Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on qualifications and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies Production of high-quality submissions including hazard logs, safety cases and safety plans Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 30th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on qualifications and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies Production of high-quality submissions including hazard logs, safety cases and safety plans Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 30th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior Mechanical Engineer Location: Coventry. This is an onsite position Salary: Competitive What you'll be doing: In this role you will be joining a newly formed Mechanical Engineering team within a new office based in Coventry. The goal of this team with be to help deliver crucial ship services, crew life support capabilities and equipment and componentry for the current and next generation of Nuclear Submarine. This role will involved with supporting the design and development of various critical systems of the SSN AUKUS. You will be expected to lead and develop various mechanical engineering systems, equipment and components The successful candidate will connect and build relationships with suppliers to ensure that equipment and component specifications challenging demands Working directly with the customer to develop requirements and acceptance criteria based on operational scenarios, use cases and other design considerations Taking lead for performing and reviewing engineering calculations and analysis to make decisions and demonstrate system performance Co-ordinating, managing and helping influence a wide stakeholder base to solve complex engineering problems and make responsible engineering decisions Your skills and experiences: Essential: Mechanical Engineering background in Rotator Machinery, Components or Fluid Dynamics Demonstrable experience in applying mechanical engineering for various products along woth different stages of a product lifecycle Ability to prioritise workload and ability to work well within a cross functional team A passion for problem solving and resolving complex engineering calculations Educated to degree level in Engineering, Mechanical or Science subjects Desirable: Leadership /Mentoring experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Systems team: As either the Senior Mechanical Engineer within out Platform Systems team you will the opportunity to join a brand new team being created within our new site in Coventry where you will be working with other passionate engineers to bring a new way of thinking into the design of our Submarines. In this role you will have the opportunity to develop and mentor junior members of staff and build on technical skillsets. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 10th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Senior Mechanical Engineer Location: Coventry. This is an onsite position Salary: Competitive What you'll be doing: In this role you will be joining a newly formed Mechanical Engineering team within a new office based in Coventry. The goal of this team with be to help deliver crucial ship services, crew life support capabilities and equipment and componentry for the current and next generation of Nuclear Submarine. This role will involved with supporting the design and development of various critical systems of the SSN AUKUS. You will be expected to lead and develop various mechanical engineering systems, equipment and components The successful candidate will connect and build relationships with suppliers to ensure that equipment and component specifications challenging demands Working directly with the customer to develop requirements and acceptance criteria based on operational scenarios, use cases and other design considerations Taking lead for performing and reviewing engineering calculations and analysis to make decisions and demonstrate system performance Co-ordinating, managing and helping influence a wide stakeholder base to solve complex engineering problems and make responsible engineering decisions Your skills and experiences: Essential: Mechanical Engineering background in Rotator Machinery, Components or Fluid Dynamics Demonstrable experience in applying mechanical engineering for various products along woth different stages of a product lifecycle Ability to prioritise workload and ability to work well within a cross functional team A passion for problem solving and resolving complex engineering calculations Educated to degree level in Engineering, Mechanical or Science subjects Desirable: Leadership /Mentoring experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Systems team: As either the Senior Mechanical Engineer within out Platform Systems team you will the opportunity to join a brand new team being created within our new site in Coventry where you will be working with other passionate engineers to bring a new way of thinking into the design of our Submarines. In this role you will have the opportunity to develop and mentor junior members of staff and build on technical skillsets. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 10th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Mechanical Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55k What you'll be doing: Design of multiple platform systems, sub-systems and equipment for the next generation Royal Navy submarines Undertake functional design activities, modelling and analysis Produce design documentation, Verification & Validation evidence and safety justifications Support specification qualification and procurement of components, working collaboratively with suppliers Engaging with stakeholders across the cross-functional project team Driving engineering governance through peer reviews and design reviews Your skills and experiences: Essential: Proven capability in system lifecycle delivery - from concept through to commissioning Demonstrated leadership - either through technical direction, mentoring, or project ownership Degree Level Qualification or Chartered engineer or working towards professional accreditation. Mechanical Engineering background in Rotator Machinery, Components or Fluid Dynamics. Desirable: Knowledge of platform-level constraints such as noise, shock, or survivability Previous experience integrating purification systems with submarine life-support, HVAC, and emergency protocols Experience in the design of gas scrubbing, filtration, and environmental control systems (e.g. CO removal, O generation, trace contaminant management , radiological hazards) - ideally in complex , safety-critical environments (e.g. maritime, aerospace, defence, nuclear, oil & gas and sub-sea) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering team: As a Lead Mechanical Engineer - Air Purification Systems, you will play a pivotal role in the design and development of submarine Air Purification and Atmosphere Monitoring systems. This includes system-level design, technical leadership , supplier engagement, and the opportunity to steer design architecture across a major submarine programme. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Principal Mechanical Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55k What you'll be doing: Design of multiple platform systems, sub-systems and equipment for the next generation Royal Navy submarines Undertake functional design activities, modelling and analysis Produce design documentation, Verification & Validation evidence and safety justifications Support specification qualification and procurement of components, working collaboratively with suppliers Engaging with stakeholders across the cross-functional project team Driving engineering governance through peer reviews and design reviews Your skills and experiences: Essential: Proven capability in system lifecycle delivery - from concept through to commissioning Demonstrated leadership - either through technical direction, mentoring, or project ownership Degree Level Qualification or Chartered engineer or working towards professional accreditation. Mechanical Engineering background in Rotator Machinery, Components or Fluid Dynamics. Desirable: Knowledge of platform-level constraints such as noise, shock, or survivability Previous experience integrating purification systems with submarine life-support, HVAC, and emergency protocols Experience in the design of gas scrubbing, filtration, and environmental control systems (e.g. CO removal, O generation, trace contaminant management , radiological hazards) - ideally in complex , safety-critical environments (e.g. maritime, aerospace, defence, nuclear, oil & gas and sub-sea) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering team: As a Lead Mechanical Engineer - Air Purification Systems, you will play a pivotal role in the design and development of submarine Air Purification and Atmosphere Monitoring systems. This includes system-level design, technical leadership , supplier engagement, and the opportunity to steer design architecture across a major submarine programme. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on qualifications and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies Production of high-quality submissions including hazard logs, safety cases and safety plans Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 30th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on qualifications and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies Production of high-quality submissions including hazard logs, safety cases and safety plans Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 30th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-in-Furness. This position will require a full-time presence on-site Salary: Competitive What you'll be doing: Developing the package of design evidence required to justify a safe, effective design and generate customer confidence in the design solution Specifying and assisting in the build of prototypes, products and systems suitable for testing Providing timely corrective actions on all assigned defects and issues Ensuring that commitments are agreed, reviewed and met Mentoring junior engineers regarding technical matters Making presentations effectively to technical and management audiences and within this, be able to identify and keep abreast of novel technical concepts and markets Author/co-author technical reports, papers, articles, patents and presentations as required Your skills and experiences: Educated to degree level in Engineering, Mechanical or Science subjects Be able to design documentation with the ability to present these to customers and wider groups Have the ability to solve complex engineering calculations Be proficient in CAD, MS Office and be comfortable with other IT applications Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Platform Systems team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 6th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-in-Furness. This position will require a full-time presence on-site Salary: Competitive What you'll be doing: Developing the package of design evidence required to justify a safe, effective design and generate customer confidence in the design solution Specifying and assisting in the build of prototypes, products and systems suitable for testing Providing timely corrective actions on all assigned defects and issues Ensuring that commitments are agreed, reviewed and met Mentoring junior engineers regarding technical matters Making presentations effectively to technical and management audiences and within this, be able to identify and keep abreast of novel technical concepts and markets Author/co-author technical reports, papers, articles, patents and presentations as required Your skills and experiences: Educated to degree level in Engineering, Mechanical or Science subjects Be able to design documentation with the ability to present these to customers and wider groups Have the ability to solve complex engineering calculations Be proficient in CAD, MS Office and be comfortable with other IT applications Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Platform Systems team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 6th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Principal Backend Engineer - Java Location: London (Hybrid) | Type: Permanent The Role Capco is growing our Engineering team - and we're looking for experienced Principal Backend Engineers with strong Java skills and a passion for delivering innovative solutions in financial services. If you enjoy solving complex problems, working with cloud-native technologies, and collaborating in agile teams, we'd love to hear from you. As a Principal Backend Engineer at Capco, you'll contribute to high-impact, client-facing projects that shape the future of financial services. You'll work alongside talented engineers, have access to industry-leading training, and get the opportunity to grow your skills across multiple platforms. You will also get the chance to work across different domains within FS & Energy. What You'll Do Build and deliver scalable Back End services using Java (11, 17+) Design and implement APIs and microservices for enterprise systems Work across cloud platforms, particularly AWS, using best practice deployment techniques Contribute to architecture discussions and solution design Develop robust test coverage including unit, integration, and performance testing Collaborate in agile teams alongside clients, product managers, and other engineers What We're Looking For Java Development - Expertise in Java 11, 17 and above. Spring Boot - Proficiency with the Spring Boot framework. Cloud Services - Deep understanding of deploying enterprise level software into any public cloud, preferably AWS. Architecture Patterns - Experience implementing microservices, event-driven, CQRS and cloud-native architectures. CI/CD - Strong understanding of CI/CD pipelines, particularly within the AWS ecosystem. Database Management - Proficiency in both SQL and NoSQL databases. Message Brokers - Experience with Kafka. Testing - Ability to write various types of tests including unit, component, integration, end-to-end, and performance tests. Java Streaming - Core understanding of Java streaming and AWS integration. Infrastructure as Code - Experience with CloudFormation or similar tools for infrastructure management. Large-Scale Systems Design - Experience with designing large-scale systems. Distributed Systems Troubleshooting - Ability to troubleshoot distributed systems. Bonus Points For An appetite to contribute to the wider Capco business outside of project assignments. This can be achieved through various means including thought leadership activities, supporting RFP's and the coaching/mentoring of more junior engineering team members Proficiency with Gitlab for CI/CD processes. Behaviour Driven Design - Experience writing automation test cases in Cucumber using Behaviour Driven Design (BDD). AWS Certified Solutions Architect - Associate or Professional level certification required. Security Best Practices - Strong knowledge of security best practices, including the use of IAM Roles, KMS, etc. Why Join Capco You'll be part of a team where your voice matters. We're collaborative, non-hierarchical, and Laser-focused on creating impact - for our clients and for you. At Capco, you'll shape your career around your strengths, enjoy flexibility and trust, and work with people who genuinely care about your growth and wellbeing. We offer a competitive, people-first benefits package designed to support every aspect of your life: Core Benefits: Discretionary bonus, competitive pension, health insurance, life insurance and critical illness cover. Mental Health: Easy access to CareFirst, Unmind, Aviva consultations, and in-house first aiders. Family-Friendly: Maternity, adoption, shared parental leave, plus paid leave for sickness, pregnancy loss, fertility treatment, menopause, and bereavement. Family Care: 8 complimentary backup care sessions for emergency childcare or elder care. Holiday Flexibility: 5 weeks of annual leave with the option to buy or sell holiday days based on your needs. Continuous Learning: Minimum 40 Hours of Training Annually: Take your pick-workshops, certifications, E-learning-your growth, your way. Also, Business Coach assigned from Day One: Get one-on-one guidance to fast-track your goals and accelerate your development. Healthcare Access: Convenient online GP services. Extra Perks: Gympass (Wellhub), travel insurance, Tastecard, season ticket loans, Cycle to Work, and dental insurance. Inclusion at Capco We're committed to a barrier-free, inclusive recruitment process. If you need any adjustments at any stage, just let us know - we'll be happy to help. We welcome applicants from all backgrounds. At Capco, we value the difference you make, and the differences that make you. Our culture champions diversity, equity and inclusivity, and we bring a collaborative mindset to our partnerships with clients and colleagues. is the cornerstone of our success and a value that our employees live and breathe every day.
Jan 31, 2026
Full time
Principal Backend Engineer - Java Location: London (Hybrid) | Type: Permanent The Role Capco is growing our Engineering team - and we're looking for experienced Principal Backend Engineers with strong Java skills and a passion for delivering innovative solutions in financial services. If you enjoy solving complex problems, working with cloud-native technologies, and collaborating in agile teams, we'd love to hear from you. As a Principal Backend Engineer at Capco, you'll contribute to high-impact, client-facing projects that shape the future of financial services. You'll work alongside talented engineers, have access to industry-leading training, and get the opportunity to grow your skills across multiple platforms. You will also get the chance to work across different domains within FS & Energy. What You'll Do Build and deliver scalable Back End services using Java (11, 17+) Design and implement APIs and microservices for enterprise systems Work across cloud platforms, particularly AWS, using best practice deployment techniques Contribute to architecture discussions and solution design Develop robust test coverage including unit, integration, and performance testing Collaborate in agile teams alongside clients, product managers, and other engineers What We're Looking For Java Development - Expertise in Java 11, 17 and above. Spring Boot - Proficiency with the Spring Boot framework. Cloud Services - Deep understanding of deploying enterprise level software into any public cloud, preferably AWS. Architecture Patterns - Experience implementing microservices, event-driven, CQRS and cloud-native architectures. CI/CD - Strong understanding of CI/CD pipelines, particularly within the AWS ecosystem. Database Management - Proficiency in both SQL and NoSQL databases. Message Brokers - Experience with Kafka. Testing - Ability to write various types of tests including unit, component, integration, end-to-end, and performance tests. Java Streaming - Core understanding of Java streaming and AWS integration. Infrastructure as Code - Experience with CloudFormation or similar tools for infrastructure management. Large-Scale Systems Design - Experience with designing large-scale systems. Distributed Systems Troubleshooting - Ability to troubleshoot distributed systems. Bonus Points For An appetite to contribute to the wider Capco business outside of project assignments. This can be achieved through various means including thought leadership activities, supporting RFP's and the coaching/mentoring of more junior engineering team members Proficiency with Gitlab for CI/CD processes. Behaviour Driven Design - Experience writing automation test cases in Cucumber using Behaviour Driven Design (BDD). AWS Certified Solutions Architect - Associate or Professional level certification required. Security Best Practices - Strong knowledge of security best practices, including the use of IAM Roles, KMS, etc. Why Join Capco You'll be part of a team where your voice matters. We're collaborative, non-hierarchical, and Laser-focused on creating impact - for our clients and for you. At Capco, you'll shape your career around your strengths, enjoy flexibility and trust, and work with people who genuinely care about your growth and wellbeing. We offer a competitive, people-first benefits package designed to support every aspect of your life: Core Benefits: Discretionary bonus, competitive pension, health insurance, life insurance and critical illness cover. Mental Health: Easy access to CareFirst, Unmind, Aviva consultations, and in-house first aiders. Family-Friendly: Maternity, adoption, shared parental leave, plus paid leave for sickness, pregnancy loss, fertility treatment, menopause, and bereavement. Family Care: 8 complimentary backup care sessions for emergency childcare or elder care. Holiday Flexibility: 5 weeks of annual leave with the option to buy or sell holiday days based on your needs. Continuous Learning: Minimum 40 Hours of Training Annually: Take your pick-workshops, certifications, E-learning-your growth, your way. Also, Business Coach assigned from Day One: Get one-on-one guidance to fast-track your goals and accelerate your development. Healthcare Access: Convenient online GP services. Extra Perks: Gympass (Wellhub), travel insurance, Tastecard, season ticket loans, Cycle to Work, and dental insurance. Inclusion at Capco We're committed to a barrier-free, inclusive recruitment process. If you need any adjustments at any stage, just let us know - we'll be happy to help. We welcome applicants from all backgrounds. At Capco, we value the difference you make, and the differences that make you. Our culture champions diversity, equity and inclusivity, and we bring a collaborative mindset to our partnerships with clients and colleagues. is the cornerstone of our success and a value that our employees live and breathe every day.
Principal Electronics Engineer Southampton or Bristol 6-month contract Paying up to £65p/h (InsideIR35) Please note - due to the nature of the work, you will need to hold or be eligible to obtain a high level of UK Security clearance - please only apply if suitable Overview Primary focus on the design and development of digital processing electronics and support to RF and analogue power circuitry for complex laboratory and aircraft sensor systems. You will work across a range of projects throughout various stages of the product lifecycle, from initial concept development through to early life production and field support. Key Responsibilities: Design and development of mixed-technology electronic designs comprising of one or more Microcontrollers, CPLD and/or FPGA devices interfacing with RF and analogue circuits. Implementation of digital interfaces such as Ethernet, CAN, I2C, SPI and RS422 alongside high-speed optical fibre and Ethernet interfaces. Design and development of power and control boards requiring high safety ratings and designed for DO-160 qualification. The role will focus on being the technical focal point for supporting our active and future airborne communication designs, including occasional customer and wider supply chain liaison. Required Skillset & Experience Analogue circuit design experience with knowledge/hands-on experience of op-amps, ADC?s and DAC driven reference supplies. RF circuit design experience with knowledge/hands-on experience of RF amplifiers, multiplexors and signal conditioning. Experience in providing support to embedded software and firmware teams. Experience in peer reviewing designs and support to system architects/system integration activities. Working knowledge of requirements management and design within DO-254. Experience in digital circuit design using FPGA's, Microcontrollers and DDR/Flash memories. Experience in circuit design modelling and simulation tools. Experience in generating concise technical reports detailing design solutions, implementation rationale and test reports. Experience of following a design lifecycle process, such as participating in design reviews, which come with working in a high-technology defence environment. Practical hands-on experience of high-speed digital hardware circuit design, including schematic entry, component selection and generation of supporting design documentation. Experience of PCB prototyping, commissioning and fault-finding using electronic test and measurement equipment within an engineering laboratory environment. A Degree in a relevant engineering or scientific discipline (Electronics Engineering preferred). Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Jan 31, 2026
Contractor
Principal Electronics Engineer Southampton or Bristol 6-month contract Paying up to £65p/h (InsideIR35) Please note - due to the nature of the work, you will need to hold or be eligible to obtain a high level of UK Security clearance - please only apply if suitable Overview Primary focus on the design and development of digital processing electronics and support to RF and analogue power circuitry for complex laboratory and aircraft sensor systems. You will work across a range of projects throughout various stages of the product lifecycle, from initial concept development through to early life production and field support. Key Responsibilities: Design and development of mixed-technology electronic designs comprising of one or more Microcontrollers, CPLD and/or FPGA devices interfacing with RF and analogue circuits. Implementation of digital interfaces such as Ethernet, CAN, I2C, SPI and RS422 alongside high-speed optical fibre and Ethernet interfaces. Design and development of power and control boards requiring high safety ratings and designed for DO-160 qualification. The role will focus on being the technical focal point for supporting our active and future airborne communication designs, including occasional customer and wider supply chain liaison. Required Skillset & Experience Analogue circuit design experience with knowledge/hands-on experience of op-amps, ADC?s and DAC driven reference supplies. RF circuit design experience with knowledge/hands-on experience of RF amplifiers, multiplexors and signal conditioning. Experience in providing support to embedded software and firmware teams. Experience in peer reviewing designs and support to system architects/system integration activities. Working knowledge of requirements management and design within DO-254. Experience in digital circuit design using FPGA's, Microcontrollers and DDR/Flash memories. Experience in circuit design modelling and simulation tools. Experience in generating concise technical reports detailing design solutions, implementation rationale and test reports. Experience of following a design lifecycle process, such as participating in design reviews, which come with working in a high-technology defence environment. Practical hands-on experience of high-speed digital hardware circuit design, including schematic entry, component selection and generation of supporting design documentation. Experience of PCB prototyping, commissioning and fault-finding using electronic test and measurement equipment within an engineering laboratory environment. A Degree in a relevant engineering or scientific discipline (Electronics Engineering preferred). Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Job Title: Principal Mechanical Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55k What you'll be doing: Design of multiple platform systems, sub-systems and equipment for the next generation Royal Navy submarines Undertake functional design activities, modelling and analysis Produce design documentation, Verification & Validation evidence and safety justifications Support specification qualification and procurement of components, working collaboratively with suppliers Engaging with stakeholders across the cross-functional project team Driving engineering governance through peer reviews and design reviews Your skills and experiences: Essential: Proven capability in system lifecycle delivery - from concept through to commissioning Demonstrated leadership - either through technical direction, mentoring, or project ownership Degree Level Qualification or Chartered engineer or working towards professional accreditation. Mechanical Engineering background in Rotator Machinery, Components or Fluid Dynamics. Desirable: Knowledge of platform-level constraints such as noise, shock, or survivability Previous experience integrating purification systems with submarine life-support, HVAC, and emergency protocols Experience in the design of gas scrubbing, filtration, and environmental control systems (e.g. CO removal, O generation, trace contaminant management , radiological hazards) - ideally in complex , safety-critical environments (e.g. maritime, aerospace, defence, nuclear, oil & gas and sub-sea) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering team: As a Lead Mechanical Engineer - Air Purification Systems, you will play a pivotal role in the design and development of submarine Air Purification and Atmosphere Monitoring systems. This includes system-level design, technical leadership , supplier engagement, and the opportunity to steer design architecture across a major submarine programme. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Principal Mechanical Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55k What you'll be doing: Design of multiple platform systems, sub-systems and equipment for the next generation Royal Navy submarines Undertake functional design activities, modelling and analysis Produce design documentation, Verification & Validation evidence and safety justifications Support specification qualification and procurement of components, working collaboratively with suppliers Engaging with stakeholders across the cross-functional project team Driving engineering governance through peer reviews and design reviews Your skills and experiences: Essential: Proven capability in system lifecycle delivery - from concept through to commissioning Demonstrated leadership - either through technical direction, mentoring, or project ownership Degree Level Qualification or Chartered engineer or working towards professional accreditation. Mechanical Engineering background in Rotator Machinery, Components or Fluid Dynamics. Desirable: Knowledge of platform-level constraints such as noise, shock, or survivability Previous experience integrating purification systems with submarine life-support, HVAC, and emergency protocols Experience in the design of gas scrubbing, filtration, and environmental control systems (e.g. CO removal, O generation, trace contaminant management , radiological hazards) - ideally in complex , safety-critical environments (e.g. maritime, aerospace, defence, nuclear, oil & gas and sub-sea) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering team: As a Lead Mechanical Engineer - Air Purification Systems, you will play a pivotal role in the design and development of submarine Air Purification and Atmosphere Monitoring systems. This includes system-level design, technical leadership , supplier engagement, and the opportunity to steer design architecture across a major submarine programme. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Engineer - Human Factors Location: UK Wide (Hybrid) Salary: Negotiable (Commensurate with skills and experience) What you'll be doing: Assessing risks of human error and providing Human Factors advice Performing task analysis Working with Process authors to improve procedures to reduce risk of unintended outcomes Representing Human Factors at design technical reviews Conducting design substantiation reviews Supporting Safety Case delivery Leading Human Factors programmes of work Your skills and experiences: Essential Degree in Human Factors/Psychology or equivalent experience Demonstrable Human Factors experience Experience in delivering Human Factors into safety case in a nuclear setting Previous experience of stakeholder management Proven experience in coaching and mentor others Experience in writing assessment reports and safety cases Desirable: Chartered Ergonomist status with CIEHF (or capable of achieving this) Submarine experience Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Human factors Team: An excellent opportunity has arisen for a Principal Engineer - Human Factors, working within The Human Factors Team. You will be looking at the Human Factors of Site Safety of the Barrow site and Boat programmes. As a Principal Human Factors engineer, you will be part of a team working across all 3 submarine programmes at BAE Systems. This is a very exciting time to be joining one the largest Human Factors teams in the UK. Our team provides safety-oriented support to the day-to-day business of designing, building and operating submarines and to the maintenance of our nuclear site licence. Should you wish to relocate closer to the nuclear site at Barrow, we offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Principal Engineer - Human Factors Location: UK Wide (Hybrid) Salary: Negotiable (Commensurate with skills and experience) What you'll be doing: Assessing risks of human error and providing Human Factors advice Performing task analysis Working with Process authors to improve procedures to reduce risk of unintended outcomes Representing Human Factors at design technical reviews Conducting design substantiation reviews Supporting Safety Case delivery Leading Human Factors programmes of work Your skills and experiences: Essential Degree in Human Factors/Psychology or equivalent experience Demonstrable Human Factors experience Experience in delivering Human Factors into safety case in a nuclear setting Previous experience of stakeholder management Proven experience in coaching and mentor others Experience in writing assessment reports and safety cases Desirable: Chartered Ergonomist status with CIEHF (or capable of achieving this) Submarine experience Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Human factors Team: An excellent opportunity has arisen for a Principal Engineer - Human Factors, working within The Human Factors Team. You will be looking at the Human Factors of Site Safety of the Barrow site and Boat programmes. As a Principal Human Factors engineer, you will be part of a team working across all 3 submarine programmes at BAE Systems. This is a very exciting time to be joining one the largest Human Factors teams in the UK. Our team provides safety-oriented support to the day-to-day business of designing, building and operating submarines and to the maintenance of our nuclear site licence. Should you wish to relocate closer to the nuclear site at Barrow, we offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Engineer - Product Safety Location: Barrow-in-Furness, Filton or Broad Oak - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Develop, implement and maintain the Project Safety Management System within a Systems Engineering framework Produce and manage Project Safety Management Plans & Justification Plans Lead Whole Boat Product Safety hazard and risk identification, management and assessment activities, including modern analysis techniques such as STAMP & STPA Influence the construction and delivery of the Project Safety Case including Safety Case reports throughout the projects lifecycle Complete peer reviews, checking, verification and assurance tasks to demonstrate the adequacy and robustness of the Safety Case and supporting documentation Oversee and peer review junior rules in the Product Safety team Understand the application of wider Safety Case, Quality and HS&E Management System documentation Your skills and experiences: Essential: Science Technology Engineering Mathematics (STEM) Degree or equivalent qualification Awareness of the challenges posed by the environment that the product will be exposed to Experience in delivery of traditional safety analysis techniques such FMEA, HAZOP, FTA etc . Experience in compilation and delivery Safety Case Reports and other supporting safety documentation e.g. plans, process, requirements etc . Experience of development and working within a Projects Safety Management System Ability to interpret technical data and produce clear, logical and robust safety arguments Desirable: Professional Chartership or working towards Demonstrable knowledge of design, manufacturing, assembly, commissioning and testing submarines lifecycle phases. Experience of modern safety analysis techniques such as STAMP, STPA, FRAM etc . Experience and knowledge of System Engineering International Standards and application in safety engineering context Previous experience of leading appropriate meetings and Working Groups Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Safety & Environmental team As the Principal Product Safety & Environmental Engineer, you will also be responsible for the development and maintenance of the Project Product Safety Management System and Product Safety Cases for the SSNA project and be able to resolve & guide others in solving complex project-related issues/ conflicts across disciplines from a Product Safety perspective. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 5th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Principal Engineer - Product Safety Location: Barrow-in-Furness, Filton or Broad Oak - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Develop, implement and maintain the Project Safety Management System within a Systems Engineering framework Produce and manage Project Safety Management Plans & Justification Plans Lead Whole Boat Product Safety hazard and risk identification, management and assessment activities, including modern analysis techniques such as STAMP & STPA Influence the construction and delivery of the Project Safety Case including Safety Case reports throughout the projects lifecycle Complete peer reviews, checking, verification and assurance tasks to demonstrate the adequacy and robustness of the Safety Case and supporting documentation Oversee and peer review junior rules in the Product Safety team Understand the application of wider Safety Case, Quality and HS&E Management System documentation Your skills and experiences: Essential: Science Technology Engineering Mathematics (STEM) Degree or equivalent qualification Awareness of the challenges posed by the environment that the product will be exposed to Experience in delivery of traditional safety analysis techniques such FMEA, HAZOP, FTA etc . Experience in compilation and delivery Safety Case Reports and other supporting safety documentation e.g. plans, process, requirements etc . Experience of development and working within a Projects Safety Management System Ability to interpret technical data and produce clear, logical and robust safety arguments Desirable: Professional Chartership or working towards Demonstrable knowledge of design, manufacturing, assembly, commissioning and testing submarines lifecycle phases. Experience of modern safety analysis techniques such as STAMP, STPA, FRAM etc . Experience and knowledge of System Engineering International Standards and application in safety engineering context Previous experience of leading appropriate meetings and Working Groups Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Safety & Environmental team As the Principal Product Safety & Environmental Engineer, you will also be responsible for the development and maintenance of the Project Product Safety Management System and Product Safety Cases for the SSNA project and be able to resolve & guide others in solving complex project-related issues/ conflicts across disciplines from a Product Safety perspective. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 5th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title : Principal Product Safety Engineer Salary: Up to £68,500 dependent on skills and experience Location: Scotstoun or Filton, - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Provide support to the Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within. Responsible for product safety assessment against major subsystems or key complex technologies Verify the quality of submissions to the Hazard Log Organise and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required. Take the lead on all product safety activities associated with the equipment area allocated to them, potentially delegating, managing and reviewing the work of more junior engineers carrying out aspects of the scope. Your skills and experiences: Essential: Knowledge of product safety management processes and techniques Experience of working in more than one phase of the Life Cycle Management (LCM) framework, with sufficient experience of the total LCM to enable a good understanding of adjacent phases and through life engineering issues. Awareness of customer (Ship/ System Safety) standards such as:- DSA-02 JSP430; Def. Stan 00-56; Mil Std 882E BS EN 61508 Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. Product Safety Team: The River Class Destroyer project is part of an 'unprecedented fleet renewal' by the Royal Canadian Navy (RCN). As part of this project, you will be joining a small team of 11 Product Safety practitioners located across two sites. You may be working with others on a large complex programme or individually for one or many smaller programmes. Accountability for the safety of the design solution rests with the Technical Authority. Your role is to support the Technical Authority in their decision making, create a plan of activities that will ensure that by working within the Product safety management framework, risks have been identified systematically and managed so far as is reasonable practicable. You will become exposed to a wide range of technical disciplines, be able to follow technical argument and be able to influence the integrity of the final product. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 4th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title : Principal Product Safety Engineer Salary: Up to £68,500 dependent on skills and experience Location: Scotstoun or Filton, - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Provide support to the Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within. Responsible for product safety assessment against major subsystems or key complex technologies Verify the quality of submissions to the Hazard Log Organise and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required. Take the lead on all product safety activities associated with the equipment area allocated to them, potentially delegating, managing and reviewing the work of more junior engineers carrying out aspects of the scope. Your skills and experiences: Essential: Knowledge of product safety management processes and techniques Experience of working in more than one phase of the Life Cycle Management (LCM) framework, with sufficient experience of the total LCM to enable a good understanding of adjacent phases and through life engineering issues. Awareness of customer (Ship/ System Safety) standards such as:- DSA-02 JSP430; Def. Stan 00-56; Mil Std 882E BS EN 61508 Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. Product Safety Team: The River Class Destroyer project is part of an 'unprecedented fleet renewal' by the Royal Canadian Navy (RCN). As part of this project, you will be joining a small team of 11 Product Safety practitioners located across two sites. You may be working with others on a large complex programme or individually for one or many smaller programmes. Accountability for the safety of the design solution rests with the Technical Authority. Your role is to support the Technical Authority in their decision making, create a plan of activities that will ensure that by working within the Product safety management framework, risks have been identified systematically and managed so far as is reasonable practicable. You will become exposed to a wide range of technical disciplines, be able to follow technical argument and be able to influence the integrity of the final product. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 4th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Electrical Instrumentation Engineer Location: Barrow-in-Furness. On-site Salary: Negotiable, depending on experience What you'll be doing: Liaising with internal customers as required to foster collaborative working relationships and ensure requirements are adequately articulated, understood and met Installation of a variety of different instrumentation around site that captures our customer's needs Fault finding and repairing of legacy equipment Work with BAE Systems' supply chain department and equipment suppliers to deliver equipment that meets customer requirements Where appropriate support factory acceptance trial attendance and submarine system trials and analyse trial results when required Undertake peer reviews or checking/verification tasks as directed Provide support to the Certificate of Design activities Support the production of evidence in support of qualification, legislative requirements and safety justifications and provide specialist support for associated activities Your skills and experiences: Essential: Strong knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures. Excellent problem solving and analytical skills Desirable: EngTech (or be able to satisfy requirements for EngTech) Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Instrumentation Development Services (IDS) team As an Electrical Instrumentation Engineer, you will provide support to the senior and principal engineers and/or external specialists during development of testing regimes and verification activities for platform electronic systems. You will be involved in analysis and production of technical reports supporting system verification. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 8th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Electrical Instrumentation Engineer Location: Barrow-in-Furness. On-site Salary: Negotiable, depending on experience What you'll be doing: Liaising with internal customers as required to foster collaborative working relationships and ensure requirements are adequately articulated, understood and met Installation of a variety of different instrumentation around site that captures our customer's needs Fault finding and repairing of legacy equipment Work with BAE Systems' supply chain department and equipment suppliers to deliver equipment that meets customer requirements Where appropriate support factory acceptance trial attendance and submarine system trials and analyse trial results when required Undertake peer reviews or checking/verification tasks as directed Provide support to the Certificate of Design activities Support the production of evidence in support of qualification, legislative requirements and safety justifications and provide specialist support for associated activities Your skills and experiences: Essential: Strong knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures. Excellent problem solving and analytical skills Desirable: EngTech (or be able to satisfy requirements for EngTech) Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Instrumentation Development Services (IDS) team As an Electrical Instrumentation Engineer, you will provide support to the senior and principal engineers and/or external specialists during development of testing regimes and verification activities for platform electronic systems. You will be involved in analysis and production of technical reports supporting system verification. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 8th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on qualifications and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies Production of high-quality submissions including hazard logs, safety cases and safety plans Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 30th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on qualifications and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies Production of high-quality submissions including hazard logs, safety cases and safety plans Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 30th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Engineer - Electrical Engineering (Power) Location: Barrow-In-Furness (Hybrid). - (Barrow - 2 days a fortnight onsite; 1 day a week onsite at Filton) depending on business needs Salary: Up to £57,500 (Commensurate with skills and experience) What you'll be doing: Develop design solutions to agreed time, cost and quality in accordance with project or business milestones Develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme Understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities Produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications Provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer Support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Provide support to the Certificate of Design activities appropriate to the discipline and articulate and present complex technical argument clearly, logically and simply Deliver technical input and engineering solutions in support of build activities, defect resolution and change management Your skills and experiences: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant knowledge of AC and DC electrical power systems Experience of working within a relevant Engineering role to industry codes and standards Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Electrical Engineering Power Team: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Principal Engineer - Electrical Engineering (Power) Location: Barrow-In-Furness (Hybrid). - (Barrow - 2 days a fortnight onsite; 1 day a week onsite at Filton) depending on business needs Salary: Up to £57,500 (Commensurate with skills and experience) What you'll be doing: Develop design solutions to agreed time, cost and quality in accordance with project or business milestones Develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme Understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities Produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications Provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer Support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Provide support to the Certificate of Design activities appropriate to the discipline and articulate and present complex technical argument clearly, logically and simply Deliver technical input and engineering solutions in support of build activities, defect resolution and change management Your skills and experiences: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant knowledge of AC and DC electrical power systems Experience of working within a relevant Engineering role to industry codes and standards Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Electrical Engineering Power Team: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Frimley, Weymouth, Bristol, Portsmouth, Barrow-in-Furness, Devonport, Plymouth or Brough, dependant on role and your personal circumstances. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable, depending on experience What you'll be doing: Providing advice on product safety matters to project and engineering managers delivering the programmes and ensuring the safety considerations (DEF STAN 0055/0056) are correctly considered and implemented Engaging with third parties, to review and gather supporting safety case evidence Developing safety arguments, both physical and functional, using appropriate safety analysis methods e.g. (FHA/STPA/FMEA/FTA) producing and updating safety case and safety management documentation using appropriate regulations and standards Line managing other safety practitioners Applying ALARP principles Your skills and experiences: Essential: Safety engineering processes, practices and tools Clear understanding of safety engineering & assurance principals Experience and qualified engineers from other disciplines who display the correct behaviours and have an understanding of safety engineering, will actively be considered for this role Desirable: Good communication skills and ability to interact and manage stakeholders Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Combat Systems Safety Team Working closely with several engineers and technical specialists on both In-Service and In-Build Combat Systems, you will have the opportunity to work on developing safety arguments. This will include developing an understanding of new technologies and sensor systems used to support the safety arguments. We welcome people with experience of the military, defence and maritime industries, who can use their knowledge and learning to help us ensure that we provide the best products into submarines. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Frimley, Weymouth, Bristol, Portsmouth, Barrow-in-Furness, Devonport, Plymouth or Brough, dependant on role and your personal circumstances. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable, depending on experience What you'll be doing: Providing advice on product safety matters to project and engineering managers delivering the programmes and ensuring the safety considerations (DEF STAN 0055/0056) are correctly considered and implemented Engaging with third parties, to review and gather supporting safety case evidence Developing safety arguments, both physical and functional, using appropriate safety analysis methods e.g. (FHA/STPA/FMEA/FTA) producing and updating safety case and safety management documentation using appropriate regulations and standards Line managing other safety practitioners Applying ALARP principles Your skills and experiences: Essential: Safety engineering processes, practices and tools Clear understanding of safety engineering & assurance principals Experience and qualified engineers from other disciplines who display the correct behaviours and have an understanding of safety engineering, will actively be considered for this role Desirable: Good communication skills and ability to interact and manage stakeholders Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Combat Systems Safety Team Working closely with several engineers and technical specialists on both In-Service and In-Build Combat Systems, you will have the opportunity to work on developing safety arguments. This will include developing an understanding of new technologies and sensor systems used to support the safety arguments. We welcome people with experience of the military, defence and maritime industries, who can use their knowledge and learning to help us ensure that we provide the best products into submarines. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title : Principal Product Safety Engineer Salary: Up to £68,500 dependent on skills and experience Location: Scotstoun or Filton, - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Provide support to the Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within. Responsible for product safety assessment against major subsystems or key complex technologies Verify the quality of submissions to the Hazard Log Organise and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required. Take the lead on all product safety activities associated with the equipment area allocated to them, potentially delegating, managing and reviewing the work of more junior engineers carrying out aspects of the scope. Your skills and experiences: Essential: Knowledge of product safety management processes and techniques Experience of working in more than one phase of the Life Cycle Management (LCM) framework, with sufficient experience of the total LCM to enable a good understanding of adjacent phases and through life engineering issues. Awareness of customer (Ship/ System Safety) standards such as:- DSA-02 JSP430; Def. Stan 00-56; Mil Std 882E BS EN 61508 Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. Product Safety Team: The River Class Destroyer project is part of an 'unprecedented fleet renewal' by the Royal Canadian Navy (RCN). As part of this project, you will be joining a small team of 11 Product Safety practitioners located across two sites. You may be working with others on a large complex programme or individually for one or many smaller programmes. Accountability for the safety of the design solution rests with the Technical Authority. Your role is to support the Technical Authority in their decision making, create a plan of activities that will ensure that by working within the Product safety management framework, risks have been identified systematically and managed so far as is reasonable practicable. You will become exposed to a wide range of technical disciplines, be able to follow technical argument and be able to influence the integrity of the final product. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 4th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title : Principal Product Safety Engineer Salary: Up to £68,500 dependent on skills and experience Location: Scotstoun or Filton, - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Provide support to the Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within. Responsible for product safety assessment against major subsystems or key complex technologies Verify the quality of submissions to the Hazard Log Organise and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required. Take the lead on all product safety activities associated with the equipment area allocated to them, potentially delegating, managing and reviewing the work of more junior engineers carrying out aspects of the scope. Your skills and experiences: Essential: Knowledge of product safety management processes and techniques Experience of working in more than one phase of the Life Cycle Management (LCM) framework, with sufficient experience of the total LCM to enable a good understanding of adjacent phases and through life engineering issues. Awareness of customer (Ship/ System Safety) standards such as:- DSA-02 JSP430; Def. Stan 00-56; Mil Std 882E BS EN 61508 Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. Product Safety Team: The River Class Destroyer project is part of an 'unprecedented fleet renewal' by the Royal Canadian Navy (RCN). As part of this project, you will be joining a small team of 11 Product Safety practitioners located across two sites. You may be working with others on a large complex programme or individually for one or many smaller programmes. Accountability for the safety of the design solution rests with the Technical Authority. Your role is to support the Technical Authority in their decision making, create a plan of activities that will ensure that by working within the Product safety management framework, risks have been identified systematically and managed so far as is reasonable practicable. You will become exposed to a wide range of technical disciplines, be able to follow technical argument and be able to influence the integrity of the final product. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 4th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-in-Furness. This position will require a full-time presence on-site Salary: Competitive What you'll be doing: Developing the package of design evidence required to justify a safe, effective design and generate customer confidence in the design solution Specifying and assisting in the build of prototypes, products and systems suitable for testing Providing timely corrective actions on all assigned defects and issues Ensuring that commitments are agreed, reviewed and met Mentoring junior engineers regarding technical matters Making presentations effectively to technical and management audiences and within this, be able to identify and keep abreast of novel technical concepts and markets Author/co-author technical reports, papers, articles, patents and presentations as required Your skills and experiences: Educated to degree level in Engineering, Mechanical or Science subjects Be able to design documentation with the ability to present these to customers and wider groups Have the ability to solve complex engineering calculations Be proficient in CAD, MS Office and be comfortable with other IT applications Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Platform Systems team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 6th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-in-Furness. This position will require a full-time presence on-site Salary: Competitive What you'll be doing: Developing the package of design evidence required to justify a safe, effective design and generate customer confidence in the design solution Specifying and assisting in the build of prototypes, products and systems suitable for testing Providing timely corrective actions on all assigned defects and issues Ensuring that commitments are agreed, reviewed and met Mentoring junior engineers regarding technical matters Making presentations effectively to technical and management audiences and within this, be able to identify and keep abreast of novel technical concepts and markets Author/co-author technical reports, papers, articles, patents and presentations as required Your skills and experiences: Educated to degree level in Engineering, Mechanical or Science subjects Be able to design documentation with the ability to present these to customers and wider groups Have the ability to solve complex engineering calculations Be proficient in CAD, MS Office and be comfortable with other IT applications Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Platform Systems team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 6th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Frimley, Weymouth, Bristol, Portsmouth, Barrow-in-Furness, Devonport, Plymouth or Brough, dependant on role and your personal circumstances. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable, depending on experience What you'll be doing: Providing advice on product safety matters to project and engineering managers delivering the programmes and ensuring the safety considerations (DEF STAN 0055/0056) are correctly considered and implemented Engaging with third parties, to review and gather supporting safety case evidence Developing safety arguments, both physical and functional, using appropriate safety analysis methods e.g. (FHA/STPA/FMEA/FTA) producing and updating safety case and safety management documentation using appropriate regulations and standards Line managing other safety practitioners Applying ALARP principles Your skills and experiences: Essential: Safety engineering processes, practices and tools Clear understanding of safety engineering & assurance principals Experience and qualified engineers from other disciplines who display the correct behaviours and have an understanding of safety engineering, will actively be considered for this role Desirable: Good communication skills and ability to interact and manage stakeholders Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Combat Systems Safety Team Working closely with several engineers and technical specialists on both In-Service and In-Build Combat Systems, you will have the opportunity to work on developing safety arguments. This will include developing an understanding of new technologies and sensor systems used to support the safety arguments. We welcome people with experience of the military, defence and maritime industries, who can use their knowledge and learning to help us ensure that we provide the best products into submarines. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Frimley, Weymouth, Bristol, Portsmouth, Barrow-in-Furness, Devonport, Plymouth or Brough, dependant on role and your personal circumstances. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable, depending on experience What you'll be doing: Providing advice on product safety matters to project and engineering managers delivering the programmes and ensuring the safety considerations (DEF STAN 0055/0056) are correctly considered and implemented Engaging with third parties, to review and gather supporting safety case evidence Developing safety arguments, both physical and functional, using appropriate safety analysis methods e.g. (FHA/STPA/FMEA/FTA) producing and updating safety case and safety management documentation using appropriate regulations and standards Line managing other safety practitioners Applying ALARP principles Your skills and experiences: Essential: Safety engineering processes, practices and tools Clear understanding of safety engineering & assurance principals Experience and qualified engineers from other disciplines who display the correct behaviours and have an understanding of safety engineering, will actively be considered for this role Desirable: Good communication skills and ability to interact and manage stakeholders Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Combat Systems Safety Team Working closely with several engineers and technical specialists on both In-Service and In-Build Combat Systems, you will have the opportunity to work on developing safety arguments. This will include developing an understanding of new technologies and sensor systems used to support the safety arguments. We welcome people with experience of the military, defence and maritime industries, who can use their knowledge and learning to help us ensure that we provide the best products into submarines. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Engineer - Electrical Engineering (Power) Location: Barrow-In-Furness (Hybrid). - (Barrow - 2 days a fortnight onsite; 1 day a week onsite at Filton) depending on business needs Salary: Up to £57,500 (Commensurate with skills and experience) What you'll be doing: Develop design solutions to agreed time, cost and quality in accordance with project or business milestones Develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme Understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities Produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications Provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer Support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Provide support to the Certificate of Design activities appropriate to the discipline and articulate and present complex technical argument clearly, logically and simply Deliver technical input and engineering solutions in support of build activities, defect resolution and change management Your skills and experiences: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant knowledge of AC and DC electrical power systems Experience of working within a relevant Engineering role to industry codes and standards Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Electrical Engineering Power Team: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Principal Engineer - Electrical Engineering (Power) Location: Barrow-In-Furness (Hybrid). - (Barrow - 2 days a fortnight onsite; 1 day a week onsite at Filton) depending on business needs Salary: Up to £57,500 (Commensurate with skills and experience) What you'll be doing: Develop design solutions to agreed time, cost and quality in accordance with project or business milestones Develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme Understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities Produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications Provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer Support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Provide support to the Certificate of Design activities appropriate to the discipline and articulate and present complex technical argument clearly, logically and simply Deliver technical input and engineering solutions in support of build activities, defect resolution and change management Your skills and experiences: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant knowledge of AC and DC electrical power systems Experience of working within a relevant Engineering role to industry codes and standards Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Electrical Engineering Power Team: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on qualifications and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies Production of high-quality submissions including hazard logs, safety cases and safety plans Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 30th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 31, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on qualifications and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies Production of high-quality submissions including hazard logs, safety cases and safety plans Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 30th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
