Lead Fire Engineer Looking for an experienced Fire Alarm Systems Engineer with excellent knowledge of systems in blocks of flats. This role is to support systems in large residential blocks across the SE London area. In addition to undertaking Service Calls, PPM's, and reactive maintenance visits, you will train, mentor and act as a technical escalation point for more junior Fire Alarm Field Service Engineers. Package is £42- £45000 + business use company van with all travel, parking costs etc met. This is a Full time PAYE permanent position with paid holiday, pension, and plenty of overtime opportunity if desired. Applicants for this role must have worked in a similar Fire Alarm Servicing position and hold a full manual driver's licence. As this role is focused on supporting systems installed in buildings around the SE post code area; applicants should be located within a reasonable drive: BR / SE / DA post codes, North Kent, or local towns like Croydon.
Apr 25, 2026
Full time
Lead Fire Engineer Looking for an experienced Fire Alarm Systems Engineer with excellent knowledge of systems in blocks of flats. This role is to support systems in large residential blocks across the SE London area. In addition to undertaking Service Calls, PPM's, and reactive maintenance visits, you will train, mentor and act as a technical escalation point for more junior Fire Alarm Field Service Engineers. Package is £42- £45000 + business use company van with all travel, parking costs etc met. This is a Full time PAYE permanent position with paid holiday, pension, and plenty of overtime opportunity if desired. Applicants for this role must have worked in a similar Fire Alarm Servicing position and hold a full manual driver's licence. As this role is focused on supporting systems installed in buildings around the SE post code area; applicants should be located within a reasonable drive: BR / SE / DA post codes, North Kent, or local towns like Croydon.
# Senior Testing Rigs & Labs TechnicianMechanical Engineering Job DetailsLocationAbingdon, United KingdomEmployment TypeFull-timeSalary£43kLevelIndividual ContributorPosted# Senior Testing Rigs & Labs Technician Overview of ResponsibilitiesThe salary for this role is £ 43,702 (inclusive of a Specialist Allowance) . Onsite working is expected for 5 days each week. This role can be based at any of the following sites; Culham, Oxfordshire This role requires employees to complete an online Baseline Personnel Security Standard (BPSS), including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open source data. The Role We are seeking a Senior Testing Rigs & Labs Technician to provide advanced hands on technical support within our experimental laboratories.In this role, you will play a key part in building, operating and maintaining testing rigs and laboratory systems that support prototype development and experimental programmes. You will work closely with engineers, scientists and other technicians, applying practical expertise to ensure experiments are delivered safely, efficiently and to a high technical standard.You will act as a subject matter specialist in defined areas of laboratory practice, take ownership of discrete work activities, and support the development of junior technicians and apprentices. Key Responsibilities: Carry out hands on laboratory and experimental work, including fabrication, assembly, integration, commissioning, operation and decommissioning of testing rigs and equipment Support the safe and effective day to day operation of testing rigs and laboratory facilities Apply practical expertise to translate drawings, schematics and test plans into robust physical setups Identify and resolve technical issues during builds and experimental operations, escalating novel or higher risk problems as required Contribute to risk assessments, method statements and safe systems of work within laboratory environments Take responsibility for defined operational areas such as tooling, consumables, equipment organisation or calibration coordination Maintain accurate records for equipment status, servicing, calibration and experimental activities Support the collection, handling and basic processing of experimental data Contribute practical input to experimental planning, design reviews and operational improvement activities Coach and support junior technicians and apprentices, promoting good laboratory practice and safe working Work collaboratively with engineers and stakeholders, communicating clearly and professionallySalary£43,702 (inclusive of Specialist Allowance) + excellent benefits including outstanding pensionProgrammeDepartmentTechnology DepartmentDisciplineSite LocationType of EmploymentFull-timeReference NumberREF4129N Qualifications Essential Requirements: Relevant technical qualification in a STEM discipline (e.g. HNC/HND or equivalent experience) Proven hands on experience in laboratory, workshop, prototype or experimental test environments Strong mechanical and/or electrical skills, with the ability to work confidently from technical drawings and documentation Experience assembling, commissioning, operating or maintaining test rigs or experimental equipment Awareness of laboratory hazards (e.g. pressure, vacuum, cryogenic, high voltage systems) and safe working practices Experience contributing to risk assessments and safety documentation Ability to work independently within established procedures and manage competing tasks Clear written and verbal communication skills Experience supporting or guiding less experienced colleagues Desirable Requirements: Degree in engineering or a related discipline Experience supporting R&D or novel technology programmes Familiarity with instrumentation, control systems or data acquisition Experience contributing to laboratory improvements, equipment upgrades or facility development Knowledge of laboratory compliance frameworks (e.g. COSHH, PUWER or similar) Additional information: This role involves regular hands on work in laboratory and workshop environments Additional InformationA full list of our benefits can be found hereUKAEA's mission is clean energy for all, and we welcome talented people from all backgrounds to help us achieve this goal. We are committed to equality, diversity, and inclusion and strive to ensure fair representation across our workforce. We particularly encourage applications from groups currently underrepresented in STEM, including women and individuals from diverse ethnic backgrounds, while ensuring all appointments are made on merit.UK Atomic Energy Authority is committed to being accessible. Please email if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks but may close earlier if we receive a large number of applications. Get Fusion Job AlertsNew fusion energy jobs delivered to your inbox.LocationAbingdon, United Kingdom
Apr 25, 2026
Full time
# Senior Testing Rigs & Labs TechnicianMechanical Engineering Job DetailsLocationAbingdon, United KingdomEmployment TypeFull-timeSalary£43kLevelIndividual ContributorPosted# Senior Testing Rigs & Labs Technician Overview of ResponsibilitiesThe salary for this role is £ 43,702 (inclusive of a Specialist Allowance) . Onsite working is expected for 5 days each week. This role can be based at any of the following sites; Culham, Oxfordshire This role requires employees to complete an online Baseline Personnel Security Standard (BPSS), including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open source data. The Role We are seeking a Senior Testing Rigs & Labs Technician to provide advanced hands on technical support within our experimental laboratories.In this role, you will play a key part in building, operating and maintaining testing rigs and laboratory systems that support prototype development and experimental programmes. You will work closely with engineers, scientists and other technicians, applying practical expertise to ensure experiments are delivered safely, efficiently and to a high technical standard.You will act as a subject matter specialist in defined areas of laboratory practice, take ownership of discrete work activities, and support the development of junior technicians and apprentices. Key Responsibilities: Carry out hands on laboratory and experimental work, including fabrication, assembly, integration, commissioning, operation and decommissioning of testing rigs and equipment Support the safe and effective day to day operation of testing rigs and laboratory facilities Apply practical expertise to translate drawings, schematics and test plans into robust physical setups Identify and resolve technical issues during builds and experimental operations, escalating novel or higher risk problems as required Contribute to risk assessments, method statements and safe systems of work within laboratory environments Take responsibility for defined operational areas such as tooling, consumables, equipment organisation or calibration coordination Maintain accurate records for equipment status, servicing, calibration and experimental activities Support the collection, handling and basic processing of experimental data Contribute practical input to experimental planning, design reviews and operational improvement activities Coach and support junior technicians and apprentices, promoting good laboratory practice and safe working Work collaboratively with engineers and stakeholders, communicating clearly and professionallySalary£43,702 (inclusive of Specialist Allowance) + excellent benefits including outstanding pensionProgrammeDepartmentTechnology DepartmentDisciplineSite LocationType of EmploymentFull-timeReference NumberREF4129N Qualifications Essential Requirements: Relevant technical qualification in a STEM discipline (e.g. HNC/HND or equivalent experience) Proven hands on experience in laboratory, workshop, prototype or experimental test environments Strong mechanical and/or electrical skills, with the ability to work confidently from technical drawings and documentation Experience assembling, commissioning, operating or maintaining test rigs or experimental equipment Awareness of laboratory hazards (e.g. pressure, vacuum, cryogenic, high voltage systems) and safe working practices Experience contributing to risk assessments and safety documentation Ability to work independently within established procedures and manage competing tasks Clear written and verbal communication skills Experience supporting or guiding less experienced colleagues Desirable Requirements: Degree in engineering or a related discipline Experience supporting R&D or novel technology programmes Familiarity with instrumentation, control systems or data acquisition Experience contributing to laboratory improvements, equipment upgrades or facility development Knowledge of laboratory compliance frameworks (e.g. COSHH, PUWER or similar) Additional information: This role involves regular hands on work in laboratory and workshop environments Additional InformationA full list of our benefits can be found hereUKAEA's mission is clean energy for all, and we welcome talented people from all backgrounds to help us achieve this goal. We are committed to equality, diversity, and inclusion and strive to ensure fair representation across our workforce. We particularly encourage applications from groups currently underrepresented in STEM, including women and individuals from diverse ethnic backgrounds, while ensuring all appointments are made on merit.UK Atomic Energy Authority is committed to being accessible. Please email if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks but may close earlier if we receive a large number of applications. Get Fusion Job AlertsNew fusion energy jobs delivered to your inbox.LocationAbingdon, United Kingdom
Job Title: Senior Project Planner Location: Ashton Vale, Bristol + Hybrid Working Arrangements Compensation: Competitive Salary + Benefits Role Type: Full time / Permanent Role ID: SF71279 At Babcock, we're working to create a safe and secure world, together. If you join us, you can play your part as a Senior Project Planner at Ashton House, near Bristol. The Role As a Senior Project Planner, you'll play a crucial role in delivering complex defence and engineering projects that help safeguard national security. This is your opportunity to influence high profile programmes within our Mission Systems business, a team recognised for innovative design, precision engineering and equipment support for customers in the UK and around the world. Your work will directly shape how we plan, manage and deliver major submarine and technology projects. You'll be central to driving performance, improving schedule accuracy, and ensuring integrated plans deliver on time, to cost and to quality. It's a chance to refine your planning expertise, grow your leadership capability, and develop a rewarding career in defence, aerospace and engineering. Day to day, you'll be required to: Develop and lead the creation of fully integrated project schedules that drive effective delivery. Engage with Project Managers, Control Account Managers and customers to ensure plans reflect scope, progress and priorities. Analyse performance, including scenario planning, baseline variations and earned value metrics. Maintain governance artefacts, ensuring schedules align with project management and schedule management plans. Support and collaborate within the wider Planning Discipline, contributing to best practice and future capability. This role is full time, 37 hours per week and provides hybrid working arrangements with days onsite and days working from home. Essential Experience of the Senior Project Planner Proficient in Primavera P6 and Microsoft Project. Strong written and verbal communication skills. Excellent analytical, organisational and time management abilities. Experience within a similar project planning environment. Comfortable working with governance artefacts and supporting junior team members. Qualifications for the Senior Project Planner Essential: No formal qualifications required. Desirable: Experience of Quantitative Schedule Risk Analysis. Relevant industry training or professional development in project planning. Security Clearance The successful candidate must be able to achieve and maintain Security Check (SC) security clearance for this role. You will be eligible to start on Standard (BPSS) security clearance, but you will need to obtain Security Check (SC) once in post. Many of the positions within our company are subject to national security clearance and Trade Control restrictions. This means that your eligibility for certain roles may be affected by your place of birth, nationality, current or former citizenship, and any residency you hold or have held. Further details are available at United Kingdom Security Vetting: clearance levels - GOV.UK (). What We Offer Generous holiday allowance Matched contribution pension scheme, with life assurance Access to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+ Employee share scheme Employee shopping savings portal Payment of Professional Fees Reservists in the armed forces receive 10 days special paid leave Holiday Trading is a benefit that allows UK Babcock employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement. There is an annual Window to request this benefit. "Be Kind Day" enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity Excellent development opportunities and benefits package including an employee assistance programme supporting physical, mental and financial wellbeing. We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please email with the subject header 'Reasonable adjustments requirement'. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview.
Apr 25, 2026
Full time
Job Title: Senior Project Planner Location: Ashton Vale, Bristol + Hybrid Working Arrangements Compensation: Competitive Salary + Benefits Role Type: Full time / Permanent Role ID: SF71279 At Babcock, we're working to create a safe and secure world, together. If you join us, you can play your part as a Senior Project Planner at Ashton House, near Bristol. The Role As a Senior Project Planner, you'll play a crucial role in delivering complex defence and engineering projects that help safeguard national security. This is your opportunity to influence high profile programmes within our Mission Systems business, a team recognised for innovative design, precision engineering and equipment support for customers in the UK and around the world. Your work will directly shape how we plan, manage and deliver major submarine and technology projects. You'll be central to driving performance, improving schedule accuracy, and ensuring integrated plans deliver on time, to cost and to quality. It's a chance to refine your planning expertise, grow your leadership capability, and develop a rewarding career in defence, aerospace and engineering. Day to day, you'll be required to: Develop and lead the creation of fully integrated project schedules that drive effective delivery. Engage with Project Managers, Control Account Managers and customers to ensure plans reflect scope, progress and priorities. Analyse performance, including scenario planning, baseline variations and earned value metrics. Maintain governance artefacts, ensuring schedules align with project management and schedule management plans. Support and collaborate within the wider Planning Discipline, contributing to best practice and future capability. This role is full time, 37 hours per week and provides hybrid working arrangements with days onsite and days working from home. Essential Experience of the Senior Project Planner Proficient in Primavera P6 and Microsoft Project. Strong written and verbal communication skills. Excellent analytical, organisational and time management abilities. Experience within a similar project planning environment. Comfortable working with governance artefacts and supporting junior team members. Qualifications for the Senior Project Planner Essential: No formal qualifications required. Desirable: Experience of Quantitative Schedule Risk Analysis. Relevant industry training or professional development in project planning. Security Clearance The successful candidate must be able to achieve and maintain Security Check (SC) security clearance for this role. You will be eligible to start on Standard (BPSS) security clearance, but you will need to obtain Security Check (SC) once in post. Many of the positions within our company are subject to national security clearance and Trade Control restrictions. This means that your eligibility for certain roles may be affected by your place of birth, nationality, current or former citizenship, and any residency you hold or have held. Further details are available at United Kingdom Security Vetting: clearance levels - GOV.UK (). What We Offer Generous holiday allowance Matched contribution pension scheme, with life assurance Access to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+ Employee share scheme Employee shopping savings portal Payment of Professional Fees Reservists in the armed forces receive 10 days special paid leave Holiday Trading is a benefit that allows UK Babcock employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement. There is an annual Window to request this benefit. "Be Kind Day" enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity Excellent development opportunities and benefits package including an employee assistance programme supporting physical, mental and financial wellbeing. We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please email with the subject header 'Reasonable adjustments requirement'. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview.
Senior Quality Inspector (CMM / Metrology) -Permanent, Days. Want a quality role that actually uses your full skillset? If you're a strong CMM Inspector who enjoys variety (not being stuck in a booth), wants access to high-spec kit, and likes being the go-to person for GD&T, problem-solving and mentoring - this is built for you. You'll split your time between advanced CMM inspection/programming and hands-on bench metrology, with full software training available on the CMM. About the role We're looking for a versatile Senior Quality Inspector to join our precision engineering team, verifying complex, tight-tolerance components and supporting shop-floor process stability. You'll also help develop less experienced inspectors and drive best practice across inspection. Key responsibilities Perform high-level inspection using CMM's . Program/run CMM routines and interpret results to support right-first-time quality. Conduct manual/bench inspections using micrometers (external/internal/depth), digital height gauges, surface finish testers, bore gauges and thread measurement tools. Create and verify First Article Inspection Reports (FAIRs) to AS9102. Produce clear inspection reports and maintain robust quality records. Liaise with the machine shop to resolve dimensional issues and improve process stability. Mentor/train junior inspectors in CMM and manual measurement techniques. Candidate requirements Essential: Hands-on CMM inspection experience in an ISO-regulated environment (ISO 9001, AS9100, or equivalent). Essential: Strong GD&T and ability to interpret complex engineering drawings. Essential: CMM programming experience and confidence learning/using 3D metrology software. Strong, practical manual metrology skills with a "shop floor + lab" mindset. This is a permanent job with a recognised employer of choice. You must have current UK right to work to be considered. HRGO are a recruitment agency supporting UK Manufacturing. We aim to respond to all applications.
Apr 25, 2026
Full time
Senior Quality Inspector (CMM / Metrology) -Permanent, Days. Want a quality role that actually uses your full skillset? If you're a strong CMM Inspector who enjoys variety (not being stuck in a booth), wants access to high-spec kit, and likes being the go-to person for GD&T, problem-solving and mentoring - this is built for you. You'll split your time between advanced CMM inspection/programming and hands-on bench metrology, with full software training available on the CMM. About the role We're looking for a versatile Senior Quality Inspector to join our precision engineering team, verifying complex, tight-tolerance components and supporting shop-floor process stability. You'll also help develop less experienced inspectors and drive best practice across inspection. Key responsibilities Perform high-level inspection using CMM's . Program/run CMM routines and interpret results to support right-first-time quality. Conduct manual/bench inspections using micrometers (external/internal/depth), digital height gauges, surface finish testers, bore gauges and thread measurement tools. Create and verify First Article Inspection Reports (FAIRs) to AS9102. Produce clear inspection reports and maintain robust quality records. Liaise with the machine shop to resolve dimensional issues and improve process stability. Mentor/train junior inspectors in CMM and manual measurement techniques. Candidate requirements Essential: Hands-on CMM inspection experience in an ISO-regulated environment (ISO 9001, AS9100, or equivalent). Essential: Strong GD&T and ability to interpret complex engineering drawings. Essential: CMM programming experience and confidence learning/using 3D metrology software. Strong, practical manual metrology skills with a "shop floor + lab" mindset. This is a permanent job with a recognised employer of choice. You must have current UK right to work to be considered. HRGO are a recruitment agency supporting UK Manufacturing. We aim to respond to all applications.
Senior Structural Engineer Nottingham City Centre This is a strong opportunity for a Senior Structural Engineer to join a well-established, independent Engineering Consultancy based in Nottingham. With over 30 years in the market, the business has built a reputation for delivering innovative, practical and buildable engineering solutions, with client care genuinely at the heart of everything they do. Operating as a fully integrated consultancy, they work across Civil and Structural Engineering, Environmental, Geotechnical, Highways and Transport. Their project portfolio is broad, covering residential, commercial, industrial, education, public sector, retail, leisure and specialist sectors such as student accommodation and waste to energy, giving you a really varied workload. What sets them apart is how they deliver projects. They work in small, close-knit teams with hands-on Associates leading schemes from start to finish, providing a consistent point of contact and a genuinely personal service to clients. This approach has resulted in a high level of repeat business and long-standing client relationships, giving the business a stable and secure pipeline of work. They are now looking to bring in a Senior Structural Engineer with around 5+ years' post-graduate experience who is ambitious, motivated and keen to continue developing. This is very much a role where you'll be supported, but also trusted to take ownership and grow into a key member of the team. In this position, you'll be involved in the design and delivery of structural projects across a range of materials including steel, reinforced concrete, masonry and timber, covering both new build and refurbishment schemes. You'll play a key role in developing practical, efficient solutions, working closely with both civil and structural colleagues to deliver coordinated designs from concept through to construction. You'll also support junior engineers, contribute to maintaining high technical standards and be involved in client interaction, helping to build and maintain relationships. The business places a strong emphasis on development, offering structured progression, regular reviews and ongoing CPD to help you move your career forward. Culturally, this is a business that values its people. With low staff turnover, long average tenure and a collaborative working environment, it offers a stable platform for someone looking to progress without the usual corporate layers. Decisions are made quickly, teams are empowered and you'll have the opportunity to genuinely influence both projects and your own development. This is a great opportunity to join a Consultancy where you can take real ownership of your work, be part of a close-knit team and continue building your career within a supportive and forward-thinking environment. For more information about this role, or to discuss similar opportunities, please contact Sam at Calibre Search, or click apply now. Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business.
Apr 25, 2026
Full time
Senior Structural Engineer Nottingham City Centre This is a strong opportunity for a Senior Structural Engineer to join a well-established, independent Engineering Consultancy based in Nottingham. With over 30 years in the market, the business has built a reputation for delivering innovative, practical and buildable engineering solutions, with client care genuinely at the heart of everything they do. Operating as a fully integrated consultancy, they work across Civil and Structural Engineering, Environmental, Geotechnical, Highways and Transport. Their project portfolio is broad, covering residential, commercial, industrial, education, public sector, retail, leisure and specialist sectors such as student accommodation and waste to energy, giving you a really varied workload. What sets them apart is how they deliver projects. They work in small, close-knit teams with hands-on Associates leading schemes from start to finish, providing a consistent point of contact and a genuinely personal service to clients. This approach has resulted in a high level of repeat business and long-standing client relationships, giving the business a stable and secure pipeline of work. They are now looking to bring in a Senior Structural Engineer with around 5+ years' post-graduate experience who is ambitious, motivated and keen to continue developing. This is very much a role where you'll be supported, but also trusted to take ownership and grow into a key member of the team. In this position, you'll be involved in the design and delivery of structural projects across a range of materials including steel, reinforced concrete, masonry and timber, covering both new build and refurbishment schemes. You'll play a key role in developing practical, efficient solutions, working closely with both civil and structural colleagues to deliver coordinated designs from concept through to construction. You'll also support junior engineers, contribute to maintaining high technical standards and be involved in client interaction, helping to build and maintain relationships. The business places a strong emphasis on development, offering structured progression, regular reviews and ongoing CPD to help you move your career forward. Culturally, this is a business that values its people. With low staff turnover, long average tenure and a collaborative working environment, it offers a stable platform for someone looking to progress without the usual corporate layers. Decisions are made quickly, teams are empowered and you'll have the opportunity to genuinely influence both projects and your own development. This is a great opportunity to join a Consultancy where you can take real ownership of your work, be part of a close-knit team and continue building your career within a supportive and forward-thinking environment. For more information about this role, or to discuss similar opportunities, please contact Sam at Calibre Search, or click apply now. Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business.
Due to continued growth and an expanding project portfolio, Turnbull UK is seeking a skilled Mechanical & Electrical Estimator to join our dynamic Estimating team. This is a fantastic opportunity to contribute to high-impact infrastructure projects and work alongside experienced professionals in a collaborative environment. What you'll do As a Mechanical & Electrical Estimator, you will be responsible for preparing accurate and competitive mechanical and electrical engineering estimates across a variety of construction projects. You'll play a key role in supporting both in-house delivery teams and external partners, ensuring robust cost assurance and governance throughout the pre-construction phase. You'll also: develop detailed mechanical and electrical estimates from tender documentation, drawings and specifications collaborate with designers, project managers, clients and suppliers to gather and validate project information provide cost, design and construction methodology advice to all stakeholders to allow informed project decisions lead negotiations with subcontractors and suppliers to secure competitive pricing provide technical input to support efficient design and value engineering assist the Commercial team with variations, applications and final account processes maintain strong relationships with internal teams and external stakeholders throughout the estimating lifecycle support junior members of the team with less experience to increase expert knowledge within the team What you'll need You'll be a proactive and detail-oriented professional with a strong background in mechanical and electrical engineering and estimating. Other requirements include: a mechanical or electrical qualification, installation and project delivery experience experience in HV and LV electrical systems engineering and pricing self-starter with ability to manage their own work to achieve all project submission deadlines excellent analytical and problem-solving skills a strong technical understanding of mechanical and electrical systems and construction processes proficiency in Microsoft Office Suite, specifically Excel and experience of other estimating software a full UK driving licence and access to a vehicle a background in Water and Wastewater projects experience in related sectors such as food manufacturing, process engineering, or oil and gas. What you'll receive At Turnbull we take pride in how we support professional development, enable career progression and provide a wide range of exciting opportunities for everyone. We firmly believe that investing in our people is the key to our success, which is why we offer a range of financial and non-financial benefits to support your health and wellbeing. 25 days' holiday rising to 28 with length of service (Pro Rata) Up to 20% combined pension contribution. The opportunity to buy up to ten days' holiday and sell up to five every year. Performance related bonus of around 5%. A healthcare package that supports you with your healthcare costs. A 1,000 referral fee if you recommend someone to work for us. Life assurance of up to eight times your salary. Sustainable benefits including electric vehicle and cycle2work schemes. A range of family friendly policies including enhanced maternity and paternity leave. One paid volunteering day each year. Cashback and discounts from over 3,000 retailers. Who we are We are leaders in lifecycle construction and operations for the utilities and infrastructure sectors. From design and build to facility management and maintenance, we provide a single, sustainable, end-to-end solution for engineering projects, saving money, reducing waste and adding long-term value to local communities and the wider economy. Turnbull is an award-winning progressive business, which has won the RoSPA health and safety awards for our work at Hinkley Point C for the last five years. The services we provide to our clients include but are not limited to: Project management. Design and build services. Consent management and delivery. Contract management. Delivery of civil, mechanical and electrical engineering services. We have expertise in: Low voltage (LV) and high voltage (HV) electrical power distribution systems. Sewage systems and pumping stations. Biological waste treatment plants. Telecommunication networks (copper and fibre). Drinking water distribution networks and booster stations. Surface and groundwater drainage systems inclusive of borehole delivery and management. Roadway and pedestrian walkway lighting networks. Managing environmental discharge permit and scientific services. Earthworks and ground remediation services. We continue to promote diversity and inclusion. With that in mind, we welcome all applicants. We are also delighted to have signed the Armed Forces Covenant and are a Disability Confident Employer. Sound interesting? Apply to start your application.
Apr 25, 2026
Full time
Due to continued growth and an expanding project portfolio, Turnbull UK is seeking a skilled Mechanical & Electrical Estimator to join our dynamic Estimating team. This is a fantastic opportunity to contribute to high-impact infrastructure projects and work alongside experienced professionals in a collaborative environment. What you'll do As a Mechanical & Electrical Estimator, you will be responsible for preparing accurate and competitive mechanical and electrical engineering estimates across a variety of construction projects. You'll play a key role in supporting both in-house delivery teams and external partners, ensuring robust cost assurance and governance throughout the pre-construction phase. You'll also: develop detailed mechanical and electrical estimates from tender documentation, drawings and specifications collaborate with designers, project managers, clients and suppliers to gather and validate project information provide cost, design and construction methodology advice to all stakeholders to allow informed project decisions lead negotiations with subcontractors and suppliers to secure competitive pricing provide technical input to support efficient design and value engineering assist the Commercial team with variations, applications and final account processes maintain strong relationships with internal teams and external stakeholders throughout the estimating lifecycle support junior members of the team with less experience to increase expert knowledge within the team What you'll need You'll be a proactive and detail-oriented professional with a strong background in mechanical and electrical engineering and estimating. Other requirements include: a mechanical or electrical qualification, installation and project delivery experience experience in HV and LV electrical systems engineering and pricing self-starter with ability to manage their own work to achieve all project submission deadlines excellent analytical and problem-solving skills a strong technical understanding of mechanical and electrical systems and construction processes proficiency in Microsoft Office Suite, specifically Excel and experience of other estimating software a full UK driving licence and access to a vehicle a background in Water and Wastewater projects experience in related sectors such as food manufacturing, process engineering, or oil and gas. What you'll receive At Turnbull we take pride in how we support professional development, enable career progression and provide a wide range of exciting opportunities for everyone. We firmly believe that investing in our people is the key to our success, which is why we offer a range of financial and non-financial benefits to support your health and wellbeing. 25 days' holiday rising to 28 with length of service (Pro Rata) Up to 20% combined pension contribution. The opportunity to buy up to ten days' holiday and sell up to five every year. Performance related bonus of around 5%. A healthcare package that supports you with your healthcare costs. A 1,000 referral fee if you recommend someone to work for us. Life assurance of up to eight times your salary. Sustainable benefits including electric vehicle and cycle2work schemes. A range of family friendly policies including enhanced maternity and paternity leave. One paid volunteering day each year. Cashback and discounts from over 3,000 retailers. Who we are We are leaders in lifecycle construction and operations for the utilities and infrastructure sectors. From design and build to facility management and maintenance, we provide a single, sustainable, end-to-end solution for engineering projects, saving money, reducing waste and adding long-term value to local communities and the wider economy. Turnbull is an award-winning progressive business, which has won the RoSPA health and safety awards for our work at Hinkley Point C for the last five years. The services we provide to our clients include but are not limited to: Project management. Design and build services. Consent management and delivery. Contract management. Delivery of civil, mechanical and electrical engineering services. We have expertise in: Low voltage (LV) and high voltage (HV) electrical power distribution systems. Sewage systems and pumping stations. Biological waste treatment plants. Telecommunication networks (copper and fibre). Drinking water distribution networks and booster stations. Surface and groundwater drainage systems inclusive of borehole delivery and management. Roadway and pedestrian walkway lighting networks. Managing environmental discharge permit and scientific services. Earthworks and ground remediation services. We continue to promote diversity and inclusion. With that in mind, we welcome all applicants. We are also delighted to have signed the Armed Forces Covenant and are a Disability Confident Employer. Sound interesting? Apply to start your application.
Junior Mechanical Engineer (HVAC) Career Progression to Project Manager Our client is a well-established Mechanical (HVAC) Services Contractor operating within the commercial office fit-out sector across Central London. They are seeking to recruit a Junior Mechanical Engineer with the ambition to develop into a Mechanical Project Manager over time. This is an excellent opportunity for someone looking to build a long-term career within the building services industry, with structured training and hands-on project experience provided. Role Overview Assist in the delivery of mechanical (HVAC) projects across commercial fit-out schemes Support Project Managers with coordination, documentation, and site activities Gain exposure to all stages of project delivery, from design through to handover Develop technical, commercial, and management skills Candidate Requirements Some knowledge or experience within HVAC / Building Services (e.g. air conditioning, ventilation, plumbing, or mechanical installations) Strong willingness to learn and develop professionally Good communication and organisational skills Proactive attitude with a genuine interest in progressing into project management What s on Offer Clear progression pathway to Mechanical Project Manager Ongoing training and development Exposure to high-profile commercial projects in Central London Supportive and experienced team environment
Apr 25, 2026
Full time
Junior Mechanical Engineer (HVAC) Career Progression to Project Manager Our client is a well-established Mechanical (HVAC) Services Contractor operating within the commercial office fit-out sector across Central London. They are seeking to recruit a Junior Mechanical Engineer with the ambition to develop into a Mechanical Project Manager over time. This is an excellent opportunity for someone looking to build a long-term career within the building services industry, with structured training and hands-on project experience provided. Role Overview Assist in the delivery of mechanical (HVAC) projects across commercial fit-out schemes Support Project Managers with coordination, documentation, and site activities Gain exposure to all stages of project delivery, from design through to handover Develop technical, commercial, and management skills Candidate Requirements Some knowledge or experience within HVAC / Building Services (e.g. air conditioning, ventilation, plumbing, or mechanical installations) Strong willingness to learn and develop professionally Good communication and organisational skills Proactive attitude with a genuine interest in progressing into project management What s on Offer Clear progression pathway to Mechanical Project Manager Ongoing training and development Exposure to high-profile commercial projects in Central London Supportive and experienced team environment
A growing engineering business is expanding its in-house controls capability following the successful delivery of two major infrastructure projects. Having entered the full-machine build space for the first time, the company has already successfully delivered two major multi-million-pound projects. With strong project momentum and a clear pipeline ahead, the next phase is to bring electrical design fully in-house - and this role will support that journey as part of a developing team. Graduate/Junior Electrical Design Engineer £28-35k + Pension, HealthPlan, Paid Commute Yorkshire Ref: 25368 Graduate/Junior Electrical Design Engineer - The Role: Supporting electrical design for control systems (assisting with full drawing packages for manufacture) Working on large-scale infrastructure and automation projects Assisting with site surveys for refurbishment projects (with support) Collaborating with panel builders, senior engineers, and electrical contractors Opportunity to gain exposure to commissioning activities (optional and supported) This is a development-focused role where you will be mentored by experienced engineers and gradually take on more responsibility as your skills grow. Graduate/Junior Electrical Design Engineer - The Person: Degree or HND/HNC in Electrical Engineering or a related discipline 0 2 years experience (including placements or internships) Some exposure to electrical design software (e.g. AutoCAD Electrical, EPLAN training provided) Interest in control systems / automation Willingness to learn, adaptable, and proactive Strong communication skills and a team-oriented approach PLC knowledge or programming exposure would be beneficial but is not essential. This is a supportive, down-to-earth engineering team with a genuinely positive working culture, offering structured development and the chance to grow within a department being built from the ground up. Hybrid working (typically 3 days in office, flexible depending on workload) 40-hour week with flexitime 25 days holiday + bank holidays 4% pension contribution Healthcare support Travel expenses covered on office days If you re a graduate or early-career engineer looking to build your skills in electrical design and work on large-scale infrastructure projects this is an excellent opportunity to develop your career in a hands-on, supportive environment. Located in West Yorkshire, this role would be commutable from Bradford, Huddersfield, Leeds, Wakefield, Sheffield, Halifax and Doncaster. Looking for a job involved with automation, control systems, process control or systems integration? Register your details on our website where you will find a full list of live positions where a customised automated search process allows immediate access to new vacancies as they are registered. Free, confidential service. For further information call Sarah Clarke
Apr 25, 2026
Full time
A growing engineering business is expanding its in-house controls capability following the successful delivery of two major infrastructure projects. Having entered the full-machine build space for the first time, the company has already successfully delivered two major multi-million-pound projects. With strong project momentum and a clear pipeline ahead, the next phase is to bring electrical design fully in-house - and this role will support that journey as part of a developing team. Graduate/Junior Electrical Design Engineer £28-35k + Pension, HealthPlan, Paid Commute Yorkshire Ref: 25368 Graduate/Junior Electrical Design Engineer - The Role: Supporting electrical design for control systems (assisting with full drawing packages for manufacture) Working on large-scale infrastructure and automation projects Assisting with site surveys for refurbishment projects (with support) Collaborating with panel builders, senior engineers, and electrical contractors Opportunity to gain exposure to commissioning activities (optional and supported) This is a development-focused role where you will be mentored by experienced engineers and gradually take on more responsibility as your skills grow. Graduate/Junior Electrical Design Engineer - The Person: Degree or HND/HNC in Electrical Engineering or a related discipline 0 2 years experience (including placements or internships) Some exposure to electrical design software (e.g. AutoCAD Electrical, EPLAN training provided) Interest in control systems / automation Willingness to learn, adaptable, and proactive Strong communication skills and a team-oriented approach PLC knowledge or programming exposure would be beneficial but is not essential. This is a supportive, down-to-earth engineering team with a genuinely positive working culture, offering structured development and the chance to grow within a department being built from the ground up. Hybrid working (typically 3 days in office, flexible depending on workload) 40-hour week with flexitime 25 days holiday + bank holidays 4% pension contribution Healthcare support Travel expenses covered on office days If you re a graduate or early-career engineer looking to build your skills in electrical design and work on large-scale infrastructure projects this is an excellent opportunity to develop your career in a hands-on, supportive environment. Located in West Yorkshire, this role would be commutable from Bradford, Huddersfield, Leeds, Wakefield, Sheffield, Halifax and Doncaster. Looking for a job involved with automation, control systems, process control or systems integration? Register your details on our website where you will find a full list of live positions where a customised automated search process allows immediate access to new vacancies as they are registered. Free, confidential service. For further information call Sarah Clarke
Locations : Amsterdam Brussels London Who We Are The Boston Consulting Group partners with leaders in business and society to tackle their most important challenges and capture their greatest opportunities. BCG was the pioneer in business strategy when it was founded in 1963. Today, we help clients with total transformation-inspiring complex change, enabling organizations to grow, building competitive advantage, and driving bottom-line impact. To succeed, organizations must blend digital and human capabilities. Our diverse, global teams bring deep industry and functional expertise and a range of perspectives to spark change. BCG delivers solutions through leading-edge management consulting along with technology and design, corporate and digital ventures-and business purpose. We work in a uniquely collaborative model across the firm and throughout all levels of the client organization, generating results that allow our clients to thrive. About BCG Platinion BCG Platinion's presence spans across the globe, with offices in Asia, Europe, and South and North America. We achieve digital excellence for clients with sustained solutions to the most complex and time-sensitive challenge. We guide clients into the future to push the status quo, overcome tech limitations, and enable our clients to go further in their digital journeys than what has ever been possible in the past. At BCG Platinion, we deliver business value through the innovative use of technology at a rapid pace. We roll up our sleeves to transform business, revolutionize approaches, satisfy customers, and change the game through Architecture, Cybersecurity, Digital Transformation, Enterprise Application and Risk functions. We balance vision with a pragmatic path to change transforming strategies into leading-edge tech platforms, at scale. Practice Area BCG Platinion launched in Germany in 2000 to add deep technical expertise to the Boston Consulting Group's existing capabilities. Today, our presence spans across the globe, with offices in Asia, Europe, and South and North America. Our New York-based North American team began in 2014 and in 2017 acquired MAYA Design, a Pittsburgh-based digital design and innovation lab, to grow our capabilities around technology and design. We support our clients' total digital transformation through technology, design, cybersecurity, and risk management & financial engineering capabilities. And together with BCG, BCG Platinion's interdisciplinary team of technical experts enable customized technical solutions and accelerate delivery value through new business platforms, application consolidations, and major system implementations. What You'll Do As a seamlessly integrated part of the BCG network, we provide consulting services focused on the development and implementation of business-critical IT architecture and digital solutions. We create technology platforms and deliver exceptionally customized solutions of the future for our clients, from data strategies to next-generation customer journey solutions and transformational business models. We solve the most daunting challenges that companies face today and envision for tomorrow. Our style is entrepreneurial - nimble and innovative, with multifaceted, cross-functional teams and completely vendor-independent. Our unique selling proposition is technology expertise and delivery. As a Senior IT Consultant, you will work in an international environment, closely with our client's leadership teams to understand their key challenges, define IT strategies, win buy-in for your recommendations and collaborate with BCG case team members to transform client potential into performance with high-impact assignments. You will deploy customized IT strategies, digital platforms and architecture in order to leverage the digital potential of our customers with state of the art tools such as cloud computing, AI, blockchain, microservices and containerization. You will be responsible for specific parts of the project and will evaluate and coach our clients' technology teams, manage quality and risk while maintaining client expectations and escalations. You'll develop ground-breaking projects by enabling our clients to effectively use agile methods and modern approaches in the context of strategic IT implementation. You will work on a variety of technology topics, applying your technical consulting skills to strategic technology questions. You will also be supported by an extensive training curriculum, plus technology-specific training and mentoring to help build upon you technical skills. You will also help guide junior members of the team, help with project proposals, client care, building relationships with peers and identifying new business opportunities. What You'll Bring 6 to 10 years' experience in Tech strategy and consulting or IT project management. Experience with the insurance industry. Strong knowledge on core insurance processes and on (or multiple) insurance packages like GuideWire, Duck Creek or DXC. A strategic thinker, entrepreneurial, able to work creatively and analytically in a problem-solving environment Outstanding analytical and conceptual skills, strong customer focus and mental agility with a results orientation Experience in legacy environments and modern approaches to technology Track record of Agile consulting and advisory with experience in Digital and Agile transformations at scale Experience in IT organisation and process development Experience in the organisation of workshops at peer level and facilitating in client meetings Strong business acumen; can frame complex problems in appropriate business contexts A University degree with above average academic performance in a STEM related field or business management You must also be willing to work outside of Insurance projects when required. For candidates based in London: Fluent in English. For candidates based in the Netherlands: Fluent in English; Dutch is highly desirable. For candidates based in Belgium: Fluent in English, with French or Flemish as an additional requirement. Boston Consulting Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity / expression, national origin, disability, protected veteran status, or any other characteristic protected under national, provincial, or local law, where applicable, and those with criminal histories will be considered in a manner consistent with applicable state and local laws. BCG is an E - Verify Employer. Click here for more information on E-Verify.
Apr 25, 2026
Full time
Locations : Amsterdam Brussels London Who We Are The Boston Consulting Group partners with leaders in business and society to tackle their most important challenges and capture their greatest opportunities. BCG was the pioneer in business strategy when it was founded in 1963. Today, we help clients with total transformation-inspiring complex change, enabling organizations to grow, building competitive advantage, and driving bottom-line impact. To succeed, organizations must blend digital and human capabilities. Our diverse, global teams bring deep industry and functional expertise and a range of perspectives to spark change. BCG delivers solutions through leading-edge management consulting along with technology and design, corporate and digital ventures-and business purpose. We work in a uniquely collaborative model across the firm and throughout all levels of the client organization, generating results that allow our clients to thrive. About BCG Platinion BCG Platinion's presence spans across the globe, with offices in Asia, Europe, and South and North America. We achieve digital excellence for clients with sustained solutions to the most complex and time-sensitive challenge. We guide clients into the future to push the status quo, overcome tech limitations, and enable our clients to go further in their digital journeys than what has ever been possible in the past. At BCG Platinion, we deliver business value through the innovative use of technology at a rapid pace. We roll up our sleeves to transform business, revolutionize approaches, satisfy customers, and change the game through Architecture, Cybersecurity, Digital Transformation, Enterprise Application and Risk functions. We balance vision with a pragmatic path to change transforming strategies into leading-edge tech platforms, at scale. Practice Area BCG Platinion launched in Germany in 2000 to add deep technical expertise to the Boston Consulting Group's existing capabilities. Today, our presence spans across the globe, with offices in Asia, Europe, and South and North America. Our New York-based North American team began in 2014 and in 2017 acquired MAYA Design, a Pittsburgh-based digital design and innovation lab, to grow our capabilities around technology and design. We support our clients' total digital transformation through technology, design, cybersecurity, and risk management & financial engineering capabilities. And together with BCG, BCG Platinion's interdisciplinary team of technical experts enable customized technical solutions and accelerate delivery value through new business platforms, application consolidations, and major system implementations. What You'll Do As a seamlessly integrated part of the BCG network, we provide consulting services focused on the development and implementation of business-critical IT architecture and digital solutions. We create technology platforms and deliver exceptionally customized solutions of the future for our clients, from data strategies to next-generation customer journey solutions and transformational business models. We solve the most daunting challenges that companies face today and envision for tomorrow. Our style is entrepreneurial - nimble and innovative, with multifaceted, cross-functional teams and completely vendor-independent. Our unique selling proposition is technology expertise and delivery. As a Senior IT Consultant, you will work in an international environment, closely with our client's leadership teams to understand their key challenges, define IT strategies, win buy-in for your recommendations and collaborate with BCG case team members to transform client potential into performance with high-impact assignments. You will deploy customized IT strategies, digital platforms and architecture in order to leverage the digital potential of our customers with state of the art tools such as cloud computing, AI, blockchain, microservices and containerization. You will be responsible for specific parts of the project and will evaluate and coach our clients' technology teams, manage quality and risk while maintaining client expectations and escalations. You'll develop ground-breaking projects by enabling our clients to effectively use agile methods and modern approaches in the context of strategic IT implementation. You will work on a variety of technology topics, applying your technical consulting skills to strategic technology questions. You will also be supported by an extensive training curriculum, plus technology-specific training and mentoring to help build upon you technical skills. You will also help guide junior members of the team, help with project proposals, client care, building relationships with peers and identifying new business opportunities. What You'll Bring 6 to 10 years' experience in Tech strategy and consulting or IT project management. Experience with the insurance industry. Strong knowledge on core insurance processes and on (or multiple) insurance packages like GuideWire, Duck Creek or DXC. A strategic thinker, entrepreneurial, able to work creatively and analytically in a problem-solving environment Outstanding analytical and conceptual skills, strong customer focus and mental agility with a results orientation Experience in legacy environments and modern approaches to technology Track record of Agile consulting and advisory with experience in Digital and Agile transformations at scale Experience in IT organisation and process development Experience in the organisation of workshops at peer level and facilitating in client meetings Strong business acumen; can frame complex problems in appropriate business contexts A University degree with above average academic performance in a STEM related field or business management You must also be willing to work outside of Insurance projects when required. For candidates based in London: Fluent in English. For candidates based in the Netherlands: Fluent in English; Dutch is highly desirable. For candidates based in Belgium: Fluent in English, with French or Flemish as an additional requirement. Boston Consulting Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity / expression, national origin, disability, protected veteran status, or any other characteristic protected under national, provincial, or local law, where applicable, and those with criminal histories will be considered in a manner consistent with applicable state and local laws. BCG is an E - Verify Employer. Click here for more information on E-Verify.
Locations : Amsterdam Brussels London Who We Are The Boston Consulting Group partners with leaders in business and society to tackle their most important challenges and capture their greatest opportunities. BCG was the pioneer in business strategy when it was founded in 1963. Today, we help clients with total transformation-inspiring complex change, enabling organizations to grow, building competitive advantage, and driving bottom-line impact. To succeed, organizations must blend digital and human capabilities. Our diverse, global teams bring deep industry and functional expertise and a range of perspectives to spark change. BCG delivers solutions through leading-edge management consulting along with technology and design, corporate and digital ventures-and business purpose. We work in a uniquely collaborative model across the firm and throughout all levels of the client organization, generating results that allow our clients to thrive. About BCG Platinion BCG Platinion's presence spans across the globe, with offices in Asia, Europe, and South and North America. We achieve digital excellence for clients with sustained solutions to the most complex and time-sensitive challenge. We guide clients into the future to push the status quo, overcome tech limitations, and enable our clients to go further in their digital journeys than what has ever been possible in the past. At BCG Platinion, we deliver business value through the innovative use of technology at a rapid pace. We roll up our sleeves to transform business, revolutionize approaches, satisfy customers, and change the game through Architecture, Cybersecurity, Digital Transformation, Enterprise Application and Risk functions. We balance vision with a pragmatic path to change transforming strategies into leading-edge tech platforms, at scale. Practice Area BCG Platinion launched in Germany in 2000 to add deep technical expertise to the Boston Consulting Group's existing capabilities. Today, our presence spans across the globe, with offices in Asia, Europe, and South and North America. Our New York-based North American team began in 2014 and in 2017 acquired MAYA Design, a Pittsburgh-based digital design and innovation lab, to grow our capabilities around technology and design. We support our clients' total digital transformation through technology, design, cybersecurity, and risk management & financial engineering capabilities. And together with BCG, BCG Platinion's interdisciplinary team of technical experts enable customized technical solutions and accelerate delivery value through new business platforms, application consolidations, and major system implementations. What You'll Do As a seamlessly integrated part of the BCG network, we provide consulting services focused on the development and implementation of business-critical IT architecture and digital solutions. We create technology platforms and deliver exceptionally customized solutions of the future for our clients, from data strategies to next-generation customer journey solutions and transformational business models. We solve the most daunting challenges that companies face today and envision for tomorrow. Our style is entrepreneurial - nimble and innovative, with multifaceted, cross-functional teams and completely vendor-independent. Our unique selling proposition is technology expertise and delivery. As a Senior IT Consultant, you will work in an international environment, closely with our client's leadership teams to understand their key challenges, define IT strategies, win buy-in for your recommendations and collaborate with BCG case team members to transform client potential into performance with high-impact assignments. You will deploy customized IT strategies, digital platforms and architecture in order to leverage the digital potential of our customers with state of the art tools such as cloud computing, AI, blockchain, microservices and containerization. You will be responsible for specific parts of the project and will evaluate and coach our clients' technology teams, manage quality and risk while maintaining client expectations and escalations. You'll develop ground-breaking projects by enabling our clients to effectively use agile methods and modern approaches in the context of strategic IT implementation. You will work on a variety of technology topics, applying your technical consulting skills to strategic technology questions. You will also be supported by an extensive training curriculum, plus technology-specific training and mentoring to help build upon you technical skills. You will also help guide junior members of the team, help with project proposals, client care, building relationships with peers and identifying new business opportunities. What You'll Bring 6 to 10 years' experience in Tech strategy and consulting or IT project management. Experience with the insurance industry. Strong knowledge on core insurance processes and on (or multiple) insurance packages like GuideWire, Duck Creek or DXC. A strategic thinker, entrepreneurial, able to work creatively and analytically in a problem-solving environment Outstanding analytical and conceptual skills, strong customer focus and mental agility with a results orientation Experience in legacy environments and modern approaches to technology Track record of Agile consulting and advisory with experience in Digital and Agile transformations at scale Experience in IT organisation and process development Experience in the organisation of workshops at peer level and facilitating in client meetings Strong business acumen; can frame complex problems in appropriate business contexts A University degree with above average academic performance in a STEM related field or business management You must also be willing to work outside of Insurance projects when required. For candidates based in London: Fluent in English. For candidates based in the Netherlands: Fluent in English; Dutch is highly desirable. For candidates based in Belgium: Fluent in English, with French or Flemish as an additional requirement. Boston Consulting Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity / expression, national origin, disability, protected veteran status, or any other characteristic protected under national, provincial, or local law, where applicable, and those with criminal histories will be considered in a manner consistent with applicable state and local laws. BCG is an E - Verify Employer. Click here for more information on E-Verify.
Apr 25, 2026
Full time
Locations : Amsterdam Brussels London Who We Are The Boston Consulting Group partners with leaders in business and society to tackle their most important challenges and capture their greatest opportunities. BCG was the pioneer in business strategy when it was founded in 1963. Today, we help clients with total transformation-inspiring complex change, enabling organizations to grow, building competitive advantage, and driving bottom-line impact. To succeed, organizations must blend digital and human capabilities. Our diverse, global teams bring deep industry and functional expertise and a range of perspectives to spark change. BCG delivers solutions through leading-edge management consulting along with technology and design, corporate and digital ventures-and business purpose. We work in a uniquely collaborative model across the firm and throughout all levels of the client organization, generating results that allow our clients to thrive. About BCG Platinion BCG Platinion's presence spans across the globe, with offices in Asia, Europe, and South and North America. We achieve digital excellence for clients with sustained solutions to the most complex and time-sensitive challenge. We guide clients into the future to push the status quo, overcome tech limitations, and enable our clients to go further in their digital journeys than what has ever been possible in the past. At BCG Platinion, we deliver business value through the innovative use of technology at a rapid pace. We roll up our sleeves to transform business, revolutionize approaches, satisfy customers, and change the game through Architecture, Cybersecurity, Digital Transformation, Enterprise Application and Risk functions. We balance vision with a pragmatic path to change transforming strategies into leading-edge tech platforms, at scale. Practice Area BCG Platinion launched in Germany in 2000 to add deep technical expertise to the Boston Consulting Group's existing capabilities. Today, our presence spans across the globe, with offices in Asia, Europe, and South and North America. Our New York-based North American team began in 2014 and in 2017 acquired MAYA Design, a Pittsburgh-based digital design and innovation lab, to grow our capabilities around technology and design. We support our clients' total digital transformation through technology, design, cybersecurity, and risk management & financial engineering capabilities. And together with BCG, BCG Platinion's interdisciplinary team of technical experts enable customized technical solutions and accelerate delivery value through new business platforms, application consolidations, and major system implementations. What You'll Do As a seamlessly integrated part of the BCG network, we provide consulting services focused on the development and implementation of business-critical IT architecture and digital solutions. We create technology platforms and deliver exceptionally customized solutions of the future for our clients, from data strategies to next-generation customer journey solutions and transformational business models. We solve the most daunting challenges that companies face today and envision for tomorrow. Our style is entrepreneurial - nimble and innovative, with multifaceted, cross-functional teams and completely vendor-independent. Our unique selling proposition is technology expertise and delivery. As a Senior IT Consultant, you will work in an international environment, closely with our client's leadership teams to understand their key challenges, define IT strategies, win buy-in for your recommendations and collaborate with BCG case team members to transform client potential into performance with high-impact assignments. You will deploy customized IT strategies, digital platforms and architecture in order to leverage the digital potential of our customers with state of the art tools such as cloud computing, AI, blockchain, microservices and containerization. You will be responsible for specific parts of the project and will evaluate and coach our clients' technology teams, manage quality and risk while maintaining client expectations and escalations. You'll develop ground-breaking projects by enabling our clients to effectively use agile methods and modern approaches in the context of strategic IT implementation. You will work on a variety of technology topics, applying your technical consulting skills to strategic technology questions. You will also be supported by an extensive training curriculum, plus technology-specific training and mentoring to help build upon you technical skills. You will also help guide junior members of the team, help with project proposals, client care, building relationships with peers and identifying new business opportunities. What You'll Bring 6 to 10 years' experience in Tech strategy and consulting or IT project management. Experience with the insurance industry. Strong knowledge on core insurance processes and on (or multiple) insurance packages like GuideWire, Duck Creek or DXC. A strategic thinker, entrepreneurial, able to work creatively and analytically in a problem-solving environment Outstanding analytical and conceptual skills, strong customer focus and mental agility with a results orientation Experience in legacy environments and modern approaches to technology Track record of Agile consulting and advisory with experience in Digital and Agile transformations at scale Experience in IT organisation and process development Experience in the organisation of workshops at peer level and facilitating in client meetings Strong business acumen; can frame complex problems in appropriate business contexts A University degree with above average academic performance in a STEM related field or business management You must also be willing to work outside of Insurance projects when required. For candidates based in London: Fluent in English. For candidates based in the Netherlands: Fluent in English; Dutch is highly desirable. For candidates based in Belgium: Fluent in English, with French or Flemish as an additional requirement. Boston Consulting Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity / expression, national origin, disability, protected veteran status, or any other characteristic protected under national, provincial, or local law, where applicable, and those with criminal histories will be considered in a manner consistent with applicable state and local laws. BCG is an E - Verify Employer. Click here for more information on E-Verify.
Manufacturing Operations Engineer Employment: Full Time -Permanent Location: Derby, UK - Onsite Our Client a is a global leader in innovative energy and aerospace turbomachinery, specializing in the development of next generation gas turbines is looking for Manufacturing Engineer and the role is based in Derby for a permanent position. This role is placed within Aerospace - Gas turbine industry. Role The manufacturing operations engineer (MOE) will require basic understanding of project & manufacturing engineering, as the manufacturing engineer will support integrated product teams by setting up and maintaining Bills of Materials (BOM s), managing internal & external manufacturing-related activities, maintaining external supplier relationships, and interfacing with Quality Engineering to ensure that product and non-product are in line with company quality procedures and to disposition any non-conforming material. Manufacturing operations engineer will have background in metallurgy, joining operations, coatings, and additive manufacturing techniques are a plus but can be learned on the job. The vision for the role is one of ever-increasing responsibility and growth to eventually become either a technical expert or IPT Lead. Responsibilities Manufacturing engineer will create, update and maintain BoMs and associated MOE tools whilst supporting multiple complex projects at the same time. You will have understanding of fundamentals of turbomachinery / gas turbines and importance of interfacing rotating/static hardware as it relates to engine operation. You will Serve as interface between purchasing, design, manufacturing and quality. Develop & maintain supplier relationships, document lessons learnt for improved design for manufacturing. Ensure our designs meet manufacturing requirements, set and execute project schedules, provide weekly status & determine solutions for non-conformances. Qualifications & Experience Manufacturing engineer will have Bachelor's degree or equivalent experience in Mechanical/Manufacturing Engineering or a relevant technical degree. Turbo machinery / gas turbines experience in Aerospace industry. Applicable work experience in a manufacturing environment - Aerospace CAD and MRP experience is beneficial Ability to make technical presentations internally and to customers/suppliers. Must be able to work with project teams to define and document requirements, address technical concerns and provide project status. Work Environment The work environment will include a combination of office and lab/workshop. Travel will be required from time to time throughout the UK and Europe. Coach and advise the MOEs junior to the candidate. In return for your dedication and hard work, you will enjoy benefits such as 25 days annual leave plus Bank Holidays, Dentist & Optician cashback, 5% Employer Pension Contribution, Private Medical Insurance, Income Protection, Employee Share Purchase Plan, Extra Cancer Cover, Cycle to work scheme. This vacancy is being advertised by Belcan.
Apr 25, 2026
Full time
Manufacturing Operations Engineer Employment: Full Time -Permanent Location: Derby, UK - Onsite Our Client a is a global leader in innovative energy and aerospace turbomachinery, specializing in the development of next generation gas turbines is looking for Manufacturing Engineer and the role is based in Derby for a permanent position. This role is placed within Aerospace - Gas turbine industry. Role The manufacturing operations engineer (MOE) will require basic understanding of project & manufacturing engineering, as the manufacturing engineer will support integrated product teams by setting up and maintaining Bills of Materials (BOM s), managing internal & external manufacturing-related activities, maintaining external supplier relationships, and interfacing with Quality Engineering to ensure that product and non-product are in line with company quality procedures and to disposition any non-conforming material. Manufacturing operations engineer will have background in metallurgy, joining operations, coatings, and additive manufacturing techniques are a plus but can be learned on the job. The vision for the role is one of ever-increasing responsibility and growth to eventually become either a technical expert or IPT Lead. Responsibilities Manufacturing engineer will create, update and maintain BoMs and associated MOE tools whilst supporting multiple complex projects at the same time. You will have understanding of fundamentals of turbomachinery / gas turbines and importance of interfacing rotating/static hardware as it relates to engine operation. You will Serve as interface between purchasing, design, manufacturing and quality. Develop & maintain supplier relationships, document lessons learnt for improved design for manufacturing. Ensure our designs meet manufacturing requirements, set and execute project schedules, provide weekly status & determine solutions for non-conformances. Qualifications & Experience Manufacturing engineer will have Bachelor's degree or equivalent experience in Mechanical/Manufacturing Engineering or a relevant technical degree. Turbo machinery / gas turbines experience in Aerospace industry. Applicable work experience in a manufacturing environment - Aerospace CAD and MRP experience is beneficial Ability to make technical presentations internally and to customers/suppliers. Must be able to work with project teams to define and document requirements, address technical concerns and provide project status. Work Environment The work environment will include a combination of office and lab/workshop. Travel will be required from time to time throughout the UK and Europe. Coach and advise the MOEs junior to the candidate. In return for your dedication and hard work, you will enjoy benefits such as 25 days annual leave plus Bank Holidays, Dentist & Optician cashback, 5% Employer Pension Contribution, Private Medical Insurance, Income Protection, Employee Share Purchase Plan, Extra Cancer Cover, Cycle to work scheme. This vacancy is being advertised by Belcan.
A successful manufacturing business requires a Junior Buyer. An entry-level position within the business, no previous Buyer or procurement experience would be required. We're seeking a positive, pro-active self-starter, with strong relationship building skills, and attention-to-detail. The Junior Buyer will work within a team of supportive and collaborative Buyers, within the context of a fast-paced manufacturing environment. The Junior Buyer will be responsible for developing strong relationships with internal stakeholders, and externally with suppliers and customers. Specific duties of the Junior Buyer include: Purchase Order Management -placing orders inline with MRP/ERP, expediting and rescheduling orders Supplier Liaison - Relationship building, managing of performance, communicating manufacturing plans Stock Management - Monitor stock and inventory levels and record in MRP/ERP Administration - Upkeep of procurement department data; supplier details, part numbers, availability etc. Internal Liaison - Work closely with sales colleagues in regards to quotations and engineering on supplier issues Junior Buyer applicants should meet the following criteria: Great communication and relationship building skills Strong administration and attention to detail Interest/Willingness to develop a career in a commercial field such as procurement or sales Comfortable working on-site in Poole Commercial acumen or an awareness of procurement would be advantageous
Apr 25, 2026
Full time
A successful manufacturing business requires a Junior Buyer. An entry-level position within the business, no previous Buyer or procurement experience would be required. We're seeking a positive, pro-active self-starter, with strong relationship building skills, and attention-to-detail. The Junior Buyer will work within a team of supportive and collaborative Buyers, within the context of a fast-paced manufacturing environment. The Junior Buyer will be responsible for developing strong relationships with internal stakeholders, and externally with suppliers and customers. Specific duties of the Junior Buyer include: Purchase Order Management -placing orders inline with MRP/ERP, expediting and rescheduling orders Supplier Liaison - Relationship building, managing of performance, communicating manufacturing plans Stock Management - Monitor stock and inventory levels and record in MRP/ERP Administration - Upkeep of procurement department data; supplier details, part numbers, availability etc. Internal Liaison - Work closely with sales colleagues in regards to quotations and engineering on supplier issues Junior Buyer applicants should meet the following criteria: Great communication and relationship building skills Strong administration and attention to detail Interest/Willingness to develop a career in a commercial field such as procurement or sales Comfortable working on-site in Poole Commercial acumen or an awareness of procurement would be advantageous
Software Engineer / C# / Backend / APIs / Software / Cardiff / Permanent / Hybrid / Vivo Talent is working with a business that has huge growth plans for this year. We're actively working with them to recruit a backend engineer into their team, with strong hands-on experience with C# to help build and evovle their strategic applications. You'll be working on API-driven microservices and scalable systems that power real customer journeys. This is a genuine hands-on role with plenty of scope to influence technical decisions, shape how they build software and mentor junior engineers. If you enjoy solving complex problems, collaborating across teams and taking ownership of high-impact work, you'll feel right at home. What you'll do Build and evolve C# microservices and API-driven backend services Develop modern React user interfaces and end-to-end features Troubleshoot across the stack and deliver pragmatic, customer-focused solutions Contribute to architectural decisions and technical discussions Support production systems and help resolve defects and performance issues Collaborate closely with engineers, product owners, and stakeholders Mentor junior developers through pairing, reviews, and knowledge sharing What we're looking for Strong hands-on experience with C# Comfortable working across modern and legacy systems A problem-solver who takes ownership and cares about code quality Clear communicator who works well in cross-functional teams Experience in agile environments (Scrum, Kanban) Software Engineer / C# / React / APIs / Software / Cardiff / Permanent / Hybrid Software Engineer / C# / React / APIs / Software / Cardiff / Permanent / Hybrid Software Engineer / C# / React / APIs / Software / Cardiff / Permanent / Hybrid
Apr 25, 2026
Full time
Software Engineer / C# / Backend / APIs / Software / Cardiff / Permanent / Hybrid / Vivo Talent is working with a business that has huge growth plans for this year. We're actively working with them to recruit a backend engineer into their team, with strong hands-on experience with C# to help build and evovle their strategic applications. You'll be working on API-driven microservices and scalable systems that power real customer journeys. This is a genuine hands-on role with plenty of scope to influence technical decisions, shape how they build software and mentor junior engineers. If you enjoy solving complex problems, collaborating across teams and taking ownership of high-impact work, you'll feel right at home. What you'll do Build and evolve C# microservices and API-driven backend services Develop modern React user interfaces and end-to-end features Troubleshoot across the stack and deliver pragmatic, customer-focused solutions Contribute to architectural decisions and technical discussions Support production systems and help resolve defects and performance issues Collaborate closely with engineers, product owners, and stakeholders Mentor junior developers through pairing, reviews, and knowledge sharing What we're looking for Strong hands-on experience with C# Comfortable working across modern and legacy systems A problem-solver who takes ownership and cares about code quality Clear communicator who works well in cross-functional teams Experience in agile environments (Scrum, Kanban) Software Engineer / C# / React / APIs / Software / Cardiff / Permanent / Hybrid Software Engineer / C# / React / APIs / Software / Cardiff / Permanent / Hybrid Software Engineer / C# / React / APIs / Software / Cardiff / Permanent / Hybrid
Planner & Scheduler - Transit - Toronto, ON Canada Employment Type: Permanent FT (CAN) Workplace Type: Office Our client is an employee-owned construction solutions partner that services the buildings, industrial, infrastructure, water and project finance sectors. We deliver lasting value for our clients through meticulous planning and scheduling, while upholding rigorous safety and quality standards. With offices throughout North America, our passionate and knowledgeable teams deliver projects that enable communities to thrive and people to live, work, move and grow in a rapidly changing world. Join our team to deliver a better tomorrow. We are seeking top-tier talent to join our Buildings division and deliver innovative projects in the healthcare, education, hospitality, recreational, entertainment, retail, commercial office, mixed-use, multi-family residential and light industrial sectors. As a member of this collaborative team, you can expect a safe, diverse and inclusive environment, and on-going learning and career development opportunities. About The Role The Planner Scheduler is responsible for establishing project schedules for high complexity projects with oversight from the Planning / Scheduling Manager, maintaining project schedules of any complexity level, preparing 3-week look- ahead, developing sophisticated schedule performance reports and dashboards, driving extension of time claims, carrying out complex delay analyses, and aiding with project budgeting, change management, and cash flows. As a Planner Scheduler, you will: • Prepare the project master schedule for high complexity projects in accordance with contract requirements • Establish a rapport with the client or client scheduling consultants to establish a project baseline schedule. • Negotiate stringent scheduling specifications to suit the complexity of the project • Prepare schedule updates, including cash flow updates, as per Management System guidelines, and implement and lead the schedule update process when working remotely on a project • Perform review and integration of risk registers and labour productivity • Report schedule performance in the form of a regularly published Schedule Performance Report that contains progress dashboards, Earned Value Analysis / Schedule Performance Index, S-curves, Heatmaps, Milestone Trend Analysis, Variance Analysis, and areas of concern, and mentor junior Planners / Schedulers in the development of such reports • Review reports generated by more junior team members • Identify and communicate areas of risk and opportunity as they relate to the project schedule, participate in response planning, and share past experiences and lessons learned with the project team • Highlight the need for corrective action relating to production and lead discussions on such corrective actions, schedule mitigation measures, and resequencing with the project team • Define criticality criteria as per the contract documents and identify and communicate critical path and near-critical path activities • Review schedules prepared by other team members to identify quality issues and risks, define an optimum risk response plan to complete the project on time, and ensure the schedule is robust and appropriate to support potential extension of time claims • Liaise with subtrades and field superintendents for input into the project schedule and look-aheads • Possess a good understanding of and ability to utilize different methodologies of delay analysis in the industry and work with external delay experts to provide support and oversight for extension of time claims • Track and report on schedule float • Develop commissioning schedules for complex projects, where applicable • Prepare and/or oversee Bid Management schedules for major pursuits by collaborating with design consultants and estimators • Lead the planning and documentation process of the interfaces (inputs and outputs) between design, procurement, construction, and permitting, and mentor junior Planners / Schedulers where required • Lead project schedule management planning (execution plan) • Provide key input to execution plans from a time and resourcing perspective • Oversee and prepare project schedule based on narrative, complete with work area layouts, sequence diagrams, and design-procurement matrix • Contribute to the development and review of the cash flow and project budget, as required • Help review and update the cash flow and identify when deviation from the project schedule and cash flow would require mitigation to get the project back on track • Assist the project team in identifying tasks with low productivity that incur higher costs than budgeted Qualifications/ Experience: • Equivalent to completion of a diploma training program at a college or technical school; a degree in Engineering or Construction Management is preferred • 5+ years of Planning / Scheduling experience with commercial building projects • PMP, PMI-SP, PSP, EIT, P.Eng., CCDA, and/or CET (Certified Engineering Technologist) designation is an asset • Experience working on multiple projects from initiation to close out • Planning / Scheduling experience in a variety of delivery methods such as EPC, Design-Build, CM, PPP, etc • Experience in different delay analysis techniques • General Contractor experience is required • Experience using Primavera P6 and Microsoft Office Suite • Experience using Microsoft Project, Tilos, Powerproject, and vPlanner and with 4D scheduling is an asset • Ability to communicate effectively and write reports, narratives, and analyses in a professional and presentable manner Legal Information: We act as an employment agency for permanent work and as an employment business for temporary work. For roles in the UK, applicants must be eligible to live and work in the UK. We value diversity and promote equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all areas of society and can discuss any reasonable adjustments to support your application.
Apr 25, 2026
Full time
Planner & Scheduler - Transit - Toronto, ON Canada Employment Type: Permanent FT (CAN) Workplace Type: Office Our client is an employee-owned construction solutions partner that services the buildings, industrial, infrastructure, water and project finance sectors. We deliver lasting value for our clients through meticulous planning and scheduling, while upholding rigorous safety and quality standards. With offices throughout North America, our passionate and knowledgeable teams deliver projects that enable communities to thrive and people to live, work, move and grow in a rapidly changing world. Join our team to deliver a better tomorrow. We are seeking top-tier talent to join our Buildings division and deliver innovative projects in the healthcare, education, hospitality, recreational, entertainment, retail, commercial office, mixed-use, multi-family residential and light industrial sectors. As a member of this collaborative team, you can expect a safe, diverse and inclusive environment, and on-going learning and career development opportunities. About The Role The Planner Scheduler is responsible for establishing project schedules for high complexity projects with oversight from the Planning / Scheduling Manager, maintaining project schedules of any complexity level, preparing 3-week look- ahead, developing sophisticated schedule performance reports and dashboards, driving extension of time claims, carrying out complex delay analyses, and aiding with project budgeting, change management, and cash flows. As a Planner Scheduler, you will: • Prepare the project master schedule for high complexity projects in accordance with contract requirements • Establish a rapport with the client or client scheduling consultants to establish a project baseline schedule. • Negotiate stringent scheduling specifications to suit the complexity of the project • Prepare schedule updates, including cash flow updates, as per Management System guidelines, and implement and lead the schedule update process when working remotely on a project • Perform review and integration of risk registers and labour productivity • Report schedule performance in the form of a regularly published Schedule Performance Report that contains progress dashboards, Earned Value Analysis / Schedule Performance Index, S-curves, Heatmaps, Milestone Trend Analysis, Variance Analysis, and areas of concern, and mentor junior Planners / Schedulers in the development of such reports • Review reports generated by more junior team members • Identify and communicate areas of risk and opportunity as they relate to the project schedule, participate in response planning, and share past experiences and lessons learned with the project team • Highlight the need for corrective action relating to production and lead discussions on such corrective actions, schedule mitigation measures, and resequencing with the project team • Define criticality criteria as per the contract documents and identify and communicate critical path and near-critical path activities • Review schedules prepared by other team members to identify quality issues and risks, define an optimum risk response plan to complete the project on time, and ensure the schedule is robust and appropriate to support potential extension of time claims • Liaise with subtrades and field superintendents for input into the project schedule and look-aheads • Possess a good understanding of and ability to utilize different methodologies of delay analysis in the industry and work with external delay experts to provide support and oversight for extension of time claims • Track and report on schedule float • Develop commissioning schedules for complex projects, where applicable • Prepare and/or oversee Bid Management schedules for major pursuits by collaborating with design consultants and estimators • Lead the planning and documentation process of the interfaces (inputs and outputs) between design, procurement, construction, and permitting, and mentor junior Planners / Schedulers where required • Lead project schedule management planning (execution plan) • Provide key input to execution plans from a time and resourcing perspective • Oversee and prepare project schedule based on narrative, complete with work area layouts, sequence diagrams, and design-procurement matrix • Contribute to the development and review of the cash flow and project budget, as required • Help review and update the cash flow and identify when deviation from the project schedule and cash flow would require mitigation to get the project back on track • Assist the project team in identifying tasks with low productivity that incur higher costs than budgeted Qualifications/ Experience: • Equivalent to completion of a diploma training program at a college or technical school; a degree in Engineering or Construction Management is preferred • 5+ years of Planning / Scheduling experience with commercial building projects • PMP, PMI-SP, PSP, EIT, P.Eng., CCDA, and/or CET (Certified Engineering Technologist) designation is an asset • Experience working on multiple projects from initiation to close out • Planning / Scheduling experience in a variety of delivery methods such as EPC, Design-Build, CM, PPP, etc • Experience in different delay analysis techniques • General Contractor experience is required • Experience using Primavera P6 and Microsoft Office Suite • Experience using Microsoft Project, Tilos, Powerproject, and vPlanner and with 4D scheduling is an asset • Ability to communicate effectively and write reports, narratives, and analyses in a professional and presentable manner Legal Information: We act as an employment agency for permanent work and as an employment business for temporary work. For roles in the UK, applicants must be eligible to live and work in the UK. We value diversity and promote equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all areas of society and can discuss any reasonable adjustments to support your application.
As a Penetration Tester, with a focus on Infrastructure testing, you will perform formal and comprehensive penetration testing assessments, producing full written reports to appropriate standards and within agreed deadlines. In addition, you will support with client pre-engagement activities, including scoping and proposal drafting, as well as researching infrastructure and application vulnerabilities, following responsible disclosure, and sharing such findings within the team. Responsibilities Perform formal and comprehensive infrastructure and other penetration testing assessments where appropriate and required; Provide well-written, concise, technical and non-technical reports in English; Perform vulnerability assessments and provide findings with remediation actions; Support with various client pre-engagement interactions, including scoping activities and proposal drafting; Manage and deliver penetration testing project activities within strict deadlines; Research infrastructure and other such components within the wider team to identify new vulnerabilities and follow responsible disclosure; Coach and mentor Graduate and Junior penetration testers where appropriate; Support the Marketing team with the development of content (including, but not limited to: Blogs, Social Media Posts, and Articles) to help raise the profile of Bulletproof's Penetration Testing and other services; Support the QA process to ensure high quality client reports are delivered in accordance with applicable Service Level Agreement (SLA); Any other appropriate job duties in line with the associated skill and experience of the post holder. Skills & Experience Required Proven industry experience in infrastructure and a variety of other penetration testing assessment types; Deep knowledge of assessing both Windows and Linux environments, including strong knowledge of Active Directory and wireless technologies; Deep knowledge of various Operating Systems and network principles; Knowledge of assessing cloud and hybrid environments (AWS and Azure); Strong understanding of OWASP, PTES and MITRE ATT&CK framework; Knowledge of how modern solutions are designed and deployed across different platforms; Ability to program or script in your preferred language; Relevant security qualifications (such as OSCP, CREST CRT, OSEP, CCT INF); Good knowledge of virtualisation. Nice to have Ability to create and implement tactics techniques and procedures (development of scripts, tools, and methods) that can be used in red team engagements (including C2 framework management); Knowledge in preparing and launching social engineering campaigns; Involvement in previous research projects, tool development and training delivery. Personal Attributes Excellent spoken and written communication skills with strong attention-to-detail and accuracy; A passion for security and networks; Analytical and problem-solving skills with a can-do attitude and the ability to think laterally; Self-motivation with a commitment to continued development; Ability to work independently and as part of a team; Influencing and negotiation skills with the ability to build relationships at all levels; Willingness to learn. Benefits Birthday holiday Discounted Private Medical Insurance Gym Membership VITO days - X2 paid volunteer days Enhanced Family Related Leave Pay Standard Life Salary Sacrifice Pension Social Events WorkNest is an equal opportunity employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees.
Apr 25, 2026
Full time
As a Penetration Tester, with a focus on Infrastructure testing, you will perform formal and comprehensive penetration testing assessments, producing full written reports to appropriate standards and within agreed deadlines. In addition, you will support with client pre-engagement activities, including scoping and proposal drafting, as well as researching infrastructure and application vulnerabilities, following responsible disclosure, and sharing such findings within the team. Responsibilities Perform formal and comprehensive infrastructure and other penetration testing assessments where appropriate and required; Provide well-written, concise, technical and non-technical reports in English; Perform vulnerability assessments and provide findings with remediation actions; Support with various client pre-engagement interactions, including scoping activities and proposal drafting; Manage and deliver penetration testing project activities within strict deadlines; Research infrastructure and other such components within the wider team to identify new vulnerabilities and follow responsible disclosure; Coach and mentor Graduate and Junior penetration testers where appropriate; Support the Marketing team with the development of content (including, but not limited to: Blogs, Social Media Posts, and Articles) to help raise the profile of Bulletproof's Penetration Testing and other services; Support the QA process to ensure high quality client reports are delivered in accordance with applicable Service Level Agreement (SLA); Any other appropriate job duties in line with the associated skill and experience of the post holder. Skills & Experience Required Proven industry experience in infrastructure and a variety of other penetration testing assessment types; Deep knowledge of assessing both Windows and Linux environments, including strong knowledge of Active Directory and wireless technologies; Deep knowledge of various Operating Systems and network principles; Knowledge of assessing cloud and hybrid environments (AWS and Azure); Strong understanding of OWASP, PTES and MITRE ATT&CK framework; Knowledge of how modern solutions are designed and deployed across different platforms; Ability to program or script in your preferred language; Relevant security qualifications (such as OSCP, CREST CRT, OSEP, CCT INF); Good knowledge of virtualisation. Nice to have Ability to create and implement tactics techniques and procedures (development of scripts, tools, and methods) that can be used in red team engagements (including C2 framework management); Knowledge in preparing and launching social engineering campaigns; Involvement in previous research projects, tool development and training delivery. Personal Attributes Excellent spoken and written communication skills with strong attention-to-detail and accuracy; A passion for security and networks; Analytical and problem-solving skills with a can-do attitude and the ability to think laterally; Self-motivation with a commitment to continued development; Ability to work independently and as part of a team; Influencing and negotiation skills with the ability to build relationships at all levels; Willingness to learn. Benefits Birthday holiday Discounted Private Medical Insurance Gym Membership VITO days - X2 paid volunteer days Enhanced Family Related Leave Pay Standard Life Salary Sacrifice Pension Social Events WorkNest is an equal opportunity employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees.
Location: Southampton Pay Rate: Approx. £15.00 - £17.00 per hour , depending on experience Job Type: Long-term temporary, ongoing (with potential to become permanent ) Hours: Full-Time Overview We are recruiting on behalf of a well-established engineering and manufacturing organisation seeking an Electromechanical Assembly Technician to support an increased workload. This is a long-term temporary, ongoing requirement with a strong possibility of a permanent role for the right candidate. The position sits within a medium-volume, low-mix manufacturing environment and involves hands-on assembly, testing, troubleshooting, and repair of complex electromechanical assemblies. You will also work closely with production engineering to support continuous improvement initiatives and manufacturing efficiency. Key Responsibilities Assembly, disassembly, testing, troubleshooting, and repair of electromechanical assemblies Performing highly technical electronic assembly, test, and repair tasks Troubleshooting electronic assemblies under engineering supervision using bench equipment (e.g. multimeters, oscilloscopes) Hand soldering of discrete surface-mount components Working from blueprints, schematics, drawings, manuals, samples, and general instructions Manufacturing products that meet customer and internal quality standards Minimising waste and scrap in line with continuous improvement objectives Identifying faults in electronic and control equipment and supporting corrective actions Disassembling equipment and replacing defective or failed components Maintaining high standards of safety, cleanliness, and organisation in the workplace Providing technical guidance to junior technicians where required and checking quality of work Skills & Abilities Clear verbal and written communication skills Ability to read and understand electrical schematics, blueprints, and specifications Confident troubleshooting electronic assemblies and circuit boards Strong problem-solving ability with excellent attention to detail Well organised, reliable, and able to complete tasks on time Able to work both independently and as part of a team Strong awareness of quality and safety regulations Must be legally authorised to work in the United Kingdom Education & Experience A-Levels or equivalent Minimum of three years' experience in a manufacturing environment involving assembly and troubleshooting of electronic or electromechanical systems Experience working in a medium-volume, low-mix production environment is highly desirable Physical Requirements Ability to stand for extended periods and undertake bench-based assembly work Ability to lift up to 25 lbs (approx. 11 kg) Good manual dexterity for installing and modifying equipment Ability to distinguish wire and cable colours and recognise audible tones Additional Information This job description outlines the main responsibilities of the role but is not exhaustive. Duties may vary depending on business requirements. Application Process Shortlisted candidates may be asked to complete a practical skills assessment as part of the interview process. Apply now for immediate consideration.
Apr 25, 2026
Seasonal
Location: Southampton Pay Rate: Approx. £15.00 - £17.00 per hour , depending on experience Job Type: Long-term temporary, ongoing (with potential to become permanent ) Hours: Full-Time Overview We are recruiting on behalf of a well-established engineering and manufacturing organisation seeking an Electromechanical Assembly Technician to support an increased workload. This is a long-term temporary, ongoing requirement with a strong possibility of a permanent role for the right candidate. The position sits within a medium-volume, low-mix manufacturing environment and involves hands-on assembly, testing, troubleshooting, and repair of complex electromechanical assemblies. You will also work closely with production engineering to support continuous improvement initiatives and manufacturing efficiency. Key Responsibilities Assembly, disassembly, testing, troubleshooting, and repair of electromechanical assemblies Performing highly technical electronic assembly, test, and repair tasks Troubleshooting electronic assemblies under engineering supervision using bench equipment (e.g. multimeters, oscilloscopes) Hand soldering of discrete surface-mount components Working from blueprints, schematics, drawings, manuals, samples, and general instructions Manufacturing products that meet customer and internal quality standards Minimising waste and scrap in line with continuous improvement objectives Identifying faults in electronic and control equipment and supporting corrective actions Disassembling equipment and replacing defective or failed components Maintaining high standards of safety, cleanliness, and organisation in the workplace Providing technical guidance to junior technicians where required and checking quality of work Skills & Abilities Clear verbal and written communication skills Ability to read and understand electrical schematics, blueprints, and specifications Confident troubleshooting electronic assemblies and circuit boards Strong problem-solving ability with excellent attention to detail Well organised, reliable, and able to complete tasks on time Able to work both independently and as part of a team Strong awareness of quality and safety regulations Must be legally authorised to work in the United Kingdom Education & Experience A-Levels or equivalent Minimum of three years' experience in a manufacturing environment involving assembly and troubleshooting of electronic or electromechanical systems Experience working in a medium-volume, low-mix production environment is highly desirable Physical Requirements Ability to stand for extended periods and undertake bench-based assembly work Ability to lift up to 25 lbs (approx. 11 kg) Good manual dexterity for installing and modifying equipment Ability to distinguish wire and cable colours and recognise audible tones Additional Information This job description outlines the main responsibilities of the role but is not exhaustive. Duties may vary depending on business requirements. Application Process Shortlisted candidates may be asked to complete a practical skills assessment as part of the interview process. Apply now for immediate consideration.
Inside IR35 GCP Software Engineer required to deliver scalable cloud solutions and contribute to key engineering decisions across ARIX 1 and 2 domains within JLP. Excellent rates (Inside IR35), 100% remote & long-term engagement Key Responsibilities Deliver medium-high complexity tasks with minimal supervision Design, build, and maintain applications on Google Cloud Platform Contribute to and lead technical design decisions (ARIX 1 & 2) Guide and support junior engineers Ensure solutions align with JLP Engineering Principles, Engineering Guide, Quality Strategy, and Coding Principles Skills & Experience Experience with GCP (eg, GKE, Cloud Run, BigQuery, Pub/Sub) Strong programming skills (eg, Java, Python, Go) Knowledge of cloud-native architecture and DevOps practices Solid understanding of software engineering best practices Open to candidates across the UK who can be eligible for BPSS clearance.
Apr 25, 2026
Contractor
Inside IR35 GCP Software Engineer required to deliver scalable cloud solutions and contribute to key engineering decisions across ARIX 1 and 2 domains within JLP. Excellent rates (Inside IR35), 100% remote & long-term engagement Key Responsibilities Deliver medium-high complexity tasks with minimal supervision Design, build, and maintain applications on Google Cloud Platform Contribute to and lead technical design decisions (ARIX 1 & 2) Guide and support junior engineers Ensure solutions align with JLP Engineering Principles, Engineering Guide, Quality Strategy, and Coding Principles Skills & Experience Experience with GCP (eg, GKE, Cloud Run, BigQuery, Pub/Sub) Strong programming skills (eg, Java, Python, Go) Knowledge of cloud-native architecture and DevOps practices Solid understanding of software engineering best practices Open to candidates across the UK who can be eligible for BPSS clearance.
Ernest Gordon Recruitment Limited
Bristol, Somerset
Junior Sales Engineer (Industrial Automation) £35,000 - £40,000 + £55k OTE + Car Allowance + Enhanced Holidays + Robotics Training + Career Progression + Company Benefits Bristol Are you a Junior Sales Engineer looking to join an innovative technology business where you can combine commercial impact with hands-on engineering involvement in a metrology-driven manufacturing environment? On offer is the opportunity to join a forward-thinking business in a customer-facing Sales Engineer role, acting as the technical and commercial link between the company and its clients. This company is a growing technology organisation operating within industrial automation, metrology, and advanced manufacturing, supporting customers across sectors such as Automotive, Aerospace, and Energy. They deliver technically complex solutions designed to improve positional accuracy, process control, and production efficiency in demanding industrial Robotics environments. This role would suit a motivated Sales Engineer who will work closely with engineering teams providing metrology-based solutions, travelling across the UK, building long-term customer relationships, and contributing directly to business growth. The Role: Act as the technical and commercial liaison between the company and customers Present and demonstrate automation and metrology-based solutions to prospective and existing clients Travel across the UK to visit customers and support new business development Work closely with internal engineering teams to understand customer requirements and develop tailored technical and metrology-driven solutions Support sales negotiations and manage opportunities through the full sales process Help identify new business opportunities and contribute to sales strategy The Person: Experience in Sales Engineering or technical sales Background in metrology, industrial automation, robotics, or advanced manufacturing preferred Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH23837e We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Apr 25, 2026
Full time
Junior Sales Engineer (Industrial Automation) £35,000 - £40,000 + £55k OTE + Car Allowance + Enhanced Holidays + Robotics Training + Career Progression + Company Benefits Bristol Are you a Junior Sales Engineer looking to join an innovative technology business where you can combine commercial impact with hands-on engineering involvement in a metrology-driven manufacturing environment? On offer is the opportunity to join a forward-thinking business in a customer-facing Sales Engineer role, acting as the technical and commercial link between the company and its clients. This company is a growing technology organisation operating within industrial automation, metrology, and advanced manufacturing, supporting customers across sectors such as Automotive, Aerospace, and Energy. They deliver technically complex solutions designed to improve positional accuracy, process control, and production efficiency in demanding industrial Robotics environments. This role would suit a motivated Sales Engineer who will work closely with engineering teams providing metrology-based solutions, travelling across the UK, building long-term customer relationships, and contributing directly to business growth. The Role: Act as the technical and commercial liaison between the company and customers Present and demonstrate automation and metrology-based solutions to prospective and existing clients Travel across the UK to visit customers and support new business development Work closely with internal engineering teams to understand customer requirements and develop tailored technical and metrology-driven solutions Support sales negotiations and manage opportunities through the full sales process Help identify new business opportunities and contribute to sales strategy The Person: Experience in Sales Engineering or technical sales Background in metrology, industrial automation, robotics, or advanced manufacturing preferred Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH23837e We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Location: Basildon (fully onsite) Duration: 10 month initial contract (Inside IR35) Role details: Our client, a leader in the Defence & Security sector, is currently seeking a Manufacturing Engineer to join their team on a contract basis in Basildon. This is a fully onsite role as part of the Integrated Sensing and Protection line of business, renowned for delivering defence electronics, mission-critical systems for situational awareness, electronic warfare, communications and surveillance. Key Responsibilities: Developing manufacturing processes by studying product requirements, researching, designing, modifying, and testing manufacturing methods and equipment. Preparing and organising Manufacturing Maturity Reviews, maintaining governance through the Lifecycle Management process, and creating or reviewing Manufacturing Plans. Providing manufacturing decision-making information and resolution proposals. Improving manufacturing efficiency by analysing capacity, planning workflows, determining space requirements, and designing equipment layouts. Reviewing manufacturing documentation, including input to process-specific risk assessments, COSHH data, technical reports, and specifications. Assuring product and process quality by designing methods, validating/verifying process capabilities, establishing standards, and confirming manufacturing processes. Contributing to failure investigations and problem-solving techniques (e.g. 8D). Mentoring, coaching, and developing junior team members to build overall capability. Job Requirements: Degree in a relevant engineering discipline or equivalent experience in a similar role. In-depth understanding of manufacturing processes and principles. People management and leadership skills, including effective performance and change management. Ability to influence and negotiate using data and analysis to support reasoning. A thorough understanding of the operational framework and business processes. Experience in planning and scheduling workload for self and others. Demonstrated knowledge and experience of multiple phases of the Product Life Cycle and associated processes. Ability to communicate complex technical concepts in a non-technical way. Desirable Skills: Experience developing manufacturing capability with an understanding of Industry 4.0 / Smart factory principles. If you are an experienced Manufacturing Engineer looking for a new opportunity to further develop your career within the Defence & Security sector, we would love to hear from you. Apply now to join our client's dynamic and talented team in Basildon.
Apr 25, 2026
Contractor
Location: Basildon (fully onsite) Duration: 10 month initial contract (Inside IR35) Role details: Our client, a leader in the Defence & Security sector, is currently seeking a Manufacturing Engineer to join their team on a contract basis in Basildon. This is a fully onsite role as part of the Integrated Sensing and Protection line of business, renowned for delivering defence electronics, mission-critical systems for situational awareness, electronic warfare, communications and surveillance. Key Responsibilities: Developing manufacturing processes by studying product requirements, researching, designing, modifying, and testing manufacturing methods and equipment. Preparing and organising Manufacturing Maturity Reviews, maintaining governance through the Lifecycle Management process, and creating or reviewing Manufacturing Plans. Providing manufacturing decision-making information and resolution proposals. Improving manufacturing efficiency by analysing capacity, planning workflows, determining space requirements, and designing equipment layouts. Reviewing manufacturing documentation, including input to process-specific risk assessments, COSHH data, technical reports, and specifications. Assuring product and process quality by designing methods, validating/verifying process capabilities, establishing standards, and confirming manufacturing processes. Contributing to failure investigations and problem-solving techniques (e.g. 8D). Mentoring, coaching, and developing junior team members to build overall capability. Job Requirements: Degree in a relevant engineering discipline or equivalent experience in a similar role. In-depth understanding of manufacturing processes and principles. People management and leadership skills, including effective performance and change management. Ability to influence and negotiate using data and analysis to support reasoning. A thorough understanding of the operational framework and business processes. Experience in planning and scheduling workload for self and others. Demonstrated knowledge and experience of multiple phases of the Product Life Cycle and associated processes. Ability to communicate complex technical concepts in a non-technical way. Desirable Skills: Experience developing manufacturing capability with an understanding of Industry 4.0 / Smart factory principles. If you are an experienced Manufacturing Engineer looking for a new opportunity to further develop your career within the Defence & Security sector, we would love to hear from you. Apply now to join our client's dynamic and talented team in Basildon.
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
Apr 25, 2026
Full time
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
