Job Title: Commercial Gas Engineer Location: Edinburgh Summary: Are you a skilled and experienced Commercial Gas Engineer looking for a new opportunity to showcase your expertise? If you are ready for a challenging and rewarding role, we have an exciting position for you! We are currently seeking a dedicated Commercial Gas Engineer to join our client's team and play a pivotal role in maintaining and servicing various sites. Benefits: 50,000per annum Standard Holiday Enhanced pension Scheme Health care Overtime available Key Responsibilities: Experience maintaining, testing & fault finding on a range of plant and equipment including, but not limited to, gas appliances, gas boilers, pumps, ventilation and associated equipment. Experience working on HVAC equipment including Air Handling Units. Plumbing works. Full, clean driving Licence. Qualifications and Experience: COCN1 or CODNCO1 (CCN1) TPCP1 & TPCP1A ICPN1 Appliances CIGA1, CDGA1, CORT1 If you're a Gas Engineer with the required qualifications and experience, we invite you to apply for this role. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Apr 22, 2026
Full time
Job Title: Commercial Gas Engineer Location: Edinburgh Summary: Are you a skilled and experienced Commercial Gas Engineer looking for a new opportunity to showcase your expertise? If you are ready for a challenging and rewarding role, we have an exciting position for you! We are currently seeking a dedicated Commercial Gas Engineer to join our client's team and play a pivotal role in maintaining and servicing various sites. Benefits: 50,000per annum Standard Holiday Enhanced pension Scheme Health care Overtime available Key Responsibilities: Experience maintaining, testing & fault finding on a range of plant and equipment including, but not limited to, gas appliances, gas boilers, pumps, ventilation and associated equipment. Experience working on HVAC equipment including Air Handling Units. Plumbing works. Full, clean driving Licence. Qualifications and Experience: COCN1 or CODNCO1 (CCN1) TPCP1 & TPCP1A ICPN1 Appliances CIGA1, CDGA1, CORT1 If you're a Gas Engineer with the required qualifications and experience, we invite you to apply for this role. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Description As a Gas Designer you will play a key role in the design process, from site surveys through to the production of detailed drawings, while developing your technical expertise and working closely with experienced engineers and project teams. Key Responsibilities Monitor leading industry practices, recommend new design approaches, and identify upcoming trends click apply for full job details
Apr 22, 2026
Full time
Description As a Gas Designer you will play a key role in the design process, from site surveys through to the production of detailed drawings, while developing your technical expertise and working closely with experienced engineers and project teams. Key Responsibilities Monitor leading industry practices, recommend new design approaches, and identify upcoming trends click apply for full job details
Our client, an established Building services and Integration company, is currently recruiting for an O&M Site Manager to join their team. The O&M Site Manager will be responsible for providing management of sites and operational projects to ensure all sites are operating well. This position will differ from conventional management in that you will be given the opportunity to 'own' a project from adoption through to operation with involvement in pricing from bid stage through to ongoing O&M. Key Responsibilities for the O&M Site Manager : Projects will range from single site boiler room and energy centre installations or servicing through to large new build and retrofit district heating schemes. Responsible for the safe and effective operation of several district heating sites across London and further afield. For the sites that you manage, you will be responsible for delivering the following (but not limited to); Setting up procedures and processes for new heat networks as they come across into the operational phase, either through adopting live contracts or new build sites. Ensuring high availability through scoping of spare parts, site visibility/remote monitoring and data analysis. Pro-actively manage and build our client and customer relationships with regards to day to day running of the sites and attendance to any regular client reporting meetings. Responsible for operational budgets & reporting against business KPI's. This will include scoping up corrective works for system improvements and any potential breakdowns. Skills Required for the O&M Site Manager : Technical qualifications in an engineering/ operations management or related discipline to degree level and / or equivalent experience relevant to the role. Proven experience in the operation of large projects, preferably in district heating, including CHP, gas boilers, biomass boilers, energy centres etc. Understanding of BMS/SCADA systems and/or energy software programming Excellent understanding of and interest in 'how systems / equipment work', with practical experience in operating plants or delivering projects. Excellent communication skills for liaising with both internal & external stakeholders Driving License Please apply as directed!
Apr 22, 2026
Full time
Our client, an established Building services and Integration company, is currently recruiting for an O&M Site Manager to join their team. The O&M Site Manager will be responsible for providing management of sites and operational projects to ensure all sites are operating well. This position will differ from conventional management in that you will be given the opportunity to 'own' a project from adoption through to operation with involvement in pricing from bid stage through to ongoing O&M. Key Responsibilities for the O&M Site Manager : Projects will range from single site boiler room and energy centre installations or servicing through to large new build and retrofit district heating schemes. Responsible for the safe and effective operation of several district heating sites across London and further afield. For the sites that you manage, you will be responsible for delivering the following (but not limited to); Setting up procedures and processes for new heat networks as they come across into the operational phase, either through adopting live contracts or new build sites. Ensuring high availability through scoping of spare parts, site visibility/remote monitoring and data analysis. Pro-actively manage and build our client and customer relationships with regards to day to day running of the sites and attendance to any regular client reporting meetings. Responsible for operational budgets & reporting against business KPI's. This will include scoping up corrective works for system improvements and any potential breakdowns. Skills Required for the O&M Site Manager : Technical qualifications in an engineering/ operations management or related discipline to degree level and / or equivalent experience relevant to the role. Proven experience in the operation of large projects, preferably in district heating, including CHP, gas boilers, biomass boilers, energy centres etc. Understanding of BMS/SCADA systems and/or energy software programming Excellent understanding of and interest in 'how systems / equipment work', with practical experience in operating plants or delivering projects. Excellent communication skills for liaising with both internal & external stakeholders Driving License Please apply as directed!
My client is a leading organisation in Secure communications and Data at Rest domain! They are expanding their UK team to support multiple Cyber and Information Assurance development projects. The company is seeking an experienced FPGA Design Engineer to join a fast-paced, multi-disciplinary environment focused on both standard products and bespoke secure digital design solutions. This role involves full lifecycle ownership of FPGA solutions-from requirements and architecture through implementation, verification, and production. The position covers complex FPGA designs incorporating both industry-standard and custom protocols. Key Responsibilities include - Own the delivery of FPGA solutions from requirements through to production. Lead the elicitation and interpretation of requirements for FPGA implementations. Define FPGA architecture in collaboration with the wider development team. Work alongside Project Managers to plan and deliver against project timelines. Coordinate other FPGA engineers when required. Liaise with external FPGA and IP suppliers. Develop test benches and perform in-system testing. Contribute to proposals, estimations, and technology roadmaps when needed. Essential Skills & Experience - Proven track record delivering FPGA designs across the full development lifecycle. Strong VHDL skills for FPGA design and verification. Experience optimising designs for performance and power efficiency. Experience debugging and integrating FPGA solutions in hardware. Proficient with configuration management tools. Experience with Microchip devices and Libero for design synthesis (advantage). Experience verifying HDL using ModelSim or Questasim (UVM beneficial). Desirable Skills - Requirements analysis and management (e.g., DOORS). Experience with SmartFusion, PolarFire or Igloo devices. Knowledge of PCIe NVMe implementations in FPGA. Experience with Xilinx or Altera devices/toolchains. Familiarity with 3rd-party IP integration. Design for security principles. Embedded firmware development (C/C++/assembler). Understanding of cryptographic algorithms and standards. Experience integrating FPGAs within larger hardware platforms. If you're interested in this role, then please apply. I will reach out to you via phone call to discuss further!
Apr 22, 2026
Full time
My client is a leading organisation in Secure communications and Data at Rest domain! They are expanding their UK team to support multiple Cyber and Information Assurance development projects. The company is seeking an experienced FPGA Design Engineer to join a fast-paced, multi-disciplinary environment focused on both standard products and bespoke secure digital design solutions. This role involves full lifecycle ownership of FPGA solutions-from requirements and architecture through implementation, verification, and production. The position covers complex FPGA designs incorporating both industry-standard and custom protocols. Key Responsibilities include - Own the delivery of FPGA solutions from requirements through to production. Lead the elicitation and interpretation of requirements for FPGA implementations. Define FPGA architecture in collaboration with the wider development team. Work alongside Project Managers to plan and deliver against project timelines. Coordinate other FPGA engineers when required. Liaise with external FPGA and IP suppliers. Develop test benches and perform in-system testing. Contribute to proposals, estimations, and technology roadmaps when needed. Essential Skills & Experience - Proven track record delivering FPGA designs across the full development lifecycle. Strong VHDL skills for FPGA design and verification. Experience optimising designs for performance and power efficiency. Experience debugging and integrating FPGA solutions in hardware. Proficient with configuration management tools. Experience with Microchip devices and Libero for design synthesis (advantage). Experience verifying HDL using ModelSim or Questasim (UVM beneficial). Desirable Skills - Requirements analysis and management (e.g., DOORS). Experience with SmartFusion, PolarFire or Igloo devices. Knowledge of PCIe NVMe implementations in FPGA. Experience with Xilinx or Altera devices/toolchains. Familiarity with 3rd-party IP integration. Design for security principles. Embedded firmware development (C/C++/assembler). Understanding of cryptographic algorithms and standards. Experience integrating FPGAs within larger hardware platforms. If you're interested in this role, then please apply. I will reach out to you via phone call to discuss further!
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters all rates are paid through Umbrella
Apr 22, 2026
Contractor
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters all rates are paid through Umbrella
Why choose us? BRUSH Group provides the energy solutions that help power our built world . From power transformers to switchgear and engineering solutions, for generations, the BRUSH brand has stood for engineering excellence. We are committed to supporting the global effort for industrial decarbonisation and sustainable development and have set ambitious objectives to achieve our target of net zero greenhouse gas emissions by 2050. What's the role? The role is part of the BRUSH Group IT Leadership team with purpose of the role to lead BRUSH's IT Operations function, managing all aspects of IT infrastructure, cyber and end user support, ensuring that technology aligns with business needs and drives improvement in service, security and scalability.Leads a team whose day to day responsibilities include active management of IT services in areas such as IT Helpdesk, Infrastructure support (Servers, network, hosting), cyber / information security, end user compute support, major incident management, service monitoring, change management, problem management. Key Responsibilities: Manage IT Operations activity in the areas of infrastructure, services delivery and cyber security to support the delivery of BRUSH's IT objectives, including the development of IT operational roadmaps. Team building and growth - design and lead a high performing, scalable IT operations organisation with clear roles, leadership and accountability.This may be through the direct management of staff or third party solution providers. Continually review IT requirements and deliverables against the emerging requirements, BRUSH strategic plans and other business plans / targets to ensure that technology, staff and resources are appropriately delivered. Understand the evolving IT landscape and organisational objectives in order to identify emerging operational challenges and opportunities. Be a core member of the BRUSH Technology change board ensuring all IT changes are aligned to strategy. Ensure the high availability, performance and cybersecurity of BRUSH IT environment. Identify opportunities for continuous improvement in the IT Operations function and recommend appropriate strategies to BRUSH teams, the Director of IT, or appropriate governance boards What are we looking for: Substantial experience (5-10 years) in a similar IT leadership role, including leadership of internal teams. Proven track record in managing enterprise IT environments and operations. Experience in developing IT roadmaps aligned to Company and IT strategies. Experience of IT procurement, licence renewals and vendor management. Experience leading change management and major IT upgrades / deployments. Broad knowledge of all aspects of IT technology, in particular Microsoft OS's, applications, cloud offerings and cyber tools. Flexibility to travel between BRUSH sites. Strong understanding of ITIL frameworks and hands-on experience implementing ITSM best practices. What's in it for you? Competitive salary Holiday allowance starting at 26 days per annum plus bank holidays (pro rata for part time roles) Flexible and Hybrid working options (role dependant) Life insurance - 4 x annual salary Enhanced Company Pension scheme 24/7 free and confidential Employee Assistance Programme GP24 Service - Access to remote, private GP services 24/7, 365 days a year plus Second Medical Opinions. BRUSHRewards - Discover plenty of ways to get more active and make great savings on everyday essentials as well as gifts for loved ones, holidays and special treats for yourself. Family friendly policies including Enhanced Maternity/Paternity Bike2work scheme Long Service Awards Developing our people is important to us - we support and encourage development by offering ongoing professional development and training. About The Organisation BRUSH Group provide agile and adaptive engineering solutions and products, including consultancy services, design, and project management as well as award-winning product technology, to a wide range of projects.A chosen partner for national and regional power generation and distribution network operators, through innovation and a commitment to delivering solutions that address grid-resilience and drive system change, we support the global drive to net-zero, helping create a future-proof Infrastructure.
Apr 22, 2026
Full time
Why choose us? BRUSH Group provides the energy solutions that help power our built world . From power transformers to switchgear and engineering solutions, for generations, the BRUSH brand has stood for engineering excellence. We are committed to supporting the global effort for industrial decarbonisation and sustainable development and have set ambitious objectives to achieve our target of net zero greenhouse gas emissions by 2050. What's the role? The role is part of the BRUSH Group IT Leadership team with purpose of the role to lead BRUSH's IT Operations function, managing all aspects of IT infrastructure, cyber and end user support, ensuring that technology aligns with business needs and drives improvement in service, security and scalability.Leads a team whose day to day responsibilities include active management of IT services in areas such as IT Helpdesk, Infrastructure support (Servers, network, hosting), cyber / information security, end user compute support, major incident management, service monitoring, change management, problem management. Key Responsibilities: Manage IT Operations activity in the areas of infrastructure, services delivery and cyber security to support the delivery of BRUSH's IT objectives, including the development of IT operational roadmaps. Team building and growth - design and lead a high performing, scalable IT operations organisation with clear roles, leadership and accountability.This may be through the direct management of staff or third party solution providers. Continually review IT requirements and deliverables against the emerging requirements, BRUSH strategic plans and other business plans / targets to ensure that technology, staff and resources are appropriately delivered. Understand the evolving IT landscape and organisational objectives in order to identify emerging operational challenges and opportunities. Be a core member of the BRUSH Technology change board ensuring all IT changes are aligned to strategy. Ensure the high availability, performance and cybersecurity of BRUSH IT environment. Identify opportunities for continuous improvement in the IT Operations function and recommend appropriate strategies to BRUSH teams, the Director of IT, or appropriate governance boards What are we looking for: Substantial experience (5-10 years) in a similar IT leadership role, including leadership of internal teams. Proven track record in managing enterprise IT environments and operations. Experience in developing IT roadmaps aligned to Company and IT strategies. Experience of IT procurement, licence renewals and vendor management. Experience leading change management and major IT upgrades / deployments. Broad knowledge of all aspects of IT technology, in particular Microsoft OS's, applications, cloud offerings and cyber tools. Flexibility to travel between BRUSH sites. Strong understanding of ITIL frameworks and hands-on experience implementing ITSM best practices. What's in it for you? Competitive salary Holiday allowance starting at 26 days per annum plus bank holidays (pro rata for part time roles) Flexible and Hybrid working options (role dependant) Life insurance - 4 x annual salary Enhanced Company Pension scheme 24/7 free and confidential Employee Assistance Programme GP24 Service - Access to remote, private GP services 24/7, 365 days a year plus Second Medical Opinions. BRUSHRewards - Discover plenty of ways to get more active and make great savings on everyday essentials as well as gifts for loved ones, holidays and special treats for yourself. Family friendly policies including Enhanced Maternity/Paternity Bike2work scheme Long Service Awards Developing our people is important to us - we support and encourage development by offering ongoing professional development and training. About The Organisation BRUSH Group provide agile and adaptive engineering solutions and products, including consultancy services, design, and project management as well as award-winning product technology, to a wide range of projects.A chosen partner for national and regional power generation and distribution network operators, through innovation and a commitment to delivering solutions that address grid-resilience and drive system change, we support the global drive to net-zero, helping create a future-proof Infrastructure.
Astute's Power Team are currently recruiting for 6x Mechanical Commissioning Technicians to join the EPC Contractor on the decommissioning of a CHP plant based in Purfleet. The 6x Mechanical Commissioning Technician roles come with a day rate from 400.00 to 450.00 per day outside of IR35. Role responsibilities and key skills for the role: Carry out mechanical commissioning and decommissioning activities on CHP plant systems, including safe shutdown, isolation, and preparation of equipment for dismantling. Assist with the decommissioning of gas engines and/or gas turbines, including controlled run-downs, fluid draining, preservation, and disconnection of mechanical systems. Perform mechanical inspections, condition assessments, and verification of plant status prior to and during decommissioning works. Execute isolation, de-energisation, and lock-out/tag-out (LOTO) procedures in line with site safety and permit-to-work systems. Support removal and disconnection of mechanical equipment such as pumps, compressors, heat exchangers, pipework, and auxiliary systems. Carry out system flushing, draining, purging, and cleaning activities (oil, water, gas systems) to ensure safe dismantling and environmental compliance. Assist with reinstatement or modification works where required, including blanking, capping, and mechanical disconnections. Identify and report mechanical defects, leaks, or hazards encountered during decommissioning activities. Work closely with electrical, C&I, and demolition teams to ensure coordinated and safe execution of decommissioning sequences. Maintain accurate records of completed works, test sheets, and decommissioning documentation in line with EPC requirements. Experience working on CHP plants, power generation, or heavy process environments. Hands-on experience with gas engines and/or gas turbines (commissioning, shutdown, or maintenance). Familiar with mechanical systems such as rotating equipment, piping systems, valves, and auxiliaries. Strong understanding of site safety, LOTO, and permit-to-work systems. Location, day rate and timeframe of the Mechanical Commissioning Technician positions: Purfleet 400.00 to 450.00 per day Immediate start date 3 months INDPOW Astute People are acting as an employment business in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Apr 22, 2026
Contractor
Astute's Power Team are currently recruiting for 6x Mechanical Commissioning Technicians to join the EPC Contractor on the decommissioning of a CHP plant based in Purfleet. The 6x Mechanical Commissioning Technician roles come with a day rate from 400.00 to 450.00 per day outside of IR35. Role responsibilities and key skills for the role: Carry out mechanical commissioning and decommissioning activities on CHP plant systems, including safe shutdown, isolation, and preparation of equipment for dismantling. Assist with the decommissioning of gas engines and/or gas turbines, including controlled run-downs, fluid draining, preservation, and disconnection of mechanical systems. Perform mechanical inspections, condition assessments, and verification of plant status prior to and during decommissioning works. Execute isolation, de-energisation, and lock-out/tag-out (LOTO) procedures in line with site safety and permit-to-work systems. Support removal and disconnection of mechanical equipment such as pumps, compressors, heat exchangers, pipework, and auxiliary systems. Carry out system flushing, draining, purging, and cleaning activities (oil, water, gas systems) to ensure safe dismantling and environmental compliance. Assist with reinstatement or modification works where required, including blanking, capping, and mechanical disconnections. Identify and report mechanical defects, leaks, or hazards encountered during decommissioning activities. Work closely with electrical, C&I, and demolition teams to ensure coordinated and safe execution of decommissioning sequences. Maintain accurate records of completed works, test sheets, and decommissioning documentation in line with EPC requirements. Experience working on CHP plants, power generation, or heavy process environments. Hands-on experience with gas engines and/or gas turbines (commissioning, shutdown, or maintenance). Familiar with mechanical systems such as rotating equipment, piping systems, valves, and auxiliaries. Strong understanding of site safety, LOTO, and permit-to-work systems. Location, day rate and timeframe of the Mechanical Commissioning Technician positions: Purfleet 400.00 to 450.00 per day Immediate start date 3 months INDPOW Astute People are acting as an employment business in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Discipline: Pre-Construction & Development Manager Location: London Term: Permanent Position Salary: up to £65,000 per annum About us Integrate Resources Group is a specialist recruitment consultancy providing permanent, contract and project-based workforce solutions across the Infrastructure, Construction, Power and Oil & Gas sectors. We partner with contractors, EPCs, asset owners and consultancies to support complex, safety-critical and programme-driven environments nationwide. The Role We are seeking an experienced Pre-Construction Manager to join a major projects team based in London, supporting high-profile infrastructure programmes such as HS2 and other large-scale developments. You will play a key role from early engagement through to contract award, ensuring commercially robust, technically compliant, and deliverable solutions. Key responsibilities include: Undertaking market research to support bid strategy and opportunity selection Leading the preparation and management of bids from inception through tender submission, award, and contract close Reviewing and negotiating contracts, including commercial and technical risk Defining technical specifications in line with client requirements and internal standards Coordinating multidisciplinary inputs across design, commercial, planning, and supply chain teams Embedding sustainability, ecological principles, and modern construction methods within proposals Ensuring a seamless handover from pre-construction to project delivery teams Supporting business development activity and contributing to strategic growth plans Assisting with the development and ongoing review of business continuity planning Requirements Degree (or equivalent experience) in Construction Management, Engineering, or a related discipline Proven experience in a Pre-Construction, Bid Management, or Business Development role within the UK construction or infrastructure market Experience working on major projects or large, complex programmes (rail, infrastructure, or complex buildings) Strong understanding of procurement routes, supply chains, and contractor engagement Solid technical knowledge of steelwork, façade systems, aluminium, glazing, and/or complex structural packages High level of commercial awareness, including cost planning, risk management, and contract fundamentals Competent with industry-standard tools such as Microsoft Excel, Microsoft Project, and AutoCAD Strong client-facing skills with the ability to communicate confidently at all level Why Apply? Work on some of the UK's most significant infrastructure projects London-based role with long-term programme visibility Opportunity to influence major bids from early strategy through to delivery Join a business that values quality, collaboration, and sustainable growth If you have a background in major infrastructure projects and are looking to take the next step in a senior pre-construction role, we'd like to hear from you.
Apr 22, 2026
Full time
Discipline: Pre-Construction & Development Manager Location: London Term: Permanent Position Salary: up to £65,000 per annum About us Integrate Resources Group is a specialist recruitment consultancy providing permanent, contract and project-based workforce solutions across the Infrastructure, Construction, Power and Oil & Gas sectors. We partner with contractors, EPCs, asset owners and consultancies to support complex, safety-critical and programme-driven environments nationwide. The Role We are seeking an experienced Pre-Construction Manager to join a major projects team based in London, supporting high-profile infrastructure programmes such as HS2 and other large-scale developments. You will play a key role from early engagement through to contract award, ensuring commercially robust, technically compliant, and deliverable solutions. Key responsibilities include: Undertaking market research to support bid strategy and opportunity selection Leading the preparation and management of bids from inception through tender submission, award, and contract close Reviewing and negotiating contracts, including commercial and technical risk Defining technical specifications in line with client requirements and internal standards Coordinating multidisciplinary inputs across design, commercial, planning, and supply chain teams Embedding sustainability, ecological principles, and modern construction methods within proposals Ensuring a seamless handover from pre-construction to project delivery teams Supporting business development activity and contributing to strategic growth plans Assisting with the development and ongoing review of business continuity planning Requirements Degree (or equivalent experience) in Construction Management, Engineering, or a related discipline Proven experience in a Pre-Construction, Bid Management, or Business Development role within the UK construction or infrastructure market Experience working on major projects or large, complex programmes (rail, infrastructure, or complex buildings) Strong understanding of procurement routes, supply chains, and contractor engagement Solid technical knowledge of steelwork, façade systems, aluminium, glazing, and/or complex structural packages High level of commercial awareness, including cost planning, risk management, and contract fundamentals Competent with industry-standard tools such as Microsoft Excel, Microsoft Project, and AutoCAD Strong client-facing skills with the ability to communicate confidently at all level Why Apply? Work on some of the UK's most significant infrastructure projects London-based role with long-term programme visibility Opportunity to influence major bids from early strategy through to delivery Join a business that values quality, collaboration, and sustainable growth If you have a background in major infrastructure projects and are looking to take the next step in a senior pre-construction role, we'd like to hear from you.
Assistant Purchaser Offshore Wind Industry Location: Norwich Salary : Competitive Are you passionate about operational purchasing activities? Do you want to work in the offshore wind industry where your skills and expertise will help secure a sustainable future based on renewable energy? Then keep reading Cadeler is looking for an Assistant Purchaser with your skills and interests! Cadeler is a global partner in the offshore wind industry, specializing in wind farm construction and maintenance. We are part of an industry that is now, more than ever, both relevant and play a critical role in the energy transition with a strong long-term outlook. As our industry continues to develop, so do we! We are now looking for an Assistant Purchaser to help participate in the sourcing process for various spend categories. What will you do? As our new Assistant Purchaser, you will assist in the operational procurement and logistics handling for our vessels and take the lead on small to mid-sized initiatives and projects within the procurement scope. Your main tasks include: Day-to-day operational purchasing activities related to support Marine operations, Projects, and Engineering. Processing of requisitions, orders, and invoices throughout the supply chain, including actions and administration to maintain an always-updated order list. Participate in and facilitate supplier meetings and maintain supplier relations Supplier management related to compliance with IHM regulations, Code of Conduct, and other required certifications or company policies. Participating in team initiatives and objectives Optimization of processes within the area of responsibility To succeed in this role Being part of the Cadeler community means you will have a natural interest and care for the environment and our shared mission to speed up the green energy transition. Your environmental considerations and the safety of our people and the planet will be a key priority in your daily work. We are looking for an organized team player, who thrives in a fast-paced environment and has attention to detail. We think you will be a good match if you: +2 years of purchasing experience from the marine, offshore wind, or oil & gas industry. Or +2 years of experience working in a corporate global company. Experience with MS Office and, in particular, Excel to ensure efficient spend analysis and other reporting. Experience in working with an ERP system. Experience with the procurement system Sertica is an advantage but not a requirement. Fluent in oral and written English Come work with us! By becoming a Cadeler employee, you will be part of a rapidly growing company with a diverse and energetic team. We offer an exciting position focused on delivering excellence in the face of interesting new challenges, within a positive and rewarding work environment in an international company with great development possibilities. Cadeler is headquartered in Copenhagen, but we also have offices in Vejle, UK, US, and Taiwan, as well as colleagues working offshore aboard our fleet of Wind Farm Installation Vessels (WFIV). To Apply If you feel you are a suitable candidate and would like to work for Cadeler, please click apply to be redirected to our website to complete your application.
Apr 22, 2026
Full time
Assistant Purchaser Offshore Wind Industry Location: Norwich Salary : Competitive Are you passionate about operational purchasing activities? Do you want to work in the offshore wind industry where your skills and expertise will help secure a sustainable future based on renewable energy? Then keep reading Cadeler is looking for an Assistant Purchaser with your skills and interests! Cadeler is a global partner in the offshore wind industry, specializing in wind farm construction and maintenance. We are part of an industry that is now, more than ever, both relevant and play a critical role in the energy transition with a strong long-term outlook. As our industry continues to develop, so do we! We are now looking for an Assistant Purchaser to help participate in the sourcing process for various spend categories. What will you do? As our new Assistant Purchaser, you will assist in the operational procurement and logistics handling for our vessels and take the lead on small to mid-sized initiatives and projects within the procurement scope. Your main tasks include: Day-to-day operational purchasing activities related to support Marine operations, Projects, and Engineering. Processing of requisitions, orders, and invoices throughout the supply chain, including actions and administration to maintain an always-updated order list. Participate in and facilitate supplier meetings and maintain supplier relations Supplier management related to compliance with IHM regulations, Code of Conduct, and other required certifications or company policies. Participating in team initiatives and objectives Optimization of processes within the area of responsibility To succeed in this role Being part of the Cadeler community means you will have a natural interest and care for the environment and our shared mission to speed up the green energy transition. Your environmental considerations and the safety of our people and the planet will be a key priority in your daily work. We are looking for an organized team player, who thrives in a fast-paced environment and has attention to detail. We think you will be a good match if you: +2 years of purchasing experience from the marine, offshore wind, or oil & gas industry. Or +2 years of experience working in a corporate global company. Experience with MS Office and, in particular, Excel to ensure efficient spend analysis and other reporting. Experience in working with an ERP system. Experience with the procurement system Sertica is an advantage but not a requirement. Fluent in oral and written English Come work with us! By becoming a Cadeler employee, you will be part of a rapidly growing company with a diverse and energetic team. We offer an exciting position focused on delivering excellence in the face of interesting new challenges, within a positive and rewarding work environment in an international company with great development possibilities. Cadeler is headquartered in Copenhagen, but we also have offices in Vejle, UK, US, and Taiwan, as well as colleagues working offshore aboard our fleet of Wind Farm Installation Vessels (WFIV). To Apply If you feel you are a suitable candidate and would like to work for Cadeler, please click apply to be redirected to our website to complete your application.
Dual Fuel Smart Meter Installer 44,000 Basic (Inside M25) 42,000 Basic (Outside M25) 1,000 Bonus for 3 Phase or REGT1 250 Saturday Rate (Optional) 300 Sunday Rate Self-Employed Option Available: 220 Day Rate (Van Supplied) Benefits Company van & fuel card provided Samsung phone, tablet, tools and PPE provided Standard working hours: 8:00am - 5:00pm Annual leave entitlement Work kept as close to your home postcode as possible The Role As a Dual Fuel Smart Meter Installer, you will be responsible for installing and exchanging gas and electric meters while delivering a high standard of customer service. You will work to industry safety standards, ensure compliance on every job, and continuously develop your technical skills. Locations We are recruiting across: Chelmsford, Kingston upon Thames, Aberdeen, Edinburgh, Bromley, Reading, Hemel Hempstead, Brighton, Bath, Dorchester Requirements (Essential) Dual fuel experience CCN1 or CMA1 and MET1 Full UK driving licence (Maximum 6 penalty points) About RECenergy RECenergy is a specialist in smart metering, renewables, and energy recruitment. We work with leading contractors across the UK, offering stable, long-term opportunities with a strong focus on work-life balance. Apply Now Call: (phone number removed) Email:
Apr 22, 2026
Full time
Dual Fuel Smart Meter Installer 44,000 Basic (Inside M25) 42,000 Basic (Outside M25) 1,000 Bonus for 3 Phase or REGT1 250 Saturday Rate (Optional) 300 Sunday Rate Self-Employed Option Available: 220 Day Rate (Van Supplied) Benefits Company van & fuel card provided Samsung phone, tablet, tools and PPE provided Standard working hours: 8:00am - 5:00pm Annual leave entitlement Work kept as close to your home postcode as possible The Role As a Dual Fuel Smart Meter Installer, you will be responsible for installing and exchanging gas and electric meters while delivering a high standard of customer service. You will work to industry safety standards, ensure compliance on every job, and continuously develop your technical skills. Locations We are recruiting across: Chelmsford, Kingston upon Thames, Aberdeen, Edinburgh, Bromley, Reading, Hemel Hempstead, Brighton, Bath, Dorchester Requirements (Essential) Dual fuel experience CCN1 or CMA1 and MET1 Full UK driving licence (Maximum 6 penalty points) About RECenergy RECenergy is a specialist in smart metering, renewables, and energy recruitment. We work with leading contractors across the UK, offering stable, long-term opportunities with a strong focus on work-life balance. Apply Now Call: (phone number removed) Email:
This commercial heating company based in Devon have been trading for many years and count over 500 clients who use them on a yearly basis. They are family run and their biggest selling point is that they treat their 12 engineers like part of that family - you are a person, you are NEVER a number. You are valued when was the last time your boss told you he valued you?Read on then They are recruiting for a commercial gas engineer you will be:- Covering mostly Exeter to Plymouth in Devon Providing service, maintenance, repairs and some installation on commercial heating equipment and commercial boilers Also working on domestic gas and plumbing works Working with a variety of commercial client across the region such as schools, offices, factories and the NHS Skills Needed to be a commercial gas engineer Experience working commercial gas boilers and heating equipment needed Commercial gas certs needed Domestic gas certs and plumbing skills would also be needed OFTEC would be very beneficial Living in or around the Devon area - Exeter or Plymouth, or ideally in or around the Torquay area Salary and Benefits of a commercial gas engineer:- 45-50k basic salary Travel pay Van, Phone, Fuel card, specialist tools 24 days holiday + 8 bank holidays Call out rota of 1 in 8 weeks For an immediate interview contact Adam Southam In the event that you are contacted for a role, please note that as part of the registration process you shall be required to provide FRONTrunner Recruitment Ltd. with proof of identity as well as proof of eligibility to work in the United Kingdom.
Apr 22, 2026
Full time
This commercial heating company based in Devon have been trading for many years and count over 500 clients who use them on a yearly basis. They are family run and their biggest selling point is that they treat their 12 engineers like part of that family - you are a person, you are NEVER a number. You are valued when was the last time your boss told you he valued you?Read on then They are recruiting for a commercial gas engineer you will be:- Covering mostly Exeter to Plymouth in Devon Providing service, maintenance, repairs and some installation on commercial heating equipment and commercial boilers Also working on domestic gas and plumbing works Working with a variety of commercial client across the region such as schools, offices, factories and the NHS Skills Needed to be a commercial gas engineer Experience working commercial gas boilers and heating equipment needed Commercial gas certs needed Domestic gas certs and plumbing skills would also be needed OFTEC would be very beneficial Living in or around the Devon area - Exeter or Plymouth, or ideally in or around the Torquay area Salary and Benefits of a commercial gas engineer:- 45-50k basic salary Travel pay Van, Phone, Fuel card, specialist tools 24 days holiday + 8 bank holidays Call out rota of 1 in 8 weeks For an immediate interview contact Adam Southam In the event that you are contacted for a role, please note that as part of the registration process you shall be required to provide FRONTrunner Recruitment Ltd. with proof of identity as well as proof of eligibility to work in the United Kingdom.
Randstad Construction & Property
Inverness, Highland
Randstad C&P are seeking a skilled and reliable Mobile Commercial Gas Engineer to join our clients leading Facilities Management team. This role is focused on delivering high-quality planned and reactive maintenance across a portfolio of commercial contracts. The Benefits Salary 44,000 - 51,000 (depending on experience). Working Hours Monday to Friday, 8:00 am - 5:00 pm Annual Leave 33 days including bank Holidays. Overtime opportunities Company van and fuel card provided Generous company pension scheme Core Responsibilities Delivery of Planned Preventative Maintenance, proactive tasks, and reactive repairs on commercial combustion and HVAC systems. Carry out comprehensive servicing and safety inspections on commercial boilers, plant rooms, and industrial heating units to ensure peak performance and compliance. Perform detailed combustion analysis and flue gas testing to optimise burner efficiency and minimise environmental impact. General Building Services Manage a broad range of mechanical tasks, including plumbing, fabric maintenance, and general building services. Installations Execute both major and minor repairs and new installations to client gas and heating systems in strict compliance with safety standards. Experience & Qualifications Commercial Gas Qualifications Commercial Core Safety (COCN1 or CODNC1), TPCP1A, ICPN1, CORT1, CIGA1. Domestic Gas Qualifications CCN1, CENWAT1, CPA1. City & Guilds or NVQ Level 2/3 in Plumbing, HVAC, or Mechanical Engineering (Desired) Current Gas Safe Registration and valid IPAF / PASMA certifications. Full UK Driving Licence and eligibility to pass a DBS check. Interested? Apply with an up-to-date CV! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Apr 21, 2026
Full time
Randstad C&P are seeking a skilled and reliable Mobile Commercial Gas Engineer to join our clients leading Facilities Management team. This role is focused on delivering high-quality planned and reactive maintenance across a portfolio of commercial contracts. The Benefits Salary 44,000 - 51,000 (depending on experience). Working Hours Monday to Friday, 8:00 am - 5:00 pm Annual Leave 33 days including bank Holidays. Overtime opportunities Company van and fuel card provided Generous company pension scheme Core Responsibilities Delivery of Planned Preventative Maintenance, proactive tasks, and reactive repairs on commercial combustion and HVAC systems. Carry out comprehensive servicing and safety inspections on commercial boilers, plant rooms, and industrial heating units to ensure peak performance and compliance. Perform detailed combustion analysis and flue gas testing to optimise burner efficiency and minimise environmental impact. General Building Services Manage a broad range of mechanical tasks, including plumbing, fabric maintenance, and general building services. Installations Execute both major and minor repairs and new installations to client gas and heating systems in strict compliance with safety standards. Experience & Qualifications Commercial Gas Qualifications Commercial Core Safety (COCN1 or CODNC1), TPCP1A, ICPN1, CORT1, CIGA1. Domestic Gas Qualifications CCN1, CENWAT1, CPA1. City & Guilds or NVQ Level 2/3 in Plumbing, HVAC, or Mechanical Engineering (Desired) Current Gas Safe Registration and valid IPAF / PASMA certifications. Full UK Driving Licence and eligibility to pass a DBS check. Interested? Apply with an up-to-date CV! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
We are recruiting on behalf of a well-established commercial heating and building services contractor in Whyteleafe for a Scheduler/Contracts Administrator (Commercial Gas) to join their growing team. This is a key role within the business, supporting the smooth delivery of commercial gas services across a range of contracts. Location: Whyteleafe, Surrey Salary: Up to £33,000 DOE Hours: Monday Friday, 8am 5pm (overtime available) Benefits: 25 days holiday, free parking, modern working environment Key Responsibilities: Coordinate, schedule, and manage works for engineers Oversee job workflows from instruction through to completion Raise purchase orders, process invoices, and manage job costings Work with SORs (Schedule of Rates) and manage pricing variations Liaise with engineers, suppliers, and internal teams Maintain accurate job management system records Assist with compliance documentation and reporting The Ideal Candidate: Strong scheduling/admin experience from social housing, housing associations, or commercial maintenance sectors Background in repairs/maintenance contracts for housing or building services Familiarity with SORs, job costing, contract admin, or engineer coordination Excellent organisation and communication skills Commercial gas/heating/building services experience advantageous Ability to manage multiple deadlines in a busy environment Confident using Microsoft Office and job management software Why Join: Competitive salary and genuine opportunities for progression Supportive, close-knit team within a stable and expanding business Exposure to large-scale commercial contracts Interested? Apply now and we will be in touch to discuss your experience further! For your information: Interested? Please send you CV in as a Word format only Please only apply if you are already eligible to work in the UK (indefinitely & without sponsorship), Not for you but you know someone suitable? Take advantage of the YourRecruit paid referral fee Due to the large numbers of responses, we receive, despite our best efforts it is not possible to respond to every application. Therefore, only short-listed candidates will be contacted for this particular role and if you haven't heard from us within 7 days please assume you have been unsuccessful on this occasion. Please feel free however to apply for further roles and we will certainly keep your details on file and contact you with suitable vacancies. To stay safe in your job search we recommend that you visit JobsAware, a non-profit, joint industry and law enforcement organisation working to combat job scams. Visit the JobsAware website for information on common scams and to get free, expert advice for a safer job search.
Apr 21, 2026
Contractor
We are recruiting on behalf of a well-established commercial heating and building services contractor in Whyteleafe for a Scheduler/Contracts Administrator (Commercial Gas) to join their growing team. This is a key role within the business, supporting the smooth delivery of commercial gas services across a range of contracts. Location: Whyteleafe, Surrey Salary: Up to £33,000 DOE Hours: Monday Friday, 8am 5pm (overtime available) Benefits: 25 days holiday, free parking, modern working environment Key Responsibilities: Coordinate, schedule, and manage works for engineers Oversee job workflows from instruction through to completion Raise purchase orders, process invoices, and manage job costings Work with SORs (Schedule of Rates) and manage pricing variations Liaise with engineers, suppliers, and internal teams Maintain accurate job management system records Assist with compliance documentation and reporting The Ideal Candidate: Strong scheduling/admin experience from social housing, housing associations, or commercial maintenance sectors Background in repairs/maintenance contracts for housing or building services Familiarity with SORs, job costing, contract admin, or engineer coordination Excellent organisation and communication skills Commercial gas/heating/building services experience advantageous Ability to manage multiple deadlines in a busy environment Confident using Microsoft Office and job management software Why Join: Competitive salary and genuine opportunities for progression Supportive, close-knit team within a stable and expanding business Exposure to large-scale commercial contracts Interested? Apply now and we will be in touch to discuss your experience further! For your information: Interested? Please send you CV in as a Word format only Please only apply if you are already eligible to work in the UK (indefinitely & without sponsorship), Not for you but you know someone suitable? Take advantage of the YourRecruit paid referral fee Due to the large numbers of responses, we receive, despite our best efforts it is not possible to respond to every application. Therefore, only short-listed candidates will be contacted for this particular role and if you haven't heard from us within 7 days please assume you have been unsuccessful on this occasion. Please feel free however to apply for further roles and we will certainly keep your details on file and contact you with suitable vacancies. To stay safe in your job search we recommend that you visit JobsAware, a non-profit, joint industry and law enforcement organisation working to combat job scams. Visit the JobsAware website for information on common scams and to get free, expert advice for a safer job search.
Job Title : Pipefitter Location : Barrow, United Kingdom Salary & Shifts: Range of payrates based on shifts, full breakdown below Due to the role's requirements, you'll need an apprenticeship and must be eligible for UK Security clearance. Ready to take your skills to the next level with BAE Systems? Matchtech has partnered with BAE Systems , a leader in the Defence and Security sector, to find experienced Pipefitters to join their expanding team in Barrow-in-Furness This 12-month contract offers competitive rates for both local candidates and those willing to commute. It's a fantastic opportunity to be part of a cutting-edge project that's shaping the future of naval engineering. As a Pipefitter, you'll play a vital role within a specialist team, working on the latest generation of submarines , contributing to either the prestigious Astute or Dreadnought projects. What will I be doing? As a skilful Pipefitter , you'll shape essential piping and plumbing systems and make a real impact. To thrive in this role, you'll need experience in: Fabrication and Installation of Pipe Systems and Components, conducted in accordance with quality standards & regulatory requirements. Manufacturing to isometrics pipes/installing pipelines General Pipefitting/fabrication - Oil and Gas Working safely, complying with Health and Safety and other relevant regulations & guidelines. Following the relevant instructions, drawings and any other Quality Standards/Specifications. Pay rates BAE Systems offers a range of pay rates to contractors, depending on your shift allocation and travel distance to the Barrow site. Speak to our team to learn more about available shift options and payment options. For PAYE Contractors living within 39 miles of the Barrow base, please see the rates outlined below. Barrow Trades Local PAYE Barrow shift patterns Hourly Rate Hourly Holiday accrual or paid in advance Total hourly rate inclusive of holiday Standard shift 20.10 2.92 23.02 3 on 4 off 24.14 3.51 27.65 Night shift 26.73 3.89 30.62 Weekday & Saturday overtime 32.65 (inclusive of holiday) 32.65 (inclusive of holiday) Sunday overtime 43.54 (inclusive of holiday) 43.54 (inclusive of holiday) Non Local PAYE Barrow shift patterns Hourly Rate Hourly Holiday accrual or paid in advance Total hourly rate inclusive of holiday Standard shift 28.10 4.09 32.19 3 on 4 off 32.12 4.67 36.79 Night shift 34.73 5.05 39.78 Weekday & Saturday overtime 32.65 (inclusive of holiday) 32.65 (inclusive of holiday) Sunday overtime 43.54 (inclusive of holiday) 43.54 (inclusive of holiday) Why Choose BAE Systems? BAE Systems delivers some of the world's most advanced, technology-driven defence, aerospace, and security solutions, employing over 93,000 skilled professionals across approximately 40 countries. At the heart of BAE Systems is their purpose - to protect what matters. They make the future more secure for everyone by creating bold, pioneering security products and services that have the power to change the world. What's my next step? If you're interested in learning more, click "Apply" and share your CV. Our Defence team would love to hear from you and discuss the next steps
Apr 21, 2026
Contractor
Job Title : Pipefitter Location : Barrow, United Kingdom Salary & Shifts: Range of payrates based on shifts, full breakdown below Due to the role's requirements, you'll need an apprenticeship and must be eligible for UK Security clearance. Ready to take your skills to the next level with BAE Systems? Matchtech has partnered with BAE Systems , a leader in the Defence and Security sector, to find experienced Pipefitters to join their expanding team in Barrow-in-Furness This 12-month contract offers competitive rates for both local candidates and those willing to commute. It's a fantastic opportunity to be part of a cutting-edge project that's shaping the future of naval engineering. As a Pipefitter, you'll play a vital role within a specialist team, working on the latest generation of submarines , contributing to either the prestigious Astute or Dreadnought projects. What will I be doing? As a skilful Pipefitter , you'll shape essential piping and plumbing systems and make a real impact. To thrive in this role, you'll need experience in: Fabrication and Installation of Pipe Systems and Components, conducted in accordance with quality standards & regulatory requirements. Manufacturing to isometrics pipes/installing pipelines General Pipefitting/fabrication - Oil and Gas Working safely, complying with Health and Safety and other relevant regulations & guidelines. Following the relevant instructions, drawings and any other Quality Standards/Specifications. Pay rates BAE Systems offers a range of pay rates to contractors, depending on your shift allocation and travel distance to the Barrow site. Speak to our team to learn more about available shift options and payment options. For PAYE Contractors living within 39 miles of the Barrow base, please see the rates outlined below. Barrow Trades Local PAYE Barrow shift patterns Hourly Rate Hourly Holiday accrual or paid in advance Total hourly rate inclusive of holiday Standard shift 20.10 2.92 23.02 3 on 4 off 24.14 3.51 27.65 Night shift 26.73 3.89 30.62 Weekday & Saturday overtime 32.65 (inclusive of holiday) 32.65 (inclusive of holiday) Sunday overtime 43.54 (inclusive of holiday) 43.54 (inclusive of holiday) Non Local PAYE Barrow shift patterns Hourly Rate Hourly Holiday accrual or paid in advance Total hourly rate inclusive of holiday Standard shift 28.10 4.09 32.19 3 on 4 off 32.12 4.67 36.79 Night shift 34.73 5.05 39.78 Weekday & Saturday overtime 32.65 (inclusive of holiday) 32.65 (inclusive of holiday) Sunday overtime 43.54 (inclusive of holiday) 43.54 (inclusive of holiday) Why Choose BAE Systems? BAE Systems delivers some of the world's most advanced, technology-driven defence, aerospace, and security solutions, employing over 93,000 skilled professionals across approximately 40 countries. At the heart of BAE Systems is their purpose - to protect what matters. They make the future more secure for everyone by creating bold, pioneering security products and services that have the power to change the world. What's my next step? If you're interested in learning more, click "Apply" and share your CV. Our Defence team would love to hear from you and discuss the next steps
As a Consents Manager, you will be responsible for managing all aspects of consents and permissions required for Energy projects. This role will specifically focus on Development Consent Orders (DCOs) and Consents Management. Are you experienced in securing land rights and managing consents for infrastructure projects? Key Responsibilites Lead on securing land and property consents, including wayleaves, easements, leases, access rights, planning permissions, and land purchases. Support a range of infrastructure works covering underground, overhead, and ground-based installations across private and public land. Engage with key stakeholders, from landowners and agents to local authorities and external contractors. Ensure compliance with relevant legislation such as the Electricity Act 1989, planning rules, and land rights regulations. Manage claims and negotiations, including compensation for access, land use, and statutory notices. Oversee contractors and consultants who support the delivery of consents and land rights services. Keep accurate records and reports to support project progress and audit requirements. Work closely with project teams, including engineers, planners, legal advisors, and environmental consultants. Help improve internal processes, identifying opportunities to streamline and enhance how we manage consents. About you A background in utilities; electricity, water, gas, or infrastructure sectors. Proven experience in land rights, such as easements, access permissions, and statutory consents. Strong stakeholder skills: confident dealing with landowners, agents, councils, and contractors. Knowledge of UK land and planning laws, including the Electricity Act and other relevant regulations. Negotiation experience: able to secure agreements and resolve land-related issues. Project coordination: ability to work across multiple sites and disciplines. A full UK driving licence is essential for site visits and stakeholder meetings. Benefits A great salary, pension, healthcare and holiday allowance starting at 24-26 days per annum, we also offer perks including employee benefits programme with discounts for numerous well-known retailers such as Tesco, Sainsbury's, Currys PC World and Vue Cinemas, cycle to work scheme as well as an Employee Assistance Programme. What next? You apply, and we respond within 24 hours . Or to find out more give Ryan a call on (phone number removed) or email (url removed)
Apr 21, 2026
Full time
As a Consents Manager, you will be responsible for managing all aspects of consents and permissions required for Energy projects. This role will specifically focus on Development Consent Orders (DCOs) and Consents Management. Are you experienced in securing land rights and managing consents for infrastructure projects? Key Responsibilites Lead on securing land and property consents, including wayleaves, easements, leases, access rights, planning permissions, and land purchases. Support a range of infrastructure works covering underground, overhead, and ground-based installations across private and public land. Engage with key stakeholders, from landowners and agents to local authorities and external contractors. Ensure compliance with relevant legislation such as the Electricity Act 1989, planning rules, and land rights regulations. Manage claims and negotiations, including compensation for access, land use, and statutory notices. Oversee contractors and consultants who support the delivery of consents and land rights services. Keep accurate records and reports to support project progress and audit requirements. Work closely with project teams, including engineers, planners, legal advisors, and environmental consultants. Help improve internal processes, identifying opportunities to streamline and enhance how we manage consents. About you A background in utilities; electricity, water, gas, or infrastructure sectors. Proven experience in land rights, such as easements, access permissions, and statutory consents. Strong stakeholder skills: confident dealing with landowners, agents, councils, and contractors. Knowledge of UK land and planning laws, including the Electricity Act and other relevant regulations. Negotiation experience: able to secure agreements and resolve land-related issues. Project coordination: ability to work across multiple sites and disciplines. A full UK driving licence is essential for site visits and stakeholder meetings. Benefits A great salary, pension, healthcare and holiday allowance starting at 24-26 days per annum, we also offer perks including employee benefits programme with discounts for numerous well-known retailers such as Tesco, Sainsbury's, Currys PC World and Vue Cinemas, cycle to work scheme as well as an Employee Assistance Programme. What next? You apply, and we respond within 24 hours . Or to find out more give Ryan a call on (phone number removed) or email (url removed)
Field Service Engineer Commercial and Industrial Laundry Systems - Kent, Sussex, Surrey & London Maidstone, Royal Tunbridge Wells, Gravesend, Crawley, Dartford £36,000 Basic Salary (£39k if Commercial Gas) + £3k London Weighting + Vehicle + Overtime + Bonus + Benefits + Door-to-Door Pay Are you feeling a bit fed up where you are? Are you electrically smart and familiar in a field service role with 240v and 415v systems? Are you hands-on and customer focused? This company is seeking a hands-on individual who is confident using a multimeter for fault-finding and with some 3-phase knowledge. Attitude is more important than what you've worked on before within reason. Familiarity with service and repair of related equipment is required. Your Role as a Field Service Engineer: Based from home and covering a territory. Carrying out maintenance, repair, and service to a range of commercial laundry systems. Fault-finding with a multimeter and repairing accordingly. Customer base includes hotels, gyms, and care-homes, among others. Taking pride in your work and delivering good customer service. Predominantly a Mon - Fri role, 42 hours per week with overtime available and door-to-door pay. 1-in-4 weekend work and some nights away from home. The Ideal Background for Field Service Engineer: Current employees have come from a range of hands-on backgrounds including Armed Forces, domestic appliances, and field service on 3-phase, electrical equipment. Attitude, pride in work, and professionalism is more important than what you've done within reason. Commercial gas tickets would be advantageous and paid at an enhanced rate. You need to be electrically smart and able to use a multimeter. A customer service focused mindset. Happy in a field based position. Full UK driving licence Right to work in the UK indefinitely as no sponsorship will be provided. The Company recruiting for the Field Service Engineer: Over 50 years of industry knowledge and expertise, with heritage going back further still. A reputable manufacturer. Proud of their customer service offering and seeking likeminded engineers to help them grow. Longer term career prospects and opportunities for the right person, along with professional development. The Package for Field Service Engineer: £36,000 Basic Salary or £39,000 if holding commercial gas tickets. £3k London Weighting within M25 Overtime at 1.5x Mon-Sat, 2x on Sundays Paid door-to-door. Company van, tools, tablet, Pension (matched to 5%), Tools, Training, Phone, Tablet 28 days holiday + stats Please apply for this job online if you are interested and feel you fit the above criteria. Dave is the main point of contact for this role. INDENG
Apr 21, 2026
Full time
Field Service Engineer Commercial and Industrial Laundry Systems - Kent, Sussex, Surrey & London Maidstone, Royal Tunbridge Wells, Gravesend, Crawley, Dartford £36,000 Basic Salary (£39k if Commercial Gas) + £3k London Weighting + Vehicle + Overtime + Bonus + Benefits + Door-to-Door Pay Are you feeling a bit fed up where you are? Are you electrically smart and familiar in a field service role with 240v and 415v systems? Are you hands-on and customer focused? This company is seeking a hands-on individual who is confident using a multimeter for fault-finding and with some 3-phase knowledge. Attitude is more important than what you've worked on before within reason. Familiarity with service and repair of related equipment is required. Your Role as a Field Service Engineer: Based from home and covering a territory. Carrying out maintenance, repair, and service to a range of commercial laundry systems. Fault-finding with a multimeter and repairing accordingly. Customer base includes hotels, gyms, and care-homes, among others. Taking pride in your work and delivering good customer service. Predominantly a Mon - Fri role, 42 hours per week with overtime available and door-to-door pay. 1-in-4 weekend work and some nights away from home. The Ideal Background for Field Service Engineer: Current employees have come from a range of hands-on backgrounds including Armed Forces, domestic appliances, and field service on 3-phase, electrical equipment. Attitude, pride in work, and professionalism is more important than what you've done within reason. Commercial gas tickets would be advantageous and paid at an enhanced rate. You need to be electrically smart and able to use a multimeter. A customer service focused mindset. Happy in a field based position. Full UK driving licence Right to work in the UK indefinitely as no sponsorship will be provided. The Company recruiting for the Field Service Engineer: Over 50 years of industry knowledge and expertise, with heritage going back further still. A reputable manufacturer. Proud of their customer service offering and seeking likeminded engineers to help them grow. Longer term career prospects and opportunities for the right person, along with professional development. The Package for Field Service Engineer: £36,000 Basic Salary or £39,000 if holding commercial gas tickets. £3k London Weighting within M25 Overtime at 1.5x Mon-Sat, 2x on Sundays Paid door-to-door. Company van, tools, tablet, Pension (matched to 5%), Tools, Training, Phone, Tablet 28 days holiday + stats Please apply for this job online if you are interested and feel you fit the above criteria. Dave is the main point of contact for this role. INDENG
Commercial Gas Engineer- London- £50,000- £57,000 Per Annum £50,000 - £57,000 per annum (DOE) + Overtime Available Full-time, Permanent London- travel across client sites required Overtime opportunities. Company vehicle, fuel card, and mobile phone. Training and career progression opportunities. Commercial Gas Engineer Overview: Our client, a leading provider of commercial energy and facilities services in London is looking for an experienced Commercial Gas Engineer to join their team. This is a fantastic opportunity for a qualified engineer to work across a range of commercial sites, carrying out installations, servicing, and maintenance. Commercial Gas Engineer Key Responsibilities: Install, service, and maintain commercial gas systems and appliances. Conduct gas safety inspections and issue certificates. Diagnose faults and implement effective solutions on site. Keep accurate service records and ensure compliance with Gas Safe and HSE regulations. Work professionally with clients, contractors, and colleagues. Commercial Gas Engineer Skills & Experience Required: Full Gas Safe Register accreditation for commercial work. Proven experience as a commercial gas engineer. Strong understanding of UK gas safety and health & safety regulations. Excellent diagnostic and problem solving abilities. Professional, customer focused approach. Ability to work independently across multiple sites. DON'T MISS OUT ON THIS EXCELLENT OPPORTUNITY - APPLY NOW! Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful.
Apr 21, 2026
Full time
Commercial Gas Engineer- London- £50,000- £57,000 Per Annum £50,000 - £57,000 per annum (DOE) + Overtime Available Full-time, Permanent London- travel across client sites required Overtime opportunities. Company vehicle, fuel card, and mobile phone. Training and career progression opportunities. Commercial Gas Engineer Overview: Our client, a leading provider of commercial energy and facilities services in London is looking for an experienced Commercial Gas Engineer to join their team. This is a fantastic opportunity for a qualified engineer to work across a range of commercial sites, carrying out installations, servicing, and maintenance. Commercial Gas Engineer Key Responsibilities: Install, service, and maintain commercial gas systems and appliances. Conduct gas safety inspections and issue certificates. Diagnose faults and implement effective solutions on site. Keep accurate service records and ensure compliance with Gas Safe and HSE regulations. Work professionally with clients, contractors, and colleagues. Commercial Gas Engineer Skills & Experience Required: Full Gas Safe Register accreditation for commercial work. Proven experience as a commercial gas engineer. Strong understanding of UK gas safety and health & safety regulations. Excellent diagnostic and problem solving abilities. Professional, customer focused approach. Ability to work independently across multiple sites. DON'T MISS OUT ON THIS EXCELLENT OPPORTUNITY - APPLY NOW! Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful.
Field Service Engineer Commercial and Industrial Laundry Systems - Northern / North-Western M25 & London Watford, Harrow, Uxbridge, Kingston-upon-Thames, Slough, St. Albans, Enfield, Luton £36,000 Basic Salary (£39k if Commercial Gas) + £3k London Weighting + Vehicle + Overtime + Bonus + Benefits + Door-to-Door Pay Are you feeling a bit fed up where you are? Are you electrically smart and familiar in a field service role with 240v and 415v systems? Are you hands-on and customer focused? This company is seeking a hands-on individual who is confident using a multimeter for fault-finding and with some 3-phase knowledge. Attitude is more important than what you've worked on before within reason. Familiarity with service and repair of related equipment is required. Your Role as a Field Service Engineer: Based from home and covering a territory. Carrying out maintenance, repair, and service to a range of commercial laundry systems. Fault-finding with a multimeter and repairing accordingly. Customer base includes hotels, gyms, and care-homes, among others. Taking pride in your work and delivering good customer service. Predominantly a Mon - Fri role, 42 hours per week with overtime available and door-to-door pay. 1-in-4 weekend work and some nights away from home. The Ideal Background for Field Service Engineer: Current employees have come from a range of hands-on backgrounds including Armed Forces, domestic appliances, and field service on 3-phase, electrical equipment. Attitude, pride in work, and professionalism is more important than what you've done within reason. Commercial gas tickets would be advantageous and paid at an enhanced rate. You need to be electrically smart and able to use a multimeter. A customer service focused mindset. Happy in a field based position. Full UK driving licence Right to work in the UK indefinitely as no sponsorship will be provided. The Company recruiting for the Field Service Engineer: Over 50 years of industry knowledge and expertise, with heritage going back further still. A reputable manufacturer. Proud of their customer service offering and seeking likeminded engineers to help them grow. Longer term career prospects and opportunities for the right person, along with professional development. The Package for Field Service Engineer: £36,000 Basic Salary or £39,000 if holding commercial gas tickets. £3k London Weighting within M25 Overtime at 1.5x Mon-Sat, 2x on Sundays Paid door-to-door. Company van, tools, tablet, Pension (matched to 5%), Tools, Training, Phone, Tablet 28 days holiday + stats Please apply for this job online if you are interested and feel you fit the above criteria. Dave is the main point of contact for this role. INDENG
Apr 21, 2026
Full time
Field Service Engineer Commercial and Industrial Laundry Systems - Northern / North-Western M25 & London Watford, Harrow, Uxbridge, Kingston-upon-Thames, Slough, St. Albans, Enfield, Luton £36,000 Basic Salary (£39k if Commercial Gas) + £3k London Weighting + Vehicle + Overtime + Bonus + Benefits + Door-to-Door Pay Are you feeling a bit fed up where you are? Are you electrically smart and familiar in a field service role with 240v and 415v systems? Are you hands-on and customer focused? This company is seeking a hands-on individual who is confident using a multimeter for fault-finding and with some 3-phase knowledge. Attitude is more important than what you've worked on before within reason. Familiarity with service and repair of related equipment is required. Your Role as a Field Service Engineer: Based from home and covering a territory. Carrying out maintenance, repair, and service to a range of commercial laundry systems. Fault-finding with a multimeter and repairing accordingly. Customer base includes hotels, gyms, and care-homes, among others. Taking pride in your work and delivering good customer service. Predominantly a Mon - Fri role, 42 hours per week with overtime available and door-to-door pay. 1-in-4 weekend work and some nights away from home. The Ideal Background for Field Service Engineer: Current employees have come from a range of hands-on backgrounds including Armed Forces, domestic appliances, and field service on 3-phase, electrical equipment. Attitude, pride in work, and professionalism is more important than what you've done within reason. Commercial gas tickets would be advantageous and paid at an enhanced rate. You need to be electrically smart and able to use a multimeter. A customer service focused mindset. Happy in a field based position. Full UK driving licence Right to work in the UK indefinitely as no sponsorship will be provided. The Company recruiting for the Field Service Engineer: Over 50 years of industry knowledge and expertise, with heritage going back further still. A reputable manufacturer. Proud of their customer service offering and seeking likeminded engineers to help them grow. Longer term career prospects and opportunities for the right person, along with professional development. The Package for Field Service Engineer: £36,000 Basic Salary or £39,000 if holding commercial gas tickets. £3k London Weighting within M25 Overtime at 1.5x Mon-Sat, 2x on Sundays Paid door-to-door. Company van, tools, tablet, Pension (matched to 5%), Tools, Training, Phone, Tablet 28 days holiday + stats Please apply for this job online if you are interested and feel you fit the above criteria. Dave is the main point of contact for this role. INDENG
WTG Package Manager for a major offshore wind project in The United Kingdom Responsibilities Provides HSSE leadership and ensures that HSSE is managed throughout the package by all team members and contract partners in accordance with the company's established HSSE principles; Lead a team of experts assigned to the package and promotes a collaborative, transparent and supportive culture within the package and their interaction with other project roles; Manage the package in accordance with the company's essential behaviours, established standards for project management, quality and within the project's Delegation of Authority; Ensure clear lines of communication internally and with external contract partners; Oversee the engineering process and ensures that safety in design and operational aspects are adequately considered. Oversee the procurement process (tender, supplier selection and contract negotiation) until contract signature. Manages the overall package budget. Identify and manage package risks and opportunities. ensures compliance with internal policies and external legislation. Qualifications and Experience Engineering degree from an accredited university in a relevant subject (Civil, Structural, Mechanical, Ocean, Naval, etc); Circa 10 years relevant industry experience; Professional Engineer / Project Manager, with experience managing design and or engineering teams; Experience in Offshore Wind, Onshore Wind, Offshore Oil and Gas, or other large engineering infrastructure projects; Proven experience in major contract negotiations and contract management of large infrastructure projects (ideally offshore wind);
Apr 21, 2026
Contractor
WTG Package Manager for a major offshore wind project in The United Kingdom Responsibilities Provides HSSE leadership and ensures that HSSE is managed throughout the package by all team members and contract partners in accordance with the company's established HSSE principles; Lead a team of experts assigned to the package and promotes a collaborative, transparent and supportive culture within the package and their interaction with other project roles; Manage the package in accordance with the company's essential behaviours, established standards for project management, quality and within the project's Delegation of Authority; Ensure clear lines of communication internally and with external contract partners; Oversee the engineering process and ensures that safety in design and operational aspects are adequately considered. Oversee the procurement process (tender, supplier selection and contract negotiation) until contract signature. Manages the overall package budget. Identify and manage package risks and opportunities. ensures compliance with internal policies and external legislation. Qualifications and Experience Engineering degree from an accredited university in a relevant subject (Civil, Structural, Mechanical, Ocean, Naval, etc); Circa 10 years relevant industry experience; Professional Engineer / Project Manager, with experience managing design and or engineering teams; Experience in Offshore Wind, Onshore Wind, Offshore Oil and Gas, or other large engineering infrastructure projects; Proven experience in major contract negotiations and contract management of large infrastructure projects (ideally offshore wind);
Commercial Gas Engineer- Birmingham- £40,000-£50,000 Per Annum £40,000 - £50,000 per annum (DOE) + Overtime Available Full-time, Permanent Birmingham- travel across client sites required Overtime opportunities. Company vehicle, fuel card, and mobile phone. Training and career progression opportunities. Commercial Gas Engineer Overview: Our client, a leading provider of commercial energy and facilities services in Birmingham is looking for an experienced Commercial Gas Engineer to join their team. This is a fantastic opportunity for a qualified engineer to work across a range of commercial sites, carrying out installations, servicing, and maintenance. Commercial Gas Engineer Key Responsibilities: Install, service, and maintain commercial gas systems and appliances. Conduct gas safety inspections and issue certificates. Diagnose faults and implement effective solutions on site. Keep accurate service records and ensure compliance with Gas Safe and HSE regulations. Work professionally with clients, contractors, and colleagues. Commercial Gas Engineer Skills & Experience Required: Full Gas Safe Register accreditation for commercial work. Proven experience as a commercial gas engineer. Strong understanding of UK gas safety and health & safety regulations. Excellent diagnostic and problem solving abilities. Professional, customer focused approach. Ability to work independently across multiple sites. DON'T MISS OUT ON THIS EXCELLENT OPPORTUNITY - APPLY NOW! Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful.
Apr 21, 2026
Full time
Commercial Gas Engineer- Birmingham- £40,000-£50,000 Per Annum £40,000 - £50,000 per annum (DOE) + Overtime Available Full-time, Permanent Birmingham- travel across client sites required Overtime opportunities. Company vehicle, fuel card, and mobile phone. Training and career progression opportunities. Commercial Gas Engineer Overview: Our client, a leading provider of commercial energy and facilities services in Birmingham is looking for an experienced Commercial Gas Engineer to join their team. This is a fantastic opportunity for a qualified engineer to work across a range of commercial sites, carrying out installations, servicing, and maintenance. Commercial Gas Engineer Key Responsibilities: Install, service, and maintain commercial gas systems and appliances. Conduct gas safety inspections and issue certificates. Diagnose faults and implement effective solutions on site. Keep accurate service records and ensure compliance with Gas Safe and HSE regulations. Work professionally with clients, contractors, and colleagues. Commercial Gas Engineer Skills & Experience Required: Full Gas Safe Register accreditation for commercial work. Proven experience as a commercial gas engineer. Strong understanding of UK gas safety and health & safety regulations. Excellent diagnostic and problem solving abilities. Professional, customer focused approach. Ability to work independently across multiple sites. DON'T MISS OUT ON THIS EXCELLENT OPPORTUNITY - APPLY NOW! Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful.
