MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions Overview: First Military Recruitment is proudly working in partnership with a fantastic International Defence business who are looking to recruit multiple Weapons Trainers on a permanent basis due to growth based at their Lyneham depot. Duties and Responsibilities: Your role will entail the training of highly motivated students in all aspects of the trade, stripping and assembling, fault finding & repairs on most of the current in-service weapon systems. Within this role, you will be working as part of a highly motivated team, in a job that offers the highest level of job satisfaction along with an excellent work life balance. To prepare relevant training material, if necessary involving Media and Graphics Department input to provide relevant Weapons Training and maintain personal Course Training Plans (CPD) portfolio in respect of new technologies and equipment ensuring that lesson plans are training sessions are developed in accordance of the approved Course Training Plans (CTP). Ensuring student development through monitoring, feedback appraisal, discipline and training interventions, ensuring all supporting documentation is maintained and that any special student developmental needs or training delays are flagged to the Lead Trainer (LT). Delivery of remedial training and revision as necessary. Assessment of trainees to include: Creation of written examination and progress test papers, Creation of practical assessment/examination scenario and continuous assessments. Invigilation of examination and assessments. Successful candidate will work within the existing training team delivering high quality military apprentice training. Responsibility within the Trade Training areas for cleanliness, security, Health, Safety and Welfare (HSW), Control of Substances Hazardous to Health (COSHH) and environmental and engineering hygiene, ensuring that all students are fully aware of these requirements. Supervision of Students and Visitors to ensure full compliance with relevant H&S & PPE requirements and as relevant to the equipment training department, ensuring risks are adequately assessed and minimised. Ensuring that the correct equipment is used for each task. To ensure that procedures are understood and implemented in the course of carrying out any work tasks. Full training provided culminating in a Level 4 qualification (CET) Skills and Qualifications: An Armourer or Multi skilled mechanical engineer with high level of experience who would relish the challenge of a new job role. Engineering teaching experience in further education Minimum CGLI City & Guilds part 3 or above, NVQ Level 3 or equivalent military qualification. Minimum 5 years experience in engineering Have good craft/technical skills PC literate with Powerpoint and Word You must hold or have ability to obtain Baseline Personnel Security Standard (BPSS) security clearance MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions
Dec 08, 2025
Full time
MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions Overview: First Military Recruitment is proudly working in partnership with a fantastic International Defence business who are looking to recruit multiple Weapons Trainers on a permanent basis due to growth based at their Lyneham depot. Duties and Responsibilities: Your role will entail the training of highly motivated students in all aspects of the trade, stripping and assembling, fault finding & repairs on most of the current in-service weapon systems. Within this role, you will be working as part of a highly motivated team, in a job that offers the highest level of job satisfaction along with an excellent work life balance. To prepare relevant training material, if necessary involving Media and Graphics Department input to provide relevant Weapons Training and maintain personal Course Training Plans (CPD) portfolio in respect of new technologies and equipment ensuring that lesson plans are training sessions are developed in accordance of the approved Course Training Plans (CTP). Ensuring student development through monitoring, feedback appraisal, discipline and training interventions, ensuring all supporting documentation is maintained and that any special student developmental needs or training delays are flagged to the Lead Trainer (LT). Delivery of remedial training and revision as necessary. Assessment of trainees to include: Creation of written examination and progress test papers, Creation of practical assessment/examination scenario and continuous assessments. Invigilation of examination and assessments. Successful candidate will work within the existing training team delivering high quality military apprentice training. Responsibility within the Trade Training areas for cleanliness, security, Health, Safety and Welfare (HSW), Control of Substances Hazardous to Health (COSHH) and environmental and engineering hygiene, ensuring that all students are fully aware of these requirements. Supervision of Students and Visitors to ensure full compliance with relevant H&S & PPE requirements and as relevant to the equipment training department, ensuring risks are adequately assessed and minimised. Ensuring that the correct equipment is used for each task. To ensure that procedures are understood and implemented in the course of carrying out any work tasks. Full training provided culminating in a Level 4 qualification (CET) Skills and Qualifications: An Armourer or Multi skilled mechanical engineer with high level of experience who would relish the challenge of a new job role. Engineering teaching experience in further education Minimum CGLI City & Guilds part 3 or above, NVQ Level 3 or equivalent military qualification. Minimum 5 years experience in engineering Have good craft/technical skills PC literate with Powerpoint and Word You must hold or have ability to obtain Baseline Personnel Security Standard (BPSS) security clearance MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions
We are currently in the market to recruit a Senior Mechanical Design Engineer to join our dynamic and growing Water Consultancy team operating across the UK. You'll work on exciting AMP8 and AMP9 projects, ensuring exceptional water services in a collaborative environment. RPS, Tetra Tech are actively engaged in several long-term wastewater programmes across the UK water industry, helping our clien
Dec 08, 2025
Full time
We are currently in the market to recruit a Senior Mechanical Design Engineer to join our dynamic and growing Water Consultancy team operating across the UK. You'll work on exciting AMP8 and AMP9 projects, ensuring exceptional water services in a collaborative environment. RPS, Tetra Tech are actively engaged in several long-term wastewater programmes across the UK water industry, helping our clien
Role: Toolmaker Location: Cheltenham £40,000 - £42,000 Day Shift 7.45am - 4.45pm (12.30pm finish on Friday) Benefits flexible working and excellent benefits including 27 days holiday allowance (before bank holidays), 3 days' paid volunteering leave, comprehensive private healthcare, enhanced pension plan, life assurance, optional participation in a Share Ownership Plan, free onsite parking. This market leading engineering company are recruiting for a Toolmaker to join their site in Cheltenham. The company manufacture and supply a range of specialist products to various industries across the globe. In this hands-on role, you will be responsible for producing and maintaining tooling and ancillary equipment used in the manufacture, assembly, and testing of our product range. Responsibilities: Manufacturing and maintaining tooling and equipment for company operations globally. Supporting the Operations department on a day-to-day basis with any manufacturing, maintenance or quality issues. Ensuring compliance with Health & Safety regulations at all times. Collaborating with Operations and Process Engineering teams to resolve manufacturing, maintenance, and quality issues. Providing feedback on tooling design and suggesting improvements. Maintaining high standards of quality and ensuring equipment is fit for purpose. Supervising apprentices and supporting departmental KPIs and strategic goals. Actively contributing to projects and continuous improvement initiatives. Requirements: Tool and Fixture manufacture experience Experience in a production environment and familiarity with CNC and conventional manufacturing methods. Strong knowledge of manufacturing engineering principles. For further details, please contact Nick Sollis - or email your cv Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few. Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. JBRP1_UKTJ
Dec 08, 2025
Full time
Role: Toolmaker Location: Cheltenham £40,000 - £42,000 Day Shift 7.45am - 4.45pm (12.30pm finish on Friday) Benefits flexible working and excellent benefits including 27 days holiday allowance (before bank holidays), 3 days' paid volunteering leave, comprehensive private healthcare, enhanced pension plan, life assurance, optional participation in a Share Ownership Plan, free onsite parking. This market leading engineering company are recruiting for a Toolmaker to join their site in Cheltenham. The company manufacture and supply a range of specialist products to various industries across the globe. In this hands-on role, you will be responsible for producing and maintaining tooling and ancillary equipment used in the manufacture, assembly, and testing of our product range. Responsibilities: Manufacturing and maintaining tooling and equipment for company operations globally. Supporting the Operations department on a day-to-day basis with any manufacturing, maintenance or quality issues. Ensuring compliance with Health & Safety regulations at all times. Collaborating with Operations and Process Engineering teams to resolve manufacturing, maintenance, and quality issues. Providing feedback on tooling design and suggesting improvements. Maintaining high standards of quality and ensuring equipment is fit for purpose. Supervising apprentices and supporting departmental KPIs and strategic goals. Actively contributing to projects and continuous improvement initiatives. Requirements: Tool and Fixture manufacture experience Experience in a production environment and familiarity with CNC and conventional manufacturing methods. Strong knowledge of manufacturing engineering principles. For further details, please contact Nick Sollis - or email your cv Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few. Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. JBRP1_UKTJ
Maintenance Technician We have a permanent position for Mechanical and Electrical Maintenance Technician Based in Brownhills - Days - 40 hours per week 45k to 50k per annum - depending on experience - plus overtime available Can be flexible with start/finish time Machine tool Maintenance Technician. Busy machine shop located in Brownhills in the West Midlands. We are looking for an experienced Maintenance Technician to join our engineering team. You will have a broad electrical and mechanical knowledge. You will be happy working in both a proactive and reactive role managing your time to achieve best results for the company. Essential experience for the Maintenance Technician role Understanding of Fanuc, Siemens CNC control systems including 5 Axis milling machines and twin turret lathes. Competent at reading and understanding electrical, hydraulic and other technical documents to research machine issues. Troubleshoot and repair hydraulic, electronic, software, electrical, pneumatic and mechanical systems: Experience with low voltage control and feedback systems. Worked with DC drives Experience with replacing machine linear guides and ball screws. Perform machine levelling and alignment. Desirable experience : Apprentice trained and qualified with at least three years' experience in performing maintenance on CNC machine tools. Experience of horizontal twin spindle, twin pallet milling machines Working with Siemens Simatic HMI. Forklift truck licence Details of the role: 45k to 50k per annum - depending on experience - plus overtime available Days Monday to Friday - 40 hours per week - flexible on working hours Working within the engineering team Based in Brownhills
Dec 08, 2025
Full time
Maintenance Technician We have a permanent position for Mechanical and Electrical Maintenance Technician Based in Brownhills - Days - 40 hours per week 45k to 50k per annum - depending on experience - plus overtime available Can be flexible with start/finish time Machine tool Maintenance Technician. Busy machine shop located in Brownhills in the West Midlands. We are looking for an experienced Maintenance Technician to join our engineering team. You will have a broad electrical and mechanical knowledge. You will be happy working in both a proactive and reactive role managing your time to achieve best results for the company. Essential experience for the Maintenance Technician role Understanding of Fanuc, Siemens CNC control systems including 5 Axis milling machines and twin turret lathes. Competent at reading and understanding electrical, hydraulic and other technical documents to research machine issues. Troubleshoot and repair hydraulic, electronic, software, electrical, pneumatic and mechanical systems: Experience with low voltage control and feedback systems. Worked with DC drives Experience with replacing machine linear guides and ball screws. Perform machine levelling and alignment. Desirable experience : Apprentice trained and qualified with at least three years' experience in performing maintenance on CNC machine tools. Experience of horizontal twin spindle, twin pallet milling machines Working with Siemens Simatic HMI. Forklift truck licence Details of the role: 45k to 50k per annum - depending on experience - plus overtime available Days Monday to Friday - 40 hours per week - flexible on working hours Working within the engineering team Based in Brownhills
Electrical Bias Maintenance Engineer (80/20) Salary: 48,000 - 50,000 Location: S81 7QB Permanent - 2-Week Rostered Days (12-Hour Shifts) We are currently looking an Electrically Biased Maintenance Engineers to join a leading food manufacturing site. This is a fantastic opportunity to become part of a highly automated production facility, supporting ongoing performance, reliability and continuous improvement across the plant. Role Overview You'll play a key role in maintaining and improving machinery performance, responding to breakdowns and delivering planned maintenance. With an 80/20 electrical/mechanical split, this position is ideal for engineers with strong electrical competency and solid mechanical understanding. Shift Pattern Panama Days This pattern provides excellent work-life balance with generous time off built into the rota. What We're Looking For Electrically biased maintenance background (80/20 split) Experience working in a fast-paced industrial/manufacturing environment Ability to fault-find, repair and maintain automated equipment Proactive mindset with a focus on safety, reliability and efficiency HNC/ONC Electrical Engineering What's on Offer Attractive salary of 48,000 - 50,000 Opportunity to join an established and expanding manufacturer Supportive engineering team with excellent development potential If you're a skilled Electrical Maintenance Engineer looking for a fresh challenge in a well-established production environment, we'd love to hear from you. Send your CV for a confidential discussion or call on (phone number removed).
Dec 08, 2025
Full time
Electrical Bias Maintenance Engineer (80/20) Salary: 48,000 - 50,000 Location: S81 7QB Permanent - 2-Week Rostered Days (12-Hour Shifts) We are currently looking an Electrically Biased Maintenance Engineers to join a leading food manufacturing site. This is a fantastic opportunity to become part of a highly automated production facility, supporting ongoing performance, reliability and continuous improvement across the plant. Role Overview You'll play a key role in maintaining and improving machinery performance, responding to breakdowns and delivering planned maintenance. With an 80/20 electrical/mechanical split, this position is ideal for engineers with strong electrical competency and solid mechanical understanding. Shift Pattern Panama Days This pattern provides excellent work-life balance with generous time off built into the rota. What We're Looking For Electrically biased maintenance background (80/20 split) Experience working in a fast-paced industrial/manufacturing environment Ability to fault-find, repair and maintain automated equipment Proactive mindset with a focus on safety, reliability and efficiency HNC/ONC Electrical Engineering What's on Offer Attractive salary of 48,000 - 50,000 Opportunity to join an established and expanding manufacturer Supportive engineering team with excellent development potential If you're a skilled Electrical Maintenance Engineer looking for a fresh challenge in a well-established production environment, we'd love to hear from you. Send your CV for a confidential discussion or call on (phone number removed).
Manufacturing Futures is looking to recruit a Business Development Manager for a well-established manufacturer based in South Yorkshire. Our client work within heavy industry and focus on mechanically engineered solutions. The successful Business Development Manager will have a strong background in either machinery, precision engineering, pressure vessels, heat exchangers, flow control equipment or exotic metals and have the ability to open new doors for the business moving forward. Business Development Manager - Role and Responsibilities - Sales, Mechanical Engineering, Precision Engineering, CNC, Heavy Industry, Metals Negotiating sales and contractual terms of business, using pricing structures to win and maintain profitable long-term accounts. Regularly updating company systems, detailing prospecting work conducted, sales pipeline and outcomes. Where required, travelling to appointments across the UK. Meeting customers face to face virtually. Identification of new market sectors and potential customers, developing and maintaining a targeted sales pipeline to consistently initiate contact and win new business. Producing and presenting tailored quotations and proposals to meet customer needs and profitability targets. Liaising with relevant internal departments, including the product and commercial teams, to obtain information and advice about products, services, and promotions. Using market awareness and product knowledge to provide prospective customers with detailed information and compelling proposals to secure new accounts. Business Development Manager - Skills and Abilities - Sales, Mechanical Engineering, Precision Engineering, CNC, Heavy Industry, Metals Recent proven experience in new business development, or lead generating sales role. Experience within mechanical engineering: Heavy Industry, Precision Engineering, CNC, Fabrication, Metals, Flow Control, etc. Ability to work with and develop business opportunities. Car owner/driver Strong IT skills (i.e., Outlook, Excel, and PowerPoint) Business Development Manager, Sales, Mechanical Engineering, Precision Engineering, CNC, Heavy Industry, Metals If this sounds like you or you are interested to find out more, click apply now!
Dec 07, 2025
Full time
Manufacturing Futures is looking to recruit a Business Development Manager for a well-established manufacturer based in South Yorkshire. Our client work within heavy industry and focus on mechanically engineered solutions. The successful Business Development Manager will have a strong background in either machinery, precision engineering, pressure vessels, heat exchangers, flow control equipment or exotic metals and have the ability to open new doors for the business moving forward. Business Development Manager - Role and Responsibilities - Sales, Mechanical Engineering, Precision Engineering, CNC, Heavy Industry, Metals Negotiating sales and contractual terms of business, using pricing structures to win and maintain profitable long-term accounts. Regularly updating company systems, detailing prospecting work conducted, sales pipeline and outcomes. Where required, travelling to appointments across the UK. Meeting customers face to face virtually. Identification of new market sectors and potential customers, developing and maintaining a targeted sales pipeline to consistently initiate contact and win new business. Producing and presenting tailored quotations and proposals to meet customer needs and profitability targets. Liaising with relevant internal departments, including the product and commercial teams, to obtain information and advice about products, services, and promotions. Using market awareness and product knowledge to provide prospective customers with detailed information and compelling proposals to secure new accounts. Business Development Manager - Skills and Abilities - Sales, Mechanical Engineering, Precision Engineering, CNC, Heavy Industry, Metals Recent proven experience in new business development, or lead generating sales role. Experience within mechanical engineering: Heavy Industry, Precision Engineering, CNC, Fabrication, Metals, Flow Control, etc. Ability to work with and develop business opportunities. Car owner/driver Strong IT skills (i.e., Outlook, Excel, and PowerPoint) Business Development Manager, Sales, Mechanical Engineering, Precision Engineering, CNC, Heavy Industry, Metals If this sounds like you or you are interested to find out more, click apply now!
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Here in Boston we employ around 400 colleagues and produce ready to eat salads, prepared vegetables and snacks for many of the major retailers such as Coop, Boots, Greggs, Costco, Spar and BOL. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Shift pattern: 3's & 2's permanent days What you'll be doing: Complete planned and preventative maintenance on plant and equipment to maximise equipment reliability and performance Ensure the DAF Plant is running to efficiently to ensure optimum efficiency. Ensuring plant equipment, boiler houses, utilities are more are in correct working order. Carry out fault finding, problem solving to establish route causes and identify and implement fixes to address plant or equipment issues Comply with all Greencore health and safety standards, safe systems of work and standard operating procedures in addition to legislative and compliance standards and controls to ensure all work is carried out correctly and safely Complete all necessary documentation in an accurate and timely fashion to ensure that comprehensive reporting and history is maintained and that records are always audit-ready Identify and recommend opportunities for improvements on plant equipment efficiency and effectiveness Support the site maintenance team where required to ensure operational efficiency and effectiveness What we're looking for: Experience in a similar role or experience gained on the job as an engineering apprentice People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Can evidence electrical and / or mechanical skills and ability Evidence experience gained in a manufacturing environment Experience with problem solving and root cause identification, supported by the delivery of sustainable solutions Experience working with others as part of a diverse team Evidence of good communication skills (both written and verbal) Experienced working with computers We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Pension up to 8% matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Dec 07, 2025
Full time
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Here in Boston we employ around 400 colleagues and produce ready to eat salads, prepared vegetables and snacks for many of the major retailers such as Coop, Boots, Greggs, Costco, Spar and BOL. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Shift pattern: 3's & 2's permanent days What you'll be doing: Complete planned and preventative maintenance on plant and equipment to maximise equipment reliability and performance Ensure the DAF Plant is running to efficiently to ensure optimum efficiency. Ensuring plant equipment, boiler houses, utilities are more are in correct working order. Carry out fault finding, problem solving to establish route causes and identify and implement fixes to address plant or equipment issues Comply with all Greencore health and safety standards, safe systems of work and standard operating procedures in addition to legislative and compliance standards and controls to ensure all work is carried out correctly and safely Complete all necessary documentation in an accurate and timely fashion to ensure that comprehensive reporting and history is maintained and that records are always audit-ready Identify and recommend opportunities for improvements on plant equipment efficiency and effectiveness Support the site maintenance team where required to ensure operational efficiency and effectiveness What we're looking for: Experience in a similar role or experience gained on the job as an engineering apprentice People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Can evidence electrical and / or mechanical skills and ability Evidence experience gained in a manufacturing environment Experience with problem solving and root cause identification, supported by the delivery of sustainable solutions Experience working with others as part of a diverse team Evidence of good communication skills (both written and verbal) Experienced working with computers We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Pension up to 8% matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Vehicle Technician/ MOT Tester -Salford Salary Up to £40,000 Basic + 1.5k sign on bonus + Efficiency Bonus + Overtime DOE & Qualifications Days Monday Friday, 8:30am - 5pm, Saturdays on a rota Ref 28861 We have a new job vacancy available for a Vehicle Technician/ MOT Tester in Salford. My client is one of the UK's leading main dealerships in thearea and they're looking for an experienced Vehicle Technician/ MOT Tester wanting to join agreat team! This is a great opportunity for a Vehicle Technician/ MOT Tester looking to work for and alongside one of the best in the industry. If you're a Vehicle Technician/ MOT Tester currently on the lookout then apply now! Vehicle Technician / MOT Tester Benefits: Excellent Bonus Opportunities In house training opportunities for career progression Great pension scheme Company Discounts Vehicle Technician / MOT Tester Role: Carry out servicing and maintenance of all vehicles Electrical, mechanical, and hydraulic fault diagnosis and repair, this work may include warranty approved work in line with our brand parameters Department of Transport (MOT) testing duties (if qualified) Vehicle Technician / MOT Tester Requirements: Full UK driving license NVQ or IMI level 3 ideally but we will also consider level 2 with experience Octane Recruitment Consultant Al-amin Abiru VTNTH Octane Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. Octane Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments. JBRP1_UKTJ
Dec 07, 2025
Full time
Vehicle Technician/ MOT Tester -Salford Salary Up to £40,000 Basic + 1.5k sign on bonus + Efficiency Bonus + Overtime DOE & Qualifications Days Monday Friday, 8:30am - 5pm, Saturdays on a rota Ref 28861 We have a new job vacancy available for a Vehicle Technician/ MOT Tester in Salford. My client is one of the UK's leading main dealerships in thearea and they're looking for an experienced Vehicle Technician/ MOT Tester wanting to join agreat team! This is a great opportunity for a Vehicle Technician/ MOT Tester looking to work for and alongside one of the best in the industry. If you're a Vehicle Technician/ MOT Tester currently on the lookout then apply now! Vehicle Technician / MOT Tester Benefits: Excellent Bonus Opportunities In house training opportunities for career progression Great pension scheme Company Discounts Vehicle Technician / MOT Tester Role: Carry out servicing and maintenance of all vehicles Electrical, mechanical, and hydraulic fault diagnosis and repair, this work may include warranty approved work in line with our brand parameters Department of Transport (MOT) testing duties (if qualified) Vehicle Technician / MOT Tester Requirements: Full UK driving license NVQ or IMI level 3 ideally but we will also consider level 2 with experience Octane Recruitment Consultant Al-amin Abiru VTNTH Octane Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. Octane Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments. JBRP1_UKTJ
An established engineering and refrigeration business is seeking an experienced Product Compliance Engineer on a full-time permanent basis to take ownership of engineering compliance across the organisation. This role is responsible for developing, managing, and maintaining regulatory compliance programmes to ensure all products placed on the market meet UK and international legislative requirements. Working closely with engineering, product development, and project delivery teams, you will review technical documentation, provide regulatory guidance, and support conformity assessment across a diverse product portfolio. Key Responsibilities as Product Compliance Engineer Ensure all products comply with applicable regulations including UKCA and CE marking requirements Maintain and develop internal engineering compliance programmes and procedures Produce, review and manage technical files, Declarations of Conformity and Declarations of Incorporation Work closely with engineering, design and project teams to ensure compliance from concept through delivery Identify, investigate and resolve product non-conformities, implementing corrective actions and engineering changes Research applicable regulatory standards and ensure their ongoing application Develop compliance strategies, risk assessments and standardised documentation templates Maintain the compliance database and regulatory approval records Liaise with customers, suppliers, notified bodies and regulators on product compliance matters Key Skills & Experience as Product Compliance Engineer Engineering degree (Mechanical, Production, Chemical or similar) or equivalent industry experience 510 years post-graduate experience within an engineering compliance or regulatory environment Essential knowledge of pressure systems, pressure vessels and associated legislation Advantageous experience in compressors, pumps or refrigeration systems Strong working knowledge of UKCA / CE marking and related directives including Machinery, Low Voltage, EMC, PED, ATEX and Ecodesign Awareness of PSSR, DSEAR and PUWER requirements is beneficial Ability to interpret mechanical and electrical schematics Proven process improvement and project coordination skills Excellent communication and organisational ability Additional language skills (Spanish, Mandarin or Italian) advantageous but not essential Why Consider ThisProduct Compliance EngineerRole? £48,000 £52,000 salary 25 days annual leave Pension scheme Life assurance Private medical cover Company sickness scheme Ongoing professional development and funded training If you have strong regulatory and engineering compliance experience and are looking to make a meaningful impact within a technically focused business, wed love to hear from you. Apply today to be considered for this exciting opportunity. JBRP1_UKTJ
Dec 07, 2025
Full time
An established engineering and refrigeration business is seeking an experienced Product Compliance Engineer on a full-time permanent basis to take ownership of engineering compliance across the organisation. This role is responsible for developing, managing, and maintaining regulatory compliance programmes to ensure all products placed on the market meet UK and international legislative requirements. Working closely with engineering, product development, and project delivery teams, you will review technical documentation, provide regulatory guidance, and support conformity assessment across a diverse product portfolio. Key Responsibilities as Product Compliance Engineer Ensure all products comply with applicable regulations including UKCA and CE marking requirements Maintain and develop internal engineering compliance programmes and procedures Produce, review and manage technical files, Declarations of Conformity and Declarations of Incorporation Work closely with engineering, design and project teams to ensure compliance from concept through delivery Identify, investigate and resolve product non-conformities, implementing corrective actions and engineering changes Research applicable regulatory standards and ensure their ongoing application Develop compliance strategies, risk assessments and standardised documentation templates Maintain the compliance database and regulatory approval records Liaise with customers, suppliers, notified bodies and regulators on product compliance matters Key Skills & Experience as Product Compliance Engineer Engineering degree (Mechanical, Production, Chemical or similar) or equivalent industry experience 510 years post-graduate experience within an engineering compliance or regulatory environment Essential knowledge of pressure systems, pressure vessels and associated legislation Advantageous experience in compressors, pumps or refrigeration systems Strong working knowledge of UKCA / CE marking and related directives including Machinery, Low Voltage, EMC, PED, ATEX and Ecodesign Awareness of PSSR, DSEAR and PUWER requirements is beneficial Ability to interpret mechanical and electrical schematics Proven process improvement and project coordination skills Excellent communication and organisational ability Additional language skills (Spanish, Mandarin or Italian) advantageous but not essential Why Consider ThisProduct Compliance EngineerRole? £48,000 £52,000 salary 25 days annual leave Pension scheme Life assurance Private medical cover Company sickness scheme Ongoing professional development and funded training If you have strong regulatory and engineering compliance experience and are looking to make a meaningful impact within a technically focused business, wed love to hear from you. Apply today to be considered for this exciting opportunity. JBRP1_UKTJ
Plant Inspection Engineer Gloucester £40k plus car, bonus, overtime, private health Looking for career progression but dont fancy managing people? Want to use your engineering knowledge without spending your days underneath an FLT? As a Plant Inspection Engineer youll take a step up into a role where you can use your hard-earned mechanical skills, enhanced with the world-class training your employer p
Dec 07, 2025
Full time
Plant Inspection Engineer Gloucester £40k plus car, bonus, overtime, private health Looking for career progression but dont fancy managing people? Want to use your engineering knowledge without spending your days underneath an FLT? As a Plant Inspection Engineer youll take a step up into a role where you can use your hard-earned mechanical skills, enhanced with the world-class training your employer p
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Our site in Kiveton employs over 600 and is the UK's largest quiche bakery, producing more than 42 million quiche each year along with a wide range of ready meals and soups. What You'll Be Doing Are you an experienced multiskilled maintenance engineer from an FMCG/Food background looking for a new challenge? As one of our highly skilled maintenance engineers you will be responsible for: Carrying out fault finding, problem solving and planned and preventative maintenance on plant equipment to maximise equipment reliability and performance Responding to internal customer needs to maximise production time according to given priorities Complying with food safety standards and controls to ensure all work is carried out correctly and safely Completing all necessary documentation ensuring that it is kept accurate and is audit ready Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness Maintenance on a range of manufacturing/production/packaging machinery Shift Pattern: 4 on 4 off rotating days and nights What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. As one of our maintenance engineers you will: People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Electrically biased Have experience working as a Maintenance Engineer within manufacturing/FMCG Utilise a proactive approach, with a willingness to learn and develop Have experience in electrical and mechanical fault finding If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return Competitive salary and job-related benefits Holidays Pension up to 8% matched Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Dec 07, 2025
Full time
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Our site in Kiveton employs over 600 and is the UK's largest quiche bakery, producing more than 42 million quiche each year along with a wide range of ready meals and soups. What You'll Be Doing Are you an experienced multiskilled maintenance engineer from an FMCG/Food background looking for a new challenge? As one of our highly skilled maintenance engineers you will be responsible for: Carrying out fault finding, problem solving and planned and preventative maintenance on plant equipment to maximise equipment reliability and performance Responding to internal customer needs to maximise production time according to given priorities Complying with food safety standards and controls to ensure all work is carried out correctly and safely Completing all necessary documentation ensuring that it is kept accurate and is audit ready Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness Maintenance on a range of manufacturing/production/packaging machinery Shift Pattern: 4 on 4 off rotating days and nights What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. As one of our maintenance engineers you will: People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Electrically biased Have experience working as a Maintenance Engineer within manufacturing/FMCG Utilise a proactive approach, with a willingness to learn and develop Have experience in electrical and mechanical fault finding If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return Competitive salary and job-related benefits Holidays Pension up to 8% matched Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Inspection Engineer CAT 2 Pressure Equipment Full time permanent position TV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. Job Summary As part of the TUV family, TUV Rheinland Industrial Services (TRIS) are looking to recruit Inspection Engineers for the UK. We are seeking experenced inspectors to join our growing Industrial team to provide Inspection and Certification of pressurised static equipment e.g. vessels, tanks, piping, relief devices, to meet regulatory and client requirements. We offer comprehensive training, flexible working, and a great pay and benefits package. Job Description Preparing and reviewing Written Schemes of Examination (WSE) Identifying preparation requirements from the WSE Examination in accordance with the WSE Undertaking simple NDT ultrasonic thickness checks, magnetic particle, dye penetrant Coordination of NDT providers for extensive requirements or specialist methods, Preparation of clear reports including photographs Assessment of deterioration Reviewing design calculations and sentencing defects Coordinating repairs. Participation in Risk Based Inspection studies Education / Certificates HNC/Degree Mechanical Engineering (or equivalent) Incorporated Engineer status (desirable) Experience & Skills Good verbal and written communication skills Eye for detail Ability to accurately follow procedures Understanding of engineering principles Able to make and defend difficult decisions Ability to interact and work with others Mechanical Engineering background Chemical and/or oil and gas sector experience (desirable) Understanding of fabrication or repair of pressure equipment (desirable) Experience of non-destructive examination techniques (desirable) Man-management experience (desirable) Your future career prospects look good If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. What can we offer? Standard hours Monday to Friday 40 hours per week. Overtime available. Excellent Health and life insurance, Group Income Protection, Pension, 25 days holiday. Permanent full-time position, office, client site, and home based hybrid working. Accredited training to internationally recognised engineering appointment. Company car on completion of training and appointment Career progression opportunities with structured development. Opportunities to work in many sectors of UK industry. JBRP1_UKTJ
Dec 07, 2025
Full time
Inspection Engineer CAT 2 Pressure Equipment Full time permanent position TV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. Job Summary As part of the TUV family, TUV Rheinland Industrial Services (TRIS) are looking to recruit Inspection Engineers for the UK. We are seeking experenced inspectors to join our growing Industrial team to provide Inspection and Certification of pressurised static equipment e.g. vessels, tanks, piping, relief devices, to meet regulatory and client requirements. We offer comprehensive training, flexible working, and a great pay and benefits package. Job Description Preparing and reviewing Written Schemes of Examination (WSE) Identifying preparation requirements from the WSE Examination in accordance with the WSE Undertaking simple NDT ultrasonic thickness checks, magnetic particle, dye penetrant Coordination of NDT providers for extensive requirements or specialist methods, Preparation of clear reports including photographs Assessment of deterioration Reviewing design calculations and sentencing defects Coordinating repairs. Participation in Risk Based Inspection studies Education / Certificates HNC/Degree Mechanical Engineering (or equivalent) Incorporated Engineer status (desirable) Experience & Skills Good verbal and written communication skills Eye for detail Ability to accurately follow procedures Understanding of engineering principles Able to make and defend difficult decisions Ability to interact and work with others Mechanical Engineering background Chemical and/or oil and gas sector experience (desirable) Understanding of fabrication or repair of pressure equipment (desirable) Experience of non-destructive examination techniques (desirable) Man-management experience (desirable) Your future career prospects look good If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. What can we offer? Standard hours Monday to Friday 40 hours per week. Overtime available. Excellent Health and life insurance, Group Income Protection, Pension, 25 days holiday. Permanent full-time position, office, client site, and home based hybrid working. Accredited training to internationally recognised engineering appointment. Company car on completion of training and appointment Career progression opportunities with structured development. Opportunities to work in many sectors of UK industry. JBRP1_UKTJ
Our client is a very successful precision engineering business and Staffbase have been appointed to recruit for the position of Manufacturing Engineer. £48K -£50K Neg + Benefits The Role: The Manufacturing Engineer will be responsible for providing effective technical support and guidance on multiple engineering manufacturing projects simultaneously. Your duties will include: - Liaise with clients, design, engineering and production teams to ensure effective manufacture of orders Produce works instructions and package of works Provide technical support to engineering, design and production teams Produce regular project progress updates and reporting Monitor and report on project /order progress Review supply chain and procurement functions and negotiate cost reductions, improved service etc. Candidate: The Manufacturing Engineer will have at least 3 years project engineer or manufacturing engineer experience in the precision engineering sector. You will be familiar with and manufacturing parts/components for industries such as MOD, Nuclear, Marine, Aerospace, Oil & gas sectors. You will have excellent Project Management skills and you'll be competent in the use of ERP/MRP systems and you will have HNC/HND in mechanical engineering and you will have a CNC engineering background. AutoCAD and design engineering skills will be advantageous. Hours of Work: Monday to Friday - 39 hours Benefits: Excellent basic salary negotiable £45K - £50K 33 days annual leave Sick pay Life insurance JBRP1_UKTJ
Dec 07, 2025
Full time
Our client is a very successful precision engineering business and Staffbase have been appointed to recruit for the position of Manufacturing Engineer. £48K -£50K Neg + Benefits The Role: The Manufacturing Engineer will be responsible for providing effective technical support and guidance on multiple engineering manufacturing projects simultaneously. Your duties will include: - Liaise with clients, design, engineering and production teams to ensure effective manufacture of orders Produce works instructions and package of works Provide technical support to engineering, design and production teams Produce regular project progress updates and reporting Monitor and report on project /order progress Review supply chain and procurement functions and negotiate cost reductions, improved service etc. Candidate: The Manufacturing Engineer will have at least 3 years project engineer or manufacturing engineer experience in the precision engineering sector. You will be familiar with and manufacturing parts/components for industries such as MOD, Nuclear, Marine, Aerospace, Oil & gas sectors. You will have excellent Project Management skills and you'll be competent in the use of ERP/MRP systems and you will have HNC/HND in mechanical engineering and you will have a CNC engineering background. AutoCAD and design engineering skills will be advantageous. Hours of Work: Monday to Friday - 39 hours Benefits: Excellent basic salary negotiable £45K - £50K 33 days annual leave Sick pay Life insurance JBRP1_UKTJ
Commercial Gas Engineer (with Electrical Qualifications) Regional Coverage up to 50k basic DOE + door to door My client is looking to recruit a Commercial Gas Engineer The primary contract will regional coverage of Commercial clients such as banks, offices, schools, bus depots. The ideal candidate will hold current Commercial Tickets along with a full Driving license. The main Duties will include: Gas Appliance Servicing Installation and replacement of mechanical Plant and equipment Service and repair of Boilers. Service and repair of Gas Fire and overhead radiant heating services and Gas Fired water heaters. Essential Qualifications: Driving License CCN1 - Core domestic national gas safety CEN1 - Domestic central heating boilers COCN1 - Core commercial national gas safety CODNCO1 - Core domestic to core commercial. ICPN1 - First fix pipe installation TPCP1A - Test and purge CENWAT - Boilers and water heating appliances CIGA1 - Indirect-fired heating appliances. CDGA1 - Direct-fired heating appliance. Benefits: Up to 50k basic DOE + Door to door Company Pension 20 days holiday plus Bank Holidays Overtime paid a time and a third Hotels provided (if required) and compensation/allowance for evening meals. For more information, please call David on (phone number removed) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Dec 07, 2025
Full time
Commercial Gas Engineer (with Electrical Qualifications) Regional Coverage up to 50k basic DOE + door to door My client is looking to recruit a Commercial Gas Engineer The primary contract will regional coverage of Commercial clients such as banks, offices, schools, bus depots. The ideal candidate will hold current Commercial Tickets along with a full Driving license. The main Duties will include: Gas Appliance Servicing Installation and replacement of mechanical Plant and equipment Service and repair of Boilers. Service and repair of Gas Fire and overhead radiant heating services and Gas Fired water heaters. Essential Qualifications: Driving License CCN1 - Core domestic national gas safety CEN1 - Domestic central heating boilers COCN1 - Core commercial national gas safety CODNCO1 - Core domestic to core commercial. ICPN1 - First fix pipe installation TPCP1A - Test and purge CENWAT - Boilers and water heating appliances CIGA1 - Indirect-fired heating appliances. CDGA1 - Direct-fired heating appliance. Benefits: Up to 50k basic DOE + Door to door Company Pension 20 days holiday plus Bank Holidays Overtime paid a time and a third Hotels provided (if required) and compensation/allowance for evening meals. For more information, please call David on (phone number removed) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Continuous Improvement Engineer (known internally as Process Lead) Hellaby (Home of KP Nuts) On-site Monday - Friday 07:30 - 16:00 Join our snack-loving team We're looking for a Continuous Improvement Engineer to join us at KP Snacks. If you're ready to bring your ideas to the table, grow your skills and be part of a team that values what makes you, you - this could be your next big move. About the role This is a stretching and rewarding role within our high-performing Manufacturing team. You'll be at the heart of driving performance improvements across our production lines, using lean manufacturing tools and coaching colleagues to embed new ways of working. You'll take ownership of key systems and processes, helping us reduce losses, improve changeovers and build capability across the site. What's in it for you? We believe in rewarding our colleagues and helping them thrive. Here's a flavour of what we offer: Annual bonus scheme Comprehensive healthcare support - including Medicash Health Cash Plan or Private Healthcare, Digital GP, Best Doctors second opinion service and specialist cancer care KP Pension Plan - contribution matching up to 7% of your salary 25 days holiday, plus the option to buy more KP4ME - our online platform for benefits, discounts, wellbeing tools and more What will you be doing? Leading the development and ownership of the Centre Line Management System for your manufacturing line(s), ensuring consistent performance and control Coaching Equipment Owners to identify and respond to deviations, improve changeover procedures and embed best practice across the site Conducting weekly health checks to assess gaps in our Daily Management Systems and implementing effective countermeasures Analysing machine data to identify and eliminate losses, managing our online data capture system and sharing insights to drive improvement Participating in daily performance reviews with Line Leads to prioritise actions, allocate resources and report on results, while supporting site safety and hygiene initiatives in collaboration with our specialists Who are we? We're KP Snacks, part of the Intersnack family. Across more than 30 countries, over 15,000 of us work together to make the snacks people love - from Hula Hoops to McCoy's. In the UK, we're a team of around 2,400 colleagues, based across seven sites and our Slough HQ. We're proud of our close-knit culture, where we speak up, celebrate differences and push boundaries together. We're committed to inclusion We're building a workplace where everyone belongs. If you don't tick every box, we'd still love to hear from you - your unique perspective could be just what we need. And if there's anything we can do to make the process easier for you, just let us know. We'd love to hear from you if you can bring: A Mechanical Engineering degree or completed Mechanical Engineering apprenticeship Experience in a world-class manufacturing environment, ideally within FMCG Advanced Microsoft Excel skills and confidence working with data Strong coaching and communication skills, with the ability to positively influence change and build capability A curious mindset, with a passion for problem solving, continuous learning and sharing solutions
Dec 07, 2025
Full time
Continuous Improvement Engineer (known internally as Process Lead) Hellaby (Home of KP Nuts) On-site Monday - Friday 07:30 - 16:00 Join our snack-loving team We're looking for a Continuous Improvement Engineer to join us at KP Snacks. If you're ready to bring your ideas to the table, grow your skills and be part of a team that values what makes you, you - this could be your next big move. About the role This is a stretching and rewarding role within our high-performing Manufacturing team. You'll be at the heart of driving performance improvements across our production lines, using lean manufacturing tools and coaching colleagues to embed new ways of working. You'll take ownership of key systems and processes, helping us reduce losses, improve changeovers and build capability across the site. What's in it for you? We believe in rewarding our colleagues and helping them thrive. Here's a flavour of what we offer: Annual bonus scheme Comprehensive healthcare support - including Medicash Health Cash Plan or Private Healthcare, Digital GP, Best Doctors second opinion service and specialist cancer care KP Pension Plan - contribution matching up to 7% of your salary 25 days holiday, plus the option to buy more KP4ME - our online platform for benefits, discounts, wellbeing tools and more What will you be doing? Leading the development and ownership of the Centre Line Management System for your manufacturing line(s), ensuring consistent performance and control Coaching Equipment Owners to identify and respond to deviations, improve changeover procedures and embed best practice across the site Conducting weekly health checks to assess gaps in our Daily Management Systems and implementing effective countermeasures Analysing machine data to identify and eliminate losses, managing our online data capture system and sharing insights to drive improvement Participating in daily performance reviews with Line Leads to prioritise actions, allocate resources and report on results, while supporting site safety and hygiene initiatives in collaboration with our specialists Who are we? We're KP Snacks, part of the Intersnack family. Across more than 30 countries, over 15,000 of us work together to make the snacks people love - from Hula Hoops to McCoy's. In the UK, we're a team of around 2,400 colleagues, based across seven sites and our Slough HQ. We're proud of our close-knit culture, where we speak up, celebrate differences and push boundaries together. We're committed to inclusion We're building a workplace where everyone belongs. If you don't tick every box, we'd still love to hear from you - your unique perspective could be just what we need. And if there's anything we can do to make the process easier for you, just let us know. We'd love to hear from you if you can bring: A Mechanical Engineering degree or completed Mechanical Engineering apprenticeship Experience in a world-class manufacturing environment, ideally within FMCG Advanced Microsoft Excel skills and confidence working with data Strong coaching and communication skills, with the ability to positively influence change and build capability A curious mindset, with a passion for problem solving, continuous learning and sharing solutions
Vehicle Technician Location: Sunderland Salary: OTE up to £40,600, including basic Hours: Monday to Friday, 8:30am to 5:30pm,1 in 3 Saturdays Reference: 29107 We have a new job vacancy available for a Vehicle Technician in Sunderland. My client is one of the UK's leading main dealerships in thearea and they're looking for an experienced Vehicle Technician wanting to join agreat team! This is a great opportunity for a Vehicle Technician looking to work for and alongside one of the best in the industry. If you're a Vehicle Technician currently on the lookout then apply now! Benefits for Vehicle Technicians Starting salary competitive within the industry or Attractive starting salary Company pension scheme Generous holiday allowance Role Overview Vehicle Technician Perform vehicle servicing and general maintenance Diagnose faults and perform fault finding Repair and replace brakes, suspension, and clutch components Cambelt replacement Requirements Vehicle Technician At least one years experience in a workshop environment Minimum Level 2 in Light Vehicle Maintenance & Repair (or equivalent) Strong mechanical skills Reliable work history with consistent attendance Own a well stocked toolbox appropriate for workshop duties How to Apply If you are interested in this Vehicle Technician vacancy, please send your CV and we will be in touch upon receipt. All applications will be treated with the strictest confidence. Consultant: Bethany Bishop Octane Recruitment VTNTH Octane Recruitment is a leading recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. Octane Recruitment covers a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments. JBRP1_UKTJ
Dec 07, 2025
Full time
Vehicle Technician Location: Sunderland Salary: OTE up to £40,600, including basic Hours: Monday to Friday, 8:30am to 5:30pm,1 in 3 Saturdays Reference: 29107 We have a new job vacancy available for a Vehicle Technician in Sunderland. My client is one of the UK's leading main dealerships in thearea and they're looking for an experienced Vehicle Technician wanting to join agreat team! This is a great opportunity for a Vehicle Technician looking to work for and alongside one of the best in the industry. If you're a Vehicle Technician currently on the lookout then apply now! Benefits for Vehicle Technicians Starting salary competitive within the industry or Attractive starting salary Company pension scheme Generous holiday allowance Role Overview Vehicle Technician Perform vehicle servicing and general maintenance Diagnose faults and perform fault finding Repair and replace brakes, suspension, and clutch components Cambelt replacement Requirements Vehicle Technician At least one years experience in a workshop environment Minimum Level 2 in Light Vehicle Maintenance & Repair (or equivalent) Strong mechanical skills Reliable work history with consistent attendance Own a well stocked toolbox appropriate for workshop duties How to Apply If you are interested in this Vehicle Technician vacancy, please send your CV and we will be in touch upon receipt. All applications will be treated with the strictest confidence. Consultant: Bethany Bishop Octane Recruitment VTNTH Octane Recruitment is a leading recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. Octane Recruitment covers a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments. JBRP1_UKTJ
Maintenance Engineer (Building Services / Mechanical) £40,000 - £42,000 + Overtime OTE 50k + Van + Healthcare + Funded Security Clearance Croydon/South London Are you a Mechanical Maintenance Engineer from a building services background looking for a varied role covering a local patch, for a close-knit company who will look after you through excellent benefits, plenty of optional overtime, and full
Dec 07, 2025
Full time
Maintenance Engineer (Building Services / Mechanical) £40,000 - £42,000 + Overtime OTE 50k + Van + Healthcare + Funded Security Clearance Croydon/South London Are you a Mechanical Maintenance Engineer from a building services background looking for a varied role covering a local patch, for a close-knit company who will look after you through excellent benefits, plenty of optional overtime, and full
Our client is a trusted name in the logistics and haulage industry, committed to delivering high-quality, reliable transport solutions to their customers. They maintain a modern fleet and pride themselves on strong values including integrity, safety, and outstanding service. Due to continued growth, we are seeking a skilled and motivated HGV Technician to join their workshop team in Ellesmere Port. As an HGV Technician, you will play a critical role in ensuring all vehicles are safe, roadworthy, and maintained to the highest standards. You'll carry out inspections, diagnostics, repairs, and preventative maintenance across a range of heavy goods vehicles. Your expertise will help minimise downtime and ensure that the fleet operates reliably and efficiently. The Role: Diagnose, repair, and maintain HGVs (trucks, trailers, and associated components) Conduct routine inspections and servicing (brakes, steering, suspension, engine systems, electrics, hydraulics) Troubleshoot faults using diagnostic tools and equipment Overhaul or replace mechanical components (gearboxes, axles, bearings, etc.) Carry out safety and compliance checks (MOT, LOLER, safety standards) Liaise with drivers, workshop team, and management to coordinate repairs Ensure workshop safety, cleanliness, and efficient layout The Requirements: NVQ Level 3 (or equivalent) in Heavy Vehicle Maintenance or Mechanical Engineering Proven experience working on HGVs, trailers, or heavy mechanical vehicles Proficient with diagnostic equipment, workshop tooling, and fault-finding techniques Strong understanding of vehicle systems (engine, transmission, brakes, hydraulics, electrics) Knowledge of regulatory and safety requirements (MOT, LOLER, compliance) Excellent problem-solving skills and attention to detail Good communication and teamwork skills Full, valid driving licence (class relevant) The Package: £20 p/h basic rate and £30 p/h for overtime, with plenty available 6am to 2pm - Monday to Friday Weekends optional at overtime rate Flexible working hours, later start times available 22 days annual leave + bank holidays Excellent additional benefits If you're an experienced HGV Technician who is looking for a local business with a family-oriented approach, then this is the role for you! Apply today or contact Rob Tempest on to learn more. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here. JBRP1_UKTJ
Dec 07, 2025
Full time
Our client is a trusted name in the logistics and haulage industry, committed to delivering high-quality, reliable transport solutions to their customers. They maintain a modern fleet and pride themselves on strong values including integrity, safety, and outstanding service. Due to continued growth, we are seeking a skilled and motivated HGV Technician to join their workshop team in Ellesmere Port. As an HGV Technician, you will play a critical role in ensuring all vehicles are safe, roadworthy, and maintained to the highest standards. You'll carry out inspections, diagnostics, repairs, and preventative maintenance across a range of heavy goods vehicles. Your expertise will help minimise downtime and ensure that the fleet operates reliably and efficiently. The Role: Diagnose, repair, and maintain HGVs (trucks, trailers, and associated components) Conduct routine inspections and servicing (brakes, steering, suspension, engine systems, electrics, hydraulics) Troubleshoot faults using diagnostic tools and equipment Overhaul or replace mechanical components (gearboxes, axles, bearings, etc.) Carry out safety and compliance checks (MOT, LOLER, safety standards) Liaise with drivers, workshop team, and management to coordinate repairs Ensure workshop safety, cleanliness, and efficient layout The Requirements: NVQ Level 3 (or equivalent) in Heavy Vehicle Maintenance or Mechanical Engineering Proven experience working on HGVs, trailers, or heavy mechanical vehicles Proficient with diagnostic equipment, workshop tooling, and fault-finding techniques Strong understanding of vehicle systems (engine, transmission, brakes, hydraulics, electrics) Knowledge of regulatory and safety requirements (MOT, LOLER, compliance) Excellent problem-solving skills and attention to detail Good communication and teamwork skills Full, valid driving licence (class relevant) The Package: £20 p/h basic rate and £30 p/h for overtime, with plenty available 6am to 2pm - Monday to Friday Weekends optional at overtime rate Flexible working hours, later start times available 22 days annual leave + bank holidays Excellent additional benefits If you're an experienced HGV Technician who is looking for a local business with a family-oriented approach, then this is the role for you! Apply today or contact Rob Tempest on to learn more. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here. JBRP1_UKTJ
Job Title: Principal Mechanical Engineer - PNED Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: £45,628 - £57,500 dependent on experience What you'll be doing: Collaborate closely with the build organisation, providing engineering support to ensure the final product aligns with original design intent Demonstrate a strong understanding of key requirements and critical dimensions related to major structural components Lead the assessment and implementation of design changes impacting primary structural elements, whether driven by emergent issues, continuous improvement, or process updates Support, or where appropriate, serve as the engineering representative within test and authorisation groups Develop specialised knowledge of the unique build sequence of the Reactor Compartment Unit and deliver ongoing engineering support throughout construction Represent the engineering function during the planning and execution of major construction milestones within the Reactor Compartment Unit's scope Investigate and present robust technical solutions to challenges encountered during the construction of the Naval Reactor Plant Provide well-reasoned technical recommendations to key stakeholders, including Rolls-Royce and the Ministry of Defence, to support or constructively challenge existing requirements Your skills and experiences: Essential: Degree-level qualification in Engineering, preferably with a focus on Mechanical or Structural disciplines Proficient in interpreting mechanical drawings, with a solid understanding of geometric dimensioning and tolerancing (GD&T) Familiarity with welding engineering principles and non-destructive examination (NDE) techniques Strong technical report writing skills, with experience in producing clear justifications for design changes Desirable: Understanding of stress, fatigue, and thermal analysis principles in engineering applications Awareness of nuclear radiation shielding requirements and best practices Prior experience working within a nuclear plant environment Knowledge of the nuclear industry, including familiarity with regulatory bodies and compliance standards Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Nuclear Engineering Department team: As a Principal Mechanical Engineer - PNED, you will play a critical role in supporting the design, build, and test phases of the Naval Reactor Plant (NRP) across multiple programmes, ensuring alignments with the original design intent. This includes leading the resolution of complex technical issues encountered during construction and testing, with a focus on developing robust engineering solutions and maintaining the integrity of the supporting safety case. You will provide expert guidance to internal teams including Engineering Delivery, Test & Commissioning, Operations, and Project Management . Additionally, you will represent the business in collaboration with key external stakeholders, including the Ministry of Defence (MoD) and Rolls-Royce Power, ensuring effective coordination across the wider enterprise. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 07, 2025
Full time
Job Title: Principal Mechanical Engineer - PNED Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: £45,628 - £57,500 dependent on experience What you'll be doing: Collaborate closely with the build organisation, providing engineering support to ensure the final product aligns with original design intent Demonstrate a strong understanding of key requirements and critical dimensions related to major structural components Lead the assessment and implementation of design changes impacting primary structural elements, whether driven by emergent issues, continuous improvement, or process updates Support, or where appropriate, serve as the engineering representative within test and authorisation groups Develop specialised knowledge of the unique build sequence of the Reactor Compartment Unit and deliver ongoing engineering support throughout construction Represent the engineering function during the planning and execution of major construction milestones within the Reactor Compartment Unit's scope Investigate and present robust technical solutions to challenges encountered during the construction of the Naval Reactor Plant Provide well-reasoned technical recommendations to key stakeholders, including Rolls-Royce and the Ministry of Defence, to support or constructively challenge existing requirements Your skills and experiences: Essential: Degree-level qualification in Engineering, preferably with a focus on Mechanical or Structural disciplines Proficient in interpreting mechanical drawings, with a solid understanding of geometric dimensioning and tolerancing (GD&T) Familiarity with welding engineering principles and non-destructive examination (NDE) techniques Strong technical report writing skills, with experience in producing clear justifications for design changes Desirable: Understanding of stress, fatigue, and thermal analysis principles in engineering applications Awareness of nuclear radiation shielding requirements and best practices Prior experience working within a nuclear plant environment Knowledge of the nuclear industry, including familiarity with regulatory bodies and compliance standards Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Nuclear Engineering Department team: As a Principal Mechanical Engineer - PNED, you will play a critical role in supporting the design, build, and test phases of the Naval Reactor Plant (NRP) across multiple programmes, ensuring alignments with the original design intent. This includes leading the resolution of complex technical issues encountered during construction and testing, with a focus on developing robust engineering solutions and maintaining the integrity of the supporting safety case. You will provide expert guidance to internal teams including Engineering Delivery, Test & Commissioning, Operations, and Project Management . Additionally, you will represent the business in collaboration with key external stakeholders, including the Ministry of Defence (MoD) and Rolls-Royce Power, ensuring effective coordination across the wider enterprise. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Is it time for a career change? My client are currently looking to recruit an experienced electrical maintenance engineer to join their site in South Lanarkshire (commutable from Glasgow, Paisley, East Kilbride, Cumbernauld, Livingston & surrounding areas). This maintenance engineer role is based on a pitman shift pattern. The company is well established with nearly 100 years of manufacturing experience. The organisation offers job security alongside the opportunity for development and progression. This is the chance to join an impressive site that has received significant investment aimed at continuous improvement and growth over recent years, with the goal of maintaining its position at the forefront of their market. Maintenance Engineer Responsibilities: Undertaking planned preventative maintenance and reactive breakdowns Electrical fault finding Fault finding on PLC systems General electrical / mechanical maintenance and repair of buildings and facilities Working closely with the process engineering and quality engineering teams Supporting colleagues with project work Qualifications and Experience: A time served apprenticeship Experience of maintenance gained in the manufacturing sector Experience of fault finding on PLC systems Knowledge of hydraulics and pneumatics
Dec 07, 2025
Full time
Is it time for a career change? My client are currently looking to recruit an experienced electrical maintenance engineer to join their site in South Lanarkshire (commutable from Glasgow, Paisley, East Kilbride, Cumbernauld, Livingston & surrounding areas). This maintenance engineer role is based on a pitman shift pattern. The company is well established with nearly 100 years of manufacturing experience. The organisation offers job security alongside the opportunity for development and progression. This is the chance to join an impressive site that has received significant investment aimed at continuous improvement and growth over recent years, with the goal of maintaining its position at the forefront of their market. Maintenance Engineer Responsibilities: Undertaking planned preventative maintenance and reactive breakdowns Electrical fault finding Fault finding on PLC systems General electrical / mechanical maintenance and repair of buildings and facilities Working closely with the process engineering and quality engineering teams Supporting colleagues with project work Qualifications and Experience: A time served apprenticeship Experience of maintenance gained in the manufacturing sector Experience of fault finding on PLC systems Knowledge of hydraulics and pneumatics
