Principal Firmware Engineer Edinburgh 12-month contract Paying up to £75p/h (inside IR35) The Opportunity We are seeking a Senior or Principal Firmware Engineer to join a high-performing engineering team delivering advanced digital systems within the Aerospace, Defence, and Security sector. At Senior or Principal level, you will also provide technical leadership, supporting the delivery of work across multiple engineers while contributing to process improvement and best practice development across FPGA/Firmware teams. Key Responsibilities Design and develop innovative VHDL-based FPGA architectures Apply advanced verification techniques using VHDL or SystemVerilog / UVM Work with currentFPGA technologies from: Xilinx Intel (Altera) Microsemi (semiconductor manufacturer) Develop and integrate high-speed interfaces, including PCIe, DDR3, Ethernet and JESD Analyse system-level documentation to derive detailed firmware requirements Adopt a structured, methodical approach to the full firmware lifecycle, ideally aligned with standards such as RTCA DO-254 or similar Specify complex timing and area constraints for efficient FPGA place and route Debug firmware designs and support system verification and integration activities Contribute to process enhancements and ways of working across engineering teams Communicate effectively within multidisciplinary teams and stakeholders Essential Skills & Experience Considerable experience designing firmware architecture using FPGA technologies Strong hands-on experience with Xilinx, Intel (Altera), or Microsemi toolchains Experience with fast interfaces such as PCIe, Ethernet, DDR3, JESD Advanced verification experience using VHDL or System Verilog / UVM Proven ability to derive detailed firmware requirements from system-level specifications Experience working within structured firmware processes (e.g., DO-254) Excellent analytical and problem-solving capability Strong communication skills and a collaborative working style Desirable Familiarity with Model-Based Engineering using: MATLAB Simulink Experience leading or mentoring engineers (for Principal level) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Mar 19, 2026
Contractor
Principal Firmware Engineer Edinburgh 12-month contract Paying up to £75p/h (inside IR35) The Opportunity We are seeking a Senior or Principal Firmware Engineer to join a high-performing engineering team delivering advanced digital systems within the Aerospace, Defence, and Security sector. At Senior or Principal level, you will also provide technical leadership, supporting the delivery of work across multiple engineers while contributing to process improvement and best practice development across FPGA/Firmware teams. Key Responsibilities Design and develop innovative VHDL-based FPGA architectures Apply advanced verification techniques using VHDL or SystemVerilog / UVM Work with currentFPGA technologies from: Xilinx Intel (Altera) Microsemi (semiconductor manufacturer) Develop and integrate high-speed interfaces, including PCIe, DDR3, Ethernet and JESD Analyse system-level documentation to derive detailed firmware requirements Adopt a structured, methodical approach to the full firmware lifecycle, ideally aligned with standards such as RTCA DO-254 or similar Specify complex timing and area constraints for efficient FPGA place and route Debug firmware designs and support system verification and integration activities Contribute to process enhancements and ways of working across engineering teams Communicate effectively within multidisciplinary teams and stakeholders Essential Skills & Experience Considerable experience designing firmware architecture using FPGA technologies Strong hands-on experience with Xilinx, Intel (Altera), or Microsemi toolchains Experience with fast interfaces such as PCIe, Ethernet, DDR3, JESD Advanced verification experience using VHDL or System Verilog / UVM Proven ability to derive detailed firmware requirements from system-level specifications Experience working within structured firmware processes (e.g., DO-254) Excellent analytical and problem-solving capability Strong communication skills and a collaborative working style Desirable Familiarity with Model-Based Engineering using: MATLAB Simulink Experience leading or mentoring engineers (for Principal level) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Systems Lead for Defence Programme's Overview We're recruiting a Systems Lead to join a major defence programme within a secure cyber environment. This is a senior Systems Engineering position with responsibility for leading delivery across a programme and multiple projects, ensuring robust lifecycle governance, technical coherence, and high-quality evidence to support acceptance. The Role You'll be accountable for assuring the application of ISO 15288 Systems Engineering processes across the full lifecycle, owning the technical solution aligned to customer requirements, and providing technical direction across architecture, design, implementation, risk and verification activities. Key Responsibilities Lead Systems Engineering activity across a programme/projects, owning Systems work packages and ensuring delivery to agreed plans, quality, schedule and budget . Support programme leadership with delegated engineering management responsibilities. Provide technical direction and influence across requirements, architecture, design trade-offs, risk mitigation and implementation approach . Work closely with systems, hardware, firmware and software architects/design authorities to ensure consistency and technical excellence. Plan and lead technical/design reviews with senior stakeholders and customers. Manage technical balance between requirements, solution maturity, risk, schedule and cost . Engage with customers and suppliers to define expectations and drive technical acceptance. Support bids/proposals through effort/cost/risk estimation and technical input where required. Mentor and coach engineers/discipline leads and contribute to capability improvement across the wider systems function. Ensure information is handled in accordance with security policies and relevant government regulations. Essential Skills & Experience Degree (or equivalent) in Engineering, Mathematics or Physics, or significant Defence/Aerospace industry experience. Strong Systems Engineering background across the full lifecycle (including System-of-Systems / capability delivery experience). Significant requirements experience (producing high-quality requirements and compliant solutions). Demonstrable experience applying engineering standards/practices aligned to ISO/IEEE/IEC frameworks. Technical leadership and line management experience leading Systems engineers across programmes/projects. Excellent technical documentation skills and experience participating in formal technical reviews. Background in hands-on delivery of hardware, software or firmware embedded solutions. Desirable INCOSE accreditation (ASEP/CSEP/ESEP) Familiarity with NCSC security processes and delivery of associated security artefacts Experience acting as an SME and developing new technical depth as required Clearance's: Due to the nature of the work, candidates must be able to obtain and maintain UK Security Clearance
Mar 18, 2026
Full time
Systems Lead for Defence Programme's Overview We're recruiting a Systems Lead to join a major defence programme within a secure cyber environment. This is a senior Systems Engineering position with responsibility for leading delivery across a programme and multiple projects, ensuring robust lifecycle governance, technical coherence, and high-quality evidence to support acceptance. The Role You'll be accountable for assuring the application of ISO 15288 Systems Engineering processes across the full lifecycle, owning the technical solution aligned to customer requirements, and providing technical direction across architecture, design, implementation, risk and verification activities. Key Responsibilities Lead Systems Engineering activity across a programme/projects, owning Systems work packages and ensuring delivery to agreed plans, quality, schedule and budget . Support programme leadership with delegated engineering management responsibilities. Provide technical direction and influence across requirements, architecture, design trade-offs, risk mitigation and implementation approach . Work closely with systems, hardware, firmware and software architects/design authorities to ensure consistency and technical excellence. Plan and lead technical/design reviews with senior stakeholders and customers. Manage technical balance between requirements, solution maturity, risk, schedule and cost . Engage with customers and suppliers to define expectations and drive technical acceptance. Support bids/proposals through effort/cost/risk estimation and technical input where required. Mentor and coach engineers/discipline leads and contribute to capability improvement across the wider systems function. Ensure information is handled in accordance with security policies and relevant government regulations. Essential Skills & Experience Degree (or equivalent) in Engineering, Mathematics or Physics, or significant Defence/Aerospace industry experience. Strong Systems Engineering background across the full lifecycle (including System-of-Systems / capability delivery experience). Significant requirements experience (producing high-quality requirements and compliant solutions). Demonstrable experience applying engineering standards/practices aligned to ISO/IEEE/IEC frameworks. Technical leadership and line management experience leading Systems engineers across programmes/projects. Excellent technical documentation skills and experience participating in formal technical reviews. Background in hands-on delivery of hardware, software or firmware embedded solutions. Desirable INCOSE accreditation (ASEP/CSEP/ESEP) Familiarity with NCSC security processes and delivery of associated security artefacts Experience acting as an SME and developing new technical depth as required Clearance's: Due to the nature of the work, candidates must be able to obtain and maintain UK Security Clearance
Systems Lead for Defence Programme's Overview We're recruiting a Systems Lead to join a major defence programme within a secure cyber environment. This is a senior Systems Engineering position with responsibility for leading delivery across a programme and multiple projects, ensuring robust lifecycle governance, technical coherence, and high-quality evidence to support acceptance. The Role You'll be accountable for assuring the application of ISO 15288 Systems Engineering processes across the full lifecycle, owning the technical solution aligned to customer requirements, and providing technical direction across architecture, design, implementation, risk and verification activities. Key Responsibilities Lead Systems Engineering activity across a programme/projects, owning Systems work packages and ensuring delivery to agreed plans, quality, schedule and budget . Support programme leadership with delegated engineering management responsibilities. Provide technical direction and influence across requirements, architecture, design trade-offs, risk mitigation and implementation approach . Work closely with systems, hardware, firmware and software architects/design authorities to ensure consistency and technical excellence. Plan and lead technical/design reviews with senior stakeholders and customers. Manage technical balance between requirements, solution maturity, risk, schedule and cost . Engage with customers and suppliers to define expectations and drive technical acceptance. Support bids/proposals through effort/cost/risk estimation and technical input where required. Mentor and coach engineers/discipline leads and contribute to capability improvement across the wider systems function. Ensure information is handled in accordance with security policies and relevant government regulations. Essential Skills & Experience Degree (or equivalent) in Engineering, Mathematics or Physics, or significant Defence/Aerospace industry experience. Strong Systems Engineering background across the full lifecycle (including System-of-Systems / capability delivery experience). Significant requirements experience (producing high-quality requirements and compliant solutions). Demonstrable experience applying engineering standards/practices aligned to ISO/IEEE/IEC frameworks. Technical leadership and line management experience leading Systems engineers across programmes/projects. Excellent technical documentation skills and experience participating in formal technical reviews. Background in hands-on delivery of hardware, software or firmware embedded solutions. Desirable INCOSE accreditation (ASEP/CSEP/ESEP) Familiarity with NCSC security processes and delivery of associated security artefacts Experience acting as an SME and developing new technical depth as required Clearance's: Due to the nature of the work, candidates must be able to obtain and maintain UK Security Clearance
Mar 18, 2026
Full time
Systems Lead for Defence Programme's Overview We're recruiting a Systems Lead to join a major defence programme within a secure cyber environment. This is a senior Systems Engineering position with responsibility for leading delivery across a programme and multiple projects, ensuring robust lifecycle governance, technical coherence, and high-quality evidence to support acceptance. The Role You'll be accountable for assuring the application of ISO 15288 Systems Engineering processes across the full lifecycle, owning the technical solution aligned to customer requirements, and providing technical direction across architecture, design, implementation, risk and verification activities. Key Responsibilities Lead Systems Engineering activity across a programme/projects, owning Systems work packages and ensuring delivery to agreed plans, quality, schedule and budget . Support programme leadership with delegated engineering management responsibilities. Provide technical direction and influence across requirements, architecture, design trade-offs, risk mitigation and implementation approach . Work closely with systems, hardware, firmware and software architects/design authorities to ensure consistency and technical excellence. Plan and lead technical/design reviews with senior stakeholders and customers. Manage technical balance between requirements, solution maturity, risk, schedule and cost . Engage with customers and suppliers to define expectations and drive technical acceptance. Support bids/proposals through effort/cost/risk estimation and technical input where required. Mentor and coach engineers/discipline leads and contribute to capability improvement across the wider systems function. Ensure information is handled in accordance with security policies and relevant government regulations. Essential Skills & Experience Degree (or equivalent) in Engineering, Mathematics or Physics, or significant Defence/Aerospace industry experience. Strong Systems Engineering background across the full lifecycle (including System-of-Systems / capability delivery experience). Significant requirements experience (producing high-quality requirements and compliant solutions). Demonstrable experience applying engineering standards/practices aligned to ISO/IEEE/IEC frameworks. Technical leadership and line management experience leading Systems engineers across programmes/projects. Excellent technical documentation skills and experience participating in formal technical reviews. Background in hands-on delivery of hardware, software or firmware embedded solutions. Desirable INCOSE accreditation (ASEP/CSEP/ESEP) Familiarity with NCSC security processes and delivery of associated security artefacts Experience acting as an SME and developing new technical depth as required Clearance's: Due to the nature of the work, candidates must be able to obtain and maintain UK Security Clearance
Principal Digital Electronics Engineer 12 months 84.55 per hour (inside IR35) Hybrid working About the Opportunity We are seeking a Principal Digital Electronics Engineer to help deliver advanced electronic solutions across some of the most complex and high-profile defence and security programmes in the UK. This is a technical leadership role where you will shape digital hardware architectures, influence system-level design decisions, and mentor engineers across the full product lifecycle - from concept through to production and in-service support. What You'll Be Doing Lead the architecture, design and development of complex digital electronic systems Define and review FPGA, SoC, and high-speed digital designs Oversee requirements capture, design documentation, and verification strategies Provide technical authority and governance across multiple projects Support system integration, validation, and qualification activities Collaborate with systems, software, firmware, mechanical and safety teams Engage with customers and suppliers at a technical level Mentor and develop senior and junior engineers Drive continuous improvement in engineering processes and standards Your Skills & Experience Essential: Extensive experience in digital electronics design Strong background in FPGA/ASIC development (VHDL/Verilog/SystemVerilog) Experience with high-speed interfaces (e.g., PCIe, Ethernet, DDR, SERDES) Proven ability to lead technical teams or large work packages Experience with requirements management and verification methodologies Understanding of signal integrity, timing analysis, and hardware debugging Degree (or equivalent experience) in Electronic Engineering or related discipline Desirable: Experience in safety-critical or regulated industries Knowledge of secure or resilient system design Familiarity with DOORS, MATLAB, or similar tools Chartered Engineer status (or working towards)
Mar 18, 2026
Contractor
Principal Digital Electronics Engineer 12 months 84.55 per hour (inside IR35) Hybrid working About the Opportunity We are seeking a Principal Digital Electronics Engineer to help deliver advanced electronic solutions across some of the most complex and high-profile defence and security programmes in the UK. This is a technical leadership role where you will shape digital hardware architectures, influence system-level design decisions, and mentor engineers across the full product lifecycle - from concept through to production and in-service support. What You'll Be Doing Lead the architecture, design and development of complex digital electronic systems Define and review FPGA, SoC, and high-speed digital designs Oversee requirements capture, design documentation, and verification strategies Provide technical authority and governance across multiple projects Support system integration, validation, and qualification activities Collaborate with systems, software, firmware, mechanical and safety teams Engage with customers and suppliers at a technical level Mentor and develop senior and junior engineers Drive continuous improvement in engineering processes and standards Your Skills & Experience Essential: Extensive experience in digital electronics design Strong background in FPGA/ASIC development (VHDL/Verilog/SystemVerilog) Experience with high-speed interfaces (e.g., PCIe, Ethernet, DDR, SERDES) Proven ability to lead technical teams or large work packages Experience with requirements management and verification methodologies Understanding of signal integrity, timing analysis, and hardware debugging Degree (or equivalent experience) in Electronic Engineering or related discipline Desirable: Experience in safety-critical or regulated industries Knowledge of secure or resilient system design Familiarity with DOORS, MATLAB, or similar tools Chartered Engineer status (or working towards)
Principal Digital Electronics Engineer 12 months 84.55 per hour (inside IR35) Hybrid working (Portsmouth) About the Opportunity We are seeking a Principal Digital Electronics Engineer to help deliver advanced electronic solutions across some of the most complex and high-profile defence and security programmes in the UK. This is a technical leadership role where you will shape digital hardware architectures, influence system-level design decisions, and mentor engineers across the full product lifecycle - from concept through to production and in-service support. What You'll Be Doing Lead the architecture, design and development of complex digital electronic systems Define and review FPGA, SoC, and high-speed digital designs Oversee requirements capture, design documentation, and verification strategies Provide technical authority and governance across multiple projects Support system integration, validation, and qualification activities Collaborate with systems, software, firmware, mechanical and safety teams Engage with customers and suppliers at a technical level Mentor and develop senior and junior engineers Drive continuous improvement in engineering processes and standards Your Skills & Experience Essential: Extensive experience in digital electronics design Strong background in FPGA/ASIC development (VHDL/Verilog/SystemVerilog) Experience with high-speed interfaces (e.g., PCIe, Ethernet, DDR, SERDES) Proven ability to lead technical teams or large work packages Experience with requirements management and verification methodologies Understanding of signal integrity, timing analysis, and hardware debugging Degree (or equivalent experience) in Electronic Engineering or related discipline Desirable: Experience in safety-critical or regulated industries Knowledge of secure or resilient system design Familiarity with DOORS, MATLAB, or similar tools Chartered Engineer status (or working towards)
Mar 18, 2026
Contractor
Principal Digital Electronics Engineer 12 months 84.55 per hour (inside IR35) Hybrid working (Portsmouth) About the Opportunity We are seeking a Principal Digital Electronics Engineer to help deliver advanced electronic solutions across some of the most complex and high-profile defence and security programmes in the UK. This is a technical leadership role where you will shape digital hardware architectures, influence system-level design decisions, and mentor engineers across the full product lifecycle - from concept through to production and in-service support. What You'll Be Doing Lead the architecture, design and development of complex digital electronic systems Define and review FPGA, SoC, and high-speed digital designs Oversee requirements capture, design documentation, and verification strategies Provide technical authority and governance across multiple projects Support system integration, validation, and qualification activities Collaborate with systems, software, firmware, mechanical and safety teams Engage with customers and suppliers at a technical level Mentor and develop senior and junior engineers Drive continuous improvement in engineering processes and standards Your Skills & Experience Essential: Extensive experience in digital electronics design Strong background in FPGA/ASIC development (VHDL/Verilog/SystemVerilog) Experience with high-speed interfaces (e.g., PCIe, Ethernet, DDR, SERDES) Proven ability to lead technical teams or large work packages Experience with requirements management and verification methodologies Understanding of signal integrity, timing analysis, and hardware debugging Degree (or equivalent experience) in Electronic Engineering or related discipline Desirable: Experience in safety-critical or regulated industries Knowledge of secure or resilient system design Familiarity with DOORS, MATLAB, or similar tools Chartered Engineer status (or working towards)
Senior Embedded Software Engineer (C/C++, STM32, FreeRTOS) Location: Derbyshire (On-site / Remote work available) Salary: £55,000 - £70,000 + Benefits Overview An exciting opportunity has arisen for a Senior Embedded Software Engineer to design, develop, test and integrate embedded control systems for advanced industrial applications. This role is ideal for an experienced engineer with strong C/C++ embedded development skills, looking to work on real-time systems (RTOS) and ARM Cortex-M microcontrollers (STM32) within a collaborative, multi-disciplinary engineering environment. You will work closely with electrical, mechanical and systems engineering teams to deliver robust, safety-critical and cost-effective embedded software solutions for global customers. Key Responsibilities Translate system and customer requirements into detailed software specifications and acceptance criteria Design and develop embedded software architecture for ARM-based microcontrollers (STM32) Develop, test and integrate embedded C/C++ firmware for real-time control systems Work with FreeRTOS (or similar RTOS) including task scheduling, inter-task communication and debugging Implement and optimise communication protocols including Modbus/TCP, CAN, RS232/RS422/RS485 and Ethernet (TCP/UDP) Interface with analogue and digital hardware (ADCs, DACs, sensors and actuators) Perform unit testing, static code analysis, code coverage and peer reviews to ensure high-quality software Develop and maintain HIL/SIL test environments Produce clear technical documentation including specifications, architecture diagrams, and test plans Use Git (version control) within a trunk-based development environment with semantic versioning Support manufacturing, commissioning and field service teams with troubleshooting and issue resolution Drive continuous improvement in software processes, tools and engineering standards Skills & Experience Required Proven experience in embedded software development or industrial control systems Strong programming skills in C and/or C++ for embedded systems Experience with ARM Cortex-M microcontrollers (STM32 preferred) Solid understanding of real-time operating systems (FreeRTOS or similar) Knowledge of functional safety and coding standards (MISRA C:2012, IEC 61508, CERT-C) Experience with unit testing frameworks (e.g. Unity, Ceedling), static analysis tools and code coverage Strong experience with Git version control and modern development workflows Knowledge of industrial communication protocols (Modbus, CAN, Ethernet) Experience integrating embedded systems with sensors and hardware interfaces Excellent problem-solving skills, teamwork and communication abilities Desirable Skills Experience with Python or MATLAB for automation, testing or data analysis Ability to read and interpret electrical and mechanical engineering drawings Experience working in safety-critical or regulated industries
Mar 17, 2026
Full time
Senior Embedded Software Engineer (C/C++, STM32, FreeRTOS) Location: Derbyshire (On-site / Remote work available) Salary: £55,000 - £70,000 + Benefits Overview An exciting opportunity has arisen for a Senior Embedded Software Engineer to design, develop, test and integrate embedded control systems for advanced industrial applications. This role is ideal for an experienced engineer with strong C/C++ embedded development skills, looking to work on real-time systems (RTOS) and ARM Cortex-M microcontrollers (STM32) within a collaborative, multi-disciplinary engineering environment. You will work closely with electrical, mechanical and systems engineering teams to deliver robust, safety-critical and cost-effective embedded software solutions for global customers. Key Responsibilities Translate system and customer requirements into detailed software specifications and acceptance criteria Design and develop embedded software architecture for ARM-based microcontrollers (STM32) Develop, test and integrate embedded C/C++ firmware for real-time control systems Work with FreeRTOS (or similar RTOS) including task scheduling, inter-task communication and debugging Implement and optimise communication protocols including Modbus/TCP, CAN, RS232/RS422/RS485 and Ethernet (TCP/UDP) Interface with analogue and digital hardware (ADCs, DACs, sensors and actuators) Perform unit testing, static code analysis, code coverage and peer reviews to ensure high-quality software Develop and maintain HIL/SIL test environments Produce clear technical documentation including specifications, architecture diagrams, and test plans Use Git (version control) within a trunk-based development environment with semantic versioning Support manufacturing, commissioning and field service teams with troubleshooting and issue resolution Drive continuous improvement in software processes, tools and engineering standards Skills & Experience Required Proven experience in embedded software development or industrial control systems Strong programming skills in C and/or C++ for embedded systems Experience with ARM Cortex-M microcontrollers (STM32 preferred) Solid understanding of real-time operating systems (FreeRTOS or similar) Knowledge of functional safety and coding standards (MISRA C:2012, IEC 61508, CERT-C) Experience with unit testing frameworks (e.g. Unity, Ceedling), static analysis tools and code coverage Strong experience with Git version control and modern development workflows Knowledge of industrial communication protocols (Modbus, CAN, Ethernet) Experience integrating embedded systems with sensors and hardware interfaces Excellent problem-solving skills, teamwork and communication abilities Desirable Skills Experience with Python or MATLAB for automation, testing or data analysis Ability to read and interpret electrical and mechanical engineering drawings Experience working in safety-critical or regulated industries
What you will do As a Senior Firmware Engineer, you will aid in the design, development, and maintenance of embedded firmware across a range of CEM Systems hardware platforms. You will work closely with hardware, software, and systems teams to deliver reliable, secure, and high-performance solutions used globally in critical infrastructure, airports, data centres, and enterprise environments click apply for full job details
Mar 17, 2026
Full time
What you will do As a Senior Firmware Engineer, you will aid in the design, development, and maintenance of embedded firmware across a range of CEM Systems hardware platforms. You will work closely with hardware, software, and systems teams to deliver reliable, secure, and high-performance solutions used globally in critical infrastructure, airports, data centres, and enterprise environments click apply for full job details
Security Clearance: British-born Project Overview Copello are supporting a leading Defence company in their search for a Senior Embedded Software Engineer. They are delivering a high-profile, business-critical programme that has been running for the past year and has strong potential to transform the organisation. The project team consists of 25 multi-disciplinary engineers across software, systems, electronics and firmware. The focus is on developing advanced products that protect GPS systems against jamming. The product is currently at advanced prototype stage, with significant work required to transition from prototype to full production and real-world deployment. The Role We are seeking a Embedded Software Engineer to join the team. Key Responsibilities Technical Leadership Provide embedded software expertise within an ARM-based environment. Lead architecture, design and development activities across complex embedded systems. Work with trusted frameworks and contribute to robust, production-ready system architecture. Remain technically hands-on while guiding best practice and engineering standards. Coordinate software activities across the wider 25-person multi-disciplinary engineering team. Drive delivery from prototype maturity through to production deployment. Cross-Functional Collaboration Work closely with the System Design Authority. Collaborate with electronics and firmware engineering peers. Engage with the Head Engineer from another business unit to ensure alignment and integration. Essential Experience Strong experience with ARM-based processors. Proven experience working with STMicroelectronics devices. Background in complex systems architecture and trusted frameworks. Experience delivering embedded products from development through to production. Candidate Profile Senior-level, dynamic and driven individual capable of energising and leading a team. Strong stakeholder engagement and communication skills. Comfortable operating in a highly critical, high-impact environment. Experience within smaller businesses preferred. British-born (requirement as specified).
Mar 17, 2026
Full time
Security Clearance: British-born Project Overview Copello are supporting a leading Defence company in their search for a Senior Embedded Software Engineer. They are delivering a high-profile, business-critical programme that has been running for the past year and has strong potential to transform the organisation. The project team consists of 25 multi-disciplinary engineers across software, systems, electronics and firmware. The focus is on developing advanced products that protect GPS systems against jamming. The product is currently at advanced prototype stage, with significant work required to transition from prototype to full production and real-world deployment. The Role We are seeking a Embedded Software Engineer to join the team. Key Responsibilities Technical Leadership Provide embedded software expertise within an ARM-based environment. Lead architecture, design and development activities across complex embedded systems. Work with trusted frameworks and contribute to robust, production-ready system architecture. Remain technically hands-on while guiding best practice and engineering standards. Coordinate software activities across the wider 25-person multi-disciplinary engineering team. Drive delivery from prototype maturity through to production deployment. Cross-Functional Collaboration Work closely with the System Design Authority. Collaborate with electronics and firmware engineering peers. Engage with the Head Engineer from another business unit to ensure alignment and integration. Essential Experience Strong experience with ARM-based processors. Proven experience working with STMicroelectronics devices. Background in complex systems architecture and trusted frameworks. Experience delivering embedded products from development through to production. Candidate Profile Senior-level, dynamic and driven individual capable of energising and leading a team. Strong stakeholder engagement and communication skills. Comfortable operating in a highly critical, high-impact environment. Experience within smaller businesses preferred. British-born (requirement as specified).
Contract Firmware/FPGA Engineer Bristol or Edinburgh based (4 days a week and One day remote) Defence/Aerospace sector - SC Clearance is essential Up to £75 p/h - 12-month contract A leading Defence prime are looking for an experienced Firmware Engineer to join an expanding Engineering team that are responsible for delivering complex digital systems to meet demanding future customer requirements. Key skills Extensive FPGA/Firmware design experience in complex systems Advanced verification capability Experience with modern FPGA toolchains Structured life cycle experience (DO-254 or comparable highly desirable) Ability to influence processes and improve ways of working What You'll Be Doing Designing innovative VHDL-based FPGA architectures Applying advanced verification techniques (VHDL/System Verilog/UVM) Working with current FPGA technologies (Xilinx, Altera, Microsemi) Using model-driven engineering tools such as MATLAB & Simulink Designing and integrating high-speed interfaces (PCIe, DDR3, Ethernet) Deriving detailed firmware requirements from system-level documentation Working across the full firmware life cycle in a structured environment (ideally DO-254 or similar) Defining complex timing and area constraints for efficient place & route Debugging firmware designs and supporting integration & verification activities Supporting delivery leadership across multiple engineers This is an opportunity to work on genuinely advanced engineering programmes where your expertise will directly shape next-generation digital systems.
Mar 17, 2026
Contractor
Contract Firmware/FPGA Engineer Bristol or Edinburgh based (4 days a week and One day remote) Defence/Aerospace sector - SC Clearance is essential Up to £75 p/h - 12-month contract A leading Defence prime are looking for an experienced Firmware Engineer to join an expanding Engineering team that are responsible for delivering complex digital systems to meet demanding future customer requirements. Key skills Extensive FPGA/Firmware design experience in complex systems Advanced verification capability Experience with modern FPGA toolchains Structured life cycle experience (DO-254 or comparable highly desirable) Ability to influence processes and improve ways of working What You'll Be Doing Designing innovative VHDL-based FPGA architectures Applying advanced verification techniques (VHDL/System Verilog/UVM) Working with current FPGA technologies (Xilinx, Altera, Microsemi) Using model-driven engineering tools such as MATLAB & Simulink Designing and integrating high-speed interfaces (PCIe, DDR3, Ethernet) Deriving detailed firmware requirements from system-level documentation Working across the full firmware life cycle in a structured environment (ideally DO-254 or similar) Defining complex timing and area constraints for efficient place & route Debugging firmware designs and supporting integration & verification activities Supporting delivery leadership across multiple engineers This is an opportunity to work on genuinely advanced engineering programmes where your expertise will directly shape next-generation digital systems.
Network Web Proxy Infra Engineer - Investment Banking - Proxy Tech (F5 BIG-IP, McAfee, Skyhigh, Bluecoat) Our client is looking for a Web Proxy Network Engineer on a contract basis to support the delivery and enhancement of their EMEA network. This role is ideal for someone who already has hands-on experience working with Proxy technologies (such as McAfee, Skyhigh, Blue Coat, or similar), and is ready to step into a fast-paced enterprise environment where you can further deepen your expertise. You will: Support the implementation and configuration of Access Policies, routing and Management of Web Proxies Contribute to change and incident activities within a complex network infrastructure Collaborate with senior engineers and architecture teams to deliver stable, secure, and scalable services We are not looking for someone brand new to the technology - you should already be familiar with the key tools and concepts and be ready to contribute from day one, even if you're still developing full mastery. Core Skills & Experience Required: Hands-on experience supporting or configuring Proxy platforms (eg McAfee, Skyhigh, Blue Coat) Experience or knowledge of Load Balancing technologies such as F5 BIG IP (LTM/GTM) VMWare Next Gen Load Balancer (formerly AVI Networks) Working knowledge of TCP/IP, HTTP/S, SSL certificates, NAT, DNS, and Layer 7 protocols Comfort using CLI and GUI interfaces for network appliance configuration Preferred: Experience building from base and upgrading firmware of Web Proxies Experience of DLP/Malware Protection & Mitigation infrastructure Experience writing or editing iRules, health monitors, or similar load balancing policies Awareness of certificate management, TLS handshake flow, and debugging tools (Wireshark, Fiddler) Contract Role inside IR35 - initial 12 month contract - 3 days a week in office (candidate can be based near Manchester/Liverpool/Stoke/Birmingham) By applying to this job you are sending us your CV, which may contain personal information. Please refer to our Privacy Notice to understand how we process this information. In short, in order to supply you with work finding services, we will hold and process your personal data, and only with your express permission we will share this personal data with a client (or a third party working on behalf of the client) by email or by upload to the Client/third parties vendor management system. By giving us permission to send your CV to a client, this constitutes permission to share the personal data that would be necessary to consider your application, interview you (Phone/video/face to face) and if successful hire you. Scope AT acts as an employment agency for Permanent Recruitment and an employment business for the supply of temporary workers. By applying for this job you accept the Terms and Conditions, Data Protection Policy, Privacy Notice and Disclaimers which can be found at our website.
Mar 15, 2026
Contractor
Network Web Proxy Infra Engineer - Investment Banking - Proxy Tech (F5 BIG-IP, McAfee, Skyhigh, Bluecoat) Our client is looking for a Web Proxy Network Engineer on a contract basis to support the delivery and enhancement of their EMEA network. This role is ideal for someone who already has hands-on experience working with Proxy technologies (such as McAfee, Skyhigh, Blue Coat, or similar), and is ready to step into a fast-paced enterprise environment where you can further deepen your expertise. You will: Support the implementation and configuration of Access Policies, routing and Management of Web Proxies Contribute to change and incident activities within a complex network infrastructure Collaborate with senior engineers and architecture teams to deliver stable, secure, and scalable services We are not looking for someone brand new to the technology - you should already be familiar with the key tools and concepts and be ready to contribute from day one, even if you're still developing full mastery. Core Skills & Experience Required: Hands-on experience supporting or configuring Proxy platforms (eg McAfee, Skyhigh, Blue Coat) Experience or knowledge of Load Balancing technologies such as F5 BIG IP (LTM/GTM) VMWare Next Gen Load Balancer (formerly AVI Networks) Working knowledge of TCP/IP, HTTP/S, SSL certificates, NAT, DNS, and Layer 7 protocols Comfort using CLI and GUI interfaces for network appliance configuration Preferred: Experience building from base and upgrading firmware of Web Proxies Experience of DLP/Malware Protection & Mitigation infrastructure Experience writing or editing iRules, health monitors, or similar load balancing policies Awareness of certificate management, TLS handshake flow, and debugging tools (Wireshark, Fiddler) Contract Role inside IR35 - initial 12 month contract - 3 days a week in office (candidate can be based near Manchester/Liverpool/Stoke/Birmingham) By applying to this job you are sending us your CV, which may contain personal information. Please refer to our Privacy Notice to understand how we process this information. In short, in order to supply you with work finding services, we will hold and process your personal data, and only with your express permission we will share this personal data with a client (or a third party working on behalf of the client) by email or by upload to the Client/third parties vendor management system. By giving us permission to send your CV to a client, this constitutes permission to share the personal data that would be necessary to consider your application, interview you (Phone/video/face to face) and if successful hire you. Scope AT acts as an employment agency for Permanent Recruitment and an employment business for the supply of temporary workers. By applying for this job you accept the Terms and Conditions, Data Protection Policy, Privacy Notice and Disclaimers which can be found at our website.
We are seeking an experienced NetApp Senior Storage Engineer to join our enterprise infrastructure team on a initial 6 month contract. This is a hands-on technical role focused on the administration, support, and optimisation of NetApp storage environments and modern enterprise backup platforms as well as leading on project based work. We are seeking candidates who have experience at an expert level with: NetApp storage systems including NetApp ONTAP (Clustered ONTAP) Configuration and support of Storage Virtual Machines (SVMs) Management of Snapshots and SnapMirror replication Design and support of enterprise storage solutions Firmware and ONTAP upgrades Storage migrations and data lifecycle management Backup and Disaster Recovery including ideally tools such as Cohesity and / or Rubrik Backing up and restoring enterprise databases Protection of VM-based infrastructure If you are a proactive infrastructure specialist with strong NetApp and enterprise backup expertise, we would love to hear from you. This role will be hybrid based working 1-2 day per week in the office. Day Rate - £465 per day via umbrella company
Mar 14, 2026
Contractor
We are seeking an experienced NetApp Senior Storage Engineer to join our enterprise infrastructure team on a initial 6 month contract. This is a hands-on technical role focused on the administration, support, and optimisation of NetApp storage environments and modern enterprise backup platforms as well as leading on project based work. We are seeking candidates who have experience at an expert level with: NetApp storage systems including NetApp ONTAP (Clustered ONTAP) Configuration and support of Storage Virtual Machines (SVMs) Management of Snapshots and SnapMirror replication Design and support of enterprise storage solutions Firmware and ONTAP upgrades Storage migrations and data lifecycle management Backup and Disaster Recovery including ideally tools such as Cohesity and / or Rubrik Backing up and restoring enterprise databases Protection of VM-based infrastructure If you are a proactive infrastructure specialist with strong NetApp and enterprise backup expertise, we would love to hear from you. This role will be hybrid based working 1-2 day per week in the office. Day Rate - £465 per day via umbrella company
Senior Firmware Engineer Cambridge 80-90k dependant on experience My client is looking for an experienced Firmware Engineer to join a small, high-impact signal processing team. You will take ownership of the full embedded firmware stack, from initial investigation through to integration and release, working with a high degree of autonomy on cutting-edge communication technology. Responsibilities Design and maintain C firmware for TI DSPs and ARM aarch64 Linux platforms Implement and optimize MAC/RLC protocol stacks for GERAN, UTRAN, E-UTRAN, and NR Collaborate with FPGA teams to manage Xilinx SoC data paths and DMA transfers Requirements Extensive experience in C for resource-constrained targets, including deep knowledge of memory layout, linker scripts, and drivers for SPI, I2C, and DMA. Strong command of DSP fundamentals and 3GPP standards Several years of commercial experience in cellular or RF firmware. Bonus Skills Familiarity with TI DSP architecture or Xilinx SoC development toolchains Experience with open-source SDR tools like srsRAN or PCI-based host-to-DSP communication architectures. If you are a proactive problem-solver ready to take ownership of complex firmware challenges, apply today!
Mar 14, 2026
Full time
Senior Firmware Engineer Cambridge 80-90k dependant on experience My client is looking for an experienced Firmware Engineer to join a small, high-impact signal processing team. You will take ownership of the full embedded firmware stack, from initial investigation through to integration and release, working with a high degree of autonomy on cutting-edge communication technology. Responsibilities Design and maintain C firmware for TI DSPs and ARM aarch64 Linux platforms Implement and optimize MAC/RLC protocol stacks for GERAN, UTRAN, E-UTRAN, and NR Collaborate with FPGA teams to manage Xilinx SoC data paths and DMA transfers Requirements Extensive experience in C for resource-constrained targets, including deep knowledge of memory layout, linker scripts, and drivers for SPI, I2C, and DMA. Strong command of DSP fundamentals and 3GPP standards Several years of commercial experience in cellular or RF firmware. Bonus Skills Familiarity with TI DSP architecture or Xilinx SoC development toolchains Experience with open-source SDR tools like srsRAN or PCI-based host-to-DSP communication architectures. If you are a proactive problem-solver ready to take ownership of complex firmware challenges, apply today!
Providing electronics consultancy expertise for the healthcare product sector South Cambs; to c£80,000 DoE + Benefits Based in spacious offices and workshops just south of Cambridge, this established engineering company works with clients to innovate and develop leading medical and healthcare products from diagnostic instruments and drug delivery products to digital health platforms and cell therapy systems. They are currently looking to hire an Electronics Engineering Consultant to join their hardware team. This is a senior role within the group and will involve taking project leadership when discussing with new clients, supporting and mentoring others within the team, as well as a hands-on approach to engineering and developing solutions. Requirements: Degree in electronics or computer science AND demonstrable industry experience as a technical contributor for a wide range of relevant electronics projects. Experience with systems architecting of complex electro-mechanical or electro-optical based technology. Demonstrable expertise with firmware, FPGAs and CAD simulations (including hardware testing / verification). Ideally this expertise is for projects related to lab instruments or prototypes. Exposure to relevant manufacture processes would be desirable. Experience working within a technical consultancy setting and familiarity with medical development standards (ISO13485, ISO14971). This is both a technical and commercial role, and as well as excellent technical know-how, the role would need top communication skills including relationship management, business development and stakeholder empathy. The role would mostly be sited at their offices with hybrid working options (1-2 days per week at home) possible when projects allow. There is likely to be some UK and international travel to meet clients and manufacturing partners. Applicants will need full, unrestricted rights to work in the UK. On offer is an excellent, competitive salary and wide range of benefits. The company looks to support careers and provides an engaging platform where you can thrive, whilst working with likeminded colleagues. Another top job from ECM, the high-tech recruitment experts. Even if this job's not quite right, do contact us now - we may well have the ideal job for you. To discuss your requirements call (phone number removed) or email your CV. We will always ask before forwarding your CV. Please apply (quoting ref: CV27563 ) only if you are eligible to live and work in the UK. By submitting your details you certify that the information you provide is accurate.
Mar 14, 2026
Full time
Providing electronics consultancy expertise for the healthcare product sector South Cambs; to c£80,000 DoE + Benefits Based in spacious offices and workshops just south of Cambridge, this established engineering company works with clients to innovate and develop leading medical and healthcare products from diagnostic instruments and drug delivery products to digital health platforms and cell therapy systems. They are currently looking to hire an Electronics Engineering Consultant to join their hardware team. This is a senior role within the group and will involve taking project leadership when discussing with new clients, supporting and mentoring others within the team, as well as a hands-on approach to engineering and developing solutions. Requirements: Degree in electronics or computer science AND demonstrable industry experience as a technical contributor for a wide range of relevant electronics projects. Experience with systems architecting of complex electro-mechanical or electro-optical based technology. Demonstrable expertise with firmware, FPGAs and CAD simulations (including hardware testing / verification). Ideally this expertise is for projects related to lab instruments or prototypes. Exposure to relevant manufacture processes would be desirable. Experience working within a technical consultancy setting and familiarity with medical development standards (ISO13485, ISO14971). This is both a technical and commercial role, and as well as excellent technical know-how, the role would need top communication skills including relationship management, business development and stakeholder empathy. The role would mostly be sited at their offices with hybrid working options (1-2 days per week at home) possible when projects allow. There is likely to be some UK and international travel to meet clients and manufacturing partners. Applicants will need full, unrestricted rights to work in the UK. On offer is an excellent, competitive salary and wide range of benefits. The company looks to support careers and provides an engaging platform where you can thrive, whilst working with likeminded colleagues. Another top job from ECM, the high-tech recruitment experts. Even if this job's not quite right, do contact us now - we may well have the ideal job for you. To discuss your requirements call (phone number removed) or email your CV. We will always ask before forwarding your CV. Please apply (quoting ref: CV27563 ) only if you are eligible to live and work in the UK. By submitting your details you certify that the information you provide is accurate.
FPGA Engineer 12-month initial contract Onsite full time in Edinburgh 75ph, UMB, inside IR35 SC will be required for this position due to the nature of work. Our client are looking for a Firmware Engineer at Senior or Principal Level to join their team in Edinburgh. The client is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, they employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Their employees are not just part of a team, they are key contributors to shaping innovation, advancing technology, and enhancing global safety. As an experienced Firmware/FPGA Engineer, you will work with the support of experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements. You will use or develop team leading experience to support the delivery of work from several engineers. Your expertise will also be key to enhance processes and ways of working across UK wide FPGA/Firmware delivery teams. Creating innovative VHDL based FPGA designs Advanced verification techniques using either VHDL or SystemVerilog / UVM Current FPGA technologies from either Xilinx, Altera or Microsemi and their tools Model Driven Engineering tools including MATLAB and Simulink High Speed Interface Design & Integration, including PCIe, DDR3, Ethernet Analysing system level documents and deriving detailed Firmware requirements Adopting a methodical approach to the full firmware design lifecycle, ideally working to a structured firmware process such as RTCA DO-254 or similar Specifying complex timing and area constraints for efficient FPGA place and route De-bugging firmware designs and supporting system related verification and integration Effective and flexible communication Security Clearance This role is subject to pre-employment screening in line with the UK Government's Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: (url removed)>
Mar 13, 2026
Contractor
FPGA Engineer 12-month initial contract Onsite full time in Edinburgh 75ph, UMB, inside IR35 SC will be required for this position due to the nature of work. Our client are looking for a Firmware Engineer at Senior or Principal Level to join their team in Edinburgh. The client is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, they employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Their employees are not just part of a team, they are key contributors to shaping innovation, advancing technology, and enhancing global safety. As an experienced Firmware/FPGA Engineer, you will work with the support of experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements. You will use or develop team leading experience to support the delivery of work from several engineers. Your expertise will also be key to enhance processes and ways of working across UK wide FPGA/Firmware delivery teams. Creating innovative VHDL based FPGA designs Advanced verification techniques using either VHDL or SystemVerilog / UVM Current FPGA technologies from either Xilinx, Altera or Microsemi and their tools Model Driven Engineering tools including MATLAB and Simulink High Speed Interface Design & Integration, including PCIe, DDR3, Ethernet Analysing system level documents and deriving detailed Firmware requirements Adopting a methodical approach to the full firmware design lifecycle, ideally working to a structured firmware process such as RTCA DO-254 or similar Specifying complex timing and area constraints for efficient FPGA place and route De-bugging firmware designs and supporting system related verification and integration Effective and flexible communication Security Clearance This role is subject to pre-employment screening in line with the UK Government's Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: (url removed)>
Senior Embedded Software Engineer up to 70k Base + Benefits Ref: ABJ6500 Midlands Onsite: Perm An exciting opportunity has arisen for a Senior Embedded Software Engineer to join a well-established, globally recognised engineering organisation specialising in critical power and electrical test systems. With operations across the globe, the company is known for delivering innovative, high-reliability engineering solutions used in mission-critical environments worldwide. As Senior Embedded Software Engineer you will play a key role in the design and development of embedded control software for advanced industrial power systems, working within a collaborative multidisciplinary engineering team. You will work closely with Electrical, Mechanical and Systems Engineers to deliver robust, safe and cost-effective solutions used by global customers. Key Responsibilities Translate system and customer requirements into software specifications and acceptance criteria Design embedded software architecture and interfaces for ARM-based controllers (STM32) Develop embedded firmware in C/C++ within RTOS environments (FreeRTOS or similar) Implement industrial communication protocols such as Modbus, CAN and Ethernet Integrate software with sensors, actuators and industrial control hardware Perform unit testing, static analysis, code reviews and verification activities Develop SIL/HIL test environments and support validation activities Produce clear technical documentation including design specifications and test plans Work within modern development practices including Git, trunk-based development and semantic versioning Support manufacturing, commissioning and service teams with technical investigations Contribute to continuous improvement of development processes and engineering standards Skills & Experience Required Degree in Software Engineering, Computer Engineering, Electrical Engineering or similar Strong experience developing embedded software in industrial or engineering environments Strong C/C++ development experience on ARM Cortex microcontrollers (STM32 desirable) Experience working with RTOS concepts (task scheduling, synchronisation, debugging) Knowledge of functional safety or secure coding practices (MISRA, IEC61508 or similar) Experience with unit testing, static analysis and code quality tools Experience implementing industrial communications (Modbus, CAN, TCP/IP, Serial) Experience working with hardware-software integration Experience working with any of the following would be beneficial: Critical power or energy infrastructure systems Industrial automation or control systems Electrical test or commissioning environments Generator or power distribution equipment Industrial electronics or control panels Data centre or missioncritical infrastructure Safetycritical or high-reliability embedded systems Python or MATLAB experience for automation or test development would also be advantageous. Stable, established engineering business with strong technical reputation - Base + Benefits. To Apply: Contact Alison Basson on (phone number removed) / (phone number removed) Email: Ref: ABJ6500
Mar 13, 2026
Full time
Senior Embedded Software Engineer up to 70k Base + Benefits Ref: ABJ6500 Midlands Onsite: Perm An exciting opportunity has arisen for a Senior Embedded Software Engineer to join a well-established, globally recognised engineering organisation specialising in critical power and electrical test systems. With operations across the globe, the company is known for delivering innovative, high-reliability engineering solutions used in mission-critical environments worldwide. As Senior Embedded Software Engineer you will play a key role in the design and development of embedded control software for advanced industrial power systems, working within a collaborative multidisciplinary engineering team. You will work closely with Electrical, Mechanical and Systems Engineers to deliver robust, safe and cost-effective solutions used by global customers. Key Responsibilities Translate system and customer requirements into software specifications and acceptance criteria Design embedded software architecture and interfaces for ARM-based controllers (STM32) Develop embedded firmware in C/C++ within RTOS environments (FreeRTOS or similar) Implement industrial communication protocols such as Modbus, CAN and Ethernet Integrate software with sensors, actuators and industrial control hardware Perform unit testing, static analysis, code reviews and verification activities Develop SIL/HIL test environments and support validation activities Produce clear technical documentation including design specifications and test plans Work within modern development practices including Git, trunk-based development and semantic versioning Support manufacturing, commissioning and service teams with technical investigations Contribute to continuous improvement of development processes and engineering standards Skills & Experience Required Degree in Software Engineering, Computer Engineering, Electrical Engineering or similar Strong experience developing embedded software in industrial or engineering environments Strong C/C++ development experience on ARM Cortex microcontrollers (STM32 desirable) Experience working with RTOS concepts (task scheduling, synchronisation, debugging) Knowledge of functional safety or secure coding practices (MISRA, IEC61508 or similar) Experience with unit testing, static analysis and code quality tools Experience implementing industrial communications (Modbus, CAN, TCP/IP, Serial) Experience working with hardware-software integration Experience working with any of the following would be beneficial: Critical power or energy infrastructure systems Industrial automation or control systems Electrical test or commissioning environments Generator or power distribution equipment Industrial electronics or control panels Data centre or missioncritical infrastructure Safetycritical or high-reliability embedded systems Python or MATLAB experience for automation or test development would also be advantageous. Stable, established engineering business with strong technical reputation - Base + Benefits. To Apply: Contact Alison Basson on (phone number removed) / (phone number removed) Email: Ref: ABJ6500
Job Title: Senior Electronics/Firmware Engineer Salary: 50,000 - 60,000 per annum Contract: Full-Time Location: Warwick, UK. Hybrid, 2-3 days in our Warwick office About the Role: Our client is looking for a Senior Electronics Engineer with experience of embedded software to work on the electronics and firmware for their innovative range of measurement products. You will be a part of a strong research and development team which includes electronics hardware, embedded software, cloud & backend software and mobile app development. The work you do will be crucial to the success of our client's current and future products in the marketplace. You will have the opportunity to make a real difference to future products. This is a hands-on role and would need on-site presence around 3 days per week. Key Responsibilities: Design of robust products from concepts and specifications, bringing innovative solutions to complex problems Bringing your experience to bear with hands on development Oversee PCB design and layout, ensuring best practice and high-quality results Write and specify test plans for hardware verification and production testing Support environmental and EMC testing during qualification Perform circuit analysis including power consumption, component tolerance & reliability Capture and implement design requirements in collaboration with other teams. Essential Skills & Experience: Experience of delivering digital electronics designs from concept to production, preferably with a focus on battery powered, microprocessor-based applications Be technically fluent in hardware with some experience of embedded software Oversight of PCB Design & layout Familiarity with standard interface busses such as SPI, I2C, UART & USB Product development with regards to DFx (design for safety, testability, and manufacturability) Knowledge of test & verification techniques in support of product lifecycle development Experience of using embedded C on microcontrollers A Bachelor's degree in Electronic Engineering or equivalent experience Strong communication skills, both written & verbal. Desirable Skills/Experience: These skills/experience are not mandatory but would be an advantage to candidates able to demonstrate any of the following: Full product life cycle development & management Experience with environmental and EMC testing during qualification Production test development & operation when working with in-house or contract manufacturers Experience with battery powered Bluetooth or Wi-Fi devices Some experience of analogue electronics design would be advantageous Technical fluency in any of the following: Mechanical or industrial design; Manufacturing engineering or factory test setups Experience of certification process such as CE, ISED and FCC. Benefits The opportunity to work in a dynamic, innovative environment. Hybrid working arrangements. A benefits package including: Pension; Comprehensive healthcare through AXA; 24/7 On-line GP support A share scheme 25 Days Annual Holiday, plus 8 Public Bank Holidays A supportive team culture with regular team events and professional development opportunities Discount schemes including software services discounts Free car parking on-site Please note - our client is unable to provide Visa Sponsorship. You must be eligible to live & work in the UK. About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies Privacy Notice.
Oct 06, 2025
Full time
Job Title: Senior Electronics/Firmware Engineer Salary: 50,000 - 60,000 per annum Contract: Full-Time Location: Warwick, UK. Hybrid, 2-3 days in our Warwick office About the Role: Our client is looking for a Senior Electronics Engineer with experience of embedded software to work on the electronics and firmware for their innovative range of measurement products. You will be a part of a strong research and development team which includes electronics hardware, embedded software, cloud & backend software and mobile app development. The work you do will be crucial to the success of our client's current and future products in the marketplace. You will have the opportunity to make a real difference to future products. This is a hands-on role and would need on-site presence around 3 days per week. Key Responsibilities: Design of robust products from concepts and specifications, bringing innovative solutions to complex problems Bringing your experience to bear with hands on development Oversee PCB design and layout, ensuring best practice and high-quality results Write and specify test plans for hardware verification and production testing Support environmental and EMC testing during qualification Perform circuit analysis including power consumption, component tolerance & reliability Capture and implement design requirements in collaboration with other teams. Essential Skills & Experience: Experience of delivering digital electronics designs from concept to production, preferably with a focus on battery powered, microprocessor-based applications Be technically fluent in hardware with some experience of embedded software Oversight of PCB Design & layout Familiarity with standard interface busses such as SPI, I2C, UART & USB Product development with regards to DFx (design for safety, testability, and manufacturability) Knowledge of test & verification techniques in support of product lifecycle development Experience of using embedded C on microcontrollers A Bachelor's degree in Electronic Engineering or equivalent experience Strong communication skills, both written & verbal. Desirable Skills/Experience: These skills/experience are not mandatory but would be an advantage to candidates able to demonstrate any of the following: Full product life cycle development & management Experience with environmental and EMC testing during qualification Production test development & operation when working with in-house or contract manufacturers Experience with battery powered Bluetooth or Wi-Fi devices Some experience of analogue electronics design would be advantageous Technical fluency in any of the following: Mechanical or industrial design; Manufacturing engineering or factory test setups Experience of certification process such as CE, ISED and FCC. Benefits The opportunity to work in a dynamic, innovative environment. Hybrid working arrangements. A benefits package including: Pension; Comprehensive healthcare through AXA; 24/7 On-line GP support A share scheme 25 Days Annual Holiday, plus 8 Public Bank Holidays A supportive team culture with regular team events and professional development opportunities Discount schemes including software services discounts Free car parking on-site Please note - our client is unable to provide Visa Sponsorship. You must be eligible to live & work in the UK. About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies Privacy Notice.
Salary - £90,000 + discretionary bonus Hybrid working - x2 days per week based in London Spencer Rose are partnered with a leading financial services organisation who are on the look out for a Senior Network infrastructure Engineer. Within this role, the Senior Network Infrastructure Engineer will be responsible for optimizing their network and data centre infrastructure, monitoring network alerts as well as troubleshooting various network technologies. The Senior Network Infrastructure Engineer will have the following experience - Responsible for the configuration and maintenance of their data center and cloud network architecture Responsible for solving operations tickets through troubleshooting any connectivity issues Developing and maintaining operational documentation, including runbooks, network diagrams, and configuration records Adhere to strict change management process to deploy Firewall rule change requests, scheduled firmware upgrades and other network build, changes, or maintenance activities The Senior Network Infrastructure Engineer will need to have the following skills/experience - Must have in-depth experience of working in a multi-vendor Firewall environment (Checkpoint, ASA, Fortinet), that involves implementing & troubleshooting Firewall rule changes, NAT & VPN in a segmented network with multiple layers of Firewalls Extensive experience across Datacenter Infrastructure - Cisco ACI deployment & Cisco NX-OS Extensive knowledge of LAN/WAN technologies including routing protocols, route redistribution, manipulation, and filtering. Proven experience with deploying and troubleshooting issues related to WLAN Must have a background working within either Banking, Financial Services or Insurance
Oct 02, 2025
Full time
Salary - £90,000 + discretionary bonus Hybrid working - x2 days per week based in London Spencer Rose are partnered with a leading financial services organisation who are on the look out for a Senior Network infrastructure Engineer. Within this role, the Senior Network Infrastructure Engineer will be responsible for optimizing their network and data centre infrastructure, monitoring network alerts as well as troubleshooting various network technologies. The Senior Network Infrastructure Engineer will have the following experience - Responsible for the configuration and maintenance of their data center and cloud network architecture Responsible for solving operations tickets through troubleshooting any connectivity issues Developing and maintaining operational documentation, including runbooks, network diagrams, and configuration records Adhere to strict change management process to deploy Firewall rule change requests, scheduled firmware upgrades and other network build, changes, or maintenance activities The Senior Network Infrastructure Engineer will need to have the following skills/experience - Must have in-depth experience of working in a multi-vendor Firewall environment (Checkpoint, ASA, Fortinet), that involves implementing & troubleshooting Firewall rule changes, NAT & VPN in a segmented network with multiple layers of Firewalls Extensive experience across Datacenter Infrastructure - Cisco ACI deployment & Cisco NX-OS Extensive knowledge of LAN/WAN technologies including routing protocols, route redistribution, manipulation, and filtering. Proven experience with deploying and troubleshooting issues related to WLAN Must have a background working within either Banking, Financial Services or Insurance
Computer Futures - London & S.E(Permanent and Contract)
Bristol, Somerset
Join a pioneering company creating assistive technology that transforms lives by giving a voice to those who need it most. This is a senior leadership role offering strategic influence, collaboration with multidisciplinary teams, and the opportunity to shape the future of innovative, life-changing products. You'll lead a talented engineering team, drive technical strategy, and ensure compliance with rigorous medical device standards while delivering products that make a real difference. Key Responsibilities Strategic Leadership & Delivery Lead and develop a 6-person engineering team across hardware, firmware, and QA disciplines. Oversee day-to-day planning and execution while focusing on long-term strategy and architectural decisions. Align technical roadmaps with product goals, ensuring projects meet quality, cost, and time targets. Support senior leadership in shaping hardware strategy and future product direction. Identify and communicate resourcing and delivery risks early at a leadership level. Process, Quality & Compliance Maintain and improve product development processes in line with ISO 13485 and related standards. Ensure compliance with ISO 14971, IEC 60601-1, and other safety-critical regulations. Drive CAPA processes with speed, clarity, and collaboration. Team Development Provide coaching, feedback, and career development for engineers. Support onboarding and mentoring of new team members. Skills & Experience Essential: Strong people management experience leading engineering teams. Background in small electronics (eg, phones, laptops, microelectronics). Proven experience in regulated industries, ideally medical devices. Deep understanding of ISO 13485, ISO 14971, and IEC 60601 standards. Ability to balance strategic leadership with operational oversight. Excellent communication and stakeholder management skills. Benefits & Perks Salary: £65,000-£80,000 Competitive benefits package including private medical insurance Hybrid working model Wellness benefits and paid volunteering days Inclusive, supportive culture with a strong focus on sustainability If you're ready to lead talented engineers and deliver technology that changes lives, we'd love to hear from you! Apply now or reach out for more details. To find out more about Computer Futures please visit our website Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC387148 England and Wales
Oct 02, 2025
Full time
Join a pioneering company creating assistive technology that transforms lives by giving a voice to those who need it most. This is a senior leadership role offering strategic influence, collaboration with multidisciplinary teams, and the opportunity to shape the future of innovative, life-changing products. You'll lead a talented engineering team, drive technical strategy, and ensure compliance with rigorous medical device standards while delivering products that make a real difference. Key Responsibilities Strategic Leadership & Delivery Lead and develop a 6-person engineering team across hardware, firmware, and QA disciplines. Oversee day-to-day planning and execution while focusing on long-term strategy and architectural decisions. Align technical roadmaps with product goals, ensuring projects meet quality, cost, and time targets. Support senior leadership in shaping hardware strategy and future product direction. Identify and communicate resourcing and delivery risks early at a leadership level. Process, Quality & Compliance Maintain and improve product development processes in line with ISO 13485 and related standards. Ensure compliance with ISO 14971, IEC 60601-1, and other safety-critical regulations. Drive CAPA processes with speed, clarity, and collaboration. Team Development Provide coaching, feedback, and career development for engineers. Support onboarding and mentoring of new team members. Skills & Experience Essential: Strong people management experience leading engineering teams. Background in small electronics (eg, phones, laptops, microelectronics). Proven experience in regulated industries, ideally medical devices. Deep understanding of ISO 13485, ISO 14971, and IEC 60601 standards. Ability to balance strategic leadership with operational oversight. Excellent communication and stakeholder management skills. Benefits & Perks Salary: £65,000-£80,000 Competitive benefits package including private medical insurance Hybrid working model Wellness benefits and paid volunteering days Inclusive, supportive culture with a strong focus on sustainability If you're ready to lead talented engineers and deliver technology that changes lives, we'd love to hear from you! Apply now or reach out for more details. To find out more about Computer Futures please visit our website Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC387148 England and Wales
Job Title: Electronics Test Engineer Location: Peterlee Salary: Up to £45k per annum doe Job Type: Full-time, Permanent To be considered, candidates must be eligible to work in the UK and able to attend work on site at our facility in Peterlee, UK. Applicants must have proven experience with LabVIEW, as this is integral to the role. Unfortunately, candidates without this experience cannot be considered. Founded on decades of expertise, ABT has evolved into a leader in battery technology. Our journey began with a mission to provide OEMs with superior battery solutions, and we have consistently achieved this through continuous innovation and dedication to quality. Our extensive experience allows us to understand and anticipate the unique challenges faced by our clients, ensuring that we provide tailored solutions that drive success. Our headquarters and state-of-the-art battery pack manufacturing facility are located in the UK, strategically positioned to serve our clients effectively across the globe, including the United States of America. We also have a team based in Germany, enhancing our ability to fully support European OEMs with their custom battery pack needs. Our strategic locations allow us to seamlessly serve all geographical markets, ensuring efficient and reliable operations. Our commitment to excellence and customer-centric approach ensures that your product's power needs are met with the highest standards of quality and performance. Scope of the Role Working within the Engineering team and supporting the Senior Electronics Test Engineer with new product testing development for rechargeable battery solutions. We're looking for a candidate with a creative and innovate mindset, to design and develop new custom automated test equipment, assist with the maintenance of existing equipment, to work with test technicians and collaborate with other departments in NPI and PFMEA processes for new products. We are looking for a proactive and detail-oriented Electronics Test Engineer with a strong background in electrical and electronic engineering, ideally supported by hands-on experience in a manufacturing or test environment. The successful candidate will combine excellent technical skills, particularly in LabVIEW programming, troubleshooting, and test equipment development, with strong problem-solving ability and a structured approach to work. They will be an organised and motivated individual who communicates clearly, adapts well to change, and enjoys collaborating across engineering, NPI production, and quality teams to deliver reliable solutions and continuous improvements. Main Duties and Responsibilities Test Design & Execution Design and execute test plans for new battery products under development. Develop test specifications in line with customer requirements and SPQP standards. Conduct failure mode analysis and support prevention activities to improve product reliability. Equipment Development & Maintenance Design, develop, and validate new test equipment and fixtures to support battery pack manufacture. Maintain and improve existing test equipment and fixtures to ensure accuracy, reliability, and efficiency. Manage version control of compiled firmware (hex files) and provide support for programming fixtures. Production & Technical Support Provide technical expertise and troubleshooting support to production teams. Deliver ongoing training, mentoring, and guidance to Electronics Technicians. Actively contribute to PFMEA activities and provide testing input into the New Product Introduction (NPI) process. Quality, Validation & Reporting Verify and validate test equipment and fixtures in accordance with company and industry standards. Maintain accurate records and documentation in line with quality management systems and company procedures. Prepare clear, detailed test reports and communicate results effectively to both internal teams and external customers. Qualifications and Experience Degree in Electrical and Electronic Engineering (BEng) or equivalent relevant qualification/experience. Previous experience in a similar test engineering role within electronics or manufacturing. Strong programming skills, particularly in LabVIEW (primary tool, with established VI library), with additional experience in C# and Arduino platforms. Experience using SQL databases for test data acquisition and analysis. Excellent IT skills across a range of applications. Strong fault-finding and troubleshooting ability, both on test equipment and on electronic products. Clear and effective written and verbal communication skills. Highly organised, self-motivated and enthusiastic, with the ability to prioritise effectively and work flexibly in response to changing circumstances and demands. Additional Notes Please note that we kindly ask recruitment agencies to refrain from contacting us regarding this vacancy. Any unsolicited CVs submitted will be considered a free-of-charge submission, and no agency fees will apply. Candidates with the relevant experience or job titles of: Test Engineer, Converting Engineer, Electrical Engineer, Electrical Technician may also be considered for this role.
Oct 01, 2025
Full time
Job Title: Electronics Test Engineer Location: Peterlee Salary: Up to £45k per annum doe Job Type: Full-time, Permanent To be considered, candidates must be eligible to work in the UK and able to attend work on site at our facility in Peterlee, UK. Applicants must have proven experience with LabVIEW, as this is integral to the role. Unfortunately, candidates without this experience cannot be considered. Founded on decades of expertise, ABT has evolved into a leader in battery technology. Our journey began with a mission to provide OEMs with superior battery solutions, and we have consistently achieved this through continuous innovation and dedication to quality. Our extensive experience allows us to understand and anticipate the unique challenges faced by our clients, ensuring that we provide tailored solutions that drive success. Our headquarters and state-of-the-art battery pack manufacturing facility are located in the UK, strategically positioned to serve our clients effectively across the globe, including the United States of America. We also have a team based in Germany, enhancing our ability to fully support European OEMs with their custom battery pack needs. Our strategic locations allow us to seamlessly serve all geographical markets, ensuring efficient and reliable operations. Our commitment to excellence and customer-centric approach ensures that your product's power needs are met with the highest standards of quality and performance. Scope of the Role Working within the Engineering team and supporting the Senior Electronics Test Engineer with new product testing development for rechargeable battery solutions. We're looking for a candidate with a creative and innovate mindset, to design and develop new custom automated test equipment, assist with the maintenance of existing equipment, to work with test technicians and collaborate with other departments in NPI and PFMEA processes for new products. We are looking for a proactive and detail-oriented Electronics Test Engineer with a strong background in electrical and electronic engineering, ideally supported by hands-on experience in a manufacturing or test environment. The successful candidate will combine excellent technical skills, particularly in LabVIEW programming, troubleshooting, and test equipment development, with strong problem-solving ability and a structured approach to work. They will be an organised and motivated individual who communicates clearly, adapts well to change, and enjoys collaborating across engineering, NPI production, and quality teams to deliver reliable solutions and continuous improvements. Main Duties and Responsibilities Test Design & Execution Design and execute test plans for new battery products under development. Develop test specifications in line with customer requirements and SPQP standards. Conduct failure mode analysis and support prevention activities to improve product reliability. Equipment Development & Maintenance Design, develop, and validate new test equipment and fixtures to support battery pack manufacture. Maintain and improve existing test equipment and fixtures to ensure accuracy, reliability, and efficiency. Manage version control of compiled firmware (hex files) and provide support for programming fixtures. Production & Technical Support Provide technical expertise and troubleshooting support to production teams. Deliver ongoing training, mentoring, and guidance to Electronics Technicians. Actively contribute to PFMEA activities and provide testing input into the New Product Introduction (NPI) process. Quality, Validation & Reporting Verify and validate test equipment and fixtures in accordance with company and industry standards. Maintain accurate records and documentation in line with quality management systems and company procedures. Prepare clear, detailed test reports and communicate results effectively to both internal teams and external customers. Qualifications and Experience Degree in Electrical and Electronic Engineering (BEng) or equivalent relevant qualification/experience. Previous experience in a similar test engineering role within electronics or manufacturing. Strong programming skills, particularly in LabVIEW (primary tool, with established VI library), with additional experience in C# and Arduino platforms. Experience using SQL databases for test data acquisition and analysis. Excellent IT skills across a range of applications. Strong fault-finding and troubleshooting ability, both on test equipment and on electronic products. Clear and effective written and verbal communication skills. Highly organised, self-motivated and enthusiastic, with the ability to prioritise effectively and work flexibly in response to changing circumstances and demands. Additional Notes Please note that we kindly ask recruitment agencies to refrain from contacting us regarding this vacancy. Any unsolicited CVs submitted will be considered a free-of-charge submission, and no agency fees will apply. Candidates with the relevant experience or job titles of: Test Engineer, Converting Engineer, Electrical Engineer, Electrical Technician may also be considered for this role.
Senior Software Engineer Location: Margate Job Type: Full-time Overview: We seek a Senior Software Engineer to drive innovation in embedded firmware development. You will lead R&D efforts, collaborate with leadership, and ensure high-quality software solutions for our products. Key Responsibilities: Lead firmware development and mentor junior engineers. Collaborate on product concepts and refine specifications. Translate system requirements into software solutions. Develop, test, and document software programs. Work with hardware teams to optimise integration. Research and implement emerging technologies. Assess technical risks and provide expert guidance. Support design reviews and project management. Ensure compliance with quality and safety standards. Qualifications: Education: Bachelor's in Electrical Engineering, Computer Science, or related field (Master's preferred). Experience: 10+ years in embedded software development with leadership experience. Skills: Expertise in ARM-based microcontrollers, FreeRTOS, and Microsoft Visual Studio. Knowledge of RF communication and marine navigation is a plus. Competencies: Strong leadership, problem-solving, and collaboration skills in a fast-paced environment. CVs in Word Format to New Appointments Group, Expertly Matching Employers and Jobseekers since 1975. Committed to diversity, equality and opportunity for all.
Oct 01, 2025
Full time
Senior Software Engineer Location: Margate Job Type: Full-time Overview: We seek a Senior Software Engineer to drive innovation in embedded firmware development. You will lead R&D efforts, collaborate with leadership, and ensure high-quality software solutions for our products. Key Responsibilities: Lead firmware development and mentor junior engineers. Collaborate on product concepts and refine specifications. Translate system requirements into software solutions. Develop, test, and document software programs. Work with hardware teams to optimise integration. Research and implement emerging technologies. Assess technical risks and provide expert guidance. Support design reviews and project management. Ensure compliance with quality and safety standards. Qualifications: Education: Bachelor's in Electrical Engineering, Computer Science, or related field (Master's preferred). Experience: 10+ years in embedded software development with leadership experience. Skills: Expertise in ARM-based microcontrollers, FreeRTOS, and Microsoft Visual Studio. Knowledge of RF communication and marine navigation is a plus. Competencies: Strong leadership, problem-solving, and collaboration skills in a fast-paced environment. CVs in Word Format to New Appointments Group, Expertly Matching Employers and Jobseekers since 1975. Committed to diversity, equality and opportunity for all.
