A growing engineering company based in Surrey is looking for an Embedded Software Engineer to join its development team. The organisation works on complex embedded systems used in advanced engineering products and is looking for an experienced engineer to contribute to ongoing development projects. The Role You will join an established engineering team responsible for developing embedded software for microcontroller-based systems. The role will involve a combination of new development, improving existing firmware and debugging complex embedded systems. You will work closely with other engineers across software, electronics and systems to support product development. Key Responsibilities Develop embedded software using C Work with microcontroller-based systems Implement and maintain low-level drivers Contribute to new product development Debug and enhance existing embedded software Support testing and verification activities Collaborate with multidisciplinary engineering teams Experience Required Around 5+ years experience in embedded software development Strong experience with Embedded C Experience working with microcontrollers Experience developing low-level drivers Background in automotive, aerospace or other safety-critical industries Desirable Experience AUTOSAR Functional safety exposure (e.g. ISO 26262) Knowledge of MISRA standards Experience working close to hardware For more information, please apply to this role ASAP.
Apr 04, 2026
Full time
A growing engineering company based in Surrey is looking for an Embedded Software Engineer to join its development team. The organisation works on complex embedded systems used in advanced engineering products and is looking for an experienced engineer to contribute to ongoing development projects. The Role You will join an established engineering team responsible for developing embedded software for microcontroller-based systems. The role will involve a combination of new development, improving existing firmware and debugging complex embedded systems. You will work closely with other engineers across software, electronics and systems to support product development. Key Responsibilities Develop embedded software using C Work with microcontroller-based systems Implement and maintain low-level drivers Contribute to new product development Debug and enhance existing embedded software Support testing and verification activities Collaborate with multidisciplinary engineering teams Experience Required Around 5+ years experience in embedded software development Strong experience with Embedded C Experience working with microcontrollers Experience developing low-level drivers Background in automotive, aerospace or other safety-critical industries Desirable Experience AUTOSAR Functional safety exposure (e.g. ISO 26262) Knowledge of MISRA standards Experience working close to hardware For more information, please apply to this role ASAP.
A great opportunity for an Electrical Design Engineers who has experience of machinery control systems. Flexible hours and hybrid working available! Join one of the UK's largest independent turnkey solutions providers, based in the West Midlands. A full service provider offering flexible solutions to the power generation and nuclear industries are seeking talented individuals to join their expanding team. Electrical Design Engineers £35000 - £60000 + Flexi-Time, Hybrid, Early Friday Finish West Midlands Ref: 24909 Electrical Design Engineers - The Role: Produce high quality, detailed control panel designs including the integration of PLC s, HMI s and Drive Systems Produce accurate documentation to support designs Complete projects within agreed timescales and budgets Produce technical/functional specifications Develop control systems from concept through to final design, installation & commissioning Electrical Design Engineers - The Person: Proficient in the use of an electrical CAD package such as AutoCAD / Promis-e, EPlan, RSWire Strong interpersonal and communication skills with analytical, design and problem solving capabilities Previous experience of IEC61508 standards advantageous HNC qualified Familiarity of working within a control panel build facility would be highly advantageous A hybrid position, located in West Midlands, this role would be commutable from Telford, Wolverhampton, Dudley, Birmingham, Walsall and surrounding areas. Role would be suitable for Engineers with experience of any electrical design package including Autocad, RSView, Promis-e or Eplan. Engineers applying for this position must live in the UK and be eligible to gain security clearance. For further information please contact Sharon Hill AE1
Apr 03, 2026
Full time
A great opportunity for an Electrical Design Engineers who has experience of machinery control systems. Flexible hours and hybrid working available! Join one of the UK's largest independent turnkey solutions providers, based in the West Midlands. A full service provider offering flexible solutions to the power generation and nuclear industries are seeking talented individuals to join their expanding team. Electrical Design Engineers £35000 - £60000 + Flexi-Time, Hybrid, Early Friday Finish West Midlands Ref: 24909 Electrical Design Engineers - The Role: Produce high quality, detailed control panel designs including the integration of PLC s, HMI s and Drive Systems Produce accurate documentation to support designs Complete projects within agreed timescales and budgets Produce technical/functional specifications Develop control systems from concept through to final design, installation & commissioning Electrical Design Engineers - The Person: Proficient in the use of an electrical CAD package such as AutoCAD / Promis-e, EPlan, RSWire Strong interpersonal and communication skills with analytical, design and problem solving capabilities Previous experience of IEC61508 standards advantageous HNC qualified Familiarity of working within a control panel build facility would be highly advantageous A hybrid position, located in West Midlands, this role would be commutable from Telford, Wolverhampton, Dudley, Birmingham, Walsall and surrounding areas. Role would be suitable for Engineers with experience of any electrical design package including Autocad, RSView, Promis-e or Eplan. Engineers applying for this position must live in the UK and be eligible to gain security clearance. For further information please contact Sharon Hill AE1
An excellent opportunity has arisen for an experienced Fire & Security Engineer to join one of the country's leading facilities management companies. This will be a mobile role working on a supermarket contract. Ideal candidate location - Maidstone or any of the below sites: Ashford, Swanley, Broadstairs, Canterbury, Chatham, Gillingham, St Leonards on Sea, Maidstone, Eastbourne, Ramsgate, Sittingbourne, Rochester Key Responsibilities: Servicing and maintenance of Fire Alarms, Intruder Alarms, CCTV Systems and Access Control. Providing callout response for the client as per callout rota. Representing the company in a way which ensures customer satisfaction and professionalism. Taking a pro-active approach to client liaison and ensuring that concerns are dealt with or relayed to management as necessary. Ensuring that administration requirements are actioned on time and all necessary documentation and records are maintained accurately. Staying in compliance with Company Policy & Health and Safety legislation. Installing and servicing fire and security systems. Experience/skills required: Experience with Access control, CCTV, Intruder and Fire alarm systems Full, valid UK driving licence Experience in Notifier by Honeywell, Paxton Systems, and designing security systems would be an advantage Thorough understanding of relevant fire and intruder alarm standards CSCS/ ECS/ IPAF desirable Excellent customer service skills Good interpersonal skills and the ability to work as part of a team A genuine interest in your work with an enthusiasm and willingness to learn. Exceptional knowledge within the security sector. Package: Salary: 35946 basic + 2535 in standby payments = 38,481 total Travel time paid after first 30m at overtime rate Overtime Call Out - 1 in 4 weeks Private Health Care 33 days holiday inclusive of banks Life Insurance Company vehicle with private use Schedule: Monday - Friday 42.5 hrs per week 1 week in 4 standby Licence/Certification: UK Driving Licence (required) Electrical Competency Qualification (NVQ/City & Guilds) Fire and Security Engineer - Maidstone Fire & Security Engineer - Kent Fire and Security Engineer Fire and Security Engineer Fire and Security Engineer Fire and Security Engineer Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business.
Apr 03, 2026
Contractor
An excellent opportunity has arisen for an experienced Fire & Security Engineer to join one of the country's leading facilities management companies. This will be a mobile role working on a supermarket contract. Ideal candidate location - Maidstone or any of the below sites: Ashford, Swanley, Broadstairs, Canterbury, Chatham, Gillingham, St Leonards on Sea, Maidstone, Eastbourne, Ramsgate, Sittingbourne, Rochester Key Responsibilities: Servicing and maintenance of Fire Alarms, Intruder Alarms, CCTV Systems and Access Control. Providing callout response for the client as per callout rota. Representing the company in a way which ensures customer satisfaction and professionalism. Taking a pro-active approach to client liaison and ensuring that concerns are dealt with or relayed to management as necessary. Ensuring that administration requirements are actioned on time and all necessary documentation and records are maintained accurately. Staying in compliance with Company Policy & Health and Safety legislation. Installing and servicing fire and security systems. Experience/skills required: Experience with Access control, CCTV, Intruder and Fire alarm systems Full, valid UK driving licence Experience in Notifier by Honeywell, Paxton Systems, and designing security systems would be an advantage Thorough understanding of relevant fire and intruder alarm standards CSCS/ ECS/ IPAF desirable Excellent customer service skills Good interpersonal skills and the ability to work as part of a team A genuine interest in your work with an enthusiasm and willingness to learn. Exceptional knowledge within the security sector. Package: Salary: 35946 basic + 2535 in standby payments = 38,481 total Travel time paid after first 30m at overtime rate Overtime Call Out - 1 in 4 weeks Private Health Care 33 days holiday inclusive of banks Life Insurance Company vehicle with private use Schedule: Monday - Friday 42.5 hrs per week 1 week in 4 standby Licence/Certification: UK Driving Licence (required) Electrical Competency Qualification (NVQ/City & Guilds) Fire and Security Engineer - Maidstone Fire & Security Engineer - Kent Fire and Security Engineer Fire and Security Engineer Fire and Security Engineer Fire and Security Engineer Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business.
Fire & Security Engineer - Bournemouth Location: Bournemouth & Surrounding Areas Salary: 35,000 - 40,000 + Overtime & Benefits Contract: Full-Time, Permanent We're seeking an experienced Fire & Security Engineer to join a growing, well-established company covering Bournemouth and the surrounding areas . This role offers a competitive salary, great benefits, and genuine career progression opportunities. What's in it for you? Salary: 35,000 - 40,000 (DOE) Overtime opportunities to boost your earnings Company vehicle & fuel card provided Paid travel time (minus the first 30 minutes) Ongoing training & career development Supportive and professional working environment Your Responsibilities: Install, service, and commission fire alarms, CCTV, access control, and intruder alarm systems Diagnose and repair faults effectively Deliver excellent customer service and technical support Work independently while collaborating with the wider team What We're Looking For: Proven experience with fire alarms, CCTV, access control, and intruder alarms Strong fault-finding and problem-solving skills Full UK driving licence required Professional and customer-focused attitude How to Apply: If you're an experienced Fire & Security Engineer looking for your next challenge, we want to hear from you! You Might Be: Fire & Security Engineer, Fire Alarm Engineer, Security Systems Engineer, Service Engineer, CCTV Engineer, Intruder Alarm Engineer, Electrical Engineer, Maintenance Electrician, or a Fire Engineer seeking a new challenge. INDAV
Apr 03, 2026
Full time
Fire & Security Engineer - Bournemouth Location: Bournemouth & Surrounding Areas Salary: 35,000 - 40,000 + Overtime & Benefits Contract: Full-Time, Permanent We're seeking an experienced Fire & Security Engineer to join a growing, well-established company covering Bournemouth and the surrounding areas . This role offers a competitive salary, great benefits, and genuine career progression opportunities. What's in it for you? Salary: 35,000 - 40,000 (DOE) Overtime opportunities to boost your earnings Company vehicle & fuel card provided Paid travel time (minus the first 30 minutes) Ongoing training & career development Supportive and professional working environment Your Responsibilities: Install, service, and commission fire alarms, CCTV, access control, and intruder alarm systems Diagnose and repair faults effectively Deliver excellent customer service and technical support Work independently while collaborating with the wider team What We're Looking For: Proven experience with fire alarms, CCTV, access control, and intruder alarms Strong fault-finding and problem-solving skills Full UK driving licence required Professional and customer-focused attitude How to Apply: If you're an experienced Fire & Security Engineer looking for your next challenge, we want to hear from you! You Might Be: Fire & Security Engineer, Fire Alarm Engineer, Security Systems Engineer, Service Engineer, CCTV Engineer, Intruder Alarm Engineer, Electrical Engineer, Maintenance Electrician, or a Fire Engineer seeking a new challenge. INDAV
M&E Shift Engineer Commercial / Critical, Data centre Environment 52,000 per annum + employment package Romford, East London / Essex . We are actively recruiting for Mechanical Shift Engineers / Electrical Shift Engineer / M&E Shift Engineers to carry out electrical and mechanical planned preventative maintenance (PPM) and electrical and mechanical reactive maintenance duties across a large commercial / critical, data centre environment, based in Romford, East London. As the Electrical Shift Engineer, you will be responsible for carrying out electrical planned preventative maintenance (PPM) and reactive maintenance across critical electrical and mechanical (M&E) infrastructure including power distribution systems, transformers, LV/HV switchgear, UPS systems, generators, busbar systems, PDUs and associated control systems, pumps, air handling units (AHU), fan coil units (FCU), pressurisation units, CRAC / CRAH units, heat exchangers, cooling towers and chillers. Employment Package: Role: M&E Shift Engineer / Mechanical Shift Engineer / Electrical Shift Engineer Status: Permanent, PAYE Location: Romford, East London / Essex Salary: 52,000 Hours: Shift Pattern - days and nights, 12 hour shifts. Average of 14 shifts per month. Paid overtime available 25 days paid holiday pro rata to shift pattern Company pension, uniform, phone, private dental, private healthcare and other additional benefits provided. Requirements: Must be a qualified in either electrical or mechanical disipline. Must hold experience working as either an Electrical Maintenance Engineer / Mechanical Maintenance Engineer / HVAC Engineer within a commercial environment. Experience within a critical environment such as a Data Centre, Bank, Hospital etc or exposure to UPS systems or HV / LV Switchgear or CRAC / CRAH units is highly prefereable but not essential. If you are an M&E Shift Engineer/ Maintenance Engineer and would be interested in this position then please submit a full CV.
Apr 03, 2026
Full time
M&E Shift Engineer Commercial / Critical, Data centre Environment 52,000 per annum + employment package Romford, East London / Essex . We are actively recruiting for Mechanical Shift Engineers / Electrical Shift Engineer / M&E Shift Engineers to carry out electrical and mechanical planned preventative maintenance (PPM) and electrical and mechanical reactive maintenance duties across a large commercial / critical, data centre environment, based in Romford, East London. As the Electrical Shift Engineer, you will be responsible for carrying out electrical planned preventative maintenance (PPM) and reactive maintenance across critical electrical and mechanical (M&E) infrastructure including power distribution systems, transformers, LV/HV switchgear, UPS systems, generators, busbar systems, PDUs and associated control systems, pumps, air handling units (AHU), fan coil units (FCU), pressurisation units, CRAC / CRAH units, heat exchangers, cooling towers and chillers. Employment Package: Role: M&E Shift Engineer / Mechanical Shift Engineer / Electrical Shift Engineer Status: Permanent, PAYE Location: Romford, East London / Essex Salary: 52,000 Hours: Shift Pattern - days and nights, 12 hour shifts. Average of 14 shifts per month. Paid overtime available 25 days paid holiday pro rata to shift pattern Company pension, uniform, phone, private dental, private healthcare and other additional benefits provided. Requirements: Must be a qualified in either electrical or mechanical disipline. Must hold experience working as either an Electrical Maintenance Engineer / Mechanical Maintenance Engineer / HVAC Engineer within a commercial environment. Experience within a critical environment such as a Data Centre, Bank, Hospital etc or exposure to UPS systems or HV / LV Switchgear or CRAC / CRAH units is highly prefereable but not essential. If you are an M&E Shift Engineer/ Maintenance Engineer and would be interested in this position then please submit a full CV.
Fire & Security Business Development Manager Location: South & Central London / Surrey Salary: 50,000 - 65,000 DOE + package Company car / allowance included A well-established and highly respected Fire & Security systems provider is seeking an experienced Business Development Manager to support continued growth across South & Central London and Surrey. This is a key role combining management of existing client relationships with the ability to open new doors and win business across the Fire & Security sector. Role Overview The successful candidate will take ownership of a defined territory, inheriting an existing client base while actively developing new business opportunities. Working closely with internal technical and operational teams, you will provide compliant, value-driven Fire & Security solutions to a diverse client portfolio. This role suits a commercially astute individual who is comfortable operating both strategically and hands-on within a competitive London market. Key Responsibilities Manage and develop an existing portfolio of Fire & Security clients Identify, pursue, and secure new business opportunities Build strong relationships with: End users Facilities Management companies M&E contractors Consultants and specifiers Promote Fire & Security solutions including: Fire Detection & Alarm Systems CCTV Access Control Intruder Alarm Systems Integrated Fire & Security solutions Conduct client meetings, site visits, and surveys Prepare and present proposals, quotations, and tenders Work closely with project delivery teams to ensure smooth handover Maintain CRM data, sales forecasts, and pipeline reporting Stay informed on industry standards, regulations, and market trends Candidate Profile Proven experience in Fire & Security business development or sales Strong technical understanding of Fire and/or Electronic Security systems Experience managing existing accounts as well as generating new business Established contacts within South & Central London / Surrey advantageous Confident communicator with strong negotiation skills Self-motivated, organised, and results-driven YOU MAY BE A; Junior Fire & Security Engineer, Trainee Fire & Security Engineer, Fire Alarm Engineer, Security Engineer, Service Engineer, Installation Engineer, Electrical Engineer, Apprentice Engineer INDAV
Apr 03, 2026
Full time
Fire & Security Business Development Manager Location: South & Central London / Surrey Salary: 50,000 - 65,000 DOE + package Company car / allowance included A well-established and highly respected Fire & Security systems provider is seeking an experienced Business Development Manager to support continued growth across South & Central London and Surrey. This is a key role combining management of existing client relationships with the ability to open new doors and win business across the Fire & Security sector. Role Overview The successful candidate will take ownership of a defined territory, inheriting an existing client base while actively developing new business opportunities. Working closely with internal technical and operational teams, you will provide compliant, value-driven Fire & Security solutions to a diverse client portfolio. This role suits a commercially astute individual who is comfortable operating both strategically and hands-on within a competitive London market. Key Responsibilities Manage and develop an existing portfolio of Fire & Security clients Identify, pursue, and secure new business opportunities Build strong relationships with: End users Facilities Management companies M&E contractors Consultants and specifiers Promote Fire & Security solutions including: Fire Detection & Alarm Systems CCTV Access Control Intruder Alarm Systems Integrated Fire & Security solutions Conduct client meetings, site visits, and surveys Prepare and present proposals, quotations, and tenders Work closely with project delivery teams to ensure smooth handover Maintain CRM data, sales forecasts, and pipeline reporting Stay informed on industry standards, regulations, and market trends Candidate Profile Proven experience in Fire & Security business development or sales Strong technical understanding of Fire and/or Electronic Security systems Experience managing existing accounts as well as generating new business Established contacts within South & Central London / Surrey advantageous Confident communicator with strong negotiation skills Self-motivated, organised, and results-driven YOU MAY BE A; Junior Fire & Security Engineer, Trainee Fire & Security Engineer, Fire Alarm Engineer, Security Engineer, Service Engineer, Installation Engineer, Electrical Engineer, Apprentice Engineer INDAV
Commissioning Manager Birmingham, UK (Extensive Travel Required) Up to 75K per annum About the Role We are looking for an experienced Commissioning Manager to join a team delivering advanced automated warehouse solutions across the UK and internationally. This role will focus on leading the commissioning phase of high-performance automated storage and retrieval systems (ASRS) used in modern logistics and distribution environments. Although the role is based in Birmingham , the successful candidate will spend most of their time travelling to customer sites to oversee installation, commissioning, and system validation activities. Job Type: Permanent Salary: Up to 75,000 (Negotiable) Key Responsibilities Lead and manage the commissioning of automated warehouse systems on customer sites. Coordinate with engineering, software, and project management teams to ensure successful system integration. Plan and oversee system testing, validation, and performance verification prior to handover. Manage commissioning schedules, site activities, and technical resources. Troubleshoot and resolve technical issues during installation and startup . Ensure all activities meet quality, safety, and operational performance standards . Support customer training and final system handover . Requirements Proven experience in commissioning, installation, or deployment of automation or industrial systems . Strong technical troubleshooting and site coordination skills . Ability and willingness to travel extensively and work on customer sites. Experience within automation, robotics, material handling, conveyors, or warehouse systems . Strong communication and stakeholder management skills. Desirable Experience working with AutoStore automated warehouse systems (advantage but not essential). Background in automation, electrical, mechanical, or controls engineering . Experience commissioning large-scale logistics or warehouse automation projects . What's on Offer Permanent position within a growing warehouse automation sector. Salary up to 75,000 (negotiable depending on experience) . Opportunity to work on cutting-edge automated logistics systems . Exposure to multiple projects and customer environments . Career development within a rapidly expanding automation industry. Interested or know someone suitable? Send your CV to Luana Ferreira at (url removed) or call her on (phone number removed). Why work with Proactive? Proactive Global are an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive also offer a referral scheme for successful applicants - if you know anyone that could be suited to this position then please contact Proactive with their details and if they are placed by Proactive you will receive 250. T&Cs apply Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Apr 03, 2026
Full time
Commissioning Manager Birmingham, UK (Extensive Travel Required) Up to 75K per annum About the Role We are looking for an experienced Commissioning Manager to join a team delivering advanced automated warehouse solutions across the UK and internationally. This role will focus on leading the commissioning phase of high-performance automated storage and retrieval systems (ASRS) used in modern logistics and distribution environments. Although the role is based in Birmingham , the successful candidate will spend most of their time travelling to customer sites to oversee installation, commissioning, and system validation activities. Job Type: Permanent Salary: Up to 75,000 (Negotiable) Key Responsibilities Lead and manage the commissioning of automated warehouse systems on customer sites. Coordinate with engineering, software, and project management teams to ensure successful system integration. Plan and oversee system testing, validation, and performance verification prior to handover. Manage commissioning schedules, site activities, and technical resources. Troubleshoot and resolve technical issues during installation and startup . Ensure all activities meet quality, safety, and operational performance standards . Support customer training and final system handover . Requirements Proven experience in commissioning, installation, or deployment of automation or industrial systems . Strong technical troubleshooting and site coordination skills . Ability and willingness to travel extensively and work on customer sites. Experience within automation, robotics, material handling, conveyors, or warehouse systems . Strong communication and stakeholder management skills. Desirable Experience working with AutoStore automated warehouse systems (advantage but not essential). Background in automation, electrical, mechanical, or controls engineering . Experience commissioning large-scale logistics or warehouse automation projects . What's on Offer Permanent position within a growing warehouse automation sector. Salary up to 75,000 (negotiable depending on experience) . Opportunity to work on cutting-edge automated logistics systems . Exposure to multiple projects and customer environments . Career development within a rapidly expanding automation industry. Interested or know someone suitable? Send your CV to Luana Ferreira at (url removed) or call her on (phone number removed). Why work with Proactive? Proactive Global are an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive also offer a referral scheme for successful applicants - if you know anyone that could be suited to this position then please contact Proactive with their details and if they are placed by Proactive you will receive 250. T&Cs apply Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
A leading UK provider of multi-disciplinary engineering solutions, delivering complex projects safely and sustainably across sectors including energy, water, pharmaceuticals and industrial infrastructure. With a strong engineering heritage and a people-first culture, this expanding business is committed to developing its teams through structured training, apprenticeships and clear career progression, making it an excellent place to build a long-term career. Control Systems Engineers x 7 £40,000 - £55,000 + BUPA + Overtime + Car Allowance + Hybrid Working + CENG Support Derbyshire based. Ref: 23693 Controls Engineer - The Role: Work through the whole life cycle of the project from completing design documentation, developing control software, testing, commissioning and handover Interpret User Requirement Specification packages and reverse engineer existing control system software Produce functional design specifications, configure PLC and SCADA packages, conduct factory and site testing and site-based commissioning. Co-ordinate and develop junior staff as required Monitor and plan projects to ensure they are completed on time and within budget Controls Engineer - The Person: Have a high regard for health and safety Be well organised and have good communication skills at all levels Be positive, approachable, willing and helpful Be a good team player Have experience in PLC software development using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider Hold a full UK driving licence If you are an experienced Controls Engineer looking for a new challenge and have experience or interest in roles such as Automation Engineer, Systems Engineer, PLC Engineer, SCADA Engineer, or Electrical Controls Engineer, this role could be the perfect fit for you. Positions available for all levels of experience, Junior, Engineer, Senior and Team Leader. Lots of training and personal progression available. Support and assistance available to obtain degree and Chartered status. Hybrid working and car allowance available. For further information please contact Sharon Hill AE1
Apr 03, 2026
Full time
A leading UK provider of multi-disciplinary engineering solutions, delivering complex projects safely and sustainably across sectors including energy, water, pharmaceuticals and industrial infrastructure. With a strong engineering heritage and a people-first culture, this expanding business is committed to developing its teams through structured training, apprenticeships and clear career progression, making it an excellent place to build a long-term career. Control Systems Engineers x 7 £40,000 - £55,000 + BUPA + Overtime + Car Allowance + Hybrid Working + CENG Support Derbyshire based. Ref: 23693 Controls Engineer - The Role: Work through the whole life cycle of the project from completing design documentation, developing control software, testing, commissioning and handover Interpret User Requirement Specification packages and reverse engineer existing control system software Produce functional design specifications, configure PLC and SCADA packages, conduct factory and site testing and site-based commissioning. Co-ordinate and develop junior staff as required Monitor and plan projects to ensure they are completed on time and within budget Controls Engineer - The Person: Have a high regard for health and safety Be well organised and have good communication skills at all levels Be positive, approachable, willing and helpful Be a good team player Have experience in PLC software development using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider Hold a full UK driving licence If you are an experienced Controls Engineer looking for a new challenge and have experience or interest in roles such as Automation Engineer, Systems Engineer, PLC Engineer, SCADA Engineer, or Electrical Controls Engineer, this role could be the perfect fit for you. Positions available for all levels of experience, Junior, Engineer, Senior and Team Leader. Lots of training and personal progression available. Support and assistance available to obtain degree and Chartered status. Hybrid working and car allowance available. For further information please contact Sharon Hill AE1
Fire and Security Engineer 35,000 to 45,000 DOE + Vehicle + Benefits If you want a role where your experience is valued, the work is varied, and your progression is genuinely supported, this is worth a look. You'll join a specialist that delivers high quality Fire and Security installations across premium residential properties and smart commercial sites. The team is known for its attention to detail, tidy work and strong client care, so this suits someone who takes pride in doing things properly. This is a Senior Engineer role first and foremost. You'll stay hands on, lead by example on site and be trusted with more ownership day to day. As you grow, you'll also get the chance to step into wider responsibility, whether that's leading small works, supporting planning or building toward a future leadership or project role. The exact path depends on you. What you will be doing Install, commission, test and maintain modern fire and security systems Work with intruder, CCTV and access control across mixed environments Set the standard on site and support junior engineers when needed Carry out surveys, prepare clear documentation and keep clients updated Take charge of smaller works and build your confidence in wider coordination What you need to bring Strong background in fire and security installation Solid experience with intruder, CCTV and access control A calm, professional approach with clients and contractors Good planning and documentation skills A full UK driving licence A willingness to develop your career, whatever direction you want to grow in What makes this role stand out You are stepping into a senior position with trust from day one. You'll have the freedom to deliver the work to a high standard while getting exposure to the next steps in your career. Whether that turns into mentoring others, leading small projects, or eventually moving into a project or technical leadership role, you'll get support and structured development. If you want progression without losing the hands on work you enjoy, this gives you both. Package Salary 35,000 to 45,000 depending on experience Company vehicle and fuel card Laptop and phone Birthday leave Benefits platform with discounts Regular training and a clear development plan INDAV
Apr 03, 2026
Full time
Fire and Security Engineer 35,000 to 45,000 DOE + Vehicle + Benefits If you want a role where your experience is valued, the work is varied, and your progression is genuinely supported, this is worth a look. You'll join a specialist that delivers high quality Fire and Security installations across premium residential properties and smart commercial sites. The team is known for its attention to detail, tidy work and strong client care, so this suits someone who takes pride in doing things properly. This is a Senior Engineer role first and foremost. You'll stay hands on, lead by example on site and be trusted with more ownership day to day. As you grow, you'll also get the chance to step into wider responsibility, whether that's leading small works, supporting planning or building toward a future leadership or project role. The exact path depends on you. What you will be doing Install, commission, test and maintain modern fire and security systems Work with intruder, CCTV and access control across mixed environments Set the standard on site and support junior engineers when needed Carry out surveys, prepare clear documentation and keep clients updated Take charge of smaller works and build your confidence in wider coordination What you need to bring Strong background in fire and security installation Solid experience with intruder, CCTV and access control A calm, professional approach with clients and contractors Good planning and documentation skills A full UK driving licence A willingness to develop your career, whatever direction you want to grow in What makes this role stand out You are stepping into a senior position with trust from day one. You'll have the freedom to deliver the work to a high standard while getting exposure to the next steps in your career. Whether that turns into mentoring others, leading small projects, or eventually moving into a project or technical leadership role, you'll get support and structured development. If you want progression without losing the hands on work you enjoy, this gives you both. Package Salary 35,000 to 45,000 depending on experience Company vehicle and fuel card Laptop and phone Birthday leave Benefits platform with discounts Regular training and a clear development plan INDAV
A leading multidisciplinary design and build contractor in the UK with over a century of industry experience are currently on the lookout for a Control Engineers to join a dynamic team and contribute to ongoing success in the Water, Power & Energy, Pharmaceutical, and Food and Beverage sectors. This company prides themselves on being at the forefront of value-added engineering. They have a strong track record of supporting blue-chip clients across various industries, with a cultivated culture that promotes personal development and ensures the safety of our employees. Control Engineers £40,000 - £50,000 + Private Healthcare, Overtime, Pension, Expenses Opportunities for personal development within a company culture that prioritises employee safety Staffordshire based role Ref: 23686 Control Engineer - The Role: Take charge of delivering automation projects to our clients, overseeing the entire project lifecycle from design documentation to commissioning and handover Work on complex control system projects Engage with multiple stakeholders, including SI and LV engineering delivery teams and client representatives Control Engineer - The Person: A minimum of 3 years of systems engineering experience Strong knowledge of safe working practices regarding electrical equipment Proficiency in PLC and HMI software development, using devices from at least two manufacturers such as Rockwell Automation, Siemens, Mitsubishi, or Schneider. Experience with various communication protocols and SCADA systems A positive, approachable attitude A full UK driving licence - 20-30% travel - UK only If you are a Control Engineer looking for a challenging role within a company that values its employees and offers excellent opportunities for personal and professional growth, we'd love to hear from you. Apply today and take the next step in your career Position is based in Stafford. For further information call Sharon Hill
Apr 03, 2026
Full time
A leading multidisciplinary design and build contractor in the UK with over a century of industry experience are currently on the lookout for a Control Engineers to join a dynamic team and contribute to ongoing success in the Water, Power & Energy, Pharmaceutical, and Food and Beverage sectors. This company prides themselves on being at the forefront of value-added engineering. They have a strong track record of supporting blue-chip clients across various industries, with a cultivated culture that promotes personal development and ensures the safety of our employees. Control Engineers £40,000 - £50,000 + Private Healthcare, Overtime, Pension, Expenses Opportunities for personal development within a company culture that prioritises employee safety Staffordshire based role Ref: 23686 Control Engineer - The Role: Take charge of delivering automation projects to our clients, overseeing the entire project lifecycle from design documentation to commissioning and handover Work on complex control system projects Engage with multiple stakeholders, including SI and LV engineering delivery teams and client representatives Control Engineer - The Person: A minimum of 3 years of systems engineering experience Strong knowledge of safe working practices regarding electrical equipment Proficiency in PLC and HMI software development, using devices from at least two manufacturers such as Rockwell Automation, Siemens, Mitsubishi, or Schneider. Experience with various communication protocols and SCADA systems A positive, approachable attitude A full UK driving licence - 20-30% travel - UK only If you are a Control Engineer looking for a challenging role within a company that values its employees and offers excellent opportunities for personal and professional growth, we'd love to hear from you. Apply today and take the next step in your career Position is based in Stafford. For further information call Sharon Hill
A leading multidisciplinary design and build contractor in the UK with over a century of industry experience are currently on the lookout for an experienced Lead Controls Engineer to join a dynamic team and contribute to ongoing success in the Water, Power & Energy, Pharmaceutical, and Food and Beverage sectors. This company prides themselves on being at the forefront of value-added engineering. They have a strong track record of supporting blue-chip clients across various industries, with a culture that promotes personal development and ensures the safety of our employees. Lead Control Engineer £50-55k + Car Allowances + CENG Support + Pension, Healthcare + More A key role delivering automation projects across the entire project lifecycle. Ref: 23690 Lead Control Engineer - The Role: You will take charge of complex control system projects, either independently or leading a team of 3-5 engineers You will be involved in all stages of the project, from creating design documentation to developing control software, testing, commissioning and handover If leading a team, you will manage the workload and progress of your team members, working closely with the Project Manager to meet contractual project milestones You will review design documents and test the software developed by your team members Lead Control Engineer - The Person: Strong knowledge of safe working practices PLC and HMI software development experience using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider. Experience with multiple communication protocols and working with SCADA systems and VSDs. Completion of functional design specifications As a Lead Control Engineer, you will enjoy a rewarding role in a leading engineering company, who pride themselves on their culture that promotes personal development and ensures employee safety. With over 100 years of industry experience, they have honed their expertise to support blue chip clients across various sectors, positioning themselves at the forefront of value-added engineering. If you have held or are interested in the following roles, this Lead Controls Engineer position could be a perfect fit for you: Control Systems Engineer, Automation Engineer, PLC Programmer, SCADA Engineer, or Senior Controls Engineer. For further information please contact Sharon Hill AE1
Apr 03, 2026
Full time
A leading multidisciplinary design and build contractor in the UK with over a century of industry experience are currently on the lookout for an experienced Lead Controls Engineer to join a dynamic team and contribute to ongoing success in the Water, Power & Energy, Pharmaceutical, and Food and Beverage sectors. This company prides themselves on being at the forefront of value-added engineering. They have a strong track record of supporting blue-chip clients across various industries, with a culture that promotes personal development and ensures the safety of our employees. Lead Control Engineer £50-55k + Car Allowances + CENG Support + Pension, Healthcare + More A key role delivering automation projects across the entire project lifecycle. Ref: 23690 Lead Control Engineer - The Role: You will take charge of complex control system projects, either independently or leading a team of 3-5 engineers You will be involved in all stages of the project, from creating design documentation to developing control software, testing, commissioning and handover If leading a team, you will manage the workload and progress of your team members, working closely with the Project Manager to meet contractual project milestones You will review design documents and test the software developed by your team members Lead Control Engineer - The Person: Strong knowledge of safe working practices PLC and HMI software development experience using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider. Experience with multiple communication protocols and working with SCADA systems and VSDs. Completion of functional design specifications As a Lead Control Engineer, you will enjoy a rewarding role in a leading engineering company, who pride themselves on their culture that promotes personal development and ensures employee safety. With over 100 years of industry experience, they have honed their expertise to support blue chip clients across various sectors, positioning themselves at the forefront of value-added engineering. If you have held or are interested in the following roles, this Lead Controls Engineer position could be a perfect fit for you: Control Systems Engineer, Automation Engineer, PLC Programmer, SCADA Engineer, or Senior Controls Engineer. For further information please contact Sharon Hill AE1
A great opportunity to work for a company that designs bespoke machinery for medical specialists worldwide. Renowned for its precision engineering, custom system design and strong commitment to sustainability, this organisation offers a dynamic environment where innovation and craftsmanship go hand in hand. Control Systems Engineer £45000 - £55000 + Enhanced Earning While Commissioning, Pension, Early Finish Friday 1pm. 37 hour week. West Yorkshire. Ref: 24996 Control Systems Engineer - The Role: Qualified in Electrical or Electronic Engineering (HNC, HND, Degree or equivalent experience). Skilled in PLC, SCADA and HMI programming, with experience in control system design and integration. Siemens Servo & Inverter Drives and Unify panel experience highly advantageous Strong practical understanding of electrical schematics, panel layouts and industrial automation. Hands-on, detail-oriented and capable of working independently with minimal supervision. Confident communicator who can liaise effectively with customers, suppliers and colleagues. Adaptable and eager to learn new systems, tools and technologies. Committed to upholding safety, quality and environmental standards. Able to travel for on-site installations, testing and customer support when required. A proactive problem-solver with a focus on delivering high-quality engineering solutions. Control Systems Engineer - The Person: Install, commission and test electrical components, systems and electronic controls for new equipment builds and customer installations. Interpret electrical design blueprints to plan and implement circuit layouts, panel boards and system configurations. Develop, install and maintain control software, including PLC, Safety PLC, SCADA and HMI systems. Perform detailed quality and accuracy checks on electrical assemblies both in-house and on customer sites. Lead or assist with Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT), ensuring smooth commissioning and reliable performance. Serve as a key point of contact for clients on electrical and process-related matters, providing technical support and troubleshooting assistance. Located in West Yorkshire, this role would be commutable from Huddersfield, Leeds or Bradford. For further information please call Sharon Hill AE1
Apr 03, 2026
Full time
A great opportunity to work for a company that designs bespoke machinery for medical specialists worldwide. Renowned for its precision engineering, custom system design and strong commitment to sustainability, this organisation offers a dynamic environment where innovation and craftsmanship go hand in hand. Control Systems Engineer £45000 - £55000 + Enhanced Earning While Commissioning, Pension, Early Finish Friday 1pm. 37 hour week. West Yorkshire. Ref: 24996 Control Systems Engineer - The Role: Qualified in Electrical or Electronic Engineering (HNC, HND, Degree or equivalent experience). Skilled in PLC, SCADA and HMI programming, with experience in control system design and integration. Siemens Servo & Inverter Drives and Unify panel experience highly advantageous Strong practical understanding of electrical schematics, panel layouts and industrial automation. Hands-on, detail-oriented and capable of working independently with minimal supervision. Confident communicator who can liaise effectively with customers, suppliers and colleagues. Adaptable and eager to learn new systems, tools and technologies. Committed to upholding safety, quality and environmental standards. Able to travel for on-site installations, testing and customer support when required. A proactive problem-solver with a focus on delivering high-quality engineering solutions. Control Systems Engineer - The Person: Install, commission and test electrical components, systems and electronic controls for new equipment builds and customer installations. Interpret electrical design blueprints to plan and implement circuit layouts, panel boards and system configurations. Develop, install and maintain control software, including PLC, Safety PLC, SCADA and HMI systems. Perform detailed quality and accuracy checks on electrical assemblies both in-house and on customer sites. Lead or assist with Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT), ensuring smooth commissioning and reliable performance. Serve as a key point of contact for clients on electrical and process-related matters, providing technical support and troubleshooting assistance. Located in West Yorkshire, this role would be commutable from Huddersfield, Leeds or Bradford. For further information please call Sharon Hill AE1
An excellent opportunity for an experienced Project Design Engineer to join a well-established company based in Birtley, Gateshead. Job Type: Full-Time, Permanent. Location: Gateshead. Salary: Starting from £37,000 per annum About the Role: The company's Design Engineers are responsible for technical project delivery of hydraulic systems. Their duties are to design, plan and deliver projects to meet customer needs. The scope of the engineering builds may include hydraulic power units, control consoles, bespoke hydraulic systems, and manifolds. The project owner will be responsible for providing the technical information and documentation to the customer, suppliers, sub-contractors and our hydraulic technicians. They will be maintaining constant communication with the customer and ensure that all commercial, technical, and financial targets are met. As part of this role there is an expectation that the project owner will have presence in the workshop and on- site and may be involved in activities such as mechanical assembly and commissioning. This position will be a varied and challenging role with positive opportunities for a motivated individual to develop the position to achieve their own career goals. Main Duties: Communication with customer Review and clarify customer requirements Prepare engineering drawings and hydraulic schematics Prepare quotations and technical specifications Carry out engineering calculations Select and size components to optimise system performance and cost Resolve problems and improve manufacturability and serviceability of products Prepare technical specification for sub-contractors Prepare technical documents for work files such as, work instructions & risk assessments, mechanical and electrical drawings, hydraulic schematics, technical procedures, and reports Support technicians and engineers during testing and commissioning Control work after completion and issue the as-built final documents Ensure compliance with customer requirements Ensure that project financial targets are met Review the project KPIs for debriefing Attend site or workshop when required Supporting in all areas of work where appropriate Embrace and support company values Candidate Requirements: 2:1 Bachelor degree or equivalent in mechanical engineering Minimum 3 years' experience Ability to carry out engineering calculations Knowledge of hydraulic, mechanical, and electrical/control system Time management skills to handle multi-tasking Understanding of manufacturing processes and construction methods Good knowledge of computer assisted design (CAD) software - Autodesk Inventor preferred Interest in working both in a desk and workshop environment Creative approach for generating new ideas Strong background in math and science Clear communicator both written and verbal Skilled in Microsoft Office packages including Excel and Word Eligible to work permanently in the UK. Full driving license KPI's: On time, specification and in budget delivery of own projects at all time Ensure compliance of designs to customer specification and standards at all time Preparation of tenders and quotations on time with at least 10% conversion rate. If you feel that you have the relative skills/attributes to fulfil this role then please apply now! The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Apr 03, 2026
Full time
An excellent opportunity for an experienced Project Design Engineer to join a well-established company based in Birtley, Gateshead. Job Type: Full-Time, Permanent. Location: Gateshead. Salary: Starting from £37,000 per annum About the Role: The company's Design Engineers are responsible for technical project delivery of hydraulic systems. Their duties are to design, plan and deliver projects to meet customer needs. The scope of the engineering builds may include hydraulic power units, control consoles, bespoke hydraulic systems, and manifolds. The project owner will be responsible for providing the technical information and documentation to the customer, suppliers, sub-contractors and our hydraulic technicians. They will be maintaining constant communication with the customer and ensure that all commercial, technical, and financial targets are met. As part of this role there is an expectation that the project owner will have presence in the workshop and on- site and may be involved in activities such as mechanical assembly and commissioning. This position will be a varied and challenging role with positive opportunities for a motivated individual to develop the position to achieve their own career goals. Main Duties: Communication with customer Review and clarify customer requirements Prepare engineering drawings and hydraulic schematics Prepare quotations and technical specifications Carry out engineering calculations Select and size components to optimise system performance and cost Resolve problems and improve manufacturability and serviceability of products Prepare technical specification for sub-contractors Prepare technical documents for work files such as, work instructions & risk assessments, mechanical and electrical drawings, hydraulic schematics, technical procedures, and reports Support technicians and engineers during testing and commissioning Control work after completion and issue the as-built final documents Ensure compliance with customer requirements Ensure that project financial targets are met Review the project KPIs for debriefing Attend site or workshop when required Supporting in all areas of work where appropriate Embrace and support company values Candidate Requirements: 2:1 Bachelor degree or equivalent in mechanical engineering Minimum 3 years' experience Ability to carry out engineering calculations Knowledge of hydraulic, mechanical, and electrical/control system Time management skills to handle multi-tasking Understanding of manufacturing processes and construction methods Good knowledge of computer assisted design (CAD) software - Autodesk Inventor preferred Interest in working both in a desk and workshop environment Creative approach for generating new ideas Strong background in math and science Clear communicator both written and verbal Skilled in Microsoft Office packages including Excel and Word Eligible to work permanently in the UK. Full driving license KPI's: On time, specification and in budget delivery of own projects at all time Ensure compliance of designs to customer specification and standards at all time Preparation of tenders and quotations on time with at least 10% conversion rate. If you feel that you have the relative skills/attributes to fulfil this role then please apply now! The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Join Police Digital Service as NMC Cyber Security Engineer - 2 roles available Salary starting at £55,000 per annum To protect people from harm in our rapidly changing world, police services must not only keep up with technology and business changes but develop capabilities and ways of working that will enable them to adapt to and deal with the complexity of modern criminality. Police Digital Service strives to be the go-to partner for technology developments and programmes across UK policing. Our team provides technical advice and delivers services to help policing and law enforcement organisations across the UK prioritise and focus on technology efforts. Our vision is to support UK policing to keep people safe, get more from technology investments and make better use of public money, and we re always on the lookout for great talent to help us achieve this. The National Management Centre (NMC) is part of Police Digital Services and provides visibility and control of information risks for policing. It supports the 24x7x365 nature of police operations, providing a threat detection and response capability for digital services before, during and after cyber-attacks, enabling stakeholders to understand and proactively manage risk across the technology estate at both the national and force level. Key Responsibilities Creating, configuring, and maintaining the technology platforms and tooling that support security operations within the NMC. Ensuring that systems are configured and available to meet NMC objectives. Providing support to police forces for the onboarding and maintenance of system log sources. Configuring and maintaining the NMC central Microsoft Azure, Lighthouse and Sentinel platform. Developing, maintaining, and deploying detection rules and other SIEM content. Creating custom solutions using both low-code and traditional development approaches. Providing support to forces for the configuration of Sentinel and log sources. Testing and implementing new Sentinel connectors. Working with wider NMC teams, contributing to Continual Service Improvement and innovations. Creating and maintaining technical design documentation. Working with the PDS design team and wider NMC operational teams to create, test and implement new tools and technologies. Leveraging Microsoft support for technical assistance and information regarding roadmap features. What you need to succeed in the role Experience of supporting and developing SIEM platforms in the context of a Security Operations Centre. Experience of log source configuration and parsing, as part of a SIEM implementation, including experience of data normalisation using RegEx. Experience and relevant certification in cloud services design and administration. Practical experience in the creation, testing, implementation, and support of custom tooling to support Security Operations. Experience working with APIs. Practical experience in software development and scripting, preferably PowerShell and Python. Initiative and the ability to produce quality work without close supervision. Good written and verbal communication skills, particularly in relation to technical subjects. Attention to detail and genuine passion for maintaining high quality software configuration. Broad cyber security awareness and practical experience. Why Join us? Balance is important and we want you to take time off to recharge - we offer 28 days annual leave plus bank holidays, rising to 30 days after 5 years of service. Holiday Purchase also available Flexible working hours - We trust you to do your job and we appreciate that life doesn t always fit around a 9 to 5 workday. We operate core hours of 8 to 6, Monday to Friday (37hr week) We care about your well-being - we have an EAP that offers not just welfare benefits but also retail discounts Plan for the future - we offer an excellent pension scheme and life assurance cover Put your mind at rest regarding your health - offering remote GP, mental health and physiotherapy appointments via video consultation Family - Enhanced maternity and paternity pay along with a flexible return to work Community - one paid day off per year for volunteering You can find out more here: Benefits - Police Digital Service (pds.police.uk) Diversity, equity and inclusion We are committed to equal opportunity for all and will not discriminate on any grounds. We encourage applications from people from the widest possible span of experience. We particularly welcome applications from Black, Asian and Minority Ethnic (BAME) candidates and people with disabilities. Working Arrangements At the NMC, you will benefit from hybrid working, getting the advantages of both face-to-face team engagement and home working. NMC employees have the opportunity to work in our modern office environment for in-person collaboration, however you will also get the opportunity to work from home 2 days a week. All applicants must be eligible for NPPV3 and SC clearances. Successful applicants will require NPPV3 clearance to have been approved before starting with PDS. Expiry Date: Tuesday 7th April 23:59pm
Apr 03, 2026
Full time
Join Police Digital Service as NMC Cyber Security Engineer - 2 roles available Salary starting at £55,000 per annum To protect people from harm in our rapidly changing world, police services must not only keep up with technology and business changes but develop capabilities and ways of working that will enable them to adapt to and deal with the complexity of modern criminality. Police Digital Service strives to be the go-to partner for technology developments and programmes across UK policing. Our team provides technical advice and delivers services to help policing and law enforcement organisations across the UK prioritise and focus on technology efforts. Our vision is to support UK policing to keep people safe, get more from technology investments and make better use of public money, and we re always on the lookout for great talent to help us achieve this. The National Management Centre (NMC) is part of Police Digital Services and provides visibility and control of information risks for policing. It supports the 24x7x365 nature of police operations, providing a threat detection and response capability for digital services before, during and after cyber-attacks, enabling stakeholders to understand and proactively manage risk across the technology estate at both the national and force level. Key Responsibilities Creating, configuring, and maintaining the technology platforms and tooling that support security operations within the NMC. Ensuring that systems are configured and available to meet NMC objectives. Providing support to police forces for the onboarding and maintenance of system log sources. Configuring and maintaining the NMC central Microsoft Azure, Lighthouse and Sentinel platform. Developing, maintaining, and deploying detection rules and other SIEM content. Creating custom solutions using both low-code and traditional development approaches. Providing support to forces for the configuration of Sentinel and log sources. Testing and implementing new Sentinel connectors. Working with wider NMC teams, contributing to Continual Service Improvement and innovations. Creating and maintaining technical design documentation. Working with the PDS design team and wider NMC operational teams to create, test and implement new tools and technologies. Leveraging Microsoft support for technical assistance and information regarding roadmap features. What you need to succeed in the role Experience of supporting and developing SIEM platforms in the context of a Security Operations Centre. Experience of log source configuration and parsing, as part of a SIEM implementation, including experience of data normalisation using RegEx. Experience and relevant certification in cloud services design and administration. Practical experience in the creation, testing, implementation, and support of custom tooling to support Security Operations. Experience working with APIs. Practical experience in software development and scripting, preferably PowerShell and Python. Initiative and the ability to produce quality work without close supervision. Good written and verbal communication skills, particularly in relation to technical subjects. Attention to detail and genuine passion for maintaining high quality software configuration. Broad cyber security awareness and practical experience. Why Join us? Balance is important and we want you to take time off to recharge - we offer 28 days annual leave plus bank holidays, rising to 30 days after 5 years of service. Holiday Purchase also available Flexible working hours - We trust you to do your job and we appreciate that life doesn t always fit around a 9 to 5 workday. We operate core hours of 8 to 6, Monday to Friday (37hr week) We care about your well-being - we have an EAP that offers not just welfare benefits but also retail discounts Plan for the future - we offer an excellent pension scheme and life assurance cover Put your mind at rest regarding your health - offering remote GP, mental health and physiotherapy appointments via video consultation Family - Enhanced maternity and paternity pay along with a flexible return to work Community - one paid day off per year for volunteering You can find out more here: Benefits - Police Digital Service (pds.police.uk) Diversity, equity and inclusion We are committed to equal opportunity for all and will not discriminate on any grounds. We encourage applications from people from the widest possible span of experience. We particularly welcome applications from Black, Asian and Minority Ethnic (BAME) candidates and people with disabilities. Working Arrangements At the NMC, you will benefit from hybrid working, getting the advantages of both face-to-face team engagement and home working. NMC employees have the opportunity to work in our modern office environment for in-person collaboration, however you will also get the opportunity to work from home 2 days a week. All applicants must be eligible for NPPV3 and SC clearances. Successful applicants will require NPPV3 clearance to have been approved before starting with PDS. Expiry Date: Tuesday 7th April 23:59pm
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 14th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 03, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 14th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Engineering Manager - Electrical Systems Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs, also a requirement to visit other sites in the UK on a regular basis) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £56,000+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Power team, you will be leading a multi disciplinary team of engineers, delivering Power Systems design and development and defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs This role will provide you with an opportunity to travel to various locations throughout the UK, including various BAE, customer and supplier sites. Core duties: You'll be leading & managing an engineering team to deliver the functional design and definition of Electrical Power Systems equipment You'll be managing the processes and reviews of technical documentation & associated technical risks, assumptions and dependencies You'll provide advice on electrical power technical aspects across a broad range of engineering disciplines You'll be engaging with customers and suppliers to provide solutions to complex problems You'll be taking a leading role by guiding the team through the systems definition process You'll be providing leadership and mentoring of more junior team members to ensure the necessary capability and skills development Essential Skills: Chartership or working (or prepared to work) towards Engineering degree or HND with substantial experience in Electrical Engineering design / development Experience of design / development of power systems (concept through to detailed design) Significant knowledge of AC and DC electrical power systems Strong analytical and problem solving skills Team Leadership experience The Electrical Power Systems Definition Team: The Electrical Power Systems Definition team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 03, 2026
Full time
Job Title: Engineering Manager - Electrical Systems Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs, also a requirement to visit other sites in the UK on a regular basis) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £56,000+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Power team, you will be leading a multi disciplinary team of engineers, delivering Power Systems design and development and defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs This role will provide you with an opportunity to travel to various locations throughout the UK, including various BAE, customer and supplier sites. Core duties: You'll be leading & managing an engineering team to deliver the functional design and definition of Electrical Power Systems equipment You'll be managing the processes and reviews of technical documentation & associated technical risks, assumptions and dependencies You'll provide advice on electrical power technical aspects across a broad range of engineering disciplines You'll be engaging with customers and suppliers to provide solutions to complex problems You'll be taking a leading role by guiding the team through the systems definition process You'll be providing leadership and mentoring of more junior team members to ensure the necessary capability and skills development Essential Skills: Chartership or working (or prepared to work) towards Engineering degree or HND with substantial experience in Electrical Engineering design / development Experience of design / development of power systems (concept through to detailed design) Significant knowledge of AC and DC electrical power systems Strong analytical and problem solving skills Team Leadership experience The Electrical Power Systems Definition Team: The Electrical Power Systems Definition team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Our client a leading advanced manufacturing organisation seeks a Controls Engineer to take ownership of industrial automation systems across high-performance automated cells and lines. This is a hands-on, highly visible role supporting production, maintenance, and engineering teams to drive uptime, safety, and continuous improvement on site. Controls Systems Engineer £45,000 - £55,000 + c5% Bonus + 15% Pension + 33 Days Holidays + Benefits Gloucestershire Ref: 25065 Controls Systems Engineer - The Role: Design, program, and commission PLCs & motion systems ( Siemens TIA/Step7, Mitsubishi, Beckhoff ) Develop and integrate functional safety systems (light curtains, scanners, safety PLCs) Deliver SCADA/HMI solutions with alarms, diagnostics, and data acquisition Lead automation projects from concept to handover Troubleshoot faults, implement upgrades, and support production & maintenance teams Controls Systems Engineer - The Person: Proven experience as a Control Systems Engineer or in a similar automation engineering role. Strong proficiency in PLC programming (Siemens, Allen-Bradley, or equivalent platforms). Hands-on experience with industrial automation systems , including SCADA , HMI , and overall control system architecture . Solid background in manufacturing, engineering, or industrial environments . Located in Gloucestershire, this role would be commutable from Bristol, Gloucester, Ross-on-Wye, Newport and surrounding areas. Looking for a job involved with automation, control systems, process control or systems integration? Register your details on (url removed) where you will find a full list of live positions where a customised automated search process allows immediate access to new vacancies as they are registered. Free, confidential service. For further information please contact John Anderson AE1
Apr 03, 2026
Full time
Our client a leading advanced manufacturing organisation seeks a Controls Engineer to take ownership of industrial automation systems across high-performance automated cells and lines. This is a hands-on, highly visible role supporting production, maintenance, and engineering teams to drive uptime, safety, and continuous improvement on site. Controls Systems Engineer £45,000 - £55,000 + c5% Bonus + 15% Pension + 33 Days Holidays + Benefits Gloucestershire Ref: 25065 Controls Systems Engineer - The Role: Design, program, and commission PLCs & motion systems ( Siemens TIA/Step7, Mitsubishi, Beckhoff ) Develop and integrate functional safety systems (light curtains, scanners, safety PLCs) Deliver SCADA/HMI solutions with alarms, diagnostics, and data acquisition Lead automation projects from concept to handover Troubleshoot faults, implement upgrades, and support production & maintenance teams Controls Systems Engineer - The Person: Proven experience as a Control Systems Engineer or in a similar automation engineering role. Strong proficiency in PLC programming (Siemens, Allen-Bradley, or equivalent platforms). Hands-on experience with industrial automation systems , including SCADA , HMI , and overall control system architecture . Solid background in manufacturing, engineering, or industrial environments . Located in Gloucestershire, this role would be commutable from Bristol, Gloucester, Ross-on-Wye, Newport and surrounding areas. Looking for a job involved with automation, control systems, process control or systems integration? Register your details on (url removed) where you will find a full list of live positions where a customised automated search process allows immediate access to new vacancies as they are registered. Free, confidential service. For further information please contact John Anderson AE1
Operations Planning Manager Role Overview On behalf of our client, a rapidly growing commercial vehicle conversion and specialist build business operating across multiple UK sites, we are recruiting a Sales & Operations Planning Manager to support continued expansion and operational scalability. This strategic and operational leadership role is responsible for aligning sales demand, operational capacity, and margin performance across the organisation. The successful candidate will lead the Sales & Operations Planning process, translating the sales pipeline into structured production plans while ensuring operational capability supports sustainable and profitable revenue growth. Key Activities S&OP Leadership • Design and lead the monthly Sales & Operations Planning (S&OP) process. • Develop and maintain a rolling 3 12-month demand and capacity plan across all sites. • Provide scenario modelling to support growth planning, contract wins, and operational investment decisions. • Present demand, capacity, and risk analysis to senior leadership. Demand & Commercial Planning • Collaborate closely with the Sales Manager to review sales pipeline and forecast demand. • Phase contract wins and new work to align with operational capacity and margin targets. • Challenge commercially unsustainable or operationally unachievable demand intake. Capacity & Production Planning • Own and manage the Master Production Schedule within EPICOR ERP. • Lead, coach, and develop the production scheduling team. • Balance labour loading and production flow across multiple operational sites. • Identify production bottlenecks and capacity constraints. • Drive improvements in utilisation, throughput, and production lead times. ERP / Systems Ownership • Lead planning functionality and best practice use of EPICOR ERP. • Optimise MRP configuration, reporting capability, and system workflows. • Ensure data integrity across demand planning, inventory management, and production modules. • Develop dashboards and operational KPIs including OTIF, utilisation, WIP, and throughput, using Power BI. Operational Performance • Improve demand planning accuracy and forecasting reliability. • Protect gross margin through disciplined production phasing and controlled intake. • Drive continuous improvement across production scheduling and planning processes. • Support operational scalability as the business expands across additional sites. Skills & Experience Essential • Proven leadership experience in Sales & Operations Planning (S&OP) or demand planning. • Strong background within manufacturing, engineering, automotive, or commercial vehicle environments. • Demonstrable experience operating and managing MRP/ERP systems. • Experience leading and developing production scheduling or planning teams. • Strong commercial awareness with experience supporting revenue growth in scaling organisations. • Confident communicator able to influence sales teams and senior stakeholders. Desirable • Hands-on experience using EPICOR ERP. • Experience implementing or improving S&OP processes in multi-site environments. • Experience building Power BI dashboards or operational reporting frameworks.
Apr 03, 2026
Full time
Operations Planning Manager Role Overview On behalf of our client, a rapidly growing commercial vehicle conversion and specialist build business operating across multiple UK sites, we are recruiting a Sales & Operations Planning Manager to support continued expansion and operational scalability. This strategic and operational leadership role is responsible for aligning sales demand, operational capacity, and margin performance across the organisation. The successful candidate will lead the Sales & Operations Planning process, translating the sales pipeline into structured production plans while ensuring operational capability supports sustainable and profitable revenue growth. Key Activities S&OP Leadership • Design and lead the monthly Sales & Operations Planning (S&OP) process. • Develop and maintain a rolling 3 12-month demand and capacity plan across all sites. • Provide scenario modelling to support growth planning, contract wins, and operational investment decisions. • Present demand, capacity, and risk analysis to senior leadership. Demand & Commercial Planning • Collaborate closely with the Sales Manager to review sales pipeline and forecast demand. • Phase contract wins and new work to align with operational capacity and margin targets. • Challenge commercially unsustainable or operationally unachievable demand intake. Capacity & Production Planning • Own and manage the Master Production Schedule within EPICOR ERP. • Lead, coach, and develop the production scheduling team. • Balance labour loading and production flow across multiple operational sites. • Identify production bottlenecks and capacity constraints. • Drive improvements in utilisation, throughput, and production lead times. ERP / Systems Ownership • Lead planning functionality and best practice use of EPICOR ERP. • Optimise MRP configuration, reporting capability, and system workflows. • Ensure data integrity across demand planning, inventory management, and production modules. • Develop dashboards and operational KPIs including OTIF, utilisation, WIP, and throughput, using Power BI. Operational Performance • Improve demand planning accuracy and forecasting reliability. • Protect gross margin through disciplined production phasing and controlled intake. • Drive continuous improvement across production scheduling and planning processes. • Support operational scalability as the business expands across additional sites. Skills & Experience Essential • Proven leadership experience in Sales & Operations Planning (S&OP) or demand planning. • Strong background within manufacturing, engineering, automotive, or commercial vehicle environments. • Demonstrable experience operating and managing MRP/ERP systems. • Experience leading and developing production scheduling or planning teams. • Strong commercial awareness with experience supporting revenue growth in scaling organisations. • Confident communicator able to influence sales teams and senior stakeholders. Desirable • Hands-on experience using EPICOR ERP. • Experience implementing or improving S&OP processes in multi-site environments. • Experience building Power BI dashboards or operational reporting frameworks.
Are you a skilled Control Systems Engineer ready to take on varied, high-impact projects in the North East? We re working with a fast-growing, independently owned automation specialist delivering cutting-edge control systems to some of the most recognised names in the industry. Supporting food & beverage, pharmaceutical and utilities to high-security industries such as defence, aerospace and nuclear. They champion innovation, embrace complex challenges and take pride in their delivery. With a healthy project pipeline they are looking to bring talented engineers into their team. Control Systems Engineers £50,000 £70,000 DOE + Pension + Healthcare + Life Assurance Excellent training & development opportunities. Newcastle. Ref: 23824 Controls Engineer - The Role: Design, configure and develop PLC & SCADA systems for a range of industrial automation projects Produce functional design specifications and test documentation (FDS, FAT/SAT) Manage full project life cycles from initial design to on-site commissioning Liaise with clients and subcontractors to ensure seamless delivery. Travel across the UK (c20%) to support commissioning and client interaction. Controls Engineer - The Person: Solid experience in real-time control systems design and commissioning. Proficient in PLC programming (Rockwell, Siemens, Mitsubishi, Schneider). SCADA design experience preferred essential for senior-level roles. Previous experience within a systems integrator environment Comfortable managing documentation and project processes. Degree-qualified (or equivalent experience) and a full UK driving licence. We are keen to see Control Systems Engineers with experience of the following packages: PLC Software Rockwell, Siemens, Mitsubishi, Schneider HMI/SCADA Software Rockwell FTView ME & SE, AVEVA InTouch & System Platform, Schneider ClearSCADA GEiFIX, Siemens WinCC This is an excellent opportunity to join a business with a heritage of over 100 years and a current order book approaching £1Bn. They offer a clear career path, on-going professional training including Chartership and a collaborative working environment. Preferably you will be degree qualified with background in a similar role. Strong communication skills are needed along with a full UK valid driving licence. Office based in Newcastle commutable from; South Sheilds, Sunderland, Consett and Blyth. For further information please contact Sharon Hill
Apr 03, 2026
Full time
Are you a skilled Control Systems Engineer ready to take on varied, high-impact projects in the North East? We re working with a fast-growing, independently owned automation specialist delivering cutting-edge control systems to some of the most recognised names in the industry. Supporting food & beverage, pharmaceutical and utilities to high-security industries such as defence, aerospace and nuclear. They champion innovation, embrace complex challenges and take pride in their delivery. With a healthy project pipeline they are looking to bring talented engineers into their team. Control Systems Engineers £50,000 £70,000 DOE + Pension + Healthcare + Life Assurance Excellent training & development opportunities. Newcastle. Ref: 23824 Controls Engineer - The Role: Design, configure and develop PLC & SCADA systems for a range of industrial automation projects Produce functional design specifications and test documentation (FDS, FAT/SAT) Manage full project life cycles from initial design to on-site commissioning Liaise with clients and subcontractors to ensure seamless delivery. Travel across the UK (c20%) to support commissioning and client interaction. Controls Engineer - The Person: Solid experience in real-time control systems design and commissioning. Proficient in PLC programming (Rockwell, Siemens, Mitsubishi, Schneider). SCADA design experience preferred essential for senior-level roles. Previous experience within a systems integrator environment Comfortable managing documentation and project processes. Degree-qualified (or equivalent experience) and a full UK driving licence. We are keen to see Control Systems Engineers with experience of the following packages: PLC Software Rockwell, Siemens, Mitsubishi, Schneider HMI/SCADA Software Rockwell FTView ME & SE, AVEVA InTouch & System Platform, Schneider ClearSCADA GEiFIX, Siemens WinCC This is an excellent opportunity to join a business with a heritage of over 100 years and a current order book approaching £1Bn. They offer a clear career path, on-going professional training including Chartership and a collaborative working environment. Preferably you will be degree qualified with background in a similar role. Strong communication skills are needed along with a full UK valid driving licence. Office based in Newcastle commutable from; South Sheilds, Sunderland, Consett and Blyth. For further information please contact Sharon Hill
One of the UK's most established multidisciplinary design and build contractors with a rich history spanning over a century are in search of experienced Lead Controls Engineers to join a dynamic team. Specialising in the Water, Power & Energy, Pharmaceutical and Food and Beverage industries, they are at the cutting edge of value-added engineering. With over 100 years of industry experience, they have honed their expertise to support blue chip clients, positioning themselves at the forefront of value-added engineering. Lead Control Systems Engineer £50-55k + Car Allowances + Benefits / Hybrid Working A key role delivering automation projects across the entire project life cycle Join a large team of controls & automation engineers across multiple UK locations North West based role. Ref: 23684 Lead Controls Engineer - The Role: You will take charge of complex control system projects, either independently or leading a team of 3-5 engineers You will be involved in all stages of the project, from creating design documentation to developing control software, testing, commissioning and handover If leading a team, you will manage the workload and progression of your team members, working closely with the Project Manager to meet contractual project milestones You will review design documents and test the software developed by your team members Lead Controls Engineer - The Person: Strong knowledge of safe working practices PLC and HMI software development experience using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider Experience with multiple communication protocols and working with SCADA systems and VSDs As a Lead Controls Engineer, you will enjoy a rewarding role in a leading engineering business. Working for a company who pride themselves on their culture that promotes personal development and ensures employee safety. If you have a proven track record in delivering control and automation projects to major UK clients in the Water, Industrial Automation or Process sectors, this is the perfect opportunity for you. For further information call Sharon Hill AE1
Apr 03, 2026
Full time
One of the UK's most established multidisciplinary design and build contractors with a rich history spanning over a century are in search of experienced Lead Controls Engineers to join a dynamic team. Specialising in the Water, Power & Energy, Pharmaceutical and Food and Beverage industries, they are at the cutting edge of value-added engineering. With over 100 years of industry experience, they have honed their expertise to support blue chip clients, positioning themselves at the forefront of value-added engineering. Lead Control Systems Engineer £50-55k + Car Allowances + Benefits / Hybrid Working A key role delivering automation projects across the entire project life cycle Join a large team of controls & automation engineers across multiple UK locations North West based role. Ref: 23684 Lead Controls Engineer - The Role: You will take charge of complex control system projects, either independently or leading a team of 3-5 engineers You will be involved in all stages of the project, from creating design documentation to developing control software, testing, commissioning and handover If leading a team, you will manage the workload and progression of your team members, working closely with the Project Manager to meet contractual project milestones You will review design documents and test the software developed by your team members Lead Controls Engineer - The Person: Strong knowledge of safe working practices PLC and HMI software development experience using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider Experience with multiple communication protocols and working with SCADA systems and VSDs As a Lead Controls Engineer, you will enjoy a rewarding role in a leading engineering business. Working for a company who pride themselves on their culture that promotes personal development and ensures employee safety. If you have a proven track record in delivering control and automation projects to major UK clients in the Water, Industrial Automation or Process sectors, this is the perfect opportunity for you. For further information call Sharon Hill AE1
