JOB DESCRIPTION Experienced Principal Systems Engineers, Radar Trials Analysis We are seeking experienced Systems Engineers to contribute to the continued development of an in-service radar system, by supporting the planning and analysis of radar trials (rig-based and flight trials). Successful applicants will have previous experience within a similar industry, and experience supporting engineering tests/trials and processing of large data sets. Key Responsibilities: Work with large datasets from rig and flight trials, and use analytical techniques to evaluate radar performance against requirements and raise Systems Problem Reports (SPR) for detailed investigation. Apply signal processing, image processing, and object classification techniques to extract actionable insights. Investigate system anomalies using real trial data, ensuring performance meets specifications. Work collaboratively with multidisciplinary teams to develop and prototype cutting-edge defense solutions. Contribute to System Verification & Validation (V&V) activities as part of the continuous development/enhancement of the Radar System. Required Skillset: Strong experience with MATLAB, particularly for use in analysis of large data sets. Full V-model life cycle experience, with an emphasis on the middle to right side (implementation, integration, testing, and V&V). Experience in safety-critical systems. Understanding of radar or complex sensor systems would be beneficial. SC Cleared and sole British passport
Jan 13, 2026
Contractor
JOB DESCRIPTION Experienced Principal Systems Engineers, Radar Trials Analysis We are seeking experienced Systems Engineers to contribute to the continued development of an in-service radar system, by supporting the planning and analysis of radar trials (rig-based and flight trials). Successful applicants will have previous experience within a similar industry, and experience supporting engineering tests/trials and processing of large data sets. Key Responsibilities: Work with large datasets from rig and flight trials, and use analytical techniques to evaluate radar performance against requirements and raise Systems Problem Reports (SPR) for detailed investigation. Apply signal processing, image processing, and object classification techniques to extract actionable insights. Investigate system anomalies using real trial data, ensuring performance meets specifications. Work collaboratively with multidisciplinary teams to develop and prototype cutting-edge defense solutions. Contribute to System Verification & Validation (V&V) activities as part of the continuous development/enhancement of the Radar System. Required Skillset: Strong experience with MATLAB, particularly for use in analysis of large data sets. Full V-model life cycle experience, with an emphasis on the middle to right side (implementation, integration, testing, and V&V). Experience in safety-critical systems. Understanding of radar or complex sensor systems would be beneficial. SC Cleared and sole British passport
Trainee Service Centre Engineer You should have a minimum of 5 GCSEs, including Maths, English, and Physics. A-levels or a BTEC in relevant subjects would be an advantage. The company is a leading technology organisation specialising in electronic design and test systems for industries including wireless, automotive, aerospace, and defence. The successful candidate will be trained to understand and work with a range of electronic test systems, electronic signals (from DC to lightwave), and the measurement techniques required for electronic calibration. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Jan 13, 2026
Contractor
Trainee Service Centre Engineer You should have a minimum of 5 GCSEs, including Maths, English, and Physics. A-levels or a BTEC in relevant subjects would be an advantage. The company is a leading technology organisation specialising in electronic design and test systems for industries including wireless, automotive, aerospace, and defence. The successful candidate will be trained to understand and work with a range of electronic test systems, electronic signals (from DC to lightwave), and the measurement techniques required for electronic calibration. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Full Stack Software Engineer Join a trusted supplier delivering mission-critical solutions in the defence and national security sector. You will work on leading-edge technologies across AI/Data Science, Cyber, Cloud, DevOps/SRE, and Platform Engineering, developing solutions that protect people, platforms, and information against constantly evolving threats. The Role As a Full Stack Software Engineer, you will design, develop, and maintain mission-critical softwares. You will work on novel products that combine physical and digital systems, collaborate closely with clients to define strategy, and explore emerging technologies. Key responsibilities include: Writing clean, secure code following a test-driven approach Producing reusable and maintainable code Translating logical designs into physical designs and detailed specifications Documenting work using appropriate standards and tools, including prototyping where needed Working with emerging and well-understood technologies, identifying suitable design patterns Integrating APIs and UI components with existing data stores and services Maintaining and developing architectural components including data ingest, storage, and REST APIs Participating in Agile ceremonies including stand-ups, sprint planning, demos, and epic decomposition Collaborating with user researchers and internal stakeholders to represent user needs Required Skills Java Enterprise development and Spring Boot Front End frameworks such as React, VueJS, or AngularJS Experience with appropriate testing frameworks Technologically curious with the ability and willingness to learn new tools and technologies Security Clearance Candidates must be eligible to obtain DV security clearance due to the nature of this work. Reasonable Adjustments: Respect and equality are core values to us. We are proud of the diverse and inclusive community we have built, and we welcome applications from people of all backgrounds and perspectives. Our success is driven by our people, united by the spirit of partnership to deliver the best resourcing solutions for our clients. If you need any help or adjustments during the recruitment process for any reason , please let us know when you apply or talk to the recruiters directly so we can support you.
Jan 13, 2026
Full time
Full Stack Software Engineer Join a trusted supplier delivering mission-critical solutions in the defence and national security sector. You will work on leading-edge technologies across AI/Data Science, Cyber, Cloud, DevOps/SRE, and Platform Engineering, developing solutions that protect people, platforms, and information against constantly evolving threats. The Role As a Full Stack Software Engineer, you will design, develop, and maintain mission-critical softwares. You will work on novel products that combine physical and digital systems, collaborate closely with clients to define strategy, and explore emerging technologies. Key responsibilities include: Writing clean, secure code following a test-driven approach Producing reusable and maintainable code Translating logical designs into physical designs and detailed specifications Documenting work using appropriate standards and tools, including prototyping where needed Working with emerging and well-understood technologies, identifying suitable design patterns Integrating APIs and UI components with existing data stores and services Maintaining and developing architectural components including data ingest, storage, and REST APIs Participating in Agile ceremonies including stand-ups, sprint planning, demos, and epic decomposition Collaborating with user researchers and internal stakeholders to represent user needs Required Skills Java Enterprise development and Spring Boot Front End frameworks such as React, VueJS, or AngularJS Experience with appropriate testing frameworks Technologically curious with the ability and willingness to learn new tools and technologies Security Clearance Candidates must be eligible to obtain DV security clearance due to the nature of this work. Reasonable Adjustments: Respect and equality are core values to us. We are proud of the diverse and inclusive community we have built, and we welcome applications from people of all backgrounds and perspectives. Our success is driven by our people, united by the spirit of partnership to deliver the best resourcing solutions for our clients. If you need any help or adjustments during the recruitment process for any reason , please let us know when you apply or talk to the recruiters directly so we can support you.
An established industry player is seeking a dynamic Project Engineer to join their innovative team. This role offers a unique opportunity to manage and design cutting-edge cryogenic systems while ensuring project success from inception to completion. With a commitment to quality and excellence, this forward-thinking company provides a supportive environment for career development and long-term progression. If you are passionate about engineering and eager to make a significant impact within a collaborative team, this position is perfect for you.
Jan 13, 2026
Full time
An established industry player is seeking a dynamic Project Engineer to join their innovative team. This role offers a unique opportunity to manage and design cutting-edge cryogenic systems while ensuring project success from inception to completion. With a commitment to quality and excellence, this forward-thinking company provides a supportive environment for career development and long-term progression. If you are passionate about engineering and eager to make a significant impact within a collaborative team, this position is perfect for you.
Artifex Interior Systems is pleased to confirm the below opportunity within our business: MES Engineer This role is on a 3-shift rotation, alternating between afternoons (14:00-22:00), mornings (06:00-14:00) and nights (22:00-06:00) on a weekly basis, with a Sunday night startup. Main purpose of the job This role will form part of the plant technical team for the MES (Manufacturing Execution System) function for new project production launches and all current production processes across multiple Artifex Elmdon plants. Main missions and results Reading of Sorion scripts to fault find. Sorion process additions/alterations (example MY changes). Overall understanding of the full Sorion system. Understanding of changes within Sorion. S21 into Sorion (BoMs). Maintenance of updated Sorion scripts and backups. Ability to create Sorion working sets for development. Ability to implement Sorion working set through a CR (Change Request). Setting up of scanning and printing. Understanding of Orion Database. Reading of PLC code to fault find (Siemens). Assistance to support functions for problem resolution on PLCs. Manual movement and recovery of a robot. Understanding of error messages for fault finding on robotics. Understanding of effect of change to vision system. Management of master settings (vision/sensors). Understanding of setting of: colour sensors, part presence sensors, fixed barcode and RFID readers, and EOL camera systems. Reading of PTL (Pick to Light) scripts to fault find. Process additions/alterations to PTL (Pick to Light - example MY changes). Understanding of changes to PTL (Pick to Light) within Sorion. Maintenance of PTL (Pick to Light) updated scripts and backups. Understanding of how Kepware works with Sorion. Ability to log onto Kepware server to fault find. Ability to update Kepware system for additions/changes. Ability to fault find and resolve issues within Eaton System. Program new part numbers to positions in Eaton System (MY Changes and New Launch). Preferred skills and experience Significant experience in an automotive and engineering environment. Robotic awareness trained for movement, recovery and fault finding (ABB, Nachi and Fanuc). Knowledge of PLC programming and fault finding through to fix. Programming and fault-finding knowledge within Sorion, Orion and Kepware. Audits - ISO19011 training or proven experience in automotive production sector (ISO/TS 16949, IATF16949, VDA). Clear understanding and able to apply PFMEA logic to identify and manage risk/feasibility. Knowledge of: Keyence and Omron Vision, Camera and Sensor Systems. Eaton System programming and fault finding through to fix. ECR (Engineering Change Request) Processes. Knowledge and execution of Practical Problem Solving (Six Sigma Methodology). PCR (Process Change Request) Processes. Waterjet machines and robotics. Key controlling documents (PFMEA, Control Plan and SOI's). Knowledge and Understanding of Launch Process (Gateways). Note: this is not an exhaustive list. All employees are expected to show flexibility and continued self-development to meet the ever-changing needs of the business. All job descriptions / vacancy notices will be subject to continual development. Artifex is an equal opportunities employer and committed to eliminating discrimination and encouraging diversity amongst our workforce. Our aim is that our workforce will be truly representative of all sections of society and each employee feels respected and able to give their best. We oppose all forms of unlawful and unfair discrimination. We are committed to creating an environment in which individual differences and the contributions of all our staff are recognised. Interested? If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV with your contact details. If this job isn't quite what you are looking for but you are looking for a new position within Automotive, please contact us for a confidential discussion on your career.
Jan 13, 2026
Full time
Artifex Interior Systems is pleased to confirm the below opportunity within our business: MES Engineer This role is on a 3-shift rotation, alternating between afternoons (14:00-22:00), mornings (06:00-14:00) and nights (22:00-06:00) on a weekly basis, with a Sunday night startup. Main purpose of the job This role will form part of the plant technical team for the MES (Manufacturing Execution System) function for new project production launches and all current production processes across multiple Artifex Elmdon plants. Main missions and results Reading of Sorion scripts to fault find. Sorion process additions/alterations (example MY changes). Overall understanding of the full Sorion system. Understanding of changes within Sorion. S21 into Sorion (BoMs). Maintenance of updated Sorion scripts and backups. Ability to create Sorion working sets for development. Ability to implement Sorion working set through a CR (Change Request). Setting up of scanning and printing. Understanding of Orion Database. Reading of PLC code to fault find (Siemens). Assistance to support functions for problem resolution on PLCs. Manual movement and recovery of a robot. Understanding of error messages for fault finding on robotics. Understanding of effect of change to vision system. Management of master settings (vision/sensors). Understanding of setting of: colour sensors, part presence sensors, fixed barcode and RFID readers, and EOL camera systems. Reading of PTL (Pick to Light) scripts to fault find. Process additions/alterations to PTL (Pick to Light - example MY changes). Understanding of changes to PTL (Pick to Light) within Sorion. Maintenance of PTL (Pick to Light) updated scripts and backups. Understanding of how Kepware works with Sorion. Ability to log onto Kepware server to fault find. Ability to update Kepware system for additions/changes. Ability to fault find and resolve issues within Eaton System. Program new part numbers to positions in Eaton System (MY Changes and New Launch). Preferred skills and experience Significant experience in an automotive and engineering environment. Robotic awareness trained for movement, recovery and fault finding (ABB, Nachi and Fanuc). Knowledge of PLC programming and fault finding through to fix. Programming and fault-finding knowledge within Sorion, Orion and Kepware. Audits - ISO19011 training or proven experience in automotive production sector (ISO/TS 16949, IATF16949, VDA). Clear understanding and able to apply PFMEA logic to identify and manage risk/feasibility. Knowledge of: Keyence and Omron Vision, Camera and Sensor Systems. Eaton System programming and fault finding through to fix. ECR (Engineering Change Request) Processes. Knowledge and execution of Practical Problem Solving (Six Sigma Methodology). PCR (Process Change Request) Processes. Waterjet machines and robotics. Key controlling documents (PFMEA, Control Plan and SOI's). Knowledge and Understanding of Launch Process (Gateways). Note: this is not an exhaustive list. All employees are expected to show flexibility and continued self-development to meet the ever-changing needs of the business. All job descriptions / vacancy notices will be subject to continual development. Artifex is an equal opportunities employer and committed to eliminating discrimination and encouraging diversity amongst our workforce. Our aim is that our workforce will be truly representative of all sections of society and each employee feels respected and able to give their best. We oppose all forms of unlawful and unfair discrimination. We are committed to creating an environment in which individual differences and the contributions of all our staff are recognised. Interested? If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV with your contact details. If this job isn't quite what you are looking for but you are looking for a new position within Automotive, please contact us for a confidential discussion on your career.
Job Description: Electrical & Controls Technician -Mars Petcare Melton Mowbray £51,900- £56,000 (including shift allowances, DOE) + £2,000 Welcome bonus, Performance Bonus & Exceptional Benefits Shift pattern 12 Hrs - 7-7, 2 days, 2 nights, 4 off Why Join Us? At Melton, we're at the forefront of innovation in high-speed food processing, and we're searching for a talented Electrical & Controls Technician to join our team. This isn't just another job - it's your chance to make an impact, grow your expertise, and work with cutting-edge technology in a fast-paced, dynamic environment. Cutting-Edge Tech: Work with advanced systems like ABB/Kuka robotics, Allen Bradley PLCs, and predictive maintenance tools. Supportive Culture: Be part of a team that values innovation, continuous improvement, and collaboration. The Role We have an opportunity for an Electrical & Controls Technician to join and be responsible for the efficient, safe, and reliable operating condition of complex process and high-speed food processing equipment. The role will mainly focus on providing equipment troubleshooting and breakdown maintenance. As troubleshooting requirements are accomplished, the technician will change focus toward preventive maintenance activities. Systematically repair, adjust, and maintain processing, filling, conveying, and packaging machinery using established maintenance reliability practices, consistent observation, repair, and follow-up of operational effectiveness. Other duties include participating in continuous improvement teams, working on new project activities and continuous training. Shift Pattern - 12 Hours • 2 Days: 7am-7pm • 2 Nights: 7pm-7am and then repeat. What's in it for you? Competitive salary £51,900- £56,000 (including shift allowances, DOE) £2,000 welcome bonus paid in your 1st weeks salary Hot food restaurant on site Career growth opportunities with structured development & Mars University Private healthcare + equal parental leave Generous pension (up to 9% contribution) Life assurance (4x salary) EV salary sacrifice scheme Gym membership & wellbeing support Annual leave starting at 24 days, rising to 32 with service Free parking on site What We're Looking For Practical electrical engineering skills gained through HNC/HND (NVQ Level 4 apprenticeship or equivalent) and BS7671, or comparable hands-on experience in a technical field. Understanding of precision instrumentation-including repair and calibration-or experience with similar technical equipment. Mindset: Strong problem-solving abilities, curiosity, and a drive to improve processes and efficiency. Ability to adapt to various electrical power supplies and control systems, with a willingness to learn new technologies and approaches to equipment maintenance and troubleshooting. Experience in troubleshooting and maintaining automated or electromechanical machinery, or a background in related fields such as industrial maintenance, robotics, or process engineering, with exposure to automation concepts. Key Responsibilities Maintain, troubleshoot, test, and modify automated and electromechanical equipment, applying transferable skills from related technical roles. Apply engineering principles-drawing on both mechanical and electrical knowledge-to resolve production issues and enhance efficiency and reliability. Develop, track, and communicate maintenance metrics to identify, reduce, and eliminate recurring equipment issues, contributing to improved system reliability. Participate in continuous improvement initiatives (such as Lean Manufacturing or Kaizen), bringing fresh perspectives from previous roles or industries. Conduct Root Cause Failure Analysis on major breakdowns and recurring problems, using analytical skills and experience from any technical problem-solving environment. What You Can Expect from Mars Work alongside 130,000+ Associates worldwide guided by our Five Principles Be part of a purpose-driven company shaping "the world we want tomorrow" Access world-class training & development from day one Join a company with an industry-leading salary and benefits package
Jan 13, 2026
Full time
Job Description: Electrical & Controls Technician -Mars Petcare Melton Mowbray £51,900- £56,000 (including shift allowances, DOE) + £2,000 Welcome bonus, Performance Bonus & Exceptional Benefits Shift pattern 12 Hrs - 7-7, 2 days, 2 nights, 4 off Why Join Us? At Melton, we're at the forefront of innovation in high-speed food processing, and we're searching for a talented Electrical & Controls Technician to join our team. This isn't just another job - it's your chance to make an impact, grow your expertise, and work with cutting-edge technology in a fast-paced, dynamic environment. Cutting-Edge Tech: Work with advanced systems like ABB/Kuka robotics, Allen Bradley PLCs, and predictive maintenance tools. Supportive Culture: Be part of a team that values innovation, continuous improvement, and collaboration. The Role We have an opportunity for an Electrical & Controls Technician to join and be responsible for the efficient, safe, and reliable operating condition of complex process and high-speed food processing equipment. The role will mainly focus on providing equipment troubleshooting and breakdown maintenance. As troubleshooting requirements are accomplished, the technician will change focus toward preventive maintenance activities. Systematically repair, adjust, and maintain processing, filling, conveying, and packaging machinery using established maintenance reliability practices, consistent observation, repair, and follow-up of operational effectiveness. Other duties include participating in continuous improvement teams, working on new project activities and continuous training. Shift Pattern - 12 Hours • 2 Days: 7am-7pm • 2 Nights: 7pm-7am and then repeat. What's in it for you? Competitive salary £51,900- £56,000 (including shift allowances, DOE) £2,000 welcome bonus paid in your 1st weeks salary Hot food restaurant on site Career growth opportunities with structured development & Mars University Private healthcare + equal parental leave Generous pension (up to 9% contribution) Life assurance (4x salary) EV salary sacrifice scheme Gym membership & wellbeing support Annual leave starting at 24 days, rising to 32 with service Free parking on site What We're Looking For Practical electrical engineering skills gained through HNC/HND (NVQ Level 4 apprenticeship or equivalent) and BS7671, or comparable hands-on experience in a technical field. Understanding of precision instrumentation-including repair and calibration-or experience with similar technical equipment. Mindset: Strong problem-solving abilities, curiosity, and a drive to improve processes and efficiency. Ability to adapt to various electrical power supplies and control systems, with a willingness to learn new technologies and approaches to equipment maintenance and troubleshooting. Experience in troubleshooting and maintaining automated or electromechanical machinery, or a background in related fields such as industrial maintenance, robotics, or process engineering, with exposure to automation concepts. Key Responsibilities Maintain, troubleshoot, test, and modify automated and electromechanical equipment, applying transferable skills from related technical roles. Apply engineering principles-drawing on both mechanical and electrical knowledge-to resolve production issues and enhance efficiency and reliability. Develop, track, and communicate maintenance metrics to identify, reduce, and eliminate recurring equipment issues, contributing to improved system reliability. Participate in continuous improvement initiatives (such as Lean Manufacturing or Kaizen), bringing fresh perspectives from previous roles or industries. Conduct Root Cause Failure Analysis on major breakdowns and recurring problems, using analytical skills and experience from any technical problem-solving environment. What You Can Expect from Mars Work alongside 130,000+ Associates worldwide guided by our Five Principles Be part of a purpose-driven company shaping "the world we want tomorrow" Access world-class training & development from day one Join a company with an industry-leading salary and benefits package
Amida Consulting Solutions Ltd
Dudley, West Midlands
Proposals Engineer Dudley, West Midlands Sector Experience: Fire Protection Salary: £Competitive The Client They are a leading provider of innovative fire protection, specializing in the design, installation, and maintenance of advanced fire detection and suppression systems. With a commitment to safeguarding lives and property, the company delivers tailored, high-quality services across various sectors, ensuring compliance with stringent safety standards. Their expert team leverages cutting-edge technology to offer reliable, efficient, and discreet fire protection solutions that blend seamlessly into any environment. Please consider this role if you are currently a Proposals Engineer, Estimator, Tendering Engineer, Bid Engineer, Remedial Estimator, Proposals Co-ordinator, Sales Support Engineer, Tender Co-ordinator As the Proposals Engineer within in the Service Department you will be responsible for remedial sales growth aligned to our Service & Maintenance operations. You will have a strong understanding of fixed fire protection systems in accordance with both national and international standards, coupled with excellent analytical skills, organisation and the ability to communicate effectively with the wider team, clients and stakeholders. Responsibilities Build and maintain strong relationships with existing customers. Survey and obtain key asset information to inform estimates. Regular liaison with the service and maintenance team. Review tender documents including drawings, design standards, specifications and client requirements. Develop a detailed proposal document complete utilising in house electronic software. Monitor and progress submitted quotations to obtain client feedback. Attend internal and client meetings. Professionally interact with our customers either through email, telephone or site visits to further client satisfaction & increase sales opportunities. Full driving license Essential Skills Proven technical experience in fire sprinkler systems. Experience of developing technical fire protection proposals. Understanding of fire protection related standards including, but not limited to, BSEN12845, BS9251, BS5306 & BS9990. Strong organisational skills with ability to meet deadlines and changing priorities. Can demonstrate exceptional attention to detail and efficiency. Proven IT skills with experience of MS office packages. Strong commercial awareness with demonstrable numerical skills. Willingness to learn and develop Benefits Competitive salary 25 days holiday, plus bank holidays Company pension Life insurance Company car Please consider this role if you are currently a Proposals Engineer, Estimator, Tendering Engineer, Bid Engineer, Remedial Estimator, Proposals Co-ordinator, Sales Support Engineer, Tender Co-ordinator For information on the role please call Giles Churchill Director - Fire at Amida Solution on (phone number removed). I am available to book calls in from 8am to 8pm Mon to Fri & Weekends.
Jan 13, 2026
Full time
Proposals Engineer Dudley, West Midlands Sector Experience: Fire Protection Salary: £Competitive The Client They are a leading provider of innovative fire protection, specializing in the design, installation, and maintenance of advanced fire detection and suppression systems. With a commitment to safeguarding lives and property, the company delivers tailored, high-quality services across various sectors, ensuring compliance with stringent safety standards. Their expert team leverages cutting-edge technology to offer reliable, efficient, and discreet fire protection solutions that blend seamlessly into any environment. Please consider this role if you are currently a Proposals Engineer, Estimator, Tendering Engineer, Bid Engineer, Remedial Estimator, Proposals Co-ordinator, Sales Support Engineer, Tender Co-ordinator As the Proposals Engineer within in the Service Department you will be responsible for remedial sales growth aligned to our Service & Maintenance operations. You will have a strong understanding of fixed fire protection systems in accordance with both national and international standards, coupled with excellent analytical skills, organisation and the ability to communicate effectively with the wider team, clients and stakeholders. Responsibilities Build and maintain strong relationships with existing customers. Survey and obtain key asset information to inform estimates. Regular liaison with the service and maintenance team. Review tender documents including drawings, design standards, specifications and client requirements. Develop a detailed proposal document complete utilising in house electronic software. Monitor and progress submitted quotations to obtain client feedback. Attend internal and client meetings. Professionally interact with our customers either through email, telephone or site visits to further client satisfaction & increase sales opportunities. Full driving license Essential Skills Proven technical experience in fire sprinkler systems. Experience of developing technical fire protection proposals. Understanding of fire protection related standards including, but not limited to, BSEN12845, BS9251, BS5306 & BS9990. Strong organisational skills with ability to meet deadlines and changing priorities. Can demonstrate exceptional attention to detail and efficiency. Proven IT skills with experience of MS office packages. Strong commercial awareness with demonstrable numerical skills. Willingness to learn and develop Benefits Competitive salary 25 days holiday, plus bank holidays Company pension Life insurance Company car Please consider this role if you are currently a Proposals Engineer, Estimator, Tendering Engineer, Bid Engineer, Remedial Estimator, Proposals Co-ordinator, Sales Support Engineer, Tender Co-ordinator For information on the role please call Giles Churchill Director - Fire at Amida Solution on (phone number removed). I am available to book calls in from 8am to 8pm Mon to Fri & Weekends.
P+S Personnel are pleased to be working on behalf of our clients, who are currently recruiting a Customer Services Account Manager to join their team based in Great Yarmouth on a full time, permanent basis. Role Summary The Customer Services Account Manager is responsible for managing key customer relationships, ensuring exceptional service delivery across the order lifecycle. This role acts as the primary point of contact for assigned accounts, coordinating internally to meet contractual, technical, and schedule requirements. The position demands a proactive, detail-driven individual who can operate confidently in a regulated and fast-moving environment. Main Responsibilities: Customer Relationship & Account Management Serve as the main liaison for designated customers, maintaining strong, trust-based relationships. Understand customer requirements, programme context, and long-term objectives to ensure responsive and informed service. Manage customer expectations on lead times, orders, delivery schedules, and performance metrics. Conduct regular account reviews and support customer audits, visits, and programme meetings. Order Management & Service Delivery Oversee the end-to-end order process, including order entry, acknowledgement, change control, shipment coordination, and delivery confirmation. Ensure order accuracy, configuration compliance, and timely communication of any risks or changes. Coordinate internally with planning, engineering, quality, production, and logistics to resolve issues quickly and effectively. Track delivery performance (OTD), escalate risks, and drive corrective actions with internal teams. Programme & Contract Support Support the interpretation of customer contracts, terms, and defence-sector requirements. Ensure adherence to export controls, security protocols, quality standards (e.g., AS9100, ISO9001), and compliance procedures. Assist in preparing quotations, pricing updates, and proposal submissions for follow-on business or customer requests. Reporting & Continuous Improvement Prepare account performance reports, forecasts, and service metrics for internal leadership and customer presentations. Analyse trends in demand, quality, and delivery performance to identify improvement opportunities. Contribute to process optimisation initiatives that strengthen customer experience and operational efficiency. Person Specification: Ability to interpret contract terms and customer documentation. Confidence in presenting updates to customers and internal leadership. Data-driven mindset with the ability to turn insight into practical action. Proactive, resilient, and comfortable working in an environment with tight deadlines and high stakes. Qualifications & Experience Proven experience in a customer service, account management, or programme support role, ideally within defence, aerospace, or another regulated industry. Strong understanding of order management processes and customer service principles. Ability to work with technical information and collaborate effectively with engineering and manufacturing teams. Familiarity with ERP/MRP systems and standard business software (Excel, Word, PowerPoint). Excellent communication, relationship-building, and problem-solving skills. Demonstrated ability to manage multiple priorities and maintain accuracy under pressure. Eligibility and willingness to comply with defence-sector security and export control requirements. If this is a role you are interested in, please apply online ensuring your CV is up to date.
Jan 13, 2026
Full time
P+S Personnel are pleased to be working on behalf of our clients, who are currently recruiting a Customer Services Account Manager to join their team based in Great Yarmouth on a full time, permanent basis. Role Summary The Customer Services Account Manager is responsible for managing key customer relationships, ensuring exceptional service delivery across the order lifecycle. This role acts as the primary point of contact for assigned accounts, coordinating internally to meet contractual, technical, and schedule requirements. The position demands a proactive, detail-driven individual who can operate confidently in a regulated and fast-moving environment. Main Responsibilities: Customer Relationship & Account Management Serve as the main liaison for designated customers, maintaining strong, trust-based relationships. Understand customer requirements, programme context, and long-term objectives to ensure responsive and informed service. Manage customer expectations on lead times, orders, delivery schedules, and performance metrics. Conduct regular account reviews and support customer audits, visits, and programme meetings. Order Management & Service Delivery Oversee the end-to-end order process, including order entry, acknowledgement, change control, shipment coordination, and delivery confirmation. Ensure order accuracy, configuration compliance, and timely communication of any risks or changes. Coordinate internally with planning, engineering, quality, production, and logistics to resolve issues quickly and effectively. Track delivery performance (OTD), escalate risks, and drive corrective actions with internal teams. Programme & Contract Support Support the interpretation of customer contracts, terms, and defence-sector requirements. Ensure adherence to export controls, security protocols, quality standards (e.g., AS9100, ISO9001), and compliance procedures. Assist in preparing quotations, pricing updates, and proposal submissions for follow-on business or customer requests. Reporting & Continuous Improvement Prepare account performance reports, forecasts, and service metrics for internal leadership and customer presentations. Analyse trends in demand, quality, and delivery performance to identify improvement opportunities. Contribute to process optimisation initiatives that strengthen customer experience and operational efficiency. Person Specification: Ability to interpret contract terms and customer documentation. Confidence in presenting updates to customers and internal leadership. Data-driven mindset with the ability to turn insight into practical action. Proactive, resilient, and comfortable working in an environment with tight deadlines and high stakes. Qualifications & Experience Proven experience in a customer service, account management, or programme support role, ideally within defence, aerospace, or another regulated industry. Strong understanding of order management processes and customer service principles. Ability to work with technical information and collaborate effectively with engineering and manufacturing teams. Familiarity with ERP/MRP systems and standard business software (Excel, Word, PowerPoint). Excellent communication, relationship-building, and problem-solving skills. Demonstrated ability to manage multiple priorities and maintain accuracy under pressure. Eligibility and willingness to comply with defence-sector security and export control requirements. If this is a role you are interested in, please apply online ensuring your CV is up to date.
I'm looking for a Front End Engineer to help build scalable systems and polished user experiences across my client's platform. You'll work with high performance interfaces with React, Next.js, and TypeScript. You'll contribute to architectural decisions, mentor junior developers, and collaborate closely with product, design, and AI/ML specialists to deliver intelligent, future ready features. This role suits someone who thrives in a fast moving environment, enjoys solving complex technical challenges, and takes pride in writing clean, maintainable code that scales. This role will involve at least 3 days per week on site in Bristol. The role has been deemed outside Ir35. Key skills: Frontend mastery: React, Next.js, TypeScript State management - Redux Understanding of UI/UX Architecture, performance, and testing focus Familiarity with AI/ML integration
Jan 13, 2026
Contractor
I'm looking for a Front End Engineer to help build scalable systems and polished user experiences across my client's platform. You'll work with high performance interfaces with React, Next.js, and TypeScript. You'll contribute to architectural decisions, mentor junior developers, and collaborate closely with product, design, and AI/ML specialists to deliver intelligent, future ready features. This role suits someone who thrives in a fast moving environment, enjoys solving complex technical challenges, and takes pride in writing clean, maintainable code that scales. This role will involve at least 3 days per week on site in Bristol. The role has been deemed outside Ir35. Key skills: Frontend mastery: React, Next.js, TypeScript State management - Redux Understanding of UI/UX Architecture, performance, and testing focus Familiarity with AI/ML integration
Job Title: Senior IAM Engineer/IAM Lead (Hands-On) Location: Birmingham, UK | EU-hours supported | Global Scope Environment: Life Sciences/GxP-regulated About the Role: Our client is building its Identity & Access Management (IAM) capability. This is a senior, hands-on role for an experienced IAM practitioner who can both design architecture and execute day-to-day IAM operations across global sites. The role will support US, EU, and other international sites, translating IAM strategy into operational delivery while helping structure the function for scale in a regulated, complex environment. Key Responsibilities: Identity Lifecycle Management Execute end-to-end IAM life cycle for employees and contractors (Joiner/Mover/Leaver). Manage access to email, phone, physical assets, Microsoft 365 licensing, and applications. Support onboarding and offboarding processes across multiple sites and regions. Reduce IAM service backlog and stabilize service quality. IAM Architecture & Integration Support and enhance IAM architecture across Workday, Omada, Active Directory/Entra ID, Microsoft 365, and compliance systems. Manage integrations from Workday Omada downstream systems. Ensure automated, auditable, and compliant provisioning and deprovisioning. IAM Function Build-Out Help structure IAM processes, controls, and operating model. Create and improve documentation, SOPs, and role-based access models. Partner with stakeholders to define governance and access policies. Act as the operational extension of IAM leadership, translating strategy into execution. Operations & Service Management Work within ServiceNow for IAM requests and incidents. Improve IAM service metrics, SLAs, and request fulfillment quality. Provide escalation support and troubleshooting for IAM issues. Security, Compliance & Governance Ensure IAM processes comply with GxP and regulated environments. Maintain auditability and traceability of all access changes. Support compliance and audit requests related to identity and access. Must-Have: 7+ years of IAM experience in enterprise environments. Hands-on experience with Workday IAM integrations, Omada IGA, Active Directory/Entra ID, and Microsoft 365 identity & licensing. Strong understanding of IAM architecture and integrations (beyond ticket execution). Experience Scripting (PowerShell, APIs, connectors). Comfortable working in building-phase or immature IAM environments. Experience using ServiceNow for IAM requests. Strong communication skills - able to collaborate effectively with HR, IT, Security, and business stakeholders.
Jan 13, 2026
Contractor
Job Title: Senior IAM Engineer/IAM Lead (Hands-On) Location: Birmingham, UK | EU-hours supported | Global Scope Environment: Life Sciences/GxP-regulated About the Role: Our client is building its Identity & Access Management (IAM) capability. This is a senior, hands-on role for an experienced IAM practitioner who can both design architecture and execute day-to-day IAM operations across global sites. The role will support US, EU, and other international sites, translating IAM strategy into operational delivery while helping structure the function for scale in a regulated, complex environment. Key Responsibilities: Identity Lifecycle Management Execute end-to-end IAM life cycle for employees and contractors (Joiner/Mover/Leaver). Manage access to email, phone, physical assets, Microsoft 365 licensing, and applications. Support onboarding and offboarding processes across multiple sites and regions. Reduce IAM service backlog and stabilize service quality. IAM Architecture & Integration Support and enhance IAM architecture across Workday, Omada, Active Directory/Entra ID, Microsoft 365, and compliance systems. Manage integrations from Workday Omada downstream systems. Ensure automated, auditable, and compliant provisioning and deprovisioning. IAM Function Build-Out Help structure IAM processes, controls, and operating model. Create and improve documentation, SOPs, and role-based access models. Partner with stakeholders to define governance and access policies. Act as the operational extension of IAM leadership, translating strategy into execution. Operations & Service Management Work within ServiceNow for IAM requests and incidents. Improve IAM service metrics, SLAs, and request fulfillment quality. Provide escalation support and troubleshooting for IAM issues. Security, Compliance & Governance Ensure IAM processes comply with GxP and regulated environments. Maintain auditability and traceability of all access changes. Support compliance and audit requests related to identity and access. Must-Have: 7+ years of IAM experience in enterprise environments. Hands-on experience with Workday IAM integrations, Omada IGA, Active Directory/Entra ID, and Microsoft 365 identity & licensing. Strong understanding of IAM architecture and integrations (beyond ticket execution). Experience Scripting (PowerShell, APIs, connectors). Comfortable working in building-phase or immature IAM environments. Experience using ServiceNow for IAM requests. Strong communication skills - able to collaborate effectively with HR, IT, Security, and business stakeholders.
Streamline Services Consultancy Limited
East Malling, Kent
Mechanical Estimator (M&E Division) Company Overview: We are a prominent player in the mechanical and electrical (M&E) industry, specializing in commercial projects with a strong focus on heat pumps and boiler rooms. With a group turnover of 55 million, our projects range from small to large scale, typically valuing around 3.5 million for M&E services. We pride ourselves on delivering high-quality solutions and maintaining strong client relationships. Job Title: Mechanical Estimator Department: M&E Division Reports to: Estimating Manager Working closely with: Electrical Estimator Location: Flexible working arrangement: 2 days working from home Occasional site visits (travel expenses covered) Job Summary: The Mechanical Estimator will be responsible for preparing accurate and competitive estimates for mechanical aspects of M&E projects. This role involves analyzing project specifications, collaborating with the Electrical Estimator, and ensuring that estimates are aligned with project requirements and company standards. The successful candidate will have room for career progression within our dynamic and growing company. Key Responsibilities: Review and analyze project specifications, drawings, and other documentation to prepare detailed and accurate cost estimates for mechanical systems, including heat pumps and boiler rooms. Collaborate with the Estimating Manager and Electrical Estimator to develop comprehensive M&E project estimates. Obtain and evaluate supplier and subcontractor quotes to ensure competitive pricing and compliance with project specifications. Prepare and present detailed cost breakdowns and proposals to management and clients. Conduct site visits to gather information and assess project conditions when necessary. Maintain up-to-date knowledge of industry standards, trends, and pricing. Assist in the development and improvement of estimating processes and tools. Participate in post-tender reviews and negotiations with clients and subcontractors. Qualifications and Skills: Proven experience as a Mechanical Estimator in the M&E industry, preferably with experience in heat pumps and boiler rooms. Strong understanding of mechanical systems and their integration into commercial projects. Proficiency in estimating software and tools. Excellent analytical and mathematical skills. Strong communication and interpersonal skills for effective collaboration with team members, suppliers, and clients. Ability to work independently and manage multiple projects simultaneously. Detail-oriented with a focus on accuracy and quality. Willingness to travel for occasional site visits. Education: Degree or equivalent qualification in Mechanical Engineering, Building Services Engineering, or a related field. Benefits: Competitive salary based on experience. Flexible working arrangement with 2 days working from home. Travel expenses covered for site visits. Opportunities for career progression within the company. Supportive and collaborative working environment.
Jan 13, 2026
Full time
Mechanical Estimator (M&E Division) Company Overview: We are a prominent player in the mechanical and electrical (M&E) industry, specializing in commercial projects with a strong focus on heat pumps and boiler rooms. With a group turnover of 55 million, our projects range from small to large scale, typically valuing around 3.5 million for M&E services. We pride ourselves on delivering high-quality solutions and maintaining strong client relationships. Job Title: Mechanical Estimator Department: M&E Division Reports to: Estimating Manager Working closely with: Electrical Estimator Location: Flexible working arrangement: 2 days working from home Occasional site visits (travel expenses covered) Job Summary: The Mechanical Estimator will be responsible for preparing accurate and competitive estimates for mechanical aspects of M&E projects. This role involves analyzing project specifications, collaborating with the Electrical Estimator, and ensuring that estimates are aligned with project requirements and company standards. The successful candidate will have room for career progression within our dynamic and growing company. Key Responsibilities: Review and analyze project specifications, drawings, and other documentation to prepare detailed and accurate cost estimates for mechanical systems, including heat pumps and boiler rooms. Collaborate with the Estimating Manager and Electrical Estimator to develop comprehensive M&E project estimates. Obtain and evaluate supplier and subcontractor quotes to ensure competitive pricing and compliance with project specifications. Prepare and present detailed cost breakdowns and proposals to management and clients. Conduct site visits to gather information and assess project conditions when necessary. Maintain up-to-date knowledge of industry standards, trends, and pricing. Assist in the development and improvement of estimating processes and tools. Participate in post-tender reviews and negotiations with clients and subcontractors. Qualifications and Skills: Proven experience as a Mechanical Estimator in the M&E industry, preferably with experience in heat pumps and boiler rooms. Strong understanding of mechanical systems and their integration into commercial projects. Proficiency in estimating software and tools. Excellent analytical and mathematical skills. Strong communication and interpersonal skills for effective collaboration with team members, suppliers, and clients. Ability to work independently and manage multiple projects simultaneously. Detail-oriented with a focus on accuracy and quality. Willingness to travel for occasional site visits. Education: Degree or equivalent qualification in Mechanical Engineering, Building Services Engineering, or a related field. Benefits: Competitive salary based on experience. Flexible working arrangement with 2 days working from home. Travel expenses covered for site visits. Opportunities for career progression within the company. Supportive and collaborative working environment.
Sanderson Government & Defence
Cheltenham, Gloucestershire
Role: Infrastructure Engineer (All levels) Location: Cheltenham or London Contract duration: 6-12 months Clearance level: eDV We provide talent solutions for the UK government and their critical supply chains. We currently are on the look out for eDV cleared infrastructure professionals to join our National Security sector. Key skills: Windows administration, hardening, deployment, management architectures, client and endpoint management and device control. Linux administration, hardening, deployment, management architectures, client and endpoint management and device control. Domain services - AD, LDAP, patching, AV, backup and auditing. Monitoring technologies - Elastic, Kibana, Logstash, Grafana. Containerisation - Docker and Kubernetes management, deployment, monitoring, hardening, design patterns and principles. Cloud engineering - cloud native design principles and patterns on AWS and Azure, IaC, CI/CD, automation, scaling, security-in-depth, FinOps. Hosting environments - platform management and hardening, cloud hosting environments. Virtualisation - VMWare, ESXi and hyper converged infrastructure. Databases - SQL and NoSQL. Boundary control systems - gateways, diodes, Firewalls, proxies. Networks - LAN & WAN (mainly Cisco), Zero Trust Architectures. Storage - SAN & NAS (mainly EMC). Messaging - Exchange Dataflow - NiFi, cloud to and from on-prem. CI/CD - Bitbucket, GitLab, Concourse, Jenkins. Sustainable engineering patterns and design principles. DevOps ways of working. If you think you would be a good fit please apply with your most recent CV or reach out for more information Reasonable Adjustments: Respect and equality are core values to us. We are proud of the diverse and inclusive community we have built, and we welcome applications from people of all backgrounds and perspectives. Our success is driven by our people, united by the spirit of partnership to deliver the best resourcing solutions for our clients. If you need any help or adjustments during the recruitment process for any reason , please let us know when you apply or talk to the recruiters directly so we can support you.
Jan 13, 2026
Contractor
Role: Infrastructure Engineer (All levels) Location: Cheltenham or London Contract duration: 6-12 months Clearance level: eDV We provide talent solutions for the UK government and their critical supply chains. We currently are on the look out for eDV cleared infrastructure professionals to join our National Security sector. Key skills: Windows administration, hardening, deployment, management architectures, client and endpoint management and device control. Linux administration, hardening, deployment, management architectures, client and endpoint management and device control. Domain services - AD, LDAP, patching, AV, backup and auditing. Monitoring technologies - Elastic, Kibana, Logstash, Grafana. Containerisation - Docker and Kubernetes management, deployment, monitoring, hardening, design patterns and principles. Cloud engineering - cloud native design principles and patterns on AWS and Azure, IaC, CI/CD, automation, scaling, security-in-depth, FinOps. Hosting environments - platform management and hardening, cloud hosting environments. Virtualisation - VMWare, ESXi and hyper converged infrastructure. Databases - SQL and NoSQL. Boundary control systems - gateways, diodes, Firewalls, proxies. Networks - LAN & WAN (mainly Cisco), Zero Trust Architectures. Storage - SAN & NAS (mainly EMC). Messaging - Exchange Dataflow - NiFi, cloud to and from on-prem. CI/CD - Bitbucket, GitLab, Concourse, Jenkins. Sustainable engineering patterns and design principles. DevOps ways of working. If you think you would be a good fit please apply with your most recent CV or reach out for more information Reasonable Adjustments: Respect and equality are core values to us. We are proud of the diverse and inclusive community we have built, and we welcome applications from people of all backgrounds and perspectives. Our success is driven by our people, united by the spirit of partnership to deliver the best resourcing solutions for our clients. If you need any help or adjustments during the recruitment process for any reason , please let us know when you apply or talk to the recruiters directly so we can support you.
Job Description The role will work on the HS2 project. HS2 is the UK's new high speed rail network. It will be a catalyst for economic growth across Britain, freeing up space on the existing railways and connecting 8 out of the UK's 10 biggest cities with fast, reliable and frequent high speed services. Costain are delivering the HS2 Rail Systems Tunnel and Lineside Mechanical and Electrical Systems works for HS2, across the whole of the HS2 Route. The scope of the Mechanical and Electrical systems includes the installation of the construction and permanent tunnel ventilation, systems, lighting and electrical networks, fire main and other key safety elements. The value of the scheme at award is £500m. The role holder will be required to be a key contributor in establishing and maintaining standards of excellence in Health, Safety, Wellbeing and Security standards on the programme. You will support the HSSW Director and Senior Leadership Team in the safe delivery of all aspects of the programme. As the Head of Health, Safety, Security & Wellbeing, you will be heading up the HSSW function. You will be responsible for the HSSW management system, assurance programme, HSSW performance management, delivery of the behavioural management and Love for Life Behavioural programme and the effective implementation of the event investigation process. You will ensure that we meet, and where possible exceed client requirements / expectations and embed continual improvement and innovative processes throughout the lifecycle of the project. Responsibilities Key Responsibilities Develop and provide line management to direct reports and liaise with wider SHE Team Support and influence Contract Leadership Team, Clients and other Stakeholders and compliance with the Group SHE Management System and Contract Performance Ensure delivery of training and coaching, by competent individuals, to allow the contract team to successfully implement the Group SHE Management System Be actively involved in the appointment and ongoing assessment of the Contracts Supply Chain Contractors Actively support the delivery of the annual Contract and Group SHE Objectives Develop & implement a Contract SHE Assurance programme to ensure compliance with company and statutory requirements Ensure all unplanned events and assurance findings are categorised, investigated and lessons are shared in accordance with the Group SHE Management System Timely reporting, analysis and use of SHE data to support and influence the Contract Leadership Team and where required develop and implement data based improvement plans Experience Essential: Maintain own level of knowledge and competency in relation to HSSW, including appropriate qualifications and professional membership Extensive and well documented health and safety related experience Significant experience leading sector, divisional and/or business unit functional departments Major and mega project experience Experience of managing large teams Collaborative behaviour Desirable: Experience in heavy underground engineering (mining and tunneling) Extensive and well documented relevant SHE experience in the construction engineering industry Significant experience in the management of large, geographically diverse teams Experience working with multi national / international workforces Framework behaviours: Persuasive, Socially Confident, Democratic, Adaptable Qualifications Essential: Relevant Degree or Diploma or equivalent NVQ Level 6 Working towards MIEMA or CMIOSH or equivalent Desirable: Institute of Leadership and Management Level 5 Line Managers toolkit or equivalent CMIOSH or MIEMA or equivalent About Us Costain helps to improve people's lives with integrated, leading edge, smart infrastructure solutions across the UK's energy, water, transportation and defence markets. We help our clients improve their business performance by increasing capacity, improving customer service, safeguarding security, enhancing resilience, decarbonising and delivering increased efficiency. Our vision is to be the UK's leading smart infrastructure solutions company. We will achieve this by focusing on blue chip clients whose major spending plans are underpinned by strategic national needs, regulatory commitments, legislation or essential performance requirements. We offer our clients leading edge solutions that are digitally optimised through the following five services which cover the whole lifecycle of their assets: future shaping strategic consultancy; consultancy and advisory; digital technology solutions; asset optimisation and complex programme delivery. Our culture and values underpin everything we do. A Disability Confident employer will generally offer an interview to any applicant that disclose they have a disability and meets the minimum criteria for the job as defined by the employer. It is important to note that in certain recruitment situations such as high volume, seasonal and high peak times, the employer may wish to limit the overall numbers of interviews offered to both disabled people and non disabled people. For more details please go to the Disability Confident website:
Jan 13, 2026
Full time
Job Description The role will work on the HS2 project. HS2 is the UK's new high speed rail network. It will be a catalyst for economic growth across Britain, freeing up space on the existing railways and connecting 8 out of the UK's 10 biggest cities with fast, reliable and frequent high speed services. Costain are delivering the HS2 Rail Systems Tunnel and Lineside Mechanical and Electrical Systems works for HS2, across the whole of the HS2 Route. The scope of the Mechanical and Electrical systems includes the installation of the construction and permanent tunnel ventilation, systems, lighting and electrical networks, fire main and other key safety elements. The value of the scheme at award is £500m. The role holder will be required to be a key contributor in establishing and maintaining standards of excellence in Health, Safety, Wellbeing and Security standards on the programme. You will support the HSSW Director and Senior Leadership Team in the safe delivery of all aspects of the programme. As the Head of Health, Safety, Security & Wellbeing, you will be heading up the HSSW function. You will be responsible for the HSSW management system, assurance programme, HSSW performance management, delivery of the behavioural management and Love for Life Behavioural programme and the effective implementation of the event investigation process. You will ensure that we meet, and where possible exceed client requirements / expectations and embed continual improvement and innovative processes throughout the lifecycle of the project. Responsibilities Key Responsibilities Develop and provide line management to direct reports and liaise with wider SHE Team Support and influence Contract Leadership Team, Clients and other Stakeholders and compliance with the Group SHE Management System and Contract Performance Ensure delivery of training and coaching, by competent individuals, to allow the contract team to successfully implement the Group SHE Management System Be actively involved in the appointment and ongoing assessment of the Contracts Supply Chain Contractors Actively support the delivery of the annual Contract and Group SHE Objectives Develop & implement a Contract SHE Assurance programme to ensure compliance with company and statutory requirements Ensure all unplanned events and assurance findings are categorised, investigated and lessons are shared in accordance with the Group SHE Management System Timely reporting, analysis and use of SHE data to support and influence the Contract Leadership Team and where required develop and implement data based improvement plans Experience Essential: Maintain own level of knowledge and competency in relation to HSSW, including appropriate qualifications and professional membership Extensive and well documented health and safety related experience Significant experience leading sector, divisional and/or business unit functional departments Major and mega project experience Experience of managing large teams Collaborative behaviour Desirable: Experience in heavy underground engineering (mining and tunneling) Extensive and well documented relevant SHE experience in the construction engineering industry Significant experience in the management of large, geographically diverse teams Experience working with multi national / international workforces Framework behaviours: Persuasive, Socially Confident, Democratic, Adaptable Qualifications Essential: Relevant Degree or Diploma or equivalent NVQ Level 6 Working towards MIEMA or CMIOSH or equivalent Desirable: Institute of Leadership and Management Level 5 Line Managers toolkit or equivalent CMIOSH or MIEMA or equivalent About Us Costain helps to improve people's lives with integrated, leading edge, smart infrastructure solutions across the UK's energy, water, transportation and defence markets. We help our clients improve their business performance by increasing capacity, improving customer service, safeguarding security, enhancing resilience, decarbonising and delivering increased efficiency. Our vision is to be the UK's leading smart infrastructure solutions company. We will achieve this by focusing on blue chip clients whose major spending plans are underpinned by strategic national needs, regulatory commitments, legislation or essential performance requirements. We offer our clients leading edge solutions that are digitally optimised through the following five services which cover the whole lifecycle of their assets: future shaping strategic consultancy; consultancy and advisory; digital technology solutions; asset optimisation and complex programme delivery. Our culture and values underpin everything we do. A Disability Confident employer will generally offer an interview to any applicant that disclose they have a disability and meets the minimum criteria for the job as defined by the employer. It is important to note that in certain recruitment situations such as high volume, seasonal and high peak times, the employer may wish to limit the overall numbers of interviews offered to both disabled people and non disabled people. For more details please go to the Disability Confident website:
A housing service provider in Peterborough is seeking a qualified Gas Engineer. The role involves supporting repairs, ensuring compliance with safety regulations, and performing maintenance tasks on heating systems. Candidates should hold appropriate ACS certifications, have experience in plumbing, and a valid UK Driving License. Benefits include a company van, annual leave, and staff perks. This position requires a reliable individual ready for additional hours as needed.
Jan 13, 2026
Full time
A housing service provider in Peterborough is seeking a qualified Gas Engineer. The role involves supporting repairs, ensuring compliance with safety regulations, and performing maintenance tasks on heating systems. Candidates should hold appropriate ACS certifications, have experience in plumbing, and a valid UK Driving License. Benefits include a company van, annual leave, and staff perks. This position requires a reliable individual ready for additional hours as needed.
Interim Financial Controller job in Cornwall Interim Financial ControllerLocation: Liskeard area (On-site) Employment Type: Full-time Salary: Competitive, dependent on experience About the RoleWe are seeking a technically strong and commercially astute finance professional to join our clients finance team as an Interim Financial Controller. This position is well-suited to someone currently working in accountancy practice who is ready to transition into industry and take ownership of financial operations within a fast-paced engineering environment. Key Responsibilities Prepare statutory accounts, management accounts, and journal entries for reviewMaintain general ledger accuracy and complete monthly reconciliationsOversee shared service accounting functions and ensure precise financial reportingSupport budgeting, forecasting, and wider financial planning activitiesProcess financial data using internal systems and provide analysis of outputsPlay an active role in financial data processing and ongoing financial managementCollaborate closely with colleagues to ensure the timely completion of all finance tasksEnsure compliance with relevant engineering-sector financial regulations and reporting standardsLead improvements in financial systems, processes, and internal controls Industry-Specific ChallengesNavigating complex engineering compliance requirements and project based cost accountingManaging asset intensive balance sheets, including machinery, equipment, and capital projectsHandling variable operational cycles driven by project timelines and client demandEnsuring accurate revenue recognition and contract accounting for engineered products and services Qualifications & ExperienceQBE (Qualified by Experience)AAT Level 3 or higher advantageous but not essentialACCA or CIMA part qualified/qualified preferred but not requiredStrong technical accounting knowledgeExperience working within a busy, multi-entity environment is beneficialConfident user of financial systems and ExcelExceptional attention to detail and strong analytical capabilitiesEffective communicator with the ability to thrive in a fast-paced settingAbility to manage workflow efficiently and handle supplier or customer financial queries DesirableExperience in engineering or other asset intensive industriesFamiliarity with UK GAAP and IFRSExposure to ERP systems #
Jan 13, 2026
Contractor
Interim Financial Controller job in Cornwall Interim Financial ControllerLocation: Liskeard area (On-site) Employment Type: Full-time Salary: Competitive, dependent on experience About the RoleWe are seeking a technically strong and commercially astute finance professional to join our clients finance team as an Interim Financial Controller. This position is well-suited to someone currently working in accountancy practice who is ready to transition into industry and take ownership of financial operations within a fast-paced engineering environment. Key Responsibilities Prepare statutory accounts, management accounts, and journal entries for reviewMaintain general ledger accuracy and complete monthly reconciliationsOversee shared service accounting functions and ensure precise financial reportingSupport budgeting, forecasting, and wider financial planning activitiesProcess financial data using internal systems and provide analysis of outputsPlay an active role in financial data processing and ongoing financial managementCollaborate closely with colleagues to ensure the timely completion of all finance tasksEnsure compliance with relevant engineering-sector financial regulations and reporting standardsLead improvements in financial systems, processes, and internal controls Industry-Specific ChallengesNavigating complex engineering compliance requirements and project based cost accountingManaging asset intensive balance sheets, including machinery, equipment, and capital projectsHandling variable operational cycles driven by project timelines and client demandEnsuring accurate revenue recognition and contract accounting for engineered products and services Qualifications & ExperienceQBE (Qualified by Experience)AAT Level 3 or higher advantageous but not essentialACCA or CIMA part qualified/qualified preferred but not requiredStrong technical accounting knowledgeExperience working within a busy, multi-entity environment is beneficialConfident user of financial systems and ExcelExceptional attention to detail and strong analytical capabilitiesEffective communicator with the ability to thrive in a fast-paced settingAbility to manage workflow efficiently and handle supplier or customer financial queries DesirableExperience in engineering or other asset intensive industriesFamiliarity with UK GAAP and IFRSExposure to ERP systems #
We're looking for a Mechanical Engineer to join our Design team based in Salford / Birmingham / Gerrards Cross / Speke . Kier Design are a top-25 engineering consultancy, delivering a wide range of services across all sectors of the built environment, providing construction-focused, innovative and sustainable solutions. We have preferential access to Kier's £11bn+ project pipeline, including mega projects like High Speed 2 and Hinkley Point C, frameworks with national and local government and other public bodies, and a range of other interesting projects in every sector of the built environment. We believe in building teams around our people, rather than squeezing people into our teams, we want to help you carve out a role in which you'll grow and thrive for many years to come. Offering market-leading development opportunities, supporting our graduates through the early stages of their careers, enabling our people to become professionally qualified, providing management training and qualifications, and supporting ongoing technical development throughout our people's careers. Actively promoting, so you can keep pushing and stretching yourself. Within this role, you can enjoy competitive annual holiday entitlement with opportunities to buy leave, a fantastic, matched pension scheme, a share in the success you help to create by investing in Kier through our Sharesave and Share Incentive Plans and even more Location : Salford / Birmingham / Gerrards Cross / Speke Hours : 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us What will you be responsible for? As Mechanical Engineer , you'll be working within the Mechanical Electrical and Technology team, supporting in designing, delivering, and managing the mechanical aspects of complex infrastructure projects (like water/wastewater), overseeing everything from concept to commissioning, liaising with teams, managing suppliers, ensuring compliance, and handling technical documentation for mechanical systems within these integrated projects, often involving site work, design, and procurement. Your day to day will include: Overall Mechanical design, as part of an integrated design solution for industrial and process clients, dealing with process control systems, e.g. water and waste water treatment systems Preparation of, and agreement of mechanical design requirements from the clients remit, ensuring it is fully understood, questioning and challenging where necessary, producing detailed mechanical designs including mechanical options for pumping stations, treatment works, and network assets for both potable water and wastewater applications Providing support for mechanical design including; feasibility studies, outline design, production and evaluation of concepts; focussed on buildability, efficiency, innovation, enabling cost estimates to be developed, undertaking and organising; site visits, surveys, inspections, reporting and advising on SHE issues, attending internal and external meetings on Kier's behalf Complying designs with UK water industry standards (WIMES), British Standards, Water Regulations, CDM 2015 and client specifications Supporting HAZOP, HAZCOM, and constructability reviews, working with civil, electrical and process engineers promoting integrated, efficient asset design What are we looking for? This role of Mechanical Engineer is great for you if: Chartered Engineer; Membership of appropriate Professional Body (IET or IMechE), bring extensive experience within the water, wastewater or process related industries, including hydraulic design and pumping systems Experience and detailed knowledge of SHE (Safety, Health & Environment) requirements Have the ability to work under pressure, making critical decisions Ability to pass the BPSS (Baseline Personnel Security Standard) requirements Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here . Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here . We look forward to seeing your application to join the
Jan 13, 2026
Full time
We're looking for a Mechanical Engineer to join our Design team based in Salford / Birmingham / Gerrards Cross / Speke . Kier Design are a top-25 engineering consultancy, delivering a wide range of services across all sectors of the built environment, providing construction-focused, innovative and sustainable solutions. We have preferential access to Kier's £11bn+ project pipeline, including mega projects like High Speed 2 and Hinkley Point C, frameworks with national and local government and other public bodies, and a range of other interesting projects in every sector of the built environment. We believe in building teams around our people, rather than squeezing people into our teams, we want to help you carve out a role in which you'll grow and thrive for many years to come. Offering market-leading development opportunities, supporting our graduates through the early stages of their careers, enabling our people to become professionally qualified, providing management training and qualifications, and supporting ongoing technical development throughout our people's careers. Actively promoting, so you can keep pushing and stretching yourself. Within this role, you can enjoy competitive annual holiday entitlement with opportunities to buy leave, a fantastic, matched pension scheme, a share in the success you help to create by investing in Kier through our Sharesave and Share Incentive Plans and even more Location : Salford / Birmingham / Gerrards Cross / Speke Hours : 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us What will you be responsible for? As Mechanical Engineer , you'll be working within the Mechanical Electrical and Technology team, supporting in designing, delivering, and managing the mechanical aspects of complex infrastructure projects (like water/wastewater), overseeing everything from concept to commissioning, liaising with teams, managing suppliers, ensuring compliance, and handling technical documentation for mechanical systems within these integrated projects, often involving site work, design, and procurement. Your day to day will include: Overall Mechanical design, as part of an integrated design solution for industrial and process clients, dealing with process control systems, e.g. water and waste water treatment systems Preparation of, and agreement of mechanical design requirements from the clients remit, ensuring it is fully understood, questioning and challenging where necessary, producing detailed mechanical designs including mechanical options for pumping stations, treatment works, and network assets for both potable water and wastewater applications Providing support for mechanical design including; feasibility studies, outline design, production and evaluation of concepts; focussed on buildability, efficiency, innovation, enabling cost estimates to be developed, undertaking and organising; site visits, surveys, inspections, reporting and advising on SHE issues, attending internal and external meetings on Kier's behalf Complying designs with UK water industry standards (WIMES), British Standards, Water Regulations, CDM 2015 and client specifications Supporting HAZOP, HAZCOM, and constructability reviews, working with civil, electrical and process engineers promoting integrated, efficient asset design What are we looking for? This role of Mechanical Engineer is great for you if: Chartered Engineer; Membership of appropriate Professional Body (IET or IMechE), bring extensive experience within the water, wastewater or process related industries, including hydraulic design and pumping systems Experience and detailed knowledge of SHE (Safety, Health & Environment) requirements Have the ability to work under pressure, making critical decisions Ability to pass the BPSS (Baseline Personnel Security Standard) requirements Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here . Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here . We look forward to seeing your application to join the
Supply Chain Planner North Greenwich 6 month Contract Position Monday- Friday: 08:30 - 17:00 £11 - £14 P/H Working for a multinational Engineering company based in South East London we are urgently recruiting for an experienced Supply Chain Planner. We are willing to train suitable candidates, however you must have previous experience with Powerpoint & Excel, supply chain experience and system work and be a confident communicator, as you will be liaising with all of the company's suppliers. The Expeditor will sit within the Materials & Inventory Control department, liaising with the in-house Supply Chain, Procurement & Buying professionals. Your role will involve expediting products to production plans via supply chains; Where products are behind schedule, to take remedial action and report to management, and also to raise works order cards. You will be key in ensuring all products are staged appropriately for the next production operation, working closely with planning departments in all areas of the business to manage the progression of all work orders. Duties will include Reporting material availability and departmental performance to senior management Responsible for third party manufacturing co-ordination and quarterly stock analysis & summaries Co-ordination of supply via MRP actioning and review within SAP systems PO confirmations, reschedules & expediting of orders (using SAP based reporting tools) Master data & Routing creation and analysis/verification Designed KPI reports for stock vs. reservations and departmental workload for power feed area Designed KPI Dashboard to report on Stores workload and task execution Configuration and testing of new warehouse management system Guideline and script creation/reviews for work process flows across Materials Department Essential Skills Required SAP user knowledge Call off experience Supply chain work experience Excellent Communication skills Excel and Power point user to advanced level
Jan 13, 2026
Full time
Supply Chain Planner North Greenwich 6 month Contract Position Monday- Friday: 08:30 - 17:00 £11 - £14 P/H Working for a multinational Engineering company based in South East London we are urgently recruiting for an experienced Supply Chain Planner. We are willing to train suitable candidates, however you must have previous experience with Powerpoint & Excel, supply chain experience and system work and be a confident communicator, as you will be liaising with all of the company's suppliers. The Expeditor will sit within the Materials & Inventory Control department, liaising with the in-house Supply Chain, Procurement & Buying professionals. Your role will involve expediting products to production plans via supply chains; Where products are behind schedule, to take remedial action and report to management, and also to raise works order cards. You will be key in ensuring all products are staged appropriately for the next production operation, working closely with planning departments in all areas of the business to manage the progression of all work orders. Duties will include Reporting material availability and departmental performance to senior management Responsible for third party manufacturing co-ordination and quarterly stock analysis & summaries Co-ordination of supply via MRP actioning and review within SAP systems PO confirmations, reschedules & expediting of orders (using SAP based reporting tools) Master data & Routing creation and analysis/verification Designed KPI reports for stock vs. reservations and departmental workload for power feed area Designed KPI Dashboard to report on Stores workload and task execution Configuration and testing of new warehouse management system Guideline and script creation/reviews for work process flows across Materials Department Essential Skills Required SAP user knowledge Call off experience Supply chain work experience Excellent Communication skills Excel and Power point user to advanced level
We're supporting a specialist building services provider looking to add a BMS Service and Small Works Engineer to their London-based team. The role involves hands on service, maintenance, and commissioning of Trend (IQ2-IQ5) BMS systems, with opportunities to expand into Distech and Tridium platforms. You'll cover client sites in London, working on a variety of projects to ensure systems are performing optimally. Strong communication skills, independent fault finding capability, and a full UK driving licence are essential APPLY NOW! You must have Right To Work in the UK - No sponsorship available.
Jan 13, 2026
Full time
We're supporting a specialist building services provider looking to add a BMS Service and Small Works Engineer to their London-based team. The role involves hands on service, maintenance, and commissioning of Trend (IQ2-IQ5) BMS systems, with opportunities to expand into Distech and Tridium platforms. You'll cover client sites in London, working on a variety of projects to ensure systems are performing optimally. Strong communication skills, independent fault finding capability, and a full UK driving licence are essential APPLY NOW! You must have Right To Work in the UK - No sponsorship available.
Amida Consulting Solutions Ltd
Trafford Park, Manchester
Project Engineer Manchester Sector Experience: Fire Safety Solutions Installation Salary: up to £55K The Client They are a leading provider of innovative fire safety solutions, specializing in the design, installation, and maintenance of advanced fire detection and suppression systems. With a commitment to safeguarding lives and property, the company delivers tailored, high-quality services across various sectors, ensuring compliance with stringent safety standards. Their expert team leverages cutting-edge technology to offer reliable, efficient, and discreet fire protection solutions that blend seamlessly into any environment. Please consider this role if you are currently a Project Engineer, Project Manager, Contract Engineer, or Contracts Manager Responsibilities • Site surveys • Procurement of labour, equipment and fabrication • Liaising with clients, consultants, suppliers and site managers/supervisors • In partnership with your Project Manager, be involved in the cost control of contracts/projects • Keep records of installation progress and monitor against program of rewards • Keep up to date site records, including diary of all site operatives working on your projects • Maintain compliance on site with issued and approved method statements and risk assessments • Assist with testing and commissioning Essential Skills • CSCS card • Background in commercial sprinkler contracts, wet riser systems and dry riser systems • Strong understanding of Microsoft Office and similar project management software Desirable • Competitive salary • Understanding of Sprinkler related standards BS EN12845, LPC Rules & BS9990 • LPCB Design qualification(s) • SSSTS or SMSTS • NVQ level 3 or above in site management/project management • Understanding of procurement and cost control • A can-do hands-on attitude • Excellent customer service skills, with a friendly approach • Excellent verbal communication skills • Ability to multitask • Willingness to learn and develop • Reliability Please consider this role if you are currently a Project Engineer, Contract Engineer, or Contracts Manager For information on the role please call Giles Churchill Director - Fire at Amida Solutions on (phone number removed). I am available to book calls in from 8am to 8pm Mon to Fri & Weekends.
Jan 13, 2026
Full time
Project Engineer Manchester Sector Experience: Fire Safety Solutions Installation Salary: up to £55K The Client They are a leading provider of innovative fire safety solutions, specializing in the design, installation, and maintenance of advanced fire detection and suppression systems. With a commitment to safeguarding lives and property, the company delivers tailored, high-quality services across various sectors, ensuring compliance with stringent safety standards. Their expert team leverages cutting-edge technology to offer reliable, efficient, and discreet fire protection solutions that blend seamlessly into any environment. Please consider this role if you are currently a Project Engineer, Project Manager, Contract Engineer, or Contracts Manager Responsibilities • Site surveys • Procurement of labour, equipment and fabrication • Liaising with clients, consultants, suppliers and site managers/supervisors • In partnership with your Project Manager, be involved in the cost control of contracts/projects • Keep records of installation progress and monitor against program of rewards • Keep up to date site records, including diary of all site operatives working on your projects • Maintain compliance on site with issued and approved method statements and risk assessments • Assist with testing and commissioning Essential Skills • CSCS card • Background in commercial sprinkler contracts, wet riser systems and dry riser systems • Strong understanding of Microsoft Office and similar project management software Desirable • Competitive salary • Understanding of Sprinkler related standards BS EN12845, LPC Rules & BS9990 • LPCB Design qualification(s) • SSSTS or SMSTS • NVQ level 3 or above in site management/project management • Understanding of procurement and cost control • A can-do hands-on attitude • Excellent customer service skills, with a friendly approach • Excellent verbal communication skills • Ability to multitask • Willingness to learn and develop • Reliability Please consider this role if you are currently a Project Engineer, Contract Engineer, or Contracts Manager For information on the role please call Giles Churchill Director - Fire at Amida Solutions on (phone number removed). I am available to book calls in from 8am to 8pm Mon to Fri & Weekends.
Job Description: Electrical & Controls Technician -Mars Petcare Melton Mowbray £51,900- £56,000 (including shift allowances, DOE) + £2,000 Welcome bonus, Performance Bonus & Exceptional Benefits Shift pattern 12 Hrs - 7-7, 2 days, 2 nights, 4 off Why Join Us? At Melton, we're at the forefront of innovation in high-speed food processing, and we're searching for a talented Electrical & Controls Technician to join our team. This isn't just another job - it's your chance to make an impact, grow your expertise, and work with cutting-edge technology in a fast-paced, dynamic environment. Cutting-Edge Tech: Work with advanced systems like ABB/Kuka robotics, Allen Bradley PLCs, and predictive maintenance tools. Supportive Culture: Be part of a team that values innovation, continuous improvement, and collaboration. The Role We have an opportunity for an Electrical & Controls Technician to join and be responsible for the efficient, safe, and reliable operating condition of complex process and high-speed food processing equipment. The role will mainly focus on providing equipment troubleshooting and breakdown maintenance. As troubleshooting requirements are accomplished, the technician will change focus toward preventive maintenance activities. Systematically repair, adjust, and maintain processing, filling, conveying, and packaging machinery using established maintenance reliability practices, consistent observation, repair, and follow-up of operational effectiveness. Other duties include participating in continuous improvement teams, working on new project activities and continuous training. Shift Pattern - 12 Hours • 2 Days: 7am-7pm • 2 Nights: 7pm-7am and then repeat. What's in it for you? Competitive salary £51,900- £56,000 (including shift allowances, DOE) £2,000 welcome bonus paid in your 1st weeks salary Hot food restaurant on site Career growth opportunities with structured development & Mars University Private healthcare + equal parental leave Generous pension (up to 9% contribution) Life assurance (4x salary) EV salary sacrifice scheme Gym membership & wellbeing support Annual leave starting at 24 days, rising to 32 with service Free parking on site What We're Looking For Practical electrical engineering skills gained through HNC/HND (NVQ Level 4 apprenticeship or equivalent) and BS7671, or comparable hands-on experience in a technical field. Understanding of precision instrumentation-including repair and calibration-or experience with similar technical equipment. Mindset: Strong problem-solving abilities, curiosity, and a drive to improve processes and efficiency. Ability to adapt to various electrical power supplies and control systems, with a willingness to learn new technologies and approaches to equipment maintenance and troubleshooting. Experience in troubleshooting and maintaining automated or electromechanical machinery, or a background in related fields such as industrial maintenance, robotics, or process engineering, with exposure to automation concepts. Key Responsibilities Maintain, troubleshoot, test, and modify automated and electromechanical equipment, applying transferable skills from related technical roles. Apply engineering principles-drawing on both mechanical and electrical knowledge-to resolve production issues and enhance efficiency and reliability. Develop, track, and communicate maintenance metrics to identify, reduce, and eliminate recurring equipment issues, contributing to improved system reliability. Participate in continuous improvement initiatives (such as Lean Manufacturing or Kaizen), bringing fresh perspectives from previous roles or industries. Conduct Root Cause Failure Analysis on major breakdowns and recurring problems, using analytical skills and experience from any technical problem-solving environment. What You Can Expect from Mars Work alongside 130,000+ Associates worldwide guided by our Five Principles Be part of a purpose-driven company shaping "the world we want tomorrow" Access world-class training & development from day one Join a company with an industry-leading salary and benefits package
Jan 13, 2026
Full time
Job Description: Electrical & Controls Technician -Mars Petcare Melton Mowbray £51,900- £56,000 (including shift allowances, DOE) + £2,000 Welcome bonus, Performance Bonus & Exceptional Benefits Shift pattern 12 Hrs - 7-7, 2 days, 2 nights, 4 off Why Join Us? At Melton, we're at the forefront of innovation in high-speed food processing, and we're searching for a talented Electrical & Controls Technician to join our team. This isn't just another job - it's your chance to make an impact, grow your expertise, and work with cutting-edge technology in a fast-paced, dynamic environment. Cutting-Edge Tech: Work with advanced systems like ABB/Kuka robotics, Allen Bradley PLCs, and predictive maintenance tools. Supportive Culture: Be part of a team that values innovation, continuous improvement, and collaboration. The Role We have an opportunity for an Electrical & Controls Technician to join and be responsible for the efficient, safe, and reliable operating condition of complex process and high-speed food processing equipment. The role will mainly focus on providing equipment troubleshooting and breakdown maintenance. As troubleshooting requirements are accomplished, the technician will change focus toward preventive maintenance activities. Systematically repair, adjust, and maintain processing, filling, conveying, and packaging machinery using established maintenance reliability practices, consistent observation, repair, and follow-up of operational effectiveness. Other duties include participating in continuous improvement teams, working on new project activities and continuous training. Shift Pattern - 12 Hours • 2 Days: 7am-7pm • 2 Nights: 7pm-7am and then repeat. What's in it for you? Competitive salary £51,900- £56,000 (including shift allowances, DOE) £2,000 welcome bonus paid in your 1st weeks salary Hot food restaurant on site Career growth opportunities with structured development & Mars University Private healthcare + equal parental leave Generous pension (up to 9% contribution) Life assurance (4x salary) EV salary sacrifice scheme Gym membership & wellbeing support Annual leave starting at 24 days, rising to 32 with service Free parking on site What We're Looking For Practical electrical engineering skills gained through HNC/HND (NVQ Level 4 apprenticeship or equivalent) and BS7671, or comparable hands-on experience in a technical field. Understanding of precision instrumentation-including repair and calibration-or experience with similar technical equipment. Mindset: Strong problem-solving abilities, curiosity, and a drive to improve processes and efficiency. Ability to adapt to various electrical power supplies and control systems, with a willingness to learn new technologies and approaches to equipment maintenance and troubleshooting. Experience in troubleshooting and maintaining automated or electromechanical machinery, or a background in related fields such as industrial maintenance, robotics, or process engineering, with exposure to automation concepts. Key Responsibilities Maintain, troubleshoot, test, and modify automated and electromechanical equipment, applying transferable skills from related technical roles. Apply engineering principles-drawing on both mechanical and electrical knowledge-to resolve production issues and enhance efficiency and reliability. Develop, track, and communicate maintenance metrics to identify, reduce, and eliminate recurring equipment issues, contributing to improved system reliability. Participate in continuous improvement initiatives (such as Lean Manufacturing or Kaizen), bringing fresh perspectives from previous roles or industries. Conduct Root Cause Failure Analysis on major breakdowns and recurring problems, using analytical skills and experience from any technical problem-solving environment. What You Can Expect from Mars Work alongside 130,000+ Associates worldwide guided by our Five Principles Be part of a purpose-driven company shaping "the world we want tomorrow" Access world-class training & development from day one Join a company with an industry-leading salary and benefits package
