My client, a market leading Building Services Consultancy who specialise in sustainable infrastructure and innovative low carbon builds, are searching for a Senior Mechanical Engineer to join their team in Manchester. As a Senior Mechanical Engineer, you will join a supportive team based in Manchester to complete sustainable HVAC designs for education, healthcare, leisure, residential, and commercial developments across the UK. As Senior Mechanical Engineer you will be expected to complete detailed mechanical designs including heating, ventilation, plumbing and air-conditioning using AutoCAD and Revit. You will also be expected to complete 2D and 3D models, perform heat load calculations, duct sizing, pipe sizing, and equipment selection using relevant software (e.g., Revit, AutoCAD, HAP, or Elite). - Prepare and review mechanical drawings, schematics, simulations and technical specifications in accordance with building codes, sustainability goals, and project requirements. -Design to BIM level 2 in accordance with British Standards PAS 1192-5 -Collaborate with electrical, plumbing, and structural engineers to ensure coordinated MEP layouts and avoid design clashes. - Attend internal and client meetings to resolve design issues/queries and align project objectives. -Review designs submitted by the team and respond to RFIs (Requests for Information). -Site visits to monitor installation quality, verify compliance with original designs and highlight issues during construction. -Evaluate new materials and designs ensuring energy efficiency and cost-effectiveness. This role offers a competitive salary, flexible benefits and sustainable infrastructure projects across the UK. You will also have the chance to progress your career, mentor team members and have the option to manage the team. As a Senior Mechanical Engineer, you will be expected to have a BSc and/or an MSc Mechanical Engineering or Building Services Engineering and have experience working for UK based Consultancy completing detailed HVAC designs for residential and commercial developments using AutoCAD and Revit You are also required to have experience managing projects, mentoring team members and have a detailed knowledge PAS 1192-5 and other relevant codes. You will also be expected to have a keen understanding of BREEAM and net zero. If this role is of interest to you, please contact Jordanna Morris at Aztrum. You will also be required to check technical work, mentor team members and complete complex electrical designs for mixed use developments. You will also be expected to deliver projects to time and budget, meeting Clients expectations and assist with site visits to meet and coordinate between internal and external design teams, clients, architects and contractors to discuss sustainable design concepts. This role offers a competitive salary, flexible benefits and sustainable infrastructure projects across the UK. You will also have the chance to progress your career, mentor team members and have the option to manage the team. If this role is of interest to you, please contact Jordanna Morris at Aztrum Recruitment.
Feb 07, 2026
Full time
My client, a market leading Building Services Consultancy who specialise in sustainable infrastructure and innovative low carbon builds, are searching for a Senior Mechanical Engineer to join their team in Manchester. As a Senior Mechanical Engineer, you will join a supportive team based in Manchester to complete sustainable HVAC designs for education, healthcare, leisure, residential, and commercial developments across the UK. As Senior Mechanical Engineer you will be expected to complete detailed mechanical designs including heating, ventilation, plumbing and air-conditioning using AutoCAD and Revit. You will also be expected to complete 2D and 3D models, perform heat load calculations, duct sizing, pipe sizing, and equipment selection using relevant software (e.g., Revit, AutoCAD, HAP, or Elite). - Prepare and review mechanical drawings, schematics, simulations and technical specifications in accordance with building codes, sustainability goals, and project requirements. -Design to BIM level 2 in accordance with British Standards PAS 1192-5 -Collaborate with electrical, plumbing, and structural engineers to ensure coordinated MEP layouts and avoid design clashes. - Attend internal and client meetings to resolve design issues/queries and align project objectives. -Review designs submitted by the team and respond to RFIs (Requests for Information). -Site visits to monitor installation quality, verify compliance with original designs and highlight issues during construction. -Evaluate new materials and designs ensuring energy efficiency and cost-effectiveness. This role offers a competitive salary, flexible benefits and sustainable infrastructure projects across the UK. You will also have the chance to progress your career, mentor team members and have the option to manage the team. As a Senior Mechanical Engineer, you will be expected to have a BSc and/or an MSc Mechanical Engineering or Building Services Engineering and have experience working for UK based Consultancy completing detailed HVAC designs for residential and commercial developments using AutoCAD and Revit You are also required to have experience managing projects, mentoring team members and have a detailed knowledge PAS 1192-5 and other relevant codes. You will also be expected to have a keen understanding of BREEAM and net zero. If this role is of interest to you, please contact Jordanna Morris at Aztrum. You will also be required to check technical work, mentor team members and complete complex electrical designs for mixed use developments. You will also be expected to deliver projects to time and budget, meeting Clients expectations and assist with site visits to meet and coordinate between internal and external design teams, clients, architects and contractors to discuss sustainable design concepts. This role offers a competitive salary, flexible benefits and sustainable infrastructure projects across the UK. You will also have the chance to progress your career, mentor team members and have the option to manage the team. If this role is of interest to you, please contact Jordanna Morris at Aztrum Recruitment.
We're looking for a Senior Engineer to join our Design team based in Bristol. Kier Design are a top-25 engineering consultancy, You'll be working within Kier 700 strong internal consultancy Kier Design supporting with the delivery of Civil Infrastructure Engineering related services. You will also contribute to the delivery of more complex services by providing solutions which are safe and buildable whilst achieving the clients' goals. We believe in building teams around our people, rather than squeezing people into our teams, and we want to help you carve out a role in which you'll grow and thrive for many years to come. We offer market-leading development opportunities, supporting our graduates through the early stages of their careers, enabling our people to become professionally qualified, providing management training and qualifications, and supporting ongoing technical development throughout our people's careers., we actively promote, so you can keep pushing and stretching yourself. Within this role, you can enjoy competitive annual holiday entitlement with opportunities to buy leave, a fantastic, matched pension scheme, a share in the success you help to create by investing in Kier through our Sharesave and Share Incentive Plans and even more Location : Bristol Hours : 37.5 hours per week - some flexibility on hours available if desired, just let us know when you speak to us What will you be responsible for? As a Senior Engineer , you'll be working within the Structural and Geotechnical Engineering team, supporting Kier in delivering infrastructure projects for clients such as the Environment Agency, Severn Trent, and Mining Remediation Authority. Your day to day will include: Reviewing and agreeing technical requirements of the client remit, ensuring it is fully understood, questioning, and challenging where necessary Contributing to the development of fee proposals Organising and leading the day-to-day workload of engineers and technical staff within the Design team, ensuring technical compliance of the design to the remit Maintaining compliance with applicable legal requirements and company policies / procedures and where applicable client procedures, including CDM Regulations, the Kier SHE Management System (SHEMS) and design Quality Management System (QMS) Contributing to the financial and commercial management of projects such as progress monitoring, change control, and delivering to the agreed programme and budget with the support of the Engineering Manager and Commercial Manager, delivering alternative solutions and value engineering, enhancing Kier's competitive position What are we looking for? This role of Senior Engineer is great for you if: Experience in design delivery, including multidisciplinary design,comfortable using your own judgement when managing uncertainty and technical risk, whilst learning and working in new areas with support from colleagues Extensive postgraduate experience in the design of hydraulic structures or / and river engineering, or similar which reflects a role of this level Chartered or Incorporated member of a relevant professional institution (e.g., CEng MICE) Driving licence to visit various sites and offices Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here . Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here . We look forward to seeing your application to join the
Feb 07, 2026
Full time
We're looking for a Senior Engineer to join our Design team based in Bristol. Kier Design are a top-25 engineering consultancy, You'll be working within Kier 700 strong internal consultancy Kier Design supporting with the delivery of Civil Infrastructure Engineering related services. You will also contribute to the delivery of more complex services by providing solutions which are safe and buildable whilst achieving the clients' goals. We believe in building teams around our people, rather than squeezing people into our teams, and we want to help you carve out a role in which you'll grow and thrive for many years to come. We offer market-leading development opportunities, supporting our graduates through the early stages of their careers, enabling our people to become professionally qualified, providing management training and qualifications, and supporting ongoing technical development throughout our people's careers., we actively promote, so you can keep pushing and stretching yourself. Within this role, you can enjoy competitive annual holiday entitlement with opportunities to buy leave, a fantastic, matched pension scheme, a share in the success you help to create by investing in Kier through our Sharesave and Share Incentive Plans and even more Location : Bristol Hours : 37.5 hours per week - some flexibility on hours available if desired, just let us know when you speak to us What will you be responsible for? As a Senior Engineer , you'll be working within the Structural and Geotechnical Engineering team, supporting Kier in delivering infrastructure projects for clients such as the Environment Agency, Severn Trent, and Mining Remediation Authority. Your day to day will include: Reviewing and agreeing technical requirements of the client remit, ensuring it is fully understood, questioning, and challenging where necessary Contributing to the development of fee proposals Organising and leading the day-to-day workload of engineers and technical staff within the Design team, ensuring technical compliance of the design to the remit Maintaining compliance with applicable legal requirements and company policies / procedures and where applicable client procedures, including CDM Regulations, the Kier SHE Management System (SHEMS) and design Quality Management System (QMS) Contributing to the financial and commercial management of projects such as progress monitoring, change control, and delivering to the agreed programme and budget with the support of the Engineering Manager and Commercial Manager, delivering alternative solutions and value engineering, enhancing Kier's competitive position What are we looking for? This role of Senior Engineer is great for you if: Experience in design delivery, including multidisciplinary design,comfortable using your own judgement when managing uncertainty and technical risk, whilst learning and working in new areas with support from colleagues Extensive postgraduate experience in the design of hydraulic structures or / and river engineering, or similar which reflects a role of this level Chartered or Incorporated member of a relevant professional institution (e.g., CEng MICE) Driving licence to visit various sites and offices Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here . Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here . We look forward to seeing your application to join the
Contract Senior Design Engineer We are seeking a highly skilled Contract Senior Design Engineer to support Design in Catia V5 for long-term Aircraft CAD based repair projects. This is based on development of wing structure definition to structural sizing, interface and project requirements Toolsets. This is an initial 12 month Inside IR35 contract supporting our end client based in our offices in Bristol. Key Requirements Catia V5 capability to support parametric model generation and update Catia V5 capability to support 2d drawing generation for detail parts and installations Understanding of Airbus modelling methodologies and processes Ability to interpret Airbus stress sizing data and project requirements to support CAD design solutions Interface management between wing structural components and systems Awareness of manufacturing and installation processes for consideration in design solutions Knowledge of repair processes Microsoft office applications - excel, ppt etc. PLM - PASS Preferred Experience Repair project experience Wing structure design solutions What We Offer Hybrid working Competitive Inside IR35 contract terms About Us: Belcan, a Cognizant company, is a global force in technical services and engineering consultancy. Our legacy is built on delivering high-quality outputs and our unwavering commitment to developing the next generation of technical consultants and specialist engineers. Our expertise is vast, spanning across various engineering industries including aerospace, defence, marine, nuclear, automotive, and Cyber security. This vacancy is being advertised by Belcan
Feb 07, 2026
Contractor
Contract Senior Design Engineer We are seeking a highly skilled Contract Senior Design Engineer to support Design in Catia V5 for long-term Aircraft CAD based repair projects. This is based on development of wing structure definition to structural sizing, interface and project requirements Toolsets. This is an initial 12 month Inside IR35 contract supporting our end client based in our offices in Bristol. Key Requirements Catia V5 capability to support parametric model generation and update Catia V5 capability to support 2d drawing generation for detail parts and installations Understanding of Airbus modelling methodologies and processes Ability to interpret Airbus stress sizing data and project requirements to support CAD design solutions Interface management between wing structural components and systems Awareness of manufacturing and installation processes for consideration in design solutions Knowledge of repair processes Microsoft office applications - excel, ppt etc. PLM - PASS Preferred Experience Repair project experience Wing structure design solutions What We Offer Hybrid working Competitive Inside IR35 contract terms About Us: Belcan, a Cognizant company, is a global force in technical services and engineering consultancy. Our legacy is built on delivering high-quality outputs and our unwavering commitment to developing the next generation of technical consultants and specialist engineers. Our expertise is vast, spanning across various engineering industries including aerospace, defence, marine, nuclear, automotive, and Cyber security. This vacancy is being advertised by Belcan
STRUCTURAL STEELWORK ESTIMATOR Salary Circa £45 Location: Cheslyn Hay, Staffordshire Description Due to partial retirement of our senior Sales/Estimating Manager we require a fully experienced steelwork estimator to work alongside our existing professional team of estimators with excellent future opportunity to head the department Structural Steelwork Estimator Daily responsibilities: Reporting to the Sales Manager. Working to engineer and Architect s drawings and doing take offs. Liaising with interested parties. Proficient in using Microsoft Excel and Microsoft Word. Structural Steelwork Estimator Role requirements: Full knowledge of the industry. The ability to read engineers, Architect s and construction drawings. Ability to provide fully detailed competitive quotations for all types of structural steelwork, staircases & balustrades. Good communication skills. We offer a pleasant working environment with friendly staff and a first-class remuneration package working for a family business. Salary/Benefits: Salary commensurate with experience but circa £45 plus benefits Full Staff Position with potential to expand the role Car and fuel allowance. Pension Contribution. Flexible Holidays.
Feb 07, 2026
Full time
STRUCTURAL STEELWORK ESTIMATOR Salary Circa £45 Location: Cheslyn Hay, Staffordshire Description Due to partial retirement of our senior Sales/Estimating Manager we require a fully experienced steelwork estimator to work alongside our existing professional team of estimators with excellent future opportunity to head the department Structural Steelwork Estimator Daily responsibilities: Reporting to the Sales Manager. Working to engineer and Architect s drawings and doing take offs. Liaising with interested parties. Proficient in using Microsoft Excel and Microsoft Word. Structural Steelwork Estimator Role requirements: Full knowledge of the industry. The ability to read engineers, Architect s and construction drawings. Ability to provide fully detailed competitive quotations for all types of structural steelwork, staircases & balustrades. Good communication skills. We offer a pleasant working environment with friendly staff and a first-class remuneration package working for a family business. Salary/Benefits: Salary commensurate with experience but circa £45 plus benefits Full Staff Position with potential to expand the role Car and fuel allowance. Pension Contribution. Flexible Holidays.
Senior Structural Engineer - Northern Ireland An industry-leading civil engineering and construction contractor is seeking a Senior Structural Engineer to join their expanding Northern Ireland team. This is a rare opportunity to contribute to some of the UK and Ireland's most technically demanding and high-profile infrastructure projects, working across sectors including aviation, defence, nuclea
Feb 06, 2026
Full time
Senior Structural Engineer - Northern Ireland An industry-leading civil engineering and construction contractor is seeking a Senior Structural Engineer to join their expanding Northern Ireland team. This is a rare opportunity to contribute to some of the UK and Ireland's most technically demanding and high-profile infrastructure projects, working across sectors including aviation, defence, nuclea
Are you a Structural Engineer with 4+ years experience looking to take the next step in your career? We re working with a well-established consulting engineering practice who are looking to add a talented engineer to their growing team. This is an excellent opportunity to join a respected consultancy working across a wide variety of small to medium-scale projects. You ll gain exposure to hands-on engineering, technical design and client interaction, with strong support from senior engineers. You ll be involved in: Structural design and analysis for a diverse range of projects Small works, domestic extensions and timber-frame structures Multi-unit residential developments Industrial portal frame buildings Collaborating with internal teams and external clients Progressing towards chartership (or developing further post-chartership) They are looking for someone with: 4+ years experience in structural engineering Chartered or actively working towards chartership (IStructE / ICE) Experience across small projects through to residential and industrial schemes Strong communication and client-facing skills Able to work both independently and within a collaborative team environment This is a fantastic opportunity to grow within an established, supportive consultancy and gain exposure to a varied workload with genuine responsibility. This is a great chance for career development and chartership support with flexible hybrid working after the initial six-month period. If this role appeals to you then please apply now or call Marie on (phone number removed) quoting J46451 for a confidential chat. Legal Information: We act as an employment agency for permanent work and as an employment business for temporary work. For roles in the UK, applicants must be eligible to live and work in the UK. We value diversity and promote equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all areas of society and can discuss any reasonable adjustments to support your application.
Feb 06, 2026
Full time
Are you a Structural Engineer with 4+ years experience looking to take the next step in your career? We re working with a well-established consulting engineering practice who are looking to add a talented engineer to their growing team. This is an excellent opportunity to join a respected consultancy working across a wide variety of small to medium-scale projects. You ll gain exposure to hands-on engineering, technical design and client interaction, with strong support from senior engineers. You ll be involved in: Structural design and analysis for a diverse range of projects Small works, domestic extensions and timber-frame structures Multi-unit residential developments Industrial portal frame buildings Collaborating with internal teams and external clients Progressing towards chartership (or developing further post-chartership) They are looking for someone with: 4+ years experience in structural engineering Chartered or actively working towards chartership (IStructE / ICE) Experience across small projects through to residential and industrial schemes Strong communication and client-facing skills Able to work both independently and within a collaborative team environment This is a fantastic opportunity to grow within an established, supportive consultancy and gain exposure to a varied workload with genuine responsibility. This is a great chance for career development and chartership support with flexible hybrid working after the initial six-month period. If this role appeals to you then please apply now or call Marie on (phone number removed) quoting J46451 for a confidential chat. Legal Information: We act as an employment agency for permanent work and as an employment business for temporary work. For roles in the UK, applicants must be eligible to live and work in the UK. We value diversity and promote equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all areas of society and can discuss any reasonable adjustments to support your application.
Head of Substation - Plant & P&C DesignLondon, Stowmarket, Leeds HybridPermanent - Full TimeCompetitive (DOE) + Car/ Car Allowance & Flexible Benefits As Head of Substation (Plant & P&C Design) you will lead the substation engineering function responsible for both electrical plant and Protection & Control (P&C) design across substations from distribution up to transmission voltages (typically 33kV-400kV). You will act as the technical authority and strategic lead for substation design, ensuring delivery of safe, compliant, high-quality engineering solutions that meet client requirements, regulatory standards, and industry best practice. You will shape technical strategy, develop design processes, manage multi-disciplinary teams, support business development, and engage with key external stakeholders including UK Transmission Operators (e.g., National Grid, SSEN), Distribution Network Operators, contractors, and clients. Some of the key deliverables in this role will include: Strategic Leadership Lead and evolve the substation design function (both Plant and P&C disciplines), defining technical standards, best practices, and long-term capability goals. Champion safety-by-design, quality assurance, and compliance with UK/EU legislation and industry standards (ENA, BS, IEC). Align design resources with business strategy, project pipeline, and client commitments. Technical Authority Oversee Primary (Plant) design , including specification, layout, and detailed engineering of switchgear, transformers, buswork, earthing, auxiliary supplies, and associated equipment. Direct Protection & Control design strategy, including protection philosophies, schemes, relay settings, interlocking, SCADA interfaces, logic, and communications systems. Approve design deliverables, ensuring technical integrity, constructability, and compliance with relevant utility technical requirements. Project Delivery & Governance Provide technical governance on major substation projects from concept through FEED, detailed design, construction support, and commissioning. Drive quality, consistency, and risk mitigation across design work packages and oversee design assurance processes. Engage in tender preparation, bid support, estimating, and scope definition to secure new work. People Leadership Build, coach, and mentor a high-performing team of engineers and technical specialists. Define career pathways, training plans, and performance objectives within the substation design function. Facilitate effective multidisciplinary collaboration with civil, structural, overhead line, cables, and project management teams. Client & Stakeholder Engagement Act as a senior technical representative in meetings with clients, regulators, and partners. Liaise with external design houses, equipment vendors, contractors, and suppliers to optimise technical solutions and delivery outcomes. Manage feedback loops with clients to inform continuous improvement and foster strong commercial relationships. Does this sound like a role you have envisaged yourself in? What we're looking for: Proven senior experience in substation design leadership within the UK-Transmission & Distribution sector. Deep understanding of electrical plant engineering and Protection & Control systems for substation environments up to 400kV. Strong knowledge of UK/National Grid technical standards, grid codes, and regulatory frameworks. Experience with design tools and engineering software (e.g., AutoCAD, EPlan, ETAP/DIgSILENT, protection coordination tools). Qualifications MEng / BEng Degree in Electrical Engineering Chartered Engineer (CEng) with IET (or working towards it) advantageous. Previous experience interfacing with UK Transmission Operators (e.g., National Grid ESO) and DNOs Why Join Us? At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: Pension with up to 8% employer contribution Private Medical Insurance Personal Wellbeing and Volunteer Days Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle) Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes) Ongoing Training & Development Programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us : Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Feb 06, 2026
Full time
Head of Substation - Plant & P&C DesignLondon, Stowmarket, Leeds HybridPermanent - Full TimeCompetitive (DOE) + Car/ Car Allowance & Flexible Benefits As Head of Substation (Plant & P&C Design) you will lead the substation engineering function responsible for both electrical plant and Protection & Control (P&C) design across substations from distribution up to transmission voltages (typically 33kV-400kV). You will act as the technical authority and strategic lead for substation design, ensuring delivery of safe, compliant, high-quality engineering solutions that meet client requirements, regulatory standards, and industry best practice. You will shape technical strategy, develop design processes, manage multi-disciplinary teams, support business development, and engage with key external stakeholders including UK Transmission Operators (e.g., National Grid, SSEN), Distribution Network Operators, contractors, and clients. Some of the key deliverables in this role will include: Strategic Leadership Lead and evolve the substation design function (both Plant and P&C disciplines), defining technical standards, best practices, and long-term capability goals. Champion safety-by-design, quality assurance, and compliance with UK/EU legislation and industry standards (ENA, BS, IEC). Align design resources with business strategy, project pipeline, and client commitments. Technical Authority Oversee Primary (Plant) design , including specification, layout, and detailed engineering of switchgear, transformers, buswork, earthing, auxiliary supplies, and associated equipment. Direct Protection & Control design strategy, including protection philosophies, schemes, relay settings, interlocking, SCADA interfaces, logic, and communications systems. Approve design deliverables, ensuring technical integrity, constructability, and compliance with relevant utility technical requirements. Project Delivery & Governance Provide technical governance on major substation projects from concept through FEED, detailed design, construction support, and commissioning. Drive quality, consistency, and risk mitigation across design work packages and oversee design assurance processes. Engage in tender preparation, bid support, estimating, and scope definition to secure new work. People Leadership Build, coach, and mentor a high-performing team of engineers and technical specialists. Define career pathways, training plans, and performance objectives within the substation design function. Facilitate effective multidisciplinary collaboration with civil, structural, overhead line, cables, and project management teams. Client & Stakeholder Engagement Act as a senior technical representative in meetings with clients, regulators, and partners. Liaise with external design houses, equipment vendors, contractors, and suppliers to optimise technical solutions and delivery outcomes. Manage feedback loops with clients to inform continuous improvement and foster strong commercial relationships. Does this sound like a role you have envisaged yourself in? What we're looking for: Proven senior experience in substation design leadership within the UK-Transmission & Distribution sector. Deep understanding of electrical plant engineering and Protection & Control systems for substation environments up to 400kV. Strong knowledge of UK/National Grid technical standards, grid codes, and regulatory frameworks. Experience with design tools and engineering software (e.g., AutoCAD, EPlan, ETAP/DIgSILENT, protection coordination tools). Qualifications MEng / BEng Degree in Electrical Engineering Chartered Engineer (CEng) with IET (or working towards it) advantageous. Previous experience interfacing with UK Transmission Operators (e.g., National Grid ESO) and DNOs Why Join Us? At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: Pension with up to 8% employer contribution Private Medical Insurance Personal Wellbeing and Volunteer Days Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle) Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes) Ongoing Training & Development Programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us : Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Head of Substation - Plant & P&C DesignLondon, Stowmarket, Leeds HybridPermanent - Full TimeCompetitive (DOE) + Car/ Car Allowance & Flexible Benefits As Head of Substation (Plant & P&C Design) you will lead the substation engineering function responsible for both electrical plant and Protection & Control (P&C) design across substations from distribution up to transmission voltages (typically 33kV-400kV). You will act as the technical authority and strategic lead for substation design, ensuring delivery of safe, compliant, high-quality engineering solutions that meet client requirements, regulatory standards, and industry best practice. You will shape technical strategy, develop design processes, manage multi-disciplinary teams, support business development, and engage with key external stakeholders including UK Transmission Operators (e.g., National Grid, SSEN), Distribution Network Operators, contractors, and clients. Some of the key deliverables in this role will include: Strategic Leadership Lead and evolve the substation design function (both Plant and P&C disciplines), defining technical standards, best practices, and long-term capability goals. Champion safety-by-design, quality assurance, and compliance with UK/EU legislation and industry standards (ENA, BS, IEC). Align design resources with business strategy, project pipeline, and client commitments. Technical Authority Oversee Primary (Plant) design , including specification, layout, and detailed engineering of switchgear, transformers, buswork, earthing, auxiliary supplies, and associated equipment. Direct Protection & Control design strategy, including protection philosophies, schemes, relay settings, interlocking, SCADA interfaces, logic, and communications systems. Approve design deliverables, ensuring technical integrity, constructability, and compliance with relevant utility technical requirements. Project Delivery & Governance Provide technical governance on major substation projects from concept through FEED, detailed design, construction support, and commissioning. Drive quality, consistency, and risk mitigation across design work packages and oversee design assurance processes. Engage in tender preparation, bid support, estimating, and scope definition to secure new work. People Leadership Build, coach, and mentor a high-performing team of engineers and technical specialists. Define career pathways, training plans, and performance objectives within the substation design function. Facilitate effective multidisciplinary collaboration with civil, structural, overhead line, cables, and project management teams. Client & Stakeholder Engagement Act as a senior technical representative in meetings with clients, regulators, and partners. Liaise with external design houses, equipment vendors, contractors, and suppliers to optimise technical solutions and delivery outcomes. Manage feedback loops with clients to inform continuous improvement and foster strong commercial relationships. Does this sound like a role you have envisaged yourself in? What we're looking for: Proven senior experience in substation design leadership within the UK-Transmission & Distribution sector. Deep understanding of electrical plant engineering and Protection & Control systems for substation environments up to 400kV. Strong knowledge of UK/National Grid technical standards, grid codes, and regulatory frameworks. Experience with design tools and engineering software (e.g., AutoCAD, EPlan, ETAP/DIgSILENT, protection coordination tools). Qualifications MEng / BEng Degree in Electrical Engineering Chartered Engineer (CEng) with IET (or working towards it) advantageous. Previous experience interfacing with UK Transmission Operators (e.g., National Grid ESO) and DNOs Why Join Us? At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: Pension with up to 8% employer contribution Private Medical Insurance Personal Wellbeing and Volunteer Days Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle) Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes) Ongoing Training & Development Programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us : Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Feb 06, 2026
Full time
Head of Substation - Plant & P&C DesignLondon, Stowmarket, Leeds HybridPermanent - Full TimeCompetitive (DOE) + Car/ Car Allowance & Flexible Benefits As Head of Substation (Plant & P&C Design) you will lead the substation engineering function responsible for both electrical plant and Protection & Control (P&C) design across substations from distribution up to transmission voltages (typically 33kV-400kV). You will act as the technical authority and strategic lead for substation design, ensuring delivery of safe, compliant, high-quality engineering solutions that meet client requirements, regulatory standards, and industry best practice. You will shape technical strategy, develop design processes, manage multi-disciplinary teams, support business development, and engage with key external stakeholders including UK Transmission Operators (e.g., National Grid, SSEN), Distribution Network Operators, contractors, and clients. Some of the key deliverables in this role will include: Strategic Leadership Lead and evolve the substation design function (both Plant and P&C disciplines), defining technical standards, best practices, and long-term capability goals. Champion safety-by-design, quality assurance, and compliance with UK/EU legislation and industry standards (ENA, BS, IEC). Align design resources with business strategy, project pipeline, and client commitments. Technical Authority Oversee Primary (Plant) design , including specification, layout, and detailed engineering of switchgear, transformers, buswork, earthing, auxiliary supplies, and associated equipment. Direct Protection & Control design strategy, including protection philosophies, schemes, relay settings, interlocking, SCADA interfaces, logic, and communications systems. Approve design deliverables, ensuring technical integrity, constructability, and compliance with relevant utility technical requirements. Project Delivery & Governance Provide technical governance on major substation projects from concept through FEED, detailed design, construction support, and commissioning. Drive quality, consistency, and risk mitigation across design work packages and oversee design assurance processes. Engage in tender preparation, bid support, estimating, and scope definition to secure new work. People Leadership Build, coach, and mentor a high-performing team of engineers and technical specialists. Define career pathways, training plans, and performance objectives within the substation design function. Facilitate effective multidisciplinary collaboration with civil, structural, overhead line, cables, and project management teams. Client & Stakeholder Engagement Act as a senior technical representative in meetings with clients, regulators, and partners. Liaise with external design houses, equipment vendors, contractors, and suppliers to optimise technical solutions and delivery outcomes. Manage feedback loops with clients to inform continuous improvement and foster strong commercial relationships. Does this sound like a role you have envisaged yourself in? What we're looking for: Proven senior experience in substation design leadership within the UK-Transmission & Distribution sector. Deep understanding of electrical plant engineering and Protection & Control systems for substation environments up to 400kV. Strong knowledge of UK/National Grid technical standards, grid codes, and regulatory frameworks. Experience with design tools and engineering software (e.g., AutoCAD, EPlan, ETAP/DIgSILENT, protection coordination tools). Qualifications MEng / BEng Degree in Electrical Engineering Chartered Engineer (CEng) with IET (or working towards it) advantageous. Previous experience interfacing with UK Transmission Operators (e.g., National Grid ESO) and DNOs Why Join Us? At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: Pension with up to 8% employer contribution Private Medical Insurance Personal Wellbeing and Volunteer Days Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle) Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes) Ongoing Training & Development Programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us : Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Senior Civil Design Engineer Permanent Leeds, North England Competitive Salary + Car/Car Allowance + Flexible Benefits Summary: Are you an experienced Civil Engineer with a passion for civil engineering and the energy sector? Freedom Professional Services are seeking an individual with a strong technical expertise in a broad range of civil engineering disciplines to join our growing electricity transmission and distribution design team. With your strong technical expertise, you will be asked to lead the civil design of electricity substations across the UK from concept to completion and be able to work in close collaboration with other internal teams (electrical design, structural, surveys, wayleaves, cables, environmental), along with clients and stakeholders to ensure that all requirements are met. As a Senior Civil Engineer, you will have the opportunity to work on design frameworks for DNO's, as well as design and build opportunities for high profile clients and iconic projects, ensuring that all work is completed to the highest standard. You will be involved in every aspect of the project, from planning and cost estimation to construction and quality control. Some of the key deliverables in this role will include: Lead the production and review of engineering drawings engineering drawings, calculations, specifications, and reports for masonry buildings, steel portal frames, transformer bunds, drainage systems and roads, on projects ranging in construction contract value of £100K - £20M. Collaborate with clients and internal teams to ensure the effective delivery of projects, providing updates and identifying issues that could risk programme, quality or cost. Attend progress meetings as required at client/contractor offices or construction sites. Attend design team meetings to ensure the timely flow and release of quality information and to ensure that this information corresponds with the scope of works. Management of design risks to deliver buildable solutions. Provide engineering solutions to site-based problems through TQ/RFI process. Mentoring junior team members, providing technical guidance and promoting professional development Taking responsibility for your own professional development in line with current best practice, legislative changes, and customer requirements. We are looking for an experienced and ambitious civil engineer with the following attributes: A proven experience of working in a design environment for the construction of traditional masonry buildings, steel portal frames and reinforced concrete. Experience in client-facing roles, with the ability to manage client relationships effectively Ability to lead delivery of multiple simultaneous technical projects in a challenging environment. Strong communication skills to engage in technical discussions with colleagues, non-technical staff, and clients. Strong commitment to ongoing professional development and continuous learning You'll have a degree in Civil Engineering (or related subject) and be working toward Chartered or Incorporated status with a relevant professional body such as ICE. Desirable: Experience working within the electricity distribution sector, particularly in substation design and electrical infrastructure Practical experience with AutoCAD, Revit and Civils3D for civil engineering design Full UK driving licence. Benefits: We are always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Competitive salary Car or Car allowance 25 days holiday plus Bank Holidays Pension with a leading provider and employer contribution Sick Pay Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes Personal development programme. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be. LI-CN1
Feb 06, 2026
Full time
Senior Civil Design Engineer Permanent Leeds, North England Competitive Salary + Car/Car Allowance + Flexible Benefits Summary: Are you an experienced Civil Engineer with a passion for civil engineering and the energy sector? Freedom Professional Services are seeking an individual with a strong technical expertise in a broad range of civil engineering disciplines to join our growing electricity transmission and distribution design team. With your strong technical expertise, you will be asked to lead the civil design of electricity substations across the UK from concept to completion and be able to work in close collaboration with other internal teams (electrical design, structural, surveys, wayleaves, cables, environmental), along with clients and stakeholders to ensure that all requirements are met. As a Senior Civil Engineer, you will have the opportunity to work on design frameworks for DNO's, as well as design and build opportunities for high profile clients and iconic projects, ensuring that all work is completed to the highest standard. You will be involved in every aspect of the project, from planning and cost estimation to construction and quality control. Some of the key deliverables in this role will include: Lead the production and review of engineering drawings engineering drawings, calculations, specifications, and reports for masonry buildings, steel portal frames, transformer bunds, drainage systems and roads, on projects ranging in construction contract value of £100K - £20M. Collaborate with clients and internal teams to ensure the effective delivery of projects, providing updates and identifying issues that could risk programme, quality or cost. Attend progress meetings as required at client/contractor offices or construction sites. Attend design team meetings to ensure the timely flow and release of quality information and to ensure that this information corresponds with the scope of works. Management of design risks to deliver buildable solutions. Provide engineering solutions to site-based problems through TQ/RFI process. Mentoring junior team members, providing technical guidance and promoting professional development Taking responsibility for your own professional development in line with current best practice, legislative changes, and customer requirements. We are looking for an experienced and ambitious civil engineer with the following attributes: A proven experience of working in a design environment for the construction of traditional masonry buildings, steel portal frames and reinforced concrete. Experience in client-facing roles, with the ability to manage client relationships effectively Ability to lead delivery of multiple simultaneous technical projects in a challenging environment. Strong communication skills to engage in technical discussions with colleagues, non-technical staff, and clients. Strong commitment to ongoing professional development and continuous learning You'll have a degree in Civil Engineering (or related subject) and be working toward Chartered or Incorporated status with a relevant professional body such as ICE. Desirable: Experience working within the electricity distribution sector, particularly in substation design and electrical infrastructure Practical experience with AutoCAD, Revit and Civils3D for civil engineering design Full UK driving licence. Benefits: We are always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Competitive salary Car or Car allowance 25 days holiday plus Bank Holidays Pension with a leading provider and employer contribution Sick Pay Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes Personal development programme. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be. LI-CN1
Estimator £45,000 + Enhanced Benefits, Medical, Training and Progression Pontefract Monday - Friday, 37.5 hours per week, Early Finish Fridays Are you an estimator, looking to join a successful, growing company in a role offering variety and a technical challenge? Are you looking for an opportunity to work on bespoke projects with customers across energy, oil and gas, power industries and more? This is an excellent opportunity to join a well-established, leading engineering business as part of a collaborative proposals team. You will prepare accurate, compliant estimates, analyse client specifications and drawings, producing proposal drawings where required, and support projects from concept through to completion. This is a stable, office-based role offering excellent work-life balance, early Friday finishes, and a strong benefits package, within a supportive and professional engineering environment. This role would suit a motivated individual with a passion for making a difference on bespoke projects, looking for long-term stability, technical variety, and opportunities to develop within an established proposals team. REF 4884 - The Role: Estimator - Bespoke Projects Cost Analysis and Proposals Supporting Projects through to completion Office based role The Candidate: Engineering experience - Mechanical or Electrical Commutable to South Kirkby 2D CAD KnowledgeElix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Estimator Technical Proposal Cost Analyis Project Engineering Engineer Mechanical Electrical Design Mechanical Engineer CAD Engineer SolidWorks AutoCAD Fabrication Sheet Metal Structural Energy Power Industrial Manufacturing Yorkshire South Yorkshire
Feb 06, 2026
Full time
Estimator £45,000 + Enhanced Benefits, Medical, Training and Progression Pontefract Monday - Friday, 37.5 hours per week, Early Finish Fridays Are you an estimator, looking to join a successful, growing company in a role offering variety and a technical challenge? Are you looking for an opportunity to work on bespoke projects with customers across energy, oil and gas, power industries and more? This is an excellent opportunity to join a well-established, leading engineering business as part of a collaborative proposals team. You will prepare accurate, compliant estimates, analyse client specifications and drawings, producing proposal drawings where required, and support projects from concept through to completion. This is a stable, office-based role offering excellent work-life balance, early Friday finishes, and a strong benefits package, within a supportive and professional engineering environment. This role would suit a motivated individual with a passion for making a difference on bespoke projects, looking for long-term stability, technical variety, and opportunities to develop within an established proposals team. REF 4884 - The Role: Estimator - Bespoke Projects Cost Analysis and Proposals Supporting Projects through to completion Office based role The Candidate: Engineering experience - Mechanical or Electrical Commutable to South Kirkby 2D CAD KnowledgeElix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Estimator Technical Proposal Cost Analyis Project Engineering Engineer Mechanical Electrical Design Mechanical Engineer CAD Engineer SolidWorks AutoCAD Fabrication Sheet Metal Structural Energy Power Industrial Manufacturing Yorkshire South Yorkshire
Head of Substation - Plant & P&C DesignLondon, Stowmarket, Leeds HybridPermanent - Full TimeCompetitive (DOE) + Car/ Car Allowance & Flexible Benefits As Head of Substation (Plant & P&C Design) you will lead the substation engineering function responsible for both electrical plant and Protection & Control (P&C) design across substations from distribution up to transmission voltages (typically 33kV-400kV). You will act as the technical authority and strategic lead for substation design, ensuring delivery of safe, compliant, high-quality engineering solutions that meet client requirements, regulatory standards, and industry best practice. You will shape technical strategy, develop design processes, manage multi-disciplinary teams, support business development, and engage with key external stakeholders including UK Transmission Operators (e.g., National Grid, SSEN), Distribution Network Operators, contractors, and clients. Some of the key deliverables in this role will include: Strategic Leadership Lead and evolve the substation design function (both Plant and P&C disciplines), defining technical standards, best practices, and long-term capability goals. Champion safety-by-design, quality assurance, and compliance with UK/EU legislation and industry standards (ENA, BS, IEC). Align design resources with business strategy, project pipeline, and client commitments. Technical Authority Oversee Primary (Plant) design , including specification, layout, and detailed engineering of switchgear, transformers, buswork, earthing, auxiliary supplies, and associated equipment. Direct Protection & Control design strategy, including protection philosophies, schemes, relay settings, interlocking, SCADA interfaces, logic, and communications systems. Approve design deliverables, ensuring technical integrity, constructability, and compliance with relevant utility technical requirements. Project Delivery & Governance Provide technical governance on major substation projects from concept through FEED, detailed design, construction support, and commissioning. Drive quality, consistency, and risk mitigation across design work packages and oversee design assurance processes. Engage in tender preparation, bid support, estimating, and scope definition to secure new work. People Leadership Build, coach, and mentor a high-performing team of engineers and technical specialists. Define career pathways, training plans, and performance objectives within the substation design function. Facilitate effective multidisciplinary collaboration with civil, structural, overhead line, cables, and project management teams. Client & Stakeholder Engagement Act as a senior technical representative in meetings with clients, regulators, and partners. Liaise with external design houses, equipment vendors, contractors, and suppliers to optimise technical solutions and delivery outcomes. Manage feedback loops with clients to inform continuous improvement and foster strong commercial relationships. Does this sound like a role you have envisaged yourself in? What we're looking for: Proven senior experience in substation design leadership within the UK-Transmission & Distribution sector. Deep understanding of electrical plant engineering and Protection & Control systems for substation environments up to 400kV. Strong knowledge of UK/National Grid technical standards, grid codes, and regulatory frameworks. Experience with design tools and engineering software (e.g., AutoCAD, EPlan, ETAP/DIgSILENT, protection coordination tools). Qualifications MEng / BEng Degree in Electrical Engineering Chartered Engineer (CEng) with IET (or working towards it) advantageous. Previous experience interfacing with UK Transmission Operators (e.g., National Grid ESO) and DNOs Why Join Us? At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: Pension with up to 8% employer contribution Private Medical Insurance Personal Wellbeing and Volunteer Days Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle) Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes) Ongoing Training & Development Programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us : Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Feb 06, 2026
Full time
Head of Substation - Plant & P&C DesignLondon, Stowmarket, Leeds HybridPermanent - Full TimeCompetitive (DOE) + Car/ Car Allowance & Flexible Benefits As Head of Substation (Plant & P&C Design) you will lead the substation engineering function responsible for both electrical plant and Protection & Control (P&C) design across substations from distribution up to transmission voltages (typically 33kV-400kV). You will act as the technical authority and strategic lead for substation design, ensuring delivery of safe, compliant, high-quality engineering solutions that meet client requirements, regulatory standards, and industry best practice. You will shape technical strategy, develop design processes, manage multi-disciplinary teams, support business development, and engage with key external stakeholders including UK Transmission Operators (e.g., National Grid, SSEN), Distribution Network Operators, contractors, and clients. Some of the key deliverables in this role will include: Strategic Leadership Lead and evolve the substation design function (both Plant and P&C disciplines), defining technical standards, best practices, and long-term capability goals. Champion safety-by-design, quality assurance, and compliance with UK/EU legislation and industry standards (ENA, BS, IEC). Align design resources with business strategy, project pipeline, and client commitments. Technical Authority Oversee Primary (Plant) design , including specification, layout, and detailed engineering of switchgear, transformers, buswork, earthing, auxiliary supplies, and associated equipment. Direct Protection & Control design strategy, including protection philosophies, schemes, relay settings, interlocking, SCADA interfaces, logic, and communications systems. Approve design deliverables, ensuring technical integrity, constructability, and compliance with relevant utility technical requirements. Project Delivery & Governance Provide technical governance on major substation projects from concept through FEED, detailed design, construction support, and commissioning. Drive quality, consistency, and risk mitigation across design work packages and oversee design assurance processes. Engage in tender preparation, bid support, estimating, and scope definition to secure new work. People Leadership Build, coach, and mentor a high-performing team of engineers and technical specialists. Define career pathways, training plans, and performance objectives within the substation design function. Facilitate effective multidisciplinary collaboration with civil, structural, overhead line, cables, and project management teams. Client & Stakeholder Engagement Act as a senior technical representative in meetings with clients, regulators, and partners. Liaise with external design houses, equipment vendors, contractors, and suppliers to optimise technical solutions and delivery outcomes. Manage feedback loops with clients to inform continuous improvement and foster strong commercial relationships. Does this sound like a role you have envisaged yourself in? What we're looking for: Proven senior experience in substation design leadership within the UK-Transmission & Distribution sector. Deep understanding of electrical plant engineering and Protection & Control systems for substation environments up to 400kV. Strong knowledge of UK/National Grid technical standards, grid codes, and regulatory frameworks. Experience with design tools and engineering software (e.g., AutoCAD, EPlan, ETAP/DIgSILENT, protection coordination tools). Qualifications MEng / BEng Degree in Electrical Engineering Chartered Engineer (CEng) with IET (or working towards it) advantageous. Previous experience interfacing with UK Transmission Operators (e.g., National Grid ESO) and DNOs Why Join Us? At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: Pension with up to 8% employer contribution Private Medical Insurance Personal Wellbeing and Volunteer Days Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle) Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes) Ongoing Training & Development Programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us : Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
J. Murphy & Sons Ltd
New Ollerton, Nottinghamshire
Murphy is recruiting for a title to work with Energy based out of any Murphy main site as part of our delivery of the Great Grid partnership (GGP) Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Design Manager Lead the engineering design delivery of Linear Cables , connecting the project to National Grid. Lead Design Management requirements at tender and/or Early Contractor Engagement stage and allocate resources as appropriate during tender, FEED, and detailed design stages. Integrate multiple engineering disciplines from a mix of internal and external designers and OEMs. Undertake the role of Principal Design Representative on project(s) ensuring design information is being suitable managed to the various roles and compliant with the requirements of CDM 2015 Regulations Involvement in the development of Business Unit and Group Design Management continual process improvement activities Review design pack submissions as required for technical compliance, quality and completeness. Develop and assist the project Planners with maintaining the design and engineering aspect of programmes. Monitor and expedite key engineering programme issues including the procurement of services and equipment to the Business Unit Procurement function. Review and liaise with internal Temporary Works Coordinators and Designers to ensure appropriate consideration of constructability and required permanent works. Manage compliance with Standards and Client requirements and assist in monitoring to ensure working to standard requirements. Ensure an understanding of, and an influence on the contracts Design Consultants are working under including their fees, schedule of services, programme, and liabilities and warranties. Review and comment the payment applications from consultants and pass to the contract surveyor for processing and payment. Represent the department, when necessary, at internal and external meetings and in the absence of the Senior Engineering Manager Line management of a sub-team of design coordinators including mentoring and assisting their development and learning Still interested, does this sound like you? Chartered Engineer with a UK engineering institute (IMechE, ICE, IChemE. IET, IGEM etc) Experience in either HV Cables, HV Plant, National Grid, DNO's ,Pipelines or Substations would be ideal. Experience within Structural OR Civil Engineering Experience managing BIM delivery, experience of hand over of design requirements at completion.
Feb 06, 2026
Full time
Murphy is recruiting for a title to work with Energy based out of any Murphy main site as part of our delivery of the Great Grid partnership (GGP) Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Design Manager Lead the engineering design delivery of Linear Cables , connecting the project to National Grid. Lead Design Management requirements at tender and/or Early Contractor Engagement stage and allocate resources as appropriate during tender, FEED, and detailed design stages. Integrate multiple engineering disciplines from a mix of internal and external designers and OEMs. Undertake the role of Principal Design Representative on project(s) ensuring design information is being suitable managed to the various roles and compliant with the requirements of CDM 2015 Regulations Involvement in the development of Business Unit and Group Design Management continual process improvement activities Review design pack submissions as required for technical compliance, quality and completeness. Develop and assist the project Planners with maintaining the design and engineering aspect of programmes. Monitor and expedite key engineering programme issues including the procurement of services and equipment to the Business Unit Procurement function. Review and liaise with internal Temporary Works Coordinators and Designers to ensure appropriate consideration of constructability and required permanent works. Manage compliance with Standards and Client requirements and assist in monitoring to ensure working to standard requirements. Ensure an understanding of, and an influence on the contracts Design Consultants are working under including their fees, schedule of services, programme, and liabilities and warranties. Review and comment the payment applications from consultants and pass to the contract surveyor for processing and payment. Represent the department, when necessary, at internal and external meetings and in the absence of the Senior Engineering Manager Line management of a sub-team of design coordinators including mentoring and assisting their development and learning Still interested, does this sound like you? Chartered Engineer with a UK engineering institute (IMechE, ICE, IChemE. IET, IGEM etc) Experience in either HV Cables, HV Plant, National Grid, DNO's ,Pipelines or Substations would be ideal. Experience within Structural OR Civil Engineering Experience managing BIM delivery, experience of hand over of design requirements at completion.
Our client, a large Aerospace and Defence supplier is looking for a Mechanical Design Engineer to join them on a contract basis at their site in Basildon. Due to the nature of the project, applicants must hold the sole British nationality and hold SC Clearance. 6 month initial contract Location: Basildon, 4 day per week onsite Rate: 64.22 p/h Umbrella Key Responsibility Areas Support senior members of staff in the delivery of technical solutions on critical Business Programmes. Generation of mechanical solutions to relevant company and international standards. Design of engineering solutions taking into account all requirements including product quality, safety, reliability, testability, sustainability, etc. Mechanical engineering detailed design, including numerical calculations, tolerance studies, etc. Produce Manufacturing Data Packs in line with BS8888 including appropriate application of GD&T. Generate BoM within approve PLM system (Teamcenter). Contribute to reviews of Mechanical designs in accordance with business and industry standards. Deliver design solutions against Technical Requirements, within budget and timescales. Skills, Qualifications & Knowledge Experience in: Technical or science degree qualified, or equivalent, with experience. Mechanical engineering for Electronic Products (including EO). Perform 'hands on' mechanical design and development using 3D CAD software (PTC Creo). Structural design and an ability to carry out 'first pass' analyses and work in conjunction with full-time Structural Analysts. Experienced in working on Electro-Optic Products, with proven knowledge of electrical screening, grounding, opto-mechanical sub-assemblies, etc. Detail and assembly drawing generation, in accordance with BS8888. Numerical calculations, tolerance studies, etc. Proven understanding of the application of materials and process finishes to meet EO Product needs. Experienced in the design of Jigs, Fixtures and Tooling to support the Assembly, Integration and Testing of EO Products, for the Aerospace and/or Defence sector. Ability to work within a multi-discipline IPT. Knowledge of Cable Harness design, including Connector selection, screening, strain relief methods, etc. Experienced in various aspects of DfX, including Manufacturing, Assembly, Test, Integration and Sustainability. Operating in a high performing multi-disciplinary Team. Desirable: Capable of performing 'first pass' Thermal analyses.
Feb 05, 2026
Contractor
Our client, a large Aerospace and Defence supplier is looking for a Mechanical Design Engineer to join them on a contract basis at their site in Basildon. Due to the nature of the project, applicants must hold the sole British nationality and hold SC Clearance. 6 month initial contract Location: Basildon, 4 day per week onsite Rate: 64.22 p/h Umbrella Key Responsibility Areas Support senior members of staff in the delivery of technical solutions on critical Business Programmes. Generation of mechanical solutions to relevant company and international standards. Design of engineering solutions taking into account all requirements including product quality, safety, reliability, testability, sustainability, etc. Mechanical engineering detailed design, including numerical calculations, tolerance studies, etc. Produce Manufacturing Data Packs in line with BS8888 including appropriate application of GD&T. Generate BoM within approve PLM system (Teamcenter). Contribute to reviews of Mechanical designs in accordance with business and industry standards. Deliver design solutions against Technical Requirements, within budget and timescales. Skills, Qualifications & Knowledge Experience in: Technical or science degree qualified, or equivalent, with experience. Mechanical engineering for Electronic Products (including EO). Perform 'hands on' mechanical design and development using 3D CAD software (PTC Creo). Structural design and an ability to carry out 'first pass' analyses and work in conjunction with full-time Structural Analysts. Experienced in working on Electro-Optic Products, with proven knowledge of electrical screening, grounding, opto-mechanical sub-assemblies, etc. Detail and assembly drawing generation, in accordance with BS8888. Numerical calculations, tolerance studies, etc. Proven understanding of the application of materials and process finishes to meet EO Product needs. Experienced in the design of Jigs, Fixtures and Tooling to support the Assembly, Integration and Testing of EO Products, for the Aerospace and/or Defence sector. Ability to work within a multi-discipline IPT. Knowledge of Cable Harness design, including Connector selection, screening, strain relief methods, etc. Experienced in various aspects of DfX, including Manufacturing, Assembly, Test, Integration and Sustainability. Operating in a high performing multi-disciplinary Team. Desirable: Capable of performing 'first pass' Thermal analyses.
Are you a Structural Engineer with around 5 years experience looking to progress towards chartership? A respected consulting engineering practice based in Glasgow, is looking to expand their team with a talented engineer. This is an excellent opportunity to join a supportive consultancy and work across a variety of building projects. You ll gain exposure to hands-on engineering, technical design, and client engagement, with mentorship and guidance from experienced senior engineers. Your role will include structural design and analysis across a range of projects, building projects including domestic extensions, small works, and timber-frame structures, residential developments and industrial portal frame buildings and collaborating with internal teams and external clients. They are looking for someone with around 5 years structural engineering experience, ideally with building experience, Chartered or actively working towards chartership (IStructE /ICE), strong communication and client-facing skills and the ability to work independently and collaboratively within a team This is a fantastic opportunity to develop your career within a well-established consultancy, gain exposure to a varied workload, and take on genuine responsibility. There is strong support for chartership and flexible hybrid working available after an initial period. Apply now or call Marie on (phone number removed) quoting J46453 for a confidential chat. Legal Information: We act as an employment agency for permanent work and as an employment business for temporary work. For roles in the UK, applicants must be eligible to live and work in the UK. We value diversity and promote equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all areas of society and can discuss any reasonable adjustments to support your application.
Feb 05, 2026
Full time
Are you a Structural Engineer with around 5 years experience looking to progress towards chartership? A respected consulting engineering practice based in Glasgow, is looking to expand their team with a talented engineer. This is an excellent opportunity to join a supportive consultancy and work across a variety of building projects. You ll gain exposure to hands-on engineering, technical design, and client engagement, with mentorship and guidance from experienced senior engineers. Your role will include structural design and analysis across a range of projects, building projects including domestic extensions, small works, and timber-frame structures, residential developments and industrial portal frame buildings and collaborating with internal teams and external clients. They are looking for someone with around 5 years structural engineering experience, ideally with building experience, Chartered or actively working towards chartership (IStructE /ICE), strong communication and client-facing skills and the ability to work independently and collaboratively within a team This is a fantastic opportunity to develop your career within a well-established consultancy, gain exposure to a varied workload, and take on genuine responsibility. There is strong support for chartership and flexible hybrid working available after an initial period. Apply now or call Marie on (phone number removed) quoting J46453 for a confidential chat. Legal Information: We act as an employment agency for permanent work and as an employment business for temporary work. For roles in the UK, applicants must be eligible to live and work in the UK. We value diversity and promote equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all areas of society and can discuss any reasonable adjustments to support your application.
Hays Specialist Recruitment Limited
Bathgate, West Lothian
Your new company You will be joining a well-established public sector organisation that delivers Roads and Transportation services across the region. The Structures team plays a key role in assessing, maintaining and improving bridges and other highway structures that support the wider network. You will be part of a collaborative engineering environment where safety, quality and effective service delivery are at the heart of everything they do. Your new role Lead on the design of new works and improvements for bridges and highway structures Manage general and principal inspections, condition assessments and maintenance activities Oversee asset data management for all structures Prepare surveys, designs, contracts and supervise works on site Handle contract payments, variations, claims and disputes Plan, prioritise and organise team workloads to meet timescales and budgets Monitor and report project progress to the Design Engineering Manager Develop solutions to a wide range of structural and design issues Manage abnormal load routing Ensure procurement follows council Standing Orders Allocate work, identify resource gaps and support staff development Lead on customer enquiries and complaints Carry out recruitment, performance reviews, disciplinary matters and absence management Lead regular team briefings Act as Client and Principal Designer under CDM regulations Ensure health and safety compliance across all activities Represent Roads and Transportation at meetings and committees Support and deputise for the Design Engineering Manager when required Contribute to capital and revenue budget management Prepare and present reports for internal and external groups Contribute to corporate governance, compliance and performance Lead on preparation and monitoring of the Service Asset Management Plan What you'll need to succeed Chartered Engineer registered with the Engineering Council Extensive experience in bridges and highway structures Strong communication and stakeholder management skills Proven project management experience Working knowledge of contract management Strong understanding of health and safety legislation Full driving licence Desirable Degree in civil or structural engineering Postgraduate qualification Experience managing a team IOSH Managing Safely or similar Knowledge of AutoCAD or asset management software Local government experience Understanding of pavement construction over structures What you'll get in return Opportunity to lead key infrastructure projects with regional impact Supportive and professional engineering environment Access to car pool scheme / service vehicles Ongoing training and development Stable public sector environment with progression opportunities What you need to do now If you're interested in this role, click apply now to forward an up to date copy of your CV, or call us now. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Feb 05, 2026
Seasonal
Your new company You will be joining a well-established public sector organisation that delivers Roads and Transportation services across the region. The Structures team plays a key role in assessing, maintaining and improving bridges and other highway structures that support the wider network. You will be part of a collaborative engineering environment where safety, quality and effective service delivery are at the heart of everything they do. Your new role Lead on the design of new works and improvements for bridges and highway structures Manage general and principal inspections, condition assessments and maintenance activities Oversee asset data management for all structures Prepare surveys, designs, contracts and supervise works on site Handle contract payments, variations, claims and disputes Plan, prioritise and organise team workloads to meet timescales and budgets Monitor and report project progress to the Design Engineering Manager Develop solutions to a wide range of structural and design issues Manage abnormal load routing Ensure procurement follows council Standing Orders Allocate work, identify resource gaps and support staff development Lead on customer enquiries and complaints Carry out recruitment, performance reviews, disciplinary matters and absence management Lead regular team briefings Act as Client and Principal Designer under CDM regulations Ensure health and safety compliance across all activities Represent Roads and Transportation at meetings and committees Support and deputise for the Design Engineering Manager when required Contribute to capital and revenue budget management Prepare and present reports for internal and external groups Contribute to corporate governance, compliance and performance Lead on preparation and monitoring of the Service Asset Management Plan What you'll need to succeed Chartered Engineer registered with the Engineering Council Extensive experience in bridges and highway structures Strong communication and stakeholder management skills Proven project management experience Working knowledge of contract management Strong understanding of health and safety legislation Full driving licence Desirable Degree in civil or structural engineering Postgraduate qualification Experience managing a team IOSH Managing Safely or similar Knowledge of AutoCAD or asset management software Local government experience Understanding of pavement construction over structures What you'll get in return Opportunity to lead key infrastructure projects with regional impact Supportive and professional engineering environment Access to car pool scheme / service vehicles Ongoing training and development Stable public sector environment with progression opportunities What you need to do now If you're interested in this role, click apply now to forward an up to date copy of your CV, or call us now. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
About us HSB (UK and Ireland) , is a leading specialist provider of engineering, technology and structural warranty insurance solutions, plant and equipment inspection services, and engineering-based risk management activities in the UK and Ireland. HSB (UK and Ireland) consists of the parent company HSB Engineering Insurance Limited (HSBEIL) together with its two UK subsidiaries, HSB Engineering Inspection Services Limited (HSBEISL); and a regulated MGA, MD Insurance Services Limited (MDIS), which trades as Premier Guarantee or LABC Warranty. Collectively HSB is the UK and Ireland's only group of companies solely focused on providing specialist engineering and technology insurance solutions and risk focused inspection services and assessments to its customers. Please see our website for more information. Job title Head of LABC Warranty Sales Location Home-based Division Commercial Reporting to Commercial Director Job Purpose Reporting directly to the Commercial Director, this role will be responsible for formulating, developing and implementing the agreed plans for the Local Authority Building Control Warranty (LABCW) relationship, in order to grow the LABCW portfolio, generate sustainable and profitable growth. Responsible for leading the LABCW Sales team, they will deliver new business acquisition whilst maintaining the required high standards of the business to deliver our proposition. This role will be central to developing the relationship with the LABC membership body as well as LABC organizations at a regional level. This role will be required to work with stakeholders (internal and external) up to and including Board Level and will therefore require an extremely knowledgeable, commercially astute, experienced and dynamic individual with outstanding written and verbal skills together with the ability to adapt communication styles to enable collaborative and successful working relationships at all levels. In addition to leading on the strategic development of the LABC account ensuring their needs are met, the role will also be responsible for managing and coordinating the involvement of all key MD Group functional colleagues to ensure LABC are supported and their requirements met. Key Responsibilities Client Relationship Management: Accountable for the strategic development of LABC relationships working at senior and Board level to ensure alignment with key business objectives and that LABC needs are met Develop and maintain strong, trusted relationships with key decision-makers across the LABC matrix, ensuring high levels of customer satisfaction and loyalty. Accountable for the development and implementation of the LABC strategy that will enable the successful achievement of business and financial objectives and targets, and attain the desired financial growth in the identified target sectors Account Planning and Management: Develop strategic account plans, and execute sales strategies to drive revenue growth and expand the company's footprint within LABC Conduct regular business reviews, analyse client needs, and develop tailored solutions to meet LABC needs, ensuring alignment with the company's offerings and strategic objectives. Sales and Revenue Growth: Lead and develop the LABC Sales Team, so that productive and mutually beneficial relationships are engendered and strategically developed to maximise future business opportunities and maximise return on HSB Building Warranty's investment. Undertake regular performance appraisals with all reporting team members, identifying individual development needs of team members to ensure performance is addressed effectively and promptly Effectively coach and mentor the LABC sales team to a highly resourceful and experienced team that can deliver a high standard of service to LABC clients and customers. Ensure the CRM/Pipeline, commercial collateral is fully utilised and updated to accurately document profiles and contacts, detail potential future business opportunities and monitor progress and completion of business opportunities Ensure the team are always compliant with HSB Building Warranty business standards, processes and procedures and that revised procedures to meeting changing compliance requirements are effectively implemented Stakeholder Management: Build and maintain strong relationships with internal stakeholders, to ensure seamless delivery of our proposition to LABC. Ensure key business functions have clear understanding and objectives around the agreed delivery promises for LABC clients/customers. Head of LABCW Sales will conduct regular internal review meetings where our internal performance across all business functions is discussed against our commitments to LABC. Actions taken and monitored to improve our service delivery/proposition. Ensuring a team approach Is taken to the management of key LABC stakeholders. Engaging appropriate stakeholders directly with LABC and its clients to widen and deepen our relationship. Proposition Development and Market Insight: Working with Marketing, lead the development and ongoing refresh of a value proposition for LABC Delivering a proposition that makes it "Easy to do business with us" Strategically and continually review market trends and competitor activity to identify: opportunities which will maximize our market presence and provide sustainable financial profit monitor any threats within the market and interpret the potential impact on MD Groups service delivery and the LABC offering. Skills & Experience Strong sales and relationship management experience gained in relevant insurance environment. Strong strategic account management development capability Strong commercial awareness with demonstrable negotiation and influencing skills Ability to build and maintain strong client relationships Comprehensive understanding of insurance business processes Exceptional internal stakeholder management, Demonstrable coaching and mentoring experience Strategic and business planning experience Experience of high-level decision making Demonstrable management and leadership experience with ability to inspire and motivate team members to achieve exceptional results Excellent interpersonal and communication skills Qualifications and Educational Requirements: CII Level 3 Certificate in Insurance desirable Personal Attributes Confident and assertive, with a strong sense of self-awareness and emotional intelligence Demonstrated integrity and trustworthiness, with a proven track record of acting with transparency, honesty, ownership, and accountability Self-motivated with a proactive approach to problem-solving and decision-making Collaborative approach to business goals and team targets Pragmatic decision-maker with analytical and reasoning skills Resilience and adaptability, with the ability to navigate complex and ambiguous situations Diversity, Equity & Inclusion At HSB, Diversity, Equity, and Inclusion foster innovation and resilience and enable us to act braver and better. Embracing the power of DEI is at the core of who we are. We recognise diversity can be multi-dimensional, intersectional, and complex, so we want to build a diverse workforce that includes a wide range of racial, ethnic, sexual, and gender identities; economic and geographic backgrounds; physical abilities; ages; life, school, and career experiences; and political, religious, and personal beliefs. Additionally, we are committed to building an equitable and inclusive work environment where this diversity is celebrated, valued, and has equitable opportunities to succeed. All candidates in consideration for any role can request a reasonable adjustment at any point in our recruitment process. You can request an adjustment by speaking to your Talent Acquisition contact. Benefits 25 days Annual Leave + Bank Holidays + Well-being days 10% Employer Pension contribution, with the opportunity to join a salary sacrifice scheme Eligibility for an Annual Bonus Private Medical Insurance (PMI) Life Assurance (PHI) Hybrid Working available, with office in Birkenhead, Manchester and London
Feb 05, 2026
Full time
About us HSB (UK and Ireland) , is a leading specialist provider of engineering, technology and structural warranty insurance solutions, plant and equipment inspection services, and engineering-based risk management activities in the UK and Ireland. HSB (UK and Ireland) consists of the parent company HSB Engineering Insurance Limited (HSBEIL) together with its two UK subsidiaries, HSB Engineering Inspection Services Limited (HSBEISL); and a regulated MGA, MD Insurance Services Limited (MDIS), which trades as Premier Guarantee or LABC Warranty. Collectively HSB is the UK and Ireland's only group of companies solely focused on providing specialist engineering and technology insurance solutions and risk focused inspection services and assessments to its customers. Please see our website for more information. Job title Head of LABC Warranty Sales Location Home-based Division Commercial Reporting to Commercial Director Job Purpose Reporting directly to the Commercial Director, this role will be responsible for formulating, developing and implementing the agreed plans for the Local Authority Building Control Warranty (LABCW) relationship, in order to grow the LABCW portfolio, generate sustainable and profitable growth. Responsible for leading the LABCW Sales team, they will deliver new business acquisition whilst maintaining the required high standards of the business to deliver our proposition. This role will be central to developing the relationship with the LABC membership body as well as LABC organizations at a regional level. This role will be required to work with stakeholders (internal and external) up to and including Board Level and will therefore require an extremely knowledgeable, commercially astute, experienced and dynamic individual with outstanding written and verbal skills together with the ability to adapt communication styles to enable collaborative and successful working relationships at all levels. In addition to leading on the strategic development of the LABC account ensuring their needs are met, the role will also be responsible for managing and coordinating the involvement of all key MD Group functional colleagues to ensure LABC are supported and their requirements met. Key Responsibilities Client Relationship Management: Accountable for the strategic development of LABC relationships working at senior and Board level to ensure alignment with key business objectives and that LABC needs are met Develop and maintain strong, trusted relationships with key decision-makers across the LABC matrix, ensuring high levels of customer satisfaction and loyalty. Accountable for the development and implementation of the LABC strategy that will enable the successful achievement of business and financial objectives and targets, and attain the desired financial growth in the identified target sectors Account Planning and Management: Develop strategic account plans, and execute sales strategies to drive revenue growth and expand the company's footprint within LABC Conduct regular business reviews, analyse client needs, and develop tailored solutions to meet LABC needs, ensuring alignment with the company's offerings and strategic objectives. Sales and Revenue Growth: Lead and develop the LABC Sales Team, so that productive and mutually beneficial relationships are engendered and strategically developed to maximise future business opportunities and maximise return on HSB Building Warranty's investment. Undertake regular performance appraisals with all reporting team members, identifying individual development needs of team members to ensure performance is addressed effectively and promptly Effectively coach and mentor the LABC sales team to a highly resourceful and experienced team that can deliver a high standard of service to LABC clients and customers. Ensure the CRM/Pipeline, commercial collateral is fully utilised and updated to accurately document profiles and contacts, detail potential future business opportunities and monitor progress and completion of business opportunities Ensure the team are always compliant with HSB Building Warranty business standards, processes and procedures and that revised procedures to meeting changing compliance requirements are effectively implemented Stakeholder Management: Build and maintain strong relationships with internal stakeholders, to ensure seamless delivery of our proposition to LABC. Ensure key business functions have clear understanding and objectives around the agreed delivery promises for LABC clients/customers. Head of LABCW Sales will conduct regular internal review meetings where our internal performance across all business functions is discussed against our commitments to LABC. Actions taken and monitored to improve our service delivery/proposition. Ensuring a team approach Is taken to the management of key LABC stakeholders. Engaging appropriate stakeholders directly with LABC and its clients to widen and deepen our relationship. Proposition Development and Market Insight: Working with Marketing, lead the development and ongoing refresh of a value proposition for LABC Delivering a proposition that makes it "Easy to do business with us" Strategically and continually review market trends and competitor activity to identify: opportunities which will maximize our market presence and provide sustainable financial profit monitor any threats within the market and interpret the potential impact on MD Groups service delivery and the LABC offering. Skills & Experience Strong sales and relationship management experience gained in relevant insurance environment. Strong strategic account management development capability Strong commercial awareness with demonstrable negotiation and influencing skills Ability to build and maintain strong client relationships Comprehensive understanding of insurance business processes Exceptional internal stakeholder management, Demonstrable coaching and mentoring experience Strategic and business planning experience Experience of high-level decision making Demonstrable management and leadership experience with ability to inspire and motivate team members to achieve exceptional results Excellent interpersonal and communication skills Qualifications and Educational Requirements: CII Level 3 Certificate in Insurance desirable Personal Attributes Confident and assertive, with a strong sense of self-awareness and emotional intelligence Demonstrated integrity and trustworthiness, with a proven track record of acting with transparency, honesty, ownership, and accountability Self-motivated with a proactive approach to problem-solving and decision-making Collaborative approach to business goals and team targets Pragmatic decision-maker with analytical and reasoning skills Resilience and adaptability, with the ability to navigate complex and ambiguous situations Diversity, Equity & Inclusion At HSB, Diversity, Equity, and Inclusion foster innovation and resilience and enable us to act braver and better. Embracing the power of DEI is at the core of who we are. We recognise diversity can be multi-dimensional, intersectional, and complex, so we want to build a diverse workforce that includes a wide range of racial, ethnic, sexual, and gender identities; economic and geographic backgrounds; physical abilities; ages; life, school, and career experiences; and political, religious, and personal beliefs. Additionally, we are committed to building an equitable and inclusive work environment where this diversity is celebrated, valued, and has equitable opportunities to succeed. All candidates in consideration for any role can request a reasonable adjustment at any point in our recruitment process. You can request an adjustment by speaking to your Talent Acquisition contact. Benefits 25 days Annual Leave + Bank Holidays + Well-being days 10% Employer Pension contribution, with the opportunity to join a salary sacrifice scheme Eligibility for an Annual Bonus Private Medical Insurance (PMI) Life Assurance (PHI) Hybrid Working available, with office in Birkenhead, Manchester and London
We are currently recruiting for an experienced Senior Structural Engineers to join a dynamic office based in Chorley. This role will suit candidates who have a strong background (minimum three years) in structural design within the UK market, particularly across residential and commercial buildings. Essential Requirements A minimum of three years' UK experience in structural design encompassing steelwork, reinforced concrete and masonry construction under Eurocodes. Proficiency with AutoCAD, Masterseries and TEDDS design software. Experience producing detailed structural calculations and sketches. Capability in preparing construction drawings and specifications. Commercial awareness with an understanding of costing, budgets and quotations. Demonstrated report writing ability. Willingness to conduct site visits to verify construction runs in compliance with drawings. Desirable Attributes Familiarity with STAAD.Pro, SCIA and Revit software. Project management and leadership skills. Aiming toward or already nearing Chartered Engineer status. What's On Offer £45,000 - £55,000 Pension scheme. Payment of annual professional fees. Death in Service benefit. Increased holiday entitlement for long service. Access to a wellbeing scheme (Paycare). If you meet these requirements and are ready to take the next step in your structural engineering career, please get in touch.
Feb 05, 2026
Full time
We are currently recruiting for an experienced Senior Structural Engineers to join a dynamic office based in Chorley. This role will suit candidates who have a strong background (minimum three years) in structural design within the UK market, particularly across residential and commercial buildings. Essential Requirements A minimum of three years' UK experience in structural design encompassing steelwork, reinforced concrete and masonry construction under Eurocodes. Proficiency with AutoCAD, Masterseries and TEDDS design software. Experience producing detailed structural calculations and sketches. Capability in preparing construction drawings and specifications. Commercial awareness with an understanding of costing, budgets and quotations. Demonstrated report writing ability. Willingness to conduct site visits to verify construction runs in compliance with drawings. Desirable Attributes Familiarity with STAAD.Pro, SCIA and Revit software. Project management and leadership skills. Aiming toward or already nearing Chartered Engineer status. What's On Offer £45,000 - £55,000 Pension scheme. Payment of annual professional fees. Death in Service benefit. Increased holiday entitlement for long service. Access to a wellbeing scheme (Paycare). If you meet these requirements and are ready to take the next step in your structural engineering career, please get in touch.
Contract Scotland
Maryhill, Comhairle Nan Eilean Siar
Are you an experienced Chartered Structural Engineer seeking a senior position with real influence? We re partnering with a respected Glasgow-based consultancy looking to appoint an accomplished engineer to lead and manage the technical delivery of their varied and challenging building projects. This is a key senior appointment offering the opportunity to take ownership of project delivery, mentor engineers, and contribute to the continued growth and reputation of an established consultancy. You ll work across a variety of building projects, providing high-level technical leadership, coordination and oversight. Key Responsibilities: Lead and manage the technical delivery of structural engineering projects Provide expert design input across a broad range of building structures Oversee project teams, mentor junior engineers and support technical development Liaise directly with clients, design teams and stakeholders Ensure delivery to programme, quality and regulatory standards Contribute to project planning, resource management and best practice processes They are looking for someone who: Chartered Structural Engineer (IStructE or ICE) Minimum 12 years experience within the building structures sector Strong track record in leading the technical delivery of projects Excellent communication and leadership skills SER Certifier status is highly advantageous (or the ability/interest to work towards it) With a competitive salary, company benefits and job security this is a great opportunity for someone to join their team. If this is of interest to you then please apply now or call Marie on (phone number removed) quoting J46454 for a confidential chat. Legal Information: We act as an employment agency for permanent work and as an employment business for temporary work. For roles in the UK, applicants must be eligible to live and work in the UK. We value diversity and promote equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all areas of society and can discuss any reasonable adjustments to support your application.
Feb 05, 2026
Full time
Are you an experienced Chartered Structural Engineer seeking a senior position with real influence? We re partnering with a respected Glasgow-based consultancy looking to appoint an accomplished engineer to lead and manage the technical delivery of their varied and challenging building projects. This is a key senior appointment offering the opportunity to take ownership of project delivery, mentor engineers, and contribute to the continued growth and reputation of an established consultancy. You ll work across a variety of building projects, providing high-level technical leadership, coordination and oversight. Key Responsibilities: Lead and manage the technical delivery of structural engineering projects Provide expert design input across a broad range of building structures Oversee project teams, mentor junior engineers and support technical development Liaise directly with clients, design teams and stakeholders Ensure delivery to programme, quality and regulatory standards Contribute to project planning, resource management and best practice processes They are looking for someone who: Chartered Structural Engineer (IStructE or ICE) Minimum 12 years experience within the building structures sector Strong track record in leading the technical delivery of projects Excellent communication and leadership skills SER Certifier status is highly advantageous (or the ability/interest to work towards it) With a competitive salary, company benefits and job security this is a great opportunity for someone to join their team. If this is of interest to you then please apply now or call Marie on (phone number removed) quoting J46454 for a confidential chat. Legal Information: We act as an employment agency for permanent work and as an employment business for temporary work. For roles in the UK, applicants must be eligible to live and work in the UK. We value diversity and promote equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all areas of society and can discuss any reasonable adjustments to support your application.
Senior Quantity SurveyorLeeds, London, Birmingham, Hybrid Permanent - Full Time Competitive (DOE) + Car/ Car Allowance & Flexible Benefits Summary : Freedom's Professional Services team are looking for a Senior Quantity Surveyor to be based on flexible Hybrid working Home, London or Leeds. Reporting into the Commercial Manager, this role will support the business unit by managing the contractual and financial elements of tenders and projects undertaken within the unit. In addition, the role will include all other activities to enable successful P&L, cash flow and being responsible for the Commercial performance of several frameworks. Providing commercial support and advice to Work Winning and other functions as required. Support the Commercial Manager in preparing the regional management accounts and contributing to Contract Reviews. Some of the key deliverables in this role will include: Contract management of multiple contracts under NEC3/4, JCT & bespoke contract Proficient in taking off quantities and producing detailed SMM7 Measured Bills using BQ software Measurement and valuations of works for applications, variations and final accounts with both clients and suppliers. Identification & notification of Early Warnings and Compensation Events Ensure all contracts, up and down supply chain, are appropriate and robust Provide Cash Flow Forecasts CVR creation and management Establishment and chair of monthly project reviews Managing the dispute and defects process with the Client and Subcontractors Attend Client progress meetings. Follow procedures for Client work approval Manage invoicing and debts Effective communication with all levels of personnel Supply chain management. Provide innovative ideas and continuous improvement Supporting development of the wider commercial team across Freedom's Network Services business. Does this sound like a role you have envisaged yourself in? What we're looking for: Previous experience in a Senior Quantity Surveyor or similar role - Essential A well-developed understanding of various forms of contract, in particular NEC3/4, with the ability to apply these skills in a practical fashion to live projects - Essential. Experienced in managing the delivery of client services covering a range of civil and structural projects in the power sector, and/or HV electrical projects - Desirable Experience and knowledge of the Transmission and Distribution marketplace, or other relevant Energy sectors - Desirable Experience and knowledge of working within our key client sector markets Why Join Us? At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: Pension with up to 8% employer contribution Private Medical Insurance Personal Wellbeing and Volunteer Days Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle) Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes) Ongoing Training & Development Programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
Feb 05, 2026
Full time
Senior Quantity SurveyorLeeds, London, Birmingham, Hybrid Permanent - Full Time Competitive (DOE) + Car/ Car Allowance & Flexible Benefits Summary : Freedom's Professional Services team are looking for a Senior Quantity Surveyor to be based on flexible Hybrid working Home, London or Leeds. Reporting into the Commercial Manager, this role will support the business unit by managing the contractual and financial elements of tenders and projects undertaken within the unit. In addition, the role will include all other activities to enable successful P&L, cash flow and being responsible for the Commercial performance of several frameworks. Providing commercial support and advice to Work Winning and other functions as required. Support the Commercial Manager in preparing the regional management accounts and contributing to Contract Reviews. Some of the key deliverables in this role will include: Contract management of multiple contracts under NEC3/4, JCT & bespoke contract Proficient in taking off quantities and producing detailed SMM7 Measured Bills using BQ software Measurement and valuations of works for applications, variations and final accounts with both clients and suppliers. Identification & notification of Early Warnings and Compensation Events Ensure all contracts, up and down supply chain, are appropriate and robust Provide Cash Flow Forecasts CVR creation and management Establishment and chair of monthly project reviews Managing the dispute and defects process with the Client and Subcontractors Attend Client progress meetings. Follow procedures for Client work approval Manage invoicing and debts Effective communication with all levels of personnel Supply chain management. Provide innovative ideas and continuous improvement Supporting development of the wider commercial team across Freedom's Network Services business. Does this sound like a role you have envisaged yourself in? What we're looking for: Previous experience in a Senior Quantity Surveyor or similar role - Essential A well-developed understanding of various forms of contract, in particular NEC3/4, with the ability to apply these skills in a practical fashion to live projects - Essential. Experienced in managing the delivery of client services covering a range of civil and structural projects in the power sector, and/or HV electrical projects - Desirable Experience and knowledge of the Transmission and Distribution marketplace, or other relevant Energy sectors - Desirable Experience and knowledge of working within our key client sector markets Why Join Us? At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: Pension with up to 8% employer contribution Private Medical Insurance Personal Wellbeing and Volunteer Days Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle) Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes) Ongoing Training & Development Programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
Senior Quantity SurveyorLeeds, London, Birmingham, Hybrid Permanent - Full Time Competitive (DOE) + Car/ Car Allowance & Flexible Benefits Summary : Freedom's Professional Services team are looking for a Senior Quantity Surveyor to be based on flexible Hybrid working Home, London or Leeds. Reporting into the Commercial Manager, this role will support the business unit by managing the contractual and financial elements of tenders and projects undertaken within the unit. In addition, the role will include all other activities to enable successful P&L, cash flow and being responsible for the Commercial performance of several frameworks. Providing commercial support and advice to Work Winning and other functions as required. Support the Commercial Manager in preparing the regional management accounts and contributing to Contract Reviews. Some of the key deliverables in this role will include: Contract management of multiple contracts under NEC3/4, JCT & bespoke contract Proficient in taking off quantities and producing detailed SMM7 Measured Bills using BQ software Measurement and valuations of works for applications, variations and final accounts with both clients and suppliers. Identification & notification of Early Warnings and Compensation Events Ensure all contracts, up and down supply chain, are appropriate and robust Provide Cash Flow Forecasts CVR creation and management Establishment and chair of monthly project reviews Managing the dispute and defects process with the Client and Subcontractors Attend Client progress meetings. Follow procedures for Client work approval Manage invoicing and debts Effective communication with all levels of personnel Supply chain management. Provide innovative ideas and continuous improvement Supporting development of the wider commercial team across Freedom's Network Services business. Does this sound like a role you have envisaged yourself in? What we're looking for: Previous experience in a Senior Quantity Surveyor or similar role - Essential A well-developed understanding of various forms of contract, in particular NEC3/4, with the ability to apply these skills in a practical fashion to live projects - Essential. Experienced in managing the delivery of client services covering a range of civil and structural projects in the power sector, and/or HV electrical projects - Desirable Experience and knowledge of the Transmission and Distribution marketplace, or other relevant Energy sectors - Desirable Experience and knowledge of working within our key client sector markets Why Join Us? At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: Pension with up to 8% employer contribution Private Medical Insurance Personal Wellbeing and Volunteer Days Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle) Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes) Ongoing Training & Development Programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
Feb 05, 2026
Full time
Senior Quantity SurveyorLeeds, London, Birmingham, Hybrid Permanent - Full Time Competitive (DOE) + Car/ Car Allowance & Flexible Benefits Summary : Freedom's Professional Services team are looking for a Senior Quantity Surveyor to be based on flexible Hybrid working Home, London or Leeds. Reporting into the Commercial Manager, this role will support the business unit by managing the contractual and financial elements of tenders and projects undertaken within the unit. In addition, the role will include all other activities to enable successful P&L, cash flow and being responsible for the Commercial performance of several frameworks. Providing commercial support and advice to Work Winning and other functions as required. Support the Commercial Manager in preparing the regional management accounts and contributing to Contract Reviews. Some of the key deliverables in this role will include: Contract management of multiple contracts under NEC3/4, JCT & bespoke contract Proficient in taking off quantities and producing detailed SMM7 Measured Bills using BQ software Measurement and valuations of works for applications, variations and final accounts with both clients and suppliers. Identification & notification of Early Warnings and Compensation Events Ensure all contracts, up and down supply chain, are appropriate and robust Provide Cash Flow Forecasts CVR creation and management Establishment and chair of monthly project reviews Managing the dispute and defects process with the Client and Subcontractors Attend Client progress meetings. Follow procedures for Client work approval Manage invoicing and debts Effective communication with all levels of personnel Supply chain management. Provide innovative ideas and continuous improvement Supporting development of the wider commercial team across Freedom's Network Services business. Does this sound like a role you have envisaged yourself in? What we're looking for: Previous experience in a Senior Quantity Surveyor or similar role - Essential A well-developed understanding of various forms of contract, in particular NEC3/4, with the ability to apply these skills in a practical fashion to live projects - Essential. Experienced in managing the delivery of client services covering a range of civil and structural projects in the power sector, and/or HV electrical projects - Desirable Experience and knowledge of the Transmission and Distribution marketplace, or other relevant Energy sectors - Desirable Experience and knowledge of working within our key client sector markets Why Join Us? At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: Pension with up to 8% employer contribution Private Medical Insurance Personal Wellbeing and Volunteer Days Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle) Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes) Ongoing Training & Development Programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
