HSEQ - Technical & Projects Safety Manager UK Based Travel Required Competitive + Benefits We are recruiting for a Technical & Projects Safety Manager to lead Health, Safety, Environmental and Quality performance across technical operations and project delivery activities. This is a senior, visible role responsible for ensuring CDM compliance, strengthening technical safety governance and driving continuous improvement across construction and facilities management projects. Key Responsibilities Lead HSEQ strategy across technical and project environments, ensuring compliance with CDM 2015 and wider UK legislation. Provide expert guidance on pre-construction information, design risk management and construction phase planning. Line manage and mentor HSEQ Advisors, setting inspection targets and supporting professional development. Oversee incident investigations, including RIDDOR reporting and independent reviews where required. Manage the audit programme, monitor compliance performance and ensure corrective actions are implemented. Support operational and Facilities Management teams with risk assessments, RAMS reviews and high-risk project activities. Deliver CDM awareness training, safety communications and performance reporting to senior leadership. What We re Looking For NEBOSH Diploma (or equivalent Level 6 qualification) essential. Strong working knowledge of CDM 2015 Regulations within construction and FM environments. IOSH membership (minimum Tech level) desirable. Experience implementing and auditing ISO 9001, 14001 and 45001 management systems. Proven leadership experience within technical, engineering or construction-focused HSEQ roles. Strong stakeholder engagement skills, with the ability to influence senior leaders, operational teams and clients. Full UK driving licence and willingness to travel, including occasional overnight stays. PR/(phone number removed) (url removed) (phone number removed)
Mar 25, 2026
Full time
HSEQ - Technical & Projects Safety Manager UK Based Travel Required Competitive + Benefits We are recruiting for a Technical & Projects Safety Manager to lead Health, Safety, Environmental and Quality performance across technical operations and project delivery activities. This is a senior, visible role responsible for ensuring CDM compliance, strengthening technical safety governance and driving continuous improvement across construction and facilities management projects. Key Responsibilities Lead HSEQ strategy across technical and project environments, ensuring compliance with CDM 2015 and wider UK legislation. Provide expert guidance on pre-construction information, design risk management and construction phase planning. Line manage and mentor HSEQ Advisors, setting inspection targets and supporting professional development. Oversee incident investigations, including RIDDOR reporting and independent reviews where required. Manage the audit programme, monitor compliance performance and ensure corrective actions are implemented. Support operational and Facilities Management teams with risk assessments, RAMS reviews and high-risk project activities. Deliver CDM awareness training, safety communications and performance reporting to senior leadership. What We re Looking For NEBOSH Diploma (or equivalent Level 6 qualification) essential. Strong working knowledge of CDM 2015 Regulations within construction and FM environments. IOSH membership (minimum Tech level) desirable. Experience implementing and auditing ISO 9001, 14001 and 45001 management systems. Proven leadership experience within technical, engineering or construction-focused HSEQ roles. Strong stakeholder engagement skills, with the ability to influence senior leaders, operational teams and clients. Full UK driving licence and willingness to travel, including occasional overnight stays. PR/(phone number removed) (url removed) (phone number removed)
Role Overview We are seeking an experienced and motivated Fire Alarm Engineer to carry out the installation, servicing, maintenance, and fault-finding of fire alarm systems across the North West. The role involves working across commercial, industrial, and residential sites, ensuring all systems comply with current regulations and standards. Key Responsibilities Install and maintain fire alarm systems in line with BS 5839 standards Service and maintain existing fire alarm systems Diagnose faults and carry out effective repairs Complete accurate service reports, certificates, and documentation Liaise professionally with clients, site managers, and other engineers Ensure all work is completed safely and in compliance with health & safety regulations Participate in an on-call rota where required Manage tools, equipment, and company vehicle responsibly Systems Experience (Desirable) Conventional and addressable fire alarm systems Knowledge of manufacturers such as Gent, Apollo, Advanced, Notifier, C-Tec, or similar Basic understanding of emergency lighting (advantageous but not essential) Required Skills & Experience Proven experience as a Fire Alarm Engineer (installation and servicing) Good knowledge of fire alarm regulations and British Standards Strong fault-finding and problem-solving skills Ability to work independently and manage workload effectively Good communication and customer service skills IT literacy for reporting and documentation Qualifications Relevant fire alarm qualifications (e.g. FIA units) preferred ECS/CSCS card (or ability to obtain) Full UK driving licence (essential) What We Offer Competitive salary with overtime opportunities Company vehicle, fuel card, phone, and tools Ongoing training and professional development Supportive team environment Opportunity for career progression
Mar 25, 2026
Full time
Role Overview We are seeking an experienced and motivated Fire Alarm Engineer to carry out the installation, servicing, maintenance, and fault-finding of fire alarm systems across the North West. The role involves working across commercial, industrial, and residential sites, ensuring all systems comply with current regulations and standards. Key Responsibilities Install and maintain fire alarm systems in line with BS 5839 standards Service and maintain existing fire alarm systems Diagnose faults and carry out effective repairs Complete accurate service reports, certificates, and documentation Liaise professionally with clients, site managers, and other engineers Ensure all work is completed safely and in compliance with health & safety regulations Participate in an on-call rota where required Manage tools, equipment, and company vehicle responsibly Systems Experience (Desirable) Conventional and addressable fire alarm systems Knowledge of manufacturers such as Gent, Apollo, Advanced, Notifier, C-Tec, or similar Basic understanding of emergency lighting (advantageous but not essential) Required Skills & Experience Proven experience as a Fire Alarm Engineer (installation and servicing) Good knowledge of fire alarm regulations and British Standards Strong fault-finding and problem-solving skills Ability to work independently and manage workload effectively Good communication and customer service skills IT literacy for reporting and documentation Qualifications Relevant fire alarm qualifications (e.g. FIA units) preferred ECS/CSCS card (or ability to obtain) Full UK driving licence (essential) What We Offer Competitive salary with overtime opportunities Company vehicle, fuel card, phone, and tools Ongoing training and professional development Supportive team environment Opportunity for career progression
Delivery Manager - Plymouth Rate: 500/day (Inside IR35, Via Umbrella) Location: Plymouth We are seeking an experienced Delivery Manager to join our Development Delivery Team in Plymouth. The role involves overseeing multiple housing development projects, ensuring they are delivered on time, on budget, and to the required quality and regulatory standards. Key Responsibilities: Contribute to the successful delivery of housing developments in line with business objectives. Read and assess drawings, verifying accuracy against installation. Work collaboratively with site teams and internal colleagues. Maintain project records and trackers, updating internal systems as required. Ensure compliance with health & safety requirements, holding at least SMSTS . Liaise with contractors, consultants, and stakeholders to support project delivery. Manage handovers and ensure completed units meet quality and snag-free standards. Experience & Skills: Strong building technology knowledge and familiarity with building regulations . Ability to read and interpret technical drawings. Site experience preferred; former site managers with strong IT skills considered. Proficient in IT systems, trackers, and reporting. Excellent communication and team-working skills. Minimum HNC or degree in construction, development, or related field. Proven experience in housing development or commercial property projects. This role offers a great opportunity to contribute to the delivery of high-quality new homes while working in a supportive, collaborative environment. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks to ensure you can access the site as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Mar 25, 2026
Contractor
Delivery Manager - Plymouth Rate: 500/day (Inside IR35, Via Umbrella) Location: Plymouth We are seeking an experienced Delivery Manager to join our Development Delivery Team in Plymouth. The role involves overseeing multiple housing development projects, ensuring they are delivered on time, on budget, and to the required quality and regulatory standards. Key Responsibilities: Contribute to the successful delivery of housing developments in line with business objectives. Read and assess drawings, verifying accuracy against installation. Work collaboratively with site teams and internal colleagues. Maintain project records and trackers, updating internal systems as required. Ensure compliance with health & safety requirements, holding at least SMSTS . Liaise with contractors, consultants, and stakeholders to support project delivery. Manage handovers and ensure completed units meet quality and snag-free standards. Experience & Skills: Strong building technology knowledge and familiarity with building regulations . Ability to read and interpret technical drawings. Site experience preferred; former site managers with strong IT skills considered. Proficient in IT systems, trackers, and reporting. Excellent communication and team-working skills. Minimum HNC or degree in construction, development, or related field. Proven experience in housing development or commercial property projects. This role offers a great opportunity to contribute to the delivery of high-quality new homes while working in a supportive, collaborative environment. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks to ensure you can access the site as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
About the Company Our client is a leading, fully integrated design and build organisation delivering high-quality infrastructure projects across the UK water sector. Combining strong engineering expertise with extensive construction experience, they have built a reputation for delivering innovative and sustainable solutions. About the Role As a Principal Civil Engineer, you will play a key role in delivering major water and wastewater projects from feasibility through to construction and commissioning. You will be responsible for shaping civil engineering solutions, ensuring designs are efficient, compliant, and fully integrated throughout all project phases. Key Responsibilities Lead the design, planning, and delivery of civil engineering solutions across projects Provide technical guidance and ensure all designs meet relevant standards and legislation Collaborate closely with commercial, operational, and construction teams to deliver practical and safe solutions Build strong client relationships and promote a collaborative, one-team approach Manage interfaces between civil and other engineering disciplines Review and check technical documentation across multiple projects Identify and implement improvements in design processes, including sustainable and digital solutions Conduct site visits to ensure buildability and integration with existing systems Mentor and support the development of junior engineers within the team Requirements Degree in Civil Engineering or a related discipline Chartered Engineer (CEng) status with a relevant institution (essential) Minimum 10 years of experience in civil engineering, including hydraulic and concrete structure design Proven ability to manage multiple projects and meet deadlines Strong understanding of design, quality, and safety standards Excellent communication and stakeholder management skills Willingness to travel to project sites within the region Experience in sustainable design and green building practices Proficiency in civil engineering software and tools Knowledge of regulatory requirements within the water and wastewater sector Experience in temporary works design Additional Information Candidates should be based in the UK or within commuting distance Please note: Our client is currently unable to provide visa sponsorship for this role. Applicants must have the right to work in the UK without requiring sponsorship. If you are looking to contribute to impactful infrastructure projects in a collaborative and forward-thinking environment, we encourage you to apply.
Mar 25, 2026
Full time
About the Company Our client is a leading, fully integrated design and build organisation delivering high-quality infrastructure projects across the UK water sector. Combining strong engineering expertise with extensive construction experience, they have built a reputation for delivering innovative and sustainable solutions. About the Role As a Principal Civil Engineer, you will play a key role in delivering major water and wastewater projects from feasibility through to construction and commissioning. You will be responsible for shaping civil engineering solutions, ensuring designs are efficient, compliant, and fully integrated throughout all project phases. Key Responsibilities Lead the design, planning, and delivery of civil engineering solutions across projects Provide technical guidance and ensure all designs meet relevant standards and legislation Collaborate closely with commercial, operational, and construction teams to deliver practical and safe solutions Build strong client relationships and promote a collaborative, one-team approach Manage interfaces between civil and other engineering disciplines Review and check technical documentation across multiple projects Identify and implement improvements in design processes, including sustainable and digital solutions Conduct site visits to ensure buildability and integration with existing systems Mentor and support the development of junior engineers within the team Requirements Degree in Civil Engineering or a related discipline Chartered Engineer (CEng) status with a relevant institution (essential) Minimum 10 years of experience in civil engineering, including hydraulic and concrete structure design Proven ability to manage multiple projects and meet deadlines Strong understanding of design, quality, and safety standards Excellent communication and stakeholder management skills Willingness to travel to project sites within the region Experience in sustainable design and green building practices Proficiency in civil engineering software and tools Knowledge of regulatory requirements within the water and wastewater sector Experience in temporary works design Additional Information Candidates should be based in the UK or within commuting distance Please note: Our client is currently unable to provide visa sponsorship for this role. Applicants must have the right to work in the UK without requiring sponsorship. If you are looking to contribute to impactful infrastructure projects in a collaborative and forward-thinking environment, we encourage you to apply.
Grounds Maintenance Operative Bracknell 12-week contract - Temp to Permanent. 12.60 per hour PAYE Key Responsibilities Carry out a range of grounds maintenance tasks including grass cutting, hedge trimming, pruning, weed control and litter picking. Maintain communal outdoor areas to a high standard of cleanliness and presentation. Use a PDA or digital reporting system to record site visits and tasks completed. Follow all Health & Safety procedures, ensuring PPE is worn and safe working practices are maintained at all times. Attend and participate in toolbox talks, identifying training or safety needs where appropriate. Use appropriate mechanical and hand tools while following best horticultural practices. Ensure all equipment is cleaned, maintained and stored correctly, reporting any faults or defects to the supervisor. Carry out daily vehicle checks, ensuring vehicles are clean and oil and coolant levels are maintained, reporting any issues as required. Support other teams or trades when needed to ensure residents receive the best possible service. Undertake any other duties appropriate to the role. Experience & Skills Previous experience in grounds maintenance, landscaping, or a similar role, ideally within residential estates or property maintenance. Good understanding of practical horticulture and estate maintenance. Experience using grounds maintenance equipment such as mowers, strimmers and hedge cutters. PA1 and PA6a pesticide certification (or equivalent) for the safe use of pesticides. Full UK driving licence, preferably with towing capability. Strong communication skills and the ability to work well with colleagues and residents. A positive, professional attitude with the ability to adapt to different situations and customer needs. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Mar 25, 2026
Contractor
Grounds Maintenance Operative Bracknell 12-week contract - Temp to Permanent. 12.60 per hour PAYE Key Responsibilities Carry out a range of grounds maintenance tasks including grass cutting, hedge trimming, pruning, weed control and litter picking. Maintain communal outdoor areas to a high standard of cleanliness and presentation. Use a PDA or digital reporting system to record site visits and tasks completed. Follow all Health & Safety procedures, ensuring PPE is worn and safe working practices are maintained at all times. Attend and participate in toolbox talks, identifying training or safety needs where appropriate. Use appropriate mechanical and hand tools while following best horticultural practices. Ensure all equipment is cleaned, maintained and stored correctly, reporting any faults or defects to the supervisor. Carry out daily vehicle checks, ensuring vehicles are clean and oil and coolant levels are maintained, reporting any issues as required. Support other teams or trades when needed to ensure residents receive the best possible service. Undertake any other duties appropriate to the role. Experience & Skills Previous experience in grounds maintenance, landscaping, or a similar role, ideally within residential estates or property maintenance. Good understanding of practical horticulture and estate maintenance. Experience using grounds maintenance equipment such as mowers, strimmers and hedge cutters. PA1 and PA6a pesticide certification (or equivalent) for the safe use of pesticides. Full UK driving licence, preferably with towing capability. Strong communication skills and the ability to work well with colleagues and residents. A positive, professional attitude with the ability to adapt to different situations and customer needs. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
HSE Specialist required for a major Offshore Wind Developer based in the United Kingdom. Responsibilities: The HSE Advisor is responsible for providing independent, expert and professional advice and guidance to the project teams and its line management team on all health, safety and environmental issues. Support the project teams in and implementing high standards of proactive and continual improvement 'We Care' ethos, including initiatives in behavioural safety, wellbeing and sustainability to ensure a positive impact on the team members. Engage and develop relationships with operational teams to eliminate and reduce risks, develop HSE culture for the project teams and adherence to HSE standards and rules. Liaising with internal and external departments to ensure contractors are suitably selected, engaged and monitored for health, safety and environmental performance. Produce, review and update health, safety and environment related documentation required by the allocated offshore operations site and the operational team as directed by Head of HSE Offshore Operations UK & CE or required by the HSE function. Contribute towards and deliver on annual key performance indicators, goals and targets for the project teams and wider business. Carrying out regular workplace inspections on and offshore as required. Planning, running and recording feedback on emergency response drills. Requirements NEBOSH Certificate, ideally working towards a NEBOSH Diploma. IEMA Foundation Certificate in Environmental Management. Experience in developing, implementing and maintaining a certifiable HSE Management System. Ability to build effective working relationships with stakeholders at all levels through verbal and written communication including active listening skills. Experience as HSE professional in Offshore Wind including good knowledge of offshore wind O&M phase such as servicing, work packages reviews, lifting operations, environmental factors and Offshore logistics to name a few. Experience in behavioural safety techniques and delivering behavioural safety training would be desirable. The individual will be expected to regularly work on the Service Operations Vessel which will include offshore overnight stays. Good written and spoken English. Experience of renewable technologies and mechanical, electrical and technical systems, process engineering and advising on HSE technical matters relating to these. Driving licence.
Mar 25, 2026
Contractor
HSE Specialist required for a major Offshore Wind Developer based in the United Kingdom. Responsibilities: The HSE Advisor is responsible for providing independent, expert and professional advice and guidance to the project teams and its line management team on all health, safety and environmental issues. Support the project teams in and implementing high standards of proactive and continual improvement 'We Care' ethos, including initiatives in behavioural safety, wellbeing and sustainability to ensure a positive impact on the team members. Engage and develop relationships with operational teams to eliminate and reduce risks, develop HSE culture for the project teams and adherence to HSE standards and rules. Liaising with internal and external departments to ensure contractors are suitably selected, engaged and monitored for health, safety and environmental performance. Produce, review and update health, safety and environment related documentation required by the allocated offshore operations site and the operational team as directed by Head of HSE Offshore Operations UK & CE or required by the HSE function. Contribute towards and deliver on annual key performance indicators, goals and targets for the project teams and wider business. Carrying out regular workplace inspections on and offshore as required. Planning, running and recording feedback on emergency response drills. Requirements NEBOSH Certificate, ideally working towards a NEBOSH Diploma. IEMA Foundation Certificate in Environmental Management. Experience in developing, implementing and maintaining a certifiable HSE Management System. Ability to build effective working relationships with stakeholders at all levels through verbal and written communication including active listening skills. Experience as HSE professional in Offshore Wind including good knowledge of offshore wind O&M phase such as servicing, work packages reviews, lifting operations, environmental factors and Offshore logistics to name a few. Experience in behavioural safety techniques and delivering behavioural safety training would be desirable. The individual will be expected to regularly work on the Service Operations Vessel which will include offshore overnight stays. Good written and spoken English. Experience of renewable technologies and mechanical, electrical and technical systems, process engineering and advising on HSE technical matters relating to these. Driving licence.
This is an exciting opportunity for a Junior Engineer to join the engineering team within the FMCG industry. The role offers a chance to work on hands-on engineering projects while contributing to the success of a well-established organisation. Client Details The company operates within the FMCG sector and is a recognised name in its field. As a medium-sized organisation, they focus on delivering high-quality products and maintaining efficient operations. Description Support the maintenance and operation of engineering systems and equipment. Assist in troubleshooting and resolving technical issues to minimise downtime. Participate in routine inspections and preventative maintenance tasks. Collaborate with senior engineers to implement process improvements. Ensure compliance with health and safety regulations in all engineering activities. Maintain accurate records of maintenance and repair work. Contribute to engineering projects and provide feedback on performance enhancements. Work effectively within cross-functional teams to achieve departmental goals. Profile A successful Junior Engineer should have: A background in industry, machine operation, maintenance, etc. A strong understanding of engineering principles and maintenance practices. The ability to work collaboratively within a team environment. An eagerness to learn and adapt to new challenges in engineering and manufacturing. Job Offer 34,320 per annum. Great benefits as part of the employment package. Training and development The opportunity to work in a well-established organisation within the FMCG industry. A permanent role with prospects for professional growth and skill development. This is a fantastic opportunity for a Junior Engineer to make an impact. If you're ready to take the next step in your career within engineering and manufacturing, apply today!
Mar 25, 2026
Full time
This is an exciting opportunity for a Junior Engineer to join the engineering team within the FMCG industry. The role offers a chance to work on hands-on engineering projects while contributing to the success of a well-established organisation. Client Details The company operates within the FMCG sector and is a recognised name in its field. As a medium-sized organisation, they focus on delivering high-quality products and maintaining efficient operations. Description Support the maintenance and operation of engineering systems and equipment. Assist in troubleshooting and resolving technical issues to minimise downtime. Participate in routine inspections and preventative maintenance tasks. Collaborate with senior engineers to implement process improvements. Ensure compliance with health and safety regulations in all engineering activities. Maintain accurate records of maintenance and repair work. Contribute to engineering projects and provide feedback on performance enhancements. Work effectively within cross-functional teams to achieve departmental goals. Profile A successful Junior Engineer should have: A background in industry, machine operation, maintenance, etc. A strong understanding of engineering principles and maintenance practices. The ability to work collaboratively within a team environment. An eagerness to learn and adapt to new challenges in engineering and manufacturing. Job Offer 34,320 per annum. Great benefits as part of the employment package. Training and development The opportunity to work in a well-established organisation within the FMCG industry. A permanent role with prospects for professional growth and skill development. This is a fantastic opportunity for a Junior Engineer to make an impact. If you're ready to take the next step in your career within engineering and manufacturing, apply today!
We are looking for an experienced Project Solutions Delivery Manager to lead the successful delivery of complex customer solutions across our business. Operating within the Operations function, this role is responsible for ensuring technical solutions are designed, integrated, deployed, and handed over to customers in a controlled, high-quality, and commercially sound manner. You will lead the Solution Delivery function, providing oversight across scope, schedule, cost, risk, and quality for a portfolio of delivery programmes. Working closely with Business Development, Product, Engineering, and Operations teams, you will ensure projects are delivered consistently, predictably, and in line with customer expectations. This is a leadership role focused on delivery excellence, operational discipline, and building scalable delivery capability across the organisation. Key job requirements and responsibilities: Lead, manage, and develop the Solution Delivery function, including direct leadership of the TSDM team and cross-functional delivery teams across Product, Engineering, Field Service, Monitoring and Operations. Ensure consistent performance management, succession planning, and capability growth. Ensure alignment of Solution Delivery processes, systems and governance with the Group standards and business systems (TBS), embedding group requirements into local delivery practices where applicable. Undertake UK and international travel as required to support customer deployments, programme oversight, and stakeholder engagement. Delivery Governance and Standards Ensure highest standards of Health, Safety, Environment, Security, and Quality in solution delivery in line with applicable ISO and other relevant standards. Establish and own the Solution Delivery framework, tools, and methodology. Standardise project lifecycle governance from proposal through to handover. Programme and Project Oversight Provide oversight and assurance across all active delivery programmes. Manage prioritisation of projects, monitor dependencies, risks, and cross-project resource conflicts. Intervene where required to unblock, escalate, or stabilise projects. Support Business Development in the preparation of proposals Manage handover from Business Development into Delivery Handover from Delivery to Operations Financial and Commercial Control Support bid costing and commercial modelling. Ensure delivery teams operate within approved budgets. Monitor project performance to maintain accurate forecasting, cost tracking, and milestone billing controls, and provide regular reporting as required. Technical and Solution Oversight Maintain sufficient technical understanding across software, sensor integration, infrastructure deployment, and system integration domains. Ensure solutions are fit-for-purpose, scalable, secure, and compliant. Provide escalation support on complex technical delivery challenges. Ensure safe and compliant installation and deployment activity. Ensure team are able to operate, demonstrate, install, and configure FACE. Qualifications / skills and experience Essential Significant experience leading technical solution delivery of integrated hardware and software systems to external customers within a complex technology environment Strong financial and commercial management capability within programme and project delivery, including cost control, forecasting, and risk management. Strong stakeholder management skills, with the ability to operate confidently at executive and customer level. Eligibility to obtain and maintain UK security clearance. Full UK driving licence. Willingness and ability to undertake international travel as required. Must have the right to work in the UK. Experience operating in regulated, defence, critical infrastructure, or similarly controlled environments is desirable.
Mar 25, 2026
Full time
We are looking for an experienced Project Solutions Delivery Manager to lead the successful delivery of complex customer solutions across our business. Operating within the Operations function, this role is responsible for ensuring technical solutions are designed, integrated, deployed, and handed over to customers in a controlled, high-quality, and commercially sound manner. You will lead the Solution Delivery function, providing oversight across scope, schedule, cost, risk, and quality for a portfolio of delivery programmes. Working closely with Business Development, Product, Engineering, and Operations teams, you will ensure projects are delivered consistently, predictably, and in line with customer expectations. This is a leadership role focused on delivery excellence, operational discipline, and building scalable delivery capability across the organisation. Key job requirements and responsibilities: Lead, manage, and develop the Solution Delivery function, including direct leadership of the TSDM team and cross-functional delivery teams across Product, Engineering, Field Service, Monitoring and Operations. Ensure consistent performance management, succession planning, and capability growth. Ensure alignment of Solution Delivery processes, systems and governance with the Group standards and business systems (TBS), embedding group requirements into local delivery practices where applicable. Undertake UK and international travel as required to support customer deployments, programme oversight, and stakeholder engagement. Delivery Governance and Standards Ensure highest standards of Health, Safety, Environment, Security, and Quality in solution delivery in line with applicable ISO and other relevant standards. Establish and own the Solution Delivery framework, tools, and methodology. Standardise project lifecycle governance from proposal through to handover. Programme and Project Oversight Provide oversight and assurance across all active delivery programmes. Manage prioritisation of projects, monitor dependencies, risks, and cross-project resource conflicts. Intervene where required to unblock, escalate, or stabilise projects. Support Business Development in the preparation of proposals Manage handover from Business Development into Delivery Handover from Delivery to Operations Financial and Commercial Control Support bid costing and commercial modelling. Ensure delivery teams operate within approved budgets. Monitor project performance to maintain accurate forecasting, cost tracking, and milestone billing controls, and provide regular reporting as required. Technical and Solution Oversight Maintain sufficient technical understanding across software, sensor integration, infrastructure deployment, and system integration domains. Ensure solutions are fit-for-purpose, scalable, secure, and compliant. Provide escalation support on complex technical delivery challenges. Ensure safe and compliant installation and deployment activity. Ensure team are able to operate, demonstrate, install, and configure FACE. Qualifications / skills and experience Essential Significant experience leading technical solution delivery of integrated hardware and software systems to external customers within a complex technology environment Strong financial and commercial management capability within programme and project delivery, including cost control, forecasting, and risk management. Strong stakeholder management skills, with the ability to operate confidently at executive and customer level. Eligibility to obtain and maintain UK security clearance. Full UK driving licence. Willingness and ability to undertake international travel as required. Must have the right to work in the UK. Experience operating in regulated, defence, critical infrastructure, or similarly controlled environments is desirable.
We are looking for an experienced Project Solutions Delivery Manager to lead the successful delivery of complex customer solutions across our business. Operating within the Operations function, this role is responsible for ensuring technical solutions are designed, integrated, deployed, and handed over to customers in a controlled, high-quality, and commercially sound manner. You will lead the Solution Delivery function, providing oversight across scope, schedule, cost, risk, and quality for a portfolio of delivery programmes. Working closely with Business Development, Product, Engineering, and Operations teams, you will ensure projects are delivered consistently, predictably, and in line with customer expectations. This is a leadership role focused on delivery excellence, operational discipline, and building scalable delivery capability across the organisation. Key job requirements and responsibilities: Lead, manage, and develop the Solution Delivery function, including direct leadership of the TSDM team and cross-functional delivery teams across Product, Engineering, Field Service, Monitoring and Operations. Ensure consistent performance management, succession planning, and capability growth. Ensure alignment of Solution Delivery processes, systems and governance with the Group standards and business systems (TBS), embedding group requirements into local delivery practices where applicable. Undertake UK and international travel as required to support customer deployments, programme oversight, and stakeholder engagement. Delivery Governance and Standards Ensure highest standards of Health, Safety, Environment, Security, and Quality in solution delivery in line with applicable ISO and other relevant standards. Establish and own the Solution Delivery framework, tools, and methodology. Standardise project lifecycle governance from proposal through to handover. Programme and Project Oversight Provide oversight and assurance across all active delivery programmes. Manage prioritisation of projects, monitor dependencies, risks, and cross-project resource conflicts. Intervene where required to unblock, escalate, or stabilise projects. Support Business Development in the preparation of proposals Manage handover from Business Development into Delivery Handover from Delivery to Operations Financial and Commercial Control Support bid costing and commercial modelling. Ensure delivery teams operate within approved budgets. Monitor project performance to maintain accurate forecasting, cost tracking, and milestone billing controls, and provide regular reporting as required. Technical and Solution Oversight Maintain sufficient technical understanding across software, sensor integration, infrastructure deployment, and system integration domains. Ensure solutions are fit-for-purpose, scalable, secure, and compliant. Provide escalation support on complex technical delivery challenges. Ensure safe and compliant installation and deployment activity. Ensure team are able to operate, demonstrate, install, and configure FACE. Qualifications / skills and experience Essential Significant experience leading technical solution delivery of integrated hardware and software systems to external customers within a complex technology environment Strong financial and commercial management capability within programme and project delivery, including cost control, forecasting, and risk management. Strong stakeholder management skills, with the ability to operate confidently at executive and customer level. Eligibility to obtain and maintain UK security clearance. Full UK driving licence. Willingness and ability to undertake international travel as required. Must have the right to work in the UK. Experience operating in regulated, defence, critical infrastructure, or similarly controlled environments is desirable.
Mar 25, 2026
Full time
We are looking for an experienced Project Solutions Delivery Manager to lead the successful delivery of complex customer solutions across our business. Operating within the Operations function, this role is responsible for ensuring technical solutions are designed, integrated, deployed, and handed over to customers in a controlled, high-quality, and commercially sound manner. You will lead the Solution Delivery function, providing oversight across scope, schedule, cost, risk, and quality for a portfolio of delivery programmes. Working closely with Business Development, Product, Engineering, and Operations teams, you will ensure projects are delivered consistently, predictably, and in line with customer expectations. This is a leadership role focused on delivery excellence, operational discipline, and building scalable delivery capability across the organisation. Key job requirements and responsibilities: Lead, manage, and develop the Solution Delivery function, including direct leadership of the TSDM team and cross-functional delivery teams across Product, Engineering, Field Service, Monitoring and Operations. Ensure consistent performance management, succession planning, and capability growth. Ensure alignment of Solution Delivery processes, systems and governance with the Group standards and business systems (TBS), embedding group requirements into local delivery practices where applicable. Undertake UK and international travel as required to support customer deployments, programme oversight, and stakeholder engagement. Delivery Governance and Standards Ensure highest standards of Health, Safety, Environment, Security, and Quality in solution delivery in line with applicable ISO and other relevant standards. Establish and own the Solution Delivery framework, tools, and methodology. Standardise project lifecycle governance from proposal through to handover. Programme and Project Oversight Provide oversight and assurance across all active delivery programmes. Manage prioritisation of projects, monitor dependencies, risks, and cross-project resource conflicts. Intervene where required to unblock, escalate, or stabilise projects. Support Business Development in the preparation of proposals Manage handover from Business Development into Delivery Handover from Delivery to Operations Financial and Commercial Control Support bid costing and commercial modelling. Ensure delivery teams operate within approved budgets. Monitor project performance to maintain accurate forecasting, cost tracking, and milestone billing controls, and provide regular reporting as required. Technical and Solution Oversight Maintain sufficient technical understanding across software, sensor integration, infrastructure deployment, and system integration domains. Ensure solutions are fit-for-purpose, scalable, secure, and compliant. Provide escalation support on complex technical delivery challenges. Ensure safe and compliant installation and deployment activity. Ensure team are able to operate, demonstrate, install, and configure FACE. Qualifications / skills and experience Essential Significant experience leading technical solution delivery of integrated hardware and software systems to external customers within a complex technology environment Strong financial and commercial management capability within programme and project delivery, including cost control, forecasting, and risk management. Strong stakeholder management skills, with the ability to operate confidently at executive and customer level. Eligibility to obtain and maintain UK security clearance. Full UK driving licence. Willingness and ability to undertake international travel as required. Must have the right to work in the UK. Experience operating in regulated, defence, critical infrastructure, or similarly controlled environments is desirable.
Job Title: Sheet Metal Worker Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Manufacture and install high quality sheet metal components, including ventilation systems and internal fittings Interpret engineering drawings to measure, cut, shape and assemble materials using a range of hand and power tools Produce accurate, well finished work that meets required standards and quality expectations Apply practical problem solving skills to resolve issues during manufacturing and installation, ensuring correct fit and safe completion Work collaboratively within a skilled team to maintain a safe environment and deliver reliable installations that keep projects on track Essential skills: You will hold a recognised Modern Apprenticeship, Trade Papers, or SVQ/NVQ Level 3 qualification (or equivalent) In this role, you'll bring experience from construction, manufacturing, marine, or other practical engineering environments You'll be applying your understanding of SHE and COSHH requirements, following safe working practices and safety training Working with engineering drawings, you'll measure, cut, shape, and assemble components accurately and safely You can demonstrate solid attention to detail, using your craftsmanship skills to deliver accurate, high-quality work The Sheet Metal Worker Team: The team delivers upgrades, refurbishments, and new installations across secure BAE Systems sites, working in groups of 6-12. A qualified Sheet Metal Worker contributes to high quality HVAC and furniture manufacture, supported by SVQ3 Marine Engineering, NC/HNC Fabrication and Welding and post apprenticeship industrial experience. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 3rd April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 25, 2026
Full time
Job Title: Sheet Metal Worker Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Manufacture and install high quality sheet metal components, including ventilation systems and internal fittings Interpret engineering drawings to measure, cut, shape and assemble materials using a range of hand and power tools Produce accurate, well finished work that meets required standards and quality expectations Apply practical problem solving skills to resolve issues during manufacturing and installation, ensuring correct fit and safe completion Work collaboratively within a skilled team to maintain a safe environment and deliver reliable installations that keep projects on track Essential skills: You will hold a recognised Modern Apprenticeship, Trade Papers, or SVQ/NVQ Level 3 qualification (or equivalent) In this role, you'll bring experience from construction, manufacturing, marine, or other practical engineering environments You'll be applying your understanding of SHE and COSHH requirements, following safe working practices and safety training Working with engineering drawings, you'll measure, cut, shape, and assemble components accurately and safely You can demonstrate solid attention to detail, using your craftsmanship skills to deliver accurate, high-quality work The Sheet Metal Worker Team: The team delivers upgrades, refurbishments, and new installations across secure BAE Systems sites, working in groups of 6-12. A qualified Sheet Metal Worker contributes to high quality HVAC and furniture manufacture, supported by SVQ3 Marine Engineering, NC/HNC Fabrication and Welding and post apprenticeship industrial experience. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 3rd April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Quality Engineer (Manufacturing) £29,000 - £31,000 + Specialist Training + Progression + Monday to Fridays + Days + Excellent Company Benefits Ideally Located: Telford, Birmingham, Wolverhampton, Shrewsbury, Bridgnorth, Dudley, Cannock, Stafford, ETC Are you a Quality Engineer / Junior Quality Engineer with experience in a manufacturing environment, looking to take the next step of your career at a company who pride themselves on their employee development with excellent internal and external training opportunities. This is a fantastic opportunity to join an established company renowned for its employee retention, in a varied role where no two days are the same, with excellent opportunities for career progression. The company have established themselves as the go to supplier for companies all over the UK. They have a very strong emphasis on their employee development and offer excellent opportunities for further internal and external training. You will be responsible for supporting and improving the company's Quality Management System, root cause investigations, coordinating internal audits, and ensuring ongoing compliance with customer, ISO and accreditation standards. This role would suit a Quality Engineer / Junior Quality Engineer, looking to take the next step of their career at a company who will invest in your future through excellent training and progression opportunities. The Role: Aiding and improving QMS and safety standards Internal audits and root cause analysis Monday to Friday - Days - Flexible hours The Candidate: Experienced in a manufacturing environment Looking to develop career with excellent training opportunities Looking for a close-knit team with great progression routes Reference Number: BBBH 270649 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Dan Smith at Rise Technical Recruitment Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Mar 25, 2026
Full time
Quality Engineer (Manufacturing) £29,000 - £31,000 + Specialist Training + Progression + Monday to Fridays + Days + Excellent Company Benefits Ideally Located: Telford, Birmingham, Wolverhampton, Shrewsbury, Bridgnorth, Dudley, Cannock, Stafford, ETC Are you a Quality Engineer / Junior Quality Engineer with experience in a manufacturing environment, looking to take the next step of your career at a company who pride themselves on their employee development with excellent internal and external training opportunities. This is a fantastic opportunity to join an established company renowned for its employee retention, in a varied role where no two days are the same, with excellent opportunities for career progression. The company have established themselves as the go to supplier for companies all over the UK. They have a very strong emphasis on their employee development and offer excellent opportunities for further internal and external training. You will be responsible for supporting and improving the company's Quality Management System, root cause investigations, coordinating internal audits, and ensuring ongoing compliance with customer, ISO and accreditation standards. This role would suit a Quality Engineer / Junior Quality Engineer, looking to take the next step of their career at a company who will invest in your future through excellent training and progression opportunities. The Role: Aiding and improving QMS and safety standards Internal audits and root cause analysis Monday to Friday - Days - Flexible hours The Candidate: Experienced in a manufacturing environment Looking to develop career with excellent training opportunities Looking for a close-knit team with great progression routes Reference Number: BBBH 270649 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Dan Smith at Rise Technical Recruitment Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Job Title: Manufacturing Engineer Location: Scotstoun & Govan Salary: £40,808 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. Role Description: Drive collaboration and influence to optimise engineering definitions and output formats, aligning them with current and future capabilities as well as best practices, while embedding a Value Engineering, APQP, and PFMEA mindset across all applicable programmes. Apply Lean tools and techniques to effectively solve problems and enhance performance in product delivery throughout ship manufacture and integration, as well as within supporting business processes. Develop clear, robust, and visually accessible work instructions-detailing required tooling, equipment, and plant-to enable a highly skilled operations team to consistently deliver world-class products that are both verifiable and repeatable. Additionally, plan and define facilities, equipment, tooling, and processes to meet and continuously improve quality, cost, and schedule targets, ensuring that safety remains the highest priority in all activities. Core Duties: Understand and interpret requirements, specifications and engineering outputs, cost, quality and schedule drivers and their interactions Good interpersonal skills are essential: including facilitating, coaching, presenting and stakeholder management Project and task management skills in coordinating and delivering successful activities Understand Manufacturing / Production engineering processes and procedures with experience in Manuf Execution System, CADCAM, PLM Systems usage Professional knowledge of relevant Engineering & Manufacturing Engineering standards/practices (including Health & Safety regulations) Engineering or Manufacturing apprenticeship / HNC / HND/ Degree, or equivalent work experience in a Manufacturing Engineering / Production Engineering/ Technician role The Manufacturing Engineering team: Our Manufacturing Engineering Teams work closely with our Naval Ships Manufacturing Teams in the deployed General Manager Business Areas within Naval Ships at the Glasgow sites of Govan and Scotstoun. You are part of the larger Manufacturing Engineering Dept of 100 people within the larger Manufacturing Function. As an ME2 Manufacturing Engineer you will be working for a Principal Manufacturing Engineer. Predominantly working on tasks to increase our Capabilities that deliver the Type 26 Programme and further enable our highly skilled teams across T26, Canadian Surface Combatant and Hunter Class as well as Future Business opportunities to make BAE Systems even more capable and effective. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement: Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 6th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 25, 2026
Full time
Job Title: Manufacturing Engineer Location: Scotstoun & Govan Salary: £40,808 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. Role Description: Drive collaboration and influence to optimise engineering definitions and output formats, aligning them with current and future capabilities as well as best practices, while embedding a Value Engineering, APQP, and PFMEA mindset across all applicable programmes. Apply Lean tools and techniques to effectively solve problems and enhance performance in product delivery throughout ship manufacture and integration, as well as within supporting business processes. Develop clear, robust, and visually accessible work instructions-detailing required tooling, equipment, and plant-to enable a highly skilled operations team to consistently deliver world-class products that are both verifiable and repeatable. Additionally, plan and define facilities, equipment, tooling, and processes to meet and continuously improve quality, cost, and schedule targets, ensuring that safety remains the highest priority in all activities. Core Duties: Understand and interpret requirements, specifications and engineering outputs, cost, quality and schedule drivers and their interactions Good interpersonal skills are essential: including facilitating, coaching, presenting and stakeholder management Project and task management skills in coordinating and delivering successful activities Understand Manufacturing / Production engineering processes and procedures with experience in Manuf Execution System, CADCAM, PLM Systems usage Professional knowledge of relevant Engineering & Manufacturing Engineering standards/practices (including Health & Safety regulations) Engineering or Manufacturing apprenticeship / HNC / HND/ Degree, or equivalent work experience in a Manufacturing Engineering / Production Engineering/ Technician role The Manufacturing Engineering team: Our Manufacturing Engineering Teams work closely with our Naval Ships Manufacturing Teams in the deployed General Manager Business Areas within Naval Ships at the Glasgow sites of Govan and Scotstoun. You are part of the larger Manufacturing Engineering Dept of 100 people within the larger Manufacturing Function. As an ME2 Manufacturing Engineer you will be working for a Principal Manufacturing Engineer. Predominantly working on tasks to increase our Capabilities that deliver the Type 26 Programme and further enable our highly skilled teams across T26, Canadian Surface Combatant and Hunter Class as well as Future Business opportunities to make BAE Systems even more capable and effective. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement: Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 6th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 3rd April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 25, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 3rd April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 3rd April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 25, 2026
Full time
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 3rd April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior Radiation Physicist Location: Barrow-in-Furness - Hybrid 3 days minimum onsite. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: You will conduct radiological safety assessments and evaluate radiation damage risks to onboard electronics. Your role involves developing radiation detection systems and managing the systems engineering design of secondary shielding. Utilising point kernel and Monte Carlo calculations, you will support radiation transport modelling and provide technical guidance on design changes or defects to maintain safety standards. Additionally, you will develop ALARP justifications to support engineering decisions , ensuring all radiological risks are minimised to compliant and acceptable levels. Core duties: You'll hold a degree in Mathematics, Physics, Chemistry, Engineering, Nuclear Science, or a related field You'll possess demonstrable knowledge/experience of radiation physics, nuclear engineering, nuclear safety or similar You'll have knowledge/experience of Radiological safety assessments, ALARP justifications or similar You'll utilise your knowledge/experience of radiation transport methods (ATTILLA/MCBEND/MCNP etc .) The Radiation Physics & Shielding team: Our team designs and validates radiation shielding for the UK's nuclear submarine fleet across three major programmes. We handle shield design, build assessments, metrology, and safety studies, while developing novel detectors and electronics capability. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 7th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 25, 2026
Full time
Job Title: Senior Radiation Physicist Location: Barrow-in-Furness - Hybrid 3 days minimum onsite. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: You will conduct radiological safety assessments and evaluate radiation damage risks to onboard electronics. Your role involves developing radiation detection systems and managing the systems engineering design of secondary shielding. Utilising point kernel and Monte Carlo calculations, you will support radiation transport modelling and provide technical guidance on design changes or defects to maintain safety standards. Additionally, you will develop ALARP justifications to support engineering decisions , ensuring all radiological risks are minimised to compliant and acceptable levels. Core duties: You'll hold a degree in Mathematics, Physics, Chemistry, Engineering, Nuclear Science, or a related field You'll possess demonstrable knowledge/experience of radiation physics, nuclear engineering, nuclear safety or similar You'll have knowledge/experience of Radiological safety assessments, ALARP justifications or similar You'll utilise your knowledge/experience of radiation transport methods (ATTILLA/MCBEND/MCNP etc .) The Radiation Physics & Shielding team: Our team designs and validates radiation shielding for the UK's nuclear submarine fleet across three major programmes. We handle shield design, build assessments, metrology, and safety studies, while developing novel detectors and electronics capability. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 7th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Specialist Estates Compliance Lead, £40k-£44k, Immediate Start, Armagh Your new company One of Northern Ireland's largest public sector authorities located in Co. Armagh is seeking an experienced Estates Compliance Manager to join on an interim basis for approximately nine months. This is a key assignment for a compliance professional who can quickly take ownership of statutory estates obligations and ensure the estate remains safe, legally compliant, and audit ready. Your new role This role will be on an initial interim contract for c.9 months reporting to the Estates Maintenance Manager. You will act as the organisation's technical lead for statutory compliance across a diverse estate, covering Legionella management, Asbestos control, Fixed Wire Testing, Fire Safety, Gas Safety, LOLER, PUWER, and wider planned preventative maintenance. The role requires someone confident stepping into a busy environment, stabilising compliance processes, and providing assurance to senior stakeholders. Key responsibilities:Oversee all statutory estates compliance activities, ensuring full alignment with current legislation and best practice.Manage programmes for Legionella monitoring, Asbestos surveys and management plans, Fixed Wire Testing, PAT testing, Fire Risk Assessments, Gas Safety inspections, and other mandatory checks.Maintain accurate compliance records, certificates, and audit trails, ensuring documentation is complete and accessible.Manage and monitor external contractors, ensuring high quality delivery and value for money.Review and strengthen policies, procedures, and safe systems of work.Provide expert advice to operational teams and senior leaders on compliance risks and mitigation.Lead internal audits, produce clear reports, and drive corrective actions. What you'll need to succeed To be eligible for this position, you must have:A third level qualification (i.e. HNC/HND, Level 4, Degree) in a relevant discipline/subject such as Electrical Engineering, Mechanical Engineering or Building Services.Strong knowledge of statutory estates compliance within a complex or multi site environment. Experience leading compliance programmes and managing external contractors.Relevant qualifications such as IOSH/NEBOSH, BOHS P402, or Legionella Responsible Person training.Excellent organisational skills and the ability to interpret and apply legislation confidently.A proactive, solutions focused approach and the ability to work independently at pace. What you'll get in return This is an excellent opportunity to gain experience working in a public sector organisation where you will be given the chance to work on a wide range of maintenance and refurbishment projects of varying values.This is a temporary post to cover a vacant position.£40,000 - £44,000 pro rata37 hours per week, Monday to Friday35 days annual leave including stat days. What you need to do now If you're interested in this role, contact Michael Dickson on or click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
Mar 25, 2026
Seasonal
Specialist Estates Compliance Lead, £40k-£44k, Immediate Start, Armagh Your new company One of Northern Ireland's largest public sector authorities located in Co. Armagh is seeking an experienced Estates Compliance Manager to join on an interim basis for approximately nine months. This is a key assignment for a compliance professional who can quickly take ownership of statutory estates obligations and ensure the estate remains safe, legally compliant, and audit ready. Your new role This role will be on an initial interim contract for c.9 months reporting to the Estates Maintenance Manager. You will act as the organisation's technical lead for statutory compliance across a diverse estate, covering Legionella management, Asbestos control, Fixed Wire Testing, Fire Safety, Gas Safety, LOLER, PUWER, and wider planned preventative maintenance. The role requires someone confident stepping into a busy environment, stabilising compliance processes, and providing assurance to senior stakeholders. Key responsibilities:Oversee all statutory estates compliance activities, ensuring full alignment with current legislation and best practice.Manage programmes for Legionella monitoring, Asbestos surveys and management plans, Fixed Wire Testing, PAT testing, Fire Risk Assessments, Gas Safety inspections, and other mandatory checks.Maintain accurate compliance records, certificates, and audit trails, ensuring documentation is complete and accessible.Manage and monitor external contractors, ensuring high quality delivery and value for money.Review and strengthen policies, procedures, and safe systems of work.Provide expert advice to operational teams and senior leaders on compliance risks and mitigation.Lead internal audits, produce clear reports, and drive corrective actions. What you'll need to succeed To be eligible for this position, you must have:A third level qualification (i.e. HNC/HND, Level 4, Degree) in a relevant discipline/subject such as Electrical Engineering, Mechanical Engineering or Building Services.Strong knowledge of statutory estates compliance within a complex or multi site environment. Experience leading compliance programmes and managing external contractors.Relevant qualifications such as IOSH/NEBOSH, BOHS P402, or Legionella Responsible Person training.Excellent organisational skills and the ability to interpret and apply legislation confidently.A proactive, solutions focused approach and the ability to work independently at pace. What you'll get in return This is an excellent opportunity to gain experience working in a public sector organisation where you will be given the chance to work on a wide range of maintenance and refurbishment projects of varying values.This is a temporary post to cover a vacant position.£40,000 - £44,000 pro rata37 hours per week, Monday to Friday35 days annual leave including stat days. What you need to do now If you're interested in this role, contact Michael Dickson on or click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
Join Our Team as an Electrical Engineer based in Nottingham, Nottinghamshire, United Kingdom Salary: £37,011 to £37,011 Annum Hours: Full Time, Permanent Why Work With Us? A career at Davenham Switchgear offers far more, including the combination of the stability and resources of being a brand of Legrand, with the close-knit, agile team we've built at Davenham. As well as exciting opportunities to work on cutting-edge switchgear which is powering data centres for some of the biggest tech companies in the world. We're proud of the continued success of our Dublin operation over the last 40 years and we are excited to be expanding into the UK at our new state-of-the-art Nottingham site. Benefits of joining our team 4 day week 20 days holidays On site parking Paid lunch break Over time at x 1.5 Christmas shutdown On site Health plan after probation Death in service EAP The Electrical Engineer role: In this role, you will be responsible for assembling and manufacturing electrical switchgear systems in line with detailed schematics. You will interpret 3-phase electrical drawings and CAD-generated diagrams with accuracy, ensuring that each component meets our high-quality standards. The Electrical Engineer role also involves maintaining and operating a variety of tools and equipment, as well as modifying and repairing automated electronic systems as needed. You'll play a key part in supporting the upkeep of workshop equipment and ensuring overall efficiency. Working closely with your colleagues, you'll contribute to meeting production targets while strictly adhering to health and safety procedures and helping to maintain a clean, organised, and safe work environment. What you'll need to join us as an Electrical Engineer : - 17th / 18th Edition Wiring Regulations certification - JIB/ECS Gold Card- Proven experience in low-voltage switchgear manufacturing- Skilled in using hand and power tools- Ability to read and work from technical and CAD-based drawings- Excellent communication and problem-solving skills- Self-motivated, detail-oriented, and able to work under pressure- Team player with good time management and multitasking ability If you're an experienced Electrical Engineer looking to work with a forward-thinking, people-focused business, we'd love to hear from you. Note: We reserve the right to amend this job description in line with business needs. All changes will be communicated accordingly. No agencies please.
Mar 25, 2026
Full time
Join Our Team as an Electrical Engineer based in Nottingham, Nottinghamshire, United Kingdom Salary: £37,011 to £37,011 Annum Hours: Full Time, Permanent Why Work With Us? A career at Davenham Switchgear offers far more, including the combination of the stability and resources of being a brand of Legrand, with the close-knit, agile team we've built at Davenham. As well as exciting opportunities to work on cutting-edge switchgear which is powering data centres for some of the biggest tech companies in the world. We're proud of the continued success of our Dublin operation over the last 40 years and we are excited to be expanding into the UK at our new state-of-the-art Nottingham site. Benefits of joining our team 4 day week 20 days holidays On site parking Paid lunch break Over time at x 1.5 Christmas shutdown On site Health plan after probation Death in service EAP The Electrical Engineer role: In this role, you will be responsible for assembling and manufacturing electrical switchgear systems in line with detailed schematics. You will interpret 3-phase electrical drawings and CAD-generated diagrams with accuracy, ensuring that each component meets our high-quality standards. The Electrical Engineer role also involves maintaining and operating a variety of tools and equipment, as well as modifying and repairing automated electronic systems as needed. You'll play a key part in supporting the upkeep of workshop equipment and ensuring overall efficiency. Working closely with your colleagues, you'll contribute to meeting production targets while strictly adhering to health and safety procedures and helping to maintain a clean, organised, and safe work environment. What you'll need to join us as an Electrical Engineer : - 17th / 18th Edition Wiring Regulations certification - JIB/ECS Gold Card- Proven experience in low-voltage switchgear manufacturing- Skilled in using hand and power tools- Ability to read and work from technical and CAD-based drawings- Excellent communication and problem-solving skills- Self-motivated, detail-oriented, and able to work under pressure- Team player with good time management and multitasking ability If you're an experienced Electrical Engineer looking to work with a forward-thinking, people-focused business, we'd love to hear from you. Note: We reserve the right to amend this job description in line with business needs. All changes will be communicated accordingly. No agencies please.
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 3rd April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 25, 2026
Full time
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 3rd April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior Manufacturing Engineer Location: Scotstoun & Govan Salary: £44,196 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. Role Description: Collaborate with strong influence to optimise engineering definitions and output formats, ensuring alignment with current and future capabilities and best practice, while embedding a Value Engineering, APQP, and PFMEA mindset across applicable programmes. Lead and develop the technical contributions of colleagues, motivating team members through positive, open, and honest communication. Define and approve facilities, equipment, tooling, and processes, and where appropriate, review and approve the work of team members. Apply Lean tools and techniques to solve problems and improve performance in product delivery across ship manufacture and integration, as well as within supporting business processes. Create clear, robust, and visual work instructions-including the specification of tooling, equipment, and plant-to enable a highly skilled operations team to deliver world-class products that are both verifiable and repeatable. Plan and define facilities, equipment, tooling, and processes to achieve and continuously improve quality, cost, and schedule targets, ensuring safety remains the highest priority. Agree, prioritise, schedule, and plan activities effectively to meet project and programme requirements. Core Duties : Proven experience of usage of Manufacturing / Production engineering processes and procedures with experience in Manuf Execution System, CADCAM, PLM, NC Programming, Tooling, Quality Engineering, Industrial Eng and Continuous Improvement, to a level where you can coach others in best practice adoption / benefits Good interpersonal skills are essential: including facilitating, coaching, presenting and stakeholder management where you will lead the change task Effective articulation and interpretation of requirements, specifications and engineering outputs, from an impact to cost, quality and schedule drivers Project and task management skills in coordinating and delivering successful activities where you will be viewed as the lead with knowledge of relevant Engineering & Manufacturing Engineering standards/practices (including Health & Safety regulations) Engineering or Manufacturing apprenticeship / HNC / HND/ Degree, or equivalent work experience in a Manufacturing Engineering / Production Engineering/ Technician role The Manufacturing Engineering team : Our Manufacturing Engineering Teams work closely with our Naval Ships Manufacturing Teams in the deployed General Manager Business Areas within Naval Ships at the Glasgow sites of Govan and Scotstoun. You are part of the larger Manufacturing Engineering Dept of 100 people within the larger Manufacturing Function. As a Senior Manufacturing Engineer (ME3) you will have significant involvement in key Manufacturing Engineering projects. You will use your knowledge and experience to guarantee delivery of Manufacturing Engineering outputs into Manufacturing & Operations that ensure design intent can be met. The role holder will advise, coach and lead other team members as part of their daily responsibilities as well as being responsible for influencing vessel design, optimising production processes, methods, facilities, equipment and tooling to drive improvement to achieve and exceed performance in safety, quality and cost targets. You will be working for a Principal Manufacturing Engineer. Predominantly working on tasks to increase our Capabilities that deliver the Type 26 Programme and further enable our highly skilled teams across T26, Canadian Surface Combatant and Hunter Class as well as Future Business opportunities to make BAE Systems even more capable and effective. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement: Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 6th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 25, 2026
Full time
Job Title: Senior Manufacturing Engineer Location: Scotstoun & Govan Salary: £44,196 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow - shaping a safer future, for all of us. Role Description: Collaborate with strong influence to optimise engineering definitions and output formats, ensuring alignment with current and future capabilities and best practice, while embedding a Value Engineering, APQP, and PFMEA mindset across applicable programmes. Lead and develop the technical contributions of colleagues, motivating team members through positive, open, and honest communication. Define and approve facilities, equipment, tooling, and processes, and where appropriate, review and approve the work of team members. Apply Lean tools and techniques to solve problems and improve performance in product delivery across ship manufacture and integration, as well as within supporting business processes. Create clear, robust, and visual work instructions-including the specification of tooling, equipment, and plant-to enable a highly skilled operations team to deliver world-class products that are both verifiable and repeatable. Plan and define facilities, equipment, tooling, and processes to achieve and continuously improve quality, cost, and schedule targets, ensuring safety remains the highest priority. Agree, prioritise, schedule, and plan activities effectively to meet project and programme requirements. Core Duties : Proven experience of usage of Manufacturing / Production engineering processes and procedures with experience in Manuf Execution System, CADCAM, PLM, NC Programming, Tooling, Quality Engineering, Industrial Eng and Continuous Improvement, to a level where you can coach others in best practice adoption / benefits Good interpersonal skills are essential: including facilitating, coaching, presenting and stakeholder management where you will lead the change task Effective articulation and interpretation of requirements, specifications and engineering outputs, from an impact to cost, quality and schedule drivers Project and task management skills in coordinating and delivering successful activities where you will be viewed as the lead with knowledge of relevant Engineering & Manufacturing Engineering standards/practices (including Health & Safety regulations) Engineering or Manufacturing apprenticeship / HNC / HND/ Degree, or equivalent work experience in a Manufacturing Engineering / Production Engineering/ Technician role The Manufacturing Engineering team : Our Manufacturing Engineering Teams work closely with our Naval Ships Manufacturing Teams in the deployed General Manager Business Areas within Naval Ships at the Glasgow sites of Govan and Scotstoun. You are part of the larger Manufacturing Engineering Dept of 100 people within the larger Manufacturing Function. As a Senior Manufacturing Engineer (ME3) you will have significant involvement in key Manufacturing Engineering projects. You will use your knowledge and experience to guarantee delivery of Manufacturing Engineering outputs into Manufacturing & Operations that ensure design intent can be met. The role holder will advise, coach and lead other team members as part of their daily responsibilities as well as being responsible for influencing vessel design, optimising production processes, methods, facilities, equipment and tooling to drive improvement to achieve and exceed performance in safety, quality and cost targets. You will be working for a Principal Manufacturing Engineer. Predominantly working on tasks to increase our Capabilities that deliver the Type 26 Programme and further enable our highly skilled teams across T26, Canadian Surface Combatant and Hunter Class as well as Future Business opportunities to make BAE Systems even more capable and effective. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work - this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family - support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from all candidates and give full, fair and open consideration to everyone. If you require any reasonable adjustments during the recruitment process, please contact our recruitment team to discuss any further support you may need. Connect with us at Security Statement: Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 6th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 3rd April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 25, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 3rd April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
