Maintenance Manager The role offers a salary of £44,000 plus tronc (approximately £3,000-£4,000 additional). It operates on a 4 on, 4 off shift pattern and involves managing two shift engineers and a painter. Job Description Job Title: Maintenance Manager Department: Engineering Reports to: General Manager Responsible for: Shift Engineer This hotel delivers a personal, tactful and friendly service, anticipating guest need, creating a homely ambiance in a sophisticated environment to achieve an elegant and comfortable experience. Our 7 Hospitality Values • Entrepreneurship • Agility • Well-being • Competence • Rethinking luxury • Tailor-made • Emotion Job Overview To be responsible for all maintenance issues within the hotel, performing maintenance checks, and overseeing the engineering team to deliver an excellent guests' experience. To manage renovation projects, develop emergency programs and take on special projects as assigned. Objectives and Goals To maintain the hotel maintenance to the highest possible standards and ensure the hotel is fully operational with full statutory and legal compliance. To support effective communication across the business To support the business through targeted support for specific maintenance projects To drives business performance through proactive engineering efforts to limit costs and increase guest and employee satisfaction through effective communications and trainin Key Duties and Responsibilities Responsible for all maintenance issues within the hotel Manage budget, capital expenditures, preventative maintenance and energy conservation. Accountable for maintaining the building and grounds with particular attention towards safety, security and asset protection. Perform daily checks around the hotel Conduct lift emergency release procedures as required Diagnose, maintain, and repair mechanical equipment within the hotel Ensure good relationships are built with internal and external customers Maintenance of all hotel fixtures and fittings to ensure they are in safe condition and take action when any unsafe situations arise Develop, implement, and direct all emergency programs Develop, implement and manage energy conservation programs for the property to minimize expenses Coordinate renovation bidding, define the cost and scope of the project, and oversee the general contractor and subcontractors to ensure quality work is performed cost effectively Perform special projects and other responsibilities as assigned Responsible for the health and safety of the hotel To manage hotel's health and safety calendar To review risk assessments periodically as per health and safety regulations Ensure monthly safety inspections take place and employees are trained accordingly To work from maintenance fault log to ensure all bedrooms and meeting rooms are available to let daily ensuring close communication with both housekeeping and front of house manager. Implement and operate planned preventative maintenance scheme for the hotel To deliver projects in line with organisational need. To maintain all plant and machinery. To manage, schedule and complete project work in a timely and efficient manner. Control departmental costs through correct storage and distribution of supplies. To maintain heating, ventilating, air conditioning equipment in optimal operating condition by performing routine maintenance and repairs Ability to prevent costly machine breakdowns by reviewing equipment as needed Maintaining and updating information on the internal maintenance BMS Sourcing and managing suppliers and subcontractors Ensure that all maintenance contracts are up to date and cover all relevant machinery All repairs are logged and recorded to show due diligence Ensure machinery records are kept in order to not lose warranty cover Set up a help desk/job center to receive jobs, track jobs and close and record jobs and ensure this will be communicated with the engineers. Set up specialist contractors or M&E Maintenance contractor prior to opening for the lifts, boilers, chillers, BMS, CHP, water treatment, catering equipment, fire alarm and panel, fire suppression (hood) etc. People Development Develop a positive and direct relationship with all colleagues, HODS and external links To build and maintain an efficient team of employees, driving the team towards the objectives of the business. To recruit and select employees to the agreed staffing levels using cost effective recruitment methods. Ensure professional departmental induction is completed consistently and its effectiveness reviewed. Stimulate a positive 'learning' culture Develop a departmental calendar of all key training, identifying training needs and capability gaps within the team working with Human Resources for further training. Maintain and update training records, ensuring team and regularly developed and trained To manage all employees' performance in line with job descriptions, giving regular feedback and appraisals. To manage all disciplinary and grievance issues within the department in consultation with the Human Resources team Audit holiday and sickness administration to ensure consistency and accuracy Ensure all staff complete an exit interview Be pro-active in updating self and colleagues on industry knowledg Work with General Manager or other department heads on various special assignments and any other reasonable request Qualifications and Requirements Previous experience of facilities management or in a similar quality operation Advance knowledge of building management/engineering Qualification in an engineering field, preferably Mechanical engineering Knowledge of general building maintenance essential Certification in advanced health and safety, fire safety and food hygiene ideal Proven experience in managing a team Good knowledge of Microsoft Office, Opera,
Apr 02, 2026
Full time
Maintenance Manager The role offers a salary of £44,000 plus tronc (approximately £3,000-£4,000 additional). It operates on a 4 on, 4 off shift pattern and involves managing two shift engineers and a painter. Job Description Job Title: Maintenance Manager Department: Engineering Reports to: General Manager Responsible for: Shift Engineer This hotel delivers a personal, tactful and friendly service, anticipating guest need, creating a homely ambiance in a sophisticated environment to achieve an elegant and comfortable experience. Our 7 Hospitality Values • Entrepreneurship • Agility • Well-being • Competence • Rethinking luxury • Tailor-made • Emotion Job Overview To be responsible for all maintenance issues within the hotel, performing maintenance checks, and overseeing the engineering team to deliver an excellent guests' experience. To manage renovation projects, develop emergency programs and take on special projects as assigned. Objectives and Goals To maintain the hotel maintenance to the highest possible standards and ensure the hotel is fully operational with full statutory and legal compliance. To support effective communication across the business To support the business through targeted support for specific maintenance projects To drives business performance through proactive engineering efforts to limit costs and increase guest and employee satisfaction through effective communications and trainin Key Duties and Responsibilities Responsible for all maintenance issues within the hotel Manage budget, capital expenditures, preventative maintenance and energy conservation. Accountable for maintaining the building and grounds with particular attention towards safety, security and asset protection. Perform daily checks around the hotel Conduct lift emergency release procedures as required Diagnose, maintain, and repair mechanical equipment within the hotel Ensure good relationships are built with internal and external customers Maintenance of all hotel fixtures and fittings to ensure they are in safe condition and take action when any unsafe situations arise Develop, implement, and direct all emergency programs Develop, implement and manage energy conservation programs for the property to minimize expenses Coordinate renovation bidding, define the cost and scope of the project, and oversee the general contractor and subcontractors to ensure quality work is performed cost effectively Perform special projects and other responsibilities as assigned Responsible for the health and safety of the hotel To manage hotel's health and safety calendar To review risk assessments periodically as per health and safety regulations Ensure monthly safety inspections take place and employees are trained accordingly To work from maintenance fault log to ensure all bedrooms and meeting rooms are available to let daily ensuring close communication with both housekeeping and front of house manager. Implement and operate planned preventative maintenance scheme for the hotel To deliver projects in line with organisational need. To maintain all plant and machinery. To manage, schedule and complete project work in a timely and efficient manner. Control departmental costs through correct storage and distribution of supplies. To maintain heating, ventilating, air conditioning equipment in optimal operating condition by performing routine maintenance and repairs Ability to prevent costly machine breakdowns by reviewing equipment as needed Maintaining and updating information on the internal maintenance BMS Sourcing and managing suppliers and subcontractors Ensure that all maintenance contracts are up to date and cover all relevant machinery All repairs are logged and recorded to show due diligence Ensure machinery records are kept in order to not lose warranty cover Set up a help desk/job center to receive jobs, track jobs and close and record jobs and ensure this will be communicated with the engineers. Set up specialist contractors or M&E Maintenance contractor prior to opening for the lifts, boilers, chillers, BMS, CHP, water treatment, catering equipment, fire alarm and panel, fire suppression (hood) etc. People Development Develop a positive and direct relationship with all colleagues, HODS and external links To build and maintain an efficient team of employees, driving the team towards the objectives of the business. To recruit and select employees to the agreed staffing levels using cost effective recruitment methods. Ensure professional departmental induction is completed consistently and its effectiveness reviewed. Stimulate a positive 'learning' culture Develop a departmental calendar of all key training, identifying training needs and capability gaps within the team working with Human Resources for further training. Maintain and update training records, ensuring team and regularly developed and trained To manage all employees' performance in line with job descriptions, giving regular feedback and appraisals. To manage all disciplinary and grievance issues within the department in consultation with the Human Resources team Audit holiday and sickness administration to ensure consistency and accuracy Ensure all staff complete an exit interview Be pro-active in updating self and colleagues on industry knowledg Work with General Manager or other department heads on various special assignments and any other reasonable request Qualifications and Requirements Previous experience of facilities management or in a similar quality operation Advance knowledge of building management/engineering Qualification in an engineering field, preferably Mechanical engineering Knowledge of general building maintenance essential Certification in advanced health and safety, fire safety and food hygiene ideal Proven experience in managing a team Good knowledge of Microsoft Office, Opera,
IT Service Delivery Manager Position: Senior Service Manager (Internal Name) Location: Ringwood, Hampshire + Hybrid home working Salary: £40k DOE + Benefits + Company Profit Share Hours: 37.5 hours per week The Role Working alongside two fellow Senior Service Managers, you will form part of a well-established service management team helping to lead the delivery of high-quality IT support services and drive continuous improvement across our operational environment. You will be responsible for the day to day operation of our business as usual support services, including allocating tasks, monitoring and maintaining contractual KPI commitments, producing customer reports, and serving as an escalation point for both internal and external stakeholders. You will take ownership of the end-to-end customer experience, understanding people, processes and technology to maximise service quality and ensure operational excellence. You will also hold line-management responsibilities. Duties Include: Provide strategic oversight of all service operations, including the full lifecycle of incidents, service requests, problems, and major incidents, ensuring SLAs are met and ITIL processes (Major Incident, Change, Problem) are consistently applied. Drive proactive and preventive service delivery by identifying recurring issues, analysing operational data and trends, and implementing improvements that reduce disruption and enhance service stability. Lead customer experience and service governance, including Service Reviews, satisfaction measurement, feedback loops, and actionable service reporting that informs continuous improvement. Build strong relationships with customers, internal teams, and technical stakeholders, acting as a senior escalation point and ensuring collaborative, positive service outcomes. Champion continuous improvement and professional development, driving service quality initiatives, enhancing operational efficiency, and maintaining awareness of evolving technologies and best practice. Skills and Experience: Experience in Service Delivery or IT Service Management (three years preferred), with proven leadership experience, a strong track record managing incidents, problems, and major incidents, and consistently meeting SLAs/KPIs. Solid technical understanding of IT support environments, ideally with previous hands on troubleshooting or IT operations experience. Experience and knowledge of using ITIL v3/v4 best practice. Excellent communication and stakeholder management skills, able to influence senior stakeholders, manage escalations professionally, and present confidently. Strong analytical and reporting ability, using data and service metrics to identify trends, reduce recurring issues, and drive measurable improvements. Ability to learn new technologies quickly. Highly organised and adaptable, capable of managing multiple priorities and performing effectively under pressure. Proactive and improvement focused, committed to continuous learning, professional development, and raising service standards. The role is subject to a standard clear DBS being received. Some travel to customer sites may be involved, so you must have a Full UK Driving license. The Package: Company Profit Share (first £3,600 is tax free) 22 days annual leave plus bank holidays, increasing with length of service Birthday as additional paid leave Additional paid leave (dependent on company performance) Company sick pay policy Pension Scheme Private Medical Insurance including dental Free Parking Hybrid Working Progression opportunities Fresh fruit, the occasional pizza and a posh coffee machine! Trusted Technology Partnership Trusted Technology Partnership has been a specialist IT Infrastructure and Support Services provider for over 25 years. We are an Employee Ownership Trust a growing company. We are proud winners of Best Place to Work award and overall winner of the Ringwood Business Awards 2024. Our core services include support desk, on-site engineering, project management and delivery, storage and logistics, and technical consultancy. We encourage progression within Trusted Technology Partnership for our colleagues, offering opportunities in other teams and departments. Join our friendly company, where a great team and a positive culture await you.
Apr 01, 2026
Full time
IT Service Delivery Manager Position: Senior Service Manager (Internal Name) Location: Ringwood, Hampshire + Hybrid home working Salary: £40k DOE + Benefits + Company Profit Share Hours: 37.5 hours per week The Role Working alongside two fellow Senior Service Managers, you will form part of a well-established service management team helping to lead the delivery of high-quality IT support services and drive continuous improvement across our operational environment. You will be responsible for the day to day operation of our business as usual support services, including allocating tasks, monitoring and maintaining contractual KPI commitments, producing customer reports, and serving as an escalation point for both internal and external stakeholders. You will take ownership of the end-to-end customer experience, understanding people, processes and technology to maximise service quality and ensure operational excellence. You will also hold line-management responsibilities. Duties Include: Provide strategic oversight of all service operations, including the full lifecycle of incidents, service requests, problems, and major incidents, ensuring SLAs are met and ITIL processes (Major Incident, Change, Problem) are consistently applied. Drive proactive and preventive service delivery by identifying recurring issues, analysing operational data and trends, and implementing improvements that reduce disruption and enhance service stability. Lead customer experience and service governance, including Service Reviews, satisfaction measurement, feedback loops, and actionable service reporting that informs continuous improvement. Build strong relationships with customers, internal teams, and technical stakeholders, acting as a senior escalation point and ensuring collaborative, positive service outcomes. Champion continuous improvement and professional development, driving service quality initiatives, enhancing operational efficiency, and maintaining awareness of evolving technologies and best practice. Skills and Experience: Experience in Service Delivery or IT Service Management (three years preferred), with proven leadership experience, a strong track record managing incidents, problems, and major incidents, and consistently meeting SLAs/KPIs. Solid technical understanding of IT support environments, ideally with previous hands on troubleshooting or IT operations experience. Experience and knowledge of using ITIL v3/v4 best practice. Excellent communication and stakeholder management skills, able to influence senior stakeholders, manage escalations professionally, and present confidently. Strong analytical and reporting ability, using data and service metrics to identify trends, reduce recurring issues, and drive measurable improvements. Ability to learn new technologies quickly. Highly organised and adaptable, capable of managing multiple priorities and performing effectively under pressure. Proactive and improvement focused, committed to continuous learning, professional development, and raising service standards. The role is subject to a standard clear DBS being received. Some travel to customer sites may be involved, so you must have a Full UK Driving license. The Package: Company Profit Share (first £3,600 is tax free) 22 days annual leave plus bank holidays, increasing with length of service Birthday as additional paid leave Additional paid leave (dependent on company performance) Company sick pay policy Pension Scheme Private Medical Insurance including dental Free Parking Hybrid Working Progression opportunities Fresh fruit, the occasional pizza and a posh coffee machine! Trusted Technology Partnership Trusted Technology Partnership has been a specialist IT Infrastructure and Support Services provider for over 25 years. We are an Employee Ownership Trust a growing company. We are proud winners of Best Place to Work award and overall winner of the Ringwood Business Awards 2024. Our core services include support desk, on-site engineering, project management and delivery, storage and logistics, and technical consultancy. We encourage progression within Trusted Technology Partnership for our colleagues, offering opportunities in other teams and departments. Join our friendly company, where a great team and a positive culture await you.
Maintenance Engineer Salary: £42,000 per annum Location: Midhurst, West Sussex Hours: 6:00am - 3:00pm Contract: Full-time, permanent Start date: ASAP Benefits: 25 days annual leave + bank holidays, pension scheme, learning & development opportunities About the Role We're seeking a proactive and skilled Maintenance Engineer to join a small, supportive engineering team within a successful food manufacturing environment. You'll play a key role in ensuring machinery, facilities, and production systems run safely and efficiently through planned and reactive maintenance. This position is ideal for someone with strong mechanical and electrical fault-finding experience who thrives in a fast-paced, varied environment. Key Responsibilities Carry out routine inspections , repairs , and planned preventative maintenance to a high standard. Diagnose and resolve mechanical , electrical , and refrigeration plant faults. Maintain accurate maintenance documentation and reporting. Work safely within environments ranging from -35 C freezers to 220 C ovens , ensuring compliance with PPE requirements. Support continuous improvement initiatives across the site. Collaborate effectively with the engineering team and provide support when required. Skills & Experience Needed Essential Trade-tested in an Electrical or Mechanical discipline (electrical bias preferred). Experience in industrial machinery , building/facilities maintenance , or manufacturing environments . Strong fault-finding ability across: Mechanical systems Electrical systems (including 3-phase and motor drivers) PLC-controlled circuits Desirable Refrigeration plant fault-finding experience. Good organisational skills. Strong communication skills. Innovative, self-motivated approach. Additional Information Full PPE must be worn at all times (including hairnets/beard nets). No travel required; this is a single-site role. On-site parking available. Reporting into the Engineering Manager. Team of three engineers. Why This Role Matters This is a key position within the engineering team. Filling it ensures reliable production performance and prevents the wider team from having to cover extended or unscheduled shifts.
Apr 01, 2026
Full time
Maintenance Engineer Salary: £42,000 per annum Location: Midhurst, West Sussex Hours: 6:00am - 3:00pm Contract: Full-time, permanent Start date: ASAP Benefits: 25 days annual leave + bank holidays, pension scheme, learning & development opportunities About the Role We're seeking a proactive and skilled Maintenance Engineer to join a small, supportive engineering team within a successful food manufacturing environment. You'll play a key role in ensuring machinery, facilities, and production systems run safely and efficiently through planned and reactive maintenance. This position is ideal for someone with strong mechanical and electrical fault-finding experience who thrives in a fast-paced, varied environment. Key Responsibilities Carry out routine inspections , repairs , and planned preventative maintenance to a high standard. Diagnose and resolve mechanical , electrical , and refrigeration plant faults. Maintain accurate maintenance documentation and reporting. Work safely within environments ranging from -35 C freezers to 220 C ovens , ensuring compliance with PPE requirements. Support continuous improvement initiatives across the site. Collaborate effectively with the engineering team and provide support when required. Skills & Experience Needed Essential Trade-tested in an Electrical or Mechanical discipline (electrical bias preferred). Experience in industrial machinery , building/facilities maintenance , or manufacturing environments . Strong fault-finding ability across: Mechanical systems Electrical systems (including 3-phase and motor drivers) PLC-controlled circuits Desirable Refrigeration plant fault-finding experience. Good organisational skills. Strong communication skills. Innovative, self-motivated approach. Additional Information Full PPE must be worn at all times (including hairnets/beard nets). No travel required; this is a single-site role. On-site parking available. Reporting into the Engineering Manager. Team of three engineers. Why This Role Matters This is a key position within the engineering team. Filling it ensures reliable production performance and prevents the wider team from having to cover extended or unscheduled shifts.
Job Description: Smart Factory Engineer or Automation Engineer role Location: Birstall, West Yorkshire (on site role) Reporting to: Technical Manager What are we looking for: Experienced controls, automation, IT/OT, systems or MES Engineer with experience in PLCs (preferably Rockwell), factory SCADA systems & MES (Manufacturing Execution System) Solid project Management experience from concept to validation Strong problem-solving & communication skills Have worked in a high-performance culture and can partner closely with multiple stakeholders Proficient in SQL for database queries, scripting, and understanding of IT infrastructure Have a good understanding of lean principles and key losses within manufacturing Previous involvement in a digital transformation rollout is a plus What will be your key responsibilities? Connect factory control systems, sensors, and ERP/MES systems for real-time data monitoring, analytics, and automation Use data analytics to identify bottlenecks and improve yield and quality through the application of lean or six sigma methodologies Execute new solution testing and deployment to provide advanced process control, i.e., Machine Learning algorithms, Machine vision applications, closed loop statistical process control, etc Support the design of digital standards within the COE with input fromthe local site Project manage digital infrastructure extension projects with local teams (Wi-Fi network extension, digital tool addition to workplaces) Collaborate with operations, IT, industrial Engineering and reliability teams to drive change management Actively participate in the regional and global forums for benchmarking and reapplication Bring the outside in through constant scanning of best practices in the industry What Can You Expect from Mars? Consistently ranked among the UK's Top 10 'Great Places to Work' since 2016. Competitive salary, yearly bonus, and comprehensive benefits package. Equal Parental Leave: 52 weeks off (26 paid at 90% salary) for all new parents. Mentoring and development support from day one, including access to Mars University. Purpose-driven work environment focused on building a better world tomorrow. Succession potential for director-level roles through strong performance and personal development. Mars is committed to providing access, equal opportunity, and reasonable adjustments for individuals with disabilities, long-term health conditions, or neurodiversity during the application and recruitment process. To request reasonable adjustments, complete our Reasonable Adjustment Request Form here
Apr 01, 2026
Full time
Job Description: Smart Factory Engineer or Automation Engineer role Location: Birstall, West Yorkshire (on site role) Reporting to: Technical Manager What are we looking for: Experienced controls, automation, IT/OT, systems or MES Engineer with experience in PLCs (preferably Rockwell), factory SCADA systems & MES (Manufacturing Execution System) Solid project Management experience from concept to validation Strong problem-solving & communication skills Have worked in a high-performance culture and can partner closely with multiple stakeholders Proficient in SQL for database queries, scripting, and understanding of IT infrastructure Have a good understanding of lean principles and key losses within manufacturing Previous involvement in a digital transformation rollout is a plus What will be your key responsibilities? Connect factory control systems, sensors, and ERP/MES systems for real-time data monitoring, analytics, and automation Use data analytics to identify bottlenecks and improve yield and quality through the application of lean or six sigma methodologies Execute new solution testing and deployment to provide advanced process control, i.e., Machine Learning algorithms, Machine vision applications, closed loop statistical process control, etc Support the design of digital standards within the COE with input fromthe local site Project manage digital infrastructure extension projects with local teams (Wi-Fi network extension, digital tool addition to workplaces) Collaborate with operations, IT, industrial Engineering and reliability teams to drive change management Actively participate in the regional and global forums for benchmarking and reapplication Bring the outside in through constant scanning of best practices in the industry What Can You Expect from Mars? Consistently ranked among the UK's Top 10 'Great Places to Work' since 2016. Competitive salary, yearly bonus, and comprehensive benefits package. Equal Parental Leave: 52 weeks off (26 paid at 90% salary) for all new parents. Mentoring and development support from day one, including access to Mars University. Purpose-driven work environment focused on building a better world tomorrow. Succession potential for director-level roles through strong performance and personal development. Mars is committed to providing access, equal opportunity, and reasonable adjustments for individuals with disabilities, long-term health conditions, or neurodiversity during the application and recruitment process. To request reasonable adjustments, complete our Reasonable Adjustment Request Form here
Job Description: Smart Factory Engineer or Automation Engineer role Location: Birstall, West Yorkshire (on site role) Reporting to: Technical Manager What are we looking for: Experienced controls, automation, IT/OT, systems or MES Engineer with experience in PLCs (preferably Rockwell), factory SCADA systems & MES (Manufacturing Execution System) Solid project Management experience from concept to validation Strong problem-solving & communication skills Have worked in a high-performance culture and can partner closely with multiple stakeholders Proficient in SQL for database queries, scripting, and understanding of IT infrastructure Have a good understanding of lean principles and key losses within manufacturing Previous involvement in a digital transformation rollout is a plus What will be your key responsibilities? Connect factory control systems, sensors, and ERP/MES systems for real-time data monitoring, analytics, and automation Use data analytics to identify bottlenecks and improve yield and quality through the application of lean or six sigma methodologies Execute new solution testing and deployment to provide advanced process control, i.e., Machine Learning algorithms, Machine vision applications, closed loop statistical process control, etc Support the design of digital standards within the COE with input fromthe local site Project manage digital infrastructure extension projects with local teams (Wi-Fi network extension, digital tool addition to workplaces) Collaborate with operations, IT, industrial Engineering and reliability teams to drive change management Actively participate in the regional and global forums for benchmarking and reapplication Bring the outside in through constant scanning of best practices in the industry What Can You Expect from Mars? Consistently ranked among the UK's Top 10 'Great Places to Work' since 2016. Competitive salary, yearly bonus, and comprehensive benefits package. Equal Parental Leave: 52 weeks off (26 paid at 90% salary) for all new parents. Mentoring and development support from day one, including access to Mars University. Purpose-driven work environment focused on building a better world tomorrow. Succession potential for director-level roles through strong performance and personal development. Mars is committed to providing access, equal opportunity, and reasonable adjustments for individuals with disabilities, long-term health conditions, or neurodiversity during the application and recruitment process. To request reasonable adjustments, complete our Reasonable Adjustment Request Form here
Apr 01, 2026
Full time
Job Description: Smart Factory Engineer or Automation Engineer role Location: Birstall, West Yorkshire (on site role) Reporting to: Technical Manager What are we looking for: Experienced controls, automation, IT/OT, systems or MES Engineer with experience in PLCs (preferably Rockwell), factory SCADA systems & MES (Manufacturing Execution System) Solid project Management experience from concept to validation Strong problem-solving & communication skills Have worked in a high-performance culture and can partner closely with multiple stakeholders Proficient in SQL for database queries, scripting, and understanding of IT infrastructure Have a good understanding of lean principles and key losses within manufacturing Previous involvement in a digital transformation rollout is a plus What will be your key responsibilities? Connect factory control systems, sensors, and ERP/MES systems for real-time data monitoring, analytics, and automation Use data analytics to identify bottlenecks and improve yield and quality through the application of lean or six sigma methodologies Execute new solution testing and deployment to provide advanced process control, i.e., Machine Learning algorithms, Machine vision applications, closed loop statistical process control, etc Support the design of digital standards within the COE with input fromthe local site Project manage digital infrastructure extension projects with local teams (Wi-Fi network extension, digital tool addition to workplaces) Collaborate with operations, IT, industrial Engineering and reliability teams to drive change management Actively participate in the regional and global forums for benchmarking and reapplication Bring the outside in through constant scanning of best practices in the industry What Can You Expect from Mars? Consistently ranked among the UK's Top 10 'Great Places to Work' since 2016. Competitive salary, yearly bonus, and comprehensive benefits package. Equal Parental Leave: 52 weeks off (26 paid at 90% salary) for all new parents. Mentoring and development support from day one, including access to Mars University. Purpose-driven work environment focused on building a better world tomorrow. Succession potential for director-level roles through strong performance and personal development. Mars is committed to providing access, equal opportunity, and reasonable adjustments for individuals with disabilities, long-term health conditions, or neurodiversity during the application and recruitment process. To request reasonable adjustments, complete our Reasonable Adjustment Request Form here
Job Description: Smart Factory Engineer or Automation Engineer role Location: Birstall, West Yorkshire (on site role) Reporting to: Technical Manager What are we looking for: Experienced controls, automation, IT/OT, systems or MES Engineer with experience in PLCs (preferably Rockwell), factory SCADA systems & MES (Manufacturing Execution System) Solid project Management experience from concept to validation Strong problem-solving & communication skills Have worked in a high-performance culture and can partner closely with multiple stakeholders Proficient in SQL for database queries, scripting, and understanding of IT infrastructure Have a good understanding of lean principles and key losses within manufacturing Previous involvement in a digital transformation rollout is a plus What will be your key responsibilities? Connect factory control systems, sensors, and ERP/MES systems for real-time data monitoring, analytics, and automation Use data analytics to identify bottlenecks and improve yield and quality through the application of lean or six sigma methodologies Execute new solution testing and deployment to provide advanced process control, i.e., Machine Learning algorithms, Machine vision applications, closed loop statistical process control, etc Support the design of digital standards within the COE with input fromthe local site Project manage digital infrastructure extension projects with local teams (Wi-Fi network extension, digital tool addition to workplaces) Collaborate with operations, IT, industrial Engineering and reliability teams to drive change management Actively participate in the regional and global forums for benchmarking and reapplication Bring the outside in through constant scanning of best practices in the industry What Can You Expect from Mars? Consistently ranked among the UK's Top 10 'Great Places to Work' since 2016. Competitive salary, yearly bonus, and comprehensive benefits package. Equal Parental Leave: 52 weeks off (26 paid at 90% salary) for all new parents. Mentoring and development support from day one, including access to Mars University. Purpose-driven work environment focused on building a better world tomorrow. Succession potential for director-level roles through strong performance and personal development. Mars is committed to providing access, equal opportunity, and reasonable adjustments for individuals with disabilities, long-term health conditions, or neurodiversity during the application and recruitment process. To request reasonable adjustments, complete our Reasonable Adjustment Request Form here
Apr 01, 2026
Full time
Job Description: Smart Factory Engineer or Automation Engineer role Location: Birstall, West Yorkshire (on site role) Reporting to: Technical Manager What are we looking for: Experienced controls, automation, IT/OT, systems or MES Engineer with experience in PLCs (preferably Rockwell), factory SCADA systems & MES (Manufacturing Execution System) Solid project Management experience from concept to validation Strong problem-solving & communication skills Have worked in a high-performance culture and can partner closely with multiple stakeholders Proficient in SQL for database queries, scripting, and understanding of IT infrastructure Have a good understanding of lean principles and key losses within manufacturing Previous involvement in a digital transformation rollout is a plus What will be your key responsibilities? Connect factory control systems, sensors, and ERP/MES systems for real-time data monitoring, analytics, and automation Use data analytics to identify bottlenecks and improve yield and quality through the application of lean or six sigma methodologies Execute new solution testing and deployment to provide advanced process control, i.e., Machine Learning algorithms, Machine vision applications, closed loop statistical process control, etc Support the design of digital standards within the COE with input fromthe local site Project manage digital infrastructure extension projects with local teams (Wi-Fi network extension, digital tool addition to workplaces) Collaborate with operations, IT, industrial Engineering and reliability teams to drive change management Actively participate in the regional and global forums for benchmarking and reapplication Bring the outside in through constant scanning of best practices in the industry What Can You Expect from Mars? Consistently ranked among the UK's Top 10 'Great Places to Work' since 2016. Competitive salary, yearly bonus, and comprehensive benefits package. Equal Parental Leave: 52 weeks off (26 paid at 90% salary) for all new parents. Mentoring and development support from day one, including access to Mars University. Purpose-driven work environment focused on building a better world tomorrow. Succession potential for director-level roles through strong performance and personal development. Mars is committed to providing access, equal opportunity, and reasonable adjustments for individuals with disabilities, long-term health conditions, or neurodiversity during the application and recruitment process. To request reasonable adjustments, complete our Reasonable Adjustment Request Form here
ETrading Companies edge in energy derivatives is built on the quality of our pricing, volatility models, and risk management. As Staff Vol Options Quant Engineer you will sit at the boundary between rigorous financial research and production engineering - writing models that run live on the trading floor, priced in real time, monitored in production, and generating PnL. You will work directly with traders and risk managers in a true front office environment where the feedback loop between your research and market outcomes is immediate. This is not a research lab role. Requirements 10-15 years combined quant research and software engineering; minimum 5 years embedded in a front office (any asset class) Options pricing across the full surface - vanilla, spreads, and structured products in commodity or energy markets Vol surface calibration: smile fitting, SABR, SVI, Heston, or equivalent; arbitrage constraints and numerical stability in production Greeks and second-order risk: delta, gamma, vega, volga, vanna, theta; PnL attribution and daily risk reconciliation VaR, stressed VaR, and scenario analysis implementation; working knowledge of regulatory capital frameworks Commodity modelling: term structure, forward curve construction, seasonality, convenience yield, and basis risk Real-time pricing and risk system design - latency-aware implementation, incremental recalculation, and feed-driven revaluation Backtesting framework design: walk-forward validation, statistical significance testing, and performance attribution Production-quality Python and/or C++ - code an engineer can review, a CI pipeline can test, and an ops team can support kdb+/q, DB, or TimescaleDB for high-frequency time-series market data storage and analysis Ability to set a research agenda independently and communicate risk and findings clearly to senior traders and management Cloud infrastructure - Azure preferred, AWS considered; IAM, managed services, automated and auditable deployment pipelines, secrets management Nice to Have Market making, systematic execution, or electronic trading in energy or commodity derivatives Asian options, barrier structures, or path-dependent exotics common in commodity markets Machine learning applied to vol forecasting, regime detection, or execution cost optimisation Open-source quant library contributions, published research, or CQF/MFE/PhD in a quantitative discipline To find out more about Huxley, please visit (url removed) Huxley, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy Registered office 8 Bishopsgate, London, EC2N 4BQ, United Kingdom Partnership Number OC(phone number removed) England and Wales
Mar 31, 2026
Full time
ETrading Companies edge in energy derivatives is built on the quality of our pricing, volatility models, and risk management. As Staff Vol Options Quant Engineer you will sit at the boundary between rigorous financial research and production engineering - writing models that run live on the trading floor, priced in real time, monitored in production, and generating PnL. You will work directly with traders and risk managers in a true front office environment where the feedback loop between your research and market outcomes is immediate. This is not a research lab role. Requirements 10-15 years combined quant research and software engineering; minimum 5 years embedded in a front office (any asset class) Options pricing across the full surface - vanilla, spreads, and structured products in commodity or energy markets Vol surface calibration: smile fitting, SABR, SVI, Heston, or equivalent; arbitrage constraints and numerical stability in production Greeks and second-order risk: delta, gamma, vega, volga, vanna, theta; PnL attribution and daily risk reconciliation VaR, stressed VaR, and scenario analysis implementation; working knowledge of regulatory capital frameworks Commodity modelling: term structure, forward curve construction, seasonality, convenience yield, and basis risk Real-time pricing and risk system design - latency-aware implementation, incremental recalculation, and feed-driven revaluation Backtesting framework design: walk-forward validation, statistical significance testing, and performance attribution Production-quality Python and/or C++ - code an engineer can review, a CI pipeline can test, and an ops team can support kdb+/q, DB, or TimescaleDB for high-frequency time-series market data storage and analysis Ability to set a research agenda independently and communicate risk and findings clearly to senior traders and management Cloud infrastructure - Azure preferred, AWS considered; IAM, managed services, automated and auditable deployment pipelines, secrets management Nice to Have Market making, systematic execution, or electronic trading in energy or commodity derivatives Asian options, barrier structures, or path-dependent exotics common in commodity markets Machine learning applied to vol forecasting, regime detection, or execution cost optimisation Open-source quant library contributions, published research, or CQF/MFE/PhD in a quantitative discipline To find out more about Huxley, please visit (url removed) Huxley, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy Registered office 8 Bishopsgate, London, EC2N 4BQ, United Kingdom Partnership Number OC(phone number removed) England and Wales
Our OEM Client based in Gaydon, is searching for a Senior Electronic and Mechanical Integration Engineer to join their team, Inside IR35. This is a contract position with a proposed end date of 31st March 2027. Umbrella Pay Rate: £33.64 per hour. Duties: Responsible for design and integration of electronic and mechanical components and their interfacing during the development of electro-mechanical systems: Participates in cross-functional teams to define requirements, analyse feasibility, and propose solutions that meet customer needs. Conducts system analysis to resolve tradeoffs and drives integration of system engineering tools and processes across platforms to optimize performance. Managing large projects or processes with limited oversight from manager. Problems faced are difficult and often complex. Creating & compiling requirements populating relevant systems with programme requirements, authoring new requirements as necessary. Is able to design, build & test machine learning features to be incorporated into driver modes and attribute features. Creating and defining new attribute related features - supporting the demand process and leading from initial concept to delivery. Develops Simulink models, functional requirements documentation, and test cases. Setting targets definition of full suite of feature and component targets for programme to include cascading to module groups and target negotiation / attribute balancing as necessary. Futuring targets for post Job 1 programme derivatives by consideration of PALS positioning & potential future competitor actions. Definition of test plan work in conjunction with project teams to define test plan for testing in UK & hot & cold climatic conditions. Test to plan and maintain overall target spend levels against budget. Management of multi-functional team to carry out the test plan. Reporting to senior management on the project status at regular milestone reviews represent the team at gateway events. Carry out robust lobbying of other CoC's to ensure attribute targets are met, support project and program meetings VIT, PST, 'Must Resolves', Technical Issues, L1 reviews etc. All reporting out to be completed within gateway timing requirements of project. Carrying out benchmark exercises competitor & product benchmark drives to be carried out. Competitor analysis (over & above benchmarking), desk top data collection & physical measurement of vehicles. Skills Required: Experience with software integration, calibration and delivery. Experience of feature delivery & demand process. Machine learning and experience of using motion detection, prediction and scanning. Experience and knowledge of ADAS system design and integration. Highly self-motivated engineer with proven inter-personal communication/networking skills. Proven project and time management skills and able to work to a high standard with minimum supervision. Demonstrable people-management, team working, organisational and budget management skills. Demonstrating a robust scientific approach with knowledge of design of experiments. Good working knowledge of vehicle engineering, test & development, and experience of whole vehicle evaluation. Confident presentation & report-writing skills; competent use of MS Office. Excellent communication and interpersonal skills, with strong influencing and engagement skills A flexible approach to work beyond normal hours as required. Reasonable flexibility to support overseas testing. Education Required: Educated to degree level or working to obtain a degree.
Mar 31, 2026
Contractor
Our OEM Client based in Gaydon, is searching for a Senior Electronic and Mechanical Integration Engineer to join their team, Inside IR35. This is a contract position with a proposed end date of 31st March 2027. Umbrella Pay Rate: £33.64 per hour. Duties: Responsible for design and integration of electronic and mechanical components and their interfacing during the development of electro-mechanical systems: Participates in cross-functional teams to define requirements, analyse feasibility, and propose solutions that meet customer needs. Conducts system analysis to resolve tradeoffs and drives integration of system engineering tools and processes across platforms to optimize performance. Managing large projects or processes with limited oversight from manager. Problems faced are difficult and often complex. Creating & compiling requirements populating relevant systems with programme requirements, authoring new requirements as necessary. Is able to design, build & test machine learning features to be incorporated into driver modes and attribute features. Creating and defining new attribute related features - supporting the demand process and leading from initial concept to delivery. Develops Simulink models, functional requirements documentation, and test cases. Setting targets definition of full suite of feature and component targets for programme to include cascading to module groups and target negotiation / attribute balancing as necessary. Futuring targets for post Job 1 programme derivatives by consideration of PALS positioning & potential future competitor actions. Definition of test plan work in conjunction with project teams to define test plan for testing in UK & hot & cold climatic conditions. Test to plan and maintain overall target spend levels against budget. Management of multi-functional team to carry out the test plan. Reporting to senior management on the project status at regular milestone reviews represent the team at gateway events. Carry out robust lobbying of other CoC's to ensure attribute targets are met, support project and program meetings VIT, PST, 'Must Resolves', Technical Issues, L1 reviews etc. All reporting out to be completed within gateway timing requirements of project. Carrying out benchmark exercises competitor & product benchmark drives to be carried out. Competitor analysis (over & above benchmarking), desk top data collection & physical measurement of vehicles. Skills Required: Experience with software integration, calibration and delivery. Experience of feature delivery & demand process. Machine learning and experience of using motion detection, prediction and scanning. Experience and knowledge of ADAS system design and integration. Highly self-motivated engineer with proven inter-personal communication/networking skills. Proven project and time management skills and able to work to a high standard with minimum supervision. Demonstrable people-management, team working, organisational and budget management skills. Demonstrating a robust scientific approach with knowledge of design of experiments. Good working knowledge of vehicle engineering, test & development, and experience of whole vehicle evaluation. Confident presentation & report-writing skills; competent use of MS Office. Excellent communication and interpersonal skills, with strong influencing and engagement skills A flexible approach to work beyond normal hours as required. Reasonable flexibility to support overseas testing. Education Required: Educated to degree level or working to obtain a degree.
Manufacturing Supervisor (Machines) Our prestigious manufacturing-based client, based in Norwich, are seeking a Manufacturing Supervisor to join their team. This is a full time role working Monday Friday 38 hours per week. Knowledge, Skills & Qualifications: HNC or NVQ level 4 in an Electro-mechanical discipline Experience supervising teams in a manufacturing environment, ideally in machine or electro-mechanical assembly. Strong understanding of engineering drawings, wiring diagrams, and mechanical/electrical assembly practices. Continuous Improvement qualification (e.g. Lean, Six Sigma) Desirable IOSH Managing Safety Desirable Experience with ERP/MRP systems and production reporting. Desirable Background in low-volume, high-complexity machinery builds or precision assemblies. Desirable Proven ability to lead, motivate, and develop production teams. Strong organisational and problem-solving skills with the ability to react quickly to changing priorities. Working knowledge of Lean manufacturing principles and continuous improvement methods. Position Overview The Manufacturing Supervisor will supervise a team responsible for both electrical and mechanical machine assembly operations. This role ensures that production output meets safety, quality, delivery, and cost targets while fostering a culture of continuous improvement and high team performance. The Supervisor will oversee day-to-day shop-floor activities, coordinate workflow, support technical problem-solving, and ensure adherence to assembly standards, engineering specifications, and operational procedures. Key Performance Indicators Manufacturing Efficiency KPIs (set-up, run, waste, costs etc). On-time to Plan manufacture complete and picked for shipment. Inventory Accuracy. E1 Transactional Accuracy. Quality Complaints. Safety Incident Rate. Quantity of near miss reports. Key Accountabilities Quality and on-time manufacture of machine products manufactured in Norwich. Direct and motivate the manufacturing team. Support training and upskilling of assemblers, including competency assessments and cross-training. Ensuring all EHS standards and policies are adhered to and that the safety culture is actively promoted. Ensuring all BRCGS standards and policies are adhered to. Conduct daily briefings , allocate work, and ensure appropriate resource coverage across shifts. Oversee the assembly of machinery, sub-assemblies , and electro-mechanical units to engineering drawings, wiring diagrams, and build specifications. Monitor workflow and production schedules to ensure on-time delivery and adherence to schedule. Ensure metrics and targets are clear using Visual Management across the department. Coordinate with Supply Chain, Engineering, and Quality, to resolve constraints and ensure smooth operations. Ensure compliance with manufacturing processes, standard work, and assembly documentation. Enforce quality standards and ensure first-time-right output. Conduct in-process inspections and support root-cause analysis for defects or rework issues. Maintain compliance with ISO, safety, and regulatory requirements. Support implementation of engineering changes and ensure documentation is updated and followed. Identify and implement improvements using Lean tools such as 5S, Kaizen, standard work, and waste reduction. Analyse production data to uncover trends, bottlenecks, and opportunities for efficiency gains. Champion continuous improvement behaviours and empower the team to contribute ideas. Ensure risk assessments, method statements, and equipment checks are up to date. Lead incident investigations and implement corrective actions where required. Abide by all statutory requirements and adhere to and promote all company policies and procedures including (but not limited to) those relating to HR, quality, food safety, environmental, and health and safety. Undertake any other reasonable duties as directed by the line manager. This job role requires use of the E1 platform to perform certain processes. Therefore, the job holder must: follow the agreed process within E1 and not deviate from, bypass or circumnavigate the E1 system in anyway (unless formally approved by their line manager/LG) to perform these tasks complete all assigned E1 training modules in the Learning Management System (LMS) relating to their assigned E1 Learning Plan Manufacturing Supervisor be formally signed off, by their Line Manager, as competent before access to the live E1 environment is granted. Company benefits: Auto enrolment pension after 3 months, employees cont. 2.5% employers cont. 10% Annual leave starts at 24 days per year, increase 1 day per year for 4 years up to 28 days, 10 years increase to 30 days Wellbeing days Family Summer Day Christmas Party Pantomime Employee excellence awards Peer recognition programme One Good Apple After successful 6-month probation Option to join Private Healthcare Insurance, taxable benefit Companywide profit share scheme, potentially dependant on company profit after one year passed probation Free refreshments, tea & coffee on site Free fruit Wednesdays Access to an EAP, which also covers immediate family members Access to fully trained mental health first aiders For further details regarding this great opportunity, please email a copy of your CV today. Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications, we receive I m afraid we are unable to respond to everyone individually however your details will remain on file should another suitable opportunity become available moving forward. Todd Hayes is acting as an Employment Business in relation to this vacancy. Todd Hayes Ltd
Mar 31, 2026
Full time
Manufacturing Supervisor (Machines) Our prestigious manufacturing-based client, based in Norwich, are seeking a Manufacturing Supervisor to join their team. This is a full time role working Monday Friday 38 hours per week. Knowledge, Skills & Qualifications: HNC or NVQ level 4 in an Electro-mechanical discipline Experience supervising teams in a manufacturing environment, ideally in machine or electro-mechanical assembly. Strong understanding of engineering drawings, wiring diagrams, and mechanical/electrical assembly practices. Continuous Improvement qualification (e.g. Lean, Six Sigma) Desirable IOSH Managing Safety Desirable Experience with ERP/MRP systems and production reporting. Desirable Background in low-volume, high-complexity machinery builds or precision assemblies. Desirable Proven ability to lead, motivate, and develop production teams. Strong organisational and problem-solving skills with the ability to react quickly to changing priorities. Working knowledge of Lean manufacturing principles and continuous improvement methods. Position Overview The Manufacturing Supervisor will supervise a team responsible for both electrical and mechanical machine assembly operations. This role ensures that production output meets safety, quality, delivery, and cost targets while fostering a culture of continuous improvement and high team performance. The Supervisor will oversee day-to-day shop-floor activities, coordinate workflow, support technical problem-solving, and ensure adherence to assembly standards, engineering specifications, and operational procedures. Key Performance Indicators Manufacturing Efficiency KPIs (set-up, run, waste, costs etc). On-time to Plan manufacture complete and picked for shipment. Inventory Accuracy. E1 Transactional Accuracy. Quality Complaints. Safety Incident Rate. Quantity of near miss reports. Key Accountabilities Quality and on-time manufacture of machine products manufactured in Norwich. Direct and motivate the manufacturing team. Support training and upskilling of assemblers, including competency assessments and cross-training. Ensuring all EHS standards and policies are adhered to and that the safety culture is actively promoted. Ensuring all BRCGS standards and policies are adhered to. Conduct daily briefings , allocate work, and ensure appropriate resource coverage across shifts. Oversee the assembly of machinery, sub-assemblies , and electro-mechanical units to engineering drawings, wiring diagrams, and build specifications. Monitor workflow and production schedules to ensure on-time delivery and adherence to schedule. Ensure metrics and targets are clear using Visual Management across the department. Coordinate with Supply Chain, Engineering, and Quality, to resolve constraints and ensure smooth operations. Ensure compliance with manufacturing processes, standard work, and assembly documentation. Enforce quality standards and ensure first-time-right output. Conduct in-process inspections and support root-cause analysis for defects or rework issues. Maintain compliance with ISO, safety, and regulatory requirements. Support implementation of engineering changes and ensure documentation is updated and followed. Identify and implement improvements using Lean tools such as 5S, Kaizen, standard work, and waste reduction. Analyse production data to uncover trends, bottlenecks, and opportunities for efficiency gains. Champion continuous improvement behaviours and empower the team to contribute ideas. Ensure risk assessments, method statements, and equipment checks are up to date. Lead incident investigations and implement corrective actions where required. Abide by all statutory requirements and adhere to and promote all company policies and procedures including (but not limited to) those relating to HR, quality, food safety, environmental, and health and safety. Undertake any other reasonable duties as directed by the line manager. This job role requires use of the E1 platform to perform certain processes. Therefore, the job holder must: follow the agreed process within E1 and not deviate from, bypass or circumnavigate the E1 system in anyway (unless formally approved by their line manager/LG) to perform these tasks complete all assigned E1 training modules in the Learning Management System (LMS) relating to their assigned E1 Learning Plan Manufacturing Supervisor be formally signed off, by their Line Manager, as competent before access to the live E1 environment is granted. Company benefits: Auto enrolment pension after 3 months, employees cont. 2.5% employers cont. 10% Annual leave starts at 24 days per year, increase 1 day per year for 4 years up to 28 days, 10 years increase to 30 days Wellbeing days Family Summer Day Christmas Party Pantomime Employee excellence awards Peer recognition programme One Good Apple After successful 6-month probation Option to join Private Healthcare Insurance, taxable benefit Companywide profit share scheme, potentially dependant on company profit after one year passed probation Free refreshments, tea & coffee on site Free fruit Wednesdays Access to an EAP, which also covers immediate family members Access to fully trained mental health first aiders For further details regarding this great opportunity, please email a copy of your CV today. Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications, we receive I m afraid we are unable to respond to everyone individually however your details will remain on file should another suitable opportunity become available moving forward. Todd Hayes is acting as an Employment Business in relation to this vacancy. Todd Hayes Ltd
NATS are currently seeking a Project Engineering Manager to oversee complex technical deliveries in Aberdeen. This role focuses on the high-profile management of projects within the Air Traffic Management domain, incorporating cutting-edge technologies such as virtualised platforms, machine learning, and artificial intelligence. Key Responsibilities: Lead the technical delivery of high-profile or multiple complex work packages, ensuring alignment and resource management Apply systems engineering principles to define, plan, and deliver project activities Act as the technical point of contact for internal and external stakeholders Ensure the quality and alignment of project outputs Manage and execute the scope of work, defining activities across projects Provide assurance of the content of plans and work packages to stakeholders Proactively manage technical delivery risks and identify solutions Oversee task management and direction to a team of engineers and subject matter experts Job Requirements: Professional engineering qualification in Electronics, Telecommunications, Computer Science, or a relevant field Significant experience in systems engineering or technical project delivery in safety-critical environments Strong planning and organisational skills, with the ability to work autonomously Proven ability to manage multidisciplinary teams and third-party suppliers Excellent communication and stakeholder management skills Ability to translate complex engineering issues into plain English Track record of proactive problem-solving and decision-making If you are an experienced Project Engineering Manager looking to further your career in the defence and security sector, we would love to hear from you.
Mar 31, 2026
Contractor
NATS are currently seeking a Project Engineering Manager to oversee complex technical deliveries in Aberdeen. This role focuses on the high-profile management of projects within the Air Traffic Management domain, incorporating cutting-edge technologies such as virtualised platforms, machine learning, and artificial intelligence. Key Responsibilities: Lead the technical delivery of high-profile or multiple complex work packages, ensuring alignment and resource management Apply systems engineering principles to define, plan, and deliver project activities Act as the technical point of contact for internal and external stakeholders Ensure the quality and alignment of project outputs Manage and execute the scope of work, defining activities across projects Provide assurance of the content of plans and work packages to stakeholders Proactively manage technical delivery risks and identify solutions Oversee task management and direction to a team of engineers and subject matter experts Job Requirements: Professional engineering qualification in Electronics, Telecommunications, Computer Science, or a relevant field Significant experience in systems engineering or technical project delivery in safety-critical environments Strong planning and organisational skills, with the ability to work autonomously Proven ability to manage multidisciplinary teams and third-party suppliers Excellent communication and stakeholder management skills Ability to translate complex engineering issues into plain English Track record of proactive problem-solving and decision-making If you are an experienced Project Engineering Manager looking to further your career in the defence and security sector, we would love to hear from you.
Inscope Technology: Google Cloud Platform infrastructure: Compute Engine Red Hat Enterprise Linux (RHEL) virtual machines Windows virtual machines Local SSD Persistent Disk Cloud Networking Cloud Logging Cloud Monitoring Cloud Storage Cloud Key Management Cloud Secret Manager Dynatrace GitHub Enterprise HashiCorp products, including Terraform and Packer Jenkins Backstage Jira Cloud and Jira Align Skillset Required: Google Cloud Platform Infrastructure Engineering: Proven experience designing, building, and operating secure, automated cloud platform capabilities, with a focus on Google compute products and services. Infrastructure as Code: Proficiency with Terraform (minimum), Jenkins, and modern CI/CD systems (GitHub Actions, Harness, Jenkins). Networking & Security: Experience with GCP Cloud Armor, GCP Networking, and embedding secure-by-design controls from design to runtime. Automation & Observability: Implementing actionable observability, performance tuning, and automation to reduce toil. Defining and operating against SLOs/SLIs. Scripting & Tooling: Scripting in Bash, PowerShell, or Python. Familiarity with HashiCorp Vault, Harness, and Backstage is desirable. Team Leadership, Collaboration & Mentoring: Ability to lead and motivate a team of infrastructure engineers, ensuring cross-team collaboration and mentoring. Certifications: Relevant GCP certifications are desirable. Scope of services As an infrastructure engineering lead within the Public Cloud Services Compute (GCP DCX) team, the scope of service includes: Design, Build, and Operate: Deliver and maintain secure, automated Google compute capabilities, supporting Red Hat Enterprise Linux (RHEL) and Windows virtual machine and broader compute and networking products and configurations. Platform Enablement: Enable product teams to deliver Google IaaS solutions at pace, leveraging reusable patterns and robust integration tools. Infrastructure Automation: Develop and maintain Infrastructure as Code (IaC) solutions for provisioning and managing Google resources, ensuring repeatability and compliance. Security & Compliance: Embed security best practices and controls throughout the platform life cycle, safeguarding organisational and customer data. Performance & Reliability: Define, monitor, and operate against service level objectives (SLOs/SLIs), ensuring high availability, performance, and fault tolerance. Continuous Improvement: Drive automation, observability, and performance tuning to reduce manual effort and improve platform reliability. Collaboration: Work closely with architecture and feature teams to evolve the cloud roadmap and platform products, contributing to documentation and enablement. Team Leadership, Mentoring & Standards: Lead, motivate, and mentor a team of infrastructure engineers and uphold engineering standards, fostering a culture of continuous learning and improvement.
Mar 31, 2026
Full time
Inscope Technology: Google Cloud Platform infrastructure: Compute Engine Red Hat Enterprise Linux (RHEL) virtual machines Windows virtual machines Local SSD Persistent Disk Cloud Networking Cloud Logging Cloud Monitoring Cloud Storage Cloud Key Management Cloud Secret Manager Dynatrace GitHub Enterprise HashiCorp products, including Terraform and Packer Jenkins Backstage Jira Cloud and Jira Align Skillset Required: Google Cloud Platform Infrastructure Engineering: Proven experience designing, building, and operating secure, automated cloud platform capabilities, with a focus on Google compute products and services. Infrastructure as Code: Proficiency with Terraform (minimum), Jenkins, and modern CI/CD systems (GitHub Actions, Harness, Jenkins). Networking & Security: Experience with GCP Cloud Armor, GCP Networking, and embedding secure-by-design controls from design to runtime. Automation & Observability: Implementing actionable observability, performance tuning, and automation to reduce toil. Defining and operating against SLOs/SLIs. Scripting & Tooling: Scripting in Bash, PowerShell, or Python. Familiarity with HashiCorp Vault, Harness, and Backstage is desirable. Team Leadership, Collaboration & Mentoring: Ability to lead and motivate a team of infrastructure engineers, ensuring cross-team collaboration and mentoring. Certifications: Relevant GCP certifications are desirable. Scope of services As an infrastructure engineering lead within the Public Cloud Services Compute (GCP DCX) team, the scope of service includes: Design, Build, and Operate: Deliver and maintain secure, automated Google compute capabilities, supporting Red Hat Enterprise Linux (RHEL) and Windows virtual machine and broader compute and networking products and configurations. Platform Enablement: Enable product teams to deliver Google IaaS solutions at pace, leveraging reusable patterns and robust integration tools. Infrastructure Automation: Develop and maintain Infrastructure as Code (IaC) solutions for provisioning and managing Google resources, ensuring repeatability and compliance. Security & Compliance: Embed security best practices and controls throughout the platform life cycle, safeguarding organisational and customer data. Performance & Reliability: Define, monitor, and operate against service level objectives (SLOs/SLIs), ensuring high availability, performance, and fault tolerance. Continuous Improvement: Drive automation, observability, and performance tuning to reduce manual effort and improve platform reliability. Collaboration: Work closely with architecture and feature teams to evolve the cloud roadmap and platform products, contributing to documentation and enablement. Team Leadership, Mentoring & Standards: Lead, motivate, and mentor a team of infrastructure engineers and uphold engineering standards, fostering a culture of continuous learning and improvement.
Job Description: Smart Factory Engineer or Automation Engineer role Location: Birstall, West Yorkshire (on site role) Reporting to: Technical Manager What are we looking for: Experienced controls, automation, IT/OT, systems or MES Engineer with experience in PLCs (preferably Rockwell), factory SCADA systems & MES (Manufacturing Execution System) Solid project Management experience from concept to validation Strong problem-solving & communication skills Have worked in a high-performance culture and can partner closely with multiple stakeholders Proficient in SQL for database queries, scripting, and understanding of IT infrastructure Have a good understanding of lean principles and key losses within manufacturing Previous involvement in a digital transformation rollout is a plus What will be your key responsibilities? Connect factory control systems, sensors, and ERP/MES systems for real-time data monitoring, analytics, and automation Use data analytics to identify bottlenecks and improve yield and quality through the application of lean or six sigma methodologies Execute new solution testing and deployment to provide advanced process control, i.e., Machine Learning algorithms, Machine vision applications, closed loop statistical process control, etc Support the design of digital standards within the COE with input fromthe local site Project manage digital infrastructure extension projects with local teams (Wi-Fi network extension, digital tool addition to workplaces) Collaborate with operations, IT, industrial Engineering and reliability teams to drive change management Actively participate in the regional and global forums for benchmarking and reapplication Bring the outside in through constant scanning of best practices in the industry What Can You Expect from Mars? Consistently ranked among the UK's Top 10 'Great Places to Work' since 2016. Competitive salary, yearly bonus, and comprehensive benefits package. Equal Parental Leave: 52 weeks off (26 paid at 90% salary) for all new parents. Mentoring and development support from day one, including access to Mars University. Purpose-driven work environment focused on building a better world tomorrow. Succession potential for director-level roles through strong performance and personal development. Mars is committed to providing access, equal opportunity, and reasonable adjustments for individuals with disabilities, long-term health conditions, or neurodiversity during the application and recruitment process. To request reasonable adjustments, complete our Reasonable Adjustment Request Form here
Mar 30, 2026
Full time
Job Description: Smart Factory Engineer or Automation Engineer role Location: Birstall, West Yorkshire (on site role) Reporting to: Technical Manager What are we looking for: Experienced controls, automation, IT/OT, systems or MES Engineer with experience in PLCs (preferably Rockwell), factory SCADA systems & MES (Manufacturing Execution System) Solid project Management experience from concept to validation Strong problem-solving & communication skills Have worked in a high-performance culture and can partner closely with multiple stakeholders Proficient in SQL for database queries, scripting, and understanding of IT infrastructure Have a good understanding of lean principles and key losses within manufacturing Previous involvement in a digital transformation rollout is a plus What will be your key responsibilities? Connect factory control systems, sensors, and ERP/MES systems for real-time data monitoring, analytics, and automation Use data analytics to identify bottlenecks and improve yield and quality through the application of lean or six sigma methodologies Execute new solution testing and deployment to provide advanced process control, i.e., Machine Learning algorithms, Machine vision applications, closed loop statistical process control, etc Support the design of digital standards within the COE with input fromthe local site Project manage digital infrastructure extension projects with local teams (Wi-Fi network extension, digital tool addition to workplaces) Collaborate with operations, IT, industrial Engineering and reliability teams to drive change management Actively participate in the regional and global forums for benchmarking and reapplication Bring the outside in through constant scanning of best practices in the industry What Can You Expect from Mars? Consistently ranked among the UK's Top 10 'Great Places to Work' since 2016. Competitive salary, yearly bonus, and comprehensive benefits package. Equal Parental Leave: 52 weeks off (26 paid at 90% salary) for all new parents. Mentoring and development support from day one, including access to Mars University. Purpose-driven work environment focused on building a better world tomorrow. Succession potential for director-level roles through strong performance and personal development. Mars is committed to providing access, equal opportunity, and reasonable adjustments for individuals with disabilities, long-term health conditions, or neurodiversity during the application and recruitment process. To request reasonable adjustments, complete our Reasonable Adjustment Request Form here
Job Description: Smart Factory Engineer or Automation Engineer role Location: Birstall, West Yorkshire (on site role) Reporting to: Technical Manager What are we looking for: Experienced controls, automation, IT/OT, systems or MES Engineer with experience in PLCs (preferably Rockwell), factory SCADA systems & MES (Manufacturing Execution System) Solid project Management experience from concept to validation Strong problem-solving & communication skills Have worked in a high-performance culture and can partner closely with multiple stakeholders Proficient in SQL for database queries, scripting, and understanding of IT infrastructure Have a good understanding of lean principles and key losses within manufacturing Previous involvement in a digital transformation rollout is a plus What will be your key responsibilities? Connect factory control systems, sensors, and ERP/MES systems for real-time data monitoring, analytics, and automation Use data analytics to identify bottlenecks and improve yield and quality through the application of lean or six sigma methodologies Execute new solution testing and deployment to provide advanced process control, i.e., Machine Learning algorithms, Machine vision applications, closed loop statistical process control, etc Support the design of digital standards within the COE with input fromthe local site Project manage digital infrastructure extension projects with local teams (Wi-Fi network extension, digital tool addition to workplaces) Collaborate with operations, IT, industrial Engineering and reliability teams to drive change management Actively participate in the regional and global forums for benchmarking and reapplication Bring the outside in through constant scanning of best practices in the industry What Can You Expect from Mars? Consistently ranked among the UK's Top 10 'Great Places to Work' since 2016. Competitive salary, yearly bonus, and comprehensive benefits package. Equal Parental Leave: 52 weeks off (26 paid at 90% salary) for all new parents. Mentoring and development support from day one, including access to Mars University. Purpose-driven work environment focused on building a better world tomorrow. Succession potential for director-level roles through strong performance and personal development. Mars is committed to providing access, equal opportunity, and reasonable adjustments for individuals with disabilities, long-term health conditions, or neurodiversity during the application and recruitment process. To request reasonable adjustments, complete our Reasonable Adjustment Request Form here
Mar 30, 2026
Full time
Job Description: Smart Factory Engineer or Automation Engineer role Location: Birstall, West Yorkshire (on site role) Reporting to: Technical Manager What are we looking for: Experienced controls, automation, IT/OT, systems or MES Engineer with experience in PLCs (preferably Rockwell), factory SCADA systems & MES (Manufacturing Execution System) Solid project Management experience from concept to validation Strong problem-solving & communication skills Have worked in a high-performance culture and can partner closely with multiple stakeholders Proficient in SQL for database queries, scripting, and understanding of IT infrastructure Have a good understanding of lean principles and key losses within manufacturing Previous involvement in a digital transformation rollout is a plus What will be your key responsibilities? Connect factory control systems, sensors, and ERP/MES systems for real-time data monitoring, analytics, and automation Use data analytics to identify bottlenecks and improve yield and quality through the application of lean or six sigma methodologies Execute new solution testing and deployment to provide advanced process control, i.e., Machine Learning algorithms, Machine vision applications, closed loop statistical process control, etc Support the design of digital standards within the COE with input fromthe local site Project manage digital infrastructure extension projects with local teams (Wi-Fi network extension, digital tool addition to workplaces) Collaborate with operations, IT, industrial Engineering and reliability teams to drive change management Actively participate in the regional and global forums for benchmarking and reapplication Bring the outside in through constant scanning of best practices in the industry What Can You Expect from Mars? Consistently ranked among the UK's Top 10 'Great Places to Work' since 2016. Competitive salary, yearly bonus, and comprehensive benefits package. Equal Parental Leave: 52 weeks off (26 paid at 90% salary) for all new parents. Mentoring and development support from day one, including access to Mars University. Purpose-driven work environment focused on building a better world tomorrow. Succession potential for director-level roles through strong performance and personal development. Mars is committed to providing access, equal opportunity, and reasonable adjustments for individuals with disabilities, long-term health conditions, or neurodiversity during the application and recruitment process. To request reasonable adjustments, complete our Reasonable Adjustment Request Form here
Job Description: Smart Factory Engineer or Automation Engineer role Location: Birstall, West Yorkshire (on site role) Reporting to: Technical Manager What are we looking for: Experienced controls, automation, IT/OT, systems or MES Engineer with experience in PLCs (preferably Rockwell), factory SCADA systems & MES (Manufacturing Execution System) Solid project Management experience from concept to validation Strong problem-solving & communication skills Have worked in a high-performance culture and can partner closely with multiple stakeholders Proficient in SQL for database queries, scripting, and understanding of IT infrastructure Have a good understanding of lean principles and key losses within manufacturing Previous involvement in a digital transformation rollout is a plus What will be your key responsibilities? Connect factory control systems, sensors, and ERP/MES systems for real-time data monitoring, analytics, and automation Use data analytics to identify bottlenecks and improve yield and quality through the application of lean or six sigma methodologies Execute new solution testing and deployment to provide advanced process control, i.e., Machine Learning algorithms, Machine vision applications, closed loop statistical process control, etc Support the design of digital standards within the COE with input fromthe local site Project manage digital infrastructure extension projects with local teams (Wi-Fi network extension, digital tool addition to workplaces) Collaborate with operations, IT, industrial Engineering and reliability teams to drive change management Actively participate in the regional and global forums for benchmarking and reapplication Bring the outside in through constant scanning of best practices in the industry What Can You Expect from Mars? Consistently ranked among the UK's Top 10 'Great Places to Work' since 2016. Competitive salary, yearly bonus, and comprehensive benefits package. Equal Parental Leave: 52 weeks off (26 paid at 90% salary) for all new parents. Mentoring and development support from day one, including access to Mars University. Purpose-driven work environment focused on building a better world tomorrow. Succession potential for director-level roles through strong performance and personal development. Mars is committed to providing access, equal opportunity, and reasonable adjustments for individuals with disabilities, long-term health conditions, or neurodiversity during the application and recruitment process. To request reasonable adjustments, complete our Reasonable Adjustment Request Form here
Mar 30, 2026
Full time
Job Description: Smart Factory Engineer or Automation Engineer role Location: Birstall, West Yorkshire (on site role) Reporting to: Technical Manager What are we looking for: Experienced controls, automation, IT/OT, systems or MES Engineer with experience in PLCs (preferably Rockwell), factory SCADA systems & MES (Manufacturing Execution System) Solid project Management experience from concept to validation Strong problem-solving & communication skills Have worked in a high-performance culture and can partner closely with multiple stakeholders Proficient in SQL for database queries, scripting, and understanding of IT infrastructure Have a good understanding of lean principles and key losses within manufacturing Previous involvement in a digital transformation rollout is a plus What will be your key responsibilities? Connect factory control systems, sensors, and ERP/MES systems for real-time data monitoring, analytics, and automation Use data analytics to identify bottlenecks and improve yield and quality through the application of lean or six sigma methodologies Execute new solution testing and deployment to provide advanced process control, i.e., Machine Learning algorithms, Machine vision applications, closed loop statistical process control, etc Support the design of digital standards within the COE with input fromthe local site Project manage digital infrastructure extension projects with local teams (Wi-Fi network extension, digital tool addition to workplaces) Collaborate with operations, IT, industrial Engineering and reliability teams to drive change management Actively participate in the regional and global forums for benchmarking and reapplication Bring the outside in through constant scanning of best practices in the industry What Can You Expect from Mars? Consistently ranked among the UK's Top 10 'Great Places to Work' since 2016. Competitive salary, yearly bonus, and comprehensive benefits package. Equal Parental Leave: 52 weeks off (26 paid at 90% salary) for all new parents. Mentoring and development support from day one, including access to Mars University. Purpose-driven work environment focused on building a better world tomorrow. Succession potential for director-level roles through strong performance and personal development. Mars is committed to providing access, equal opportunity, and reasonable adjustments for individuals with disabilities, long-term health conditions, or neurodiversity during the application and recruitment process. To request reasonable adjustments, complete our Reasonable Adjustment Request Form here
Job Title: Technical Project Manager (BTIIC) Department/School: School of Computing Campus: Belfast campus Salary: Grade 9 (£60,001 - £69,527 per annum) Duration: Fixed term until 31st March 2028 / Full-time Closing Date: 15th April 2026 Reference Number: 041686 - ABOUT US - We are a university with a national and international reputation for excellence, innovation and regional engagement, making a major contribution to the economic, social and cultural development of Northern Ireland. Our core business activities are teaching and learning, widening access to education, research and innovation and technology and knowledge transfer. - THE ROLE - The postholder will be a full-time, dedicated project manager in the Ulster team, responsible for reporting on the progress of all Ulster's contractual responsibilities to BT. The role will focus primarily on ensuring strict financial management of the (Ulster) BTIIC budget, and tracking progress of KPIs and deliverables. The Technical Project Manager will also provide technical research management, direction and operational leadership that will enable the clear interpretation of project requirements and monitoring and assessment of performance and progress. To achieve this, they will play a central role in managing the Ulster University research team's interactions with BT, with a particular focus on those areas where engineering down-streaming is prioritised. We may create a 12-month waiting list for the same or similar roles within the Department / Faculty. The University reserves the right to extend the waiting list across the University if required for certain posts. - ABOUT YOU - The postholder will be required to have: - A Degree in Computer Science, Telecommunications, Electronic Engineering, or related discipline. - A PhD in Computer Science, Telecommunications, Electronic Engineering, or related discipline. - Extensive experience of working in a Research and Development environment in the areas of Machine Learning, IoT and Network Security. Please find our employee benefits on our website. Athena Swan Statement The School of Computing holds a Bronze Athena SWAN Award in recognition of our commitment to advancing Gender equality in higher education. You can read more about what this means on our University website. The University has a range of initiatives to support a family friendly working environment, including flexible working. The University is an equal opportunities employer and welcomes applicants from all sections of the community, particularly from those with disabilities. Appointment will be made on merit.
Mar 30, 2026
Full time
Job Title: Technical Project Manager (BTIIC) Department/School: School of Computing Campus: Belfast campus Salary: Grade 9 (£60,001 - £69,527 per annum) Duration: Fixed term until 31st March 2028 / Full-time Closing Date: 15th April 2026 Reference Number: 041686 - ABOUT US - We are a university with a national and international reputation for excellence, innovation and regional engagement, making a major contribution to the economic, social and cultural development of Northern Ireland. Our core business activities are teaching and learning, widening access to education, research and innovation and technology and knowledge transfer. - THE ROLE - The postholder will be a full-time, dedicated project manager in the Ulster team, responsible for reporting on the progress of all Ulster's contractual responsibilities to BT. The role will focus primarily on ensuring strict financial management of the (Ulster) BTIIC budget, and tracking progress of KPIs and deliverables. The Technical Project Manager will also provide technical research management, direction and operational leadership that will enable the clear interpretation of project requirements and monitoring and assessment of performance and progress. To achieve this, they will play a central role in managing the Ulster University research team's interactions with BT, with a particular focus on those areas where engineering down-streaming is prioritised. We may create a 12-month waiting list for the same or similar roles within the Department / Faculty. The University reserves the right to extend the waiting list across the University if required for certain posts. - ABOUT YOU - The postholder will be required to have: - A Degree in Computer Science, Telecommunications, Electronic Engineering, or related discipline. - A PhD in Computer Science, Telecommunications, Electronic Engineering, or related discipline. - Extensive experience of working in a Research and Development environment in the areas of Machine Learning, IoT and Network Security. Please find our employee benefits on our website. Athena Swan Statement The School of Computing holds a Bronze Athena SWAN Award in recognition of our commitment to advancing Gender equality in higher education. You can read more about what this means on our University website. The University has a range of initiatives to support a family friendly working environment, including flexible working. The University is an equal opportunities employer and welcomes applicants from all sections of the community, particularly from those with disabilities. Appointment will be made on merit.
Are you a strong leader who is keen to make a real difference in a busy engineering team? If so, this could be fit your skills perfectly. Working with a nationally recognised engineering brand this Electrical Engineering Manager provides a varied mix of work across historical industrial machinery through to state of the art, 2 weeks old technology with millions of pounds spent recently upgrading their machines. This role is paying one of the highest packages in the geographical area and would suit someone who is hardworking and career minded. Salary : £60,000 - £74,000 PA Title : Electrical Engineering Manager Location : Bury St Edmunds Electrical Engineering Manager s Key Responsibilities: Act as the site Subject Matter Expert for all electrical engineering activities and lead control and instrumentation experts to enhance safety, reliability, and production performance. Coach and support Autonomous Production Unit (APU) teams to maintain technical integrity and ensure systems meet required standards. Implement and manage Electrical and Control codes of practice and procedures. Serve as the Responsible Person for managing potentially explosive atmospheres (DSEAR). Line manage and develop the Electrical and Instrument Support Manager, fostering learning, mentoring, and succession planning. Lead and motivate the Control Engineering Team, ensuring engagement, capability, and efficiency. Maintain a five-year plan for managing electrical and control assets. Skills & Experience Required as the Electrical Engineering Manager: HND or Degree in Electrical Engineering (or equivalent). Working knowledge of British Standards for engineering plant, equipment, and practices. Authorised or technically competent to operate and issue electrical safety certificates for 11kV systems (Senior Authorised Person level). In-depth knowledge of industrial electrical and control systems including: Generation and Distribution Motor Control Centres and Variable Speed Drives Instrumentation, PLCs, and Distributed Control Systems (DCS). NEBOSH Safety Certificate desirable but not essential. If this Electrical Engineering Manager sounds like a role that would match your skills and experience, we would love to hear from you and look forward to discussing your application in more detail. This is a full time permanent role paying £60,000 - £74,000 dependent upon experience. Shift details: Permanent , Monday Friday days working 8.30am 4pm There is also a commitment to working 1 in 8 weekends with time given off during the week on these occasions. Anne Corder Recruitment Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers. By applying you will be registered as a candidate with Anne Corder Recruitment Ltd, your personal data may be added to our database as part of the application process. Our privacy policy is available on our website and explains how we will use your data. Your details will be reviewed by one of our Recruitment Partners and we will contact you again within 5 working days if your application is to be progressed further. Please note that we are not able to provide support with visa sponsorships and all applicants must be based in the UK and hold the valid right to work in the UK. INDEEDENG
Oct 09, 2025
Full time
Are you a strong leader who is keen to make a real difference in a busy engineering team? If so, this could be fit your skills perfectly. Working with a nationally recognised engineering brand this Electrical Engineering Manager provides a varied mix of work across historical industrial machinery through to state of the art, 2 weeks old technology with millions of pounds spent recently upgrading their machines. This role is paying one of the highest packages in the geographical area and would suit someone who is hardworking and career minded. Salary : £60,000 - £74,000 PA Title : Electrical Engineering Manager Location : Bury St Edmunds Electrical Engineering Manager s Key Responsibilities: Act as the site Subject Matter Expert for all electrical engineering activities and lead control and instrumentation experts to enhance safety, reliability, and production performance. Coach and support Autonomous Production Unit (APU) teams to maintain technical integrity and ensure systems meet required standards. Implement and manage Electrical and Control codes of practice and procedures. Serve as the Responsible Person for managing potentially explosive atmospheres (DSEAR). Line manage and develop the Electrical and Instrument Support Manager, fostering learning, mentoring, and succession planning. Lead and motivate the Control Engineering Team, ensuring engagement, capability, and efficiency. Maintain a five-year plan for managing electrical and control assets. Skills & Experience Required as the Electrical Engineering Manager: HND or Degree in Electrical Engineering (or equivalent). Working knowledge of British Standards for engineering plant, equipment, and practices. Authorised or technically competent to operate and issue electrical safety certificates for 11kV systems (Senior Authorised Person level). In-depth knowledge of industrial electrical and control systems including: Generation and Distribution Motor Control Centres and Variable Speed Drives Instrumentation, PLCs, and Distributed Control Systems (DCS). NEBOSH Safety Certificate desirable but not essential. If this Electrical Engineering Manager sounds like a role that would match your skills and experience, we would love to hear from you and look forward to discussing your application in more detail. This is a full time permanent role paying £60,000 - £74,000 dependent upon experience. Shift details: Permanent , Monday Friday days working 8.30am 4pm There is also a commitment to working 1 in 8 weekends with time given off during the week on these occasions. Anne Corder Recruitment Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers. By applying you will be registered as a candidate with Anne Corder Recruitment Ltd, your personal data may be added to our database as part of the application process. Our privacy policy is available on our website and explains how we will use your data. Your details will be reviewed by one of our Recruitment Partners and we will contact you again within 5 working days if your application is to be progressed further. Please note that we are not able to provide support with visa sponsorships and all applicants must be based in the UK and hold the valid right to work in the UK. INDEEDENG
Maintenance Engineer Cambridge Area 32,000 - 42,000 To lead both proactive and reactive/breakdown maintenance across all Our Clients sites, focusing on reducing the incident of breakdowns and improving production facilities. Ensuring that machinery and equipment operates smoothly and reliably. THE ROLE The role also takes ownership of all electrical and mechanical work, ensuring compliance with regulations and standards. It includes leading agreed facilities projects such as refits, upgrades, and equipment installations, managing work from planning to completion, including snagging and testing. The post ensures all maintenance and project work is carried out safely, efficiently, and reliably to support smooth operations. Key Responsibilities Safety and Compliance - following the rules and regulations related to health and safety in the workplace. Among these are wearing the appropriate Personal Protective Equipment (PPE), using safe work practices, and understanding emergency procedures. Equipment Inspection and Troubleshooting: - to identify whether work equipment can be operated, adjusted, and maintained safely. Repair and Maintenance - restoration work when an asset breaks, gets damaged, or stops working. Carrying out routine activities and/or corrective or preventive repair done on assets to prevent damage and prolong the life expectancy. Emergency Repairs - ensuring response to emergency calls for equipment breakdowns and prioritisation of urgent repairs to minimize downtime. Preventive Maintenance - plan and implement a rigorous machine maintenance program, which meets audit and legal compliance regulations. Covering the routine maintenance of equipment and assets to keep them running and prevent any costly unplanned downtime from unexpected equipment failure. Electrical & Mechanical Work - provide technical support on aspects of M&E compliance, statutory legislation, standards validation, project snagging, equipment factory acceptance testing, and M&E site control. Documentation and Reporting - maintenance of detailed records of maintenance work, including parts used and hours worked. Generating reports for management and supervisors. Continuous Learning - stay updated on industry trends, new technologies, and best practices. Attending training sessions and workshops as needed. Facilities Project Management - lead agreed facilities projects, including refits, upgrades, and equipment installations. Manage all stages from planning to completion, ensuring snagging, testing, and handover are completed safely, on time, and to the required standard. General responsibilities: Health & Safety Responsibilities All employees are responsible for adhering to health and safety procedures and guidelines, ensuring a safe working environment for themselves and others. Any accidents, near misses, or concerns must be reported to the Health & Safety Manager and/or their line manager immediately. Quality Responsibilities Quality is the responsibility of every individual within the company. Each employee contributes to Our Clients quality objectives and plays a key role in fostering a quality-focused culture. It is essential to uphold high standards to ensure that customer needs and expectations are fully met. Person Specification Skills: Knowledge of PUWER regulations Mechanical / Electrical Biased Engineer Interacting with suppliers, overseeing a team and managing budgets Ability to understand a variety of engineering procedures and functions Team-working skills to liaise and work cooperatively with individuals at all levels Negotiation skills and the ability to persuade others Excellent diagnostic and problem-solving skills Ability to work under pressure Interpersonal and people-management skills Maintenance Engineer / Service Engineer / PUWER Regulations / PLC / Fault Finding / Mechanical Technician / Service Engineer / CNC Maintenance / CNC Engineer / CNC service Engineer Call Settings Override To From Record Yes No Always use these settings
Oct 07, 2025
Full time
Maintenance Engineer Cambridge Area 32,000 - 42,000 To lead both proactive and reactive/breakdown maintenance across all Our Clients sites, focusing on reducing the incident of breakdowns and improving production facilities. Ensuring that machinery and equipment operates smoothly and reliably. THE ROLE The role also takes ownership of all electrical and mechanical work, ensuring compliance with regulations and standards. It includes leading agreed facilities projects such as refits, upgrades, and equipment installations, managing work from planning to completion, including snagging and testing. The post ensures all maintenance and project work is carried out safely, efficiently, and reliably to support smooth operations. Key Responsibilities Safety and Compliance - following the rules and regulations related to health and safety in the workplace. Among these are wearing the appropriate Personal Protective Equipment (PPE), using safe work practices, and understanding emergency procedures. Equipment Inspection and Troubleshooting: - to identify whether work equipment can be operated, adjusted, and maintained safely. Repair and Maintenance - restoration work when an asset breaks, gets damaged, or stops working. Carrying out routine activities and/or corrective or preventive repair done on assets to prevent damage and prolong the life expectancy. Emergency Repairs - ensuring response to emergency calls for equipment breakdowns and prioritisation of urgent repairs to minimize downtime. Preventive Maintenance - plan and implement a rigorous machine maintenance program, which meets audit and legal compliance regulations. Covering the routine maintenance of equipment and assets to keep them running and prevent any costly unplanned downtime from unexpected equipment failure. Electrical & Mechanical Work - provide technical support on aspects of M&E compliance, statutory legislation, standards validation, project snagging, equipment factory acceptance testing, and M&E site control. Documentation and Reporting - maintenance of detailed records of maintenance work, including parts used and hours worked. Generating reports for management and supervisors. Continuous Learning - stay updated on industry trends, new technologies, and best practices. Attending training sessions and workshops as needed. Facilities Project Management - lead agreed facilities projects, including refits, upgrades, and equipment installations. Manage all stages from planning to completion, ensuring snagging, testing, and handover are completed safely, on time, and to the required standard. General responsibilities: Health & Safety Responsibilities All employees are responsible for adhering to health and safety procedures and guidelines, ensuring a safe working environment for themselves and others. Any accidents, near misses, or concerns must be reported to the Health & Safety Manager and/or their line manager immediately. Quality Responsibilities Quality is the responsibility of every individual within the company. Each employee contributes to Our Clients quality objectives and plays a key role in fostering a quality-focused culture. It is essential to uphold high standards to ensure that customer needs and expectations are fully met. Person Specification Skills: Knowledge of PUWER regulations Mechanical / Electrical Biased Engineer Interacting with suppliers, overseeing a team and managing budgets Ability to understand a variety of engineering procedures and functions Team-working skills to liaise and work cooperatively with individuals at all levels Negotiation skills and the ability to persuade others Excellent diagnostic and problem-solving skills Ability to work under pressure Interpersonal and people-management skills Maintenance Engineer / Service Engineer / PUWER Regulations / PLC / Fault Finding / Mechanical Technician / Service Engineer / CNC Maintenance / CNC Engineer / CNC service Engineer Call Settings Override To From Record Yes No Always use these settings
Job Title: Gear Cutter Location: Barton Under Needwood, Staffordshire Duration: 3 months min Hours: 7am-4pm Mon to Thurs, 7am-1pm Fri Our engineering client based in Barton Under Needwood require and experience Gear Cutter, for a minimum of 3 months work. Job Purpose The role of the Gear Cutter is to cut gear teeth to drawing specification. Key Responsibilities & Activities (Details of the activities the team member will execute, monitor, report on, and manage) Use of a wide range of measuring equipment to check components. Writing and interpreting instructions and procedures to assemble equipment and products accurately. Obtaining relevant information from the relevant sources Controlling machines and processes. Performing inspections of equipment, structures, materials, and products. Analysing information and finding the best solutions to problems. Maintaining clear and honest communication at all times. Keeping the work environment safe. Learning and applying the latest relevant knowledge to the work Mentor trainees / apprentices when applicable Work to and support all relevant 5S activities. Report any near misses Ensure that waste is disposed of in the correct manner. Report any issues or problems with jobs to the line manager. Adhere at all times to the company's Health, Safety & Environmental instructions, and requirements. Take on any other reasonable responsibilities or tasks that are within the employee's skills and abilities. Background & Experience: Minimum 1-year experience in relevant rail or automotive industry. Be practical mechanically oriented. Possess good problem-solving skills. Recognised engineering qualification required. Self-motivated Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
Oct 06, 2025
Contractor
Job Title: Gear Cutter Location: Barton Under Needwood, Staffordshire Duration: 3 months min Hours: 7am-4pm Mon to Thurs, 7am-1pm Fri Our engineering client based in Barton Under Needwood require and experience Gear Cutter, for a minimum of 3 months work. Job Purpose The role of the Gear Cutter is to cut gear teeth to drawing specification. Key Responsibilities & Activities (Details of the activities the team member will execute, monitor, report on, and manage) Use of a wide range of measuring equipment to check components. Writing and interpreting instructions and procedures to assemble equipment and products accurately. Obtaining relevant information from the relevant sources Controlling machines and processes. Performing inspections of equipment, structures, materials, and products. Analysing information and finding the best solutions to problems. Maintaining clear and honest communication at all times. Keeping the work environment safe. Learning and applying the latest relevant knowledge to the work Mentor trainees / apprentices when applicable Work to and support all relevant 5S activities. Report any near misses Ensure that waste is disposed of in the correct manner. Report any issues or problems with jobs to the line manager. Adhere at all times to the company's Health, Safety & Environmental instructions, and requirements. Take on any other reasonable responsibilities or tasks that are within the employee's skills and abilities. Background & Experience: Minimum 1-year experience in relevant rail or automotive industry. Be practical mechanically oriented. Possess good problem-solving skills. Recognised engineering qualification required. Self-motivated Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
Morson Technical Services are currently seeking a Aircraft Workshops Supervisor to be based permanently at RNAS Yeovilton within the Wildcat Base Maintenance Bay. ABOUT Our Base Maintenance Bays team are responsible for repairing and rectifying components to support the Wildcat and Merlin squadrons at RNAS Yeovilton. Comprising mechanical workshops, spray bay, avionics workshops, sheet metal and machine shop the teams provide spares to maintain the health of the Fleet. Our Morson employees at RNAS Yeovilton are supported by our onsite HR Team, we help you explore your passions and unlock your true potential. Our people are the heart of our business, and we provide the learning and the tools to help you take your career to the next level. PURPOSE/ REQUIREMENTS To carry out the role of Supervisor in the Wildcat Base Maintenance Bays (WBMB) or at other Units as directed. To hold authorisations to the minimum level required by WMS, this is to include second signature within own trade group as detailed in OP 1103 and IAW individual Record of Engineering Authorisations (REA). Maintain technical currency and authorisation through the training program and reading disseminated information. To carry out tasks in a supervisory role within the WBMB or at other Units as directed. To supervise the servicing, repair, modification, functional testing, general husbandry and rectification of the components maintained within WBMB or at other Units as directed, co-ordinating the maintenance requirements for such equipment, prioritising the work accordingly in liaison with the WIST Front desk and Workshop Controller. Investigating repair solutions for equipment/components where no repair exists. To liaise with Squadrons, Tech Support Cells and other departments to ensure efficient repair of components. Supervise the custody and accounting of all Bay stores, organising issues and returns in liaison with the WMS Storekeeper. Hold or act as Deputy AinU holder as required. To carry out fault diagnosis and examination using precision instruments and test equipment. Carry out maintenance within trade in accordance with published procedures and instructions. To supervise the custody and accounting of all Bay stores and to organise issues and returns. To have a working knowledge of the Health and Safety at Work Act, including COSHH. Completing GOLDesp procedures IAW Wildcat Maintenance Support (WMS OP 408) and JAP(D) 100A-0409-01 series of publications. Ensure correct tool control procedures (WMS OP 502) are adhered to when carrying out maintenance during the course of the working day. Supervision of Technicians. Carrying out independent inspections where authorised (WMS OP 451). To specify the extent of the independent inspections for correct assembly and functional test in source trade as required. Carry out Workshop secondary support roles as required. Any other Aircraft support related tasks as directed by the appropriate Manager/ Workshop Controller KNOWLEDGE SKILLS AND EXPERIENCE Must have served an aeronautical engineering apprenticeship or Service equivalent trade training. Ideally must have had a minimum of 4 years Military Aircraft Engineering experience, including 1 year in a supervisory position or civilian equivalent. Must possess a thorough knowledge of UK military aircraft documentation procedures. Have a detailed knowledge of GOLDesp to Custodian level and have competency to hold access level 5 Ability to work to aircraft/component drawings using specialist skills i.e. hydraulic schematics. A working knowledge of COSHH and Risk Assessments. If this is of interest please apply today or alternatively contact Oliver Beaumont directly on (phone number removed) or (url removed)
Oct 06, 2025
Full time
Morson Technical Services are currently seeking a Aircraft Workshops Supervisor to be based permanently at RNAS Yeovilton within the Wildcat Base Maintenance Bay. ABOUT Our Base Maintenance Bays team are responsible for repairing and rectifying components to support the Wildcat and Merlin squadrons at RNAS Yeovilton. Comprising mechanical workshops, spray bay, avionics workshops, sheet metal and machine shop the teams provide spares to maintain the health of the Fleet. Our Morson employees at RNAS Yeovilton are supported by our onsite HR Team, we help you explore your passions and unlock your true potential. Our people are the heart of our business, and we provide the learning and the tools to help you take your career to the next level. PURPOSE/ REQUIREMENTS To carry out the role of Supervisor in the Wildcat Base Maintenance Bays (WBMB) or at other Units as directed. To hold authorisations to the minimum level required by WMS, this is to include second signature within own trade group as detailed in OP 1103 and IAW individual Record of Engineering Authorisations (REA). Maintain technical currency and authorisation through the training program and reading disseminated information. To carry out tasks in a supervisory role within the WBMB or at other Units as directed. To supervise the servicing, repair, modification, functional testing, general husbandry and rectification of the components maintained within WBMB or at other Units as directed, co-ordinating the maintenance requirements for such equipment, prioritising the work accordingly in liaison with the WIST Front desk and Workshop Controller. Investigating repair solutions for equipment/components where no repair exists. To liaise with Squadrons, Tech Support Cells and other departments to ensure efficient repair of components. Supervise the custody and accounting of all Bay stores, organising issues and returns in liaison with the WMS Storekeeper. Hold or act as Deputy AinU holder as required. To carry out fault diagnosis and examination using precision instruments and test equipment. Carry out maintenance within trade in accordance with published procedures and instructions. To supervise the custody and accounting of all Bay stores and to organise issues and returns. To have a working knowledge of the Health and Safety at Work Act, including COSHH. Completing GOLDesp procedures IAW Wildcat Maintenance Support (WMS OP 408) and JAP(D) 100A-0409-01 series of publications. Ensure correct tool control procedures (WMS OP 502) are adhered to when carrying out maintenance during the course of the working day. Supervision of Technicians. Carrying out independent inspections where authorised (WMS OP 451). To specify the extent of the independent inspections for correct assembly and functional test in source trade as required. Carry out Workshop secondary support roles as required. Any other Aircraft support related tasks as directed by the appropriate Manager/ Workshop Controller KNOWLEDGE SKILLS AND EXPERIENCE Must have served an aeronautical engineering apprenticeship or Service equivalent trade training. Ideally must have had a minimum of 4 years Military Aircraft Engineering experience, including 1 year in a supervisory position or civilian equivalent. Must possess a thorough knowledge of UK military aircraft documentation procedures. Have a detailed knowledge of GOLDesp to Custodian level and have competency to hold access level 5 Ability to work to aircraft/component drawings using specialist skills i.e. hydraulic schematics. A working knowledge of COSHH and Risk Assessments. If this is of interest please apply today or alternatively contact Oliver Beaumont directly on (phone number removed) or (url removed)
Maintenance Engineer We're proud to be Bakkavor Salary: £57,062 per annum Benefits: Highly competitive rewards package, life assurance, and excellent career progression prospects across the Bakkavor group Location: Holbeach Ways of Working: Site Based Shift: 3on 3off shift pattern, 18:00 - 06:00 Contract Type: Permanent Why join us? We're ready for anything. We thrive on challenge and change. The undeniable pressure and pace of our 24/7 operation keeps us on our toes and offers a variety of career pathways and options to explore and pursue. We encourage everyone to work hard, push further and show resilience. And it's exciting. Because only by mentoring and role modelling our success and innovation, will we continue to diversify, grow as individuals and succeed together. What we do. This fantastic opportunity will be based at our Bakkavor Pizza site in Holbeach St Marks, Lincolnshire. The site specialises in making chilled pizzas and is 11 miles from Spalding, 13.5 miles from Boston, 18 miles from Wisbech, 23 miles from King's Lynn and 29 miles from Peterborough. About the role. We have a fantastic opportunity for a Maintenance Engineer to join our expanding team and site. The Maintenance Engineer will conduct planned and predictive maintenance to prevent issues occurring. Your role will lead or support the operational teams with machinery change overs and set ups. Working with other teams, you will contribute to technical performance reviews and continuous improvement activities. Our Maintenance Engineers work as part of a team or standalone, depending on the task. The role reports to the Engineering Teams Manager . Role Accountabilities: Conduct planned maintenance of processing and packaging assets. Conduct predictive maintenance of food processing and packaging assets (condition-based monitoring). Respond to breakdowns. Conduct reactive maintenance or corrective actions to resolve deviation. Identify faults (electrical, mechanical, instrumentation, automation, and pneumatics) and action as required. Lead or support operational teams with machinery change overs and set ups. Manufacture and repair component parts for processing and packaging assets. Contribute to continuous improvement projects to optimise assets or processes. About you Engineering apprenticeship (C&G / EAL NVQ Level 3 / 4 or OAL FDEM Diploma) Current Edition of IET Wiring Regulations (C&G Level 3, achieve within 12 months). Application of Safety, Health and Environmental legislation and procedures Planning works and writing reports. Verify assets meet performance criteria after work. Reading and adhering to site SOPs. CMMS experience (achieve within 12 months). Electrical bias Experience in the following would be advantageous - Mechanical principles, F&D assets, welding, machining, turning, hydraulic, pneumatic & thermodynamics systems and / or, electrical principals, motors, motor control circuits, motion control, encoders, PLCs, sensors. What you'll receive. As an equal opportunity employer, we're committed to providing a safe and rewarding environment for you to thrive in. This is why we work hard to deliver benefits, rewards and wellbeing offerings that are important to you. You'll enjoy: Life Assurance (1 x salary) 23 days holiday Staff Shop Stakeholder Pension Scheme MyBargains Discount Platform Personal Accident Insurance Free Independent Mortgage Advice Employee Assistance Programme A Range of voluntary benefits (holiday purchase scheme, additional life assurance, dental & hospital cash plans) Discounted tutoring for children Access to financial learning tools and affordable loans via your salary Private Medical Insurance (after 5 years service) Free Car parking Plus, a commitment to your wellbeing that includes emotional, physical and financial support services delivered by our fantastic team of wellbeing champions. Proud to be Bakkavor. We're proud to be the market leader in the UK fresh prepared food industry. We're proud to supply meals, salads, desserts, pizza and bread to leading grocery retailers including Tesco, M&S, Sainsbury's and Waitrose. We're driven by the hard work and passion of our people and are delighted to offer a wide range of careers across our business - come and join our dedicated Bakkavor team! At Bakkavor, we are committed to building an inclusive workplace where everyone can thrive, and we believe that diversity makes us stronger. We welcome and encourage applications from all backgrounds and ensure fair, transparent recruitment practices. Learn more about our commitment in our Inclusion and Diversity Policy ( Inclusion & Diversity Policy ). Find out more and apply.
Oct 04, 2025
Full time
Maintenance Engineer We're proud to be Bakkavor Salary: £57,062 per annum Benefits: Highly competitive rewards package, life assurance, and excellent career progression prospects across the Bakkavor group Location: Holbeach Ways of Working: Site Based Shift: 3on 3off shift pattern, 18:00 - 06:00 Contract Type: Permanent Why join us? We're ready for anything. We thrive on challenge and change. The undeniable pressure and pace of our 24/7 operation keeps us on our toes and offers a variety of career pathways and options to explore and pursue. We encourage everyone to work hard, push further and show resilience. And it's exciting. Because only by mentoring and role modelling our success and innovation, will we continue to diversify, grow as individuals and succeed together. What we do. This fantastic opportunity will be based at our Bakkavor Pizza site in Holbeach St Marks, Lincolnshire. The site specialises in making chilled pizzas and is 11 miles from Spalding, 13.5 miles from Boston, 18 miles from Wisbech, 23 miles from King's Lynn and 29 miles from Peterborough. About the role. We have a fantastic opportunity for a Maintenance Engineer to join our expanding team and site. The Maintenance Engineer will conduct planned and predictive maintenance to prevent issues occurring. Your role will lead or support the operational teams with machinery change overs and set ups. Working with other teams, you will contribute to technical performance reviews and continuous improvement activities. Our Maintenance Engineers work as part of a team or standalone, depending on the task. The role reports to the Engineering Teams Manager . Role Accountabilities: Conduct planned maintenance of processing and packaging assets. Conduct predictive maintenance of food processing and packaging assets (condition-based monitoring). Respond to breakdowns. Conduct reactive maintenance or corrective actions to resolve deviation. Identify faults (electrical, mechanical, instrumentation, automation, and pneumatics) and action as required. Lead or support operational teams with machinery change overs and set ups. Manufacture and repair component parts for processing and packaging assets. Contribute to continuous improvement projects to optimise assets or processes. About you Engineering apprenticeship (C&G / EAL NVQ Level 3 / 4 or OAL FDEM Diploma) Current Edition of IET Wiring Regulations (C&G Level 3, achieve within 12 months). Application of Safety, Health and Environmental legislation and procedures Planning works and writing reports. Verify assets meet performance criteria after work. Reading and adhering to site SOPs. CMMS experience (achieve within 12 months). Electrical bias Experience in the following would be advantageous - Mechanical principles, F&D assets, welding, machining, turning, hydraulic, pneumatic & thermodynamics systems and / or, electrical principals, motors, motor control circuits, motion control, encoders, PLCs, sensors. What you'll receive. As an equal opportunity employer, we're committed to providing a safe and rewarding environment for you to thrive in. This is why we work hard to deliver benefits, rewards and wellbeing offerings that are important to you. You'll enjoy: Life Assurance (1 x salary) 23 days holiday Staff Shop Stakeholder Pension Scheme MyBargains Discount Platform Personal Accident Insurance Free Independent Mortgage Advice Employee Assistance Programme A Range of voluntary benefits (holiday purchase scheme, additional life assurance, dental & hospital cash plans) Discounted tutoring for children Access to financial learning tools and affordable loans via your salary Private Medical Insurance (after 5 years service) Free Car parking Plus, a commitment to your wellbeing that includes emotional, physical and financial support services delivered by our fantastic team of wellbeing champions. Proud to be Bakkavor. We're proud to be the market leader in the UK fresh prepared food industry. We're proud to supply meals, salads, desserts, pizza and bread to leading grocery retailers including Tesco, M&S, Sainsbury's and Waitrose. We're driven by the hard work and passion of our people and are delighted to offer a wide range of careers across our business - come and join our dedicated Bakkavor team! At Bakkavor, we are committed to building an inclusive workplace where everyone can thrive, and we believe that diversity makes us stronger. We welcome and encourage applications from all backgrounds and ensure fair, transparent recruitment practices. Learn more about our commitment in our Inclusion and Diversity Policy ( Inclusion & Diversity Policy ). Find out more and apply.
