I'm partnering with a long-established UK engineering company in the power systems sector to appoint a Technical Director specialising in high-voltage (HV) and extra-high-voltage (EHV) substation testing and commissioning . This is a senior leadership position acting as the technical authority across grid infrastructure projects , combining strategic oversight with deep, hands-on expertise. You'll play a pivotal role in shaping engineering standards, leading commissioning activities, and ensuring the successful delivery of complex AIS and GIS substation projects across transmission and distribution (T&D) networks. Key responsibilities: Technical Governance & Strategy Define and implement engineering strategies, protection philosophies , and commissioning procedures Ensure alignment with international standards and UK utility requirements (e.g. National Grid, SSE, Scottish Power) Act as the ultimate technical authority across HV/EHV projects Project Oversight Provide leadership from FEED (Front End Engineering Design) through detailed design, construction, and final commissioning Oversee technical delivery across the full project lifecycle within transmission and distribution networks Site & Commissioning Support Lead and support complex testing and commissioning activities on HV/EHV substations Resolve critical site issues, technical queries, and design deviations Provide expert input on AIS (Air Insulated Switchgear) and GIS (Gas Insulated Switchgear) systems Quality & Safety Assurance Ensure all Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) meet stringent quality, safety, and environmental standards Champion a "safety in design" and commissioning culture across all projects Leadership & Mentorship Mentor and develop engineering teams, including commissioning engineers and design staff Act as a subject matter expert in client and stakeholder engagements Drive continuous improvement in technical delivery and engineering excellence Requirements: Bachelor's degree in Electrical Engineering (or equivalent experience) Extensive experience in HV/EHV substation design, testing, and commissioning within T&D environments Deep knowledge of: Protection & Control (P&C) systems Primary plant (transformers, switchgear, CTs/VTs) Secondary systems and substation automation Strong experience with AIS and GIS substations Proven ability to develop test procedures , analyse protection relay settings , and lead commissioning teams on major infrastructure projects Demonstrated leadership experience in senior or principal engineering roles Desirable: Chartered Engineer (CEng) status or equivalent Experience working with National Grid, SSE, Scottish Power , or similar utilities Familiarity with IEC standards and modern substation automation protocols (e.g. IEC 61850) Track record of leading large-scale or multi-site commissioning programmes What's on offer: Executive-level technical leadership role within a specialist engineering business Opportunity to shape and influence delivery of critical UK energy infrastructure High-impact role combining strategy, leadership, and hands-on engineering Flexible working with site exposure across major grid projects Competitive salary and benefits package The salary is 80,000 to 100,000 (flex on this) plus car allowance and an annual bonus.
Apr 22, 2026
Full time
I'm partnering with a long-established UK engineering company in the power systems sector to appoint a Technical Director specialising in high-voltage (HV) and extra-high-voltage (EHV) substation testing and commissioning . This is a senior leadership position acting as the technical authority across grid infrastructure projects , combining strategic oversight with deep, hands-on expertise. You'll play a pivotal role in shaping engineering standards, leading commissioning activities, and ensuring the successful delivery of complex AIS and GIS substation projects across transmission and distribution (T&D) networks. Key responsibilities: Technical Governance & Strategy Define and implement engineering strategies, protection philosophies , and commissioning procedures Ensure alignment with international standards and UK utility requirements (e.g. National Grid, SSE, Scottish Power) Act as the ultimate technical authority across HV/EHV projects Project Oversight Provide leadership from FEED (Front End Engineering Design) through detailed design, construction, and final commissioning Oversee technical delivery across the full project lifecycle within transmission and distribution networks Site & Commissioning Support Lead and support complex testing and commissioning activities on HV/EHV substations Resolve critical site issues, technical queries, and design deviations Provide expert input on AIS (Air Insulated Switchgear) and GIS (Gas Insulated Switchgear) systems Quality & Safety Assurance Ensure all Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) meet stringent quality, safety, and environmental standards Champion a "safety in design" and commissioning culture across all projects Leadership & Mentorship Mentor and develop engineering teams, including commissioning engineers and design staff Act as a subject matter expert in client and stakeholder engagements Drive continuous improvement in technical delivery and engineering excellence Requirements: Bachelor's degree in Electrical Engineering (or equivalent experience) Extensive experience in HV/EHV substation design, testing, and commissioning within T&D environments Deep knowledge of: Protection & Control (P&C) systems Primary plant (transformers, switchgear, CTs/VTs) Secondary systems and substation automation Strong experience with AIS and GIS substations Proven ability to develop test procedures , analyse protection relay settings , and lead commissioning teams on major infrastructure projects Demonstrated leadership experience in senior or principal engineering roles Desirable: Chartered Engineer (CEng) status or equivalent Experience working with National Grid, SSE, Scottish Power , or similar utilities Familiarity with IEC standards and modern substation automation protocols (e.g. IEC 61850) Track record of leading large-scale or multi-site commissioning programmes What's on offer: Executive-level technical leadership role within a specialist engineering business Opportunity to shape and influence delivery of critical UK energy infrastructure High-impact role combining strategy, leadership, and hands-on engineering Flexible working with site exposure across major grid projects Competitive salary and benefits package The salary is 80,000 to 100,000 (flex on this) plus car allowance and an annual bonus.
Job Title: Principal Engineer - Product Safety Location: Barrow-in-Furness, Filton or Broad Oak - Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll take a leading position in developing and managing Product Safety across complex engineering projects. You will work within a Systems Engineering framework to ensure safety is embedded throughout the project lifecycle, influencing design, build, and delivery decisions . You'll lead hazard identification and risk assessment activities, support the development of robust Safety Cases, and provide guidance to both senior stakeholders and junior team members. You will play a key role in ensuring safety standards are met, risks are effectively managed , and safety justifications are clear, evidence-based, and compliant. Core duties: Develop, implement and maintain the Project Safety Management System Produce and manage Safety Management Plans and Justification Plans Lead hazard identification and risk assessment activities (e.g. FMEA, HAZOP, FTA, STPA) Support the development and delivery of Safety Cases across the project lifecycle Conduct peer reviews, verification, and assurance of safety documentation Provide oversight and guidance to junior team members Interpret technical data and translate it into clear, robust safety arguments Engage with stakeholders across engineering, manufacturing, and project teams Essential skills STEM degree or equivalent qualification Experience with safety analysis techniques (e.g. FMEA, HAZOP, FTA) Experience developing Safety Cases and supporting documentation Experience working within a Project Safety Management System Understanding of Systems Engineering standards in a safety context The Safety & Environmental Team: The team plays a critical role in ensuring product safety across major programmes. As a Principal Engineer, you will lead the development and maintenance of Safety Management Systems and Safety Cases, while supporting the SSNA programme. You will also help resolve complex cross-disciplinary challenges and guide others in delivering high-quality safety outcomes. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. A diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must achieve at least Baseline Personnel Security Standard, with some roles requiring higher levels of National Security Vetting. Why BAE Systems? Here you'll build a career with purpose and real impact. With opportunities for lifelong learning and meaningful work, you'll be supported to grow and succeed. You'll be recognised for your contribution and benefit from a range of rewards supporting your financial, personal, and professional wellbeing. Closing Date: 4th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, please submit your application as early as possible.
Apr 22, 2026
Full time
Job Title: Principal Engineer - Product Safety Location: Barrow-in-Furness, Filton or Broad Oak - Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll take a leading position in developing and managing Product Safety across complex engineering projects. You will work within a Systems Engineering framework to ensure safety is embedded throughout the project lifecycle, influencing design, build, and delivery decisions . You'll lead hazard identification and risk assessment activities, support the development of robust Safety Cases, and provide guidance to both senior stakeholders and junior team members. You will play a key role in ensuring safety standards are met, risks are effectively managed , and safety justifications are clear, evidence-based, and compliant. Core duties: Develop, implement and maintain the Project Safety Management System Produce and manage Safety Management Plans and Justification Plans Lead hazard identification and risk assessment activities (e.g. FMEA, HAZOP, FTA, STPA) Support the development and delivery of Safety Cases across the project lifecycle Conduct peer reviews, verification, and assurance of safety documentation Provide oversight and guidance to junior team members Interpret technical data and translate it into clear, robust safety arguments Engage with stakeholders across engineering, manufacturing, and project teams Essential skills STEM degree or equivalent qualification Experience with safety analysis techniques (e.g. FMEA, HAZOP, FTA) Experience developing Safety Cases and supporting documentation Experience working within a Project Safety Management System Understanding of Systems Engineering standards in a safety context The Safety & Environmental Team: The team plays a critical role in ensuring product safety across major programmes. As a Principal Engineer, you will lead the development and maintenance of Safety Management Systems and Safety Cases, while supporting the SSNA programme. You will also help resolve complex cross-disciplinary challenges and guide others in delivering high-quality safety outcomes. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. A diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must achieve at least Baseline Personnel Security Standard, with some roles requiring higher levels of National Security Vetting. Why BAE Systems? Here you'll build a career with purpose and real impact. With opportunities for lifelong learning and meaningful work, you'll be supported to grow and succeed. You'll be recognised for your contribution and benefit from a range of rewards supporting your financial, personal, and professional wellbeing. Closing Date: 4th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, please submit your application as early as possible.
Job Title: Principal Engineer - Product Safety Location: Barrow-in-Furness, Filton or Broad Oak - Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll take a leading position in developing and managing Product Safety across complex engineering projects. You will work within a Systems Engineering framework to ensure safety is embedded throughout the project lifecycle, influencing design, build, and delivery decisions . You'll lead hazard identification and risk assessment activities, support the development of robust Safety Cases, and provide guidance to both senior stakeholders and junior team members. You will play a key role in ensuring safety standards are met, risks are effectively managed , and safety justifications are clear, evidence-based, and compliant. Core duties: Develop, implement and maintain the Project Safety Management System Produce and manage Safety Management Plans and Justification Plans Lead hazard identification and risk assessment activities (e.g. FMEA, HAZOP, FTA, STPA) Support the development and delivery of Safety Cases across the project lifecycle Conduct peer reviews, verification, and assurance of safety documentation Provide oversight and guidance to junior team members Interpret technical data and translate it into clear, robust safety arguments Engage with stakeholders across engineering, manufacturing, and project teams Essential skills STEM degree or equivalent qualification Experience with safety analysis techniques (e.g. FMEA, HAZOP, FTA) Experience developing Safety Cases and supporting documentation Experience working within a Project Safety Management System Understanding of Systems Engineering standards in a safety context The Safety & Environmental Team: The team plays a critical role in ensuring product safety across major programmes. As a Principal Engineer, you will lead the development and maintenance of Safety Management Systems and Safety Cases, while supporting the SSNA programme. You will also help resolve complex cross-disciplinary challenges and guide others in delivering high-quality safety outcomes. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. A diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must achieve at least Baseline Personnel Security Standard, with some roles requiring higher levels of National Security Vetting. Why BAE Systems? Here you'll build a career with purpose and real impact. With opportunities for lifelong learning and meaningful work, you'll be supported to grow and succeed. You'll be recognised for your contribution and benefit from a range of rewards supporting your financial, personal, and professional wellbeing. Closing Date: 4th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, please submit your application as early as possible.
Apr 22, 2026
Full time
Job Title: Principal Engineer - Product Safety Location: Barrow-in-Furness, Filton or Broad Oak - Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll take a leading position in developing and managing Product Safety across complex engineering projects. You will work within a Systems Engineering framework to ensure safety is embedded throughout the project lifecycle, influencing design, build, and delivery decisions . You'll lead hazard identification and risk assessment activities, support the development of robust Safety Cases, and provide guidance to both senior stakeholders and junior team members. You will play a key role in ensuring safety standards are met, risks are effectively managed , and safety justifications are clear, evidence-based, and compliant. Core duties: Develop, implement and maintain the Project Safety Management System Produce and manage Safety Management Plans and Justification Plans Lead hazard identification and risk assessment activities (e.g. FMEA, HAZOP, FTA, STPA) Support the development and delivery of Safety Cases across the project lifecycle Conduct peer reviews, verification, and assurance of safety documentation Provide oversight and guidance to junior team members Interpret technical data and translate it into clear, robust safety arguments Engage with stakeholders across engineering, manufacturing, and project teams Essential skills STEM degree or equivalent qualification Experience with safety analysis techniques (e.g. FMEA, HAZOP, FTA) Experience developing Safety Cases and supporting documentation Experience working within a Project Safety Management System Understanding of Systems Engineering standards in a safety context The Safety & Environmental Team: The team plays a critical role in ensuring product safety across major programmes. As a Principal Engineer, you will lead the development and maintenance of Safety Management Systems and Safety Cases, while supporting the SSNA programme. You will also help resolve complex cross-disciplinary challenges and guide others in delivering high-quality safety outcomes. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. A diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must achieve at least Baseline Personnel Security Standard, with some roles requiring higher levels of National Security Vetting. Why BAE Systems? Here you'll build a career with purpose and real impact. With opportunities for lifelong learning and meaningful work, you'll be supported to grow and succeed. You'll be recognised for your contribution and benefit from a range of rewards supporting your financial, personal, and professional wellbeing. Closing Date: 4th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, please submit your application as early as possible.
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Apr 22, 2026
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Apr 22, 2026
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Apr 22, 2026
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Apr 22, 2026
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Important: All applicants must be able to obtain Security Clearance and must hold sole British Nationality as a minimum. Working: The role offers flexible & hybrid working. It would be beneficial to be on-site 5 days a week - We are seeking a Multi Skilled Maintenance Operator to join our one of our major defence clients to service Equipment. This will involve working on Process and Plant equipment, Nitrogen Systems, Environmental Chambers, high- and low-pressure systems and ESD Protective areas and equipment. You will work on extremely varied, interesting and challenging. - Role Responsibilities: Working in a multi discipline team to support the Operations team. Ensure that both factory and proprietary test and measuring equipment is maintained in line with current procedures. Carry out repair tasks in accordance with departmental processes and procedures. Generating clear and comprehensive maintenance records for traceability purposes. The work is challenging, rewarding and extremely varied. Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ - not required if you have achieved a L3 apprenticeship standard Skill and Experience; Experience in the maintenance and repair of plant and process equipment. Be competent in following manufacturer's instructions on preventative and routine maintenance requirements. Proactive attitude to daily tasking and be able to deal with multiple issues, tasks and priorities concurrently. Demonstrated knowledge of defect investigations and fault diagnosis. Good attitude to quality and safety. Desirable Experience; Experience in the Defence or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. Familiarity with vacuum systems, temperature cycling systems and dew-point testing would be an advantage. A good understanding of SAP would be desirable. Desirable: 18th Edition IET Wiring Regulations, IET Code of Practice for In-Service inspection & Testing of Electrical Equipment. Experience of operating low- and high-pressure air processing and test facilities (including bottled gas systems) beneficial. Experience of working on Environmental Chambers an advantage. Experience in an electronics manufacturing environment an advantage - - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Benefits; Bonus : Up to 2,500 (based on performance). Pension : Up to 14% total contribution. Parental Leave : Enhanced parental, maternity, and shared parental leave. Flexi Leave : Up to 15 additional days. Facilities : On-site perks like subsidised meals and free parking. Training and Development : Excellent opportunities for career progression and skill development Company Details; The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. Glassdoor review. "Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion. Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. For full information, please get in touch
Apr 22, 2026
Full time
Important: All applicants must be able to obtain Security Clearance and must hold sole British Nationality as a minimum. Working: The role offers flexible & hybrid working. It would be beneficial to be on-site 5 days a week - We are seeking a Multi Skilled Maintenance Operator to join our one of our major defence clients to service Equipment. This will involve working on Process and Plant equipment, Nitrogen Systems, Environmental Chambers, high- and low-pressure systems and ESD Protective areas and equipment. You will work on extremely varied, interesting and challenging. - Role Responsibilities: Working in a multi discipline team to support the Operations team. Ensure that both factory and proprietary test and measuring equipment is maintained in line with current procedures. Carry out repair tasks in accordance with departmental processes and procedures. Generating clear and comprehensive maintenance records for traceability purposes. The work is challenging, rewarding and extremely varied. Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ - not required if you have achieved a L3 apprenticeship standard Skill and Experience; Experience in the maintenance and repair of plant and process equipment. Be competent in following manufacturer's instructions on preventative and routine maintenance requirements. Proactive attitude to daily tasking and be able to deal with multiple issues, tasks and priorities concurrently. Demonstrated knowledge of defect investigations and fault diagnosis. Good attitude to quality and safety. Desirable Experience; Experience in the Defence or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. Familiarity with vacuum systems, temperature cycling systems and dew-point testing would be an advantage. A good understanding of SAP would be desirable. Desirable: 18th Edition IET Wiring Regulations, IET Code of Practice for In-Service inspection & Testing of Electrical Equipment. Experience of operating low- and high-pressure air processing and test facilities (including bottled gas systems) beneficial. Experience of working on Environmental Chambers an advantage. Experience in an electronics manufacturing environment an advantage - - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Benefits; Bonus : Up to 2,500 (based on performance). Pension : Up to 14% total contribution. Parental Leave : Enhanced parental, maternity, and shared parental leave. Flexi Leave : Up to 15 additional days. Facilities : On-site perks like subsidised meals and free parking. Training and Development : Excellent opportunities for career progression and skill development Company Details; The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. Glassdoor review. "Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion. Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. For full information, please get in touch
Job Title: Structural Team Lead Location: Hybrid, Central Belt preferred, but flexible Salary: Competitive Job Type: Full Time, Permanent About us: We are a team of enthusiastic and collaborative planners, designers, environmental consultants, engineers and health & safety professionals. Our client base includes public and private sectors. We have grown significantly over the last few years and now employ 200 individuals across the UK. Teamwork and a people-first culture are at the heart of everything we do and we wish to engage an enthusiastic professional to join our team. Please note that the company does not offer sponsorship and therefore candidates must have the legal right to live and work in the UK to be considered for this role. Overview of the role: The Company is offering an exciting opportunity for a talented Structural Engineer to step into a leadership role and drive our continued growth across the UK. As Structural Team Lead, you will guide a highly skilled engineering team and deliver innovative projects in sectors such as Energy, Manufacturing, and Distilling. With offices nationwide, we embrace hybrid and remote working to support the diverse needs of our staff. We specialise in designing structures for high-hazard industrial environments, including blast resistance, toxic hazards, and thermal hazard requirements. This role requires a Design Leader / Project Manager with exceptional managerial ability, strong interpersonal skills, and a proven track record in delivering complex building projects. Key Responsibilities: Lead and manage a team of highly competent structural engineers Oversee the delivery of multi-disciplinary structural projects from concept through detailed design Collaborate with internal and external disciplines during tender and bid preparation Partner with Directors, Business Development, and Marketing teams to grow opportunities with new and existing clients Build and maintain key client relationships Drive the development of project proposals and tender submissions Manage the design process for industrial buildings, ensuring compliance with current codes and standards Meet clients to define scopes of work and develop tailored proposals Take responsibility for commercial management of deliverables Oversee programme, resourcing, and quality compliance Mentor and support the development of junior staff About you Proven experience in managing and delivering structural engineering projects Background in industrial environments such as oil & gas, petrochemical, energy, manufacturing, or defence (beneficial) Strong understanding of all stages of the design and construction process; familiarity with RIBA stages advantageous Commercial delivery experience, including management of third-party suppliers Broad knowledge of building-related disciplines (Architecture, Civil & Structural, Building Services, Planning, Fire Engineering, etc.) Working knowledge of CDM 2015 Regulations Confidence in client-facing roles, including project scoping and relationship management Line management experience preferred Full UK driving licence with flexibility to attend client sites as required Benefits: Health Cash Plan Hybrid & Flexible Working Competitive Salary & Annual Review Sponsored Company Social Events Salary sacrifice schemes, eg, EV, cycle to work, holiday purchase 33 days annual leave Income Protection Enhanced Maternity and Paternity policies To Apply: Please click on the APPLY button to send your CV and Cover Letter for this role. Please summarise what you can bring to the role and your salary expectation. Only those invited to interview will receive a response Candidates with experience of:, Structural Engineering Manager, Associate Structural Engineer, Principal Structural Engineer, Structural Design Manager, Chartered Structural Engineer, MIStructE, MICE, Principal Engineer (Civil & Structural), Industrial Structural Engineer, Structural Project Manager, Lead Building Structures Engineer, RIBA Design Lead, CDM 2015 Specialist, Senior Structural Design Engineer, Infrastructure Associate, Industrial Building Design Lead may also be considered for this role.
Apr 22, 2026
Full time
Job Title: Structural Team Lead Location: Hybrid, Central Belt preferred, but flexible Salary: Competitive Job Type: Full Time, Permanent About us: We are a team of enthusiastic and collaborative planners, designers, environmental consultants, engineers and health & safety professionals. Our client base includes public and private sectors. We have grown significantly over the last few years and now employ 200 individuals across the UK. Teamwork and a people-first culture are at the heart of everything we do and we wish to engage an enthusiastic professional to join our team. Please note that the company does not offer sponsorship and therefore candidates must have the legal right to live and work in the UK to be considered for this role. Overview of the role: The Company is offering an exciting opportunity for a talented Structural Engineer to step into a leadership role and drive our continued growth across the UK. As Structural Team Lead, you will guide a highly skilled engineering team and deliver innovative projects in sectors such as Energy, Manufacturing, and Distilling. With offices nationwide, we embrace hybrid and remote working to support the diverse needs of our staff. We specialise in designing structures for high-hazard industrial environments, including blast resistance, toxic hazards, and thermal hazard requirements. This role requires a Design Leader / Project Manager with exceptional managerial ability, strong interpersonal skills, and a proven track record in delivering complex building projects. Key Responsibilities: Lead and manage a team of highly competent structural engineers Oversee the delivery of multi-disciplinary structural projects from concept through detailed design Collaborate with internal and external disciplines during tender and bid preparation Partner with Directors, Business Development, and Marketing teams to grow opportunities with new and existing clients Build and maintain key client relationships Drive the development of project proposals and tender submissions Manage the design process for industrial buildings, ensuring compliance with current codes and standards Meet clients to define scopes of work and develop tailored proposals Take responsibility for commercial management of deliverables Oversee programme, resourcing, and quality compliance Mentor and support the development of junior staff About you Proven experience in managing and delivering structural engineering projects Background in industrial environments such as oil & gas, petrochemical, energy, manufacturing, or defence (beneficial) Strong understanding of all stages of the design and construction process; familiarity with RIBA stages advantageous Commercial delivery experience, including management of third-party suppliers Broad knowledge of building-related disciplines (Architecture, Civil & Structural, Building Services, Planning, Fire Engineering, etc.) Working knowledge of CDM 2015 Regulations Confidence in client-facing roles, including project scoping and relationship management Line management experience preferred Full UK driving licence with flexibility to attend client sites as required Benefits: Health Cash Plan Hybrid & Flexible Working Competitive Salary & Annual Review Sponsored Company Social Events Salary sacrifice schemes, eg, EV, cycle to work, holiday purchase 33 days annual leave Income Protection Enhanced Maternity and Paternity policies To Apply: Please click on the APPLY button to send your CV and Cover Letter for this role. Please summarise what you can bring to the role and your salary expectation. Only those invited to interview will receive a response Candidates with experience of:, Structural Engineering Manager, Associate Structural Engineer, Principal Structural Engineer, Structural Design Manager, Chartered Structural Engineer, MIStructE, MICE, Principal Engineer (Civil & Structural), Industrial Structural Engineer, Structural Project Manager, Lead Building Structures Engineer, RIBA Design Lead, CDM 2015 Specialist, Senior Structural Design Engineer, Infrastructure Associate, Industrial Building Design Lead may also be considered for this role.
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Apr 22, 2026
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Apr 22, 2026
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Apr 22, 2026
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
82289 - Senior Project Manager LPN DCD This Senior Project Manager LPN DCD will report to the Programme Delivery Manager and will work within Network Operations, Distribution Capital Delivery based in our London offices. You will be a permanent employee. You will attract a salary of 99,127 and a bonus of 3%. This role can also offer blended working after probationary period (6 months) - 3 days in the office and 2 remote Job Purpose: The role of the Senior Project Manager within the Distribution Capital Delivery team is for managing a geographical team. This team ensures the delivery of distribution projects as set out in the annual investment plan. Asset Management produces the annual investment plan. We require all programmes and projects to deliver safely, to quality, on budget, on time and to customer service standards. You will be to lead the LPN DCD team of Project Managers, Work Planners, and Project Support in delivering a portfolio of projects and programmes from creation to completion. Also, the Senior Project Manager is responsible for the commercial management of contractors used to deliver LPN Network Planning projects including those working together with Capital Programme. The Senior Project Manager will support the Programme Delivery Manager with regards to budgeting and cost provision for their team. You will manage their budgets and expenditures following current Financial Authorisation Limits (FAL) empowered by the company. You will have the variety of being both technically and commercially challenging. It carries the responsibility for managing functions such as safety and customer service for the Distribution Capital Delivery activity. Also, you will support Procurement and Contract Management. This includes the delivery of professional services and engineering contracts. You will also support Asset Management in developing delivery plans/strategies and budgets for future years. Furthermore, the role will support Network Operations in responding to system emergencies and providing daily assistance. The Senior Project Manager agrees and implements the project delivery strategy, allocating works to the project managers, and monitoring the performance of both LPN Network Ops delivery teams and contractors. You will forecast resource and material requirements, monitor overall portfolio/project costs and delivery, manage contractor performance, and provide regular reporting. Principal Accountabilities Ensure that you maintain a high standard of safety management throughout all responsibilities and that UK Power Networks defines parameters within which you maintain safety performance. Promote the Incident and Injury free philosophy. Lead a team to deliver projects from creation to completion to time, quality, cost, whilst maintaining the highest levels of safety and environmental management. Manage the coordination and performance of several Project Managers. Close liaison with the Network Operations Area Managers and Lead Engineers to ensure the maximum utilisation of staff will be an important aspect of this role. Provide technical and management leadership to the team of Project Managers across all project management disciplines. Ensure construction assurance through site safety audits on quality of work, technical competencies, adherence to specifications, compliance with testing and commissioning procedures and safety and environmental procedures. Ensure that the required project completion data is compliant with policy and submitted within specified timescales for processing. Produce an overall delivery strategy and ensure provision of project managers, direct/contract resources, materials and services to ensure that project programmes are maintained. Manage the commercial arrangements with contractors to ensure that contractual arrangements are met and that cost controls are in place. Work with the appointed contractor management team to ensure utilisation of contractor resource. Ensure escalation of related issues and contractor performance to the Programme Delivery Manager. Responsible for the continuous improvement in productivity of our direct resources and contractor partners. Must aim to remove any barriers preventing the efficient delivery of work in Distribution Capital Delivery and across all Directorates. Produce forecasts for overall cost, commitment, milestone progress, resources, materials, and contracts. These forecasts ensure you meet expenditure plans and source delivery of critical items and personnel promptly. Additionally, they ensure you align with UK Power Networks procedures. Work with partners such as Asset Management, Distribution Planning, Supply Chain, Network Operations, Procurement and Contract management to ensure that materials and delivery contracts are in place to deliver the programme. Lead the team in ensuring high levels of safety and customer focus. Support the Programme Delivery Manager in the ongoing development of the team to ensure delivery of the asset portfolio plan. Ensure continuous development of the Project delivery team's knowledge and skill base training & staff development. Ensure design and construction compliance with CDM. Perform daily management of contractors and conduct regular reviews with contractors of safety, forecasts, delivery, and costs. Ensure staff comply with Company procedures and complete work to the required standard. Management and resolution of customer complaints for both internal and contractor resources.
Apr 22, 2026
Full time
82289 - Senior Project Manager LPN DCD This Senior Project Manager LPN DCD will report to the Programme Delivery Manager and will work within Network Operations, Distribution Capital Delivery based in our London offices. You will be a permanent employee. You will attract a salary of 99,127 and a bonus of 3%. This role can also offer blended working after probationary period (6 months) - 3 days in the office and 2 remote Job Purpose: The role of the Senior Project Manager within the Distribution Capital Delivery team is for managing a geographical team. This team ensures the delivery of distribution projects as set out in the annual investment plan. Asset Management produces the annual investment plan. We require all programmes and projects to deliver safely, to quality, on budget, on time and to customer service standards. You will be to lead the LPN DCD team of Project Managers, Work Planners, and Project Support in delivering a portfolio of projects and programmes from creation to completion. Also, the Senior Project Manager is responsible for the commercial management of contractors used to deliver LPN Network Planning projects including those working together with Capital Programme. The Senior Project Manager will support the Programme Delivery Manager with regards to budgeting and cost provision for their team. You will manage their budgets and expenditures following current Financial Authorisation Limits (FAL) empowered by the company. You will have the variety of being both technically and commercially challenging. It carries the responsibility for managing functions such as safety and customer service for the Distribution Capital Delivery activity. Also, you will support Procurement and Contract Management. This includes the delivery of professional services and engineering contracts. You will also support Asset Management in developing delivery plans/strategies and budgets for future years. Furthermore, the role will support Network Operations in responding to system emergencies and providing daily assistance. The Senior Project Manager agrees and implements the project delivery strategy, allocating works to the project managers, and monitoring the performance of both LPN Network Ops delivery teams and contractors. You will forecast resource and material requirements, monitor overall portfolio/project costs and delivery, manage contractor performance, and provide regular reporting. Principal Accountabilities Ensure that you maintain a high standard of safety management throughout all responsibilities and that UK Power Networks defines parameters within which you maintain safety performance. Promote the Incident and Injury free philosophy. Lead a team to deliver projects from creation to completion to time, quality, cost, whilst maintaining the highest levels of safety and environmental management. Manage the coordination and performance of several Project Managers. Close liaison with the Network Operations Area Managers and Lead Engineers to ensure the maximum utilisation of staff will be an important aspect of this role. Provide technical and management leadership to the team of Project Managers across all project management disciplines. Ensure construction assurance through site safety audits on quality of work, technical competencies, adherence to specifications, compliance with testing and commissioning procedures and safety and environmental procedures. Ensure that the required project completion data is compliant with policy and submitted within specified timescales for processing. Produce an overall delivery strategy and ensure provision of project managers, direct/contract resources, materials and services to ensure that project programmes are maintained. Manage the commercial arrangements with contractors to ensure that contractual arrangements are met and that cost controls are in place. Work with the appointed contractor management team to ensure utilisation of contractor resource. Ensure escalation of related issues and contractor performance to the Programme Delivery Manager. Responsible for the continuous improvement in productivity of our direct resources and contractor partners. Must aim to remove any barriers preventing the efficient delivery of work in Distribution Capital Delivery and across all Directorates. Produce forecasts for overall cost, commitment, milestone progress, resources, materials, and contracts. These forecasts ensure you meet expenditure plans and source delivery of critical items and personnel promptly. Additionally, they ensure you align with UK Power Networks procedures. Work with partners such as Asset Management, Distribution Planning, Supply Chain, Network Operations, Procurement and Contract management to ensure that materials and delivery contracts are in place to deliver the programme. Lead the team in ensuring high levels of safety and customer focus. Support the Programme Delivery Manager in the ongoing development of the team to ensure delivery of the asset portfolio plan. Ensure continuous development of the Project delivery team's knowledge and skill base training & staff development. Ensure design and construction compliance with CDM. Perform daily management of contractors and conduct regular reviews with contractors of safety, forecasts, delivery, and costs. Ensure staff comply with Company procedures and complete work to the required standard. Management and resolution of customer complaints for both internal and contractor resources.
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Apr 21, 2026
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-In-Furness, hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the design and development of complex mechanical fluid systems that support critical submarine platform functions. You will define system requirements, develop high-integrity engineering solutions, and ensure designs meet demanding performance, safety, and environmental standards. You will work closely with engineering and project teams to support modelling and analysis , technical reviews, and supplier engagement, while contributing to cost estimation, risk assessment, and the resolution of technical challenges across the programme lifecycle. Core duties: Lead the end-to-end design and development of complex fluid systems, ensuring alignment with operational, safety, and environmental requirements Produce and review engineering deliverables including schematics, P&IDs, calculations, system descriptions, and 3D models Perform advanced system analyses (flow, pressure, thermal, transient) to validate performance under demanding conditions Select and assess mechanical equipment (e.g. pumps, compressors, valves, heat exchangers), ensuring compliance with environmental and operational requirements Review supplier documentation and ensure integration with system requirements including maintainability and accessibility Contribute to technical reviews, hazard studies, and verification and validation activities Support resolution of technical issues, design changes, and non-conformances across the engineering lifecycle Essential Skills: Strong mechanical engineering expertise in fluid systems, with knowledge of fluid dynamics, thermodynamics, and system modelling Experience leading the design and development of complex mechanical systems Ability to produce and review detailed engineering documentation (P&IDs, calculations, system descriptions, 3D models) Experience performing system analysis (flow, pressure, thermal, and transient behaviour) Knowledge of equipment selection and integration (e.g. pumps, valves, heat exchangers) within complex systems Experience in technical reviews, verification & validation, problem-solving, and working with suppliers; familiarity with tools such as FloMASTER, CFD, MATLAB or ANSYS desirable The Mechanical Engineering Discipline Team: This is an exciting opportunity to join the SSN-AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, acting as a technical specialist for critical compressible and incompressible fluid systems essential to submarine operations. You will take ownership of high-integrity mechanical designs in one of the most demanding engineering environments, working across multidisciplinary teams to develop complex system solutions, influence platform-level decisions and ensure designs meet strict safety, performance and environmental standards. This role offers the chance to contribute directly to one of the UK's most advanced defence programmes. Relocation support may be available for submarine roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Babcock Mission Critical Services España SA.
Warrington, Cheshire
Select how often (in days) to receive an alert: Principal Mechanical Engineer Location: Warrington, GB, WA3 6YD Reading, GB, RG14 2PZ Preston, GB, PR2 2YB Onsite or Hybrid: Job Title: Principal Mechanical Engineer Location: Flexible, UK + Hybrid Working Arrangement Compensation: Competitive Salary + Benefits Role Type: Full time / Permanent Role ID: SF66879 Drive Innovation in Defence Nuclear Engineering At Cavendish Nuclear we're working to create a safe and secure world, together, and if you join us, you can play your part as a Principal Mechanical Engineer at one of our key locations: Warrington (Cheshire) or Preston (Lancashire). The role As a Principal Mechanical Engineer, you'll have a role that's out of the ordinary. This role will contribute to a high-impact public sector Defence Nuclear infrastructure initiative focused on enhancing operational resilience and sustainability across critical systems. The project involves complex mechanical systems integration, requiring innovative engineering solutions within a multidisciplinary team. Day-to-day, you'll lead multidisciplinary engineering teams, oversee the delivery of complex technical solutions, and act as a key point of contact for customers, ensuring high standards of safety, quality, and performance while mentoring others and driving continuous improvement across projects. Lead and manage multidisciplinary engineering teams to deliver high-quality technical solutions aligned with customer requirements and project scope. Supervise and mentor engineers and technical specialists, ensuring effective performance, development, and adherence to engineering standards. Act as a key liaison with customers, fostering strong relationships and ensuring transparent communication on technical progress and delivery. Oversee the production, review, and approval of engineering outputs, including calculations, specifications, and reports, ensuring compliance with relevant codes and standards. Champion health, safety, and environmental standards across engineering activities, promoting a culture of best practice and continuous improvement. This role is full time, 37 hours per week provides hybrid working arrangements with 3 days in the office/onsite, at one of our key locations: Warrington (Cheshire) or Preston (Lancashire). Essential experience of the Principal Mechanical Engineer: Extensive experience leading multidisciplinary engineering teams and delivering complex technical projects within agreed scope, timeframes, and quality standards. Proven ability to supervise and mentor engineers and technical specialists, fostering professional development and ensuring high performance. Strong background in producing, reviewing, and approving detailed engineering outputs, including calculations, specifications, and technical reports. Demonstrated expertise in applying relevant procedures, codes, and standards to ensure compliance and technical integrity across engineering activities. Track record of effective customer engagement, including managing relationships, resolving technical issues, and supporting business development initiatives. Qualifications for the Principal Mechanical Engineer: Engineering degree (or equivalent qualification) in relevant engineering discipline, with significant demonstrable experience. Matched contribution pension scheme, with life assurance Access to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+ Employee share scheme Employee shopping savings portal Payment of Professional FeesReservists in the armed forces receive 10-days special paid leave Holiday Trading is a benefit that allows UK Cavendish employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement. This Window opens February through to March annually. 'Be Kind Day' enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity Excellent development opportunities and benefits package including an employee assistance programme supporting physical, mental and financial wellbeing. As a leader within the UK nuclear industry, Cavendish Nuclear, part of Babcock International Group, provides a comprehensive range of critical nuclear solutions in clean energy, defence and civil new build and decommissioning projects. Together, we're innovating to make nuclear safer, faster and cost-effective across the nuclear energy life cycle. Your career with us could take you anywhere within Babcock International Group - from Canada, the USA to Japan. Work with us to create a safe and secure world, together. We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please with the subject header 'Reasonable adjustments requirement'. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview.
Apr 21, 2026
Full time
Select how often (in days) to receive an alert: Principal Mechanical Engineer Location: Warrington, GB, WA3 6YD Reading, GB, RG14 2PZ Preston, GB, PR2 2YB Onsite or Hybrid: Job Title: Principal Mechanical Engineer Location: Flexible, UK + Hybrid Working Arrangement Compensation: Competitive Salary + Benefits Role Type: Full time / Permanent Role ID: SF66879 Drive Innovation in Defence Nuclear Engineering At Cavendish Nuclear we're working to create a safe and secure world, together, and if you join us, you can play your part as a Principal Mechanical Engineer at one of our key locations: Warrington (Cheshire) or Preston (Lancashire). The role As a Principal Mechanical Engineer, you'll have a role that's out of the ordinary. This role will contribute to a high-impact public sector Defence Nuclear infrastructure initiative focused on enhancing operational resilience and sustainability across critical systems. The project involves complex mechanical systems integration, requiring innovative engineering solutions within a multidisciplinary team. Day-to-day, you'll lead multidisciplinary engineering teams, oversee the delivery of complex technical solutions, and act as a key point of contact for customers, ensuring high standards of safety, quality, and performance while mentoring others and driving continuous improvement across projects. Lead and manage multidisciplinary engineering teams to deliver high-quality technical solutions aligned with customer requirements and project scope. Supervise and mentor engineers and technical specialists, ensuring effective performance, development, and adherence to engineering standards. Act as a key liaison with customers, fostering strong relationships and ensuring transparent communication on technical progress and delivery. Oversee the production, review, and approval of engineering outputs, including calculations, specifications, and reports, ensuring compliance with relevant codes and standards. Champion health, safety, and environmental standards across engineering activities, promoting a culture of best practice and continuous improvement. This role is full time, 37 hours per week provides hybrid working arrangements with 3 days in the office/onsite, at one of our key locations: Warrington (Cheshire) or Preston (Lancashire). Essential experience of the Principal Mechanical Engineer: Extensive experience leading multidisciplinary engineering teams and delivering complex technical projects within agreed scope, timeframes, and quality standards. Proven ability to supervise and mentor engineers and technical specialists, fostering professional development and ensuring high performance. Strong background in producing, reviewing, and approving detailed engineering outputs, including calculations, specifications, and technical reports. Demonstrated expertise in applying relevant procedures, codes, and standards to ensure compliance and technical integrity across engineering activities. Track record of effective customer engagement, including managing relationships, resolving technical issues, and supporting business development initiatives. Qualifications for the Principal Mechanical Engineer: Engineering degree (or equivalent qualification) in relevant engineering discipline, with significant demonstrable experience. Matched contribution pension scheme, with life assurance Access to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+ Employee share scheme Employee shopping savings portal Payment of Professional FeesReservists in the armed forces receive 10-days special paid leave Holiday Trading is a benefit that allows UK Cavendish employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement. This Window opens February through to March annually. 'Be Kind Day' enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity Excellent development opportunities and benefits package including an employee assistance programme supporting physical, mental and financial wellbeing. As a leader within the UK nuclear industry, Cavendish Nuclear, part of Babcock International Group, provides a comprehensive range of critical nuclear solutions in clean energy, defence and civil new build and decommissioning projects. Together, we're innovating to make nuclear safer, faster and cost-effective across the nuclear energy life cycle. Your career with us could take you anywhere within Babcock International Group - from Canada, the USA to Japan. Work with us to create a safe and secure world, together. We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please with the subject header 'Reasonable adjustments requirement'. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview.
Job Title: Principal Engineer - Product Safety Location: Barrow-in-Furness, Filton or Broad Oak - Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll take a leading position in developing and managing Product Safety across complex engineering projects. You will work within a Systems Engineering framework to ensure safety is embedded throughout the project lifecycle, influencing design, build, and delivery decisions . You'll lead hazard identification and risk assessment activities, support the development of robust Safety Cases, and provide guidance to both senior stakeholders and junior team members. You will play a key role in ensuring safety standards are met, risks are effectively managed , and safety justifications are clear, evidence-based, and compliant. Core duties: Develop, implement and maintain the Project Safety Management System Produce and manage Safety Management Plans and Justification Plans Lead hazard identification and risk assessment activities (e.g. FMEA, HAZOP, FTA, STPA) Support the development and delivery of Safety Cases across the project lifecycle Conduct peer reviews, verification, and assurance of safety documentation Provide oversight and guidance to junior team members Interpret technical data and translate it into clear, robust safety arguments Engage with stakeholders across engineering, manufacturing, and project teams Essential skills STEM degree or equivalent qualification Experience with safety analysis techniques (e.g. FMEA, HAZOP, FTA) Experience developing Safety Cases and supporting documentation Experience working within a Project Safety Management System Understanding of Systems Engineering standards in a safety context The Safety & Environmental Team: The team plays a critical role in ensuring product safety across major programmes. As a Principal Engineer, you will lead the development and maintenance of Safety Management Systems and Safety Cases, while supporting the SSNA programme. You will also help resolve complex cross-disciplinary challenges and guide others in delivering high-quality safety outcomes. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. A diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must achieve at least Baseline Personnel Security Standard, with some roles requiring higher levels of National Security Vetting. Why BAE Systems? Here you'll build a career with purpose and real impact. With opportunities for lifelong learning and meaningful work, you'll be supported to grow and succeed. You'll be recognised for your contribution and benefit from a range of rewards supporting your financial, personal, and professional wellbeing. Closing Date: 4th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, please submit your application as early as possible.
Apr 21, 2026
Full time
Job Title: Principal Engineer - Product Safety Location: Barrow-in-Furness, Filton or Broad Oak - Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll take a leading position in developing and managing Product Safety across complex engineering projects. You will work within a Systems Engineering framework to ensure safety is embedded throughout the project lifecycle, influencing design, build, and delivery decisions . You'll lead hazard identification and risk assessment activities, support the development of robust Safety Cases, and provide guidance to both senior stakeholders and junior team members. You will play a key role in ensuring safety standards are met, risks are effectively managed , and safety justifications are clear, evidence-based, and compliant. Core duties: Develop, implement and maintain the Project Safety Management System Produce and manage Safety Management Plans and Justification Plans Lead hazard identification and risk assessment activities (e.g. FMEA, HAZOP, FTA, STPA) Support the development and delivery of Safety Cases across the project lifecycle Conduct peer reviews, verification, and assurance of safety documentation Provide oversight and guidance to junior team members Interpret technical data and translate it into clear, robust safety arguments Engage with stakeholders across engineering, manufacturing, and project teams Essential skills STEM degree or equivalent qualification Experience with safety analysis techniques (e.g. FMEA, HAZOP, FTA) Experience developing Safety Cases and supporting documentation Experience working within a Project Safety Management System Understanding of Systems Engineering standards in a safety context The Safety & Environmental Team: The team plays a critical role in ensuring product safety across major programmes. As a Principal Engineer, you will lead the development and maintenance of Safety Management Systems and Safety Cases, while supporting the SSNA programme. You will also help resolve complex cross-disciplinary challenges and guide others in delivering high-quality safety outcomes. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. A diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must achieve at least Baseline Personnel Security Standard, with some roles requiring higher levels of National Security Vetting. Why BAE Systems? Here you'll build a career with purpose and real impact. With opportunities for lifelong learning and meaningful work, you'll be supported to grow and succeed. You'll be recognised for your contribution and benefit from a range of rewards supporting your financial, personal, and professional wellbeing. Closing Date: 4th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, please submit your application as early as possible.
Job Title: Principal Safety Engineer Location: Barrow-In-Furness, Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll provide technical leadership as a subject matter expert in safety engineering. You'll guide and mentor engineers, influencing design decisions and supporting the development of robust safety cases for complex nuclear submarine systems. You will analyse and assess major hazards including fires, explosions (including DSEAR), and steam release, applying structured safety engineering techniques to ensure compliance and design integrity. You'll also engage with regulators, MOD stakeholders, and internal teams to justify safety decisions and maintain high standards of assurance across the programme. Core duties: Provide technical leadership and expert guidance in safety engineering for complex systems Mentor and develop engineers, supporting capability growth and influencing engineering decisions Identify, assess, and mitigate hazards across nuclear submarine systems and related environments Develop, review, and maintain safety case documentation and structured safety arguments Apply hazard analysis techniques such as HAZOP, FMEA, Fault Tree Analysis , and Event Tree Analysis (desirable) Apply knowledge of DSEAR, fire risk assessment, and major hazard safety principles (desirable) Interface with regulators, MOD customers, and internal engineering and safety stakeholders Support safety justification through clear engineering judgement and structured evidence Essential Skills: Degree qualified in a STEM discipline or equivalent experience Strong understanding of safety engineering principles and practices Experience producing or contributing to safety case documentation in complex engineering environments Ability to apply structured hazard analysis techniques and engineering judgement Excellent communication skills for technical and stakeholder engagement The Safety & Environmental Team: This established and collaborative team provides exposure to a wide range of strategic and technical safety activities. You'll work alongside engineers from graduate to principal level, engaging with operational managers, department heads, and Health & Safety professionals. The role offers strong opportunities for professional development within a highly regulated engineering environment, with exposure to submarine programme safety challenges and broader defence safety initiatives . Relocation support packages are available for eligible roles. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 28th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Apr 21, 2026
Full time
Job Title: Principal Safety Engineer Location: Barrow-In-Furness, Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll provide technical leadership as a subject matter expert in safety engineering. You'll guide and mentor engineers, influencing design decisions and supporting the development of robust safety cases for complex nuclear submarine systems. You will analyse and assess major hazards including fires, explosions (including DSEAR), and steam release, applying structured safety engineering techniques to ensure compliance and design integrity. You'll also engage with regulators, MOD stakeholders, and internal teams to justify safety decisions and maintain high standards of assurance across the programme. Core duties: Provide technical leadership and expert guidance in safety engineering for complex systems Mentor and develop engineers, supporting capability growth and influencing engineering decisions Identify, assess, and mitigate hazards across nuclear submarine systems and related environments Develop, review, and maintain safety case documentation and structured safety arguments Apply hazard analysis techniques such as HAZOP, FMEA, Fault Tree Analysis , and Event Tree Analysis (desirable) Apply knowledge of DSEAR, fire risk assessment, and major hazard safety principles (desirable) Interface with regulators, MOD customers, and internal engineering and safety stakeholders Support safety justification through clear engineering judgement and structured evidence Essential Skills: Degree qualified in a STEM discipline or equivalent experience Strong understanding of safety engineering principles and practices Experience producing or contributing to safety case documentation in complex engineering environments Ability to apply structured hazard analysis techniques and engineering judgement Excellent communication skills for technical and stakeholder engagement The Safety & Environmental Team: This established and collaborative team provides exposure to a wide range of strategic and technical safety activities. You'll work alongside engineers from graduate to principal level, engaging with operational managers, department heads, and Health & Safety professionals. The role offers strong opportunities for professional development within a highly regulated engineering environment, with exposure to submarine programme safety challenges and broader defence safety initiatives . Relocation support packages are available for eligible roles. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 28th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Principal Safety Engineer Location: Barrow-In-Furness, Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll provide technical leadership as a subject matter expert in safety engineering. You'll guide and mentor engineers, influencing design decisions and supporting the development of robust safety cases for complex nuclear submarine systems. You will analyse and assess major hazards including fires, explosions (including DSEAR), and steam release, applying structured safety engineering techniques to ensure compliance and design integrity. You'll also engage with regulators, MOD stakeholders, and internal teams to justify safety decisions and maintain high standards of assurance across the programme. Core duties: Provide technical leadership and expert guidance in safety engineering for complex systems Mentor and develop engineers, supporting capability growth and influencing engineering decisions Identify, assess, and mitigate hazards across nuclear submarine systems and related environments Develop, review, and maintain safety case documentation and structured safety arguments Apply hazard analysis techniques such as HAZOP, FMEA, Fault Tree Analysis , and Event Tree Analysis (desirable) Apply knowledge of DSEAR, fire risk assessment, and major hazard safety principles (desirable) Interface with regulators, MOD customers, and internal engineering and safety stakeholders Support safety justification through clear engineering judgement and structured evidence Essential Skills: Degree qualified in a STEM discipline or equivalent experience Strong understanding of safety engineering principles and practices Experience producing or contributing to safety case documentation in complex engineering environments Ability to apply structured hazard analysis techniques and engineering judgement Excellent communication skills for technical and stakeholder engagement The Safety & Environmental Team: This established and collaborative team provides exposure to a wide range of strategic and technical safety activities. You'll work alongside engineers from graduate to principal level, engaging with operational managers, department heads, and Health & Safety professionals. The role offers strong opportunities for professional development within a highly regulated engineering environment, with exposure to submarine programme safety challenges and broader defence safety initiatives . Relocation support packages are available for eligible roles. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 28th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Apr 21, 2026
Full time
Job Title: Principal Safety Engineer Location: Barrow-In-Furness, Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll provide technical leadership as a subject matter expert in safety engineering. You'll guide and mentor engineers, influencing design decisions and supporting the development of robust safety cases for complex nuclear submarine systems. You will analyse and assess major hazards including fires, explosions (including DSEAR), and steam release, applying structured safety engineering techniques to ensure compliance and design integrity. You'll also engage with regulators, MOD stakeholders, and internal teams to justify safety decisions and maintain high standards of assurance across the programme. Core duties: Provide technical leadership and expert guidance in safety engineering for complex systems Mentor and develop engineers, supporting capability growth and influencing engineering decisions Identify, assess, and mitigate hazards across nuclear submarine systems and related environments Develop, review, and maintain safety case documentation and structured safety arguments Apply hazard analysis techniques such as HAZOP, FMEA, Fault Tree Analysis , and Event Tree Analysis (desirable) Apply knowledge of DSEAR, fire risk assessment, and major hazard safety principles (desirable) Interface with regulators, MOD customers, and internal engineering and safety stakeholders Support safety justification through clear engineering judgement and structured evidence Essential Skills: Degree qualified in a STEM discipline or equivalent experience Strong understanding of safety engineering principles and practices Experience producing or contributing to safety case documentation in complex engineering environments Ability to apply structured hazard analysis techniques and engineering judgement Excellent communication skills for technical and stakeholder engagement The Safety & Environmental Team: This established and collaborative team provides exposure to a wide range of strategic and technical safety activities. You'll work alongside engineers from graduate to principal level, engaging with operational managers, department heads, and Health & Safety professionals. The role offers strong opportunities for professional development within a highly regulated engineering environment, with exposure to submarine programme safety challenges and broader defence safety initiatives . Relocation support packages are available for eligible roles. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 28th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Principal Safety Engineer Location: Barrow-In-Furness, Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll provide technical leadership as a subject matter expert in safety engineering. You'll guide and mentor engineers, influencing design decisions and supporting the development of robust safety cases for complex nuclear submarine systems. You will analyse and assess major hazards including fires, explosions (including DSEAR), and steam release, applying structured safety engineering techniques to ensure compliance and design integrity. You'll also engage with regulators, MOD stakeholders, and internal teams to justify safety decisions and maintain high standards of assurance across the programme. Core duties: Provide technical leadership and expert guidance in safety engineering for complex systems Mentor and develop engineers, supporting capability growth and influencing engineering decisions Identify, assess, and mitigate hazards across nuclear submarine systems and related environments Develop, review, and maintain safety case documentation and structured safety arguments Apply hazard analysis techniques such as HAZOP, FMEA, Fault Tree Analysis , and Event Tree Analysis (desirable) Apply knowledge of DSEAR, fire risk assessment, and major hazard safety principles (desirable) Interface with regulators, MOD customers, and internal engineering and safety stakeholders Support safety justification through clear engineering judgement and structured evidence Essential Skills: Degree qualified in a STEM discipline or equivalent experience Strong understanding of safety engineering principles and practices Experience producing or contributing to safety case documentation in complex engineering environments Ability to apply structured hazard analysis techniques and engineering judgement Excellent communication skills for technical and stakeholder engagement The Safety & Environmental Team: This established and collaborative team provides exposure to a wide range of strategic and technical safety activities. You'll work alongside engineers from graduate to principal level, engaging with operational managers, department heads, and Health & Safety professionals. The role offers strong opportunities for professional development within a highly regulated engineering environment, with exposure to submarine programme safety challenges and broader defence safety initiatives . Relocation support packages are available for eligible roles. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 28th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Apr 21, 2026
Full time
Job Title: Principal Safety Engineer Location: Barrow-In-Furness, Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll provide technical leadership as a subject matter expert in safety engineering. You'll guide and mentor engineers, influencing design decisions and supporting the development of robust safety cases for complex nuclear submarine systems. You will analyse and assess major hazards including fires, explosions (including DSEAR), and steam release, applying structured safety engineering techniques to ensure compliance and design integrity. You'll also engage with regulators, MOD stakeholders, and internal teams to justify safety decisions and maintain high standards of assurance across the programme. Core duties: Provide technical leadership and expert guidance in safety engineering for complex systems Mentor and develop engineers, supporting capability growth and influencing engineering decisions Identify, assess, and mitigate hazards across nuclear submarine systems and related environments Develop, review, and maintain safety case documentation and structured safety arguments Apply hazard analysis techniques such as HAZOP, FMEA, Fault Tree Analysis , and Event Tree Analysis (desirable) Apply knowledge of DSEAR, fire risk assessment, and major hazard safety principles (desirable) Interface with regulators, MOD customers, and internal engineering and safety stakeholders Support safety justification through clear engineering judgement and structured evidence Essential Skills: Degree qualified in a STEM discipline or equivalent experience Strong understanding of safety engineering principles and practices Experience producing or contributing to safety case documentation in complex engineering environments Ability to apply structured hazard analysis techniques and engineering judgement Excellent communication skills for technical and stakeholder engagement The Safety & Environmental Team: This established and collaborative team provides exposure to a wide range of strategic and technical safety activities. You'll work alongside engineers from graduate to principal level, engaging with operational managers, department heads, and Health & Safety professionals. The role offers strong opportunities for professional development within a highly regulated engineering environment, with exposure to submarine programme safety challenges and broader defence safety initiatives . Relocation support packages are available for eligible roles. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 28th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Principal Safety Engineer Location: Barrow-In-Furness, Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll provide technical leadership as a subject matter expert in safety engineering. You'll guide and mentor engineers, influencing design decisions and supporting the development of robust safety cases for complex nuclear submarine systems. You will analyse and assess major hazards including fires, explosions (including DSEAR), and steam release, applying structured safety engineering techniques to ensure compliance and design integrity. You'll also engage with regulators, MOD stakeholders, and internal teams to justify safety decisions and maintain high standards of assurance across the programme. Core duties: Provide technical leadership and expert guidance in safety engineering for complex systems Mentor and develop engineers, supporting capability growth and influencing engineering decisions Identify, assess, and mitigate hazards across nuclear submarine systems and related environments Develop, review, and maintain safety case documentation and structured safety arguments Apply hazard analysis techniques such as HAZOP, FMEA, Fault Tree Analysis , and Event Tree Analysis (desirable) Apply knowledge of DSEAR, fire risk assessment, and major hazard safety principles (desirable) Interface with regulators, MOD customers, and internal engineering and safety stakeholders Support safety justification through clear engineering judgement and structured evidence Essential Skills: Degree qualified in a STEM discipline or equivalent experience Strong understanding of safety engineering principles and practices Experience producing or contributing to safety case documentation in complex engineering environments Ability to apply structured hazard analysis techniques and engineering judgement Excellent communication skills for technical and stakeholder engagement The Safety & Environmental Team: This established and collaborative team provides exposure to a wide range of strategic and technical safety activities. You'll work alongside engineers from graduate to principal level, engaging with operational managers, department heads, and Health & Safety professionals. The role offers strong opportunities for professional development within a highly regulated engineering environment, with exposure to submarine programme safety challenges and broader defence safety initiatives . Relocation support packages are available for eligible roles. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 28th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Apr 21, 2026
Full time
Job Title: Principal Safety Engineer Location: Barrow-In-Furness, Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll provide technical leadership as a subject matter expert in safety engineering. You'll guide and mentor engineers, influencing design decisions and supporting the development of robust safety cases for complex nuclear submarine systems. You will analyse and assess major hazards including fires, explosions (including DSEAR), and steam release, applying structured safety engineering techniques to ensure compliance and design integrity. You'll also engage with regulators, MOD stakeholders, and internal teams to justify safety decisions and maintain high standards of assurance across the programme. Core duties: Provide technical leadership and expert guidance in safety engineering for complex systems Mentor and develop engineers, supporting capability growth and influencing engineering decisions Identify, assess, and mitigate hazards across nuclear submarine systems and related environments Develop, review, and maintain safety case documentation and structured safety arguments Apply hazard analysis techniques such as HAZOP, FMEA, Fault Tree Analysis , and Event Tree Analysis (desirable) Apply knowledge of DSEAR, fire risk assessment, and major hazard safety principles (desirable) Interface with regulators, MOD customers, and internal engineering and safety stakeholders Support safety justification through clear engineering judgement and structured evidence Essential Skills: Degree qualified in a STEM discipline or equivalent experience Strong understanding of safety engineering principles and practices Experience producing or contributing to safety case documentation in complex engineering environments Ability to apply structured hazard analysis techniques and engineering judgement Excellent communication skills for technical and stakeholder engagement The Safety & Environmental Team: This established and collaborative team provides exposure to a wide range of strategic and technical safety activities. You'll work alongside engineers from graduate to principal level, engaging with operational managers, department heads, and Health & Safety professionals. The role offers strong opportunities for professional development within a highly regulated engineering environment, with exposure to submarine programme safety challenges and broader defence safety initiatives . Relocation support packages are available for eligible roles. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 28th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
