Job Title: Embedded Software Engineer Location: Glasgow Salary: Up to £55,000 (DOE) About the Role: This is an exciting opportunity to join a growing engineering team as they develop the next generation of intelligent, high-performance technology. We are seeking an Embedded Software Engineer to join their Programming Department and play a key role in developing firmware and embedded software that powers smart consumer devices. You will collaborate closely with hardware, electrical, and product development engineers to deliver highly reliable embedded solutions. Key Responsibilities: Design, develop, and maintain embedded firmware for microcontroller-based consumer products. Implement and optimise DSP algorithms , control logic, filtering, signal processing or sensor-handling functions. Develop low-level drivers for SPI, I C, UART, CAN, ADC/DAC, and other interfaces. Work with cross-functional teams to integrate firmware with electronics and mechanical systems. Debug complex embedded issues using oscilloscopes, logic analysers, and test automation frameworks. Review code to ensure maintainability, readability and high standards across the firmware codebase. About you: Strong coding ability in C and C++ for embedded systems Experience with RTOS platforms (FreeRTOS, VxWorks) or embedded Linux Proven ability to debug complex firmware issues and identify root causes Experience with DSP algorithms such as filtering, FFT/IFFT, AGC, equalisation or noise suppression Experience on embedded platforms such as ARM Cortex-M , Blackfin, SHARC, TI DSPs, or similar Familiarity with VHDL or FPGA-based processing (desirable but not required) Experience with tools such as Code Composer Studio, Keil, Eclipse, Visual Studio, CLion Understanding of hardware schematics, datasheets, and mixed-signal electronics Please note we cannot offer sponsorship for the role. If interested, please send over an updated CV.
Dec 18, 2025
Full time
Job Title: Embedded Software Engineer Location: Glasgow Salary: Up to £55,000 (DOE) About the Role: This is an exciting opportunity to join a growing engineering team as they develop the next generation of intelligent, high-performance technology. We are seeking an Embedded Software Engineer to join their Programming Department and play a key role in developing firmware and embedded software that powers smart consumer devices. You will collaborate closely with hardware, electrical, and product development engineers to deliver highly reliable embedded solutions. Key Responsibilities: Design, develop, and maintain embedded firmware for microcontroller-based consumer products. Implement and optimise DSP algorithms , control logic, filtering, signal processing or sensor-handling functions. Develop low-level drivers for SPI, I C, UART, CAN, ADC/DAC, and other interfaces. Work with cross-functional teams to integrate firmware with electronics and mechanical systems. Debug complex embedded issues using oscilloscopes, logic analysers, and test automation frameworks. Review code to ensure maintainability, readability and high standards across the firmware codebase. About you: Strong coding ability in C and C++ for embedded systems Experience with RTOS platforms (FreeRTOS, VxWorks) or embedded Linux Proven ability to debug complex firmware issues and identify root causes Experience with DSP algorithms such as filtering, FFT/IFFT, AGC, equalisation or noise suppression Experience on embedded platforms such as ARM Cortex-M , Blackfin, SHARC, TI DSPs, or similar Familiarity with VHDL or FPGA-based processing (desirable but not required) Experience with tools such as Code Composer Studio, Keil, Eclipse, Visual Studio, CLion Understanding of hardware schematics, datasheets, and mixed-signal electronics Please note we cannot offer sponsorship for the role. If interested, please send over an updated CV.
About Us SharkNinja is a global product design and technology company, with a diversified portfolio of 5-star rated lifestyle solutions that positively impact people's lives in homes around the world. Powered by two trusted, global brands, Shark and Ninja , the company has a proven track record of bringing disruptive innovation to market, and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. Headquartered in Needham, Massachusetts with more than 3,600+ associates, the company's products are sold at key retailers, online and offline, and through distributors around the world . Innovators Wanted - Join Our Extraordinary Advanced Development Talent Community! At SharkNinja, we are always seeking world-class engineering talent eager to push the boundaries of product design innovation. Whether you are a technical leader, a complex problem solver, or an engineer driven by curiosity and hands-on experimentation, we want to hear from you! Our Advanced Development (Product Design Engineering & Front-End Innovation) teams thrive on tinkering-whether it's conceptualizing, prototyping, or refining the next generation of consumer products. We embrace engineering rigor, rapid iteration, and cross-disciplinary collaboration to transform ambitious ideas into manufacturable, high-performance solutions. If you are passionate about hands-on engineering, systems thinking, and delivering best-in-class solutions, join us. Think beyond conventional boundaries, embrace technical challenges, and be part of a team that turns visionary concepts into reality. What You'll Do Invent & Innovate: Develop and prototype new product concepts that redefine consumer expectations. Collaborate & Build: Work cross-functionally with engineering, design, user experience, and manufacturing teams to bring ideas to life. Create Scalable Solutions: Design new technologies that transition seamlessly from early-stage development to full-scale production. Shape the Future: Influence SharkNinja's product roadmap with disruptive, consumer-driven ideas. Support the communication of ideas quickly and be able to drive a team effectively using a combination of sketching, CAD layouts, 3D models and working prototypes to evaluate potential solutions. Confidence in managing external providers of technology solution to reduce our time to market. Understand the importance of clear product definition during the design process but be able to appreciate the spark of inspiration. Be naturally curious and relentlessly driven to find better solutions to everyday problems. What You'll Bring We are open to talent at all levels! Whether you have a few years of experience or a seasoned career in Advanced Development/Product Design Engineering, what matters most is your ability to innovate, collaborate, and execute. Ideal candidates will have: A passion for problem-solving, creative thinking, and technical excellence. The ideal candidate will have a degree-level technical qualification, ideally in Industrial Design, Mechanical Engineering or Product Design Engineering, with significant product design content. Extensive experience in an Industrial design/product design/innovation environment A track record of concept development, prototyping, and transitioning projects into production. Strong collaboration skills and the ability to work in a fast-paced, entrepreneurial environment. Proven track record of taking consumer concept ideas through selection process and into tooling and mass production. Strong leadership experience required with excellent communication skills and an inspirational leadership style. Extensive experience required in areas of High-Volume Plastic Injection Molding, Sheet Metal, Die Casting etc. About the Team: Endless Innovation: We don't just create products; we revolutionize categories. Fast-Paced & Impactful: Work on meaningful projects with real-world impact. Growth Opportunities: Whether you're early in your career or a seasoned professional, we invest in talent development. A Culture of Curiosity: We encourage bold thinking and taking smart risks. If you're excited about the future of Advanced Development and want to be part of a company that never stops innovating, let's connect! SharkNinja is always on the lookout for top-tier AD talent to help shape the future. Our Culture At SharkNinja, we don't just raise the bar-we push past it every single day. Our Outrageously Extraordinary mindset drives us to tackle the impossible, push boundaries, and deliver results that others only dream of. If you thrive on breaking out of your swim lane, you'll be right at home. What We Offer We offer competitive health insurance, retirement plans, paid time off, employee stock purchase options, wellness programs, SharkNinja product discounts, and more. We empower your personal and professional growth with high impact Learning Programs featuring bold voices redefining what's possible. When you join, you're not just part of a company-you're part of an outrageously extraordinary community. To gether, we won't just launch products- we'll disrupt entire markets. At SharkNinja, Diversity, Equity, and Inclusion are vital to our global success. Valuing each unique voice and blending all of our diverse skills strengthens SharkNinja's innovation every day. We support ALL associates in bringing their authentic selves to work, making an impact, and having the opportunity for career acceleration. With help from our leadership, associates, and our community, we aim to have equity be a key component of the SharkNinja DNA. Learn more about us: Life At SharkNinja Outrageously Extraordinary SharkNinja Candidate Privacy Notice For candidates based in all regions, please refer to this Candidate Privacy Notice . For candidates based in China, please refer to this Candidate Privacy Notice . For candidates based in Vietnam, please refer to this Candidate Privacy Notice . We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability, or any other class protected by legislation, and local law. SharkNinja will consider reasonable accommodations consistent with legislation, and local law. If you require a reasonable accommodation to participate in the job application or interview process, please contact SharkNinja People & Culture at
Dec 18, 2025
Full time
About Us SharkNinja is a global product design and technology company, with a diversified portfolio of 5-star rated lifestyle solutions that positively impact people's lives in homes around the world. Powered by two trusted, global brands, Shark and Ninja , the company has a proven track record of bringing disruptive innovation to market, and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. Headquartered in Needham, Massachusetts with more than 3,600+ associates, the company's products are sold at key retailers, online and offline, and through distributors around the world . Innovators Wanted - Join Our Extraordinary Advanced Development Talent Community! At SharkNinja, we are always seeking world-class engineering talent eager to push the boundaries of product design innovation. Whether you are a technical leader, a complex problem solver, or an engineer driven by curiosity and hands-on experimentation, we want to hear from you! Our Advanced Development (Product Design Engineering & Front-End Innovation) teams thrive on tinkering-whether it's conceptualizing, prototyping, or refining the next generation of consumer products. We embrace engineering rigor, rapid iteration, and cross-disciplinary collaboration to transform ambitious ideas into manufacturable, high-performance solutions. If you are passionate about hands-on engineering, systems thinking, and delivering best-in-class solutions, join us. Think beyond conventional boundaries, embrace technical challenges, and be part of a team that turns visionary concepts into reality. What You'll Do Invent & Innovate: Develop and prototype new product concepts that redefine consumer expectations. Collaborate & Build: Work cross-functionally with engineering, design, user experience, and manufacturing teams to bring ideas to life. Create Scalable Solutions: Design new technologies that transition seamlessly from early-stage development to full-scale production. Shape the Future: Influence SharkNinja's product roadmap with disruptive, consumer-driven ideas. Support the communication of ideas quickly and be able to drive a team effectively using a combination of sketching, CAD layouts, 3D models and working prototypes to evaluate potential solutions. Confidence in managing external providers of technology solution to reduce our time to market. Understand the importance of clear product definition during the design process but be able to appreciate the spark of inspiration. Be naturally curious and relentlessly driven to find better solutions to everyday problems. What You'll Bring We are open to talent at all levels! Whether you have a few years of experience or a seasoned career in Advanced Development/Product Design Engineering, what matters most is your ability to innovate, collaborate, and execute. Ideal candidates will have: A passion for problem-solving, creative thinking, and technical excellence. The ideal candidate will have a degree-level technical qualification, ideally in Industrial Design, Mechanical Engineering or Product Design Engineering, with significant product design content. Extensive experience in an Industrial design/product design/innovation environment A track record of concept development, prototyping, and transitioning projects into production. Strong collaboration skills and the ability to work in a fast-paced, entrepreneurial environment. Proven track record of taking consumer concept ideas through selection process and into tooling and mass production. Strong leadership experience required with excellent communication skills and an inspirational leadership style. Extensive experience required in areas of High-Volume Plastic Injection Molding, Sheet Metal, Die Casting etc. About the Team: Endless Innovation: We don't just create products; we revolutionize categories. Fast-Paced & Impactful: Work on meaningful projects with real-world impact. Growth Opportunities: Whether you're early in your career or a seasoned professional, we invest in talent development. A Culture of Curiosity: We encourage bold thinking and taking smart risks. If you're excited about the future of Advanced Development and want to be part of a company that never stops innovating, let's connect! SharkNinja is always on the lookout for top-tier AD talent to help shape the future. Our Culture At SharkNinja, we don't just raise the bar-we push past it every single day. Our Outrageously Extraordinary mindset drives us to tackle the impossible, push boundaries, and deliver results that others only dream of. If you thrive on breaking out of your swim lane, you'll be right at home. What We Offer We offer competitive health insurance, retirement plans, paid time off, employee stock purchase options, wellness programs, SharkNinja product discounts, and more. We empower your personal and professional growth with high impact Learning Programs featuring bold voices redefining what's possible. When you join, you're not just part of a company-you're part of an outrageously extraordinary community. To gether, we won't just launch products- we'll disrupt entire markets. At SharkNinja, Diversity, Equity, and Inclusion are vital to our global success. Valuing each unique voice and blending all of our diverse skills strengthens SharkNinja's innovation every day. We support ALL associates in bringing their authentic selves to work, making an impact, and having the opportunity for career acceleration. With help from our leadership, associates, and our community, we aim to have equity be a key component of the SharkNinja DNA. Learn more about us: Life At SharkNinja Outrageously Extraordinary SharkNinja Candidate Privacy Notice For candidates based in all regions, please refer to this Candidate Privacy Notice . For candidates based in China, please refer to this Candidate Privacy Notice . For candidates based in Vietnam, please refer to this Candidate Privacy Notice . We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability, or any other class protected by legislation, and local law. SharkNinja will consider reasonable accommodations consistent with legislation, and local law. If you require a reasonable accommodation to participate in the job application or interview process, please contact SharkNinja People & Culture at
Software Design Engineer (Siemens). Rate: £450-£500 per day charge rate. Location: Nottingham Contract Length: Initial 3 Months (with potential extension) We are seeking an experienced Contract Software Design Engineer to provide specialist consultancy and technical support across a range of automation projects. This role is ideal for an independent professional with deep expertise in PLC programming, control systems, and automated production machinery. About the Client Our client is a rapidly growing industrial engineering business group. They specialise in the design, manufacture, installation, commissioning, and servicing of control systems for the automated warehouse and logistics industry. Alongside sister companies in systems integration and automation, they deliver end-to-end solutions covering PLC programming, HMI software, hardware design, control panel manufacturing, and full on-site commissioning. Their projects span diverse automation technologies, from conveyors and pallet handling to robotics and high-speed sortation systems. Key Responsibilities Design and Develop Automation Software Architect, implement, and optimise software components for warehouse automation systems, including material handling equipment, conveyor controls, sorters, automated storage systems, and robotic solutions. PLC and Industrial Control System Programming Create and maintain PLC logic (e.g., Siemens TIA Portal, Step 7, S7-1200/1500) and HMI/SCADA interfaces for high-throughput logistics operations. Integrate Mechatronic Systems Develop software interfaces and communication modules for sensors, actuators, drives, programmable controllers, and industrial networks (e.g., PROFINET, OPC UA). System Architecture & Requirements Engineering Translate customer and business requirements into technical specifications, functional designs, and modular software architectures aligned with Siemens automation standards. Software Testing, Simulation & Commissioning Conduct unit testing, system simulation, virtual commissioning, and on-site commissioning to ensure robust, reliable, and safe system performance. Optimise Warehouse Throughput & System Performance Analyse data, identify bottlenecks, and implement software improvements to enhance system efficiency, throughput, and reliability. Customer Support & Troubleshooting Provide technical support during installation, testing, and ramp-up; troubleshoot software-related issues in live warehouse environments. Documentation & Lifecycle Management Create detailed technical documentation, including software design specifications, system architecture diagrams, test plans, and change logs. Collaborate with Cross-Functional Teams Work closely with mechanical, electrical, controls, and project engineering teams to deliver integrated automation solutions. Contractor Profile Experienced Software Design Engineer with a strong background in control systems, PLC programming, and industrial automation . Extensive hands-on expertise with Siemens PLC technologies , including S7-300/400 and TIA Portal, applied across automated machinery and logistics environments. Proven track record acting as a technical expert within machinery systems integration, supporting full project lifecycles from design through commissioning. Deep understanding of automated production machinery , warehouse automation equipment, and end-to-end manufacturing processes. Highly skilled in control software design , including PLC logic development, debugging, system tuning, and performance optimisation. Strong ability to interpret and work from electrical and pneumatic schematics , ensuring accurate integration of software with mechanical and electrical systems. In-depth knowledge of industrial hardware components such as motors, drives, sensors, and actuators, supporting effective system-level design decisions. Analytical, detail-oriented engineer with a focus on reliability, efficiency, and seamless integration within complex automation systems. Apply Today Take the next step in your engineering career with a dynamic and well-established company. Apply directly on this site or send your CV to (url removed) ATA Recruitment specialises in contract and permanent roles within Manufacturing, Civil, Infrastructure, Transportation, and General Engineering. For more roles like this, visit: (url removed) By applying, you agree to our Privacy Policy. You must be eligible to work in the UK sponsorship is not available for this role. ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation
Dec 18, 2025
Contractor
Software Design Engineer (Siemens). Rate: £450-£500 per day charge rate. Location: Nottingham Contract Length: Initial 3 Months (with potential extension) We are seeking an experienced Contract Software Design Engineer to provide specialist consultancy and technical support across a range of automation projects. This role is ideal for an independent professional with deep expertise in PLC programming, control systems, and automated production machinery. About the Client Our client is a rapidly growing industrial engineering business group. They specialise in the design, manufacture, installation, commissioning, and servicing of control systems for the automated warehouse and logistics industry. Alongside sister companies in systems integration and automation, they deliver end-to-end solutions covering PLC programming, HMI software, hardware design, control panel manufacturing, and full on-site commissioning. Their projects span diverse automation technologies, from conveyors and pallet handling to robotics and high-speed sortation systems. Key Responsibilities Design and Develop Automation Software Architect, implement, and optimise software components for warehouse automation systems, including material handling equipment, conveyor controls, sorters, automated storage systems, and robotic solutions. PLC and Industrial Control System Programming Create and maintain PLC logic (e.g., Siemens TIA Portal, Step 7, S7-1200/1500) and HMI/SCADA interfaces for high-throughput logistics operations. Integrate Mechatronic Systems Develop software interfaces and communication modules for sensors, actuators, drives, programmable controllers, and industrial networks (e.g., PROFINET, OPC UA). System Architecture & Requirements Engineering Translate customer and business requirements into technical specifications, functional designs, and modular software architectures aligned with Siemens automation standards. Software Testing, Simulation & Commissioning Conduct unit testing, system simulation, virtual commissioning, and on-site commissioning to ensure robust, reliable, and safe system performance. Optimise Warehouse Throughput & System Performance Analyse data, identify bottlenecks, and implement software improvements to enhance system efficiency, throughput, and reliability. Customer Support & Troubleshooting Provide technical support during installation, testing, and ramp-up; troubleshoot software-related issues in live warehouse environments. Documentation & Lifecycle Management Create detailed technical documentation, including software design specifications, system architecture diagrams, test plans, and change logs. Collaborate with Cross-Functional Teams Work closely with mechanical, electrical, controls, and project engineering teams to deliver integrated automation solutions. Contractor Profile Experienced Software Design Engineer with a strong background in control systems, PLC programming, and industrial automation . Extensive hands-on expertise with Siemens PLC technologies , including S7-300/400 and TIA Portal, applied across automated machinery and logistics environments. Proven track record acting as a technical expert within machinery systems integration, supporting full project lifecycles from design through commissioning. Deep understanding of automated production machinery , warehouse automation equipment, and end-to-end manufacturing processes. Highly skilled in control software design , including PLC logic development, debugging, system tuning, and performance optimisation. Strong ability to interpret and work from electrical and pneumatic schematics , ensuring accurate integration of software with mechanical and electrical systems. In-depth knowledge of industrial hardware components such as motors, drives, sensors, and actuators, supporting effective system-level design decisions. Analytical, detail-oriented engineer with a focus on reliability, efficiency, and seamless integration within complex automation systems. Apply Today Take the next step in your engineering career with a dynamic and well-established company. Apply directly on this site or send your CV to (url removed) ATA Recruitment specialises in contract and permanent roles within Manufacturing, Civil, Infrastructure, Transportation, and General Engineering. For more roles like this, visit: (url removed) By applying, you agree to our Privacy Policy. You must be eligible to work in the UK sponsorship is not available for this role. ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation
Electro-Mechanical Winder/Coil Winder Location: Sunbury-on-Thames Contract: Permanent, Full-Time Hours: 07 00hrs Mon Thurs & 07 00hrs Fri. Salary: £26K - £31K based on experience Start Date: ASAP We are currently seeking an experienced Electro-Mechanical Winder to join a globally recognised engineering business, supporting the design and manufacture of high-performance electrical components used in critical sectors including medical, defence, and semiconductor industries. As an Electro-Mechanical Winder , you'll be responsible for precision winding, assembly, and testing of electric rotors, stators, armatures, and associated electro-mechanical parts. You'll play a vital role in quality assurance, troubleshooting, and supporting production efficiency. Key Responsibilities: Hand-wind and machine-wind coils for stators, rotors, and armatures Assemble and install components to engineering specifications Perform electrical and mechanical tests (e.g., hi-pot, core loss, balance checks) Use soldering equipment for thru-hole, SMD, and hard soldering tasks Inspect parts, raise quality issues, and complete all production documentation Maintain tooling, follow 5S and H&S standards, and contribute to continuous improvement Operate hand tools and small machinery for component assembly About You: Prior experience in electro-mechanical winding (or similar precision assembly work) Ability to read engineering drawings and follow SOPs Competent soldering skills on small components Detail-oriented with strong manual dexterity and mechanical aptitude Basic understanding of electrical systems and fault-finding Comfortable working to production targets in a team environment IT literate and able to complete electronic documentation and reports This Electro-Mechanical Winder role is ideal for someone who enjoys hands-on, small-component assembly work in a regulated, process-driven engineering environment. You'll be supported with training and development opportunities and welcomed into a close-knit, collaborative production team. TPA are a specialist recruitment agency recruiting on behalf of our client. If you think you are a close fit for this position, please do apply and we will also register you for any upcoming positions that may be suitable. Coil Winder , Coil Winder , Electro-Mechanical Winder,Electro-Mechanical Winder
Dec 18, 2025
Full time
Electro-Mechanical Winder/Coil Winder Location: Sunbury-on-Thames Contract: Permanent, Full-Time Hours: 07 00hrs Mon Thurs & 07 00hrs Fri. Salary: £26K - £31K based on experience Start Date: ASAP We are currently seeking an experienced Electro-Mechanical Winder to join a globally recognised engineering business, supporting the design and manufacture of high-performance electrical components used in critical sectors including medical, defence, and semiconductor industries. As an Electro-Mechanical Winder , you'll be responsible for precision winding, assembly, and testing of electric rotors, stators, armatures, and associated electro-mechanical parts. You'll play a vital role in quality assurance, troubleshooting, and supporting production efficiency. Key Responsibilities: Hand-wind and machine-wind coils for stators, rotors, and armatures Assemble and install components to engineering specifications Perform electrical and mechanical tests (e.g., hi-pot, core loss, balance checks) Use soldering equipment for thru-hole, SMD, and hard soldering tasks Inspect parts, raise quality issues, and complete all production documentation Maintain tooling, follow 5S and H&S standards, and contribute to continuous improvement Operate hand tools and small machinery for component assembly About You: Prior experience in electro-mechanical winding (or similar precision assembly work) Ability to read engineering drawings and follow SOPs Competent soldering skills on small components Detail-oriented with strong manual dexterity and mechanical aptitude Basic understanding of electrical systems and fault-finding Comfortable working to production targets in a team environment IT literate and able to complete electronic documentation and reports This Electro-Mechanical Winder role is ideal for someone who enjoys hands-on, small-component assembly work in a regulated, process-driven engineering environment. You'll be supported with training and development opportunities and welcomed into a close-knit, collaborative production team. TPA are a specialist recruitment agency recruiting on behalf of our client. If you think you are a close fit for this position, please do apply and we will also register you for any upcoming positions that may be suitable. Coil Winder , Coil Winder , Electro-Mechanical Winder,Electro-Mechanical Winder
Elvet Recruitment are recruiting for an experienced Project Manager on behalf of a market-leading specialist structural / concrete repairs contractor for works in the Midlands & surrounding areas. The company are an industry leader in their field delivering a number of solutions on bridges & structures nationwide. This large main contractor's specialisms include: Bridge Jacking, Bearing Replacement, Bridge Decking Upgrades, Mechanical Movement Joints, Parapet Renewals, Expansion Joints & general Concrete Repairs / Waterproofing. Projects fall within: Highways, Rail, Nuclear & more. Project values up to 10m. They operate as part of a larger Tier 1 company group with a turnover of 3bn+ meaning significant financial backing, security and the utmost priority on staff development. They're well know throughout this specialist industry for growing some of the most technically competent Engineers & Managers with their high standards. The pipeline of work for this contractor is extensive and spanning several sectors hence the need to bring in some key staff across their offices UK-wide. The business' priority is to bring in an experienced Project Manager who would ideally look to progress to Contracts Manager in due course with this employers unrivalled development. ( Please note : this is a nationwide role that will require regular working away. Flexible working offered but this will be dictated by individual project needs). Duties: Manage site teams and supply chain to deliver projects to quality targets and deadlines. Oversee projects 'cradle to grave' including tender, planning & programming. Writing documentation for sites. Early Warnings & Compensation Events. Working with client to achieve deadlines & build lasting relationships. Managing all contract changes - familiarity with NEC3 / NEC 4 needed. Commercial cost tracking and control for projects with Commercial team. Implement BIM to achieve effective delivery and drive safety, particularly with the use of 3D design and visualisation. Experience Required: Experience in management of civil engineering & structural projects ideally within rail or highways setting. Experience managing Bridge related schemes - bearings, deckings, movement joints, expansion joints etc. Experience in overseeing infrastructure project delivery working for main contractor - scheme values of 1m+. Knowledge of NEC contract suite. Qualifications: CSCS, SMSTS, APMP are essential. Degree or HNC/HND qualified is preferred. Remuneration: On offer is a salary of up to 65,000 (doe) plus generous package including: Car or allowance, pension, private health care, bonus scheme, death in service benefit, annual leave and more. Contact Andy Gray at Elvet Recruitment for a confidential discussion today.
Dec 18, 2025
Full time
Elvet Recruitment are recruiting for an experienced Project Manager on behalf of a market-leading specialist structural / concrete repairs contractor for works in the Midlands & surrounding areas. The company are an industry leader in their field delivering a number of solutions on bridges & structures nationwide. This large main contractor's specialisms include: Bridge Jacking, Bearing Replacement, Bridge Decking Upgrades, Mechanical Movement Joints, Parapet Renewals, Expansion Joints & general Concrete Repairs / Waterproofing. Projects fall within: Highways, Rail, Nuclear & more. Project values up to 10m. They operate as part of a larger Tier 1 company group with a turnover of 3bn+ meaning significant financial backing, security and the utmost priority on staff development. They're well know throughout this specialist industry for growing some of the most technically competent Engineers & Managers with their high standards. The pipeline of work for this contractor is extensive and spanning several sectors hence the need to bring in some key staff across their offices UK-wide. The business' priority is to bring in an experienced Project Manager who would ideally look to progress to Contracts Manager in due course with this employers unrivalled development. ( Please note : this is a nationwide role that will require regular working away. Flexible working offered but this will be dictated by individual project needs). Duties: Manage site teams and supply chain to deliver projects to quality targets and deadlines. Oversee projects 'cradle to grave' including tender, planning & programming. Writing documentation for sites. Early Warnings & Compensation Events. Working with client to achieve deadlines & build lasting relationships. Managing all contract changes - familiarity with NEC3 / NEC 4 needed. Commercial cost tracking and control for projects with Commercial team. Implement BIM to achieve effective delivery and drive safety, particularly with the use of 3D design and visualisation. Experience Required: Experience in management of civil engineering & structural projects ideally within rail or highways setting. Experience managing Bridge related schemes - bearings, deckings, movement joints, expansion joints etc. Experience in overseeing infrastructure project delivery working for main contractor - scheme values of 1m+. Knowledge of NEC contract suite. Qualifications: CSCS, SMSTS, APMP are essential. Degree or HNC/HND qualified is preferred. Remuneration: On offer is a salary of up to 65,000 (doe) plus generous package including: Car or allowance, pension, private health care, bonus scheme, death in service benefit, annual leave and more. Contact Andy Gray at Elvet Recruitment for a confidential discussion today.
Senior PCB Design Engineer Location: South of Cambridge Hybrid: 3 days onsite Join a team where exceptional engineering meets real-world impact. We design cutting-edge products across RF, digital, power and analogue domains for commercial, industrial and defence customers. We're known for high-quality engineering, honest collaboration and technology that drives safer, more sustainable outcomes. The Opportunity We're looking for a proactive Senior PCB Design Engineer to turn world-class electronic designs into manufacturable reality. Working closely with multidisciplinary engineers, you'll take full ownership of PCB layout, manufacturability, supplier engagement and release to manufacture. This role goes beyond layout-you'll help shape and advance PCB capability, reporting directly to the Director of Hardware. What You'll Do Convert schematics into robust, manufacturable PCB designs Manage schematic/footprint libraries and generate manufacturing data packs Maintain and develop supplier relationships across PCB CAD, fabrication and assembly Negotiate stack-ups, costs and lead times with manufacturers Own technical delivery of PCB design & manufacture, tracking progress for PMs Lead internal and external design reviews, ensuring designs meet ISO9001, quality and schedule requirements What You Bring A strong track record of PCB design projects; RF/microwave/mm-wave experience highly desirable Expert user of Altium ; familiarity with Siemens PADS a bonus Solid knowledge of SMT, DFA/DFM, IPC standards and EMI/EMC best practice Experience working closely with electronics and mechanical teams Confident communicator able to engage suppliers and influence outcomes HNC/HND or degree in Electronic/Electrical Engineering, plus 5+ years in hardware/product development Offering: Competitive salary + package aligned to your experience Clear routes for technical, commercial or managerial progression Strong support for training and professional development Friendly, collaborative culture with regular social events Hybrid working and excellent transport links to Cambridge
Dec 18, 2025
Full time
Senior PCB Design Engineer Location: South of Cambridge Hybrid: 3 days onsite Join a team where exceptional engineering meets real-world impact. We design cutting-edge products across RF, digital, power and analogue domains for commercial, industrial and defence customers. We're known for high-quality engineering, honest collaboration and technology that drives safer, more sustainable outcomes. The Opportunity We're looking for a proactive Senior PCB Design Engineer to turn world-class electronic designs into manufacturable reality. Working closely with multidisciplinary engineers, you'll take full ownership of PCB layout, manufacturability, supplier engagement and release to manufacture. This role goes beyond layout-you'll help shape and advance PCB capability, reporting directly to the Director of Hardware. What You'll Do Convert schematics into robust, manufacturable PCB designs Manage schematic/footprint libraries and generate manufacturing data packs Maintain and develop supplier relationships across PCB CAD, fabrication and assembly Negotiate stack-ups, costs and lead times with manufacturers Own technical delivery of PCB design & manufacture, tracking progress for PMs Lead internal and external design reviews, ensuring designs meet ISO9001, quality and schedule requirements What You Bring A strong track record of PCB design projects; RF/microwave/mm-wave experience highly desirable Expert user of Altium ; familiarity with Siemens PADS a bonus Solid knowledge of SMT, DFA/DFM, IPC standards and EMI/EMC best practice Experience working closely with electronics and mechanical teams Confident communicator able to engage suppliers and influence outcomes HNC/HND or degree in Electronic/Electrical Engineering, plus 5+ years in hardware/product development Offering: Competitive salary + package aligned to your experience Clear routes for technical, commercial or managerial progression Strong support for training and professional development Friendly, collaborative culture with regular social events Hybrid working and excellent transport links to Cambridge
Elvet Recruitment are recruiting for an experienced Project Manager on behalf of a market-leading specialist structural / concrete repairs contractor for works in the North West, Midlands & surrounding areas. The company are an industry leader in their field delivering a number of solutions on bridges & structures nationwide. This large main contractor's specialisms include: Bridge Jacking, Bearing Replacement, Bridge Decking Upgrades, Mechanical Movement Joints, Parapet Renewals, Expansion Joints & general Concrete Repairs / Waterproofing. Projects fall within: Highways, Rail, Nuclear & more. Project values up to 10m. They operate as part of a larger Tier 1 company group with a turnover of 3bn+ meaning significant financial backing, security and the utmost priority on staff development. They're well know throughout this specialist industry for growing some of the most technically competent Engineers & Managers with their high standards. The pipeline of work for this contractor is extensive and spanning several sectors hence the need to bring in some key staff across their offices UK-wide. The business' priority is to bring in an experienced Project Manager who would ideally look to progress to Contracts Manager in due course with this employers unrivalled development. ( Please note : this is a nationwide role that will require regular working away. Flexible working offered but this will be dictated by individual project needs). Duties: Manage site teams and supply chain to deliver projects to quality targets and deadlines. Oversee projects 'cradle to grave' including tender, planning & programming. Writing documentation for sites. Early Warnings & Compensation Events. Working with client to achieve deadlines & build lasting relationships. Managing all contract changes - familiarity with NEC3 / NEC 4 needed. Commercial cost tracking and control for projects with Commercial team. Implement BIM to achieve effective delivery and drive safety, particularly with the use of 3D design and visualisation. Experience Required: Experience in management of civil engineering & structural projects ideally within rail or highways setting. Experience managing Bridge related schemes - bearings, deckings, movement joints, expansion joints etc. Experience in overseeing infrastructure project delivery working for main contractor - scheme values of 1m+. Knowledge of NEC contract suite. Qualifications: CSCS, SMSTS, APMP are essential. Degree or HNC/HND qualified is preferred. Remuneration: On offer is a salary of up to 65,000 (doe) plus generous package including: Car or allowance, pension, private health care, bonus scheme, death in service benefit, annual leave and more. Contact Andy Gray at Elvet Recruitment for a confidential discussion today.
Dec 18, 2025
Full time
Elvet Recruitment are recruiting for an experienced Project Manager on behalf of a market-leading specialist structural / concrete repairs contractor for works in the North West, Midlands & surrounding areas. The company are an industry leader in their field delivering a number of solutions on bridges & structures nationwide. This large main contractor's specialisms include: Bridge Jacking, Bearing Replacement, Bridge Decking Upgrades, Mechanical Movement Joints, Parapet Renewals, Expansion Joints & general Concrete Repairs / Waterproofing. Projects fall within: Highways, Rail, Nuclear & more. Project values up to 10m. They operate as part of a larger Tier 1 company group with a turnover of 3bn+ meaning significant financial backing, security and the utmost priority on staff development. They're well know throughout this specialist industry for growing some of the most technically competent Engineers & Managers with their high standards. The pipeline of work for this contractor is extensive and spanning several sectors hence the need to bring in some key staff across their offices UK-wide. The business' priority is to bring in an experienced Project Manager who would ideally look to progress to Contracts Manager in due course with this employers unrivalled development. ( Please note : this is a nationwide role that will require regular working away. Flexible working offered but this will be dictated by individual project needs). Duties: Manage site teams and supply chain to deliver projects to quality targets and deadlines. Oversee projects 'cradle to grave' including tender, planning & programming. Writing documentation for sites. Early Warnings & Compensation Events. Working with client to achieve deadlines & build lasting relationships. Managing all contract changes - familiarity with NEC3 / NEC 4 needed. Commercial cost tracking and control for projects with Commercial team. Implement BIM to achieve effective delivery and drive safety, particularly with the use of 3D design and visualisation. Experience Required: Experience in management of civil engineering & structural projects ideally within rail or highways setting. Experience managing Bridge related schemes - bearings, deckings, movement joints, expansion joints etc. Experience in overseeing infrastructure project delivery working for main contractor - scheme values of 1m+. Knowledge of NEC contract suite. Qualifications: CSCS, SMSTS, APMP are essential. Degree or HNC/HND qualified is preferred. Remuneration: On offer is a salary of up to 65,000 (doe) plus generous package including: Car or allowance, pension, private health care, bonus scheme, death in service benefit, annual leave and more. Contact Andy Gray at Elvet Recruitment for a confidential discussion today.
Graduate Full Stack Developer (C# / React) Location: Loughton, England (On-site) Salary: 40,000 - 50,000 This is a high-impact opportunity for a passionate Graduate or Junior Developer to work at the intersection of C#/.NET, React, and Robotics. Join a multidisciplinary team developing next-generation automation for the Life Science industry. The Role Full Stack Development: Build high-performance backend services in C# and modern frontends in React. Robotics Integration: Connect cloud back-ends with physical robotic systems and laboratory devices. Mentorship: Benefit from a collaborative culture with exposure to mechanical and electronic engineering experts. Requirements Degree in Computer Science or a related field. Must provide a GitHub link or code examples (C# and React preferred). Strong understanding of OOP, design patterns, and multithreading. Proactive "can-do" attitude with a genuine interest in robotics and automation. If this role is of interest, please apply below.
Dec 18, 2025
Full time
Graduate Full Stack Developer (C# / React) Location: Loughton, England (On-site) Salary: 40,000 - 50,000 This is a high-impact opportunity for a passionate Graduate or Junior Developer to work at the intersection of C#/.NET, React, and Robotics. Join a multidisciplinary team developing next-generation automation for the Life Science industry. The Role Full Stack Development: Build high-performance backend services in C# and modern frontends in React. Robotics Integration: Connect cloud back-ends with physical robotic systems and laboratory devices. Mentorship: Benefit from a collaborative culture with exposure to mechanical and electronic engineering experts. Requirements Degree in Computer Science or a related field. Must provide a GitHub link or code examples (C# and React preferred). Strong understanding of OOP, design patterns, and multithreading. Proactive "can-do" attitude with a genuine interest in robotics and automation. If this role is of interest, please apply below.
We are currently looking to recruit an Acoustics Consultant to work near Walton on Thames for a long established noise and vibration specialist. Our client offers a unique set where you can find the full range of acoustic consultancy design and reporting services under one roof! - with expertise in environmental planning, building design and mechanical installation and solutions based engineering, you'll have the options to develop your skillset in line with your interests and strengths. You need to be degree qualified, associate or full membership of the Institute of Acoustics and have at least 1 years working experience in Acoustics. Duties will include- Undertaking noise and vibration surveys, acoustics and noise impact assessments Supporting junior staff. Writing technical reports. Using noise modelling software to predict noise from complex environments. Project management. Our client is seeking a creative and talented individual, who has excellent communication skills and is able to connect with a wide range of people. You need to have a pragmatic approach to problem solving and have a good knowledge and understanding of legislation and guidelines affecting acoustics, noise and vibration. If successful you get a competitive salary and excellent benefits. For more information or for further vacancies within the Acoustic sector please contact Amir Gharaati of Penguin Recruitment directly on (phone number removed). Alternatively you can email your CV in and we'll call you back. Emails to: (url removed)
Dec 18, 2025
Full time
We are currently looking to recruit an Acoustics Consultant to work near Walton on Thames for a long established noise and vibration specialist. Our client offers a unique set where you can find the full range of acoustic consultancy design and reporting services under one roof! - with expertise in environmental planning, building design and mechanical installation and solutions based engineering, you'll have the options to develop your skillset in line with your interests and strengths. You need to be degree qualified, associate or full membership of the Institute of Acoustics and have at least 1 years working experience in Acoustics. Duties will include- Undertaking noise and vibration surveys, acoustics and noise impact assessments Supporting junior staff. Writing technical reports. Using noise modelling software to predict noise from complex environments. Project management. Our client is seeking a creative and talented individual, who has excellent communication skills and is able to connect with a wide range of people. You need to have a pragmatic approach to problem solving and have a good knowledge and understanding of legislation and guidelines affecting acoustics, noise and vibration. If successful you get a competitive salary and excellent benefits. For more information or for further vacancies within the Acoustic sector please contact Amir Gharaati of Penguin Recruitment directly on (phone number removed). Alternatively you can email your CV in and we'll call you back. Emails to: (url removed)
Project Engineer Mechanical / Wastewater Mercury Hampton Engineering & Infrastructure Recruitment Location: UK Hybrid / Project Based Contract Type: Permanent (Contractors also considered) Salary / Rate: Competitive salary or day rate dependent on experience Sector: Water & Wastewater Treatment Wastewater experience is essential Mercury Hampton is supporting a contractor operating in the UK water and wastewater sector to appoint a Project Engineer focused on the delivery of mechanical systems across wastewater treatment projects. The client s preference is to make a permanent appointment , however experienced contractors will also be considered. The Role This is a project-level engineering role, responsible for technical coordination and delivery from design through to construction and commissioning. Key Responsibilities Technical ownership of mechanical engineering packages Coordination across mechanical, civil, process and EICA disciplines Supporting projects through design, construction and commissioning Liaison with suppliers, subcontractors and internal delivery teams Ensuring engineering solutions meet safety, cost and programme requirements Identifying and recommending engineering improvements Requirements Mechanical Engineering qualification or equivalent experience Experience delivering mechanical systems on wastewater projects Wastewater treatment plant experience essential Strong technical coordination and problem-solving skills Comfortable working in a contractor-side delivery environment
Dec 18, 2025
Full time
Project Engineer Mechanical / Wastewater Mercury Hampton Engineering & Infrastructure Recruitment Location: UK Hybrid / Project Based Contract Type: Permanent (Contractors also considered) Salary / Rate: Competitive salary or day rate dependent on experience Sector: Water & Wastewater Treatment Wastewater experience is essential Mercury Hampton is supporting a contractor operating in the UK water and wastewater sector to appoint a Project Engineer focused on the delivery of mechanical systems across wastewater treatment projects. The client s preference is to make a permanent appointment , however experienced contractors will also be considered. The Role This is a project-level engineering role, responsible for technical coordination and delivery from design through to construction and commissioning. Key Responsibilities Technical ownership of mechanical engineering packages Coordination across mechanical, civil, process and EICA disciplines Supporting projects through design, construction and commissioning Liaison with suppliers, subcontractors and internal delivery teams Ensuring engineering solutions meet safety, cost and programme requirements Identifying and recommending engineering improvements Requirements Mechanical Engineering qualification or equivalent experience Experience delivering mechanical systems on wastewater projects Wastewater treatment plant experience essential Strong technical coordination and problem-solving skills Comfortable working in a contractor-side delivery environment
PCB Designer Broad Oak Based (Mainly remote) 69.65 an hour Umbrella Inside IR35 6 Month Contract initially. This is a great opportunity to work within one of the UK's leading Defence organisations based In Broad Oak. Knowledge: Proficient experience of Cadence Allegro toolset (essential) PCB design techniques for large, complex, multi-layer, multi-substrate, PCBs. Designing for controlled impedance, high speed digital, RF, mixed signal, high current, and large FPGA technologies. Experience of blind, buried, and filled via techniques. Experience of flexible PCB and interconnecting assemblies. Skills: Ability to work with complex mechanical profiles to accommodate enclosure, structural, thermal, and screening requirements. Ability to work to ISO9001 and IPC-610 standards. Must understand detailed technical instructions and be able to communicate complex technical information to others. For more information please contact Lauren Morley at JAM Recruitment or click apply.
Dec 18, 2025
Contractor
PCB Designer Broad Oak Based (Mainly remote) 69.65 an hour Umbrella Inside IR35 6 Month Contract initially. This is a great opportunity to work within one of the UK's leading Defence organisations based In Broad Oak. Knowledge: Proficient experience of Cadence Allegro toolset (essential) PCB design techniques for large, complex, multi-layer, multi-substrate, PCBs. Designing for controlled impedance, high speed digital, RF, mixed signal, high current, and large FPGA technologies. Experience of blind, buried, and filled via techniques. Experience of flexible PCB and interconnecting assemblies. Skills: Ability to work with complex mechanical profiles to accommodate enclosure, structural, thermal, and screening requirements. Ability to work to ISO9001 and IPC-610 standards. Must understand detailed technical instructions and be able to communicate complex technical information to others. For more information please contact Lauren Morley at JAM Recruitment or click apply.
Technical Specification Manager - Scotland/North At Saint-Gobain Glass, we are looking for a Technical Specification Manager to support our SGGUK product range to all stakeholders within the glass and architectural markets. The Technical Specification Manager will be working on project opportunities and specifiers whose impact spans the UK in terms of design, procurement and supply. Also included in part of this role will also include looking after a small number of customers in a sales capacity. You will be covering predominantly the Scotland and Northeast regions requiring travel to different stakeholders, and customers. What will you be doing? Providing technical support to the Saint-Gobain Glass UK customer base, across the full product range, ensuring our products are correctly specified to current national regulations Utilising recognised calculation methods, ensuring correct and up to date data on our ranges is distributed to both direct and indirect customers Building strong relationships with influences in the wider architectural markets, to proactively identify and secure project opportunities including architects, specifiers, architectural technologists, mechanical engineers and main contractors Account manager a few select commercial accounts, supporting and driving sales Delivery of CPDs to architects and specifiers What are we looking for? Specification sales experience across the building envelope sector, with specific technical knowledge relating to glass specifications Up-to-date knowledge of relevant current building regulations and European Standards Use of technical calculation software and NBS specifications Possess great communication skills and able to build relationships with stakeholders at all levels, both internal and external Able to work successfully in a team, providing mutual support of others Are Saint-Gobain Glass inclusive employers? Saint-Gobain is the worldwide leader in light and sustainable construction improving daily life through high-performance solutions. From wherever you are, let your unique personality and our values guide you every day to invent a more sustainable world. We understand that a diverse workplace is not only a more enjoyable place to be, but also facilitates better decision making and innovation. So, whoever you are, and whichever Saint-Gobain business you join, you can be sure of a warm welcome with us. And what about flexibility? The world of work is changing. At Saint-Gobain, we're always open to new ways of working. Everyone has different needs and commitments. We'll happily discuss any need you might have for this role: flexible hours, job-sharing, part-time working, or anything else that matters to you. We can't promise to meet every request when we're recruiting. But we do promise to listen. If you match our criteria, we will be in touch to discuss your experience and more about you as a person, we look forward to hearing from you !
Dec 18, 2025
Full time
Technical Specification Manager - Scotland/North At Saint-Gobain Glass, we are looking for a Technical Specification Manager to support our SGGUK product range to all stakeholders within the glass and architectural markets. The Technical Specification Manager will be working on project opportunities and specifiers whose impact spans the UK in terms of design, procurement and supply. Also included in part of this role will also include looking after a small number of customers in a sales capacity. You will be covering predominantly the Scotland and Northeast regions requiring travel to different stakeholders, and customers. What will you be doing? Providing technical support to the Saint-Gobain Glass UK customer base, across the full product range, ensuring our products are correctly specified to current national regulations Utilising recognised calculation methods, ensuring correct and up to date data on our ranges is distributed to both direct and indirect customers Building strong relationships with influences in the wider architectural markets, to proactively identify and secure project opportunities including architects, specifiers, architectural technologists, mechanical engineers and main contractors Account manager a few select commercial accounts, supporting and driving sales Delivery of CPDs to architects and specifiers What are we looking for? Specification sales experience across the building envelope sector, with specific technical knowledge relating to glass specifications Up-to-date knowledge of relevant current building regulations and European Standards Use of technical calculation software and NBS specifications Possess great communication skills and able to build relationships with stakeholders at all levels, both internal and external Able to work successfully in a team, providing mutual support of others Are Saint-Gobain Glass inclusive employers? Saint-Gobain is the worldwide leader in light and sustainable construction improving daily life through high-performance solutions. From wherever you are, let your unique personality and our values guide you every day to invent a more sustainable world. We understand that a diverse workplace is not only a more enjoyable place to be, but also facilitates better decision making and innovation. So, whoever you are, and whichever Saint-Gobain business you join, you can be sure of a warm welcome with us. And what about flexibility? The world of work is changing. At Saint-Gobain, we're always open to new ways of working. Everyone has different needs and commitments. We'll happily discuss any need you might have for this role: flexible hours, job-sharing, part-time working, or anything else that matters to you. We can't promise to meet every request when we're recruiting. But we do promise to listen. If you match our criteria, we will be in touch to discuss your experience and more about you as a person, we look forward to hearing from you !
Principal Systems Architect - London, UK Help shape the future of robotics. As our Principal Systems Architect , you'll define the technical direction of next-generation robotic systems and work with some of the brightest engineers in the industry. If you thrive on solving complex system-level challenges and want to have real influence on product strategy, this role is for you. What You'll Do In this role, you'll be the architectural lead across our robotic platform, responsible for driving clarity, structure, and technical excellence. You will: Develop and execute system-level technical strategies aligned with our mission and long-term roadmap. Partner closely with cross-functional leaders and SMEs to design robust, scalable architectures that meet demanding product requirements. Define, document, and maintain system-level requirements and ensure alignment across mechanical, electrical, software, and AI teams. Produce clear, high-quality documentation-block diagrams, interface specifications, design narratives, and technical guidelines. Present architectural directions, design trade-offs, and technology roadmaps to senior leadership. Lead trade studies and use evidence-based decision frameworks to guide major design choices. Identify performance bottlenecks and drive architectural improvements for efficiency, reliability, and scalability. Stay ahead of industry trends and emerging technologies, especially in robotic system design. Establish technical standards and best practices, ensuring compliance with relevant industry and safety regulations. Identify and mitigate technical risks across the entire development lifecycle. Guide system integration efforts across hardware, software, AI/ML, and embedded teams to achieve high performance and reliability. What We're Looking For You bring depth, leadership, and hands-on expertise to complex robotic systems. Ideally, you have: Bachelor's, Master's, or PhD in Robotics, Computer Science, Electrical/Mechanical Engineering, or related field. 15+ years' industry experience , including 5+ years in system architecture within robotics or complex embedded systems. Strong knowledge of robotic system design - including kinematics, dynamics, control algorithms, perception systems, and simulation tools such as Gazebo or Simulink. Experience with hardware-software co-design, real-time computing, middleware, and system integration (including robotic arms, manipulators, embedded production systems, and indoor logistics). Familiarity with AI/ML integration, sensor fusion, and autonomous decision-making systems. Practical experience with embedded systems, microcontrollers, FPGAs, and high-performance computing platforms. Understanding of wireless communications, power management, and battery technologies. Outstanding problem-solving abilities, with the ability to balance performance, cost, and system complexity. A strong motivation to work more directly in robotics and hands-on system design. Willingness to relocate to London and work fully on-site (5 days/week). One-month notice period. (Salary expectations discussed individually.) What We Offer Competitive salary + participation in our Stock Option Plan Generous paid vacation aligned with local labor laws Opportunities to travel to our Vancouver and Boston offices Office perks: free breakfast, lunch, snacks, plus regular team events The freedom to influence product decisions and own major initiatives Close collaboration with world-class engineers, researchers, and product leaders in AI and robotics A fast-paced startup culture built on transparency, speed, and minimal bureaucracy Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Dec 18, 2025
Full time
Principal Systems Architect - London, UK Help shape the future of robotics. As our Principal Systems Architect , you'll define the technical direction of next-generation robotic systems and work with some of the brightest engineers in the industry. If you thrive on solving complex system-level challenges and want to have real influence on product strategy, this role is for you. What You'll Do In this role, you'll be the architectural lead across our robotic platform, responsible for driving clarity, structure, and technical excellence. You will: Develop and execute system-level technical strategies aligned with our mission and long-term roadmap. Partner closely with cross-functional leaders and SMEs to design robust, scalable architectures that meet demanding product requirements. Define, document, and maintain system-level requirements and ensure alignment across mechanical, electrical, software, and AI teams. Produce clear, high-quality documentation-block diagrams, interface specifications, design narratives, and technical guidelines. Present architectural directions, design trade-offs, and technology roadmaps to senior leadership. Lead trade studies and use evidence-based decision frameworks to guide major design choices. Identify performance bottlenecks and drive architectural improvements for efficiency, reliability, and scalability. Stay ahead of industry trends and emerging technologies, especially in robotic system design. Establish technical standards and best practices, ensuring compliance with relevant industry and safety regulations. Identify and mitigate technical risks across the entire development lifecycle. Guide system integration efforts across hardware, software, AI/ML, and embedded teams to achieve high performance and reliability. What We're Looking For You bring depth, leadership, and hands-on expertise to complex robotic systems. Ideally, you have: Bachelor's, Master's, or PhD in Robotics, Computer Science, Electrical/Mechanical Engineering, or related field. 15+ years' industry experience , including 5+ years in system architecture within robotics or complex embedded systems. Strong knowledge of robotic system design - including kinematics, dynamics, control algorithms, perception systems, and simulation tools such as Gazebo or Simulink. Experience with hardware-software co-design, real-time computing, middleware, and system integration (including robotic arms, manipulators, embedded production systems, and indoor logistics). Familiarity with AI/ML integration, sensor fusion, and autonomous decision-making systems. Practical experience with embedded systems, microcontrollers, FPGAs, and high-performance computing platforms. Understanding of wireless communications, power management, and battery technologies. Outstanding problem-solving abilities, with the ability to balance performance, cost, and system complexity. A strong motivation to work more directly in robotics and hands-on system design. Willingness to relocate to London and work fully on-site (5 days/week). One-month notice period. (Salary expectations discussed individually.) What We Offer Competitive salary + participation in our Stock Option Plan Generous paid vacation aligned with local labor laws Opportunities to travel to our Vancouver and Boston offices Office perks: free breakfast, lunch, snacks, plus regular team events The freedom to influence product decisions and own major initiatives Close collaboration with world-class engineers, researchers, and product leaders in AI and robotics A fast-paced startup culture built on transparency, speed, and minimal bureaucracy Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
HV Mechanical & Electrical Fitters - Location : South Wales & South England Rates : 25- 30 an hour CIS Start date : ASAP Duration: 6 months + Turner Lovell's client is a leading electrical engineering company based in the UK with a successful track record delivering electricity transmission and distribution projects across the country and Europe. You will be working for a company that prioritizes investment in both their staff and cutting-edge technology, and this commitment has propelled them to become a major player in the energy sector. Turner Lovell is currently seeking experienced HV Fitters to join our client's team working on renewable energy projects throughout the UK. These specific roles are based in Newport, Wales and Trowbridge, England with a project duration of approximately 6 months. You will be involved in various electrical installation activities, including new builds, extensions to existing infrastructure, and high-voltage projects Duties: Installation of earthing systems Erection of steelwork to pre-defined design Measuring and installing busbar and clamps Building and setting of disconnectors, installation of MV and power equipment (switchgear, CT's, VT's, LV) Understand RAMS, SHEQ procedures and attend tool-box talks Electrical installation of switch gear, transformers and protection and control equipment Requirements: Tickets required for the position: CCNSG/CSCS - Safety Passport, Manual Handling, Fire Safety, National Grid Person Authorisations required 360 Telehandler and Lift Supervisor desired Further qualification (HNC, HND, Degree, apprenticeship, NVQ) - desirable Experience working on a project in a H&S critical environment Ability to work both independently and within a team Willingness to learn, communicate and uphold SHEQ / other required standards, whilst on site Knowledge as well as working experience of fitting regulations (Fitter) If you are looking to be involved in your next major renewable energy project as an HV Fitter, please apply & contact Marcus Horne - (url removed) or call (phone number removed)
Dec 17, 2025
Contractor
HV Mechanical & Electrical Fitters - Location : South Wales & South England Rates : 25- 30 an hour CIS Start date : ASAP Duration: 6 months + Turner Lovell's client is a leading electrical engineering company based in the UK with a successful track record delivering electricity transmission and distribution projects across the country and Europe. You will be working for a company that prioritizes investment in both their staff and cutting-edge technology, and this commitment has propelled them to become a major player in the energy sector. Turner Lovell is currently seeking experienced HV Fitters to join our client's team working on renewable energy projects throughout the UK. These specific roles are based in Newport, Wales and Trowbridge, England with a project duration of approximately 6 months. You will be involved in various electrical installation activities, including new builds, extensions to existing infrastructure, and high-voltage projects Duties: Installation of earthing systems Erection of steelwork to pre-defined design Measuring and installing busbar and clamps Building and setting of disconnectors, installation of MV and power equipment (switchgear, CT's, VT's, LV) Understand RAMS, SHEQ procedures and attend tool-box talks Electrical installation of switch gear, transformers and protection and control equipment Requirements: Tickets required for the position: CCNSG/CSCS - Safety Passport, Manual Handling, Fire Safety, National Grid Person Authorisations required 360 Telehandler and Lift Supervisor desired Further qualification (HNC, HND, Degree, apprenticeship, NVQ) - desirable Experience working on a project in a H&S critical environment Ability to work both independently and within a team Willingness to learn, communicate and uphold SHEQ / other required standards, whilst on site Knowledge as well as working experience of fitting regulations (Fitter) If you are looking to be involved in your next major renewable energy project as an HV Fitter, please apply & contact Marcus Horne - (url removed) or call (phone number removed)
Solar PV O&M Engineer - Leeds / UK Project: Operation and maintenance of solar PV systems across commercial, rooftop, and ground-mounted sites Location: Leeds / travel throughout the UK Job Type: Permanent Reporting into: O&M Manager Why Join? A fantastic chance to develop your technical expertise in solar PV systems while contributing to high-profile renewable energy projects. Play a pivotal role in maintaining and optimising solar PV assets, ensuring maximum efficiency, safety, and compliance with regulations. Join a collaborative team environment that encourages technical skill, problem-solving, and ongoing professional growth. What We're Looking For Relevant Qualifications: Level 3 City & Guilds / NVQ in Electrical Installations (or equivalent) 18th Edition BS7671 Wiring Regulations City & Guilds 2391 - Inspection & Testing (or equivalent) ECS Gold Card SMSTS - Site Management Safety Training Scheme Working at Height Certification IPAF / PASMA Experience: At least 2-3 years' experience in solar PV installation, operation, and maintenance, preferably on commercial rooftops or ground-mounted systems. Solid experience with AC/DC systems, inverters, fault diagnosis, and electrical safety protocols. Familiarity with monitoring platforms such as SolarEdge or Hark is beneficial. Key Skills: Methodical and analytical approach to troubleshooting electrical and technical issues. Experienced in performing preventative and corrective maintenance on PV systems. Competent in AC/DC testing, thermographic surveys, and torque inspections. Ability to interpret performance data, benchmark against expected outputs, and report findings effectively. Strong knowledge of health and safety standards within renewable energy environments. Excellent written and verbal communication for producing clear technical reports and logs. Willingness and ability to travel extensively across the UK, including overnight site visits. About the Company Our client is a is a well-established electrical and mechanical engineering subcontractor, with a strong foundation built on years of industry expertise. They hold an extensive portfolio and order book managing major projects across the UK. They specialise in designing and installing building services nationwide, with a proven track record of delivering high-quality and safe solutions across education, residential, aviation, leisure, and commercial developments. The Opportunity We are looking for a skilled Solar PV O&M Engineer to join the team, supporting the ongoing operation and maintenance of client-owned solar PV assets across the UK. You will ensure systems are safe, efficient, and fully compliant with industry standards. Key Responsibilities: Carry out scheduled and reactive maintenance on commercial and ground-mounted PV installations. Conduct detailed inspections of PV modules, inverters, mounting structures, and electrical components. Perform AC/DC electrical testing, thermographic surveys, and torque checks. Diagnose and resolve faults across PV systems efficiently. Monitor system performance via solar monitoring platforms, assessing yield, availability, and efficiency. Prepare detailed maintenance logs, reports, and technical recommendations. Ensure all work adheres to health, safety, and regulatory requirements. Serve as a technical point of contact between clients, subcontractors, and project teams. Contact Details: Ollie Foley - Recruitment Consultant T: (phone number removed)
Dec 17, 2025
Full time
Solar PV O&M Engineer - Leeds / UK Project: Operation and maintenance of solar PV systems across commercial, rooftop, and ground-mounted sites Location: Leeds / travel throughout the UK Job Type: Permanent Reporting into: O&M Manager Why Join? A fantastic chance to develop your technical expertise in solar PV systems while contributing to high-profile renewable energy projects. Play a pivotal role in maintaining and optimising solar PV assets, ensuring maximum efficiency, safety, and compliance with regulations. Join a collaborative team environment that encourages technical skill, problem-solving, and ongoing professional growth. What We're Looking For Relevant Qualifications: Level 3 City & Guilds / NVQ in Electrical Installations (or equivalent) 18th Edition BS7671 Wiring Regulations City & Guilds 2391 - Inspection & Testing (or equivalent) ECS Gold Card SMSTS - Site Management Safety Training Scheme Working at Height Certification IPAF / PASMA Experience: At least 2-3 years' experience in solar PV installation, operation, and maintenance, preferably on commercial rooftops or ground-mounted systems. Solid experience with AC/DC systems, inverters, fault diagnosis, and electrical safety protocols. Familiarity with monitoring platforms such as SolarEdge or Hark is beneficial. Key Skills: Methodical and analytical approach to troubleshooting electrical and technical issues. Experienced in performing preventative and corrective maintenance on PV systems. Competent in AC/DC testing, thermographic surveys, and torque inspections. Ability to interpret performance data, benchmark against expected outputs, and report findings effectively. Strong knowledge of health and safety standards within renewable energy environments. Excellent written and verbal communication for producing clear technical reports and logs. Willingness and ability to travel extensively across the UK, including overnight site visits. About the Company Our client is a is a well-established electrical and mechanical engineering subcontractor, with a strong foundation built on years of industry expertise. They hold an extensive portfolio and order book managing major projects across the UK. They specialise in designing and installing building services nationwide, with a proven track record of delivering high-quality and safe solutions across education, residential, aviation, leisure, and commercial developments. The Opportunity We are looking for a skilled Solar PV O&M Engineer to join the team, supporting the ongoing operation and maintenance of client-owned solar PV assets across the UK. You will ensure systems are safe, efficient, and fully compliant with industry standards. Key Responsibilities: Carry out scheduled and reactive maintenance on commercial and ground-mounted PV installations. Conduct detailed inspections of PV modules, inverters, mounting structures, and electrical components. Perform AC/DC electrical testing, thermographic surveys, and torque checks. Diagnose and resolve faults across PV systems efficiently. Monitor system performance via solar monitoring platforms, assessing yield, availability, and efficiency. Prepare detailed maintenance logs, reports, and technical recommendations. Ensure all work adheres to health, safety, and regulatory requirements. Serve as a technical point of contact between clients, subcontractors, and project teams. Contact Details: Ollie Foley - Recruitment Consultant T: (phone number removed)
Project Design Engineer Location: Manchester Salary: Circa 40K - 50K + Benefits Project Design Engineer required by a leading UK company delivering large-scale Engineered Solutions! This is a hands-on and rewarding role where no two days are the same. You ll work closely with the sales team to help secure new business by developing smart, practical design solutions that turn exhibition and retail concepts into real, buildable structures You ll also play a key role in supporting the production team, providing clear guidance on fabrication, assembly and installation methods. From creating detailed 2D and 3D drawings in SolidWorks for bespoke displays and structural elements, to managing multiple live projects from concept through to completion, you ll be involved in the full lifecycle of every project Experience: Experience in sheet metal, fabrication, exhibition or retail display design Strong CAD design and drawing experience (SolidWorks essential) Mechanically minded with a practical understanding of how structures fit together Comfortable working on multiple projects simultaneously Clear and confident communicator, able to liaise effectively across sales, clients and production teams Nice-to-have: Formal engineering qualification A tremendous opportunity offering plenty of scope for career progression in a friendly, innovative environment where you ll see your designs move from concept to production! Apply now for FULL details!
Dec 17, 2025
Full time
Project Design Engineer Location: Manchester Salary: Circa 40K - 50K + Benefits Project Design Engineer required by a leading UK company delivering large-scale Engineered Solutions! This is a hands-on and rewarding role where no two days are the same. You ll work closely with the sales team to help secure new business by developing smart, practical design solutions that turn exhibition and retail concepts into real, buildable structures You ll also play a key role in supporting the production team, providing clear guidance on fabrication, assembly and installation methods. From creating detailed 2D and 3D drawings in SolidWorks for bespoke displays and structural elements, to managing multiple live projects from concept through to completion, you ll be involved in the full lifecycle of every project Experience: Experience in sheet metal, fabrication, exhibition or retail display design Strong CAD design and drawing experience (SolidWorks essential) Mechanically minded with a practical understanding of how structures fit together Comfortable working on multiple projects simultaneously Clear and confident communicator, able to liaise effectively across sales, clients and production teams Nice-to-have: Formal engineering qualification A tremendous opportunity offering plenty of scope for career progression in a friendly, innovative environment where you ll see your designs move from concept to production! Apply now for FULL details!
Mechanical Engineer - Contract Location: Bristol (hybrid) Duration: 12 Months Rate: Up to 50/hour (Inside IR35 - Umbrella only) About the Role: Our client is seeking a Mechanical Engineer to join their cutting-edge robotics and inspection technology team. This is an exciting opportunity to work within a fast-paced, collaborative environment, supporting the development of on-wing engine inspection tools and automation systems. Key Responsibilities: Support engineering and production teams with mechanical design and assembly tasks Produce and review 3D CAD models and technical drawings (Autodesk Inventor) Assist with technical documentation: SOPs, BoMs, QA notes, and build procedures Participate in mechanical testing, jig setup, QA, and workshop-based tasks Communicate clearly with technical and non-technical stakeholders Occasional travel within the UK for product testing and support Essential Requirements: Proven experience in CAD and mechanical drawing (Autodesk Inventor preferred) Hands-on workshop skills with power and hand tools Familiarity with production tooling, QA processes, and technical documentation Experience working in small, agile engineering teams Understanding of engineering validation and verification processes Desirable Skills: Experience with 3D printing (FDM/SLA) Exposure to quality engineering tools such as CMM, gauges, and metrology Personal Attributes: Proactive, organised, and detail-oriented Strong team player and clear communicator Comfortable adapting to changing priorities in a dynamic environment Interested? Apply now to join a forward-thinking team developing tomorrow's aerospace inspection technologies.
Dec 17, 2025
Contractor
Mechanical Engineer - Contract Location: Bristol (hybrid) Duration: 12 Months Rate: Up to 50/hour (Inside IR35 - Umbrella only) About the Role: Our client is seeking a Mechanical Engineer to join their cutting-edge robotics and inspection technology team. This is an exciting opportunity to work within a fast-paced, collaborative environment, supporting the development of on-wing engine inspection tools and automation systems. Key Responsibilities: Support engineering and production teams with mechanical design and assembly tasks Produce and review 3D CAD models and technical drawings (Autodesk Inventor) Assist with technical documentation: SOPs, BoMs, QA notes, and build procedures Participate in mechanical testing, jig setup, QA, and workshop-based tasks Communicate clearly with technical and non-technical stakeholders Occasional travel within the UK for product testing and support Essential Requirements: Proven experience in CAD and mechanical drawing (Autodesk Inventor preferred) Hands-on workshop skills with power and hand tools Familiarity with production tooling, QA processes, and technical documentation Experience working in small, agile engineering teams Understanding of engineering validation and verification processes Desirable Skills: Experience with 3D printing (FDM/SLA) Exposure to quality engineering tools such as CMM, gauges, and metrology Personal Attributes: Proactive, organised, and detail-oriented Strong team player and clear communicator Comfortable adapting to changing priorities in a dynamic environment Interested? Apply now to join a forward-thinking team developing tomorrow's aerospace inspection technologies.
My Client is recruiting for a Senior Mechanical Engineer in the Water Sector Are you ready to take up a vital role in shaping some of our exciting projects? How about joining our talented team, where everyone has a voice, and together we face our clients' challenges head-on. It's a diverse and inclusive work environment where world-class talent knows no distinctions. Bring your skills to the mix as a Senior Mechanical Engineer, you'll play a vital role in every aspect of mechanical engineering on Transformational Programmes for critical UK infrastructure with opportunities to work on iconic engineering projects at home and abroad. We specialise in all aspects of mechanical engineering, within multiple challenging and engaging sectors such as Water, Aviation, Defence, Energy, Cities & Development and Education. We continue to provide industry-leading mechanical engineering solutions right through the project lifecycle, with value added through client-side support as well as construction phases. We are looking for Engineers to join our Water Team. Your Purpose: Manage a team to undertake technical design work following relevant design standards and codes, and to high-quality levels. Prepare briefs, scopes of work, and input into bid proposals. Successfully manage time and budgets to key project milestones and programmes. Work closely with teams in the UK and overseas to deliver integrated design solutions. Adhere to quality assurance standards in design. What you can bring: Chartered Mechanical Engineer. Experience in the Water/Wastewater Sector Experience in design delivery, including multidisciplinary design. Sound knowledge in mechanical equipment, such as pumps, blowers, screens and chemical dosing plant as well as an in-depth understanding of current UK design standards and working practices. Strong understanding of legislation such as CDM and ATEX.
Dec 17, 2025
Full time
My Client is recruiting for a Senior Mechanical Engineer in the Water Sector Are you ready to take up a vital role in shaping some of our exciting projects? How about joining our talented team, where everyone has a voice, and together we face our clients' challenges head-on. It's a diverse and inclusive work environment where world-class talent knows no distinctions. Bring your skills to the mix as a Senior Mechanical Engineer, you'll play a vital role in every aspect of mechanical engineering on Transformational Programmes for critical UK infrastructure with opportunities to work on iconic engineering projects at home and abroad. We specialise in all aspects of mechanical engineering, within multiple challenging and engaging sectors such as Water, Aviation, Defence, Energy, Cities & Development and Education. We continue to provide industry-leading mechanical engineering solutions right through the project lifecycle, with value added through client-side support as well as construction phases. We are looking for Engineers to join our Water Team. Your Purpose: Manage a team to undertake technical design work following relevant design standards and codes, and to high-quality levels. Prepare briefs, scopes of work, and input into bid proposals. Successfully manage time and budgets to key project milestones and programmes. Work closely with teams in the UK and overseas to deliver integrated design solutions. Adhere to quality assurance standards in design. What you can bring: Chartered Mechanical Engineer. Experience in the Water/Wastewater Sector Experience in design delivery, including multidisciplinary design. Sound knowledge in mechanical equipment, such as pumps, blowers, screens and chemical dosing plant as well as an in-depth understanding of current UK design standards and working practices. Strong understanding of legislation such as CDM and ATEX.
Mechanical Fitter South Bristol Upto 18ph PAYE/ 23.20 umbrella +Overtime + Pension + Benefits + Parking + Subsidised Canteen Contract basis, ongoing Key Skills: Machine Build / Electro-mechanical / Mechanical / Assembly / Special Purpose Machinery Mechanical Fitter sought within a well-established and internationally recognised company. The company are a top competitor within their industry. The role will be suited to experienced mechanical Assemblers from a manufacturing background but those with other relevant experience should also apply. The assembly must be able to work independently and be able to read engineering drawings and work to timescales set to them. You will be responsible for building machines from engineering drawings and diagrams and precision assembly/fitting. You will also have to understand parts lists and relate back to engineering drawings and liaise with design engineers and other assembly fitters. This Role is a fantastic opportunity for experienced mechanical fitters looking for a role within an established manufacturer offering stable and ongoing work. Responsibilities: Follow all department procedures Assemble parts to the required specification including: Sub-assemblies Machine build Machine panel build Complete any quality documentation required for the tasks Identify problems with assemblies / parts and raise any quality issues following the company procedures Operate handling equipment and machinery when trained to do so Support in the implementation and sustainment of 5S standards Assist in the achievement of the Assembly operational plan Knowledge and Skills: Previous mechanical assembly experience in a machine manufacturing environment Experience of assembling large fabricated parts to engineering drawings Able to read engineering drawings and understand Bill of Materials Ability to understand mechanical design assembly Good dexterity with the ability to handle a variety of parts including sheet metal, machined and electrical components Good verbal and written communication skills Computer literate Able to work under pressure and to tight deadlines Lean manufacturing knowledge About BMR Solutions: BMR Solutions operates as an Employment Business and Employment Agency. We specialise in recruiting skilled engineers and manufacturing professionals across the Southwest. By submitting your application, you acknowledge that BMR Solutions will process your personal data for the purposes of recruitment, in line with our Privacy Policy. We will only share your details with client organisations after we have discussed the opportunity with you and obtained your explicit consent. We celebrate diversity and are committed to creating an inclusive environment for all employees. Applications are welcomed from all backgrounds.
Dec 17, 2025
Full time
Mechanical Fitter South Bristol Upto 18ph PAYE/ 23.20 umbrella +Overtime + Pension + Benefits + Parking + Subsidised Canteen Contract basis, ongoing Key Skills: Machine Build / Electro-mechanical / Mechanical / Assembly / Special Purpose Machinery Mechanical Fitter sought within a well-established and internationally recognised company. The company are a top competitor within their industry. The role will be suited to experienced mechanical Assemblers from a manufacturing background but those with other relevant experience should also apply. The assembly must be able to work independently and be able to read engineering drawings and work to timescales set to them. You will be responsible for building machines from engineering drawings and diagrams and precision assembly/fitting. You will also have to understand parts lists and relate back to engineering drawings and liaise with design engineers and other assembly fitters. This Role is a fantastic opportunity for experienced mechanical fitters looking for a role within an established manufacturer offering stable and ongoing work. Responsibilities: Follow all department procedures Assemble parts to the required specification including: Sub-assemblies Machine build Machine panel build Complete any quality documentation required for the tasks Identify problems with assemblies / parts and raise any quality issues following the company procedures Operate handling equipment and machinery when trained to do so Support in the implementation and sustainment of 5S standards Assist in the achievement of the Assembly operational plan Knowledge and Skills: Previous mechanical assembly experience in a machine manufacturing environment Experience of assembling large fabricated parts to engineering drawings Able to read engineering drawings and understand Bill of Materials Ability to understand mechanical design assembly Good dexterity with the ability to handle a variety of parts including sheet metal, machined and electrical components Good verbal and written communication skills Computer literate Able to work under pressure and to tight deadlines Lean manufacturing knowledge About BMR Solutions: BMR Solutions operates as an Employment Business and Employment Agency. We specialise in recruiting skilled engineers and manufacturing professionals across the Southwest. By submitting your application, you acknowledge that BMR Solutions will process your personal data for the purposes of recruitment, in line with our Privacy Policy. We will only share your details with client organisations after we have discussed the opportunity with you and obtained your explicit consent. We celebrate diversity and are committed to creating an inclusive environment for all employees. Applications are welcomed from all backgrounds.
About Holcim We are leaders in supplying innovative, sustainable building solutions to the UK construction industry; building progress for people and the planet. Since 1858, weve helped shape the UK; powering the construction of homes and hospitals, roads and railways, schools and cities alike. Our mission is to make sustainable construction a reality, through purposeful action that tackles real carbon and climate challenges. We are dedicated to helping Britain grow and thrive - by doing the right thing, doing it together, and making a difference. Holcim UK Company Benefits Competitive Salary, plus bonus, 25 days holiday + your local bank holidays (with options to increase) and other benefits - all recognising the contribution you bring Be valued and supported, working as part of a highly respected team in a business that has a huge focus on Health & Safety We care about you and your family. Thats why we offer enhanced family benefits, including maternity, paternity, and adoption leave. We understand that your personal life and family well-being are just as important as your career, so were committed to supporting you every step of the way. Be part of something bigger with our "Women Empowered - Stronger Together Mentor Program," designed to support, inspire, and uplift women across the business. Free 24/7 remote GP service for you and your household, offering medical advice, prescriptions, referrals, and same-day appointments. Opportunities for career progression both at home and abroad Join our affinity groups selected by and populated by our employees which bring together employees with similar backgrounds and interests to have powerful influence on the workplace Staff discounts including special rates for garden landscaping products The Opportunity This is a fantastic opportunity to start your career in a hands on Mechanical Apprenticeship within our production and engineering team. Youll be based on site, working alongside experienced engineers and technicians who will support you as you learn how to maintain and improve our industrial, manufacturing equipment and infrastructure across the site. This role is perfect for someone who enjoys practical work, problem solving and understanding how machinery and mechanical systems work. Youll spend most of your time on site, working alongside experienced engineers and technicians who want to see you succeed. They will show you how our equipment works, how to maintain it and how to fix issues when they happen, but your curiosity and willingness to get involved will be what helps you grow quickly. You will gain real industry experience, a recognised qualification and the chance to build a long term career in a growing and innovative sector. Youll learn how to work safely in an engineering environment, follow planned maintenance routines and support with fixing breakdowns when they occur. You will get hands on experience inspecting mechanical systems, carrying out preventative maintenance and support with fixing mechanical breakdowns when they happen. Who you are You will enjoy working in a practical environment and have a keen interest in how machines and mechanical systems work. You are naturally curious and like asking questions so you can learn and improve. You notice small details that others might miss, and that skill will help you succeed when inspecting equipment and supporting maintenance tasks. You feel confident following clear processes and instructions, especially when it comes to safety, and you understand the importance of keeping yourself and others safe at work. Most importantly, you are motivated, eager to learn and ready to build a long term career in engineering. We are committed to building a diverse environment and are proud to be an equal opportunity employer. You will receive consideration for employment without regard to race, religion, gender, gender identity or expression, sexual orientation, national origin, disability or age. JBRP1_UKTJ
Dec 17, 2025
Full time
About Holcim We are leaders in supplying innovative, sustainable building solutions to the UK construction industry; building progress for people and the planet. Since 1858, weve helped shape the UK; powering the construction of homes and hospitals, roads and railways, schools and cities alike. Our mission is to make sustainable construction a reality, through purposeful action that tackles real carbon and climate challenges. We are dedicated to helping Britain grow and thrive - by doing the right thing, doing it together, and making a difference. Holcim UK Company Benefits Competitive Salary, plus bonus, 25 days holiday + your local bank holidays (with options to increase) and other benefits - all recognising the contribution you bring Be valued and supported, working as part of a highly respected team in a business that has a huge focus on Health & Safety We care about you and your family. Thats why we offer enhanced family benefits, including maternity, paternity, and adoption leave. We understand that your personal life and family well-being are just as important as your career, so were committed to supporting you every step of the way. Be part of something bigger with our "Women Empowered - Stronger Together Mentor Program," designed to support, inspire, and uplift women across the business. Free 24/7 remote GP service for you and your household, offering medical advice, prescriptions, referrals, and same-day appointments. Opportunities for career progression both at home and abroad Join our affinity groups selected by and populated by our employees which bring together employees with similar backgrounds and interests to have powerful influence on the workplace Staff discounts including special rates for garden landscaping products The Opportunity This is a fantastic opportunity to start your career in a hands on Mechanical Apprenticeship within our production and engineering team. Youll be based on site, working alongside experienced engineers and technicians who will support you as you learn how to maintain and improve our industrial, manufacturing equipment and infrastructure across the site. This role is perfect for someone who enjoys practical work, problem solving and understanding how machinery and mechanical systems work. Youll spend most of your time on site, working alongside experienced engineers and technicians who want to see you succeed. They will show you how our equipment works, how to maintain it and how to fix issues when they happen, but your curiosity and willingness to get involved will be what helps you grow quickly. You will gain real industry experience, a recognised qualification and the chance to build a long term career in a growing and innovative sector. Youll learn how to work safely in an engineering environment, follow planned maintenance routines and support with fixing breakdowns when they occur. You will get hands on experience inspecting mechanical systems, carrying out preventative maintenance and support with fixing mechanical breakdowns when they happen. Who you are You will enjoy working in a practical environment and have a keen interest in how machines and mechanical systems work. You are naturally curious and like asking questions so you can learn and improve. You notice small details that others might miss, and that skill will help you succeed when inspecting equipment and supporting maintenance tasks. You feel confident following clear processes and instructions, especially when it comes to safety, and you understand the importance of keeping yourself and others safe at work. Most importantly, you are motivated, eager to learn and ready to build a long term career in engineering. We are committed to building a diverse environment and are proud to be an equal opportunity employer. You will receive consideration for employment without regard to race, religion, gender, gender identity or expression, sexual orientation, national origin, disability or age. JBRP1_UKTJ
