241 jobs found

An excellent opportunity for an experienced Project Design Engineer to join a well-established company based in Birtley, Gateshead. Job Type: Full-Time, Permanent. Location: Gateshead. Salary: Starting from £37,000 per annum About the Role: The company's Design Engineers are responsible for technical project delivery of hydraulic systems. Their duties are to design, plan and deliver projects to meet customer needs. The scope of the engineering builds may include hydraulic power units, control consoles, bespoke hydraulic systems, and manifolds. The project owner will be responsible for providing the technical information and documentation to the customer, suppliers, sub-contractors and our hydraulic technicians. They will be maintaining constant communication with the customer and ensure that all commercial, technical, and financial targets are met. As part of this role there is an expectation that the project owner will have presence in the workshop and on- site and may be involved in activities such as mechanical assembly and commissioning. This position will be a varied and challenging role with positive opportunities for a motivated individual to develop the position to achieve their own career goals. Main Duties: Communication with customer Review and clarify customer requirements Prepare engineering drawings and hydraulic schematics Prepare quotations and technical specifications Carry out engineering calculations Select and size components to optimise system performance and cost Resolve problems and improve manufacturability and serviceability of products Prepare technical specification for sub-contractors Prepare technical documents for work files such as, work instructions & risk assessments, mechanical and electrical drawings, hydraulic schematics, technical procedures, and reports Support technicians and engineers during testing and commissioning Control work after completion and issue the as-built final documents Ensure compliance with customer requirements Ensure that project financial targets are met Review the project KPIs for debriefing Attend site or workshop when required Supporting in all areas of work where appropriate Embrace and support company values Candidate Requirements: 2:1 Bachelor degree or equivalent in mechanical engineering Minimum 3 years' experience Ability to carry out engineering calculations Knowledge of hydraulic, mechanical, and electrical/control system Time management skills to handle multi-tasking Understanding of manufacturing processes and construction methods Good knowledge of computer assisted design (CAD) software - Autodesk Inventor preferred Interest in working both in a desk and workshop environment Creative approach for generating new ideas Strong background in math and science Clear communicator both written and verbal Skilled in Microsoft Office packages including Excel and Word Eligible to work permanently in the UK. Full driving license KPI's: On time, specification and in budget delivery of own projects at all time Ensure compliance of designs to customer specification and standards at all time Preparation of tenders and quotations on time with at least 10% conversion rate. If you feel that you have the relative skills/attributes to fulfil this role then please apply now! The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.

Lab Technician 6-month initial contract Based in Wolverhampton (onsite working) 21 per hour (Inside IR35), 39 hrs pw Applicants MUST have proof of immediate, on-going and valid eligibility, to work full time, and travel within, the UK About the company I am currently recruiting on behalf of an automotive OEM, based in Wolverhampton, who are looking for a Lab Technician to join their team. Job Description As Lab Technician, your main responsibilities will include: Use metallurgical & mechanical prep & test equipment, to assess components Carry out routine quality control testing for EDU, Battery and Frame Assembly Perform teardowns of stators and frames, using destructive equipment, e.g. Bandsaws. Perform visual weld inspection testing and ultrasonic testing of spot welds. Use optical microscopes to measure welds, rivets and porosity content. Qualifications/Skills needed: Prep equipment (e.g. bandsaws, abrasive cutters, grinding, polishing, etching). Materials testing equipment (optical microscopes, hardness, tensile, composition). Metallurgical knowledge of steel and aluminium, and experience in applying. Able to interpret Engineering drawings and Specifications. Minimum level 3 qualification in a relevant engineering, science or welding field. Welding (pref.) Why work through Contechs? Contechs is a leading Automotive, Design, Engineering, Technology and Innovation Recruitment Consultancy. Founded in 1997, with an inhouse Contractor Care Team to support all external employees, acts as an employment agency for permanent and contract recruitment. How to Apply If you're interested in applying for this position, submit your application and one of our recruiters will be in touch. If you know anyone that is suitable for the role, please visit the below page where we offer up to 600 referral fee: (url removed)>

Proactive currently has an opening for the below role: Assembly & Build Technician in Wallingford OX10 As an Assembly & Build Technician you will be joining an agile and high performing team where your role will be to assemble and commission all robot subsystems and complete robot builds to strict standards, allowing us to deliver our groundbreaking technology around the globe. Your work will mostly often be divided between sub-system and robot assembly. Assembly of sub-systems Assist in the Assembly of complete robots Contribute to research and development projects Support the assembly process through various continuous improvement projects Support the wider business as required Essential Requirements: Experience of working in a technical function; both autonomously and as part of a team. Experienced in manual build and assembly processes of complex, high precision mechanical, and electrical systems Accountable for build and preparation of complete products to a strict schedule and quality Experience inspecting, testing and signing off for production completed sub-systems Working knowledge of Health and Safety procedures Salary up to 40k/annum - negotiable depending on previous experience Shift Hours : Normal Further information is available on request If you are interested please apply by sending a copy of your cv to (url removed) to avoid missing out on these incredible opportunities Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

Proactive currently has an opening for the below role: Assembly & Build Technician in Wallingford OX10 As an Assembly & Build Technician you will be joining an agile and high performing team where your role will be to assemble and commission all robot subsystems and complete robot builds to strict standards, allowing us to deliver our groundbreaking technology around the globe. Your work will mostly often be divided between sub-system and robot assembly. Assembly of sub-systems Assist in the Assembly of complete robots Contribute to research and development projects Support the assembly process through various continuous improvement projects Support the wider business as required Essential Requirements: Experience of working in a technical function; both autonomously and as part of a team. Experienced in manual build and assembly processes of complex, high precision mechanical, and electrical systems Accountable for build and preparation of complete products to a strict schedule and quality Experience inspecting, testing and signing off for production completed sub-systems Working knowledge of Health and Safety procedures Salary up to 40k/annum - negotiable depending on previous experience Shift Hours : Normal Further information is available on request If you are interested please apply by sending a copy of your cv to (url removed) to avoid missing out on these incredible opportunities Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

Soldering Technician Required ASAP Basingstoke. 27-30K/Annum (Negotiable depending on previous experience) Role: Soldering Technician Location: Basingstoke Salary: 27-30K/Annum Duration: Permanent Soldering Technician Required ASAP in Basingstoke. Interested candidates must have previous soldering and wiring experience. PCB Assembly/soldering experience would also be advantageous. Benfits include Competetive Salary Package Pension scheme - employer contribution up to 8% Life Assurance Annual Leave 25 days plus bank holidays - rising to 30 days with service Personal development opportunities Free on site Parking Further information is available on request If you have the above skills and wish to be considered for this position or find out more details then please contact Max Cannon on (phone number removed) or submit your CV to (url removed) alternatively, apply to this advert! Proactive also offer a referral scheme for successful applicants - if you know anyone that could be suited to this position then please contact Proactive with there details and if they are placed by Proactive you will receive 250. T&Cs apply Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

SMT Process Technician Salary: £26,500 to £32,000 depending on experience Location: On site in Huntingdon Hours: Monday to Thursday: 8:00am to 4:15pm Friday: 8:00am to 2:00pm A well established electronics manufacturing business is seeking an SMT Process Technician to support SMT and selective soldering operations within a busy production environment. The role You will support the setup, operation, and optimisation of SMT and PTH assembly processes to ensure high quality PCB builds. Key responsibilities: Setting up and operating SMT and selective soldering equipment Supporting changeovers and component loading Creating and adjusting printer, reflow, and soldering profiles for new products Supporting NPI builds and First Article Inspection Carrying out preventative maintenance and troubleshooting process faults Optimising AOI performance and improving line efficiency Working to IPC-A-610 standards and maintaining documentation Handling ESD and MSD components in line with H&S and CoSHH requirements Person specification Essential 2 to 3 years experience with SMT and or PTH selective soldering equipment Strong understanding of SMT processes and fault finding Ability to read drawings and BOMs Good IT skills and confidence with computers GCSEs in Maths, English, and Science Anyone who has worked with CNC machinery or similar Desirable IPC 7711 or 7721 certification Rework and hand soldering experience This role suits a practical, detail focused technician looking for stable on site hours and an early Friday finish. If you are interested in the role of SMT Process Technician and feel that you have the relevant experience, please contact your Recruitment Partner, Lisa Logan at Unicorn Resourcing. If this job isn't exactly right for you but you're looking for something new, please contact us for a confidential career discussion. Unicorn Resourcing Limited is acting as an Employment Agency in regard to this Permanent opportunity.

Electronics Assembly Technician Required Horsham Duties: PCB assembly and wiring. Assembly of electro-mechanical systems. Prototype and test rig assembly and commissioning. General support of development engineers (extent depending on capabilities). Inspection of delivered components and sub-systems. System testing and recording of acquired data. Essential Experience: 3 years or more relevant industrial experience. Assembly of electronics instrumentation. Wiring and cable termination. Assembly of precision mechanical systems. System testing and result recording. Competent operation of test equipment. Conversant with PCs and application software. Ability to accurately follow work instructions. Ability to communicate findings of investigations and details of identified problems. Ability to self-motivate and work efficiently in isolation. Ability to work independently once showed what to do. Additional Info Basis: Temp to Perm Hours: 08:30 - 17:00 or 9:00 - 17:30 Mon - Fri, 1 hour lunch (37 hours per week) - this could be negotiable Salary range: 26,000 - 30,000 depending on experience and capabilities Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

Our client is a well-respected manufacturing organisation who operate within Aerospace sector. They are looking to expand their team and are keen to recruit someone who has a strong experience with mechanical assembly using a variety of hand tools. The ideal candidate will have previous experience carrying out a mechanical fitting/ installation role and would have worked engineering drawings. Production Technician Permanent Early and late shifts available Woking Production Technician Job Description Assembling products using technical drawings, Use of hand tools and power tools such as drills, grinders and sanders. Use of machine shop equipment including mill, lathe, saws, tube bender and hydraulic tube bender (experience not essential) Good attitude Production technician Essential Experience/Skills/Qualifications Experience within an assembly role Reading engineering drawings If you feel you're a good fit for this position, please click 'apply'

Our client, a prominent name in the aerospace sector, is seeking a dedicated Powerplant Technician to join their team. This permanent role is integral to the assembly, installation, and testing of aircraft powerplant systems for the Windracers ULTRA. The successful candidate will ensure that associated systems are commissioned in accordance with approved manufacturer requirements and company procedures. Key Responsibilities: Assembly and installation of powerplant systems as per approved drawings, work instructions, and company procedures Achieving production targets to support the overall manufacturing schedule Ensuring powerplant systems are safe, compliant, and ready for commissioning Reporting quality defects related to powerplant systems following standard procedures Performing second sign-off for completed powerplant work by others Supporting inspections, ground running, and functional testing of powerplant systems Providing technical guidance to UAV Technicians on powerplant-related tasks Contributing to continuous improvement processes for powerplant assembly, installation, commissioning, and testing Other responsibilities as agreed with your manager Maintaining health and safety standards at all times Adhering to company values, policies, procedures, and guidelines Job Requirements: Required: Experience working with aircraft, automotive, marine, or industrial powerplant systems Strong understanding of internal combustion engines, fuel systems, and associated controls Hands-on experience in engineering or manufacturing Experience in conducting engine ground runs or equivalent functional testing activities Ability to interpret and provide feedback on technical drawings, manuals, and work instructions Technical capability with good logical reasoning Adaptability and willingness to learn new skills Strong presentation and communication skills Right to work within the UK Vetting and security clearance (BPSS to be obtained within probation period) Desirable: IC engine fault-finding and diagnostic experience Experience working in regulated or safety-critical environments Proficiency with Microsoft Office 365 Experience using Jira or similar task allocation software Experience with MCAD and ECAD tools Knowledge of the UAV industry Professional Development: You will be expected to pursue a programme of continuous professional development in line with any relevant professional registration or statutory requirements while maintaining appropriate awareness of service provider requirements. If you have the relevant experience and are looking for a challenging and rewarding role in the aerospace industry, we encourage you to apply now.

Mechanical Assembly Test Technician required to perform technical and mechanical quality control tasks to support production, assembly, and testing processes. You will contribute to maintaining high quality standards and continuous improvement across manufacturing operations. Requirements Quality Control. Hands on experience in mechanical assembly, testing, or manufacturing environments. Familiarity with hydraulic, electronic, and mechanical systems. Responsibilities Perform technical duties across mechanical, electronic, and system-based projects. Conduct testing, measurements, and process controls on key production lines. Read and interpret engineering drawings and job documentation ( work orders, bills of materials). Troubleshoot and repair product or process issues. Maintain tools, machinery, and equipment to ensure operational efficiency. Support continuous improvement using modern manufacturing principles.

Our client, a leading player in the Defence & Security, Nuclear, and Aerospace sectors, is currently seeking a skilled Test Technician for a contract role. This is an exciting opportunity for individuals with a strong background in electronics testing, assembly, and fault diagnostics to work on critical projects within highly secure environments. Key Responsibilities: Testing electronic or electro-mechanical equipment (including low voltage, 110v, 230v, 440v and E.H.T. products) in accordance with the appropriate test specifications or instructions, utilising the test equipment Locating faults in electronic or electro-mechanical equipment under test to sub-assembly level Initiating corrective action and recording fault information as required Recognising faults on test equipment and initiating action for repair Maintaining good standards of housekeeping and cleanliness and complying with statutory safety regulations and relevant codes of practice Ensuring all paperwork (hard and soft copy) and electronic systems including ERP are completed accurately to ensure traceability Supporting the business with continuous improvement, 6S, and lean manufacturing Skills, Qualifications, and Experience: Experience of performing production testing using both commercial off the shelf and bespoke analogue test equipment Ability to follow and interpret manufacturing documentation such as drawings, bills of materials and production testing specifications Skilled in using standard test equipment consisting of, but not limited to, multimeters, oscilloscopes, and function generators Ability to fault find to sub-assembly level, read circuit diagrams, and wiring schedules Proficiency in Microsoft Office tools, particularly Word and Excel Good time management and task prioritisation skills with the ability to juggle various tasks Familiarity with ESD procedures and IPC-A-610/620 standards Desired Skills: Technical qualification in Electronics or equivalent Qualification to IPC-A-610/620 Experience in electrical assembly, precision cable preparation, and soldering If you have a robust background in electronics testing, with skills in soldering, EMC testing, and electrical assembly, we would love to hear from you. Apply now to embark on a fulfilling contract role within a highly dynamic and secure environment.

VEHICLE TECHNICIAN Basic Salary: £31,000 - £35,000 DOE OTE: £37,000 - £41,000 Hours: Monday - Friday 8.30am till 5pm & 1 in 3 Saturdays 8.30am till 12.30pm Location: Cheltenham Are you an enthusiastic, team player, hard working Vehicle Technician looking for a new opportunity or challenge within a Car Dealership? Benefits: Employee discount Life Assurance Birthday Off Brand Training and Development Referral programme Responsibilities of a Vehicle Technician Performing a variety of service operations Good technical skills Defined assembly operations and maintenance repairs with the highest level of quality and efficiency Ensure compliance with safety and manufacturer standards Accurately document service work Provide excellent customer support and advice Skills and Qualifications of a Vehicle Technician MUST HOLD an NVQ Level 3 in Vehicle Maintenance and Repair At least 2 years' experience as a Vehicle Technician within the automotive industry Valid MOT License not essential but desirable Hold your own tools and toolbox MUST HOLD Full manual UK Driving License (you will be subject to license checks) Right to work in the UK - no sponsorships available If you are interested in this Vehicle Technician vacancy, please contact Kelsey and quote job number 53123

Our client is a well-established and successful vehicle manufacturer, they are looking for an experienced Pre Delivery Inspector / Vehicle PDI Technician to join their team. This is a hands-on role where you ll ensure that every vehicle leaving the facility meets customer specifications and quality standards. PLEASE ONLY APPLY IF YOU MEET THE FOLLWING REQUIREMENTS: Strong mechanical knowledge of vehicles in general (ideally HGV / Truck / Plant Vehicles) Experience in vehicle inspection or specialist vehicle assembly will be favoured Understanding of hydraulic systems and quality assurance processes Mechanical qualifications, HGV licence, or tachograph training are a bonus Experience of working in a fast-paced production environment Salary: £15.91 - £18.26 per hour depending on experience + Overtime Hours: 6:45am 4:15pm, Monday to Thursday (37 hours a week) Key Responsibilities: Carry out in-process quality audits, including torque settings and hydraulic pressure checks Systematically test each vehicle in line with inspection procedures Confirm compliance with customer specifications before vehicles are passed to sales Record build standard criteria and faults systematically for analysis Promote constructive dialogue with manufacturing teams to implement quality standards Support continuous improvement through data collection and feedback This role would suit someone with previous experience as a Pre-Delivery Inspector, or a Quality Inspector with experience of checking over large / heavy vehicles. Previous job titles can include Mechanic / PDI Technician / Auto Electrician / QA Technician / QC Technician / Quality Assurance Controller / QA Controller / Quality Controller / Quality Auditor / Quality Inspector / Quality Manager / Quality Control Coordinator / Quality Officer / similar.

Responsibilities of the role: Conduct tests on propulsion systems using laboratory-based facilities, as outlined by project engineer or customer engineer. Monitor and record test data, ensuring it meets quality and performance standards. Raising any anomalies or issues observed to project engineers. Support the troubleshooting and resolving of issues in a methodical manner, introducing solutions to prevent reoccurrence. Assist in administrative tasks related to test scheduling, documentation, data management and hardware inventories to ensure seamless project delivery. Support project hardware and electrical preparation, assembly, disassembly and modification activities. Perform basic fabrication activities to meet project hardware mounting and fixture requirements. Support maintenance, cleaning and organising activities to ensure the facility remains safe, functional and efficient. Support continuous improvement initiatives to enhance test methodologies, operational efficiency and standardisation. Work collaboratively with cross-functional internal and client teams. Adherence to health and safety policies. Support risk assessment of safe working in the test environment and the actioning of risk items. Any other tasks deemed appropriate by manager.

Role: Gearbox Assembly Technician / Transmission Assembly Technician Location: Leamington Spa Duration: 6 months Pay Rate: 20.00 per hour PAYE Responsible for the preparation and build of gearboxes and axles for low volume, high value driveline systems for a variety of customers within Motorsports. Requirements: Previous experience of building gearboxes and good mechanical assembly skills.

Assembly Technician Apprentice Intake 2026 RSE is delighted to welcome applications for our Assembly Technician Apprentice Intake 2026 in Muir of Ord. This is an exciting opportunity for individuals to join one of the industry s leading Engineering businesses, who are truly innovative in their solutions to the Water industry. You ll receive best-in-class training whilst going through your education and then be given the opportunity to work on a variety of projects throughout the UK, providing technical expertise to our client s. There are no barriers to progression with RSE, so beyond your initial training and development, our wider business can offer you a truly rewarding career. Closing date for applications is 27th of April 2026, and we will be conducting the first series of interviews in May 2026. Following the interview process, placements will start in July 2026. What Do You Need? To be eligible for the Apprenticeship programme, you should: Have achieved National 4 Level Grade in Maths and/or Application of Maths, English and a Science (preferably Physics). Owing to insurance and legal requirement you must be 16 years of age when starting (July 2026). Who Are We? RSE is a trusted clean water technology company, developing market-leading products and solutions for purifying drinking water, recycling wastewater, and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. A flexible career development path, with no restrictions on where your career can go. Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now

5 Month Contract working in the Filling team. 4 on 4 off shift pattern days and nights. Based in Speke in Liverpool. Working under the Team Leader, the Process Technician is responsible for executing the manufacturing processes in the Aseptic Filling department in accordance with written procedures. The role holder will provide (be trained in) the technical skill sets necessary to manufacture high quality vaccines in a compliant, efficient and cost-effective manner. Responsibilities Carries out all sterile filling process operations using local SOPs and batch documentation whilst in full compliance with cGMP to meet production schedule demands. To work in a safe manner in compliance with all pertinent UK legislation, Seqirus mandatory policies, guidelines and site procedures for Health, Safety and Environment. When manufacturing ensure that all Departmental SOPs and MIs are followed and: Ensure appropriate control, monitoring and delivery of activities in their area of work. Ensure that all documentation is completed correctly, accurately in a timely manner and signed by the relevant personnel. Carry out final documentation review and sign off to ensure documentation is right first time. Ensure compliance to Health and Safety regulations. Consistently demonstrating the behaviours necessary to create a safe working environment for themselves and their colleagues. To actively maintain and promote a cGMP compliant culture, ensure that the highest standards of housekeeping and safety are applied within the area in accordance with the Orange Guide and CFR regulations and to apply the principles of Lean Manufacturing, Problem Solving, 5S ,Waste Elimination and Energy Efficient Activities in support of Continuous Improvement. To maximise their individual contribution so that team objectives are achieved. To work as a team member, providing and receiving feedback to team members and their team leader. To communicate and liaise with members of other teams in order to meet the business's objectives. When required, to flexibly support other departments - providing adequate training is received and it is safe to do so. Attend all compulsory and allocated training courses required for the role. Ensure that all training is completed in a timely manner and that personal training records are kept up to date. To continue to develop new skills, competencies and behaviours to fulfil both current and future business needs. The role holder will be able to demonstrate the application of the skills required for their role. To contribute ideas and action in order to improve team, process and equipment performance. To support process improvement and uphold Seqirus Values and Behaviours. Support organisation change and process improvements. Aseptic Filling - Specific Tasks Include: Movement of materials using pallet trucks (manual and electric) to ensure manufacturing operations are efficient and production demands are met. Cleaning and disinfection of production rooms and equipment to maintain cleanroom, cGMP and HSE standards. Cleaning, preparation, sterilisation, assembly and disassembly of production equipment Performance of In Process Control checks and Environmental Monitoring to ensure the isolator environment is maintained and products are made within specification. Operation of the Filling production line including use of machine interfaces, performing VHP/CIP/SIP cycles, monitoring the batch and performing interventions Knowledge, Skills & Competencies Filling of sterile products / Aseptically qualified (e.g. sterile connections, sterility assurance) / Use of Isolator technology. Attention to detail and high personal concern for standards, integrity, communication, and discretion. Proven knowledge of cGMP. Basic mechanical aptitude or knowledge of electronic/mechanical equipment Competent in using multiple computer systems e.g. PCS, GLIMS, SAP and production line machine interfaces Education Requirements Relevant degree qualification preferred Experience Requirements 1+ years' experience and competence in cGMP and sterile product production operations in the Biotech or Pharma industry preferred Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser (url removed)

A Lead Test Engineer with a proven background in an Electronic Manufacturing environment will bring their commitment to quality and service, their ability to inspire a team and their hands-on skills to an award-winning Technology company offering a competitive salary package and career stability. The successful Lead Electronic Test Engineer will play a key role in ensuring the efficient production of a range of mission critical electronic and mechanical devices; undertaking troubleshooting and resolving issues, maintaining detailed documentation - adhering to quality and safety standards. The ideal Lead Electronic Test Engineer will bring: A formal Electronic Engineering qualification (HNC, HND, Degree or equivalent). Hands-on fault finding skills, SMT soldering skills and experience of working with a range of test equipment. Knowledge of electronic assembly techniques and a good understanding of manufacturing processes. Ability to read schematics. Familiarity with EMC standards. Experience of leading a small team of technicians. Strong communication skills. This role offers a competitive salary package with a discretionary bonus, Pension Scheme, Life Assurance, variable start/finish times, free snacks and more.

VEHICLE TECHNICIAN Salary: £32,000 depending on experience + OTE: £38,000 Location: Bedford Hours: Monday to Friday 8:30am to 5:00pm One in Three Saturdays 8:30am to 12:30pm Are you an enthusiastic, team player, hard working Vehicle Technician looking for a new opportunity or challenge within a Car Dealership? Benefits: 32 Days Annual Leave Including Bank Holidays Health Plan On site parking Continuous Training & Development Discounts on Parts & Servicing Responsibilities of a Vehicle Technician Work in ranges from servicing a vehicle to general vehicle repair. Good technical skills & ability to complete diagnostics. Defined assembly operations and maintenance repairs with the highest level of quality and efficiency Ensure compliance with safety and manufacturer standards Accurately document service work Skills and Qualifications of a Vehicle Technician MUST HOLD an NVQ Level 2/3 in Vehicle Maintenance and Repair Previous 3 Years Vehicle Technician experience within the automotive industry Valid MOT Licence not essential but desirable Hold your own tools and toolbox Full manual UK Driving Licence If you are interested in this Vehicle Technician role, please contact Skills and quote job number: 53458