We are recruiting for Racking Technicians for a leading IT service provider based on site in Hatfield. We are recruiting for Racking Technicians for a leading IT service provider based on site in Hatfield. This is a hands-on role involving the installation of IT equipment into customer racks, including servers, storage and networking equipment. You'll be responsible for racking and stacking hardware, fitting and dressing cabling, applying asset labels, and preparing integrated solutions for shipment. The role involves regular manual handling, use of lifting equipment, and working to tight customer deadlines. Key Responsibilities Rack and stack IT equipment into customer racks and cabinets. Install, route and secure power and data cabling. Read and follow rack elevation diagrams and build documentation. Apply asset and customer labels accurately. Carry out basic equipment checks and inspections. Move and position equipment safely using approved handling methods. Prepare completed rack solutions for shipment. Maintain accurate installation and asset records. Follow all health & safety and manual handling procedures. Essential Requirements Proven rack and stack experience. Experience installing IT hardware into racks and cabinets. Experience working with cabling. Ability to read and follow rack elevation diagrams. Comfortable lifting and moving IT equipment. Strong attention to detail. Ability to work to deadlines in a fast-paced environment. Good communication and teamworking skills. Desirable Data centre experience. Experience within a systems integration or technical services environment. Familiarity with servers, storage or networking equipment. This is an umbrella contract, the role is Inside IR35.
Aug 18, 2026
Contractor
We are recruiting for Racking Technicians for a leading IT service provider based on site in Hatfield. We are recruiting for Racking Technicians for a leading IT service provider based on site in Hatfield. This is a hands-on role involving the installation of IT equipment into customer racks, including servers, storage and networking equipment. You'll be responsible for racking and stacking hardware, fitting and dressing cabling, applying asset labels, and preparing integrated solutions for shipment. The role involves regular manual handling, use of lifting equipment, and working to tight customer deadlines. Key Responsibilities Rack and stack IT equipment into customer racks and cabinets. Install, route and secure power and data cabling. Read and follow rack elevation diagrams and build documentation. Apply asset and customer labels accurately. Carry out basic equipment checks and inspections. Move and position equipment safely using approved handling methods. Prepare completed rack solutions for shipment. Maintain accurate installation and asset records. Follow all health & safety and manual handling procedures. Essential Requirements Proven rack and stack experience. Experience installing IT hardware into racks and cabinets. Experience working with cabling. Ability to read and follow rack elevation diagrams. Comfortable lifting and moving IT equipment. Strong attention to detail. Ability to work to deadlines in a fast-paced environment. Good communication and teamworking skills. Desirable Data centre experience. Experience within a systems integration or technical services environment. Familiarity with servers, storage or networking equipment. This is an umbrella contract, the role is Inside IR35.
About the Company At IMSERV, we're proud to be one of the UK's leading energy data and metering specialists. We deliver award-winning services to customers across the country, providing specialist metering technology for electricity, gas and water, alongside highly accurate energy data collection services. About the Role The purpose of the role is to provide support to the Field Team in relation to supplying equipment and tools as required. Responsibilities Ordering niche equipment and overseeing uniform distribution. Adding Technicians onto relevant systems e.g. (SAM/MOP/FUSE etc) Oversee off-boarding procedures (Van, Systems, Kit build, restock) Monitoring incoming e mails specifically Stock and FS inboxes, as well as incoming phone calls Raising Purchase Orders Undertake RICO Dispatch and Order booking and all relevant administration Carry out PAT Testing Undertake DSLAM Keys, Water Keys and Calibration Management Undertake Ringo Administration Undertake Ladder Inspections and Hire Requests Post Room duties Recording Lost Days Creating and Modifying SAM Orders Dealing with BASOL Enquiries Process OBASS Access Requests What you'll need Proven IT Skills in Microsoft Office and ability to work with multiple IT Systems Well organised and ability to meet deadlines and agreed SLA's Customer focused; can identify & respond to customer's need Willing to take ownership for issue resolution. Flexible, willing & able to cope with change in a pressurised environment Can manage own time to meet daily requirements Ability to analyse, understand and interpret large amounts of data Benefits 28 days' holiday plus Bank Holidays Buy & sell annual leave scheme Up to a 10% bonus Enhanced salary sacrifice pension Life assurance (up to 6x salary ) Simply Health plan (with upgrade options) Car salary sacrifice scheme ( Length of service and T&Cs apply) Equal Opportunity Statement At IMSERV, we're committed to building a team where everyone feels valued, respected and able to do their best work. We welcome applications from people of all backgrounds, experiences and communities. A diverse team brings fresh perspectives, strengthens collaboration and helps us deliver the best possible service to our customers. If you're interested in the role but don't meet every single requirement, we'd still encourage you to apply. (Please note that we reserve the right to close this position before the expiry date.)
Aug 18, 2026
Full time
About the Company At IMSERV, we're proud to be one of the UK's leading energy data and metering specialists. We deliver award-winning services to customers across the country, providing specialist metering technology for electricity, gas and water, alongside highly accurate energy data collection services. About the Role The purpose of the role is to provide support to the Field Team in relation to supplying equipment and tools as required. Responsibilities Ordering niche equipment and overseeing uniform distribution. Adding Technicians onto relevant systems e.g. (SAM/MOP/FUSE etc) Oversee off-boarding procedures (Van, Systems, Kit build, restock) Monitoring incoming e mails specifically Stock and FS inboxes, as well as incoming phone calls Raising Purchase Orders Undertake RICO Dispatch and Order booking and all relevant administration Carry out PAT Testing Undertake DSLAM Keys, Water Keys and Calibration Management Undertake Ringo Administration Undertake Ladder Inspections and Hire Requests Post Room duties Recording Lost Days Creating and Modifying SAM Orders Dealing with BASOL Enquiries Process OBASS Access Requests What you'll need Proven IT Skills in Microsoft Office and ability to work with multiple IT Systems Well organised and ability to meet deadlines and agreed SLA's Customer focused; can identify & respond to customer's need Willing to take ownership for issue resolution. Flexible, willing & able to cope with change in a pressurised environment Can manage own time to meet daily requirements Ability to analyse, understand and interpret large amounts of data Benefits 28 days' holiday plus Bank Holidays Buy & sell annual leave scheme Up to a 10% bonus Enhanced salary sacrifice pension Life assurance (up to 6x salary ) Simply Health plan (with upgrade options) Car salary sacrifice scheme ( Length of service and T&Cs apply) Equal Opportunity Statement At IMSERV, we're committed to building a team where everyone feels valued, respected and able to do their best work. We welcome applications from people of all backgrounds, experiences and communities. A diverse team brings fresh perspectives, strengthens collaboration and helps us deliver the best possible service to our customers. If you're interested in the role but don't meet every single requirement, we'd still encourage you to apply. (Please note that we reserve the right to close this position before the expiry date.)
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 24th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Aug 18, 2026
Full time
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 24th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Role: Electronic Test Engineer Location: Fareham Duration: 6 months (likely extensions) Rate: 27.50/hour PAYE Holiday entitlement - 25 day per annum (accrued) + pension scheme Shift pattern: 2pm - 10:30pm Mon - Thurs and 11am to 4pm Friday Position Summary Elevate your standards and embrace precision perfected, every detail, every line, speaks with precision, a masterpiece of engineering excellence! If you're a Test Technician who's looking for a new opportunity working for a customer focused, growing organization that will offer training, development and career progression. Responsibilities The Ideal candidate must be motivated to learn and routinely practice excellent calibration techniques, you will need to complete work according to business instructions, specifications and procedure. You ideally will be competent in reading drawings, conducting a variety of verification tests and calibration on electronic and electromechanical equipment with the use of a range of common electronics measurement equipment and specialist type equipment such as Pressure controllers, and ideally possess skills around basic engineering competencies, fine assembly, calibration and test procedures. Qualifications The Electronic Test Technician will: Sets up and operates equipment to test/calibrate units/subassemblies as per instructions, specifications, and procedures. Perform troubleshooting and failure analysis of analogue and digital circuitry to component level Provide detailed written failure description with root cause analysis to production and engineering. Follow written and verbal instructions, adheres to all company guidelines, policies and procedures. Carry out production/repair/assembly work as required within multiple departments on this site. Maintain a safe and clean work environment and follows company safety policies. Skills, Knowledge & Abilities: Well-organized, detail-oriented, ability to multi-task, the ability to understand and follow specific instructions and procedures Ability to work independently and prioritize duties with minimal supervision, in order to meet deadlines Skilled in the use of electronic test equipment, hand tools, power tools and electric soldering. Ability to read circuit diagrams. Ability to analyse and determine methods and procedures Proficient Microsoft Windows software applications If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.
Aug 18, 2026
Contractor
Role: Electronic Test Engineer Location: Fareham Duration: 6 months (likely extensions) Rate: 27.50/hour PAYE Holiday entitlement - 25 day per annum (accrued) + pension scheme Shift pattern: 2pm - 10:30pm Mon - Thurs and 11am to 4pm Friday Position Summary Elevate your standards and embrace precision perfected, every detail, every line, speaks with precision, a masterpiece of engineering excellence! If you're a Test Technician who's looking for a new opportunity working for a customer focused, growing organization that will offer training, development and career progression. Responsibilities The Ideal candidate must be motivated to learn and routinely practice excellent calibration techniques, you will need to complete work according to business instructions, specifications and procedure. You ideally will be competent in reading drawings, conducting a variety of verification tests and calibration on electronic and electromechanical equipment with the use of a range of common electronics measurement equipment and specialist type equipment such as Pressure controllers, and ideally possess skills around basic engineering competencies, fine assembly, calibration and test procedures. Qualifications The Electronic Test Technician will: Sets up and operates equipment to test/calibrate units/subassemblies as per instructions, specifications, and procedures. Perform troubleshooting and failure analysis of analogue and digital circuitry to component level Provide detailed written failure description with root cause analysis to production and engineering. Follow written and verbal instructions, adheres to all company guidelines, policies and procedures. Carry out production/repair/assembly work as required within multiple departments on this site. Maintain a safe and clean work environment and follows company safety policies. Skills, Knowledge & Abilities: Well-organized, detail-oriented, ability to multi-task, the ability to understand and follow specific instructions and procedures Ability to work independently and prioritize duties with minimal supervision, in order to meet deadlines Skilled in the use of electronic test equipment, hand tools, power tools and electric soldering. Ability to read circuit diagrams. Ability to analyse and determine methods and procedures Proficient Microsoft Windows software applications If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.
At Randstad , we are delighted to partner with a leading provider in the water safety and treatment sector to recruit a highly skilled Senior Service Chemist . As an established recruitment partner, we are looking for a true technical authority-someone who doesn't just check water parameters, but understands the intricate chemistry behind closed systems, cooling towers, and steam boilers to protect client assets and ensure total compliance. Location: Field-Based, Regional & National Travel Department: Water Hygiene / Water Treatment Reporting to: Operations Manager (Water) Position Type: Full-Time This is a high-impact, technical lead position. You will oversee the chemical control, risk mitigation, and continuous improvement for a diverse portfolio of commercial, industrial, and public sector clients. Balancing hands-on technical analysis with strategic client advisory, you will act as the go-to expert for complex water regimes while mentoring the next generation of engineers and technicians on site. Key Responsibilities Undertake chemical analysis, system monitoring, and dosing adjustments for cooling towers, steam boilers, evaporative systems, and closed heating/chilled systems. Ensure all site operations strictly align with ACOP L8 and HSG274 guidance. Support the implementation of Legionella control measures, Written Schemes of Control, and meticulous site logbooks. Act as the technical lead for client accounts, delivering practical recommendations for system efficiency, chemical regimes, and remedial risk mitigation. Provide mentorship and technical guidance to Service Chemists and Technicians. Assist with RAMS development, complex problem escalation, tenders, and new client mobilisations. Requirements Degree or equivalent in Chemistry, Environmental Science, Chemical Engineering, or a related discipline. A minimum of 3-5 years' hands-on experience within water treatment and hygiene, specifically covering cooling towers, steam boilers, and closed loops. Deep knowledge of water chemistry (pH, conductivity, microbiological control), dosing regimes, and mechanisms of corrosion, scaling, and fouling. Methodical, highly analytical, and confident managing your own field schedule while building strong relationships with client FM teams. If you are ready to bring your chemical expertise to a role that offers true technical autonomy and leadership, Randstad wants to hear from you! Please apply with your updated CV Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Aug 18, 2026
Full time
At Randstad , we are delighted to partner with a leading provider in the water safety and treatment sector to recruit a highly skilled Senior Service Chemist . As an established recruitment partner, we are looking for a true technical authority-someone who doesn't just check water parameters, but understands the intricate chemistry behind closed systems, cooling towers, and steam boilers to protect client assets and ensure total compliance. Location: Field-Based, Regional & National Travel Department: Water Hygiene / Water Treatment Reporting to: Operations Manager (Water) Position Type: Full-Time This is a high-impact, technical lead position. You will oversee the chemical control, risk mitigation, and continuous improvement for a diverse portfolio of commercial, industrial, and public sector clients. Balancing hands-on technical analysis with strategic client advisory, you will act as the go-to expert for complex water regimes while mentoring the next generation of engineers and technicians on site. Key Responsibilities Undertake chemical analysis, system monitoring, and dosing adjustments for cooling towers, steam boilers, evaporative systems, and closed heating/chilled systems. Ensure all site operations strictly align with ACOP L8 and HSG274 guidance. Support the implementation of Legionella control measures, Written Schemes of Control, and meticulous site logbooks. Act as the technical lead for client accounts, delivering practical recommendations for system efficiency, chemical regimes, and remedial risk mitigation. Provide mentorship and technical guidance to Service Chemists and Technicians. Assist with RAMS development, complex problem escalation, tenders, and new client mobilisations. Requirements Degree or equivalent in Chemistry, Environmental Science, Chemical Engineering, or a related discipline. A minimum of 3-5 years' hands-on experience within water treatment and hygiene, specifically covering cooling towers, steam boilers, and closed loops. Deep knowledge of water chemistry (pH, conductivity, microbiological control), dosing regimes, and mechanisms of corrosion, scaling, and fouling. Methodical, highly analytical, and confident managing your own field schedule while building strong relationships with client FM teams. If you are ready to bring your chemical expertise to a role that offers true technical autonomy and leadership, Randstad wants to hear from you! Please apply with your updated CV Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
JOB LOCATION: Daventry, UK Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working. In this role, you'll pay close attention to our processes to help maintain our high standards, and you'll put in place upgrades to take that standard even higher. Key job responsibilities Proactive and preventative maintenance tasks on a wide range of site equipment Carry out reactive repairs and fault diagnosis in a live distribution warehouse Use the latest tools to maximise equipment effectiveness Uphold all health and safety policies and practices Support the development and progression of on-site apprentices Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - High school or equivalent diploma - NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - 4 years UK certified apprenticeship - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - SVQ Level 3 (or equivalent) in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Experience in automated conveyors systems and controls, electrical and electronic principles, preventative maintenance procedures, blueprint and schematic reading, industrial electrical, industrial controls, industrial electronics, Programmable Logic Control (PLC) programs, National Electrical Code (NEC), work order management - Experience using CMMS (Computerized Maintenance Management Systems) to plan proactive maintenance and record reactive tasks - Served a full Engineering indentured apprenticeship and/or qualified to a minimum NVQ Level 3 or equivalent in a relevant Engineering subject - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing - Preferred Qualifications PREFERRED QUALIFICATIONS - Associate's degree in Mechatronics or a related technical field - Experience in vendor management - Experience with robotic maintenance - Experience leading engineering teams as a mentor or tech lead - Experience working with material handling equipment (MHE) safety standards in accordance with OEM requirements - Experience in condition-based monitoring Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Aug 18, 2026
Full time
JOB LOCATION: Daventry, UK Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working. In this role, you'll pay close attention to our processes to help maintain our high standards, and you'll put in place upgrades to take that standard even higher. Key job responsibilities Proactive and preventative maintenance tasks on a wide range of site equipment Carry out reactive repairs and fault diagnosis in a live distribution warehouse Use the latest tools to maximise equipment effectiveness Uphold all health and safety policies and practices Support the development and progression of on-site apprentices Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - High school or equivalent diploma - NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - 4 years UK certified apprenticeship - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - SVQ Level 3 (or equivalent) in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Experience in automated conveyors systems and controls, electrical and electronic principles, preventative maintenance procedures, blueprint and schematic reading, industrial electrical, industrial controls, industrial electronics, Programmable Logic Control (PLC) programs, National Electrical Code (NEC), work order management - Experience using CMMS (Computerized Maintenance Management Systems) to plan proactive maintenance and record reactive tasks - Served a full Engineering indentured apprenticeship and/or qualified to a minimum NVQ Level 3 or equivalent in a relevant Engineering subject - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing - Preferred Qualifications PREFERRED QUALIFICATIONS - Associate's degree in Mechatronics or a related technical field - Experience in vendor management - Experience with robotic maintenance - Experience leading engineering teams as a mentor or tech lead - Experience working with material handling equipment (MHE) safety standards in accordance with OEM requirements - Experience in condition-based monitoring Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Dynamite Recruitment is working in partnership with a well established business. Following company growth, they are looking for a Junior Project Coordinator to join the team on a 12 month contract (maternity cover) IMMEDIATE START REQUIRED Salary: £25,800 Location: Eastleigh Hours: 8am-4pm or 9am-5pm (37.5hr per week / 12 month FTC) As an Junior Project Coordinator you will play a key role providing administrative support to Project Managers. This will include dealing with the initial enquiry, through to the completion of audit documentation ensuring that all projects are completed on time to budget Key Responsibilities: - Ensure all administrative tasks are completed to a high standard, including risk and method statements, service orders, and technician packs -Compile and organise all required documentation accurately, and assist with the processing of payment applications -Raise purchase orders, to ensure the appropriate resources and equipment are available to deliver and complete the projects on time -Process supplier orders in a timely manner to enable the Purchase Ledger team to make supplier payments on schedule -Manage customer complaints and queries efficiently, escalating issues to the relevant Project Manager and Head of Electrical/Mechanical to ensure timely resolution -Report and assist in the appropriate response to H&S issues and emergencies which occur or are escalated during project installation -Promote and ensure consistent compliance with all Company Policies, embedding best practices throughout daily operations This is a fantastic opportunity for anyone who has experience of working with coordination/operations/project managers APPLY now! or get in touch with Flo Elmes, on (phone number removed)
Aug 18, 2026
Contractor
Dynamite Recruitment is working in partnership with a well established business. Following company growth, they are looking for a Junior Project Coordinator to join the team on a 12 month contract (maternity cover) IMMEDIATE START REQUIRED Salary: £25,800 Location: Eastleigh Hours: 8am-4pm or 9am-5pm (37.5hr per week / 12 month FTC) As an Junior Project Coordinator you will play a key role providing administrative support to Project Managers. This will include dealing with the initial enquiry, through to the completion of audit documentation ensuring that all projects are completed on time to budget Key Responsibilities: - Ensure all administrative tasks are completed to a high standard, including risk and method statements, service orders, and technician packs -Compile and organise all required documentation accurately, and assist with the processing of payment applications -Raise purchase orders, to ensure the appropriate resources and equipment are available to deliver and complete the projects on time -Process supplier orders in a timely manner to enable the Purchase Ledger team to make supplier payments on schedule -Manage customer complaints and queries efficiently, escalating issues to the relevant Project Manager and Head of Electrical/Mechanical to ensure timely resolution -Report and assist in the appropriate response to H&S issues and emergencies which occur or are escalated during project installation -Promote and ensure consistent compliance with all Company Policies, embedding best practices throughout daily operations This is a fantastic opportunity for anyone who has experience of working with coordination/operations/project managers APPLY now! or get in touch with Flo Elmes, on (phone number removed)
MULTISKILLED BODYSHOP TECHNICIAN - PANEL, PAINT & MET / STRIP FIT Location: Oxford Salary: OTE £65,000+ (Basic Salary £50,000 - £57,000+ DOE) Job Type: Full-Time, Permanent Looking for a role where your full range of Bodyshop skills is recognised, rewarded, and properly valued? If you're a genuinely multi-skilled Bodyshop Technician with experience across Panel, Paint and MET / Strip Fit, this is an excellent opportunity to put your complete skill set to work. With an OTE of £65,000+ and a basic salary of £50,000 - £57,000+ DOE, you'll have the earning potential to match your experience while working in a professional accident repair environment. Working Monday to Friday for 42.5 hours per week, you'll benefit from a consistent working pattern while having the opportunity to take on varied repair work. If you're tired of being restricted to one discipline and want a role where your broader technical abilities are genuinely useful, this could be the ideal next step. WHAT'S IN IT FOR YOU? OTE of £65,000+ Basic Salary of £50,000 - £57,000+ DOE Monday to Friday working pattern 42.5 hours per week Full-time, permanent employment Varied Panel, Paint and MET / Strip Fit workload Professional Bodyshop working environment Opportunity to utilise and develop multiple technical skills THE ROLE As a Multiskilled Bodyshop Technician, you'll work across Panel, Paint and MET / Strip Fit operations, helping to complete accident repairs efficiently while maintaining excellent standards of workmanship. Key responsibilities include: Carrying out panel repairs, including repairing, replacing, and refitting damaged body panels. Preparing and refinishing vehicle panels, including sanding, masking, priming, colour matching, and paint application. Carrying out MET / Strip Fit duties, including removing and refitting mechanical, electrical, and trim components. Assessing vehicle damage and selecting appropriate repair methods across multiple disciplines. Working closely with other technicians and workshop colleagues to ensure vehicles progress efficiently through the repair process. Carrying out quality checks to ensure completed repairs meet required standards. Managing allocated work effectively to meet agreed timescales and productivity expectations. Maintaining tools, equipment, and the workshop area in a safe and professional condition. ABOUT YOU This role would suit an experienced Multiskilled Bodyshop Technician / Panel Beater / Paint Sprayer / MET Technician / Strip & Fit Technician / Body Repair Technician who can confidently work across multiple disciplines. You'll ideally have: Proven experience within a professional bodyshop or accident repair environment. Recognised qualification (NVQ / IMI / City & Guilds or equivalent). ATA accreditation desirable but not essential. Strong practical experience across Panel, Paint and MET / Strip Fit. Good knowledge of modern vehicle repair and refinishing techniques. Excellent attention to detail and pride in delivering high-quality workmanship. The ability to work independently across different repair disciplines. Strong organisation and time management skills. A full UK driving licence. APPLY TODAY This is an excellent opportunity for a genuinely multi-skilled Bodyshop Technician looking to maximise their earning potential while using the full range of their technical abilities. With an OTE of £65,000+, a strong basic salary, and a consistent Monday to Friday working pattern, this is a role offering both financial reward and long-term career potential. If you're ready for your next challenge in Oxford and want a position where being multi-skilled is a genuine advantage, we'd love to hear from you. Apply today for immediate consideration. Contact Chris at AutoSkills UK and quote job number 54531.
Aug 18, 2026
Full time
MULTISKILLED BODYSHOP TECHNICIAN - PANEL, PAINT & MET / STRIP FIT Location: Oxford Salary: OTE £65,000+ (Basic Salary £50,000 - £57,000+ DOE) Job Type: Full-Time, Permanent Looking for a role where your full range of Bodyshop skills is recognised, rewarded, and properly valued? If you're a genuinely multi-skilled Bodyshop Technician with experience across Panel, Paint and MET / Strip Fit, this is an excellent opportunity to put your complete skill set to work. With an OTE of £65,000+ and a basic salary of £50,000 - £57,000+ DOE, you'll have the earning potential to match your experience while working in a professional accident repair environment. Working Monday to Friday for 42.5 hours per week, you'll benefit from a consistent working pattern while having the opportunity to take on varied repair work. If you're tired of being restricted to one discipline and want a role where your broader technical abilities are genuinely useful, this could be the ideal next step. WHAT'S IN IT FOR YOU? OTE of £65,000+ Basic Salary of £50,000 - £57,000+ DOE Monday to Friday working pattern 42.5 hours per week Full-time, permanent employment Varied Panel, Paint and MET / Strip Fit workload Professional Bodyshop working environment Opportunity to utilise and develop multiple technical skills THE ROLE As a Multiskilled Bodyshop Technician, you'll work across Panel, Paint and MET / Strip Fit operations, helping to complete accident repairs efficiently while maintaining excellent standards of workmanship. Key responsibilities include: Carrying out panel repairs, including repairing, replacing, and refitting damaged body panels. Preparing and refinishing vehicle panels, including sanding, masking, priming, colour matching, and paint application. Carrying out MET / Strip Fit duties, including removing and refitting mechanical, electrical, and trim components. Assessing vehicle damage and selecting appropriate repair methods across multiple disciplines. Working closely with other technicians and workshop colleagues to ensure vehicles progress efficiently through the repair process. Carrying out quality checks to ensure completed repairs meet required standards. Managing allocated work effectively to meet agreed timescales and productivity expectations. Maintaining tools, equipment, and the workshop area in a safe and professional condition. ABOUT YOU This role would suit an experienced Multiskilled Bodyshop Technician / Panel Beater / Paint Sprayer / MET Technician / Strip & Fit Technician / Body Repair Technician who can confidently work across multiple disciplines. You'll ideally have: Proven experience within a professional bodyshop or accident repair environment. Recognised qualification (NVQ / IMI / City & Guilds or equivalent). ATA accreditation desirable but not essential. Strong practical experience across Panel, Paint and MET / Strip Fit. Good knowledge of modern vehicle repair and refinishing techniques. Excellent attention to detail and pride in delivering high-quality workmanship. The ability to work independently across different repair disciplines. Strong organisation and time management skills. A full UK driving licence. APPLY TODAY This is an excellent opportunity for a genuinely multi-skilled Bodyshop Technician looking to maximise their earning potential while using the full range of their technical abilities. With an OTE of £65,000+, a strong basic salary, and a consistent Monday to Friday working pattern, this is a role offering both financial reward and long-term career potential. If you're ready for your next challenge in Oxford and want a position where being multi-skilled is a genuine advantage, we'd love to hear from you. Apply today for immediate consideration. Contact Chris at AutoSkills UK and quote job number 54531.
JOB LOCATION: Daventry, UK Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working. In this role, you'll pay close attention to our processes to help maintain our high standards, and you'll put in place upgrades to take that standard even higher. Key job responsibilities - Demonstrate best practice on using equipment safely and monitor teams to ensure everyone follows the correct processes - Keep track of equipment performance through visual checks, condition-based monitoring, and preventative maintenance tasks and schedule additional servicing when required - Supervise technicians on shift to support their development and act as the first point of contact for Reliability Maintenance Engineers - Solve issues in equipment to reduce downtime for operations so they can process packages as quickly as possible - Support in finding ways to continually improve systems and standardise processes across the EU network A day in the life In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - High school or equivalent diploma - NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - 4 years UK certified apprenticeship - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - SVQ Level 3 (or equivalent) in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Experience in automated conveyors systems and controls, electrical and electronic principles, preventative maintenance procedures, blueprint and schematic reading, industrial electrical, industrial controls, industrial electronics, Programmable Logic Control (PLC) programs, National Electrical Code (NEC), work order management - Experience using CMMS (Computerized Maintenance Management Systems) to plan proactive maintenance and record reactive tasks - completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - Experience in engineering - Experience in electrical or mechanical engineering, or experience in project management - Experience in English-language communication skills, both written and verbal - Preferred Qualifications PREFERRED QUALIFICATIONS - Associate's degree in Mechatronics or a related technical field - Experience in vendor management - Experience with robotic maintenance - Experience leading engineering teams as a mentor or tech lead - Experience working with material handling equipment (MHE) safety standards in accordance with OEM requirements - Experience repairing material handling equipment (MHE), automated conveyor systems, and related mechanical/controls equipment - Experience in condition-based monitoring - Experience working with print and apply machines Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Aug 18, 2026
Full time
JOB LOCATION: Daventry, UK Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working. In this role, you'll pay close attention to our processes to help maintain our high standards, and you'll put in place upgrades to take that standard even higher. Key job responsibilities - Demonstrate best practice on using equipment safely and monitor teams to ensure everyone follows the correct processes - Keep track of equipment performance through visual checks, condition-based monitoring, and preventative maintenance tasks and schedule additional servicing when required - Supervise technicians on shift to support their development and act as the first point of contact for Reliability Maintenance Engineers - Solve issues in equipment to reduce downtime for operations so they can process packages as quickly as possible - Support in finding ways to continually improve systems and standardise processes across the EU network A day in the life In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - High school or equivalent diploma - NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - 4 years UK certified apprenticeship - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - SVQ Level 3 (or equivalent) in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Experience in automated conveyors systems and controls, electrical and electronic principles, preventative maintenance procedures, blueprint and schematic reading, industrial electrical, industrial controls, industrial electronics, Programmable Logic Control (PLC) programs, National Electrical Code (NEC), work order management - Experience using CMMS (Computerized Maintenance Management Systems) to plan proactive maintenance and record reactive tasks - completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - Experience in engineering - Experience in electrical or mechanical engineering, or experience in project management - Experience in English-language communication skills, both written and verbal - Preferred Qualifications PREFERRED QUALIFICATIONS - Associate's degree in Mechatronics or a related technical field - Experience in vendor management - Experience with robotic maintenance - Experience leading engineering teams as a mentor or tech lead - Experience working with material handling equipment (MHE) safety standards in accordance with OEM requirements - Experience repairing material handling equipment (MHE), automated conveyor systems, and related mechanical/controls equipment - Experience in condition-based monitoring - Experience working with print and apply machines Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Are you an experienced Quality Operations Technician? Do you have experience working within a GMP-regulated manufacturing environment and a strong understanding of quality inspections, audits and compliance? If so, this could be the role for you! We are partnered with a leading manufacturing business in Southampton who are looking to hire a Quality Operations Technician to support their Quality team. This role is vital for ensuring manufacturing operations, incoming components and products meet required quality, safety and GMP standards. You will work closely with Operations to identify issues, provide quality guidance and support continuous compliance across the plant. This role is offered on a contract basis for 12 months initially, working Mon-Fri 07:00-15:00. Key Responsibilities: Conduct product, process and document inspections and audits against quality, compliance and safety standards. Carry out daily GMP checks across manufacturing areas to ensure continued compliance. Inspect incoming components and third-party products against agreed specifications. Provide guidance to Operations teams on quality and operational procedures. Support and train Operations colleagues in basic in-process quality tests, including weight and torque checks. Identify, escalate and report out-of-specification products or processes. Support GMP, Data Integrity and other site-wide compliance programmes. Assist Operations with deviation management, issue resolution and troubleshooting activities. Conduct CAPA effectiveness checks as required. Work collaboratively with manufacturing teams to maintain high standards of quality and compliance. Qualifications: Bachelor's degree or equivalent relevant experience. Previous experience within a quality, manufacturing or production environment is desirable. Experience working within a GMP-regulated facility is preferred. Understanding of manufacturing quality standards, inspections and compliance processes. Experience conducting process audits would be advantageous. Ability to carry out sampling activities and accurately interpret written procedures and instructions. Comfortable using standard quality control equipment such as scales, viscometers, pH meters, torque testers and other inspection equipment. Strong attention to detail and good communication skills. Basic computer skills. Ability to work effectively as part of a team and stand for extended periods where required. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Aug 18, 2026
Contractor
Are you an experienced Quality Operations Technician? Do you have experience working within a GMP-regulated manufacturing environment and a strong understanding of quality inspections, audits and compliance? If so, this could be the role for you! We are partnered with a leading manufacturing business in Southampton who are looking to hire a Quality Operations Technician to support their Quality team. This role is vital for ensuring manufacturing operations, incoming components and products meet required quality, safety and GMP standards. You will work closely with Operations to identify issues, provide quality guidance and support continuous compliance across the plant. This role is offered on a contract basis for 12 months initially, working Mon-Fri 07:00-15:00. Key Responsibilities: Conduct product, process and document inspections and audits against quality, compliance and safety standards. Carry out daily GMP checks across manufacturing areas to ensure continued compliance. Inspect incoming components and third-party products against agreed specifications. Provide guidance to Operations teams on quality and operational procedures. Support and train Operations colleagues in basic in-process quality tests, including weight and torque checks. Identify, escalate and report out-of-specification products or processes. Support GMP, Data Integrity and other site-wide compliance programmes. Assist Operations with deviation management, issue resolution and troubleshooting activities. Conduct CAPA effectiveness checks as required. Work collaboratively with manufacturing teams to maintain high standards of quality and compliance. Qualifications: Bachelor's degree or equivalent relevant experience. Previous experience within a quality, manufacturing or production environment is desirable. Experience working within a GMP-regulated facility is preferred. Understanding of manufacturing quality standards, inspections and compliance processes. Experience conducting process audits would be advantageous. Ability to carry out sampling activities and accurately interpret written procedures and instructions. Comfortable using standard quality control equipment such as scales, viscometers, pH meters, torque testers and other inspection equipment. Strong attention to detail and good communication skills. Basic computer skills. Ability to work effectively as part of a team and stand for extended periods where required. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Panel Beater We are looking for a talented and efficient Panel Beater / Panel Technician to join this leading team in a purpose built Bodyshop. You will be repairing damaged vehicles in line with the manufacturers' specifications utilising modern equipment and techniques Responsibilities of a Panel Beater Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques repairing panel damage on a variety of vehicles to a very high standard Remove damaged panels, Panel replacement and JIG work Use welding equipment, hand tools, and power tools to reshape and fit panels. Requirements for Panel Beater The successful candidate will be experienced in Panel Beating, have an eye for detail and enjoy completing repairs and panel work to the highest quality and standards. You will be a team player, self-motivated with excellent communication skills. If this role is something that you are well suited to or you are looking for something similar within the Automotive industry, then please contact or email your CV to;
Aug 18, 2026
Full time
Panel Beater We are looking for a talented and efficient Panel Beater / Panel Technician to join this leading team in a purpose built Bodyshop. You will be repairing damaged vehicles in line with the manufacturers' specifications utilising modern equipment and techniques Responsibilities of a Panel Beater Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques repairing panel damage on a variety of vehicles to a very high standard Remove damaged panels, Panel replacement and JIG work Use welding equipment, hand tools, and power tools to reshape and fit panels. Requirements for Panel Beater The successful candidate will be experienced in Panel Beating, have an eye for detail and enjoy completing repairs and panel work to the highest quality and standards. You will be a team player, self-motivated with excellent communication skills. If this role is something that you are well suited to or you are looking for something similar within the Automotive industry, then please contact or email your CV to;
Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working. In this role, you'll pay close attention to our processes to help maintain our high standards, and you'll put in place upgrades to take that standard even higher. Key job responsibilities - Demonstrate best practice on using equipment safely and monitor teams to ensure everyone follows the correct processes - Keep track of equipment performance through visual checks, condition-based monitoring, and preventative maintenance tasks and schedule additional servicing when required - Supervise technicians on shift to support their development and act as the first point of contact for Reliability Maintenance Engineers - Solve issues in equipment to reduce downtime for operations so they can process packages as quickly as possible - Support in finding ways to continually improve systems and standardise processes across the EU network A day in the life In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Work flexible shifts including night shifts/weekends - Relevant experience in a technical leadership role - Relevant experience working in both electrical and mechanical disciplines - Relevant experience in automation or material handling equipment environments - Advanced proficiency in verbal and written English PREFERRED QUALIFICATIONS - Experience working in a multi-contractor and multi-site working environment - Understanding of PLC based controls systems and statutory compliance requirements - Experience using computerised maintenance management systems to plan proactive maintenance and record reactive tasks - A degree preferably in a technical discipline or operations Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Aug 18, 2026
Full time
Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working. In this role, you'll pay close attention to our processes to help maintain our high standards, and you'll put in place upgrades to take that standard even higher. Key job responsibilities - Demonstrate best practice on using equipment safely and monitor teams to ensure everyone follows the correct processes - Keep track of equipment performance through visual checks, condition-based monitoring, and preventative maintenance tasks and schedule additional servicing when required - Supervise technicians on shift to support their development and act as the first point of contact for Reliability Maintenance Engineers - Solve issues in equipment to reduce downtime for operations so they can process packages as quickly as possible - Support in finding ways to continually improve systems and standardise processes across the EU network A day in the life In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Work flexible shifts including night shifts/weekends - Relevant experience in a technical leadership role - Relevant experience working in both electrical and mechanical disciplines - Relevant experience in automation or material handling equipment environments - Advanced proficiency in verbal and written English PREFERRED QUALIFICATIONS - Experience working in a multi-contractor and multi-site working environment - Understanding of PLC based controls systems and statutory compliance requirements - Experience using computerised maintenance management systems to plan proactive maintenance and record reactive tasks - A degree preferably in a technical discipline or operations Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: Saab is expanding in the UK and we are now seeking a talented and highly motivated RF Inspection & Test Technician to support our radar and sensors activities at our Fareham office. Much of our current work is centred on the G1X radar, which is the newest radar in Saab's portfolio - a software defined radar with a regular capability update cycle post-delivery, as well as an established production line. As an Inspection & Test Technician you will work in the Production department as part of the Test & Inspection team. Duties will be (but not limited to) inspecting produced items and units and testing units and the G1X Radar. Whilst the role is based in Fareham there may be opportunities for trips to Sweden for training and knowledge transfer. Key responsibilities: Support Inspection & Test Team Leader by being proactive to achieve production goals Ensure any soldering and electrical looming is carried out to a high standard in line with Company standards and procedures. Test functionality of produced units and sub-assemblies Help and support others with training when possible, by passing on knowledge and skills. Understand and interpret electrical drawings. Follow documented processes and record results. Carry out any other duties as detailed by the team leader or Production Supervisor. Maintain personal ability in, and appropriate use of, all relevant IT (Information & Technology) and other systems required to adequately perform the role. Act ethically, with integrity and in the best interest of the business at all times. Maintain a professional and supportive relationship with team members and other departments in order to deliver business and delivery objectives or deadlines. Test radar systems, including conducting thorough inspections and performance evaluations to ensure they meet required specifications. Troubleshoot radar systems by identifying and resolving technical issues, performing diagnostic tests, and implementing corrective actions. Liaise with Swedish colleagues over Teams, email, or in person to collaborate on projects, share knowledge, and ensure effective communication and coordination across teams. Required Skills: Be familiar with use of standard test and measurement equipment used in either a communications, radar or electronic warfare systems environment. Enjoy working and developing in a team. Like cooperating with others but are capable of working individually as well. Good technical communication skills. Computer literate. Capable of good time management. During your employment you will handle tasks and materials that are classified as military secret and therefore you must have a UK or Swedish citizenship. Experienced in the use of multi-meters, Oscilloscopes, Spectrum and Network Analysers with a knowledge of both analogue and digital systems. Good knowledge of electrical and electronic components and principles. Have 3-5 years of minimum RF experience, with a proven track record of troubleshooting. Desired Skills: Capable of inspecting to IPC class 3 standard. Have a background in inspection, testing and measurement (3-5 years minimum). As a person you are positive, social, result oriented and a team player. Proficiency in documenting procedures, findings, and recommendations. Capacity to develop creative solutions to unique challenges. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Aug 17, 2026
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: Saab is expanding in the UK and we are now seeking a talented and highly motivated RF Inspection & Test Technician to support our radar and sensors activities at our Fareham office. Much of our current work is centred on the G1X radar, which is the newest radar in Saab's portfolio - a software defined radar with a regular capability update cycle post-delivery, as well as an established production line. As an Inspection & Test Technician you will work in the Production department as part of the Test & Inspection team. Duties will be (but not limited to) inspecting produced items and units and testing units and the G1X Radar. Whilst the role is based in Fareham there may be opportunities for trips to Sweden for training and knowledge transfer. Key responsibilities: Support Inspection & Test Team Leader by being proactive to achieve production goals Ensure any soldering and electrical looming is carried out to a high standard in line with Company standards and procedures. Test functionality of produced units and sub-assemblies Help and support others with training when possible, by passing on knowledge and skills. Understand and interpret electrical drawings. Follow documented processes and record results. Carry out any other duties as detailed by the team leader or Production Supervisor. Maintain personal ability in, and appropriate use of, all relevant IT (Information & Technology) and other systems required to adequately perform the role. Act ethically, with integrity and in the best interest of the business at all times. Maintain a professional and supportive relationship with team members and other departments in order to deliver business and delivery objectives or deadlines. Test radar systems, including conducting thorough inspections and performance evaluations to ensure they meet required specifications. Troubleshoot radar systems by identifying and resolving technical issues, performing diagnostic tests, and implementing corrective actions. Liaise with Swedish colleagues over Teams, email, or in person to collaborate on projects, share knowledge, and ensure effective communication and coordination across teams. Required Skills: Be familiar with use of standard test and measurement equipment used in either a communications, radar or electronic warfare systems environment. Enjoy working and developing in a team. Like cooperating with others but are capable of working individually as well. Good technical communication skills. Computer literate. Capable of good time management. During your employment you will handle tasks and materials that are classified as military secret and therefore you must have a UK or Swedish citizenship. Experienced in the use of multi-meters, Oscilloscopes, Spectrum and Network Analysers with a knowledge of both analogue and digital systems. Good knowledge of electrical and electronic components and principles. Have 3-5 years of minimum RF experience, with a proven track record of troubleshooting. Desired Skills: Capable of inspecting to IPC class 3 standard. Have a background in inspection, testing and measurement (3-5 years minimum). As a person you are positive, social, result oriented and a team player. Proficiency in documenting procedures, findings, and recommendations. Capacity to develop creative solutions to unique challenges. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
️ Soldering & Crimping Operative wanted in Stonehouse, Gloucester, paying £13.08 to £13.69 per hour, working Monday to Thursday 07:30am - 16:15pm and Friday 07:30am - 12:15pm. This is a Temp to Perm opportunity. Looking for your next manufacturing opportunity? We're recruiting experienced Soldering & Crimping Operatives to join a highly reputable electrical assembly business. Your Duties: Hand soldering components and assemblies to a high standard Machine and hand crimping of wires and electrical components Building wiring harnesses and cable assemblies Reading and interpreting customer drawings and specifications Following written work instructions accurately Inspecting finished products to ensure quality standards are met Maintaining high levels of workmanship and attention to detail Working efficiently as part of a busy production team Supporting continuous improvement and maintaining a clean working environment ️ Requirements: Previous experience within wiring harness, cable assembly, electrical assembly or a similar industry Strong soldering and/or machine or hand crimping experience Good manual dexterity and attention to detail Ability to read engineering drawings and follow written instructions A quality focused approach with pride in your work Reliable, motivated and able to work independently or as part of a team Successful completion of a practical trade test at interview stage What's In It For You? Temp to Perm opportunity after 12-13 weeks Competitive pay rate of £13.08 - £13.69 per hour depending on experience Early finish every Friday at 12:15pm No weekend working Weekly pay option Established business with an excellent reputation for quality Friendly and supportive team environment Dedicated consultant support throughout your assignment Immediate interviews available Get Started Today!Come and register with us: Pertemps Gloucester, Unit 4A, Elmbridge Court, Cheltenham Road East, Gloucester, GL3 1JZOpen: Monday-Friday, 08:00-17:00 Call us now on for more information Or register online and start work quickly!Build your future with Pertemps - apply today!
Aug 17, 2026
Full time
️ Soldering & Crimping Operative wanted in Stonehouse, Gloucester, paying £13.08 to £13.69 per hour, working Monday to Thursday 07:30am - 16:15pm and Friday 07:30am - 12:15pm. This is a Temp to Perm opportunity. Looking for your next manufacturing opportunity? We're recruiting experienced Soldering & Crimping Operatives to join a highly reputable electrical assembly business. Your Duties: Hand soldering components and assemblies to a high standard Machine and hand crimping of wires and electrical components Building wiring harnesses and cable assemblies Reading and interpreting customer drawings and specifications Following written work instructions accurately Inspecting finished products to ensure quality standards are met Maintaining high levels of workmanship and attention to detail Working efficiently as part of a busy production team Supporting continuous improvement and maintaining a clean working environment ️ Requirements: Previous experience within wiring harness, cable assembly, electrical assembly or a similar industry Strong soldering and/or machine or hand crimping experience Good manual dexterity and attention to detail Ability to read engineering drawings and follow written instructions A quality focused approach with pride in your work Reliable, motivated and able to work independently or as part of a team Successful completion of a practical trade test at interview stage What's In It For You? Temp to Perm opportunity after 12-13 weeks Competitive pay rate of £13.08 - £13.69 per hour depending on experience Early finish every Friday at 12:15pm No weekend working Weekly pay option Established business with an excellent reputation for quality Friendly and supportive team environment Dedicated consultant support throughout your assignment Immediate interviews available Get Started Today!Come and register with us: Pertemps Gloucester, Unit 4A, Elmbridge Court, Cheltenham Road East, Gloucester, GL3 1JZOpen: Monday-Friday, 08:00-17:00 Call us now on for more information Or register online and start work quickly!Build your future with Pertemps - apply today!
We are currently seeking a highly skilled Diagnostic Technician to join our client's dynamic team in Fareham, Hampshire. This role is ideal for a seasoned professional who thrives on complex fault diagnostics and has a passion for working on high-end, sports, and performance vehicles. The successful individual will possess extensive experience in electrical and mechanical diagnosis and be capable of taking full ownership of diagnostic tasks from start to finish. Benefits for the successful Diagnostic Technician: Competitive basic salary between £30,000 and £40,000 per annum Standard working hours Monday to Friday, 08:00 to 17:00, with a 30-minute lunch break and two 15-minute breaks 1-in-3 Saturday rota, working 09:00 to 13:00 Supportive environment with opportunities for career progression Opportunity to work on a diverse range of marques, including prestige and performance vehicles Duties of the Diagnostic Technician: Conduct detailed fault finding and electrical diagnosis on a wide range of vehicles Support the workshop team by providing expert diagnostic advice and assistance Take ownership of vehicles from diagnosis through to repair, ensuring high standards of quality Work on a variety of marques, including sports, prestige, and performance cars Assist and guide less experienced technicians to improve team skills Maintain organisation, communication, and safety standards within the workshop Requirements of the Diagnostic Technician: Proven experience as a Senior Technician, Lead Technician, or equivalent Strong diagnostic skills with a focus on electrical and mechanical systems Experience working on high-performance, prestige, or sports vehicles Confident working independently with minimal supervision Methodical, accurate, and quality-focused approach Ability to lead and support other workshop team members Reliable and professional attitude If you believe you meet these criteria and are eager to take the next step in your automotive career, we would be delighted to hear from you. Contact Kinga Csipetics, Automotive Recruitment Specialist at Perfect Placement covering Fareham and Hampshire, today to discover more about this fantastic Diagnostic Technician opportunity. Our team of Automotive Recruitment Consultants all share a passion for finding our jobseekers the best jobs in the Automotive Industry. So, if you are looking to improve your career and want to hear about more Diagnostic Technician Jobs in your local area, please contact us today.
Aug 17, 2026
Full time
We are currently seeking a highly skilled Diagnostic Technician to join our client's dynamic team in Fareham, Hampshire. This role is ideal for a seasoned professional who thrives on complex fault diagnostics and has a passion for working on high-end, sports, and performance vehicles. The successful individual will possess extensive experience in electrical and mechanical diagnosis and be capable of taking full ownership of diagnostic tasks from start to finish. Benefits for the successful Diagnostic Technician: Competitive basic salary between £30,000 and £40,000 per annum Standard working hours Monday to Friday, 08:00 to 17:00, with a 30-minute lunch break and two 15-minute breaks 1-in-3 Saturday rota, working 09:00 to 13:00 Supportive environment with opportunities for career progression Opportunity to work on a diverse range of marques, including prestige and performance vehicles Duties of the Diagnostic Technician: Conduct detailed fault finding and electrical diagnosis on a wide range of vehicles Support the workshop team by providing expert diagnostic advice and assistance Take ownership of vehicles from diagnosis through to repair, ensuring high standards of quality Work on a variety of marques, including sports, prestige, and performance cars Assist and guide less experienced technicians to improve team skills Maintain organisation, communication, and safety standards within the workshop Requirements of the Diagnostic Technician: Proven experience as a Senior Technician, Lead Technician, or equivalent Strong diagnostic skills with a focus on electrical and mechanical systems Experience working on high-performance, prestige, or sports vehicles Confident working independently with minimal supervision Methodical, accurate, and quality-focused approach Ability to lead and support other workshop team members Reliable and professional attitude If you believe you meet these criteria and are eager to take the next step in your automotive career, we would be delighted to hear from you. Contact Kinga Csipetics, Automotive Recruitment Specialist at Perfect Placement covering Fareham and Hampshire, today to discover more about this fantastic Diagnostic Technician opportunity. Our team of Automotive Recruitment Consultants all share a passion for finding our jobseekers the best jobs in the Automotive Industry. So, if you are looking to improve your career and want to hear about more Diagnostic Technician Jobs in your local area, please contact us today.
Mechanical Fitter (Metrology / OEM) £34,000 - £38,000 + In-House Training + International Travel + Progression + Annual Bonus + Enhanced Holidays + Company Benefits Bath Are you an experienced mechanical Technician, with knowledge of the aerospace industry or similar, looking to join a company who will provide you with exposure to advanced technologies and excellent training to develop your skillset? This company provide metrology and calibration solutions for precision engineering in the aerospace industry. They assemble and utilise their own bespoke equipment to precisely measure manufactured components for companies like Rolls Royce, GE Aerospace, NASA, and The MoD. On offer is the chance to become a vital asset to the business. The ideal candidate will have a strong background in mechanical engineering and electrical engineering, to be able to tackle fault finding, assembly and maintenance of the machines. You will be working in a team of skilled engineers, while undergoing on-the-job training for all of their bespoke equipment. This role would suit any mechanical fitter from the precision engineering/aerospace industry, looking to join a growing company who provide opportunities for career progression and performance bonuses. The role: Mechanical assembly of rotary tables and inspection systems Electrical wiring, integration, and basic fault finding during assembly Calibration of finished products to meet ISO and internal quality standards Conduct FAT tests and prepare equipment for dispatch Willingness to travel globally to install, commission, service, and calibrate systems at customer sites Diagnose and repair mechanical/electrical faults both in house and in the field The person: Experience in a mechanical technician role within the precision engineering industry NVQ level 3 in mechanical/electrical engineering or similar Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH26645a We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Aug 17, 2026
Full time
Mechanical Fitter (Metrology / OEM) £34,000 - £38,000 + In-House Training + International Travel + Progression + Annual Bonus + Enhanced Holidays + Company Benefits Bath Are you an experienced mechanical Technician, with knowledge of the aerospace industry or similar, looking to join a company who will provide you with exposure to advanced technologies and excellent training to develop your skillset? This company provide metrology and calibration solutions for precision engineering in the aerospace industry. They assemble and utilise their own bespoke equipment to precisely measure manufactured components for companies like Rolls Royce, GE Aerospace, NASA, and The MoD. On offer is the chance to become a vital asset to the business. The ideal candidate will have a strong background in mechanical engineering and electrical engineering, to be able to tackle fault finding, assembly and maintenance of the machines. You will be working in a team of skilled engineers, while undergoing on-the-job training for all of their bespoke equipment. This role would suit any mechanical fitter from the precision engineering/aerospace industry, looking to join a growing company who provide opportunities for career progression and performance bonuses. The role: Mechanical assembly of rotary tables and inspection systems Electrical wiring, integration, and basic fault finding during assembly Calibration of finished products to meet ISO and internal quality standards Conduct FAT tests and prepare equipment for dispatch Willingness to travel globally to install, commission, service, and calibrate systems at customer sites Diagnose and repair mechanical/electrical faults both in house and in the field The person: Experience in a mechanical technician role within the precision engineering industry NVQ level 3 in mechanical/electrical engineering or similar Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH26645a We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
We are seeking a qualified and experienced Vehicle Technician to join a reputable, family-owned business based in Petersfield. This opportunity offers a chance to work within a supportive environment, providing crucial vehicle maintenance and repair services in a role that promotes independence and technical excellence. Benefits of the Vehicle Technician: Competitive basic salary of 40,000 per annum 40 hours per week, Monday to Friday, 8am to 5pm Use of a company pool vehicle for work-related tasks Supportive team environment with a focus on quality and safety Long-term employment stability within a growing, local business Opportunities for professional development and skill enhancement Duties of the Vehicle Technician: Support the safe and efficient operation of workshop and yard activities Conduct annual vehicle services and routine inspections Attend and diagnose breakdowns, performing necessary repairs Replace and repair vehicle components to maintain optimal performance Maintain accurate and detailed service records Order parts and liaise with suppliers to ensure smooth repair workflows Assist with servicing and repairing plant equipment and attachments Support health and safety procedures, promoting safety awareness Work independently as the sole Vehicle Mechanic, managing workload efficiently Provide technical support and advice to colleagues and clients as required Requirements of the Vehicle Technician: NVQ Level 3 diploma in light vehicle repair or equivalent qualification Proven recent experience as a vehicle mechanic Strong diagnostic and fault-finding skills as the Vehicle Technician Full UK driving licence IT literacy with experience in digital data entry Highly attentive to detail, with meticulous working practices Good understanding of health, safety, and environmental standards Physically fit and adaptable to varying weather conditions Excellent communication skills with a team-oriented approach Self-motivated with the ability to work independently If you are passionate about vehicle maintenance and seek a role where your skills are valued and utilised, we invite you to apply for this Vehicle Mechanic position in Petersfield. Contact Liam Buffenbarger, Automotive Recruitment Specialist at Perfect Placement covering Petersfield and Hampshire, today to discover more about this fantastic Vehicle Technician opportunity. Our team of Automotive Recruitment Consultants all share a passion for finding our jobseekers the best jobs in the Automotive Industry. So, if you are looking to improve your career and want to hear about more Motor Trade jobs in your local area, please contact us today.
Aug 17, 2026
Full time
We are seeking a qualified and experienced Vehicle Technician to join a reputable, family-owned business based in Petersfield. This opportunity offers a chance to work within a supportive environment, providing crucial vehicle maintenance and repair services in a role that promotes independence and technical excellence. Benefits of the Vehicle Technician: Competitive basic salary of 40,000 per annum 40 hours per week, Monday to Friday, 8am to 5pm Use of a company pool vehicle for work-related tasks Supportive team environment with a focus on quality and safety Long-term employment stability within a growing, local business Opportunities for professional development and skill enhancement Duties of the Vehicle Technician: Support the safe and efficient operation of workshop and yard activities Conduct annual vehicle services and routine inspections Attend and diagnose breakdowns, performing necessary repairs Replace and repair vehicle components to maintain optimal performance Maintain accurate and detailed service records Order parts and liaise with suppliers to ensure smooth repair workflows Assist with servicing and repairing plant equipment and attachments Support health and safety procedures, promoting safety awareness Work independently as the sole Vehicle Mechanic, managing workload efficiently Provide technical support and advice to colleagues and clients as required Requirements of the Vehicle Technician: NVQ Level 3 diploma in light vehicle repair or equivalent qualification Proven recent experience as a vehicle mechanic Strong diagnostic and fault-finding skills as the Vehicle Technician Full UK driving licence IT literacy with experience in digital data entry Highly attentive to detail, with meticulous working practices Good understanding of health, safety, and environmental standards Physically fit and adaptable to varying weather conditions Excellent communication skills with a team-oriented approach Self-motivated with the ability to work independently If you are passionate about vehicle maintenance and seek a role where your skills are valued and utilised, we invite you to apply for this Vehicle Mechanic position in Petersfield. Contact Liam Buffenbarger, Automotive Recruitment Specialist at Perfect Placement covering Petersfield and Hampshire, today to discover more about this fantastic Vehicle Technician opportunity. Our team of Automotive Recruitment Consultants all share a passion for finding our jobseekers the best jobs in the Automotive Industry. So, if you are looking to improve your career and want to hear about more Motor Trade jobs in your local area, please contact us today.
Damp & Mould Technician Response Repairs Bedfordshire Temp to Perm- £31,000- 34,176 Build Recruitment provides specialist recruitment services, supplying quality candidates on a temporary or permanent basis to leading organisations throughout the built environment - from executive to operative level. With offices in London, Manchester and the Southwest, we specialise in Housing, Construction, Facilities Management, Property, Surveying, Health & Safety and Sales. We supply candidates from executive to operative level, and are currently working with a Housing Association, who are looking for a Damp & Mould Technician based in Bedfordshire. Day to Day Duties for a Damp & Mould Technician on the response team Carry out day-to-day damp and mould treatment works in occupied properties. Identify causes of damp, condensation, and mould growth. Clean, treat, and remove mould using approved methods and materials. Apply mould washes, sealants, and protective coatings as required. Carry out minor repairs including making good walls, ceilings, and affected surfaces. Improve ventilation where required, including fitting vents or extractor fans (where applicable). Work tidy and respectful in tenants homes, following health & safety procedures. Use PPE and COSHH-compliant products correctly at all times. Report any further issues, causes, or follow-on works to the office. Occasionally help other trades on small make-good jobs Benefits for Damp & Mould Technician: Van & fuel card provided Weekly pay every Friday Opportunity to go permanent after temp period Please apply or contact Tom at Build Recruitment for further details (phone number removed) We'll take the time to understand your career history and motivations for a new role. We'll also take references and may ask for proof of eligibility to work in the UK. We work with a wide variety of clients in the public and private sector, and we will work with you to identify clients in which your skills, experience and personality will fit. Once we submit you for a role you will receive support and regular communication throughout the interview process. From there our commitment to you is all about being your career partner. We'll identify suitable jobs, provide support, and career guidance and even provide regular salary benchmarking. The ideal candidate for this position would have experience as a damp and mould technician or damp operative or maintenance operative or multi skilled operative or multi trade operative or multi trader or handyman with experience in social housing or housing associations or domestic properties or council properties or MOD (Ministry of Defence).
Aug 17, 2026
Full time
Damp & Mould Technician Response Repairs Bedfordshire Temp to Perm- £31,000- 34,176 Build Recruitment provides specialist recruitment services, supplying quality candidates on a temporary or permanent basis to leading organisations throughout the built environment - from executive to operative level. With offices in London, Manchester and the Southwest, we specialise in Housing, Construction, Facilities Management, Property, Surveying, Health & Safety and Sales. We supply candidates from executive to operative level, and are currently working with a Housing Association, who are looking for a Damp & Mould Technician based in Bedfordshire. Day to Day Duties for a Damp & Mould Technician on the response team Carry out day-to-day damp and mould treatment works in occupied properties. Identify causes of damp, condensation, and mould growth. Clean, treat, and remove mould using approved methods and materials. Apply mould washes, sealants, and protective coatings as required. Carry out minor repairs including making good walls, ceilings, and affected surfaces. Improve ventilation where required, including fitting vents or extractor fans (where applicable). Work tidy and respectful in tenants homes, following health & safety procedures. Use PPE and COSHH-compliant products correctly at all times. Report any further issues, causes, or follow-on works to the office. Occasionally help other trades on small make-good jobs Benefits for Damp & Mould Technician: Van & fuel card provided Weekly pay every Friday Opportunity to go permanent after temp period Please apply or contact Tom at Build Recruitment for further details (phone number removed) We'll take the time to understand your career history and motivations for a new role. We'll also take references and may ask for proof of eligibility to work in the UK. We work with a wide variety of clients in the public and private sector, and we will work with you to identify clients in which your skills, experience and personality will fit. Once we submit you for a role you will receive support and regular communication throughout the interview process. From there our commitment to you is all about being your career partner. We'll identify suitable jobs, provide support, and career guidance and even provide regular salary benchmarking. The ideal candidate for this position would have experience as a damp and mould technician or damp operative or maintenance operative or multi skilled operative or multi trade operative or multi trader or handyman with experience in social housing or housing associations or domestic properties or council properties or MOD (Ministry of Defence).
About the opportunity Netcom Training's government-funded IT Support course is your shortcut to breaking into IT and launching a career in tech. Learn the essentials - hardware, networks, cloud computing, troubleshooting and more - in an interactive online format and earn a globally recognised CompTIA Tech+ certification . Course details Duration: 13 weeks Format: Online, practical workshops Schedule: Mon-Thur 6-9pm Start date: 17th August 2026 Spaces: Limited to 35 learners per cohort What you'll learn Setting up and maintaining secure networks Configuring and integrating desktop and mobile devices Applying cloud security and disaster recovery methods Understanding IT systems, legislation and business operations Potential roles IT Systems Administrator Technical Support Technician Entry Level IT Technician Helpdesk Analyst Additional benefits High-impact employability workshops Six months' access to online employability courses Ongoing career support Eligibility To apply, you must: Live in the West Midlands Be aged 19 or over Earn below the gross annual wage cap of £36,126 (West Midlands) Not currently be undertaking any other government-funded training Not be in the UK on a student, graduate, postgraduate or sponsorship visa, or as a dependent of someone who is Cost This is a free government funded course Spaces are limited, so apply today to secure your place on the 17th August cohort.
Aug 17, 2026
Full time
About the opportunity Netcom Training's government-funded IT Support course is your shortcut to breaking into IT and launching a career in tech. Learn the essentials - hardware, networks, cloud computing, troubleshooting and more - in an interactive online format and earn a globally recognised CompTIA Tech+ certification . Course details Duration: 13 weeks Format: Online, practical workshops Schedule: Mon-Thur 6-9pm Start date: 17th August 2026 Spaces: Limited to 35 learners per cohort What you'll learn Setting up and maintaining secure networks Configuring and integrating desktop and mobile devices Applying cloud security and disaster recovery methods Understanding IT systems, legislation and business operations Potential roles IT Systems Administrator Technical Support Technician Entry Level IT Technician Helpdesk Analyst Additional benefits High-impact employability workshops Six months' access to online employability courses Ongoing career support Eligibility To apply, you must: Live in the West Midlands Be aged 19 or over Earn below the gross annual wage cap of £36,126 (West Midlands) Not currently be undertaking any other government-funded training Not be in the UK on a student, graduate, postgraduate or sponsorship visa, or as a dependent of someone who is Cost This is a free government funded course Spaces are limited, so apply today to secure your place on the 17th August cohort.
Engineering Technician - Automation Location: Nottingham area Salary: 41,500 per annum Contract: Permanent Department: Customer Support Sector: Engineering / Automation / Intralogistics We are currently recruiting for an Engineering Technician to join a permanent team in the Nottingham area. This is an excellent opportunity for an engineer or technician with experience in machinery, maintenance, electrical systems or automation who enjoys fault finding, problem solving and working in a customer-focused engineering environment. You will be responsible for responding to reactive faults, carrying out preventative maintenance and supporting the engineering team to keep automated systems running efficiently and reliably. The Role As an Engineering Technician, you will respond promptly to equipment faults, diagnose and rectify issues where possible, and escalate unresolved problems to the appropriate engineering or technical support team. You will also support engineers and team leaders, identify recurring faults and contribute to improvements in equipment reliability and performance. Key Responsibilities Respond promptly to reactive faults and carry out preventative maintenance checks. Diagnose, investigate and rectify equipment faults where possible. Escalate unresolved or complex issues to the appropriate engineering team or external support function. Maintain automated warehouse and warehouse management systems to a high technical standard. Monitor equipment performance and minimise response times and operational disruption. Carry out equipment servicing in accordance with manufacturer recommendations and quality standards. Undertake repairs in line with manufacturer recommendations and industry best practice. Support technical cleaning of automated areas. Identify repeated faults and communicate findings and potential solutions to the engineering management team. Support continuous improvement and identify opportunities to improve equipment reliability. Work closely with colleagues, customers and other technical teams to resolve problems. Provide frontline customer support and communicate clearly regarding faults, issues and resolutions. Complete allocated duties in accordance with relevant site and engineering procedures. Maintain compliance with Health & Safety and company quality processes. About You The successful candidate will ideally have: Relevant experience in machinery, maintenance, electrical engineering or an automation environment . A minimum Level 2 Engineering qualification and/or significant relevant experience within an automation environment. Experience with fault finding and problem solving. An understanding of preventative maintenance / PPM schedules . Willingness and ability to work at height. Ability to work at height and climb vertical access ladders following appropriate training. A practical and methodical approach to diagnosing technical issues. Good organisational skills with the ability to prioritise and manage a varied workload. Strong communication and customer service skills. The ability to work independently as well as part of a wider engineering team. A proactive attitude towards continuous improvement. Good understanding of Health & Safety requirements. Good PC literacy. Desirable Experience Previous experience in an industrial, automated or materials handling environment . Electrical or mechanical qualifications. Electrical/mechanical fault finding and repair experience. Previous customer service experience. Understanding of Health & Safety regulations. Ability to read and understand mechanical, electrical and electronic technical manuals and drawings. Basic understanding of PLC equipment . Good level of physical fitness for the requirements of the role. Salary & Benefits 41,500 total annual salary including shift allowance Permanent position 25 days' annual leave Bank holidays Private Healthcare Permanent Health Insurance Company Sick Pay Pension with employer contribution Death in Service benefit What We're Looking For This role would suit an Engineering Technician, Maintenance Technician, Automation Technician, Electrical Technician, Mechanical Technician or Engineering Support Technician who enjoys working in a hands-on environment and has a strong interest in automation and fault finding. You will be customer-focused, safety-conscious and comfortable working in a fast-paced environment where responding quickly and effectively to technical issues is essential. How to Apply If you are an experienced Engineering Technician, Maintenance Technician, Automation Technician or similar looking for a permanent opportunity in the Nottingham area, we would like to hear from you. Please send your CV to: Luana Ferreira (url removed) (phone number removed) Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Aug 17, 2026
Full time
Engineering Technician - Automation Location: Nottingham area Salary: 41,500 per annum Contract: Permanent Department: Customer Support Sector: Engineering / Automation / Intralogistics We are currently recruiting for an Engineering Technician to join a permanent team in the Nottingham area. This is an excellent opportunity for an engineer or technician with experience in machinery, maintenance, electrical systems or automation who enjoys fault finding, problem solving and working in a customer-focused engineering environment. You will be responsible for responding to reactive faults, carrying out preventative maintenance and supporting the engineering team to keep automated systems running efficiently and reliably. The Role As an Engineering Technician, you will respond promptly to equipment faults, diagnose and rectify issues where possible, and escalate unresolved problems to the appropriate engineering or technical support team. You will also support engineers and team leaders, identify recurring faults and contribute to improvements in equipment reliability and performance. Key Responsibilities Respond promptly to reactive faults and carry out preventative maintenance checks. Diagnose, investigate and rectify equipment faults where possible. Escalate unresolved or complex issues to the appropriate engineering team or external support function. Maintain automated warehouse and warehouse management systems to a high technical standard. Monitor equipment performance and minimise response times and operational disruption. Carry out equipment servicing in accordance with manufacturer recommendations and quality standards. Undertake repairs in line with manufacturer recommendations and industry best practice. Support technical cleaning of automated areas. Identify repeated faults and communicate findings and potential solutions to the engineering management team. Support continuous improvement and identify opportunities to improve equipment reliability. Work closely with colleagues, customers and other technical teams to resolve problems. Provide frontline customer support and communicate clearly regarding faults, issues and resolutions. Complete allocated duties in accordance with relevant site and engineering procedures. Maintain compliance with Health & Safety and company quality processes. About You The successful candidate will ideally have: Relevant experience in machinery, maintenance, electrical engineering or an automation environment . A minimum Level 2 Engineering qualification and/or significant relevant experience within an automation environment. Experience with fault finding and problem solving. An understanding of preventative maintenance / PPM schedules . Willingness and ability to work at height. Ability to work at height and climb vertical access ladders following appropriate training. A practical and methodical approach to diagnosing technical issues. Good organisational skills with the ability to prioritise and manage a varied workload. Strong communication and customer service skills. The ability to work independently as well as part of a wider engineering team. A proactive attitude towards continuous improvement. Good understanding of Health & Safety requirements. Good PC literacy. Desirable Experience Previous experience in an industrial, automated or materials handling environment . Electrical or mechanical qualifications. Electrical/mechanical fault finding and repair experience. Previous customer service experience. Understanding of Health & Safety regulations. Ability to read and understand mechanical, electrical and electronic technical manuals and drawings. Basic understanding of PLC equipment . Good level of physical fitness for the requirements of the role. Salary & Benefits 41,500 total annual salary including shift allowance Permanent position 25 days' annual leave Bank holidays Private Healthcare Permanent Health Insurance Company Sick Pay Pension with employer contribution Death in Service benefit What We're Looking For This role would suit an Engineering Technician, Maintenance Technician, Automation Technician, Electrical Technician, Mechanical Technician or Engineering Support Technician who enjoys working in a hands-on environment and has a strong interest in automation and fault finding. You will be customer-focused, safety-conscious and comfortable working in a fast-paced environment where responding quickly and effectively to technical issues is essential. How to Apply If you are an experienced Engineering Technician, Maintenance Technician, Automation Technician or similar looking for a permanent opportunity in the Nottingham area, we would like to hear from you. Please send your CV to: Luana Ferreira (url removed) (phone number removed) Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
