We are looking for a Electrical Design Engineer to support our client, a large Power Distribution Network Operator. About the Company This Electrical Design Engineer will report to the Design Lead and will work within the Capital Programme directorate based in either our Crawley or Maidstone office. You will be a permanent employee. About the Role Working across an Assets and Connections Portfolio, you will produce high quality electrical designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet Networks design and CDM standards. These designs could be for both non-contestable and contestable works. Responsibilities Produce Electrical Designs that can be constructed in compliance with standards and CDM requirements with little or no management. Deliver designs, which conform to all relevant Codes of Practice and company and industry standards (for all designs relevant to Sub-stations), together with Electrical Design. Contribute to the production of technical, commercial and contractual documents for procurement of engineering products. Ensure compliance with all relevant legislation, regulations and company procedures. Compliance with design assurance and audit processes. Preparation of concept and developed design, from specifications and drawings within defined periods. Provide an excellent service to the customer. Work as a Team Player within larger diverse teams. Collaborate with the operational teams to guarantee a smooth process from initial enquiry through to final energisation and project closure. Comply with the requirements of the designer/principal designer as determined by the 2015 CDM Regulations. Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (together with CDM). Support other members of the team to enhance their technical experience. Qualifications Electrical engineering background. Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages. Degree level or equivalent in engineering or science. Work towards achieving Chartership. Knowledge of design processes and DNO, ENA and International Design Standards including relevant operational aspects to deliver designs. Work with external engineering organisations and customers/partners representing UKPN to best effect. Peer review designs within specific area. A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role. Work unsupervised, set and comply with own targets, and identify cost-saving solutions. Good team working skills. A good level of business, environmental, safety, financial, and regulatory awareness. A general appreciation of financial reporting systems. Knowledge of project management. Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, Project and PowerPoint. Proficient in the use of AutoCAD or Micro station. Awareness of current and technological developments in distribution plant and equipment. Broad knowledge of cables and overhead lines. Input into construction ideas and techniques, which feed into Networks Green Action Plan. This is a fantastic opportunity to work with a global leader in its industry.
Mar 12, 2026
Full time
We are looking for a Electrical Design Engineer to support our client, a large Power Distribution Network Operator. About the Company This Electrical Design Engineer will report to the Design Lead and will work within the Capital Programme directorate based in either our Crawley or Maidstone office. You will be a permanent employee. About the Role Working across an Assets and Connections Portfolio, you will produce high quality electrical designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet Networks design and CDM standards. These designs could be for both non-contestable and contestable works. Responsibilities Produce Electrical Designs that can be constructed in compliance with standards and CDM requirements with little or no management. Deliver designs, which conform to all relevant Codes of Practice and company and industry standards (for all designs relevant to Sub-stations), together with Electrical Design. Contribute to the production of technical, commercial and contractual documents for procurement of engineering products. Ensure compliance with all relevant legislation, regulations and company procedures. Compliance with design assurance and audit processes. Preparation of concept and developed design, from specifications and drawings within defined periods. Provide an excellent service to the customer. Work as a Team Player within larger diverse teams. Collaborate with the operational teams to guarantee a smooth process from initial enquiry through to final energisation and project closure. Comply with the requirements of the designer/principal designer as determined by the 2015 CDM Regulations. Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (together with CDM). Support other members of the team to enhance their technical experience. Qualifications Electrical engineering background. Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages. Degree level or equivalent in engineering or science. Work towards achieving Chartership. Knowledge of design processes and DNO, ENA and International Design Standards including relevant operational aspects to deliver designs. Work with external engineering organisations and customers/partners representing UKPN to best effect. Peer review designs within specific area. A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role. Work unsupervised, set and comply with own targets, and identify cost-saving solutions. Good team working skills. A good level of business, environmental, safety, financial, and regulatory awareness. A general appreciation of financial reporting systems. Knowledge of project management. Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, Project and PowerPoint. Proficient in the use of AutoCAD or Micro station. Awareness of current and technological developments in distribution plant and equipment. Broad knowledge of cables and overhead lines. Input into construction ideas and techniques, which feed into Networks Green Action Plan. This is a fantastic opportunity to work with a global leader in its industry.
Job Description System Design Integrator Full Time Bristol Why Rolls-Royce? An excellent opportunity has arisen for a System Design Integrator Engineer to join the Defence Mature Programs product portfolio of Combat, Transport and Naval products within the ET&S capability in Bristol. As the System Design Integrator you will be responsible for problem resolution, defining requirements; designing and integrating products, performing technical analysis; verifying products, physical & functional systems and components throughout the product lifecycle for the Naval and Aero Engines. What you will be doing: Apply understanding of gas turbine product operation, product systems, sub-systems and interactions. Integrate and manage interfaces. Design of systems using Systems Engineering principals including the use of Robust Design tools & techniques to achieve optimum solutions at product and sub-system level. Problem resolution including ownership of, for example: root cause investigations, problem reports, Red Tops, Safety Alert Reports (SARs), Quality Concerns, Major Quality Investigations (MQIs), Drawing Alteration Requests (DARs). Planning and management of product change, design technical approval and technical investigations Work with us and we'll welcome you into a culture of caring and belonging where you can be yourself. We will listen first, embrace feedback and act with integrity. We will invest in your continuous learning and development, and make sure you have access to a wide breadth and depth of opportunities to grow your career and make a difference. We offer excellent development, a competitive salary and exceptional benefits. These include bonus, employee support assistance and employee discounts. Hybrid working is a way in which our people can balance their time between the office, home or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, frequency will depend on business needs, nature of role, what works for the team and for the individual. Who we're looking for: Being a part of Rolls-Royce you'll know we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Bachelor's degree or Master's in Engineering or regional equivalent qualification, or equivalent experience Strong technical knowledge in mechanical design methodologies and have an understanding of cross-discipline engineering concepts which include but are not limited to manufacturing engineering, aerodynamics, thermodynamics, thermal and mechanical analysis, cost engineering and product definition. An ability to apply logical, analytical and innovative thinking on a range of technical problems and make balanced decisions across technical and business parameters Knowledge and experience of product integrity / liability and certification frameworks Good communication, presentation skills and an ability to work in a multidisciplinary environment. Join us & help Rolls-Royce to become a high-performing, competitive, resilient business. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. Learn more about our global Inclusion Strategy As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Mechanical Systems Posting Date 10 Mar 2026; 00:03 Posting End Date 16 Mar 2026PandoLogic. , Location: Bristol, ENG - BS2 9NX
Mar 12, 2026
Full time
Job Description System Design Integrator Full Time Bristol Why Rolls-Royce? An excellent opportunity has arisen for a System Design Integrator Engineer to join the Defence Mature Programs product portfolio of Combat, Transport and Naval products within the ET&S capability in Bristol. As the System Design Integrator you will be responsible for problem resolution, defining requirements; designing and integrating products, performing technical analysis; verifying products, physical & functional systems and components throughout the product lifecycle for the Naval and Aero Engines. What you will be doing: Apply understanding of gas turbine product operation, product systems, sub-systems and interactions. Integrate and manage interfaces. Design of systems using Systems Engineering principals including the use of Robust Design tools & techniques to achieve optimum solutions at product and sub-system level. Problem resolution including ownership of, for example: root cause investigations, problem reports, Red Tops, Safety Alert Reports (SARs), Quality Concerns, Major Quality Investigations (MQIs), Drawing Alteration Requests (DARs). Planning and management of product change, design technical approval and technical investigations Work with us and we'll welcome you into a culture of caring and belonging where you can be yourself. We will listen first, embrace feedback and act with integrity. We will invest in your continuous learning and development, and make sure you have access to a wide breadth and depth of opportunities to grow your career and make a difference. We offer excellent development, a competitive salary and exceptional benefits. These include bonus, employee support assistance and employee discounts. Hybrid working is a way in which our people can balance their time between the office, home or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, frequency will depend on business needs, nature of role, what works for the team and for the individual. Who we're looking for: Being a part of Rolls-Royce you'll know we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Bachelor's degree or Master's in Engineering or regional equivalent qualification, or equivalent experience Strong technical knowledge in mechanical design methodologies and have an understanding of cross-discipline engineering concepts which include but are not limited to manufacturing engineering, aerodynamics, thermodynamics, thermal and mechanical analysis, cost engineering and product definition. An ability to apply logical, analytical and innovative thinking on a range of technical problems and make balanced decisions across technical and business parameters Knowledge and experience of product integrity / liability and certification frameworks Good communication, presentation skills and an ability to work in a multidisciplinary environment. Join us & help Rolls-Royce to become a high-performing, competitive, resilient business. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. Learn more about our global Inclusion Strategy As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Mechanical Systems Posting Date 10 Mar 2026; 00:03 Posting End Date 16 Mar 2026PandoLogic. , Location: Bristol, ENG - BS2 9NX
Quality Engineer Luton 6-month contract Paying up to 41p/h (inside IR35) What You'll Do Support the Principal Quality Engineer and Quality Manager in achieving quality objectives Act as the Quality focal point for in-service and returns material activities Lead and support investigations into non-conformances, including root cause analysis and corrective actions Review and approve quality documentation relating to returns, concessions, and repair activities Ensure effective traceability and configuration control of returned and unserviceable items Interface with internal stakeholders and external suppliers to resolve quality issues Ensure compliance with AS9100 and customer contractual requirements Contribute to continuous improvement initiatives across in-service quality processes Deliver compliant products on time, meeting cost and safety targets Provide reports and supporting data to Programme, Project, and functional teams What You?ll Bring Further education and/or relevant experience in Engineering, Quality, Manufacturing, or a related discipline within Defence Electronics or a similarly complex industry Demonstrated knowledge of AS9100 / ISO 9001 and Continuous Improvement methodologies Experience using quality tools such as Root Cause Corrective Action (RCCA), Pattern Fault Lifecycle, and Verification methods Strong analytical capability with the ability to translate complex data into practical, business-aligned solutions Logical thinker with a structured, methodical approach Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Mar 11, 2026
Contractor
Quality Engineer Luton 6-month contract Paying up to 41p/h (inside IR35) What You'll Do Support the Principal Quality Engineer and Quality Manager in achieving quality objectives Act as the Quality focal point for in-service and returns material activities Lead and support investigations into non-conformances, including root cause analysis and corrective actions Review and approve quality documentation relating to returns, concessions, and repair activities Ensure effective traceability and configuration control of returned and unserviceable items Interface with internal stakeholders and external suppliers to resolve quality issues Ensure compliance with AS9100 and customer contractual requirements Contribute to continuous improvement initiatives across in-service quality processes Deliver compliant products on time, meeting cost and safety targets Provide reports and supporting data to Programme, Project, and functional teams What You?ll Bring Further education and/or relevant experience in Engineering, Quality, Manufacturing, or a related discipline within Defence Electronics or a similarly complex industry Demonstrated knowledge of AS9100 / ISO 9001 and Continuous Improvement methodologies Experience using quality tools such as Root Cause Corrective Action (RCCA), Pattern Fault Lifecycle, and Verification methods Strong analytical capability with the ability to translate complex data into practical, business-aligned solutions Logical thinker with a structured, methodical approach Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Principal Digital Electronics Engineer 12 months 84.55 per hour (inside IR35) Hybrid working About the Opportunity We are seeking a Principal Digital Electronics Engineer to help deliver advanced electronic solutions across some of the most complex and high-profile defence and security programmes in the UK. This is a technical leadership role where you will shape digital hardware architectures, influence system-level design decisions, and mentor engineers across the full product lifecycle - from concept through to production and in-service support. What You'll Be Doing Lead the architecture, design and development of complex digital electronic systems Define and review FPGA, SoC, and high-speed digital designs Oversee requirements capture, design documentation, and verification strategies Provide technical authority and governance across multiple projects Support system integration, validation, and qualification activities Collaborate with systems, software, firmware, mechanical and safety teams Engage with customers and suppliers at a technical level Mentor and develop senior and junior engineers Drive continuous improvement in engineering processes and standards Your Skills & Experience Essential: Extensive experience in digital electronics design Strong background in FPGA/ASIC development (VHDL/Verilog/SystemVerilog) Experience with high-speed interfaces (e.g., PCIe, Ethernet, DDR, SERDES) Proven ability to lead technical teams or large work packages Experience with requirements management and verification methodologies Understanding of signal integrity, timing analysis, and hardware debugging Degree (or equivalent experience) in Electronic Engineering or related discipline Desirable: Experience in safety-critical or regulated industries Knowledge of secure or resilient system design Familiarity with DOORS, MATLAB, or similar tools Chartered Engineer status (or working towards)
Mar 10, 2026
Contractor
Principal Digital Electronics Engineer 12 months 84.55 per hour (inside IR35) Hybrid working About the Opportunity We are seeking a Principal Digital Electronics Engineer to help deliver advanced electronic solutions across some of the most complex and high-profile defence and security programmes in the UK. This is a technical leadership role where you will shape digital hardware architectures, influence system-level design decisions, and mentor engineers across the full product lifecycle - from concept through to production and in-service support. What You'll Be Doing Lead the architecture, design and development of complex digital electronic systems Define and review FPGA, SoC, and high-speed digital designs Oversee requirements capture, design documentation, and verification strategies Provide technical authority and governance across multiple projects Support system integration, validation, and qualification activities Collaborate with systems, software, firmware, mechanical and safety teams Engage with customers and suppliers at a technical level Mentor and develop senior and junior engineers Drive continuous improvement in engineering processes and standards Your Skills & Experience Essential: Extensive experience in digital electronics design Strong background in FPGA/ASIC development (VHDL/Verilog/SystemVerilog) Experience with high-speed interfaces (e.g., PCIe, Ethernet, DDR, SERDES) Proven ability to lead technical teams or large work packages Experience with requirements management and verification methodologies Understanding of signal integrity, timing analysis, and hardware debugging Degree (or equivalent experience) in Electronic Engineering or related discipline Desirable: Experience in safety-critical or regulated industries Knowledge of secure or resilient system design Familiarity with DOORS, MATLAB, or similar tools Chartered Engineer status (or working towards)
Principal Digital Electronics Engineer 12 months 84.55 per hour (inside IR35) Hybrid working (Portsmouth) About the Opportunity We are seeking a Principal Digital Electronics Engineer to help deliver advanced electronic solutions across some of the most complex and high-profile defence and security programmes in the UK. This is a technical leadership role where you will shape digital hardware architectures, influence system-level design decisions, and mentor engineers across the full product lifecycle - from concept through to production and in-service support. What You'll Be Doing Lead the architecture, design and development of complex digital electronic systems Define and review FPGA, SoC, and high-speed digital designs Oversee requirements capture, design documentation, and verification strategies Provide technical authority and governance across multiple projects Support system integration, validation, and qualification activities Collaborate with systems, software, firmware, mechanical and safety teams Engage with customers and suppliers at a technical level Mentor and develop senior and junior engineers Drive continuous improvement in engineering processes and standards Your Skills & Experience Essential: Extensive experience in digital electronics design Strong background in FPGA/ASIC development (VHDL/Verilog/SystemVerilog) Experience with high-speed interfaces (e.g., PCIe, Ethernet, DDR, SERDES) Proven ability to lead technical teams or large work packages Experience with requirements management and verification methodologies Understanding of signal integrity, timing analysis, and hardware debugging Degree (or equivalent experience) in Electronic Engineering or related discipline Desirable: Experience in safety-critical or regulated industries Knowledge of secure or resilient system design Familiarity with DOORS, MATLAB, or similar tools Chartered Engineer status (or working towards)
Mar 10, 2026
Contractor
Principal Digital Electronics Engineer 12 months 84.55 per hour (inside IR35) Hybrid working (Portsmouth) About the Opportunity We are seeking a Principal Digital Electronics Engineer to help deliver advanced electronic solutions across some of the most complex and high-profile defence and security programmes in the UK. This is a technical leadership role where you will shape digital hardware architectures, influence system-level design decisions, and mentor engineers across the full product lifecycle - from concept through to production and in-service support. What You'll Be Doing Lead the architecture, design and development of complex digital electronic systems Define and review FPGA, SoC, and high-speed digital designs Oversee requirements capture, design documentation, and verification strategies Provide technical authority and governance across multiple projects Support system integration, validation, and qualification activities Collaborate with systems, software, firmware, mechanical and safety teams Engage with customers and suppliers at a technical level Mentor and develop senior and junior engineers Drive continuous improvement in engineering processes and standards Your Skills & Experience Essential: Extensive experience in digital electronics design Strong background in FPGA/ASIC development (VHDL/Verilog/SystemVerilog) Experience with high-speed interfaces (e.g., PCIe, Ethernet, DDR, SERDES) Proven ability to lead technical teams or large work packages Experience with requirements management and verification methodologies Understanding of signal integrity, timing analysis, and hardware debugging Degree (or equivalent experience) in Electronic Engineering or related discipline Desirable: Experience in safety-critical or regulated industries Knowledge of secure or resilient system design Familiarity with DOORS, MATLAB, or similar tools Chartered Engineer status (or working towards)
Tunnelling Site Manager (Utilities) Working for Hays on behalf of a market leading specialist tunnelling contractor, this is an opportunity to help deliver a major programme of utility tunnelling and associated shaft works in Northampton. You'll be acting as a key subcontractor partner to a tier one principal contractor, overseeing safe, timely and high quality delivery out on site. Your new role Lead day to day site delivery of utility tunnelling operations, including shaft sinking and temporary works. Plan works and sequences with the principal contractor and utility owners; coordinate interfaces across civils, MEICA and reinstatement teams. Own H&S leadership on site: daily briefings, RAMS and permits, compliance with CDM, confined space and lifting procedures. Drive programme, quality and productivity: manage ITPs/ITCs, QA records, progress reporting, materials/plant and subcontractor performance. Collaborate with engineering and commercial teams on change control, measures and cost/value, ensuring variations are documented and agreed. What you'll need to succeed Background & experience Proven track record delivering utilities tunnelling as a subcontractor on major civils/utilities schemes. Hands on experience of microtunnelling/AVN, pipe jacking, auger boring, shaft sinking/caissons; TBM or SCL exposure is a plus. Strong site leadership, stakeholder management and interface control with principal contractors and utility asset owners. Confident with RAMS, ITPs/QA, permits, temporary works, and short term look ahead planning. Qualifications & tickets CSCS (Managers & Professionals or Supervisory card). Temporary Works Coordinator (TWC) or Temporary Works Supervisor (TWS). - Advantageous NRSWA (Supervisor/Operative) for street works interfaces. - Advantageous CAT & Genny competence. Tunnel Safety Training Scheme (TSTS) / Tunnel Safety Card (TSC) highly desirable. Full UK driving licence. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
Mar 10, 2026
Seasonal
Tunnelling Site Manager (Utilities) Working for Hays on behalf of a market leading specialist tunnelling contractor, this is an opportunity to help deliver a major programme of utility tunnelling and associated shaft works in Northampton. You'll be acting as a key subcontractor partner to a tier one principal contractor, overseeing safe, timely and high quality delivery out on site. Your new role Lead day to day site delivery of utility tunnelling operations, including shaft sinking and temporary works. Plan works and sequences with the principal contractor and utility owners; coordinate interfaces across civils, MEICA and reinstatement teams. Own H&S leadership on site: daily briefings, RAMS and permits, compliance with CDM, confined space and lifting procedures. Drive programme, quality and productivity: manage ITPs/ITCs, QA records, progress reporting, materials/plant and subcontractor performance. Collaborate with engineering and commercial teams on change control, measures and cost/value, ensuring variations are documented and agreed. What you'll need to succeed Background & experience Proven track record delivering utilities tunnelling as a subcontractor on major civils/utilities schemes. Hands on experience of microtunnelling/AVN, pipe jacking, auger boring, shaft sinking/caissons; TBM or SCL exposure is a plus. Strong site leadership, stakeholder management and interface control with principal contractors and utility asset owners. Confident with RAMS, ITPs/QA, permits, temporary works, and short term look ahead planning. Qualifications & tickets CSCS (Managers & Professionals or Supervisory card). Temporary Works Coordinator (TWC) or Temporary Works Supervisor (TWS). - Advantageous NRSWA (Supervisor/Operative) for street works interfaces. - Advantageous CAT & Genny competence. Tunnel Safety Training Scheme (TSTS) / Tunnel Safety Card (TSC) highly desirable. Full UK driving licence. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
Design Manager - Overhead Line (OLE) CP7 E&P Framework ARQ Location Western & Wales Route - office and site based with regional travel (Main Office Dawley Road, Hayes) Work Structure Hybrid - x3 days per week in Dawley Road, London Salary Up to 70,000 per annum Reporting To Programme Manager / Engineering Manager Role Purpose Responsible for the management and assurance of Overhead Line Equipment (OLE) design activities across the Western & Wales Route. The role ensures designs are safe, compliant, coordinated, and delivered to programme, supporting efficient construction and maintenance of electrified infrastructure. Key Responsibilities Manage the production and delivery of OLE designs for maintenance, renewals, and enhancement schemes. Ensure all designs comply with Network Rail standards, Electrical Safety Rules, and route-specific requirements. Lead the design development process from feasibility through detailed design and handback. Coordinate OLE design interfaces with other disciplines including civils, track, signalling, and power. Manage design programme, resources, and deliverables to meet agreed milestones. Ensure constructability, access, and possession requirements are considered within designs. Manage technical assurance, including design reviews, independent checks, and approvals. Support change control, design risk management, and value engineering initiatives. Provide technical support to delivery teams during construction and commissioning. Interface with Network Rail Asset Engineers, Project Managers, and external design houses. Knowledge, Skills & Experience Essential Proven experience managing OLE design within the UK rail industry. Strong knowledge of Network Rail OLE standards and Western & Wales Route requirements. Experience coordinating multi-disciplinary rail designs. Ability to manage complex design programmes and technical risk. Strong communication and stakeholder management skills. Desirable Experience on Western Route electrification assets. Knowledge of GRIP / PACE or equivalent project lifecycle processes. Qualifications & Competence Essential Degree or HNC/HND in Electrical, Mechanical, or Civil Engineering (or equivalent experience). Experience working under CDM Regulations (Designer or Principal Designer awareness). Desirable Chartered or working towards chartership (IEng / CEng). Relevant Network Rail design assurance or CRE experience. Key Behaviours Safety and quality focused Technically robust and detail oriented Collaborative and delivery aligned Proactive and organised We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Mar 10, 2026
Full time
Design Manager - Overhead Line (OLE) CP7 E&P Framework ARQ Location Western & Wales Route - office and site based with regional travel (Main Office Dawley Road, Hayes) Work Structure Hybrid - x3 days per week in Dawley Road, London Salary Up to 70,000 per annum Reporting To Programme Manager / Engineering Manager Role Purpose Responsible for the management and assurance of Overhead Line Equipment (OLE) design activities across the Western & Wales Route. The role ensures designs are safe, compliant, coordinated, and delivered to programme, supporting efficient construction and maintenance of electrified infrastructure. Key Responsibilities Manage the production and delivery of OLE designs for maintenance, renewals, and enhancement schemes. Ensure all designs comply with Network Rail standards, Electrical Safety Rules, and route-specific requirements. Lead the design development process from feasibility through detailed design and handback. Coordinate OLE design interfaces with other disciplines including civils, track, signalling, and power. Manage design programme, resources, and deliverables to meet agreed milestones. Ensure constructability, access, and possession requirements are considered within designs. Manage technical assurance, including design reviews, independent checks, and approvals. Support change control, design risk management, and value engineering initiatives. Provide technical support to delivery teams during construction and commissioning. Interface with Network Rail Asset Engineers, Project Managers, and external design houses. Knowledge, Skills & Experience Essential Proven experience managing OLE design within the UK rail industry. Strong knowledge of Network Rail OLE standards and Western & Wales Route requirements. Experience coordinating multi-disciplinary rail designs. Ability to manage complex design programmes and technical risk. Strong communication and stakeholder management skills. Desirable Experience on Western Route electrification assets. Knowledge of GRIP / PACE or equivalent project lifecycle processes. Qualifications & Competence Essential Degree or HNC/HND in Electrical, Mechanical, or Civil Engineering (or equivalent experience). Experience working under CDM Regulations (Designer or Principal Designer awareness). Desirable Chartered or working towards chartership (IEng / CEng). Relevant Network Rail design assurance or CRE experience. Key Behaviours Safety and quality focused Technically robust and detail oriented Collaborative and delivery aligned Proactive and organised We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Jonathan Lee Recruitment Ltd
Flitwick, Bedfordshire
Principal Engineer - Design Lead - Defence Sector - Permanent - Attractive Buckinghamshire A Principal Engineer - Design Lead is needed for an established supplier of engineering solutions for the defence sector. They specialise in the design, manufacture and support of control systems, and power systems for defence platforms within the safety critical and harsh environment domain. The Principal Engineer - Design Lead will lead the design and development of new equipment, primarily with mechanical but also electrical skills. The Principal Engineer - Design Lead must be creative, inquisitive, keen to learn, question everything and have an eye for detail. With the support of the Technical Director the Principal Engineer - Design Lead role also covers the full product life cycle, and you must take the technical lead, the design authority role and develop into a subject matter expert (SME). The Principal Engineer - Design Lead will have a broad range of experience and skills within mechanical design, sheet metal fabrication, manufacturing and prototyping, product development, CAD, and project management but also a good understanding of other manufacturing methods and electrical design. This opportunity will have 3 6 months of Training and Development built in. Key Duties for the Principal Engineer - Design Lead Product development, designing new solutions to meet complex customer requirements. Lead a team of mechanical engineers to design and develop solutions for customers. Create concepts, managing design compliance and regulatory compliance. Ensure solutions are viable and designed efficiently for manufacture and assembly. Be a technical point of contact for customers and accountable for successful delivery of projects. Drive the team towards excellence by improving standards and processes. Mentoring, motivating, and developing the teams skills and capabilities. May be required to help with general engineering tasks and CAD to support day to day activities. Create effective technical reports to support bid responses, etc. Providing design justifications, managing the design process, and managing the product lifecycle. Designing, prototyping, and developing electro-mechanical products. Substantiating designs using analytical methods, FEA software, and other simulation tools. Developing high quality, cost effective and production ready designs in 3D CAD. Promote a culture of excellence and team expertise in DFMA. Conducting material selection, evaluation, and leading internal and external design reviews with customers. The certification and compliance management and developing comprehensive technical documentation. Managing configuration control, product safety, and obsolescence. Providing peer review of drawings, reports, and other engineering output Assisting in the development of company procedures, codes of practise and work instructions. Promoting continual improvement and contributing to business process improvements. Key Skills/Experience Required for the Principal Engineer - Design Lead Knowledge and experience and a background in design and development. Designing for sheet metal fabrication and associated manufacturing techniques. Experience in analysis, e.g. Stress, CFD, FEA etc, using associated software tools, ideally NASTRAN. Demonstrable mechanical design experience and knowledge of Autodesk Inventor 3D CAD is desirable. A background in the naval, marine or defence sectors would be advantageous. Qualified with the equivalent of a UK degree or have significant relevant industry experience. Ability to analyse complex technical issues and develop innovative solutions for customers and clients. Strong problem-solving and project management ability with clear & effective communication, both written and verbal. Ability to produce concept designs to satisfy a customer s equipment specification. Familiar with and able to understand standards e.g. DEF STANS to identify relevant requirements. Confident in design justification, hand calculations, simulations, project management, and testing. Articulate and able to influence stakeholders for an optimal solution with effective presentations. Able to work with cross-functional teams, including engineers, designers, and other stakeholders. Writing test specifications, test requirements, ITPs, and documents to demonstrate compliance. Prepared to challenge existing SME, question traditional solutions and to drive innovation. Courageous and innovative mindset, unafraid to challenge conventional thinking. Motivating, able to plan own time, priorities, and deadlines to ensure project success. Candidates must be British Nationals as full UK Security Clearance (SC) may be required, and this is due to the nature of the Defence products involved Demand for this role will undoubtedly be high, and interviews will be arranged very soon. If you have the right experience and you want to be considered, please apply today. If you have any questions about the Principal Engineer - Design Lead role, please contact Peter Heap at Jonathan Lee Recruitment on (phone number removed) or send suitable CV s to (url removed) Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Mar 10, 2026
Full time
Principal Engineer - Design Lead - Defence Sector - Permanent - Attractive Buckinghamshire A Principal Engineer - Design Lead is needed for an established supplier of engineering solutions for the defence sector. They specialise in the design, manufacture and support of control systems, and power systems for defence platforms within the safety critical and harsh environment domain. The Principal Engineer - Design Lead will lead the design and development of new equipment, primarily with mechanical but also electrical skills. The Principal Engineer - Design Lead must be creative, inquisitive, keen to learn, question everything and have an eye for detail. With the support of the Technical Director the Principal Engineer - Design Lead role also covers the full product life cycle, and you must take the technical lead, the design authority role and develop into a subject matter expert (SME). The Principal Engineer - Design Lead will have a broad range of experience and skills within mechanical design, sheet metal fabrication, manufacturing and prototyping, product development, CAD, and project management but also a good understanding of other manufacturing methods and electrical design. This opportunity will have 3 6 months of Training and Development built in. Key Duties for the Principal Engineer - Design Lead Product development, designing new solutions to meet complex customer requirements. Lead a team of mechanical engineers to design and develop solutions for customers. Create concepts, managing design compliance and regulatory compliance. Ensure solutions are viable and designed efficiently for manufacture and assembly. Be a technical point of contact for customers and accountable for successful delivery of projects. Drive the team towards excellence by improving standards and processes. Mentoring, motivating, and developing the teams skills and capabilities. May be required to help with general engineering tasks and CAD to support day to day activities. Create effective technical reports to support bid responses, etc. Providing design justifications, managing the design process, and managing the product lifecycle. Designing, prototyping, and developing electro-mechanical products. Substantiating designs using analytical methods, FEA software, and other simulation tools. Developing high quality, cost effective and production ready designs in 3D CAD. Promote a culture of excellence and team expertise in DFMA. Conducting material selection, evaluation, and leading internal and external design reviews with customers. The certification and compliance management and developing comprehensive technical documentation. Managing configuration control, product safety, and obsolescence. Providing peer review of drawings, reports, and other engineering output Assisting in the development of company procedures, codes of practise and work instructions. Promoting continual improvement and contributing to business process improvements. Key Skills/Experience Required for the Principal Engineer - Design Lead Knowledge and experience and a background in design and development. Designing for sheet metal fabrication and associated manufacturing techniques. Experience in analysis, e.g. Stress, CFD, FEA etc, using associated software tools, ideally NASTRAN. Demonstrable mechanical design experience and knowledge of Autodesk Inventor 3D CAD is desirable. A background in the naval, marine or defence sectors would be advantageous. Qualified with the equivalent of a UK degree or have significant relevant industry experience. Ability to analyse complex technical issues and develop innovative solutions for customers and clients. Strong problem-solving and project management ability with clear & effective communication, both written and verbal. Ability to produce concept designs to satisfy a customer s equipment specification. Familiar with and able to understand standards e.g. DEF STANS to identify relevant requirements. Confident in design justification, hand calculations, simulations, project management, and testing. Articulate and able to influence stakeholders for an optimal solution with effective presentations. Able to work with cross-functional teams, including engineers, designers, and other stakeholders. Writing test specifications, test requirements, ITPs, and documents to demonstrate compliance. Prepared to challenge existing SME, question traditional solutions and to drive innovation. Courageous and innovative mindset, unafraid to challenge conventional thinking. Motivating, able to plan own time, priorities, and deadlines to ensure project success. Candidates must be British Nationals as full UK Security Clearance (SC) may be required, and this is due to the nature of the Defence products involved Demand for this role will undoubtedly be high, and interviews will be arranged very soon. If you have the right experience and you want to be considered, please apply today. If you have any questions about the Principal Engineer - Design Lead role, please contact Peter Heap at Jonathan Lee Recruitment on (phone number removed) or send suitable CV s to (url removed) Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Principal Product Security Engineer 12 Month Contract (Hybrid, 2-3 days per week on site) - Frimley, Barrow or Weymouth Based 85.40 an hour Umbrella Inside IR35 This is a great opportunity to work within one of the UKs leading Defence companies based in Frimley. Hybrid, 2-3 days per week on site. Knowledge, Skills and Qualifications Knowledge: The PSA Principal Engineer will have a good understanding of the applicable regulations, standards, policies and guidance on information risk management, to be able to identify, analyse and evaluate information risks. They will be able to document and present risk management options to the business and participate in discussions. Good understanding of information security principles and is able to advise on the potential impact to Product Systems. Knowledge of security related activities required to support the engineering lifecycle with experience of operating in the phase relevant to the role. The PSA Principal Engineer will have a working knowledge of the cyber security and information assurance marketplace, including products, suppliers and key threats, and will also have an understanding of the direction of potential future technologies. Proven experience of assessing and managing information risk in line with industry good practice. Experience of assessing and advising on controls to support Product Safety. Proven experience of applying Product Security/Information Security concepts to applicable technologies within the environment (or similar). Supports and contributes to information security professional bodies and industry forums. Can demonstrate experience of mentoring and/or providing support to others. Skills: - They will be able to speak knowledgably and credibly with customer, user and internal stakeholders to explain the causes of information risks, their likelihood and potential operational and business impacts. - Experience of Product Security Engineering activities in the defence, maritime or closely linked domain. - Can demonstrate continuous improvement, professional development and awareness of current industry good practice. Qualifications: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Holds NCSC CCP SIRA status (or able to achieve) Is a member of a professional institute For more information please contact Lauren Morley at JAM Recruitment or click apply.
Mar 10, 2026
Contractor
Principal Product Security Engineer 12 Month Contract (Hybrid, 2-3 days per week on site) - Frimley, Barrow or Weymouth Based 85.40 an hour Umbrella Inside IR35 This is a great opportunity to work within one of the UKs leading Defence companies based in Frimley. Hybrid, 2-3 days per week on site. Knowledge, Skills and Qualifications Knowledge: The PSA Principal Engineer will have a good understanding of the applicable regulations, standards, policies and guidance on information risk management, to be able to identify, analyse and evaluate information risks. They will be able to document and present risk management options to the business and participate in discussions. Good understanding of information security principles and is able to advise on the potential impact to Product Systems. Knowledge of security related activities required to support the engineering lifecycle with experience of operating in the phase relevant to the role. The PSA Principal Engineer will have a working knowledge of the cyber security and information assurance marketplace, including products, suppliers and key threats, and will also have an understanding of the direction of potential future technologies. Proven experience of assessing and managing information risk in line with industry good practice. Experience of assessing and advising on controls to support Product Safety. Proven experience of applying Product Security/Information Security concepts to applicable technologies within the environment (or similar). Supports and contributes to information security professional bodies and industry forums. Can demonstrate experience of mentoring and/or providing support to others. Skills: - They will be able to speak knowledgably and credibly with customer, user and internal stakeholders to explain the causes of information risks, their likelihood and potential operational and business impacts. - Experience of Product Security Engineering activities in the defence, maritime or closely linked domain. - Can demonstrate continuous improvement, professional development and awareness of current industry good practice. Qualifications: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Holds NCSC CCP SIRA status (or able to achieve) Is a member of a professional institute For more information please contact Lauren Morley at JAM Recruitment or click apply.
Mechanical Engineering is excited to offer multiple opportunities for experienced Principal Mechanical Design Engineers, with roles available across all areas of the Product Life Cycle, from mechanical future concepts and detailed design through qualification, production, and in-service support. In these roles of responsibility, you will lead the development of mechanical solutions for a wide variety of complex weapons and weapon systems, working closely with multi-disciplinary teams across engineering, manufacturing, quality, and supply chain. You will be expected to provide technical leadership, drive design maturity, and act as a key interface with internal and external stakeholders. Salary: Circa £50,000+ depending on experience Location: Stevenage (relocation package may be available) Dynamic (Hybrid) Working: An average of 2-3 days per week on-site dependent on work classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The Opportunity: The roles offer the chance to lead complex mechanical design work packages on critical defence products and influence design decisions across the full life cycle. You will play a key role in ensuring designs meet performance, safety, cost, and schedule requirements. The roles provide excellent long-term career progression opportunities within MBDA, including further technical leadership or engineering management pathways. Appointments will be made at an appropriate level based on skills and experience. What we're looking for from you: Ideally Degree, HND, or HNC in Mechanical Engineering (or equivalent) with significant industry experience Proven ability to lead mechanical design work packages within multi-disciplinary teams Strong experience across full product life cycles, from concept to in-service support In-depth knowledge of design proving and qualification activities Robust hands-on experience with design methodologies such as DFMEA, DFA, and DFM Strong communication skills with the ability to influence, negotiate, and make technical decisions Experience engaging with and developing suppliers and external partners Ability to manage priorities, assess risk, and mentor less experienced engineers Understanding of structural, thermal, and/or dynamic analysis (advantageous) Relevant 3D CAD/CAE experience (training provided on company tools) Note: This role may involve UK travel and occasional European travel. Interested? Click Apply Now! Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Mar 07, 2026
Full time
Mechanical Engineering is excited to offer multiple opportunities for experienced Principal Mechanical Design Engineers, with roles available across all areas of the Product Life Cycle, from mechanical future concepts and detailed design through qualification, production, and in-service support. In these roles of responsibility, you will lead the development of mechanical solutions for a wide variety of complex weapons and weapon systems, working closely with multi-disciplinary teams across engineering, manufacturing, quality, and supply chain. You will be expected to provide technical leadership, drive design maturity, and act as a key interface with internal and external stakeholders. Salary: Circa £50,000+ depending on experience Location: Stevenage (relocation package may be available) Dynamic (Hybrid) Working: An average of 2-3 days per week on-site dependent on work classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The Opportunity: The roles offer the chance to lead complex mechanical design work packages on critical defence products and influence design decisions across the full life cycle. You will play a key role in ensuring designs meet performance, safety, cost, and schedule requirements. The roles provide excellent long-term career progression opportunities within MBDA, including further technical leadership or engineering management pathways. Appointments will be made at an appropriate level based on skills and experience. What we're looking for from you: Ideally Degree, HND, or HNC in Mechanical Engineering (or equivalent) with significant industry experience Proven ability to lead mechanical design work packages within multi-disciplinary teams Strong experience across full product life cycles, from concept to in-service support In-depth knowledge of design proving and qualification activities Robust hands-on experience with design methodologies such as DFMEA, DFA, and DFM Strong communication skills with the ability to influence, negotiate, and make technical decisions Experience engaging with and developing suppliers and external partners Ability to manage priorities, assess risk, and mentor less experienced engineers Understanding of structural, thermal, and/or dynamic analysis (advantageous) Relevant 3D CAD/CAE experience (training provided on company tools) Note: This role may involve UK travel and occasional European travel. Interested? Click Apply Now! Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 07, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 07, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 07, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 07, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 07, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 07, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 07, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 07, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 07, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Coventry - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Working as part of an Integrated Development Team, established to develop and deliver submarine systems/capability Specifically focusing on ensuring that Product Safety tasking and activities are completed across multiple systems in support of project milestones through all stages of Engineering Life Cycle Management Supporting Hazard Identification and Analysis studies Assisting with or generating safety reports Ensuring the Integrated Development Team operates within the project Safety Management System Liaising with other Integrated Development Teams and the Whole Boat Safety Team Your skills and experiences: Obtained or predicted 2:2 in a Bachelor's or Master 's Engineering degree An understanding of 'Safety and Systems Engineering' and of the 'Engineering Life Cycle Management ' Experience working and delivering tasks as part of team, but also capable of working and delivering tasks unsupervised The ability to be agile in working practices and customer expectations Self-motivated, with good verbal and written communication skills Practical experience as a Product Safety Engineer in the maritime defence sector is preferable, although experience in other sectors will be considered Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety Team To support our ongoing need to recruit the best engineering talent, BAE Systems Submarines is delighted to shortly be opening a brand-new office in Coventry. BAE Systems Submarines is experiencing a period of significant growth, and we are now actively recruiting a variety of roles and specialisms to support our ongoing submarines programs which is critical to delivering our national endeavour. If you are interested in understanding how submarines operate and how the Royal Navy operate the submarines, then this role is for you. As a Product Safety Engineer, you will assist System Engineers in influencing submarine systems and capability development. You will develop an understanding of how submarine systems work and work together and ensure that the system of system interactions considers Product Safety appropriately. The role will provide the opportunity to be involved in all aspects of safety management and safety case delivery. This includes safety requirements capture and management , hazard identification and analysis , hazard data management , application of the ALARP principle , creation/maintenance of safety documentation and continuous improvement of the safety management system. The role provides a real opportunity to gain a broad overview of a complex system (i.e. submarine). We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Principal Test Equipment Engineer Edinburgh 12-month contract Paying up to 74p/h (inside IR35) Overview: As the Principal Test Equipment Engineer, you?ll work within a multi-disciplinary engineering environment, helping to deliver complex Automatic Test Equipment (ATE) systems and ensuring they meet the needs of both internal and external stakeholders. What You?ll Do Lead the creation and delivery of technical solutions within defined work packages, ensuring alignment with stakeholder requirements Develop and deploy test programs for ATE systems Integrate hardware and software test programs, including NI TestStand environments Design systems, interfaces, and cable assemblies Collaborate closely with IPT functions, production teams, and external customer stakeholders Provide expert guidance on tools, techniques, and best practices for test equipment design Resolve emerging technical issues, escalating complex risk,s and supporting mitigation strategies Build strong internal and external networks, promoting continuous improvement and best practice adoption Mentor, coach, and develop engineers across the wider team What You?ll Bring Proven experience developing technical solutions within multi-disciplinary engineering teams Integration experience using languages such as CVI, C, and C++ Experience integrating within NI TestStand environments LF/Digital and/or RF/microwave hardware integration experience Offsite or overseas test integration exposure Hands-on experience across the full hardware design lifecycle Understanding of product safety legislation Strong ability to capture and analyse stakeholder needs Excellent interpersonal and collaboration skills, with the ability to influence and adapt Experience working with a wide range of internal and external stakeholders, including customers and suppliers Demonstrated ability to coach and develop others Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Mar 07, 2026
Contractor
Principal Test Equipment Engineer Edinburgh 12-month contract Paying up to 74p/h (inside IR35) Overview: As the Principal Test Equipment Engineer, you?ll work within a multi-disciplinary engineering environment, helping to deliver complex Automatic Test Equipment (ATE) systems and ensuring they meet the needs of both internal and external stakeholders. What You?ll Do Lead the creation and delivery of technical solutions within defined work packages, ensuring alignment with stakeholder requirements Develop and deploy test programs for ATE systems Integrate hardware and software test programs, including NI TestStand environments Design systems, interfaces, and cable assemblies Collaborate closely with IPT functions, production teams, and external customer stakeholders Provide expert guidance on tools, techniques, and best practices for test equipment design Resolve emerging technical issues, escalating complex risk,s and supporting mitigation strategies Build strong internal and external networks, promoting continuous improvement and best practice adoption Mentor, coach, and develop engineers across the wider team What You?ll Bring Proven experience developing technical solutions within multi-disciplinary engineering teams Integration experience using languages such as CVI, C, and C++ Experience integrating within NI TestStand environments LF/Digital and/or RF/microwave hardware integration experience Offsite or overseas test integration exposure Hands-on experience across the full hardware design lifecycle Understanding of product safety legislation Strong ability to capture and analyse stakeholder needs Excellent interpersonal and collaboration skills, with the ability to influence and adapt Experience working with a wide range of internal and external stakeholders, including customers and suppliers Demonstrated ability to coach and develop others Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
