Expleo are actively recruiting for Development and Prototype Technicians to work within a state-of-the-art factory facility, with high performance road vehicles. Working within their highly experienced team, we are offering contract inside of IR35 opportunities, based in Surrey, where you will be working to assemble, maintain, prepare, and support the operation of, multi-project test and development vehicles and rigs. Please note Unsocial hours and frequent travel may be required as part of this role including regular off-site UK, European and occasional worldwide test support duties. Responsibilities: Build multi-project concept/mule/prototype and production level vehicles and simulation rigs to the highest standards, using specified processes where applicable. Preparation and operation of such vehicles for test and development activities at multiple locations, including industry proving grounds and racing circuits. Two-way interaction with design and engineering staff to establish and achieve requirements, specifications and targets. Knowledge, Skills & Experience: Extensive experience in motorsport/prototype/low volume/high performance complete vehicle builds, covering the manufacture, assembly and operating of such vehicles. Welding, machining and fabrication skills are preferred. Understanding of current automotive electrical and electronic systems to enable fault finding and repair would be advantageous. Experience of diagnostic platforms, especially MONaco, CANape and INCA is desirable. Clean driving licence & passport. IT literate in various packages e.g. Microsoft Office suite, Virtual Car. To make an application and to hear more about the roles available, please send your CV to (url removed) or call (phone number removed)
May 14, 2026
Contractor
Expleo are actively recruiting for Development and Prototype Technicians to work within a state-of-the-art factory facility, with high performance road vehicles. Working within their highly experienced team, we are offering contract inside of IR35 opportunities, based in Surrey, where you will be working to assemble, maintain, prepare, and support the operation of, multi-project test and development vehicles and rigs. Please note Unsocial hours and frequent travel may be required as part of this role including regular off-site UK, European and occasional worldwide test support duties. Responsibilities: Build multi-project concept/mule/prototype and production level vehicles and simulation rigs to the highest standards, using specified processes where applicable. Preparation and operation of such vehicles for test and development activities at multiple locations, including industry proving grounds and racing circuits. Two-way interaction with design and engineering staff to establish and achieve requirements, specifications and targets. Knowledge, Skills & Experience: Extensive experience in motorsport/prototype/low volume/high performance complete vehicle builds, covering the manufacture, assembly and operating of such vehicles. Welding, machining and fabrication skills are preferred. Understanding of current automotive electrical and electronic systems to enable fault finding and repair would be advantageous. Experience of diagnostic platforms, especially MONaco, CANape and INCA is desirable. Clean driving licence & passport. IT literate in various packages e.g. Microsoft Office suite, Virtual Car. To make an application and to hear more about the roles available, please send your CV to (url removed) or call (phone number removed)
Job title: Process Safety Lead Location: Royston, Hertfordshire, UK (hybrid working, 2 days per week at home) World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As a Site Process Safety Engineer, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As the Site Process Safety Lead, you will support the Site Process Safety Programme and associated strategy, improving and developing PSRM practices and systems efficiently and driving consistent behaviours and systematically controlling process safety risk and compliance at site. The role will be part of a core Engineering team within PGMS and you will be reporting to the Site Engineering Manager. We require a focus and delivery of all activities including and contributing to process safety, while supporting programme elements of process safety risk reduction personally for the site including implementation of the JM process safety policies to ensure compliance, reporting and analysis of core programme metrics to PGMS Leadership and JM Group Teams. The role: As a Site Process Safety Lead, you will help drive our goals by: Being a point of contact for the PGMS Site in relation to Process Safety Plan and associated strategy and help site drive PSRM activities. Owning and managing the local PGMS Process Safety Strategy. Supporting local Project Engineering and Management of Change teams with site based PSM Guidance and support. Manage and be the primary process safety resource for studies in the local site PHR and LOPA plan. Support in the delivery of Assurance Activities within local site. Regular engagement with Business PSM Team and Group PSM Team. Developing a local Process Safety Management Meeting with Site Manager and Site Engineering Manager. Supporting the site in the preparation and delivery of regulator inspections. Key skills that will help you succeed in this role: Knowledge/experience in Process Safety Management Previous experience working in a chemical or pharma industry Knowledge/experience in COMAH and working in an upper tier COMAH site Experience of managing a significant change in an organisation Competence in Microsoft Word, Excel and PowerPoint Decision making skills relating to Process Safety Assessments and associated escalation Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
May 14, 2026
Full time
Job title: Process Safety Lead Location: Royston, Hertfordshire, UK (hybrid working, 2 days per week at home) World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As a Site Process Safety Engineer, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As the Site Process Safety Lead, you will support the Site Process Safety Programme and associated strategy, improving and developing PSRM practices and systems efficiently and driving consistent behaviours and systematically controlling process safety risk and compliance at site. The role will be part of a core Engineering team within PGMS and you will be reporting to the Site Engineering Manager. We require a focus and delivery of all activities including and contributing to process safety, while supporting programme elements of process safety risk reduction personally for the site including implementation of the JM process safety policies to ensure compliance, reporting and analysis of core programme metrics to PGMS Leadership and JM Group Teams. The role: As a Site Process Safety Lead, you will help drive our goals by: Being a point of contact for the PGMS Site in relation to Process Safety Plan and associated strategy and help site drive PSRM activities. Owning and managing the local PGMS Process Safety Strategy. Supporting local Project Engineering and Management of Change teams with site based PSM Guidance and support. Manage and be the primary process safety resource for studies in the local site PHR and LOPA plan. Support in the delivery of Assurance Activities within local site. Regular engagement with Business PSM Team and Group PSM Team. Developing a local Process Safety Management Meeting with Site Manager and Site Engineering Manager. Supporting the site in the preparation and delivery of regulator inspections. Key skills that will help you succeed in this role: Knowledge/experience in Process Safety Management Previous experience working in a chemical or pharma industry Knowledge/experience in COMAH and working in an upper tier COMAH site Experience of managing a significant change in an organisation Competence in Microsoft Word, Excel and PowerPoint Decision making skills relating to Process Safety Assessments and associated escalation Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
This position is not suitable for a person who has allergies to materials such as glue, resins, oils, grease and hydraulic fluids. The role involves working with magnets or being in and around magnetic fields and heavy lifting. Responsibilities Skills Manual dexterity, soldering, crimp and use of general hand assembly tools. Read, interpret and work from engineering drawings, method sheets or samples. Use of process materials including resins, glues and curing systems and/or agents. Use of computerised assembly, test and stock control systems & peripheral equipment. Assembly of optical units, wiring looms, cables, electro mechanical assemblies and finished products adhering to Company documentation and to agreed QA standards. Ensure that the integrity and quality of the materials used in the process meet the required standards. Testing & Packing Test or calibration of assemblies using a range of Company bespoke processes; PC based, mechanical and manually operated equipment. Ensure the integrity & quality of the product passed to the next stage of the process. Packing operations ranging from bagging and labelling individual items to site kits containing multiple products and accessories into bespoke carry cases. General Working in all areas of production using a range of different processes. Handling process materials safely to prevent degradation. Health & Safety Comply with Company H&S procedures and legislation at all times. Identify any hazards, make safe and report as per Company H&S procedures. Ensure correct use and storage of PPE and RPE. Any additional duties deemed appropriate which are within the job holders capabilities. About You Assembly, test, packing and material handling processes. Optical assembly or detailed fine assembly work. Computer based processes. Mechanical and electronic processes. Use of documentation (bill of materials, assembly drawings). Health & Safety Working within a disciplined ISO9001 environment. Skills Good organisational skills. Ability to work on own initiative and to strict timescales. IT literate, good working knowledge of MS Excel, Word and Outlook. Company Competencies Communicating and Influencing Level 1. Drive and Determination Level 1. Problem Solving/Initiative Level 2. Technical/Functional Excellence Level 2. Planning and Business Performance Level 1. Skills Good organisational skills. Ability to work on own initiative and to strict timescales. IT literate, good working knowledge of MS Excel, Word and Outlook.
May 14, 2026
Full time
This position is not suitable for a person who has allergies to materials such as glue, resins, oils, grease and hydraulic fluids. The role involves working with magnets or being in and around magnetic fields and heavy lifting. Responsibilities Skills Manual dexterity, soldering, crimp and use of general hand assembly tools. Read, interpret and work from engineering drawings, method sheets or samples. Use of process materials including resins, glues and curing systems and/or agents. Use of computerised assembly, test and stock control systems & peripheral equipment. Assembly of optical units, wiring looms, cables, electro mechanical assemblies and finished products adhering to Company documentation and to agreed QA standards. Ensure that the integrity and quality of the materials used in the process meet the required standards. Testing & Packing Test or calibration of assemblies using a range of Company bespoke processes; PC based, mechanical and manually operated equipment. Ensure the integrity & quality of the product passed to the next stage of the process. Packing operations ranging from bagging and labelling individual items to site kits containing multiple products and accessories into bespoke carry cases. General Working in all areas of production using a range of different processes. Handling process materials safely to prevent degradation. Health & Safety Comply with Company H&S procedures and legislation at all times. Identify any hazards, make safe and report as per Company H&S procedures. Ensure correct use and storage of PPE and RPE. Any additional duties deemed appropriate which are within the job holders capabilities. About You Assembly, test, packing and material handling processes. Optical assembly or detailed fine assembly work. Computer based processes. Mechanical and electronic processes. Use of documentation (bill of materials, assembly drawings). Health & Safety Working within a disciplined ISO9001 environment. Skills Good organisational skills. Ability to work on own initiative and to strict timescales. IT literate, good working knowledge of MS Excel, Word and Outlook. Company Competencies Communicating and Influencing Level 1. Drive and Determination Level 1. Problem Solving/Initiative Level 2. Technical/Functional Excellence Level 2. Planning and Business Performance Level 1. Skills Good organisational skills. Ability to work on own initiative and to strict timescales. IT literate, good working knowledge of MS Excel, Word and Outlook.
Job Title: Electrical Design Engineer Location: Portsmouth Naval Base, Onsite We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £43,500 dependent on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: This role provides electrical design and integration support for the introduction of new systems and equipment across maritime platforms. It covers the full design lifecycle, from early feasibility and ship survey activities through to detailed electrical design and installation documentation. Core duties: Production of Installation Design Solutions including Electrical/System Drawings, Cable Routes, Data Sheets, Bills of Materials Liaison with MoD Customer and Industry Partners throughout Design process developing agreed Equipment Integration Requirements Undertake Ship Surveys supporting Design Integration, Material State Reports, Configuration Control and Power Load Charts Configuring and Maintaining Ship Databases for Electrical Power Distribution and Blown Fibre Networks Production of Ship and Equipment Feasibility Studies Collaborate with in-house Mechanical, Structural, HVAC and Project Management Teams Collaborate with Industry Partners and Technical Authorities Support Ship-build and Submarine electrical detailed design activities Provide technical input to Product Safety of Design Services deliverables Essential Skills: Knowledge of Electrical Systems theory Interpretation and application of Electrical Design Standards Working knowledge of Electrical Installation Practices and Electrical Distribution Systems Working knowledge/understanding of CAD/Engineering Drawing Toolsets IT literate in Microsoft Office applications ONC/HNC in Electrical Engineering or equivalent The Design Services - Electrical Team: Our Team of engineers is sourced from a combination of Industry, Armed Forces Service Leavers and our own BAE Apprenticeship Schemes. Working in tandem with our Structures & Outfit, HVAC, Mechanical & Piping and Safety Teams we provide through life electrical engineering support to all Royal Naval Surface Fleet, Royal Fleet Auxiliary and Submarine Platforms. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 14, 2026
Full time
Job Title: Electrical Design Engineer Location: Portsmouth Naval Base, Onsite We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £43,500 dependent on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: This role provides electrical design and integration support for the introduction of new systems and equipment across maritime platforms. It covers the full design lifecycle, from early feasibility and ship survey activities through to detailed electrical design and installation documentation. Core duties: Production of Installation Design Solutions including Electrical/System Drawings, Cable Routes, Data Sheets, Bills of Materials Liaison with MoD Customer and Industry Partners throughout Design process developing agreed Equipment Integration Requirements Undertake Ship Surveys supporting Design Integration, Material State Reports, Configuration Control and Power Load Charts Configuring and Maintaining Ship Databases for Electrical Power Distribution and Blown Fibre Networks Production of Ship and Equipment Feasibility Studies Collaborate with in-house Mechanical, Structural, HVAC and Project Management Teams Collaborate with Industry Partners and Technical Authorities Support Ship-build and Submarine electrical detailed design activities Provide technical input to Product Safety of Design Services deliverables Essential Skills: Knowledge of Electrical Systems theory Interpretation and application of Electrical Design Standards Working knowledge of Electrical Installation Practices and Electrical Distribution Systems Working knowledge/understanding of CAD/Engineering Drawing Toolsets IT literate in Microsoft Office applications ONC/HNC in Electrical Engineering or equivalent The Design Services - Electrical Team: Our Team of engineers is sourced from a combination of Industry, Armed Forces Service Leavers and our own BAE Apprenticeship Schemes. Working in tandem with our Structures & Outfit, HVAC, Mechanical & Piping and Safety Teams we provide through life electrical engineering support to all Royal Naval Surface Fleet, Royal Fleet Auxiliary and Submarine Platforms. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job title: EC&I Engineer Location: Royston, Hertfordshire, UK (Site based role) This role is a 24-month fixed term contract. World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an EC&I Engineer, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. Reporting into the Senior Electrical Engineer within the Royston Engineering team, the EC&I Engineer is responsible for providing second level technical support and expertise across a diverse range of industrial equipment. The role will drive implementation the delivery of EC&I improvement plans to ensure business needs both now and in the future are met. The role: As an EC&I Engineer, you will help drive our goals by: Ensures programmes are in place to manage compliance inspections across EC&I equipment on site (ATEX, Functional Safety, Gas Detection, Fire Alarms, Environmental Analysers, Fire Suppression, Test Equipment calibration etc). Provide second level technical support to the Maintenance shift teams to assist root cause analysis of complex plant EC&I breakdowns. Ownership of EC&I maintenance plans ensuring industry best practice is embedded across the plant. Ensure instrument loop calibrations are completed to satisfy ISO9001 and 14001 requirements. Working with the Senior Electrical Engineer, ensure contingency plans are in place to support site controls systems and instrumentation as well as the power distribution to meet the business/operational needs. Lead root cause analysis (RCA) of complex breakdowns of plant issues. Key skills that will help you succeed in this role: Minimum 3 years' experience in a similar role Experience managing maintenance of industrial EC&I equipment within a similar industry (chemical, pharma, food etc) Good understanding of maintenance techniques and their application Knowledge of applicable international standards (e.g., IEC 60079, IEC 61511) Experience working in a regulated environment (e.g., COMAH, Chemical, Oil & Gas etc.) is not essential but highly desirable Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
May 14, 2026
Full time
Job title: EC&I Engineer Location: Royston, Hertfordshire, UK (Site based role) This role is a 24-month fixed term contract. World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an EC&I Engineer, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. Reporting into the Senior Electrical Engineer within the Royston Engineering team, the EC&I Engineer is responsible for providing second level technical support and expertise across a diverse range of industrial equipment. The role will drive implementation the delivery of EC&I improvement plans to ensure business needs both now and in the future are met. The role: As an EC&I Engineer, you will help drive our goals by: Ensures programmes are in place to manage compliance inspections across EC&I equipment on site (ATEX, Functional Safety, Gas Detection, Fire Alarms, Environmental Analysers, Fire Suppression, Test Equipment calibration etc). Provide second level technical support to the Maintenance shift teams to assist root cause analysis of complex plant EC&I breakdowns. Ownership of EC&I maintenance plans ensuring industry best practice is embedded across the plant. Ensure instrument loop calibrations are completed to satisfy ISO9001 and 14001 requirements. Working with the Senior Electrical Engineer, ensure contingency plans are in place to support site controls systems and instrumentation as well as the power distribution to meet the business/operational needs. Lead root cause analysis (RCA) of complex breakdowns of plant issues. Key skills that will help you succeed in this role: Minimum 3 years' experience in a similar role Experience managing maintenance of industrial EC&I equipment within a similar industry (chemical, pharma, food etc) Good understanding of maintenance techniques and their application Knowledge of applicable international standards (e.g., IEC 60079, IEC 61511) Experience working in a regulated environment (e.g., COMAH, Chemical, Oil & Gas etc.) is not essential but highly desirable Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
Job Title: Electrical Design Engineer Location: Portsmouth Naval Base, Onsite We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £43,500 dependent on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: This role provides electrical design and integration support for the introduction of new systems and equipment across maritime platforms. It covers the full design lifecycle, from early feasibility and ship survey activities through to detailed electrical design and installation documentation. Core duties: Production of Installation Design Solutions including Electrical/System Drawings, Cable Routes, Data Sheets, Bills of Materials Liaison with MoD Customer and Industry Partners throughout Design process developing agreed Equipment Integration Requirements Undertake Ship Surveys supporting Design Integration, Material State Reports, Configuration Control and Power Load Charts Configuring and Maintaining Ship Databases for Electrical Power Distribution and Blown Fibre Networks Production of Ship and Equipment Feasibility Studies Collaborate with in-house Mechanical, Structural, HVAC and Project Management Teams Collaborate with Industry Partners and Technical Authorities Support Ship-build and Submarine electrical detailed design activities Provide technical input to Product Safety of Design Services deliverables Essential Skills: Knowledge of Electrical Systems theory Interpretation and application of Electrical Design Standards Working knowledge of Electrical Installation Practices and Electrical Distribution Systems Working knowledge/understanding of CAD/Engineering Drawing Toolsets IT literate in Microsoft Office applications ONC/HNC in Electrical Engineering or equivalent The Design Services - Electrical Team: Our Team of engineers is sourced from a combination of Industry, Armed Forces Service Leavers and our own BAE Apprenticeship Schemes. Working in tandem with our Structures & Outfit, HVAC, Mechanical & Piping and Safety Teams we provide through life electrical engineering support to all Royal Naval Surface Fleet, Royal Fleet Auxiliary and Submarine Platforms. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 13, 2026
Full time
Job Title: Electrical Design Engineer Location: Portsmouth Naval Base, Onsite We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £43,500 dependent on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: This role provides electrical design and integration support for the introduction of new systems and equipment across maritime platforms. It covers the full design lifecycle, from early feasibility and ship survey activities through to detailed electrical design and installation documentation. Core duties: Production of Installation Design Solutions including Electrical/System Drawings, Cable Routes, Data Sheets, Bills of Materials Liaison with MoD Customer and Industry Partners throughout Design process developing agreed Equipment Integration Requirements Undertake Ship Surveys supporting Design Integration, Material State Reports, Configuration Control and Power Load Charts Configuring and Maintaining Ship Databases for Electrical Power Distribution and Blown Fibre Networks Production of Ship and Equipment Feasibility Studies Collaborate with in-house Mechanical, Structural, HVAC and Project Management Teams Collaborate with Industry Partners and Technical Authorities Support Ship-build and Submarine electrical detailed design activities Provide technical input to Product Safety of Design Services deliverables Essential Skills: Knowledge of Electrical Systems theory Interpretation and application of Electrical Design Standards Working knowledge of Electrical Installation Practices and Electrical Distribution Systems Working knowledge/understanding of CAD/Engineering Drawing Toolsets IT literate in Microsoft Office applications ONC/HNC in Electrical Engineering or equivalent The Design Services - Electrical Team: Our Team of engineers is sourced from a combination of Industry, Armed Forces Service Leavers and our own BAE Apprenticeship Schemes. Working in tandem with our Structures & Outfit, HVAC, Mechanical & Piping and Safety Teams we provide through life electrical engineering support to all Royal Naval Surface Fleet, Royal Fleet Auxiliary and Submarine Platforms. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Pontoon is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. Job Title: Secure Document Controller - PMO & Information Management Location: Warwick / occasional travel to office Contract Type: 6 months contract with scope to extend Role Overview This role sits within a major infrastructure transformation programme and is responsible for the control, governance, and secure handling of sensitive, confidential, and encrypted project documentation and information. Working within a structured PMO and project controls environment, the Document Controller ensures that all programme information is correctly classified, securely managed, version-controlled, and fully auditable across the project lifecycle. This role is critical to maintaining information integrity, compliance, and governance standards across all project documentation, including regulated and protectively marked materials. Key Responsibilities Secure Document Control & Governance Manage the full lifecycle of controlled and sensitive programme documentation Ensure all documents are correctly classified, versioned, and securely stored Maintain strict adherence to document control procedures for protectively marked / confidential information Control document distribution, access permissions, and encryption compliance Ensure traceability of all document changes and approvals Information Management & PMO Support Maintain structured document repositories and controlled data environments (e.g. SharePoint / CDE platforms) Support PMO governance processes through accurate documentation control Maintain registers, logs, and information tracking systems (RAID, change logs, action trackers) Support audit readiness by ensuring all records are complete, consistent, and retrievable Data Integrity & Quality Assurance Conduct routine quality checks on documentation and data records Identify and resolve inconsistencies in document versions, metadata, and classification Escalate data integrity or compliance risks to PMO leadership Support continuous improvement of document control processes Secure Digital & BIM-Related Information Handling Coordinate secure submission, storage, and retrieval of digital project information Maintain controlled records relating to model/data submissions where applicable Track document/model status through review and approval workflows Ensure secure handling of digital outputs from design and engineering teams (This is coordination and control-focused - not technical BIM production) Stakeholder & Supplier Information Control Act as the primary point of contact for document control queries across project teams and suppliers Manage secure access requests and permissions for controlled systems Support onboarding/offboarding relating to information access rights Ensure external parties comply with programme information control standards Skills & Experience Essential Proven experience as a Document Controller in a project, programme, or infrastructure environment Strong understanding of secure document handling, confidentiality, and access control Experience working with controlled or sensitive information (e.g. protectively marked data) Strong knowledge of document management systems (SharePoint, Aconex, A-Site, or similar CDE platforms) High attention to detail and strong organisational discipline Experience maintaining version control, metadata standards, and audit trails Desirable Experience in regulated sectors (utilities, defence, rail, energy, construction) Familiarity with ISO 19650 information management principles Exposure to BIM/digital engineering information workflows (administrative support only) Experience supporting audits or compliance reviews Experience handling encrypted or security-controlled documentation environments Key Performance Indicators Accuracy and compliance of document classification and version control Timeliness of document processing and distribution Audit readiness of document repositories Reduction in document errors, duplication, or misclassification Compliance with secure information handling procedures Apply now! Please be advised: if you haven't heard from us within 48 hours, then unfortunately your application has not been successful on this occasion. We may, however, keep your details on file for any suitable future vacancies and contact you accordingly. We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention.
May 13, 2026
Contractor
Pontoon is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. Job Title: Secure Document Controller - PMO & Information Management Location: Warwick / occasional travel to office Contract Type: 6 months contract with scope to extend Role Overview This role sits within a major infrastructure transformation programme and is responsible for the control, governance, and secure handling of sensitive, confidential, and encrypted project documentation and information. Working within a structured PMO and project controls environment, the Document Controller ensures that all programme information is correctly classified, securely managed, version-controlled, and fully auditable across the project lifecycle. This role is critical to maintaining information integrity, compliance, and governance standards across all project documentation, including regulated and protectively marked materials. Key Responsibilities Secure Document Control & Governance Manage the full lifecycle of controlled and sensitive programme documentation Ensure all documents are correctly classified, versioned, and securely stored Maintain strict adherence to document control procedures for protectively marked / confidential information Control document distribution, access permissions, and encryption compliance Ensure traceability of all document changes and approvals Information Management & PMO Support Maintain structured document repositories and controlled data environments (e.g. SharePoint / CDE platforms) Support PMO governance processes through accurate documentation control Maintain registers, logs, and information tracking systems (RAID, change logs, action trackers) Support audit readiness by ensuring all records are complete, consistent, and retrievable Data Integrity & Quality Assurance Conduct routine quality checks on documentation and data records Identify and resolve inconsistencies in document versions, metadata, and classification Escalate data integrity or compliance risks to PMO leadership Support continuous improvement of document control processes Secure Digital & BIM-Related Information Handling Coordinate secure submission, storage, and retrieval of digital project information Maintain controlled records relating to model/data submissions where applicable Track document/model status through review and approval workflows Ensure secure handling of digital outputs from design and engineering teams (This is coordination and control-focused - not technical BIM production) Stakeholder & Supplier Information Control Act as the primary point of contact for document control queries across project teams and suppliers Manage secure access requests and permissions for controlled systems Support onboarding/offboarding relating to information access rights Ensure external parties comply with programme information control standards Skills & Experience Essential Proven experience as a Document Controller in a project, programme, or infrastructure environment Strong understanding of secure document handling, confidentiality, and access control Experience working with controlled or sensitive information (e.g. protectively marked data) Strong knowledge of document management systems (SharePoint, Aconex, A-Site, or similar CDE platforms) High attention to detail and strong organisational discipline Experience maintaining version control, metadata standards, and audit trails Desirable Experience in regulated sectors (utilities, defence, rail, energy, construction) Familiarity with ISO 19650 information management principles Exposure to BIM/digital engineering information workflows (administrative support only) Experience supporting audits or compliance reviews Experience handling encrypted or security-controlled documentation environments Key Performance Indicators Accuracy and compliance of document classification and version control Timeliness of document processing and distribution Audit readiness of document repositories Reduction in document errors, duplication, or misclassification Compliance with secure information handling procedures Apply now! Please be advised: if you haven't heard from us within 48 hours, then unfortunately your application has not been successful on this occasion. We may, however, keep your details on file for any suitable future vacancies and contact you accordingly. We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention.
Andy File Associates Limited is working as a Recruitment Agency on behalf of our client with regards this part time - permanent position. Administrative Assistant - Part-Time Salary: 12,694.50 - (phone number removed) Hours: Part-Time 22.5 hours per week (Flexible Hours Available) Location: Insert Location / Hybrid if applicable Reporting to: Operations Manager / Facilities Manager Role Overview Our client is a growing Facilities Management company looking for a reliable and organised Part-Time Administrative Assistant to support their operations team with a wide variety of administrative and project-based tasks. This is a flexible role suited to someone with strong attention to detail, good IT skills, and the ability to manage multiple tasks accurately and efficiently. The role will involve supporting ongoing projects, maintaining records, organising job documentation, and assisting with day-to-day administrative duties across the business. Key Responsibilities Match photographs of completed works to corresponding jobs and upload records accurately. Organise and maintain electronic job files and documentation. Support the operations team with general administration tasks. Update spreadsheets, databases, and internal systems. Assist with compiling reports and project information. Liaise with engineers, subcontractors, and office staff to obtain missing information where required. Help ensure completed job records are accurate and compliant. Assist with document control and filing. Provide ad hoc support on various operational and administrative projects. Person Specification Essential Skills & Experience Strong organisational skills and excellent attention to detail. Good computer literacy, including Microsoft Office (Excel, Outlook, Word). Ability to manage and prioritise workload independently. Strong communication skills, both written and verbal. Reliable, proactive, and able to work accurately with large volumes of information. Desirable Previous administration experience within facilities management, construction, maintenance, or property services. Experience working with job management or CAFM systems. Experience handling digital files, photos, and document management processes. What We Offer Flexible part-time hours Friendly and supportive working environment Opportunity to gain experience within the facilities management sector Potential for additional hours and career progression as the business grows
May 13, 2026
Full time
Andy File Associates Limited is working as a Recruitment Agency on behalf of our client with regards this part time - permanent position. Administrative Assistant - Part-Time Salary: 12,694.50 - (phone number removed) Hours: Part-Time 22.5 hours per week (Flexible Hours Available) Location: Insert Location / Hybrid if applicable Reporting to: Operations Manager / Facilities Manager Role Overview Our client is a growing Facilities Management company looking for a reliable and organised Part-Time Administrative Assistant to support their operations team with a wide variety of administrative and project-based tasks. This is a flexible role suited to someone with strong attention to detail, good IT skills, and the ability to manage multiple tasks accurately and efficiently. The role will involve supporting ongoing projects, maintaining records, organising job documentation, and assisting with day-to-day administrative duties across the business. Key Responsibilities Match photographs of completed works to corresponding jobs and upload records accurately. Organise and maintain electronic job files and documentation. Support the operations team with general administration tasks. Update spreadsheets, databases, and internal systems. Assist with compiling reports and project information. Liaise with engineers, subcontractors, and office staff to obtain missing information where required. Help ensure completed job records are accurate and compliant. Assist with document control and filing. Provide ad hoc support on various operational and administrative projects. Person Specification Essential Skills & Experience Strong organisational skills and excellent attention to detail. Good computer literacy, including Microsoft Office (Excel, Outlook, Word). Ability to manage and prioritise workload independently. Strong communication skills, both written and verbal. Reliable, proactive, and able to work accurately with large volumes of information. Desirable Previous administration experience within facilities management, construction, maintenance, or property services. Experience working with job management or CAFM systems. Experience handling digital files, photos, and document management processes. What We Offer Flexible part-time hours Friendly and supportive working environment Opportunity to gain experience within the facilities management sector Potential for additional hours and career progression as the business grows
Accounts Payable Assistant If you like working with numbers, keeping things accurate, and being part of a finance team that actually gets things done - this could be a role worth exploring. ABOUT HEPCOMOTION HepcoMotion is a long-established precision engineering company based in Tiverton, Devon, manufacturing and supplying linear motion and guidance systems used in automation equipment across a range of industries. They have a solid reputation built over decades, a team that knows its products inside out, and a finance function that plays an important role in keeping the business running smoothly. THE ROLE Reporting into the Finance Manager, you'll be supporting the day-to-day running of the accounts payable function. That means making sure supplier invoices are processed accurately and on time, payment runs go out without issues, and queries from suppliers and internal teams are dealt with promptly. The measure of success in this role is simple: accurate records, timely payments, and a purchase ledger that stays in good shape. YOU'LL: Process supplier invoices accurately and in line with company policies Code, authorise, and match invoices to purchase orders where applicable Monitor the purchase ledger and resolve invoice queries with suppliers and internal teams Prepare invoices for payment runs, making sure payments go out on time Manage the AP inbox, responding to supplier and internal queries professionally Maintain accurate, organised financial records and support audit requests Assist with ad-hoc finance tasks and cover for team members during absences Support improvements to AP processes and controls as the team evolves WHAT YOU'LL BRING Essential: Proven experience in a finance or accounts role Solid working knowledge of Microsoft Excel Strong attention to detail and a high level of accuracy Good communication skills comfortable working with suppliers and internal teams Well-organised, with the ability to juggle multiple tasks and hit deadlines Useful, not essential: Experience in a multi-entity or international business Familiarity with financial systems or ERP software BENEFITS Competitive salary up to £28,000 per annum 25 days holiday per annum, plus bank holidays Company contribution pension Healthcare cashback scheme Discounts with local shops and services Discounts at many major retailers including Argos, Currys, Halfords, Tesco, Sainsburys and Morrisons to name but a few Free on-site parking Career progression opportunities Continued professional learning and development Recommend a friend scheme Death in service after qualifying period Mental health support Financial wellness support Long service awards Seasonal events organised by HepcoMotion s social committee WORKING ARRANGEMENTS Location : Tiverton, Devon Contract: Permanent Full-time 35 hours per week Hours: Flexible between 8.00am and 5.00pm Hybrid: Available after an initial settling-in period, once you can work independently HOW TO APPLY If this sounds like a good fit, send over your CV and we'll take it from there. Not ready to apply just yet? Drop us a message with a few lines about your background and we can tell you more about the role first.
May 13, 2026
Full time
Accounts Payable Assistant If you like working with numbers, keeping things accurate, and being part of a finance team that actually gets things done - this could be a role worth exploring. ABOUT HEPCOMOTION HepcoMotion is a long-established precision engineering company based in Tiverton, Devon, manufacturing and supplying linear motion and guidance systems used in automation equipment across a range of industries. They have a solid reputation built over decades, a team that knows its products inside out, and a finance function that plays an important role in keeping the business running smoothly. THE ROLE Reporting into the Finance Manager, you'll be supporting the day-to-day running of the accounts payable function. That means making sure supplier invoices are processed accurately and on time, payment runs go out without issues, and queries from suppliers and internal teams are dealt with promptly. The measure of success in this role is simple: accurate records, timely payments, and a purchase ledger that stays in good shape. YOU'LL: Process supplier invoices accurately and in line with company policies Code, authorise, and match invoices to purchase orders where applicable Monitor the purchase ledger and resolve invoice queries with suppliers and internal teams Prepare invoices for payment runs, making sure payments go out on time Manage the AP inbox, responding to supplier and internal queries professionally Maintain accurate, organised financial records and support audit requests Assist with ad-hoc finance tasks and cover for team members during absences Support improvements to AP processes and controls as the team evolves WHAT YOU'LL BRING Essential: Proven experience in a finance or accounts role Solid working knowledge of Microsoft Excel Strong attention to detail and a high level of accuracy Good communication skills comfortable working with suppliers and internal teams Well-organised, with the ability to juggle multiple tasks and hit deadlines Useful, not essential: Experience in a multi-entity or international business Familiarity with financial systems or ERP software BENEFITS Competitive salary up to £28,000 per annum 25 days holiday per annum, plus bank holidays Company contribution pension Healthcare cashback scheme Discounts with local shops and services Discounts at many major retailers including Argos, Currys, Halfords, Tesco, Sainsburys and Morrisons to name but a few Free on-site parking Career progression opportunities Continued professional learning and development Recommend a friend scheme Death in service after qualifying period Mental health support Financial wellness support Long service awards Seasonal events organised by HepcoMotion s social committee WORKING ARRANGEMENTS Location : Tiverton, Devon Contract: Permanent Full-time 35 hours per week Hours: Flexible between 8.00am and 5.00pm Hybrid: Available after an initial settling-in period, once you can work independently HOW TO APPLY If this sounds like a good fit, send over your CV and we'll take it from there. Not ready to apply just yet? Drop us a message with a few lines about your background and we can tell you more about the role first.
You will be responsible for supporting Breedon's internal customers across a geographical patch for the various Breedon businesses to maintain the computer systems and networks. This will include installing and configuring computer systems, diagnosing hardware and software faults, and solving technical and application problems, either over the phone or in person to ensure users get maximum benefit. Key Responsibilities To regularly engage with your key customers and sites to proactively identify areas of improvement, as well as address any issues which may arise. To pro-actively build strong working relationships within the business to learn of up-and-coming events that could impact BTS and the service and systems we deliver, to enable action to be taken to support.Undertake general field support activities requiring the highest level of technical expertise and experience, covering all site\office-based technology such as PCs, Mobiles, Printers, Applications, Meeting room equipment, and all services that shall be defined within the Service Catalogue for the Workplace Services Service Tower. Produce and maintain relevant technical documentation for Services within Workplace Services. Proactively monitor systems and networks to identify potential issues. Application support and software installation. Talking users through a series of actions, either face-to-face or over the phone, to help set up systems or resolve issues. Troubleshoot system and network problems, diagnosing and solving hardware or software faults. Assist fellow engineers with more complex tasks such as cabling Replace faulty equipment as required. Respond within agreed time limits to call-outs. Work continuously on assigned tasks/helpdesk tickets to completion (or referral to third parties, if appropriate) within agreed SLAs. Support the roll-out of new applications, sites or decommissioning of sites as applicable. Proactively support company compliance to Health and Safety legislation through adherence to company polices, processes and practices. Work closely with all members of the BTS team across the group when required. Undertake any other activity as reasonably requested by management. Skills, Knowledge & Expertise Essential In depth knowledge and experience of Desktops, Laptops. Experience of Windows 10 and Windows 11. Office365 management and maintenance. Application support and software installs. Knowledge of servers, Networks LAN/WAN, including cloud hosted solutions. Knowledge of tablet/mobile phone support with both IOS and Android software. Knowledge of MDT (Microsoft Deployment Tools) for building laptops and desktops Knowledge of firewalls, proxies, and antivirus software. Ability to prioritise workload, be flexible in approach to problems and use own initiative to achieve results. Excellent communications skills, ability to communicate at all levels with professionalism, confidence, empathy and effectiveness. Take ownership and follow the lifecycle of each incident to ensure the correct resolution and monitor the outcome for effectiveness. Excellent team player Desirable Knowledge, experience, or qualification of the ITIL V4 Foundation qualification, its practices, processes, and framework. Knowledge of Sophos Antivirus software, Mimecast, PDQ, Logitech, and PowerShell. Knowledge or experience of the Excalibur software program. Knowledge of ManageEngine ServiceDesk Plus ticket logging system. Role Expectations The role is a field role so the postholder is required to be out on the road most of the time and as such, will need to hold a full UK/EU driving license. Due to the changing nature of the systems, we work with as well as the product range we operate with the postholder must be flexible in their approach to work/tasks and manage their work schedule accordingly. With this being a customer facing role delivering a service to our colleagues, the postholder is required to have a "can-do", positive/solution focused attitude and offer the highest level of customer service. Due to issues arising without notice, the postholder must be prepared to visit any sites across the group at short notice. As our business operates 24/7, there may be requirements to travel to and from sites either early or late in the day. Due to the geographic spread of our sites, there may be occasions where the distance to travel to and from the site(s) within the day is deemed unsafe from a health and wellbeing perspective, and therefore the postholder may be required to stay away from home on occasion. Job Benefits Car Allowance 25 days holiday plus bank holidays Contributory Pension Scheme Free on-site Parking Holiday Buy Scheme Volunteer Scheme Share Save Scheme Life Assurance Enhanced Maternity, Adoption & Paternity Scheme Health & Wellbeing Initiatives Discount Scheme
May 13, 2026
Full time
You will be responsible for supporting Breedon's internal customers across a geographical patch for the various Breedon businesses to maintain the computer systems and networks. This will include installing and configuring computer systems, diagnosing hardware and software faults, and solving technical and application problems, either over the phone or in person to ensure users get maximum benefit. Key Responsibilities To regularly engage with your key customers and sites to proactively identify areas of improvement, as well as address any issues which may arise. To pro-actively build strong working relationships within the business to learn of up-and-coming events that could impact BTS and the service and systems we deliver, to enable action to be taken to support.Undertake general field support activities requiring the highest level of technical expertise and experience, covering all site\office-based technology such as PCs, Mobiles, Printers, Applications, Meeting room equipment, and all services that shall be defined within the Service Catalogue for the Workplace Services Service Tower. Produce and maintain relevant technical documentation for Services within Workplace Services. Proactively monitor systems and networks to identify potential issues. Application support and software installation. Talking users through a series of actions, either face-to-face or over the phone, to help set up systems or resolve issues. Troubleshoot system and network problems, diagnosing and solving hardware or software faults. Assist fellow engineers with more complex tasks such as cabling Replace faulty equipment as required. Respond within agreed time limits to call-outs. Work continuously on assigned tasks/helpdesk tickets to completion (or referral to third parties, if appropriate) within agreed SLAs. Support the roll-out of new applications, sites or decommissioning of sites as applicable. Proactively support company compliance to Health and Safety legislation through adherence to company polices, processes and practices. Work closely with all members of the BTS team across the group when required. Undertake any other activity as reasonably requested by management. Skills, Knowledge & Expertise Essential In depth knowledge and experience of Desktops, Laptops. Experience of Windows 10 and Windows 11. Office365 management and maintenance. Application support and software installs. Knowledge of servers, Networks LAN/WAN, including cloud hosted solutions. Knowledge of tablet/mobile phone support with both IOS and Android software. Knowledge of MDT (Microsoft Deployment Tools) for building laptops and desktops Knowledge of firewalls, proxies, and antivirus software. Ability to prioritise workload, be flexible in approach to problems and use own initiative to achieve results. Excellent communications skills, ability to communicate at all levels with professionalism, confidence, empathy and effectiveness. Take ownership and follow the lifecycle of each incident to ensure the correct resolution and monitor the outcome for effectiveness. Excellent team player Desirable Knowledge, experience, or qualification of the ITIL V4 Foundation qualification, its practices, processes, and framework. Knowledge of Sophos Antivirus software, Mimecast, PDQ, Logitech, and PowerShell. Knowledge or experience of the Excalibur software program. Knowledge of ManageEngine ServiceDesk Plus ticket logging system. Role Expectations The role is a field role so the postholder is required to be out on the road most of the time and as such, will need to hold a full UK/EU driving license. Due to the changing nature of the systems, we work with as well as the product range we operate with the postholder must be flexible in their approach to work/tasks and manage their work schedule accordingly. With this being a customer facing role delivering a service to our colleagues, the postholder is required to have a "can-do", positive/solution focused attitude and offer the highest level of customer service. Due to issues arising without notice, the postholder must be prepared to visit any sites across the group at short notice. As our business operates 24/7, there may be requirements to travel to and from sites either early or late in the day. Due to the geographic spread of our sites, there may be occasions where the distance to travel to and from the site(s) within the day is deemed unsafe from a health and wellbeing perspective, and therefore the postholder may be required to stay away from home on occasion. Job Benefits Car Allowance 25 days holiday plus bank holidays Contributory Pension Scheme Free on-site Parking Holiday Buy Scheme Volunteer Scheme Share Save Scheme Life Assurance Enhanced Maternity, Adoption & Paternity Scheme Health & Wellbeing Initiatives Discount Scheme
Fire & Security Engineer ( Service / Remedials) Location: North Somerset (all work within 45 mins- 1 hour of base) Salary: 38,000- 42,000 basic + OT 1.5x + on-call payments ( 1 in 8 , 185) Hours: Mon-Fri, 08:00-17:00 Contract: Permanent, Full-time Ideally candidate will live no more than 30- 45 mins from main office The Role We're looking for a multi-disciplined Fire & Security Engineer (Grade 3) to join a growing business in North Somerset, Bristol . This is mainly service and remedial work role , with a strong focus on planned preventive maintenance (PPM) -no long-distance travel and no overnight stays . What you'll be doing Carrying out service, remedial and PPM visits across fire and security systems Working on systems including intruder alarms, fire alarms, access control and CCTV (IP & analogue) Ensuring works meet relevant British Standards and NSI requirements Accurately completing job paperwork / updates via CRM/PDA Taking part in an on-call rota (1 in 8) What we're looking for Time served engineer and/or IPAF ECS (or CSCS) card FIA qualified (preferred not essential) Ideally multi-disciplined across Fire & Security Good IT/admin ability (MS Office / job systems) and strong customer service Full UK driving licence Pay, on-call & benefits Basic: 38k- 42k On-call: 1 in 8 , with max average 1 call-out per week On-call payment: 185 per week when on-call Paid door-to-door (travel time paid) Overtime: time and a half after hours Company van provided 25 days holiday (plus bank holidays, if applicable) Power tools provided
May 13, 2026
Full time
Fire & Security Engineer ( Service / Remedials) Location: North Somerset (all work within 45 mins- 1 hour of base) Salary: 38,000- 42,000 basic + OT 1.5x + on-call payments ( 1 in 8 , 185) Hours: Mon-Fri, 08:00-17:00 Contract: Permanent, Full-time Ideally candidate will live no more than 30- 45 mins from main office The Role We're looking for a multi-disciplined Fire & Security Engineer (Grade 3) to join a growing business in North Somerset, Bristol . This is mainly service and remedial work role , with a strong focus on planned preventive maintenance (PPM) -no long-distance travel and no overnight stays . What you'll be doing Carrying out service, remedial and PPM visits across fire and security systems Working on systems including intruder alarms, fire alarms, access control and CCTV (IP & analogue) Ensuring works meet relevant British Standards and NSI requirements Accurately completing job paperwork / updates via CRM/PDA Taking part in an on-call rota (1 in 8) What we're looking for Time served engineer and/or IPAF ECS (or CSCS) card FIA qualified (preferred not essential) Ideally multi-disciplined across Fire & Security Good IT/admin ability (MS Office / job systems) and strong customer service Full UK driving licence Pay, on-call & benefits Basic: 38k- 42k On-call: 1 in 8 , with max average 1 call-out per week On-call payment: 185 per week when on-call Paid door-to-door (travel time paid) Overtime: time and a half after hours Company van provided 25 days holiday (plus bank holidays, if applicable) Power tools provided
Senior Civil Design Engineer Permanent Leeds, North England Competitive Salary + Car/Car Allowance + Flexible Benefits Summary: Are you an experienced Civil Engineer with a passion for civil engineering and the energy sector? Freedom Professional Services are seeking an individual with a strong technical expertise in a broad range of civil engineering disciplines to join our growing electricity transmission and distribution design team. With your strong technical expertise, you will be asked to lead the civil design of electricity substations across the UK from concept to completion and be able to work in close collaboration with other internal teams (electrical design, structural, surveys, wayleaves, cables, environmental), along with clients and stakeholders to ensure that all requirements are met. As a Senior Civil Engineer, you will have the opportunity to work on design frameworks for DNO's, as well as design and build opportunities for high profile clients and iconic projects, ensuring that all work is completed to the highest standard. You will be involved in every aspect of the project, from planning and cost estimation to construction and quality control. Some of the key deliverables in this role will include: Lead the production and review of engineering drawings engineering drawings, calculations, specifications, and reports for masonry buildings, steel portal frames, transformer bunds, drainage systems and roads, on projects ranging in construction contract value of £100K - £20M. Collaborate with clients and internal teams to ensure the effective delivery of projects, providing updates and identifying issues that could risk programme, quality or cost. Attend progress meetings as required at client/contractor offices or construction sites. Attend design team meetings to ensure the timely flow and release of quality information and to ensure that this information corresponds with the scope of works. Management of design risks to deliver buildable solutions. Provide engineering solutions to site-based problems through TQ/RFI process. Mentoring junior team members, providing technical guidance and promoting professional development Taking responsibility for your own professional development in line with current best practice, legislative changes, and customer requirements. We are looking for an experienced and ambitious civil engineer with the following attributes: A proven experience of working in a design environment for the construction of traditional masonry buildings, steel portal frames and reinforced concrete. Experience in client-facing roles, with the ability to manage client relationships effectively Ability to lead delivery of multiple simultaneous technical projects in a challenging environment. Strong communication skills to engage in technical discussions with colleagues, non-technical staff, and clients. Strong commitment to ongoing professional development and continuous learning You'll have a degree in Civil Engineering (or related subject) and be working toward Chartered or Incorporated status with a relevant professional body such as ICE. Desirable: Experience working within the electricity distribution sector, particularly in substation design and electrical infrastructure Practical experience with AutoCAD, Revit and Civils3D for civil engineering design Full UK driving licence. Benefits: We are always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Competitive salary Car or Car allowance 25 days holiday plus Bank Holidays Pension with a leading provider and employer contribution Sick Pay Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes Personal development programme. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be. LI-CN1
May 13, 2026
Full time
Senior Civil Design Engineer Permanent Leeds, North England Competitive Salary + Car/Car Allowance + Flexible Benefits Summary: Are you an experienced Civil Engineer with a passion for civil engineering and the energy sector? Freedom Professional Services are seeking an individual with a strong technical expertise in a broad range of civil engineering disciplines to join our growing electricity transmission and distribution design team. With your strong technical expertise, you will be asked to lead the civil design of electricity substations across the UK from concept to completion and be able to work in close collaboration with other internal teams (electrical design, structural, surveys, wayleaves, cables, environmental), along with clients and stakeholders to ensure that all requirements are met. As a Senior Civil Engineer, you will have the opportunity to work on design frameworks for DNO's, as well as design and build opportunities for high profile clients and iconic projects, ensuring that all work is completed to the highest standard. You will be involved in every aspect of the project, from planning and cost estimation to construction and quality control. Some of the key deliverables in this role will include: Lead the production and review of engineering drawings engineering drawings, calculations, specifications, and reports for masonry buildings, steel portal frames, transformer bunds, drainage systems and roads, on projects ranging in construction contract value of £100K - £20M. Collaborate with clients and internal teams to ensure the effective delivery of projects, providing updates and identifying issues that could risk programme, quality or cost. Attend progress meetings as required at client/contractor offices or construction sites. Attend design team meetings to ensure the timely flow and release of quality information and to ensure that this information corresponds with the scope of works. Management of design risks to deliver buildable solutions. Provide engineering solutions to site-based problems through TQ/RFI process. Mentoring junior team members, providing technical guidance and promoting professional development Taking responsibility for your own professional development in line with current best practice, legislative changes, and customer requirements. We are looking for an experienced and ambitious civil engineer with the following attributes: A proven experience of working in a design environment for the construction of traditional masonry buildings, steel portal frames and reinforced concrete. Experience in client-facing roles, with the ability to manage client relationships effectively Ability to lead delivery of multiple simultaneous technical projects in a challenging environment. Strong communication skills to engage in technical discussions with colleagues, non-technical staff, and clients. Strong commitment to ongoing professional development and continuous learning You'll have a degree in Civil Engineering (or related subject) and be working toward Chartered or Incorporated status with a relevant professional body such as ICE. Desirable: Experience working within the electricity distribution sector, particularly in substation design and electrical infrastructure Practical experience with AutoCAD, Revit and Civils3D for civil engineering design Full UK driving licence. Benefits: We are always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Competitive salary Car or Car allowance 25 days holiday plus Bank Holidays Pension with a leading provider and employer contribution Sick Pay Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes Personal development programme. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be. LI-CN1
Mechanical Design Engineer Permanent role Based in Ampthill Offering circa 50,000 Do you have experience using CREO? Do you have experience using Windchill? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Mechanical Design Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain high level MOD security clearance. You will be involved in: Use requirements specifications and a design brief to develop innovative yet robust design solutions Use CREO Parametric CAD to produce both concept and detail designs Produce supporting calculations and analysis to justify design decisions Work with SMEs, Users, and Design Authorities to develop concept design solutions Work with CAD engineers to enable the production of drawings and design data pack Create and present Design Review data packs to Senior Engineers and Governors Assist with the production of prototypes and confirm designs with manufacturing/purchasing teams Perform physical testing and design proving activities on engineering prototypes Ensure components and assemblies adhere to applicable, industry, and business standards Your skillset may include: Experience of working within the Defence, Aerospace, or Space domain Experience in the design and development of mechanical sub-systems and components Experience in the design and specification of electrical interfaces for sub-systems and components Understanding of current materials, treatments, and finishing technology for use in Defence, Aerospace, and Space products Working knowledge of CREO CAD software and experience using the tool to produce complex parametric designs Able to use Windchill PDM system Knowledge of complex mechanism design and principles Ability to perform basic structural and kinematic calculations If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Mechanical Design Engineer Permanent role Based in Ampthill Offering circa 50,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
May 13, 2026
Full time
Mechanical Design Engineer Permanent role Based in Ampthill Offering circa 50,000 Do you have experience using CREO? Do you have experience using Windchill? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Mechanical Design Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain high level MOD security clearance. You will be involved in: Use requirements specifications and a design brief to develop innovative yet robust design solutions Use CREO Parametric CAD to produce both concept and detail designs Produce supporting calculations and analysis to justify design decisions Work with SMEs, Users, and Design Authorities to develop concept design solutions Work with CAD engineers to enable the production of drawings and design data pack Create and present Design Review data packs to Senior Engineers and Governors Assist with the production of prototypes and confirm designs with manufacturing/purchasing teams Perform physical testing and design proving activities on engineering prototypes Ensure components and assemblies adhere to applicable, industry, and business standards Your skillset may include: Experience of working within the Defence, Aerospace, or Space domain Experience in the design and development of mechanical sub-systems and components Experience in the design and specification of electrical interfaces for sub-systems and components Understanding of current materials, treatments, and finishing technology for use in Defence, Aerospace, and Space products Working knowledge of CREO CAD software and experience using the tool to produce complex parametric designs Able to use Windchill PDM system Knowledge of complex mechanism design and principles Ability to perform basic structural and kinematic calculations If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Mechanical Design Engineer Permanent role Based in Ampthill Offering circa 50,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
May 13, 2026
Full time
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
Site Technical Architect - MUST HAVE SC CLEARANCE - Barrow in Furness, Cumbria - 2 months+/RATE: 595 per day inside IR35 One of our Blue Chip Clients is urgently looking for a Site Technical Architect. Please find some details below: CONTRACTOR MUST HOLD SC CLEARANCE + BE SOLE UK NATIONAL (Only UK nationality) MUST BE PAYE THROUGH UMBRELLA Role Description: The Site Technical Architect will lead the technical design, coordination, and delivery of on-site network infrastructure projects. This role focuses heavily on physical network environments, including comms rooms, structured cabling, copper and fibre containment, and the implementation of enterprise-grade Cisco networking solutions. The ideal candidate will bring deep hands-on experience across network hardware, storage platforms, UPS systems, and broader infrastructure components required to build and support resilient IT environments + ACI and ISE skills. Key responsibilities include: Lead the design, planning, and on-site implementation of network infrastructure projects. Oversee comms room layouts, rack design, patching schemes, cable management and end to end structured cabling requirements (copper and fibre). Produce and maintain High-Level and Low-Level Designs (HLD/LLD), installation standards, and technical documentation. Provide technical assurance across containment design, labelling, pathways, and compliance with site installation best practices. Assist engineers in configuration, deployment, and troubleshooting Cisco network equipment (switching, routing, wireless, Firewalls). Support integration of storage platforms, SAN/NAS equipment, and associated networking. Plan and coordinate UPS installations, power requirements, and resilience considerations in line with site design. Collaborate with project managers, engineers, suppliers, and security teams to ensure seamless delivery of infrastructure solutions. Conduct on-site assessments, surveys, and hardware audits to validate designs and implement improvements. Ensure solutions align with operational, security, and compliance standards. Liaise effectively with 3rd parties and suppliers, working with them to produce quotes and manage deliverables. Skills and Experience Required Strong technical background in enterprise network infrastructure and on-site implementation. Deep understanding of structured cabling (Cat5e/6/6a), fibre types, termination standards, containment, and patching systems. Hands-on experience with Cisco switching and routing technologies (IOS/NX-OS environments). Working knowledge of wireless technologies, VLANs, routing protocols, DHCP, DNS, and network segmentation. Experience working with storage systems (SAN/NAS) and their connectivity requirements. Familiarity with UPS technologies, power distribution, and environmental considerations for comms rooms. Ability to interpret and produce technical drawings, rack elevations, schematics, and wiring diagrams. Strong stakeholder communication skills and ability to lead technical discussions on-site. SC clearance mandatory. Desirable Experience in secure or regulated environments (defence, government, critical national infrastructure). Knowledge of ITSM processes (ServiceNow or similar). Understanding of datacentre standards and best practices (cooling, redundancy, monitoring). Certifications such as CCNA/CCNP, CompTIA Network+/Server+, or vendor specific cabling accreditation. Special Requirements Be a sole UK National. Please send CV for full details and immediate interviews. We are a preferred supplier to the client.
May 13, 2026
Contractor
Site Technical Architect - MUST HAVE SC CLEARANCE - Barrow in Furness, Cumbria - 2 months+/RATE: 595 per day inside IR35 One of our Blue Chip Clients is urgently looking for a Site Technical Architect. Please find some details below: CONTRACTOR MUST HOLD SC CLEARANCE + BE SOLE UK NATIONAL (Only UK nationality) MUST BE PAYE THROUGH UMBRELLA Role Description: The Site Technical Architect will lead the technical design, coordination, and delivery of on-site network infrastructure projects. This role focuses heavily on physical network environments, including comms rooms, structured cabling, copper and fibre containment, and the implementation of enterprise-grade Cisco networking solutions. The ideal candidate will bring deep hands-on experience across network hardware, storage platforms, UPS systems, and broader infrastructure components required to build and support resilient IT environments + ACI and ISE skills. Key responsibilities include: Lead the design, planning, and on-site implementation of network infrastructure projects. Oversee comms room layouts, rack design, patching schemes, cable management and end to end structured cabling requirements (copper and fibre). Produce and maintain High-Level and Low-Level Designs (HLD/LLD), installation standards, and technical documentation. Provide technical assurance across containment design, labelling, pathways, and compliance with site installation best practices. Assist engineers in configuration, deployment, and troubleshooting Cisco network equipment (switching, routing, wireless, Firewalls). Support integration of storage platforms, SAN/NAS equipment, and associated networking. Plan and coordinate UPS installations, power requirements, and resilience considerations in line with site design. Collaborate with project managers, engineers, suppliers, and security teams to ensure seamless delivery of infrastructure solutions. Conduct on-site assessments, surveys, and hardware audits to validate designs and implement improvements. Ensure solutions align with operational, security, and compliance standards. Liaise effectively with 3rd parties and suppliers, working with them to produce quotes and manage deliverables. Skills and Experience Required Strong technical background in enterprise network infrastructure and on-site implementation. Deep understanding of structured cabling (Cat5e/6/6a), fibre types, termination standards, containment, and patching systems. Hands-on experience with Cisco switching and routing technologies (IOS/NX-OS environments). Working knowledge of wireless technologies, VLANs, routing protocols, DHCP, DNS, and network segmentation. Experience working with storage systems (SAN/NAS) and their connectivity requirements. Familiarity with UPS technologies, power distribution, and environmental considerations for comms rooms. Ability to interpret and produce technical drawings, rack elevations, schematics, and wiring diagrams. Strong stakeholder communication skills and ability to lead technical discussions on-site. SC clearance mandatory. Desirable Experience in secure or regulated environments (defence, government, critical national infrastructure). Knowledge of ITSM processes (ServiceNow or similar). Understanding of datacentre standards and best practices (cooling, redundancy, monitoring). Certifications such as CCNA/CCNP, CompTIA Network+/Server+, or vendor specific cabling accreditation. Special Requirements Be a sole UK National. Please send CV for full details and immediate interviews. We are a preferred supplier to the client.
Role: Electrical Design Engineer Location: Portsmouth - On-site Salary: 40,000 - 43,500 depending on experience Electrical Design Engineer needed in Portsmouth to work on cutting edge systems within the marine industry. This role provides electrical design and integration support for the introduction of new systems and equipment across various marine vessels; from small boats to large ships & submersibles. What the role of the Electrical Design Engineer entails: Some of the main duties of the Electrical Design Engineer will include: Production of Installation Design Solutions including Electrical/System Drawings, Cable Routes, Data Sheets, Bills of Materials Liaison with MoD Customer and Industry Partners throughout Design process developing agreed Equipment Integration Requirements Undertake Ship Surveys supporting Design Integration, Material State Reports, Configuration Control and Power Load Charts Configuring and Maintaining Ship Databases for Electrical Power Distribution and Blown Fibre Networks Production of Ship and Equipment Feasibility Studies Collaborate with in-house Mechanical, Structural, HVAC and Project Management Teams Collaborate with Industry Partners and Technical Authorities Support Ship-build and Submarine electrical detailed design activities Provide technical input to Product Safety of Design Services deliverables What experience you need to be the successful Electrical Design Engineer: Knowledge of Electrical Systems theory Interpretation and application of Electrical Design Standards Working knowledge of Electrical Installation Practices and Electrical Distribution Systems Working knowledge/understanding of CAD/Engineering Drawing Toolsets IT literate in Microsoft Office applications ONC/HNC in Electrical Engineering or equivalent Benefits: Overtime, 14% combined pension contribution, 25 days holiday, free shares and more! Please note: Due to security restrictions we can only consider Sole UK Nationals for this position. This really is a fantastic opportunity for an Electrical Design Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
May 13, 2026
Full time
Role: Electrical Design Engineer Location: Portsmouth - On-site Salary: 40,000 - 43,500 depending on experience Electrical Design Engineer needed in Portsmouth to work on cutting edge systems within the marine industry. This role provides electrical design and integration support for the introduction of new systems and equipment across various marine vessels; from small boats to large ships & submersibles. What the role of the Electrical Design Engineer entails: Some of the main duties of the Electrical Design Engineer will include: Production of Installation Design Solutions including Electrical/System Drawings, Cable Routes, Data Sheets, Bills of Materials Liaison with MoD Customer and Industry Partners throughout Design process developing agreed Equipment Integration Requirements Undertake Ship Surveys supporting Design Integration, Material State Reports, Configuration Control and Power Load Charts Configuring and Maintaining Ship Databases for Electrical Power Distribution and Blown Fibre Networks Production of Ship and Equipment Feasibility Studies Collaborate with in-house Mechanical, Structural, HVAC and Project Management Teams Collaborate with Industry Partners and Technical Authorities Support Ship-build and Submarine electrical detailed design activities Provide technical input to Product Safety of Design Services deliverables What experience you need to be the successful Electrical Design Engineer: Knowledge of Electrical Systems theory Interpretation and application of Electrical Design Standards Working knowledge of Electrical Installation Practices and Electrical Distribution Systems Working knowledge/understanding of CAD/Engineering Drawing Toolsets IT literate in Microsoft Office applications ONC/HNC in Electrical Engineering or equivalent Benefits: Overtime, 14% combined pension contribution, 25 days holiday, free shares and more! Please note: Due to security restrictions we can only consider Sole UK Nationals for this position. This really is a fantastic opportunity for an Electrical Design Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Electrician Job post summary Pay: £45,000.00-£55,000.00 per year Job Description: About the Role We are looking for an experienced Electrician with strong work ethic to join our specialist team. This role is central to supporting our heat pump, air conditioning, and solar engineers. You will be responsible for electrical installations, fault-finding, and system integrations, ensuring high-quality service delivery across both traditional heating systems and renewable technologies. Key Responsibilities Carry out electrical installations, testing, and maintenance related to heating and renewable energy systems. Work closely with boiler, AC, heat pump, and solar engineers to provide electrical support. Plus if able to Install and configure heating controls, including: Training supplied so you will be able to wire Spurs, thermostats, S-plan, Y-plan, and full system wiring. Assist with electrical supplies and connections for: Electric boilers (liaising with suppliers and ensuring correct installs). Air conditioning units . Heat pumps . Solar PV systems (desirable but not essential). Diagnose and resolve electrical and control faults quickly and effectively. Ensure all work complies with BS 7671 (18th Edition Wiring Regulations) and relevant safety standards. Maintain accurate job documentation and communicate clearly with the wider team. Skills & Qualifications NVQ Level 3 in Electrical Installation or equivalent. 18th Edition Wiring Regulations certification. ECS/JIB card (preferred). Experience and full competence in wiring Familiarity with spurs, thermostats, S-plan, Y-plan, and full system wiring a bounus if not training will be supplied Inspection & Testing qualification (2391 or equivalent) desirable. Knowledge of electrical supplies for boilers, AC, heat pumps, and solar PV systems. Proven experience working in domestic and/or commercial environments. Full UK driving licence. Personal Attributes Reliable, self-motivated, and proactive. Able to collaborate effectively with heating, AC, and renewable engineers. Strong problem-solving ability and keen attention to detail. Customer-focused with excellent communication skills. Benefits Competitive salary package. Company vehicle & fuel card (if applicable). Tools, PPE, and uniform provided. Overtime and progression opportunities. Ongoing training in renewable technologies. Job Type: Full-time Benefits: Company car Employee mentoring programme Work Location: On the road
May 13, 2026
Full time
Electrician Job post summary Pay: £45,000.00-£55,000.00 per year Job Description: About the Role We are looking for an experienced Electrician with strong work ethic to join our specialist team. This role is central to supporting our heat pump, air conditioning, and solar engineers. You will be responsible for electrical installations, fault-finding, and system integrations, ensuring high-quality service delivery across both traditional heating systems and renewable technologies. Key Responsibilities Carry out electrical installations, testing, and maintenance related to heating and renewable energy systems. Work closely with boiler, AC, heat pump, and solar engineers to provide electrical support. Plus if able to Install and configure heating controls, including: Training supplied so you will be able to wire Spurs, thermostats, S-plan, Y-plan, and full system wiring. Assist with electrical supplies and connections for: Electric boilers (liaising with suppliers and ensuring correct installs). Air conditioning units . Heat pumps . Solar PV systems (desirable but not essential). Diagnose and resolve electrical and control faults quickly and effectively. Ensure all work complies with BS 7671 (18th Edition Wiring Regulations) and relevant safety standards. Maintain accurate job documentation and communicate clearly with the wider team. Skills & Qualifications NVQ Level 3 in Electrical Installation or equivalent. 18th Edition Wiring Regulations certification. ECS/JIB card (preferred). Experience and full competence in wiring Familiarity with spurs, thermostats, S-plan, Y-plan, and full system wiring a bounus if not training will be supplied Inspection & Testing qualification (2391 or equivalent) desirable. Knowledge of electrical supplies for boilers, AC, heat pumps, and solar PV systems. Proven experience working in domestic and/or commercial environments. Full UK driving licence. Personal Attributes Reliable, self-motivated, and proactive. Able to collaborate effectively with heating, AC, and renewable engineers. Strong problem-solving ability and keen attention to detail. Customer-focused with excellent communication skills. Benefits Competitive salary package. Company vehicle & fuel card (if applicable). Tools, PPE, and uniform provided. Overtime and progression opportunities. Ongoing training in renewable technologies. Job Type: Full-time Benefits: Company car Employee mentoring programme Work Location: On the road
Your main duty as a Senior Systems Engineer is to undertake work on Security & Fire Systems that mainly falls into the below categories: • Planned preventative maintenance/servicing of systems. • Installation of systems. • Repair of systems. • Leadership and on-site management of works. You are expected to hold and maintain high levels of service and always represent the goals and visions of the company. You are expected to perform the duties of a Systems Engineer as below: • Systems engineers will be a key point of contact for a number of customers, and be responsible for ensuring their security engineering needs are met. • Hold a high level of communication with operational staff regarding travel, jobs and issues. • Always stay professional and adhere to the companies Health, Safety, Welfare & Responsibilities policy. • Ensure Customer documentation is current and in good condition. • Always deliver excellent Customer Service. • Liaise with customers and operational staff to agree the best course of action. • Ability to work alone or as part of a team. • Maintain high levels of workmanship. • Take onboard advice and learn from engineers within the team. • Ensure your time is managed correctly. • Provide detailed and well written work reports. • Demonstrate a willingness to learn and develop. Some additional key duties and responsibilities as a Senior: • Feedback progress of engineers you are leading to operational management. • Ensure you are maintaining the balance of allowing those less experienced to lead at times while providing guidance when necessary. • Be the key point of contact for issues while on jobs and provide experienced insight to operational staff of potential problems on the horizon, if applicable. • Lead multiple member teams and sub-contractors, if necessary, while enforcing the high standard of work required by the company.
May 13, 2026
Full time
Your main duty as a Senior Systems Engineer is to undertake work on Security & Fire Systems that mainly falls into the below categories: • Planned preventative maintenance/servicing of systems. • Installation of systems. • Repair of systems. • Leadership and on-site management of works. You are expected to hold and maintain high levels of service and always represent the goals and visions of the company. You are expected to perform the duties of a Systems Engineer as below: • Systems engineers will be a key point of contact for a number of customers, and be responsible for ensuring their security engineering needs are met. • Hold a high level of communication with operational staff regarding travel, jobs and issues. • Always stay professional and adhere to the companies Health, Safety, Welfare & Responsibilities policy. • Ensure Customer documentation is current and in good condition. • Always deliver excellent Customer Service. • Liaise with customers and operational staff to agree the best course of action. • Ability to work alone or as part of a team. • Maintain high levels of workmanship. • Take onboard advice and learn from engineers within the team. • Ensure your time is managed correctly. • Provide detailed and well written work reports. • Demonstrate a willingness to learn and develop. Some additional key duties and responsibilities as a Senior: • Feedback progress of engineers you are leading to operational management. • Ensure you are maintaining the balance of allowing those less experienced to lead at times while providing guidance when necessary. • Be the key point of contact for issues while on jobs and provide experienced insight to operational staff of potential problems on the horizon, if applicable. • Lead multiple member teams and sub-contractors, if necessary, while enforcing the high standard of work required by the company.
Morson Edge is looking for a Boundary Cell Engineer to support new business requirements on the E-7 Wedgetail Aircraft. To work on behalf of our Aerospace clients. Our clients are innovators on a mission to connect, protect, explore and inspire. From the seabed to outer space, you will learn and grow contributing to work that shapes the world. Find your future with us. Our Clients are responsible for delivering several exciting contracts to our UK defence customers including new capabilities like the E-7 AEW&C and the P-8A Maritime Patrol Aircraft, Autonomous Systems, C4ISR Services, Support for the Chinook & Apache Fleets, Logistic Information Services and Training Services and are very much in a growth phase. Responsibilities: As the Boundary Cell you shall set up GOLDesp to encompass the full BOM/tooling etc of the new E-7 aircraft GOLDesp will be set up to enable full maintenance, repair and supply chain management (where applicable) for the E-7 aircraft. In your role, you shall: Set up of the E-7 Aircraft GOLDesp. Support to 201 ENG SQN in the population of Air System 'As Maintained' Structure Support to Progress Review WGs Ensure first time quality, requiring a high attention to detail. Basic Qualifications & Competencies: Able to obtain UK SC security clearance A clear communicator with a can-do attitude Proven ability to drive first time quality LIS (GOLDesp) Training Desirable Competences: MJDI experience If this position is of interest to you, please apply below or contact Alex for more information, (url removed)
May 13, 2026
Contractor
Morson Edge is looking for a Boundary Cell Engineer to support new business requirements on the E-7 Wedgetail Aircraft. To work on behalf of our Aerospace clients. Our clients are innovators on a mission to connect, protect, explore and inspire. From the seabed to outer space, you will learn and grow contributing to work that shapes the world. Find your future with us. Our Clients are responsible for delivering several exciting contracts to our UK defence customers including new capabilities like the E-7 AEW&C and the P-8A Maritime Patrol Aircraft, Autonomous Systems, C4ISR Services, Support for the Chinook & Apache Fleets, Logistic Information Services and Training Services and are very much in a growth phase. Responsibilities: As the Boundary Cell you shall set up GOLDesp to encompass the full BOM/tooling etc of the new E-7 aircraft GOLDesp will be set up to enable full maintenance, repair and supply chain management (where applicable) for the E-7 aircraft. In your role, you shall: Set up of the E-7 Aircraft GOLDesp. Support to 201 ENG SQN in the population of Air System 'As Maintained' Structure Support to Progress Review WGs Ensure first time quality, requiring a high attention to detail. Basic Qualifications & Competencies: Able to obtain UK SC security clearance A clear communicator with a can-do attitude Proven ability to drive first time quality LIS (GOLDesp) Training Desirable Competences: MJDI experience If this position is of interest to you, please apply below or contact Alex for more information, (url removed)
Liberty Personnel Services, Inc.
City Of Westminster, London
Electrical Power Project Manager (Switchgear / Transformers) Electrical Power Project Manager (Transformers / Switchgear) We are seeking an experienced Electrical Power Project Manager to lead the execution of complex power delivery projects supporting mission critical and utility scale infrastructure. This role is responsible for managing projects from order handoff through commissioning, ensuring technical accuracy, schedule adherence, cost control, and a strong safety culture. The ideal candidate brings deep familiarity with transformers, switchgear, and electrical power distribution systems and thrives in fast paced, integrated delivery environments. Key Responsibilities Manage end to end execution of electrical power projects involving power transformers, switchgear, substations, and associated balance of plant equipment. Serve as the primary point of contact for customers, engineering, manufacturing, vendors, and field teams throughout the project lifecycle. Coordinate engineering deliverables, procurement activities, manufacturing schedules, logistics, installation, and commissioning. Review and interpret electrical one lines, schematics, specifications, and construction documents to ensure scope alignment and technical compliance. Control project schedules, budgets, change orders, RFIs, and risk mitigation plans. Lead project meetings, progress reporting, and customer updates with a high degree of professionalism and technical credibility. Ensure all work complies with applicable NEC, IEEE, NEMA, ANSI, and site specific safety requirements. Support factory acceptance testing (FAT), site acceptance testing (SAT), and energization activities. Drive continuous improvement in execution processes, quality, and customer satisfaction. Key Qualifications Bachelor's degree in Electrical Engineering, Construction Management, or related field, or equivalent hands on experience in electrical power systems. 5+ years of experience in electrical power project management, engineering, construction, or maintenance. Strong background in mission critical electrical power distribution systems, including: Power transformers (medium and high voltage) Switchgear and substations ATS / STS systems Experience supporting data centers, utilities, industrial facilities, or critical infrastructure projects. Hyperscale data center or utility scale power experience strongly preferred. Proven ability to manage multiple projects simultaneously in a matrixed environment. Strong problem solving skills with the ability to resolve technical, schedule, and commercial challenges. Advanced proficiency in Microsoft Office (Excel, Word, Outlook, PowerPoint). Excellent written and verbal communication skills. Supervisory & Leadership Responsibilities Directly supervise and mentor up to five project or technical team members. Provide performance feedback, coaching, and professional development support. Identify skills gaps and coordinate training needs in collaboration with leadership and HR. Foster a collaborative, accountable, and safety focused team culture. What You'll Be Part Of Execution of critical power infrastructure projects that support data centers, utilities, and industrial operations. A safety first organization with high engineering and quality standards. A technically driven environment where project managers are trusted decision makers. Opportunities to work on high visibility, high impact transformer and power delivery programs.
May 13, 2026
Full time
Electrical Power Project Manager (Switchgear / Transformers) Electrical Power Project Manager (Transformers / Switchgear) We are seeking an experienced Electrical Power Project Manager to lead the execution of complex power delivery projects supporting mission critical and utility scale infrastructure. This role is responsible for managing projects from order handoff through commissioning, ensuring technical accuracy, schedule adherence, cost control, and a strong safety culture. The ideal candidate brings deep familiarity with transformers, switchgear, and electrical power distribution systems and thrives in fast paced, integrated delivery environments. Key Responsibilities Manage end to end execution of electrical power projects involving power transformers, switchgear, substations, and associated balance of plant equipment. Serve as the primary point of contact for customers, engineering, manufacturing, vendors, and field teams throughout the project lifecycle. Coordinate engineering deliverables, procurement activities, manufacturing schedules, logistics, installation, and commissioning. Review and interpret electrical one lines, schematics, specifications, and construction documents to ensure scope alignment and technical compliance. Control project schedules, budgets, change orders, RFIs, and risk mitigation plans. Lead project meetings, progress reporting, and customer updates with a high degree of professionalism and technical credibility. Ensure all work complies with applicable NEC, IEEE, NEMA, ANSI, and site specific safety requirements. Support factory acceptance testing (FAT), site acceptance testing (SAT), and energization activities. Drive continuous improvement in execution processes, quality, and customer satisfaction. Key Qualifications Bachelor's degree in Electrical Engineering, Construction Management, or related field, or equivalent hands on experience in electrical power systems. 5+ years of experience in electrical power project management, engineering, construction, or maintenance. Strong background in mission critical electrical power distribution systems, including: Power transformers (medium and high voltage) Switchgear and substations ATS / STS systems Experience supporting data centers, utilities, industrial facilities, or critical infrastructure projects. Hyperscale data center or utility scale power experience strongly preferred. Proven ability to manage multiple projects simultaneously in a matrixed environment. Strong problem solving skills with the ability to resolve technical, schedule, and commercial challenges. Advanced proficiency in Microsoft Office (Excel, Word, Outlook, PowerPoint). Excellent written and verbal communication skills. Supervisory & Leadership Responsibilities Directly supervise and mentor up to five project or technical team members. Provide performance feedback, coaching, and professional development support. Identify skills gaps and coordinate training needs in collaboration with leadership and HR. Foster a collaborative, accountable, and safety focused team culture. What You'll Be Part Of Execution of critical power infrastructure projects that support data centers, utilities, and industrial operations. A safety first organization with high engineering and quality standards. A technically driven environment where project managers are trusted decision makers. Opportunities to work on high visibility, high impact transformer and power delivery programs.
