2278 jobs found

Our premium brand Automotive client is currently recruiting for the following role: NVH Modal test engineer - 27.21/hr (Inside IR35) Warwickshire 8 Months (potential for yearly renewal) Duties: Measurement, analysis and reporting of vehicle, system and component modal performance status to meet key gateway requirements. Responsible for lab-based transfer function measurement to support NVH attribute needs and NVH issue investigation, i.e. Transfer Path Analysis to support road, powertrain and simulator teams - Undertake detailed correlation work in collaboration with CAE teams both internal and external to improve future models and simulations. - Maintain the Modal lab workspace and ensure it is fit for use, and calibration compliant - Support taskforce activities to solve complex engineering problems as required - Maintain up to date method statements and processes for modal and systems testing Skills: - Experience within a modal testing environment and setup and use of impact hammer testing and shaker equipment - Good understanding of NVH signal processing and analysis, especially modal, structural and transfer function analysis - A methodical and detailed approach to planning, recording and executing high quality testing, and reporting - Ability to effectively present and communicate complex NVH data - Capable of working closely and collaboratively within a small team, inc. some coaching of apprentice colleague - Ability to identify and propose continuous improvements and new methods of work - Practical capability to carry out the basic fitting tasks necessary to set up and instrument tests, including ability to design new fixtures/rigs which can then be fabricated by the workshop teams. Education: - Degree or relevant equivalent experience Additional information: This role is on a contract basis and is Inside IR35. The services advertised by Premea Limited for this vacancy are those of an Employment Business. Premea is a specialist IT & Engineering recruitment consultancy representing clients in the UK and internationally within the Automotive, Motorsport and Aerospace sectors.

Assistant BMS Commissioning Engineer Are you a mid-level BMS Engineer looking to take the next step in your career? We're working with a leading Building Management Systems provider seeking a skilled and motivated BMS Engineer to join their growing team in the Midlands. Salary / Benefits: 40,000 - 55,000 Depending on experience Company Vehicle Superb benefits What You'll Be Doing: Commissioning, servicing, and maintaining BMS systems across client sites Integrating and troubleshooting communication protocols such as Modbus , BACnet , and KNX Working with HVAC plant equipment including AHUs, boilers, chillers, and VAV systems Collaborating with project teams to ensure smooth delivery and client satisfaction Providing technical support and diagnostics remotely and on-site What We're Looking For: Proven experience in BMS engineering (Trend, Tridium, Siemens, or similar) Strong understanding of communication protocols (Modbus, BACnet, etc.) Solid HVAC plant knowledge and system integration skills Excellent problem-solving and communication abilities Full UK driving licence and willingness to travel across the Midlands Why Apply? Work with a respected name in the BMS industry Be part of innovative projects in smart buildings and energy efficiency Career development opportunities and ongoing technical training Supportive team culture with a focus on quality and professionalism INDBMS

We believe in better. And we make it happen. Better content. Better products. And better careers. Working in Tech, Product or Data at Sky is about building the next and the new. From broadband to broadcast, streaming to mobile, SkyQ to Sky Glass, we never stand still. We optimise and innovate. We turn big ideas into the products, content and services millions of people love. And we do it all right here at Sky. As a Product Design Manager in our digital customer experience team, you'll own the creation of world-class customer experiences and deliver transformative solutions across and the My Sky app. You'll lead Agile teams, drive design strategy, and be accountable for outcomes that reflect our brand and meet customer needs. Sitting within the Customer Experience Centre of Excellence, you'll support CX strategy, design excellence, and performance across product roadmaps for the UK & Ireland. From joining Sky to engaging with our latest services, we're driven by one purpose: to create better experiences for our customers. What you'll do: Inspire a team of designers to craft intuitive, evidence-led experiences across web and app platforms, while nurturing their growth through tailored development. Shape design strategy that aligns with business goals, championing the customer voice and influencing product roadmaps. Partner across disciplines- from product to engineering - to ensure solutions meet user, business, and technical needs. Drive innovation through AI tools, design systems, and motion principles, delivering seamless, brand-aligned app-first experiences. Translate customer insights into actionable design improvements, leading workshops, sprints, and research collaboration. Own delivery and quality, track CX KPIs, and ensure accessibility standards are met across scalable, end-to-end journeys. What you'll bring: Track record in delivering world-class, customer-centred large-scale digital products and services across responsive web and native applications. Experience leading design teams across multiple workloads and complex initiatives Expert-level Figma skills, including scalable templates, advanced prototyping and experience leading large-scale component libraries Mastery in accessibility to create inclusive experiences, user research methods to understand customer problems and behaviours, and analytics tools (Usertesting, Adobe Analytics) to understand and improve journeys. Strong storytelling, stakeholder influence, and resilience in fast-paced, evolving environments. Please include portfolio/content showing evidence of your experience across these four areas: 1. People - Helping develop high-performing teams. 2. Process - Applying scalable UCD methods that drive measurable outcomes. 3. Position - Influencing strategy and embedding design across an organisation. 4. Product - Producing provable world-class app-first digital experiences (Outcomes & Impact) The Rewards There's one thing people can't stop talking about when it comes to : the perks. Here's a taster: Sky Q, for the TV you love all in one place The magic of Sky Glass at an exclusive rate A generous pension package Private healthcare Discounted mobile and broadband A wide range of Sky VIP rewards and experiences How you'll work The hybrid working expectations for this role are 3 days in the office per week. At Sky, we want to be a community that thrives by being together. Flexible working remains a key part of that. We want our people to have the best of both worlds - time working at home, as well as time in the office. Your office base London (Osterley) Our Osterley Campus is a 10-minute walk from Syon Lane train station. Or you can hop on one of our free shuttle buses that run to and from Osterley, Gunnersbury, Ealing Broadway and South Ealing tube stations. There are also plenty of bike shelters and showers. On campus, you'll find 13 subsidised restaurants, cafes, and a Waitrose. You can keep in shape at our subsidised gym, catch the latest shows and movies at our cinema, get your car washed, and even get pampered at our beauty salon. Leeds Our spacious Leeds tech hub is less than a mile from Leeds train station. There's plenty of parking in the surrounding streets and at the nearby CitiPark. Need a break? You can blow off steam over a game of pool or table tennis, and stay fit at our subsidised gym. Inclusion: At Sky we don't just look at your CV. We're more focused on who you are and your potential. We also know that everyone has a life outside work, so we're happy to discuss flexible working. We are a Disability Confident Accredited Employer, and welcome and encourage applications from all candidates. We will look to ensure a fair and consistent experience for all and will make reasonable adjustments to support you where appropriate. Please flag any adjustments you need to your recruiter as early as you can. Why wait? Apply now to build an amazing career and be part of a brilliant team. We can't wait to hear from you. To find out more about working with us, search on social media. A job you love to talk about. Just so you know: if your application is successful, we'll ask you to complete a criminal record check. And depending on the role you have applied for and the nature of any convictions you may have, we might have to withdraw the offer.

Location for this position is flexible, we are accepting candidates who are able to work Hybrid in either our Leeds, Livingston, or Osterley office. We believe in better. And we make it happen." Better content. Better products. And better careers. " Working in Tech, Product or Data at Sky is about building the next and the new. From broadband to broadcast, streaming to mobile," SkyQ "to Sky Glass, we never stand still. We optimise and innovate. " We turn" big ideas "into the products, content and services millions of people love. " And we do it all right here at Sky. " " As a Technical Product Owner, you will work closely with product colleagues, engineers, architects and engineering teams to shape and deliver high quality technical solutions. You will help keep everyone aligned, support clear communication and ensure that the work delivered is maintainable and meets the needs of the business. What you'll do - Breakdown complex problems through feature analysis . Lead on technical analysis ; breaking down complex features into development ready user stories . Write clear and detailed technical features and user stories with testable acceptance criteria and measurable benefits. Maintain a prioritised data driven backlog of features and user stories through refinements, planning and retrospectives . Read and interpret technical documentation, including system specifications and architecture diagrams, and use these to guide decisions. Build a strong understanding of how our systems work, how software is developed, tested and released. Contribute to agile ceremonies and support good practice across the team, using your knowledge of Agile, Scrum and the Agile for Sky framework. Alongside product delivery, you will also look for opportunities to improve existing systems. This may be performance, reliability, security, or simplifying processes to help the team work more effectively. What you'll bring - Strong previous experience in a Technical Analyst or Business Strong previous experience of leading technical analysis; breaking down complex capabilities and features into clear user stories and acceptance criteria U nderstanding of backlog management, including benefits analysis and delivery planning through data driven priority decisions The ability to read and understand technical documentation and ask the right questions. Strong communication skills and a calm, practical approach to problem solving. Experience working with development teams and understanding modern development and testing practices. Experience supporting agile ceremonies and helping teams adopt good agile practices. You will also be comfortable using tools such as Jira, Confluence, Miro, Figma, Postman and SQL as part of your everyday work. " Team overview: " " You'll be part of Customer Engagement Enablement, a portfolio within the Tech Platform Directorate. Our vision is simple: we enable teams to deliver future ready, modern platforms that accelerate change, simplify complexity and create experiences that exceed expectations while driving lasting value for our people, partners and customers. Our teams work across app, web and assisted channels, building the foundations that power brilliant end to end customer journeys. This is a fast moving, collaborative environment where you'll help shape technical direction, influence key customer touch points and enable teams across the business to innovate at pace. " The rewards" " There's "one thing people" can't "stop talking about when it comes to" : the" perks ." Here's "a taster: " Sky Q, for the TV you love all in one place " The magic of Sky Glass at an exclusive rate " A generous pension package " Private healthcare " Discounted mobile and broadband " A wide range of Sky VIP rewards and experiences " " Inclusion & how" you'll "work: " Recognised by The Times and Stonewall, we take pride in our approach to diversity and inclusion. Investing in society, fighting racial" injustice "and setting ambitious targets for representation at Sky. " We've "embraced hybrid working and split our time between unique office spaces and the convenience of working from home." You'll "find out more about what hybrid working looks like for your role" later on "in the recruitment process. " " Your office space: Leeds, Livingston or Osterley " We'd "love to hear from you" " Inventive, forward-thinking minds come together to work in Tech, Product and Data at Sky." It's "a place where you can explore what if, how far, and what next. " But better" doesn't "stop at what we do," it's "how we do it, too. We embrace each other's differences. We support our community and contribute to a sustainable future for our business and the planet. " " If you believe in better," we'll "back you all the way. " Just so you know: if your application is successful," we'll "ask you to complete a criminal record check. And depending on the role you have applied for and the nature of any convictions you may have, we might have to withdraw the offer. "

SHEQ Manager Job Type: Full-time Start Date: ASAP Duration: Permanent Location: Kings Langley Salary/ Hourly rate: 38,000 - 40,000 per annum + Company Car + plus benefits A SHEQ Manager is required for a large nation-wide construction and engineering firm who work throughout the UK. Our client is looking for an experienced and hardworking SHEQ Manager to work across multiple project sites and is able to travel as required. What does a SHEQ Manager role entail? Championing a proactive safety, health, environmental and quality culture across all project sites Developing and implementing SHEQ policies and procedures Conducting risk assessments and ensuring control measures are in place Investigating incidents and ensuring corrective actions are implemented Delivering training on safety procedures and best practices Carrying out audits and inspections to ensure compliance Advising on SHEQ legislation and company standards Promoting continuous improvement across all SHEQ performance Supporting Integrated Management Systems (ISO9001, ISO14001, ISO45001) Requirements for the SHEQ Manager role: Previous experience working as a SHEQ Manager within construction or civil engineering Professional qualification such as Tech IOSH and NEBOSH (or equivalent) Strong knowledge of SHEQ regulations and site practices Excellent communication and organisational skills Ability to work independently and as part of a team Full UK Driving Licence and willingness to travel Benefits of the SHEQ Manager Role: Company car (available for personal use) Pension scheme (5% employee / 5% employer contribution) Private healthcare package Profit-related annual bonus Group life insurance (3x salary after probation) Discounted gym membership and wellness benefits About us: Daniel Owen is an established recruitment consultancy specialising in the placement of quality temporary and permanent workers to all roles in the Built Environment. Working with some of the UK's largest and most respected construction, maintenance, and engineering companies.

Location for this position is flexible, we are accepting candidates who are able to work Hybrid in either our Leeds, Livingston, or Osterley office. We believe in better. And we make it happen." Better content. Better products. And better careers. " Working in Tech, Product or Data at Sky is about building the next and the new. From broadband to broadcast, streaming to mobile," SkyQ "to Sky Glass, we never stand still. We optimise and innovate. " We turn" big ideas "into the products, content and services millions of people love. " And we do it all right here at Sky. " " As a Technical Product Owner, you will work closely with product colleagues, engineers, architects and engineering teams to shape and deliver high quality technical solutions. You will help keep everyone aligned, support clear communication and ensure that the work delivered is maintainable and meets the needs of the business. What you'll do - Breakdown complex problems through feature analysis . Lead on technical analysis ; breaking down complex features into development ready user stories . Write clear and detailed technical features and user stories with testable acceptance criteria and measurable benefits. Maintain a prioritised data driven backlog of features and user stories through refinements, planning and retrospectives . Read and interpret technical documentation, including system specifications and architecture diagrams, and use these to guide decisions. Build a strong understanding of how our systems work, how software is developed, tested and released. Contribute to agile ceremonies and support good practice across the team, using your knowledge of Agile, Scrum and the Agile for Sky framework. Alongside product delivery, you will also look for opportunities to improve existing systems. This may be performance, reliability, security, or simplifying processes to help the team work more effectively. What you'll bring - Strong previous experience in a Technical Analyst or Business Strong previous experience of leading technical analysis; breaking down complex capabilities and features into clear user stories and acceptance criteria U nderstanding of backlog management, including benefits analysis and delivery planning through data driven priority decisions The ability to read and understand technical documentation and ask the right questions. Strong communication skills and a calm, practical approach to problem solving. Experience working with development teams and understanding modern development and testing practices. Experience supporting agile ceremonies and helping teams adopt good agile practices. You will also be comfortable using tools such as Jira, Confluence, Miro, Figma, Postman and SQL as part of your everyday work. " Team overview: " " You'll be part of Customer Engagement Enablement, a portfolio within the Tech Platform Directorate. Our vision is simple: we enable teams to deliver future ready, modern platforms that accelerate change, simplify complexity and create experiences that exceed expectations while driving lasting value for our people, partners and customers. Our teams work across app, web and assisted channels, building the foundations that power brilliant end to end customer journeys. This is a fast moving, collaborative environment where you'll help shape technical direction, influence key customer touch points and enable teams across the business to innovate at pace. " The rewards" " There's "one thing people" can't "stop talking about when it comes to" : the" perks ." Here's "a taster: " Sky Q, for the TV you love all in one place " The magic of Sky Glass at an exclusive rate " A generous pension package " Private healthcare " Discounted mobile and broadband " A wide range of Sky VIP rewards and experiences " " Inclusion & how" you'll "work: " Recognised by The Times and Stonewall, we take pride in our approach to diversity and inclusion. Investing in society, fighting racial" injustice "and setting ambitious targets for representation at Sky. " We've "embraced hybrid working and split our time between unique office spaces and the convenience of working from home." You'll "find out more about what hybrid working looks like for your role" later on "in the recruitment process. " " Your office space: Leeds, Livingston or Osterley " We'd "love to hear from you" " Inventive, forward-thinking minds come together to work in Tech, Product and Data at Sky." It's "a place where you can explore what if, how far, and what next. " But better" doesn't "stop at what we do," it's "how we do it, too. We embrace each other's differences. We support our community and contribute to a sustainable future for our business and the planet. " " If you believe in better," we'll "back you all the way. " Just so you know: if your application is successful," we'll "ask you to complete a criminal record check. And depending on the role you have applied for and the nature of any convictions you may have, we might have to withdraw the offer. "

Contamination Control Manager (Biologics CDMO) At SRG, we are excited to be partnering with our client, a biologics Contract Development and Manufacturing Organisation (CDMO), to appoint an experienced Contamination Control Manager. This is a senior, high-impact role for a contamination control leader who combines deep technical expertise with strong on-the-floor influence, embedding contamination control into systems, behaviours, and decision-making across a multi-facility, multi-client manufacturing environment. The Opportunity You will lead, develop and continuously enhance an established, integrated Contamination Control Strategy (CCS), ensuring it remains dynamic, risk-based and aligned with evolving business needs, regulatory expectations, and future-state technologies. Working closely with Manufacturing, MSAT and Quality, you will proactively identify, reduce and eliminate contamination risks across facilities, client products and processes, while maintaining inspection readiness and client confidence. Key Responsibilities Own and evolve the site Contamination Control Strategy in line with EU/UK GMP Annex 1, FDA and ICH expectations. Embed contamination control principles into facility and equipment design, process flows, cleaning and sterilisation strategies, supplier management and training programmes. Partner with Manufacturing to influence aseptic behaviours, shift routines, operator decision-making and capability development. Collaborate with MSAT across equipment design, tech transfer, scale-up, process characterisation and new product introduction. Ensure full integration of the CCS with Quality systems including deviations, investigations, CAPAs, change control and audit readiness. Lead contamination-focused risk assessments (including FMEA) across client processes, shared equipment, utilities, campaign manufacturing and changeovers. Translate risk into practical, executable operational controls and maintain assessments as living tools informed by data and trends. Design and deploy contamination control training tailored to a CDMO environment, reinforcing learning through hands-on coaching and on-the-floor engagement. Champion a strong site-wide contamination control culture where prevention is everyone's responsibility. Provide governance-level oversight of contamination-related data, driving continuous improvement and reduction of repeat deviations. Act as the contamination control SME during client audits and regulatory inspections. Candidate Profile Degree in Microbiology, Biology, Biochemistry, Chemical Engineering or related discipline (Master's preferred). Extensive industry experience in sterile or biologics pharmaceutical manufacturing, ideally within a CDMO. Strong expertise in aseptic processing, cleanroom operations and microbiological contamination control. Proven experience leading FMEA and cross-functional risk assessments. Solid understanding of global regulatory expectations. Ability to influence in matrixed environments with strong communication, coaching and facilitation skills. Desirable Experience Hands-on involvement with EU GMP Annex 1 implementation. Experience supporting tech transfer into commercial manufacturing. Regulatory inspection and client audit readiness experience. Background in facilities operating shared equipment or campaign manufacturing. What Success Looks Like Reduction in contamination events and repeat deviations. A clear, inspection-ready CCS understood across the site. Consistent aseptic behaviours across shifts and products. Strong client confidence and positive audit outcomes. Contamination control embedded into everyday operations, not managed by exception. What you can expect in return Excellent salary and benefits package including enhanced pension, healthcare and annual bonus scheme. A chance to make a real difference and lead from the front in a key role on site Working at the forefront of the biologics industry Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Client Manager - Accountancy Practice Location: Nantwich, Cheshire Salary: £45,000 - £51,000 + excellent benefits Client Manager - Leadership Opportunity in a Growing Accountancy Practice A highly regarded and growing accountancy practice is seeking an experienced Client Manager to join its expanding team in Nantwich. This is a fantastic opportunity for a qualified ACA / ACCA accountant from a mid to large accountancy firm who is looking to step into a client-facing leadership role with responsibility for managing a client portfolio, leading a team of accountants, and delivering high-quality advisory services. The role is ideal for a strong people manager who enjoys mentoring and developing staff, building strong client relationships, and contributing to the growth and success of a progressive accountancy practice. Key Responsibilities Manage a portfolio of SME and owner-managed business clients across a variety of sectors. Oversee the preparation and review of statutory accounts, management accounts, and financial statements. Deliver high-quality client relationship management and advisory services. Ensure compliance with UK GAAP, statutory reporting requirements, and tax legislation. Act as a trusted advisor to clients, supporting business growth and financial decision making. Provide strong leadership and people management to a team of accountants and trainees - 4 currently. Review work prepared by junior staff including accounts preparation, tax computations, and financial reporting. Offer technical guidance, mentoring, and coaching to support professional development. Foster a culture of continuous learning and high performance within the team. Assist with workflow planning, delegation, and resource allocation to ensure efficient delivery of client work. Identify opportunities for additional advisory services and practice growth within the client portfolio. Support business development and client retention initiatives. Contribute to practice efficiency improvements, systems development, and operational best practice. Requirements Essential ACA or ACCA qualified accountant (or qualified by experience). Minimum 5+ years' experience in an accountancy practice. Experience managing a client portfolio within a mid or large accountancy firm. Strong knowledge of UK GAAP, statutory accounts preparation, and financial reporting. Proven people management or team leadership experience. Excellent communication and client relationship management skills. Ability to manage multiple client deadlines and competing priorities. Benefits The firm offers an excellent benefits package designed to support work-life balance, wellbeing, and long-term career development: Competitive salary £45,000 - £51,000 25 days annual leave + bank holidays Birthday day off Pension scheme Life insurance Health & wellbeing programme Regular company events and team days Strong career progression opportunities Ongoing training and professional development Plus other excellent benefits Location & Commutable Areas The role is based in Nantwich, with commuting access from: Crewe, Stoke-on-Trent, Newcastle-under-Lyme, Sandbach, Congleton, Middlewich, Winsford, Northwich, Chester, Alsager, Holmes Chapel, Whitchurch, Market Drayton, Telford, Shrewsbury, Stafford, Macclesfield, and surrounding Cheshire / Shropshire areas. Candidates within approximately a one hour commute are encouraged to apply. Why Apply? This is an excellent opportunity for a Client Manager, Practice Manager, Senior Accountant, or Portfolio Manager looking to join a progressive and growing accountancy practice where they can lead a team, build strong client relationships, and contribute to the long-term growth of the firm. You will benefit from a supportive culture, excellent benefits, and genuine career progression opportunities within a successful and ambitious practice. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

Cloud Software Architect Java - BackEnd, Back End Google Cloud (GCP) Contract: Until December 2026 - Renewable Location: Essex Offices (located between Brentwood and Basildon) 4 days a week Rate: £600 per Day Inside IR35 The finance and banking division of this engineering company and household name is seeking a Software Engineer, Software Developer Software Architect to be responsible for designing, developing, testing and maintaining software applications and products to meet customer needs. The Software Architect will be involved in the entire software development lifecycle including designing software architecture, writing code, testing for quality. They are particularly interested in Version control systems (e.g. Git/GitHub) and CI/CD tools (e.g. Cloudbuild), including defining and optimising pipelines for backend deployments Main Tasks and Responsibilities Software Architect SDLC - BackEnd, Back End Google Cloud (GCP) Essential Skills & Experience Software Architect SDLC - BackEnd, Back End Google Cloud (GCP) # Java # Spring Boot # JUnit # GCP (Google Cloud Platform) # GitHub # Jetbrains products (e.g., IntelliJ IDEA) # Fossa (or similar open-source licence compliance tools) # SonarQube (or similar code quality analysis tools) # Checkmarx (or similar static application security testing tools) # Cycode (or similar software supply chain security platforms)

An innovative food business based near Stratford upon Avon is seeking a Process Technician to join it's team. You will be working in its greenfield rapeseed processing plant and associated power generation facility. This site is one of the most energy-efficient producers in the UK oilseed sector, producing sustainable, high-quality animal feed and food-grade vegetable oil. It is a state-of-the-art plant, generating heat and power for the process from UK forestry residues and off-cuts, and as such contributes to a greener and more sustainable environment for the UK. This is a 4 days on ( 7am 7pm), 4 days off, 4 nights on (7pm 7am), 4 days off shift rotation offering a competiive salary and shift premia. Due to the site location you will require access to a vehcile. MAIN PURPOSE OF JOB To ensure shift production targets are achieved in a safe and efficient manner and in compliance with company and regulatory standards (Quality, Environmental, Health and Safety) and industry accreditations (BRC and FEMAS). KEY TASKS: Operational To safely operate all the plant processes within a range of set parameters to ensure production targets are achieved in volume, quality and efficiency. To ensure all routine sampling and testing of the production processes are carried out and recorded as required. To ensure all assigned routine safety and preventative maintenance checks are undertaken as scheduled. To undertake general housekeeping and cleaning of the process areas. To assistance Maintenance Technicians in the event of plant failure. Compliance (Regulatory and Company) To comply with all the Health and Safety responsibilities as defined in the company Health and Safety policy. To ensure that company procedures and methods are adhered to. To ensure that quality, food and feed safety standards are maintained in accordance with relevant company procedures and documentation is accurately completed, and non-conformities reported. To ensure that production related waste is moved to designated disposal locations in a timely fashion. To ensure production areas are kept clean and tidy. To work with the rest of the site team highlighting opportunities for operational and business improvements. Reporting To record and report process data as requested e.g. the Daily Production spread sheet. To inform the Lead Technician of any specific issues requiring of further investigation. To submit Safety Issue Reports. QUALIFICATIONS / SKILLS Essential Knowledge and understanding of typical SCADA, Operator Interface control systems, and PLC based plant operations. Operational experience in a Processing and/or Manufacturing environment. Desirable Process, Chemical, or Mechanical Engineering education from City and Guilds, Higher National Certificate level and above. Due to the site location you will require access to a vehcile. Please note: This role will require working in an agricultural environment, with exposure to wheat, grain dust and other allergens. Interested? Please click apply.

Salary: £60,000p/a Additional uplift when working away Working weekends when traveling is double time Company Pension Scheme When traveling an upfront payment is made directly to cover meal expenses etc. (amount dependant on country of destination) Reporting to: Operations Manager Department: Service Department Location: Chesterfield based, with travel (UK & Overseas) Permanent Position Shifts: Chesterfield Workshop (Mon-Thurs 7.00am till 14.00pm & Fri 7.00 am till 11.00am) Traveling hours (Flexible) Generations are excited to be recruiting a Service engineer to join an innovative and industry-leading company with specialist expertise and experience in the design, manufacture, and installation of environmental machinery. Purpose of Role: To represent the Company in a positive manner, it is a proactive point of contact for customers and strive to develop and nurture client relationships. Work with customers at their premises, representing the Company, leading internal and external teams through the Servicing, maintaining and repairing our products. Be a technical reference point for all Products, feedback to our engineering teams and drive evolution. Help to drive a positive health and safety culture in every aspect of your role. To support the delivery of engineered and manufactured products by providing a programming, testing, fault finding and quality inspection service for full electrical control units and components in line with business requirements. Service Responsibilities & Duties: You will be part of the Projects and Services Teams involved in the breakdowns and servicing of equipment and systems supplied to our global customer s. You will be required to travel at short notice The position is a mixed office/shop/site role with regular overseas travel to perform service visits at customer facilities to troubleshoot and resolve electrical, mechanical, and software issues, and/or to handle scheduled maintenance tasks. Servicing, maintaining and repairing of electrical and mechanical equipment aimed at improving reliability and efficiency. Coordinate with the customer or third-party contractor to accomplish tasks. Provide training and useful information to customer representatives, operators, engineers, and management. Prepare all documentation related to on-site activities including site visit reports, marked up as built drawings, time sheets, and commissioning documents. Provide technical support to customers to resolve plant breakdown or reliability issues. Document any issues or product improvement ideas and present this information to the team. Occasionally remotely supporting customers will be required out of hours, this is due to the global time zones. Assist with the assembly and factory acceptance testing of products at our facility in the UK This role requires frequent and sometimes short notice travel to many parts of the world. It is expected that this could be up to 30-40% of your working time. Responsible for planning and booking your own travel to the destination required. When not traveling to customer site the Testing role below will be carried out in our Chesterfield workshop. Any reasonable work request to support the business needs. Testing Responsibilities & Duties: Setting up PLCs, HMIs to the required standard Testing electrical control units to ensure compliance with the required outputs Fault finding in the event of non-compliance of electrical controls and performing root cause analysis investigations to understand the failure mode Implementation of corrective and preventative actions to return the controls to required standard and outputs. Maintaining, supporting and upgrading hardware & software in line with business requirements Ensuring all work is completed in line with the business safe operating procedures providing no risk to H&S Complete all required electrical controls in line with production schedule, ensuring on time in full All work completed to the Quality standard requirements ensuring fully compliant work including but not limited to current safety regulations and external and internal quality standards Fully responsible for taking ownership for area of work, maintaining a safe as practically possible working environment ensuring good housekeeping, safe working practices and general workplace maintenance Environment, Health & Safety: In addition to the role Responsibilities, every employee has overall responsibility for: Taking reasonable care for your own Health and Safety and the Health and Safety of others who may be affected by your actions. Working with the Company to ensure a high standard of Environmental Health and Safety management by following the site EHS procedures. Ensuring compliance with all relevant quality standards/procedures in your area. This includes reporting any deviations from these standards/procedures, completing corrective actions and making recommendations to prevent similar deviations in the future. Maintains safe and clean working environment by enforcing procedures, rules, and regulations. Maintains product and company reputation by complying with applicable regulations. Qualifications & Experience: Time served (Engineering discipline Electrically biased) Min. 2 years electrical installation / service experience (mechanical experience would also be an advantage) ECS / CSCS Card (preferred) Min 5 GCSE s Grade C and above Experience in Plant / Cast House / heavy manufacturing Environments Computer literacy with MS Office, Outlook and Adobe software. Competent in reading both Electrical and Mechanical drawings essential Hydraulic experience (preferred) Comfortable and a basic understanding of computers/ computerized systems Basic knowledge of PLCs, HMIs, company s electrical hardware and software Ability to identify non-compliance

Demand planning experience Strong forecasting skills High level of commercial acumen Job Title: Demand Planner Salary : circa £50,000 to £60,000 Location: Hybrid - happy with coming in every other week to HQ in the NE About us Founded over 22 years ago our client has grown into one of the UK's leading businesses in their field delivering premium products and services to professionals and consumers worldwide, with ethical sourcing and excellence at the heart of everything we do.Recognised as one of the Sunday Times Best Places to Work in 2024, we foster a culture built on passion, creativity, and innovation. Our team has more than doubled in size over the recent years, and with over £20+ million in revenue last year, we're experiencing exceptional global expansion with continued growth ahead. About The Role As our first ever Demand Planner, you will sit at the heart of the business, connecting commercial ambition with operational reality across both UK and international markets. As we continue to expand into new territories, this role will provide a clear,joined-up view of demand by channel and by country, ensuring stock decisions are informed, planned and scalable. By improving forecast accuracy and forward visibility across multiple markets, the Demand Planner will enable better, faster decisions as the businessgrows internationally.Some of your key responsibilities will include: Demand Forecast Ownership - Develop, own and maintain a single, credible demand forecast across UK andinternational territories, by channel and product range, that the business can trust.- Build and manage a robust baseline forecast using historical sales data and trend analysis- Incorporate promotions, campaigns, NPD launches, growth targets and widermarket activity into forward-looking demand plans- Translate incomplete, conflicting and fast-moving commercial inputs into a clear, explainable view of demand- Make assumptions explicit, track forecast accuracy, and continuously improveforecast performance over time- Apply appropriate forecasting techniques (e.g. baseline forecasting, uplift modelling, scenario planning) suitable to a fast-growth, multi-SKU environment. Connecting Commercial Plans to Operational Reality - Partner closely with Commercial, Marketing, NPD, Finance and Operations to ensure demand is visible before key decisions are made- Challenge promotional activity and launch plans constructively using insight, data and scenario modelling- Enable the business to pursue growth opportunities by clearly highlighting tradeoffs, risks and operational implications- Ensure NPD forecasts are underpinned by realistic volume assumptions andmeasurable demand signals- Support margin understanding, where demand decisions impact profitability Demand Leadership within S&OP - Lead the demand side of the S&OP process, ensuring demand inputs are structured, forward-looking and decision-ready- Define what high-quality demand planning input looks like and embed this into business routines- Bring a joined-up demand view into forums to avoid reactive or backwards-looking- Work in partnership with the Operations Director to improve cadence, clarity and effectiveness of S&OP discussions- Help build a culture where decisions are made with foresight, not hindsight Building a Demand Planning Capability - Establish, embed and continuously improve the demand planning approach,ensuring it remains fit for purpose as the business scales.- Deliver clarity and consistency without over-engineering processes in a fast-growth environment- Work effectively and build on imperfect systems and spreadsheets- Define what "good" looks like today and shape how demand planning should evolve as the business scales- Avoid unclear forecasting and create a scalable, repeatable planning capability over time About You We're ideally looking for someone with:- Proven demand planning experience within a fast-growth, multi-sku, multi-channel environment.- Strong UK market expertise, with some exposure to international territories.- Ability to build and manage robust baseline forecast using sales data and trend analysis.- Experience partnering with cross-functional teams such as NPD, Marketing and Commercial to provide credible forecasts for product launches, and constructively challenging promotional and launch plans.- Ability to structure demand inputs into forward-looking, decision-ready outputs.- An analytical, structured, commercially aware individual, with the ability tocomfortably influence and challenge.Whilst the above describes the type of person we're looking for, we have great training and development capabilities, so even if you don't tick every point, we'd still love to hear from you. What's On Offer - Exciting career development opportunities within a fast-growing, award-winning business.- 25 days' annual leave plus public bank holidays, giving you time to rest and recharge.- 37.50 hours a week flexible 9-5 or 8-4 or 930-4.30- Private health insurance through Vitality, supporting your long-term health and wellbeing.- A healthcare cash plan to help with everyday healthcare costs.- An enhanced pension scheme with salary sacrifice options, helping you plan for the future.- A company-wide bonus scheme, recognising shared success. £2k annually- Death in service cover providing four times your salary for peace of mind.- Enhanced family leave and occupational sick pay, because looking after our team matters.- Access to our Employee Assistance Programme, offering confidential wellbeing and mental health support whenever you need it.- Paid volunteering days each year to support the causes that matter to you.

Location Canary Wharf or South Mimms, Hertfordshire About the job Job summary We are currently looking for an Infrastructure Engineer (EuC and telephony) to join our Technology & Services Operations Function within the Digital and Technology group. This is a full-time opportunity, on a permanent basis. The role will be based in 10 South Colonnade, Canary Wharf London, E14 4PU or South Mimms, Hertfordshire. Please be aware that this role can only be worked in the UK and not overseas. Government departments and agencies are working towards implementing a minimum 60% attendance in office sites. We are currently implementing a flexible, hybrid way of working, with a minimum of 8 days per month working on site to enable the collaboration and contact with partners and stakeholders needed to deliver MHRA business. Attendance on site is driven by business needs so depending on the nature of the role, this can flex up to 12 days a month, with the remainder of time worked either remotely or in the office. Some roles will need to be on site more regularly. This role will also be required to participate in the Agency's out of hours on-call rota on a periodic basis. An on-call payment will be added to the salary depending on the frequency of participation in the rota. A Digital Allowance of up to £12,823 per annum may be available for exceptional candidates based on our assessment of your skills and experience. This allowance is non-pensionable and may change on an annual basis. Job description Who are we? The Medicines and Healthcare products Regulatory Agency enhance and improve the health of millions of people every day through the effective regulation of medicines and medical devices, underpinned by science and research. The Digital and Technology Group (D&T) lies at the heart of the Agency and is responsible for delivering an optimised IT infrastructure and maximising the secure use of data to enable our scientists, inspectors, and the rest of the organisation to deliver world class services which can improve outcomes for patients and the general public. The Group was essential in the race to approve COVID-19 vaccines in 2020 and in supporting the UK to set up its own medicines and devices approvals systems following our exit from the EU. The work we do matters! We plan to be at the heart of one of the most digitally advanced medical regulators in the world and we need people who can help us deliver that ambition. D&T is a great place to build your career and we are committed to enabling our people to do the best work of their lives. The Technology & Service Operations function is responsible for managing the existing IT infrastructure including both software and hardware, databases, and other technology platforms; leading the support and maintenance of applications; development and testing of new applications and platforms; and cyber and information security for the Agency. What's the role? The Infrastructure Engineer will be responsible for assisting in the management and delivery of infrastructure projects and business-as-usual (BAU) tasks, focusing primarily on our End User Compute (EuC) and telephony infrastructure. This role is vital for maintaining the stability, performance, and security of the Infrastructure as the MHRA undertakes a significant overhaul of its IT infrastructure, including the deployment of new equipment. The successful candidate will apply their technical expertise in core Infrastructure technologies to support day-to-day operations. You will collaborate with other engineers to troubleshoot and resolve issues, contributing to continuous improvement initiatives. The role involves working closely with cross-functional teams to ensure that infrastructure activities align with overall IT strategy and operational objectives. An on-call component is required, as this role involves providing support for critical issues outside regular working hours, ensuring minimal disruption to services. Person specification Key responsibilities: Leadership and Escalation: Lead and manage the successful execution of EuC and telephony projects, ensuring that tasks are completed on time and within scope while supporting the MHRA's IT strategy. Serve as the main escalation point for junior engineers, providing advanced troubleshooting and technical expertise in resolving complex EuC and telephony issues, ensuring high-quality resolutions that prevent future incidents. Mentor and support junior engineers, fostering a collaborative environment and encouraging skills development across the team. Infrastructure Stability, Security, and Performance: Take ownership of the overall stability, performance, and security of our IT Infrastructure, which includes assisting in the management of data centre services such as blade systems, virtualisation platforms, servers, Storage, Backup and power systems. Implement and maintain robust security protocols to safeguard the infrastructure, ensuring compliance with security policies and regulatory requirements. Proactively monitor and assess core network performance, identifying potential risks or weaknesses and applying pre-emptive solutions to minimize downtime and service disruptions. Play a pivotal role in the agency's ongoing IT infrastructure overhaul by recommending, testing, and integrating cutting-edge infrastructure technologies. Collaboration and Stakeholder Management: Work closely with project teams, and other IT functions to ensure alignment of strategies with the overall IT infrastructure roadmap. Build productive relationships with external vendors, supporting the assessment of their services and products to meet the agency's performance and security expectations. Communicate project progress and EuC and telephony performance with team members to ensure that business requirements are consistently met. Business-as-Usual (BAU) Operations: Have a strong understanding of ITIL, including configuration, troubleshooting, and maintenance of Infrastructure components, ensuring smooth and uninterrupted service operations On-Call and Incident Management: Participate in the on-call rota, providing support for critical issues, and ensuring prompt response times to minimize business impact. Assist in incident response during escalations, supporting timely communication with key stakeholders and contributing to quick resolution. Learn from post-incident reports to understand preventive measures and support continuous improvement in incident management processes. Who are we looking for? Our successful candidate will have: Hands-on experience with troubleshooting EuC and telephony performance issues and integrating new equipment within an existing IT architecture. Experience in supporting Infrastructure operations, particularly in EuC and telephony technologies such as Intune and Autopilot. Technical knowledge of Infrastructure technologies, including an understanding of maintain laptop builds, patching management, application deployment technologies, remote management and diagnostics as well as Microsoft teams calling Proven experience in troubleshooting and maintenance, including experience in configuring and managing EuC and telephony Infrastructure components. Understanding of industry standards and best practices related to EuC and telephony Infrastructure architecture and security, including Directory Services understanding (such as AD/EntraID, LDAP, etc). If you would like to find out more about this fantastic opportunity, please read our Job Description and Person Specification ! Please note: The job description may not open in some internet browsers. Please use Chrome or Microsoft Edge. If you have any issue viewing the job description, please contact

Customer Service Specialist Customer Service Specialist The location of the role is Amersham (onsite) . The duration of the contract is 12 months . The pay rate on offer is 22 per hour (via PAYE). (37.5 hours per week) Preference for bilingual candidates - English and either Italian, French OR Spanish Key accountabilities of the role Establishing and maintaining effective communication with appropriate individuals throughout the process such as Regional Service Managers, Field Service Engineers, Service Sales, Finance and Sales teams Opening of service requests, dispatching corrective repairs/preventative maintenance work orders in a timely manner Invoicing of service interventions Dispute Handling Deep dive into stock discrepancies and follow up Physical Inventory support Activating contracts within in-house systems Work as part of a team and adopt a flexible approach to maintain and improve the quality of service To provide excellent customer service for customers, both internal and external Build close relationships with customers and commercial partners and respond to queries in a timely and professional manner. Provide knowledge and accurate information to customers. Ensure the above responsibilities are implemented in accordance with agreed service level and standard operating procedures. Experience, Skill requirements & qualifications Written and oral fluency in English (an additional European language Spanish, Italian, French preferably) Excellent communication and interpersonal skills Excellent organisational skills and ability to prioritise workload Problem solving skills, initiative, proactive / pre-emptive and strong attention to detail Competent MS Office skills and be comfortable working with different systems Previous client and customer service experience Ability to work well in a busy customer service environment Attention to detail and ability to prioritise Flexibility and willingness to work as a team member

Controls Systems Intergration Engineer- designs, develops, and maintains systems that automate industrial processes, ensuring optimal performance and safety. This is a fantastic opportunity to join our team, as a Controls Systems Intergration Engineer, you will be responsible for the full life cycle delivery of the project in both technical compliance and quality. Attending meetings with clients to discuss the design, surveys, software programming, configuration, testing and commissioning for projects. As a Controls Systems Intergration Engineer, you will bring an innovative approach to problem solving, you will be working with highly skilled engineers to help you develop and succeed in your career. The ideal candidate will have previous knowledge of PLC's, SCADA , HMI, variable speed drives and instrumentation products and experience in producing project documentation. Full-time position: 08:30-17:15 Monday to Thursday and 08:30-16:00 on Fridays. Role includes UK site commissioning (which may involve short periods away from home). What we require from you: Previous control system experience ( 2 years+ ) Software Engineering Degree and/or Electrical qualifications Experience with Allen Bradley, Siemens Mitsubishi PLC's or experience of SCADA systems like Wonderware, Iconics, Schneider or other platforms Good verbal and written communication skills Clean UK Driving License Must be eligible to work in the UK For Lead positions we would look for the ability to motivate and manage a team of engineers to improve performance (Must have over 5+ years experience) What you will get in return: Auto enrolment pension scheme (including Salary Sacrifice/Exchange for Pension Payments if desired) 25 days holiday (rising to 30 days after 5 years service) Private Health Scheme (after 1 year service) Sick pay (after 6 months service) Death in Service Plan (after 5 years service) Access to our Wellbeing programme operated through COGG () Access to 24/7 365 days confidential employee counselling service, free for employees and their families Access to our Training Hub (various training courses available) Annual Personal development and salary reviews Free parking at all our offices (Subject to availability & any company parking policies or parking rotas that may be in effect) Access to company vans or pool cars (company car scheme also available for senior roles) Access to Perkbox ( This gives employees access to discounted shopping, eating out, cinema and even holidays Free quarterly social events, team building days and Christmas party weekend break. TIL / Overtime and expenses scheme Our company At Adsyst Automation Ltd we understand that our continued success is down to our dedicated team, therefore, we invest time and effort in each individual; training and assisting with their personal and professional development, encouraging their strengths while offering a good work/ life balance. Adsyst Automation Ltd has been providing complex Control Systems for Process Control, Automation and Telemetry to customers worldwide for over 35 years. We approach each project with a fresh outlook and use our knowledge and partnerships to stay a step ahead of the competition, offering the most advanced, innovative and cost-effective solutions. At Adsyst Automation Ltd, we embrace diversity and actively seek individuals with unique perspectives to join our team. Our goal is to create a sustainable future by fostering a diverse environment where everyone can thrive. We value inclusion and are committed to providing equal opportunities for all, regardless of race, religion, gender, or background. Join us to contribute to our vibrant culture and make a difference! Other positions are available in this office, as well as our other offices within the UK. Please see our website for more information at:

Senior Office Technology Specialist - London (On-Site, Monday-Friday) Competitive salary plus excellent benefits A leading global professional services organisation is seeking an experienced Senior Office Technology Specialist to join its London Technology Operations team. This is a key position for someone who combines advanced audio-visual (AV) expertise with strong end-user technology support skills and a commitment to excellent client service. About the Role Senior Office Technology Specialist - London (On-Site, Monday-Friday) Competitive salary plus excellent benefits A leading global professional services organisation is seeking an experienced Senior Office Technology Specialist to join its London Technology Operations team. This is a key position for someone who combines advanced audio-visual (AV) expertise with strong end-user technology support skills and a commitment to excellent client service. About the Role The Senior OTS will focus on three core areas: Advanced AV Support Provide high-level support across client meeting rooms Manage and troubleshoot Zoom Rooms, Crestron, Poly and related equipment Support microphones, cameras, projectors and video conferencing systems Work with DSPs and control systems (Q-SYS, Crestron, AMX) Diagnose audio mixing and echo cancellation issues Provide end-to-end support for virtual and hybrid events, including town halls, webinars and internal meetings Tech Bar Operations Act as a senior escalation point within a walk-in Tech Bar environment Deliver professional, high-quality support to lawyers, business staff and clients Maintain excellent service standards and a client-focused approach Office Technology Support Provide deskside support for laptops, desktops, mobile devices and peripherals Assist with onboarding, device setup, office moves and general hardware support Liaise with internal teams and external vendors Manage hardware inventory, equipment procurement and disposal processes Maintain documentation, knowledge articles and technical procedures What They're Looking For Minimum 5 years' experience in IT support with strong AV system expertise Experience with Zoom Rooms, Crestron, Poly, Q-SYS, AMX or similar technologies Strong understanding of audio engineering fundamentals Experience supporting Windows, macOS, iOS and Android devices Proficient with enterprise applications and ticketing systems Excellent communication skills and a professional, client-service mindset Ability to work under pressure and support live meetings confidently Experience in a law firm or professional services environment is beneficial but not essential Role Details Location: London (full-time, on-site, Monday to Friday) Reporting structure: Part of the wider Technology Operations team, working closely with senior specialists and global technical teams Why Apply This is an excellent opportunity to join a respected organisation with a strong focus on technology, service quality and professional development. The role offers exposure to sophisticated AV systems, modern workplace technologies and a collaborative operational environment. If you are an experienced AV/IT support professional looking for your next step, we would be pleased to discuss the role further. Due to the high volume of applications, we are not able to respond to all enquiries. If you have not received a response within 72 hours, please assume you have not been shortlisted at this stage, however thank you for taking the time to apply. Ryder Reid Legal is a recruitment specialist. For over thirty years we've been connecting legal talent with many of the leading law firms in London and internationally. Follow our LinkedIn page for the latest vacancies.

Job Title: Design Engineer (Mechanical) Location: Plymouth, Devon with some hybrid working available for the right candidate Salary: Generous competitive salary to be discussed on application Hours: Core hours are Monday - Thursday 08:00-17:00 and Friday 08:00-14.00. Benefits: 28 days of holiday plus Bank Holidays, with the option to buy back up to 5 additional days, private medical package and contributory pension scheme, highly established and reputable business and friendly, welcoming, team orientated environment. The Company: We are working in partnership with a leading engineering firm who supply products to a range of industries including marine, defence, aerospace, nuclear, utilities and industrial. They are a well renowned company in their field involved with multiple scale projects across the UK. You will be joining an established and knowledgeable down to earth team. The Role: Work within the guidelines of the company Quality Management System Design Hydraulic Systems solutions in accordance with customers' requirements based incorporating the latest BS/ISO standards, PUWER and machinery directives etc Assist the Engineering Director in ensuring that the company's engineering standards are maintained to the highest level Ensure that all proposals put forward comply with the relevant statutory requirements and meet best practices as defined by the British Fluid Power Association Personally manage designated key projects Assume overall responsibility for the on-time completion of all engineering design projects, pre and post contract designated by the Engineering Director. Ensure that all Health & Safety requirements of the Company & its customers are met for all designated project related work. Complete Risk and method statements Provide technical advice & guidance to the Company's internal & external sales teams Interact with the Sales Department to ensure customer requirements are fully understood and relationships are maintained Support and help maintain the company drawing register Ensure all quotations submitted by the Design Department show at least the minimum gross margin agreed with the Directors Skills, experience, and knowledge requirements: Knowledge of hydraulic systems and industry standards preferable but not essential Electrical/electronic experience a benefit but not essential Thorough understanding of engineering practices and applications Recognised engineering accreditation HNC /HND or qualified engineering experience Commercial expertise to maximise financial returns Good understanding of current IT systems and their potential benefits to the organisation Good working knowledge of AutoCAD and or Solid works Competency Requirements: Good communication skills Energetic and self motivated Ability to motivate and lead a team of people Friendly & good humoured Attention to detail Good planning & time-management skills Next steps If you are interested in finding out more please call the office on for a confidential chat or email or Office Angels is an employment agency and business. We are an equal-opportunities employer who puts expertise, energy and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, abilities and more. By showcasing talents, skills and unique experiences in an inclusive environment, we help individuals thrive. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Office Angels acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Office Angels UK is an Equal Opportunities Employer. By applying for this role your details will be submitted to Office Angels. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Frontend Software Engineer - Remote Location: Remote/Manchester Contract Length: 8 Months Start: ASAP *Urgent 8 Month Contract* This is a *Manchester/Remote* based role with an excellent immediate start within a Global T echnology Client that is working to *collaborate with teams to improve product workflows and user experience* Overview: Our client seeks a Frontend Software Engineer to design, implement, and deploy modern web applications for KYC and compliance tooling. Strong knowledge of TypeScript and React required. Key Responsibilities: Own Front End delivery from requirement clarification to design, implementation, testing, and release. Build and evolve internal analyst-facing web applications using TypeScript, React/Next.js, Material UI, and Vue/Capla micro-frontends. Work on tool unification, workflow improvements, and case management enhancements across compliance-related systems. Integrate Front End applications with Back End services through GraphQL and REST APIs. Collaborate with engineers and stakeholders to identify optimal technical approaches for product and workflow challenges. Build maintainable, scalable, and user-friendly UIs focusing on performance, usability, accessibility, and security. Contribute to code quality, automated testing, and Front End engineering standards. Support monitoring and reliability across workflows via logs, metrics, dashboards, and alerts. Participate in incident support and contribute to reducing regressions and production issues. Mentor junior engineers through code reviews, pairing, and knowledge sharing. Required Skills: 4+ years of experience in building production-grade web applications. Strong experience with TypeScript and React. Familiarity with micro-Front End architectures and willingness to work with Vue/Capla. Proficient in integrating with GraphQL and REST APIs. Understanding of APIs and Front End-Back End interaction patterns. Some familiarity with Java or ability to comprehend Java service integrations. Experience with Front End testing across unit and integration levels; E2E testing experience is a plus. Comfortable working in CI/CD environments. Familiarity with cloud-native environments like Kubernetes, AWS, and observability practices. Strong communication skills, able to engage with both technical and non-technical stakeholders. Nice to Have: Background in fintech, compliance, or internal tooling. Interview Process: Live coding/code review interview. Team fit discussion. Ideal Candidate: Proactive and ownership-driven. Comfortable in a regulated environment. Please send your CV or call Toni to discuss further. We are an equal opportunities employment agency and welcome applications from all suitably qualified persons regardless of race, sex, disability, religion/belief, sexual orientation, or age. We champion differences in technology recruitment and work with clients who actively wish to diversify their talent force - ALL applicants are welcome to apply.

We believe in better. And we make it happen. Better content. Better products. And better careers. Working in Tech, Product or Data at Sky is about building the next and the new. From broadband to broadcast, streaming to mobile, SkyQ to Sky Glass, we never stand still. We optimise and innovate. We turn big ideas into the products, content and services millions of people love. And we do it all right here at Sky. This role provides" Product Management leadership for campaign execution and orchestration capabilities within Advertising Technology , underpinning how purchased advertising campaigns are prepared, delivered, monitored , and measured across Sky's linear, addressable, and digital platforms. The Product Manager will" define and evolve the product strategy "for this domain as part of the broader" AdFinity platform transformation , translating high-level strategic direction into a clear capability roadmap and product vision. The role is accountable for shaping the" future-state advertising technology products "responsible for asset lifecycle management, campaign orchestration, and operational visibility, while maintaining BAU stability across existing platforms during a period of significant transformation. A defining characteristic of this role is the requirement for" strategic product leadership combined with strong technical credibility . The Product Manager must be comfortable leading discovery, evaluating technology and vendor options where appropriate , and influencing senior stakeholders across Product, Architecture, Delivery and Sky Media. What you'll do Define and own the" product vision, strategy, and roadmap "for campaign execution, orchestration, and operational monitoring capabilities. Lead" product discovery and capability definition , identifying the future-state operating model for campaign management across AdTech . Translate strategic direction into" clear product capabilities, roadmaps, and measurable outcomes . Apply deep" advertising industry knowledge "to shape products that support real-world campaign delivery, trafficking, and optimisation workflows. Work closely with" CX teams "to embed operational insight, user journeys, and workflow improvements into product priorities. Partner with" Architecture and Engineering "to define modular, API-driven, cloud-based platform capabilities. Lead or contribute to" build vs buy assessments , vendor evaluations, and solution selection activities where required . Collaborate with" Product Owners / delivery leads "to ensure complex product intent is delivered effectively. Balance" BAU reliability with strategic modernisation "of legacy systems. Act as the" strategic voice of the product domain , influencing stakeholders and aligning teams around the long-term platform direction. What you'll bring Significant Product Management experience owning" platform-level or workflow-driven technology products . Experience" defining product strategy and capability roadmaps "in complex technical environments. Strong" AdTech, media, or broadcast industry experience , particularly across campaign execution, scheduling, trafficking, or delivery workflows. Technical fluency across" APIs, distributed systems, cloud infrastructure, and data pipelines . Experience working with" architects, engineers, CX and UX teams "to shape scalable product capabilities. Experience contributing to or leading" technology evaluation and build vs buy decision-making . Confidence influencing" senior stakeholders and cross-functional teams "in ambiguous or evolving environments. Ability to operate in" large-scale transformation programmes while maintaining operational stability . Team overview Content technology and innovation Our Content Technology and Innovation team delivers high-quality content to homes, customer devices, businesses and commercial partners across our European markets. With over 2500 colleagues from around the world, we combine our strategic insights, engineering know-how and operational excellence to use the most innovative technologies to create and distribute our award-winning content. The rewards There's one thing people can't stop talking about when it comes to : the perks . Here's a taster: Sky Q, for the TV you love all in one place The magic of Sky Glass at an exclusive rate A generous pension package Private healthcare Discounted mobile and broadband A wide range of Sky VIP rewards and experiences Inclusion & how you'll work We are a Disability Confident Employer, and welcome and encourage applications from all candidates. We will look to ensure a fair and consistent experience for all, and will make reasonable adjustments to support you where appropriate. Please flag any adjustments you need to your recruiter as early as you can. We've embraced hybrid working and split our time between unique office spaces and the convenience of working from home. You'll find out more about what hybrid working looks like for your role later on in the recruitment process. Your office space: Osterley: Our Osterley Campus is a 10-minute walk from Syon Lane train station. Or you can hop on one of our free shuttle buses that run to and from Osterley, Gunnersbury, Ealing Broadway and South Ealing tube stations. There's also plenty of bike shelters and showers. On campus, you'll find 13 subsidised restaurants, cafes, and a Waitrose. You can keep in shape at our subsidised gym, catch the latest shows and movies at our cinema, get your car washed and even get pampered at our beauty salon. We'd love to hear from you Inventive, forward-thinking minds come together to work in Tech, Product and Data at Sky. It's a place where you can explore what if, how far, and what next. But better doesn't stop at what we do, it's how we do it, too. We embrace each other's differences. We support our community and contribute to a sustainable future for our business and the planet. If you believe in better, we'll back you all the way. Just so you know: if your application is successful, we'll ask you to complete a criminal record check. And depending on the role you have applied for and the nature of any convictions you may have, we might have to withdraw the offer.