530 jobs found

Bristol Want to work for growing team with the motivation to excel and a good team spirit? Where you will have the opportunity to apply your experience and passion for navigation sensor technologies to support the development of some of the most advanced missile systems in the world? If so, keep reading! Salary: Up to £57,000, depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: Navigation sensors are a critical technology for missile systems and therefore the team has frequent exposure to high-profile, fast-paced projects with rewarding opportunities. The team is very closely linked with the navigation sensors team in MBDA France with associated travel opportunities. You will carry out specification and assessment of navigation sensors including GNSS receivers, anti-jam units and inertial measurement units. You will monitor supplier and technology roadmaps to identify cutting edge technology for investment, support sub assembly and equipment assessment trials, and undertake research activities as part of an international team. This role offers you the opportunity to be part of a successful team working to develop new and innovative solutions to address complex customer requirements, develop expertise in navigation sensors, take on a key role in several multi-national research programmes, as well as the chance to challenge yourself technically. What we're looking for from you: An experienced defence or aerospace engineer, with a degree in electronic engineering, physics, or similar Technical knowledge in navigation systems, avionics, or RF engineering Project management, delivery, and commercial awareness highly desirable Modelling skills including proficiency with tools such as MATLAB and/or Simulink would be advantageous The ability to gain an understanding of the following: A detailed understanding of all aspects of GNSS functionality, multi-constellation technology and system integration Detailed knowledge of receivers, anti-jam and CRPA's GNSS system chain performance & integration challenges GNSS jamming and spoofing experience Inertial sensor specification and characterisation Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Disability, Neurodiversity and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

An exciting opportunity for an experienced Manufacturing Test Engineer to join our Circuit card assembly Engineering team. This is a fast-paced but friendly and inclusive Manufacturing environment that will challenge you Salary: Circa £45,500 depending on experience Dynamic (hybrid) working: 4 or 5 days per week on-site due to workload classification Security Clearance: British National Only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: As part of our continued growth, we are looking for a highly skilled and methodical Electronics Manufacturing Test Engineer to join our Circuit Card Assembly team. In this critical role, you will specialise in diagnosing faults on PCB assemblies down to component level. Your expertise will be crucial in accurately identifying root causes of failure, providing technical reports and supporting the implementation of corrective actions, which in turn will be utilised to improve production yield and ensure programme targets are achieved. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to time served experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. Key Responsibilities: Technical Root Cause Analysis:Performing fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc. Test Specification/Instruction Generation:Supporting the introduction of new test facilities by generating test specifications, operator instructions, and maintaining appropriate configuration control. Cross-Functional Collaboration:Serving as a key point of contact, collaborating closely with Manufacturing, Quality, Process, Design Engineers, and other stakeholders to overcome technical challenges and drive product improvements. Design & Development Support:Providing crucial Test Engineering input during the design and development phases, from initial concept through to Production Readiness Reviews. What we're looking for from you: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 AND Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject) OR BEng/BSc in relevant Engineering/Technical Degree Expertise in Electronics Test & Diagnosis:A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Test Equipment Experience:Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Manufacturing Systems Proficiency:Familiarity with enterprise resource planning, manufacturing execution and version control system tools (e.g., SAP, MES, PLM) for logging test activities and generating non-conformance quality reports. Desirable Experience working with RF-based circuitry would be preferable, but is not mandatory. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, / Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive (Commensurate with skills and experience) What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control : Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge ! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Stevenage A great opportunity for an EMC Test Engineer to deploy their skills in a state of the art facility surrounded by a wealth of experience! Salary: Up to £55,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to hands on testing (working from home available when not testing). Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year). Pension: maximum total (employer and employee) contribution of up to 14%. Overtime: opportunity for paid overtime. Flexi Leave: Up to 15 additional days. Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The Opportunity The Electromagnetic Compatibility (EMC) department is like no other within MBDA. It is split between a test team working hands on in our state-of-the-art EMC Facility to simulate environments and also a highly skilled project consultancy team that is embedded across all projects within MBDA to ensure good EMC practice & design. This role is in our EMC Test Team, who support MBDA programmes through their product development cycle from Risk Reduction test activities to full Qualification Testing. The majority of the work will be performing various EMC test activities in line with a Test Plan produced by the EMC Project Team as well as the production of the Test Report. The EMC Test Team perform formal tests in the products intended electromagnetic environment at the EMC Laboratories in Bristol. What are we looking for: Essential Previous experience in EMC Testing to Defence Standards. Previous experience using Compliance 5 and EMC 32 Software Higher education or significant experience within subject fields: Electronics, Electrical, Physics, EMC or similar. An understanding of EMC and design principles. Excellent communication skills at all levels, both verbally and in writing. Ability to work to defined deadlines and within budget limits. Excellent Analytical and Problem Solving skills. Professional manner and adaptability when the companies needs are evolving. Capable of working autonomously to meet the delivery needs of the company Desirable Knowledge in the application of a military EMC standard to system, sub-system or equipment level is desirable (e.g. Defence Standard 59-, AECTP500, Mil-Std-461, RTCA DO160 / EUROCAE ED-14). Engineer's with previous experience in delivering support around the subject of electromagnetic compatibility. What's in it for you? Build on your EMC knowledge working alongside the subject matter experts and specialists within the field of EMC. Our team is highly valued in MBDA. We are known as capable, knowledgeable, and we have great test facilities. Opportunities to represent MBDA during discussions with our customers. As EMC specialists, we are able to influence the project teams and how EMC qualification will occur. Potential to participate in research or investigation studies. Ability to bring your ideas and unique skillset to the team. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. This role is part of the Manufacturing UK Test Engineering function and is deployed to the Stevenage-based Manufacturing Equipment team, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent (ideally HND/degree) in a relevant subject, plus significant experience in digital, analogue and RF electronics manufacture and test. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Training and Development: Excellent career progression, training and career development opportunities The opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

Job Title: Electrical Instrumentation Engineer Location: Barrow-in-Furness. On-site Salary: Negotiable, depending on experience What you'll be doing: Liaising with internal customers as required to foster collaborative working relationships and ensure requirements are adequately articulated, understood and met Installation of a variety of different instrumentation around site that captures our customer's needs Fault finding and repairing of legacy equipment Work with BAE Systems' supply chain department and equipment suppliers to deliver equipment that meets customer requirements Where appropriate support factory acceptance trial attendance and submarine system trials and analyse trial results when required Undertake peer reviews or checking/verification tasks as directed Provide support to the Certificate of Design activities Support the production of evidence in support of qualification, legislative requirements and safety justifications and provide specialist support for associated activities Your skills and experiences: Essential: Strong knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures. Excellent problem solving and analytical skills Desirable: EngTech (or be able to satisfy requirements for EngTech) Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Instrumentation Development Services (IDS) team As an Electrical Instrumentation Engineer, you will provide support to the senior and principal engineers and/or external specialists during development of testing regimes and verification activities for platform electronic systems. You will be involved in analysis and production of technical reports supporting system verification. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 8th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Our client, a large Aerospace and Defence supplier is looking for an Electrical/Electronic Architect to join them on a contract basis at their site in Stevenage. Due to the nature of the role, applicants must be eligible to obtain full SC Clearance. Hybrid working, 3 days per week onsite in Stevenage. 6-month initial contract. 60- 85 p/h Umbrella depending on the level of experience, inside IR35 Overview of department: Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: Specifying/determining system electrical requirements interface definitions and characteristics between subsystems/equipment power architecture, including power budget and power profiles data communication and processing architecture requirements for EMC, bonding, grounding and screening signal safety, including routing of safety related signals Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration Reviewing and authoring reports, guidelines and processes Design assessments and analysis Working to defence/industry standards Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: Project manage the equipment(s) on behalf of the project during development, qualification and manufacture Own the requirements on behalf of the project for the equipment(s) Produce Statement(s) of Work for the associated design authority for the equipment(s) Create and update plans showing activities for the equipment(s) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance Hold regular progress reviews with the design authority for the equipment(s) Review qualification verification evidence Track and find resolution to equipment non-compliances Attend and support design reviews Skillset/experience required: Technical experience required: electrical/electronics interface definitions knowledge of defence/industry standards, etc. degree level qualification in a related subject systems engineering writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: defence weapon systems power supplies actuators data communication sensors EMC Health Usage Monitoring Systems (HUMS) Model Based Engineering (MBE)

My client is a leader in the Defence & Security sector! They're seeking a passionate and dedicated Functional Integration Lead Engineer to join their Integration and System Validation team. This is a unique opportunity to work on complex Defence systems within a motivated team environment! Key Responsibilities: Planning the delivery of proving tests to meet programme maturity milestones and support timely clearance certification for trials activities Collaborating with systems and design teams to derive test requirements ensuring comprehensive system level test coverage Overseeing the generation of test instructions, test reports, and supporting safety documentation/processes Integrating multiple variants of subsystems in trials and operational configurations Supporting integration of trials test equipment for use across proving activities Coordinating with design teams to diagnose problems and determine design solutions Supporting trials defect investigations and analysing data as required Defining test and trials equipment requirements Job Requirements: Degree qualified (or equivalent) in electrical/electronic engineering or similar Good understanding of hardware/software integration and test activities Familiarity with general commercial lab test equipment Experience with data analysis tools/methods Experience or personal interest in scripting (e.g., Python or similar) Creativity and practicality to work with complex problems and derive logical solutions Adaptability and innovation in a varied and often fast-paced role Benefits: Company bonus (based on performance) Comprehensive pension scheme with employer and employee contributions Opportunity for paid overtime Up to 15 additional flexi leave days Flexible working arrangements where possible Enhanced parental leave benefits Fantastic site facilities including subsidised meals and free car parking If you are an enthusiastic Integration Engineer looking for a challenging role where you can make a significant impact, I would love to hear from you! Apply now to join our client's dynamic team!

Job Title: Electrical Instrumentation Engineer Location: Barrow-in-Furness. On-site Salary: Negotiable, depending on experience What you'll be doing: Liaising with internal customers as required to foster collaborative working relationships and ensure requirements are adequately articulated, understood and met Installation of a variety of different instrumentation around site that captures our customer's needs Fault finding and repairing of legacy equipment Work with BAE Systems' supply chain department and equipment suppliers to deliver equipment that meets customer requirements Where appropriate support factory acceptance trial attendance and submarine system trials and analyse trial results when required Undertake peer reviews or checking/verification tasks as directed Provide support to the Certificate of Design activities Support the production of evidence in support of qualification, legislative requirements and safety justifications and provide specialist support for associated activities Your skills and experiences: Essential: Strong knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures. Excellent problem solving and analytical skills Desirable: EngTech (or be able to satisfy requirements for EngTech) Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Instrumentation Development Services (IDS) team As an Electrical Instrumentation Engineer, you will provide support to the senior and principal engineers and/or external specialists during development of testing regimes and verification activities for platform electronic systems. You will be involved in analysis and production of technical reports supporting system verification. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 8th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Test Technician - Basingstoke Salary: £28,000 to £32,000 Bonus Hours: Monday to Thursday, 7:30 AM 5:30 PM Location: Basingstoke Join a Leading UK Electronics Manufacturer We are seeking a detail-oriented and technically skilled Test Technician to join our team in a modern, clean manufacturing environment. This role involves performing product testing, quality assurance, and inspection procedures for customers across sectors such as commercial, space, defence, transport, audio, motorsport, and instrumentation. The TechPoint Group, are now one of the largest UK-owned CEMs. We supply EMS and supply chain services to leading technology companies across the UK and Europe. We operate from a modern, clean environment to support customers in the commercial, space, defence, transport, audio, motorsport, and instrumentation sectors. We have opened a new world-class facility and are looking for new talented people to join us on this exciting journey. Key Responsibilities of the Test Technician: Set up and operate test equipment and processes Conduct functional, environmental, and performance tests Record and report test data and deviations Interpret technical drawings and specifications Maintain and calibrate test equipment Collaborate with engineering and quality teams Follow safety regulations and SOPs What Were Looking For: 3-5 years of experience in testing, QA, or manufacturing Background in SMT, aerospace, automotive, or electronics Familiarity with electrical, mechanical, or software testing Strong problem-solving and root cause analysis skills Experience with automated test systems (ICT, functional testers) is a plus Knowledge of ISO standards or Six Sigma principles Why Apply? Competitive salary and bonus structure Four-day working week (MondayThursday) Opportunity to work in a cutting-edge facility Supportive and inclusive team culture Equal Opportunities Statement TechPoint Group is an equal opportunity employer, committed to providing equal opportunities to all individuals, regardless of race, colour, religion, sex, national origin, age, disability, sexual orientation, gender identity, genetic information, or any other characteristic protected by applicable laws. We value diversity and inclusion in our workforce and encourage all qualified candidates to apply. Apply now for the AOI Operator role! INDMAN Due to the volume of applications, if you do not hear back within 5 working days, please assume your application has been unsuccessful. Check our website for more opportunities.

Job Title: Electrical Instrumentation Engineer Location: Barrow-in-Furness. On-site Salary: Negotiable, depending on experience What you'll be doing: Liaising with internal customers as required to foster collaborative working relationships and ensure requirements are adequately articulated, understood and met Installation of a variety of different instrumentation around site that captures our customer's needs Fault finding and repairing of legacy equipment Work with BAE Systems' supply chain department and equipment suppliers to deliver equipment that meets customer requirements Where appropriate support factory acceptance trial attendance and submarine system trials and analyse trial results when required Undertake peer reviews or checking/verification tasks as directed Provide support to the Certificate of Design activities Support the production of evidence in support of qualification, legislative requirements and safety justifications and provide specialist support for associated activities Your skills and experiences: Essential: Strong knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures. Excellent problem solving and analytical skills Desirable: EngTech (or be able to satisfy requirements for EngTech) Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Instrumentation Development Services (IDS) team As an Electrical Instrumentation Engineer, you will provide support to the senior and principal engineers and/or external specialists during development of testing regimes and verification activities for platform electronic systems. You will be involved in analysis and production of technical reports supporting system verification. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 8th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, / Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive (Commensurate with skills and experience) What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control : Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge ! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Python Quant Dev - Cash Equities/Algo/Backtesting/Trading/Market Making Responsibilities Research and analyse trading outcomes to assess effectiveness of execution strategies Build and refine quantitative models to improve algorithmic trading performance Implement elements of trading logic in Python and work closely with engineering teams Partner with clients to explain model behaviour, review performance and gather feedback Support clients in an execution consulting capacity to optimise use of trading products Key Skills & Experience Strong quantitative mindset with passion for data and research Strong Python development skills (Java exposure beneficial but not core) Experience with electronic trading strategies and market microstructure Knowledge of European equities markets Exposure to distributed systems and large-scale data analysis desirable Excellent communication skills; able to work with global teams and clients High-frequency trading experience advantageous Permanent role - Central London based - hybrid working By applying to this job you are sending us your CV, which may contain personal information. Please refer to our Privacy Notice to understand how we process this information. In short, in order to supply you with work finding services, we will hold and process your personal data, and only with your express permission we will share this personal data with a client (or a third party working on behalf of the client) by email or by upload to the Client/third parties vendor management system. By giving us permission to send your CV to a client, this constitutes permission to share the personal data that would be necessary to consider your application, interview you (Phone/video/face to face) and if successful hire you. Scope AT acts as an employment agency for Permanent Recruitment and an employment business for the supply of temporary workers. By applying for this job you accept the Terms and Conditions, Data Protection Policy, Privacy Notice and Disclaimers which can be found at our website.

Job title: Rolling Stock Overhaul Electrical Technician Job Type: Temporary Contract IR35 Status: Inside IR35 Start date: Immediate Duration: 12 month contract Potential for extension Pay rate: Competitive Location: Longsight, Manchester, M12 4HR Hours of work: Full Time - 40.00 per week (48 hours per week once fully operational) Shift pattern: Days & Nights Mon-Fri on a 2-week rotating shift (once fully operational) The Opportunity Rullion are proud to be recruiting an Overhaul Electrical Technician to support a major rolling stock overhaul programme based in Manchester. You'll be joining a well-established, highly skilled team of over 80 rail professionals, working on the overhaul of Class 390 high-speed trains - one of the most iconic and technically advanced fleets operating in the UK today. This is an excellent long-term contract opportunity to work at a state-of-the-art Train Care Centre, contributing to the reliability, safety and performance of a globally recognised high-speed fleet. The Role As an Overhaul Electrical Technician, you will play a key role in the service, maintenance, repair and overhaul of modern rolling stock, working in line with detailed Vehicle Maintenance Instructions (VMIs). Safety, quality and continuous improvement will be at the heart of everything you do. Key Responsibilities Provide technical support and fault-finding expertise to the overhaul team Carry out electrical fault diagnosis, investigation and rectification Undertake component exchange, testing and re-commissioning activities Perform static testing and support dynamic test runs post-overhaul Download, analyse and record data from critical performance systems Functionally test train-borne systems using computer-based diagnostic tools Accurately record fault data and upload to shared systems Support validation of maintenance, repair and modification documentation Use depot systems including Alista, SAP and SES (or future IT systems) Carry out general depot duties, including Line of Route tasks Operate cranes and lifting equipment (where trained and competent) Mentor colleagues and support team development when required Always work in compliance with safety rules, H&S legislation, COSHH and lifesaving rules What We're Looking For Qualifications HNC in Electrical or Electronic Engineering (or higher), or NVQ Level 3 in Electrical Engineering Skills & Knowledge Strong practical knowledge of electrical, electronic and mechanical systems Experience working on modern EMUs or similar complex assets Confident using IT systems and computer-based diagnostics Experience Rolling Stock experience preferred Applicants from Aerospace, Heavy Transport, Electric Vehicles or Ex-Forces Engineering backgrounds are also encouraged to apply Additional Requirements Must live within a reasonable commuting distance of Manchester Right to work in the UK Ability to provide proof of technical qualifications Willingness to work days and nights on a rotating shift pattern What's On Offer Long-term contract with strong potential for extension PPE provided by Rullion Full tooling provided on site On-site mess room with kitchen facilities Coverall cleaning service Changing facilities, lockers and showers Safety This is a safety-critical environment. Successful candidates will be required to undergo Drugs & Alcohol testing and work in strict accordance with Health & Safety controls and procedures at all times. If you're an experienced Electrical Technician looking to work on a flagship high-speed rail project in Manchester, this is a standout opportunity to advance your rail career with the support of a specialist recruitment partner. Please note that applicants must have the right to work in the UK. We cannot provide VISA sponsorship. Interested in this position? please click "apply now" We try to respond to all applicants, but sometimes this is not possible due to high volumes of applications; if you have not heard from us within 14 days, regrettably it means you have been unsuccessful on this occasion. This vacancy is being advertised by Rullion Ltd acting as an employment business Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands, to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base; from small start-ups to large household names. We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.

Our client, a leader within the defence sector, is seeking an Electronics Engineer to join our Calibration & Maintenance Team, to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE). These tasks include fault finding and repair of test equipment, supporting routine calibrations, commissioning of Test Equipment and drift analysis. The successful candidate will be working within an experienced team of Calibration & Maintenance Engineers supporting complex test platforms in the manufacture and test of complex missile systems. They will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. What we're looking for from you: Minimum qualification: HNC/HND in Electrical & Electronics Engineering. Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level. Good understanding of calibration principles and processes. Able to mentor other or more junior staff when requested by line manager. Able to deal with multiple issues, tasks and priorities concurrently. Analytical and problem solving skills. Good communication skills with the ability to tailor communication to the relevant audience. A good understanding of SAP would be desirable. Experience of working on Environmental Chambers an advantage.

Job Title: Electrical Instrumentation Engineer Location: Barrow-in-Furness. On-site Salary: Negotiable, depending on experience What you'll be doing: Liaising with internal customers as required to foster collaborative working relationships and ensure requirements are adequately articulated, understood and met Installation of a variety of different instrumentation around site that captures our customer's needs Fault finding and repairing of legacy equipment Work with BAE Systems' supply chain department and equipment suppliers to deliver equipment that meets customer requirements Where appropriate support factory acceptance trial attendance and submarine system trials and analyse trial results when required Undertake peer reviews or checking/verification tasks as directed Provide support to the Certificate of Design activities Support the production of evidence in support of qualification, legislative requirements and safety justifications and provide specialist support for associated activities Your skills and experiences: Essential: Strong knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures. Excellent problem solving and analytical skills Desirable: EngTech (or be able to satisfy requirements for EngTech) Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Instrumentation Development Services (IDS) team As an Electrical Instrumentation Engineer, you will provide support to the senior and principal engineers and/or external specialists during development of testing regimes and verification activities for platform electronic systems. You will be involved in analysis and production of technical reports supporting system verification. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 8th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.