Fire and Security Engineer South Devon and Cornwall Mobile £38k Company van with personal use Holidays and Sick pay Are you a Fire and Security Engineer based in South Devon and currently open to a new role working for one of the UKS leading service providers. This company specialise in the Facilities service and maintenance to various commercial properties across the South Devon and Cornwall region, due to a new contract win they are now recruiting a Fire and Security Engineer to join their team. As Fire and Security Engineer you will be responsible for the following tasks To carry out Fire, Security, CCTV Planned Maintenance (PPMs), Reactive works with additional capability to assist with M&E repairs and support with minor Fire, Security and CCTV projects to a high level standard in accordance with the SFG20 or manufacturers recommendations. Key Responsibilities PPM in adherence to set NSI & BAFE standards. All in accordance with the Health & Safety at Work Act requirement and to company safety procedures and contract specification. Respond to Reactive Works to include all Mechanical & Electrical and minor fabric issues. Adhere to the out of hours call out rota (as required). Correct and timely completion of paperwork according to company policy and procedure. Provide engineering condition reports and quotations. Logbook auditing. Good customer interface skills. Demonstrate competence in all areas of your primary trade (with valid certification) Delivery of service excellence Reasonable understanding and a proactive approach to the following other trade Hold Fire Alarm, CCTV and Security certification for maintenance and testing requirements Qualifications Minimum of trade qualifications in Fire and Security Systems & Electrical competencies. For further information on the role and the company you will be working for please APPLY NOW or get in touch with Rhymel Henderson for a confidential chat.
Oct 31, 2025
Full time
Fire and Security Engineer South Devon and Cornwall Mobile £38k Company van with personal use Holidays and Sick pay Are you a Fire and Security Engineer based in South Devon and currently open to a new role working for one of the UKS leading service providers. This company specialise in the Facilities service and maintenance to various commercial properties across the South Devon and Cornwall region, due to a new contract win they are now recruiting a Fire and Security Engineer to join their team. As Fire and Security Engineer you will be responsible for the following tasks To carry out Fire, Security, CCTV Planned Maintenance (PPMs), Reactive works with additional capability to assist with M&E repairs and support with minor Fire, Security and CCTV projects to a high level standard in accordance with the SFG20 or manufacturers recommendations. Key Responsibilities PPM in adherence to set NSI & BAFE standards. All in accordance with the Health & Safety at Work Act requirement and to company safety procedures and contract specification. Respond to Reactive Works to include all Mechanical & Electrical and minor fabric issues. Adhere to the out of hours call out rota (as required). Correct and timely completion of paperwork according to company policy and procedure. Provide engineering condition reports and quotations. Logbook auditing. Good customer interface skills. Demonstrate competence in all areas of your primary trade (with valid certification) Delivery of service excellence Reasonable understanding and a proactive approach to the following other trade Hold Fire Alarm, CCTV and Security certification for maintenance and testing requirements Qualifications Minimum of trade qualifications in Fire and Security Systems & Electrical competencies. For further information on the role and the company you will be working for please APPLY NOW or get in touch with Rhymel Henderson for a confidential chat.
An exciting opportunity has arisen for a Lead Systems Architect - Electronics to join an established and forward-thinking engineering team within a UK-based technology company located in Kent. The successful Lead Systems Architect - Electronics will define, design, and oversee system architecture for new product development, ensuring seamless integration of mechanical, electrical, and software comp click apply for full job details
Oct 31, 2025
Full time
An exciting opportunity has arisen for a Lead Systems Architect - Electronics to join an established and forward-thinking engineering team within a UK-based technology company located in Kent. The successful Lead Systems Architect - Electronics will define, design, and oversee system architecture for new product development, ensuring seamless integration of mechanical, electrical, and software comp click apply for full job details
Position Summary We are seeking a skilled and detail-oriented Electrician to join our team, specializing in the assembly, wiring, testing, and installation of electrical control panels . The ideal candidate will possess a solid understanding of electrical systems, the ability to interpret wiring diagrams and schematics, and hands-on experience in both panel manufacturing and field installations. Key Responsibilities Assemble, wire, and test electrical control panels in accordance with schematics, technical drawings, and specifications. Perform troubleshooting, diagnostics, and repairs on electrical panels and related systems. Accurately route, terminate, and label wiring in a neat and organized manner. Ensure all work complies with relevant electrical codes, safety regulations, and internal quality standards. Collaborate effectively with engineers and supervisors to meet project design and installation requirements. Maintain tools and equipment in good condition and uphold a clean, safe, and organized work environment. Qualifications Completion of a recognized electrical apprenticeship or equivalent certification. Strong knowledge of electrical components, wiring methods, and safe work practices. Proven ability to read and interpret wiring diagrams, schematics, and technical documentation. Proficiency in the use of hand tools, power tools, and electrical testing equipment. Familiarity with PLCs, motor controls, and automation systems is considered an asset. Excellent troubleshooting and problem-solving skills with strong attention to detail. Capable of working independently and collaboratively within a team environment. Skills and Knowledge DESIRABLE Familiarity with motor control systems, PLCs, and automation equipment Experience in industrial, manufacturing, or energy sector environments Experience working within ISO-certified QHSE frameworks Basic mechanical assembly experience (or willingness to assist where needed) A strong focus on continual improvement within own self, department and company. Ability to work independently and in a team environment ESSENTIAL Proven experience in panel building and electrical system installation Ability to read and interpret wiring diagrams, schematics, and technical drawings Strong problem-solving skills and attention to detail Excellent cable management skills (crimping, soldering, routing) Knowledge of relevant electrical regulations and safety practices A positive, professional attitude and strong work ethic Perform troubleshooting, diagnostics, and repairs on panels and electrical systems. EDUCATION Completed a recognised electrical apprenticeship Strong knowledge of electrical components and wiring methods. Job Types: Full-time, Permanent Pay: £19.50-£21.00 per hour Benefits: Company pension Life insurance On-site parking Private medical insurance Ability to commute/relocate: Aberdeen: reliably commute or plan to relocate before starting work (required) Experience: reading wiring diagrams: 5 years (required) Electrical wiring: 5 years (required) electrical panel building: 5 years (required) Licence/Certification: Electrical Apprenticeship (required) Work Location: In person
Oct 31, 2025
Full time
Position Summary We are seeking a skilled and detail-oriented Electrician to join our team, specializing in the assembly, wiring, testing, and installation of electrical control panels . The ideal candidate will possess a solid understanding of electrical systems, the ability to interpret wiring diagrams and schematics, and hands-on experience in both panel manufacturing and field installations. Key Responsibilities Assemble, wire, and test electrical control panels in accordance with schematics, technical drawings, and specifications. Perform troubleshooting, diagnostics, and repairs on electrical panels and related systems. Accurately route, terminate, and label wiring in a neat and organized manner. Ensure all work complies with relevant electrical codes, safety regulations, and internal quality standards. Collaborate effectively with engineers and supervisors to meet project design and installation requirements. Maintain tools and equipment in good condition and uphold a clean, safe, and organized work environment. Qualifications Completion of a recognized electrical apprenticeship or equivalent certification. Strong knowledge of electrical components, wiring methods, and safe work practices. Proven ability to read and interpret wiring diagrams, schematics, and technical documentation. Proficiency in the use of hand tools, power tools, and electrical testing equipment. Familiarity with PLCs, motor controls, and automation systems is considered an asset. Excellent troubleshooting and problem-solving skills with strong attention to detail. Capable of working independently and collaboratively within a team environment. Skills and Knowledge DESIRABLE Familiarity with motor control systems, PLCs, and automation equipment Experience in industrial, manufacturing, or energy sector environments Experience working within ISO-certified QHSE frameworks Basic mechanical assembly experience (or willingness to assist where needed) A strong focus on continual improvement within own self, department and company. Ability to work independently and in a team environment ESSENTIAL Proven experience in panel building and electrical system installation Ability to read and interpret wiring diagrams, schematics, and technical drawings Strong problem-solving skills and attention to detail Excellent cable management skills (crimping, soldering, routing) Knowledge of relevant electrical regulations and safety practices A positive, professional attitude and strong work ethic Perform troubleshooting, diagnostics, and repairs on panels and electrical systems. EDUCATION Completed a recognised electrical apprenticeship Strong knowledge of electrical components and wiring methods. Job Types: Full-time, Permanent Pay: £19.50-£21.00 per hour Benefits: Company pension Life insurance On-site parking Private medical insurance Ability to commute/relocate: Aberdeen: reliably commute or plan to relocate before starting work (required) Experience: reading wiring diagrams: 5 years (required) Electrical wiring: 5 years (required) electrical panel building: 5 years (required) Licence/Certification: Electrical Apprenticeship (required) Work Location: In person
Electrical Maintenance Engineer Continentals - Days/Nights up to £44,700 (Dependant on experience) We are looking for a motivated Electrical Maintenance Engineer to join a market leading company in their respective field. Reporting directly to the maintenance manager you will be a key member in ensuring the production facility is kept running. You will be involved in all aspects of planned and reactive maintenance within their operation. With progressive training and development this company is always looking to enhance its employees and their skill sets, whilst additionally being supported by a welcoming team of engineers. The position will appeal to a strong engineer looking for their next challenging role within in a secure and stable company. Role Description Strong manufacturing experience Single Phase, 3 Phase, Panel Contols, Motors Hydraulics and Pneumatics Skills and Qualifications NVQ Fault Finding ability either Electrical or Mechanical 18th Edition In return for your commitment my client offers a stable and secure career for a technically motivated engineer. If you feel this is of interest, please call Luke Donnison for a confidential discussion on
Oct 31, 2025
Full time
Electrical Maintenance Engineer Continentals - Days/Nights up to £44,700 (Dependant on experience) We are looking for a motivated Electrical Maintenance Engineer to join a market leading company in their respective field. Reporting directly to the maintenance manager you will be a key member in ensuring the production facility is kept running. You will be involved in all aspects of planned and reactive maintenance within their operation. With progressive training and development this company is always looking to enhance its employees and their skill sets, whilst additionally being supported by a welcoming team of engineers. The position will appeal to a strong engineer looking for their next challenging role within in a secure and stable company. Role Description Strong manufacturing experience Single Phase, 3 Phase, Panel Contols, Motors Hydraulics and Pneumatics Skills and Qualifications NVQ Fault Finding ability either Electrical or Mechanical 18th Edition In return for your commitment my client offers a stable and secure career for a technically motivated engineer. If you feel this is of interest, please call Luke Donnison for a confidential discussion on
Our client, based near Saffron Walden, is looking for a Facilities and Maintenance Assistant to join their family business. The Facilities and Maintenance Assistant will be supporting operations across a number of sites. This is a full-time role which has a two week rota, working every other weekend. The ideal candidate will be competent in basic carpentry and plumbing, as well as in general handyman-style maintenance. Many of the builds on the properties are made from rustic wood and so a creative flair is desirable. Key Responsibilities Performing property readiness checks prior to guest arrivals Maintaining and preparing hot tubs and pools to hygiene standards Completing minor repairs, damage reports, and general upkeep Mowing lawns and providing basic garden maintenance Responding to occasional out-of-hours maintenance issues Assisting with minor repairs, painting, and basic carpentry or metalwork Supporting the engineering team with routine tasks (mechanical/electrical) Conducting site checks (fences, paths, signage) to maintain safety and presentation Carrying out seasonal duties (e.g. gritting, watering, leaf clearance) Maintaining grounds, including lawn mowing and hedge trimming Storing tools and equipment correctly and reporting any issues The ideal candidate will have the following skills and knowledge: A reliable, adaptable individual with a strong work ethic Comfortable working outdoors in all weather conditions Confident managing time across two sites and adjusting to seasonal needs Basic knowledge of maintenance tasks Confident user of IT Strong problem-solving skills and attention to detail Basic carpentry and plumbing knowledge and experience General maintenance knowledge and experience.
Oct 31, 2025
Full time
Our client, based near Saffron Walden, is looking for a Facilities and Maintenance Assistant to join their family business. The Facilities and Maintenance Assistant will be supporting operations across a number of sites. This is a full-time role which has a two week rota, working every other weekend. The ideal candidate will be competent in basic carpentry and plumbing, as well as in general handyman-style maintenance. Many of the builds on the properties are made from rustic wood and so a creative flair is desirable. Key Responsibilities Performing property readiness checks prior to guest arrivals Maintaining and preparing hot tubs and pools to hygiene standards Completing minor repairs, damage reports, and general upkeep Mowing lawns and providing basic garden maintenance Responding to occasional out-of-hours maintenance issues Assisting with minor repairs, painting, and basic carpentry or metalwork Supporting the engineering team with routine tasks (mechanical/electrical) Conducting site checks (fences, paths, signage) to maintain safety and presentation Carrying out seasonal duties (e.g. gritting, watering, leaf clearance) Maintaining grounds, including lawn mowing and hedge trimming Storing tools and equipment correctly and reporting any issues The ideal candidate will have the following skills and knowledge: A reliable, adaptable individual with a strong work ethic Comfortable working outdoors in all weather conditions Confident managing time across two sites and adjusting to seasonal needs Basic knowledge of maintenance tasks Confident user of IT Strong problem-solving skills and attention to detail Basic carpentry and plumbing knowledge and experience General maintenance knowledge and experience.
Job Title: CAD Lead Design Engineer Location: Barrow-in-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,017+ (DOE) What you'll be doing: Preparing technical 2D drawings, 3D CAD models, and other technical outputs in accordance with business best practice and contractual requirements Responsible for the configuration management of CAD and product data within the businesses Product Lifecycle Management (PLM) tool (Teamcenter), applying business best practices on version control and change management Work with suppliers, partners and customers to ensure product data transfer is coordinated securely and configuration control is maintained Generate and create designs with safety, design for manufacture, cost and maintainability in mind Support the creation and modification of applicable technical data pack (TDP) business management system (BMS) processes and best practice guidance (BPG's) Your skills and experiences: Essential: Knowledge in engineering and quality standards (e.g. BS 8888) and experience in 3D modelling, assembling, 2D drawing and Design for Manufacture Working knowledge of drawing standards and the application of geometric tolerances Understanding of configuration control of parts and workflow release of items and parts within a PLM system Engineering design experience (ideally mechanical) Desirable: Familiarity with specific CAD (ideally Creo Parametric), PLM tools (ideally Teamcenter) and data transfer requirements to ERP systems (ideally SAP) A HNC or equivalent in a relevant Engineering discipline Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Weapon Systems UK team As part of BAE Systems Platforms and Services sector, Weapon Systems (UK) designs, develops, manufactures and supports artillery systems, naval guns, and provides engineering capability to the wider BAE Systems business. Our global reach brings our customers a depth and breadth of expertise that meet critical needs in the air, on land, and at sea. Our mission strives for us to be our customer's trusted and affordable weapons provider, delivering enhanced effects on target and complete mission solutions. We are looking for innovation, commitment and drive to help define the future of Weapon Systems capabilities. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 30th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Oct 31, 2025
Full time
Job Title: CAD Lead Design Engineer Location: Barrow-in-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,017+ (DOE) What you'll be doing: Preparing technical 2D drawings, 3D CAD models, and other technical outputs in accordance with business best practice and contractual requirements Responsible for the configuration management of CAD and product data within the businesses Product Lifecycle Management (PLM) tool (Teamcenter), applying business best practices on version control and change management Work with suppliers, partners and customers to ensure product data transfer is coordinated securely and configuration control is maintained Generate and create designs with safety, design for manufacture, cost and maintainability in mind Support the creation and modification of applicable technical data pack (TDP) business management system (BMS) processes and best practice guidance (BPG's) Your skills and experiences: Essential: Knowledge in engineering and quality standards (e.g. BS 8888) and experience in 3D modelling, assembling, 2D drawing and Design for Manufacture Working knowledge of drawing standards and the application of geometric tolerances Understanding of configuration control of parts and workflow release of items and parts within a PLM system Engineering design experience (ideally mechanical) Desirable: Familiarity with specific CAD (ideally Creo Parametric), PLM tools (ideally Teamcenter) and data transfer requirements to ERP systems (ideally SAP) A HNC or equivalent in a relevant Engineering discipline Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Weapon Systems UK team As part of BAE Systems Platforms and Services sector, Weapon Systems (UK) designs, develops, manufactures and supports artillery systems, naval guns, and provides engineering capability to the wider BAE Systems business. Our global reach brings our customers a depth and breadth of expertise that meet critical needs in the air, on land, and at sea. Our mission strives for us to be our customer's trusted and affordable weapons provider, delivering enhanced effects on target and complete mission solutions. We are looking for innovation, commitment and drive to help define the future of Weapon Systems capabilities. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 30th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Plumbing Engineer Location: West Yorkshire Salary: 16.50 - 18.00 Industry: Construction Job Overview Our client specialises in providing electrical, mechanical, building and joinery services for a broad range of clients. These clients range from the care industry to some of the largest operators in the hospitality business. The work can be varied from reactive maintenance call out to a care home without heating to completing new build or refurbishment project for a high-profile high-street hospitality client across the UK. Both are equally as important. The majority of the role will be field based however there will be a requirement to visit the office when required. Responsibilities Undertake reactive maintenance assignments in such a manner to support the objectives of the client. Complete new build and refurbishment projects to a high standard and on a fixed schedule. Complete planned maintenance and testing. out minor works installations including testing and inspection, and on completion, issue valid test certificates Ensure the facilities are maintained to the levels specified and in line with the Service Level Agreements in place. Carry out minor works installations Undertake planned and cyclical maintenance work Undertake maintenance duties in such a manner to support the objectives of the client Ensure safe operation of all plant, equipment and tools following safe working methods at all times. An ability to operate electronic tablet system and to complete duties such as submitting time sheets and expense claims. Qualifications Proven experience in plumbing engineering or a related field. Strong mechanical knowledge with the ability to troubleshoot issues effectively. Experience in installation and maintenance work preferred. Unvented hot water systems (G3) would be an advantage. An understanding of current Health & Safety and safe working practises An understanding of working to agreed Service Level Agreements is an advantage. Full driving licence If you are interested in applying for this position and would like to learn more, send your CV in confidence to the team here at YCR, and we will be in touch shortly. Job Title: Plumbing Engineer Location: West Yorkshire Salary: 16.50 - 18.00 Industry: Construction
Oct 31, 2025
Full time
Job Title: Plumbing Engineer Location: West Yorkshire Salary: 16.50 - 18.00 Industry: Construction Job Overview Our client specialises in providing electrical, mechanical, building and joinery services for a broad range of clients. These clients range from the care industry to some of the largest operators in the hospitality business. The work can be varied from reactive maintenance call out to a care home without heating to completing new build or refurbishment project for a high-profile high-street hospitality client across the UK. Both are equally as important. The majority of the role will be field based however there will be a requirement to visit the office when required. Responsibilities Undertake reactive maintenance assignments in such a manner to support the objectives of the client. Complete new build and refurbishment projects to a high standard and on a fixed schedule. Complete planned maintenance and testing. out minor works installations including testing and inspection, and on completion, issue valid test certificates Ensure the facilities are maintained to the levels specified and in line with the Service Level Agreements in place. Carry out minor works installations Undertake planned and cyclical maintenance work Undertake maintenance duties in such a manner to support the objectives of the client Ensure safe operation of all plant, equipment and tools following safe working methods at all times. An ability to operate electronic tablet system and to complete duties such as submitting time sheets and expense claims. Qualifications Proven experience in plumbing engineering or a related field. Strong mechanical knowledge with the ability to troubleshoot issues effectively. Experience in installation and maintenance work preferred. Unvented hot water systems (G3) would be an advantage. An understanding of current Health & Safety and safe working practises An understanding of working to agreed Service Level Agreements is an advantage. Full driving licence If you are interested in applying for this position and would like to learn more, send your CV in confidence to the team here at YCR, and we will be in touch shortly. Job Title: Plumbing Engineer Location: West Yorkshire Salary: 16.50 - 18.00 Industry: Construction
Job Title: Principal Electrical, Control & Instrumentation Engineer - Site Specialist Engineering Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Setting site engineering standards and requirements for electrical and control equipment/systems/facilities Providing advice and guidance with respect to the design in relation to electrical & control systems in the context of site facilities, including the application of design standards Reviewing electrical & control drawings, schematics and design packages Acting as a subject matter expert providing technical advice for sitewide control systems to operations, maintenance and projects Reviewing proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards Production of engineering documentation (technical reports, operating instructions and process instructions) ensuring that it is appropriately classified, is authorised through due process and maintained under configuration control Your skills and experience: Essential: Experience in an EC&I engineering role, predominantly C&I Experience in machine/crane control systems Experience with BMS systems & alarm and communication systems Desirable: Experience of functional safety design Experience and understanding of Radio frequency and EMC within an industrial environment Experience with FMECA (Failure Mode, Effects, and Criticality Analysis) Degree qualified in electrical engineering or relevant experience Registered with an Engineering professional institute and have the ability to achieve chartered status Proven engineering experience within a technical role with transferrable skills Experience within a Nuclear Environment to relevant ONR License Conditions or similar highly regulated business would be desirable Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing, and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Site Specialist Engineering Electrical (SSE) team: Join a multi-disciplinary engineering team setting site standards and requirements across Electrical, Mechanical, and Civil/Structural disciplines. In this role, you'll provide technical support in electrical engineering - including HV/LV power distribution, control and instrumentation, alarms, and functional safety systems - ensuring compliance with legislation and processes across a range of projects and facilities. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing date: 2 nd November 2025. We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Oct 31, 2025
Full time
Job Title: Principal Electrical, Control & Instrumentation Engineer - Site Specialist Engineering Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Setting site engineering standards and requirements for electrical and control equipment/systems/facilities Providing advice and guidance with respect to the design in relation to electrical & control systems in the context of site facilities, including the application of design standards Reviewing electrical & control drawings, schematics and design packages Acting as a subject matter expert providing technical advice for sitewide control systems to operations, maintenance and projects Reviewing proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards Production of engineering documentation (technical reports, operating instructions and process instructions) ensuring that it is appropriately classified, is authorised through due process and maintained under configuration control Your skills and experience: Essential: Experience in an EC&I engineering role, predominantly C&I Experience in machine/crane control systems Experience with BMS systems & alarm and communication systems Desirable: Experience of functional safety design Experience and understanding of Radio frequency and EMC within an industrial environment Experience with FMECA (Failure Mode, Effects, and Criticality Analysis) Degree qualified in electrical engineering or relevant experience Registered with an Engineering professional institute and have the ability to achieve chartered status Proven engineering experience within a technical role with transferrable skills Experience within a Nuclear Environment to relevant ONR License Conditions or similar highly regulated business would be desirable Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing, and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Site Specialist Engineering Electrical (SSE) team: Join a multi-disciplinary engineering team setting site standards and requirements across Electrical, Mechanical, and Civil/Structural disciplines. In this role, you'll provide technical support in electrical engineering - including HV/LV power distribution, control and instrumentation, alarms, and functional safety systems - ensuring compliance with legislation and processes across a range of projects and facilities. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing date: 2 nd November 2025. We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Position: Business Development Manager Region: The Midlands Sector: Ventilation Systems Salary: 45,000- 55,000 + Car + Bonus (up to 20%) A market-leading supplier of mechanical ventilation solutions is expanding their sales presence in the Midlands. They require a Business Development Manager with technical expertise to strengthen relationships with contractors, consultants, and architects across the region. Role Focus: Represent advanced mechanical ventilation systems to industry stakeholders. Support the project lifecycle from specification and quotation through to closing. Deliver CPD seminars and technical product demonstrations. Conduct detailed site visits to align solutions with project requirements. Develop strategy in line with regulations and compliance standards. Report monthly on sales progress and maintain an accurate CRM pipeline. Background Required: Degree (or equivalent experience) within business, building services, or engineering. At least 3 years in technical sales within HVAC, construction, or M&E building services. Knowledge of regulations surrounding mechanical ventilation. Strong negotiation skills and a consultative sales approach. This role offers an excellent opportunity for a technically-minded sales professional seeking progression with a reputable manufacturer offering innovation and support for sustainable building solutions. INDS
Oct 31, 2025
Full time
Position: Business Development Manager Region: The Midlands Sector: Ventilation Systems Salary: 45,000- 55,000 + Car + Bonus (up to 20%) A market-leading supplier of mechanical ventilation solutions is expanding their sales presence in the Midlands. They require a Business Development Manager with technical expertise to strengthen relationships with contractors, consultants, and architects across the region. Role Focus: Represent advanced mechanical ventilation systems to industry stakeholders. Support the project lifecycle from specification and quotation through to closing. Deliver CPD seminars and technical product demonstrations. Conduct detailed site visits to align solutions with project requirements. Develop strategy in line with regulations and compliance standards. Report monthly on sales progress and maintain an accurate CRM pipeline. Background Required: Degree (or equivalent experience) within business, building services, or engineering. At least 3 years in technical sales within HVAC, construction, or M&E building services. Knowledge of regulations surrounding mechanical ventilation. Strong negotiation skills and a consultative sales approach. This role offers an excellent opportunity for a technically-minded sales professional seeking progression with a reputable manufacturer offering innovation and support for sustainable building solutions. INDS
Shift Engineer - London At Bulgari Hotel London , exceptional service and Italian elegance define everything we do. We are currently seeking a Shift Engineer to join our Engineering team - with a primary focus on night shifts while maintaining flexibility to support day operations when required. As a Shift Engineer , you will ensure the flawless operation, safety, and maintenance of all hotel systems, facilities, and equipment. You'll be a key part of a small, dedicated team that upholds the highest standards of presentation and performance throughout the property, ensuring guests experience the uncompromising luxury synonymous with Bulgari. Key Responsibilities Conduct regular inspections and preventative maintenance across mechanical, electrical, and plumbing systems. Respond promptly to guest and operational maintenance requests, particularly during night shifts. Monitor building management systems (BMS) and ensure compliance with health, safety, and fire regulations. Support smooth handovers between day and night shifts, ensuring clear communication and continuity. Maintain detailed records of works completed, materials used, and any incidents or system anomalies. Requirements Proven experience as a Hotel Shift Engineer, Maintenance Technician, or similar role within a luxury hospitality environment. Strong knowledge of HVAC, electrical, plumbing, and mechanical systems. Excellent problem-solving skills with the ability to remain calm under pressure. Flexibility to work predominantly night shifts, including weekends and bank holidays. Professional, polished appearance and a guest-focused mindset. Why Join Bulgari Hotel London You'll be part of a world-class team that embodies craftsmanship, discretion, and passion for excellence. We offer a refined and supportive environment, competitive compensation, and opportunities for personal and professional growth within the Marriott and Bulgari brands.
Oct 31, 2025
Full time
Shift Engineer - London At Bulgari Hotel London , exceptional service and Italian elegance define everything we do. We are currently seeking a Shift Engineer to join our Engineering team - with a primary focus on night shifts while maintaining flexibility to support day operations when required. As a Shift Engineer , you will ensure the flawless operation, safety, and maintenance of all hotel systems, facilities, and equipment. You'll be a key part of a small, dedicated team that upholds the highest standards of presentation and performance throughout the property, ensuring guests experience the uncompromising luxury synonymous with Bulgari. Key Responsibilities Conduct regular inspections and preventative maintenance across mechanical, electrical, and plumbing systems. Respond promptly to guest and operational maintenance requests, particularly during night shifts. Monitor building management systems (BMS) and ensure compliance with health, safety, and fire regulations. Support smooth handovers between day and night shifts, ensuring clear communication and continuity. Maintain detailed records of works completed, materials used, and any incidents or system anomalies. Requirements Proven experience as a Hotel Shift Engineer, Maintenance Technician, or similar role within a luxury hospitality environment. Strong knowledge of HVAC, electrical, plumbing, and mechanical systems. Excellent problem-solving skills with the ability to remain calm under pressure. Flexibility to work predominantly night shifts, including weekends and bank holidays. Professional, polished appearance and a guest-focused mindset. Why Join Bulgari Hotel London You'll be part of a world-class team that embodies craftsmanship, discretion, and passion for excellence. We offer a refined and supportive environment, competitive compensation, and opportunities for personal and professional growth within the Marriott and Bulgari brands.
Join Electron-X as an Electrical Mechanical Fitter At Electron-X, we specialise in high-quality industrial X-ray systems and services-from large lead-lined rooms for aircraft engines and advanced multi-axis manipulators to compact cabinets for inspecting electronic components. We're expanding and looking for a skilled electrical/mechanical engineer to join our team in Milton Keynes as soon as possible. What You'll Be Doing Building electrical panels Reading and working to wiring diagrams and panel layouts Electrical Installation Cable management installation at the factory and on site Mechanical Assembly Bonus Skills - Familiarity with computers and software tools is a plus What We're Looking For Experience in panel building Strong MS Office skills (Teams, Word & Excel) Excellent written and verbal communication Quick learner with a proactive attitude ECS card is beneficial but not essential Full UK driving license required Experience in the X-ray industry is not required-full training and support will be provided. The Offer Location: Milton Keynes office Hours: Monday to Friday, 9am-5pm 6-month contract with possible extension Salary: £26,000-£32,000 pro rata depending on experience Discretionary Christmas Bonus Flexible & Friendly employer We're keen to hear about any additional skills or experience you bring-tell us what makes you stand out! Ready to Apply? Send your CV by using the apply button provided Learn more about us on our website No recruiters please.
Oct 31, 2025
Contractor
Join Electron-X as an Electrical Mechanical Fitter At Electron-X, we specialise in high-quality industrial X-ray systems and services-from large lead-lined rooms for aircraft engines and advanced multi-axis manipulators to compact cabinets for inspecting electronic components. We're expanding and looking for a skilled electrical/mechanical engineer to join our team in Milton Keynes as soon as possible. What You'll Be Doing Building electrical panels Reading and working to wiring diagrams and panel layouts Electrical Installation Cable management installation at the factory and on site Mechanical Assembly Bonus Skills - Familiarity with computers and software tools is a plus What We're Looking For Experience in panel building Strong MS Office skills (Teams, Word & Excel) Excellent written and verbal communication Quick learner with a proactive attitude ECS card is beneficial but not essential Full UK driving license required Experience in the X-ray industry is not required-full training and support will be provided. The Offer Location: Milton Keynes office Hours: Monday to Friday, 9am-5pm 6-month contract with possible extension Salary: £26,000-£32,000 pro rata depending on experience Discretionary Christmas Bonus Flexible & Friendly employer We're keen to hear about any additional skills or experience you bring-tell us what makes you stand out! Ready to Apply? Send your CV by using the apply button provided Learn more about us on our website No recruiters please.
Joining Arup Arup's purpose, shared values and collaborative approach has set us apart for over 75 years, guiding how we shape a better world. Around the globe, Arup's mechanical engineers bring specialist expertise to solutions for buildings, transport infrastructure and energy, water and waste utilities. Our comprehensive services to the energy, water and resources sectors include development of solutions for utilities and infrastructure assets, industrial processes and manufacturing systems, renewable energy and storage and sustainable mechanical system design. We are trusted to bring inventive solutions to complex technical challenges: from exemplar projects such as Green Hydrogen Production facilities to Toddbrook Reservoir repair. 'Watch this short clip to discover how Arup are shaping a better world and how you could be a part of it!' The Opportunity We are seeking Senior Mechanical Engineers to join our Water team and contribute to the delivery of robust, efficient engineering solutions across the water industry. In this role, you will take ownership of the design and execution of water and wastewater treatment projects, including pumping systems and transmission infrastructure. Ideally you will be based in Leeds or Cardiff, however these vacancies are open to a number of our UK offices including; Birmingham, Manchester, Sheffield and Liverpool. You'll work on technically challenging and high-value projects within long-term frameworks for major UK water utilities such as United Utilities, Severn Trent Water, Welsh Water and Wessex frameworks. You will apply your technical expertise, lead key project tasks, and provide guidance to junior team members. Building and maintaining strong relationships with clients and partners will be an essential part of the role. As a Senior Mechanical Engineer, you will lead the mechanical design and delivery of water sector projects from feasibility through to construction. You will provide technical direction to multidisciplinary teams, with a focus on treatment systems, pumping solutions, and pipework design. The role involves overseeing and supporting the work of junior engineers and technicians, ensuring high standards across all stages of project delivery. You will engage directly with clients to meet technical requirements, manage timelines, and stay within budget. In addition, you will contribute to work-winning activities, including the preparation of project bids, proposals, and participation in client meetings. You will make effective use of digital tools such as BIM and Plant 3D to enhance project outcomes and will be expected to promote a culture of technical rigour, operational efficiency, and innovation within the team. The available positions are for senior engineers with experience in water, including treatment facilities, pumping systems and pipework. We want people who are self motivated and able to adapt to the demands of projects and clients, someone who will enjoy solving problems and working with our multidisciplinary teams to deliver high quality solutions. Is this role right for you? We are seeking the below skills and knowledge: Proven experience delivering mechanical designs in the water utilities sector, including treatment facilities and pumping systems Chartered Engineer (CEng) status with IMechE or relevant body, or progressing toward chartership Sound knowledge of current mechanical design standards and practices in the UK water industry Proficiency in using digital design software (e.g., BIM, Plant 3D) Clear communication skills and the ability to work effectively within multidisciplinary teams A results-oriented mindset, with the ability to manage priorities and deliver high-quality work on time Not ready to apply just yet, or have a few questions? Please note, to ensure we remain GDPR compliant do not send your CV directly to us via this email. What we offer you At Arup, we care about each member's success, so we can grow together. Guided by our values, we provide an attractive total reward package that recognises the contribution of each of our members to our shared success. As well as competitive, fair and equitable pay, we offer a career in which all of our members can belong, grow and thrive - through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do. We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup's legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling members to share in the results of our collective efforts. We also provide Private medical insurance, Life assurance, Accident insurance and Income protection cover. In addition, you'll have access to flexible benefits to help you look after all aspects of your wellbeing and give you the freedom and flexibility to find the best solutions for you, your family, and your individual needs. Different people, shared values Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at We are committed to making our recruitment process and workplaces accessible to all candidates. Please contact Kylie O'Hanlon at to let us know if you need any assistance or reasonable adjustments throughout your application or interview process, and/or to perform the essential functions of the role. We will do everything we can to support you. Our Application Process To understand what to expect next, please visit Stay safe online - Arup will never ask for your bank details as part of our recruitment process. Recruitment Agencies - We have a Preferred Supplier List of trusted partners to assist us when required and do not acknowledge any speculative CVs or unsolicited candidate introductions from agencies not on the list.
Oct 31, 2025
Full time
Joining Arup Arup's purpose, shared values and collaborative approach has set us apart for over 75 years, guiding how we shape a better world. Around the globe, Arup's mechanical engineers bring specialist expertise to solutions for buildings, transport infrastructure and energy, water and waste utilities. Our comprehensive services to the energy, water and resources sectors include development of solutions for utilities and infrastructure assets, industrial processes and manufacturing systems, renewable energy and storage and sustainable mechanical system design. We are trusted to bring inventive solutions to complex technical challenges: from exemplar projects such as Green Hydrogen Production facilities to Toddbrook Reservoir repair. 'Watch this short clip to discover how Arup are shaping a better world and how you could be a part of it!' The Opportunity We are seeking Senior Mechanical Engineers to join our Water team and contribute to the delivery of robust, efficient engineering solutions across the water industry. In this role, you will take ownership of the design and execution of water and wastewater treatment projects, including pumping systems and transmission infrastructure. Ideally you will be based in Leeds or Cardiff, however these vacancies are open to a number of our UK offices including; Birmingham, Manchester, Sheffield and Liverpool. You'll work on technically challenging and high-value projects within long-term frameworks for major UK water utilities such as United Utilities, Severn Trent Water, Welsh Water and Wessex frameworks. You will apply your technical expertise, lead key project tasks, and provide guidance to junior team members. Building and maintaining strong relationships with clients and partners will be an essential part of the role. As a Senior Mechanical Engineer, you will lead the mechanical design and delivery of water sector projects from feasibility through to construction. You will provide technical direction to multidisciplinary teams, with a focus on treatment systems, pumping solutions, and pipework design. The role involves overseeing and supporting the work of junior engineers and technicians, ensuring high standards across all stages of project delivery. You will engage directly with clients to meet technical requirements, manage timelines, and stay within budget. In addition, you will contribute to work-winning activities, including the preparation of project bids, proposals, and participation in client meetings. You will make effective use of digital tools such as BIM and Plant 3D to enhance project outcomes and will be expected to promote a culture of technical rigour, operational efficiency, and innovation within the team. The available positions are for senior engineers with experience in water, including treatment facilities, pumping systems and pipework. We want people who are self motivated and able to adapt to the demands of projects and clients, someone who will enjoy solving problems and working with our multidisciplinary teams to deliver high quality solutions. Is this role right for you? We are seeking the below skills and knowledge: Proven experience delivering mechanical designs in the water utilities sector, including treatment facilities and pumping systems Chartered Engineer (CEng) status with IMechE or relevant body, or progressing toward chartership Sound knowledge of current mechanical design standards and practices in the UK water industry Proficiency in using digital design software (e.g., BIM, Plant 3D) Clear communication skills and the ability to work effectively within multidisciplinary teams A results-oriented mindset, with the ability to manage priorities and deliver high-quality work on time Not ready to apply just yet, or have a few questions? Please note, to ensure we remain GDPR compliant do not send your CV directly to us via this email. What we offer you At Arup, we care about each member's success, so we can grow together. Guided by our values, we provide an attractive total reward package that recognises the contribution of each of our members to our shared success. As well as competitive, fair and equitable pay, we offer a career in which all of our members can belong, grow and thrive - through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do. We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup's legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling members to share in the results of our collective efforts. We also provide Private medical insurance, Life assurance, Accident insurance and Income protection cover. In addition, you'll have access to flexible benefits to help you look after all aspects of your wellbeing and give you the freedom and flexibility to find the best solutions for you, your family, and your individual needs. Different people, shared values Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at We are committed to making our recruitment process and workplaces accessible to all candidates. Please contact Kylie O'Hanlon at to let us know if you need any assistance or reasonable adjustments throughout your application or interview process, and/or to perform the essential functions of the role. We will do everything we can to support you. Our Application Process To understand what to expect next, please visit Stay safe online - Arup will never ask for your bank details as part of our recruitment process. Recruitment Agencies - We have a Preferred Supplier List of trusted partners to assist us when required and do not acknowledge any speculative CVs or unsolicited candidate introductions from agencies not on the list.
Travail Employment Group
Chipping Sodbury, Gloucestershire
Forklift Engineer 32,000 + OT, Permanent,Chipping Sodbury, BS37, 8am -4:30pm/3:30pm on a Fri, M-F 22 days hols rising to 25 + bank holidays, pension. The forklift Service engineer or forklift engineer role is working in a service and repair role for an established and successful business. The position involves the service, repair and planned maintenance of material handling equipment and could be either a combination of field service and workshop based work. A company vehicle would be provided for the field service work, so a full driving licence is required. Key tasks for the forklift Service engineer or forklift engineer role The ability to diagnose equipment faults and problem solve on forklifts Repair, service and planned maintenance of the equipment Field service and workshop based work Requires the ability to work on your own in the filed after full product training or as part of a team in the workshop. Preparing customer reports and paperwork on the equipment In addition the forklift Service engineer or forklift engineer is likely to have good Mechanical, Hydraulic and if possible basic 12v Electrical experience relating to this type of equipment. Any Loler knowledge would also be advantageous. Candidates suited to this role are likely to have the following Ideally you will have experience in servicing and repairing forklifts or plant or an Agricultural engineering background with related knowledge. However general service engineering of similar equipment or a vehicle mechanic background may be suitable and product training for successful candidates would be provided. Any recognised qualifications are useful but time served experience will also be suitable. This forklift Service engineer or forklift engineer is a permanent role with a friendly, established company and team who specialise in material handling equipment. Job title: forklift Service engineer or forklift engineer Salary: 32k + Bonus up to 2,500 per annum + overtime at time and a half Location: Chipping Sodbury BS37 Duration: Permanent Hours: Monday to Thursday, 8.00 - 4.30pm and 3.30pm on Fridays 39 hours per week Benefits: 22 rising to 25 days holidays + bank holidays, pension Please apply for this role through the job board or apply direct to (url removed) or for further information, please call Adam on (phone number removed). Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy.
Oct 31, 2025
Full time
Forklift Engineer 32,000 + OT, Permanent,Chipping Sodbury, BS37, 8am -4:30pm/3:30pm on a Fri, M-F 22 days hols rising to 25 + bank holidays, pension. The forklift Service engineer or forklift engineer role is working in a service and repair role for an established and successful business. The position involves the service, repair and planned maintenance of material handling equipment and could be either a combination of field service and workshop based work. A company vehicle would be provided for the field service work, so a full driving licence is required. Key tasks for the forklift Service engineer or forklift engineer role The ability to diagnose equipment faults and problem solve on forklifts Repair, service and planned maintenance of the equipment Field service and workshop based work Requires the ability to work on your own in the filed after full product training or as part of a team in the workshop. Preparing customer reports and paperwork on the equipment In addition the forklift Service engineer or forklift engineer is likely to have good Mechanical, Hydraulic and if possible basic 12v Electrical experience relating to this type of equipment. Any Loler knowledge would also be advantageous. Candidates suited to this role are likely to have the following Ideally you will have experience in servicing and repairing forklifts or plant or an Agricultural engineering background with related knowledge. However general service engineering of similar equipment or a vehicle mechanic background may be suitable and product training for successful candidates would be provided. Any recognised qualifications are useful but time served experience will also be suitable. This forklift Service engineer or forklift engineer is a permanent role with a friendly, established company and team who specialise in material handling equipment. Job title: forklift Service engineer or forklift engineer Salary: 32k + Bonus up to 2,500 per annum + overtime at time and a half Location: Chipping Sodbury BS37 Duration: Permanent Hours: Monday to Thursday, 8.00 - 4.30pm and 3.30pm on Fridays 39 hours per week Benefits: 22 rising to 25 days holidays + bank holidays, pension Please apply for this role through the job board or apply direct to (url removed) or for further information, please call Adam on (phone number removed). Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy.
ADAS Test Technician (992) Location: Cranfield Pay: Tech E+ £19.67 per hour 5-day working week in the office, normal hours are (8:00-17:00 Mon-Thu & 8:00-13:20 Fri) We are recruiting for a ADAS Test Technician for one of our automotive clients based in Cranfield. You will be working for a globally recognised automotive company. This is a long-term contract role. The contract is on an ongoing basis a may run for several years. Key Responsibilities of the ADAS Test Technician: • Preparation / building / maintenance of vehicles, instrumentation, and data acquisition systems in line with local procedures and the clients Engineering Manuals. • Support Testing in dynamic conditions to gather accurate, timely, and quality test data/results. • Support Evaluation and concern identification including liaison with Test Engineer. • Support delivery of Key Performance Indicators for the section • Use skills to provide support to other sections as required. Vehicle preparation, instrumentation, test, and validation of function & operation: • Fundamental understanding of vehicle dis-assembly, assembly, & maintenance techniques. • UK license holder with 3 years experience, preferably LHD /European driving experience. (Any additional driving Qual s advantageous) • Vehicle CAN bus system knowledge with the ability to fault find. • Experience with Vector CAN tools not compulsory but an advantage. • Harness fabrication/repair and ability to read technical drawings a must. • Instrumentation set-up (Camera, Radar, ADAS Logging) • Data acquisition & Report writing • Microsoft Office competency required (Excel/PowerPoint) • Willingness and flexibility to travel on short notice for business purposes, typically for durations of up to two weeks. Travel commitments are expected to grow as the role evolves. • Organised, work to deadlines and can operate under own initiative. • Develop relationship with engineering team. Qualifications & Experience for the ADAS Test Technician: • C&G / BTEC L3 would be preferable, ideally in mechanical, electrical, or automotive engineering with a recognised apprenticeship or qualification within a relevant field. Vehicle preparation, instrumentation, test, and validation of function & operation: • Fundamental understanding of vehicle dis-assembly, assembly, & maintenance techniques. • UK license holder with 3 years experience, preferably LHD /European driving experience. (Any additional driving Qual s advantageous) • Vehicle CAN bus system knowledge with the ability to fault find. • Experience with Vector CAN tools not compulsory but an advantage. • Harness fabrication/repair and ability to read technical drawings a must. • Instrumentation set-up (Camera, Radar, ADAS Logging) • Data acquisition & Report writing • Microsoft Office competency required (Excel/PowerPoint) • Willingness and flexibility to travel on short notice for business purposes, typically for durations of up to two weeks. Travel commitments are expected to grow as the role evolves. • Organised, work to deadlines and can operate under own initiative. • Develop relationship with engineering team. LMIND
Oct 31, 2025
Contractor
ADAS Test Technician (992) Location: Cranfield Pay: Tech E+ £19.67 per hour 5-day working week in the office, normal hours are (8:00-17:00 Mon-Thu & 8:00-13:20 Fri) We are recruiting for a ADAS Test Technician for one of our automotive clients based in Cranfield. You will be working for a globally recognised automotive company. This is a long-term contract role. The contract is on an ongoing basis a may run for several years. Key Responsibilities of the ADAS Test Technician: • Preparation / building / maintenance of vehicles, instrumentation, and data acquisition systems in line with local procedures and the clients Engineering Manuals. • Support Testing in dynamic conditions to gather accurate, timely, and quality test data/results. • Support Evaluation and concern identification including liaison with Test Engineer. • Support delivery of Key Performance Indicators for the section • Use skills to provide support to other sections as required. Vehicle preparation, instrumentation, test, and validation of function & operation: • Fundamental understanding of vehicle dis-assembly, assembly, & maintenance techniques. • UK license holder with 3 years experience, preferably LHD /European driving experience. (Any additional driving Qual s advantageous) • Vehicle CAN bus system knowledge with the ability to fault find. • Experience with Vector CAN tools not compulsory but an advantage. • Harness fabrication/repair and ability to read technical drawings a must. • Instrumentation set-up (Camera, Radar, ADAS Logging) • Data acquisition & Report writing • Microsoft Office competency required (Excel/PowerPoint) • Willingness and flexibility to travel on short notice for business purposes, typically for durations of up to two weeks. Travel commitments are expected to grow as the role evolves. • Organised, work to deadlines and can operate under own initiative. • Develop relationship with engineering team. Qualifications & Experience for the ADAS Test Technician: • C&G / BTEC L3 would be preferable, ideally in mechanical, electrical, or automotive engineering with a recognised apprenticeship or qualification within a relevant field. Vehicle preparation, instrumentation, test, and validation of function & operation: • Fundamental understanding of vehicle dis-assembly, assembly, & maintenance techniques. • UK license holder with 3 years experience, preferably LHD /European driving experience. (Any additional driving Qual s advantageous) • Vehicle CAN bus system knowledge with the ability to fault find. • Experience with Vector CAN tools not compulsory but an advantage. • Harness fabrication/repair and ability to read technical drawings a must. • Instrumentation set-up (Camera, Radar, ADAS Logging) • Data acquisition & Report writing • Microsoft Office competency required (Excel/PowerPoint) • Willingness and flexibility to travel on short notice for business purposes, typically for durations of up to two weeks. Travel commitments are expected to grow as the role evolves. • Organised, work to deadlines and can operate under own initiative. • Develop relationship with engineering team. LMIND
Job Title: Principal Electrical, Control & Instrumentation Engineer - Site Specialist Engineering Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Setting site engineering standards and requirements for electrical and control equipment/systems/facilities Providing advice and guidance with respect to the design in relation to electrical & control systems in the context of site facilities, including the application of design standards Reviewing electrical & control drawings, schematics and design packages Acting as a subject matter expert providing technical advice for sitewide control systems to operations, maintenance and projects Reviewing proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards Production of engineering documentation (technical reports, operating instructions and process instructions) ensuring that it is appropriately classified, is authorised through due process and maintained under configuration control Your skills and experience: Essential: Experience in an EC&I engineering role, predominantly C&I Experience in machine/crane control systems Experience with BMS systems & alarm and communication systems Desirable: Experience of functional safety design Experience and understanding of Radio frequency and EMC within an industrial environment Experience with FMECA (Failure Mode, Effects, and Criticality Analysis) Degree qualified in electrical engineering or relevant experience Registered with an Engineering professional institute and have the ability to achieve chartered status Proven engineering experience within a technical role with transferrable skills Experience within a Nuclear Environment to relevant ONR License Conditions or similar highly regulated business would be desirable Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing, and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Site Specialist Engineering Electrical (SSE) team: Join a multi-disciplinary engineering team setting site standards and requirements across Electrical, Mechanical, and Civil/Structural disciplines. In this role, you'll provide technical support in electrical engineering - including HV/LV power distribution, control and instrumentation, alarms, and functional safety systems - ensuring compliance with legislation and processes across a range of projects and facilities. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing date: 2 nd November 2025. We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Oct 31, 2025
Full time
Job Title: Principal Electrical, Control & Instrumentation Engineer - Site Specialist Engineering Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Setting site engineering standards and requirements for electrical and control equipment/systems/facilities Providing advice and guidance with respect to the design in relation to electrical & control systems in the context of site facilities, including the application of design standards Reviewing electrical & control drawings, schematics and design packages Acting as a subject matter expert providing technical advice for sitewide control systems to operations, maintenance and projects Reviewing proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards Production of engineering documentation (technical reports, operating instructions and process instructions) ensuring that it is appropriately classified, is authorised through due process and maintained under configuration control Your skills and experience: Essential: Experience in an EC&I engineering role, predominantly C&I Experience in machine/crane control systems Experience with BMS systems & alarm and communication systems Desirable: Experience of functional safety design Experience and understanding of Radio frequency and EMC within an industrial environment Experience with FMECA (Failure Mode, Effects, and Criticality Analysis) Degree qualified in electrical engineering or relevant experience Registered with an Engineering professional institute and have the ability to achieve chartered status Proven engineering experience within a technical role with transferrable skills Experience within a Nuclear Environment to relevant ONR License Conditions or similar highly regulated business would be desirable Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing, and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Site Specialist Engineering Electrical (SSE) team: Join a multi-disciplinary engineering team setting site standards and requirements across Electrical, Mechanical, and Civil/Structural disciplines. In this role, you'll provide technical support in electrical engineering - including HV/LV power distribution, control and instrumentation, alarms, and functional safety systems - ensuring compliance with legislation and processes across a range of projects and facilities. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing date: 2 nd November 2025. We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Senior Project Manager Leeds Permanent Position Competitive Salary + Car/Car Allowance + Flexible Benefits Summary We have an exciting new opportunity for a mechanically biased Senior Project Manager to join our team based on our project in central Leeds. In this role you will control the overall operational delivery of a project (or part thereof), taking account of the safety, technical, commercial and managerial requirements through the whole life cycle of the project through bid and pre-commencement to successful completion. You will ensure that profitability is maintained or improved through effective leadership and management of the support functions, and high quality customer relationships. This is a permanent staff position with NG Bailey. What we're looking for: Key deliverables in this role are: Ensuring that our safety first and foremost message is visible and alive through all activities on the project Participate in bid activities to ensure a professional, profitable, successful bid which meets customer expectations Lead pre-commencement activities Maximise opportunities, efficiency and profitability in the delivery phase of the project Ensure precise provision of customer requirements by effectively reviewing the scope of works and installation methods. Identify and manage risks Lead the team, including specialist sub-contractors, through all stages of the project through to successful completion Engage in business strategy and support company communications Lead contract reviews, including preparation and submission of reports and any project related data. Prepare and update business plans with the Commercial Director Develop and maintain positive long-term customer relationships Requirements To be successful in this role you will have demonstrable mechanical building services experience in a similar role within a construction environment, with previous experience in the full lifecycle management of high value projects. Benefits 25 days holiday per annum, plus bank holidays Pension with leading provider and up to 8% employer contribution Private healthcare Free 24/7 365 Employee assistance program to support mental health and wellbeing (including counselling sessions and legal advice) Discounts Personal development programme Flexible Benefits Car/Car Allowance Salary sacrifice car scheme available If this is of interest, please apply with an up to date CV, and your salary/package expectations. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Oct 31, 2025
Full time
Senior Project Manager Leeds Permanent Position Competitive Salary + Car/Car Allowance + Flexible Benefits Summary We have an exciting new opportunity for a mechanically biased Senior Project Manager to join our team based on our project in central Leeds. In this role you will control the overall operational delivery of a project (or part thereof), taking account of the safety, technical, commercial and managerial requirements through the whole life cycle of the project through bid and pre-commencement to successful completion. You will ensure that profitability is maintained or improved through effective leadership and management of the support functions, and high quality customer relationships. This is a permanent staff position with NG Bailey. What we're looking for: Key deliverables in this role are: Ensuring that our safety first and foremost message is visible and alive through all activities on the project Participate in bid activities to ensure a professional, profitable, successful bid which meets customer expectations Lead pre-commencement activities Maximise opportunities, efficiency and profitability in the delivery phase of the project Ensure precise provision of customer requirements by effectively reviewing the scope of works and installation methods. Identify and manage risks Lead the team, including specialist sub-contractors, through all stages of the project through to successful completion Engage in business strategy and support company communications Lead contract reviews, including preparation and submission of reports and any project related data. Prepare and update business plans with the Commercial Director Develop and maintain positive long-term customer relationships Requirements To be successful in this role you will have demonstrable mechanical building services experience in a similar role within a construction environment, with previous experience in the full lifecycle management of high value projects. Benefits 25 days holiday per annum, plus bank holidays Pension with leading provider and up to 8% employer contribution Private healthcare Free 24/7 365 Employee assistance program to support mental health and wellbeing (including counselling sessions and legal advice) Discounts Personal development programme Flexible Benefits Car/Car Allowance Salary sacrifice car scheme available If this is of interest, please apply with an up to date CV, and your salary/package expectations. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
About Us SharkNinja is a global product design and technology company, with a diversified portfolio of 5-star rated lifestyle solutions that positively impact people's lives in homes around the world. Powered by two trusted, global brands, Shark and Ninja , the company has a proven track record of bringing disruptive innovation to market, and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. Headquartered in Needham, Massachusetts with more than 3,600+ associates, the company's products are sold at key retailers, online and offline, and through distributors around the world . About the Role As a Product Design Engineer II , you'll be part of our Ninja New Product Development team, helping to create the next generation of innovative kitchen and home products. You'll work as part of our London Design Office and collaborate closely with teams across the UK, US, and China to bring concepts to life and into the hands of consumers. You'll combine creativity with engineering rigor, developing mechanical systems and product solutions that delight consumers and perform brilliantly. What You'll Be Doing Developing and shaping new product concepts and technologies for future Ninja launches. Designing components, assemblies, and mechanisms that meet functional, cost, and manufacturing requirements. Taking ownership of product elements from concept, CAD modelling, and prototyping through to testing and validation. Conducting design studies to solve real technical and consumer problems. Applying solid engineering fundamentals to ensure designs are robust, reliable, and ready for mass production. Building and testing prototypes, analyzing results, and iterating quickly. Working closely with global cross-functional teams to ensure design intent is protected through tool release and manufacturing. Participating in design reviews - contributing ideas, insights, and solutions. Continuously improving performance, quality, and overall consumer value. Supporting and collaborating with senior engineers, contributing to a strong, hands-on, problem-solving culture. What You'll Bring Degree in Product Design Engineering , Mechanical Engineering , or Industrial Design Engineering . Typically 2-4 years' experience in mechanical or product design. Experience in consumer goods or household appliances is highly desirable. Strong understanding of plastics and manufacturing processes . A track record of contributing to products that have launched in market. High proficiency in SolidWorks or Creo . Hands-on prototyping and problem-solving mindset. Excellent communication and collaborative working style. Positive, curious, and proactive approach to challenges. An appreciation for electronics, software, or UX is beneficial, but not essential. Our Culture At SharkNinja, we don't just raise the bar-we push past it every single day. Our Outrageously Extraordinary mindset drives us to tackle the impossible, push boundaries, and deliver results that others only dream of. If you thrive on breaking out of your swim lane, you'll be right at home. What We Offer We offer competitive health insurance, retirement plans, paid time off, employee stock purchase options, wellness programs, SharkNinja product discounts, and more. We empower your personal and professional growth with high impact Learning Programs featuring bold voices redefining what's possible. When you join, you're not just part of a company-you're part of an outrageously extraordinary community. To gether, we won't just launch products- we'll disrupt entire markets. At SharkNinja, Diversity, Equity, and Inclusion are vital to our global success. Valuing each unique voice and blending all of our diverse skills strengthens SharkNinja's innovation every day. We support ALL associates in bringing their authentic selves to work, making an impact, and having the opportunity for career acceleration. With help from our leadership, associates, and our community, we aim to have equity be a key component of the SharkNinja DNA. Learn more about us: Life At SharkNinja Outrageously Extraordinary SharkNinja Candidate Privacy Notice For candidates based in all regions , please refer to this Candidate Privacy Notice . For candidates based in China , please refer to this Candidate Privacy Notice . For candidates based in Vietnam , please refer to this Candidate Privacy Notice . We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability, or any other class protected by legislation, and local law. SharkNinja will consider reasonable accommodations consistent with legislation, and local law. If you require a reasonable accommodation to participate in the job application or interview process, please contact SharkNinja People & Culture at
Oct 31, 2025
Full time
About Us SharkNinja is a global product design and technology company, with a diversified portfolio of 5-star rated lifestyle solutions that positively impact people's lives in homes around the world. Powered by two trusted, global brands, Shark and Ninja , the company has a proven track record of bringing disruptive innovation to market, and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. Headquartered in Needham, Massachusetts with more than 3,600+ associates, the company's products are sold at key retailers, online and offline, and through distributors around the world . About the Role As a Product Design Engineer II , you'll be part of our Ninja New Product Development team, helping to create the next generation of innovative kitchen and home products. You'll work as part of our London Design Office and collaborate closely with teams across the UK, US, and China to bring concepts to life and into the hands of consumers. You'll combine creativity with engineering rigor, developing mechanical systems and product solutions that delight consumers and perform brilliantly. What You'll Be Doing Developing and shaping new product concepts and technologies for future Ninja launches. Designing components, assemblies, and mechanisms that meet functional, cost, and manufacturing requirements. Taking ownership of product elements from concept, CAD modelling, and prototyping through to testing and validation. Conducting design studies to solve real technical and consumer problems. Applying solid engineering fundamentals to ensure designs are robust, reliable, and ready for mass production. Building and testing prototypes, analyzing results, and iterating quickly. Working closely with global cross-functional teams to ensure design intent is protected through tool release and manufacturing. Participating in design reviews - contributing ideas, insights, and solutions. Continuously improving performance, quality, and overall consumer value. Supporting and collaborating with senior engineers, contributing to a strong, hands-on, problem-solving culture. What You'll Bring Degree in Product Design Engineering , Mechanical Engineering , or Industrial Design Engineering . Typically 2-4 years' experience in mechanical or product design. Experience in consumer goods or household appliances is highly desirable. Strong understanding of plastics and manufacturing processes . A track record of contributing to products that have launched in market. High proficiency in SolidWorks or Creo . Hands-on prototyping and problem-solving mindset. Excellent communication and collaborative working style. Positive, curious, and proactive approach to challenges. An appreciation for electronics, software, or UX is beneficial, but not essential. Our Culture At SharkNinja, we don't just raise the bar-we push past it every single day. Our Outrageously Extraordinary mindset drives us to tackle the impossible, push boundaries, and deliver results that others only dream of. If you thrive on breaking out of your swim lane, you'll be right at home. What We Offer We offer competitive health insurance, retirement plans, paid time off, employee stock purchase options, wellness programs, SharkNinja product discounts, and more. We empower your personal and professional growth with high impact Learning Programs featuring bold voices redefining what's possible. When you join, you're not just part of a company-you're part of an outrageously extraordinary community. To gether, we won't just launch products- we'll disrupt entire markets. At SharkNinja, Diversity, Equity, and Inclusion are vital to our global success. Valuing each unique voice and blending all of our diverse skills strengthens SharkNinja's innovation every day. We support ALL associates in bringing their authentic selves to work, making an impact, and having the opportunity for career acceleration. With help from our leadership, associates, and our community, we aim to have equity be a key component of the SharkNinja DNA. Learn more about us: Life At SharkNinja Outrageously Extraordinary SharkNinja Candidate Privacy Notice For candidates based in all regions , please refer to this Candidate Privacy Notice . For candidates based in China , please refer to this Candidate Privacy Notice . For candidates based in Vietnam , please refer to this Candidate Privacy Notice . We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability, or any other class protected by legislation, and local law. SharkNinja will consider reasonable accommodations consistent with legislation, and local law. If you require a reasonable accommodation to participate in the job application or interview process, please contact SharkNinja People & Culture at
Fendt-Krone Agricultural Technician Location : Llanwrda, Carmarthenshire Job Type : Full-time, Permanent Arwel's Agri Services is a leading agricultural machinery dealer in West Wales covering Ceredigion ,Carmarthenshire and the Pembrokeshire regions, representing world-class brands including Fendt and Krone. We are seeking an experienced and motivated Agricultural Technician to join our dedicated workshop team. You will be responsible for the servicing, maintenance, and repair of a diverse range of high-tech agricultural machinery, including Fendt tractors and Krone forage and baling equipment. Key responsibilities Diagnostics and repair: Perform advanced diagnostics, servicing, and repairs on Fendt and Krone machinery, including tractors, combines, balers, and forage harvesters. Mechanical and electrical work: Troubleshoot and fix complex mechanical, electrical, and hydraulic faults using specialized equipment and manufacturer software. Routine maintenance: Conduct routine inspections and preventative maintenance to ensure optimal machine performance. Pre-delivery inspections (PDI): Assemble and perform PDI on new machinery before it is delivered to customers. Field service: Travel to customer sites for on-farm service and repairs, particularly during peak seasons. Customer support: Provide professional and knowledgeable technical support to customers. Training and development: Stay up-to-date with product advancements and technological innovations by attending manufacturer-specific training sessions. Record-keeping: Maintain accurate and detailed records of all work performed. Skills and qualifications Proven experience as an Agricultural Technician or Service Engineer, with specific knowledge of Fendt and Krone equipment preferred but not essential as full manufacturers training will be provided. Strong technical knowledge of mechanical, electrical, and hydraulic systems. Excellent diagnostic and problem-solving skills. Ability to work independently and manage your own workload effectively. A professional and flexible approach, with the willingness to work extended hours during peak seasons. Strong communication and customer service skills. A full UK driving license is essential. What we offer A very competitive salary based on experience. Comprehensive manufacturer-specific training to further your career. Opportunity to work with cutting-edge, high-tech agricultural machinery. A supportive and rewarding team environment. Company Pension / Company vehicle for field service. How to apply: If you have a passion for agricultural machinery and the skills to succeed in this role, please send your CV and a covering letter to You can also apply for this role by clicking the Apply Button.
Oct 31, 2025
Full time
Fendt-Krone Agricultural Technician Location : Llanwrda, Carmarthenshire Job Type : Full-time, Permanent Arwel's Agri Services is a leading agricultural machinery dealer in West Wales covering Ceredigion ,Carmarthenshire and the Pembrokeshire regions, representing world-class brands including Fendt and Krone. We are seeking an experienced and motivated Agricultural Technician to join our dedicated workshop team. You will be responsible for the servicing, maintenance, and repair of a diverse range of high-tech agricultural machinery, including Fendt tractors and Krone forage and baling equipment. Key responsibilities Diagnostics and repair: Perform advanced diagnostics, servicing, and repairs on Fendt and Krone machinery, including tractors, combines, balers, and forage harvesters. Mechanical and electrical work: Troubleshoot and fix complex mechanical, electrical, and hydraulic faults using specialized equipment and manufacturer software. Routine maintenance: Conduct routine inspections and preventative maintenance to ensure optimal machine performance. Pre-delivery inspections (PDI): Assemble and perform PDI on new machinery before it is delivered to customers. Field service: Travel to customer sites for on-farm service and repairs, particularly during peak seasons. Customer support: Provide professional and knowledgeable technical support to customers. Training and development: Stay up-to-date with product advancements and technological innovations by attending manufacturer-specific training sessions. Record-keeping: Maintain accurate and detailed records of all work performed. Skills and qualifications Proven experience as an Agricultural Technician or Service Engineer, with specific knowledge of Fendt and Krone equipment preferred but not essential as full manufacturers training will be provided. Strong technical knowledge of mechanical, electrical, and hydraulic systems. Excellent diagnostic and problem-solving skills. Ability to work independently and manage your own workload effectively. A professional and flexible approach, with the willingness to work extended hours during peak seasons. Strong communication and customer service skills. A full UK driving license is essential. What we offer A very competitive salary based on experience. Comprehensive manufacturer-specific training to further your career. Opportunity to work with cutting-edge, high-tech agricultural machinery. A supportive and rewarding team environment. Company Pension / Company vehicle for field service. How to apply: If you have a passion for agricultural machinery and the skills to succeed in this role, please send your CV and a covering letter to You can also apply for this role by clicking the Apply Button.
About Tetra Tech: Tetra Tech is a leading technical, engineering, and environmental consultancy. We provide data-driven, market-leading water, environment, infrastructure, energy, and international development solutions to clients in the UK and Europe. We deliver locally and we're backed globally. In the UK and Europe, Tetra Tech has more than 6,000 employees and more than 50 offices. Our unique organisational structure enables us to be nimble and respond with the agility of a small business, backed by international resources and capabilities from across Australia, Asia, the Middle East, and North and South America. Role Overview Tetra Tech is seeking an experienced Water risk assessor who wants to branch into the world of M&E Asset Surveying to join our Asset Management team. This role involves conducting detailed surveys and assessments of mechanical and electrical assets across various client sites across the UK with regular travel required. As a member of the Asset Management team, you will to be a proactive team member within the team. And Undertake survey work as directed by Service Lead or Lead Consultant. Working collaboratively with other people across the other teams of Asset Management to present a seamless approach to clients. Ensure the delivery of a professional and exceptional service to clients. How will you be the change? We believe every role is essential to providing that peace of mind for our client- whatever part of the business you're in. Because every role plays a part in driving us further. And everyone can be the change. That's how deliver value for our clients and building systems that lead the way. Key Responsibilities: Knowledge and practical experience in conducting water risk assessments, including legionella risk assessment. And be able to identify potential water system hazards within MEP assets and recommend appropriate risk mitigation measures. Experience preparing detailed water risk assessment reports and liaising with maintenance and compliance teams to implement corrective actions. Perform comprehensive on-site surveys of mechanical and electrical building services assets including HVAC, electrical systems, fire protection, plumbing, and lifts. Accurately record asset condition, specifications, and lifecycle data using digital tools and asset management software. Support the maintenance of detailed asset registers and assist in data analysis to inform asset lifecycle and maintenance planning. Provide technical insight and produce clear, concise survey reports with recommendations. Collaborate closely with engineering, facilities management, and client teams to ensure asset data accuracy and compliance. Assist in budget forecasting and asset replacement planning. Comply fully with health, safety, and security protocols, including preparing for and maintaining SC clearance. Stay informed on industry best practices and technological advances in M&E systems and asset management. Qualifications & Experience: Conduct in-depth water safety evaluations in accordance with UK guidelines such as ACOP L8, HSG 274, and HTM/SHTM standards. Conduct risk assessment visits, accurately recording all relevant data to produce detailed risk assessments. Provide expert advice to clients, recommending necessary remedial actions Knowledge of mechanical and electrical building systems. Experience with asset management software and digital survey tools. Thorough understanding of relevant regulations, standards, and compliance requirements. Strong attention to detail, analytical skills, and excellent written communication. Willingness and ability to travel regularly across the UK, including London, Leeds, and other client sites, with some international travel and overnight stays as required Proven experience as an M&E surveyor or in a similar role within asset management or building services engineering, with up to 3 years of direct experience. Reasonable knowledge of the MEP/building surveying market. Proficient in IT to ensure timely delivery of reports and other deliverables. Deliver professional and exceptional service to clients. High degree of self-direction, assertiveness, and eagerness to learn. Eligible and willing to undergo DBS (CRB) and SC checks if required. At least 3 years of hands-on experience in water safety and risk assessment. Solid understanding of UK water hygiene regulations. Exceptional communication, organization, and report-writing skills. Valid driver's license. Desirable Hold City and Guilds or Water Management Society qualifications in legionella control and risk assessment of domestic water systems. Possess a strong background in building services engineering, either as a tradesperson or through an M&E design career, with excellent knowledge of engineering plant, equipment, and relevant building services standards Experience within a similar role, preferably within an outsourced building services or facilities/asset management role Knowledge of asset management principles. Change control experience within projects Building strong working relationships with other stakeholders whilst ensuring that the best interests of the projects are promoted and maintained. Experience with web based (database) software platforms. Our People Our people are at the heart of everything we do! They help our clients succeed, our business prosper and the communities we work in thrive. We need the very best people to maintain our position as a market leader and so provide a collaborative environment that supports individual performance, innovation, and creativity. Our Way of Working We take pride in delivering projects effectively for clients. This often requires colleagues to be together- in offices or on site - to ensure the best outcomes. However, when possible, we also advocate for flexibility around how, when, and where you work. There is no 'one approach fits all' - each team manages their own way of working, we trust our employees and focus on outputs not inputs. Meeting up with colleague and clients face to face in office environments or on site is important for collaboration, face-to-face meetings, appraisals and development. At Tetra Tech, we want everyone to feel like they truly belong. Our goal is to create a workplace where every person is valued and respected for who they are. Everyone is welcome at Tetra Tech. Opportunities and success should only be determined by attitude, capability and collaborative spirit. Be yourself, without apology. Making everybody feel welcome at Tetra Tech is important to us - because everybody is welcome! We are working hard to be a business where people can not only be themselves but can celebrate who they are and what they bring to our organisation. If you have a disability, learning difficulty, medical condition or any other individual need, we'd be happy to talk to you about making reasonable adjustments to our application and selection process that will enable you to be your best. We offer a competitive salary, contributory pension, healthcare cover and a range of flexible benefits. We are open to discussing the possibility of reduced hours, remote working, term time only, flexible start and finish times and compressed hours. We can offer a range of solutions to help you to get the most out of your work / life balance. We offer volunteer days, birthday holiday and a range of flexible benefits to suit each individual. For more information on our company, please visit our website at . To apply, please visit our careers section where you will be able to submit your CV and a covering letter We thank all applicants for their interest; however only those selected for an interview will be contacted. Additional Information Organization: 784 TCE Requisition
Oct 31, 2025
Full time
About Tetra Tech: Tetra Tech is a leading technical, engineering, and environmental consultancy. We provide data-driven, market-leading water, environment, infrastructure, energy, and international development solutions to clients in the UK and Europe. We deliver locally and we're backed globally. In the UK and Europe, Tetra Tech has more than 6,000 employees and more than 50 offices. Our unique organisational structure enables us to be nimble and respond with the agility of a small business, backed by international resources and capabilities from across Australia, Asia, the Middle East, and North and South America. Role Overview Tetra Tech is seeking an experienced Water risk assessor who wants to branch into the world of M&E Asset Surveying to join our Asset Management team. This role involves conducting detailed surveys and assessments of mechanical and electrical assets across various client sites across the UK with regular travel required. As a member of the Asset Management team, you will to be a proactive team member within the team. And Undertake survey work as directed by Service Lead or Lead Consultant. Working collaboratively with other people across the other teams of Asset Management to present a seamless approach to clients. Ensure the delivery of a professional and exceptional service to clients. How will you be the change? We believe every role is essential to providing that peace of mind for our client- whatever part of the business you're in. Because every role plays a part in driving us further. And everyone can be the change. That's how deliver value for our clients and building systems that lead the way. Key Responsibilities: Knowledge and practical experience in conducting water risk assessments, including legionella risk assessment. And be able to identify potential water system hazards within MEP assets and recommend appropriate risk mitigation measures. Experience preparing detailed water risk assessment reports and liaising with maintenance and compliance teams to implement corrective actions. Perform comprehensive on-site surveys of mechanical and electrical building services assets including HVAC, electrical systems, fire protection, plumbing, and lifts. Accurately record asset condition, specifications, and lifecycle data using digital tools and asset management software. Support the maintenance of detailed asset registers and assist in data analysis to inform asset lifecycle and maintenance planning. Provide technical insight and produce clear, concise survey reports with recommendations. Collaborate closely with engineering, facilities management, and client teams to ensure asset data accuracy and compliance. Assist in budget forecasting and asset replacement planning. Comply fully with health, safety, and security protocols, including preparing for and maintaining SC clearance. Stay informed on industry best practices and technological advances in M&E systems and asset management. Qualifications & Experience: Conduct in-depth water safety evaluations in accordance with UK guidelines such as ACOP L8, HSG 274, and HTM/SHTM standards. Conduct risk assessment visits, accurately recording all relevant data to produce detailed risk assessments. Provide expert advice to clients, recommending necessary remedial actions Knowledge of mechanical and electrical building systems. Experience with asset management software and digital survey tools. Thorough understanding of relevant regulations, standards, and compliance requirements. Strong attention to detail, analytical skills, and excellent written communication. Willingness and ability to travel regularly across the UK, including London, Leeds, and other client sites, with some international travel and overnight stays as required Proven experience as an M&E surveyor or in a similar role within asset management or building services engineering, with up to 3 years of direct experience. Reasonable knowledge of the MEP/building surveying market. Proficient in IT to ensure timely delivery of reports and other deliverables. Deliver professional and exceptional service to clients. High degree of self-direction, assertiveness, and eagerness to learn. Eligible and willing to undergo DBS (CRB) and SC checks if required. At least 3 years of hands-on experience in water safety and risk assessment. Solid understanding of UK water hygiene regulations. Exceptional communication, organization, and report-writing skills. Valid driver's license. Desirable Hold City and Guilds or Water Management Society qualifications in legionella control and risk assessment of domestic water systems. Possess a strong background in building services engineering, either as a tradesperson or through an M&E design career, with excellent knowledge of engineering plant, equipment, and relevant building services standards Experience within a similar role, preferably within an outsourced building services or facilities/asset management role Knowledge of asset management principles. Change control experience within projects Building strong working relationships with other stakeholders whilst ensuring that the best interests of the projects are promoted and maintained. Experience with web based (database) software platforms. Our People Our people are at the heart of everything we do! They help our clients succeed, our business prosper and the communities we work in thrive. We need the very best people to maintain our position as a market leader and so provide a collaborative environment that supports individual performance, innovation, and creativity. Our Way of Working We take pride in delivering projects effectively for clients. This often requires colleagues to be together- in offices or on site - to ensure the best outcomes. However, when possible, we also advocate for flexibility around how, when, and where you work. There is no 'one approach fits all' - each team manages their own way of working, we trust our employees and focus on outputs not inputs. Meeting up with colleague and clients face to face in office environments or on site is important for collaboration, face-to-face meetings, appraisals and development. At Tetra Tech, we want everyone to feel like they truly belong. Our goal is to create a workplace where every person is valued and respected for who they are. Everyone is welcome at Tetra Tech. Opportunities and success should only be determined by attitude, capability and collaborative spirit. Be yourself, without apology. Making everybody feel welcome at Tetra Tech is important to us - because everybody is welcome! We are working hard to be a business where people can not only be themselves but can celebrate who they are and what they bring to our organisation. If you have a disability, learning difficulty, medical condition or any other individual need, we'd be happy to talk to you about making reasonable adjustments to our application and selection process that will enable you to be your best. We offer a competitive salary, contributory pension, healthcare cover and a range of flexible benefits. We are open to discussing the possibility of reduced hours, remote working, term time only, flexible start and finish times and compressed hours. We can offer a range of solutions to help you to get the most out of your work / life balance. We offer volunteer days, birthday holiday and a range of flexible benefits to suit each individual. For more information on our company, please visit our website at . To apply, please visit our careers section where you will be able to submit your CV and a covering letter We thank all applicants for their interest; however only those selected for an interview will be contacted. Additional Information Organization: 784 TCE Requisition
Independent Forgings and Alloys
Sheffield, Yorkshire
Independent Forgings and Alloys Ltd (IFA) are continuing to invest and grow, and we are looking to add to our Engineering team. We are now looking for an experienced Mechanical Engineer. Over the last few years, we have invested in the business and have successfully doubled our turnover. We are looking to continue this growth and are looking to for the right people to help us join our team. The role is working on a rotating 3 shift pattern Monday - Friday with overtime available Main duties: Planned Preventative Maintenance tasks. Installation of new plant. Planning mechanical maintenance tasks for completion during the shutdown. Development and upgrading of existing equipment. Good knowledge of safety and permit to work systems. More about you: We would like you to be an apprentice trained maintenance engineer who is mechanically bias. You must have experience in a heavy forge environment coupled with good working knowledge of hydraulics (ideally Oilgear Towler) and great mobile plant maintenance skills (manipulator, FLT and OHC). Experience of break downs on presses, hammers, lathes and borers would also be beneficial, however not essential. More about IFA: We manufacture high-integrity, open-die and closed-die forged components in nickel alloy, titanium, stainless steel and carbon alloys for customers and tier-one suppliers within the aerospace, nuclear, power generation, marine as well as oil and gas sector. We are unique due to the combination of open and closed-die forging while also undertaking the whole production process from raw material to the finished product in one location. We offer you: Competitive pay. Job security. Holidays - you will have 33 days holiday, including bank holidays. Pension scheme - IFA wants to provide its employees a good foundation for the life after work and hence offers a 5% contribution. The pension scheme comes along with further discounts on health, travel and rescue insurances. Bonus scheme - this is linked to team and company performance. Westfield cash plan - IFA provides level 1 health cash plan which comes along with numerous discounts and special offers, including gym discounts, online, high street and grocery retailers and many more. Death in service payment, full company sick pay and long service rewards. Tax efficiency schemes including the Cycle to Work. Gympass membership - access to a national selection of gyms and swimming pools Free work wear and PPE. On-site parking is available. Development - we offer genuine development opportunities to progress your career. Training options to develop skills. Please refer to the job description upon submitting your application.
Oct 31, 2025
Full time
Independent Forgings and Alloys Ltd (IFA) are continuing to invest and grow, and we are looking to add to our Engineering team. We are now looking for an experienced Mechanical Engineer. Over the last few years, we have invested in the business and have successfully doubled our turnover. We are looking to continue this growth and are looking to for the right people to help us join our team. The role is working on a rotating 3 shift pattern Monday - Friday with overtime available Main duties: Planned Preventative Maintenance tasks. Installation of new plant. Planning mechanical maintenance tasks for completion during the shutdown. Development and upgrading of existing equipment. Good knowledge of safety and permit to work systems. More about you: We would like you to be an apprentice trained maintenance engineer who is mechanically bias. You must have experience in a heavy forge environment coupled with good working knowledge of hydraulics (ideally Oilgear Towler) and great mobile plant maintenance skills (manipulator, FLT and OHC). Experience of break downs on presses, hammers, lathes and borers would also be beneficial, however not essential. More about IFA: We manufacture high-integrity, open-die and closed-die forged components in nickel alloy, titanium, stainless steel and carbon alloys for customers and tier-one suppliers within the aerospace, nuclear, power generation, marine as well as oil and gas sector. We are unique due to the combination of open and closed-die forging while also undertaking the whole production process from raw material to the finished product in one location. We offer you: Competitive pay. Job security. Holidays - you will have 33 days holiday, including bank holidays. Pension scheme - IFA wants to provide its employees a good foundation for the life after work and hence offers a 5% contribution. The pension scheme comes along with further discounts on health, travel and rescue insurances. Bonus scheme - this is linked to team and company performance. Westfield cash plan - IFA provides level 1 health cash plan which comes along with numerous discounts and special offers, including gym discounts, online, high street and grocery retailers and many more. Death in service payment, full company sick pay and long service rewards. Tax efficiency schemes including the Cycle to Work. Gympass membership - access to a national selection of gyms and swimming pools Free work wear and PPE. On-site parking is available. Development - we offer genuine development opportunities to progress your career. Training options to develop skills. Please refer to the job description upon submitting your application.
