Health, Safety and Wellbeing Manager, Snowdonia, North Wales We are recruiting for a Health, Safety and Wellbeing Manager to lead and be accountable for health and safety on a major infrastructure scheme in Snowdonia. The project involves the construction of a new tunnel and the installation of high voltage power cables beneath an estuary, replacing an existing overhead section and reducing visual impact in a protected landscape. This is a senior, site facing role reporting into the Project Director, with responsibility for providing visible leadership, driving best practice, and ensuring the project team and supply chain are fully supported to deliver safely. Salary and package Salary up to 80,000 Car allowance available The role You will provide leadership across safety, health and sustainability, advising directors, managers and supervisors on their statutory duties, and ensuring robust controls and compliance with company procedures and relevant legislation. You will manage surveillance, audits and inspections, oversee incident investigations, track trends through reporting and statistics, and lead improvement initiatives and campaigns. Key responsibilities Lead best practice across safety, health and sustainability across the project Advise and support project leadership to discharge health and safety responsibilities under legislation and company procedures Ensure management controls are in place so personnel understand statutory duties and responsibilities Drive compliance with company requirements and contract requirements across site teams and the supply chain Plan and carry out regular inspections, audits and surveillance, producing actions and recommendations Lead and oversee accident and incident investigations, analyse trends, and implement preventative actions Collate and review health and safety statistics to identify areas for improvement Develop and deliver lessons learned sessions, campaigns and improvement plans Prepare and review health and safety documentation including plans, procedures, method statements, and third party submissions Provide reports, presentations and information as required Ensure compliance with partner KPIs and exercise stop work authority where health and safety controls are in question Experience required Proven leadership on major civil engineering or infrastructure schemes in a senior health and safety role Experience on tunnelling, shafts, underground works, heavy civils or similarly complex projects is highly desirable Strong working knowledge of health and safety plans and procedures and contractor management Track record of delivering audits, inspections and incident investigation processes with clear corrective actions Confident engaging with directors, managers, supervisors, contractors and client stakeholders Experience managing reporting, statistics, trends and continuous improvement planning Comfortable working within a structured health and safety management system and competence systems such as Themis Qualifications and certifications Relevant CSCS card for the role Suitable health and safety qualification aligned to a senior construction environment, for example NEBOSH Construction or equivalent Professional membership status would be beneficial, for example IOSH If you would like to be considered, please send your CV and I will come back to you with full project details and next steps.
Jan 09, 2026
Full time
Health, Safety and Wellbeing Manager, Snowdonia, North Wales We are recruiting for a Health, Safety and Wellbeing Manager to lead and be accountable for health and safety on a major infrastructure scheme in Snowdonia. The project involves the construction of a new tunnel and the installation of high voltage power cables beneath an estuary, replacing an existing overhead section and reducing visual impact in a protected landscape. This is a senior, site facing role reporting into the Project Director, with responsibility for providing visible leadership, driving best practice, and ensuring the project team and supply chain are fully supported to deliver safely. Salary and package Salary up to 80,000 Car allowance available The role You will provide leadership across safety, health and sustainability, advising directors, managers and supervisors on their statutory duties, and ensuring robust controls and compliance with company procedures and relevant legislation. You will manage surveillance, audits and inspections, oversee incident investigations, track trends through reporting and statistics, and lead improvement initiatives and campaigns. Key responsibilities Lead best practice across safety, health and sustainability across the project Advise and support project leadership to discharge health and safety responsibilities under legislation and company procedures Ensure management controls are in place so personnel understand statutory duties and responsibilities Drive compliance with company requirements and contract requirements across site teams and the supply chain Plan and carry out regular inspections, audits and surveillance, producing actions and recommendations Lead and oversee accident and incident investigations, analyse trends, and implement preventative actions Collate and review health and safety statistics to identify areas for improvement Develop and deliver lessons learned sessions, campaigns and improvement plans Prepare and review health and safety documentation including plans, procedures, method statements, and third party submissions Provide reports, presentations and information as required Ensure compliance with partner KPIs and exercise stop work authority where health and safety controls are in question Experience required Proven leadership on major civil engineering or infrastructure schemes in a senior health and safety role Experience on tunnelling, shafts, underground works, heavy civils or similarly complex projects is highly desirable Strong working knowledge of health and safety plans and procedures and contractor management Track record of delivering audits, inspections and incident investigation processes with clear corrective actions Confident engaging with directors, managers, supervisors, contractors and client stakeholders Experience managing reporting, statistics, trends and continuous improvement planning Comfortable working within a structured health and safety management system and competence systems such as Themis Qualifications and certifications Relevant CSCS card for the role Suitable health and safety qualification aligned to a senior construction environment, for example NEBOSH Construction or equivalent Professional membership status would be beneficial, for example IOSH If you would like to be considered, please send your CV and I will come back to you with full project details and next steps.
Site Manager required for a Major Offshore Wind developer in Italy. Responsibilities: Serve as the main interface to the Customer on all contractual matters and maintain good relationships with local authorities and organizations. Manage manpower requirements on site and drive site activities to achieve contractual milestones and targets. Ensure all personnel on site are well informed about the Scope of Work (SoW) and Division of Work (DoW). Manage change management on site, including variation orders to subcontractors. Guarantee that all tests are performed and accepted by the customer according to contractual conditions. Foster a culture of proper understanding and adherence by all site personnel to Health, Environment, and Safety requirements of the business, Customer, and local authorities. Ensure all activities are done with the expected quality and that all quality records are created and properly archived. Ensure all permits, licenses, and requirements are in place for compliant execution of site activities. Ensure structured, up-to-date, and reliable documentation handling on site and towards Headquarters. Guarantee that all activities are performed within defined contractual schedules and milestones; understand the project budget and ensure costs for site activities are maintained within budget. Ensure contractual obligations are met and to the satisfaction of customers. Assignments may include Site Manager roles in medium to large EPC converter station projects, complex Consortium projects, or as Deputy Site Manager in large EPC converter station projects. Requirements: Bachelor's degree in mechanical, electrical, or civil engineering. Minimum 6 years' experience working as a Site Manager on complex construction sites in the energy sector or similar industries, particularly in medium and large size projects. Experience in HVDC or High Voltage industrial construction projects is a plus Fluent in English and Italian, written and oral. Sound commercial awareness, contracts management experience, and business acumen. Experience in Civil Works, Installation, and/or Commissioning. Relevant and certified knowledge and experience in the field of HSE. Very structured and organized, good people management skills, collaboration and team working spirit, resilient, excellent customer interface and communication skills. Has valid Italian training/certification that allows him to act as Dirigente according to the Italian legislation (law 81/08), particularly in regards to HSE requirements. Immediate availability.
Jan 08, 2026
Contractor
Site Manager required for a Major Offshore Wind developer in Italy. Responsibilities: Serve as the main interface to the Customer on all contractual matters and maintain good relationships with local authorities and organizations. Manage manpower requirements on site and drive site activities to achieve contractual milestones and targets. Ensure all personnel on site are well informed about the Scope of Work (SoW) and Division of Work (DoW). Manage change management on site, including variation orders to subcontractors. Guarantee that all tests are performed and accepted by the customer according to contractual conditions. Foster a culture of proper understanding and adherence by all site personnel to Health, Environment, and Safety requirements of the business, Customer, and local authorities. Ensure all activities are done with the expected quality and that all quality records are created and properly archived. Ensure all permits, licenses, and requirements are in place for compliant execution of site activities. Ensure structured, up-to-date, and reliable documentation handling on site and towards Headquarters. Guarantee that all activities are performed within defined contractual schedules and milestones; understand the project budget and ensure costs for site activities are maintained within budget. Ensure contractual obligations are met and to the satisfaction of customers. Assignments may include Site Manager roles in medium to large EPC converter station projects, complex Consortium projects, or as Deputy Site Manager in large EPC converter station projects. Requirements: Bachelor's degree in mechanical, electrical, or civil engineering. Minimum 6 years' experience working as a Site Manager on complex construction sites in the energy sector or similar industries, particularly in medium and large size projects. Experience in HVDC or High Voltage industrial construction projects is a plus Fluent in English and Italian, written and oral. Sound commercial awareness, contracts management experience, and business acumen. Experience in Civil Works, Installation, and/or Commissioning. Relevant and certified knowledge and experience in the field of HSE. Very structured and organized, good people management skills, collaboration and team working spirit, resilient, excellent customer interface and communication skills. Has valid Italian training/certification that allows him to act as Dirigente according to the Italian legislation (law 81/08), particularly in regards to HSE requirements. Immediate availability.
Electrical Site Construction Supervisor - LV/HV Projects Staythorpe BESS, Newark, Nottinghamshire Additional coverage: Nottingham, Derby, Chesterfield & M1 Corridor Full-Time Competitive Salary + Benefits + Company Vehicle About My Client My client is a NERS-accredited Independent Connections Provider (ICP), specializing in high-voltage electrical and civil engineering solutions. They deliver projects up to 132kV and work on National Grid infrastructure up to 400kV. Currently, they're seeking an experienced Electrical Site Construction Supervisor for their Battery Energy Storage System (BESS) project at Staythorpe. Role Overview You'll supervise and coordinate LV/HV electrical installation works on-site, ensuring safety, quality, and efficiency. You will collaborate with the Project Manager, subcontractors, and suppliers to deliver projects on time and to specification. Key Responsibilities Oversee installation of LV/HV systems (switchgear, transformers, earthing, etc.). Ensure compliance with electrical drawings and DNO specifications (G81). Supervise above/below-ground installations and support testing and commissioning. Review RAMS, subcontractor documentation, and ensure safety compliance. Provide progress updates to the Project Manager and maintain high safety standards. What We're Looking For 5+ years in LV/HV electrical installations (HV essential). Strong experience with switchgear, transformers, and substations. Knowledge of DNO standards and G81 specifications. Experience supervising technical electrical site works and subcontractors. Strong understanding of health & safety regulations. Proficiency in Microsoft Office. Required/Desirable Qualifications City & Guilds 2382 - 18th Edition Wiring Regulations City & Guilds 2391 - Inspection & Testing SMSTS, NRSWA Street Works Supervisor, Full UK Driving Licence. Emergency First Aid / Fire Warden. What Is on Offer Competitive salary with overtime and benefits. Company vehicle and tools provided. Long-term career opportunity at Staythorpe BESS project. Ongoing career development and training. Safety-focused and collaborative work environment. RG Setsquare is acting as an Employment Agency in relation to this vacancy.
Jan 08, 2026
Full time
Electrical Site Construction Supervisor - LV/HV Projects Staythorpe BESS, Newark, Nottinghamshire Additional coverage: Nottingham, Derby, Chesterfield & M1 Corridor Full-Time Competitive Salary + Benefits + Company Vehicle About My Client My client is a NERS-accredited Independent Connections Provider (ICP), specializing in high-voltage electrical and civil engineering solutions. They deliver projects up to 132kV and work on National Grid infrastructure up to 400kV. Currently, they're seeking an experienced Electrical Site Construction Supervisor for their Battery Energy Storage System (BESS) project at Staythorpe. Role Overview You'll supervise and coordinate LV/HV electrical installation works on-site, ensuring safety, quality, and efficiency. You will collaborate with the Project Manager, subcontractors, and suppliers to deliver projects on time and to specification. Key Responsibilities Oversee installation of LV/HV systems (switchgear, transformers, earthing, etc.). Ensure compliance with electrical drawings and DNO specifications (G81). Supervise above/below-ground installations and support testing and commissioning. Review RAMS, subcontractor documentation, and ensure safety compliance. Provide progress updates to the Project Manager and maintain high safety standards. What We're Looking For 5+ years in LV/HV electrical installations (HV essential). Strong experience with switchgear, transformers, and substations. Knowledge of DNO standards and G81 specifications. Experience supervising technical electrical site works and subcontractors. Strong understanding of health & safety regulations. Proficiency in Microsoft Office. Required/Desirable Qualifications City & Guilds 2382 - 18th Edition Wiring Regulations City & Guilds 2391 - Inspection & Testing SMSTS, NRSWA Street Works Supervisor, Full UK Driving Licence. Emergency First Aid / Fire Warden. What Is on Offer Competitive salary with overtime and benefits. Company vehicle and tools provided. Long-term career opportunity at Staythorpe BESS project. Ongoing career development and training. Safety-focused and collaborative work environment. RG Setsquare is acting as an Employment Agency in relation to this vacancy.
We have an exciting opportunity for a Project Manager to join a leading engineering organisation, working on Renewables projects in Co. Tipperary. About the Role You will oversee projects from start to finish, coordinating all design works and interfaces with third-party stakeholders. You will maintain excellent relationships with clients and act as an ambassador throughout the project lifecycle. Key responsibilities include: Overseeing construction projects from beginning to end Co-ordinating design works and interfaces with all third-party stakeholders Maintaining strong client relationships from project start to handover Arranging and chairing handover from estimating to construction teams Liaising with senior management on staffing and recruitment plans Ensuring site audits for Quality Control are carried out according to the design plan Holding weekly progress meetings with sub-contractors, ensuring safety and training are discussed Candidate Requirements Trade qualification through apprenticeship or engineering qualification Relevant H&S qualification, e.g., IOHS Managing Safely or equivalent Proven experience managing projects from scoping through to completion and delivery Experience managing, coordinating, and developing staff Experience supporting a continuous improvement culture among project teams Experience with High Voltage projects Awareness of BIM technologies where relevant Understanding of engineering processes and best practice
Jan 07, 2026
Full time
We have an exciting opportunity for a Project Manager to join a leading engineering organisation, working on Renewables projects in Co. Tipperary. About the Role You will oversee projects from start to finish, coordinating all design works and interfaces with third-party stakeholders. You will maintain excellent relationships with clients and act as an ambassador throughout the project lifecycle. Key responsibilities include: Overseeing construction projects from beginning to end Co-ordinating design works and interfaces with all third-party stakeholders Maintaining strong client relationships from project start to handover Arranging and chairing handover from estimating to construction teams Liaising with senior management on staffing and recruitment plans Ensuring site audits for Quality Control are carried out according to the design plan Holding weekly progress meetings with sub-contractors, ensuring safety and training are discussed Candidate Requirements Trade qualification through apprenticeship or engineering qualification Relevant H&S qualification, e.g., IOHS Managing Safely or equivalent Proven experience managing projects from scoping through to completion and delivery Experience managing, coordinating, and developing staff Experience supporting a continuous improvement culture among project teams Experience with High Voltage projects Awareness of BIM technologies where relevant Understanding of engineering processes and best practice
81515 - Commissioning Engineer This commissioning engineer role will report to the construction manager and will work within capital programme based in our eastern region across Hertfordshire, Essex and East Anglia. You will be a permanent employee in our UK Power Networks team. You will attract a salary of 80,574and a bonus of 3%. If you are successful, you will need to undertake a medical and DBS reference check Close Date: .25/01/2026 We also provide the following additional benefits 25 Days Annual Leave plus bank holidays. Reservist Leave - Additional 18 days full pay and 22 unpaid Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit Scheme, Season Ticket Loan Tax efficient benefits: Cycle to Work, Home & Tech, and Green Car Leasing Schemes Occupational Health support Switched On - scheme providing discount on hundreds of retailers' products Discounted gym membership Employee Assistance Programme Job Purpose: The Role of the Commissioning Engineer in the Capital Programme Operations Team is to ensure installations, plant and equipment are correctly tested and proven prior to being put into service. This includes management and supervision of a commissioning team. The Commissioning Engineer will provide advice on technical issues for projects within the Capital Programme portfolio. You will act as or work together with the Lead Commissioning Engineer in the delivery of the APP and Connections portfolio, providing assistance with technical issues, operational duties, management of commissioning plans, and liaison with contract commissioning engineers to ensure full compliance with UKPN Policies and Procedures. Dimensions: Liaison/coordination/cooperating with Programme managers to deliver the regional APP/Connections portfolio of circa 150M per year. Responsible for full compliance with UKPN policies and procedures. Responsible for signing off new multi-million-pound installations as fit for service. Responsible for operating the Network from an Authorised Person perspective up to and including 132kV. Principal Accountabilities: Help develop Multiple Projects from Gate A to close out Gate D. Manages a portfolio of multiple electrical projects. Provide Engineering, Safety, Management, and leadership to a group of contract commissioning engineers and Fitters as required. Co-ordinate with the Construction team and other stakeholders to ensure resources are in place to deliver the project. Actively develop staff by acting as a mentor and coach to assist in the team's authorisations development. Attend as required project specific meetings and project reviews, making sure UKPN standards are adhered to. Liaise as necessary on matters of Operational, plant and cable policy for delivery of several projects to time, quality, cost, maintaining the highest levels of safety and environmental management. To provide Input on Quality and Deliverability. Ensure commissioning assurance through audits on quality of work, technical competencies, adherence to specifications, compliance with testing and commissioning procedures, and safety and environmental procedures. Ensure the required project completion data gets completed and submitted for processing. Ensure compliance with CDM and Safety Documentation where required. Input into Project issues log and risk register. Ensure that all work is carried out to provide very high levels of Customer Service e.g. minimise CIs & CMLs, network risk, and customer complaints. Ensure that all workers engaged on the projects/portfolio of projects are fully aware of all safety and environmental requirements. Promote the company's values. Manage the commissioning drawings and test forms including as-built records. Main Duties: Manage every stage of the commissioning process from cold commissioning to energisation for a number of projects. Keep up to date with new relay and testing software to be able to install multiple items of equipment onto the network. Check and apply settings to complex relays. Drive complex testing equipment to be able to test and commission complex relay schemes. Commission Primary transformers, feeders, and primary plant onto the network. Review all designs before starting work to ensure compliance with current policies and procedures. Liaise with Project Managers, Designers and Surveyors to ensure workable designs are produced. Have input to the Hazard Elimination and Management Checklist (HEML). Supervise a team of electrical fitters whether UKPN staff or contractors where required. Attends meeting with stakeholders. Issue Safety documents in line with the DSRs, issue task instructions, and adhere to the Putting people To Work (PPTW) policy. Raise TQ's, CE and EWN issues that may affect project delivery and submit via Unifier. Provide guidance where appropriate and create solutions from a commissioning perspective for complex challenges. Ensure work is delivered to design and specification. Ensure suitable Risk Assessment and Method Statement (RAMS) and Safe System of work (SSOW) are in place for each task requiring operational precautions. Proactively seeking continuous improvement and development of others. Carries out Site and BE audits and records them on AIRLine. Create, maintain, and review commissioning plans, commissioning switching programme, Inspection testing plans, and test forms. Be able to work effectively in a team or alone. Required Qualifications: You must have an Electrical Engineering HNC/HND. We are looking for a sound background in Primary Substation and Cable/OHL systems and experience of working in a project delivery environment. Hold a full AP status for a minimum of two Voltage levels. Is a member of the IET and holds Eng Tech status working towards IEng. Have a minimum of three years' Primary or Secondary Operational experience in the Primary and Secondary network of a DNO. Hold a NEBOSH safety General or Construction qualification. The role also requires organisational skills, attention to detail. The ability to manage multiple projects, meet deadlines, and interpersonal skills. Holds full driving license. Demonstrate excellent communication skills. A working knowledge of the safety & environmental regulations relating to construction work in the industry. Must have experience of working with the CDM regulations and ISO9001 quality processes. Understanding and application of UK Power Networks policies and procedures. Knowledge of, and Competent user of the Microsoft Office suite of applications (Outlook, Excel, Word and Project). Flexible attitude to work and working hours. An awareness of the sections business, financial, and regulatory obligations. Ability to build working relationships with colleagues and other teams within UKPN and with external partners. Ability to work as part of a highly focused team to meet tight deadlines and to work with others to achieve shared goals and optimise the contribution of the team. The ability to use own initiative to solve problems, be self-motivated with an ambition to achieve. Candidates that don't meet all the criteria may be considered subject to necessary training and formal qualifications. If you do not hold the relevant competencies, they may be placed on a lower Band with a development plan.
Jan 07, 2026
Full time
81515 - Commissioning Engineer This commissioning engineer role will report to the construction manager and will work within capital programme based in our eastern region across Hertfordshire, Essex and East Anglia. You will be a permanent employee in our UK Power Networks team. You will attract a salary of 80,574and a bonus of 3%. If you are successful, you will need to undertake a medical and DBS reference check Close Date: .25/01/2026 We also provide the following additional benefits 25 Days Annual Leave plus bank holidays. Reservist Leave - Additional 18 days full pay and 22 unpaid Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit Scheme, Season Ticket Loan Tax efficient benefits: Cycle to Work, Home & Tech, and Green Car Leasing Schemes Occupational Health support Switched On - scheme providing discount on hundreds of retailers' products Discounted gym membership Employee Assistance Programme Job Purpose: The Role of the Commissioning Engineer in the Capital Programme Operations Team is to ensure installations, plant and equipment are correctly tested and proven prior to being put into service. This includes management and supervision of a commissioning team. The Commissioning Engineer will provide advice on technical issues for projects within the Capital Programme portfolio. You will act as or work together with the Lead Commissioning Engineer in the delivery of the APP and Connections portfolio, providing assistance with technical issues, operational duties, management of commissioning plans, and liaison with contract commissioning engineers to ensure full compliance with UKPN Policies and Procedures. Dimensions: Liaison/coordination/cooperating with Programme managers to deliver the regional APP/Connections portfolio of circa 150M per year. Responsible for full compliance with UKPN policies and procedures. Responsible for signing off new multi-million-pound installations as fit for service. Responsible for operating the Network from an Authorised Person perspective up to and including 132kV. Principal Accountabilities: Help develop Multiple Projects from Gate A to close out Gate D. Manages a portfolio of multiple electrical projects. Provide Engineering, Safety, Management, and leadership to a group of contract commissioning engineers and Fitters as required. Co-ordinate with the Construction team and other stakeholders to ensure resources are in place to deliver the project. Actively develop staff by acting as a mentor and coach to assist in the team's authorisations development. Attend as required project specific meetings and project reviews, making sure UKPN standards are adhered to. Liaise as necessary on matters of Operational, plant and cable policy for delivery of several projects to time, quality, cost, maintaining the highest levels of safety and environmental management. To provide Input on Quality and Deliverability. Ensure commissioning assurance through audits on quality of work, technical competencies, adherence to specifications, compliance with testing and commissioning procedures, and safety and environmental procedures. Ensure the required project completion data gets completed and submitted for processing. Ensure compliance with CDM and Safety Documentation where required. Input into Project issues log and risk register. Ensure that all work is carried out to provide very high levels of Customer Service e.g. minimise CIs & CMLs, network risk, and customer complaints. Ensure that all workers engaged on the projects/portfolio of projects are fully aware of all safety and environmental requirements. Promote the company's values. Manage the commissioning drawings and test forms including as-built records. Main Duties: Manage every stage of the commissioning process from cold commissioning to energisation for a number of projects. Keep up to date with new relay and testing software to be able to install multiple items of equipment onto the network. Check and apply settings to complex relays. Drive complex testing equipment to be able to test and commission complex relay schemes. Commission Primary transformers, feeders, and primary plant onto the network. Review all designs before starting work to ensure compliance with current policies and procedures. Liaise with Project Managers, Designers and Surveyors to ensure workable designs are produced. Have input to the Hazard Elimination and Management Checklist (HEML). Supervise a team of electrical fitters whether UKPN staff or contractors where required. Attends meeting with stakeholders. Issue Safety documents in line with the DSRs, issue task instructions, and adhere to the Putting people To Work (PPTW) policy. Raise TQ's, CE and EWN issues that may affect project delivery and submit via Unifier. Provide guidance where appropriate and create solutions from a commissioning perspective for complex challenges. Ensure work is delivered to design and specification. Ensure suitable Risk Assessment and Method Statement (RAMS) and Safe System of work (SSOW) are in place for each task requiring operational precautions. Proactively seeking continuous improvement and development of others. Carries out Site and BE audits and records them on AIRLine. Create, maintain, and review commissioning plans, commissioning switching programme, Inspection testing plans, and test forms. Be able to work effectively in a team or alone. Required Qualifications: You must have an Electrical Engineering HNC/HND. We are looking for a sound background in Primary Substation and Cable/OHL systems and experience of working in a project delivery environment. Hold a full AP status for a minimum of two Voltage levels. Is a member of the IET and holds Eng Tech status working towards IEng. Have a minimum of three years' Primary or Secondary Operational experience in the Primary and Secondary network of a DNO. Hold a NEBOSH safety General or Construction qualification. The role also requires organisational skills, attention to detail. The ability to manage multiple projects, meet deadlines, and interpersonal skills. Holds full driving license. Demonstrate excellent communication skills. A working knowledge of the safety & environmental regulations relating to construction work in the industry. Must have experience of working with the CDM regulations and ISO9001 quality processes. Understanding and application of UK Power Networks policies and procedures. Knowledge of, and Competent user of the Microsoft Office suite of applications (Outlook, Excel, Word and Project). Flexible attitude to work and working hours. An awareness of the sections business, financial, and regulatory obligations. Ability to build working relationships with colleagues and other teams within UKPN and with external partners. Ability to work as part of a highly focused team to meet tight deadlines and to work with others to achieve shared goals and optimise the contribution of the team. The ability to use own initiative to solve problems, be self-motivated with an ambition to achieve. Candidates that don't meet all the criteria may be considered subject to necessary training and formal qualifications. If you do not hold the relevant competencies, they may be placed on a lower Band with a development plan.
Electrical Field Manager Basildon Permanent Competitive + Flexible Benefits Summary Freedom's Network Services team are looking for an Electrical Field Manager that can join an established team and hit the ground running. To manage/supervise all construction activity on underground cable installation and substation up to 132kv replacement work across Eastern Region of our operations covering various projects in UKPN. Must have electrical experience & knowledge of working within UKPN substation. Some of the key deliverables in this role will include: Survey work sites (prior, during and after) inc final re-measures to include and report to PM Plan works in field of expertise (Electrical/Civils) Effective planning and utilisation of staff. preview work areas prior to works commencing Compile job packs for setting teams to work Carry out forward planning to identify future resource needs Compiling and submitting Permits/PAIs Setting to work of staff and ensuring compliance against procedures Proactively managing H&S issues & concerns, working closely with Project Management, Design and Site Management staff so that an accident and incident free culture is maintained Maintain awareness of H&S policy and rules and keep up to date on changes that impact your role. Ensure compliance with CDM Regulations Motivate Field staff to deliver high quality work in a consistent manner Ensure all site documentation is compiled and returned to the project manager Ensure construction teams are equipped with the correct tools for the job - eg IT equipment, general and special tooling etc. What we're looking for: Experience of managing sites and field-based staff on high voltage cable and substation projects and U/G works Electrical knowledge HV, EHV of substation builds and replacement works NRSW IoSH - Managing Safety, OR SMSTS, SSSTS First aid, manual handling CDM awareness Good IT skills Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
Jan 07, 2026
Full time
Electrical Field Manager Basildon Permanent Competitive + Flexible Benefits Summary Freedom's Network Services team are looking for an Electrical Field Manager that can join an established team and hit the ground running. To manage/supervise all construction activity on underground cable installation and substation up to 132kv replacement work across Eastern Region of our operations covering various projects in UKPN. Must have electrical experience & knowledge of working within UKPN substation. Some of the key deliverables in this role will include: Survey work sites (prior, during and after) inc final re-measures to include and report to PM Plan works in field of expertise (Electrical/Civils) Effective planning and utilisation of staff. preview work areas prior to works commencing Compile job packs for setting teams to work Carry out forward planning to identify future resource needs Compiling and submitting Permits/PAIs Setting to work of staff and ensuring compliance against procedures Proactively managing H&S issues & concerns, working closely with Project Management, Design and Site Management staff so that an accident and incident free culture is maintained Maintain awareness of H&S policy and rules and keep up to date on changes that impact your role. Ensure compliance with CDM Regulations Motivate Field staff to deliver high quality work in a consistent manner Ensure all site documentation is compiled and returned to the project manager Ensure construction teams are equipped with the correct tools for the job - eg IT equipment, general and special tooling etc. What we're looking for: Experience of managing sites and field-based staff on high voltage cable and substation projects and U/G works Electrical knowledge HV, EHV of substation builds and replacement works NRSW IoSH - Managing Safety, OR SMSTS, SSSTS First aid, manual handling CDM awareness Good IT skills Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
Approved Electrician Reports To: Operations Manager Hours: Monday to Friday, 40 hours per week (on call rota for weekend working) Contract: Permanent Job Purpose: To carry out maintenance and remedial works on ground mount solar farms. The post holder will have a good working knowledge and experience of photovoltaic and ideally High voltage systems within the ground mount sector. You will demonstrate a good dexterity and confidence on using ac/dc electrical test equipment, to include mc4 crimpers and other tooling used within the solar PV industry. Key Responsibilities Includes: Installation of cabling and modules on the arrays. Terminate cables and connectors at DC and AC distribution boxes. Install cabling on monitoring and communication equipment (data logger, routers, sensors, etc.) Fault Identification on electrical components, comms equipment and monitoring equipment by means of testing. Carry out annual testing (String testing, DC main cable testing, IV curve testing and thermal imaging.) Carry out test and inspection of newly installed AC equipment in accordance with BS7671. Compile necessary reports and update the company's ticketing system. Manage Subcontractors onsite. Assist Asset/ Ops mangers with small works quotations. Work with electrical labourers, electricians, Asset & Site Managers. Carry out any H&S actions and routines as determined by client and company. Undertake any necessary training. Mentoring or Training other members of the team. Take part in the on-call rota for weekends. Skills and experience: Have an understanding of Microsoft Office, phone/tablet and document reporting structures. Have a basic understanding of Health & Safety standards and Regulations. At least two years working experience in the installation and maintenance of electrical systems for Solar PV sites. Hold a Level 3 Technical Certificate in Electrical Installation or equivalent. Hold a vocational qualification (NVQ LV3) in the electrical industry. National Electrotechnical Training (NET) AM2 certificate. Level3 BS7671:2018 (18th Ed). 2391 test and inspection desirable. ECS Electrician Card desirable. AP/SAP previous status desirable SMSTS desirable. HV/AP desirable. Benefits: Interesting projects in a future-oriented growth market Flexible working hours 24 days holiday + bank holidays Pension qualified earnings contributions through NEST scheme Private healthcare & Life Assurance A great team & flat hierarchies APPLICATION METHOD To Apply please send a CV to the following email address - - or click the Apply Now button and you will be redirected to complete the Application Process.
Jan 06, 2026
Full time
Approved Electrician Reports To: Operations Manager Hours: Monday to Friday, 40 hours per week (on call rota for weekend working) Contract: Permanent Job Purpose: To carry out maintenance and remedial works on ground mount solar farms. The post holder will have a good working knowledge and experience of photovoltaic and ideally High voltage systems within the ground mount sector. You will demonstrate a good dexterity and confidence on using ac/dc electrical test equipment, to include mc4 crimpers and other tooling used within the solar PV industry. Key Responsibilities Includes: Installation of cabling and modules on the arrays. Terminate cables and connectors at DC and AC distribution boxes. Install cabling on monitoring and communication equipment (data logger, routers, sensors, etc.) Fault Identification on electrical components, comms equipment and monitoring equipment by means of testing. Carry out annual testing (String testing, DC main cable testing, IV curve testing and thermal imaging.) Carry out test and inspection of newly installed AC equipment in accordance with BS7671. Compile necessary reports and update the company's ticketing system. Manage Subcontractors onsite. Assist Asset/ Ops mangers with small works quotations. Work with electrical labourers, electricians, Asset & Site Managers. Carry out any H&S actions and routines as determined by client and company. Undertake any necessary training. Mentoring or Training other members of the team. Take part in the on-call rota for weekends. Skills and experience: Have an understanding of Microsoft Office, phone/tablet and document reporting structures. Have a basic understanding of Health & Safety standards and Regulations. At least two years working experience in the installation and maintenance of electrical systems for Solar PV sites. Hold a Level 3 Technical Certificate in Electrical Installation or equivalent. Hold a vocational qualification (NVQ LV3) in the electrical industry. National Electrotechnical Training (NET) AM2 certificate. Level3 BS7671:2018 (18th Ed). 2391 test and inspection desirable. ECS Electrician Card desirable. AP/SAP previous status desirable SMSTS desirable. HV/AP desirable. Benefits: Interesting projects in a future-oriented growth market Flexible working hours 24 days holiday + bank holidays Pension qualified earnings contributions through NEST scheme Private healthcare & Life Assurance A great team & flat hierarchies APPLICATION METHOD To Apply please send a CV to the following email address - - or click the Apply Now button and you will be redirected to complete the Application Process.
Astute's Power Team is working with a leading provider of high-voltage infrastructure solutions, known for its dedication to safety, innovation, and professional growth, to recruit a High Voltage Testing & Commissioning Engineer for projects across the UK. This pivotal High Voltage Testing & Commissioning Engineer position offers a competitive salary (based on experience), pension scheme, company vehicle, travel allowances, and opportunities for further training and development. If you're a High Voltage Testing & Commissioning Engineer who wants to be part of an organisation that values people, integrity, and technical excellence, we'd love to hear from you. Apply today with your CV. Responsibilities and duties of the High Voltage Testing & Commissioning Engineer role Reporting to the Project Manager you will: Carry out testing and commissioning of high-voltage systems (up to 132kV+), including protection relay testing, SCADA integration, and both primary and secondary injection. Develop and deliver commissioning plans, method statements, risk assessments, and switching schedules. Work closely with SAPs, project managers, and clients to ensure smooth project delivery. Identify and resolve technical issues on-site, ensuring compliance with industry standards. Produce accurate records, reports, and documentation for all commissioning activities. Provide guidance to junior engineers and support continuous improvements across projects. Professional qualifications We are looking for someone with the following: HNC/HND or Degree in Electrical Engineering (or similar discipline). Solid experience in HV commissioning within utilities, renewables, or substations. Competence with test equipment and systems such as Omicron, Megger, Micom, Siemens, ABB, Schneider, etc. Current authorisations under industry safety rules (e.g., TP141, National Grid, SSE). Strong knowledge of Safe Systems of Work and RAMS. Offshore background and GWO certifications. Knowledge of SCADA systems and fibre optic intertrip protection. Excellent technical communication and reporting skills. Personal skills The High Voltage Testing & Commissioning Engineer role would suit someone who is: Diligent, safety-minded, and highly organised. Able to adapt quickly and work effectively in fast-paced environments. Comfortable collaborating with colleagues and clients at all levels. Proactive in problem-solving with a hands-on approach. Keen to support and mentor others within the team. Salary and benefits of the High Voltage Testing & Commissioning Engineer role A competitive salary package, tailored to your experience. Company vehicle and travel allowances. Pension scheme. Ongoing professional training and career development opportunities A supportive environment where safety and quality are always prioritised. INDPOW Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Oct 29, 2025
Full time
Astute's Power Team is working with a leading provider of high-voltage infrastructure solutions, known for its dedication to safety, innovation, and professional growth, to recruit a High Voltage Testing & Commissioning Engineer for projects across the UK. This pivotal High Voltage Testing & Commissioning Engineer position offers a competitive salary (based on experience), pension scheme, company vehicle, travel allowances, and opportunities for further training and development. If you're a High Voltage Testing & Commissioning Engineer who wants to be part of an organisation that values people, integrity, and technical excellence, we'd love to hear from you. Apply today with your CV. Responsibilities and duties of the High Voltage Testing & Commissioning Engineer role Reporting to the Project Manager you will: Carry out testing and commissioning of high-voltage systems (up to 132kV+), including protection relay testing, SCADA integration, and both primary and secondary injection. Develop and deliver commissioning plans, method statements, risk assessments, and switching schedules. Work closely with SAPs, project managers, and clients to ensure smooth project delivery. Identify and resolve technical issues on-site, ensuring compliance with industry standards. Produce accurate records, reports, and documentation for all commissioning activities. Provide guidance to junior engineers and support continuous improvements across projects. Professional qualifications We are looking for someone with the following: HNC/HND or Degree in Electrical Engineering (or similar discipline). Solid experience in HV commissioning within utilities, renewables, or substations. Competence with test equipment and systems such as Omicron, Megger, Micom, Siemens, ABB, Schneider, etc. Current authorisations under industry safety rules (e.g., TP141, National Grid, SSE). Strong knowledge of Safe Systems of Work and RAMS. Offshore background and GWO certifications. Knowledge of SCADA systems and fibre optic intertrip protection. Excellent technical communication and reporting skills. Personal skills The High Voltage Testing & Commissioning Engineer role would suit someone who is: Diligent, safety-minded, and highly organised. Able to adapt quickly and work effectively in fast-paced environments. Comfortable collaborating with colleagues and clients at all levels. Proactive in problem-solving with a hands-on approach. Keen to support and mentor others within the team. Salary and benefits of the High Voltage Testing & Commissioning Engineer role A competitive salary package, tailored to your experience. Company vehicle and travel allowances. Pension scheme. Ongoing professional training and career development opportunities A supportive environment where safety and quality are always prioritised. INDPOW Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Bennett and Game Recruitment LTD
Bedford, Bedfordshire
Installation engineer required to join a well-established Engineering company that is based in the Bedford area. The successful candidate will be expected to lead the installation, commissioning, and support of bespoke electromechanical systems for high-end residential, marine and commercial projects. These projects demand technical precision, a high level of craftsmanship, and the ability to work within architecturally sensitive environments. This hybrid role combines hands-on installation at client sites with preparation, testing, and documentation development within our in-house manufacturing and assembly facility. Installation Engineer Job Overview Assemble, test, disassemble and prepare bespoke electromechanical systems at our manufacturing facility prior to site installation. Install, commission, and fine-tune custom electromechanical and automated systems at luxury residential, marine and commercial sites. Collaborate with engineering and production teams to prepare, assemble, and test systems prior to deployment. Interpret and contribute to technical documentation, including mechanical drawings, assembly notes, electrical schematics, and architectural layouts. Develop and maintain clear and concise technical support documents, installation manuals, checklists, and troubleshooting guides for internal and client use. Work with precision components, motorised mechanisms, and automation/control systems to create robust, reliable and safe solutions for high end clients. Coordinate on-site activities with external project managers, site supervisors, and subcontractors to ensure efficient installations with minimal disruption. Perform diagnostics and troubleshooting during and post-installation; propose solutions and implement corrective actions quickly. Deliver on-site training and technical guidance to clients, end users, and maintenance teams. Maintain accurate records of installations, configurations, modifications, and customer interactions. Uphold all safety standards and site protocols, particularly when working in active construction or finished luxury environments. Installation Engineer Job Requirements BTEC, HNC/HND, NVQ Level 3, or degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or a related field. Minimum 5 years' experience assembling, installing and commissioning electromechanical or automation systems. Knowledge of Mechanical assemblies at component and sub-assembly levels. Knowledge of High and low-voltage electrical systems and control wiring PLCs, HMIs, sensors, actuators, and DC motor control experience would be advantageous Installation Engineer Salary & Benefits Permanent position Salary - 35,000 - 45,000 (DOE) 25 days annual leave + bank holidays Pension scheme - we pay 8% following a 3-month probation completion Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Oct 07, 2025
Full time
Installation engineer required to join a well-established Engineering company that is based in the Bedford area. The successful candidate will be expected to lead the installation, commissioning, and support of bespoke electromechanical systems for high-end residential, marine and commercial projects. These projects demand technical precision, a high level of craftsmanship, and the ability to work within architecturally sensitive environments. This hybrid role combines hands-on installation at client sites with preparation, testing, and documentation development within our in-house manufacturing and assembly facility. Installation Engineer Job Overview Assemble, test, disassemble and prepare bespoke electromechanical systems at our manufacturing facility prior to site installation. Install, commission, and fine-tune custom electromechanical and automated systems at luxury residential, marine and commercial sites. Collaborate with engineering and production teams to prepare, assemble, and test systems prior to deployment. Interpret and contribute to technical documentation, including mechanical drawings, assembly notes, electrical schematics, and architectural layouts. Develop and maintain clear and concise technical support documents, installation manuals, checklists, and troubleshooting guides for internal and client use. Work with precision components, motorised mechanisms, and automation/control systems to create robust, reliable and safe solutions for high end clients. Coordinate on-site activities with external project managers, site supervisors, and subcontractors to ensure efficient installations with minimal disruption. Perform diagnostics and troubleshooting during and post-installation; propose solutions and implement corrective actions quickly. Deliver on-site training and technical guidance to clients, end users, and maintenance teams. Maintain accurate records of installations, configurations, modifications, and customer interactions. Uphold all safety standards and site protocols, particularly when working in active construction or finished luxury environments. Installation Engineer Job Requirements BTEC, HNC/HND, NVQ Level 3, or degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or a related field. Minimum 5 years' experience assembling, installing and commissioning electromechanical or automation systems. Knowledge of Mechanical assemblies at component and sub-assembly levels. Knowledge of High and low-voltage electrical systems and control wiring PLCs, HMIs, sensors, actuators, and DC motor control experience would be advantageous Installation Engineer Salary & Benefits Permanent position Salary - 35,000 - 45,000 (DOE) 25 days annual leave + bank holidays Pension scheme - we pay 8% following a 3-month probation completion Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Quantity Surveyor City of London £85,000 Are you an experienced Quantity Surveyor looking for your next high-profile project? An opportunity is now available to take full commercial ownership of two major ELVS packages in the heart of the City of London. If you thrive in fast-paced environments and enjoy working on technically complex projects, this role could be your perfect next step. The Quantity Surveyor position You ll be joining a dynamic team delivering two flagship Extra-Low Voltage Systems (ELVS) projects. These packages include Building Management Systems (BMS), Energy Management Systems (EMS), Security, Converged Network Systems (CNS), Smart Technologies and Master System Integrator (MSI) works. Reporting to the Project Director and Commercial Manager, you ll ensure robust cost control, contract compliance and financial forecasting from mobilisation to final account. About the company Our client is a leader in intelligent building technologies, delivering cutting-edge ELVS and MEP packages across landmark developments in London. With a track record of innovation and technical excellence, they offer a progressive working culture on some of the capital s most exciting projects. Key responsibilities Manage all commercial aspects of both projects including CVRs, forecasts, variations, and final accounts Submit applications for payment, with breakdowns by package and discipline Administer Early Warning Notices, Delay Notices, and Extension of Time claims in line with contract provisions Produce monthly cost reports, monitor expenditure, and highlight budget/programme variances Support the project team with variation pricing and rate validation Lead commercial reviews and contribute to forecast updates Liaise with internal teams, clients and subcontractors to maintain clear commercial communication Attend progress meetings, providing accurate financial reporting and analysis Interface with the programme team to align commercial actions with project milestones Skills and experience required Essential: Chartered (RICS, CIOB or equivalent) Proven experience managing multi-discipline ELVS or MEP packages (BMS, EMS, Security, CNS, Smart, MSI) In-depth knowledge of NEC3/NEC4 or JCT contracts Strong forecasting and commercial reporting capabilities Familiarity with commercial software (e.g. Asta, COINS or equivalent) Desirable: Background in large-scale, high-value city-based projects Understanding of energy-efficient building systems and smart technologies Salary and benefits Competitive salary, dependent on experience BUPA Health Insurance after 6 months probation is passed. Holiday entitlement will be 25 days excluding Bank Holidays Company pension, employer contributes 5% and employee contributions of 3% Working hours: Location: City of London (office/site-based) Hours: 08 00 Start Date: ASAP (subject to notice period) Personal profile You re commercially astute, detail-focused and a confident communicator who can work across technical and financial disciplines. You thrive on complex work, enjoy stakeholder engagement and bring a solution-focused mindset to every challenge. Your ability to manage competing priorities while maintaining high standards makes you a valuable asset to any major project team. Do you think you could be our next Quantity Surveyor? For more information on this fantastic opportunity, please call Yvonne Ndlovu at Team BMS on (phone number removed), or click Apply now .
Oct 06, 2025
Full time
Quantity Surveyor City of London £85,000 Are you an experienced Quantity Surveyor looking for your next high-profile project? An opportunity is now available to take full commercial ownership of two major ELVS packages in the heart of the City of London. If you thrive in fast-paced environments and enjoy working on technically complex projects, this role could be your perfect next step. The Quantity Surveyor position You ll be joining a dynamic team delivering two flagship Extra-Low Voltage Systems (ELVS) projects. These packages include Building Management Systems (BMS), Energy Management Systems (EMS), Security, Converged Network Systems (CNS), Smart Technologies and Master System Integrator (MSI) works. Reporting to the Project Director and Commercial Manager, you ll ensure robust cost control, contract compliance and financial forecasting from mobilisation to final account. About the company Our client is a leader in intelligent building technologies, delivering cutting-edge ELVS and MEP packages across landmark developments in London. With a track record of innovation and technical excellence, they offer a progressive working culture on some of the capital s most exciting projects. Key responsibilities Manage all commercial aspects of both projects including CVRs, forecasts, variations, and final accounts Submit applications for payment, with breakdowns by package and discipline Administer Early Warning Notices, Delay Notices, and Extension of Time claims in line with contract provisions Produce monthly cost reports, monitor expenditure, and highlight budget/programme variances Support the project team with variation pricing and rate validation Lead commercial reviews and contribute to forecast updates Liaise with internal teams, clients and subcontractors to maintain clear commercial communication Attend progress meetings, providing accurate financial reporting and analysis Interface with the programme team to align commercial actions with project milestones Skills and experience required Essential: Chartered (RICS, CIOB or equivalent) Proven experience managing multi-discipline ELVS or MEP packages (BMS, EMS, Security, CNS, Smart, MSI) In-depth knowledge of NEC3/NEC4 or JCT contracts Strong forecasting and commercial reporting capabilities Familiarity with commercial software (e.g. Asta, COINS or equivalent) Desirable: Background in large-scale, high-value city-based projects Understanding of energy-efficient building systems and smart technologies Salary and benefits Competitive salary, dependent on experience BUPA Health Insurance after 6 months probation is passed. Holiday entitlement will be 25 days excluding Bank Holidays Company pension, employer contributes 5% and employee contributions of 3% Working hours: Location: City of London (office/site-based) Hours: 08 00 Start Date: ASAP (subject to notice period) Personal profile You re commercially astute, detail-focused and a confident communicator who can work across technical and financial disciplines. You thrive on complex work, enjoy stakeholder engagement and bring a solution-focused mindset to every challenge. Your ability to manage competing priorities while maintaining high standards makes you a valuable asset to any major project team. Do you think you could be our next Quantity Surveyor? For more information on this fantastic opportunity, please call Yvonne Ndlovu at Team BMS on (phone number removed), or click Apply now .
Were seeking a skilled Quality Lead to join our Energy division, taking ownership of quality assurance on the UK Power Networks (UKPN) framework. This pivotal position will see you set and maintain quality benchmarks across a range of high-voltage and substation projects. Working as part of a supportive, results-driven team, youll make sure all works are delivered in line with both contractual obli click apply for full job details
Oct 06, 2025
Full time
Were seeking a skilled Quality Lead to join our Energy division, taking ownership of quality assurance on the UK Power Networks (UKPN) framework. This pivotal position will see you set and maintain quality benchmarks across a range of high-voltage and substation projects. Working as part of a supportive, results-driven team, youll make sure all works are delivered in line with both contractual obli click apply for full job details
Rise Technical Recruitment
St. Albans, Hertfordshire
HV Project Manager South East 60,000 - 85,000 + Bonus + Progression + Pension + Holiday Are you a Project Manager with experience working on electricity distribution networks and looking for a role with extensive progression opportunities? Do you want to work for a brand new division within a massively growing company, with solid financial backing, who are disrupting the status quo in the electricity connections market? This company are a leading IDNO who due to recent investment and financial backing are seeing a period of substantial on-going growth. They have established themselves at the forefront of the market and are now poised to capitalise on that as they drive forward with their strategic business plan. Due to this ongoing growth and demand they are looking to bring in an additional Project Manager to help them drive the business forward. In this role, you will be based from home, with visits to the company offices in London, Buckinghamshire and to travel to project sites. You will be responsible for overseeing the delivery of high voltage projects up to 132kV, through the full process from conception to energisation and adoption. The role will require constant liaising between, ICPs, ECPs, Customers, Developers, Suppliers and, Network Operators to ensure all stage gates are met and ensuring projects are delivered on time. This role is to work within a newly created team within the business meaning as the division continues to grow and the team expands there will be plenty of opportunities to climb the ladder and take on more responsibility. This is a fantastic opportunity for someone with high voltage experience to join a market leading company at a very exciting time in their growth trajectory. The Role: Full lifecycle project management from concept to energisation and handover Working on electricity distribution networks up to 132kV Liaising with all internal and external stakeholders to ensure successful project delivery The Person: Experience within grid connections, high voltage or, electricity distribution network projects Project manager with APM or equivalent qualification Full lifecycle project experience covering construction, commissioning, energisation and, handover Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Jeremy Nicholls at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Oct 04, 2025
Full time
HV Project Manager South East 60,000 - 85,000 + Bonus + Progression + Pension + Holiday Are you a Project Manager with experience working on electricity distribution networks and looking for a role with extensive progression opportunities? Do you want to work for a brand new division within a massively growing company, with solid financial backing, who are disrupting the status quo in the electricity connections market? This company are a leading IDNO who due to recent investment and financial backing are seeing a period of substantial on-going growth. They have established themselves at the forefront of the market and are now poised to capitalise on that as they drive forward with their strategic business plan. Due to this ongoing growth and demand they are looking to bring in an additional Project Manager to help them drive the business forward. In this role, you will be based from home, with visits to the company offices in London, Buckinghamshire and to travel to project sites. You will be responsible for overseeing the delivery of high voltage projects up to 132kV, through the full process from conception to energisation and adoption. The role will require constant liaising between, ICPs, ECPs, Customers, Developers, Suppliers and, Network Operators to ensure all stage gates are met and ensuring projects are delivered on time. This role is to work within a newly created team within the business meaning as the division continues to grow and the team expands there will be plenty of opportunities to climb the ladder and take on more responsibility. This is a fantastic opportunity for someone with high voltage experience to join a market leading company at a very exciting time in their growth trajectory. The Role: Full lifecycle project management from concept to energisation and handover Working on electricity distribution networks up to 132kV Liaising with all internal and external stakeholders to ensure successful project delivery The Person: Experience within grid connections, high voltage or, electricity distribution network projects Project manager with APM or equivalent qualification Full lifecycle project experience covering construction, commissioning, energisation and, handover Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Jeremy Nicholls at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
About The Role Job Summary: We are looking for a site manager to oversee and coordinate all on-site activities related to High Voltage (HV) electrical infrastructure projects . The site manager will be responsible for ensuring that all HV construction works are executed safely, on schedule with programme, within budget, and to the highest quality standards. This role requires deep knowledge of high voltage systems (typically 11kV to 132kV), strong leadership skills, and strict adherence to industry safety and regulatory standards.Location - Sites located across the South of England - travel will be required to various locations as needed. Key Responsibilities: Liaising with all stakeholders to manage all construction activities, including progressing of programmes, risk assessments and method statements. Holding Competent Person status (CP) administering the Electrical Safety Rules (ESR) and ensuring safety process are upheld onsite Liaising with all Client Operations Teams throughout the construction phase. Receiving, managing and issuing drawings for construction at site level, checking construction meets the requirements of design. Working with the team members to ensure delivery on site is done safely, efficiently and is compliant. Monitor site progress, manage schedules, and mitigate any potential risks or delays. Managing sub-contractor onsite activities. Managing internal direct reports for Construction team. Providing input into design reviews as and when required. Plan in advance, provision of all documentation, resources, tools, materials, consumables H&S equipment and transport, to ensure safe and efficient construction. Demonstrate this planning by providing a 1-week and 4-week lookahead. Managing and co-ordinating site Acceptance Testing as required. Managing the delivery of all 'As-Built' documentation throughout the onsite construction & commissioning phases. Conduct weekly project site reports and updates Completing site audits and inspections when required, ensuring the highest standard of quality is maintained. Qualifications: City and Guilds in Electrical engineering or a related field or relevant knowledge and experience in a similar role SMSTS (Site Management Safety Training Scheme) Previous DNO authorisation to take and receive permits. We require our operatives and site managers to have authorisation to be able to both access the sites and provide access to clients, subcontractors etc Experience: Extensive experience of working in a Live Open Busbar compound Indirectly leading and influencing people/teams from other functions Working to tight deadlines Practical experience of supervising work within a CDM environment. Skills: Excellent interpersonal and communication skills. Commercial awareness is essential Mathematical skills and the ability to apply them to solve problems. Leadership and managerial skills. Controlling documentation (Setting to work, Daily Briefs, Minutes, ITPs etc) The ability to work well under pressure and deal with unexpected change. Teamworking skills. Technical expertise. Good IT and analytical skills. About The OrganisationKUS Power Engineering, part of the BRUSH Group, is a design and build, high voltage, electrical contractor committed to outstanding customer service and the safe delivery of turnkey substation projects from 11kV to 275kV.With a proven track record of quality outcomes, KUS Power Engineering deliver contracting services to some of the largest organisations in the industry, seamlessly managing the design and delivery of a package of works while ensuring their timely commercial closeout.
Oct 04, 2025
Full time
About The Role Job Summary: We are looking for a site manager to oversee and coordinate all on-site activities related to High Voltage (HV) electrical infrastructure projects . The site manager will be responsible for ensuring that all HV construction works are executed safely, on schedule with programme, within budget, and to the highest quality standards. This role requires deep knowledge of high voltage systems (typically 11kV to 132kV), strong leadership skills, and strict adherence to industry safety and regulatory standards.Location - Sites located across the South of England - travel will be required to various locations as needed. Key Responsibilities: Liaising with all stakeholders to manage all construction activities, including progressing of programmes, risk assessments and method statements. Holding Competent Person status (CP) administering the Electrical Safety Rules (ESR) and ensuring safety process are upheld onsite Liaising with all Client Operations Teams throughout the construction phase. Receiving, managing and issuing drawings for construction at site level, checking construction meets the requirements of design. Working with the team members to ensure delivery on site is done safely, efficiently and is compliant. Monitor site progress, manage schedules, and mitigate any potential risks or delays. Managing sub-contractor onsite activities. Managing internal direct reports for Construction team. Providing input into design reviews as and when required. Plan in advance, provision of all documentation, resources, tools, materials, consumables H&S equipment and transport, to ensure safe and efficient construction. Demonstrate this planning by providing a 1-week and 4-week lookahead. Managing and co-ordinating site Acceptance Testing as required. Managing the delivery of all 'As-Built' documentation throughout the onsite construction & commissioning phases. Conduct weekly project site reports and updates Completing site audits and inspections when required, ensuring the highest standard of quality is maintained. Qualifications: City and Guilds in Electrical engineering or a related field or relevant knowledge and experience in a similar role SMSTS (Site Management Safety Training Scheme) Previous DNO authorisation to take and receive permits. We require our operatives and site managers to have authorisation to be able to both access the sites and provide access to clients, subcontractors etc Experience: Extensive experience of working in a Live Open Busbar compound Indirectly leading and influencing people/teams from other functions Working to tight deadlines Practical experience of supervising work within a CDM environment. Skills: Excellent interpersonal and communication skills. Commercial awareness is essential Mathematical skills and the ability to apply them to solve problems. Leadership and managerial skills. Controlling documentation (Setting to work, Daily Briefs, Minutes, ITPs etc) The ability to work well under pressure and deal with unexpected change. Teamworking skills. Technical expertise. Good IT and analytical skills. About The OrganisationKUS Power Engineering, part of the BRUSH Group, is a design and build, high voltage, electrical contractor committed to outstanding customer service and the safe delivery of turnkey substation projects from 11kV to 275kV.With a proven track record of quality outcomes, KUS Power Engineering deliver contracting services to some of the largest organisations in the industry, seamlessly managing the design and delivery of a package of works while ensuring their timely commercial closeout.
Technical Manager / Technical Lead / Electrical Engineering Manager required to join a global manufacturer. The successful Technical Manager / Technical Lead / Electrical Engineering Manager will take ownership of complex engineering projects from design through to delivery, combining strong technical expertise with leadership, cross-functional collaboration, and a focus on power continuity, electrical distribution, and energy management systems. Technical Manager / Technical Lead / Electrical Engineering Manager will ideally have a solid foundation in electrical engineering, hands-on experience in power systems or industrial electrical environments, and a proven ability to lead technical teams, support client requirements, and deliver compliant, high-performing solutions. Package 80,000 per annum Bonus: 12.5% variable pay Car allowance: 596 per month Pension Healthcare Additional benefits Technical Manager / Technical Lead / Electrical Engineering Manager Role Deliver technical leadership and support across a wide range of electrical infrastructure projects, from early-stage specification through to commissioning and post-implementation support. Interpret electrical drawings, schematics, and technical documentation to advise on appropriate system solutions across backup power, distribution, switching, energy monitoring, and control. Manage and develop a multi-disciplinary team of engineers and commercial support staff, driving performance and ensuring alignment with project delivery goals. Act as a key point of contact for consultants, contractors, and end-users, supporting technical sales processes and helping influence project specifications. Coordinate with internal engineering, product, and operations teams to ensure the integrity and compliance of delivered systems. Office-based near Swindon with regular UK-wide travel to client sites as required. Technical Manager / Technical Lead / Electrical Engineering Manager Requirements Strong technical grounding in electrical engineering principles, systems integration, and compliance within industrial or commercial environments. Proven leadership experience managing engineering teams within the power, infrastructure, or similar sectors. Practical knowledge of systems including backup power (e.g. UPS or generator-based), low-voltage distribution, switching devices, control panels, and energy monitoring platforms. Experience working with consulting engineers, main contractors, or facilities teams to deliver robust technical solutions. Degree-qualified (BEng, MSc, HNC) in Electrical or Power Engineering, or equivalent practical experience in a senior technical role. Comfortable with regular UK travel and engaging with customers in project and technical settings.
Oct 04, 2025
Full time
Technical Manager / Technical Lead / Electrical Engineering Manager required to join a global manufacturer. The successful Technical Manager / Technical Lead / Electrical Engineering Manager will take ownership of complex engineering projects from design through to delivery, combining strong technical expertise with leadership, cross-functional collaboration, and a focus on power continuity, electrical distribution, and energy management systems. Technical Manager / Technical Lead / Electrical Engineering Manager will ideally have a solid foundation in electrical engineering, hands-on experience in power systems or industrial electrical environments, and a proven ability to lead technical teams, support client requirements, and deliver compliant, high-performing solutions. Package 80,000 per annum Bonus: 12.5% variable pay Car allowance: 596 per month Pension Healthcare Additional benefits Technical Manager / Technical Lead / Electrical Engineering Manager Role Deliver technical leadership and support across a wide range of electrical infrastructure projects, from early-stage specification through to commissioning and post-implementation support. Interpret electrical drawings, schematics, and technical documentation to advise on appropriate system solutions across backup power, distribution, switching, energy monitoring, and control. Manage and develop a multi-disciplinary team of engineers and commercial support staff, driving performance and ensuring alignment with project delivery goals. Act as a key point of contact for consultants, contractors, and end-users, supporting technical sales processes and helping influence project specifications. Coordinate with internal engineering, product, and operations teams to ensure the integrity and compliance of delivered systems. Office-based near Swindon with regular UK-wide travel to client sites as required. Technical Manager / Technical Lead / Electrical Engineering Manager Requirements Strong technical grounding in electrical engineering principles, systems integration, and compliance within industrial or commercial environments. Proven leadership experience managing engineering teams within the power, infrastructure, or similar sectors. Practical knowledge of systems including backup power (e.g. UPS or generator-based), low-voltage distribution, switching devices, control panels, and energy monitoring platforms. Experience working with consulting engineers, main contractors, or facilities teams to deliver robust technical solutions. Degree-qualified (BEng, MSc, HNC) in Electrical or Power Engineering, or equivalent practical experience in a senior technical role. Comfortable with regular UK travel and engaging with customers in project and technical settings.
Electrical Site Manager Your new company This organisation is a leading force in the UK's built environment, delivering complex infrastructure and construction projects across sectors including transport, defence, education, real estate, and water. With a workforce of over 3,000 specialists nationwide, they are known for shaping sustainable, high-impact solutions that improve how people live, work, and connect. Employees benefit from a progressive and inclusive culture that encourages learning, development, and meaningful contribution. Whether delivering iconic city projects or pioneering low-carbon infrastructure, this is an organisation where purpose-driven professionals can thrive and make a lasting impact. Your new role Working on a large live NHS hospital site, this project is a major refurbishment and upgrade of two existing substations. One low voltage and one high voltage. We are seeking an experienced Electrical Site Manager to lead the on-site delivery of this project. You will be responsible for managing the various subcontractors on site with a key focus on health and safety. This role is very complex, and you'll be involved in the termination through to the recommissioning of high voltage (HV) switchgear, low voltage (LV) transformer busbars, and associated electrical infrastructure. The successful candidate will be responsible for managing subcontractors, ensuring compliance with safety and quality standards, and driving the project to meet key milestones with the project projected to last 12 months. Key Responsibilities: Site Management & Coordination. Supervise installation, testing, and commissioning of HV switchgear and LV transformer busbars. Ensure all electrical work complies with relevant standards. Review and approve method statements, risk assessments, and technical documentation. Manage subcontractor performance, ensuring quality construction and adherence to timelines. Review subcontractor scopes, monitor resource allocation, and resolve conflicts or delays. Enforce strict adherence to health and safety regulations on site. Lead toolbox talks, site inductions, and safety audits. Ensure all personnel are trained and certified for HV/LV work. Maintain accurate site records, including daily logs, inspection reports, and progress updates. Report regularly to the Project Manager on status, risks, and mitigation strategies. What you'll need to succeed 18th Edition Wiring Regulations certification. Substation experience (busbars/transformers/switchgear/HV/LV) Proven Electrical Engineering experience linked to the job role. Proven track record of an Electrical Site Manager on a similar project. Strong understanding of health & safety and compliance requirements. Excellent communication and organisational skills. Full UK Driving Licence SMSTS certification IOSH or NEBOSH What you'll get in return £220 - £350 day rate (PAYE or Umbrella) Opportunity to work on a prestigious project with an industry-leading organisation. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
Oct 03, 2025
Full time
Electrical Site Manager Your new company This organisation is a leading force in the UK's built environment, delivering complex infrastructure and construction projects across sectors including transport, defence, education, real estate, and water. With a workforce of over 3,000 specialists nationwide, they are known for shaping sustainable, high-impact solutions that improve how people live, work, and connect. Employees benefit from a progressive and inclusive culture that encourages learning, development, and meaningful contribution. Whether delivering iconic city projects or pioneering low-carbon infrastructure, this is an organisation where purpose-driven professionals can thrive and make a lasting impact. Your new role Working on a large live NHS hospital site, this project is a major refurbishment and upgrade of two existing substations. One low voltage and one high voltage. We are seeking an experienced Electrical Site Manager to lead the on-site delivery of this project. You will be responsible for managing the various subcontractors on site with a key focus on health and safety. This role is very complex, and you'll be involved in the termination through to the recommissioning of high voltage (HV) switchgear, low voltage (LV) transformer busbars, and associated electrical infrastructure. The successful candidate will be responsible for managing subcontractors, ensuring compliance with safety and quality standards, and driving the project to meet key milestones with the project projected to last 12 months. Key Responsibilities: Site Management & Coordination. Supervise installation, testing, and commissioning of HV switchgear and LV transformer busbars. Ensure all electrical work complies with relevant standards. Review and approve method statements, risk assessments, and technical documentation. Manage subcontractor performance, ensuring quality construction and adherence to timelines. Review subcontractor scopes, monitor resource allocation, and resolve conflicts or delays. Enforce strict adherence to health and safety regulations on site. Lead toolbox talks, site inductions, and safety audits. Ensure all personnel are trained and certified for HV/LV work. Maintain accurate site records, including daily logs, inspection reports, and progress updates. Report regularly to the Project Manager on status, risks, and mitigation strategies. What you'll need to succeed 18th Edition Wiring Regulations certification. Substation experience (busbars/transformers/switchgear/HV/LV) Proven Electrical Engineering experience linked to the job role. Proven track record of an Electrical Site Manager on a similar project. Strong understanding of health & safety and compliance requirements. Excellent communication and organisational skills. Full UK Driving Licence SMSTS certification IOSH or NEBOSH What you'll get in return £220 - £350 day rate (PAYE or Umbrella) Opportunity to work on a prestigious project with an industry-leading organisation. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
Design Manager - Central London Offering Circa. £60,000 - £80,000 Basic Salary plus Excellent Benefits! Our client is focused on driving the transition to a sustainable energy future. Currently recruiting a Design Manager who will be responsible for reviewing and ensuring the sufficiency of design and quality control documentation for a variety of Battery Energy Storage System (BESS) sites across Europe. The ideal candidate will have proven experience performing and managing the review of designs for high voltage construction projects such as renewable energy projects, BESS, substations, or similar, from a Distribution Network Operator, Owner's Engineer, contractor or developer's perspective. The Design Manager requires an individual to be technically competent with excellent communication skills, is able to distinguish high priority issues with clarity, and manage their identification and resolution in a variety of settings (different countries, contractors, contractual arrangements, etc.). Design Manager - Key responsibilities Agree the right design review strategy for each project and lead the review of all design submissions from contractors and other project stakeholders (DNO, TSO, etc.), ensuring they meet project requirements and ensuring adherence to relevant norms and standards for projects Proactively identify and prioritise important issues, identify required documentation and required submission dates to ensure interfaces between equipment and works of different parties can be clarified, and any review processes completed without impacting the project timeline Coordinate with external owner's engineers and specialists for supplementary design reviews or technical support where necessary Play a key role in the development of Requests for Proposals (RFPs) and technical specifications for equipment and works, ideally including HV equipment (such as transformers up to 400kV) Provide input to project's quality management plans and define quality requirements for projects Review as-built documentation at project completion to confirm its accuracy and completeness Actively participate in project meetings and lessons-learned workshops to contribute to the continuous improvement of internal processes and standards Support the asset management team by documenting and capturing any design modifications made during the operational phase of projects Establish and maintain a consistent design and documentation methodology to be applied across all European projects, while accommodating market-specific requirements Oversee the central management, collation, and organisation of technical documentation Capacity building and support of the development team to ensure that designs submitted for permitting are realistic and constructible Design Manager - Experience and skills Engineering degree or equivalent, preferably electrical engineering or related Experience with large scale electricity projects required, experience with HV grid connections and/or BESS projects desirable Familiarity with relevant norms and standards Ability to discuss technical aspects of all engineering disciplines (civil, electrical, controls, etc.) Experience carrying out design reviews, ideally working with/for Owner's Engineers Competency with AutoCAD software (for review purposes), document management systems, and standard office software Ability to coordinate and communicate with a wide range of stakeholders, including internal teams, external contractors, technical advisors, and regulatory bodies Willingness for occasional travel to project sites or international offices Highly organised, attention to detail, a problem-solving mindset and commercial acumen The Design Manager position is offering Circa. £60,000 - £80,000 basic salary plus excellent benefits for the successful candidate. This is a full-time, permanent, hybrid position offering flexibility to work 3 days per week at our client's office in the central London. All successful candidates will be contacted within 5 days of application for the position of Design Manager. This vacancy is being advertised by Technical Prospects Ltd. The services advertised by Technical Prospects Ltd are those of an Employment Agency.
Oct 02, 2025
Full time
Design Manager - Central London Offering Circa. £60,000 - £80,000 Basic Salary plus Excellent Benefits! Our client is focused on driving the transition to a sustainable energy future. Currently recruiting a Design Manager who will be responsible for reviewing and ensuring the sufficiency of design and quality control documentation for a variety of Battery Energy Storage System (BESS) sites across Europe. The ideal candidate will have proven experience performing and managing the review of designs for high voltage construction projects such as renewable energy projects, BESS, substations, or similar, from a Distribution Network Operator, Owner's Engineer, contractor or developer's perspective. The Design Manager requires an individual to be technically competent with excellent communication skills, is able to distinguish high priority issues with clarity, and manage their identification and resolution in a variety of settings (different countries, contractors, contractual arrangements, etc.). Design Manager - Key responsibilities Agree the right design review strategy for each project and lead the review of all design submissions from contractors and other project stakeholders (DNO, TSO, etc.), ensuring they meet project requirements and ensuring adherence to relevant norms and standards for projects Proactively identify and prioritise important issues, identify required documentation and required submission dates to ensure interfaces between equipment and works of different parties can be clarified, and any review processes completed without impacting the project timeline Coordinate with external owner's engineers and specialists for supplementary design reviews or technical support where necessary Play a key role in the development of Requests for Proposals (RFPs) and technical specifications for equipment and works, ideally including HV equipment (such as transformers up to 400kV) Provide input to project's quality management plans and define quality requirements for projects Review as-built documentation at project completion to confirm its accuracy and completeness Actively participate in project meetings and lessons-learned workshops to contribute to the continuous improvement of internal processes and standards Support the asset management team by documenting and capturing any design modifications made during the operational phase of projects Establish and maintain a consistent design and documentation methodology to be applied across all European projects, while accommodating market-specific requirements Oversee the central management, collation, and organisation of technical documentation Capacity building and support of the development team to ensure that designs submitted for permitting are realistic and constructible Design Manager - Experience and skills Engineering degree or equivalent, preferably electrical engineering or related Experience with large scale electricity projects required, experience with HV grid connections and/or BESS projects desirable Familiarity with relevant norms and standards Ability to discuss technical aspects of all engineering disciplines (civil, electrical, controls, etc.) Experience carrying out design reviews, ideally working with/for Owner's Engineers Competency with AutoCAD software (for review purposes), document management systems, and standard office software Ability to coordinate and communicate with a wide range of stakeholders, including internal teams, external contractors, technical advisors, and regulatory bodies Willingness for occasional travel to project sites or international offices Highly organised, attention to detail, a problem-solving mindset and commercial acumen The Design Manager position is offering Circa. £60,000 - £80,000 basic salary plus excellent benefits for the successful candidate. This is a full-time, permanent, hybrid position offering flexibility to work 3 days per week at our client's office in the central London. All successful candidates will be contacted within 5 days of application for the position of Design Manager. This vacancy is being advertised by Technical Prospects Ltd. The services advertised by Technical Prospects Ltd are those of an Employment Agency.
Design Manager - North of England Offering Circa. £60,000 - £80,000 Basic Salary plus Excellent Benefits! Our client is focused on driving the transition to a sustainable energy future. Currently recruiting a Design Manager who will be responsible for reviewing and ensuring the sufficiency of design and quality control documentation for a variety of Battery Energy Storage System (BESS) sites across Europe. The ideal candidate will have proven experience performing and managing the review of designs for high voltage construction projects such as renewable energy projects, BESS, substations, or similar, from a Distribution Network Operator, Owner's Engineer, contractor or developer's perspective. The Design Manager requires an individual to be technically competent with excellent communication skills, is able to distinguish high priority issues with clarity, and manage their identification and resolution in a variety of settings (different countries, contractors, contractual arrangements, etc.). Design Manager - Key responsibilities Agree the right design review strategy for each project and lead the review of all design submissions from contractors and other project stakeholders (DNO, TSO, etc.), ensuring they meet project requirements and ensuring adherence to relevant norms and standards for projects Proactively identify and prioritise important issues, identify required documentation and required submission dates to ensure interfaces between equipment and works of different parties can be clarified, and any review processes completed without impacting the project timeline Coordinate with external owner's engineers and specialists for supplementary design reviews or technical support where necessary Play a key role in the development of Requests for Proposals (RFPs) and technical specifications for equipment and works, ideally including HV equipment (such as transformers up to 400kV) Provide input to project's quality management plans and define quality requirements for projects Review as-built documentation at project completion to confirm its accuracy and completeness Actively participate in project meetings and lessons-learned workshops to contribute to the continuous improvement of internal processes and standards Support the asset management team by documenting and capturing any design modifications made during the operational phase of projects Establish and maintain a consistent design and documentation methodology to be applied across all European projects, while accommodating market-specific requirements Oversee the central management, collation, and organisation of technical documentation Capacity building and support of the development team to ensure that designs submitted for permitting are realistic and constructible Design Manager - Experience and skills Engineering degree or equivalent, preferably electrical engineering or related Experience with large scale electricity projects required, experience with HV grid connections and/or BESS projects desirable Familiarity with relevant norms and standards Ability to discuss technical aspects of all engineering disciplines (civil, electrical, controls, etc.) Experience carrying out design reviews, ideally working with/for Owner's Engineers Competency with AutoCAD software (for review purposes), document management systems, and standard office software Ability to coordinate and communicate with a wide range of stakeholders, including internal teams, external contractors, technical advisors, and regulatory bodies Willingness for occasional travel to project sites or international offices Highly organised, attention to detail, a problem-solving mindset and commercial acumen The Design Manager position is offering Circa. £60,000 - £80,000 basic salary plus excellent benefits for the successful candidate. This is a full-time, permanent, hybrid position offering flexibility to work 3 days per week at our client's office in the North of England. All successful candidates will be contacted within 5 days of application for the position of Design Manager. This vacancy is being advertised by Technical Prospects Ltd. The services advertised by Technical Prospects Ltd are those of an Employment Agency.
Oct 02, 2025
Full time
Design Manager - North of England Offering Circa. £60,000 - £80,000 Basic Salary plus Excellent Benefits! Our client is focused on driving the transition to a sustainable energy future. Currently recruiting a Design Manager who will be responsible for reviewing and ensuring the sufficiency of design and quality control documentation for a variety of Battery Energy Storage System (BESS) sites across Europe. The ideal candidate will have proven experience performing and managing the review of designs for high voltage construction projects such as renewable energy projects, BESS, substations, or similar, from a Distribution Network Operator, Owner's Engineer, contractor or developer's perspective. The Design Manager requires an individual to be technically competent with excellent communication skills, is able to distinguish high priority issues with clarity, and manage their identification and resolution in a variety of settings (different countries, contractors, contractual arrangements, etc.). Design Manager - Key responsibilities Agree the right design review strategy for each project and lead the review of all design submissions from contractors and other project stakeholders (DNO, TSO, etc.), ensuring they meet project requirements and ensuring adherence to relevant norms and standards for projects Proactively identify and prioritise important issues, identify required documentation and required submission dates to ensure interfaces between equipment and works of different parties can be clarified, and any review processes completed without impacting the project timeline Coordinate with external owner's engineers and specialists for supplementary design reviews or technical support where necessary Play a key role in the development of Requests for Proposals (RFPs) and technical specifications for equipment and works, ideally including HV equipment (such as transformers up to 400kV) Provide input to project's quality management plans and define quality requirements for projects Review as-built documentation at project completion to confirm its accuracy and completeness Actively participate in project meetings and lessons-learned workshops to contribute to the continuous improvement of internal processes and standards Support the asset management team by documenting and capturing any design modifications made during the operational phase of projects Establish and maintain a consistent design and documentation methodology to be applied across all European projects, while accommodating market-specific requirements Oversee the central management, collation, and organisation of technical documentation Capacity building and support of the development team to ensure that designs submitted for permitting are realistic and constructible Design Manager - Experience and skills Engineering degree or equivalent, preferably electrical engineering or related Experience with large scale electricity projects required, experience with HV grid connections and/or BESS projects desirable Familiarity with relevant norms and standards Ability to discuss technical aspects of all engineering disciplines (civil, electrical, controls, etc.) Experience carrying out design reviews, ideally working with/for Owner's Engineers Competency with AutoCAD software (for review purposes), document management systems, and standard office software Ability to coordinate and communicate with a wide range of stakeholders, including internal teams, external contractors, technical advisors, and regulatory bodies Willingness for occasional travel to project sites or international offices Highly organised, attention to detail, a problem-solving mindset and commercial acumen The Design Manager position is offering Circa. £60,000 - £80,000 basic salary plus excellent benefits for the successful candidate. This is a full-time, permanent, hybrid position offering flexibility to work 3 days per week at our client's office in the North of England. All successful candidates will be contacted within 5 days of application for the position of Design Manager. This vacancy is being advertised by Technical Prospects Ltd. The services advertised by Technical Prospects Ltd are those of an Employment Agency.
Job Title: HV Commissioning/ Protection Engineer Business: Lucy Electric UK Ltd - Energy Services Location: Remote/Field-based Job Number: 3244 Job Purpose: We seek an experienced, talented, and focused Commissioning/ Protection Engineer to join our dynamic team currently delivering installation, maintenance, and product support services for Low Voltage/High Voltage (LV/HV) assets across the Midlands, Central south and South East of England. Business Overview: Lucy Electric is an international leader in intelligent secondary power distribution products and solutions, with features such as remote operation and monitoring. Linking energy generation to consumption, the business specialises in high-performance medium and low-voltage switchgear for utility, industrial and commercial applications. Job Context: You will work as part of a highly skilled Engineering division supporting all aspects of LV/HV services to our clients and customers. As part of our team, you will get to both support your peers in the delivery of HV engineering and be required to lead projects when called on. We strive forwards as a team advancing our technical skills, knowledge, and competencies together, whilst ensuring a flexible work life balance is worked into our ethos. Job Dimensions: You will be working with a team of skilled Engineers, SAP s and supporting staff across all aspects of the LV/HV industry. The role is home based with travel to site works included within your working day. The core hours are 07:30 to 16:00 Monday to Thursday, 07:30 am to 12:00 Friday, depending on operational work and site requirements. Contract terms for flexibility and programme delivery operate 5 working days Monday to Saturday. Additional weekend working will be required as part of this role to support our clients and programmes of work. Opportunities to support additional overtime through evenings, weekends and travel abroad are also frequently available. Key Accountabilities: Essential: Installation, commissioning, and fault finding on new and older, protection, automatic transfer systems and various control systems. Co-ordinate commissioning plans, schedules, and checklists to ensure all commissioning activities and performance testing are executed efficiently Development of commissioning procedures Protection relays, synchroniser, transducers, primary and secondary injection testing, with the use of various test/commissioning equipment. Commissioning and testing of varying HV Assets using associated equipment to include; Omicron Campano 100 Omicron CT Analysers, Megger Sverker 750, Baur PGK 25/80E, Various Primary and Secondary Injection sets, Schneider LVP85510SP ACB Tester. (might be a bit too precise, remove if required) Ability to read and understand all levels and types of electrical drawings, SLD and control relay logic design documentation. Demonstrable experience to produce clear and professional job reports. Quality Control and Technical compliance in accordance with project requirements. Completing and transmitting inspection check-sheets as required Compliance with the Safety Management System and client safety rules Ensuring that all necessary technical reports (or contributions to technical reports) are completed in a timely manner. Support tendering and project managers with technical advice and customer communications as and when required. Facilitate a safe working environment during high / low voltage working. Ensure that all work is carried out in accordance with the standards, policies and procedures of Lucy Electric and its customers. Maintain all authorisations in accordance with legislative our safety procedures and industry best practice. Liaise closely with team to understand and manage priorities. Qualifications, Experience & Skills: Minimum Qualifications, Knowledge and Experience: Experience in multiple relays and competent to fully commission and sign off. These would include (not all): Alstom Electromechanical, VIP 300/400, Micrologic, G99, Micom P154/P122, Restricted Earth Fault (REF), TEC System T15 Competency with testing equipment: VLF, Campano, Sverker, Pressure Test. Certified in electricity at work and experience of delivering efficient and effective services to customers whether on site or at a planning stage from an office environment. Good knowledge of H&S and its practical implications. Good knowledge of Distribution Safety rules and their application. Computer literate skilled in MS office Full driver s License, willingness to travel within the UK as required, and work weekends as overtime or with a day off in the week. Behavioural Competencies: Good interpersonal skills with a pleasant and can-do attitude. Highly organised and tidy. Must have a positive and confident approach to tasks. Good problem-solving skills. Able to work independently, within/ or leading a team. Does this sound interesting? We would love to hear from you. Our application process is quick and easy. Apply today!
Oct 02, 2025
Full time
Job Title: HV Commissioning/ Protection Engineer Business: Lucy Electric UK Ltd - Energy Services Location: Remote/Field-based Job Number: 3244 Job Purpose: We seek an experienced, talented, and focused Commissioning/ Protection Engineer to join our dynamic team currently delivering installation, maintenance, and product support services for Low Voltage/High Voltage (LV/HV) assets across the Midlands, Central south and South East of England. Business Overview: Lucy Electric is an international leader in intelligent secondary power distribution products and solutions, with features such as remote operation and monitoring. Linking energy generation to consumption, the business specialises in high-performance medium and low-voltage switchgear for utility, industrial and commercial applications. Job Context: You will work as part of a highly skilled Engineering division supporting all aspects of LV/HV services to our clients and customers. As part of our team, you will get to both support your peers in the delivery of HV engineering and be required to lead projects when called on. We strive forwards as a team advancing our technical skills, knowledge, and competencies together, whilst ensuring a flexible work life balance is worked into our ethos. Job Dimensions: You will be working with a team of skilled Engineers, SAP s and supporting staff across all aspects of the LV/HV industry. The role is home based with travel to site works included within your working day. The core hours are 07:30 to 16:00 Monday to Thursday, 07:30 am to 12:00 Friday, depending on operational work and site requirements. Contract terms for flexibility and programme delivery operate 5 working days Monday to Saturday. Additional weekend working will be required as part of this role to support our clients and programmes of work. Opportunities to support additional overtime through evenings, weekends and travel abroad are also frequently available. Key Accountabilities: Essential: Installation, commissioning, and fault finding on new and older, protection, automatic transfer systems and various control systems. Co-ordinate commissioning plans, schedules, and checklists to ensure all commissioning activities and performance testing are executed efficiently Development of commissioning procedures Protection relays, synchroniser, transducers, primary and secondary injection testing, with the use of various test/commissioning equipment. Commissioning and testing of varying HV Assets using associated equipment to include; Omicron Campano 100 Omicron CT Analysers, Megger Sverker 750, Baur PGK 25/80E, Various Primary and Secondary Injection sets, Schneider LVP85510SP ACB Tester. (might be a bit too precise, remove if required) Ability to read and understand all levels and types of electrical drawings, SLD and control relay logic design documentation. Demonstrable experience to produce clear and professional job reports. Quality Control and Technical compliance in accordance with project requirements. Completing and transmitting inspection check-sheets as required Compliance with the Safety Management System and client safety rules Ensuring that all necessary technical reports (or contributions to technical reports) are completed in a timely manner. Support tendering and project managers with technical advice and customer communications as and when required. Facilitate a safe working environment during high / low voltage working. Ensure that all work is carried out in accordance with the standards, policies and procedures of Lucy Electric and its customers. Maintain all authorisations in accordance with legislative our safety procedures and industry best practice. Liaise closely with team to understand and manage priorities. Qualifications, Experience & Skills: Minimum Qualifications, Knowledge and Experience: Experience in multiple relays and competent to fully commission and sign off. These would include (not all): Alstom Electromechanical, VIP 300/400, Micrologic, G99, Micom P154/P122, Restricted Earth Fault (REF), TEC System T15 Competency with testing equipment: VLF, Campano, Sverker, Pressure Test. Certified in electricity at work and experience of delivering efficient and effective services to customers whether on site or at a planning stage from an office environment. Good knowledge of H&S and its practical implications. Good knowledge of Distribution Safety rules and their application. Computer literate skilled in MS office Full driver s License, willingness to travel within the UK as required, and work weekends as overtime or with a day off in the week. Behavioural Competencies: Good interpersonal skills with a pleasant and can-do attitude. Highly organised and tidy. Must have a positive and confident approach to tasks. Good problem-solving skills. Able to work independently, within/ or leading a team. Does this sound interesting? We would love to hear from you. Our application process is quick and easy. Apply today!
Lead Quality Engineer Start Date: ASAP Rate: 500 - 600 per day (Outside IR35, dependent on experience) Location: East of England (with limited hybrid flexibility) Contract Length: 12 months Turner Lovell is working in partnership with a leading EPC contractor delivering a complex renewable energy project, in the East of England. This role is ideal for a quality professional with experience in construction, high-voltage substation or renewable energy environments. You'll take the lead in monitoring and enforcing QA/QC processes, collaborating with internal teams and subcontractors to ensure compliance across construction, installation, and commissioning phases. This is an excellent opportunity for a detail-oriented professional looking to make a meaningful contribution to the UK's energy transition. Responsibilities: Lead site-based quality management for the project scope, ensuring adherence to project, client, and regulatory standards. Review and implement Inspection & Test Plans (ITPs), Method Statements, and Quality Plans for civil, M&E, and commissioning works. Carry out regular site inspections and internal audits to verify work quality and compliance (promoting continuous improvement and lessons learned). Manage and close out Non-Conformance Reports (NCRs) and support root cause analysis. Liaise with package managers, contractors, and client representatives to coordinate quality-related deliverables. Ensure documentation and certification (including test records and inspection reports) are accurately maintained and submitted. Support final handover documentation and ensure all QA records align with OFTO / TSO / client expectations. Act as the quality point of contact for site works and interface with wider project QA teams. Requirements: Prior experience in a Quality Manager or QA/QC Lead role on HV, substation, or renewable projects Strong working knowledge of EPC delivery processes , inspection and test procedures, and quality documentation management Experience reviewing method statements, ITPs, materials certificates, and test results Excellent communication and stakeholder management skills in a site-based, multi-contractor environment Qualifications in Quality Management (e.g., ISO 9001 Lead Auditor) or related discipline preferred Right to work in the UK and availability to work full-time on site in the East of England This is a unique opportunity to contribute to one of the UK's most significant renewable energy projects while working alongside a respected team of industry professionals. This is a brilliant opportunity for an experienced Quality Manager to make a meaningful impact on essential energy infrastructure. To apply, please contact Maddie Jacob at (url removed) / (phone number removed)
Oct 02, 2025
Contractor
Lead Quality Engineer Start Date: ASAP Rate: 500 - 600 per day (Outside IR35, dependent on experience) Location: East of England (with limited hybrid flexibility) Contract Length: 12 months Turner Lovell is working in partnership with a leading EPC contractor delivering a complex renewable energy project, in the East of England. This role is ideal for a quality professional with experience in construction, high-voltage substation or renewable energy environments. You'll take the lead in monitoring and enforcing QA/QC processes, collaborating with internal teams and subcontractors to ensure compliance across construction, installation, and commissioning phases. This is an excellent opportunity for a detail-oriented professional looking to make a meaningful contribution to the UK's energy transition. Responsibilities: Lead site-based quality management for the project scope, ensuring adherence to project, client, and regulatory standards. Review and implement Inspection & Test Plans (ITPs), Method Statements, and Quality Plans for civil, M&E, and commissioning works. Carry out regular site inspections and internal audits to verify work quality and compliance (promoting continuous improvement and lessons learned). Manage and close out Non-Conformance Reports (NCRs) and support root cause analysis. Liaise with package managers, contractors, and client representatives to coordinate quality-related deliverables. Ensure documentation and certification (including test records and inspection reports) are accurately maintained and submitted. Support final handover documentation and ensure all QA records align with OFTO / TSO / client expectations. Act as the quality point of contact for site works and interface with wider project QA teams. Requirements: Prior experience in a Quality Manager or QA/QC Lead role on HV, substation, or renewable projects Strong working knowledge of EPC delivery processes , inspection and test procedures, and quality documentation management Experience reviewing method statements, ITPs, materials certificates, and test results Excellent communication and stakeholder management skills in a site-based, multi-contractor environment Qualifications in Quality Management (e.g., ISO 9001 Lead Auditor) or related discipline preferred Right to work in the UK and availability to work full-time on site in the East of England This is a unique opportunity to contribute to one of the UK's most significant renewable energy projects while working alongside a respected team of industry professionals. This is a brilliant opportunity for an experienced Quality Manager to make a meaningful impact on essential energy infrastructure. To apply, please contact Maddie Jacob at (url removed) / (phone number removed)
BAM UK & Ireland Enabling Services Limited
Selby, Yorkshire
Building a sustainable tomorrow We have an exciting opportunity for a Project Safety Manager to join our team on the Eastern Green Link 2 (EGL2) project, based in Wren Hall, Selby (North Yorkshire). This major infrastructure project involves the construction of a 525kV, 2GW high-voltage direct current (HVDC) subsea transmission cable, connecting Peterhead, Scotland, to Wren Hall, Selby (North Yorksh click apply for full job details
Oct 02, 2025
Full time
Building a sustainable tomorrow We have an exciting opportunity for a Project Safety Manager to join our team on the Eastern Green Link 2 (EGL2) project, based in Wren Hall, Selby (North Yorkshire). This major infrastructure project involves the construction of a 525kV, 2GW high-voltage direct current (HVDC) subsea transmission cable, connecting Peterhead, Scotland, to Wren Hall, Selby (North Yorksh click apply for full job details
