We are seeking an experienced Electronics Technician to join our clients multidisciplinary design and development team on a permanent basis in Edinburgh. This is a hands-on role working in a creative, fast-paced R&D environment rather than a production setting. You will support the design, development, testing, and modification of electronic systems across multiple projects. You must have the following skills and experience: You must be skilled at under-the-microscope soldering, PCB build, repair and updates, cable harness builds and general product builds. Hand assemble, populate, modify, and rework PCBs, including fine-pitch surface-mount components and BGA packages. Perform manual PCB modifications, including circuit changes, cut-and-strap rework, and construction of prototype circuits. Build, modify, and repair small batches of prototype PCBs, cables, devices, and test fixtures. Test and fault-find electronic circuits, documenting results using standard laboratory test equipment. Design, build, and safely commission the electrical and electronic aspects of test rigs, demonstrators, and exhibition models, ranging from small desktop devices to full-scale mock-ups. What you'll do: Work in a design and development (R&D) environment, collaborating closely with engineers, designers, and project teams. Manage multiple projects and priorities simultaneously, responding to varied requests throughout the day. Interpret high-level briefs and proactively seek additional technical information where required. Hand assemble, populate, modify, and rework PCBs, including fine-pitch surface-mount components and BGA packages. Perform manual PCB modifications, including circuit changes, cut-and-strap rework, and construction of prototype circuits. Build, modify, and repair small batches of prototype PCBs, cables, devices, and test fixtures. Maintain accurate build records, including PCB modification histories and assembly states. Test and fault-find electronic circuits, documenting results using standard laboratory test equipment. Design, build, and safely commission the electrical and electronic aspects of test rigs, demonstrators, and exhibition models, ranging from small desktop devices to full-scale mock-ups. Support the day-to-day operation of the electronics laboratory. Implement and maintain lab working processes, procedures, and compliance to applicable standards (eg, ESD, COSHH, Health and Safety, etc.). Ensure lab equipment is maintained in working order and calibrated as necessary. Maintain an inventory of lab equipment and supplies, ensuring everything is properly accounted for and reordered as necessary. This role will allow the right candidate to grow and develop their skills in a supportive environment.
Apr 02, 2026
Full time
We are seeking an experienced Electronics Technician to join our clients multidisciplinary design and development team on a permanent basis in Edinburgh. This is a hands-on role working in a creative, fast-paced R&D environment rather than a production setting. You will support the design, development, testing, and modification of electronic systems across multiple projects. You must have the following skills and experience: You must be skilled at under-the-microscope soldering, PCB build, repair and updates, cable harness builds and general product builds. Hand assemble, populate, modify, and rework PCBs, including fine-pitch surface-mount components and BGA packages. Perform manual PCB modifications, including circuit changes, cut-and-strap rework, and construction of prototype circuits. Build, modify, and repair small batches of prototype PCBs, cables, devices, and test fixtures. Test and fault-find electronic circuits, documenting results using standard laboratory test equipment. Design, build, and safely commission the electrical and electronic aspects of test rigs, demonstrators, and exhibition models, ranging from small desktop devices to full-scale mock-ups. What you'll do: Work in a design and development (R&D) environment, collaborating closely with engineers, designers, and project teams. Manage multiple projects and priorities simultaneously, responding to varied requests throughout the day. Interpret high-level briefs and proactively seek additional technical information where required. Hand assemble, populate, modify, and rework PCBs, including fine-pitch surface-mount components and BGA packages. Perform manual PCB modifications, including circuit changes, cut-and-strap rework, and construction of prototype circuits. Build, modify, and repair small batches of prototype PCBs, cables, devices, and test fixtures. Maintain accurate build records, including PCB modification histories and assembly states. Test and fault-find electronic circuits, documenting results using standard laboratory test equipment. Design, build, and safely commission the electrical and electronic aspects of test rigs, demonstrators, and exhibition models, ranging from small desktop devices to full-scale mock-ups. Support the day-to-day operation of the electronics laboratory. Implement and maintain lab working processes, procedures, and compliance to applicable standards (eg, ESD, COSHH, Health and Safety, etc.). Ensure lab equipment is maintained in working order and calibrated as necessary. Maintain an inventory of lab equipment and supplies, ensuring everything is properly accounted for and reordered as necessary. This role will allow the right candidate to grow and develop their skills in a supportive environment.
An Electronics Engineer with experience in production, manufacturing or electronics design support will join the exciting new production engineering team of an award-winning Technology Company. You'll be comfortable working across R&D and manufacturing environments, bringing a good understanding of PCB assembly, production test methods, quality standards as well as hands-on troubleshooting skills. Competitive salary package on offer. Office based role. The successful Electronics Engineer will undertake a range of tasks across NPI, production test and engineering development, electronic manufacturing process development, manufacturing optimization, production support and engineering control. An analytical mindset and adaptability are key personal attributes sought. Your skills & Experience should include: An Electronics / Electrical Engineering related Degree or equivalent experience. Experience working within an electronics production / manufacturing engineering role or similar. Proven knowledge of PCB assembly, electronics integration and production test methods. Familiarity with quality standards. Troubleshooting electronic circuits, assemblies and system level faults. It would also be beneficial to bring experience of DFM, DFT, Lean Manufacturing and supporting NPI from prototype builds through to volume manufacture. This challenging and rewarding Electronics Engineer role is an opportunity to contribute to the shaping of a new production engineering team, bridging cutting edge R&D and real-world manufacturing, with opportunities for career development growth. You must have full eligibility to work in the Uk without restrictions. This role is fully on-site. Details of the competitive remuneration package upon application.
Apr 02, 2026
Full time
An Electronics Engineer with experience in production, manufacturing or electronics design support will join the exciting new production engineering team of an award-winning Technology Company. You'll be comfortable working across R&D and manufacturing environments, bringing a good understanding of PCB assembly, production test methods, quality standards as well as hands-on troubleshooting skills. Competitive salary package on offer. Office based role. The successful Electronics Engineer will undertake a range of tasks across NPI, production test and engineering development, electronic manufacturing process development, manufacturing optimization, production support and engineering control. An analytical mindset and adaptability are key personal attributes sought. Your skills & Experience should include: An Electronics / Electrical Engineering related Degree or equivalent experience. Experience working within an electronics production / manufacturing engineering role or similar. Proven knowledge of PCB assembly, electronics integration and production test methods. Familiarity with quality standards. Troubleshooting electronic circuits, assemblies and system level faults. It would also be beneficial to bring experience of DFM, DFT, Lean Manufacturing and supporting NPI from prototype builds through to volume manufacture. This challenging and rewarding Electronics Engineer role is an opportunity to contribute to the shaping of a new production engineering team, bridging cutting edge R&D and real-world manufacturing, with opportunities for career development growth. You must have full eligibility to work in the Uk without restrictions. This role is fully on-site. Details of the competitive remuneration package upon application.
Our Edinburgh based client are seeking a talented and driven Mechanical Design Engineer to join their hardware development team. This role is ideal for someone with a solid foundation in mechanical design and product development, who is ready to take ownership of projects and contribute to the design and manufacturing of innovative hardware solutions. * Proficiency in Creo CAD Software is required to be successful in this role. My client offers a 4 day, hybrid working week with core office days being Tuesdays, Wednesdays and Thursdays. What you'll do Design and develop mechanical components and assemblies for hardware products, from concept through production within budget and timescales. Create detailed 3D CAD models and 2D drawings using Creo (SolidWorks and Fusion 360 would be an additional bonus). Perform tolerance analysis, material selection, and design for manufacturability (DFM). Collaborate cross-functionally with electrical engineers, industrial designers, and manufacturing teams. Conduct prototyping, testing, and validation of mechanical designs. Support the transition of designs from prototype to mass production, including supplier engagement and quality assurance. Analyse mechanical failures and implement corrective actions. Maintain documentation and version control of design files and specifications. We're looking for someone who has Product depth - combining hardware/electronics/optics and standalone product delivery. Proven success in mechanical design, preferably in a commercial hardware development environment. Proficiency in CAD software (eg, SolidWorks, Creo, Fusion 360). Experience with prototyping techniques (eg, 3D printing, CNC machining). Familiarity with thermal, structural, and vibration analysis. Experience of manufacturing processes such as injection moulding, sheet metal fabrication, and die casting. Desirable Experience with simulation tools. Knowledge of electronics packaging and integration. Experience with PLM. Exposure to regulatory standards and compliance (eg, CE, UL). Experience working in Agile or fast-paced product development cycles. Ability to work to tight deadlines and able to deal with multiple issues simultaneously. Conscientious and hardworking individual willing to take responsibility for ensuring activities are completed in the required time frame. Delivery focused, with a proven track record in working in similar planning environments.
Apr 02, 2026
Full time
Our Edinburgh based client are seeking a talented and driven Mechanical Design Engineer to join their hardware development team. This role is ideal for someone with a solid foundation in mechanical design and product development, who is ready to take ownership of projects and contribute to the design and manufacturing of innovative hardware solutions. * Proficiency in Creo CAD Software is required to be successful in this role. My client offers a 4 day, hybrid working week with core office days being Tuesdays, Wednesdays and Thursdays. What you'll do Design and develop mechanical components and assemblies for hardware products, from concept through production within budget and timescales. Create detailed 3D CAD models and 2D drawings using Creo (SolidWorks and Fusion 360 would be an additional bonus). Perform tolerance analysis, material selection, and design for manufacturability (DFM). Collaborate cross-functionally with electrical engineers, industrial designers, and manufacturing teams. Conduct prototyping, testing, and validation of mechanical designs. Support the transition of designs from prototype to mass production, including supplier engagement and quality assurance. Analyse mechanical failures and implement corrective actions. Maintain documentation and version control of design files and specifications. We're looking for someone who has Product depth - combining hardware/electronics/optics and standalone product delivery. Proven success in mechanical design, preferably in a commercial hardware development environment. Proficiency in CAD software (eg, SolidWorks, Creo, Fusion 360). Experience with prototyping techniques (eg, 3D printing, CNC machining). Familiarity with thermal, structural, and vibration analysis. Experience of manufacturing processes such as injection moulding, sheet metal fabrication, and die casting. Desirable Experience with simulation tools. Knowledge of electronics packaging and integration. Experience with PLM. Exposure to regulatory standards and compliance (eg, CE, UL). Experience working in Agile or fast-paced product development cycles. Ability to work to tight deadlines and able to deal with multiple issues simultaneously. Conscientious and hardworking individual willing to take responsibility for ensuring activities are completed in the required time frame. Delivery focused, with a proven track record in working in similar planning environments.
Electrical Maintenance Engineer Location: North Oxfordshire Salary: £37,000 £44,000 per annum Hours: Days initially, moving to rotating AM / PM shifts (no nights) Our client is a well-established global manufacturing organisation operating across multiple international sites. They are a recognised leader within their sector and are looking to add an Electrical Maintenance Engineer to support their growing UK operation. This role offers long-term stability, exposure to modern manufacturing and automation equipment, and the opportunity to work within a safety-focused, high-volume production environment. Responsibilities Electrical Maintenance Engineer Respond to day-to-day electrical and mechanical maintenance issues and machinery breakdowns Diagnose, fault-find, and repair production machinery, robotics, automated systems, and plant equipment Carry out preventative maintenance with a focus on electrical systems, control panels, drives, and motors Support PLCs, sensors, and other control systems to maintain production uptime Work closely with production teams to maximise equipment efficiency and reliability Maintain accurate maintenance records and electrical documentation Liaise with external contractors and suppliers for specialist electrical support Manage electrical spare parts, consumables, and stock levels Support continuous improvement initiatives to reduce downtime and improve system reliability Ensure statutory inspections, testing, and electrical compliance requirements are met Assist with planning maintenance coverage across machinery, automation systems, and ancillary equipment Qualifications / Experience Electrical Maintenance Engineer Time-served engineer with hands-on experience in a manufacturing environment Strong electrical background with proven fault-finding and problem-solving skills Experience with PLCs, control panels, motors, drives, or robotics highly desirable Mechanical experience advantageous but not essential Electrical or Mechanical engineering qualification preferred Good understanding of Health & Safety and safe systems of work Organised, proactive, and able to work under pressure Confident communicator able to engage at all levels of the business Benefits Electrical Maintenance Engineer Competitive salary £37,000 £44,000 Company pension scheme Life assurance Additional leave entitlement On-site facilities and free parking Cycle to work scheme Employee discount schemes Training and development opportunities For further details, please contact Kieren Provis on (url removed) We are an employment agency specialising in opportunities within the Engineering, Manufacturing, Automotive, Electronics, Defence, and Scientific sectors. Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Apr 01, 2026
Full time
Electrical Maintenance Engineer Location: North Oxfordshire Salary: £37,000 £44,000 per annum Hours: Days initially, moving to rotating AM / PM shifts (no nights) Our client is a well-established global manufacturing organisation operating across multiple international sites. They are a recognised leader within their sector and are looking to add an Electrical Maintenance Engineer to support their growing UK operation. This role offers long-term stability, exposure to modern manufacturing and automation equipment, and the opportunity to work within a safety-focused, high-volume production environment. Responsibilities Electrical Maintenance Engineer Respond to day-to-day electrical and mechanical maintenance issues and machinery breakdowns Diagnose, fault-find, and repair production machinery, robotics, automated systems, and plant equipment Carry out preventative maintenance with a focus on electrical systems, control panels, drives, and motors Support PLCs, sensors, and other control systems to maintain production uptime Work closely with production teams to maximise equipment efficiency and reliability Maintain accurate maintenance records and electrical documentation Liaise with external contractors and suppliers for specialist electrical support Manage electrical spare parts, consumables, and stock levels Support continuous improvement initiatives to reduce downtime and improve system reliability Ensure statutory inspections, testing, and electrical compliance requirements are met Assist with planning maintenance coverage across machinery, automation systems, and ancillary equipment Qualifications / Experience Electrical Maintenance Engineer Time-served engineer with hands-on experience in a manufacturing environment Strong electrical background with proven fault-finding and problem-solving skills Experience with PLCs, control panels, motors, drives, or robotics highly desirable Mechanical experience advantageous but not essential Electrical or Mechanical engineering qualification preferred Good understanding of Health & Safety and safe systems of work Organised, proactive, and able to work under pressure Confident communicator able to engage at all levels of the business Benefits Electrical Maintenance Engineer Competitive salary £37,000 £44,000 Company pension scheme Life assurance Additional leave entitlement On-site facilities and free parking Cycle to work scheme Employee discount schemes Training and development opportunities For further details, please contact Kieren Provis on (url removed) We are an employment agency specialising in opportunities within the Engineering, Manufacturing, Automotive, Electronics, Defence, and Scientific sectors. Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Job Title: Electrical Instrumentation Engineer Location: Barrow-in-Furness - Onsite We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: £37091+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role Description: You'll liaise with internal customers, as required, to foster collaborative working relationships and ensure requirements are adequately articulated, understood and met You'll be installing a variety of different instrumentation around site that captures our customer's needs You'll be fault finding and repairing of legacy equipment You'll be working with BAE Systems' supply chain department and equipment suppliers to deliver equipment that meets customer requirements Where appropriate, you'll support factory acceptance trial attendance and submarine system trials and analyse trial results when required You'll undertake peer reviews or checking/verification tasks as directed You'll provide support to the Certificate of Design activities You'll support the production of evidence in support of qualification, legislative requirements and safety justifications and provide specialist support for associated activities Essential Skills: HNC (or relevant experience) with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures. Excellent problem solving and analytical skills (knowledge of MATLAB or LabVIEW would be a bonus) The Instrumentation Development Services (IDS) team As an Electrical Instrumentation Engineer, you will provide support to the senior and principal engineers and/or external specialists during development of testing regimes and verification activities for electronic systems. You will be involved in analysis and production of technical reports supporting system verification. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. Onsite
Apr 01, 2026
Full time
Job Title: Electrical Instrumentation Engineer Location: Barrow-in-Furness - Onsite We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: £37091+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role Description: You'll liaise with internal customers, as required, to foster collaborative working relationships and ensure requirements are adequately articulated, understood and met You'll be installing a variety of different instrumentation around site that captures our customer's needs You'll be fault finding and repairing of legacy equipment You'll be working with BAE Systems' supply chain department and equipment suppliers to deliver equipment that meets customer requirements Where appropriate, you'll support factory acceptance trial attendance and submarine system trials and analyse trial results when required You'll undertake peer reviews or checking/verification tasks as directed You'll provide support to the Certificate of Design activities You'll support the production of evidence in support of qualification, legislative requirements and safety justifications and provide specialist support for associated activities Essential Skills: HNC (or relevant experience) with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures. Excellent problem solving and analytical skills (knowledge of MATLAB or LabVIEW would be a bonus) The Instrumentation Development Services (IDS) team As an Electrical Instrumentation Engineer, you will provide support to the senior and principal engineers and/or external specialists during development of testing regimes and verification activities for electronic systems. You will be involved in analysis and production of technical reports supporting system verification. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. Onsite
Bristol Our Test & Evaluation team are looking for a V&V Systems Engineering Specialist to operate with a high-level of technical responsibility for the entire lifecycle of our product, ranging from design and development to qualification and deployment Salary: Up to £ 65k depending on experience Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: Our Test & Evaluation team are looking for a V&V Systems Engineering Specialist to operate with a high-level of technical responsibility for the entire lifecycle of our product, ranging from design and development to qualification and deployment. A specialist will bridge the gap between design and production, ensuring that complex, high-reliability systems meet our requirements. Key Responsibilities Test Strategy & Development: Defining test requirements, creating test plans, scoping front end activities with the customer ensuring that requirements are met and understood with the best efficiency maintained for deliveries. System Validation: Overseeing or supporting the qualification and acceptance of test equipment, ensuring it is robust, compliant, and accurate. Analysis & Troubleshooting: Analysing test data, identifying performance bottlenecks, and troubleshooting validation issues. Documentation & Governance: Producing technical documentation (test procedures, reports) and ensuring compliance with safety and regulatory standards. Support departmental strategy and support the department head with recruitment of the right people into the team. Proven ability to influence senior stakeholders within the business relating to technical direction Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification. Supporting new product bid activities. Identify, document and deploy best practice across the department and within projects. What we're looking for from you: Essential Skills & Qualifications Technical Knowledge: Strong understanding of electronics or mechanical systems, a degree in Electrical Engineering or a similar discipline. Hands-on Experience: Expertise in operating general-purpose test equipment (e.g., oscilloscopes, spectrum analysers, signal generators). Industry Standards: Knowledge of safety-critical standards, particularly within aerospace, defence (e.g., MOD), or rail sectors. Communication: Ability to work within multi-disciplinary teams and liaise with customers for system acceptance. Hands-on experience of DOORS & DOORS NG, SysML & Rhapsody would be desirable, but training will be provided where needed. Experience in DfT and testability. RF / Microwave systems knowledge would be desirable. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Apr 01, 2026
Full time
Bristol Our Test & Evaluation team are looking for a V&V Systems Engineering Specialist to operate with a high-level of technical responsibility for the entire lifecycle of our product, ranging from design and development to qualification and deployment Salary: Up to £ 65k depending on experience Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: Our Test & Evaluation team are looking for a V&V Systems Engineering Specialist to operate with a high-level of technical responsibility for the entire lifecycle of our product, ranging from design and development to qualification and deployment. A specialist will bridge the gap between design and production, ensuring that complex, high-reliability systems meet our requirements. Key Responsibilities Test Strategy & Development: Defining test requirements, creating test plans, scoping front end activities with the customer ensuring that requirements are met and understood with the best efficiency maintained for deliveries. System Validation: Overseeing or supporting the qualification and acceptance of test equipment, ensuring it is robust, compliant, and accurate. Analysis & Troubleshooting: Analysing test data, identifying performance bottlenecks, and troubleshooting validation issues. Documentation & Governance: Producing technical documentation (test procedures, reports) and ensuring compliance with safety and regulatory standards. Support departmental strategy and support the department head with recruitment of the right people into the team. Proven ability to influence senior stakeholders within the business relating to technical direction Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification. Supporting new product bid activities. Identify, document and deploy best practice across the department and within projects. What we're looking for from you: Essential Skills & Qualifications Technical Knowledge: Strong understanding of electronics or mechanical systems, a degree in Electrical Engineering or a similar discipline. Hands-on Experience: Expertise in operating general-purpose test equipment (e.g., oscilloscopes, spectrum analysers, signal generators). Industry Standards: Knowledge of safety-critical standards, particularly within aerospace, defence (e.g., MOD), or rail sectors. Communication: Ability to work within multi-disciplinary teams and liaise with customers for system acceptance. Hands-on experience of DOORS & DOORS NG, SysML & Rhapsody would be desirable, but training will be provided where needed. Experience in DfT and testability. RF / Microwave systems knowledge would be desirable. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Transducer Test Engineer Competitive Package + Benefits Blackbushe, UK On-site Permanent We are looking for a detail-oriented Transducer Test Engineer to join a highly innovative engineering organisation specialising in underwater acoustics and subsea technology. This is an exciting opportunity to work at the forefront of advanced sensing systems, supporting cutting-edge products used globally across offshore energy, defence, and oceanographic research. The business is a well-established leader in subsea positioning, navigation, and communication systems, with decades of expertise in delivering high-performance acoustic solutions. Due to continued growth, they are expanding their engineering team. The company develops advanced underwater acoustic technologies that enable precise navigation, data transmission, and environmental measurement in challenging subsea environments. Their solutions are critical to offshore operations, autonomous vehicles, and scientific exploration. We are looking for someone who enjoys working in an engineering-focused environment. You may already be an experienced Test Engineer or looking to develop further in your career. You will need to have practical experience with testing, data analysis, or lab-based engineering. Key Responsibilities: Developing and executing test plans, ensuring high-quality delivery of results Performing in-air and in-water acoustic and electrical testing Analysing data and producing detailed reports including root cause analysis Supporting development and continuous improvement of acoustic products and systems Defining and improving testing processes and methodologies Collaborating with engineering and production teams Assisting in the development and evaluation of new transducer designs Ensuring compliance with industry standards and best practices Key Skills Experience in engineering testing, data analysis, or similar technical roles Strong problem-solving skills and attention to detail Good communication skills and ability to present technical findings Understanding of acoustics, electronics, or related fields Degree in Physics, Engineering, Mathematics or similar Desirable skills: Experience with underwater acoustics or transducers Familiarity with lab equipment and measurement systems Experience with prototype development or calibration systems Knowledge of engineering or manufacturing environments What you get in return: Competitive benefits package Opportunity to work on cutting-edge deep tech systems Clear progression opportunities This company is an equal opportunity employer and value diversity. They do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Interested? Please submit your CV via the link provided. Alternatively email me on INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
Apr 01, 2026
Full time
Transducer Test Engineer Competitive Package + Benefits Blackbushe, UK On-site Permanent We are looking for a detail-oriented Transducer Test Engineer to join a highly innovative engineering organisation specialising in underwater acoustics and subsea technology. This is an exciting opportunity to work at the forefront of advanced sensing systems, supporting cutting-edge products used globally across offshore energy, defence, and oceanographic research. The business is a well-established leader in subsea positioning, navigation, and communication systems, with decades of expertise in delivering high-performance acoustic solutions. Due to continued growth, they are expanding their engineering team. The company develops advanced underwater acoustic technologies that enable precise navigation, data transmission, and environmental measurement in challenging subsea environments. Their solutions are critical to offshore operations, autonomous vehicles, and scientific exploration. We are looking for someone who enjoys working in an engineering-focused environment. You may already be an experienced Test Engineer or looking to develop further in your career. You will need to have practical experience with testing, data analysis, or lab-based engineering. Key Responsibilities: Developing and executing test plans, ensuring high-quality delivery of results Performing in-air and in-water acoustic and electrical testing Analysing data and producing detailed reports including root cause analysis Supporting development and continuous improvement of acoustic products and systems Defining and improving testing processes and methodologies Collaborating with engineering and production teams Assisting in the development and evaluation of new transducer designs Ensuring compliance with industry standards and best practices Key Skills Experience in engineering testing, data analysis, or similar technical roles Strong problem-solving skills and attention to detail Good communication skills and ability to present technical findings Understanding of acoustics, electronics, or related fields Degree in Physics, Engineering, Mathematics or similar Desirable skills: Experience with underwater acoustics or transducers Familiarity with lab equipment and measurement systems Experience with prototype development or calibration systems Knowledge of engineering or manufacturing environments What you get in return: Competitive benefits package Opportunity to work on cutting-edge deep tech systems Clear progression opportunities This company is an equal opportunity employer and value diversity. They do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Interested? Please submit your CV via the link provided. Alternatively email me on INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
What You'll Do Perform soldering, crimping, and mechanical/cable assemblies in accordance with IPC-A-610 standards Deliver training to teams on production methods and best practices Take a forward-thinking approach, identifying skill gaps required for new projects/products Read and interpret detailed engineering drawings; provide feedback to align with production standards Work in accordance with Job Cards, drawings, test plans, technical instructions, and process documents Inspect component parts and identify defects during manufacturing and assembly Create detailed Standard Operating Procedures (SOPs) Inspect components and sub-assemblies to quality standards, tolerances, and specifications Kit parts, tools, and equipment to ensure correct and compliant assembly Act as a key liaison between Engineering and Production to ensure smooth product transfer Ensure wiring looms meet required dimensional and visual standards Identify opportunities for process improvement and communicate effectively Participate in continuous improvement initiatives to reduce waste and operating costs Maintain a safe, clean, and compliant working environment (H&S) Support additional operational tasks as required Deliver high-quality work within agreed deadlines Record and report defects accurately Adhere to all company policies and procedures What You'll Need Ability to obtain UK security clearance Minimum 5 years' experience in a technical production role Advanced experience in manufacturing, assembly, repair, or modification of electronic systems Strong mechanical aptitude Proficiency with hand tools and test equipment Ability to read and interpret electronic and mechanical drawings Knowledge of electronic components Experience creating detailed documentation from specifications and drawings Basic understanding of electrical and electronic principles Strong communication and stakeholder engagement skills Competence in IPC 610 and IPC 620 standards Strong multitasking ability Proficiency in Microsoft Office 365 and ability to learn new software quickly Self-motivated with the ability to work independently Enthusiastic and eager to learn, develop, and progress What You'll Get Full engineering life cycle exposure with flexible career pathways Paid overtime or time off in lieu (up to 24 additional days per year) Flexible working hours (core hours: 09:30-12:00 and 14:00-16:00) Role-specific allowances (dependent on projects) Holiday entitlement: 24 days + public holidays (pro rata) Pension scheme: 14% total (7% employer + 7% employee) Private medical care (50+ clinics nationwide) Ongoing training and professional development opportunities Cycle-to-work scheme and monthly savings plans Company tech scheme (salary loans for equipment) Relocation package (subject to eligibility and HMRC guidelines)
Apr 01, 2026
Full time
What You'll Do Perform soldering, crimping, and mechanical/cable assemblies in accordance with IPC-A-610 standards Deliver training to teams on production methods and best practices Take a forward-thinking approach, identifying skill gaps required for new projects/products Read and interpret detailed engineering drawings; provide feedback to align with production standards Work in accordance with Job Cards, drawings, test plans, technical instructions, and process documents Inspect component parts and identify defects during manufacturing and assembly Create detailed Standard Operating Procedures (SOPs) Inspect components and sub-assemblies to quality standards, tolerances, and specifications Kit parts, tools, and equipment to ensure correct and compliant assembly Act as a key liaison between Engineering and Production to ensure smooth product transfer Ensure wiring looms meet required dimensional and visual standards Identify opportunities for process improvement and communicate effectively Participate in continuous improvement initiatives to reduce waste and operating costs Maintain a safe, clean, and compliant working environment (H&S) Support additional operational tasks as required Deliver high-quality work within agreed deadlines Record and report defects accurately Adhere to all company policies and procedures What You'll Need Ability to obtain UK security clearance Minimum 5 years' experience in a technical production role Advanced experience in manufacturing, assembly, repair, or modification of electronic systems Strong mechanical aptitude Proficiency with hand tools and test equipment Ability to read and interpret electronic and mechanical drawings Knowledge of electronic components Experience creating detailed documentation from specifications and drawings Basic understanding of electrical and electronic principles Strong communication and stakeholder engagement skills Competence in IPC 610 and IPC 620 standards Strong multitasking ability Proficiency in Microsoft Office 365 and ability to learn new software quickly Self-motivated with the ability to work independently Enthusiastic and eager to learn, develop, and progress What You'll Get Full engineering life cycle exposure with flexible career pathways Paid overtime or time off in lieu (up to 24 additional days per year) Flexible working hours (core hours: 09:30-12:00 and 14:00-16:00) Role-specific allowances (dependent on projects) Holiday entitlement: 24 days + public holidays (pro rata) Pension scheme: 14% total (7% employer + 7% employee) Private medical care (50+ clinics nationwide) Ongoing training and professional development opportunities Cycle-to-work scheme and monthly savings plans Company tech scheme (salary loans for equipment) Relocation package (subject to eligibility and HMRC guidelines)
Product Support/Development Technician Required Dartford Our client is a trusted, multi-award-winning global market leader developing innovative vehicle safety systems, for commercial vehicles and mobile machinery. Their cutting-edge solutions prevent collisions and save lives. Purpose of Role The primary function of this role will be to support the Engineering teams in the research, development and testing of new products and technologies, applying strong knowledge of electronics, interfaces and communications protocols, with automotive and quality awareness. The ideal candidate will have the capability not only to understand testing and evaluation requirements, but to think outside the box, to envisage likely scenarios and devise simple but effective test methods to verify product performance under various conditions. The candidate will employ good practices in terms of equipment setup & installations within the workshop and at external test locations, and will possess good fault-finding skills, accompanied by a basic understanding of vehicle electrical systems. Whilst the position is mainly office-based, site visits at locations throughout the UK, and driving of company vehicles will be required to carry out testing and evaluation. Liaison with global suppliers will be necessary from time to time. Purpose of Role The primary function of this role will be to support the Engineering teams in the research, development and testing of new products and technologies, applying strong knowledge of electronics, interfaces and communications protocols, with automotive and quality awareness. The ideal candidate will have the capability not only to understand testing and evaluation requirements, but to think outside the box, to envisage likely scenarios and devise simple but effective test methods to verify product performance under various conditions. The candidate will employ good practices in terms of equipment setup & installations within the workshop and at external test locations, and will possess good fault-finding skills, accompanied by a basic understanding of vehicle electrical systems. Whilst the position is mainly office-based, site visits at locations throughout the UK, and driving of company vehicles will be required to carry out testing and evaluation. Liaison with Brigade's global suppliers will be necessary from time to time. Key Responsibilities Carry out technical product and system testing, evaluation, verification and validation. Devise, trial and implement improved test setups, procedures and working methods, to enhance evaluation efficiency and accuracy. Support or lead product and documentation changes and updates. Key Tasks Bench marking, testing, evaluation, tear down, troubleshooting, analysis and reporting of new and existing vehicle safety products and technologies. Support the execution of trials on Brigade and customer vehicles. Electrical and mechanical modification, construction of prototypes and rework of production. Participation in project team meetings and other Engineering activities. Technical support and training both via telephone / email or off-site for customers and colleagues. Person Specification . Experience in working hands-on with electronics, preferably in the automotive industry, resulting in a good understanding of analogue and digital circuits, components, communications & data signals, 12/24V automotive technology and with an appreciation of embedded software Competent in the setup and use of electronic test equipment, DMMs, oscilloscopes, signal generators and others with circuit level fault finding and diagnosis skills in modern electronics circuitry. SMD and PTH component soldering skills. Familiar with Microsoft 365 suite and standard desktop applications Self-motivated with a practical aptitude and methodical, detail-orientated approach, taking full responsibility for the quality of own work. Able to work to deadlines with the flexibility to multi-task and to work beyond normal business hours when required. Resourceful and eager to learn with a natural respect for company and colleagues. Strong verbal and written communication skills are essential. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Apr 01, 2026
Full time
Product Support/Development Technician Required Dartford Our client is a trusted, multi-award-winning global market leader developing innovative vehicle safety systems, for commercial vehicles and mobile machinery. Their cutting-edge solutions prevent collisions and save lives. Purpose of Role The primary function of this role will be to support the Engineering teams in the research, development and testing of new products and technologies, applying strong knowledge of electronics, interfaces and communications protocols, with automotive and quality awareness. The ideal candidate will have the capability not only to understand testing and evaluation requirements, but to think outside the box, to envisage likely scenarios and devise simple but effective test methods to verify product performance under various conditions. The candidate will employ good practices in terms of equipment setup & installations within the workshop and at external test locations, and will possess good fault-finding skills, accompanied by a basic understanding of vehicle electrical systems. Whilst the position is mainly office-based, site visits at locations throughout the UK, and driving of company vehicles will be required to carry out testing and evaluation. Liaison with global suppliers will be necessary from time to time. Purpose of Role The primary function of this role will be to support the Engineering teams in the research, development and testing of new products and technologies, applying strong knowledge of electronics, interfaces and communications protocols, with automotive and quality awareness. The ideal candidate will have the capability not only to understand testing and evaluation requirements, but to think outside the box, to envisage likely scenarios and devise simple but effective test methods to verify product performance under various conditions. The candidate will employ good practices in terms of equipment setup & installations within the workshop and at external test locations, and will possess good fault-finding skills, accompanied by a basic understanding of vehicle electrical systems. Whilst the position is mainly office-based, site visits at locations throughout the UK, and driving of company vehicles will be required to carry out testing and evaluation. Liaison with Brigade's global suppliers will be necessary from time to time. Key Responsibilities Carry out technical product and system testing, evaluation, verification and validation. Devise, trial and implement improved test setups, procedures and working methods, to enhance evaluation efficiency and accuracy. Support or lead product and documentation changes and updates. Key Tasks Bench marking, testing, evaluation, tear down, troubleshooting, analysis and reporting of new and existing vehicle safety products and technologies. Support the execution of trials on Brigade and customer vehicles. Electrical and mechanical modification, construction of prototypes and rework of production. Participation in project team meetings and other Engineering activities. Technical support and training both via telephone / email or off-site for customers and colleagues. Person Specification . Experience in working hands-on with electronics, preferably in the automotive industry, resulting in a good understanding of analogue and digital circuits, components, communications & data signals, 12/24V automotive technology and with an appreciation of embedded software Competent in the setup and use of electronic test equipment, DMMs, oscilloscopes, signal generators and others with circuit level fault finding and diagnosis skills in modern electronics circuitry. SMD and PTH component soldering skills. Familiar with Microsoft 365 suite and standard desktop applications Self-motivated with a practical aptitude and methodical, detail-orientated approach, taking full responsibility for the quality of own work. Able to work to deadlines with the flexibility to multi-task and to work beyond normal business hours when required. Resourceful and eager to learn with a natural respect for company and colleagues. Strong verbal and written communication skills are essential. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
We are recruiting for a RF Designer on contract for our client who is in the Defence industry. The role is based in their Stevenage office. The successful candidate will be the designer for specific RF electronics designs. Interfaces to various stakeholders, such as the Datalink Design Authority and other functional entities will need to be managed effectively to ensure the designs are delivered in a timely manner and will integrate to the other parts of the system Responsibilities: The role is substantially technical and hand on testing and proving is essential. Collaborative working with other functions of the business, in particular Software & Firmware Engineering, Mechanical Engineering, Production and Future Systems. Skillset/experience required: Individuals will be able to demonstrate a significant number of the following attributes: Proven relevant RF electronics design experience (likely to be the design of 3 or 4 complex RF electronic items using the latest technologies), preferably for harsh environments (EMC, Vibration, thermal). Can guide the design implementation of RF Electronics Receiver/Transmit amplifier chains, filters and frequency synthesisers over the 30Mhz to 30GHz range. Software Defined Radios of good advantage. Knowledge and proven best practice design of power supplies and digital interfaces for use in a RF product. Proven ability to manage the development and delivery of RF electronic equipment including associated technologies through all stages of the development process Ideally degree qualified Planning and organisation skills with a record of delivering to time and cost This is an umbrella contract, the role is Inside IR35
Apr 01, 2026
Contractor
We are recruiting for a RF Designer on contract for our client who is in the Defence industry. The role is based in their Stevenage office. The successful candidate will be the designer for specific RF electronics designs. Interfaces to various stakeholders, such as the Datalink Design Authority and other functional entities will need to be managed effectively to ensure the designs are delivered in a timely manner and will integrate to the other parts of the system Responsibilities: The role is substantially technical and hand on testing and proving is essential. Collaborative working with other functions of the business, in particular Software & Firmware Engineering, Mechanical Engineering, Production and Future Systems. Skillset/experience required: Individuals will be able to demonstrate a significant number of the following attributes: Proven relevant RF electronics design experience (likely to be the design of 3 or 4 complex RF electronic items using the latest technologies), preferably for harsh environments (EMC, Vibration, thermal). Can guide the design implementation of RF Electronics Receiver/Transmit amplifier chains, filters and frequency synthesisers over the 30Mhz to 30GHz range. Software Defined Radios of good advantage. Knowledge and proven best practice design of power supplies and digital interfaces for use in a RF product. Proven ability to manage the development and delivery of RF electronic equipment including associated technologies through all stages of the development process Ideally degree qualified Planning and organisation skills with a record of delivering to time and cost This is an umbrella contract, the role is Inside IR35
Job Title: Electronics Design Authority Location: Portsmouth Broad Oak, hybrid, 4 days on site weekly We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £61,600 depending on skills & experiences + bonus scheme Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role description: The role involves leading the full lifecycle of electronic assembly development, taking concepts from initial specification through to service release. This includes managing VHDL-based activities such as requirements analysis, coding, simulation, and IP integration, alongside performing rigorous design verification through advanced simulation, analysis, and testing methods. A key part of the work is the ongoing management of existing designs, including technology insertion initiatives and resolving PCB obsolescence challenges, while also generating high quality technical documentation, design reports, and compliance evidence. In addition, the position requires hands on integration and demonstration of complex system level electronics and hardware, ensuring all work adheres to relevant safety legislation, engineering lifecycles, and customer expectations. The role supports peer reviews, design progress assessments, and collaborative engineering across multiple projects, while also contributing to commercial activities such as bids, proposals, and project estimation. Core duties: Lead electronic assembly design and development from concept through to service release and support, providing technical leadership and mentoring junior engineers. Demonstrate expertise in component level electronic design using computer-aided engineering (CAE) tools for volume production, including obsolescence management and technology insertion. Be proficient in circuitry design, digital-to-analogue (ADC/DAC) conversion, power supply decoupling, and collaborating on EMC compliant subsystems and PCB layouts. Apply a rigorous approach to safety and legislative compliance, particularly for high power and high voltage equipment. Substantial experience in design proving, system integration, and proactive defect investigation and resolution. Provide robust technical evidence to support safety, fitness for purpose, and compliance, with strong understanding of FPGA design, power electronics, and advanced test and measurement techniques. You'll hold a degree or equivalent in Electronic Engineering or strongly related subject The Archerfish Team: Join the Archerfish team within the Underwater Battlespace unit, where the Underwater Electronics group drives the full lifecycle of electronics, from design and manufacturing to production and in-service support, covering obsolescence management and redesign for manufacturability. This role focuses on high-integrity electronics development, including VHDL design, coding, analysis, and simulation. The role and team ensure long-term operational success by managing technology insertions and obsolescence while maintaining full compliance with safety legislation and customer requirements. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 10th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Apr 01, 2026
Full time
Job Title: Electronics Design Authority Location: Portsmouth Broad Oak, hybrid, 4 days on site weekly We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £61,600 depending on skills & experiences + bonus scheme Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role description: The role involves leading the full lifecycle of electronic assembly development, taking concepts from initial specification through to service release. This includes managing VHDL-based activities such as requirements analysis, coding, simulation, and IP integration, alongside performing rigorous design verification through advanced simulation, analysis, and testing methods. A key part of the work is the ongoing management of existing designs, including technology insertion initiatives and resolving PCB obsolescence challenges, while also generating high quality technical documentation, design reports, and compliance evidence. In addition, the position requires hands on integration and demonstration of complex system level electronics and hardware, ensuring all work adheres to relevant safety legislation, engineering lifecycles, and customer expectations. The role supports peer reviews, design progress assessments, and collaborative engineering across multiple projects, while also contributing to commercial activities such as bids, proposals, and project estimation. Core duties: Lead electronic assembly design and development from concept through to service release and support, providing technical leadership and mentoring junior engineers. Demonstrate expertise in component level electronic design using computer-aided engineering (CAE) tools for volume production, including obsolescence management and technology insertion. Be proficient in circuitry design, digital-to-analogue (ADC/DAC) conversion, power supply decoupling, and collaborating on EMC compliant subsystems and PCB layouts. Apply a rigorous approach to safety and legislative compliance, particularly for high power and high voltage equipment. Substantial experience in design proving, system integration, and proactive defect investigation and resolution. Provide robust technical evidence to support safety, fitness for purpose, and compliance, with strong understanding of FPGA design, power electronics, and advanced test and measurement techniques. You'll hold a degree or equivalent in Electronic Engineering or strongly related subject The Archerfish Team: Join the Archerfish team within the Underwater Battlespace unit, where the Underwater Electronics group drives the full lifecycle of electronics, from design and manufacturing to production and in-service support, covering obsolescence management and redesign for manufacturability. This role focuses on high-integrity electronics development, including VHDL design, coding, analysis, and simulation. The role and team ensure long-term operational success by managing technology insertions and obsolescence while maintaining full compliance with safety legislation and customer requirements. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 10th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Electronics Design Authority Location: Portsmouth Broad Oak, hybrid, 4 days on site weekly We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £61,600 depending on skills & experiences + bonus scheme Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role description: The role involves leading the full lifecycle of electronic assembly development, taking concepts from initial specification through to service release. This includes managing VHDL-based activities such as requirements analysis, coding, simulation, and IP integration, alongside performing rigorous design verification through advanced simulation, analysis, and testing methods. A key part of the work is the ongoing management of existing designs, including technology insertion initiatives and resolving PCB obsolescence challenges, while also generating high quality technical documentation, design reports, and compliance evidence. In addition, the position requires hands on integration and demonstration of complex system level electronics and hardware, ensuring all work adheres to relevant safety legislation, engineering lifecycles, and customer expectations. The role supports peer reviews, design progress assessments, and collaborative engineering across multiple projects, while also contributing to commercial activities such as bids, proposals, and project estimation. Core duties: Lead electronic assembly design and development from concept through to service release and support, providing technical leadership and mentoring junior engineers. Demonstrate expertise in component level electronic design using computer-aided engineering (CAE) tools for volume production, including obsolescence management and technology insertion. Be proficient in circuitry design, digital-to-analogue (ADC/DAC) conversion, power supply decoupling, and collaborating on EMC compliant subsystems and PCB layouts. Apply a rigorous approach to safety and legislative compliance, particularly for high power and high voltage equipment. Substantial experience in design proving, system integration, and proactive defect investigation and resolution. Provide robust technical evidence to support safety, fitness for purpose, and compliance, with strong understanding of FPGA design, power electronics, and advanced test and measurement techniques. You'll hold a degree or equivalent in Electronic Engineering or strongly related subject The Archerfish Team: Join the Archerfish team within the Underwater Battlespace unit, where the Underwater Electronics group drives the full lifecycle of electronics, from design and manufacturing to production and in-service support, covering obsolescence management and redesign for manufacturability. This role focuses on high-integrity electronics development, including VHDL design, coding, analysis, and simulation. The role and team ensure long-term operational success by managing technology insertions and obsolescence while maintaining full compliance with safety legislation and customer requirements. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 10th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Apr 01, 2026
Full time
Job Title: Electronics Design Authority Location: Portsmouth Broad Oak, hybrid, 4 days on site weekly We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £61,600 depending on skills & experiences + bonus scheme Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role description: The role involves leading the full lifecycle of electronic assembly development, taking concepts from initial specification through to service release. This includes managing VHDL-based activities such as requirements analysis, coding, simulation, and IP integration, alongside performing rigorous design verification through advanced simulation, analysis, and testing methods. A key part of the work is the ongoing management of existing designs, including technology insertion initiatives and resolving PCB obsolescence challenges, while also generating high quality technical documentation, design reports, and compliance evidence. In addition, the position requires hands on integration and demonstration of complex system level electronics and hardware, ensuring all work adheres to relevant safety legislation, engineering lifecycles, and customer expectations. The role supports peer reviews, design progress assessments, and collaborative engineering across multiple projects, while also contributing to commercial activities such as bids, proposals, and project estimation. Core duties: Lead electronic assembly design and development from concept through to service release and support, providing technical leadership and mentoring junior engineers. Demonstrate expertise in component level electronic design using computer-aided engineering (CAE) tools for volume production, including obsolescence management and technology insertion. Be proficient in circuitry design, digital-to-analogue (ADC/DAC) conversion, power supply decoupling, and collaborating on EMC compliant subsystems and PCB layouts. Apply a rigorous approach to safety and legislative compliance, particularly for high power and high voltage equipment. Substantial experience in design proving, system integration, and proactive defect investigation and resolution. Provide robust technical evidence to support safety, fitness for purpose, and compliance, with strong understanding of FPGA design, power electronics, and advanced test and measurement techniques. You'll hold a degree or equivalent in Electronic Engineering or strongly related subject The Archerfish Team: Join the Archerfish team within the Underwater Battlespace unit, where the Underwater Electronics group drives the full lifecycle of electronics, from design and manufacturing to production and in-service support, covering obsolescence management and redesign for manufacturability. This role focuses on high-integrity electronics development, including VHDL design, coding, analysis, and simulation. The role and team ensure long-term operational success by managing technology insertions and obsolescence while maintaining full compliance with safety legislation and customer requirements. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 10th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Electronics Engineer Lewes - £45,000-£47,500 (DOE) An opportunity has arisen for an Electronics Engineer to join a growing engineering business in Lewes, supporting the development of advanced electronic systems used in transport technology. This Electronics Engineer position sits within a well-established R&D team and offers involvement across the full product lifecycle. The Electronics Engineer will take ownership of PCA design for both new and legacy products, working on controllers, TFT displays and associated systems. This Electronics Engineer role requires strong schematic capture and PCB layout capability using Altium, alongside a solid understanding of microcontrollers and component selection. Working closely with cross-functional teams, the Electronics Engineer will support prototyping, testing and formal release processes, ensuring designs are robust, manufacturable and aligned with long-term product strategy. This Electronics Engineer position suits someone who is methodical, detail-focused and comfortable managing multiple design projects in parallel, with a strong appreciation for obsolescence management and continuous improvement. Key Responsibilities: Design and development of printed circuit assemblies (PCAs) PCB layout and schematic design using Altium Support prototyping, testing and product validation Manage PCB release and documentation control Collaborate with internal teams across engineering and production Requirements: Experience designing PCAs and PCB layouts Strong schematic design capability (Altium preferred) Understanding of microcontrollers / CPUs Awareness of component obsolescence and lifecycle management Strong organisational and communication skills Desirable: Hyperlynx experience Exposure to Z2 database Experience working in cross-functional engineering teams Package: 25 days holiday + bank holidays (rising to 30) 6% pension contribution Private medical insurance Bonus scheme Enhanced family leave TPA Recruit is a specialist recruitment agency acting on behalf of our client to source and assess suitable candidates for this position. All applications will be reviewed and processed by our team, who will liaise directly with shortlisted individuals throughout the hiring process
Apr 01, 2026
Full time
Electronics Engineer Lewes - £45,000-£47,500 (DOE) An opportunity has arisen for an Electronics Engineer to join a growing engineering business in Lewes, supporting the development of advanced electronic systems used in transport technology. This Electronics Engineer position sits within a well-established R&D team and offers involvement across the full product lifecycle. The Electronics Engineer will take ownership of PCA design for both new and legacy products, working on controllers, TFT displays and associated systems. This Electronics Engineer role requires strong schematic capture and PCB layout capability using Altium, alongside a solid understanding of microcontrollers and component selection. Working closely with cross-functional teams, the Electronics Engineer will support prototyping, testing and formal release processes, ensuring designs are robust, manufacturable and aligned with long-term product strategy. This Electronics Engineer position suits someone who is methodical, detail-focused and comfortable managing multiple design projects in parallel, with a strong appreciation for obsolescence management and continuous improvement. Key Responsibilities: Design and development of printed circuit assemblies (PCAs) PCB layout and schematic design using Altium Support prototyping, testing and product validation Manage PCB release and documentation control Collaborate with internal teams across engineering and production Requirements: Experience designing PCAs and PCB layouts Strong schematic design capability (Altium preferred) Understanding of microcontrollers / CPUs Awareness of component obsolescence and lifecycle management Strong organisational and communication skills Desirable: Hyperlynx experience Exposure to Z2 database Experience working in cross-functional engineering teams Package: 25 days holiday + bank holidays (rising to 30) 6% pension contribution Private medical insurance Bonus scheme Enhanced family leave TPA Recruit is a specialist recruitment agency acting on behalf of our client to source and assess suitable candidates for this position. All applications will be reviewed and processed by our team, who will liaise directly with shortlisted individuals throughout the hiring process
Senior Mechanical Design Engineer Location: West Midlands (Hybrid - 2 days on site) Salary: £50,000 - £60,000 Job Type: Permanent Industry: Mechanical Design / EV / High-Power Systems Overview An exciting opportunity for an experienced Senior Mechanical Design Engineer to join a rapidly growing engineering business developing next-generation high-power DC charging systems for commercial electric vehicles. You'll work on complex electro-mechanical and thermal systems , taking designs from concept through prototype and into pre-production. Ideal for engineers with strong CAD, thermal management, liquid cooling and electro-mechanical design experience. The Role Lead mechanical design of high-power charging systems (350kW-1MW+) Create concepts, detailed designs and prototype assemblies Design liquid cooling systems, heat exchangers and thermal management solutions Produce CAD models, drawings and engineering documentation Complete feasibility studies, packaging and system integration Support prototype builds, testing and commissioning Improve manufacturability (DFM/DFA) and product reliability Collaborate with electronics, systems and manufacturing teams Mentor junior engineers and support process development Required Experience Strong mechanical design background in electro-mechanical, thermal or high-power systems Experience with liquid cooling, thermal management or fluid systems Proven track record taking products from concept to prototype and pre-production CAD proficiency (any major package) + PDM/PLM experience Understanding of DFM/DFA and supplier/manufacturing processes Hands-on experience with prototype builds, test rigs or assemblies Desirable EV charging, power electronics or HV equipment exposure Experience in regulated/technical environments (medical, automotive, aerospace) Knowledge of validation testing, instrumentation and data analysis Start-up or scale-up engineering environment experience Apply Now If you're a Senior Mechanical Design Engineer with strong mechanical, thermal or electro-mechanical expertise and want to work on next-generation high-power systems, we'd love to hear from you.
Apr 01, 2026
Full time
Senior Mechanical Design Engineer Location: West Midlands (Hybrid - 2 days on site) Salary: £50,000 - £60,000 Job Type: Permanent Industry: Mechanical Design / EV / High-Power Systems Overview An exciting opportunity for an experienced Senior Mechanical Design Engineer to join a rapidly growing engineering business developing next-generation high-power DC charging systems for commercial electric vehicles. You'll work on complex electro-mechanical and thermal systems , taking designs from concept through prototype and into pre-production. Ideal for engineers with strong CAD, thermal management, liquid cooling and electro-mechanical design experience. The Role Lead mechanical design of high-power charging systems (350kW-1MW+) Create concepts, detailed designs and prototype assemblies Design liquid cooling systems, heat exchangers and thermal management solutions Produce CAD models, drawings and engineering documentation Complete feasibility studies, packaging and system integration Support prototype builds, testing and commissioning Improve manufacturability (DFM/DFA) and product reliability Collaborate with electronics, systems and manufacturing teams Mentor junior engineers and support process development Required Experience Strong mechanical design background in electro-mechanical, thermal or high-power systems Experience with liquid cooling, thermal management or fluid systems Proven track record taking products from concept to prototype and pre-production CAD proficiency (any major package) + PDM/PLM experience Understanding of DFM/DFA and supplier/manufacturing processes Hands-on experience with prototype builds, test rigs or assemblies Desirable EV charging, power electronics or HV equipment exposure Experience in regulated/technical environments (medical, automotive, aerospace) Knowledge of validation testing, instrumentation and data analysis Start-up or scale-up engineering environment experience Apply Now If you're a Senior Mechanical Design Engineer with strong mechanical, thermal or electro-mechanical expertise and want to work on next-generation high-power systems, we'd love to hear from you.
If you are a Full Stack Developer with strong UI experience, we have a new 1-year FTC we'd like to discuss with you. This role would be ideal for someone with 3-5 years' experience and requires 3 days per week onsite in The City of London. About the Company A leading global financial services firm specialising in electronic trading and liquidity solutions is undergoing a significant technology transformation. With an established presence across major financial hubs, the business works with top-tier institutional clients and is investing heavily in modernising its trading platforms and infrastructure. This is an opportunity to join a high-performing, collaborative technology team working on cutting-edge, real-time systems within a fast-paced environment. The Role We're looking for a mid-level Full Stack Developer with strong front-end expertise to play a key role in delivering next-generation trading applications. You'll join a small Agile team, working closely with both technology and business stakeholders on greenfield and enhancement projects, with a particular focus on real-time UI development. This role would suit someone who thrives in a dynamic environment and enjoys building high-performance, user-centric applications. Key Responsibilities Translate user stories into scalable, high-quality technical solutions Contribute to Agile ceremonies including sprint planning, stand-ups, and retrospectives Design, build, test, and deploy applications within a microservices architecture Develop responsive, real-time front-end interfaces for trading workflows Build proof-of-concepts (PoCs) and UI prototypes to support business requirements Write and maintain integration tests as part of the development lifecycle Collaborate with cross-functional teams to deliver key milestones Provide support for production systems when required Technical Skills & Experience Essential: Strong experience with Next.js, React, and TypeScript Solid front-end engineering experience, ideally within real-time or trading environments Experience with WebSockets or SignalR for real-time communication Backend development experience with .NET (C#) and/or Python Strong understanding of REST APIs and microservices architecture Experience with message brokers (e.g. RabbitMQ or Kafka) Knowledge of caching technologies (e.g. Redis) Experience with Azure DevOps / CI/CD pipelines / Git Working knowledge of SQL and NoSQL databases Experience with cloud platforms (Azure or AWS) Desirable: Experience with containerisation (Docker, Kubernetes) Knowledge of financial systems or trading platforms Exposure to FIX protocol Understanding of asset classes such as FX, derivatives, or similar Qualifications & Experience Degree in Computer Science, Engineering, or a related field 2-3 years' experience in full stack or front-end development Prior experience working on data-driven or real-time UI applications preferred Exposure to Agile delivery environments Key Attributes Proactive and self-motivated, with the ability to work independently Comfortable working in a fast-paced, evolving environment Strong attention to detail and quality Effective problem solver with a pragmatic approach Collaborative team player with strong communication skills
Apr 01, 2026
Contractor
If you are a Full Stack Developer with strong UI experience, we have a new 1-year FTC we'd like to discuss with you. This role would be ideal for someone with 3-5 years' experience and requires 3 days per week onsite in The City of London. About the Company A leading global financial services firm specialising in electronic trading and liquidity solutions is undergoing a significant technology transformation. With an established presence across major financial hubs, the business works with top-tier institutional clients and is investing heavily in modernising its trading platforms and infrastructure. This is an opportunity to join a high-performing, collaborative technology team working on cutting-edge, real-time systems within a fast-paced environment. The Role We're looking for a mid-level Full Stack Developer with strong front-end expertise to play a key role in delivering next-generation trading applications. You'll join a small Agile team, working closely with both technology and business stakeholders on greenfield and enhancement projects, with a particular focus on real-time UI development. This role would suit someone who thrives in a dynamic environment and enjoys building high-performance, user-centric applications. Key Responsibilities Translate user stories into scalable, high-quality technical solutions Contribute to Agile ceremonies including sprint planning, stand-ups, and retrospectives Design, build, test, and deploy applications within a microservices architecture Develop responsive, real-time front-end interfaces for trading workflows Build proof-of-concepts (PoCs) and UI prototypes to support business requirements Write and maintain integration tests as part of the development lifecycle Collaborate with cross-functional teams to deliver key milestones Provide support for production systems when required Technical Skills & Experience Essential: Strong experience with Next.js, React, and TypeScript Solid front-end engineering experience, ideally within real-time or trading environments Experience with WebSockets or SignalR for real-time communication Backend development experience with .NET (C#) and/or Python Strong understanding of REST APIs and microservices architecture Experience with message brokers (e.g. RabbitMQ or Kafka) Knowledge of caching technologies (e.g. Redis) Experience with Azure DevOps / CI/CD pipelines / Git Working knowledge of SQL and NoSQL databases Experience with cloud platforms (Azure or AWS) Desirable: Experience with containerisation (Docker, Kubernetes) Knowledge of financial systems or trading platforms Exposure to FIX protocol Understanding of asset classes such as FX, derivatives, or similar Qualifications & Experience Degree in Computer Science, Engineering, or a related field 2-3 years' experience in full stack or front-end development Prior experience working on data-driven or real-time UI applications preferred Exposure to Agile delivery environments Key Attributes Proactive and self-motivated, with the ability to work independently Comfortable working in a fast-paced, evolving environment Strong attention to detail and quality Effective problem solver with a pragmatic approach Collaborative team player with strong communication skills
Jonathan Lee Recruitment
Bromsgrove, Worcestershire
Senior Electronics Engineer Location: Bromsgrove Competitive Salary Overview: We are currently recruiting for a Senior Electronics Engineer to work for our client to play a pivotal role in our growing R&D team. This is more than just a design role, it's an opportunity to take real ownership of cutting-edge technology that directly impacts water quality, environmental monitoring, and sustainability. Our sensors combine advanced electronics and intelligent software to deliver highly accurate, low-noise measurements in real-world environments. You'll be at the heart of this innovation, driving design excellence from concept through to manufacture. If you're passionate about electronics, enjoy solving complex challenges, and want your work to make a tangible difference, we'd like to hear from you. Duties & Responsibilities: Lead electronics design and development Design, develop, and test high-performance electronic systems for advanced sensor technology Translate product requirements into robust technical specifications Deliver optimised PCB designs using Altium Designer Drive quality, standards and process improvement Own electronics templates and component libraries, ensuring consistency and ISO9001 compliance Lead and enhance the electronic design review process Ensure designs are reliable, manufacturable, and scalable Test, validate and refine Debug, test, and validate hardware to achieve best-in-class performance Work hands-on with lab equipment to ensure product reliability Support rapid prototyping, including PCB rework and modification Collaborate and influence Act as the technical interface with manufacturing partners from prototype to production Work closely with firmware and mechanical engineers to deliver fully integrated solutions Mentor and support junior engineers, helping to grow team capability Experience and Background Requirements: HND (or equivalent) in Electronics Engineering, Embedded Systems, or similar Proven experience owning electronic designs within a multidisciplinary R&D environment Strong background in analogue and digital design Experience across the full product lifecycle (concept to manufacture) Experience with high-sensitivity sensors (desirable) Technical expertise Advanced experience with Altium Designer (schematics, PCB layout, libraries) Embedded firmware development (C/C++) and microcontrollers Familiarity with communication protocols and version control systems Strong hands-on debugging and validation skills Confident with soldering and PCB rework Personal strengths Confident leading design and specification reviews Strong stakeholder management and communication skills A collaborative mindset with the ability to work across disciplines Passion for mentoring and developing others Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Apr 01, 2026
Full time
Senior Electronics Engineer Location: Bromsgrove Competitive Salary Overview: We are currently recruiting for a Senior Electronics Engineer to work for our client to play a pivotal role in our growing R&D team. This is more than just a design role, it's an opportunity to take real ownership of cutting-edge technology that directly impacts water quality, environmental monitoring, and sustainability. Our sensors combine advanced electronics and intelligent software to deliver highly accurate, low-noise measurements in real-world environments. You'll be at the heart of this innovation, driving design excellence from concept through to manufacture. If you're passionate about electronics, enjoy solving complex challenges, and want your work to make a tangible difference, we'd like to hear from you. Duties & Responsibilities: Lead electronics design and development Design, develop, and test high-performance electronic systems for advanced sensor technology Translate product requirements into robust technical specifications Deliver optimised PCB designs using Altium Designer Drive quality, standards and process improvement Own electronics templates and component libraries, ensuring consistency and ISO9001 compliance Lead and enhance the electronic design review process Ensure designs are reliable, manufacturable, and scalable Test, validate and refine Debug, test, and validate hardware to achieve best-in-class performance Work hands-on with lab equipment to ensure product reliability Support rapid prototyping, including PCB rework and modification Collaborate and influence Act as the technical interface with manufacturing partners from prototype to production Work closely with firmware and mechanical engineers to deliver fully integrated solutions Mentor and support junior engineers, helping to grow team capability Experience and Background Requirements: HND (or equivalent) in Electronics Engineering, Embedded Systems, or similar Proven experience owning electronic designs within a multidisciplinary R&D environment Strong background in analogue and digital design Experience across the full product lifecycle (concept to manufacture) Experience with high-sensitivity sensors (desirable) Technical expertise Advanced experience with Altium Designer (schematics, PCB layout, libraries) Embedded firmware development (C/C++) and microcontrollers Familiarity with communication protocols and version control systems Strong hands-on debugging and validation skills Confident with soldering and PCB rework Personal strengths Confident leading design and specification reviews Strong stakeholder management and communication skills A collaborative mindset with the ability to work across disciplines Passion for mentoring and developing others Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Our client, an Aerospace and Defence supplier is looking for Manufacturing Engineers to join them on a contract basis at their site in Basildon. Due to the nature of the role, applicants must be willing to undergo basic security checks if successful. 56.50 p/h Umbrella, inside IR35. 12 month initial contract. Onsite in Basildon. What you'll do as a Manufacturing Engineer In this role, you will be responsible for or developing robust solutions to ensure the smooth transition of our new products from design into production. You will be expected to plan and deliver your own work, across medium term planning horizons and provide complex technical advice to both internal and external customers. Typical Accountabilities & activities will include: Developing manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; understanding feedback from operators, conferring with equipment vendors or external suppliers To prepare for and organise Manufacturing Maturity Reviews, maintain governance through the Lifecycle Management process and create / contribute / review and/or lead Manufacturing Plans Provide manufacturing decision-making information with resolution proposals by: Reviewing production schedules; reviewing production labour and material costs; estimating future requirements Prepare product and process reports by collecting, analysing, and summarizing information and trends Ability to resolve complex product and/or production issues & constraints (relieving bottlenecks) on shop floor reacting efficiently to escalation from manufacturing teams Improve manufacturing efficiency by capacity analysis, simulation planning workflow, space requirements, and equipment layout Review manufacturing documentation, can include input to process specific risk assessments, COSHH data, technical reports, specification Assure product and process quality by designing methods; validation/verification of process capabilities; establishing standards; confirming manufacturing processes Contribute to failure investigations to know problem-solving techniques (e.g. 8D) Assure manufacturing data i.e. routings, production plans, control plans and electronic work instructions Identifying continuous improvement activities to develop skills and competencies within Manufacturing Engineering Complete improvement and development projects by training and interacting with the organisations' manufacturing engineer community Promoting a culture of best practice sharing and knowledge exploitation Mentor, coach and develop more junior members of the team in order to develop overall capability Providing domain experience in support of customer and user engagement and product road maps Maintain product and company reputation by complying with government regulations What we need from you Degree in relevant engineering discipline or equivalent experience in role. In depth understanding of manufacturing processes and principles Ability to influence and negotiate with others using data and analysis to support line of reasoning A detailed understanding of the operational framework and business processes An understanding of cross functional / commercial business processes and their own impact Ability to take ownership of a work package; planning and scheduling own workload and the work of others Operational understanding of project work and how the work of the team impacts upon other project activities Demonstrated knowledge and experience of multiple phases of the Product Life Cycle and the associated processes Experience of peer reviewing the work of others inside a product team and within a sub Engineering Unit and ensuring the resulting actions are implemented Demonstrated knowledge of the risk / reward process associated with engineering activity informing the activities of a product team and own sub-engineering unit Ability to communicate concepts in a non-technical way Confidence and ability to challenge / respond to technical / process issues Ability to interact effectively with customers and suppliers Been involved in capability and / or process development, demonstrating an ability to implement a change to working practices It would be nice if you had Experience developing manufacturing capability and understanding of Industry 4.0 / Smart factory principles
Apr 01, 2026
Contractor
Our client, an Aerospace and Defence supplier is looking for Manufacturing Engineers to join them on a contract basis at their site in Basildon. Due to the nature of the role, applicants must be willing to undergo basic security checks if successful. 56.50 p/h Umbrella, inside IR35. 12 month initial contract. Onsite in Basildon. What you'll do as a Manufacturing Engineer In this role, you will be responsible for or developing robust solutions to ensure the smooth transition of our new products from design into production. You will be expected to plan and deliver your own work, across medium term planning horizons and provide complex technical advice to both internal and external customers. Typical Accountabilities & activities will include: Developing manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; understanding feedback from operators, conferring with equipment vendors or external suppliers To prepare for and organise Manufacturing Maturity Reviews, maintain governance through the Lifecycle Management process and create / contribute / review and/or lead Manufacturing Plans Provide manufacturing decision-making information with resolution proposals by: Reviewing production schedules; reviewing production labour and material costs; estimating future requirements Prepare product and process reports by collecting, analysing, and summarizing information and trends Ability to resolve complex product and/or production issues & constraints (relieving bottlenecks) on shop floor reacting efficiently to escalation from manufacturing teams Improve manufacturing efficiency by capacity analysis, simulation planning workflow, space requirements, and equipment layout Review manufacturing documentation, can include input to process specific risk assessments, COSHH data, technical reports, specification Assure product and process quality by designing methods; validation/verification of process capabilities; establishing standards; confirming manufacturing processes Contribute to failure investigations to know problem-solving techniques (e.g. 8D) Assure manufacturing data i.e. routings, production plans, control plans and electronic work instructions Identifying continuous improvement activities to develop skills and competencies within Manufacturing Engineering Complete improvement and development projects by training and interacting with the organisations' manufacturing engineer community Promoting a culture of best practice sharing and knowledge exploitation Mentor, coach and develop more junior members of the team in order to develop overall capability Providing domain experience in support of customer and user engagement and product road maps Maintain product and company reputation by complying with government regulations What we need from you Degree in relevant engineering discipline or equivalent experience in role. In depth understanding of manufacturing processes and principles Ability to influence and negotiate with others using data and analysis to support line of reasoning A detailed understanding of the operational framework and business processes An understanding of cross functional / commercial business processes and their own impact Ability to take ownership of a work package; planning and scheduling own workload and the work of others Operational understanding of project work and how the work of the team impacts upon other project activities Demonstrated knowledge and experience of multiple phases of the Product Life Cycle and the associated processes Experience of peer reviewing the work of others inside a product team and within a sub Engineering Unit and ensuring the resulting actions are implemented Demonstrated knowledge of the risk / reward process associated with engineering activity informing the activities of a product team and own sub-engineering unit Ability to communicate concepts in a non-technical way Confidence and ability to challenge / respond to technical / process issues Ability to interact effectively with customers and suppliers Been involved in capability and / or process development, demonstrating an ability to implement a change to working practices It would be nice if you had Experience developing manufacturing capability and understanding of Industry 4.0 / Smart factory principles
Rf Engineer 3 days p/w onsite Can be based from Edinburgh, Newcastle, Bristol, Luton or Southampton Our client, a leading organisation in the Defence & Security sector, is currently seeking an experienced RF Engineer to join their team on a contract basis. This is an exciting opportunity to work at the forefront of defence technology, developing cutting-edge radars for advanced fighter jets and innovative maritime and airborne surveillance systems. You will have the chance to bring your expertise into a dynamic work environment, contributing to the development of multifunctional RF, PCB, and Module designs using the latest technologies. Key Responsibilities: Managing the full Rf lifecycle, from system concept through detailed design, prototyping, testing, and verification, to system integration and production support. Creating high-quality and robust designs, conducting design reviews, fully documenting and recording work products, and keeping them under configuration management. Designing multifunctional RF PCB and Module designs, enhancing your understanding of key design and manufacturing processes. Developing test prototypes for design validation and verification of development models, and supporting production tests. Carrying out detailed design activities from requirements capture to design verification. Ensuring successful completion of design reviews. Preparing robust manufacturing data packs and providing technical support to sub-contracts and manufacturing interfaces. Collaborating closely with Systems, Test, and Electronics engineers to solve integration problems on advanced systems. Job Requirements: Experience in the following areas is highly desirable: Microwave PCB materials and design techniques RF Microwave Sub-System Design Microwave design tools such as AWR, VSS, ADS, Systemvue, and Matlab EM 3D and 2D simulation techniques, e.g. CST GaAs/GaN MMIC design and application RF Synthesiser design using DDS and PLL technologies RF downconverter and digitiser design Design of passive microwave structures Low phase noise design and measurement Non-linear circuit simulation PCB schematic capture tools, e.g. Mentor Lab measurements including signal generation, spectrum analysis, and vector network analysis Microwave component selection Requirements capture and management Technical report writing, design reviews, and lifecycle management Design for manufacture and cost
Apr 01, 2026
Contractor
Rf Engineer 3 days p/w onsite Can be based from Edinburgh, Newcastle, Bristol, Luton or Southampton Our client, a leading organisation in the Defence & Security sector, is currently seeking an experienced RF Engineer to join their team on a contract basis. This is an exciting opportunity to work at the forefront of defence technology, developing cutting-edge radars for advanced fighter jets and innovative maritime and airborne surveillance systems. You will have the chance to bring your expertise into a dynamic work environment, contributing to the development of multifunctional RF, PCB, and Module designs using the latest technologies. Key Responsibilities: Managing the full Rf lifecycle, from system concept through detailed design, prototyping, testing, and verification, to system integration and production support. Creating high-quality and robust designs, conducting design reviews, fully documenting and recording work products, and keeping them under configuration management. Designing multifunctional RF PCB and Module designs, enhancing your understanding of key design and manufacturing processes. Developing test prototypes for design validation and verification of development models, and supporting production tests. Carrying out detailed design activities from requirements capture to design verification. Ensuring successful completion of design reviews. Preparing robust manufacturing data packs and providing technical support to sub-contracts and manufacturing interfaces. Collaborating closely with Systems, Test, and Electronics engineers to solve integration problems on advanced systems. Job Requirements: Experience in the following areas is highly desirable: Microwave PCB materials and design techniques RF Microwave Sub-System Design Microwave design tools such as AWR, VSS, ADS, Systemvue, and Matlab EM 3D and 2D simulation techniques, e.g. CST GaAs/GaN MMIC design and application RF Synthesiser design using DDS and PLL technologies RF downconverter and digitiser design Design of passive microwave structures Low phase noise design and measurement Non-linear circuit simulation PCB schematic capture tools, e.g. Mentor Lab measurements including signal generation, spectrum analysis, and vector network analysis Microwave component selection Requirements capture and management Technical report writing, design reviews, and lifecycle management Design for manufacture and cost
Job Title: Avionics Design Engineer Job Type: Permanent Industry: Aerospace Job Location: Oxfordshire Salary: Negotiable Due to the nature of this position, the successful candidate must be able to obtain SC Security Clearance Profile Avionics Design Engineer Our client is a global leader in the design and manufacture of rotary aerospace systems used around the world. They are currently looking for an Avionics Design Engineer to join their team. Candidates will have the opportunity to work in an environment where investment is continuous and substantial, technology is leading edge, teamwork is at the forefront of all they do, and personal development is encouraged at every stage. Duties Avionics Design Engineer • Lead the design and integration of avionic systems to meet customer needs and certification standards. • Translate concepts into detailed, compliant designs aligned with OEM Type Certificates. • Manage all avionic activities within a multi-disciplinary environment, ensuring timely delivery. • Capture and interpret customer requirements, providing guidance to optimise design and production. • Apply Systems Engineering practices, tools, and methods throughout the project lifecycle. • Support risk management, testing, and certification processes, including ground and flight testing. • Liaise with customers, suppliers, and production teams to ensure seamless project execution. • Maintain technical competency and stay updated with latest technology developments. Experience/Qualifications Avionics Design Engineer • Knowledge of aircraft systems, software safety analysis, and certification standards (FAR/CS 27 & 29, EASA/CAA Part-21J). • Experience AutoCAD and other electrical/harness design tools. • Experience with design lifecycle management and configuration control. • An engineering degree or equivalent experince. Candidates who are currently a Avionics Engineer, Electronics Engineer, Avionics Systems Engineer, Aircraft Electronics Engineer, Aerospace Systems Engineer, Flights Systems Engineer, Embedded Systems Engineer (Avionics), Hardware Engineer and Systems Integration Engineer could be suitable for this role. To make an application for this role please submit your CV to (url removed) or for more information call (phone number removed). For details of other opportunities available within your chose field please visit our website (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Mar 31, 2026
Full time
Job Title: Avionics Design Engineer Job Type: Permanent Industry: Aerospace Job Location: Oxfordshire Salary: Negotiable Due to the nature of this position, the successful candidate must be able to obtain SC Security Clearance Profile Avionics Design Engineer Our client is a global leader in the design and manufacture of rotary aerospace systems used around the world. They are currently looking for an Avionics Design Engineer to join their team. Candidates will have the opportunity to work in an environment where investment is continuous and substantial, technology is leading edge, teamwork is at the forefront of all they do, and personal development is encouraged at every stage. Duties Avionics Design Engineer • Lead the design and integration of avionic systems to meet customer needs and certification standards. • Translate concepts into detailed, compliant designs aligned with OEM Type Certificates. • Manage all avionic activities within a multi-disciplinary environment, ensuring timely delivery. • Capture and interpret customer requirements, providing guidance to optimise design and production. • Apply Systems Engineering practices, tools, and methods throughout the project lifecycle. • Support risk management, testing, and certification processes, including ground and flight testing. • Liaise with customers, suppliers, and production teams to ensure seamless project execution. • Maintain technical competency and stay updated with latest technology developments. Experience/Qualifications Avionics Design Engineer • Knowledge of aircraft systems, software safety analysis, and certification standards (FAR/CS 27 & 29, EASA/CAA Part-21J). • Experience AutoCAD and other electrical/harness design tools. • Experience with design lifecycle management and configuration control. • An engineering degree or equivalent experince. Candidates who are currently a Avionics Engineer, Electronics Engineer, Avionics Systems Engineer, Aircraft Electronics Engineer, Aerospace Systems Engineer, Flights Systems Engineer, Embedded Systems Engineer (Avionics), Hardware Engineer and Systems Integration Engineer could be suitable for this role. To make an application for this role please submit your CV to (url removed) or for more information call (phone number removed). For details of other opportunities available within your chose field please visit our website (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Job Title: Lead Embedded Software Engineer Location: Cambridge, UK Salary: 60,000 - 75,000 Job Requisition ID: JR(phone number removed) Overview Multimatic is seeking a Lead Embedded Software Engineer to join one of its growing engineering divisions based in Cambridge. This is a key leadership opportunity to shape technical direction, mentor engineers, and influence development practices at an early stage, while benefiting from the stability and long-term investment of a global engineering organisation. The role operates within a highly technical environment delivering embedded software for prototype and production systems, supporting advanced automotive and related OEM programmes. You will work cross-functionally with hardware, systems, and calibration teams, taking ownership of the software lifecycle from concept through to production and customer support. Key Areas of Responsibility Lead the design, development, and delivery of embedded software for both prototype and production systems, ensuring compliance with OEM and industry standards Provide technical leadership and mentorship to a team of embedded software engineers, supporting their development and ensuring high-quality output Define and drive software architecture, coding standards, and best practices across projects Develop and maintain reusable software library blocks to enable scalability and IP reuse across multiple platforms Oversee customer integration activities, including calibration, fault diagnosis, and resolution of complex software issues Own verification, validation, and testing strategies, ensuring robust and safety-compliant solutions Collaborate within an agile environment, promoting continuous improvement across tools, processes, and methodologies Work closely with stakeholders across hardware and systems teams to ensure seamless integration and delivery Ideal Experience and Qualifications Degree in Software Engineering, Computer Engineering, Control Engineering, Applied Physics, or a related discipline Proven experience in a senior or lead embedded software role within regulated or safety-critical environments such as Automotive, Aerospace, or similar Strong proficiency in C for embedded systems, with solid experience applying MISRA C guidelines Demonstrated experience leading or mentoring engineering teams and driving technical direction Strong understanding of real-time systems, including interrupts, peripherals, and 32-bit microcontroller architectures Experience with fixed-point and floating-point arithmetic Good knowledge of compilers, build systems, CI pipelines, and software development toolchains Hands-on experience with Vector tools such as CANoe, CANalyzer, and VFlash Experience working with AUTOSAR architectures (BSW, RTE, ASW), ideally with Vector MICROSAR and DaVinci Desirable Experience Experience with MATLAB and Simulink, including model-based development and code generation Exposure to unit, SIL, and HIL testing methodologies Experience managing and reviewing software requirements System-level understanding of power electronics and control systems Knowledge of ISO 26262 and functional safety frameworks (ASIL)
Mar 31, 2026
Full time
Job Title: Lead Embedded Software Engineer Location: Cambridge, UK Salary: 60,000 - 75,000 Job Requisition ID: JR(phone number removed) Overview Multimatic is seeking a Lead Embedded Software Engineer to join one of its growing engineering divisions based in Cambridge. This is a key leadership opportunity to shape technical direction, mentor engineers, and influence development practices at an early stage, while benefiting from the stability and long-term investment of a global engineering organisation. The role operates within a highly technical environment delivering embedded software for prototype and production systems, supporting advanced automotive and related OEM programmes. You will work cross-functionally with hardware, systems, and calibration teams, taking ownership of the software lifecycle from concept through to production and customer support. Key Areas of Responsibility Lead the design, development, and delivery of embedded software for both prototype and production systems, ensuring compliance with OEM and industry standards Provide technical leadership and mentorship to a team of embedded software engineers, supporting their development and ensuring high-quality output Define and drive software architecture, coding standards, and best practices across projects Develop and maintain reusable software library blocks to enable scalability and IP reuse across multiple platforms Oversee customer integration activities, including calibration, fault diagnosis, and resolution of complex software issues Own verification, validation, and testing strategies, ensuring robust and safety-compliant solutions Collaborate within an agile environment, promoting continuous improvement across tools, processes, and methodologies Work closely with stakeholders across hardware and systems teams to ensure seamless integration and delivery Ideal Experience and Qualifications Degree in Software Engineering, Computer Engineering, Control Engineering, Applied Physics, or a related discipline Proven experience in a senior or lead embedded software role within regulated or safety-critical environments such as Automotive, Aerospace, or similar Strong proficiency in C for embedded systems, with solid experience applying MISRA C guidelines Demonstrated experience leading or mentoring engineering teams and driving technical direction Strong understanding of real-time systems, including interrupts, peripherals, and 32-bit microcontroller architectures Experience with fixed-point and floating-point arithmetic Good knowledge of compilers, build systems, CI pipelines, and software development toolchains Hands-on experience with Vector tools such as CANoe, CANalyzer, and VFlash Experience working with AUTOSAR architectures (BSW, RTE, ASW), ideally with Vector MICROSAR and DaVinci Desirable Experience Experience with MATLAB and Simulink, including model-based development and code generation Exposure to unit, SIL, and HIL testing methodologies Experience managing and reviewing software requirements System-level understanding of power electronics and control systems Knowledge of ISO 26262 and functional safety frameworks (ASIL)
