Experienced Senior Systems Engineer to be responsible for the delivery of an alternative fuel ICE, as well as taking a multitude of new conventional engine system components from concept to flawless launch, ensuring a robust system/component sign-off meeting all regulatory, quality, cost and timing requirements. The post will suit an individual looking for an opportunity to develop their career within a fast-paced organisation at the cutting edge of engine design and development. Senior Systems Engineer Role: Working within a dynamic engineering-focused team, you will be responsible for the end-to-end engineering activities (research, development, delivery, and launch) relating to engine systems. You'll need to support in-house quality, manufacturing, and service teams in resolving complex technical issues resulting from warranty claims and/or issues that lead to engineering change as the permanent solution, creating all-in-all robust product of world class quality. Senior Systems Engineer Responsibilities: Planning and Organisation: Maintaining and delivering the project plan for your system based on cascaded targets and allocated resource. Coordinate and liaise with key stakeholders (e.g. programme, purchasing, supplier) for seamless project delivery. Support programme gateway reviews with technical evidence and cost status. Provide effective and timely escalation/status report through clear communication to management. Provide support to other design workstreams throughout the global design team. Research and Development: Keep on track of the state-of-the-art technical development within the System for which you are responsible. Understand the effectiveness and importance of relevant benchmarking. Create clean sheet concept designs from first principles. Plan and execute Proof-of-Concept assessment either through test campaign and/or first principle analysis and simulation. Design and Release: Work in a simultaneous engineering environment to support product development, ensuring design for service and achieving quality by design. Elicit requirements for your system based on cascaded performance and cost targets. Create system and component specifications and designs based on agreed requirements with key stakeholders. Commission relevant analysis tools to support data driven design decisions or undertake and develop in house analysis. Develop system and component FMEAs, and DVPs. Coordinate and supervise DVP activities (e.g. analytical, simulation, and rig/engine/machine testing). Resolve engineering issues using structured problem-solving methodologies (e.g. Global 8D, DMAIC). Engage and support suppliers via the APQP process; deliver prototypes and PPAP parts to schedule, and fulfil quality and performance requirements. Support achievement of business s quality and warranty targets. Support current product through continuous improvement of components and system specification. Senior Systems Engineer Requirements: Have a degree in an associated mechanical engineering discipline, with a sound understanding of Mechanical Engineering principles (showing an attention to detail, and being data driven). Have a sound grasp of the engine product development cycle, and expertise in engine system and component specification, design, development and sign-off (using relevant tools). 5+ years previous experience of full system design for diesel or gasoline engines is essential. Practical understanding of ICE operating principles (e.g. mechanical/electromechanical design, thermodynamics, and tribology). Demonstratable experience in use of commercially available 2D drawing and 3D Modelling packages with knowledge of mechanical engineering GD&T and manufacturing processes. Understanding of the role of emissions performance relating to ICE. Knowledge and experience in Model-Based-System-Engineering is preferred. Previous experience of 1D simulation (in AMEsim or similar) is advantageous, but not required. Experienced supplier interactions and management, with good commercial awareness. Understand and contribute to the management of the project. Be able to work well under pressure and to meet deadlines. Demonstrate an ability to communicate clearly and concisely at all levels. Show flexibility - the role requires travel to customer and supplier sites. Be willing to contribute in a dynamic, collaborative, and cross-discipline team setting. Benefits: In addition to an excellent salary, career progression and development opportunities, our client offers an excellent company pension scheme, medical insurance and dental care schemes, access to the company s healthy living centre and 33 days annual leave and flexibility around daily start and finish times. You will also have access to the Company s Reward Hub, giving you fantastic savings across a huge range of high street retailers, as well as access to exclusive company perks such as the Cycle to Work Scheme. Applications: VISA Sponsorship is NOT available for this role This vacancy is only available to Candidates with relevant experience as detailed in the job description. Due to volume of applications, we are unable to respond to applicants who do not possess the required skills and experience. Recent Graduates who do not have the required level of industry experience need not apply. Candidates must be authorised to work in the country where this role is located BEFORE making an application.
Apr 04, 2026
Full time
Experienced Senior Systems Engineer to be responsible for the delivery of an alternative fuel ICE, as well as taking a multitude of new conventional engine system components from concept to flawless launch, ensuring a robust system/component sign-off meeting all regulatory, quality, cost and timing requirements. The post will suit an individual looking for an opportunity to develop their career within a fast-paced organisation at the cutting edge of engine design and development. Senior Systems Engineer Role: Working within a dynamic engineering-focused team, you will be responsible for the end-to-end engineering activities (research, development, delivery, and launch) relating to engine systems. You'll need to support in-house quality, manufacturing, and service teams in resolving complex technical issues resulting from warranty claims and/or issues that lead to engineering change as the permanent solution, creating all-in-all robust product of world class quality. Senior Systems Engineer Responsibilities: Planning and Organisation: Maintaining and delivering the project plan for your system based on cascaded targets and allocated resource. Coordinate and liaise with key stakeholders (e.g. programme, purchasing, supplier) for seamless project delivery. Support programme gateway reviews with technical evidence and cost status. Provide effective and timely escalation/status report through clear communication to management. Provide support to other design workstreams throughout the global design team. Research and Development: Keep on track of the state-of-the-art technical development within the System for which you are responsible. Understand the effectiveness and importance of relevant benchmarking. Create clean sheet concept designs from first principles. Plan and execute Proof-of-Concept assessment either through test campaign and/or first principle analysis and simulation. Design and Release: Work in a simultaneous engineering environment to support product development, ensuring design for service and achieving quality by design. Elicit requirements for your system based on cascaded performance and cost targets. Create system and component specifications and designs based on agreed requirements with key stakeholders. Commission relevant analysis tools to support data driven design decisions or undertake and develop in house analysis. Develop system and component FMEAs, and DVPs. Coordinate and supervise DVP activities (e.g. analytical, simulation, and rig/engine/machine testing). Resolve engineering issues using structured problem-solving methodologies (e.g. Global 8D, DMAIC). Engage and support suppliers via the APQP process; deliver prototypes and PPAP parts to schedule, and fulfil quality and performance requirements. Support achievement of business s quality and warranty targets. Support current product through continuous improvement of components and system specification. Senior Systems Engineer Requirements: Have a degree in an associated mechanical engineering discipline, with a sound understanding of Mechanical Engineering principles (showing an attention to detail, and being data driven). Have a sound grasp of the engine product development cycle, and expertise in engine system and component specification, design, development and sign-off (using relevant tools). 5+ years previous experience of full system design for diesel or gasoline engines is essential. Practical understanding of ICE operating principles (e.g. mechanical/electromechanical design, thermodynamics, and tribology). Demonstratable experience in use of commercially available 2D drawing and 3D Modelling packages with knowledge of mechanical engineering GD&T and manufacturing processes. Understanding of the role of emissions performance relating to ICE. Knowledge and experience in Model-Based-System-Engineering is preferred. Previous experience of 1D simulation (in AMEsim or similar) is advantageous, but not required. Experienced supplier interactions and management, with good commercial awareness. Understand and contribute to the management of the project. Be able to work well under pressure and to meet deadlines. Demonstrate an ability to communicate clearly and concisely at all levels. Show flexibility - the role requires travel to customer and supplier sites. Be willing to contribute in a dynamic, collaborative, and cross-discipline team setting. Benefits: In addition to an excellent salary, career progression and development opportunities, our client offers an excellent company pension scheme, medical insurance and dental care schemes, access to the company s healthy living centre and 33 days annual leave and flexibility around daily start and finish times. You will also have access to the Company s Reward Hub, giving you fantastic savings across a huge range of high street retailers, as well as access to exclusive company perks such as the Cycle to Work Scheme. Applications: VISA Sponsorship is NOT available for this role This vacancy is only available to Candidates with relevant experience as detailed in the job description. Due to volume of applications, we are unable to respond to applicants who do not possess the required skills and experience. Recent Graduates who do not have the required level of industry experience need not apply. Candidates must be authorised to work in the country where this role is located BEFORE making an application.
About Pulsant Pulsant is a leading UK digital infrastructure provider, offering innovative edge infrastructure solutions through our PlatformEdge. With 14 strategically located data centres and a dedicated team of over 300 professionals (with an average tenure of 7 years), we support 1000+ clients services across the UK with cloud, connectivity, and compute services. About the role: With the UK s most geographically dispersed network of data centres, Pulsant is poised to capture the strong growth that will be driven by distribution of workloads closer to the Edge. Alongside expansion driven by M&A, Pulsant is investing heavily into the expansion and improvement of our portfolio to underpin this growth. The Director of Data Centre Build and Engineering is a newly created strategically critical senior management role with end-to-end accountability for the engineering integrity, build delivery, and technical governance of Pulsant s data centre portfolio. The role leads Pulsant s Mechanical and Electrical engineering capability and oversees all major build, expansion, and infrastructure upgrade programmes across the estate. It ensures that capital investment delivers operationally robust, maintainable, and compliant assets, aligned to Pulsant s technical standards and long-term strategy. This role acts as the final internal technical authority for data centre build and engineering decisions and provides leadership to three regional M&E engineering teams responsible for the safe operation, modification, and development of the data centres power and cooling systems. We are flexible on base location for this role, it can be based from any of our offices (Gateshead, Edinburgh or Maidenhead) or any of our 14 data centres which are spread across the UK, on a hybrid basis and with national travel. Key responsibilities: Act as Pulsant s senior engineering authority for data centre infrastructure, owning engineering outcomes across the full asset lifecycle. Lead the Mechanical and Electrical engineering function nationally, setting strategy, standards, and providing assurance across all regions. Define, own, and enforce engineering design standards, reference architectures, resilience principles, and build methodologies. Provide end-to-end oversight of all major data centre build, expansion, and refurbishment programmes, from concept through operational handover. Own the capital investment roadmap for engineering and builds, ensuring prioritisation, governance, risk management, and alignment to business objectives. Lead build, commissioning, and operational readiness strategies, including integrated system testing, live-site integration, and safe handover to operations. Establish and operate robust engineering governance, risk, and compliance frameworks, including health and safety, fire, resilience, and audit requirements. Act as the single point of technical accountability across data centre operations, CTO. Work with stakeholders in Commercial, Product and Technology to support Pulsant s growth ambitions. What / who we're looking for: Significant experience leading Mechanical and Electrical engineering functions and capital programmes in critical infrastructure environments, ideally data centres. Proven delivery of complex build, expansion, or modernisation programmes in live operational environments. Experience managing consultants, contractors, and specialist vendors. Strong background in engineering governance, technical assurance, and risk management. Demonstrated ability to align engineering outcomes with commercial and operational priorities. Strong leadership and influencing skills Full UK Driving Licence. Pulsant offers: A supportive work environment with a focus on career growth, development, work life balance and well-being. A friendly, family-like atmosphere where almost half of the team have been with Pulsant for 5+ years. Benefits include 5% pension, private healthcare, cycle to work scheme, free breakfast and snacks, Udemy licence and more. Equal opportunity employer statement: At Pulsant, we are committed to creating a supportive and inclusive environment where everyone feels valued and has a strong sense of belonging. We want all individuals to feel respected, heard, and empowered to contribute and succeed. If there is any way we can support you such as providing reasonable accommodations during the application or interview process please note this in your application, or reach out to us by email:
Apr 04, 2026
Full time
About Pulsant Pulsant is a leading UK digital infrastructure provider, offering innovative edge infrastructure solutions through our PlatformEdge. With 14 strategically located data centres and a dedicated team of over 300 professionals (with an average tenure of 7 years), we support 1000+ clients services across the UK with cloud, connectivity, and compute services. About the role: With the UK s most geographically dispersed network of data centres, Pulsant is poised to capture the strong growth that will be driven by distribution of workloads closer to the Edge. Alongside expansion driven by M&A, Pulsant is investing heavily into the expansion and improvement of our portfolio to underpin this growth. The Director of Data Centre Build and Engineering is a newly created strategically critical senior management role with end-to-end accountability for the engineering integrity, build delivery, and technical governance of Pulsant s data centre portfolio. The role leads Pulsant s Mechanical and Electrical engineering capability and oversees all major build, expansion, and infrastructure upgrade programmes across the estate. It ensures that capital investment delivers operationally robust, maintainable, and compliant assets, aligned to Pulsant s technical standards and long-term strategy. This role acts as the final internal technical authority for data centre build and engineering decisions and provides leadership to three regional M&E engineering teams responsible for the safe operation, modification, and development of the data centres power and cooling systems. We are flexible on base location for this role, it can be based from any of our offices (Gateshead, Edinburgh or Maidenhead) or any of our 14 data centres which are spread across the UK, on a hybrid basis and with national travel. Key responsibilities: Act as Pulsant s senior engineering authority for data centre infrastructure, owning engineering outcomes across the full asset lifecycle. Lead the Mechanical and Electrical engineering function nationally, setting strategy, standards, and providing assurance across all regions. Define, own, and enforce engineering design standards, reference architectures, resilience principles, and build methodologies. Provide end-to-end oversight of all major data centre build, expansion, and refurbishment programmes, from concept through operational handover. Own the capital investment roadmap for engineering and builds, ensuring prioritisation, governance, risk management, and alignment to business objectives. Lead build, commissioning, and operational readiness strategies, including integrated system testing, live-site integration, and safe handover to operations. Establish and operate robust engineering governance, risk, and compliance frameworks, including health and safety, fire, resilience, and audit requirements. Act as the single point of technical accountability across data centre operations, CTO. Work with stakeholders in Commercial, Product and Technology to support Pulsant s growth ambitions. What / who we're looking for: Significant experience leading Mechanical and Electrical engineering functions and capital programmes in critical infrastructure environments, ideally data centres. Proven delivery of complex build, expansion, or modernisation programmes in live operational environments. Experience managing consultants, contractors, and specialist vendors. Strong background in engineering governance, technical assurance, and risk management. Demonstrated ability to align engineering outcomes with commercial and operational priorities. Strong leadership and influencing skills Full UK Driving Licence. Pulsant offers: A supportive work environment with a focus on career growth, development, work life balance and well-being. A friendly, family-like atmosphere where almost half of the team have been with Pulsant for 5+ years. Benefits include 5% pension, private healthcare, cycle to work scheme, free breakfast and snacks, Udemy licence and more. Equal opportunity employer statement: At Pulsant, we are committed to creating a supportive and inclusive environment where everyone feels valued and has a strong sense of belonging. We want all individuals to feel respected, heard, and empowered to contribute and succeed. If there is any way we can support you such as providing reasonable accommodations during the application or interview process please note this in your application, or reach out to us by email:
A Senior Product Systems Engineer with extensive experience in RF or High Speed Digital Electronics and a background of complex system design within a Defence or Electronic Product Development environment, will join a thriving Technology Company, Global leaders in Satellite Communications infrastructure. Working across multiple technical disciplines including hardware, software and mechanical; the successful Senior Product Systems Engineer will act as technical authority, leading the system integration and validation activities for complex products. Bringing a strong academic background in an Electronic Engineering related discipline and extensive commercial experience gained within a Defence or similar Engineering environment, you will balance innovation with structured processes to deliver top quality solutions. Applicants should bring the following: Expertise in Electronics systems incorporating RF and High Speed Digital Systems. Bachelors /Masters Engineering Degree in discipline related to RF Product Design. Extensive System level experience. Familiarity with Satellite Communications technology. Experience of collaborating across multidisciplinary teams including digital electronics, software and mechanical. A generous salary package will be offered to the Senior Product Systems Engineer. (Details on application) Hybrid working available (2 days minimum office / 3 WFH).
Apr 04, 2026
Full time
A Senior Product Systems Engineer with extensive experience in RF or High Speed Digital Electronics and a background of complex system design within a Defence or Electronic Product Development environment, will join a thriving Technology Company, Global leaders in Satellite Communications infrastructure. Working across multiple technical disciplines including hardware, software and mechanical; the successful Senior Product Systems Engineer will act as technical authority, leading the system integration and validation activities for complex products. Bringing a strong academic background in an Electronic Engineering related discipline and extensive commercial experience gained within a Defence or similar Engineering environment, you will balance innovation with structured processes to deliver top quality solutions. Applicants should bring the following: Expertise in Electronics systems incorporating RF and High Speed Digital Systems. Bachelors /Masters Engineering Degree in discipline related to RF Product Design. Extensive System level experience. Familiarity with Satellite Communications technology. Experience of collaborating across multidisciplinary teams including digital electronics, software and mechanical. A generous salary package will be offered to the Senior Product Systems Engineer. (Details on application) Hybrid working available (2 days minimum office / 3 WFH).
Job Title: Senior Firmware Engineer (Hardware Bias) Location: Northwest Salary: Up to £60k (depending on experience) We re seeking a Senior Firmware Engineer to join a multidisciplinary R&D team developing advanced electromechanical products for regulated environments. You will play a key role in the design, development, and validation of embedded firmware for next-generation products while also improving existing systems. The role involves close collaboration with software, electronics, mechanical, and quality teams and requires strong problem-solving skills and a hands-on approach to engineering challenges. Key Responsibilities Design and develop embedded firmware in C/C++ for microcontroller-based systems. Architect software for complex electromechanical products operating in regulated environments. Develop both embedded and desktop software solutions. Investigate and enhance existing firmware including motor control, battery management, and user interface functionality. Develop software test systems and validation protocols. Support internal testing and external certification processes where required. Utilise lab equipment such as oscilloscopes, environmental test systems, and test rigs. Work closely with cross-functional engineering teams. Contribute to engineering documentation and change management processes. About You Degree in Electronics, Software Engineering, Computer Science, or a related discipline. 5+ years experience in embedded firmware or electronics development. Strong experience with C/C++ embedded firmware development. Experience with bare-metal or RTOS-based microcontroller systems. Knowledge of networking or cloud-connected devices. Familiarity with engineering tools for design, simulation, testing, and measurement. Experience developing products within regulated or safety-critical environments (IEC 62304 / IEC 60601). Please note we cannot offer sponsorship for the role. If interested, please send over an updated CV.
Apr 03, 2026
Full time
Job Title: Senior Firmware Engineer (Hardware Bias) Location: Northwest Salary: Up to £60k (depending on experience) We re seeking a Senior Firmware Engineer to join a multidisciplinary R&D team developing advanced electromechanical products for regulated environments. You will play a key role in the design, development, and validation of embedded firmware for next-generation products while also improving existing systems. The role involves close collaboration with software, electronics, mechanical, and quality teams and requires strong problem-solving skills and a hands-on approach to engineering challenges. Key Responsibilities Design and develop embedded firmware in C/C++ for microcontroller-based systems. Architect software for complex electromechanical products operating in regulated environments. Develop both embedded and desktop software solutions. Investigate and enhance existing firmware including motor control, battery management, and user interface functionality. Develop software test systems and validation protocols. Support internal testing and external certification processes where required. Utilise lab equipment such as oscilloscopes, environmental test systems, and test rigs. Work closely with cross-functional engineering teams. Contribute to engineering documentation and change management processes. About You Degree in Electronics, Software Engineering, Computer Science, or a related discipline. 5+ years experience in embedded firmware or electronics development. Strong experience with C/C++ embedded firmware development. Experience with bare-metal or RTOS-based microcontroller systems. Knowledge of networking or cloud-connected devices. Familiarity with engineering tools for design, simulation, testing, and measurement. Experience developing products within regulated or safety-critical environments (IEC 62304 / IEC 60601). Please note we cannot offer sponsorship for the role. If interested, please send over an updated CV.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Job Location: Barrow-in-Furness, Onsite This position requires full-time on-site presence. Please speak to your recruiter for further details. Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with engineering teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core Duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems suitable for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, while keeping up to date with emerging technologies and industry developments Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing guidance on technical matters and professional development Apply engineering expertise supported by a degree in Mechanical Engineering, Engineering, or a relevant Science discipline, with the ability to perform complex calculations, develop technical documentation, and utilise CAD and standard IT tools The Mechanical Platform Systems Team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive. We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 03, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Job Location: Barrow-in-Furness, Onsite This position requires full-time on-site presence. Please speak to your recruiter for further details. Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with engineering teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core Duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems suitable for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, while keeping up to date with emerging technologies and industry developments Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing guidance on technical matters and professional development Apply engineering expertise supported by a degree in Mechanical Engineering, Engineering, or a relevant Science discipline, with the ability to perform complex calculations, develop technical documentation, and utilise CAD and standard IT tools The Mechanical Platform Systems Team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive. We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Senior Mechanical Engineer - Fluidic Systems Newton Colmore is working with a leading technology innovator in Cambridge, and we are looking for a senior mechanical engineer who understands fluidics, thermodynamics and heat transfer. This exciting new role will give the Mechanical Engineer an excellent opportunity to work on novel products that span multiple industrial applications. You will hold responsibility for the design and development of new ideas, from initial concept through to manufacture. You will be evaluating new ideas using evidence from modelling or experimentally obtained evidence and will be working on system and component-level elements. You will then test and verify your ideas and work closely with the manufacturing team to ensure manufacturability throughout every step of the design process. You will be brining with you a passion for mechanical engineering and solving problems, coupled with strong academics. A detailed understanding of using maths and physics within the fields of fluidics and thermodynamics is vitally important for this position. The company are offering tailored packages for the right engineer, which includes a performance bonus, free lunches, and market leading pension plan. They can also offer you career progression and foster an environment that encourages collaboration, learning and self-development. If you would like to find out more about this opportunity than go ahead and make an application and a member of our team will be in touch to talk through the role further. This role is being managed by Matt Lowdon who is one of the directors at Newton Colmore. Newton Colmore is a specialist recruitment and growth consultancy dedicated to the medical devices and biotechnology sectors.
Apr 03, 2026
Full time
Senior Mechanical Engineer - Fluidic Systems Newton Colmore is working with a leading technology innovator in Cambridge, and we are looking for a senior mechanical engineer who understands fluidics, thermodynamics and heat transfer. This exciting new role will give the Mechanical Engineer an excellent opportunity to work on novel products that span multiple industrial applications. You will hold responsibility for the design and development of new ideas, from initial concept through to manufacture. You will be evaluating new ideas using evidence from modelling or experimentally obtained evidence and will be working on system and component-level elements. You will then test and verify your ideas and work closely with the manufacturing team to ensure manufacturability throughout every step of the design process. You will be brining with you a passion for mechanical engineering and solving problems, coupled with strong academics. A detailed understanding of using maths and physics within the fields of fluidics and thermodynamics is vitally important for this position. The company are offering tailored packages for the right engineer, which includes a performance bonus, free lunches, and market leading pension plan. They can also offer you career progression and foster an environment that encourages collaboration, learning and self-development. If you would like to find out more about this opportunity than go ahead and make an application and a member of our team will be in touch to talk through the role further. This role is being managed by Matt Lowdon who is one of the directors at Newton Colmore. Newton Colmore is a specialist recruitment and growth consultancy dedicated to the medical devices and biotechnology sectors.
A specialist independent building services consultancy has, due to planned expansion, an immediate requirement for a high-end intermediate / senior level building services design engineer to join their design team in their Birmingham offices. hybrid remote working available. They work in a wide variety of project sectors including, general commercial, high-end residential, educational, health and MOD. As a mechanical design engineer you would be expected to provide effective designs, conduct surveys, prepare feasibility reports, specifications, provide site supervision and management of mechanical services installations. You should ideally be qualified to a minimum of HND level and have a minimum of 2 years' UK building services design experience. You should have a demonstrable UK building services background. Your responsibilities would include: Design calculations using industry leading software Assisting in preparing reports such as feasibility studies, design reports, specifications and contract administration. Maintaining an up to date knowledge of current standards and legislation. Attending site surveys and client meetings. Implementing technical standards and supporting the business development. Compliance with CDM Regulations must be ensured. Undertaking detailed site surveys and design reviews. Understanding of engineering systems and the ability to report on both mechanical and electrical disciplines during meetings is essential. You would need an appreciation of contract administration, project management and site supervision/inspections and assist with the financial control of project(s) liaising with Project Director. Mentoring and assisting the graduate engineers. Skills and Experience Prefarbly have some Revit MEP experience. Some experience of IES modelling software would be advantageous (but not essential). Ideally some understanding of BIM Level 2 and BIM project deliverables structure. Training will be provided if required Undertaking mechanical designs from inception to completion, sometimes within tight deadlines whilst maintaining accuracy and quality. CEng qualified or working towards CEng. Appropriate membership of professional body, i.e. CIBSE, IMECHE, IET Full UK driving license
Apr 03, 2026
Full time
A specialist independent building services consultancy has, due to planned expansion, an immediate requirement for a high-end intermediate / senior level building services design engineer to join their design team in their Birmingham offices. hybrid remote working available. They work in a wide variety of project sectors including, general commercial, high-end residential, educational, health and MOD. As a mechanical design engineer you would be expected to provide effective designs, conduct surveys, prepare feasibility reports, specifications, provide site supervision and management of mechanical services installations. You should ideally be qualified to a minimum of HND level and have a minimum of 2 years' UK building services design experience. You should have a demonstrable UK building services background. Your responsibilities would include: Design calculations using industry leading software Assisting in preparing reports such as feasibility studies, design reports, specifications and contract administration. Maintaining an up to date knowledge of current standards and legislation. Attending site surveys and client meetings. Implementing technical standards and supporting the business development. Compliance with CDM Regulations must be ensured. Undertaking detailed site surveys and design reviews. Understanding of engineering systems and the ability to report on both mechanical and electrical disciplines during meetings is essential. You would need an appreciation of contract administration, project management and site supervision/inspections and assist with the financial control of project(s) liaising with Project Director. Mentoring and assisting the graduate engineers. Skills and Experience Prefarbly have some Revit MEP experience. Some experience of IES modelling software would be advantageous (but not essential). Ideally some understanding of BIM Level 2 and BIM project deliverables structure. Training will be provided if required Undertaking mechanical designs from inception to completion, sometimes within tight deadlines whilst maintaining accuracy and quality. CEng qualified or working towards CEng. Appropriate membership of professional body, i.e. CIBSE, IMECHE, IET Full UK driving license
Job Title: Senior/Principal Platform Systems Mechanical Engineer Job Location: Barrow-in-Furness, Onsite This position requires full-time on-site presence. Please speak to your recruiter for further details. Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with engineering teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core Duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems suitable for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, while keeping up to date with emerging technologies and industry developments Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing guidance on technical matters and professional development Apply engineering expertise supported by a degree in Mechanical Engineering, Engineering, or a relevant Science discipline, with the ability to perform complex calculations, develop technical documentation, and utilise CAD and standard IT tools The Mechanical Platform Systems Team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive. We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 03, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Job Location: Barrow-in-Furness, Onsite This position requires full-time on-site presence. Please speak to your recruiter for further details. Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with engineering teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core Duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems suitable for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, while keeping up to date with emerging technologies and industry developments Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing guidance on technical matters and professional development Apply engineering expertise supported by a degree in Mechanical Engineering, Engineering, or a relevant Science discipline, with the ability to perform complex calculations, develop technical documentation, and utilise CAD and standard IT tools The Mechanical Platform Systems Team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive. We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Job Location: Barrow-in-Furness, Onsite This position requires full-time on-site presence. Please speak to your recruiter for further details. Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with engineering teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core Duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems suitable for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, while keeping up to date with emerging technologies and industry developments Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing guidance on technical matters and professional development Apply engineering expertise supported by a degree in Mechanical Engineering, Engineering, or a relevant Science discipline, with the ability to perform complex calculations, develop technical documentation, and utilise CAD and standard IT tools The Mechanical Platform Systems Team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive. We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 03, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Job Location: Barrow-in-Furness, Onsite This position requires full-time on-site presence. Please speak to your recruiter for further details. Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with engineering teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core Duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems suitable for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, while keeping up to date with emerging technologies and industry developments Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing guidance on technical matters and professional development Apply engineering expertise supported by a degree in Mechanical Engineering, Engineering, or a relevant Science discipline, with the ability to perform complex calculations, develop technical documentation, and utilise CAD and standard IT tools The Mechanical Platform Systems Team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive. We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Training and Development: Excellent career progression, training and career development opportunities The opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Apr 03, 2026
Full time
Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Training and Development: Excellent career progression, training and career development opportunities The opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Murray McIntosh is a specialist recruitment consultancy with a strong industry reputation built on quality, integrity and long term partnerships. We work with high profile clients across policy, engineering and the Water sector, taking a consultative, insight led approach to recruitment in complex, regulated and technical markets. Senior consultants at Murray McIntosh play a key role in shaping client partnerships, growing specialist markets and contributing to the long term success of the business. We are recruiting Senior Recruitment Consultants across several teams. This role suits an experienced recruiter who enjoys owning client relationships, developing markets and acting as a role model within a collaborative team. What you will be doing Leading recruitment delivery within your specialist area Developing and expanding key client accounts Winning new business through reputation, insight and trusted relationships Mentoring junior consultants and contributing to team development Advising clients on workforce planning and market trends Driving desk performance while maintaining quality and credibility About you Proven recruitment experience with a strong billing track record Confident managing senior stakeholders and complex searches Comfortable operating autonomously while contributing to a team environment Ambitious and interested in long term progression Values quality, reputation and specialist knowledge Murray McIntosh is committed to building an inclusive and supportive workplace. We welcome applications from all backgrounds and are happy to discuss any adjustments needed to support you through the recruitment process. Our specialist teams Policy & Public Affairs Working within industry, regulators, trade associations, charities and consultancies, we support our clients to recruit niche talent in policy, public affairs, communications and economics. Engineering Recruiting across disciplines from mechanical and electrical through to design and systems engineering. We work with defence, aerospace, manufacturing, science and research industries, supporting permanent and contract hiring at all levels. Water Partnering with water companies, consultancies and framework partners across clean and wastewater, infrastructure, environmental and capital programmes, with a strong contractor focus and long term client relationships. Benefits We offer clear career progression, accredited training and ongoing coaching, alongside excellent uncapped commission. Benefits also include private health insurance, a generous annual leave allowance, regular team socials including summer and Christmas parties. Our culture supports balance and wellbeing, with work from home Fridays and a collaborative, grown up working environment.
Apr 03, 2026
Full time
Murray McIntosh is a specialist recruitment consultancy with a strong industry reputation built on quality, integrity and long term partnerships. We work with high profile clients across policy, engineering and the Water sector, taking a consultative, insight led approach to recruitment in complex, regulated and technical markets. Senior consultants at Murray McIntosh play a key role in shaping client partnerships, growing specialist markets and contributing to the long term success of the business. We are recruiting Senior Recruitment Consultants across several teams. This role suits an experienced recruiter who enjoys owning client relationships, developing markets and acting as a role model within a collaborative team. What you will be doing Leading recruitment delivery within your specialist area Developing and expanding key client accounts Winning new business through reputation, insight and trusted relationships Mentoring junior consultants and contributing to team development Advising clients on workforce planning and market trends Driving desk performance while maintaining quality and credibility About you Proven recruitment experience with a strong billing track record Confident managing senior stakeholders and complex searches Comfortable operating autonomously while contributing to a team environment Ambitious and interested in long term progression Values quality, reputation and specialist knowledge Murray McIntosh is committed to building an inclusive and supportive workplace. We welcome applications from all backgrounds and are happy to discuss any adjustments needed to support you through the recruitment process. Our specialist teams Policy & Public Affairs Working within industry, regulators, trade associations, charities and consultancies, we support our clients to recruit niche talent in policy, public affairs, communications and economics. Engineering Recruiting across disciplines from mechanical and electrical through to design and systems engineering. We work with defence, aerospace, manufacturing, science and research industries, supporting permanent and contract hiring at all levels. Water Partnering with water companies, consultancies and framework partners across clean and wastewater, infrastructure, environmental and capital programmes, with a strong contractor focus and long term client relationships. Benefits We offer clear career progression, accredited training and ongoing coaching, alongside excellent uncapped commission. Benefits also include private health insurance, a generous annual leave allowance, regular team socials including summer and Christmas parties. Our culture supports balance and wellbeing, with work from home Fridays and a collaborative, grown up working environment.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Job Location: Barrow-in-Furness, Onsite This position requires full-time on-site presence. Please speak to your recruiter for further details. Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with engineering teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core Duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems suitable for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, while keeping up to date with emerging technologies and industry developments Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing guidance on technical matters and professional development Apply engineering expertise supported by a degree in Mechanical Engineering, Engineering, or a relevant Science discipline, with the ability to perform complex calculations, develop technical documentation, and utilise CAD and standard IT tools The Mechanical Platform Systems Team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive. We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 03, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Job Location: Barrow-in-Furness, Onsite This position requires full-time on-site presence. Please speak to your recruiter for further details. Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with engineering teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core Duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems suitable for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, while keeping up to date with emerging technologies and industry developments Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing guidance on technical matters and professional development Apply engineering expertise supported by a degree in Mechanical Engineering, Engineering, or a relevant Science discipline, with the ability to perform complex calculations, develop technical documentation, and utilise CAD and standard IT tools The Mechanical Platform Systems Team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive. We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
A Senior PCB Hardware Engineer will use their expertise to shape the direction of PCB design within a thriving Technical Consultancy. You'll bring an innovative approach to help hardware and mechanical engineers resolve challenging design tasks. Hybrid working and generous salary package. As a key member of a talented multidisciplinary team the Senior PCB Hardware Engineer will take responsibility for generating manufacturable designs from schematics; working closely with suppliers and build contractors as well as being highly involved in the collaborative design process. This role is more than PCB design. The Senior PCB Hardware Engineer role should bring: HNC/HND/Degree in Electronic / Electrical Engineering. Proven commercial experience of PCB Design and Layout ideally using Altium. Surface Mount Technology, DFM, DFA. Knowledge of IPC standards for high reliability products. Background in electronic hardware design and product development. Experience of working closely with PCB build contractors and manufacturers. A competitive salary will be offered, with Hybrid working ( normally 3 days office / 2 WFH), Company Bonus, 25 days holiday (+ option to purchase 5 more), Private Healthcare, Pension (employee 5% minimum / Employer 10%), Life Assurance (6x salary), Permanent Health Insurance, Long Service awards, cycle to work scheme, Car Lease scheme, free refreshments and more.
Apr 03, 2026
Full time
A Senior PCB Hardware Engineer will use their expertise to shape the direction of PCB design within a thriving Technical Consultancy. You'll bring an innovative approach to help hardware and mechanical engineers resolve challenging design tasks. Hybrid working and generous salary package. As a key member of a talented multidisciplinary team the Senior PCB Hardware Engineer will take responsibility for generating manufacturable designs from schematics; working closely with suppliers and build contractors as well as being highly involved in the collaborative design process. This role is more than PCB design. The Senior PCB Hardware Engineer role should bring: HNC/HND/Degree in Electronic / Electrical Engineering. Proven commercial experience of PCB Design and Layout ideally using Altium. Surface Mount Technology, DFM, DFA. Knowledge of IPC standards for high reliability products. Background in electronic hardware design and product development. Experience of working closely with PCB build contractors and manufacturers. A competitive salary will be offered, with Hybrid working ( normally 3 days office / 2 WFH), Company Bonus, 25 days holiday (+ option to purchase 5 more), Private Healthcare, Pension (employee 5% minimum / Employer 10%), Life Assurance (6x salary), Permanent Health Insurance, Long Service awards, cycle to work scheme, Car Lease scheme, free refreshments and more.
Cooling Development Engineer (Contract) The client is seeking a Cooling Development Engineer to join their vehicle engineering team on a contract basis, supporting the design and validation of cooling systems for both battery electric vehicles (BEV) and diesel powertrains. This is an excellent opportunity to gain hands-on experience working with PTC Creo and collaborate closely with senior engineers, with the potential to convert to a permanent position. Responsibilities: Support senior engineers in designing, analysing, and testing vehicle cooling systems. Develop 3D models and assemblies in PTC Creo for cooling components and sub-systems. Assist in thermal simulations and system validation activities. Collaborate with cross-functional teams including powertrain, vehicle integration, and manufacturing engineering. Document and communicate design changes, test results, and technical findings. Contribute to continuous improvement initiatives for system efficiency and reliability. Requirements: Bachelor's degree in Mechanical, Automotive, or related Engineering field. Hands-on experience or coursework in thermal management, fluid dynamics, or cooling system design is advantageous. Proficiency in PTC Creo for CAD modeling and assembly creation. Knowledge of vehicle powertrain systems (BEV or diesel) is preferred. Strong problem-solving, analytical, and teamwork skills. Opportunity: Gain experience in BEV and diesel vehicle thermal management systems. Work with cutting-edge technologies in a leading vehicle manufacturing environment. Learn from and collaborate with experienced engineers. Exposure to the full cooling system development lifecycle, from concept through validation. Contract role with the potential to convert to permanent employment.
Apr 03, 2026
Contractor
Cooling Development Engineer (Contract) The client is seeking a Cooling Development Engineer to join their vehicle engineering team on a contract basis, supporting the design and validation of cooling systems for both battery electric vehicles (BEV) and diesel powertrains. This is an excellent opportunity to gain hands-on experience working with PTC Creo and collaborate closely with senior engineers, with the potential to convert to a permanent position. Responsibilities: Support senior engineers in designing, analysing, and testing vehicle cooling systems. Develop 3D models and assemblies in PTC Creo for cooling components and sub-systems. Assist in thermal simulations and system validation activities. Collaborate with cross-functional teams including powertrain, vehicle integration, and manufacturing engineering. Document and communicate design changes, test results, and technical findings. Contribute to continuous improvement initiatives for system efficiency and reliability. Requirements: Bachelor's degree in Mechanical, Automotive, or related Engineering field. Hands-on experience or coursework in thermal management, fluid dynamics, or cooling system design is advantageous. Proficiency in PTC Creo for CAD modeling and assembly creation. Knowledge of vehicle powertrain systems (BEV or diesel) is preferred. Strong problem-solving, analytical, and teamwork skills. Opportunity: Gain experience in BEV and diesel vehicle thermal management systems. Work with cutting-edge technologies in a leading vehicle manufacturing environment. Learn from and collaborate with experienced engineers. Exposure to the full cooling system development lifecycle, from concept through validation. Contract role with the potential to convert to permanent employment.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Job Location: Barrow-in-Furness, Onsite This position requires full-time on-site presence. Please speak to your recruiter for further details. Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with engineering teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core Duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems suitable for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, while keeping up to date with emerging technologies and industry developments Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing guidance on technical matters and professional development Apply engineering expertise supported by a degree in Mechanical Engineering, Engineering, or a relevant Science discipline, with the ability to perform complex calculations, develop technical documentation, and utilise CAD and standard IT tools The Mechanical Platform Systems Team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive. We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 03, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Job Location: Barrow-in-Furness, Onsite This position requires full-time on-site presence. Please speak to your recruiter for further details. Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with engineering teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core Duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems suitable for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, while keeping up to date with emerging technologies and industry developments Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing guidance on technical matters and professional development Apply engineering expertise supported by a degree in Mechanical Engineering, Engineering, or a relevant Science discipline, with the ability to perform complex calculations, develop technical documentation, and utilise CAD and standard IT tools The Mechanical Platform Systems Team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive. We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Engineering Recruitment Consultant with fast track to Directorship Are you an ambitious, high-performing individual ready to build a long-term career in recruitment? Do you want a clearly defined path to leadership, with the opportunity to become a Director and run your own business unit? We are hiring an Engineering Recruitment Consultant to join a high-growth, high-performance team specialising in technical and engineering markets. About the Role This is a full 360 recruitment position , focused on engineering sectors including civil, mechanical, electrical, manufacturing, and infrastructure. You will take full ownership of your market developing client relationships, sourcing top engineering talent, and managing the entire recruitment lifecycle. From day one, you ll have the autonomy to build your own desk with genuine long-term growth potential. Key Responsibilities Drive business development by winning and growing engineering clients Manage the full recruitment cycle, from client briefing through to placement Source, screen, and place high-quality engineering candidates Build and maintain long-term client and candidate relationships Develop deep expertise within your chosen engineering niche Contribute to team growth and support junior consultants as you progress What We re Looking For Ambitious, driven, and career-focused individuals Strong commercial mindset with a target-driven attitude Excellent communication and relationship-building skills Resilient, proactive, and competitive nature Interest in engineering, infrastructure, or technical sectors Clear desire to progress into leadership and Director-level roles Previous recruitment or sales experience is essential attitude and ambition are key. What s on Offer Competitive base salary with uncapped commission Clear, merit-based progression to management and Director level Opportunity to build and lead your own engineering division Structured training programme (recruitment + engineering markets) Ongoing mentorship from senior leadership High-performance, supportive, and entrepreneurial culture Career Progression This role is designed for future leaders. You ll follow a structured path: Consultant Senior Consultant Manager Director As you progress, you ll have the opportunity to build your own team and lead a dedicated business unit and be rewarded with Directorship
Apr 03, 2026
Full time
Engineering Recruitment Consultant with fast track to Directorship Are you an ambitious, high-performing individual ready to build a long-term career in recruitment? Do you want a clearly defined path to leadership, with the opportunity to become a Director and run your own business unit? We are hiring an Engineering Recruitment Consultant to join a high-growth, high-performance team specialising in technical and engineering markets. About the Role This is a full 360 recruitment position , focused on engineering sectors including civil, mechanical, electrical, manufacturing, and infrastructure. You will take full ownership of your market developing client relationships, sourcing top engineering talent, and managing the entire recruitment lifecycle. From day one, you ll have the autonomy to build your own desk with genuine long-term growth potential. Key Responsibilities Drive business development by winning and growing engineering clients Manage the full recruitment cycle, from client briefing through to placement Source, screen, and place high-quality engineering candidates Build and maintain long-term client and candidate relationships Develop deep expertise within your chosen engineering niche Contribute to team growth and support junior consultants as you progress What We re Looking For Ambitious, driven, and career-focused individuals Strong commercial mindset with a target-driven attitude Excellent communication and relationship-building skills Resilient, proactive, and competitive nature Interest in engineering, infrastructure, or technical sectors Clear desire to progress into leadership and Director-level roles Previous recruitment or sales experience is essential attitude and ambition are key. What s on Offer Competitive base salary with uncapped commission Clear, merit-based progression to management and Director level Opportunity to build and lead your own engineering division Structured training programme (recruitment + engineering markets) Ongoing mentorship from senior leadership High-performance, supportive, and entrepreneurial culture Career Progression This role is designed for future leaders. You ll follow a structured path: Consultant Senior Consultant Manager Director As you progress, you ll have the opportunity to build your own team and lead a dedicated business unit and be rewarded with Directorship
Are you a building services engineer or a facilities manager with a technical background? Would you be interested in a change in career? We are looking for individuals from a facilities background who would be interested in working on the consultancy side. You would be involved in asset registers, asset verification, identifying condition of plant and compliance audits. TSA are currently recruiting a M&E Surveyor to work for an owner operated building services consultancy with offices across the UK. The client themselves are a Building Services consultancy that have a natural split in the business of M&E Asset Surveys and Design/Project based work. Due to a large growth their national asset management team they are looking to recruit an individual to assist in the delivery of M&E Condition Surveys, with their current workload spread across education, healthcare, PFI and council portfolio works. They are looking to recruit someone at an intermediate/senior level, this person will be expected to be qualified and proficient, with a good overall knowledge within building services engineering, they will need to communicate effectively and will need to be able to perform their own surveys as part of a team. It would be ideal for the individual to have awareness of asset registers, contract mobilisations, CAFM systems, and recognised maintenance standards such as SFG20. The successful individual will be working as part of a team responsible for logging, tagging and creating condition reports for all mechanical and electrical assets within a variety of environments. If this is of interest, please apply ASAP as we are currently shortlisting for this role.
Apr 03, 2026
Full time
Are you a building services engineer or a facilities manager with a technical background? Would you be interested in a change in career? We are looking for individuals from a facilities background who would be interested in working on the consultancy side. You would be involved in asset registers, asset verification, identifying condition of plant and compliance audits. TSA are currently recruiting a M&E Surveyor to work for an owner operated building services consultancy with offices across the UK. The client themselves are a Building Services consultancy that have a natural split in the business of M&E Asset Surveys and Design/Project based work. Due to a large growth their national asset management team they are looking to recruit an individual to assist in the delivery of M&E Condition Surveys, with their current workload spread across education, healthcare, PFI and council portfolio works. They are looking to recruit someone at an intermediate/senior level, this person will be expected to be qualified and proficient, with a good overall knowledge within building services engineering, they will need to communicate effectively and will need to be able to perform their own surveys as part of a team. It would be ideal for the individual to have awareness of asset registers, contract mobilisations, CAFM systems, and recognised maintenance standards such as SFG20. The successful individual will be working as part of a team responsible for logging, tagging and creating condition reports for all mechanical and electrical assets within a variety of environments. If this is of interest, please apply ASAP as we are currently shortlisting for this role.
Are you a building services engineer or a facilities manager with a technical background? Would you be interested in a change in career? We are looking for individuals from a facilities background who would be interested in working on the consultancy side. You would be involved in asset registers, asset verification, identifying condition of plant and compliance audits. TSA are currently recruiting a M&E Surveyor to work for an owner operated building services consultancy with offices across the UK. The client themselves are a Building Services consultancy that have a natural split in the business of M&E Asset Surveys and Design/Project based work. Due to a large growth their national asset management team they are looking to recruit an individual to assist in the delivery of M&E Condition Surveys, with their current workload spread across education, healthcare, PFI and council portfolio works. They are looking to recruit someone at an intermediate/senior level, this person will be expected to be qualified and proficient, with a good overall knowledge within building services engineering, they will need to communicate effectively and will need to be able to perform their own surveys as part of a team. It would be ideal for the individual to have awareness of asset registers, contract mobilisations, CAFM systems, and recognised maintenance standards such as SFG20. The successful individual will be working as part of a team responsible for logging, tagging and creating condition reports for all mechanical and electrical assets within a variety of environments. If this is of interest, please apply ASAP as we are currently shortlisting for this role.
Apr 02, 2026
Full time
Are you a building services engineer or a facilities manager with a technical background? Would you be interested in a change in career? We are looking for individuals from a facilities background who would be interested in working on the consultancy side. You would be involved in asset registers, asset verification, identifying condition of plant and compliance audits. TSA are currently recruiting a M&E Surveyor to work for an owner operated building services consultancy with offices across the UK. The client themselves are a Building Services consultancy that have a natural split in the business of M&E Asset Surveys and Design/Project based work. Due to a large growth their national asset management team they are looking to recruit an individual to assist in the delivery of M&E Condition Surveys, with their current workload spread across education, healthcare, PFI and council portfolio works. They are looking to recruit someone at an intermediate/senior level, this person will be expected to be qualified and proficient, with a good overall knowledge within building services engineering, they will need to communicate effectively and will need to be able to perform their own surveys as part of a team. It would be ideal for the individual to have awareness of asset registers, contract mobilisations, CAFM systems, and recognised maintenance standards such as SFG20. The successful individual will be working as part of a team responsible for logging, tagging and creating condition reports for all mechanical and electrical assets within a variety of environments. If this is of interest, please apply ASAP as we are currently shortlisting for this role.
Are you a building services engineer or a facilities manager with a technical background? Would you be interested in a change in career? We are looking for individuals from a facilities background who would be interested in working on the consultancy side. You would be involved in asset registers, asset verification, identifying condition of plant and compliance audits. TSA are currently recruiting a M&E Surveyor to work for an owner operated building services consultancy with offices across the UK. The client themselves are a Building Services consultancy that have a natural split in the business of M&E Asset Surveys and Design/Project based work. Due to a large growth their national asset management team they are looking to recruit an individual to assist in the delivery of M&E Condition Surveys, with their current workload spread across education, healthcare, PFI and council portfolio works. They are looking to recruit someone at an intermediate/senior level, this person will be expected to be qualified and proficient, with a good overall knowledge within building services engineering, they will need to communicate effectively and will need to be able to perform their own surveys as part of a team. It would be ideal for the individual to have awareness of asset registers, contract mobilisations, CAFM systems, and recognised maintenance standards such as SFG20. The successful individual will be working as part of a team responsible for logging, tagging and creating condition reports for all mechanical and electrical assets within a variety of environments. If this is of interest, please apply ASAP as we are currently shortlisting for this role.
Apr 02, 2026
Full time
Are you a building services engineer or a facilities manager with a technical background? Would you be interested in a change in career? We are looking for individuals from a facilities background who would be interested in working on the consultancy side. You would be involved in asset registers, asset verification, identifying condition of plant and compliance audits. TSA are currently recruiting a M&E Surveyor to work for an owner operated building services consultancy with offices across the UK. The client themselves are a Building Services consultancy that have a natural split in the business of M&E Asset Surveys and Design/Project based work. Due to a large growth their national asset management team they are looking to recruit an individual to assist in the delivery of M&E Condition Surveys, with their current workload spread across education, healthcare, PFI and council portfolio works. They are looking to recruit someone at an intermediate/senior level, this person will be expected to be qualified and proficient, with a good overall knowledge within building services engineering, they will need to communicate effectively and will need to be able to perform their own surveys as part of a team. It would be ideal for the individual to have awareness of asset registers, contract mobilisations, CAFM systems, and recognised maintenance standards such as SFG20. The successful individual will be working as part of a team responsible for logging, tagging and creating condition reports for all mechanical and electrical assets within a variety of environments. If this is of interest, please apply ASAP as we are currently shortlisting for this role.
Premier Technical Recruitment Ltd
Leicester, Leicestershire
Senior Mechanical Design Engineer East Midlands - commutable from Derby, Leicester and Nottingham c£45k neg dep exp + benefits Our client can demonstrate almost half a century's expertise in the design, development and manufacture of bespoke automation and robotic systems for a diverse range of industry sectors and are regarded by many in the industry as one of the leading automation system solution providers in the whole of the UK. As a result of continued success and a planned programme of strategic growth, they are now seeking to recruit an experienced Lead / Senior Mechanical Design Engineer to complement their established and successful team and deliver innovative special purpose automation machinery projects. Based near Leicester and tasked with both designing and overseeing an array of special purpose machine projects from order acceptance to customer hand over, the successful Senior Mechanical Design Engineer candidate will be responsible for the design, detailing and successful delivery of multiple projects, communicating effectively with customers, suppliers and team members as required and working as part of a team dedicated to delivering projects to on time and within budget. After attending sales hand over meetings and committing to an overall project plan and budget, you will perform mechanical design and detailing functions for multiple projects allocated to you using 3D CAD within the time allocated in the project plan, and will arrange Design Reviews during the design process to ensure they are well executed, meet overall requirements, are designed for assembly, robust & reliable operation, and meet or better budgetary constraints whilst minimising any development issues that may arise. You will also obtain a Design Pass Off by the customer on time and to project plan and ensure that BOM's are produced on time and within budget, and will negotiate with external suppliers in order to obtain the most cost-efficient materials in line with project budgets and timing plans. You will also be responsible for assisting the electrical design process by communicating clearly and effectively through the duration of the project and especially through the mechanical design phase, and will compile a build folder and communicate build details to the machine tool fitters to ensure an efficient build process. Other responsibilities for this varied and challenging Senior Mechanical Design Engineer role will include providing direction and support to fitters, electricians and other engineers within the team as required, and undertaking visits to customer sites as appropriate to fully understand the customer requirements and to obtain measurements for all dimensions, drawings, site layouts and other considerations, and will document and communicate all such requirements to the customer and internal staff respectively. You will assess and improve design concepts along with a team at sales quotation stage to reduce risks, costs, lead times and be skilled in identifying key risks and assist in compiling plans for trials to reduce them. You will obtain all parts, samples and drawings necessary in advance to ensure these can be checked and used through the design phase and will check the design work produced by other designers to ensure accuracy of design work, as well as conducting project reviews with customers on a periodic basis and reporting on the status of each project whilst constructing and maintaining a comprehensive Technical Construction File (TCF) which includes manuals, risk assessments, mechanical parts list and drawings. Other duties will include carrying out machine risk assessments during the design phase to ensure Machinery Directive requirements are met and leading projects during the development and installation phases of the project with pro-active and timely delivery of "problem fixes" whilst ensuring that all H&S and safety rules, guidelines and policies are understood and adhered to at all times. To be considered for this varied and challenging role it is envisaged that the successful candidate will demonstrate considerable competence and experience in mechanical design, robotics, automation, design of mechanical mechanisms and pneumatic systems and will realistically be Degree qualified/HNC/HND or equivalent in Mechanical Engineering or a closely related discipline with a minimum of 7 years' experience in mechanical design role ideally related to automation machinery. You will be an expert user of 3D parametric CAD package, ideally Solidedge however use of Solidworks, Inventor, Creo etc would also be considered, and will demonstrate a proven track record of successfully delivering mechanical design projects to required timescale and budgetary constraints. Knowledge and understanding of the various national and international standards for machine design and machine safety systems and requirements to CE mark machine systems is required, as is a self-motivated positive "can do" approach to problem solving. You will be commercially aware of the actions and responsibilities of your role when dealing with customers and able to communicate effectively at all levels and demonstrate a track record of being part of a multi-disciplined team to solving problems. Contact the Design Team at Premier Technical Recruitment on or email your cv in confidence to for further details.
Apr 02, 2026
Full time
Senior Mechanical Design Engineer East Midlands - commutable from Derby, Leicester and Nottingham c£45k neg dep exp + benefits Our client can demonstrate almost half a century's expertise in the design, development and manufacture of bespoke automation and robotic systems for a diverse range of industry sectors and are regarded by many in the industry as one of the leading automation system solution providers in the whole of the UK. As a result of continued success and a planned programme of strategic growth, they are now seeking to recruit an experienced Lead / Senior Mechanical Design Engineer to complement their established and successful team and deliver innovative special purpose automation machinery projects. Based near Leicester and tasked with both designing and overseeing an array of special purpose machine projects from order acceptance to customer hand over, the successful Senior Mechanical Design Engineer candidate will be responsible for the design, detailing and successful delivery of multiple projects, communicating effectively with customers, suppliers and team members as required and working as part of a team dedicated to delivering projects to on time and within budget. After attending sales hand over meetings and committing to an overall project plan and budget, you will perform mechanical design and detailing functions for multiple projects allocated to you using 3D CAD within the time allocated in the project plan, and will arrange Design Reviews during the design process to ensure they are well executed, meet overall requirements, are designed for assembly, robust & reliable operation, and meet or better budgetary constraints whilst minimising any development issues that may arise. You will also obtain a Design Pass Off by the customer on time and to project plan and ensure that BOM's are produced on time and within budget, and will negotiate with external suppliers in order to obtain the most cost-efficient materials in line with project budgets and timing plans. You will also be responsible for assisting the electrical design process by communicating clearly and effectively through the duration of the project and especially through the mechanical design phase, and will compile a build folder and communicate build details to the machine tool fitters to ensure an efficient build process. Other responsibilities for this varied and challenging Senior Mechanical Design Engineer role will include providing direction and support to fitters, electricians and other engineers within the team as required, and undertaking visits to customer sites as appropriate to fully understand the customer requirements and to obtain measurements for all dimensions, drawings, site layouts and other considerations, and will document and communicate all such requirements to the customer and internal staff respectively. You will assess and improve design concepts along with a team at sales quotation stage to reduce risks, costs, lead times and be skilled in identifying key risks and assist in compiling plans for trials to reduce them. You will obtain all parts, samples and drawings necessary in advance to ensure these can be checked and used through the design phase and will check the design work produced by other designers to ensure accuracy of design work, as well as conducting project reviews with customers on a periodic basis and reporting on the status of each project whilst constructing and maintaining a comprehensive Technical Construction File (TCF) which includes manuals, risk assessments, mechanical parts list and drawings. Other duties will include carrying out machine risk assessments during the design phase to ensure Machinery Directive requirements are met and leading projects during the development and installation phases of the project with pro-active and timely delivery of "problem fixes" whilst ensuring that all H&S and safety rules, guidelines and policies are understood and adhered to at all times. To be considered for this varied and challenging role it is envisaged that the successful candidate will demonstrate considerable competence and experience in mechanical design, robotics, automation, design of mechanical mechanisms and pneumatic systems and will realistically be Degree qualified/HNC/HND or equivalent in Mechanical Engineering or a closely related discipline with a minimum of 7 years' experience in mechanical design role ideally related to automation machinery. You will be an expert user of 3D parametric CAD package, ideally Solidedge however use of Solidworks, Inventor, Creo etc would also be considered, and will demonstrate a proven track record of successfully delivering mechanical design projects to required timescale and budgetary constraints. Knowledge and understanding of the various national and international standards for machine design and machine safety systems and requirements to CE mark machine systems is required, as is a self-motivated positive "can do" approach to problem solving. You will be commercially aware of the actions and responsibilities of your role when dealing with customers and able to communicate effectively at all levels and demonstrate a track record of being part of a multi-disciplined team to solving problems. Contact the Design Team at Premier Technical Recruitment on or email your cv in confidence to for further details.
