6 jobs found

Building Fabric Engineer Commercial Environments Permanent Role Weekly Pay 38-40K Base 50-65K OTE. We are currently recruiting for a Building Fabric Engineer / Fabric Maintenance Engineer to carry out a wide range of reactive building fabric based works in the London region. As the Building Fabric Engineer, you will attend commercial properties, carrying out predominately remedial and reactive call out works including carpentry, plumbing and general building / maintenance works. As the Building Fabric Engineer, your duties may consist of: Carpentry: hanging doors, shaving down doors, ironmongery (latches, door handles, hinges etc), door shutters / closers, removing and replacement locks, plaster boarding, boarding up hazardous areas, erecting wooden frames/structures, boxing in, fixtures and fittings, assembling furniture, fitting / replacing ceiling tiles, patch work and laying wooden flooring / floor tiles etc. Plumbing: Basic PVC pipework, repairs and installation of taps, washers, flushers, toilet seats etc. Replacing water heaters. Patch tiling - walls and flooring. Patch grouting. Painting and decorating. Patch roofing - internal leak detection, leak repair etc. Employment Package: Role: Building Fabric Engineer / Fabric Maintenance Engineer Status: Permanent, PAYE - Paid Weekly Base Salary: 38,000 - 40,000 Estimated annual earnings: 50,000 - 65,000 Provided: Company van, fuel card, pension, 29 days paid annual leave, uniform, phone, relevant courses/training etc. Paid overtime: x1.5 rate until midnight / x2 rate overnight or all day Sundays. Call out rota: 1 in 4 weeks. 80 per call out + overtime pay after 3 hours including travel time. Environments: Commercial - restaurants, pubs, coffee shops, retail stores, gyms etc. Location: Dependant on location that you live - within maximum of 90 minute radius, ie: Central London, Greater London and parts of the closest county to your home address. Requirements: Must be multi skilled, capable of carrying out majority of the duties listed above independantly. Trade qualification or "time served" experience accepted. Experience working within commercial environments is highly benefitical. Must have a UK driving license with 9 points or under. If you are an experienced Building Fabric Engineer / Fabric Maintenance Engineer and would be interested in discussing this opportunity further, then please apply today by submitting a CV.

Job Title: Electrical and Multi- Skilled Technician Location: Royston, UK & Enfield, North London (site based) 1 Multi Skilled Technician (M&E)- Day shift, Monday- Friday - Salary: £45,589 plus free lunch, discretionary bonus and benefits 2 Electrical Engineer's - 24/7 shift - Salary £ 44,113.00 + 35% shift allowance + lunch allowance = £60,345.05 1 Instrument Technician - 24/7 shift - Salary £43,765.00 % shift allowance + lunch allowance = £59,875.25 World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Electrical Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. Here at JM, we are hiring Electrical, Instrument and Multi skilled Technician's to join our PGMS business. Platinum Group Metal Services (PGMS) is one of four businesses within the Efficient Natural Resources Sector that manages, distributes, refines and recycles precious metals and fabricates products using precious metals and related materials. The business unit also manufactures platinum group metals, minor metal compounds, organometallics and fine metal powders for high technology applications, as well as providing a range of management services for platinum group metals. The role: As an Electrical Technician, you will help drive our goals by: Safety should always be the highest priority for any tasks undertaken, in conjunction with our life saving policies and procedures Use of technical drawings & operator manuals alongside electrical schematic drawings & P&ID's to aid fault diagnosis process Reduce Plant downtime by proposing/implementing improvements in both the Electrical and instrumentation facets of the role Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with and keep accurate written records of work carried out using SAP CMMS system Work alongside compliance & technical author to support the technical review of written maintenance documents and operational procedures Conducting Inspections, testing, calibration, adjustments and monitoring tasks as required to maintain efficient plant and build-in equipment reliability Key skills that will help you succeed in this role: An industrial Electrical and Instrumentation -based qualification to HNC/ONC level or equivalent Time served Apprenticeship with a further 5 years' experience Previous Manufacturing/Chemical industry experience Experience of structured problem-solving techniques, fault diagnosis What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.

Electrical Maintenance Engineer Salary: Up to £58,000 DOE + Overtime Available Shifts: 2 Days, 2 Nights (12-hour shifts) Holidays: 7 Weeks Benefits: Company pension, sick pay, company vehicle, and more Are you a hands-on, electrically biased Maintenance Engineer looking for a long-term opportunity in a high-paced, technically challenging environment? We are currently recruiting for a skilled and motivated Electrical Maintenance Engineer to join a well-established and highly respected engineering team. This is an exciting opportunity to join a business where engineers are valued, and many have stayed for over 30 years. Key Responsibilities: Electrical maintenance on complex 3-phase and low-voltage process and production equipment Working with motors, inverters, DC drives, PLCs, and IT-based control systems PLC fault-finding (Siemens/Allen Bradley or similar) Supporting automated systems including AGVs, conveyors, palletisers, cranes, compressors, chillers, and AHUs Carrying out planned and reactive maintenance to ensure minimal downtime Participating in a rotating shift pattern (2 days, 2 nights) What We re Looking For: Time-served, apprentice-trained engineer (minimum Level 3 qualification) Strong electrical bias (up to 90/10 split), but ideally multi-skilled Hands-on, proactive approach to maintenance in a fast-paced setting Experience with HV networks is advantageous but not essential Excellent fault-finding, problem-solving, and troubleshooting skills Why Join Us? Competitive salary and generous holiday allowance Opportunity for overtime Long-term stability we invest in our engineers and promote longevity Supportive team environment with access to further training and development

Field Service Engineer Hertford and surrounding area £40k + car / allowance + call out rota up to £7,500 + genuinelye exceptional benefits Our globally renowned and respected client has been established for 60 years and specialise in the design, manufacture and support of bespoke in vitro diagnostic solutions for supply throughout the world. As a result of continued success and an ongoing programme of strategic growth, they are now seeking to recruit an experienced and self-motivated multi skilled Field Service Engineer to complement their professional team and provide the highest levels of technical customer service and satisfaction in the Installation, Service, Repair and Technical Support of a range of automated laboratory equipment associated with Clinical and Industrial markets in the Hertfordshire region of the UK. Once trained on the portfolio of solutions, the successful Field Service Engineer candidate will undertake a range of Installation, Planned Preventative Service, Reactive Repair and Technical Support activities in various customer-facing environments that will include hospitals and laboratories through to household name blue chip FMCG clients, managing your vehicle stock inventory efficiently and within guidelines, and ensuring activities are completed on time and to the highest levels of accuracy with supporting documentation completed and submitted in accordance with the engineering and service department requirements. In addition to the initial in-house training provided, you will also be required to attend training courses wherever they may be delivered in order to both gain or maintain your knowledge levels and to ensure customers and stakeholders consistently receive the highest levels of service and support, and you will also keep an eye on developments in the industry to keep up to date with advancements in technology. Other duties will include (but not be limited to) assisting with project work when required in order to ensure deadlines are achieved and providing customer on-call support as part of the Service Team rota. You will understand and ensure compliance with all relevant company policies and applicable industry regulations and legislation (including Health & Safety at Work) at all times and ensure that you and those around you follow SSOW on site. To be considered for this varied and challenging Field Service Engineer role within a unique market leading environment across the Hertford region, you will essentially hold a full UK driving licence and realistically be qualified to at least ONC level or above in a relevant Electrical / Electronic Engineering discipline, demonstrating 3 or more years' experience gained in a comparable service or maintenance environment (with laboratory or medical equipment experience proving distinctly advantageous) and able to demonstrate excellent communication and customer service skills at all levels. Contact the Service Team at Premier Technical Recruitment on or email your cv in confidence to for further details.

MERITUS are working with one of Europe's leading defence manufacturers for the recruitment of a Maintenance Engineer to join their Stevenage site on a 12 Month contract basis. The role is full time on site paying 40 per hour via umbrella, and requires the incumbent of the position to be a sole UK National as the customer would look to start a security clearance. Overview of Department: We are seeking a Maintenance Engineer to join the Calibration & Maintenance Team. This role will involve supporting day-to-day operations, conducting repairs on process equipment and environmental stress screening facilities, and working from drawings, circuit diagrams, schematics, and user manuals. A strong understanding of Planned Preventative Maintenance (PPM) is essential. The position offers varied, challenging, and interesting work in a fast-paced environment. Responsibilities Provide day-to-day support to operations teams. Conduct repairs on process equipment and environmental stress screening facilities. Use technical documentation (drawings, schematics, manuals) to provide guidance and carry out repairs. Apply knowledge of PPM to maintain equipment effectively. Perform accurate fault finding and repairs down to component level. Support continuous improvement and technical troubleshooting across the team. Mentor junior staff when requested by the line manager. Skills & Experience Required Minimum qualification: HNC in a relevant engineering subject. Proven experience in fault finding to component level. Ability to interpret and use instructions, handbooks, drawings, and specifications. Strong understanding and experience of Planned Preventative Maintenance (PPM). Skilled in taking precise measurements down to component level. Experience working on manufacturing process equipment (experience with CCA manufacture desirable). Familiarity with vibration shakers and environmental chambers (desirable). Strong analytical and problem-solving skills with the ability to manage multiple priorities. Experience mentoring junior staff. Working knowledge of SAP (desirable).

Multi-Skilled Maintenance Engineer Location: Sovereign Park, Luton (with travel to Walthamstow 1-2 days/week) Salary: Competitive + Benefits Contract: Full-Time, Permanent Our client is pioneering the next generation of thermal and electrical insulation solutions - and we've just launched a state-of-the-art facility in Luton focused on cutting-edge battery module components. This is a unique opportunity to join us at a pivotal moment, where your skills will directly influence the development of our processes, the commissioning of new equipment and the performance of our high-tech production line. The Role As a Multi-Skilled Maintenance Engineer , you'll be a key player across both our new Luton site and our clients established Walthamstow facility. This is a hands-on, problem-solving role that blends maintenance expertise with process innovation. Your responsibilities will include: Leading process improvements and applying TPM (Total Productive Maintenance) principles Managing planned maintenance and responding swiftly to breakdowns Diagnosing and repairing electrical and mechanical faults (400V AC to 5V DC systems) Working with pneumatics, analogue controls, motors, inverters, and PLCs Installing, commissioning, and upgrading manufacturing machinery Upholding health and safety standards in the workshop Essential Skills & Experience: City & Guilds, HND or equivalent in electrical/mechanical engineering Solid background in both electrical and mechanical maintenance Confident working with systems from 400V AC to 5V DC Experience with pneumatics, motors, inverters, PLCs, and analogue controls Ability to read and interpret technical documentation and schematics Familiarity with TPM principles Desirable: Experience mentoring or leading junior staff Proficiency in Microsoft Office (Excel, Word, Outlook) Skilled in manufacturing fixtures, jigs, and fittings Strong communication skills If interested simply apply with an updated CV and we will be in touch shortly!