Our client requires an experienced Pharmacy Technician MMT experience to start as soon as possible. This Hospital is close to mainline station. Contact us now for more information or apply now. Key Skills Required: NHS Hospital experience essential MMT experience Fully Compliant GPhC registered In return we will offer you: Excellent rates of pay Access to exclusive vacancies Support and expert advice from an approachable, dedicated and friendly team Experienced and dedicated compliance consultants Flexible hours to meet your needs, part or full time Recommend a Friend bonus scheme Recommend your friends to The Locum Agency and in return we will pay you £150 per recommendation, once they have worked 150 hours. Please apply now if you would like to be considered for this position.
Nov 01, 2025
Full time
Our client requires an experienced Pharmacy Technician MMT experience to start as soon as possible. This Hospital is close to mainline station. Contact us now for more information or apply now. Key Skills Required: NHS Hospital experience essential MMT experience Fully Compliant GPhC registered In return we will offer you: Excellent rates of pay Access to exclusive vacancies Support and expert advice from an approachable, dedicated and friendly team Experienced and dedicated compliance consultants Flexible hours to meet your needs, part or full time Recommend a Friend bonus scheme Recommend your friends to The Locum Agency and in return we will pay you £150 per recommendation, once they have worked 150 hours. Please apply now if you would like to be considered for this position.
Questech Automotive Recruitment are recruiting on behalf of an Industry leading client for a Light Vehicle Technicians to work at one of our clients sites in Bradford THE ROLE: You will be an apprentice trained, fully qualified Technician that has experience working with a variety of Light Commercial Vehicles. ROLE Preventative maintenance Maintaining relationships with clients 6 weekly inspections Pre M.O.T inspections vehicle diagnostics Skills & Experience Level 3 in Light Vehicle maintenance & repair. Strong customer service skills Good communication skills Good attention to detail Ability to work autonomously Ability to work within given time frames Ability to tackle all aspects of vehicle repair and servicing. Diagnostics skills THE HOURS Working Mon to Fri with starts between 07:00 and 17:00 THE RATE OF PAY: You will earn an hourly rate of up to 19 per hour dependant on experience. If you believe that you are the right candidate for the role, please apply today or contact Matt Staniforth for more information.
Nov 01, 2025
Full time
Questech Automotive Recruitment are recruiting on behalf of an Industry leading client for a Light Vehicle Technicians to work at one of our clients sites in Bradford THE ROLE: You will be an apprentice trained, fully qualified Technician that has experience working with a variety of Light Commercial Vehicles. ROLE Preventative maintenance Maintaining relationships with clients 6 weekly inspections Pre M.O.T inspections vehicle diagnostics Skills & Experience Level 3 in Light Vehicle maintenance & repair. Strong customer service skills Good communication skills Good attention to detail Ability to work autonomously Ability to work within given time frames Ability to tackle all aspects of vehicle repair and servicing. Diagnostics skills THE HOURS Working Mon to Fri with starts between 07:00 and 17:00 THE RATE OF PAY: You will earn an hourly rate of up to 19 per hour dependant on experience. If you believe that you are the right candidate for the role, please apply today or contact Matt Staniforth for more information.
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering the Home Counties region. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Nov 01, 2025
Full time
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering the Home Counties region. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Müller UK & Ireland is wholly owned by Unternehmensgruppe Theo Müller which employs over 31,000 people throughout Europe. In the UK, Müller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from 1,300 farmers in Britain.Müller is ranked within the top 20 in The Grocer's Top 100 list of Britain's Biggest Brands and is picked from shelves millions of times each year. Müller UK & Ireland includes: Müller Milk & Ingredients which aims to be Britain's private label dairy leader and produces branded and private label fresh milk, cream, butter and ingredients products. It boasts a network of dairies and depots servicing customers throughout the country. Müller Yogurt & Desserts which is the UK's leading yogurt manufacturer which aims to create millions more Müller moments for its consumers. It is responsible for major brands like Müller Corner, Müllerlight, Müller Bliss, Müller Rice, FRijj and Müller Kefir Smoothie and produces chilled desserts under licence from Mondelez International. It also supplies the UK private label yogurt market from a dedicated, state of the art yogurt facility. Join Müller as a Tax Assistant - Market Drayton Head Office Müller is a much-loved brand in the UK, known for its delicious dairy products and continued growth. As the 8th most chosen FMCG brand, we're proud to be picked from supermarket shelves over 208 million times a year. We're now looking for a Tax Assistant to join our Tax Team at our Market Drayton Head Office. This is a fantastic opportunity for a recent Graduate-support will be provided to gain your ATT (Association of Tax Technicians) qualification. Main Responsibilities • Prepare foreign VAT returns and reclaims • Support Alcoholic Ingredients Relief claims and reconciliations • Review VAT for new products and competitions • Maintain and monitor tax trackers • Assist with Plastic Packaging Tax returns • Calculate and report environmental taxes and levies • Analyse expense accounts for PAYE Settlement Agreement • Track Short Term Business Visitors • Support Global Mobility and tax return data collection • Assist with IR35 reviews and tracking • Monitor overnight rates audits • Provide ad-hoc support and project assistance • Contribute to Senior Accounting Officer reviews and reporting • Collect data for HMRC queries and group requests • Maintain Tax Department intranet content • Provide general tax administration support • Take meeting notes and run reports/information requests Key Requirements • Strong working knowledge of Word and Excel • Hands-on approach with high attention to detail • Resilient and adaptable to changing deadlines • Excellent communication and diplomacy skills • Team-oriented mindset • Knowledge of VAT returns, basic VAT legislation, and employment tax (desirable) Desirable • 2-3 years in a financial or tax environment (not essential) Benefits • Up to 5% annual bonus • 2x Life Assurance • Health Care Cash Plan • 25 days holiday + bank holidays (rising with service) • Enhanced family and bereavement leave • Pension scheme (matched up to 8%) • Access to Müller Rewards for discounts and development opportunities Apply Now
Nov 01, 2025
Full time
Müller UK & Ireland is wholly owned by Unternehmensgruppe Theo Müller which employs over 31,000 people throughout Europe. In the UK, Müller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from 1,300 farmers in Britain.Müller is ranked within the top 20 in The Grocer's Top 100 list of Britain's Biggest Brands and is picked from shelves millions of times each year. Müller UK & Ireland includes: Müller Milk & Ingredients which aims to be Britain's private label dairy leader and produces branded and private label fresh milk, cream, butter and ingredients products. It boasts a network of dairies and depots servicing customers throughout the country. Müller Yogurt & Desserts which is the UK's leading yogurt manufacturer which aims to create millions more Müller moments for its consumers. It is responsible for major brands like Müller Corner, Müllerlight, Müller Bliss, Müller Rice, FRijj and Müller Kefir Smoothie and produces chilled desserts under licence from Mondelez International. It also supplies the UK private label yogurt market from a dedicated, state of the art yogurt facility. Join Müller as a Tax Assistant - Market Drayton Head Office Müller is a much-loved brand in the UK, known for its delicious dairy products and continued growth. As the 8th most chosen FMCG brand, we're proud to be picked from supermarket shelves over 208 million times a year. We're now looking for a Tax Assistant to join our Tax Team at our Market Drayton Head Office. This is a fantastic opportunity for a recent Graduate-support will be provided to gain your ATT (Association of Tax Technicians) qualification. Main Responsibilities • Prepare foreign VAT returns and reclaims • Support Alcoholic Ingredients Relief claims and reconciliations • Review VAT for new products and competitions • Maintain and monitor tax trackers • Assist with Plastic Packaging Tax returns • Calculate and report environmental taxes and levies • Analyse expense accounts for PAYE Settlement Agreement • Track Short Term Business Visitors • Support Global Mobility and tax return data collection • Assist with IR35 reviews and tracking • Monitor overnight rates audits • Provide ad-hoc support and project assistance • Contribute to Senior Accounting Officer reviews and reporting • Collect data for HMRC queries and group requests • Maintain Tax Department intranet content • Provide general tax administration support • Take meeting notes and run reports/information requests Key Requirements • Strong working knowledge of Word and Excel • Hands-on approach with high attention to detail • Resilient and adaptable to changing deadlines • Excellent communication and diplomacy skills • Team-oriented mindset • Knowledge of VAT returns, basic VAT legislation, and employment tax (desirable) Desirable • 2-3 years in a financial or tax environment (not essential) Benefits • Up to 5% annual bonus • 2x Life Assurance • Health Care Cash Plan • 25 days holiday + bank holidays (rising with service) • Enhanced family and bereavement leave • Pension scheme (matched up to 8%) • Access to Müller Rewards for discounts and development opportunities Apply Now
Job Title: Vehicle Mechanic Company: APEX SERVICE CENTRE Job Description: We are seeking a mechanic to join our team. About Us: We are a small service centre that handles the preparation of cars for car dealerships as well as usual public services. Key Responsibilities: Conduct routine maintenance tasks such as oil and filter services, MOT repairs. Handle more complex repairs including cambelts, gearboxes, and engine changes. Collaborate with the current preparation manager and, when necessary, work alongside an apprentice. Work Environment: Fast-paced with a focus on efficiency. Opportunities for overtime, though it is not mandatory. Access to facilities for private jobs after hours. Qualifications: Experience in vehicle maintenance and repair. Ability to work efficiently in a fast-paced environment. Strong attention to detail and commitment to quality. We offer a supportive work environment with ample opportunities for professional growth. If you are passionate about working with high-end vehicles and thrive in a dynamic setting, we would love to hear from you. Job Type: Full-time Pay: £40,000.00 per year Application question(s): Are you able to change cam belts, gearboxes and engines? Experience: Mechanical knowledge: 3 years (required) Licence/Certification: Driving Licence (required) Work authorisation: United Kingdom (required) Work Location: In person Reference ID: MECHANIC
Nov 01, 2025
Full time
Job Title: Vehicle Mechanic Company: APEX SERVICE CENTRE Job Description: We are seeking a mechanic to join our team. About Us: We are a small service centre that handles the preparation of cars for car dealerships as well as usual public services. Key Responsibilities: Conduct routine maintenance tasks such as oil and filter services, MOT repairs. Handle more complex repairs including cambelts, gearboxes, and engine changes. Collaborate with the current preparation manager and, when necessary, work alongside an apprentice. Work Environment: Fast-paced with a focus on efficiency. Opportunities for overtime, though it is not mandatory. Access to facilities for private jobs after hours. Qualifications: Experience in vehicle maintenance and repair. Ability to work efficiently in a fast-paced environment. Strong attention to detail and commitment to quality. We offer a supportive work environment with ample opportunities for professional growth. If you are passionate about working with high-end vehicles and thrive in a dynamic setting, we would love to hear from you. Job Type: Full-time Pay: £40,000.00 per year Application question(s): Are you able to change cam belts, gearboxes and engines? Experience: Mechanical knowledge: 3 years (required) Licence/Certification: Driving Licence (required) Work authorisation: United Kingdom (required) Work Location: In person Reference ID: MECHANIC
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering the Home Counties region. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Nov 01, 2025
Full time
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering the Home Counties region. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Workshop Controller (Trucks) Mon - Friday Based in the Dungannon area, this is a superb opportunity for a Workshop Controller with experience in either a HGV, Car, Construction Machinery, Forklift, Agricultural Machinery dealership environment. They are a very professional dealership who are one of the leading brands and who have state-of-the-art premises. The only reason that the role has become available is because the existing Workshop Controller is moving into another role at the company. The Role - Workshop Controller Allocate work to Commercial Vehicle Technicians (CVTs) and Passenger Car Technicians (LCV's) based on skill level and job complexity to maximise efficiencies Management of job card write ups through our electronic work in progress portal Monitor progress of repairs and services, ensuring timely completion and compliance with manufacturer standards Communicate with the parts department to ensure timely availability of parts Overseeing and coaching CVT's and Apprentice CVT's Participating in operational meetings, daily yard walks On offer - Workshop Controller Salary £35,000 - £40,000 Death in service Sick pay Pension 30 holidays Subsidised canteen Discounted or free food Cycle to work scheme If you would like to find out more about this Workshop Controller job, then contact James Coulter. C-Tech Recruitment are a recruitment agency with 20 years' experience specialising in the market within Northern Ireland.
Nov 01, 2025
Full time
Workshop Controller (Trucks) Mon - Friday Based in the Dungannon area, this is a superb opportunity for a Workshop Controller with experience in either a HGV, Car, Construction Machinery, Forklift, Agricultural Machinery dealership environment. They are a very professional dealership who are one of the leading brands and who have state-of-the-art premises. The only reason that the role has become available is because the existing Workshop Controller is moving into another role at the company. The Role - Workshop Controller Allocate work to Commercial Vehicle Technicians (CVTs) and Passenger Car Technicians (LCV's) based on skill level and job complexity to maximise efficiencies Management of job card write ups through our electronic work in progress portal Monitor progress of repairs and services, ensuring timely completion and compliance with manufacturer standards Communicate with the parts department to ensure timely availability of parts Overseeing and coaching CVT's and Apprentice CVT's Participating in operational meetings, daily yard walks On offer - Workshop Controller Salary £35,000 - £40,000 Death in service Sick pay Pension 30 holidays Subsidised canteen Discounted or free food Cycle to work scheme If you would like to find out more about this Workshop Controller job, then contact James Coulter. C-Tech Recruitment are a recruitment agency with 20 years' experience specialising in the market within Northern Ireland.
About the role We have an excellent opportunity available for a motivated Service Advisor to join our team at Wakefield Audi As a Sytner Service Advisor, you will provide outstanding customer care and be the vital link between our customers and the workshop. You will inform and consult on vehicle servicing, and keep the customer up to date at every stage whilst answering any questions or queries they may have. You will also liaise with technicians/workshop control about vehicle statuses and ensure that vehicles will be ready on time. You will also have the ability to give the best advice on our products and services to our customers. This is a challenging role where customer care always comes first, you'll take the time to talk to people, build a genuine rapport and identify exactly what our customers want and need. Sytner Service Advisors work a variety of flexible patterns which can typically include weekends to ensure we provide our customers with the highest possible levels of service. About you Don't worry if you do not have previous experience, we want applications from individuals with a willingness to learn and progress. Training is provided through our dedicated in-house Learning & Development team and outstanding manufacturer courses run by Audi to support your career. Ideally, you will have excellent organisational and administrative skills along with good attention to detail. A strong customer service background would be beneficial as you will be delivering high levels of customer satisfaction in a very busy and demanding environment. Working knowledge of Kerridge would be advantageous, but not essential. Why Sytner? Sytner Group are delighted to provide an industry-leading benefits package. We are passionate about continuous improvement and building an environment where everyone feels valued, appreciated and able to reach their full potential. Enhanced Holiday Entitlement 33 days inc. bank holidays Industry-leading Maternity, Paternity and Adoption Pay Career Development Recognition of Long Service every 5 years Discounted Car Schemes High Street Discounts Discounted Gym memberships Cycle to work scheme One day a year paid voluntary / community work At Sytner, our values and the way we behave are important to us. We have a working environment where we value and respect every individual's unique contribution, supporting our colleagues to thrive and achieve their full potential. We are committed to creating an equitable environment and welcome applications from individuals, regardless of age, gender, ethnicity, disability, sexual orientation, gender identity, socio-economic background, religion and/or belief. As part of our commitment to Diversity and Inclusion, you have the right to ask for changes / adjustments to job interviews and the recruitment process. For more information around reasonable adjustments and the recruitment process please click here. Unsure? Read on We represent over 23 of the world's most prestige vehicle brands, across our 140 UK dealerships. We pride ourselves on Developing Talent and Building Careers and our colleagues recently scored Sytner Group an outstanding 89% on our colleague engagement survey.
Nov 01, 2025
Full time
About the role We have an excellent opportunity available for a motivated Service Advisor to join our team at Wakefield Audi As a Sytner Service Advisor, you will provide outstanding customer care and be the vital link between our customers and the workshop. You will inform and consult on vehicle servicing, and keep the customer up to date at every stage whilst answering any questions or queries they may have. You will also liaise with technicians/workshop control about vehicle statuses and ensure that vehicles will be ready on time. You will also have the ability to give the best advice on our products and services to our customers. This is a challenging role where customer care always comes first, you'll take the time to talk to people, build a genuine rapport and identify exactly what our customers want and need. Sytner Service Advisors work a variety of flexible patterns which can typically include weekends to ensure we provide our customers with the highest possible levels of service. About you Don't worry if you do not have previous experience, we want applications from individuals with a willingness to learn and progress. Training is provided through our dedicated in-house Learning & Development team and outstanding manufacturer courses run by Audi to support your career. Ideally, you will have excellent organisational and administrative skills along with good attention to detail. A strong customer service background would be beneficial as you will be delivering high levels of customer satisfaction in a very busy and demanding environment. Working knowledge of Kerridge would be advantageous, but not essential. Why Sytner? Sytner Group are delighted to provide an industry-leading benefits package. We are passionate about continuous improvement and building an environment where everyone feels valued, appreciated and able to reach their full potential. Enhanced Holiday Entitlement 33 days inc. bank holidays Industry-leading Maternity, Paternity and Adoption Pay Career Development Recognition of Long Service every 5 years Discounted Car Schemes High Street Discounts Discounted Gym memberships Cycle to work scheme One day a year paid voluntary / community work At Sytner, our values and the way we behave are important to us. We have a working environment where we value and respect every individual's unique contribution, supporting our colleagues to thrive and achieve their full potential. We are committed to creating an equitable environment and welcome applications from individuals, regardless of age, gender, ethnicity, disability, sexual orientation, gender identity, socio-economic background, religion and/or belief. As part of our commitment to Diversity and Inclusion, you have the right to ask for changes / adjustments to job interviews and the recruitment process. For more information around reasonable adjustments and the recruitment process please click here. Unsure? Read on We represent over 23 of the world's most prestige vehicle brands, across our 140 UK dealerships. We pride ourselves on Developing Talent and Building Careers and our colleagues recently scored Sytner Group an outstanding 89% on our colleague engagement survey.
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering the Home Counties region. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Nov 01, 2025
Full time
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering the Home Counties region. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Accountancy Technician Your new company This rising accountancy firm, based in Belfast, represents a diverse range of clients in a variety of industries. A significant and well-known accounting firm that has built a solid reputation acting for a diverse range of clients of all sizes and industries. Excellent opportunities for advancement are available here. There is a clear path to advancement and a role inside this firm for the suitable professional. Your new role As an Accounts Technician with the firm based in Belfast, you will be responsible for preparing year end accounts, management accounts, VAT, advising clients on cloud/online accounting software, and providing other services to a diverse client base, including OMBs, SMEs, limited companies, sole traders, and partnerships, with a wide range of turnover and industry. As you progress in the role and firm, you will have the ability to grow technically by working with managers on larger project tasks. With full study packages on offer, you will be fully supported in your studies and will grow technically in your career with a prominent accountancy practice. What you'll need to succeed As an Accounts Technician, you may be AAT qualified or studying in the final stages, and/or studying / part qualified ACA or ACCA, and you will have a background in accountancy practice, having gained experience developed within an accountancy practice background over the last two to three years or significantly more. You would have gained experience in creating year-end accounts, management accounts, VAT, and other areas. You should have prior expertise with online/cloud accounting software as well as the ability to advise clients on this. Your experience will have come from working in a small, medium, or large independent accounting firm/Top 50 or Top Tier firm setting. What you'll get in return £25,000 - £34,500 dependent on experience and background, negotiable, plus benefits and study support What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call me on for a confidential chat. If this job isn't quite right for you but you are looking for a new position, please do contact me for a no pressure discussion in regard to your career options. #
Nov 01, 2025
Full time
Accountancy Technician Your new company This rising accountancy firm, based in Belfast, represents a diverse range of clients in a variety of industries. A significant and well-known accounting firm that has built a solid reputation acting for a diverse range of clients of all sizes and industries. Excellent opportunities for advancement are available here. There is a clear path to advancement and a role inside this firm for the suitable professional. Your new role As an Accounts Technician with the firm based in Belfast, you will be responsible for preparing year end accounts, management accounts, VAT, advising clients on cloud/online accounting software, and providing other services to a diverse client base, including OMBs, SMEs, limited companies, sole traders, and partnerships, with a wide range of turnover and industry. As you progress in the role and firm, you will have the ability to grow technically by working with managers on larger project tasks. With full study packages on offer, you will be fully supported in your studies and will grow technically in your career with a prominent accountancy practice. What you'll need to succeed As an Accounts Technician, you may be AAT qualified or studying in the final stages, and/or studying / part qualified ACA or ACCA, and you will have a background in accountancy practice, having gained experience developed within an accountancy practice background over the last two to three years or significantly more. You would have gained experience in creating year-end accounts, management accounts, VAT, and other areas. You should have prior expertise with online/cloud accounting software as well as the ability to advise clients on this. Your experience will have come from working in a small, medium, or large independent accounting firm/Top 50 or Top Tier firm setting. What you'll get in return £25,000 - £34,500 dependent on experience and background, negotiable, plus benefits and study support What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call me on for a confidential chat. If this job isn't quite right for you but you are looking for a new position, please do contact me for a no pressure discussion in regard to your career options. #
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering London and surrounding areas. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Nov 01, 2025
Full time
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering London and surrounding areas. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Before making an application, please browse all graduate opportunities available as we will only accept one application per candidate. Once you have made an application you will not be able to make changes to your selection or make a new application. The exception is if we open new vacancies in the new year. To avoid missing out on your preferred opportunity, we also recommend that you apply as soon as possible as we will close when the position has been filled. Turn your ambition into action-apply now and shape your future with us. Job Description Are you ready to launch your career in a place where your ideas matter, your growth is championed, and your work truly makes a difference? Join us as a Graduate Electrical Engineer and help us design, innovate, and deliver solutions that power communities, advance technology, and create a more sustainable world. Innovate & Create : Collaborate with experienced engineers to design, develop, and implement cutting-edge electrical systems and solutions across diverse projects. Learn & Grow : Benefit from structured training, mentorship, and clear pathways for professional development-including support towards chartership and specialist skills. Make an Impact : Contribute to projects that drive positive change, from renewable energy and smart infrastructure to critical public services. As part of your application, we will ask you to select your preferred opportunity based on the sector and location. Some of our opportunities will require you to be eligible to achieve security clearance, this is shown in the selection choices. Security clearance is dictated by the types of projects we work on and normally requires you to be a UK British national or have lived in the UK for five years or more. Below you'll find more information on what work you could do within each area Aviation - Manchester You will support our team of Electrical engineers in their development of Aeronautical Ground Lighting (AGL) and High Mast Lighting (HML) designs for airports in the UK and around the world. You'll prepare electrical designs for runways, taxiways, aircraft aprons, helipads and service roads and also work on electrical designs for Electric Ground Servicing Equipment (GSE) and Electric Vertical Take-off and Landing (eVTOL) charging infrastructure. In this team you will assist in the production of Civil 3D Design of electrical works and infrastructure and generate 3D electrical infrastructure models for airfield projects. Tunnels - Croydon, London Electrical graduates within the Tunnel Systems Team can expect to be designing electrical systems for rail and road tunnels, and metro stations, from concept through to detailed design stages. They will also perform electrical calculations using specialist design software, produce 3D models and drawings using BIM / CAD software, and coordinate with architects and engineers from a variety of different disciplines. They will develop their skills and knowledge through hands on experience and formal training, taking an active role in the managing of the team, group, and division, seeking to exploit new technology and sustainable systems to support our clients. Highways - Norwich, Southampton (Need to be eligible for Security Clearance) Actively involved with preparation of reports, feasibility studies, designs, drawings, specifications, and contract documents, the work will include, liaison with engineers/technicians from other disciplines, working with other lighting design team members to carry out site surveys/inspections, assist in the preparation of estimates, carrying out lighting & electrical designs for projects in accordance with relevant standards and codes of practice, supporting in the production of Environmental Lighting Impact Assessments reports and Economic Assessments reports and Business Cases, assisting with night time lighting assessments, as well as liaising with clients, electricity suppliers, contractors, professional organisations, sub-consultants, and other design teams. Tech and Systems - Birmingham, Bristol, Glasgow, Newcastle, Manchester (Need to be eligible for Security Clearance) Our Technology Team helps our clients deliver high-quality transport technology solutions across local roads, the highway network and public transport. We provide services from feasibility studies through detailed design to post installation analysis for Intelligent Transport Systems (ITS). We're looking for bright, enthusiastic and curious graduates with design and engineering skills across the entire ITS spectrum to develop and implement solutions for local, national and international projects. Projects range from high profile smart motorways schemes and autonomous vehicles through automatic fare collection systems to local equipment installation, such as variable message signs, CCTV and vehicle detectors. Rolling Stock - Altrincham, Birmingham, Derby, London, Manchester Graduates within the Rolling Stock team would typically combine working for clients including Train and Tram Operators, Leasing Companies, and government organisations. Opportunities also arise for working both remotely and in country for overseas customers in North America and Australia. Typical activities could include; inspection of trains, reverse engineering of components; producing CAD drawings and electrical schematics for vehicle modifications; analysis of train failure; review of passenger accidents / incidents; review of new train technical design; support on day to day fault finding and service related problems; simulation of train journey times and energy consumption analysis. The majority of work is undertaken as part of a wider multidisciplined Rolling Stock Team composed of engineers of different skill levels and experiences, team working is the normal practice with Graduate Engineers and Junior Engineers being supported by more senior engineers. Traction Power (Masters Essential) - Altrincham, Croydon, Manchester As a new graduate in the Traction Power and EMC team, you will be involved from day 1 in exciting electrification projects across the globe. Whether it is simulation work with a wide range of software tools, designing a substation, or going on site for surveys, you will do exciting work, alongside some of the most senior experts in the field. Ranging from development schemes like East West Rail, to upgrades in London Underground and Transport for Greater Manchester, the projects you will be involved are having a big impact on everyday lives, and you get to be part of it. The role will also involve engagement with other disciplines within Mott MacDonald, providing a rounded engineering background for your subsequent development, making the Traction Power and EMC team a fantastic place to start your career. Why You'll Thrive Here: We're proud of our award-winning reputation and the trust our clients place in us. But what truly sets us apart is our culture - one that celebrates collaboration, values diversity, and prioritises wellbeing. Here's what you can expect: Growth & Development : From mentorship to technical training, we invest in your personal and professional journey. Inclusive Culture : We welcome diverse perspectives and foster an environment where everyone feels seen, heard, and valued. Team Spirit : You'll be part of a supportive, caring team that works together to solve complex challenges and celebrate shared successes. Purpose & Impact : Your work will contribute to safer hospitals, transport hubs, military installations, and more - projects that matter to society. Integrity & Trust : We uphold the highest standards of ethics and transparency in everything we do. Candidate Specification At Mott MacDonald, we're looking for curious, motivated graduates who want to make a real difference. Join our purpose-driven teams where your ideas matter, your growth is supported, and your work enhances the world we live in. To be eligible for this opportunity, you will have less than 12 months' relevant experience (excluding placements) and have a minimum of a bachelor's degree (obtained no earlier than 2024) or expected to achieve one, in one of the following degree disciplines: Electrical engineering Electronic engineering Rolling stock engineering also accepts degrees in automotive, aerospace and systems engineering. In your application, you should aim to demonstrate your genuine interest in both the opportunity and in joining Mott MacDonald. You can do this by highlighting any relevant experience or interests -such as modules you've studied, previous work experience, or any research you've undertaken about our company, values, and projects. We personally review every completed application we receive as our selection process is entirely human led, we do not use AI tools and kindly expect you not to either. We want you to answer each application question with authenticity so we can get to know the real you. Joining us as graduate is your opportunity to shape your own story. We are looking for graduates with the following strengths: Proactively takes initiative to complete tasks efficiently and independently. Communicates effectively and clearly with clients and colleagues. Delivers high quality written work with strong attention to detail and clarity. . click apply for full job details
Nov 01, 2025
Full time
Before making an application, please browse all graduate opportunities available as we will only accept one application per candidate. Once you have made an application you will not be able to make changes to your selection or make a new application. The exception is if we open new vacancies in the new year. To avoid missing out on your preferred opportunity, we also recommend that you apply as soon as possible as we will close when the position has been filled. Turn your ambition into action-apply now and shape your future with us. Job Description Are you ready to launch your career in a place where your ideas matter, your growth is championed, and your work truly makes a difference? Join us as a Graduate Electrical Engineer and help us design, innovate, and deliver solutions that power communities, advance technology, and create a more sustainable world. Innovate & Create : Collaborate with experienced engineers to design, develop, and implement cutting-edge electrical systems and solutions across diverse projects. Learn & Grow : Benefit from structured training, mentorship, and clear pathways for professional development-including support towards chartership and specialist skills. Make an Impact : Contribute to projects that drive positive change, from renewable energy and smart infrastructure to critical public services. As part of your application, we will ask you to select your preferred opportunity based on the sector and location. Some of our opportunities will require you to be eligible to achieve security clearance, this is shown in the selection choices. Security clearance is dictated by the types of projects we work on and normally requires you to be a UK British national or have lived in the UK for five years or more. Below you'll find more information on what work you could do within each area Aviation - Manchester You will support our team of Electrical engineers in their development of Aeronautical Ground Lighting (AGL) and High Mast Lighting (HML) designs for airports in the UK and around the world. You'll prepare electrical designs for runways, taxiways, aircraft aprons, helipads and service roads and also work on electrical designs for Electric Ground Servicing Equipment (GSE) and Electric Vertical Take-off and Landing (eVTOL) charging infrastructure. In this team you will assist in the production of Civil 3D Design of electrical works and infrastructure and generate 3D electrical infrastructure models for airfield projects. Tunnels - Croydon, London Electrical graduates within the Tunnel Systems Team can expect to be designing electrical systems for rail and road tunnels, and metro stations, from concept through to detailed design stages. They will also perform electrical calculations using specialist design software, produce 3D models and drawings using BIM / CAD software, and coordinate with architects and engineers from a variety of different disciplines. They will develop their skills and knowledge through hands on experience and formal training, taking an active role in the managing of the team, group, and division, seeking to exploit new technology and sustainable systems to support our clients. Highways - Norwich, Southampton (Need to be eligible for Security Clearance) Actively involved with preparation of reports, feasibility studies, designs, drawings, specifications, and contract documents, the work will include, liaison with engineers/technicians from other disciplines, working with other lighting design team members to carry out site surveys/inspections, assist in the preparation of estimates, carrying out lighting & electrical designs for projects in accordance with relevant standards and codes of practice, supporting in the production of Environmental Lighting Impact Assessments reports and Economic Assessments reports and Business Cases, assisting with night time lighting assessments, as well as liaising with clients, electricity suppliers, contractors, professional organisations, sub-consultants, and other design teams. Tech and Systems - Birmingham, Bristol, Glasgow, Newcastle, Manchester (Need to be eligible for Security Clearance) Our Technology Team helps our clients deliver high-quality transport technology solutions across local roads, the highway network and public transport. We provide services from feasibility studies through detailed design to post installation analysis for Intelligent Transport Systems (ITS). We're looking for bright, enthusiastic and curious graduates with design and engineering skills across the entire ITS spectrum to develop and implement solutions for local, national and international projects. Projects range from high profile smart motorways schemes and autonomous vehicles through automatic fare collection systems to local equipment installation, such as variable message signs, CCTV and vehicle detectors. Rolling Stock - Altrincham, Birmingham, Derby, London, Manchester Graduates within the Rolling Stock team would typically combine working for clients including Train and Tram Operators, Leasing Companies, and government organisations. Opportunities also arise for working both remotely and in country for overseas customers in North America and Australia. Typical activities could include; inspection of trains, reverse engineering of components; producing CAD drawings and electrical schematics for vehicle modifications; analysis of train failure; review of passenger accidents / incidents; review of new train technical design; support on day to day fault finding and service related problems; simulation of train journey times and energy consumption analysis. The majority of work is undertaken as part of a wider multidisciplined Rolling Stock Team composed of engineers of different skill levels and experiences, team working is the normal practice with Graduate Engineers and Junior Engineers being supported by more senior engineers. Traction Power (Masters Essential) - Altrincham, Croydon, Manchester As a new graduate in the Traction Power and EMC team, you will be involved from day 1 in exciting electrification projects across the globe. Whether it is simulation work with a wide range of software tools, designing a substation, or going on site for surveys, you will do exciting work, alongside some of the most senior experts in the field. Ranging from development schemes like East West Rail, to upgrades in London Underground and Transport for Greater Manchester, the projects you will be involved are having a big impact on everyday lives, and you get to be part of it. The role will also involve engagement with other disciplines within Mott MacDonald, providing a rounded engineering background for your subsequent development, making the Traction Power and EMC team a fantastic place to start your career. Why You'll Thrive Here: We're proud of our award-winning reputation and the trust our clients place in us. But what truly sets us apart is our culture - one that celebrates collaboration, values diversity, and prioritises wellbeing. Here's what you can expect: Growth & Development : From mentorship to technical training, we invest in your personal and professional journey. Inclusive Culture : We welcome diverse perspectives and foster an environment where everyone feels seen, heard, and valued. Team Spirit : You'll be part of a supportive, caring team that works together to solve complex challenges and celebrate shared successes. Purpose & Impact : Your work will contribute to safer hospitals, transport hubs, military installations, and more - projects that matter to society. Integrity & Trust : We uphold the highest standards of ethics and transparency in everything we do. Candidate Specification At Mott MacDonald, we're looking for curious, motivated graduates who want to make a real difference. Join our purpose-driven teams where your ideas matter, your growth is supported, and your work enhances the world we live in. To be eligible for this opportunity, you will have less than 12 months' relevant experience (excluding placements) and have a minimum of a bachelor's degree (obtained no earlier than 2024) or expected to achieve one, in one of the following degree disciplines: Electrical engineering Electronic engineering Rolling stock engineering also accepts degrees in automotive, aerospace and systems engineering. In your application, you should aim to demonstrate your genuine interest in both the opportunity and in joining Mott MacDonald. You can do this by highlighting any relevant experience or interests -such as modules you've studied, previous work experience, or any research you've undertaken about our company, values, and projects. We personally review every completed application we receive as our selection process is entirely human led, we do not use AI tools and kindly expect you not to either. We want you to answer each application question with authenticity so we can get to know the real you. Joining us as graduate is your opportunity to shape your own story. We are looking for graduates with the following strengths: Proactively takes initiative to complete tasks efficiently and independently. Communicates effectively and clearly with clients and colleagues. Delivers high quality written work with strong attention to detail and clarity. . click apply for full job details
Johnson Controls is a global diversified technology and industrial leader serving customers in over 150 countries. Our Industrial Refrigeration (IREF) division delivers project solutions, maintenance & service solutions that support our customers manufacturing, cold storage and R&D testing requirements. We are the OEM for SABROE, Frick Compressors & York products with trained engineers located nati click apply for full job details
Nov 01, 2025
Full time
Johnson Controls is a global diversified technology and industrial leader serving customers in over 150 countries. Our Industrial Refrigeration (IREF) division delivers project solutions, maintenance & service solutions that support our customers manufacturing, cold storage and R&D testing requirements. We are the OEM for SABROE, Frick Compressors & York products with trained engineers located nati click apply for full job details
Field Based Electrician (Training into Controls) Field Based - Covering York, Malton, Scarborough, Hull & Surrounding Areas 38,000 - 45,000 + Bonus + Pension (18%) + 4 day week + Van (Door 2 Door) + Overtime (1.5x / 2x) + Training Program + Progression + Great Benefits! Are you a Time Served Electrician from an industrial background looking to join a UK leading organisation offering a field based role with brilliant training, development and progression into a specialist PLC / HMI / SCADA role? EX-FORCES ENCOURGAED TO APPLY! This is a fantastic opportunity to join a market leader offering a full training plan into a Project Engineering role, with great company benefits and a good work life balance. The company themselves are leaders in the supply of industrial assets across the UK. Due to their continuous quality improvement plans, they require an Electrician to maintain and improve their customers' assets throughout Yorkshire. The role involves maintaining, repairing and commissioning the Instrumentation Controls and Telemetry systems in and around the Yorkshire area. The role comes complete with on-going training, progression, van, bonus, overtime opportunities and attractive pension scheme. The ideal candidate will be a time served electrician from an industrial background, wanting training and development into PLC's. EX-FORCES ENCOURAGED TO APPLY Here is an excellent opportunity for an Electrician looking for a field based position with great training & development opportunities with a company who will truly invest in their future. The Role: Instrument, Controls, Automation Technician Field Based - Covering Local Area CALL OUT 1/8 The Person: Time Served Electrician Experience fault finding on PLC's (Preferable) Wants a field based position Ex-Forces encouraged to apply To apply for this role or to be considered for further roles, please click "Apply Now" or contact Troy Earl at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Nov 01, 2025
Full time
Field Based Electrician (Training into Controls) Field Based - Covering York, Malton, Scarborough, Hull & Surrounding Areas 38,000 - 45,000 + Bonus + Pension (18%) + 4 day week + Van (Door 2 Door) + Overtime (1.5x / 2x) + Training Program + Progression + Great Benefits! Are you a Time Served Electrician from an industrial background looking to join a UK leading organisation offering a field based role with brilliant training, development and progression into a specialist PLC / HMI / SCADA role? EX-FORCES ENCOURGAED TO APPLY! This is a fantastic opportunity to join a market leader offering a full training plan into a Project Engineering role, with great company benefits and a good work life balance. The company themselves are leaders in the supply of industrial assets across the UK. Due to their continuous quality improvement plans, they require an Electrician to maintain and improve their customers' assets throughout Yorkshire. The role involves maintaining, repairing and commissioning the Instrumentation Controls and Telemetry systems in and around the Yorkshire area. The role comes complete with on-going training, progression, van, bonus, overtime opportunities and attractive pension scheme. The ideal candidate will be a time served electrician from an industrial background, wanting training and development into PLC's. EX-FORCES ENCOURAGED TO APPLY Here is an excellent opportunity for an Electrician looking for a field based position with great training & development opportunities with a company who will truly invest in their future. The Role: Instrument, Controls, Automation Technician Field Based - Covering Local Area CALL OUT 1/8 The Person: Time Served Electrician Experience fault finding on PLC's (Preferable) Wants a field based position Ex-Forces encouraged to apply To apply for this role or to be considered for further roles, please click "Apply Now" or contact Troy Earl at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Repair Centre Technician Role location : Cambridge, UK At Endomag, a Hologic company, were redefining cancer treatment and empowering clinicians worldwide with innovative medical solutions. By leveraging our magnetic-based technologies, including the Sentimag, Magtrace lymphatic tracer, and Magseed marker, we enable physicians to accurately stage breast cancer and perform precise tissue localisatio click apply for full job details
Nov 01, 2025
Full time
Repair Centre Technician Role location : Cambridge, UK At Endomag, a Hologic company, were redefining cancer treatment and empowering clinicians worldwide with innovative medical solutions. By leveraging our magnetic-based technologies, including the Sentimag, Magtrace lymphatic tracer, and Magseed marker, we enable physicians to accurately stage breast cancer and perform precise tissue localisatio click apply for full job details
Who we are in a nutshell. At BES Group, we pride ourselves on being the leading end to end risk management solutions provider in the UK and Ireland. That means it's our job to help keep our customers assets' legally compliant, operational and, above all else, safe. We're able to achieve this with a team of only the very best, most talented people. With our specialist asset reliability services, we help prevent machinery failures and, as a result, unscheduled (and, very often, costly) downtime for our customers. We're all about operational efficiency and our team of highly skilled engineers not only use, but also develop and produce, some of the most sophisticated technology to help keep our customer's assets doing what they need to, without any unexpected surprises along the way. What will you be doing? As a Oil Laboratory Technician for BES Asset Reliability, you will be supporting with laboratory operations by preparing samples, conducting routine tests, maintaining equipment, and ensuring a clean and safe working environment. The Laboratory Technician plays a vital role in delivering accurate and timely results that support quality assurance and operational efficiency. You will: Prepare oil samples for analysis. Perform routine laboratory testing following standard operating procedures. Maintain, calibrate and troubleshoot laboratory equipment. Record test results accurately. Assemble kits for customers and dispatch in a timely manner. Assist in maintaining stock levels of consumables and laboratory supplies. Ensure cleanliness and organisation of the workspace. Follow health and safety protocols at all times. Support the analysts and manager with more complex testing as required. Perform any other tasks associated with the smooth operation of the business as required. As part of our team, you will get: A starting salary of £25,000 Company Pension Scheme Annual salary review 23 days annual leave, increasing to 25 days after 2 years' service plus 8 bank holidays only keep relevant holiday info An extra day's holiday to take on Christmas Eve each year Access to our buy and sell holiday scheme Opportunity for flexible working Electric Vehicle salary sacrifice scheme Discounts and savings via our employee benefits portal Health and wellbeing support via our Employee Assistance Programme Company wide volunteering scheme To join our team, you will need: Experience working a laboratory and a good understanding of lab safety and good laboratory practice. Strong attention to detail Able to multi-task Able to work under own initiative Able to proficiently use Microsoft Word, Excel, PowerPoint, Outlook A clear communicator with a can-do attitude who has the drive, commitment and passion to continuously improve the quality of service We want you to be you! Our focus on diversity, equality and inclusion is here to stay. Our team is made up of some of the most skilled and talented people and that's what matters to us. At BES Group, we want our people to know that they can be their true authentic selves at work, it really is that simple. What's more, we are delighted to have pledged our commitment to the military community by signing the Armed Forces Covenant. Go for it! Research suggests that some people tend to only apply for roles if they meet all requirements. If you don't meet every point above, but still feel like you could really help make a difference in this role, please apply, you might be exactly what we're looking for. To apply for this role, simply click "Apply". We ask for some basic contact information and a CV or your LinkedIn profile, it's that easy! Please note, successful candidates will be required to complete the relevant background checks as part of the recruitment process. BES Group, where our people and our customers come before everything else.
Nov 01, 2025
Full time
Who we are in a nutshell. At BES Group, we pride ourselves on being the leading end to end risk management solutions provider in the UK and Ireland. That means it's our job to help keep our customers assets' legally compliant, operational and, above all else, safe. We're able to achieve this with a team of only the very best, most talented people. With our specialist asset reliability services, we help prevent machinery failures and, as a result, unscheduled (and, very often, costly) downtime for our customers. We're all about operational efficiency and our team of highly skilled engineers not only use, but also develop and produce, some of the most sophisticated technology to help keep our customer's assets doing what they need to, without any unexpected surprises along the way. What will you be doing? As a Oil Laboratory Technician for BES Asset Reliability, you will be supporting with laboratory operations by preparing samples, conducting routine tests, maintaining equipment, and ensuring a clean and safe working environment. The Laboratory Technician plays a vital role in delivering accurate and timely results that support quality assurance and operational efficiency. You will: Prepare oil samples for analysis. Perform routine laboratory testing following standard operating procedures. Maintain, calibrate and troubleshoot laboratory equipment. Record test results accurately. Assemble kits for customers and dispatch in a timely manner. Assist in maintaining stock levels of consumables and laboratory supplies. Ensure cleanliness and organisation of the workspace. Follow health and safety protocols at all times. Support the analysts and manager with more complex testing as required. Perform any other tasks associated with the smooth operation of the business as required. As part of our team, you will get: A starting salary of £25,000 Company Pension Scheme Annual salary review 23 days annual leave, increasing to 25 days after 2 years' service plus 8 bank holidays only keep relevant holiday info An extra day's holiday to take on Christmas Eve each year Access to our buy and sell holiday scheme Opportunity for flexible working Electric Vehicle salary sacrifice scheme Discounts and savings via our employee benefits portal Health and wellbeing support via our Employee Assistance Programme Company wide volunteering scheme To join our team, you will need: Experience working a laboratory and a good understanding of lab safety and good laboratory practice. Strong attention to detail Able to multi-task Able to work under own initiative Able to proficiently use Microsoft Word, Excel, PowerPoint, Outlook A clear communicator with a can-do attitude who has the drive, commitment and passion to continuously improve the quality of service We want you to be you! Our focus on diversity, equality and inclusion is here to stay. Our team is made up of some of the most skilled and talented people and that's what matters to us. At BES Group, we want our people to know that they can be their true authentic selves at work, it really is that simple. What's more, we are delighted to have pledged our commitment to the military community by signing the Armed Forces Covenant. Go for it! Research suggests that some people tend to only apply for roles if they meet all requirements. If you don't meet every point above, but still feel like you could really help make a difference in this role, please apply, you might be exactly what we're looking for. To apply for this role, simply click "Apply". We ask for some basic contact information and a CV or your LinkedIn profile, it's that easy! Please note, successful candidates will be required to complete the relevant background checks as part of the recruitment process. BES Group, where our people and our customers come before everything else.
We are looking for medical experts to join our team to train AI models. You will measure the progress of these AI chatbots, evaluate their logic, and solve problems to improve the quality of each model. In this role you will need to be an expert in healthcare. We are interested in a wide range of expertise, so relevant backgrounds include: Physicians & Advanced Practice Clinicians: Physicians of all specialties (e.g., Internists, Cardiologists, Oncologists), Physician Assistants, Nurse Practitioners, Certified Nurse-Midwives, Certified Registered Nurse Anesthetists, Clinical Nurse Specialists, Registered Nurses. Therapists: Physical Therapists, Occupational Therapists, Speech-Language Pathologists, Respiratory Therapists, Athletic Trainers, Massage/Recreational Therapists. Diagnostic & Laboratory Professionals: Radiologic Technologists, Sonographers, MRI & Nuclear Medicine Technologists, Medical Laboratory Scientists, Phlebotomists, Histology & Genetics Technicians. Public Health & Specialized Roles: Dietitians/Nutritionists, Genetic Counselors, Epidemiologists, Public Health Nurses. Benefits: This is a full-time or part-time REMOTE position You'll be able to choose which projects you want to work on You can work on your own schedule Projects are paid hourly from $50 to $60 USD per hour, with bonuses on high-quality and high-volume work Responsibilities: Give AI chatbots diverse and complex healthcare related problems and evaluate their outputs Evaluate the quality produced by AI models for correctness and performance Ensure the medical accuracy of model performance Qualifications: Fluency in English (native or bilingual level) A current or in progress medical degree Note: Payment is made via PayPal. We will never ask for any money from you. PayPal will handle any currency conversions from USD. Job Types: Full-time, Part-time Pay: £37.36-£44.84 per hour Work Location: Remote
Nov 01, 2025
Full time
We are looking for medical experts to join our team to train AI models. You will measure the progress of these AI chatbots, evaluate their logic, and solve problems to improve the quality of each model. In this role you will need to be an expert in healthcare. We are interested in a wide range of expertise, so relevant backgrounds include: Physicians & Advanced Practice Clinicians: Physicians of all specialties (e.g., Internists, Cardiologists, Oncologists), Physician Assistants, Nurse Practitioners, Certified Nurse-Midwives, Certified Registered Nurse Anesthetists, Clinical Nurse Specialists, Registered Nurses. Therapists: Physical Therapists, Occupational Therapists, Speech-Language Pathologists, Respiratory Therapists, Athletic Trainers, Massage/Recreational Therapists. Diagnostic & Laboratory Professionals: Radiologic Technologists, Sonographers, MRI & Nuclear Medicine Technologists, Medical Laboratory Scientists, Phlebotomists, Histology & Genetics Technicians. Public Health & Specialized Roles: Dietitians/Nutritionists, Genetic Counselors, Epidemiologists, Public Health Nurses. Benefits: This is a full-time or part-time REMOTE position You'll be able to choose which projects you want to work on You can work on your own schedule Projects are paid hourly from $50 to $60 USD per hour, with bonuses on high-quality and high-volume work Responsibilities: Give AI chatbots diverse and complex healthcare related problems and evaluate their outputs Evaluate the quality produced by AI models for correctness and performance Ensure the medical accuracy of model performance Qualifications: Fluency in English (native or bilingual level) A current or in progress medical degree Note: Payment is made via PayPal. We will never ask for any money from you. PayPal will handle any currency conversions from USD. Job Types: Full-time, Part-time Pay: £37.36-£44.84 per hour Work Location: Remote
About Us: At Carrier, we are the world leader in healthy, safe, sustainable, and intelligent building and cold chain solutions, with our customers at the heart of everything we do. SLD Pumps & Power, a Carrier company, is one of the UK's leading suppliers of pumps and generator rental equipment. About the role: We are currently recruiting an experienced Service Engineer/Service Technician to join our team at our depot in Walsall. This role is both a depot and field-based role covering operations across the West Midlands. This is an excellent opportunity for a mechanically skilled engineer with diesel engine experience looking to develop their career. What you'll be doing: Service, maintain, and repair pumps, generators, and diesel-powered equipment in both depot and field-based environments. Prepare and inspect equipment at the depot to ensure it is fully operational before deployment. Carry out major overhauls and refurbishments of end-of-life equipment. Diagnose faults and perform repairs to minimise equipment downtime. Collaborate effectively with the service team, hire controller, and foreman to ensure smooth operations. Ensure compliance with Health & Safety regulations and company policies at all times. Maintain a clean and organised working environment, ensuring all equipment meets safety and quality standards. You'll have: Mechanical experience, with working with plant equipment, pumps, generators, and diesel engines. Good working knowledge of EHSQ Relevant qualifications such as NVQ Level 3, an M&E related apprenticeship or equivalent. Full UK Driving licence Our benefits Competitive salary package (Negotiable DOE) Enhanced payments through overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Nov 01, 2025
Full time
About Us: At Carrier, we are the world leader in healthy, safe, sustainable, and intelligent building and cold chain solutions, with our customers at the heart of everything we do. SLD Pumps & Power, a Carrier company, is one of the UK's leading suppliers of pumps and generator rental equipment. About the role: We are currently recruiting an experienced Service Engineer/Service Technician to join our team at our depot in Walsall. This role is both a depot and field-based role covering operations across the West Midlands. This is an excellent opportunity for a mechanically skilled engineer with diesel engine experience looking to develop their career. What you'll be doing: Service, maintain, and repair pumps, generators, and diesel-powered equipment in both depot and field-based environments. Prepare and inspect equipment at the depot to ensure it is fully operational before deployment. Carry out major overhauls and refurbishments of end-of-life equipment. Diagnose faults and perform repairs to minimise equipment downtime. Collaborate effectively with the service team, hire controller, and foreman to ensure smooth operations. Ensure compliance with Health & Safety regulations and company policies at all times. Maintain a clean and organised working environment, ensuring all equipment meets safety and quality standards. You'll have: Mechanical experience, with working with plant equipment, pumps, generators, and diesel engines. Good working knowledge of EHSQ Relevant qualifications such as NVQ Level 3, an M&E related apprenticeship or equivalent. Full UK Driving licence Our benefits Competitive salary package (Negotiable DOE) Enhanced payments through overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Temporary IT Technician (1st Line Support) Enhanced DBS Required Location: Primary School, City of London Contract: Temporary Hourly rate: £20.66ph paye Working Hours 08.00-16.00/ 08.30 -16.30 Start date: Asap - December 2025 (with a potential extension) Are you an experienced IT Technician seeking a rewarding temporary opportunity in the heart of the City of London? Join a vibrant primary school where your skills will directly support staff and pupils in a dynamic learning environment. This role offers £20 per hour and the chance to make a meaningful impact.As one of three key points of contact for IT-related support calls and service desk tickets, you'll provide both first and second-line technical support. You'll manage mobile technology, hardware, and software across the school, prioritising and escalating issues to the IT Systems Manager when needed. You'll also collaborate with teaching staff to ensure seamless access to digital learning resources and contribute to both short-term and long-term IT projects. We're looking for someone who brings: A solid understanding of Office 365 Experience with Azure Active Directory (advantageous) A passion for technology and innovation Strong customer service skills A proactive attitude toward learning and development Ready to make a difference in a school community? Apply now to become our Temporary IT Technician (1st Line Support) and help shape the digital experience for staff and pupils alike.Reply with your most recent cv and availability to talk through the job description.
Nov 01, 2025
Seasonal
Temporary IT Technician (1st Line Support) Enhanced DBS Required Location: Primary School, City of London Contract: Temporary Hourly rate: £20.66ph paye Working Hours 08.00-16.00/ 08.30 -16.30 Start date: Asap - December 2025 (with a potential extension) Are you an experienced IT Technician seeking a rewarding temporary opportunity in the heart of the City of London? Join a vibrant primary school where your skills will directly support staff and pupils in a dynamic learning environment. This role offers £20 per hour and the chance to make a meaningful impact.As one of three key points of contact for IT-related support calls and service desk tickets, you'll provide both first and second-line technical support. You'll manage mobile technology, hardware, and software across the school, prioritising and escalating issues to the IT Systems Manager when needed. You'll also collaborate with teaching staff to ensure seamless access to digital learning resources and contribute to both short-term and long-term IT projects. We're looking for someone who brings: A solid understanding of Office 365 Experience with Azure Active Directory (advantageous) A passion for technology and innovation Strong customer service skills A proactive attitude toward learning and development Ready to make a difference in a school community? Apply now to become our Temporary IT Technician (1st Line Support) and help shape the digital experience for staff and pupils alike.Reply with your most recent cv and availability to talk through the job description.
IT Support Technician Join OSCA Technology as an IT Support Technician and play a key role in keeping our cutting-edge diagnostic systems running smoothly. You ll support both our technicians and customers, troubleshooting issues, managing IT tools, and helping systems stay connected all while developing your IT skills in a fast-moving tech environment. Location: Nottingham- NG15 0EB Salary: £28,000-£30,000 per annum circa Type: Full-time, Permanent About OSCA Technology We combine digital innovation with automotive expertise to create advanced diagnostic tools used worldwide. Based in Nottingham , our team is passionate about making vehicle diagnostics smarter, faster, and more connected. What You ll Be Doing Setting up new starters with system and hardware access (e.g. Freshdesk, OSCA tools ). Purchasing tool tickets and subscriptions, with support from senior team members . Troubleshooting issues with diagnostic tools and vehicle connections . Managing updates and maintenance for diagnostic tools and local IT infrastructure . Testing and investigating OSCA tools returned by customers. Handling support calls from customers with connection or configuration issues . Assisting with onboarding new partners and completing related admin tasks. Working with senior IT staff on data retrieval, manipulation, and presentation . Supporting technicians in resolving connectivity and tool-related challenges. Liaising with manufacturers for technical or login support when required. What We re Looking For Interest in IT and automotive diagnostics . Strong problem-solving skills and attention to detail . Collaborative, proactive approach with excellent communication. Eagerness to learn and grow in a fast-paced tech environment. Benefits & Development Increased holiday allowance with year of service. Death in service policy. Sick Pay. Salary Extras . Free on-site parking . Salary extras instant discounts. Employee Assistance Programme (EAP). Opportunities to develop technical expertise in automotive diagnostics . Important: You must be authorised to work in the UK . No agencies please . Other suitable skills and experience include IT Support Technician, IT Technician, IT Support Engineer, Technical Support Technician, IT Helpdesk, IT Support Analyst, Desktop Support.
Nov 01, 2025
Full time
IT Support Technician Join OSCA Technology as an IT Support Technician and play a key role in keeping our cutting-edge diagnostic systems running smoothly. You ll support both our technicians and customers, troubleshooting issues, managing IT tools, and helping systems stay connected all while developing your IT skills in a fast-moving tech environment. Location: Nottingham- NG15 0EB Salary: £28,000-£30,000 per annum circa Type: Full-time, Permanent About OSCA Technology We combine digital innovation with automotive expertise to create advanced diagnostic tools used worldwide. Based in Nottingham , our team is passionate about making vehicle diagnostics smarter, faster, and more connected. What You ll Be Doing Setting up new starters with system and hardware access (e.g. Freshdesk, OSCA tools ). Purchasing tool tickets and subscriptions, with support from senior team members . Troubleshooting issues with diagnostic tools and vehicle connections . Managing updates and maintenance for diagnostic tools and local IT infrastructure . Testing and investigating OSCA tools returned by customers. Handling support calls from customers with connection or configuration issues . Assisting with onboarding new partners and completing related admin tasks. Working with senior IT staff on data retrieval, manipulation, and presentation . Supporting technicians in resolving connectivity and tool-related challenges. Liaising with manufacturers for technical or login support when required. What We re Looking For Interest in IT and automotive diagnostics . Strong problem-solving skills and attention to detail . Collaborative, proactive approach with excellent communication. Eagerness to learn and grow in a fast-paced tech environment. Benefits & Development Increased holiday allowance with year of service. Death in service policy. Sick Pay. Salary Extras . Free on-site parking . Salary extras instant discounts. Employee Assistance Programme (EAP). Opportunities to develop technical expertise in automotive diagnostics . Important: You must be authorised to work in the UK . No agencies please . Other suitable skills and experience include IT Support Technician, IT Technician, IT Support Engineer, Technical Support Technician, IT Helpdesk, IT Support Analyst, Desktop Support.
