43 jobs found

Quality Inspector (Night Shift) Location: Byfleet, Surrey (On-site) About the Role Our client is a highly respected precision aerospace engineering organisation in the UK, manufacturing complex components and assemblies for the global aircraft industry. Working with major aerospace customers, they are seeking an experienced Quality Inspector to support production quality, customer returns management, and reporting activities. This position plays a critical role in ensuring that in-process and finished products meet drawing specifications, customer requirements, and internal standards. Depending on experience, inspection activities may include mechanical inspection, CMM operation, and First Article Inspection reporting using Visual FAIR software. Key Responsibilities - Quality Inspector Deliver inspection output targets in line with work-to lists Interpret engineering drawings and specifications, following Standard Operating Procedures (SOPs) Verify that equipment used is suitable to achieve customer specifications and report any deficiencies Confirm job cards are correctly signed and stamped before commencing work Perform in-process and final inspection of high-tolerance components using GD&T methods and standard metrology techniques (including hand gauges) Compile First Article Inspection Reports using Visual FAIR Conduct CMM inspections using DEA Global CMM equipment with PCDMIS software (including running and programming) Ensure parts are clean and meet quality standards before progressing to the next stage Customer Service Manage customer returns and liaise with internal and external stakeholders to maintain strong working relationships Administration Accurately document inspection findings and complete operational records Raise and process NCRs and MRBs as required Assist with the compilation of monthly quality statistics Quality Maintain a clean, organised, and safe inspection area Ensure correct storage and protection of parts Verify all components meet drawing and specification requirements and report non-conformances Health & Safety Work safely at all times in compliance with company safety policies Adhere to PPE requirements Team & Collaboration Liaise across departments to support production schedules Provide training or coaching to colleagues where required Follow company policies and procedures Escalate issues appropriately to management Participate in team meetings, one-to-ones, and continuous improvement initiatives Additional Duties Act as a first aider or fire warden on a rotational basis (if trained) Undertake any other reasonable duties required by the business Person Specification - Essential Valid right to live and work in the UK Minimum 3 years' inspection experience within a manufacturing or engineering environment Proven experience using GD&T methods and shop mathematics (including trigonometry) Ability to interpret engineering drawings and work instructions Strong communication skills and ability to build positive working relationships Professional, proactive, and accountable approach to work Flexible to meet business needs, including occasional overtime or travel Strong team player with a collaborative mindset Desirable Aerospace industry experience Experience with Visual FAIR software CMM inspection experience using PCDMIS What Our Client Offers Opportunity to work within a high-precision aerospace environment Stable, long-term career prospects Collaborative team culture Competitive salary (dependent on experience) Quality Inspector / Aerospace / Quality Inspection / Aviation Job Types: Full-time, Permanent

Senior Quality inspector x 4 Inside IR35 Full time on site Play a critical role in building world-class submarines that protect national security. Role Description The role holder: The role of the Quality Inspector II is to undertake inspections of the product during build in accordance with the relevant inspection and test plans Competent Quality professional capable of working under their own initiative and providing guidance to more junior members of the Quality department within own capability and skill base areas A member of the Quality team who escalates problems where required Conduct Quality activities in accordance with the relevant processes and procedures and update where required Domain areas include, but are not limited to: Dimensional Control, Electrical, Paint, Pipe/Mechanical, Radiography, Structural / Steelwork, Non-Destructive Examination (Weld Inspection), Receipt Inspection, Sheet Metalwork, Acoustic Tiling Core Duties The role holder: Work as a fully contributory member of the Quality team Responsible for demonstrating SHE and responsible business behaviours Responsible for conducting conditions management and customer walk-round audits Undertake routine Quality inspection activities in their related area with no supervision Undertake non-routine/complex activities in their related area with minimal supervision Manage own development Able to access, have a clear understanding of and apply the local Management System documentation e.g. policies, procedures, workmanship standards, risk assessments and COSHH assessments and processes and apply in their related area Liaise / interface with appropriate areas of the business and build effective relationships Utilise calibrated measuring equipment to assess and measure tolerances of the product and record any non-conformances Responsible for conducting the verification of non-conformances Report results of inspections using agreed processes Use of Company computer systems and software as appropriate The ability to articulate and deliver Quality objectives The ability to contribute in team meetings and working groups Represent the department at local Quality reviews and liaise with the customer when required The ability to write reports and presentations and support others, ensuring accuracy and clarity of meaning The ability to deliver results Leadership Responsibilities The role holder: Deputise for the Quality Team Leader as and when required Budget Responsibilities The role holder: None Competencies Knowledge: Awareness of ISO 9001/ EN9100 standards Good understanding of own discipline and end to end requirements within Quality Inspection Understand how their own role and team fit into overall objectives of the function Knowledge of product safety requirements Export requirements knowledge (for example International Traffic in Arms Regulations (ITAR (where applicable) Knowledge of the Programme Inspection and Test Plan and how it is implemented Skills: The ability to use and train others in the use of technology and tools applicable to the discipline The ability to interpret specifications, procedures and contract requirements Effective stakeholder management Qualifications: NC or HNC qualified in an appropriate technical discipline or equivalent experience: Tradal background - time served in trade discipline

Exciting new Jobs for a fast-moving, Progressive Group due to expansion, we are looking for a few Back Shift PDI / Sales Preparation Vehicle Technicians to keep up with demand within their sales department, getting cars ready for resale. The skill range can be level 2 or level 3, so Semi-Skilled or Qualified Technicians who want to learn more, or an established Qualified Technician wanting to work in our client's world-class, well-equipped and clean workshop with superb facilities to make you feel at home. This is a crucial role in the success of the business, as such, they offer a great package which sets them apart from other companies in their local area. The salary on offer is 36,960 5 days a week, only Monday to Friday Monday to Thursday 3pm - 1am, Friday 3pm-8pm. On Top of this, if you have an MOT licence, you are paid 2,000 extra a year, and they will keep your licence up to date by allowing you to do MOTs too. However, this role is for a Vehicle Technician. Some of the perks within this PDI Vehicle Technician role are as follows: Training: You will receive training from your manager, but our client often funds development training courses for their loyal staff members. Working alongside lots of other Technicians & Master Techs in a no Bonus Environment, so help is always on hand if you need it. Great TEAM Environment. Discounted Company Voucher Scheme. Gaining experience from colleagues in a professional environment. Hybrid and EV Training can be offered to established staff. Excellent working environment - brilliant facilities. Monday to Friday ONLY Uniform given, heated workshop & parking on site. No Customers to interact with - all interaction with Workshop Controllers & Managers This is an exciting opportunity for a Vehicle Technician to join a company that is committed to ensuring their staff enjoy work with lots of progression on offer within a constantly growing. Your typical duties will include: General Servicing and light mechanical repairs Getting Used Cars retail-ready for resale (brakes, pads, suspension, head unit replacements - no heavy mechanics) Diagnose and repair vehicles following manufacturer guidelines PDI (Pre-Delivery Inspection) Complete the final quality check on all vehicles, then the car goes off to have a fresh MOT licience. We are also recruit candidates with the following skill sets: Panel Beater, Panel Technician, Bodyshop MET, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident repair, Vehicle body repair, coach builder, Vehicle Polisher, Vehicle Prepper, SMART repairer, Vehicle Inspector, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Managers.

Logic360 Company Name: Logic 360 Ltd Job Opportunity: Vehicle Inspector Location: Thurleigh Employment Type: Temp to Permanent Working Shift Patterns: Monday to Friday Working Hours: 07.30am to 17:00 Salary: £16.80 per hour The Role Within this role, you will be working as a part of an experienced workshop team, ensuring our vehicles are finished to the highest standard for our customers, under the support and guidance of the supervisor and Workshop Manager. Responsibilities Examine assigned vehicles to determine if safety or service work is required Document all work recommended on assigned repair order Conduct road test to determine work needed Perform all levels of diagnosis and repair on the vehicle Assist and help fellow technicians in the shop with vehicle diagnosis Other ad-hoc bookings Mechanical inspection experience imperative Skills and expertise Minimum 1 year of previous experience in a similar role as a Vehicle Inspector or Technician Full UK Driving Licence with ability to drive both manual and automatic cars You will be passionate to work within the motor industry and take pride in their work, to the highest standards of work set by customers You will need to work independently on vehicles and have experience to make decisions when required Excellent attention to detail How to Apply: If you are a passionate and qualified Vehicle Inspector looking to take the next step in your career, we want to hear from you! Please send your CV to (url removed) or apply through our website at Logic 360 Group. Equal Opportunity Employer: Logic 360 Ltd is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We look forward to receiving your application and learning more about how you can contribute to our team. Thank you for considering Logic 360 Ltd as your next career destination! Please note that Logic 360 is a Recruitment Agency and Employment Business recruiting on behalf of our client. INDAUT

Precision. Pride. Quality. If you're the kind of person who spots the smallest detail and takes real satisfaction in getting things right , this could be the role for you. With a 4 day week and competitive pay, this is a hands-on, practical role where your expertise directly impacts the final product. We're recruiting a Pre-Delivery Inspector (PDI) to play a vital part in ensuring high-quality vehicles are delivered exactly to specification. Role Overview Job Title: PDI Inspector Location: Warwick Pay Rate: 15.91 - 18.26 per hour (DOE) Hours: 37 hours per week Monday to Thursday, 06:45 - 16:15 The Role Working as part of a Manufacturing Quality function, you'll be responsible for inspecting vehicles throughout the build and prior to release. Your focus will be on quality, compliance, and accuracy, ensuring each vehicle meets both internal standards and customer requirements before sign-off. This position suits someone who enjoys a fast-paced production environment and takes pride in maintaining high standards while contributing to continuous improvement. Key Responsibilities of PDI Inspector Carry out detailed in-process and final quality inspections on vehicles Check torque settings, hydraulic pressures, and build integrity against specifications Test vehicles in line with established inspection and quality procedures Verify customer requirements are fully met before vehicles are released Accurately record build standards, inspection results, and any non-conformances Work collaboratively with manufacturing teams to reinforce quality standards Provide feedback and data to support continuous improvement initiatives What are we looking for in a PDI Inspector? Strong mechanical knowledge of vehicles (light vehicles or HGVs) Previous experience in a PDI Inspection role, vehicle inspection, quality, or specialist assembly is advantageous Good understanding of hydraulic systems and quality assurance principles Comfortable working to deadlines and adapting to changing priorities A proactive team player with a positive, "can-do" attitude Willingness to learn and develop new technical skills Desirable (but not essential) Mechanical qualifications HGV licence or tachograph training Experience within a production or manufacturing environment Full UK driving licence Flexibility to support overtime when required If you are passionate about quality, detail-driven, and ready to play a key role in delivering excellence, then we would love to hear from you. Contact Sophie Ranson at E3 Recruitment for more information about the PDI Inspector role.

The quality inspector shall travel to the supplier facilities to perform Sorting OW panels for hole offset issue. Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection accept / reject information directly to the customer via web application. Requirements: Candidate must have practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. The inspections will be performed to engineering requirements specified per ANSI Y14.5 - Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defence manufacturing with proficiency using Microsoft Word and Excel. Candidate should be computer savvy and own a laptop for this assignment. Will be working as an independent contractor. NB. this role is OUTSIDE IR35

Chief Mechanical Inspectors opportunity in this fast growing revitalised aerospace precision engineering company. the role will lead the companies inspection and metrology function, ensuring the highest standards of product quality and conformity. The successful candidate will manage inspection processes, mentor and grow a team of inspectors, and take ownership of CMM programming (Mcosmos) and FAI reporting (Net-Inspect).Key responsibilities- Lead and coordinate day-to-day inspection activities across multiple product lines.- Develop, validate and optimise CMM programs; act as senior CMM programmer for complex parts.- Create and maintain inspection routines and reports using mCosmos and NetInspect.- Implement and enforce inspection standards, procedures and quality controls (FAI, SPC, APQP).- Interpret engineering drawings and apply GD&T for measurement planning and reporting.- Train and mentor junior inspectors and technicians in metrology best practices and software tools.- Investigate non-conformances, drive root-cause analysis and implement corrective actions.- Collaborate with manufacturing, engineering and supply chain teams to support product launches and continuous improvement.- Maintain calibration and equipment records; ensure metrology lab compliance with relevant standards.Essential skills and experience- Proven experience as an inspector or chief inspector in a manufacturing or precision engineering environment.- Strong practical experience programming CMMs and acting as a CMM programmer.- Demonstrable expertise with NetInspect and mCosmos inspection software.- Excellent understanding of GD&T, measurement principles and metrology techniques.- Experience with inspection reporting, first article inspection and statistical process control.- Strong leadership, communication and team development skills.- Excellent attention to detail and problem-solving ability.This is a senior permanent opportunity in a fast growing successful company. Starting salary is entirely negotiable and dependant on experience. You must have current UK right to work to be considered. HRGO are a recruitment agency supporting UK Manufacturing. We aim to respond to all applications.

Chief Mechanical Inspectors opportunity in this fast growing revitalised aerospace precision engineering company. the role will lead the companies inspection and metrology function, ensuring the highest standards of product quality and conformity. The successful candidate will manage inspection processes, mentor and grow a team of inspectors, and take ownership of CMM programming (Mcosmos) and FAI reporting (Net-Inspect). Key responsibilities - Lead and coordinate day-to-day inspection activities across multiple product lines. - Develop, validate and optimise CMM programs; act as senior CMM programmer for complex parts. - Create and maintain inspection routines and reports using mCosmos and NetInspect. - Implement and enforce inspection standards, procedures and quality controls (FAI, SPC, APQP). - Interpret engineering drawings and apply GD&T for measurement planning and reporting. - Train and mentor junior inspectors and technicians in metrology best practices and software tools. - Investigate non-conformances, drive root-cause analysis and implement corrective actions. - Collaborate with manufacturing, engineering and supply chain teams to support product launches and continuous improvement. - Maintain calibration and equipment records; ensure metrology lab compliance with relevant standards. Essential skills and experience - Proven experience as an inspector or chief inspector in a manufacturing or precision engineering environment. - Strong practical experience programming CMMs and acting as a CMM programmer. - Demonstrable expertise with NetInspect and mCosmos inspection software. - Excellent understanding of GD&T, measurement principles and metrology techniques. - Experience with inspection reporting, first article inspection and statistical process control. - Strong leadership, communication and team development skills. - Excellent attention to detail and problem-solving ability. This is a senior permanent opportunity in a fast growing successful company. Starting salary is entirely negotiable and dependant on experience. You must have current UK right to work to be considered. HRGO are a recruitment agency supporting UK Manufacturing. We aim to respond to all applications.

Vehicle Inspector - Avonmouth £13.00 per hour Monday to Friday 07:00 - 16:30 We are currently recruiting for a Vehicle Inspector to join a busy automotive operation based in Avonmouth . This is a great opportunity for someone with good mechanical awareness who takes pride in delivering high standards of quality and safety click apply for full job details

Do you have a background working as a Quality Inspector? And do you have experience of mechanical engineering? This could be the role for you! We're recruiting on behalf of a well-established client who are looking to appoint a Quality Inspector to join their Quality team. The role focuses on ensuring mechanical components, sub-assemblies and finished products meet required engineering, quality and compliance standards, helping to support smooth production and customer expectations. Quality Inspector - Key responsibilities - Mechanical Engineering Inspect incoming mechanical parts against engineering drawings, specifications and purchase order requirements Complete in-process and final inspections of components and assemblies Identify, record and escalate non-conformances in line with QMS procedures Assist with root cause investigations and corrective actions when issues arise Read and interpret technical drawings, tolerances and specifications accurately Help maintain calibration compliance and traceability of inspection equipment Accurately log inspection outcomes and quality data within the ERP system Support goods-in and goods-out checks during busy periods to prevent delays Quality Inspector - Essential experience - Mechanical Engineering Mechanical engineering background or strong hands-on inspection experience Confident working with mechanical drawings and tolerances Previous experience in quality inspection or mechanical inspection Good computer skills High attention to detail with a structured, methodical approach Exposure to ATEX, industrial or hazardous-area equipment Quality Inspector, Mechanical Engineering If you're interested, apply today and we'll share full details on the client and the next steps in the process.

Mechanical Inspector 12 Month Contract Based in Bolton Offering 28.35ph Inside IR35 Are you an experienced Mechanical Inspector? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Mechanical Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! You will be involved in: Certify the product in line with the product certification procedure Examining for correct assembly Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc Inspect for physical damage Inspection checks non-product certification Monitor product certification operators Check and complete all paperwork associated with the manufacturing data pack Control defect items via segregation from good product Raise and maintain relevant data records/defect reports Produce relevant inspection/quality control documentation/history sheets Care for and use specialised inspection tools Maintain product certification and approval via regular audits Ensure compliance with all associated procedures applicable to the manufacturing process Ensure inspection times are met Your skillset may include: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21or HNC Several years' experience as a skilled person IPC 610 certified / trained preferred If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Mechanical Inspector 12 Month Contract Based in Bolton Offering 28.35ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

We are currently recruiting for an Inspector in the Inspection department at our clients Denham site where you'll undertake a variety of processes for product verification of parts and components on a shift basis. Aspects of the role include to: Carry out testing/inspection of components using a variety of processes and techniques. Generate, maintain inspection documentation. Using SAP to accurately record all work in progress. Track processing of component batches through the manufacturing process and update records accurately and regularly Accurately record the location of components and parts Record all non-conforming products. Characteristics & Skills Inspection experience. Numeracy and geometry skills with a working knowledge of GDT. Broad experience of reading and interpreting engineering drawings Experience of using Inspection Tools and Equipment General work background in manufacturing / engineering Basic grounding in H&S policies and procedures Basic PC (Microsoft Office) and SAP skills You will have the opportunity to work alongside experts who will help you to obtain a wide understanding of an engineering/manufacturing business and you'll develop new skills and gain a strong industry experience. Your benefits in detail Highly competitive 9% non-contributory pension scheme (18+) 4x salary Life Assurance (18+) Personalised training and development plan. Healthcare Cash Plan. 25-days annual leave plus bank holidays. Opportunity to purchase additional annual leave. Workplace Nursery Benefit. Cycle to work scheme (including e-bikes) Discounts Plan

Quality Control Inspector We have an opportunity for a Quality Control Inspector to join our team at Honeywell, in Edinburgh , where you will conduct in-depth inspections, analyse data, and collaborate with teams to drive continuous quality improvements and ensure compliance. This is a full time, permanent role, with the following shift pattern: Mondays - Thursdays 8:25am - 5:05pm and Fridays 8:25am - 1:20pm. Honeywell Honeywell Aerospace products and services are used on virtually every commercial, defense, and space aircraft. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components. Our hardware and software solutions help create more fuel-efficient aircraft, more direct and on-time flights and safer skies. Safer, More Fuel-Efficient Flying and Innovations for the Future of Aviation. Key Responsibilities Inspection of incoming and outgoing material Inspection using traditional inspection techniques for mechanical parts. Inspection of WIP for issues identified. Support Production and Engineering on Quality performance investigations. Key Skills and Qualifications Confident using windows-based PC programs Proven record of inspection equipment Previous Skills working within an Inspection environment Proven competence in a similar role Demonstrate excellent dexterity and hand-eye co-ordination Our Offer Opportunity to work on cutting-edge technologies with global impact. A collaborative and innovative environment within a world-leading technology company. Professional development and career growth opportunities. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Join us now and be part of a global team of thinkers, innovators, dreamers, and doers who make the things that make the future!

Level 2 NDT Technician (MPI / DPI) - Aerospace Salary : £22.20 per hour (inclusive of shift allowance) Location : Bromford Precision Solutions Limited Leicester - LE3 1UQ Shift Pattern : 46.40 Night Shift - 18.00 - 06.00 Monday to Thursday Opportunity Summary: We have a vacancy for a Quality Inspector/Level 2 NDT Technician. Role Accountabilities: Inspection: • To carry out 1st off Inspection (CMM / Manual) / Receipt Inspection / Inspection and• Calibration activities as required to support operations.• Running CMM programmes; analysing and recording results and making appropriate quality• decisions.• Maintaining the integrity of CMM programs ensuring programs are maintained and stored• correctly.• To support the internal non-conformance process; raising rejects and ensuring all containment is captured.• To liaise closely with Engineering to ensure the smooth transition of new products - New• Product Introduction (NPI).• Completion of FAIR packs by means of CMM / Manual Inspection. NDT: • Perform Inspection operations (MPI DPI and Visual) in accordance with procedures.• Ensure NDT equipment is maintained and suitable for the operation.• Conduct control checks and test in accordance with procedures.• Interpretation and evaluation of test results against defined acceptance standards.• Generate work instructions in preparation for Level 3 approval.• Manage workflow to meet production requirements.• Prepare and authorise product test reports.• Achieve and maintain Level 2 approval in the relevant Non-Destructive Test method to ensure cover within the BromfordPS.• Conduct test and inspections to ensure product is conforming to customer product• Specifications and definitions.• Ensure parts are processed in accordance with business work priorities on a timely basis. Person Specification: • 5 years' experience in the Aerospace/Automotive Industry in a similar role.• Level 2 NDT Certificate in Penetrant Inspection.• Working to production timelines in a manufacturing environment.• Working with SOPs and Company specific documentation.• Self-driven, results orientated, with a positive outlook.• Able to get on with others and be a team-player.• Attention to detail and accuracy at all times.• Working to deadlines.• Managing workload effectively, prioritising where necessary. If you require any further information, please do not hesitate to contact the HR Department. You may also have experience in the following: Level 2 NDT Technician, NDT Inspector, Quality Inspector (Manufacturing), Aerospace Quality Inspector, Non-Destructive Testing Technician, MPI Inspector (Magnetic Particle Inspection), DPI Inspector (Dye Penetrant Inspection), CMM Inspector, CMM Operator, FAIR Inspector (First Article Inspection), Mechanical Inspector, Inspection Technician (Aerospace/Automotive), Quality Control Inspector, NDT Level 2 Penetrant Technician, Manufacturing Quality Technician REF-

Mechanical Inspector Location: Basildon, Essex Salary: 37,600 Hours: Monday to Thursday 07:00 to 16:00, Friday 07:30 to 12.30 About the Role We are recruiting for a Mechanical Inspector to join a leading international engineering and manufacturing company based in Basildon. This is an excellent opportunity for a skilled Mechanical Inspector, Quality Inspector, or CMM Inspector with an aerospace or precision engineering background to take the next step in their career. You will work within a modern, high-spec facility supplying precision components to the aerospace industry, ensuring all parts meet strict quality standards and supporting a Right First Time production philosophy. What's on Offer Monday to Thursday 07:00 to 16:00, Friday 07:30 to 12.30 Overtime paid at enhanced rates 25 days holiday plus bank holidays Death in service benefit (2x annual salary) Company pension scheme Employee Assistance Programme (EAP) Free on-site parking Key Responsibilities Carry out mechanical inspection of aerospace components at all stages of manufacture Conduct First Article Inspection (FAI) and manage non-conformance reports (NCRs) Support and maintain the Quality Management System (QMS) and perform internal audits Use precision inspection tools including verniers, micrometers, bore micrometers, height gauges, and DTIs Identify recurring quality issues and recommend corrective and preventive actions Conduct root cause analysis (5Y, 8D, SPC) and drive continuous improvement initiatives Support New Product Introduction (NPI) using FMEA, APQP, and PPAP methodologies Manage calibration control for all measurement instruments Collaborate with cross-functional teams to enhance quality and efficiency Skills & Experience Time-served Mechanical or Quality Inspector from an engineering or aerospace environment Strong ability to interpret engineering drawings and specifications Experience with ISO 9001 / AS9100 quality systems and internal auditing Background in precision machining, fabrication, or surface treatments Knowledge of NADCAP processes desirable Experience using Lean Manufacturing tools such as Kaizen, 5S, and Continuous Improvement CMM experience advantageous but not essential Excellent attention to detail and ability to work independently If you are a Mechanical Inspector or Quality Engineer looking for a rewarding role within a respected aerospace manufacturer, apply now or call Appointments to find out more. Candidates who require sponsorship now or in the future will not be considered for this position

Mechanical Inspector Malton, York YO17 Salary: £27,500 to £30,000 per annum dependent on skills and experience Hours: 8:00am - 4:00pm (30-minute lunch) Holidays: 20 days + statutory Full-time, permanent The Role We are recruiting a Mechanical Inspector to support quality, compliance and manufacturing continuity within a regulated engineering environment. This role is responsible for inspecting mechanical components, assemblies and finished items to ensure they meet defined engineering, quality and customer requirements. Reporting to the QA Manager, you will play a key role in maintaining inspection standards, supporting production flow and ensuring accurate quality documentation. Key Responsibilities Inspect incoming mechanical components against engineering drawings, specifications and purchase orders Carry out in-process and final inspections of mechanical parts and assemblies Identify, document and raise non-conformances in line with quality management procedures Interpret mechanical drawings, tolerances and technical specifications Perform dimensional inspections using manual measuring equipment and CMM equipment where applicable Support calibration activities and maintain accurate calibration records Record inspection results and quality data accurately within the ERP system Support Goods-In and Goods-Out inspection activities during peak periods Liaise with Purchasing, Stores and Production to resolve quality-related issues Maintain high standards of housekeeping, safety and compliance, including ATEX and customer requirements Skills, Knowledge and Experience Essential Mechanical engineering background or equivalent practical experience Proven experience in mechanical inspection or quality assurance Strong ability to read and interpret mechanical engineering drawings ERP system experience for recording inspection and quality data Good IT skills, including MS Word and Excel Excellent attention to detail and a methodical approach Desirable CMM machine experience Experience of ISO-based quality management systems Document control experience in a regulated environment Exposure to ATEX, industrial or hazardous-area equipment Personal Attributes High level of accuracy and accountability Calm, structured and reliable under pressure Clear communicator with engineering and operations teams Proactive with a strong commitment to quality and continuous improvement Interested in this Mechanical Inspector role? Please apply with your latest CV. INDHS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.

Job Title: Quality Assurance / Production Supervisor Location : Poole, Dorset Salary: 35,000 per year Job Type: Permanent, Full time Working Hours: 40 hours per week, 8.00-17.00 Mon-Fri About Us: Vent Engineering is a leader in the design, manufacture, and installation of smoke ventilation control systems. About the role: We are seeking a hands-on, detail-driven Production & Quality Supervisor to lead a small team building life-safety control panels. Success in this role is measured by defect reduction, compliance with standards, on-time delivery, and developing team capability. Key Responsibilities: Production Supervision: Oversee daily production activities, ensuring safe working practices, quality output, and timely delivery within budget. Supervise and support a team of 3-6 technicians, assigning tasks and monitoring performance. Plan and coordinate workflow, quickly resolving production or quality issues. Ensure full compliance with health and safety regulations on the shop floor. Work closely with design, engineering, and project teams to ensure seamless transition from design to build. Quality Assurance: Enforce established quality control procedures, while suggesting and implementing improvements where needed. Perform electrical and mechanical inspections and functional testing of control panels. Maintain quality records to ensure traceability and compliance with industry standards. Investigate non-conformances, carry out root-cause analysis, and drive corrective and preventive actions. Deliver continuous improvement initiatives to reduce defects, raise compliance, and improve efficiency. Documentation & Compliance: Ensure all production and quality documentation is completed accurately, promptly, and in line with ISO 9001 standards. Support internal and external audits as required. Stay current with relevant BS EN and related regulatory changes. Ideal Candidate: Essential: Proven experience in electrical manufacturing or control panel production, ideally in life-safety or building services. Strong understanding of electrical and mechanical systems, with both supervisory oversight and hands-on testing capability. Excellent knowledge of quality assurance methodologies, including root-cause analysis and corrective action processes. Strong leadership, communication, and organisational skills. Ability to read and interpret technical drawings and wiring schematics. Proficiency in using testing and diagnostic equipment for control panels. Desirable: Level 3 engineering qualification or higher. Direct experience with ISO 9001 audits and compliance. Working knowledge of PLC control panels. What We Offer: Generous holiday allowance: 23 days plus bank holidays, increasing with service up to 30 days. Group Pension Scheme. Private Bupa health plan (company-funded after qualifying period). Up to 100% company-funded Development Programme to support your career progression. Opportunity to work with one of the UK's top four smoke ventilation specialists, active across industry working groups. A respected, stable employer with over 35 years' experience in life-safety systems. Please click the APPLY button to submit your CV for this role Candidates with experience or relevant job titles of; Quality Officer, Quality Team Leader, Quality Assurance Inspector, Quality Compliance Officer, Manufacturing Quality Control and Production Quality Assurance, Production Supervisor, Production Team Leader, Senior Production Operative, Electrical Manufacturing Operative may also be considered for this role.

Quality Inspector - 41k - Surrey Platform Recruitment has partnered with a leading manufacturer. They are looking to take on a quality inspector who can inspect parts and assemblies in accordance with applicable data package requirements, using a range of measuring equipment. Key responsibilities: + Complete formal First Article inspection activities. + Test and troubleshoot electro-mechanical systems. + Component and assembly testing in accordance with Acceptance Test Procedures using a range of test equipment. Key skills: + Ability to create programs from CAD models and make adjustments to programs + Proficiency in all standard inspection equipment and tools, (CMM essential) + Understanding of Mechanical and Electrical Engineering The salary will be up to 42k depending on previous experience with great company benefits. If you feel like you have the right skills and experience for this role, then please apply with a copy of your updated CV.