Working in a very manual industrial environment Role Requirements: Experience of working in a metal l manufacturing environment Excellent communication Ability to learn new skills Ability to inspect own work Expect high standards from yourself Good attitude If you have the experience required then please get in contact with us to discuss further with a member of our team on (phone number removed). INDTW
Skilled Hard Landscaper - Devon Are you a passionate and dependable Hard Landscaper based in Devon, looking for a rewarding role in a supportive and dynamic work environment? We're seeking motivated and experienced individuals to manage and inspire teams across multiple sites, ensuring the delivery of high-quality hard landscaping and groundworks that exceed client expectations. About the Company: Our client is a leading name in the landscaping industry, with expertise across both hard and soft landscaping. As part of their continued growth, they are now looking to recruit a Skilled Hard Landscaper to join their expanding team. Role Responsibilities: As a Skilled Hard Landscaper, you will be expected to take initiative and coordinate resources effectively to deliver high-standard projects. Key duties include: Setting levels and site excavation Groundwork preparation and base/foundation construction Laying paving slabs, block paving, and stone setts Building walls using brick, dry stone, stone-facing, tier walling, and steps Constructing, lining, and dressing water features Key Requirements: The ideal candidate will have: A strong track record in all aspects of hard landscaping A proactive attitude and team-oriented mindset Minimum 5 years of experience in the landscaping industry Confidence using power tools such as 360 excavators, dumpers, rotovators, grinders, disc cutters, and circular saws A valid CSCS card (preferred) Experience operating a range of machinery Excellent knowledge and application of Health & Safety standards A commitment to delivering quality work to meet customer specifications A results-driven approach with a focus on exceeding expectations What's on Offer: Competitive salary (dependent on experience) A professional and supportive working environment A work-hard, play-hard team culture Opportunities for long-term growth and development Ready to Join? If you're ready to take the next step in your landscaping career, we'd love to hear from you. Please upload your CV to apply.
Oct 15, 2025
Full time
Skilled Hard Landscaper - Devon Are you a passionate and dependable Hard Landscaper based in Devon, looking for a rewarding role in a supportive and dynamic work environment? We're seeking motivated and experienced individuals to manage and inspire teams across multiple sites, ensuring the delivery of high-quality hard landscaping and groundworks that exceed client expectations. About the Company: Our client is a leading name in the landscaping industry, with expertise across both hard and soft landscaping. As part of their continued growth, they are now looking to recruit a Skilled Hard Landscaper to join their expanding team. Role Responsibilities: As a Skilled Hard Landscaper, you will be expected to take initiative and coordinate resources effectively to deliver high-standard projects. Key duties include: Setting levels and site excavation Groundwork preparation and base/foundation construction Laying paving slabs, block paving, and stone setts Building walls using brick, dry stone, stone-facing, tier walling, and steps Constructing, lining, and dressing water features Key Requirements: The ideal candidate will have: A strong track record in all aspects of hard landscaping A proactive attitude and team-oriented mindset Minimum 5 years of experience in the landscaping industry Confidence using power tools such as 360 excavators, dumpers, rotovators, grinders, disc cutters, and circular saws A valid CSCS card (preferred) Experience operating a range of machinery Excellent knowledge and application of Health & Safety standards A commitment to delivering quality work to meet customer specifications A results-driven approach with a focus on exceeding expectations What's on Offer: Competitive salary (dependent on experience) A professional and supportive working environment A work-hard, play-hard team culture Opportunities for long-term growth and development Ready to Join? If you're ready to take the next step in your landscaping career, we'd love to hear from you. Please upload your CV to apply.
TIG Welders job opportunity with this large successful and established precision engineering company. This permanent job operates on a full time hours, 4 day week, so every Friday off! Key Duties: Perform precise TIG welding on stainless, mild and aluminium, typically utilising materials with thicknesses of 1mm to 3mm while using a foot pedal. Carry out welding on box section frames and assemblies, maintaining high standards and tight tolerances. Skillfully finish and dress your completed work using various hand tools, including electric angle grinders and pneumatic orbital sanders, to meet quality expectations. Ensure that all produced components conform to the provided drawings and work instructions. Complete your tasks within the designated time-frames to optimise production efficiency. Participate in the development of new products based on customer specifications for light to medium fabrications, with the capability to create your own jigs and fixtures as necessary. Execute general sheet metal work and finishing duties to support the fabrication team. About You: You have a strong background in TIG welding. Used to working in a high precision, highly regulated industry. You are capable of reading engineering drawings. You can work well in a team. This is a permanent job with a starting salary dependent on experience. You must have current UK right to work to be considered. HRGO are a recruitment agency supporting UK Manufacturing. We aim to respond to all applications.
Oct 09, 2025
Full time
TIG Welders job opportunity with this large successful and established precision engineering company. This permanent job operates on a full time hours, 4 day week, so every Friday off! Key Duties: Perform precise TIG welding on stainless, mild and aluminium, typically utilising materials with thicknesses of 1mm to 3mm while using a foot pedal. Carry out welding on box section frames and assemblies, maintaining high standards and tight tolerances. Skillfully finish and dress your completed work using various hand tools, including electric angle grinders and pneumatic orbital sanders, to meet quality expectations. Ensure that all produced components conform to the provided drawings and work instructions. Complete your tasks within the designated time-frames to optimise production efficiency. Participate in the development of new products based on customer specifications for light to medium fabrications, with the capability to create your own jigs and fixtures as necessary. Execute general sheet metal work and finishing duties to support the fabrication team. About You: You have a strong background in TIG welding. Used to working in a high precision, highly regulated industry. You are capable of reading engineering drawings. You can work well in a team. This is a permanent job with a starting salary dependent on experience. You must have current UK right to work to be considered. HRGO are a recruitment agency supporting UK Manufacturing. We aim to respond to all applications.
Metal-core arc welders wanted! (MCAW process) 10-Month Contract 4-Day Week Great Rates 26 Days PAYE 31 Nights PAYE Premium rate overtime available Digs allowance (if commuting over 50 miles) Working hours : DAYS Monday-Thursday: 06:30-18:00 NIGHTS Monday-Thursday: 19:10-06:40 Ready to get stuck into a well-paid contract without giving up your weekends? We've got an exciting opportunity for experienced Pipe Welders to join a dynamic project based in Thirsk- with excellent day and night rates, a 4-day working week, and digs support for those travelling in. What's on Offer: 10-month contract - steady work through the year 4-day week - Monday to Thursday only Great rates : 26.00 per hour Days (PAYE) 31.00 per hour Nights (PAYE) Overtime available digs allowance if you live over 50 miles away from site Shifts Available: Day Shift : 06:30 - 18:00 (Monday to Thursday) Night Shift : 19:10 - 06:40 (Monday to Thursday) (30 mins paid + 30 mins unpaid break) The Role: We're looking for highly skilled Pipe Welders with strong offshore or heavy industrial experience. You'll be performing high-precision welding in multiple positions on carbon and alloy steels, working to tight specs and delivering top-tier results every time. Duties include: Welding using MCAW - Metal core arc welding process Reading and working from WPS and engineering drawings Performing structural and pressure welds with confidence Completing fillet and full-pen butt welds to spec Maintaining full compliance with quality and traceability standards Using grinders, gougers, and other tools for a high-quality finish What You'll Need: Proven experience in offshore, oil & gas, or marine welding Current or past weld certification in metal - core arc welding (MCAW) Able to interpret fabrication drawings and isometrics Strong QA/QC focus and able to pass trade tests Bonus if you have: Background in large-scale offshore or heavy fabrication projects Experience with self-checking and weld inspections Weld Tests & Interviews: Taking place from week commencing 13th October 2025. The weld test will consists of a Pipe-to-plate fillet and an inline butt weld. Interested and ready to get started? Click apply now or contact Dean Carthy at Employment Solutions for full details.
Oct 09, 2025
Contractor
Metal-core arc welders wanted! (MCAW process) 10-Month Contract 4-Day Week Great Rates 26 Days PAYE 31 Nights PAYE Premium rate overtime available Digs allowance (if commuting over 50 miles) Working hours : DAYS Monday-Thursday: 06:30-18:00 NIGHTS Monday-Thursday: 19:10-06:40 Ready to get stuck into a well-paid contract without giving up your weekends? We've got an exciting opportunity for experienced Pipe Welders to join a dynamic project based in Thirsk- with excellent day and night rates, a 4-day working week, and digs support for those travelling in. What's on Offer: 10-month contract - steady work through the year 4-day week - Monday to Thursday only Great rates : 26.00 per hour Days (PAYE) 31.00 per hour Nights (PAYE) Overtime available digs allowance if you live over 50 miles away from site Shifts Available: Day Shift : 06:30 - 18:00 (Monday to Thursday) Night Shift : 19:10 - 06:40 (Monday to Thursday) (30 mins paid + 30 mins unpaid break) The Role: We're looking for highly skilled Pipe Welders with strong offshore or heavy industrial experience. You'll be performing high-precision welding in multiple positions on carbon and alloy steels, working to tight specs and delivering top-tier results every time. Duties include: Welding using MCAW - Metal core arc welding process Reading and working from WPS and engineering drawings Performing structural and pressure welds with confidence Completing fillet and full-pen butt welds to spec Maintaining full compliance with quality and traceability standards Using grinders, gougers, and other tools for a high-quality finish What You'll Need: Proven experience in offshore, oil & gas, or marine welding Current or past weld certification in metal - core arc welding (MCAW) Able to interpret fabrication drawings and isometrics Strong QA/QC focus and able to pass trade tests Bonus if you have: Background in large-scale offshore or heavy fabrication projects Experience with self-checking and weld inspections Weld Tests & Interviews: Taking place from week commencing 13th October 2025. The weld test will consists of a Pipe-to-plate fillet and an inline butt weld. Interested and ready to get started? Click apply now or contact Dean Carthy at Employment Solutions for full details.
Quick Staff UK are recruiting a team of experienced Fabricator Welders to join our client s busy workshop on the outskirts of Bristol. This is a great opportunity for highly skilled individuals to join a long-established structural steel specialist, on a permanent basis, working on a wide variety of fabrication and welding projects. Key Responsibilities Read and interpret technical drawings and blueprints Fabricate and weld structural steel components using MIG, TIG, Stick, and coded welding techniques Work with stainless steel, aluminium, and mild steel Use hand and power tools (grinders, saws, drills) to prepare and finish workpieces Conduct quality control checks to ensure all structures meet required specifications Maintain welding equipment and perform basic maintenance checks Collaborate with team members to meet production targets and deadlines Key Requirements Minimum 5 years experience fabricating and welding structural steel Proficient in MIG, TIG, Stick, and coded welding Ability to read and interpret detailed engineering drawings Excellent attention to detail and commitment to quality Good teamwork and communication skills Physically fit and comfortable in a workshop environment Additional Info Hours or work: Monday to Thursday 07:15 - 16:30 Friday 07:45 - 12:45 Pay: £16.41/hr basic Enhanced Pay Rate: £17.41/hr after 5hrs overtime Overtime: Monday to Saturday £24.61/hr Sunday £32.82/hr With over 25 years experience, Quick Staff UK s team connects great people with great jobs nationwide from temporary shifts to long-term careers in manufacturing, office support, warehouse & distribution, and more. We review every application carefully, but only shortlisted candidates will be contacted. If you don t hear from us within 7 days, please don t be discouraged new opportunities come up regularly, and we d love to consider you for future roles. We are committed to building a diverse and inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, religion, gender, sexual orientation, disability, or age.
Oct 08, 2025
Full time
Quick Staff UK are recruiting a team of experienced Fabricator Welders to join our client s busy workshop on the outskirts of Bristol. This is a great opportunity for highly skilled individuals to join a long-established structural steel specialist, on a permanent basis, working on a wide variety of fabrication and welding projects. Key Responsibilities Read and interpret technical drawings and blueprints Fabricate and weld structural steel components using MIG, TIG, Stick, and coded welding techniques Work with stainless steel, aluminium, and mild steel Use hand and power tools (grinders, saws, drills) to prepare and finish workpieces Conduct quality control checks to ensure all structures meet required specifications Maintain welding equipment and perform basic maintenance checks Collaborate with team members to meet production targets and deadlines Key Requirements Minimum 5 years experience fabricating and welding structural steel Proficient in MIG, TIG, Stick, and coded welding Ability to read and interpret detailed engineering drawings Excellent attention to detail and commitment to quality Good teamwork and communication skills Physically fit and comfortable in a workshop environment Additional Info Hours or work: Monday to Thursday 07:15 - 16:30 Friday 07:45 - 12:45 Pay: £16.41/hr basic Enhanced Pay Rate: £17.41/hr after 5hrs overtime Overtime: Monday to Saturday £24.61/hr Sunday £32.82/hr With over 25 years experience, Quick Staff UK s team connects great people with great jobs nationwide from temporary shifts to long-term careers in manufacturing, office support, warehouse & distribution, and more. We review every application carefully, but only shortlisted candidates will be contacted. If you don t hear from us within 7 days, please don t be discouraged new opportunities come up regularly, and we d love to consider you for future roles. We are committed to building a diverse and inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, religion, gender, sexual orientation, disability, or age.
Mane Contract Services
Stoke-on-trent, Staffordshire
Join a manufacturing company based in Stoke-On-Trent. This is a fantastic opportunity for skilled professionals to work on a variety of vehicle projects, focusing on interior fitting and custom vehicle builds. Key Responsibilities: Perform interior fitting tasks on a range of trucks and specialist vehicles using materials such as wood, aluminium, and steel. Carry out interior and exterior coach building, including strip fitting, refurbishment, and assembly. Read and interpret engineering drawings and build instructions to complete projects to specification. Use a wide range of hand tools and power tools (e.g. drills, saws, rivet guns, grinders, spanners, screwdrivers). Key Requirements: Minimum 2+ years' experience in either: Coach building (vehicle fitting, bodywork, or custom interior builds), or Joinery / workshop experience , working with wood, metal, saws, and hand/power tools .
Oct 07, 2025
Contractor
Join a manufacturing company based in Stoke-On-Trent. This is a fantastic opportunity for skilled professionals to work on a variety of vehicle projects, focusing on interior fitting and custom vehicle builds. Key Responsibilities: Perform interior fitting tasks on a range of trucks and specialist vehicles using materials such as wood, aluminium, and steel. Carry out interior and exterior coach building, including strip fitting, refurbishment, and assembly. Read and interpret engineering drawings and build instructions to complete projects to specification. Use a wide range of hand tools and power tools (e.g. drills, saws, rivet guns, grinders, spanners, screwdrivers). Key Requirements: Minimum 2+ years' experience in either: Coach building (vehicle fitting, bodywork, or custom interior builds), or Joinery / workshop experience , working with wood, metal, saws, and hand/power tools .
Exciting Opportunity: Become a Welder/Brazer for a Leading Aerospace Company Are you an experienced Welder/Brazer looking to join a dynamic and innovative company? This is your chance to be a part of something truly remarkable. The Welder/Brazer role at this company is a unique opportunity to contribute to the production of world-class aerospace components and make a real difference. What You'll Be Doing as a Welder/Brazer Undertake a variety of welding and brazing operations required in the assembly of parts or sub-assemblies Carry out welding of aluminium, stainless steel, and mild steel to industry-leading standards Set and operate spot welders, and perform deburring, polishing, and cleaning tasks on all welding and brazing work Support the maintenance team with welding work as required Contribute to proof of concept and other development welding activities What We're Looking For Strong engineering background with experience in reading and interpreting engineering drawings Proficient in using measuring equipment, gas cutters, grinders, and Gas Tungsten Arc equipment Certified to BS EN:12797:2000 and AWSD17.1/D17.1M:2010-AMD1 standards Excellent problem-solving and attention to detail Ability to work collaboratively in a team environment Why Join This Company? This company is a leading manufacturer of ejection seats, dedicated to saving lives worldwide. As a Welder/Brazer, you'll have the opportunity to work alongside industry experts, develop new skills, and gain valuable experience in the aerospace industry. The company offers a highly competitive benefits package, including a 9% non-contributory pension scheme, 4x salary life assurance, and a personalised training and development plan. Apply Now If you're ready to take your career to new heights as a Welder/Brazer, we encourage you to apply today. Submit your application and let's discuss how you can become a vital part of this exciting and rewarding opportunity. Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
Oct 07, 2025
Full time
Exciting Opportunity: Become a Welder/Brazer for a Leading Aerospace Company Are you an experienced Welder/Brazer looking to join a dynamic and innovative company? This is your chance to be a part of something truly remarkable. The Welder/Brazer role at this company is a unique opportunity to contribute to the production of world-class aerospace components and make a real difference. What You'll Be Doing as a Welder/Brazer Undertake a variety of welding and brazing operations required in the assembly of parts or sub-assemblies Carry out welding of aluminium, stainless steel, and mild steel to industry-leading standards Set and operate spot welders, and perform deburring, polishing, and cleaning tasks on all welding and brazing work Support the maintenance team with welding work as required Contribute to proof of concept and other development welding activities What We're Looking For Strong engineering background with experience in reading and interpreting engineering drawings Proficient in using measuring equipment, gas cutters, grinders, and Gas Tungsten Arc equipment Certified to BS EN:12797:2000 and AWSD17.1/D17.1M:2010-AMD1 standards Excellent problem-solving and attention to detail Ability to work collaboratively in a team environment Why Join This Company? This company is a leading manufacturer of ejection seats, dedicated to saving lives worldwide. As a Welder/Brazer, you'll have the opportunity to work alongside industry experts, develop new skills, and gain valuable experience in the aerospace industry. The company offers a highly competitive benefits package, including a 9% non-contributory pension scheme, 4x salary life assurance, and a personalised training and development plan. Apply Now If you're ready to take your career to new heights as a Welder/Brazer, we encourage you to apply today. Submit your application and let's discuss how you can become a vital part of this exciting and rewarding opportunity. Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
Bennett and Game Recruitment LTD
Bedford, Bedfordshire
Bennett and Game are currently on the lookout for a skilled Fabrication Technician for one of our longest standing clients based in Bedford who work within the automated solutions of the engineering industry. Our client is looking for an enthusiastic Fabrication Technician with a genuine interest in engineering and manufacturing. The ideal individual should have a flexible approach to working, be trustworthy and confident to work independently with strong attention to detail. Please note - this role is a late shift working pattern (14:00PM to 00:00AM) (40 Hours a week). So if you are not able to do that shift or work 1 weekend a month, please do not apply. Fabrication Technician Job Overview Carry out fabrication preparation processes. Use fabrication tools and grinder tools. Ensuring metal components are prepared, clean and scratch free. Loading, unloading and operating the automated washers. Supporting the welding and fabrication team. Use of pillar tools. Fabrication Technician Job Requirements A background of working in fabrication. Knowledge of fabrication, grinder and pillar tools. Appetite to learn new processes within the sheet metal department. Based within a commutable distance of Bedford. Full UK driving licence would be beneficial. Fabrication Technician Salary & Benefits . Salary - 28,000 to 32,000 - DOE. Working hours: - 14:00PM -00:00AM (40-hour rolling work pattern). Shift pattern - 4 days on, 3 days off, etc. (1 weekend per month) 8% employer pension. 22 days holiday + bank holidays. Regular paid company events, food, drink and socials. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Oct 07, 2025
Full time
Bennett and Game are currently on the lookout for a skilled Fabrication Technician for one of our longest standing clients based in Bedford who work within the automated solutions of the engineering industry. Our client is looking for an enthusiastic Fabrication Technician with a genuine interest in engineering and manufacturing. The ideal individual should have a flexible approach to working, be trustworthy and confident to work independently with strong attention to detail. Please note - this role is a late shift working pattern (14:00PM to 00:00AM) (40 Hours a week). So if you are not able to do that shift or work 1 weekend a month, please do not apply. Fabrication Technician Job Overview Carry out fabrication preparation processes. Use fabrication tools and grinder tools. Ensuring metal components are prepared, clean and scratch free. Loading, unloading and operating the automated washers. Supporting the welding and fabrication team. Use of pillar tools. Fabrication Technician Job Requirements A background of working in fabrication. Knowledge of fabrication, grinder and pillar tools. Appetite to learn new processes within the sheet metal department. Based within a commutable distance of Bedford. Full UK driving licence would be beneficial. Fabrication Technician Salary & Benefits . Salary - 28,000 to 32,000 - DOE. Working hours: - 14:00PM -00:00AM (40-hour rolling work pattern). Shift pattern - 4 days on, 3 days off, etc. (1 weekend per month) 8% employer pension. 22 days holiday + bank holidays. Regular paid company events, food, drink and socials. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Westray Recruitment Consultants Ltd
Newton Aycliffe, County Durham
WHAT IS IN IT FOR YOU Hours: Monday to Friday 8am to 4:30pm Monday to Thursday, 8am to 2:30pm on a Friday Temp to Perm £13.50 per hour Looking for a new role as a welder Are you seeking an organisation that offers long term prospects Then take a look THE BUSINESS Westray Recruitment Group is seeking an experienced Time Served Welder to work for our client in the Newton Aycliffe area. This role enables the successful welder to join a forward-thinking organisation. THE ROLE Measure and mark work pieces using straightedges, rules and callipers Cut and smoothen metal components using plasma cutters / portable grinders Read and interpret blueprints and production drawings in order to lay out a welding project Collaborate with project managers and welding supervisors to ensure smooth work operations Guide and direct the activities of inexperienced/trainee welders Maintain welding safety guidelines and regulations to ensure a risk-free work environment Carry out welding according to set dimensions to meet general test requirements Organise and clean welding equipment on a regular basis Weld materials in flat, horizontal, vertical, and overhead positions Adjust gas gauges to set the flow rate of shield gas Use measuring instruments such as micrometres and callipers to inspect angles, grooves or gap allowances Apply knowledge of metallurgy and geometry in selecting welding equipment and configuration. THE PERSON You will be physically fit, have the ability to lift and handle heavy material Experience working within an engineering environment Able to read engineering drawings Must be a timed served welder Flexible to work shifts and overtime to meet business demands TO APPLY To apply for this position, send your CV to (url removed) or call the team on (phone number removed) (Option 1)
Oct 07, 2025
Seasonal
WHAT IS IN IT FOR YOU Hours: Monday to Friday 8am to 4:30pm Monday to Thursday, 8am to 2:30pm on a Friday Temp to Perm £13.50 per hour Looking for a new role as a welder Are you seeking an organisation that offers long term prospects Then take a look THE BUSINESS Westray Recruitment Group is seeking an experienced Time Served Welder to work for our client in the Newton Aycliffe area. This role enables the successful welder to join a forward-thinking organisation. THE ROLE Measure and mark work pieces using straightedges, rules and callipers Cut and smoothen metal components using plasma cutters / portable grinders Read and interpret blueprints and production drawings in order to lay out a welding project Collaborate with project managers and welding supervisors to ensure smooth work operations Guide and direct the activities of inexperienced/trainee welders Maintain welding safety guidelines and regulations to ensure a risk-free work environment Carry out welding according to set dimensions to meet general test requirements Organise and clean welding equipment on a regular basis Weld materials in flat, horizontal, vertical, and overhead positions Adjust gas gauges to set the flow rate of shield gas Use measuring instruments such as micrometres and callipers to inspect angles, grooves or gap allowances Apply knowledge of metallurgy and geometry in selecting welding equipment and configuration. THE PERSON You will be physically fit, have the ability to lift and handle heavy material Experience working within an engineering environment Able to read engineering drawings Must be a timed served welder Flexible to work shifts and overtime to meet business demands TO APPLY To apply for this position, send your CV to (url removed) or call the team on (phone number removed) (Option 1)
Tool Technician Based in Wotton, Surrey (Own transport is required due to Rural location) Monday - Friday / 8am - 4.30pm The Tool technician is tasked with supporting the production department daily, based in the tool room. Working with other team members cleaning and servicing of Injection moulding tools with timely turnaround to maintain production schedules. The cleaning and servicing of the injection moulding tools requires good attention to detail and quality of workmanship that are vital to this role. What You'll Be Doing The Tooling technician will be servicing and cleaning injection mould tools, stripping them down for cleaning, inspecting for issues and reporting any found, reassembling the tools after servicing, and returning the tools to the production department. On occasion other responsibilities for the repair, maintenance, and calibration of tools, jigs, fixtures, and instruments may be required Daily servicing & cleaning of mould tools in the tool room or in the factory. Carrying out the repairs, modifications and servicing of injection moulding tools and other associated tooling. Document service & repair work by completing electronic records, including photographs of issues documented. At times support production by completing cleans or repairs in the clean room factory. To carry out, cleaning and servicing on other toolroom and production equipment as required from time to time. Assist in equipment repairs and breakdown if required. Maintaining a clean and safe working environment. What You'll Bring You will hold a C&G's, NVQ or Apprenticeship trained Solid experience in mechanical assembly & disassembly and basic wiring. Experience of Manual and CNC machine tools to include all or some of the following: Surface Grinder, CNC, VMC, Milling and Centre Lathe Mechanical Engineering / toolmaker apprenticeship, with experience in injection molding tools although not essential. High precision injection tooling, polishing, and finishing experience is desirable. Hot runner experience and multi-cavity high is also advantageous Be able to read and understand 2D component Drawings, experience with wiring drawings also advantageous Core Computer skills using email, excel and word documents. Work in a small team with good communication & co-operation Ability to work under pressure and keep to deadlines. Ability to adapt to change and maintain a positive attitude and continuous improvements.
Oct 07, 2025
Full time
Tool Technician Based in Wotton, Surrey (Own transport is required due to Rural location) Monday - Friday / 8am - 4.30pm The Tool technician is tasked with supporting the production department daily, based in the tool room. Working with other team members cleaning and servicing of Injection moulding tools with timely turnaround to maintain production schedules. The cleaning and servicing of the injection moulding tools requires good attention to detail and quality of workmanship that are vital to this role. What You'll Be Doing The Tooling technician will be servicing and cleaning injection mould tools, stripping them down for cleaning, inspecting for issues and reporting any found, reassembling the tools after servicing, and returning the tools to the production department. On occasion other responsibilities for the repair, maintenance, and calibration of tools, jigs, fixtures, and instruments may be required Daily servicing & cleaning of mould tools in the tool room or in the factory. Carrying out the repairs, modifications and servicing of injection moulding tools and other associated tooling. Document service & repair work by completing electronic records, including photographs of issues documented. At times support production by completing cleans or repairs in the clean room factory. To carry out, cleaning and servicing on other toolroom and production equipment as required from time to time. Assist in equipment repairs and breakdown if required. Maintaining a clean and safe working environment. What You'll Bring You will hold a C&G's, NVQ or Apprenticeship trained Solid experience in mechanical assembly & disassembly and basic wiring. Experience of Manual and CNC machine tools to include all or some of the following: Surface Grinder, CNC, VMC, Milling and Centre Lathe Mechanical Engineering / toolmaker apprenticeship, with experience in injection molding tools although not essential. High precision injection tooling, polishing, and finishing experience is desirable. Hot runner experience and multi-cavity high is also advantageous Be able to read and understand 2D component Drawings, experience with wiring drawings also advantageous Core Computer skills using email, excel and word documents. Work in a small team with good communication & co-operation Ability to work under pressure and keep to deadlines. Ability to adapt to change and maintain a positive attitude and continuous improvements.
