Job role: Multi-Skilled Maintenance Technician Location: Kyle of Lochalsh & Applecross, Scotland Salary: 26,775 - 29,750 per annum (dependent on experience) Contract Type: Full Time, Permanent Role Overview: Trevett Services are delighted to be partnering with a leading engineering and defence organisation to recruit a Multi-Skilled Maintenance Technician to support the maintenance and upkeep of a specialist operational facility in the Highlands of Scotland. This is an excellent opportunity for a hands-on maintenance professional with building fabric and general maintenance experience to join a highly skilled estates team. You'll be responsible for delivering planned and reactive maintenance across a unique and technically advanced environment, ensuring facilities remain safe, compliant and operational. This role is based across sites in Kyle of Lochalsh and Applecross , with travel to other operational locations as required. Key Responsibilities: Carry out planned preventative and reactive maintenance across commercial buildings and site facilities. Complete a wide range of building fabric maintenance including: Ceiling tile replacement, Blind repairs and replacements, Lock changes, Minor door repairs, Drain unblocking, Descaling works, Legionella (L8) flushing, Decorating, PAT Testing. Support the delivery of high-quality maintenance services in line with company standards. Ensure all work is completed safely and in accordance with Health & Safety procedures. Identify maintenance improvements and report asset defects where necessary. Deliver excellent customer service while communicating effectively with site personnel. Assist with continuous improvement initiatives across the maintenance team. Participate in the on-call rota when required. Maintain accurate maintenance records using company systems. Essential Experience: NVQ Level 3 in a relevant trade or vocational discipline or equivalent hands-on experience within a similar maintenance role. Previous experience within a multi-skilled maintenance, Fabric engineer or building maintenance role. Experience carrying out planned, preventative and reactive maintenance. Strong building fabric maintenance skills within commercial or industrial environments. Knowledge of health, safety and environmental procedures. Experience maintaining building services and site assets to a high standard. Good IT skills, including Microsoft Office. Ability to work independently and as part of a wider maintenance team. Full UK Driving Licence. Desirable Experience: Legionella L8 Flushing PAT Testing Benefits: Matched pension contribution with life assurance. Generous annual leave plus the option to purchase additional holidays. Health Cash Plan, Private Medical and Dental Insurance options. Employee discount platform covering retail, travel, restaurants, cinema tickets and more. Paid volunteering opportunities supporting local communities and charities. Ongoing training and professional development. Opportunity to work within a unique, highly secure and technically advanced engineering environment. Excellent long-term career progression within a nationally recognised organisation. Apply today or contact Tommy at Trevett Services for a confidential discussion about the role.
Aug 03, 2026
Full time
Job role: Multi-Skilled Maintenance Technician Location: Kyle of Lochalsh & Applecross, Scotland Salary: 26,775 - 29,750 per annum (dependent on experience) Contract Type: Full Time, Permanent Role Overview: Trevett Services are delighted to be partnering with a leading engineering and defence organisation to recruit a Multi-Skilled Maintenance Technician to support the maintenance and upkeep of a specialist operational facility in the Highlands of Scotland. This is an excellent opportunity for a hands-on maintenance professional with building fabric and general maintenance experience to join a highly skilled estates team. You'll be responsible for delivering planned and reactive maintenance across a unique and technically advanced environment, ensuring facilities remain safe, compliant and operational. This role is based across sites in Kyle of Lochalsh and Applecross , with travel to other operational locations as required. Key Responsibilities: Carry out planned preventative and reactive maintenance across commercial buildings and site facilities. Complete a wide range of building fabric maintenance including: Ceiling tile replacement, Blind repairs and replacements, Lock changes, Minor door repairs, Drain unblocking, Descaling works, Legionella (L8) flushing, Decorating, PAT Testing. Support the delivery of high-quality maintenance services in line with company standards. Ensure all work is completed safely and in accordance with Health & Safety procedures. Identify maintenance improvements and report asset defects where necessary. Deliver excellent customer service while communicating effectively with site personnel. Assist with continuous improvement initiatives across the maintenance team. Participate in the on-call rota when required. Maintain accurate maintenance records using company systems. Essential Experience: NVQ Level 3 in a relevant trade or vocational discipline or equivalent hands-on experience within a similar maintenance role. Previous experience within a multi-skilled maintenance, Fabric engineer or building maintenance role. Experience carrying out planned, preventative and reactive maintenance. Strong building fabric maintenance skills within commercial or industrial environments. Knowledge of health, safety and environmental procedures. Experience maintaining building services and site assets to a high standard. Good IT skills, including Microsoft Office. Ability to work independently and as part of a wider maintenance team. Full UK Driving Licence. Desirable Experience: Legionella L8 Flushing PAT Testing Benefits: Matched pension contribution with life assurance. Generous annual leave plus the option to purchase additional holidays. Health Cash Plan, Private Medical and Dental Insurance options. Employee discount platform covering retail, travel, restaurants, cinema tickets and more. Paid volunteering opportunities supporting local communities and charities. Ongoing training and professional development. Opportunity to work within a unique, highly secure and technically advanced engineering environment. Excellent long-term career progression within a nationally recognised organisation. Apply today or contact Tommy at Trevett Services for a confidential discussion about the role.
General Builder - (University Campus) £30,000 - £40,000 + £4,500 Call-Out bonus + 42 days Holiday + Overtime + £600 Skill Uplifts + Full access to Trade Qualifications + 36-Hour Week + Monday-Friday (days) Reading Are you a General Builder or similar looking for a Stable, University Campus role where you will receive 42 days holiday, £4500 On-call bonus and free access to gain trade qualifications to upskill yourself? This Maintenance Technician role suits a General Builder or Multi-Trade Operative with a background in brickwork, drainage, roofing, external works or similar looking for a permanent, in-house position with steady hours and consistent workload. This Maintenance Technician position is based on a large university estate, carrying out a wide range of building repairs across live campus buildings, roads, pathways, drainage systems and building fabric. The Role Road, pathway and paving repairs Brickwork, blockwork and small concrete repairs Drainage repairs, unblocking and minor excavation work Roofing, guttering, lead flashing and chimney repairs Door repairs, ironmongery, shelving, signage and general carpentry Basic plumbing repairs to sanitary ware, toilets, sinks and pipework Installing wooden or concrete ramps and handrails General building fabric repairs across occupied campus buildings Planned Preventative Maintenance (PPM) and reactive maintenance Logging work, risk assessments and updates via CAFM system Hours, Overtime & Call-Out 36 hours per week, Monday-Friday Paid overtime available Call-out rota approx. 1 weekend in every 4-5 £2,700 annual call-out rota payment Standby: £38.20 weekday / £70.20 weekend or bank holiday Attendance: approx. £15 per hour (minimum 2 hours per call-out) Salary Enhancements £600 per year uplifts available for additional skills: Lead roofing / flashing Sarnafil roofing systems Plaster patching / making good The Person General Builder, Multi-Trade Operative or Building Fabric Technician Strong background in brickwork, drainage, roofing or external works NVQ Level 3 / City & Guilds or time-served equivalent Able to work independently and manage varied repair work Professional, reliable and customer-facing Full UK driving licence Why This Role / Package 36-hour working week (shorter than standard) 39 days holiday (including bank holidays) £2,700 annual call-out rota payment Permanent, in-house position Stable Monday-Friday working pattern Paid overtime and structured standby payments Skill-based salary increases available Long-term job security within a large estate This role is advertised by Roundhouse Recruitment Ltd, acting as an employment agency.
Aug 01, 2026
Full time
General Builder - (University Campus) £30,000 - £40,000 + £4,500 Call-Out bonus + 42 days Holiday + Overtime + £600 Skill Uplifts + Full access to Trade Qualifications + 36-Hour Week + Monday-Friday (days) Reading Are you a General Builder or similar looking for a Stable, University Campus role where you will receive 42 days holiday, £4500 On-call bonus and free access to gain trade qualifications to upskill yourself? This Maintenance Technician role suits a General Builder or Multi-Trade Operative with a background in brickwork, drainage, roofing, external works or similar looking for a permanent, in-house position with steady hours and consistent workload. This Maintenance Technician position is based on a large university estate, carrying out a wide range of building repairs across live campus buildings, roads, pathways, drainage systems and building fabric. The Role Road, pathway and paving repairs Brickwork, blockwork and small concrete repairs Drainage repairs, unblocking and minor excavation work Roofing, guttering, lead flashing and chimney repairs Door repairs, ironmongery, shelving, signage and general carpentry Basic plumbing repairs to sanitary ware, toilets, sinks and pipework Installing wooden or concrete ramps and handrails General building fabric repairs across occupied campus buildings Planned Preventative Maintenance (PPM) and reactive maintenance Logging work, risk assessments and updates via CAFM system Hours, Overtime & Call-Out 36 hours per week, Monday-Friday Paid overtime available Call-out rota approx. 1 weekend in every 4-5 £2,700 annual call-out rota payment Standby: £38.20 weekday / £70.20 weekend or bank holiday Attendance: approx. £15 per hour (minimum 2 hours per call-out) Salary Enhancements £600 per year uplifts available for additional skills: Lead roofing / flashing Sarnafil roofing systems Plaster patching / making good The Person General Builder, Multi-Trade Operative or Building Fabric Technician Strong background in brickwork, drainage, roofing or external works NVQ Level 3 / City & Guilds or time-served equivalent Able to work independently and manage varied repair work Professional, reliable and customer-facing Full UK driving licence Why This Role / Package 36-hour working week (shorter than standard) 39 days holiday (including bank holidays) £2,700 annual call-out rota payment Permanent, in-house position Stable Monday-Friday working pattern Paid overtime and structured standby payments Skill-based salary increases available Long-term job security within a large estate This role is advertised by Roundhouse Recruitment Ltd, acting as an employment agency.
Temporary Maintenance Technician/Handyman, £15ph + Hol pay Bristol, Tools provided, no driving required. This is a hands-on position within a student accommodation team, ideal for someone who thrives in a fast-paced, service-oriented environment. What you'll do: Reactive maintenance in occupied rooms Repairs to building fabric, including painting and general upkeep Plumbing fixes: toilets, sinks, showers Furniture and lock repairs Lightbulb replacements and descaling Communal area upkeep and refuse management Regular PPM (Planned Preventive Maintenance) checks Prompt issue reporting and proactive standards upkeep What you'll bring Experience in maintenance, skilled labourer, or handyman roles Skilled in general repairs and building fabric work Strong communication and teamwork Physically fit and adaptable Health & Safety aware Ready to start immediately This is an immediate start! Apply now! (ritzrecempbus)
Aug 01, 2026
Seasonal
Temporary Maintenance Technician/Handyman, £15ph + Hol pay Bristol, Tools provided, no driving required. This is a hands-on position within a student accommodation team, ideal for someone who thrives in a fast-paced, service-oriented environment. What you'll do: Reactive maintenance in occupied rooms Repairs to building fabric, including painting and general upkeep Plumbing fixes: toilets, sinks, showers Furniture and lock repairs Lightbulb replacements and descaling Communal area upkeep and refuse management Regular PPM (Planned Preventive Maintenance) checks Prompt issue reporting and proactive standards upkeep What you'll bring Experience in maintenance, skilled labourer, or handyman roles Skilled in general repairs and building fabric work Strong communication and teamwork Physically fit and adaptable Health & Safety aware Ready to start immediately This is an immediate start! Apply now! (ritzrecempbus)
HGV Workshop Engineer - Reading Early shift We are looking for qualified and time served Heavy Technicians who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. If you are looking for a company that develops their staff, ensures up to date product training and supports you getting various accreditations, then this company is worth your serious consideration. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. Your future employer have been providing first class solutions for many years. It s the standards that are set in the workshop that go a long to ensuring customer satisfaction at the other end. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC or EV qualification would be desirable, as would a HGV Class 1 or Class 2 licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.
Aug 01, 2026
Full time
HGV Workshop Engineer - Reading Early shift We are looking for qualified and time served Heavy Technicians who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. If you are looking for a company that develops their staff, ensures up to date product training and supports you getting various accreditations, then this company is worth your serious consideration. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. Your future employer have been providing first class solutions for many years. It s the standards that are set in the workshop that go a long to ensuring customer satisfaction at the other end. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC or EV qualification would be desirable, as would a HGV Class 1 or Class 2 licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.
Branta Recruitment Ltd
Newcastle Upon Tyne, Tyne And Wear
Branta are seeking an experienced, technically robust Hard Services Manager for a contract role in Newcastle for a business-critical, 6-month contract. The successful individual will take operational ownership of the compliance, management, and strategic delivery of all building-related engineering services. You will be responsible for ensuring that statutory, mandatory, and organisational requirements are met while guaranteeing safe, reliable, and efficient mechanical, electrical, and building fabric services across the entire portfolio. Key Duties & Responsibilities Operational & Technical Leadership Lead and manage all daily mechanical, electrical, and building fabric maintenance activities across a diverse multi-site estate. Oversee and optimize active planned preventive maintenance (PPM), reactive breakdown pipelines, and critical lifecycle asset replacement programmes. Ensure all critical building infrastructure (HVAC, electrical distribution, BMS systems, water hygiene, fire safety systems, and lifts) operates safely and in absolute alignment with UK legislation. Act as the estate's Authorised Person (e.g., AP Electrical, AP Mechanical, AP Pressure Systems, or Water) as required. Compliance, Safety & Risk Mitigation Drive 100% statutory and regulatory compliance across the estate, ensuring strict adherence to Health & Safety at Work legislation, Electricity at Work Regulations, LOLER, PUWER, COSHH, and Water Safety (ACoP L8). Maintain pristine, audit-ready compliance files, asset registries, data logs, and comprehensive audit trails. Review, challenge, and sign off on contractor RAMS and implement strict safe systems of work (SSOW) and hot works permits. Contractor & Team Management Supervise and mentor the internal engineering workforce (supervisors, technicians, and craft personnel), planning and prioritizing workloads to maximize floor efficiency. Manage, audit, and hold accountable specialist third-party engineering contractors against strict SLAs and KPIs. Support the wider team with procurement, localized tendering processes, and performance evaluations for specialist hard services vendors. Commercial & Financial Control Administer fixed budgets for hard services, overseeing spend on planned works, reactive callouts, and minor capital upgrades. Track contractor billing, forecast financial requirements for the remainder of the contract term, and drive cost efficiencies. Contribute technical expertise to long-term capital investment schemes, estate resilience planning, and corporate decarbonization/sustainability goals. The Ideal Candidate (Person Specification) Qualifications & Technical Bias: A strong, time-served mechanical, electrical, or building services engineering bias. Recognized Authorised Person (AP) training credentials (electrical, mechanical, pressure, or water safety). Formal health and safety qualifications (IOSH Managing Safely or NEBOSH General Certificate). Professional engineering registration (IEng/CEng) is highly desirable but not strictly mandatory. Experience Required: Significant, verifiable track record managing Hard FM services within a complex, multi-site corporate, educational, public, or healthcare estate. Exceptional leadership credentials with experience managing both directly employed mobile trade technicians and specialist tier-1 external subcontractors. Proficient in the deployment, tracking, and close-out of tasks within corporate CAFM systems. Deep, practical knowledge of UK statutory compliance parameters, building regulations, and asset lifecycle asset tracking. Exceptional stakeholder management skills, with the ability to communicate technical risks and maintenance disruptions clearly to senior leadership and estate users. Working Conditions & Additional Information Travel: Ability to travel efficiently between multi-site property locations across the North East region. Flexibility: Occasional evening or weekend oversight may be required to monitor major project works or system shutdowns. Participation in an out-of-hours on-call engineering escalation rota may be required. To Apply If you are an available, North East-based Hard FM leader looking for a an immediate start, apply online today or contact Astrid Camacho for more information.
Jul 31, 2026
Contractor
Branta are seeking an experienced, technically robust Hard Services Manager for a contract role in Newcastle for a business-critical, 6-month contract. The successful individual will take operational ownership of the compliance, management, and strategic delivery of all building-related engineering services. You will be responsible for ensuring that statutory, mandatory, and organisational requirements are met while guaranteeing safe, reliable, and efficient mechanical, electrical, and building fabric services across the entire portfolio. Key Duties & Responsibilities Operational & Technical Leadership Lead and manage all daily mechanical, electrical, and building fabric maintenance activities across a diverse multi-site estate. Oversee and optimize active planned preventive maintenance (PPM), reactive breakdown pipelines, and critical lifecycle asset replacement programmes. Ensure all critical building infrastructure (HVAC, electrical distribution, BMS systems, water hygiene, fire safety systems, and lifts) operates safely and in absolute alignment with UK legislation. Act as the estate's Authorised Person (e.g., AP Electrical, AP Mechanical, AP Pressure Systems, or Water) as required. Compliance, Safety & Risk Mitigation Drive 100% statutory and regulatory compliance across the estate, ensuring strict adherence to Health & Safety at Work legislation, Electricity at Work Regulations, LOLER, PUWER, COSHH, and Water Safety (ACoP L8). Maintain pristine, audit-ready compliance files, asset registries, data logs, and comprehensive audit trails. Review, challenge, and sign off on contractor RAMS and implement strict safe systems of work (SSOW) and hot works permits. Contractor & Team Management Supervise and mentor the internal engineering workforce (supervisors, technicians, and craft personnel), planning and prioritizing workloads to maximize floor efficiency. Manage, audit, and hold accountable specialist third-party engineering contractors against strict SLAs and KPIs. Support the wider team with procurement, localized tendering processes, and performance evaluations for specialist hard services vendors. Commercial & Financial Control Administer fixed budgets for hard services, overseeing spend on planned works, reactive callouts, and minor capital upgrades. Track contractor billing, forecast financial requirements for the remainder of the contract term, and drive cost efficiencies. Contribute technical expertise to long-term capital investment schemes, estate resilience planning, and corporate decarbonization/sustainability goals. The Ideal Candidate (Person Specification) Qualifications & Technical Bias: A strong, time-served mechanical, electrical, or building services engineering bias. Recognized Authorised Person (AP) training credentials (electrical, mechanical, pressure, or water safety). Formal health and safety qualifications (IOSH Managing Safely or NEBOSH General Certificate). Professional engineering registration (IEng/CEng) is highly desirable but not strictly mandatory. Experience Required: Significant, verifiable track record managing Hard FM services within a complex, multi-site corporate, educational, public, or healthcare estate. Exceptional leadership credentials with experience managing both directly employed mobile trade technicians and specialist tier-1 external subcontractors. Proficient in the deployment, tracking, and close-out of tasks within corporate CAFM systems. Deep, practical knowledge of UK statutory compliance parameters, building regulations, and asset lifecycle asset tracking. Exceptional stakeholder management skills, with the ability to communicate technical risks and maintenance disruptions clearly to senior leadership and estate users. Working Conditions & Additional Information Travel: Ability to travel efficiently between multi-site property locations across the North East region. Flexibility: Occasional evening or weekend oversight may be required to monitor major project works or system shutdowns. Participation in an out-of-hours on-call engineering escalation rota may be required. To Apply If you are an available, North East-based Hard FM leader looking for a an immediate start, apply online today or contact Astrid Camacho for more information.
Workshop Vehicle Engineer (HGV Technician) Day Shifts Salary up to £54,000 + Overtime Our client is a well-established business with a long-standing reputation for delivering first-class fleet solutions. Their commitment to high workshop standards plays a key role in ensuring exceptional service and customer satisfaction. The Role You ll be responsible for inspecting, maintaining, and repairing a varied and diverse fleet. This is a hands-on role offering exposure to a wide range of vehicles, including: Heavy Goods Vehicles (HGVs) Refuse Collection Vehicles (RCVs) Road sweepers Hook loaders Light commercial vehicles (vans) Trailers and tippers Key Responsibilities Duties include, but are not limited to: Routine and preventative maintenance MOT preparation Servicing to DVSA standards 6- or 8-weekly safety inspections Diagnosing and rectifying faults Chassis and fabrication work Working with hydraulics and pneumatics Electrical diagnostics, wiring, and repairs Continuous improvement of vehicle standards About You We welcome applications from both qualified and time-served technicians, as well as those looking to further develop their skills. You will ideally have: A recognised qualification (City & Guilds, NVQ, or equivalent) A strong understanding of commercial vehicle mechanics A proactive attitude and commitment to high-quality workmanship Desirable (but not essential): IRTEC accreditation EV/Hybrid vehicle qualifications HGV Class 1 or Class 2 licence What s on Offer Competitive salary up to £54,000 plus overtime Ongoing training and development opportunities Support with gaining further accreditations A positive, supportive, and forward-thinking working environment This is an excellent opportunity to join a company that genuinely invests in its people. Skills can be developed but a strong work ethic and the drive to deliver outstanding service are essential.
Jul 31, 2026
Full time
Workshop Vehicle Engineer (HGV Technician) Day Shifts Salary up to £54,000 + Overtime Our client is a well-established business with a long-standing reputation for delivering first-class fleet solutions. Their commitment to high workshop standards plays a key role in ensuring exceptional service and customer satisfaction. The Role You ll be responsible for inspecting, maintaining, and repairing a varied and diverse fleet. This is a hands-on role offering exposure to a wide range of vehicles, including: Heavy Goods Vehicles (HGVs) Refuse Collection Vehicles (RCVs) Road sweepers Hook loaders Light commercial vehicles (vans) Trailers and tippers Key Responsibilities Duties include, but are not limited to: Routine and preventative maintenance MOT preparation Servicing to DVSA standards 6- or 8-weekly safety inspections Diagnosing and rectifying faults Chassis and fabrication work Working with hydraulics and pneumatics Electrical diagnostics, wiring, and repairs Continuous improvement of vehicle standards About You We welcome applications from both qualified and time-served technicians, as well as those looking to further develop their skills. You will ideally have: A recognised qualification (City & Guilds, NVQ, or equivalent) A strong understanding of commercial vehicle mechanics A proactive attitude and commitment to high-quality workmanship Desirable (but not essential): IRTEC accreditation EV/Hybrid vehicle qualifications HGV Class 1 or Class 2 licence What s on Offer Competitive salary up to £54,000 plus overtime Ongoing training and development opportunities Support with gaining further accreditations A positive, supportive, and forward-thinking working environment This is an excellent opportunity to join a company that genuinely invests in its people. Skills can be developed but a strong work ethic and the drive to deliver outstanding service are essential.
Assembly Technician Slough Working hours will be 7.30am-4pm or something similar, 15.08 per hour holiday paid Proactive are looking for a practical, reliable Assembly Technician to join our clients workshop team. If you enjoy hands-on work, have an eye for detail and take pride in producing high-quality work, we'd love to hear from you. The is role purely mechanical assembly assembling conveyor systems. In this role, you'll assemble and fabricate products and help to ensure everything manufactured meets the highest quality standards. Key responsibilities: Assemble and fabricate mechanical products and components using engineering drawings and work instructions Work closely with colleagues to meet production deadlines. Keep your work area clean, organised, and safe. Support other workshop activities when needed. Follow all quality and health & safety procedures. Required Experience: Previous experience in an engineering, manufacturing, or workshop environment. Able to read engineering drawings and technical instructions. Good practical skills and attention to detail. A positive attitude and willingness to learn. Someone who works well both independently and as part of a team. Good problem-solving skills and the ability to work under pressure. Please send us your CV if you are interested Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Jul 31, 2026
Full time
Assembly Technician Slough Working hours will be 7.30am-4pm or something similar, 15.08 per hour holiday paid Proactive are looking for a practical, reliable Assembly Technician to join our clients workshop team. If you enjoy hands-on work, have an eye for detail and take pride in producing high-quality work, we'd love to hear from you. The is role purely mechanical assembly assembling conveyor systems. In this role, you'll assemble and fabricate products and help to ensure everything manufactured meets the highest quality standards. Key responsibilities: Assemble and fabricate mechanical products and components using engineering drawings and work instructions Work closely with colleagues to meet production deadlines. Keep your work area clean, organised, and safe. Support other workshop activities when needed. Follow all quality and health & safety procedures. Required Experience: Previous experience in an engineering, manufacturing, or workshop environment. Able to read engineering drawings and technical instructions. Good practical skills and attention to detail. A positive attitude and willingness to learn. Someone who works well both independently and as part of a team. Good problem-solving skills and the ability to work under pressure. Please send us your CV if you are interested Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Job Title: Electrical Technician Location: South Yorkshire (UK wide travel) Salary: Competitive (DOE) We're partnering with a specialist engineering company that designs and builds bespoke systems for customers across a range of high-technology industries. Due to continued growth, they're looking for an experienced Electrical Technician to join their expanding engineering team. This is a hands-on role involving the assembly, wiring, testing, installation, and commissioning of bespoke systems. Working on a wide variety of custom-built projects, you'll split your time between the workshop and customer sites across the UK. About the Role Assemble and wire bespoke electrical control panels and instrumentation systems. Build 19" rack systems, wiring looms, harnesses, interface boxes, and control units. Carry out mechanical assembly of enclosures, frames, and electromechanical systems. Perform electrical testing, including continuity, functional, and fault-finding activities. Install and commission systems at customer sites, including single- and three-phase electrical installations. Complete electrical wiring, cable routing, termination, and equipment installation. Produce and maintain testing records, site reports, RAMS, and engineering documentation. Support workshop operations, stock control, and continuous improvement activities. Work closely with engineers and project teams to deliver high-quality bespoke systems. About You NVQ Level 3 (or equivalent) in Electrical Installation, Electrical Maintenance, or a related discipline. 18th Edition Wiring Regulations qualification. Previous experience building and wiring electrical control panels or bespoke electrical systems. Ability to read and interpret electrical schematics and engineering drawings. Experience with panel layout, component mounting, cable routing, termination, and panel fabrication. Practical electrical fault-finding and troubleshooting skills. Experience installing and commissioning electrical systems on customer sites. Good IT skills, including Microsoft Office and electronic documentation. Strong understanding of electrical safety regulations and safe working practices. Full UK driving licence and willingness to travel across the UK (approximately 25%). Desirable Skills Experience working with Siemens, Beckhoff, or other PLC-based control hardware. National Instruments (NI) instrumentation experience. City & Guilds 2391 (Inspection & Testing) or equivalent. ECS/JIB Card. AM2 qualification. IPAF and/or PASMA certification. Experience with EPLAN or similar electrical documentation software. Please note, we cannot offer sponsorship for this position. If interested, please send over an updated CV.
Jul 31, 2026
Full time
Job Title: Electrical Technician Location: South Yorkshire (UK wide travel) Salary: Competitive (DOE) We're partnering with a specialist engineering company that designs and builds bespoke systems for customers across a range of high-technology industries. Due to continued growth, they're looking for an experienced Electrical Technician to join their expanding engineering team. This is a hands-on role involving the assembly, wiring, testing, installation, and commissioning of bespoke systems. Working on a wide variety of custom-built projects, you'll split your time between the workshop and customer sites across the UK. About the Role Assemble and wire bespoke electrical control panels and instrumentation systems. Build 19" rack systems, wiring looms, harnesses, interface boxes, and control units. Carry out mechanical assembly of enclosures, frames, and electromechanical systems. Perform electrical testing, including continuity, functional, and fault-finding activities. Install and commission systems at customer sites, including single- and three-phase electrical installations. Complete electrical wiring, cable routing, termination, and equipment installation. Produce and maintain testing records, site reports, RAMS, and engineering documentation. Support workshop operations, stock control, and continuous improvement activities. Work closely with engineers and project teams to deliver high-quality bespoke systems. About You NVQ Level 3 (or equivalent) in Electrical Installation, Electrical Maintenance, or a related discipline. 18th Edition Wiring Regulations qualification. Previous experience building and wiring electrical control panels or bespoke electrical systems. Ability to read and interpret electrical schematics and engineering drawings. Experience with panel layout, component mounting, cable routing, termination, and panel fabrication. Practical electrical fault-finding and troubleshooting skills. Experience installing and commissioning electrical systems on customer sites. Good IT skills, including Microsoft Office and electronic documentation. Strong understanding of electrical safety regulations and safe working practices. Full UK driving licence and willingness to travel across the UK (approximately 25%). Desirable Skills Experience working with Siemens, Beckhoff, or other PLC-based control hardware. National Instruments (NI) instrumentation experience. City & Guilds 2391 (Inspection & Testing) or equivalent. ECS/JIB Card. AM2 qualification. IPAF and/or PASMA certification. Experience with EPLAN or similar electrical documentation software. Please note, we cannot offer sponsorship for this position. If interested, please send over an updated CV.
Trainee Engineering Roles Dorset Up to £15.59 per hour Have you recently finished studying at college and keen to put those new skills to work? Looking to move into a role where each day you fine tune your skills? Fed up with your current role and wanting to find a career with progression? If you re reading this advert, you re likely mechanically minded, and you want a real job where you're doing something with your hands. Having been established for 40+ years Rubicon are the recruitment partner to many of the best Engineering & Manufacturing businesses in the local area. Currently supporting dozens of established businesses in securing the next generation of skilled Technicians and Engineers . In recent months we ve placed Trainee Engineering applicantsinto some of the below positions: Trainee Electronics role Metal Treatment positions Trainee Welding & Fabrication Mechanical Assembly Trainee Vehicle Technicians Junior Technical Sales roles Engineering support functions Although varying dependant on the role, Trainee Engineering applicantscould benefit from: Weekly pay Guaranteed hours every week no uncertainty, no zero hours Typically, Monday to Friday with NO weekends Overtime paid at a premium Annual performance bonuses Full on-the-job training with clear skill development from day one Personal protective equipment A supportive working environment where your development is taken seriously Various shifts depending on the role Locations including Poole, Wareham, Ferndown, Salisbury and Blandford Applicants to these Trainee Engineering roles are likely to have: Have recently completed a STEM related course OR Confidence using hand tools & power tools OR Hobbies or interests that include building / repairing things (model making, car maintenance + DIY) OR A practical, hands-on background study or work in engineering, mechanics, construction OR At Rubicon we ve a constant flow of new and ever varying roles coming in depending on our client basis and their needs. If you're ready to turn your practical skills into a real career in manufacturing or engineering, we have Trainee Engineering roles across Dorset ready to match you with the right business. Apply today with an up-to-date CV or call Beth Carey on (phone number removed) Rubicon for more information.
Jul 31, 2026
Seasonal
Trainee Engineering Roles Dorset Up to £15.59 per hour Have you recently finished studying at college and keen to put those new skills to work? Looking to move into a role where each day you fine tune your skills? Fed up with your current role and wanting to find a career with progression? If you re reading this advert, you re likely mechanically minded, and you want a real job where you're doing something with your hands. Having been established for 40+ years Rubicon are the recruitment partner to many of the best Engineering & Manufacturing businesses in the local area. Currently supporting dozens of established businesses in securing the next generation of skilled Technicians and Engineers . In recent months we ve placed Trainee Engineering applicantsinto some of the below positions: Trainee Electronics role Metal Treatment positions Trainee Welding & Fabrication Mechanical Assembly Trainee Vehicle Technicians Junior Technical Sales roles Engineering support functions Although varying dependant on the role, Trainee Engineering applicantscould benefit from: Weekly pay Guaranteed hours every week no uncertainty, no zero hours Typically, Monday to Friday with NO weekends Overtime paid at a premium Annual performance bonuses Full on-the-job training with clear skill development from day one Personal protective equipment A supportive working environment where your development is taken seriously Various shifts depending on the role Locations including Poole, Wareham, Ferndown, Salisbury and Blandford Applicants to these Trainee Engineering roles are likely to have: Have recently completed a STEM related course OR Confidence using hand tools & power tools OR Hobbies or interests that include building / repairing things (model making, car maintenance + DIY) OR A practical, hands-on background study or work in engineering, mechanics, construction OR At Rubicon we ve a constant flow of new and ever varying roles coming in depending on our client basis and their needs. If you're ready to turn your practical skills into a real career in manufacturing or engineering, we have Trainee Engineering roles across Dorset ready to match you with the right business. Apply today with an up-to-date CV or call Beth Carey on (phone number removed) Rubicon for more information.
An opportunity has arisen for a Welder / Fabricator to join a well-established engineering manufacturer specialising in the design and production of high-quality agricultural machinery. As a Welder / Fabricator, you will carry out MIG welding and fabrication of components used in specialist machinery. This is a 12-week temp-to-perm role offering a salary of £15.80 per hour and benefits. You will be responsible for: Collaborate with the production team to meet daily and weekly manufacturing targets. Produce high-quality, accurate and consistent welds on materials ranging from 1.5mm to 20mm thick. Ensure all welds and fabricated assemblies are completed to a consistently high quality standard. Contribute to the assembly of precision-engineered machinery supplied to customers worldwide. What we are looking for: Previously worked as a MIG welder, Welder, Fabricator, Welder Fabricator, Fabricator Welder, Welding Technician or in a similar role. Prior MIG welding experience. Experience welding heavy machinery, agricultural equipment, plant machinery, or similar heavy fabrication environments. Possess your own safety boots. Full driving licence and own transport. What's on offer: Competitive salary 31 days' holiday, including bank holidays. Christmas shutdown Production bonus scheme Enhanced overtime rates Company sick pay Healthcare scheme Free on-site parking Apply today if you're an experienced Welder / Fabricator looking to join a respected engineering manufacturer where your skills will be recognised and developed. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Jul 31, 2026
Full time
An opportunity has arisen for a Welder / Fabricator to join a well-established engineering manufacturer specialising in the design and production of high-quality agricultural machinery. As a Welder / Fabricator, you will carry out MIG welding and fabrication of components used in specialist machinery. This is a 12-week temp-to-perm role offering a salary of £15.80 per hour and benefits. You will be responsible for: Collaborate with the production team to meet daily and weekly manufacturing targets. Produce high-quality, accurate and consistent welds on materials ranging from 1.5mm to 20mm thick. Ensure all welds and fabricated assemblies are completed to a consistently high quality standard. Contribute to the assembly of precision-engineered machinery supplied to customers worldwide. What we are looking for: Previously worked as a MIG welder, Welder, Fabricator, Welder Fabricator, Fabricator Welder, Welding Technician or in a similar role. Prior MIG welding experience. Experience welding heavy machinery, agricultural equipment, plant machinery, or similar heavy fabrication environments. Possess your own safety boots. Full driving licence and own transport. What's on offer: Competitive salary 31 days' holiday, including bank holidays. Christmas shutdown Production bonus scheme Enhanced overtime rates Company sick pay Healthcare scheme Free on-site parking Apply today if you're an experienced Welder / Fabricator looking to join a respected engineering manufacturer where your skills will be recognised and developed. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
CMM Metrology Technician-Swindon- 45,000 About the Role We are seeking a highly capable CMM Metrology Technician to join a growing aerospace manufacturing team, supporting the production and validation of advanced Uncrewed Aerial Systems (UAS) . This is an exciting opportunity to work within a cutting-edge manufacturing environment focused on precision engineering, dimensional verification and continuous quality improvement within an AS9100-compliant aerospace setting. The successful candidate will play a vital role in ensuring all manufactured components, assemblies and subcontract-supplied parts meet exacting dimensional and quality requirements. Key Responsibilities Perform dimensional inspection and verification of machined, fabricated, additive manufactured and assembled aerospace components using CMM and laser scanning technologies. Program, operate and maintain Coordinate Measuring Machines (CMMs) for first-off, in-process and final inspection activities. Complete First Article Inspection Reports (FAIRs) in accordance with AS9102 requirements. Interpret engineering drawings, 3D CAD models and GD&T specifications. Produce detailed inspection reports, deviation reports and dimensional data packs. Support root cause investigations into dimensional non-conformances and assist with corrective actions. Verify both internally manufactured components and subcontract-supplied parts. Support manufacturing and engineering teams with process capability studies, Measurement Systems Analysis (MSA), Gauge Repeatability & Reproducibility (GR&R) and continuous improvement initiatives. Ensure all metrology activities comply with AS9100 quality standards and traceability requirements. Maintain calibration awareness and control of inspection and measurement equipment. Essential Skills & Experience Proven experience as a CMM Technician, Metrology Technician or Quality Inspector within aerospace, defence or another high-precision engineering environment. Strong understanding of GD&T and engineering drawings. Experience conducting AS9102 First Article Inspection Reports (FAIRs) . Working knowledge of AS9100 quality management systems. Experience producing dimensional inspection reports and non-conformance documentation. Excellent attention to detail with a commitment to right-first-time quality. Strong communication skills with the ability to work closely alongside manufacturing, CNC machining and engineering teams. Desirable Skills Experience with Hexagon CMM systems. Knowledge of PC-DMIS , QUINDOS or similar CMM software. Experience using laser scanning or 3D metrology systems. Familiarity with portable measuring arms and Hexagon laser scanners. Experience inspecting complex 5-axis machined aerospace components. Exposure to composite materials, additive manufacturing or UAS airframe structures. Understanding of surface profile analysis and reverse engineering inspection techniques. Qualifications Engineering or Manufacturing qualification (NVQ, BTEC, HNC or equivalent) preferred. Formal CMM programming certification advantageous. Metrology or Quality Inspection training desirable If you're passionate about precision engineering and want to play a key role in the manufacture of advanced aerospace systems, we'd love to hear from you.
Jul 31, 2026
Full time
CMM Metrology Technician-Swindon- 45,000 About the Role We are seeking a highly capable CMM Metrology Technician to join a growing aerospace manufacturing team, supporting the production and validation of advanced Uncrewed Aerial Systems (UAS) . This is an exciting opportunity to work within a cutting-edge manufacturing environment focused on precision engineering, dimensional verification and continuous quality improvement within an AS9100-compliant aerospace setting. The successful candidate will play a vital role in ensuring all manufactured components, assemblies and subcontract-supplied parts meet exacting dimensional and quality requirements. Key Responsibilities Perform dimensional inspection and verification of machined, fabricated, additive manufactured and assembled aerospace components using CMM and laser scanning technologies. Program, operate and maintain Coordinate Measuring Machines (CMMs) for first-off, in-process and final inspection activities. Complete First Article Inspection Reports (FAIRs) in accordance with AS9102 requirements. Interpret engineering drawings, 3D CAD models and GD&T specifications. Produce detailed inspection reports, deviation reports and dimensional data packs. Support root cause investigations into dimensional non-conformances and assist with corrective actions. Verify both internally manufactured components and subcontract-supplied parts. Support manufacturing and engineering teams with process capability studies, Measurement Systems Analysis (MSA), Gauge Repeatability & Reproducibility (GR&R) and continuous improvement initiatives. Ensure all metrology activities comply with AS9100 quality standards and traceability requirements. Maintain calibration awareness and control of inspection and measurement equipment. Essential Skills & Experience Proven experience as a CMM Technician, Metrology Technician or Quality Inspector within aerospace, defence or another high-precision engineering environment. Strong understanding of GD&T and engineering drawings. Experience conducting AS9102 First Article Inspection Reports (FAIRs) . Working knowledge of AS9100 quality management systems. Experience producing dimensional inspection reports and non-conformance documentation. Excellent attention to detail with a commitment to right-first-time quality. Strong communication skills with the ability to work closely alongside manufacturing, CNC machining and engineering teams. Desirable Skills Experience with Hexagon CMM systems. Knowledge of PC-DMIS , QUINDOS or similar CMM software. Experience using laser scanning or 3D metrology systems. Familiarity with portable measuring arms and Hexagon laser scanners. Experience inspecting complex 5-axis machined aerospace components. Exposure to composite materials, additive manufacturing or UAS airframe structures. Understanding of surface profile analysis and reverse engineering inspection techniques. Qualifications Engineering or Manufacturing qualification (NVQ, BTEC, HNC or equivalent) preferred. Formal CMM programming certification advantageous. Metrology or Quality Inspection training desirable If you're passionate about precision engineering and want to play a key role in the manufacture of advanced aerospace systems, we'd love to hear from you.
Jonathan Lee Recruitment Ltd
Blackburn, Lancashire
MECHANICAL MAINTENANCE ENGINEER Are you an experienced Mechanical Engineer, Maintenance Engineer, Mechanical Maintenance Engineer or Mechanical Maintenance Technician seeking a job opportunity and are you Level 3 qualified (or above) in an Engineering Discipline?! We are looking for a Mechanical Maintenance Engineer to join a leading manufacturing business in Blackburn, the working hours are 8.00am - 4.30pm Monday to Friday (paid 40 hour week), and the role comes with an annual salary of £40,000 p/a. Shift: Days Monday to Friday Salary: £40K Job Outline: This is a hands-on role on the tools, and you will be responsible for maintaining gearboxes, pumps, conveyors and motors, as well as carrying out hydraulic and pneumatic repairs, some basic welding and fabrication work will be required (as or when). Some administrative work will be required so you MUST be able to use Microsoft Office packages, primarily Word & Excel. What You Will Do: Ensure equipment is operated and maintained in a safe and reliable condition. Conduct effective risk assessments to promote safety for yourself and your team. Repair and troubleshoot mechanical issues to minimise downtime. Perform preventative maintenance to keep operations running smoothly. Analyse data to enhance equipment performance and efficiency. Manage projects within agreed budgets and time lines, ensuring quality results. What You Will Bring: You will have either completed an Engineering apprenticeship (or be qualified to an NVQ Level 3 minimum) Expertise in maintaining gearboxes, pumps, conveyors, and motors Hands-on experience with hydraulic and pneumatic repairs Experience with Microsoft Office Packages - particularly Word & Excel Knowledge/experience of non-woven manufacturing and technology (or related field) - Preferred Current or recent experinece in similar roles, maintenance technician, mechancial fitter, shift engineer, multi-skilled maintenance engineer, service engineer Location: The role is based in Blackburn (Lancashire) In Return: Very good working hours on day shift Monday - Friday Competetive slaary of £40K Good overall benefits and holiday allowance Proefesion and supportive engineering team Interested?: If you're ready to take the next step in your career as a Mechanical Maintenance Engineer, don't wait! Apply today to join this innovative company and make your mark in a role that truly matters. Let your skills shine and be part of something extraordinary. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jul 31, 2026
Full time
MECHANICAL MAINTENANCE ENGINEER Are you an experienced Mechanical Engineer, Maintenance Engineer, Mechanical Maintenance Engineer or Mechanical Maintenance Technician seeking a job opportunity and are you Level 3 qualified (or above) in an Engineering Discipline?! We are looking for a Mechanical Maintenance Engineer to join a leading manufacturing business in Blackburn, the working hours are 8.00am - 4.30pm Monday to Friday (paid 40 hour week), and the role comes with an annual salary of £40,000 p/a. Shift: Days Monday to Friday Salary: £40K Job Outline: This is a hands-on role on the tools, and you will be responsible for maintaining gearboxes, pumps, conveyors and motors, as well as carrying out hydraulic and pneumatic repairs, some basic welding and fabrication work will be required (as or when). Some administrative work will be required so you MUST be able to use Microsoft Office packages, primarily Word & Excel. What You Will Do: Ensure equipment is operated and maintained in a safe and reliable condition. Conduct effective risk assessments to promote safety for yourself and your team. Repair and troubleshoot mechanical issues to minimise downtime. Perform preventative maintenance to keep operations running smoothly. Analyse data to enhance equipment performance and efficiency. Manage projects within agreed budgets and time lines, ensuring quality results. What You Will Bring: You will have either completed an Engineering apprenticeship (or be qualified to an NVQ Level 3 minimum) Expertise in maintaining gearboxes, pumps, conveyors, and motors Hands-on experience with hydraulic and pneumatic repairs Experience with Microsoft Office Packages - particularly Word & Excel Knowledge/experience of non-woven manufacturing and technology (or related field) - Preferred Current or recent experinece in similar roles, maintenance technician, mechancial fitter, shift engineer, multi-skilled maintenance engineer, service engineer Location: The role is based in Blackburn (Lancashire) In Return: Very good working hours on day shift Monday - Friday Competetive slaary of £40K Good overall benefits and holiday allowance Proefesion and supportive engineering team Interested?: If you're ready to take the next step in your career as a Mechanical Maintenance Engineer, don't wait! Apply today to join this innovative company and make your mark in a role that truly matters. Let your skills shine and be part of something extraordinary. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Production Build Technician Long term contract 20 - 25 per hour The company design and manufacture electric vehicles used within harsh environments. Candidates ideally need to have automotive assembly and some form of high voltage/HV training Standard working hours - 7.30am-4pm Requirements: Mechanical + Electrical Knowledge Assembly & Fabrication Testing & Debugging Basic Machining, Fabrication or Welding Experience Software Competency, Engineering Drawing Interpretation Previous Experience in Automotive EV or Motorsport Experience Highly Beneficial All applicants must have strong communication skills and full eligibility to work in the UK. Please submit your CV if you are interested Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Jul 31, 2026
Contractor
Production Build Technician Long term contract 20 - 25 per hour The company design and manufacture electric vehicles used within harsh environments. Candidates ideally need to have automotive assembly and some form of high voltage/HV training Standard working hours - 7.30am-4pm Requirements: Mechanical + Electrical Knowledge Assembly & Fabrication Testing & Debugging Basic Machining, Fabrication or Welding Experience Software Competency, Engineering Drawing Interpretation Previous Experience in Automotive EV or Motorsport Experience Highly Beneficial All applicants must have strong communication skills and full eligibility to work in the UK. Please submit your CV if you are interested Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Panel Beater - Manchester Franchised Motor Dealership If you're an experienced Panel Beater or Panel Technician looking for your next opportunity, we'd like to hear from you. We're recruiting on behalf of a well-established dealership with a busy, professional bodyshop that values quality workmanship, teamwork and attention to detail. What's on offer Competitive basic salary with realistic on-target earnings of up to 43,850 40 hour working week, Monday to Friday, 8:00am - 4:30pm Occasional Saturday morning overtime A modern, well equipped bodyshop A stable, full time position with an established dealership As a Panel Technician, you'll be responsible for carrying out high-quality vehicle body repairs, restoring damaged vehicles to manufacturer standards, and working efficiently to meet workshop targets without compromising on quality. What We're Looking For: Proven experience as a Panel Beater or Panel Technician Relevant ATA accreditation Excellent repair and fabrication skills A strong eye for detail and commitment to delivering first class workmanship The ability to work both independently and as part of a team If you're looking for a role where your skills are recognised and rewarded, we'd love to hear from you. Apply today to find out more about this excellent opportunity. Who are you applying to? The Solution Automotive Recruitment have been placing candidates into the UK Motor Trade since 1999. We have a fantastic relationship with all our clients and candidates across the country, many very long standing relationships. If you are skilled and experienced Automotive candidate, we want to hear from you and rest assured, you'll be dealing with a person, not just a consultant! Unfortunately due to the volume of applications we get, we can only respond to the candidates who match the criteria set for this vacancy. We will retain your CV on our database and make contact as and when suitable vacancies arise. We will NEVER send your CV anywhere without your permission
Jul 31, 2026
Full time
Panel Beater - Manchester Franchised Motor Dealership If you're an experienced Panel Beater or Panel Technician looking for your next opportunity, we'd like to hear from you. We're recruiting on behalf of a well-established dealership with a busy, professional bodyshop that values quality workmanship, teamwork and attention to detail. What's on offer Competitive basic salary with realistic on-target earnings of up to 43,850 40 hour working week, Monday to Friday, 8:00am - 4:30pm Occasional Saturday morning overtime A modern, well equipped bodyshop A stable, full time position with an established dealership As a Panel Technician, you'll be responsible for carrying out high-quality vehicle body repairs, restoring damaged vehicles to manufacturer standards, and working efficiently to meet workshop targets without compromising on quality. What We're Looking For: Proven experience as a Panel Beater or Panel Technician Relevant ATA accreditation Excellent repair and fabrication skills A strong eye for detail and commitment to delivering first class workmanship The ability to work both independently and as part of a team If you're looking for a role where your skills are recognised and rewarded, we'd love to hear from you. Apply today to find out more about this excellent opportunity. Who are you applying to? The Solution Automotive Recruitment have been placing candidates into the UK Motor Trade since 1999. We have a fantastic relationship with all our clients and candidates across the country, many very long standing relationships. If you are skilled and experienced Automotive candidate, we want to hear from you and rest assured, you'll be dealing with a person, not just a consultant! Unfortunately due to the volume of applications we get, we can only respond to the candidates who match the criteria set for this vacancy. We will retain your CV on our database and make contact as and when suitable vacancies arise. We will NEVER send your CV anywhere without your permission
Permanent Role Proactive Personnel Ltd are currently recruiting for our client based in Lichfield for an experienced QA technician. You will be requierd to carry out inspections, maintain internal and industrial quality standards, support investigations and work closely with the production team. Responsibilities include: Conduct first-off, in-process and final inspections Read and interpret engineering drawings Perform dimensional inspections Use verniers, micrometers, height gauges and other inspection tools. Raise and support non-conformance Assist with internal quality audits Liaise with production, engineering and management regarding quality issues and topics. Maintain a safe and clean working environment. To be considered for the role, you must: Have previous experience in a QA role in a manufacturing environment. Be able to read and interpret engineering drawings Use inspection and measuring tools Work independently Have experience within fabrication, welding, machining or precision engineering environments. Knowledge of CMM equipment is desirable. Hours of work: 07:30 - 16:430 Monday - Thursday 07:30 - 12:00 Friday.
Jul 31, 2026
Full time
Permanent Role Proactive Personnel Ltd are currently recruiting for our client based in Lichfield for an experienced QA technician. You will be requierd to carry out inspections, maintain internal and industrial quality standards, support investigations and work closely with the production team. Responsibilities include: Conduct first-off, in-process and final inspections Read and interpret engineering drawings Perform dimensional inspections Use verniers, micrometers, height gauges and other inspection tools. Raise and support non-conformance Assist with internal quality audits Liaise with production, engineering and management regarding quality issues and topics. Maintain a safe and clean working environment. To be considered for the role, you must: Have previous experience in a QA role in a manufacturing environment. Be able to read and interpret engineering drawings Use inspection and measuring tools Work independently Have experience within fabrication, welding, machining or precision engineering environments. Knowledge of CMM equipment is desirable. Hours of work: 07:30 - 16:430 Monday - Thursday 07:30 - 12:00 Friday.
NORTH WEST AMBULANCE SERVICE Motor Vehicle Technician Keeping Frontline Ambulances Safe, Roadworthy and Ready to Respond The Role We are seeking a highly skilled and motivated Vehicle Technician / Fleet Engineer to join our Fleet Services team. This is a vital role supporting the maintenance and repair of a large and diverse fleet of emergency and non-emergency vehicles, ensuring they remain safe, reliable, roadworthy and available when our communities need them most. Working on frontline ambulances, rapid response vehicles, specialist HART vehicles, heavy goods vehicles and fleet support vehicles, you will use your advanced technical expertise to diagnose and repair complex mechanical, electrical and high-voltage faults. Your work will directly contribute to the delivery of safe patient care by helping to maximise vehicle availability and operational performance. This is an excellent opportunity for an experienced technician who enjoys working with cutting-edge vehicle technology and is committed to continuous professional development. Key Responsibilities As a Vehicle Technician / Fleet Engineer, you will: Carry out servicing, maintenance and repairs across a wide range of fleet vehicles, including emergency ambulances, patient transport vehicles, rapid response vehicles, HART vehicles, HGVs and support vehicles. Diagnose and repair complex faults across mechanical, electrical, electronic and high-voltage systems. Maintain petrol, diesel, hybrid and electric vehicle drive systems. Complete detailed vehicle inspections to Trust and DVSA standards. Perform welding, fabrication, vehicle modifications and specialist repairs where required. Operate advanced diagnostic equipment and manufacturer-specific systems to identify faults and determine effective repair solutions. Inspect, maintain and repair specialist equipment including: Vehicle lifting platforms and ramps Air conditioning systems Fire suppression systems Climate control systems Vehicle heating systems Hydraulic and pneumatic systems Work safely on vehicles at height and in confined spaces while adhering to all health and safety requirements. Maintain accurate repair records using fleet management, manufacturer diagnostic and DVSA systems. Provide technical advice and recommendations regarding vehicle safety, defects and roadworthiness. Support and mentor apprentices and new members of the team. Coordinate work allocated to Fleet Drivers and Workshop Assistants. Undertake off-site vehicle repairs, recovery work and breakdown support when required. Assist in identifying opportunities for service improvement and fleet reliability enhancements. Contribute to the evaluation and trial of new equipment, systems and technologies. What We're Looking For Essential Qualifications & Licences NVQ Level 3 in Vehicle Maintenance and Repair (or equivalent). Good standard of education, including a minimum of 3 GCSEs (or equivalent). Full UK Manual Driving Licence. Evidence of Continuing Professional Development (CPD). Desirable Qualifications (or willingness to work towards) C1 Driving Licence. MOT Tester Qualification (Class 4 & 7). High Voltage / Hybrid Vehicle Maintenance Qualification (NVQ Level 2, 3 or 4). Welding Certification. Air Conditioning F-Gas Certification. IRTEC Accreditation or equivalent. Ambulance Equipment Training (e.g. Stryker, Ferno). Fire Suppression System Training. Skills & Experience You will ideally have: Significant experience within the motor vehicle industry. Strong knowledge of vehicle mechanical, electrical and electronic systems. Experience using advanced diagnostic software and equipment. Excellent fault-finding and problem-solving skills. Strong communication skills with the ability to explain technical information clearly. A methodical approach and high attention to detail. The ability to work independently and as part of a team. Excellent customer service and relationship-building skills. The ability to work to deadlines and prioritise workloads effectively. A commitment to maintaining the highest standards of safety and workmanship. A comprehensive set of personal tools relevant to the role. Working Environment This is a physically demanding position involving: Frequent handling and lifting of heavy vehicle components. Working in workshop and roadside environments. Exposure to hazardous substances and adverse weather conditions. Working at height and within confined spaces. Participation in out-of-hours or off-site repairs when required. Appropriate training, equipment and Personal Protective Equipment (PPE) will be provided. Our Values We are looking for individuals who demonstrate our core values: Working Together Collaborative, inclusive and respectful in everything you do. Being at Our Best Professional, adaptable and committed to delivering high-quality work. Making a Difference Compassionate, kind and committed to supporting excellent patient services. Blue Arrow is proud to be a Disability Confident Employer and is committed to helping find great work opportunities for great people.
Jul 31, 2026
Full time
NORTH WEST AMBULANCE SERVICE Motor Vehicle Technician Keeping Frontline Ambulances Safe, Roadworthy and Ready to Respond The Role We are seeking a highly skilled and motivated Vehicle Technician / Fleet Engineer to join our Fleet Services team. This is a vital role supporting the maintenance and repair of a large and diverse fleet of emergency and non-emergency vehicles, ensuring they remain safe, reliable, roadworthy and available when our communities need them most. Working on frontline ambulances, rapid response vehicles, specialist HART vehicles, heavy goods vehicles and fleet support vehicles, you will use your advanced technical expertise to diagnose and repair complex mechanical, electrical and high-voltage faults. Your work will directly contribute to the delivery of safe patient care by helping to maximise vehicle availability and operational performance. This is an excellent opportunity for an experienced technician who enjoys working with cutting-edge vehicle technology and is committed to continuous professional development. Key Responsibilities As a Vehicle Technician / Fleet Engineer, you will: Carry out servicing, maintenance and repairs across a wide range of fleet vehicles, including emergency ambulances, patient transport vehicles, rapid response vehicles, HART vehicles, HGVs and support vehicles. Diagnose and repair complex faults across mechanical, electrical, electronic and high-voltage systems. Maintain petrol, diesel, hybrid and electric vehicle drive systems. Complete detailed vehicle inspections to Trust and DVSA standards. Perform welding, fabrication, vehicle modifications and specialist repairs where required. Operate advanced diagnostic equipment and manufacturer-specific systems to identify faults and determine effective repair solutions. Inspect, maintain and repair specialist equipment including: Vehicle lifting platforms and ramps Air conditioning systems Fire suppression systems Climate control systems Vehicle heating systems Hydraulic and pneumatic systems Work safely on vehicles at height and in confined spaces while adhering to all health and safety requirements. Maintain accurate repair records using fleet management, manufacturer diagnostic and DVSA systems. Provide technical advice and recommendations regarding vehicle safety, defects and roadworthiness. Support and mentor apprentices and new members of the team. Coordinate work allocated to Fleet Drivers and Workshop Assistants. Undertake off-site vehicle repairs, recovery work and breakdown support when required. Assist in identifying opportunities for service improvement and fleet reliability enhancements. Contribute to the evaluation and trial of new equipment, systems and technologies. What We're Looking For Essential Qualifications & Licences NVQ Level 3 in Vehicle Maintenance and Repair (or equivalent). Good standard of education, including a minimum of 3 GCSEs (or equivalent). Full UK Manual Driving Licence. Evidence of Continuing Professional Development (CPD). Desirable Qualifications (or willingness to work towards) C1 Driving Licence. MOT Tester Qualification (Class 4 & 7). High Voltage / Hybrid Vehicle Maintenance Qualification (NVQ Level 2, 3 or 4). Welding Certification. Air Conditioning F-Gas Certification. IRTEC Accreditation or equivalent. Ambulance Equipment Training (e.g. Stryker, Ferno). Fire Suppression System Training. Skills & Experience You will ideally have: Significant experience within the motor vehicle industry. Strong knowledge of vehicle mechanical, electrical and electronic systems. Experience using advanced diagnostic software and equipment. Excellent fault-finding and problem-solving skills. Strong communication skills with the ability to explain technical information clearly. A methodical approach and high attention to detail. The ability to work independently and as part of a team. Excellent customer service and relationship-building skills. The ability to work to deadlines and prioritise workloads effectively. A commitment to maintaining the highest standards of safety and workmanship. A comprehensive set of personal tools relevant to the role. Working Environment This is a physically demanding position involving: Frequent handling and lifting of heavy vehicle components. Working in workshop and roadside environments. Exposure to hazardous substances and adverse weather conditions. Working at height and within confined spaces. Participation in out-of-hours or off-site repairs when required. Appropriate training, equipment and Personal Protective Equipment (PPE) will be provided. Our Values We are looking for individuals who demonstrate our core values: Working Together Collaborative, inclusive and respectful in everything you do. Being at Our Best Professional, adaptable and committed to delivering high-quality work. Making a Difference Compassionate, kind and committed to supporting excellent patient services. Blue Arrow is proud to be a Disability Confident Employer and is committed to helping find great work opportunities for great people.
The Company Our client is a well-established environmental services business with over 50 years of experience supporting customers across construction, manufacturing, agriculture, commercial and public sectors. Operating a modern fleet of heavy plant and recycling equipment, they continue to invest in both their facilities and engineering team. Due to continued growth, they are looking to recruit an experienced Plant Fitter to join their workshop in Devizes. The Role As a Plant Fitter, you'll be responsible for maintaining and repairing a varied fleet of heavy plant and recycling equipment, ensuring machinery is safe, reliable and operating at maximum efficiency. The role combines planned maintenance with fault finding and reactive repairs, offering plenty of variety and technical challenge. Responsibilities Service, maintain and repair heavy plant and recycling machinery. Diagnose and rectify mechanical, hydraulic and electrical faults. Carry out planned preventative maintenance and respond to breakdowns. Complete inspections and ensure equipment meets safety standards. Accurately record maintenance activities and completed repairs. Work closely with the operations team to minimise downtime. About You We're interested in candidates from backgrounds such as Plant Fitter, Heavy Plant Engineer, Agricultural Engineer, HGV Technician or REME Vehicle Mechanic. You should have: Experience maintaining heavy plant, agricultural machinery or similar equipment. Strong mechanical fault-finding skills with knowledge of hydraulic and diesel systems. Welding and fabrication experience would be advantageous. A recognised engineering qualification (NVQ, City & Guilds or equivalent) is desirable. A proactive approach with excellent problem-solving skills. A full UK Driving Licence. What's On Offer Competitive hourly rate with extensive overtime opportunities. Stable, long-term employment with an established local business. Ongoing training and development. Modern workshop and well-maintained fleet. Pension scheme and holiday entitlement.
Jul 31, 2026
Full time
The Company Our client is a well-established environmental services business with over 50 years of experience supporting customers across construction, manufacturing, agriculture, commercial and public sectors. Operating a modern fleet of heavy plant and recycling equipment, they continue to invest in both their facilities and engineering team. Due to continued growth, they are looking to recruit an experienced Plant Fitter to join their workshop in Devizes. The Role As a Plant Fitter, you'll be responsible for maintaining and repairing a varied fleet of heavy plant and recycling equipment, ensuring machinery is safe, reliable and operating at maximum efficiency. The role combines planned maintenance with fault finding and reactive repairs, offering plenty of variety and technical challenge. Responsibilities Service, maintain and repair heavy plant and recycling machinery. Diagnose and rectify mechanical, hydraulic and electrical faults. Carry out planned preventative maintenance and respond to breakdowns. Complete inspections and ensure equipment meets safety standards. Accurately record maintenance activities and completed repairs. Work closely with the operations team to minimise downtime. About You We're interested in candidates from backgrounds such as Plant Fitter, Heavy Plant Engineer, Agricultural Engineer, HGV Technician or REME Vehicle Mechanic. You should have: Experience maintaining heavy plant, agricultural machinery or similar equipment. Strong mechanical fault-finding skills with knowledge of hydraulic and diesel systems. Welding and fabrication experience would be advantageous. A recognised engineering qualification (NVQ, City & Guilds or equivalent) is desirable. A proactive approach with excellent problem-solving skills. A full UK Driving Licence. What's On Offer Competitive hourly rate with extensive overtime opportunities. Stable, long-term employment with an established local business. Ongoing training and development. Modern workshop and well-maintained fleet. Pension scheme and holiday entitlement.
CAD Technician Based in Eye, Suffolk Monday to Friday - 9.00am till 5.00pm Permanent Salary dependent on experience Role Overview We are seeking a motivated and detail-oriented Design Engineer to join our client s team in Eye, Suffolk. This is an exciting opportunity to work on customer-focused engineering projects, producing accurate designs, drawings, and Bills of Materials that support efficient manufacturing and project delivery. Working closely with engineering, production, and project teams, you'll play a key role in developing innovative design solutions, enhancing 3D design capabilities, and ensuring products are delivered safely, accurately, and to the highest standards. Ideal for someone with a strong engineering background who enjoys problem-solving, collaboration, and making a real impact. Duties Include Produce and review approval, fabrication, and construction drawings, ensuring accuracy and delivery within agreed timescales. Create and check Bills of Materials (BOMs) and parts lists, ensuring they are accurate, up to date, and released efficiently to production. Work closely with customers, colleagues, and manufacturing teams to ensure clear communication and the smooth flow of information. Support the ongoing development and use of Autodesk Inventor 3D and Vault Professional across the Engineering & Design team. Apply Design for Manufacture principles and value-engineering techniques to deliver practical, cost-effective solutions. Follow engineering best practice to design out hazards and minimise risk wherever reasonably possible. Contribute ideas and initiatives that improve processes, efficiency, and overall team performance. Actively support Continuous Improvement, Lean Manufacturing, and ISO 9001 quality initiatives to enhance business performance. Skills and Attributes Proficient in Autodesk Inventor 3D, SolidWorks, or similar 3D CAD software, along with AutoCAD. Able to work independently, using initiative to deliver high-quality, accurate work within deadlines. Strong engineering and manufacturing background with sound technical knowledge. Experience creating and maintaining Bills of Materials (BOMs). Familiarity with ERP systems would be advantageous. Degree, HND, or equivalent qualification in Engineering, Manufacturing, or a related discipline, or relevant industry experience. Knowledge of iLogic, Python, or other automation/programming tools would be beneficial. Company Benefits Enhanced company pension scheme with employer contributions of up to 7% for long-serving employees. Free onsite parking. Life assurance cover of 3x annual basic salary. Employee Benefits Programme offering exclusive discounts on high street brands, holidays, days out, dining, and more. Access to a range of health and wellbeing support tools. GP on Demand service, confidential helplines, and one-to-one counselling support. 23 days annual leave, increasing to 25 days with service, plus bank holidays. For more information regarding this role, please submit a CV to (url removed) or call (phone number removed)!
Jul 31, 2026
Full time
CAD Technician Based in Eye, Suffolk Monday to Friday - 9.00am till 5.00pm Permanent Salary dependent on experience Role Overview We are seeking a motivated and detail-oriented Design Engineer to join our client s team in Eye, Suffolk. This is an exciting opportunity to work on customer-focused engineering projects, producing accurate designs, drawings, and Bills of Materials that support efficient manufacturing and project delivery. Working closely with engineering, production, and project teams, you'll play a key role in developing innovative design solutions, enhancing 3D design capabilities, and ensuring products are delivered safely, accurately, and to the highest standards. Ideal for someone with a strong engineering background who enjoys problem-solving, collaboration, and making a real impact. Duties Include Produce and review approval, fabrication, and construction drawings, ensuring accuracy and delivery within agreed timescales. Create and check Bills of Materials (BOMs) and parts lists, ensuring they are accurate, up to date, and released efficiently to production. Work closely with customers, colleagues, and manufacturing teams to ensure clear communication and the smooth flow of information. Support the ongoing development and use of Autodesk Inventor 3D and Vault Professional across the Engineering & Design team. Apply Design for Manufacture principles and value-engineering techniques to deliver practical, cost-effective solutions. Follow engineering best practice to design out hazards and minimise risk wherever reasonably possible. Contribute ideas and initiatives that improve processes, efficiency, and overall team performance. Actively support Continuous Improvement, Lean Manufacturing, and ISO 9001 quality initiatives to enhance business performance. Skills and Attributes Proficient in Autodesk Inventor 3D, SolidWorks, or similar 3D CAD software, along with AutoCAD. Able to work independently, using initiative to deliver high-quality, accurate work within deadlines. Strong engineering and manufacturing background with sound technical knowledge. Experience creating and maintaining Bills of Materials (BOMs). Familiarity with ERP systems would be advantageous. Degree, HND, or equivalent qualification in Engineering, Manufacturing, or a related discipline, or relevant industry experience. Knowledge of iLogic, Python, or other automation/programming tools would be beneficial. Company Benefits Enhanced company pension scheme with employer contributions of up to 7% for long-serving employees. Free onsite parking. Life assurance cover of 3x annual basic salary. Employee Benefits Programme offering exclusive discounts on high street brands, holidays, days out, dining, and more. Access to a range of health and wellbeing support tools. GP on Demand service, confidential helplines, and one-to-one counselling support. 23 days annual leave, increasing to 25 days with service, plus bank holidays. For more information regarding this role, please submit a CV to (url removed) or call (phone number removed)!
We are recruiting on behalf of our client for the position of Classic Car Technician in Woking, Surrey. This is an excellent opportunity for a highly skilled motor trade professional with experience in vintage vehicle restoration. Benefits of a Classic Car Technician: Competitive salary of £40,000 to £45,000 per annum Monday to Friday working hours, 8.30 am to 5 pm, with no weekends Private healthcare, dental, and optical cover after successful probation Auto-enrolment pension scheme with employer contributions 20 days holiday entitlement in the first year, increasing with length of service Opportunity to work with a reputable, well-established classic car restoration company with over 20 years of heritage Duties of a Classic Car Technician: Conducting detailed restoration work on classic and vintage cars, including fabricating, welding, and full ground-up restorations Rebuilding suspensions, carburettors, and other mechanical components Performing full vehicle reconstructions rather than simple bolt-on tasks Applying craftsmanship and precision to deliver high-quality restorations Supporting the workshop team with technical knowledge and skills Ensuring all work complies with safety and quality standards Requirements of a Classic Car Technician: Proven experience as a motor engineer, with a minimum of 5 years within a workshop environment Extensive knowledge in classic car restoration, including carburettor and suspension rebuilds Skilled in fabricating, welding, and performing detailed mechanical restorations Passionate about vintage and classic vehicles with a keen eye for quality Enthusiastic, eager to learn, and capable of working independently or within a team Strong commitment to craftsmanship and safety standards This role offers the chance to join a prestigious classic car restoration business with an outstanding reputation locally and internationally. If you possess the required skills and experience, and are passionate about vintage cars, we invite you to apply. Contact Liam Buffenbarger, Automotive Recruitment Specialist at Perfect Placement covering Woking and Surrey, today to discover more about this fantastic Classic Car Technician opportunity. Perfect Placement are the UK s Leading Automotive Recruitment Agency so if you are looking for a Job get in touch today.
Jul 31, 2026
Full time
We are recruiting on behalf of our client for the position of Classic Car Technician in Woking, Surrey. This is an excellent opportunity for a highly skilled motor trade professional with experience in vintage vehicle restoration. Benefits of a Classic Car Technician: Competitive salary of £40,000 to £45,000 per annum Monday to Friday working hours, 8.30 am to 5 pm, with no weekends Private healthcare, dental, and optical cover after successful probation Auto-enrolment pension scheme with employer contributions 20 days holiday entitlement in the first year, increasing with length of service Opportunity to work with a reputable, well-established classic car restoration company with over 20 years of heritage Duties of a Classic Car Technician: Conducting detailed restoration work on classic and vintage cars, including fabricating, welding, and full ground-up restorations Rebuilding suspensions, carburettors, and other mechanical components Performing full vehicle reconstructions rather than simple bolt-on tasks Applying craftsmanship and precision to deliver high-quality restorations Supporting the workshop team with technical knowledge and skills Ensuring all work complies with safety and quality standards Requirements of a Classic Car Technician: Proven experience as a motor engineer, with a minimum of 5 years within a workshop environment Extensive knowledge in classic car restoration, including carburettor and suspension rebuilds Skilled in fabricating, welding, and performing detailed mechanical restorations Passionate about vintage and classic vehicles with a keen eye for quality Enthusiastic, eager to learn, and capable of working independently or within a team Strong commitment to craftsmanship and safety standards This role offers the chance to join a prestigious classic car restoration business with an outstanding reputation locally and internationally. If you possess the required skills and experience, and are passionate about vintage cars, we invite you to apply. Contact Liam Buffenbarger, Automotive Recruitment Specialist at Perfect Placement covering Woking and Surrey, today to discover more about this fantastic Classic Car Technician opportunity. Perfect Placement are the UK s Leading Automotive Recruitment Agency so if you are looking for a Job get in touch today.
Post Process Technician Reference: SEFGJP(phone number removed) Location: WR4 0AD Pay Rate: 13.90 per hour Contract: 6-Month Rolling Contract Hours: Core hours 7:00am - 3:00pm (flexibility required) Interview Process: One-stage Face-to-Face Interview including a Practical Test About the Role We are seeking an experienced and hands-on Post Process Technician to join a busy manufacturing environment. This role is ideal for candidates who can hit the ground running and have previous experience working with castings, dressing, fettling, blasting, and post-processing operations . The successful candidate will be responsible for finishing and refining components to meet strict quality standards using a range of pneumatic hand tools , including grinders, burr tools, die grinders, sanding discs, and blasting equipment. Candidates with experience working in a casting house, foundry, manufacturing, engineering, or fabrication environment are highly desirable. No formal qualifications are required; however, practical experience and the ability to demonstrate relevant skills are essential. Key Responsibilities Carry out post-processing and finishing operations on cast and manufactured components. Perform dressing, fettling, deburring, grinding, sanding, blasting, and surface finishing activities. Remove excess material, surface imperfections, and defects while maintaining component integrity. Operate pneumatic hand tools safely and effectively, including: Grinders Die grinders Burr tools Sanding discs Blasting equipment Inspect finished components against engineering drawings, specifications, and quality standards. Identify and report defects, non-conformances, or quality concerns. Follow standard operating procedures (SOPs), work instructions, and health & safety guidelines. Maintain a clean, organised, and safe working environment in line with 5S principles. Collaborate with production, quality, and engineering teams to achieve manufacturing targets. Support continuous improvement initiatives to improve efficiency and product quality. Essential Requirements Previous experience in a post-processing, finishing, dressing, fettling, casting, foundry, fabrication, machining, or manufacturing environment . Strong experience using pneumatic hand tools , particularly grinders, die grinders, burr tools, sanders, and sanding discs. Experience working with castings and component dressing. Ability to follow SOPs, data cards, and work instructions. Excellent attention to detail and commitment to quality. Understanding of workplace health and safety procedures. Good manual dexterity and practical problem-solving skills. Ability to work independently and as part of a team. Reliable, adaptable, and capable of working in a fast-paced manufacturing environment. Desirable Requirements Previous experience working within a casting house or foundry environment . Experience with blasting operations. Familiarity with engineering drawings and quality inspection processes. Experience working with metal components or precision-engineered products. Background in aerospace, automotive, defence, heavy engineering, or industrial manufacturing sectors. Key Competencies Ability to hit the ground running High attention to detail Quality-focused mindset Mechanical aptitude Strong safety awareness Teamwork and communication skills Good time management and prioritisation Reliability and flexibility Physical Requirements Ability to stand for extended periods. Comfortable carrying out repetitive manual tasks. Ability to safely handle and manoeuvre components. Willingness to wear appropriate PPE, including hearing, eye, hand, and respiratory protection. What We're Looking For We're looking for a practical and experienced technician with a strong background in casting, dressing, fettling, and post-processing activities . You'll be confident using grinders, sanding equipment, and blasting machinery, with the ability to consistently achieve high-quality results while maintaining excellent safety standards. A practical skills assessment will form part of the interview process, so candidates must be able to demonstrate their hands-on capability and experience. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser (url removed)
Jul 31, 2026
Seasonal
Post Process Technician Reference: SEFGJP(phone number removed) Location: WR4 0AD Pay Rate: 13.90 per hour Contract: 6-Month Rolling Contract Hours: Core hours 7:00am - 3:00pm (flexibility required) Interview Process: One-stage Face-to-Face Interview including a Practical Test About the Role We are seeking an experienced and hands-on Post Process Technician to join a busy manufacturing environment. This role is ideal for candidates who can hit the ground running and have previous experience working with castings, dressing, fettling, blasting, and post-processing operations . The successful candidate will be responsible for finishing and refining components to meet strict quality standards using a range of pneumatic hand tools , including grinders, burr tools, die grinders, sanding discs, and blasting equipment. Candidates with experience working in a casting house, foundry, manufacturing, engineering, or fabrication environment are highly desirable. No formal qualifications are required; however, practical experience and the ability to demonstrate relevant skills are essential. Key Responsibilities Carry out post-processing and finishing operations on cast and manufactured components. Perform dressing, fettling, deburring, grinding, sanding, blasting, and surface finishing activities. Remove excess material, surface imperfections, and defects while maintaining component integrity. Operate pneumatic hand tools safely and effectively, including: Grinders Die grinders Burr tools Sanding discs Blasting equipment Inspect finished components against engineering drawings, specifications, and quality standards. Identify and report defects, non-conformances, or quality concerns. Follow standard operating procedures (SOPs), work instructions, and health & safety guidelines. Maintain a clean, organised, and safe working environment in line with 5S principles. Collaborate with production, quality, and engineering teams to achieve manufacturing targets. Support continuous improvement initiatives to improve efficiency and product quality. Essential Requirements Previous experience in a post-processing, finishing, dressing, fettling, casting, foundry, fabrication, machining, or manufacturing environment . Strong experience using pneumatic hand tools , particularly grinders, die grinders, burr tools, sanders, and sanding discs. Experience working with castings and component dressing. Ability to follow SOPs, data cards, and work instructions. Excellent attention to detail and commitment to quality. Understanding of workplace health and safety procedures. Good manual dexterity and practical problem-solving skills. Ability to work independently and as part of a team. Reliable, adaptable, and capable of working in a fast-paced manufacturing environment. Desirable Requirements Previous experience working within a casting house or foundry environment . Experience with blasting operations. Familiarity with engineering drawings and quality inspection processes. Experience working with metal components or precision-engineered products. Background in aerospace, automotive, defence, heavy engineering, or industrial manufacturing sectors. Key Competencies Ability to hit the ground running High attention to detail Quality-focused mindset Mechanical aptitude Strong safety awareness Teamwork and communication skills Good time management and prioritisation Reliability and flexibility Physical Requirements Ability to stand for extended periods. Comfortable carrying out repetitive manual tasks. Ability to safely handle and manoeuvre components. Willingness to wear appropriate PPE, including hearing, eye, hand, and respiratory protection. What We're Looking For We're looking for a practical and experienced technician with a strong background in casting, dressing, fettling, and post-processing activities . You'll be confident using grinders, sanding equipment, and blasting machinery, with the ability to consistently achieve high-quality results while maintaining excellent safety standards. A practical skills assessment will form part of the interview process, so candidates must be able to demonstrate their hands-on capability and experience. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser (url removed)
