Job Title: Mobile Rail Operative - West London Location : West London Salary: DB Cargo UK offers a salary starting at 30,412 rising to 31,825 once competency is achieved. This is based on a 35 hours per week contract. Once you have completed training, you will move on to a shift/rota and will receive shift allowance of 3,936 in addition to your salary. Job Type: Full Time, Permanent. Here at DB Cargo UK we are recruiting a Mobile Operative in the West London area to join our operational groundstaff team. As a Mobile Operative at DB Cargo UK you will be on the go each day, out in all weathers preparing our trains, so they are safe to go out on the mainline fulfilling customer orders. If you are looking to start your career off in the rail industry or fancy a career change this could be the role for you! DB Cargo UK offer a 5 week in depth training course into the role to ensure you are ready to take on the role confidently and help us in our journey to shift freight from road to rail. DB Cargo UK offers a salary starting at 30,412.00 rising to 31,825.00 once competency is achieved. This is based on a 35 hours per week contract. Once you have completed training, you will move on to a shift/rota and will receive shift allowance of 3,936.00 in addition to your salary. What you will be doing? As a Mobile Operative you will be involved and responsible for train preparations - ensuring that all locomotives and wagons are fit to go out on the mainline, carrying out essential safety checks. Be involved in dispatching trains in a safe and efficient manner, liaising with our Drivers and Operations Supervisors. You will also directly contribute to our service delivery and have the opportunity to influence the service we offer to out customers. The role will cover a varied number of customer sites, DB Cargo UK sites along with infrastructure worksites as required. Please contact the Recruitment Team if you would like more information about the role and our recruitment process. We will send out our Groundstaff Candidate Pack to you. What are we looking for? We are looking for someone who is highly motivated and committed to learning. Extremely safety focused who can take directions from managers and adhere to our rules and regulations. Have a flexible approach to shift working, with experience in teamwork and lone working. Attention to detail, problem solving and communication are also key skills we will be looking for in the successful candidate. Previous rail experience is advantageous however not essential. Requirements for the role: Candidates must hold a valid manual driving license, Live within a 1-hour commute of the central hub location for the area, GCSE Maths & English - Grade C / 4 or above, Be committed to learning in a classroom-based environment through training. What matters to you? Here at DB Cargo, we offer range of benefits as part of your employment. These will include: Full training into the role with a 5-week training course 31 days annual leave in addition to 2 public holidays Defined Contribution pension scheme with generous employer contribution - up to 10% employer contribution Free on-site parking EV charging at selected sites Health Cash Plan Available Cycle to work Scheme Charge and Go Scheme Manager led recognition programme for employees who live our values Access to DB Learning world We are dedicated to your continuous professional development. Depending on your role we have specialist training programs, apprenticeships, development plans, courses and qualifications we can support you through. Access to our employee benefits portal where you can take advantage of discounts for a variety of shops and services as well as accessing our wellbeing content We take the health and wellbeing of all employees seriously and provide access to an Employee Assistance Programme. Please click APPLY to send your CV for this role. Candidates with experience of: Rail Operative, Track Operative, Rail Maintenance Operative, Mobile Track Operative, Rail Technician, Track Technician, Railway Maintenance Technician, Rail Infrastructure Operative, Permanent Way Operative (P-Way Operative), Rail Engineering Operative, On-Track Operative, Possession Support Operative, Rail Labourer, Multi-Skilled Rail Operative, and Rail Site Operative, may also be considered for this role.
Apr 16, 2026
Full time
Job Title: Mobile Rail Operative - West London Location : West London Salary: DB Cargo UK offers a salary starting at 30,412 rising to 31,825 once competency is achieved. This is based on a 35 hours per week contract. Once you have completed training, you will move on to a shift/rota and will receive shift allowance of 3,936 in addition to your salary. Job Type: Full Time, Permanent. Here at DB Cargo UK we are recruiting a Mobile Operative in the West London area to join our operational groundstaff team. As a Mobile Operative at DB Cargo UK you will be on the go each day, out in all weathers preparing our trains, so they are safe to go out on the mainline fulfilling customer orders. If you are looking to start your career off in the rail industry or fancy a career change this could be the role for you! DB Cargo UK offer a 5 week in depth training course into the role to ensure you are ready to take on the role confidently and help us in our journey to shift freight from road to rail. DB Cargo UK offers a salary starting at 30,412.00 rising to 31,825.00 once competency is achieved. This is based on a 35 hours per week contract. Once you have completed training, you will move on to a shift/rota and will receive shift allowance of 3,936.00 in addition to your salary. What you will be doing? As a Mobile Operative you will be involved and responsible for train preparations - ensuring that all locomotives and wagons are fit to go out on the mainline, carrying out essential safety checks. Be involved in dispatching trains in a safe and efficient manner, liaising with our Drivers and Operations Supervisors. You will also directly contribute to our service delivery and have the opportunity to influence the service we offer to out customers. The role will cover a varied number of customer sites, DB Cargo UK sites along with infrastructure worksites as required. Please contact the Recruitment Team if you would like more information about the role and our recruitment process. We will send out our Groundstaff Candidate Pack to you. What are we looking for? We are looking for someone who is highly motivated and committed to learning. Extremely safety focused who can take directions from managers and adhere to our rules and regulations. Have a flexible approach to shift working, with experience in teamwork and lone working. Attention to detail, problem solving and communication are also key skills we will be looking for in the successful candidate. Previous rail experience is advantageous however not essential. Requirements for the role: Candidates must hold a valid manual driving license, Live within a 1-hour commute of the central hub location for the area, GCSE Maths & English - Grade C / 4 or above, Be committed to learning in a classroom-based environment through training. What matters to you? Here at DB Cargo, we offer range of benefits as part of your employment. These will include: Full training into the role with a 5-week training course 31 days annual leave in addition to 2 public holidays Defined Contribution pension scheme with generous employer contribution - up to 10% employer contribution Free on-site parking EV charging at selected sites Health Cash Plan Available Cycle to work Scheme Charge and Go Scheme Manager led recognition programme for employees who live our values Access to DB Learning world We are dedicated to your continuous professional development. Depending on your role we have specialist training programs, apprenticeships, development plans, courses and qualifications we can support you through. Access to our employee benefits portal where you can take advantage of discounts for a variety of shops and services as well as accessing our wellbeing content We take the health and wellbeing of all employees seriously and provide access to an Employee Assistance Programme. Please click APPLY to send your CV for this role. Candidates with experience of: Rail Operative, Track Operative, Rail Maintenance Operative, Mobile Track Operative, Rail Technician, Track Technician, Railway Maintenance Technician, Rail Infrastructure Operative, Permanent Way Operative (P-Way Operative), Rail Engineering Operative, On-Track Operative, Possession Support Operative, Rail Labourer, Multi-Skilled Rail Operative, and Rail Site Operative, may also be considered for this role.
Are you an electrical or mechanical engineer who thrives in a fast-paced, highly automated environment - and ready to keep one of the UK's largest dairy sites running 24/7? At Lockerbie you'll work with cutting-edge process and packing technology, solving problems at pace and driving continuous improvement that keeps our site safe, efficient and reliable. How you will make an impact Based at our Lockerbie site on continental rotating shifts (12-hour days and nights), you'll support a well-invested plant producing household . You'll carry out reactive, planned and preventive maintenance, using data and problem-solving tools to reduce downtime and improve performance. Execute reactive, planned and preventative maintenance across processing, packing and utilities assets Lead structured problem solving and continuous improvement to enhance OEE and minimise downtime Use CMMS (SAP PM) and reporting suites to plan work, capture data and drive actions Support site projects, including non-capex modifications and CAPEX installations and commissioning Maintain and optimise a wide range of equipment (e.g. pasteurisation, homogenisers, separators, evaporators, dryers, fillers, palletisers, conveyors, robots, vision/X-ray systems, HVAC, boilers, chillers, compressors, CHP) What will make you successful you will bring a time-served apprenticeship or NVQ Level 3/ONC/HNC/HND (or proven equivalent experience), along with your background as a multiskilled maintenance or engineering technician, whether in mechanical or electrical disciplines. You will have experience working in fast-paced, automated, and safety-critical manufacturing environments, ideally within FMCG, and you will be computer literate, confident using SAP and Microsoft Office, and familiar with SCADA, HMIs, and Trend systems. Personally, you will be ambitious and driven, taking a proactive approach to learning and continuous improvement; you will demonstrate strong problem-solving skills, approaching challenges methodically and analytically, and remaining calm under pressure. You will be a team-focused communicator, prioritising safety and keeping stakeholders informed with clear updates. As part of our supportive team, you will experience a steep learning curve, face meaningful challenges, and benefit from colleagues who are eager to help you succeed and make you feel welcome. What do we offer We're committed to your growth and development, offering internal and external training opportunities. You'll enjoy a competitive salary, 24 days holiday, matched pension contributions up to 6%, life assurance, and flexible benefits. At Lockerbie, you'll join a team proud of its high job satisfaction and steep learning curve, with plenty of challenges and support to help you succeed. Things we'd love to tell you about our Lockerbie site Arla Lockerbie has received approximately £73.8 million in investment since 2005. Sixty percent of our colleagues at the site have over ten years of service, and around 75,000 cows rely on the dairy each day to process their milk. If you placed all the blocks of cheese produced at Lockerbie in a year end to end, they would reach a height equivalent to 2,428 Eiffel Towers. The amount of whey concentrate produced annually would be enough to fill four Olympic sized 50 metre swimming pools. The Arla Lockerbie site was officially opened by HRH Queen Elizabeth in 1975. Would you like to join us? Please apply as soon as possible as we will process applications on a continuous basis and close the recruitment once the right candidate is found
Apr 16, 2026
Full time
Are you an electrical or mechanical engineer who thrives in a fast-paced, highly automated environment - and ready to keep one of the UK's largest dairy sites running 24/7? At Lockerbie you'll work with cutting-edge process and packing technology, solving problems at pace and driving continuous improvement that keeps our site safe, efficient and reliable. How you will make an impact Based at our Lockerbie site on continental rotating shifts (12-hour days and nights), you'll support a well-invested plant producing household . You'll carry out reactive, planned and preventive maintenance, using data and problem-solving tools to reduce downtime and improve performance. Execute reactive, planned and preventative maintenance across processing, packing and utilities assets Lead structured problem solving and continuous improvement to enhance OEE and minimise downtime Use CMMS (SAP PM) and reporting suites to plan work, capture data and drive actions Support site projects, including non-capex modifications and CAPEX installations and commissioning Maintain and optimise a wide range of equipment (e.g. pasteurisation, homogenisers, separators, evaporators, dryers, fillers, palletisers, conveyors, robots, vision/X-ray systems, HVAC, boilers, chillers, compressors, CHP) What will make you successful you will bring a time-served apprenticeship or NVQ Level 3/ONC/HNC/HND (or proven equivalent experience), along with your background as a multiskilled maintenance or engineering technician, whether in mechanical or electrical disciplines. You will have experience working in fast-paced, automated, and safety-critical manufacturing environments, ideally within FMCG, and you will be computer literate, confident using SAP and Microsoft Office, and familiar with SCADA, HMIs, and Trend systems. Personally, you will be ambitious and driven, taking a proactive approach to learning and continuous improvement; you will demonstrate strong problem-solving skills, approaching challenges methodically and analytically, and remaining calm under pressure. You will be a team-focused communicator, prioritising safety and keeping stakeholders informed with clear updates. As part of our supportive team, you will experience a steep learning curve, face meaningful challenges, and benefit from colleagues who are eager to help you succeed and make you feel welcome. What do we offer We're committed to your growth and development, offering internal and external training opportunities. You'll enjoy a competitive salary, 24 days holiday, matched pension contributions up to 6%, life assurance, and flexible benefits. At Lockerbie, you'll join a team proud of its high job satisfaction and steep learning curve, with plenty of challenges and support to help you succeed. Things we'd love to tell you about our Lockerbie site Arla Lockerbie has received approximately £73.8 million in investment since 2005. Sixty percent of our colleagues at the site have over ten years of service, and around 75,000 cows rely on the dairy each day to process their milk. If you placed all the blocks of cheese produced at Lockerbie in a year end to end, they would reach a height equivalent to 2,428 Eiffel Towers. The amount of whey concentrate produced annually would be enough to fill four Olympic sized 50 metre swimming pools. The Arla Lockerbie site was officially opened by HRH Queen Elizabeth in 1975. Would you like to join us? Please apply as soon as possible as we will process applications on a continuous basis and close the recruitment once the right candidate is found
TeamJobs are seeking experienced and skilled CNC Grinder to join our client's team in Yeovil. The successful candidates will be responsible for the grinding of aerospace components in strict accordance with manufacturing instructions, specifications, and regulatory requirements. Location: Yeovil, Somerset Pay Rate for Swing Shift: 23.02 p/h/ 23.46 after 12 weeks Working hours: Week 1 - Monday to Thursday (07:00 to 15:30) & Friday (07:00 to 13:00) Week 2 - Monday to Thursday (15:30 to 00:00) Pay Rate for Night Shift: 19.51 p/h rising to 29.27 once you move to the night shift, Working hours: To begin with you will be working on a Day shift for the first month whilst you're training and you will then move to the night shift Training Hours Monday to Friday 7am until 3.30pm. Night Shift Hours: Hours - 34.5 hours per week Sun (22:00) - Mon (07:00) (8.5 hours) Mon - Thur (00:00 - 07:00) (6.5 hours per day) Key Responsibilities: Internal/External grinding using MDI (Manual Data Input) CNC machinery, surface grinding and thread grinding. OCQ - Operator Control of Quality (i.e. Stamping to confirm quality of assemblies are to Company and Customer standards). To achieve on time delivery by ensuring work is completed on time and to the required standard. Interpreting engineering drawings, following the process layout and documentation procedures. Working effectively in a lean environment. Qualifications and Experience: Engineering Apprenticeship (Desirable but not Essential). Knowledge of grinding tolerances/ finishes to Aerospace Standard i.e. 0.0002" internal/external diameter, 2-4 Micro Inch surface finishes and concentrate of 0.0002". Honing experience. Knowledge of hand measuring equipment such as digital micrometer, comparators, air plug gauges and surface finish measuring equipment. High standard of Health & Safety. Adhering to Company Processes & Procedures. Working in a Customer-focused environment and achieving targets. Working with Designers and Engineers. Skills and Attributes: The position requires the applicant to have an understanding of Aerospace practice and the significance of the safety critical work undertaken. PC literate. Be able to display essential skills in the adherence to Health & Safety standards at all times, teamwork, flexibility and the ability to use initiative. Machining skills are desirable. Proactive and continually looking to develop and learn new skills. Any further training requirements will be provided:- PC skills (incl. Company Operating System), Manual Handling, Abrasive Wheels, 5S, and general Health & Safety. Please note that a drug screening is required as part of the pre-employment process. Due to security requirements on this site all worker's nationality needs to be UK, EU or NATO. STRMP
Apr 16, 2026
Contractor
TeamJobs are seeking experienced and skilled CNC Grinder to join our client's team in Yeovil. The successful candidates will be responsible for the grinding of aerospace components in strict accordance with manufacturing instructions, specifications, and regulatory requirements. Location: Yeovil, Somerset Pay Rate for Swing Shift: 23.02 p/h/ 23.46 after 12 weeks Working hours: Week 1 - Monday to Thursday (07:00 to 15:30) & Friday (07:00 to 13:00) Week 2 - Monday to Thursday (15:30 to 00:00) Pay Rate for Night Shift: 19.51 p/h rising to 29.27 once you move to the night shift, Working hours: To begin with you will be working on a Day shift for the first month whilst you're training and you will then move to the night shift Training Hours Monday to Friday 7am until 3.30pm. Night Shift Hours: Hours - 34.5 hours per week Sun (22:00) - Mon (07:00) (8.5 hours) Mon - Thur (00:00 - 07:00) (6.5 hours per day) Key Responsibilities: Internal/External grinding using MDI (Manual Data Input) CNC machinery, surface grinding and thread grinding. OCQ - Operator Control of Quality (i.e. Stamping to confirm quality of assemblies are to Company and Customer standards). To achieve on time delivery by ensuring work is completed on time and to the required standard. Interpreting engineering drawings, following the process layout and documentation procedures. Working effectively in a lean environment. Qualifications and Experience: Engineering Apprenticeship (Desirable but not Essential). Knowledge of grinding tolerances/ finishes to Aerospace Standard i.e. 0.0002" internal/external diameter, 2-4 Micro Inch surface finishes and concentrate of 0.0002". Honing experience. Knowledge of hand measuring equipment such as digital micrometer, comparators, air plug gauges and surface finish measuring equipment. High standard of Health & Safety. Adhering to Company Processes & Procedures. Working in a Customer-focused environment and achieving targets. Working with Designers and Engineers. Skills and Attributes: The position requires the applicant to have an understanding of Aerospace practice and the significance of the safety critical work undertaken. PC literate. Be able to display essential skills in the adherence to Health & Safety standards at all times, teamwork, flexibility and the ability to use initiative. Machining skills are desirable. Proactive and continually looking to develop and learn new skills. Any further training requirements will be provided:- PC skills (incl. Company Operating System), Manual Handling, Abrasive Wheels, 5S, and general Health & Safety. Please note that a drug screening is required as part of the pre-employment process. Due to security requirements on this site all worker's nationality needs to be UK, EU or NATO. STRMP
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Electrical Inspector 12 month contract Based in Bolton Offering 28.35ph Inside IR35 Do you have experience as an Electrical Inspector? Do you hold Electrical/Electronics trade qualifications? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Electrical Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! You will be involved in: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware Certification of product in line with processes and procedures Examining for correct assembly including verifying all forms of electrical connections Examining the finish of all parts Inspect for physical damage Inspection checks for non-product certification activities Raise and maintain relevant data records/non-conformance reports Produce relevant inspection/quality control documentation/history sheets Maintain product certification and approval via regular audits Ensure compliance with all associated procedures applicable to the manufacturing process Your skillest may include: Maintain a safe working environment Maintain a good housekeeping policy Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC Experience as a skilled person. IPC 610 & IPC 620 certified/trained Manual handling training ESD Training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Electrical Inspector 12 month contract Based in Bolton Offering 28.35ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Apr 16, 2026
Contractor
Electrical Inspector 12 month contract Based in Bolton Offering 28.35ph Inside IR35 Do you have experience as an Electrical Inspector? Do you hold Electrical/Electronics trade qualifications? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Electrical Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! You will be involved in: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware Certification of product in line with processes and procedures Examining for correct assembly including verifying all forms of electrical connections Examining the finish of all parts Inspect for physical damage Inspection checks for non-product certification activities Raise and maintain relevant data records/non-conformance reports Produce relevant inspection/quality control documentation/history sheets Maintain product certification and approval via regular audits Ensure compliance with all associated procedures applicable to the manufacturing process Your skillest may include: Maintain a safe working environment Maintain a good housekeeping policy Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC Experience as a skilled person. IPC 610 & IPC 620 certified/trained Manual handling training ESD Training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Electrical Inspector 12 month contract Based in Bolton Offering 28.35ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job: Welder Location: Govan/Scotstoun (Glasgow), United Kingdom Salary & Shifts: Range of payrates based on shift patterns, full breakdown below Contract length: 10 months (extensions available) Contracted hours: 37 hours (overtime available) Rate card: Available on request Morson are partnered up with a prestigious defence client (leader in the Defence and Security sector) in search for time served Welders. You ll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you ll be empowered to fulfil your potential. What is expected from me? As a qualified Welder you will have an important role within the business to stay professional throughout your contract delivering to the highest standard ensuring Safety, Health and Environmental regulations are followed. Job Description - Welding different materials (carbon & stainless steel & aluminium) - Welding using different welding processes i.e., Manual Metal Arc, Metal Active Gas, Metal Inert Gas, Automatic & Semi-Automatic Machine Welding (Submerged Arc & KAT) & Resistance Welding (Stud Welding) - Welding butts and fillets to a high standard - Main process FCAW / MAG using ceramic tiles Requirements - Qualifications & Compliance: Holds a full Engineering Modern Apprenticeship, trade papers. - Flux core arc welding experience - Knowledge and experience in Welding and use of associated equipment - Must be comfortable working in confined spaces and or at height - Safety certification i.e. SHE Induction, COSHH Awareness, working at height etc - Background in marine, Oil and Gas, major construction / manufacturing environment Benefits - Build your portfolio by working on advanced defence project - Provide security for our country and allies for decades to come - Permanent opportunities with leader in the defence and security sector Next steps - If interested in finding out more information regarding the role, please click apply and one of the team members will be in touch to discuss the role further
Apr 16, 2026
Contractor
Job: Welder Location: Govan/Scotstoun (Glasgow), United Kingdom Salary & Shifts: Range of payrates based on shift patterns, full breakdown below Contract length: 10 months (extensions available) Contracted hours: 37 hours (overtime available) Rate card: Available on request Morson are partnered up with a prestigious defence client (leader in the Defence and Security sector) in search for time served Welders. You ll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you ll be empowered to fulfil your potential. What is expected from me? As a qualified Welder you will have an important role within the business to stay professional throughout your contract delivering to the highest standard ensuring Safety, Health and Environmental regulations are followed. Job Description - Welding different materials (carbon & stainless steel & aluminium) - Welding using different welding processes i.e., Manual Metal Arc, Metal Active Gas, Metal Inert Gas, Automatic & Semi-Automatic Machine Welding (Submerged Arc & KAT) & Resistance Welding (Stud Welding) - Welding butts and fillets to a high standard - Main process FCAW / MAG using ceramic tiles Requirements - Qualifications & Compliance: Holds a full Engineering Modern Apprenticeship, trade papers. - Flux core arc welding experience - Knowledge and experience in Welding and use of associated equipment - Must be comfortable working in confined spaces and or at height - Safety certification i.e. SHE Induction, COSHH Awareness, working at height etc - Background in marine, Oil and Gas, major construction / manufacturing environment Benefits - Build your portfolio by working on advanced defence project - Provide security for our country and allies for decades to come - Permanent opportunities with leader in the defence and security sector Next steps - If interested in finding out more information regarding the role, please click apply and one of the team members will be in touch to discuss the role further
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Apr 16, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
