172 jobs found

Bristol Want to work for growing team with the motivation to excel and a good team spirit? Where you will have the opportunity to apply your experience and passion for navigation sensor technologies to support the development of some of the most advanced missile systems in the world? If so, keep reading! Salary: Up to £57,000, depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: Navigation sensors are a critical technology for missile systems and therefore the team has frequent exposure to high-profile, fast-paced projects with rewarding opportunities. The team is very closely linked with the navigation sensors team in MBDA France with associated travel opportunities. You will carry out specification and assessment of navigation sensors including GNSS receivers, anti-jam units and inertial measurement units. You will monitor supplier and technology roadmaps to identify cutting edge technology for investment, support sub assembly and equipment assessment trials, and undertake research activities as part of an international team. This role offers you the opportunity to be part of a successful team working to develop new and innovative solutions to address complex customer requirements, develop expertise in navigation sensors, take on a key role in several multi-national research programmes, as well as the chance to challenge yourself technically. What we're looking for from you: An experienced defence or aerospace engineer, with a degree in electronic engineering, physics, or similar Technical knowledge in navigation systems, avionics, or RF engineering Project management, delivery, and commercial awareness highly desirable Modelling skills including proficiency with tools such as MATLAB and/or Simulink would be advantageous The ability to gain an understanding of the following: A detailed understanding of all aspects of GNSS functionality, multi-constellation technology and system integration Detailed knowledge of receivers, anti-jam and CRPA's GNSS system chain performance & integration challenges GNSS jamming and spoofing experience Inertial sensor specification and characterisation Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Disability, Neurodiversity and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

The Senior Algorithm Engineer role in GCN (Guidance, Control, and Navigation) is a highly visible, strategic position, working with a highly capable technical team. This role presents a rare opportunity for hands-on technical involvement, research and strategy steering, without line management duties. Salary: Up to £65,000, depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: As a Senior Algorithm Specialist you will develop your expertise both at a detailed Guidance & Control design level, and up through the higher architectural levels, where you can demonstrate a capability for rigorous system analysis and management of complexity. You will influence the current and future direction for design and testing of sophisticated missile Guidance & Control (G&C) systems, spanning specialist algorithms, real-time architecture, and complex equipment including RF & IR seekers, inertial sensors, actuators, propulsion (turbojets, ramjets and thrust-vectored rockets), and interfaces to surface and air launch platforms. You will have the opportunity to collaborate widely across departmental, directorate and national boundaries, and to be involved across multiple programmes at various points in their respective lifecycles, from the early research and concept stages through to full-scale development and guided flight trials. What we're looking for from you: Theoretical knowledge and extensive experience of aerospace guidance, control and navigation specification, analysis, algorithm design & implementation, real time architecture and verification Ability to bound the scope of an engineering problem and to express the design challenge in terms of clear unambiguous design requirements/objectives Managing complexity by identifying major drivers in a large, inter-connected engineering system Able to cross-verify complex systems and system models against underlying theory Communicating complex or conceptually difficult ideas clearly Diagnosing abnormalities in an engineering system both physically and virtually through computer modelling and simulation(Matlab & Simulink) Influencing technically when there are other factors driving teams A particular interest in applications with control experience, preferably applied flight control, bit this is not essential Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

Stevenage A great opportunity for an EMC Test Engineer to deploy their skills in a state of the art facility surrounded by a wealth of experience! Salary: Up to £55,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to hands on testing (working from home available when not testing). Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year). Pension: maximum total (employer and employee) contribution of up to 14%. Overtime: opportunity for paid overtime. Flexi Leave: Up to 15 additional days. Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The Opportunity The Electromagnetic Compatibility (EMC) department is like no other within MBDA. It is split between a test team working hands on in our state-of-the-art EMC Facility to simulate environments and also a highly skilled project consultancy team that is embedded across all projects within MBDA to ensure good EMC practice & design. This role is in our EMC Test Team, who support MBDA programmes through their product development cycle from Risk Reduction test activities to full Qualification Testing. The majority of the work will be performing various EMC test activities in line with a Test Plan produced by the EMC Project Team as well as the production of the Test Report. The EMC Test Team perform formal tests in the products intended electromagnetic environment at the EMC Laboratories in Bristol. What are we looking for: Essential Previous experience in EMC Testing to Defence Standards. Previous experience using Compliance 5 and EMC 32 Software Higher education or significant experience within subject fields: Electronics, Electrical, Physics, EMC or similar. An understanding of EMC and design principles. Excellent communication skills at all levels, both verbally and in writing. Ability to work to defined deadlines and within budget limits. Excellent Analytical and Problem Solving skills. Professional manner and adaptability when the companies needs are evolving. Capable of working autonomously to meet the delivery needs of the company Desirable Knowledge in the application of a military EMC standard to system, sub-system or equipment level is desirable (e.g. Defence Standard 59-, AECTP500, Mil-Std-461, RTCA DO160 / EUROCAE ED-14). Engineer's with previous experience in delivering support around the subject of electromagnetic compatibility. What's in it for you? Build on your EMC knowledge working alongside the subject matter experts and specialists within the field of EMC. Our team is highly valued in MBDA. We are known as capable, knowledgeable, and we have great test facilities. Opportunities to represent MBDA during discussions with our customers. As EMC specialists, we are able to influence the project teams and how EMC qualification will occur. Potential to participate in research or investigation studies. Ability to bring your ideas and unique skillset to the team. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

Cure Talent is delighted to be supporting an innovative UK based life sciences and medical technology company developing next generation diagnostic technology. As the business continues to scale its automated diagnostic platform, they are now looking to appoint a Mechanical Engineer to support the development of active mechanical systems within a state of the art laboratory environment in Bristol. This is a hands on role within a growing organisation, offering broad exposure across mechanical design, prototyping and system level integration. You will play a key role in developing and refining mechanical systems for a complex automated biochemical processing platform, while maintaining the agility required in a fast paced, regulated environment. Key responsibilities: Develop mechanical actuation and control methods to support an automated biochemical processing platform, contributing to the transition from research prototypes to integrated systems and devices Design and develop mechanical components and assemblies including enclosures, internal frames, cartridge interfaces and precision mechanisms, applying design for manufacture and assembly principles Support hands on prototyping activities including build, modification and iterative refinement of mechanical designs Collaborate closely with engineering and scientific colleagues to ensure robust system level integration Support the development and maintenance of mechanical design documentation in line with design control requirements, participating in design reviews, risk management activities, and verification and validation testing Provide technical guidance and support to junior engineering staff on mechanical design and manufacture We re looking for a Mechanical Engineer with: An MEng or equivalent Master s degree in Mechanical Engineering A minimum of three years industry experience in mechanical design for complex electromechanical systems Strong hands on experience with prototyping and manufacturing processes such as 3D printing, machining and sheet metal fabrication Proficiency with Fusion360 or SolidWorks, with the ability to produce detailed engineering drawings Strong problem solving and systems thinking skills, with the ability to independently plan and deliver complex mechanical engineering work If you re a hands on mechanical engineer looking for a role with genuine ownership and impact in a growing MedTech business, we d love to hear from you.

PLEASE MENTION GREENJOBS WHEN RESPONDING TO THIS CAREER OPPORTUNITY Westminster City Council Principal Whole Life Carbon Officer Reference: WCC623174 Salary range: £56,436 - £59,574 pro-rata, per annum (actual salary £50,166 - £52,955 per annum). Salary negotiable depending upon experience Work location: Westminster City Hall, 64 Victoria Street, Westminster, SW1E 6QP Hours per week: 32 Contract type: Temporary up to 18 months Closing date: 20 February 2026 About Us: THE EXTRAORDINARY STORY OF SERENA S VISION Regeneration, Economy and Planning in Westminster City Council is a world of extraordinary stories. Where innovative and open-minded people bring everything to the cause. Even expertise from surprising places. Take Serena. She is an absolute force of nature at the heart of our Church Street regeneration. And she puts the residents first in everything. Serena s vision is clear. Regeneration isn t just about bricks and concrete. It s about communities. It s about the environment. It s about the lives of people and how they feel about where they call home. Serena is their advocate, making sure residents voices aren t just heard, but drive the changes we re making. The future is safe in her hands. The Role: As Principal Whole Life Carbon Officer you can make your own powerful contribution to Westminster s success. You ll join the Town Planning team and support our commitment to achieving Net Zero by reducing Scope 3 emissions associated with construction projects. With the support of the Innovate UK fund and in collaboration with Preoptima, we re currently rolling out our Planning Application Carbon Evaluation and Reduction (PACER) digital platform this will transform the review of whole life carbon assessments in planning, creating a robust, standardised and transparent process which will upskill officers and collate valuable data for informing policy. It ll be your responsibility to oversee the use and integration of this platform, ensuring consistency and accuracy of the review process, liaising with applicants and consultants to ensure its efficient use, and gathering feedback from our stakeholders with the aim of identifying challenges and improving the end-user experience. Supporting Policy Officers as they implement policy and guidance to achieve our Net Zero and Circular Economy aims will be another vital task, and we ll also expect you to provide advice on whole life carbon requirements, and draft guidance and updates to environmental supplementary planning documents. But your work won t stop here you ll also assist the Principle Sustainability Officer in reviewing major applications and applications involving substantial demolition, support the review of carbon options appraisals submitted in pre-redevelopment audits, and critically analyse Whole Life Carbon Assessments submitted for planning applications. In addition, you ll have a number of important budget responsibilities these include applying and allocating funds to different functions and projects. About You: To be a success in this vital role you ll have well developed technical knowledge of whole life carbon assessments, datasets and carbon conversion factors, and plenty of experience relating to the development and use of digital tools to undertake this sort of work. And as a collaborative, partnership-focused worker, you ll have promoted awareness of climate change, net zero or environmental sustainability, and supported the uptake of net zero goals. Some knowledge of planning processes would be desirable, as would experience of retrofitting existing buildings, carbon options appraisals, stakeholder engagement and undertaking research to record the impact of interventions. Capable of learning from experience, sharing your expertise with colleagues and upskilling the council, your superb communication abilities will see you interacting with a diverse range of stakeholders and presenting complex information clearly. This will include writing project plans, progress reports and policy recommendations, interpreting information from different sources and drawing sound conclusions. A critical and analytical thinker with good problem solving skills, you should also be able to plan your time effectively and deliver to tight deadlines. When it comes to qualifications we ll look for a degree in a relevant field for example in architecture, structural engineering, building services or environmental engineering, and a post-graduate qualification or chartership in a related area would be desirable. Highly motivated, your strong commitment to environmental sustainability and the net zero transition will mean you stay up to date with the latest research and best practices in the fields of whole life carbon, the circular economy and sustainability. In addition, you should also have good knowledge of the latest innovations being employed or developed in the construction industry to reduce carbon emissions. Westminster City Council is committed to supporting Care Leavers into the workplace. Care Leavers seeking their first job and who wish to be considered under our scheme, will automatically be invited to interview should they meet the essential criteria for the role. The Council is committed to achieving diverse shortlists to support our desire to increase the number of staff from underrepresented groups in our workforce. We especially encourage applications from a Global Majority (GM), people who are Black, Asian, Brown, dual-heritage, indigenous to the global south, and or have been racialised as 'ethnic minorities' (formally known as B.A.M.E , Black, Asian and multiple ethnic) background and, while the role is open to all applicants, we will utilise the positive action provisions of the Equality Act 2010 to appoint a candidate from a global majority background where there is a choice between two candidates of equal merit. If you are from a Global Majority background you can self-declare this to the hiring manager as part of our positive action commitments. We reserve the right to extend or close this vacancy early without warning subject to the volume of suitable applicants. What We Offer: Westminster is an amazing place. We are home to more than 200,000 residents from all backgrounds, over 50,000 vibrant and vital businesses and three-quarters-of-a-million people work in Westminster. Westminster City Council s strategy is to work towards a Fairer Westminster. A Fairer Westminster is one in which our communities are at the heart of our decision-making and help to determine the city s future. By working directly with our communities and other partners, we can build a more inclusive city that celebrates our diverse communities, and where residents, workers and visitors from all backgrounds will feel welcome and safe. At Westminster City Council, we pride ourselves on being an inclusive workplace and employer of choice. We encourage and welcome applications from people from all backgrounds and aim to have a workforce that, at all levels, represents the communities we serve. We champion equality, diversity, inclusion and wellbeing and aim to create a workplace where everyone feels valued, has a sense of belonging and is empowered to be their best, that is the Westminster Way. To find out more about how we do this visit As a forward thinking Council we appreciate that people work in different ways, therefore our staff benefit from working a range of flexible working patterns as well as Agile working. The Council is a Disability Confident Employer. If you have declared a disability in your application , we guarantee an interview if you meet the essential criteria of the job. If you are invited for interview, you will be asked if you need any reasonable adjustments in order to attend, and we will make these wherever possible. Interview date: Weeks commencing 23 February 2026 and 2 March 2026 TO APPLY PLEASE CLICK THE "APPLY NOW" BUTTON AND YOU WILL BE REDIRECTED TO BEGIN THE APPLICATION PROCES

Python Quant Dev - Cash Equities/Algo/Backtesting/Trading/Market Making Responsibilities Research and analyse trading outcomes to assess effectiveness of execution strategies Build and refine quantitative models to improve algorithmic trading performance Implement elements of trading logic in Python and work closely with engineering teams Partner with clients to explain model behaviour, review performance and gather feedback Support clients in an execution consulting capacity to optimise use of trading products Key Skills & Experience Strong quantitative mindset with passion for data and research Strong Python development skills (Java exposure beneficial but not core) Experience with electronic trading strategies and market microstructure Knowledge of European equities markets Exposure to distributed systems and large-scale data analysis desirable Excellent communication skills; able to work with global teams and clients High-frequency trading experience advantageous Permanent role - Central London based - hybrid working By applying to this job you are sending us your CV, which may contain personal information. Please refer to our Privacy Notice to understand how we process this information. In short, in order to supply you with work finding services, we will hold and process your personal data, and only with your express permission we will share this personal data with a client (or a third party working on behalf of the client) by email or by upload to the Client/third parties vendor management system. By giving us permission to send your CV to a client, this constitutes permission to share the personal data that would be necessary to consider your application, interview you (Phone/video/face to face) and if successful hire you. Scope AT acts as an employment agency for Permanent Recruitment and an employment business for the supply of temporary workers. By applying for this job you accept the Terms and Conditions, Data Protection Policy, Privacy Notice and Disclaimers which can be found at our website.

Storrington, West Sussex (RH20 3EA) Want to work for a world leading engineering company specialising in the manufacture of high-precision electromagnetic devices for the science and healthcare sectors? At Tesla Engineering Ltd, you can be proud of the part you are playing in addressing important issues such as the diagnosis and treatment of serious illnesses, and research into the fundamental nature of matter and the origins of the universe. Our growing company is enthusiastically looking to recruit highly-motivated, ambitious and committed individuals to join our friendly and supportive machine shop. Purpose: To safely and sustainably machine high quantity production work and low volume project work by achieving a specified level of output in terms of time, quality and cost standards in the build/test of Tesla's products. Duties include the following: To set and operate CNC Machines including programme editing when required under the guidance of the Production Engineer. Ensuring all equipment & tooling is functioning to achieve the required results for the operations undertaken. Ensuring that all work produced meets the specified level of quality. Maintaining a high standard of housekeeping and safe working practices in the section having due regard to the Company's Health & Safety policy. Ensure that accurate and timely booking procedures are maintained with SEIKI AIR and that all the relevant production documentation/records are processed correctly. Inform the Department Cell Leader of any relevant problems which could affect the achievement of the required output, with recommendations as to their solution. Carry out any other reasonable task that is required by the Company. Must haves: Knowledge in one or all languages, FANUC, HEIDENDAIN and MAZATROL. Experience of 3, 4 or 5 Axis Machining operations. An understanding of setups and work holding techniques. Note: There will be times when you may be required to undertake additional tasks, duties and responsibilities within your capabilities. The Company reserves the right to vary your tasks, duties and responsibilities at any time and from time to time according to the needs of the Company's business. However, you will not be assigned to duties or required to perform services which you cannot reasonably perform. There will also be times when you may be asked to transfer, either temporarily or permanently, to an alternative job within the Company. Where this is agreed with you, either on a temporary or a permanent basis, it will be confirmed to you in writing. Shift Pattern: Night Shift - Monday-Thursday 5:30 p.m. - 4:00 a.m. 40 hours per week A career with us means Working alongside supportive and highly experienced colleagues to achieve your potential 6.6 working weeks holiday per leave year (January to December) Career development and training opportunities Group Pension Plan (3% company contribution immediately, then 6.5% after 12 months) Access to Life Assurance (with pension), Osteopath and Mental Health/Well-being services Free onsite parking and electric vehicle charging points Electric vehicle purchase scheme through salary sacrifice after qualifying period Free tea and coffee Free yearly flu vaccination scheme Cycle-to-work scheme, discounted gym membership and a 5-A-Side Football Team Discounted Gym Membership Job Type: Full-time Expected hours: 40 per week Benefits: Company pension Cycle to work scheme Free flu jabs Health & wellbeing programme On-site parking Referral programme Sick pay Schedule: Night shift Ability to commute/relocate: Pulborough RH20 3EA: reliably commute or plan to relocate before starting work (required) Application question(s): 1. Do you require sponsorship now or in the future? - please answer yes or no 2. When does your current Right to Work in the UK expire? Experience: CNC: 4 years (required) Work authorisation: United Kingdom (required) Work Location: In person Reference ID: CNCN25

Innovation Software Engineer (Numerical Modelling, AI/ML, C++/Python) Guildford, Surrey (On-site) £65000 - £100,000 + 25% Bonus, 10% Pension, Private Medical. - A Masters or PhD Degree in Computing or STEM disciplines. - Can work full-time, 5 days a week in Guildford in the office. Your new company This leading Software provider are looking to bolster their engineering team with an experienced C++/Python Software Or Research Engineer. You will be working Full time in their head office location in the heart of Guildford close to the University and with excellent transport links to majority of Surrey and the South East. This role would essentially suit a versatile individual to span early R&D, applied algorithm development, and production grade engineering. You may sit more on the scientific research or SW Engineering side currently, but will be interested in a role blending the skills to solve real world problems. Your new role You'll be joining the Innovation Team which have a broad mandate to work across the entire suite of internal products. You'll drive early stage technical innovation by researching and prototyping new modelling, optimisation, AI, and simulation methods, then turning those ideas into robust, high quality software. The role involves designing algorithms and numerical techniques for complex scientific or engineering challenges, working across languages such as Python for research and C++ or C# for production, and collaborating closely with researchers and engineers to develop promising concepts into practical tools. They also want someone who can define good technical practices, ensure strong code quality through testing and documentation, and take full ownership of technical workstreams from initial concept through to integration. Overall, we need someone who thrives in an exploratory, ambiguous environment and can turn innovative ideas into practical, high impact tools that shape future products. It's a well-established business with decades of experience taking them a market leading position. Building on an impressive 2024 they pushed towards 100 headcount and have the investment and product positioning to double this in the coming 12 months, with a particular focus on the Engineering team. Given this imminent growth there are Senior and Leadership opportunities to aspire to down the line. What you'll need to succeed We're looking for candidates with a Masters or PhD Degree in a STEM or Computing discipline. You must have proven experience working at the interface of research and software development, translating prototype code into performant, production-ready implementations. We're looking for experience working in an R&D style environment using one or more compiled systems languages (C++, C#) or at least one high-level scientific language (eg, Python, Julia). We are particularly looking at experience with scientific computing, numerical methods, or computational modelling. Desirables are Machine learning, optimization, control, probabilistic modelling, or related fields. Familiarity digital twins, agentic systems, reinforcement learning or advanced optimisation. What you'll get in return You'll work for a technology focused company building innovative products. There's an excellent rewards scheme in place including an annual bonus up to 25%, 10% pension match, private healthcare, 25 days holiday and long term sick cover. There is parking on site or a shuttle bus for train commuters to Guildford and a modern office space with excellent amenities. What you need to do now To find out more and to be considered for this position please apply directly, or contact Max Wilcock, Senior Business Director. At Hays Technology, we are shaping the future of recruitment. The rapid adoption of cloud, which is making customer interfaces more engaging and creating a seamless engagement with businesses, means that from the foundation of your organisation up, software developers are critical to success. As the competition for talent grows, we're ready and waiting to help developers really make an impact on organisations, so talk to us today. We are Hays Technology. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.

Mechanical Engineer Harrogate, £28-32k Excellent opportunity for a Mechanical Graduate who has experience in a research capacity within a work based masters or PHD environment. You will be responsible for the design, development, and testing of mechanical systems or components focusing on innovation and the practical application of mechanical principles to solve complex problems, while managing res click apply for full job details

Penetration Tester - SC CLEARED - Wokingham, Berkshire and remote - 5 months+ (Tester, Test, Testing, Test Analyst, Test Engineer, Test Specialist, Security, AWS, Azure, Cloud, Crest, CyberScheme) One of our Blue Chip Clients is urgently looking for an SC Cleared Penetration Tester. Please find some details below: CONTRACTOR MUST HOLD ACTIVE SC CLEARANCE MUST BE PAYE THROUGH UMBRELLA Role Description: A penetration tester plays a vital role within the UK's cybersecurity industry, particularly when assisting organisations with managing and mitigating security risks. The core responsibilities of a penetration tester are to identify vulnerabilities that are present in an organisation's IT infrastructure, applications, and networks through rigorous testing. Employing both manual and automated techniques to simulate real world attacks, this will assess a company's security posture against any potential threats. Testers should also be responsible for maintaining an up-to-date knowledge of the ever-evolving threat landscape, adhering to ethical guidelines especially when handling sensitive data. In addition to strong technical skills, a penetration tester also needs to be able to demonstrate strong communication skills so complex findings can be described to non-technical stakeholders. Key Responsibilities Work as a professional, deliverable Technical Consultant (Penetration Tester CTM), offering clients a totally professional customer service experience, whilst adhering to its core values and company policies and procedures Conduct the full range of effective and comprehensive technical assessments and consultancy services to the highest standards Maintain an accurate and up to date knowledge of information security issues, keeping abreast of new technologies, methodologies, techniques, vulnerabilities and market trends and communicate this throughout the team Produce concise and accurate technical reports and executive summaries, in line with client and company expectations in accordance with the QA manual and within defined deadlines Participate in more specialist areas of technical assessments and consultancy services where required Participate in delivery of security management consultancy including IT Health Checks (ITHC), risk assessments and compliance and standards based audits, where required Engage with and fully participate in research & service development projects Ensure professional, coherent and relevant communication within our clients at an appropriate level, using relevant language and at all times, behave in a manner that reflects the values of the client. Maintain confidentiality at all times Ensure that work is carried out in accordance with defined policies and procedures Complete all tasks in a manner that displays a commercial awareness; ie managing client expectations and ensuring that project tasks are completed on time and on budget Complete administrative duties, which include weekly timesheet and expense submissions Through the course of your duties, identify opportunities for further business development and growth and ensure that this is communicated to your line manager, the PMO and Sales department Where necessary assist the commercial team in the preparation of test scopes and proposals Carry out any other additional, reasonable and alternative tasks that may be required from time to time Required skills, experience and personal attributes: Proven experience (2-3 years) in an IT security role to CTM level is essential and have, or be able to attain SC clearance (UK Single National) Excellent written and verbal communication skills. Great organisation skills and ability to work in a pressurised environment whilst working towards and achieving deadlines. Use of MS Office software such as Word, Excel, Powerpoint The ability to travel customer locations. Strong knowledge of penetration testing tools including (Burpsuite, Metasploit, Nmap) etc Good knowledge of multiple Operating Systems (OS) including Windows &.NIX Ability to configure network devices, Firewalls, IDS/IPS devices and wireless technologies Document findings in detailed reports, providing clear recommendations for remediation using in-house developed reporting tool. Good understanding of common security standards and regulatory compliance such as GDPR, ISO27001 and PCI DSS An ability to work effectively and positively within a team and willing to collaborate and readily share knowledge and skills MUST: Relevant degree/postgraduate degree CHECK Team Member qualification (Crest/CyberScheme) Experience in Cloud Security (AWS/Azure) Please send CV for full details and immediate interviews. We are a preferred supplier to the client.

Adword Job Title: Software Engineer Location: London (hybrid from their Central St Giles office, 3 days onsite 2 remote) Job type: 06 months contract Job Description As a Software Engineer, you have influence well beyond yourself. You often own all aspects of your immediate area of software engineering work. You are distinguished by your ability to self-direct your technical contributions as well as plan and scope for a project. You act as a point of contact for your cross-functional partners. Faced with a problem, you will scope it, research possible solutions and technologies, and recommend a solution that includes both the short-term and long-term needs. Responsibilities include: - Write product or system development code without supervision, conduct testing beyond unit testing (e.g. integration, performance, stress, security, load, fuzz), design code to allow for easy testing and write test case descriptions. Review other engineers' code and provide feedback to ensure best practices (e.g., style guidelines, checking code in, accuracy, testability, and efficiency). Identify critical components and tech debt with high carrying costs. Implement or guide remedies to improve long-term maintainability, modifiability, etc. Managers also oversee their team's coding, testing, and reviewing. - Take ownership of rolling out a project to completion, contributing to qualification, end-user documentation, production deployment/monitoring, process automation, and customer support as needed. Set up or improve test/monitoring/survey infrastructure, systems or practices. Consider engineering excellence (e.g., code health, low toil, system maintainability and scalability over time). Contribute to existing documentation or educational content and adapt content based on product/program updates and user feedback. Triage product or system issues and debug/track/resolve by analyzing the sources of issues and the impact on hardware, network, or service operations and quality. Managers ensure their teams follow the above to drive product excellence. - Design systems within the scope of their area. Clarify problems to understand gaps, break down problems into solvable parts and assess trade-offs to ensure coherent design, participate in or drive design reviews with peers and stakeholders to decide amongst available technologies. Managers also oversee and guide their teams in systems design. For those with employee reports, the amount of direct, technical contributions will be balanced against the amount of management responsibility required in the role. - Set and achieve business goals Deliver business impact for us by setting, communicating, and achieving team priorities that support organizational goals. Align with partners and make key decisions as needed to achieve team objectives. - Support and uphold inclusive team norms Ensure that team norms create belonging, psychological safety, and respect. Facilitate collaboration and open communication to help teams achieve results together. Minimum role qualification requires proficiency in: - Test engineering - Team Management - Data structures and algorithms - Architecture knowledge - Programming - SWE system design - Code and system health - Simplification - Conflict resolution - Data analysis and synthesis - Systems thinking - Code comprehension - Debugging, diagnosis and resolution Key responsibilities:- The talent will be joining the GBO labs team, which functions as an AI accelerator for business operations at Google. The GBO labs team incubates and runs 12-week sprints to deliver new products. The temp's responsibilities will be approximately 70% maintenance of existing products and 30% helping to incubate new products. Maintenance includes building new features, not just support. If you're excited about this role then we would like to hear from you! Please apply with a copy of your CV or send it to Prasanna com and let's start the conversation! Randstad Technologies is acting as an Employment Business in relation to this vacancy.

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. The Role: This role is part of Saab BlueBear in Bedfordshire. You will be required to support a mixture of R&D and product development activities and will be keen to get involved in all development areas, and have a good track history / proven track record in both problem solving and quality software development. Your role as a Sensor Fusion Lead will involve architecting, designing, implementing and testing embedded applications primarily focused around sensor suite integration and fusion. You may also lead a small team of other engineers. Tasks will generally involve architecting software systems and features that facilitate our state of the art methods for navigation in a variety of environments using our in-house fleet of UAVs. Key Responsibilities: Primarily, your role will be to maintain, architect and develop our current sensor fusion capabilities and add new features in a structured and maintainable manner under direction of product owner (Head of Digital Systems). Research, Architect, Design and Test Sensor Fusion algorithms using Mathworks products. Technically lead the software development for Sensor Fusion activities to deliver new features and capabilities to our Autonomy and UAV systems. Ensure the Sensor Fusion software considers and implements redundancy, real-time, safety/critical and security objectives. Proactively engage with other engineers, teams and leadership to ensure needs are understood and met. Gain system wide knowledge and become a subject matter expert in the Sensor Fusion field. Ensure Sensor Fusion knowledge transfer through written and other methods to the rest of the team. Gain understanding and technically contribute to the wider software team and software projects. Skills and Experience: Strong working experience of developing embedded C++ applications. Knowledge of state estimation / sensor fusion / navigation tools and techniques e.g. Kalman filters. Knowledge of the principles and characteristics of sensors and sensing processes. Experience in data processing and analysis. Experience in sensor selection, evaluation and modelling. Understanding of flight mechanics. Software Architecture skills for Embedded Systems and/or backend/server-based applications taking into account constraints of performance, security and redundancy Looks to work collaboratively rather than in isolation. Knowledge of GNSS and other positioning technologies (e.g. Visual Navigation). Working knowledge of Linux and/or real time operating systems such as FreeRTOS. Good understanding of development tool chain for debugging and problem solving using e.g. gdb. Knowledge of networking (e.g.TCP/IP). Knowledge of serial interfaces (e.g. RS422/485). Able to use (or even create) CI/CD pipelines using Jenkins or similar. Knowledge of Matlab/Simulink Testing (Unit, Integration) and/or Test automation experience. Experience as a Technical leader. Experience mentoring junior engineers. Understanding of quality, safety and security standards for software (e.g. DO-178). Good communication skills for internal and external technical discussions. Knowledge of any of the following MQTT, DDS and GIS. Existing SC Clearance would be advantageous. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview

Job Title: Principal Signatures Engineer (Non-Acoustics) Location: Barrow-in-Furness (Onsite). We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: circa £50,000 depending on skills and experience What you'll be doing Lead the development of the Stealth Engineering Above Water Signatures capability Collaborating with cross-functional teams to design low-signature equipment and systems Helping define technical requirements, test methods, and approval criteria Reviewing design documents to confirm that above water signature requirements are met Leading modelling efforts for radar, infrared, visual, and RF signatures using custom and commercial tools Developing testing methodologies to confirm signature performance Managing research with internal teams and university partners Improving stealth features on in-service submarines Your skills and experiences Essential A degree (or equivalent experience) in Maths, Physics, Electrical Engineering, or another STEM field Experience with modelling software or programming tools A strong grasp of electromagnetism, radar, or infrared and visual detection technologies Familiarity with stealth systems or signature control methods Desirable A postgraduate qualification in a STEM subject Experience in defence or large-scale manufacturing Knowledge of submarine or naval systems Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Stealth Engineering Department: As a Principal Engineer, you will be working with a team tasked with assuring the stealth performance of submarines built in Barrow. From concept system designs to the assessment of the whole submarine as part of major commissioning trials, you will be involved in all aspects of the submarine lifecycle from concept through to support of the in-service fleet. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 6th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Software Developer North Wales Competitive Salary A global technology company based in North Wales designs, develops, and manufactures. We currently have an opportunity for a Software Developer to join our multidisciplinary engineering team and contribute to the development of industry-leading solutions. Role & Responsibilities: Design, develop, and maintain software products as directed by the Software Lead or Senior Management. Ensure source control (Git) is used for all projects, following best practices such as branching and merge strategies. Maintain accurate and up-to-date build documentation for all projects. Employ Continuous Integration / Deployment (CI/CD) pipelines where appropriate. Create and maintain unit tests for critical code to ensure reliability and maintainability. Track, manage, and resolve issues via repository cards (e.g., GitHub Issues, Jira, or equivalent). Research and integrate existing open-source packages where suitable, ensuring all third-party code is properly licensed. Collaborate with hardware, firmware, and geophysics colleagues to deliver integrated solutions. Contribute to the development process demonstrating ideas via review meetings. Ensure that all documentation is prepared and supplied with all design changes in accordance with our ISO 9001 system Knowledge, Skills & Experience: Education to degree level in Computer Science, Software Engineering, or related discipline Equivalent industry experience as a proven software developer will be considered. Demonstrated experience in delivering high-quality software solutions within complex engineering or technical domains. Familiarity with UI/UX design principles for customer-facing applications. Strong knowledge of modern frameworks, particularly Vue.js, Node.js, Express, and Electron. Proficiency in Git source control workflows. Understanding of software design patterns and industry best practices. Excellent problem-solving and debugging skills, with the ability to learn quickly and adapt. Benefits Package: A competitive starting Salary Opportunities for technical advancement Hybrid working available Comprehensive private health plan. To apply please email your CV / resume to (url removed) If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.