Mobile HVAC Engineer - 40,000 + Benefits Location: North Are you an experienced HVAC Engineer looking for a role with variety, autonomy, and the opportunity to work with market-leading ventilation technology? My client, a highly respected manufacturer within the HVAC sector, is seeking a Mobile HVAC Engineer to join their expanding Service & Commissioning team. This is an excellent opportunity to work nationwide on advanced Air Handling Units (AHUs) and specialist ventilation systems across commercial, leisure, and pool sectors. The Role As a Mobile HVAC Engineer, you will be responsible for commissioning, maintaining, and fault-finding on a wide range of AHUs and associated HVAC equipment. You'll work closely with customers on-site, ensuring systems are installed, integrated, and performing to the highest standards. Key Responsibilities Commission, maintain, and troubleshoot AHUs and ventilation systems. Set up and integrate controls using Modbus/BACnet for BMS connectivity. Conduct F-Gas inspections, leak tests, and refrigerant reporting (training available). Produce accurate service reports, commissioning documents, and refrigerant logs. Communicate clearly with customers, providing updates and technical explanations. Support with dehumidification/humidification systems and pool AHUs (advantageous). Carry out electrical troubleshooting and assist with wiring modifications. Work independently or as part of a team, with flexibility for UK travel and overnight stays. Identify, diagnose, and report technical issues efficiently and professionally. Essential Requirements Proven HVAC engineering experience, specifically AHU commissioning. Knowledge of Modbus/BACnet controls and protocols. Good understanding of ventilation standards and energy-efficient system operation. Strong customer communication and professional conduct. Flexible approach to nationwide travel and mobile working. High level of accuracy and attention to detail in documentation. F-Gas qualification (or willingness to train). Full UK driving licence. Desirable Experience Experience with pool AHUs and specialist environmental controls. Dehumidification/humidification system knowledge. Electrical installation and fault-finding capabilities. Additional HVAC-related certifications. What's on Offer 40,000 salary Travel allowances and expenses Full product and controls training (including F-Gas if required) Supportive and collaborative team culture Clear progression and development opportunities Work with advanced, energy-efficient AHU technology and modern BMS systems How to Apply If you're a motivated HVAC professional looking to take the next step in your career, please apply with your CV and a brief overview of your relevant experience.
Jan 12, 2026
Full time
Mobile HVAC Engineer - 40,000 + Benefits Location: North Are you an experienced HVAC Engineer looking for a role with variety, autonomy, and the opportunity to work with market-leading ventilation technology? My client, a highly respected manufacturer within the HVAC sector, is seeking a Mobile HVAC Engineer to join their expanding Service & Commissioning team. This is an excellent opportunity to work nationwide on advanced Air Handling Units (AHUs) and specialist ventilation systems across commercial, leisure, and pool sectors. The Role As a Mobile HVAC Engineer, you will be responsible for commissioning, maintaining, and fault-finding on a wide range of AHUs and associated HVAC equipment. You'll work closely with customers on-site, ensuring systems are installed, integrated, and performing to the highest standards. Key Responsibilities Commission, maintain, and troubleshoot AHUs and ventilation systems. Set up and integrate controls using Modbus/BACnet for BMS connectivity. Conduct F-Gas inspections, leak tests, and refrigerant reporting (training available). Produce accurate service reports, commissioning documents, and refrigerant logs. Communicate clearly with customers, providing updates and technical explanations. Support with dehumidification/humidification systems and pool AHUs (advantageous). Carry out electrical troubleshooting and assist with wiring modifications. Work independently or as part of a team, with flexibility for UK travel and overnight stays. Identify, diagnose, and report technical issues efficiently and professionally. Essential Requirements Proven HVAC engineering experience, specifically AHU commissioning. Knowledge of Modbus/BACnet controls and protocols. Good understanding of ventilation standards and energy-efficient system operation. Strong customer communication and professional conduct. Flexible approach to nationwide travel and mobile working. High level of accuracy and attention to detail in documentation. F-Gas qualification (or willingness to train). Full UK driving licence. Desirable Experience Experience with pool AHUs and specialist environmental controls. Dehumidification/humidification system knowledge. Electrical installation and fault-finding capabilities. Additional HVAC-related certifications. What's on Offer 40,000 salary Travel allowances and expenses Full product and controls training (including F-Gas if required) Supportive and collaborative team culture Clear progression and development opportunities Work with advanced, energy-efficient AHU technology and modern BMS systems How to Apply If you're a motivated HVAC professional looking to take the next step in your career, please apply with your CV and a brief overview of your relevant experience.
Senior Mechanical / HVAC Project Manager Job Reference: SMPM Job Location: United Kingdom, Manchester Job Type: Permanent Posted a day ago Manchester (within 1 hours commute) As a Senior Mechanical / HVAC Project Manager, you will oversee the delivery of medium to large scale mechanical and HVAC projects, ensuring they are completed on time, within budget, and to the highest technical and safety standards. This is a key leadership role that requires strong technical expertise, excellent client communication, and the ability to manage multidisciplinary teams. Key Responsibilities Lead and manage full project life cycle - from design review and planning to installation, commissioning, and handover. Oversee all mechanical and HVAC works including ventilation, heating, cooling, chilled water, boilers, pipework, duct work, and associated systems. Manage project budgets, financial forecasting, cost control, and commercial reporting. Coordinate subcontractors, engineers, suppliers, and site teams to ensure seamless project delivery. Conduct site inspections, progress meetings, and quality assurance checks. Ensure compliance with all relevant legislation, standards, and H&S requirements. Build strong relationships with clients, consultants, and stakeholders, acting as the main point of contact throughout the project. Identify and resolve technical or operational challenges proactively. Contribute to value engineering, tendering input, and project planning activities. About You Proven track record as a Mechanical Project Manager or Senior Project Manager within HVAC or building services. Strong technical knowledge of mechanical systems, HVAC plant, controls, pipework, and associated services. Demonstrable experience leading projects of high value. Capable of managing multiple projects and teams simultaneously. Excellent communication, leadership, and stakeholder management skills. Strong commercial awareness and familiarity with project financials. Comprehensive understanding of UK building regulations and industry standards. HNC/HND, Degree, or trade background in Mechanical Engineering / Building Services. Experience within specialist sectors such as healthcare, education, industrial, clean rooms, or data centres. SMSTS, CSCS, and relevant safety qualifications. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Jan 12, 2026
Full time
Senior Mechanical / HVAC Project Manager Job Reference: SMPM Job Location: United Kingdom, Manchester Job Type: Permanent Posted a day ago Manchester (within 1 hours commute) As a Senior Mechanical / HVAC Project Manager, you will oversee the delivery of medium to large scale mechanical and HVAC projects, ensuring they are completed on time, within budget, and to the highest technical and safety standards. This is a key leadership role that requires strong technical expertise, excellent client communication, and the ability to manage multidisciplinary teams. Key Responsibilities Lead and manage full project life cycle - from design review and planning to installation, commissioning, and handover. Oversee all mechanical and HVAC works including ventilation, heating, cooling, chilled water, boilers, pipework, duct work, and associated systems. Manage project budgets, financial forecasting, cost control, and commercial reporting. Coordinate subcontractors, engineers, suppliers, and site teams to ensure seamless project delivery. Conduct site inspections, progress meetings, and quality assurance checks. Ensure compliance with all relevant legislation, standards, and H&S requirements. Build strong relationships with clients, consultants, and stakeholders, acting as the main point of contact throughout the project. Identify and resolve technical or operational challenges proactively. Contribute to value engineering, tendering input, and project planning activities. About You Proven track record as a Mechanical Project Manager or Senior Project Manager within HVAC or building services. Strong technical knowledge of mechanical systems, HVAC plant, controls, pipework, and associated services. Demonstrable experience leading projects of high value. Capable of managing multiple projects and teams simultaneously. Excellent communication, leadership, and stakeholder management skills. Strong commercial awareness and familiarity with project financials. Comprehensive understanding of UK building regulations and industry standards. HNC/HND, Degree, or trade background in Mechanical Engineering / Building Services. Experience within specialist sectors such as healthcare, education, industrial, clean rooms, or data centres. SMSTS, CSCS, and relevant safety qualifications. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
HVAC Engineer Kent London Surrounding Areas 30,000 to 36,000 basic, bonus, overtime, company van, fuel card, 33 days holiday, paid lunch, pension, healthcare Are you a Mechanical Ventilation Engineer who wants to be part of a close-knit team where quality, training and people actually matter? Do you want to build a long-term career in renewables with manufacturer-led training and real support from leadership, not just another service role? This is a fantastic opportunity to join a well established renewable energy specialist that has been operating since 1999 and has been installing renewable technology long before it became fashionable. The business works heavily within social housing and commercial environments and prides itself on protecting its engineers, maintaining high standards and delivering quality over volume. You will be joining a close-knit mechanical team where engineers are trusted to work independently day to day but are fully supported by an operations director, managers and team leaders who are visible, approachable and hands on. There is a strong culture of feedback, regular resets, team collaboration and open communication right up to quarterly sessions with the CEO. Training is a huge part of this role. You will have access to a dedicated training centre, internal and external courses and manufacturer-led training across MVHR, MEV and PIV systems. Whether you want to deepen your technical skillset, gain additional qualifications or simply be excellent at what you do, you will be supported every step of the way. The person Experience working with MVHR, MEV or PIV systems or a strong ventilation background NVQ Level 2 or 3 in Ventilation, Plumbing or Building Services or equivalent Full UK driving licence Customer facing and respectful with the ability to represent the company professionally The right attitude, takes pride in work and values being part of a team The role Service, maintenance, fault finding and repairs on mechanical ventilation systems Planned and reactive works across social housing and commercial sites Commissioning, airflow testing and system performance checks Completing reports and documentation to a high standard Working Monday to Friday, 8am to 5pm with paid lunch and optional overtime Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Maleek Randley at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Jan 12, 2026
Full time
HVAC Engineer Kent London Surrounding Areas 30,000 to 36,000 basic, bonus, overtime, company van, fuel card, 33 days holiday, paid lunch, pension, healthcare Are you a Mechanical Ventilation Engineer who wants to be part of a close-knit team where quality, training and people actually matter? Do you want to build a long-term career in renewables with manufacturer-led training and real support from leadership, not just another service role? This is a fantastic opportunity to join a well established renewable energy specialist that has been operating since 1999 and has been installing renewable technology long before it became fashionable. The business works heavily within social housing and commercial environments and prides itself on protecting its engineers, maintaining high standards and delivering quality over volume. You will be joining a close-knit mechanical team where engineers are trusted to work independently day to day but are fully supported by an operations director, managers and team leaders who are visible, approachable and hands on. There is a strong culture of feedback, regular resets, team collaboration and open communication right up to quarterly sessions with the CEO. Training is a huge part of this role. You will have access to a dedicated training centre, internal and external courses and manufacturer-led training across MVHR, MEV and PIV systems. Whether you want to deepen your technical skillset, gain additional qualifications or simply be excellent at what you do, you will be supported every step of the way. The person Experience working with MVHR, MEV or PIV systems or a strong ventilation background NVQ Level 2 or 3 in Ventilation, Plumbing or Building Services or equivalent Full UK driving licence Customer facing and respectful with the ability to represent the company professionally The right attitude, takes pride in work and values being part of a team The role Service, maintenance, fault finding and repairs on mechanical ventilation systems Planned and reactive works across social housing and commercial sites Commissioning, airflow testing and system performance checks Completing reports and documentation to a high standard Working Monday to Friday, 8am to 5pm with paid lunch and optional overtime Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Maleek Randley at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Job Title: Mechanical Plumber Location: Woking, UK Salary: Competitive + Benefits Job Type: Full-time permanent Start Date: ASAP upon successful completion of clearance documentation Company Description BJF Group is a leading multi-discipline Main Contractor based across the UK, specialising in delivering high quality construction projects across various sectors priding ourselves of our reputation for excellence and attention to detail. Within our Facilities Management division, the Southeast Core team plays a crucial role in the day-to-day delivery of reactive and preventative works across a diverse range of properties and systems within our client's sites - as a Mechanical Plumber within the team, you will be expected to provide comprehensive repairs and maintenance to a range of both commercial and domestic Plumbing & Heating applications. If you have ambitions of playing a key part in driving our business forwards, then we want you to join us at an exciting time of development and growth to realise your full potential. Position We are seeking a highly competent and experienced Commercial Plumber/Mechanical Engineer to manage, install, maintain, and repair complex plumbing, heating, ventilation, and drainage systems within commercial, industrial, and public sector buildings across the UK. This role requires a blend of hands-on plumbing expertise and technical mechanical engineering knowledge to ensure compliance with stringent UK standards and regulations. Key Responsibilities: Installation & Maintenance - Install, maintain, and repair commercial hot and cold water systems, drainage systems, pipework, and mechanical plant (including pumps, calorifiers, booster sets, and pressurisation sets/vessels) Heating & HVAC - Work on commercial heating systems, including boilers, radiators, and associated pipework, and provide support for HVAC (Heating, Ventilation, and Air Conditioning) mechanical components Technical Interpretation - Interpret and work accurately from detailed schematics, blueprints, and engineering drawings to execute installations and repairs to specification System Testing - Conduct commissioning, pressure testing, and fault diagnosis on new and existing plumbing and mechanical systems to ensure operational efficiency and integrity Regulatory Compliance - Ensure all work meets UK standards, including Building Regulations, Water Regulations (WRAS) Health & Safety - Demonstrates occupational competence and safety awareness Mechanical Jointing - Proficiency in pipe jointing techniques (copper soldering, press fitting, threading, Flanges) Fault Finding - Effectively diagnose and resolve complex mechanical and system faults using logical troubleshooting methods Working at Heights - Relevant certification/training (e.g., IPAF/PASMA) Qualifications & Requirements Required: NVQ Level 2/3 in Plumbing and Heating or equivalent trade qualification G3 Unvented Minimum of 3-5 years proven experience working as a commercial/industrial plumber or mechanical maintenance engineer in the UK Desirable: ONC/HNC in Mechanical Engineering, Building Services Engineering, or a related discipline BOAS experience or qualification HVAC Experience PASMA & IPAF Commercial Plant room installations Strong verbal and written communication skills for technical reporting and client interaction Full, clean UK Driving Licence
Jan 12, 2026
Full time
Job Title: Mechanical Plumber Location: Woking, UK Salary: Competitive + Benefits Job Type: Full-time permanent Start Date: ASAP upon successful completion of clearance documentation Company Description BJF Group is a leading multi-discipline Main Contractor based across the UK, specialising in delivering high quality construction projects across various sectors priding ourselves of our reputation for excellence and attention to detail. Within our Facilities Management division, the Southeast Core team plays a crucial role in the day-to-day delivery of reactive and preventative works across a diverse range of properties and systems within our client's sites - as a Mechanical Plumber within the team, you will be expected to provide comprehensive repairs and maintenance to a range of both commercial and domestic Plumbing & Heating applications. If you have ambitions of playing a key part in driving our business forwards, then we want you to join us at an exciting time of development and growth to realise your full potential. Position We are seeking a highly competent and experienced Commercial Plumber/Mechanical Engineer to manage, install, maintain, and repair complex plumbing, heating, ventilation, and drainage systems within commercial, industrial, and public sector buildings across the UK. This role requires a blend of hands-on plumbing expertise and technical mechanical engineering knowledge to ensure compliance with stringent UK standards and regulations. Key Responsibilities: Installation & Maintenance - Install, maintain, and repair commercial hot and cold water systems, drainage systems, pipework, and mechanical plant (including pumps, calorifiers, booster sets, and pressurisation sets/vessels) Heating & HVAC - Work on commercial heating systems, including boilers, radiators, and associated pipework, and provide support for HVAC (Heating, Ventilation, and Air Conditioning) mechanical components Technical Interpretation - Interpret and work accurately from detailed schematics, blueprints, and engineering drawings to execute installations and repairs to specification System Testing - Conduct commissioning, pressure testing, and fault diagnosis on new and existing plumbing and mechanical systems to ensure operational efficiency and integrity Regulatory Compliance - Ensure all work meets UK standards, including Building Regulations, Water Regulations (WRAS) Health & Safety - Demonstrates occupational competence and safety awareness Mechanical Jointing - Proficiency in pipe jointing techniques (copper soldering, press fitting, threading, Flanges) Fault Finding - Effectively diagnose and resolve complex mechanical and system faults using logical troubleshooting methods Working at Heights - Relevant certification/training (e.g., IPAF/PASMA) Qualifications & Requirements Required: NVQ Level 2/3 in Plumbing and Heating or equivalent trade qualification G3 Unvented Minimum of 3-5 years proven experience working as a commercial/industrial plumber or mechanical maintenance engineer in the UK Desirable: ONC/HNC in Mechanical Engineering, Building Services Engineering, or a related discipline BOAS experience or qualification HVAC Experience PASMA & IPAF Commercial Plant room installations Strong verbal and written communication skills for technical reporting and client interaction Full, clean UK Driving Licence
Industrial Refrigeration Engineer Birmingham 50,000 per annum An established European industrial refrigeration manufacturer, this company provides advanced, energy-efficient cooling solutions and service support across the UK. Focused on sustainability and the use of natural refrigerants like ammonia, they offer bespoke designs, installations, and maintenance of cooling systems that help reduce carbon emissions, cut operational costs, and enhance performance. Key Responsibilities: Responding to service calls and carrying out risk assessments Diagnosing and troubleshooting breakdowns on chiller and HVAC systems Commissioning and maintaining high-performance HVAC equipment Providing specialist support on centrifugal compressors, absorption chillers, and control systems Package: 50,000 per annum Overtime, door to door & on-call pay 33 days holiday Pension scheme Continuous training Opportunities What You'll Need: City & Guilds in Refrigeration & Air Conditioning F-Gas certification Experience with Ammonia refrigeration systems Experience working with industrial chillers and HVAC systems Full UK driving licence Interested in hearing more? Call Peter Caulfield on (phone number removed) or Email (url removed) WR HVAC M&E are recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy.
Jan 12, 2026
Full time
Industrial Refrigeration Engineer Birmingham 50,000 per annum An established European industrial refrigeration manufacturer, this company provides advanced, energy-efficient cooling solutions and service support across the UK. Focused on sustainability and the use of natural refrigerants like ammonia, they offer bespoke designs, installations, and maintenance of cooling systems that help reduce carbon emissions, cut operational costs, and enhance performance. Key Responsibilities: Responding to service calls and carrying out risk assessments Diagnosing and troubleshooting breakdowns on chiller and HVAC systems Commissioning and maintaining high-performance HVAC equipment Providing specialist support on centrifugal compressors, absorption chillers, and control systems Package: 50,000 per annum Overtime, door to door & on-call pay 33 days holiday Pension scheme Continuous training Opportunities What You'll Need: City & Guilds in Refrigeration & Air Conditioning F-Gas certification Experience with Ammonia refrigeration systems Experience working with industrial chillers and HVAC systems Full UK driving licence Interested in hearing more? Call Peter Caulfield on (phone number removed) or Email (url removed) WR HVAC M&E are recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy.
Overview The role of Security Engineer sits within Enterprise Services. The employee will be involved in the installation and commissioning of a range of security systems. The Security Engineer will have a strong understanding of a range of security products and the underpinning theory as to how they operate. This would include CCTV, Access Control, Intercom and how they may connect into other systems. A good understanding of IP networking and how it relates to IP based security systems is also required. As part of this role the engineer must also be a capable structured cabling installer as they may be involved in installing the network infrastructure the security system sits on or aid in the installation of structured cabling systems in other areas of the business as the need arises. Sudlows prides itself on quality of our installations and how we engage with the customer, as a customer facing operative the engineer will be expected to provide a high level of customer service in keeping with Sudlows standards as well as proving clear and concise communication both internally and externally. The highest levels of workmanship are expected as standard as well as strict adherence to our health and safety standards. All engineers are expected to be able to follow company processes relating to work generated documentation and our internal paperwork and systems. Key Tasks and Responsibilities Installation and commissioning of Access Control and Intercom Systems. Maintenance and fault calls on and Access Control and Intercom Systems. Installation and commissioning of CCTV Systems. Maintenance and fault calls of CCTV Systems. Installation and testing of Structured Cabling Systems. Interpreting and understanding proposal documents, schematics and drawings. Accurate and timely completion of all work-related documentation including but not limited to test results, commissioning information, drawings and O&M information. Ensure the highest quality of workmanship at all times. Ensure accurate, clear and concise documentation at all times. Self-auditing own work. Interfacing with other systems and sub-contractors, in particular but not limited to Building Intelligence and Fire and Intruder alarm services and other life safety systems. Accurate and timely completion of all internal documentation as required in your employment contract. Maintain adherence to Sudlows health and safety standards at all times. This list is not exhaustive and you may be asked to assist in other areas of the business as the need arises. Minimum Requirements Demonstrable knowledge of Access Control and Intercom Installation. Demonstrable knowledge of commissioning Access Control and Intercom systems. Demonstrable knowledge of CCTV Installation. Demonstrable knowledge of commissioning CCTV systems. Demonstrable knowledge of Structured Cabling Systems. Previously verifiable experience working in the electronic securities sector. Understanding of the interfacing requirements between Access Control systems and CCTV, Building Intelligence and a buildings life safety systems. Knowledge of both open protocol and closed protocol systems Good working knowledge of IP networking and it related to IP based security systems. Good knowledge of basic electrical principles such as measuring voltage and current drain. Good attention to detail and accuracy while completing documentation. Good IT competence. Working knowledge of current and prevalent Access Control and CCTV standards. Flexible approach to working location and times. UK Driving Licence. CSCS / ECS Card. Enhanced Requirements Industry recognised training and certification in Access Control systems. Industry recognised training or proven experience in the design of Access Control systems. Industry recognised training and certification in CCTV systems. Industry recognised training or proven experience in the design of CCTV systems. A high technical understanding and proven experience in IP networking, including switching, routing and wireless. Proven experience and / or industry recognised training with other technologies in the Intelligent building space such as CCTV, Intelligent Lighting, HVAC and Energy Management. Experience working to NACOSS NSI Gold Standards
Jan 12, 2026
Full time
Overview The role of Security Engineer sits within Enterprise Services. The employee will be involved in the installation and commissioning of a range of security systems. The Security Engineer will have a strong understanding of a range of security products and the underpinning theory as to how they operate. This would include CCTV, Access Control, Intercom and how they may connect into other systems. A good understanding of IP networking and how it relates to IP based security systems is also required. As part of this role the engineer must also be a capable structured cabling installer as they may be involved in installing the network infrastructure the security system sits on or aid in the installation of structured cabling systems in other areas of the business as the need arises. Sudlows prides itself on quality of our installations and how we engage with the customer, as a customer facing operative the engineer will be expected to provide a high level of customer service in keeping with Sudlows standards as well as proving clear and concise communication both internally and externally. The highest levels of workmanship are expected as standard as well as strict adherence to our health and safety standards. All engineers are expected to be able to follow company processes relating to work generated documentation and our internal paperwork and systems. Key Tasks and Responsibilities Installation and commissioning of Access Control and Intercom Systems. Maintenance and fault calls on and Access Control and Intercom Systems. Installation and commissioning of CCTV Systems. Maintenance and fault calls of CCTV Systems. Installation and testing of Structured Cabling Systems. Interpreting and understanding proposal documents, schematics and drawings. Accurate and timely completion of all work-related documentation including but not limited to test results, commissioning information, drawings and O&M information. Ensure the highest quality of workmanship at all times. Ensure accurate, clear and concise documentation at all times. Self-auditing own work. Interfacing with other systems and sub-contractors, in particular but not limited to Building Intelligence and Fire and Intruder alarm services and other life safety systems. Accurate and timely completion of all internal documentation as required in your employment contract. Maintain adherence to Sudlows health and safety standards at all times. This list is not exhaustive and you may be asked to assist in other areas of the business as the need arises. Minimum Requirements Demonstrable knowledge of Access Control and Intercom Installation. Demonstrable knowledge of commissioning Access Control and Intercom systems. Demonstrable knowledge of CCTV Installation. Demonstrable knowledge of commissioning CCTV systems. Demonstrable knowledge of Structured Cabling Systems. Previously verifiable experience working in the electronic securities sector. Understanding of the interfacing requirements between Access Control systems and CCTV, Building Intelligence and a buildings life safety systems. Knowledge of both open protocol and closed protocol systems Good working knowledge of IP networking and it related to IP based security systems. Good knowledge of basic electrical principles such as measuring voltage and current drain. Good attention to detail and accuracy while completing documentation. Good IT competence. Working knowledge of current and prevalent Access Control and CCTV standards. Flexible approach to working location and times. UK Driving Licence. CSCS / ECS Card. Enhanced Requirements Industry recognised training and certification in Access Control systems. Industry recognised training or proven experience in the design of Access Control systems. Industry recognised training and certification in CCTV systems. Industry recognised training or proven experience in the design of CCTV systems. A high technical understanding and proven experience in IP networking, including switching, routing and wireless. Proven experience and / or industry recognised training with other technologies in the Intelligent building space such as CCTV, Intelligent Lighting, HVAC and Energy Management. Experience working to NACOSS NSI Gold Standards
BMS Lead London (Projects across Germany, UK & wider Europe) 80,000 - 90,000 + Package + Travel + Bonus + Accommodation + Holidays + Long-Term Progression + Pension + Immediate Start An excellent opportunity for a senior BMS / Controls professional to step into a lead role with a rapidly growing, market-leading contractor delivering mission-critical projects across Europe. This role is suited to someone who has operated at the interface between main contractor, client, MEP teams, and BMS vendors, and is comfortable owning the BMS strategy, delivery, and commissioning across complex, high-value projects. You'll be joining a business with a strong pipeline of data centre, pharmaceutical, industrial, and high-tech builds across Germany, the UK, and the EU. The position offers long-term security, exposure to flagship projects, and clear progression into regional / EMEA leadership. This is a site-led, delivery-focused role - not a desk-based controls position. The successful candidate must be willing to travel and stay away as projects require. The Role will include: Taking full ownership of the BMS / Controls / EPMS package from design through construction, commissioning, and handover Acting as the technical authority for BMS across one or multiple projects Managing and coordinating BMS subcontractors, system integrators, and vendors Reviewing BMS and M&E design information to ensure buildability, compliance, and programme alignment Leading technical discussions with consultants, client teams, and internal delivery teams Managing RFIs, design queries, change control, and technical risk Ensuring full integration of BMS with M&E systems (HVAC, electrical, life safety, EPMS, etc.) Overseeing QA/QC, inspections, snagging, and documentation As a BMS Lead, You will Have: Strong BMS / Controls background with proven site delivery experience Experience working on data centres, pharma, industrial, or other mission-critical projects Background from a main contractor, MEP contractor, BMS vendor, or specialist integrator Comfortable managing multiple stakeholders and holding authority on technical matters Willingness to be site-based and travel / stay away as projects require Strong communication, coordination, and leadership skills EU right to work preferred Also Considered Senior BMS Project Managers / Automation Leads looking to step into a broader EMEA role Vendor-side Principal / Lead BMS Engineers seeking a move client- or contractor-side High-end BMS Package Managers with leadership stretch
Jan 10, 2026
Full time
BMS Lead London (Projects across Germany, UK & wider Europe) 80,000 - 90,000 + Package + Travel + Bonus + Accommodation + Holidays + Long-Term Progression + Pension + Immediate Start An excellent opportunity for a senior BMS / Controls professional to step into a lead role with a rapidly growing, market-leading contractor delivering mission-critical projects across Europe. This role is suited to someone who has operated at the interface between main contractor, client, MEP teams, and BMS vendors, and is comfortable owning the BMS strategy, delivery, and commissioning across complex, high-value projects. You'll be joining a business with a strong pipeline of data centre, pharmaceutical, industrial, and high-tech builds across Germany, the UK, and the EU. The position offers long-term security, exposure to flagship projects, and clear progression into regional / EMEA leadership. This is a site-led, delivery-focused role - not a desk-based controls position. The successful candidate must be willing to travel and stay away as projects require. The Role will include: Taking full ownership of the BMS / Controls / EPMS package from design through construction, commissioning, and handover Acting as the technical authority for BMS across one or multiple projects Managing and coordinating BMS subcontractors, system integrators, and vendors Reviewing BMS and M&E design information to ensure buildability, compliance, and programme alignment Leading technical discussions with consultants, client teams, and internal delivery teams Managing RFIs, design queries, change control, and technical risk Ensuring full integration of BMS with M&E systems (HVAC, electrical, life safety, EPMS, etc.) Overseeing QA/QC, inspections, snagging, and documentation As a BMS Lead, You will Have: Strong BMS / Controls background with proven site delivery experience Experience working on data centres, pharma, industrial, or other mission-critical projects Background from a main contractor, MEP contractor, BMS vendor, or specialist integrator Comfortable managing multiple stakeholders and holding authority on technical matters Willingness to be site-based and travel / stay away as projects require Strong communication, coordination, and leadership skills EU right to work preferred Also Considered Senior BMS Project Managers / Automation Leads looking to step into a broader EMEA role Vendor-side Principal / Lead BMS Engineers seeking a move client- or contractor-side High-end BMS Package Managers with leadership stretch
Our client, a reputable entity in the nuclear sector, is seeking an experienced Senior EC&I Engineer to join their team on a contract basis. This role requires live SC Clearance and the ability to obtain DV Clearance. Key Responsibilities: Production of EC&I design concepts, including Single Line Diagrams (SLD's), Block Cable Diagrams (BCD's), cable schedules, and layouts. Knowledge of control system hardware and software. Experience in Functional Safety (BSEN 61508 & 61511). Ensuring designs conform to relevant British and European standards and client requirements. Maintaining an LTQR / Technical File in accordance with quality management systems. Addressing operability, maintainability, and safety issues in designs. Producing designs within project programmes and budgets. Creating design justification reports that mitigate identified technical risks. Generating functional safety and controls design documentation including FDS, SIDD, and Functional Safety Plan. Providing detailed information (drawings, specifications, work instructions) for manufacturing. Checking in-house and subcontract drawing documentation. Producing EC&I technical specifications and commissioning documentation, e.g., FAT and SAT. Managing subcontract suppliers and attending/witnessing commissioning activities. Interpreting and creating EC&I engineering drawings using AutoCAD. Experience in EC&I design and safety interlock design preferred. Authoring engineering reports such as basis of design, substantiation report, and calculation reports. HVAC control systems experience is highly desirable. Technical Competency: Ensuring personal, professional, technical, and engineering competency through continuous professional development. Understanding technical aspects of projects to develop design and engineering solutions with internal specialists or external support. Consolidating and collating design and engineering documentation for internal approvals and client presentation. Qualifications: Relevant Engineering Degree, HNC, or demonstrable equivalent experience. IOSH Managing Safely or Level 2 Health & Safety in the Workplace, or equivalent. Experience & Knowledge: Broad-based engineering experience in design and manufacturing. Experience in the design of electrical systems. Knowledge of low voltage control gear and control systems. Skills & Abilities: Proficient user of MS Office. Ability to produce technical reports and documents. If you possess the necessary skills and experience in EC&I engineering within the nuclear sector and are seeking a new contract opportunity, we encourage you to apply now to join our client's dynamic team.
Jan 10, 2026
Full time
Our client, a reputable entity in the nuclear sector, is seeking an experienced Senior EC&I Engineer to join their team on a contract basis. This role requires live SC Clearance and the ability to obtain DV Clearance. Key Responsibilities: Production of EC&I design concepts, including Single Line Diagrams (SLD's), Block Cable Diagrams (BCD's), cable schedules, and layouts. Knowledge of control system hardware and software. Experience in Functional Safety (BSEN 61508 & 61511). Ensuring designs conform to relevant British and European standards and client requirements. Maintaining an LTQR / Technical File in accordance with quality management systems. Addressing operability, maintainability, and safety issues in designs. Producing designs within project programmes and budgets. Creating design justification reports that mitigate identified technical risks. Generating functional safety and controls design documentation including FDS, SIDD, and Functional Safety Plan. Providing detailed information (drawings, specifications, work instructions) for manufacturing. Checking in-house and subcontract drawing documentation. Producing EC&I technical specifications and commissioning documentation, e.g., FAT and SAT. Managing subcontract suppliers and attending/witnessing commissioning activities. Interpreting and creating EC&I engineering drawings using AutoCAD. Experience in EC&I design and safety interlock design preferred. Authoring engineering reports such as basis of design, substantiation report, and calculation reports. HVAC control systems experience is highly desirable. Technical Competency: Ensuring personal, professional, technical, and engineering competency through continuous professional development. Understanding technical aspects of projects to develop design and engineering solutions with internal specialists or external support. Consolidating and collating design and engineering documentation for internal approvals and client presentation. Qualifications: Relevant Engineering Degree, HNC, or demonstrable equivalent experience. IOSH Managing Safely or Level 2 Health & Safety in the Workplace, or equivalent. Experience & Knowledge: Broad-based engineering experience in design and manufacturing. Experience in the design of electrical systems. Knowledge of low voltage control gear and control systems. Skills & Abilities: Proficient user of MS Office. Ability to produce technical reports and documents. If you possess the necessary skills and experience in EC&I engineering within the nuclear sector and are seeking a new contract opportunity, we encourage you to apply now to join our client's dynamic team.
A leading recruitment firm is seeking an experienced BEMS Commissioning Engineer to join a well-established team in Nottingham, UK. In this role, you will handle the installation and implementation of Tridium and/or Trend Controllers. Ideal candidates should have solid experience in Control Panels, HVAC Systems, and BEMS software and be prepared to travel as needed. The position offers a competitive salary and an attractive benefits package including a bonus scheme, health insurance, and 25 days holiday.
Jan 10, 2026
Full time
A leading recruitment firm is seeking an experienced BEMS Commissioning Engineer to join a well-established team in Nottingham, UK. In this role, you will handle the installation and implementation of Tridium and/or Trend Controllers. Ideal candidates should have solid experience in Control Panels, HVAC Systems, and BEMS software and be prepared to travel as needed. The position offers a competitive salary and an attractive benefits package including a bonus scheme, health insurance, and 25 days holiday.
A leading Smart Building Specialist is seeking a BMS Commissioning Engineer to join their team in Manchester. In this role, you'll commission BEMS systems while focusing on HVAC and electrical controls, ensuring energy efficiency across various projects. The company offers a competitive salary up to £60K, a company car, private healthcare, and multiple employee benefits, fostering a supportive culture with high staff retention. Join a trusted firm dedicated to innovative solutions in the smart buildings sector.
Jan 10, 2026
Full time
A leading Smart Building Specialist is seeking a BMS Commissioning Engineer to join their team in Manchester. In this role, you'll commission BEMS systems while focusing on HVAC and electrical controls, ensuring energy efficiency across various projects. The company offers a competitive salary up to £60K, a company car, private healthcare, and multiple employee benefits, fostering a supportive culture with high staff retention. Join a trusted firm dedicated to innovative solutions in the smart buildings sector.
HVAC Building Automation Systems Specialist Here at Siemens, we take pride in enabling sustainable progress through technology. We do this through empowering customers by combining the real and digital worlds. Improving how we live, work, and move today and for the next generation! We know that the only way a business thrives is if our people are thriving. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you? Our Smart Buildings help to create efficient, safe, adaptable, and responsible environments. Our aim isn't just about improving buildings; it's about creating perfect places that improve people's lives. Transform the everyday with us! Our HVAC Systems Specialists participate in the installation, startup, and commissioning of building automation system equipment that has been newly installed and supports the verification of the system database and programming, ensuring consistency with the scope of work and sequence of operations. Our Systems Specialists are the face of Siemens, and your expertise and regular interaction with the customer will help them save energy and money, as well as create a more sustainable future for our environment. As a HVAC Systems Specialist, you will: Commission new distributed digital control systems on construction sites within planned timelines Document commissioning details; communicate deficiencies and progress Act as the Lead Technician and plan work with Team Leader Network technologies: Perform data backup from data servers and create automated backup procedures. Troubleshoot and resolve inconsistencies in the functions or sequence of operations. Configure PC workstations and user interfaces. Confirm proper network performance Operational testing, verification, and acceptance: Run routine reports to review system operation. Perform final inspection, testing and customer acceptance. Provide customer training on system operations. Complete and submit routine written reports. Provide plans and control system documents to engineering for as built drawings Project site communication and coordination: Coordinate trade contractors to perform startup services Work Overtime as needed (Compressed schedule performance can be a factor and will require extended hours to meet commitments) Work Rotational On Call and/or Minimal Overnight Travel Submit accurate time and expense reports Adhere to local, corporate, and OSHA safety policies and procedures You will make an impact with these qualifications: Basic Qualifications: 1+ years of experience with Electro mechanical systems and user PC/software (either in a previous role or through education) Demonstrated on the job experience with: Integration of low voltage building sub systems industry protocols, such as BACnet, N2, Modbus, etc. Reading, understanding, and interpreting design and construction documents Ability and willingness to work in a variety of circumstances, including climbing ladders, scaffolds, and high lift equipment, working in ducts, crawl spaces, roofs, basements, above ceilings, and in various conditions Must be able to use hand tools, laptop, email, smartphone, and tablet as well as be able to carry and move equipment and tools weighing up to 50 pounds unassisted Experience with Microsoft Office (Word, Excel, and Outlook) Must be able to work overtime and on call as needed Must be 18 years of age and possess a valid driver's license with limited violations Legally authorized to work in the United States on a continual and permanent basis without company sponsorship Preferred Qualifications: High school diploma or state recognized GED; Associate or Bachelor's degree in electronics, mechanical engineering, or related Ready to create your own journey? Join u s today . About Siemens: We are a global technology company focused on industry, infrastructure, transport, and healthcare. From more resource efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare, we create technology with purpose adding real value for customers. Our Commitment to Equity and Inclusion in our Diverse Global Workforce We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us. You'll Benefit From Siemens offers a variety of health and wellness benefits to our employees. Details regarding our benefits can be found here: The pay range for this position is $49,195 - $84,335 annually. The actual wage offered may be lower or higher depending on budget and candidate experience, knowledge, skills, qualifications, and premium geographic location. Equal Employment Opportunity Statement Siemens is an Equal Opportunity Employer encouraging inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. EEO is the Law Applicants and employees are protected from discrimination on the basis of race, color, religion, sex, national origin, or any characteristic protected by Federal or other applicable law. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre employment testing, or otherwise participating in the employee selection process, please fill out the accommodations form by clicking on this link: Accommodation for disability form. If you're unable to complete the form, you can reach out to our AskHR team for support at 1-. Please note our AskHR representatives do not have visibility of application or interview status. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Pay Transparency Siemens follows Pay Transparency laws. Criminal History Qualified applications with arrest or conviction records will be considered for employment in accordance with applicable local and state laws.
Jan 10, 2026
Full time
HVAC Building Automation Systems Specialist Here at Siemens, we take pride in enabling sustainable progress through technology. We do this through empowering customers by combining the real and digital worlds. Improving how we live, work, and move today and for the next generation! We know that the only way a business thrives is if our people are thriving. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you? Our Smart Buildings help to create efficient, safe, adaptable, and responsible environments. Our aim isn't just about improving buildings; it's about creating perfect places that improve people's lives. Transform the everyday with us! Our HVAC Systems Specialists participate in the installation, startup, and commissioning of building automation system equipment that has been newly installed and supports the verification of the system database and programming, ensuring consistency with the scope of work and sequence of operations. Our Systems Specialists are the face of Siemens, and your expertise and regular interaction with the customer will help them save energy and money, as well as create a more sustainable future for our environment. As a HVAC Systems Specialist, you will: Commission new distributed digital control systems on construction sites within planned timelines Document commissioning details; communicate deficiencies and progress Act as the Lead Technician and plan work with Team Leader Network technologies: Perform data backup from data servers and create automated backup procedures. Troubleshoot and resolve inconsistencies in the functions or sequence of operations. Configure PC workstations and user interfaces. Confirm proper network performance Operational testing, verification, and acceptance: Run routine reports to review system operation. Perform final inspection, testing and customer acceptance. Provide customer training on system operations. Complete and submit routine written reports. Provide plans and control system documents to engineering for as built drawings Project site communication and coordination: Coordinate trade contractors to perform startup services Work Overtime as needed (Compressed schedule performance can be a factor and will require extended hours to meet commitments) Work Rotational On Call and/or Minimal Overnight Travel Submit accurate time and expense reports Adhere to local, corporate, and OSHA safety policies and procedures You will make an impact with these qualifications: Basic Qualifications: 1+ years of experience with Electro mechanical systems and user PC/software (either in a previous role or through education) Demonstrated on the job experience with: Integration of low voltage building sub systems industry protocols, such as BACnet, N2, Modbus, etc. Reading, understanding, and interpreting design and construction documents Ability and willingness to work in a variety of circumstances, including climbing ladders, scaffolds, and high lift equipment, working in ducts, crawl spaces, roofs, basements, above ceilings, and in various conditions Must be able to use hand tools, laptop, email, smartphone, and tablet as well as be able to carry and move equipment and tools weighing up to 50 pounds unassisted Experience with Microsoft Office (Word, Excel, and Outlook) Must be able to work overtime and on call as needed Must be 18 years of age and possess a valid driver's license with limited violations Legally authorized to work in the United States on a continual and permanent basis without company sponsorship Preferred Qualifications: High school diploma or state recognized GED; Associate or Bachelor's degree in electronics, mechanical engineering, or related Ready to create your own journey? Join u s today . About Siemens: We are a global technology company focused on industry, infrastructure, transport, and healthcare. From more resource efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare, we create technology with purpose adding real value for customers. Our Commitment to Equity and Inclusion in our Diverse Global Workforce We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us. You'll Benefit From Siemens offers a variety of health and wellness benefits to our employees. Details regarding our benefits can be found here: The pay range for this position is $49,195 - $84,335 annually. The actual wage offered may be lower or higher depending on budget and candidate experience, knowledge, skills, qualifications, and premium geographic location. Equal Employment Opportunity Statement Siemens is an Equal Opportunity Employer encouraging inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. EEO is the Law Applicants and employees are protected from discrimination on the basis of race, color, religion, sex, national origin, or any characteristic protected by Federal or other applicable law. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre employment testing, or otherwise participating in the employee selection process, please fill out the accommodations form by clicking on this link: Accommodation for disability form. If you're unable to complete the form, you can reach out to our AskHR team for support at 1-. Please note our AskHR representatives do not have visibility of application or interview status. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Pay Transparency Siemens follows Pay Transparency laws. Criminal History Qualified applications with arrest or conviction records will be considered for employment in accordance with applicable local and state laws.
A Controls technician / Automation technician / Systems technician is required to join an industry leader in Florida. The successful Controls technician / Automation technician / Systems technician is responsible for installing, commissioning, troubleshooting, and maintaining building automation systems, applying practical expertise in HVAC controls and systems integration. Package $60,000 - $85,000 base salary Car allowance 401(k), Health, dental, life and vision insurance PTO Responsibilities Perform start-up, commissioning, and re-commissioning of DDC and building automation systems. Install, test, and calibrate control devices, sensors, and actuators used in HVAC and mechanical systems. Program, configure, and adjust control parameters, setpoints, trend logs, alarms, and graphics. Use laptops and diagnostic tools to troubleshoot and resolve field issues related to system communication, wiring, or programming. Maintain accurate documentation, including redline drawings, schematics, and system records. Coordinate with project engineers and field teams to deliver efficient, code-compliant installations. Integrate and verify control systems with third-party equipment and networks (e.g., BACnet, Modbus, LonWorks). Provide training and technical support to end users and facility staff on system operation and maintenance. Ensure compliance with safety protocols and complete all required pre-task planning and risk assessments. Manage daily assignments to ensure work is completed on schedule and within budget. Requirements Minimum of 3 years' hands-on experience with DDC systems installation, programming, commissioning, and troubleshooting. Strong understanding of HVAC system operation, control logic, and electrical schematics. Proficient in using computers, control software, and programming tools for system setup and diagnostics. Ability to read and interpret mechanical, electrical, and control drawings. Familiarity with building automation communication protocols (BACnet, Modbus, LonWorks) preferred. Physically capable of performing fieldwork including lifting up to 50 lbs, climbing ladders, and working in mechanical spaces. Must hold a valid driver's license and be able to travel locally to client sites. Candidates located in or near the West Palm Beach area is essential.
Jan 09, 2026
Full time
A Controls technician / Automation technician / Systems technician is required to join an industry leader in Florida. The successful Controls technician / Automation technician / Systems technician is responsible for installing, commissioning, troubleshooting, and maintaining building automation systems, applying practical expertise in HVAC controls and systems integration. Package $60,000 - $85,000 base salary Car allowance 401(k), Health, dental, life and vision insurance PTO Responsibilities Perform start-up, commissioning, and re-commissioning of DDC and building automation systems. Install, test, and calibrate control devices, sensors, and actuators used in HVAC and mechanical systems. Program, configure, and adjust control parameters, setpoints, trend logs, alarms, and graphics. Use laptops and diagnostic tools to troubleshoot and resolve field issues related to system communication, wiring, or programming. Maintain accurate documentation, including redline drawings, schematics, and system records. Coordinate with project engineers and field teams to deliver efficient, code-compliant installations. Integrate and verify control systems with third-party equipment and networks (e.g., BACnet, Modbus, LonWorks). Provide training and technical support to end users and facility staff on system operation and maintenance. Ensure compliance with safety protocols and complete all required pre-task planning and risk assessments. Manage daily assignments to ensure work is completed on schedule and within budget. Requirements Minimum of 3 years' hands-on experience with DDC systems installation, programming, commissioning, and troubleshooting. Strong understanding of HVAC system operation, control logic, and electrical schematics. Proficient in using computers, control software, and programming tools for system setup and diagnostics. Ability to read and interpret mechanical, electrical, and control drawings. Familiarity with building automation communication protocols (BACnet, Modbus, LonWorks) preferred. Physically capable of performing fieldwork including lifting up to 50 lbs, climbing ladders, and working in mechanical spaces. Must hold a valid driver's license and be able to travel locally to client sites. Candidates located in or near the West Palm Beach area is essential.
Mechanical Project Manager - Established Engineering Contractor - Newry Your new company An innovative mechanical engineering company, with offices in Newry and Dublin, is seeking to recruit a Project Manager based in Newry. This family-run business has been a leader in the engineering industry for over 20 years and has recently made a multi-million-pound investment in new premises at their head office in Newry. The company is focused on further growth opportunities and is expanding its team to handle an increased workload, making it an exciting time to join and contribute to its success. Your new role The Project Manager will oversee and manage mechanical engineering projects from inception to completion. Typical projects include shop fitouts, restaurants, offices, labs, ranging in value from £5k up to £1 million. Responsibilities include: Ensuring profitability and reputation enhancement. Leading and communicating with the Install Team. Preparing and managing project plans. Conducting site surveys and obtaining client approvals. Ensuring health and safety compliance. Regularly communicating with clients. Managing budgets and procurement. Handling valuations and payments. Arranging commissioning and preparing O&M manuals. What you'll need to succeed Previous Mechanical Project Management or Site Management experience. In-depth knowledge of HVAC systems. Experience in mechanical systems installation and maintenance. NVQ Level III Plumbing & Heating qualification or equivalent. Proficiency in procurement and budgeting. Excellent organisational and leadership abilities. Effective communication and interpersonal skills. Knowledge of building regulations and compliance. Full UK/Irish Driving Licence. What you'll get in return This position offers the chance to work with a dynamic and innovative company that values growth and excellence. You'll have the opportunity to lead exciting projects, collaborate with a skilled team, and make a significant impact in the industry. The company's commitment to professional development and a positive work environment ensures that you will have the support and resources needed to thrive in your career. In return, you will receive a highly competitive salary, a company vehicle for site visits (predominantly located in Dublin with occasional travel to GB), a company bonus scheme, perks card, flexible working, and a cycle-to-work scheme, among other benefits. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
Jan 09, 2026
Full time
Mechanical Project Manager - Established Engineering Contractor - Newry Your new company An innovative mechanical engineering company, with offices in Newry and Dublin, is seeking to recruit a Project Manager based in Newry. This family-run business has been a leader in the engineering industry for over 20 years and has recently made a multi-million-pound investment in new premises at their head office in Newry. The company is focused on further growth opportunities and is expanding its team to handle an increased workload, making it an exciting time to join and contribute to its success. Your new role The Project Manager will oversee and manage mechanical engineering projects from inception to completion. Typical projects include shop fitouts, restaurants, offices, labs, ranging in value from £5k up to £1 million. Responsibilities include: Ensuring profitability and reputation enhancement. Leading and communicating with the Install Team. Preparing and managing project plans. Conducting site surveys and obtaining client approvals. Ensuring health and safety compliance. Regularly communicating with clients. Managing budgets and procurement. Handling valuations and payments. Arranging commissioning and preparing O&M manuals. What you'll need to succeed Previous Mechanical Project Management or Site Management experience. In-depth knowledge of HVAC systems. Experience in mechanical systems installation and maintenance. NVQ Level III Plumbing & Heating qualification or equivalent. Proficiency in procurement and budgeting. Excellent organisational and leadership abilities. Effective communication and interpersonal skills. Knowledge of building regulations and compliance. Full UK/Irish Driving Licence. What you'll get in return This position offers the chance to work with a dynamic and innovative company that values growth and excellence. You'll have the opportunity to lead exciting projects, collaborate with a skilled team, and make a significant impact in the industry. The company's commitment to professional development and a positive work environment ensures that you will have the support and resources needed to thrive in your career. In return, you will receive a highly competitive salary, a company vehicle for site visits (predominantly located in Dublin with occasional travel to GB), a company bonus scheme, perks card, flexible working, and a cycle-to-work scheme, among other benefits. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
1st Step Solutions Ltd (Mechanical & Electrical Recruitment Specialists) Required: Mechanical Pre-Construction Engineer/Manager Employment: Permanent Location: Bristol Salary: up to £55k (car negotiable) Holidays: 25 days & Bank Holidays Duties Operate with a team-first mentality, where collaboration and accountability are part of day-to-day operations, and where the pre-construction function is truly valued. Overseeing all front-end pre-construction activity for mechanical packages (up to £1.5m in value) Managing the design, estimating, and bid submission process for new projects Coordinating with in-house teams, clients, and external consultants Reviewing tender documentation and identifying technical and commercial risks Supporting client presentations, interviews, and technical clarifications Handing over to delivery teams with clear scopes, budgets, and programmes Ensuring alignment with company capabilities and operational standards Skills & Experience Required Solid experience in a pre-construction or design & estimating within the Building Services/Mechanical sector Strong understanding of HVAC building services systems, design coordination, and delivery processes Ability to lead bids and manage multi-disciplinary input under tight deadlines Excellent communication skills, both technical and client-facing Commercially astute with strong planning and documentation habits Relevant qualifications in Mechanical/Building Services Engineering Company/Employer A fast growing local commercial Mechanical & Plumbing contractor, capable of budgeting, design, project management, installation and commissioning across the following disciplines and typically working within a 45mile radius of Bristol. Air Conditioning Heating Ventilation Plumbing BMS Renewable Energy How do I apply? Respond to this advert/email or call Ralph Preston in our Bristol office on Who are 1st Step Solutions Ltd? Established in 2004, we are a market leader in M&E/Building Services recruitment within the UK construction industry. With over two decades of expertise, we specialise in the supply of both freelance and permanent professionals across all levels of the Built Environment - from Electricians and Plumbers to Supervisors, Project Managers, Quantity Surveyors, and Contracts Managers. Whether you're looking for your next role or seeking skilled labour & staff to support your project, we deliver tailored recruitment solutions to meet your needs. Compliant Integrity Service Professional Expertise
Jan 08, 2026
Full time
1st Step Solutions Ltd (Mechanical & Electrical Recruitment Specialists) Required: Mechanical Pre-Construction Engineer/Manager Employment: Permanent Location: Bristol Salary: up to £55k (car negotiable) Holidays: 25 days & Bank Holidays Duties Operate with a team-first mentality, where collaboration and accountability are part of day-to-day operations, and where the pre-construction function is truly valued. Overseeing all front-end pre-construction activity for mechanical packages (up to £1.5m in value) Managing the design, estimating, and bid submission process for new projects Coordinating with in-house teams, clients, and external consultants Reviewing tender documentation and identifying technical and commercial risks Supporting client presentations, interviews, and technical clarifications Handing over to delivery teams with clear scopes, budgets, and programmes Ensuring alignment with company capabilities and operational standards Skills & Experience Required Solid experience in a pre-construction or design & estimating within the Building Services/Mechanical sector Strong understanding of HVAC building services systems, design coordination, and delivery processes Ability to lead bids and manage multi-disciplinary input under tight deadlines Excellent communication skills, both technical and client-facing Commercially astute with strong planning and documentation habits Relevant qualifications in Mechanical/Building Services Engineering Company/Employer A fast growing local commercial Mechanical & Plumbing contractor, capable of budgeting, design, project management, installation and commissioning across the following disciplines and typically working within a 45mile radius of Bristol. Air Conditioning Heating Ventilation Plumbing BMS Renewable Energy How do I apply? Respond to this advert/email or call Ralph Preston in our Bristol office on Who are 1st Step Solutions Ltd? Established in 2004, we are a market leader in M&E/Building Services recruitment within the UK construction industry. With over two decades of expertise, we specialise in the supply of both freelance and permanent professionals across all levels of the Built Environment - from Electricians and Plumbers to Supervisors, Project Managers, Quantity Surveyors, and Contracts Managers. Whether you're looking for your next role or seeking skilled labour & staff to support your project, we deliver tailored recruitment solutions to meet your needs. Compliant Integrity Service Professional Expertise
An excellent opportunity for an experienced HVAC Project Manager to join a well-established company. Job Type: Full-Time, Permanent. Salary: £55,000 - £60,000 Per Annum, Depending on Experience. Car, Laptop, iPad and Phone provided. Location: Leicester, Leicestershire. About The Company: They are a mechanical service contracting business with roots in Leicestershire since 1982, they have established a reputation for excellence in the HVAC industry. They have extensive experience in the design and installation of air conditioning and ventilation systems, particularly in the healthcare and medical imaging sectors. Their expansion into Havant, Hampshire, and their continuous investment in professional staff, training, and technology reflect their commitment to meeting the increasingly complex and varied needs of their clients. They are now looking to recruit an experienced HVAC Project Manager to join their busy team. Responsibilities: You will be responsible for leading and managing HVAC and mechanical engineering projects from inception to completion. You will oversee the planning, execution and delivery of projects within defined timelines, budgets and quality standards Main Duties: Attend project handover with the relevant estimator. Collaborating with the design team, either internally or externally, to coordinate design work and incorporate information gathered from site visits and surveys. Managing projects from inception to completion, including on-site presence and involvement during the commissioning stage. Procuring all necessary materials and services. Coordinating labour requirements, which will involve liaising with our own workforce at the ACVR office and/or organising subcontract labour. Ensuring cost control throughout the project and managing valuations and cash flow. Being available for weekend or our-of-hours work if needed, as well as overseeing crane and lifting operation. Providing essential information for Operations and Maintenance (O &M) Manuals maintaining records of design and as fitted changes for purposes of the 'As Fitted Drawings' Identify opportunities for process improvements, efficiency enhancements and standardisation of project management practices. Share lessons learned and best practices across the organisation. Providing leadership and guidance to project teams, including mechanical engineers, technicians and contractors. Providing technical expertise and guidance to junior team members. Skills & Competencies: Strong leadership and communication skills Minimum of 5 years' experience in similar position within the HVAC industry. Comprehensive experience in planning, executing and closing projects successfully. Knowledge of procurement processes and contract management. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Jan 08, 2026
Full time
An excellent opportunity for an experienced HVAC Project Manager to join a well-established company. Job Type: Full-Time, Permanent. Salary: £55,000 - £60,000 Per Annum, Depending on Experience. Car, Laptop, iPad and Phone provided. Location: Leicester, Leicestershire. About The Company: They are a mechanical service contracting business with roots in Leicestershire since 1982, they have established a reputation for excellence in the HVAC industry. They have extensive experience in the design and installation of air conditioning and ventilation systems, particularly in the healthcare and medical imaging sectors. Their expansion into Havant, Hampshire, and their continuous investment in professional staff, training, and technology reflect their commitment to meeting the increasingly complex and varied needs of their clients. They are now looking to recruit an experienced HVAC Project Manager to join their busy team. Responsibilities: You will be responsible for leading and managing HVAC and mechanical engineering projects from inception to completion. You will oversee the planning, execution and delivery of projects within defined timelines, budgets and quality standards Main Duties: Attend project handover with the relevant estimator. Collaborating with the design team, either internally or externally, to coordinate design work and incorporate information gathered from site visits and surveys. Managing projects from inception to completion, including on-site presence and involvement during the commissioning stage. Procuring all necessary materials and services. Coordinating labour requirements, which will involve liaising with our own workforce at the ACVR office and/or organising subcontract labour. Ensuring cost control throughout the project and managing valuations and cash flow. Being available for weekend or our-of-hours work if needed, as well as overseeing crane and lifting operation. Providing essential information for Operations and Maintenance (O &M) Manuals maintaining records of design and as fitted changes for purposes of the 'As Fitted Drawings' Identify opportunities for process improvements, efficiency enhancements and standardisation of project management practices. Share lessons learned and best practices across the organisation. Providing leadership and guidance to project teams, including mechanical engineers, technicians and contractors. Providing technical expertise and guidance to junior team members. Skills & Competencies: Strong leadership and communication skills Minimum of 5 years' experience in similar position within the HVAC industry. Comprehensive experience in planning, executing and closing projects successfully. Knowledge of procurement processes and contract management. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Our client is a British privately owned multi-disciplinary consultancy with a network of regional offices across the UK, providing local support to public and private sector customers. For over 50 years the business has been advising developers, architects, contractors, local authorities and end users, delivering creative engineering designs that maximise the potential of buildings. With a passion for energy efficient low carbon building design, the team promotes cost effective solutions that work both for today and future generations. Due to a busy order book the securing of a Senior Mechanical Building Services Design Engineer is viewed a key hire, further strengthening a talented team. The position could be attached to either Leeds, Manchester or Liverpool offices, working collaboratively as a wider northern MEP Team to deliver a wide range of schemes of mixed complexity. To work effectively as a Senior Mechanical Engineer the appointed candidate must establish themselves as a key leader in the team through technical excellence, leadership and mentoring skills to develop and guide Junior Engineers. Additionally, Senior Engineers must lead projects to ensure resources are allocated effectively and projects are delivered on time. Additional duties include reporting current project progress, matters of interest or concern and any updates to the senior leadership team at regular intervals over the project lifecycle. As a Senior Engineer you would be expected to be aware and conversant with the latest editions of the technical standards, which apply to MEP design in various sectors, and be capable of communicating the requirements to clients and collaborators during meetings or written communications. Essential Duties and Responsibilities Deliver quality designs - complete HVAC & PH package. Manage your resource pool to ensure successful outcomes. Use communication skills to write good reports. Support and manage junior Engineers and Technicians. Offer leadership, mentoring and motivation to junior engineers. Carry out Professional Development and maintaining records in accordance with CIBSE/IMechE requirements. Carry out thorough site investigations, complete inspections, identify issues and solve problems. Develop technical specifications for projects delivered. Develop technical equipment schedules for projects delivered. Support our clients with tender appraisals. Review Mechanical Design constraints. Confidently communicate and collaborate with team members, clients, and other construction professionals about projects. Represent the company at design team meetings with clients and other construction professionals. Display commercial acumen in your role, identifying change or opportunities on projects, or through discussion with clients, and follow up either directly or via the senior leadership team. Understand the principles of BREEAM and LEED sustainability accreditation schemes. Where applicable, support the commissioning process on projects delivered to ensure systems are set up to reflect the design intent. Software Capabilities Revit, AutoCAD and BIM Environment Navisworks StabiCAD IES Virtual Environment (Basic knowledge allowing reports to be reviewed) Education Requirements Degree Qualified in a relevant field (desirable) Current or on-going Chartership status with CIBSE, iMechE or another recognised association within Mechanical Engineering Applications are invited from client facing technically competent Mechanical Building Services Design Engineers looking for a long term career within a dynamic multi-disc environment.
Jan 08, 2026
Full time
Our client is a British privately owned multi-disciplinary consultancy with a network of regional offices across the UK, providing local support to public and private sector customers. For over 50 years the business has been advising developers, architects, contractors, local authorities and end users, delivering creative engineering designs that maximise the potential of buildings. With a passion for energy efficient low carbon building design, the team promotes cost effective solutions that work both for today and future generations. Due to a busy order book the securing of a Senior Mechanical Building Services Design Engineer is viewed a key hire, further strengthening a talented team. The position could be attached to either Leeds, Manchester or Liverpool offices, working collaboratively as a wider northern MEP Team to deliver a wide range of schemes of mixed complexity. To work effectively as a Senior Mechanical Engineer the appointed candidate must establish themselves as a key leader in the team through technical excellence, leadership and mentoring skills to develop and guide Junior Engineers. Additionally, Senior Engineers must lead projects to ensure resources are allocated effectively and projects are delivered on time. Additional duties include reporting current project progress, matters of interest or concern and any updates to the senior leadership team at regular intervals over the project lifecycle. As a Senior Engineer you would be expected to be aware and conversant with the latest editions of the technical standards, which apply to MEP design in various sectors, and be capable of communicating the requirements to clients and collaborators during meetings or written communications. Essential Duties and Responsibilities Deliver quality designs - complete HVAC & PH package. Manage your resource pool to ensure successful outcomes. Use communication skills to write good reports. Support and manage junior Engineers and Technicians. Offer leadership, mentoring and motivation to junior engineers. Carry out Professional Development and maintaining records in accordance with CIBSE/IMechE requirements. Carry out thorough site investigations, complete inspections, identify issues and solve problems. Develop technical specifications for projects delivered. Develop technical equipment schedules for projects delivered. Support our clients with tender appraisals. Review Mechanical Design constraints. Confidently communicate and collaborate with team members, clients, and other construction professionals about projects. Represent the company at design team meetings with clients and other construction professionals. Display commercial acumen in your role, identifying change or opportunities on projects, or through discussion with clients, and follow up either directly or via the senior leadership team. Understand the principles of BREEAM and LEED sustainability accreditation schemes. Where applicable, support the commissioning process on projects delivered to ensure systems are set up to reflect the design intent. Software Capabilities Revit, AutoCAD and BIM Environment Navisworks StabiCAD IES Virtual Environment (Basic knowledge allowing reports to be reviewed) Education Requirements Degree Qualified in a relevant field (desirable) Current or on-going Chartership status with CIBSE, iMechE or another recognised association within Mechanical Engineering Applications are invited from client facing technically competent Mechanical Building Services Design Engineers looking for a long term career within a dynamic multi-disc environment.
An excellent opportunity for an experienced Senior Mechanical Estimator to join a well-established company! Job Type: Full-Time, Permanent - Office Based. Salary: £60,000 - £70,000 Per Annum, Depending on Experience. Location: Maidstone, Kent ME15. About The Company: Established in 1983, they are a respected mechanical services contractor delivering high-quality HVAC solutions across London and the South East. They work across the commercial, high-end residential, education, and public sectors, offering mechanical design, installation, and commissioning services. Following a recent change of ownership, the business is entering a significant phase of modernisation, investment, and process improvement. As part of this transformation, they are seeking an experienced Mechanical Estimator to take ownership of their estimating function and help shape the future of how they price and win work. About The Role: This is a key senior hire. You will be responsible for all mechanical estimating activities across the business and will play a pivotal role in developing a formal estimating department. You will work closely with their Managing Director and Projects Team to: Lead all mechanical estimating for tenders ranging from small works to multi-million-pound packages Carry out detailed take-offs, cost analysis, and tender submissions using drawings, specifications, and site information Review and improve our current pricing methods (largely Excel-based) and implement a consistent, structured estimating system Establish best-practice procedures, databases, templates, and cost libraries Liaise with supply chain and subcontractors across mechanical, electrical, and BMS packages Provide value-engineering options and technical input during bid stages Support business strategy by helping to forecast, analyse, and improve their win rates Work with project managers to ensure smooth handover of successful bids into delivery You will report directly to senior management and have the autonomy to build and shape an estimating function as the business continues to expand. Typical Project Values: Small works: £10k-£100k Medium projects: £100k-£1.5m Larger refurb/fit-out packages: £1.5m-£4m+ Sectors include: Hotels and hospitality Residential refurbishments and new build Commercial offices Schools and education projects Specialist upgrades (AC, ventilation, BMS, plant replacement, VRV/VRF, etc.) Although the role is primarily mechanical, experience with electrical and BMS integration is highly advantageous Candidate Requirements: Significant experience as a Mechanical Estimator within an M&E contracting environment Strong knowledge of mechanical building services (HVAC, pipework, ductwork, plant, BMS interface, etc.) Comfortable working independently as the primary estimator for the company A process-driven mindset with the ability to modernise and implement new systems Excellent commercial awareness and understanding of how to build competitive but profitable tenders Strong Excel skills and familiarity with digital estimating tools/databases (or ability to introduce them) Confident communicating with consultants, clients, suppliers, and internal teams High attention to detail and the ability to manage multiple tenders at varying stages Company Benefits: Opportunity to build and lead a modern estimating department from the ground up. Work with a company that has been trusted for over 43 years with excellent repeat-business clients. Be part of a leadership team that is investing heavily in modern systems, processes, and people. A stable, growing pipeline of work across multiple sectors. Long-term progression opportunities as the business continues to scale. Competitive salary, benefits, and an opportunity to shape the future of the company. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Jan 08, 2026
Full time
An excellent opportunity for an experienced Senior Mechanical Estimator to join a well-established company! Job Type: Full-Time, Permanent - Office Based. Salary: £60,000 - £70,000 Per Annum, Depending on Experience. Location: Maidstone, Kent ME15. About The Company: Established in 1983, they are a respected mechanical services contractor delivering high-quality HVAC solutions across London and the South East. They work across the commercial, high-end residential, education, and public sectors, offering mechanical design, installation, and commissioning services. Following a recent change of ownership, the business is entering a significant phase of modernisation, investment, and process improvement. As part of this transformation, they are seeking an experienced Mechanical Estimator to take ownership of their estimating function and help shape the future of how they price and win work. About The Role: This is a key senior hire. You will be responsible for all mechanical estimating activities across the business and will play a pivotal role in developing a formal estimating department. You will work closely with their Managing Director and Projects Team to: Lead all mechanical estimating for tenders ranging from small works to multi-million-pound packages Carry out detailed take-offs, cost analysis, and tender submissions using drawings, specifications, and site information Review and improve our current pricing methods (largely Excel-based) and implement a consistent, structured estimating system Establish best-practice procedures, databases, templates, and cost libraries Liaise with supply chain and subcontractors across mechanical, electrical, and BMS packages Provide value-engineering options and technical input during bid stages Support business strategy by helping to forecast, analyse, and improve their win rates Work with project managers to ensure smooth handover of successful bids into delivery You will report directly to senior management and have the autonomy to build and shape an estimating function as the business continues to expand. Typical Project Values: Small works: £10k-£100k Medium projects: £100k-£1.5m Larger refurb/fit-out packages: £1.5m-£4m+ Sectors include: Hotels and hospitality Residential refurbishments and new build Commercial offices Schools and education projects Specialist upgrades (AC, ventilation, BMS, plant replacement, VRV/VRF, etc.) Although the role is primarily mechanical, experience with electrical and BMS integration is highly advantageous Candidate Requirements: Significant experience as a Mechanical Estimator within an M&E contracting environment Strong knowledge of mechanical building services (HVAC, pipework, ductwork, plant, BMS interface, etc.) Comfortable working independently as the primary estimator for the company A process-driven mindset with the ability to modernise and implement new systems Excellent commercial awareness and understanding of how to build competitive but profitable tenders Strong Excel skills and familiarity with digital estimating tools/databases (or ability to introduce them) Confident communicating with consultants, clients, suppliers, and internal teams High attention to detail and the ability to manage multiple tenders at varying stages Company Benefits: Opportunity to build and lead a modern estimating department from the ground up. Work with a company that has been trusted for over 43 years with excellent repeat-business clients. Be part of a leadership team that is investing heavily in modern systems, processes, and people. A stable, growing pipeline of work across multiple sectors. Long-term progression opportunities as the business continues to scale. Competitive salary, benefits, and an opportunity to shape the future of the company. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Job Title: Commercial Plumber/Mechanical Engineer Location: Hampshire, UK Salary: Competitive + Benefits Job Type: Full-time permanent Start Date: ASAP upon successful completion of clearance documentation Company Description BJF Group is a leading multi-discipline Main Contractor based across the UK, specialising in delivering high quality construction projects across various sectors priding ourselves of our reputation for excellence and attention to detail. Within our Facilities Management division, the Southwest Core team plays a crucial role in the day-to-day delivery of reactive and preventative works across a diverse range of properties and systems within our client's sites - as a Commercial Plumber within the team, you will be expected to provide comprehensive repairs and maintenance to a range of both commercial and domestic Plumbing & Heating applications. If you have ambitions of playing a key part in driving our business forwards, then we want you to join us at an exciting time of development and growth to realise your full potential. Position We are seeking a highly competent and experienced Commercial Plumber/Mechanical Engineer to manage, install, maintain, and repair complex plumbing, heating, ventilation, and drainage systems within commercial, industrial, and public sector buildings across the UK. This role requires a blend of hands-on plumbing expertise and technical mechanical engineering knowledge to ensure compliance with stringent UK standards and regulations. Key Responsibilities Installation & Maintenance - Install, maintain, and repair commercial hot and cold water systems, drainage systems, pipework, and mechanical plant (including pumps, calorifiers, booster sets, and pressurisation sets/vessels) Heating & HVAC - Work on commercial heating systems, including boilers, radiators, and associated pipework, and provide support for HVAC (Heating, Ventilation, and Air Conditioning) mechanical components Technical Interpretation - Interpret and work accurately from detailed schematics, blueprints, and engineering drawings to execute installations and repairs to specification System Testing - Conduct commissioning, pressure testing, and fault diagnosis on new and existing plumbing and mechanical systems to ensure operational efficiency and integrity Regulatory Compliance - Ensure all work meets UK standards, including Building Regulations, Water Regulations (WRAS) Health & Safety - Demonstrates occupational competence and safety awareness Mechanical Jointing - Proficiency in pipe jointing techniques (copper soldering, press fitting, threading, Flanges) Fault Finding - Effectively diagnose and resolve complex mechanical and system faults using logical troubleshooting methods Working at Heights - Relevant certification/training (e.g., IPAF/PASMA) Qualifications and Requirements Required: NVQ Level 2/3 in Plumbing and Heating or equivalent trade qualification G3 Unvented Minimum of 3-5 years proven experience working as a commercial/industrial plumber or mechanical maintenance engineer in the UK Desirable: ONC/HNC in Mechanical Engineering, Building Services Engineering, or a related discipline BOAS experience or qualification Supervisory or management experience within a construction/M&E environment Excellent technical understanding of commercial fluid mechanics, thermodynamics, and energy efficiency Commercial Plant room installations Strong verbal and written communication skills for technical reporting and client interaction Full, clean UK Driving Licence
Jan 07, 2026
Full time
Job Title: Commercial Plumber/Mechanical Engineer Location: Hampshire, UK Salary: Competitive + Benefits Job Type: Full-time permanent Start Date: ASAP upon successful completion of clearance documentation Company Description BJF Group is a leading multi-discipline Main Contractor based across the UK, specialising in delivering high quality construction projects across various sectors priding ourselves of our reputation for excellence and attention to detail. Within our Facilities Management division, the Southwest Core team plays a crucial role in the day-to-day delivery of reactive and preventative works across a diverse range of properties and systems within our client's sites - as a Commercial Plumber within the team, you will be expected to provide comprehensive repairs and maintenance to a range of both commercial and domestic Plumbing & Heating applications. If you have ambitions of playing a key part in driving our business forwards, then we want you to join us at an exciting time of development and growth to realise your full potential. Position We are seeking a highly competent and experienced Commercial Plumber/Mechanical Engineer to manage, install, maintain, and repair complex plumbing, heating, ventilation, and drainage systems within commercial, industrial, and public sector buildings across the UK. This role requires a blend of hands-on plumbing expertise and technical mechanical engineering knowledge to ensure compliance with stringent UK standards and regulations. Key Responsibilities Installation & Maintenance - Install, maintain, and repair commercial hot and cold water systems, drainage systems, pipework, and mechanical plant (including pumps, calorifiers, booster sets, and pressurisation sets/vessels) Heating & HVAC - Work on commercial heating systems, including boilers, radiators, and associated pipework, and provide support for HVAC (Heating, Ventilation, and Air Conditioning) mechanical components Technical Interpretation - Interpret and work accurately from detailed schematics, blueprints, and engineering drawings to execute installations and repairs to specification System Testing - Conduct commissioning, pressure testing, and fault diagnosis on new and existing plumbing and mechanical systems to ensure operational efficiency and integrity Regulatory Compliance - Ensure all work meets UK standards, including Building Regulations, Water Regulations (WRAS) Health & Safety - Demonstrates occupational competence and safety awareness Mechanical Jointing - Proficiency in pipe jointing techniques (copper soldering, press fitting, threading, Flanges) Fault Finding - Effectively diagnose and resolve complex mechanical and system faults using logical troubleshooting methods Working at Heights - Relevant certification/training (e.g., IPAF/PASMA) Qualifications and Requirements Required: NVQ Level 2/3 in Plumbing and Heating or equivalent trade qualification G3 Unvented Minimum of 3-5 years proven experience working as a commercial/industrial plumber or mechanical maintenance engineer in the UK Desirable: ONC/HNC in Mechanical Engineering, Building Services Engineering, or a related discipline BOAS experience or qualification Supervisory or management experience within a construction/M&E environment Excellent technical understanding of commercial fluid mechanics, thermodynamics, and energy efficiency Commercial Plant room installations Strong verbal and written communication skills for technical reporting and client interaction Full, clean UK Driving Licence
Associate Design Director - Building Services A well-established M&E Design and Build contractor providing full turnkey mechanical and electrical installation and maintenance services is seeking a Mechanical Design or Building Services Engineer to head up the design team. With over 20 years of successful delivery across commercial, healthcare, motor retail, and high-security environments, the business continues to grow and now requires an experienced Design Engineer to join their team to take responsibility for the design function across the group You'll work with clients from initial consultation through to detailed design and handover, supporting both design and build and refurbishment projects. Key Responsibilities: Design and specify mechanical building services systems, including HVAC and plumbing. Produce detailed designs, drawings, and specifications using AutoCAD. Support the tender process with technical input, value engineering, and risk assessments. Collaborate with project managers, subcontractors, and supply partners to deliver integrated M&E solutions. Attend site surveys and client meetings; provide ongoing technical support through to commissioning and handover. Package: 66,000- 86,000 DOE 6,000 car allowance 33 days holiday (including bank holidays) Holiday buy-back scheme Healthcare scheme after probation 8% pension contribution Excellent career progression within a supportive and growing organisation What You'll Need: Degree in Mechanical Engineering or Building Services. Proven experience within the construction or M&E design sector. Strong technical understanding of HVAC systems. Excellent communication and stakeholder management skills. Proficient in Microsoft Office and design tools such as Hevacomp or similar. WR HVAC M&E are recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy.
Jan 07, 2026
Full time
Associate Design Director - Building Services A well-established M&E Design and Build contractor providing full turnkey mechanical and electrical installation and maintenance services is seeking a Mechanical Design or Building Services Engineer to head up the design team. With over 20 years of successful delivery across commercial, healthcare, motor retail, and high-security environments, the business continues to grow and now requires an experienced Design Engineer to join their team to take responsibility for the design function across the group You'll work with clients from initial consultation through to detailed design and handover, supporting both design and build and refurbishment projects. Key Responsibilities: Design and specify mechanical building services systems, including HVAC and plumbing. Produce detailed designs, drawings, and specifications using AutoCAD. Support the tender process with technical input, value engineering, and risk assessments. Collaborate with project managers, subcontractors, and supply partners to deliver integrated M&E solutions. Attend site surveys and client meetings; provide ongoing technical support through to commissioning and handover. Package: 66,000- 86,000 DOE 6,000 car allowance 33 days holiday (including bank holidays) Holiday buy-back scheme Healthcare scheme after probation 8% pension contribution Excellent career progression within a supportive and growing organisation What You'll Need: Degree in Mechanical Engineering or Building Services. Proven experience within the construction or M&E design sector. Strong technical understanding of HVAC systems. Excellent communication and stakeholder management skills. Proficient in Microsoft Office and design tools such as Hevacomp or similar. WR HVAC M&E are recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy.
Commercial Gas Engineer We are seeking a skilled and experienced Commercial Gas Engineer on behalf of a successful Facilities management business covering Birmingham. You will be working on a range of contracts, including healthcare, retail, and supermarkets delivering high-quality planned and reactive maintenance, installations, and servicing of gas and oil heating systems, ensuring compliance with all safety and operational standards. Location: Birmingham Salary: £40k - £45k Hours: Full-time Key Responsibilities Perform planned and reactive maintenance according to PPM schedules. Carry out domestic and commercial gas installations, commissioning, fault finding, and servicing. Support the team by acting as a second-man when required. Provide accurate timesheets and assist with quotations for additional works. Attend client premises promptly to meet SLAs and maintain strong client relationships. Complete technical reports and upscale major issues appropriately. Undertake basic facilities maintenance tasks as needed. Participate in a 24-hour call-out rota. Required Skills and Experience Experience in the FM industry Gas Safe qualified in CPA1, CCN1, CENWAT, CKR1, HTR1, CODNCO1, CIGA1, ICPN1, and COMCAT1-5. Oil Fired Heater (OFTEC) certification and LPG certification. Knowledge of Building Regulations and Building Environmental Services (HVAC). Desirable Qualifications CSCS card. IPAF & PASMA certifications. FGas Cat4 certification. Part P Electrical certificate. Apply Now! This is an excellent opportunity to work within a diverse and rewarding environment, delivering essential services to key facilities. We offer a competitive salary, opportunities for professional development, and a supportive team culture.
Jan 07, 2026
Full time
Commercial Gas Engineer We are seeking a skilled and experienced Commercial Gas Engineer on behalf of a successful Facilities management business covering Birmingham. You will be working on a range of contracts, including healthcare, retail, and supermarkets delivering high-quality planned and reactive maintenance, installations, and servicing of gas and oil heating systems, ensuring compliance with all safety and operational standards. Location: Birmingham Salary: £40k - £45k Hours: Full-time Key Responsibilities Perform planned and reactive maintenance according to PPM schedules. Carry out domestic and commercial gas installations, commissioning, fault finding, and servicing. Support the team by acting as a second-man when required. Provide accurate timesheets and assist with quotations for additional works. Attend client premises promptly to meet SLAs and maintain strong client relationships. Complete technical reports and upscale major issues appropriately. Undertake basic facilities maintenance tasks as needed. Participate in a 24-hour call-out rota. Required Skills and Experience Experience in the FM industry Gas Safe qualified in CPA1, CCN1, CENWAT, CKR1, HTR1, CODNCO1, CIGA1, ICPN1, and COMCAT1-5. Oil Fired Heater (OFTEC) certification and LPG certification. Knowledge of Building Regulations and Building Environmental Services (HVAC). Desirable Qualifications CSCS card. IPAF & PASMA certifications. FGas Cat4 certification. Part P Electrical certificate. Apply Now! This is an excellent opportunity to work within a diverse and rewarding environment, delivering essential services to key facilities. We offer a competitive salary, opportunities for professional development, and a supportive team culture.
