Manufacturing Assembler - High Dexterity Assembly Job Summary To perform highly precise manual assembly and finishing operations on small, delicate, or high-tolerance components where exceptional hand dexterity, steady control, and attention to microscopic detail are critical to product quality and safety. Key Responsibilities Assemble micro-scale or high-precision components using hand tools, tweezers, microscopes, or magnification systems Perform fine alignment, fitting, and adjustment of components within extremely tight tolerances Handle fragile materials (e.g. micro-electronics, thin wires, miniature fasteners, precision springs) without damage Conduct detailed visual inspections to identify defects not detectable by automated systems Execute repetitive, detail-intensive tasks while maintaining consistent quality over extended periods Follow exacting work instructions, schematics, and standard operating procedures Maintain cleanroom or controlled-environment discipline where required Accurately document assembly steps, quality checks, and deviations Collaborate with quality and engineering teams to resolve precision-related issues Required Skills & Abilities (Critical) Exceptional fine motor skills and hand-eye coordination Ability to manipulate extremely small parts with consistent accuracy Steady hands with minimal tremor under magnification High tactile sensitivity and spatial awareness Strong visual acuity (with or without corrective lenses) Ability to maintain focus on intricate tasks for long durations Superior attention to detail and error detection Patience and discipline in repetitive precision work Physical & Cognitive Requirements Prolonged seated or static working positions Frequent use of fingers, hands, and wrists for delicate movements Ability to work under magnification or microscopes Strong concentration and mental stamina Ability to work at a controlled, methodical pace without rushing Experience & Background (Preferred) Previous work in precision manufacturing, micro-assembly, electronics, medical devices, jewellery, watchmaking, or similar fields Manufacturing / Production working environment (Cleanroom & Temperature and Humidity Controlled) Familiarity with precision hand tools and micro-assembly equipment Quality & Performance Standards Zero-defect mindset with strict adherence to tolerance limits Consistent output quality across high-volume or high-complexity builds Compliance with safety, cleanliness, and quality regulations Ideal Candidate Traits Naturally meticulous and detail-oriented Calm, steady, and methodical under pressure Takes pride in craftsmanship and precision Highly reliable and process-driven This role requires you to complete a Trades Test before we can submit your CV to the client. Only apply if you are willing to attend our Whiteley site to undertake this assessment.
Apr 16, 2026
Contractor
Manufacturing Assembler - High Dexterity Assembly Job Summary To perform highly precise manual assembly and finishing operations on small, delicate, or high-tolerance components where exceptional hand dexterity, steady control, and attention to microscopic detail are critical to product quality and safety. Key Responsibilities Assemble micro-scale or high-precision components using hand tools, tweezers, microscopes, or magnification systems Perform fine alignment, fitting, and adjustment of components within extremely tight tolerances Handle fragile materials (e.g. micro-electronics, thin wires, miniature fasteners, precision springs) without damage Conduct detailed visual inspections to identify defects not detectable by automated systems Execute repetitive, detail-intensive tasks while maintaining consistent quality over extended periods Follow exacting work instructions, schematics, and standard operating procedures Maintain cleanroom or controlled-environment discipline where required Accurately document assembly steps, quality checks, and deviations Collaborate with quality and engineering teams to resolve precision-related issues Required Skills & Abilities (Critical) Exceptional fine motor skills and hand-eye coordination Ability to manipulate extremely small parts with consistent accuracy Steady hands with minimal tremor under magnification High tactile sensitivity and spatial awareness Strong visual acuity (with or without corrective lenses) Ability to maintain focus on intricate tasks for long durations Superior attention to detail and error detection Patience and discipline in repetitive precision work Physical & Cognitive Requirements Prolonged seated or static working positions Frequent use of fingers, hands, and wrists for delicate movements Ability to work under magnification or microscopes Strong concentration and mental stamina Ability to work at a controlled, methodical pace without rushing Experience & Background (Preferred) Previous work in precision manufacturing, micro-assembly, electronics, medical devices, jewellery, watchmaking, or similar fields Manufacturing / Production working environment (Cleanroom & Temperature and Humidity Controlled) Familiarity with precision hand tools and micro-assembly equipment Quality & Performance Standards Zero-defect mindset with strict adherence to tolerance limits Consistent output quality across high-volume or high-complexity builds Compliance with safety, cleanliness, and quality regulations Ideal Candidate Traits Naturally meticulous and detail-oriented Calm, steady, and methodical under pressure Takes pride in craftsmanship and precision Highly reliable and process-driven This role requires you to complete a Trades Test before we can submit your CV to the client. Only apply if you are willing to attend our Whiteley site to undertake this assessment.
Manufacturing Assembler Job Summary The Manufacturing Assembler will be responsible for the assembly, inspection, and process control of electronic or semiconductor devices to ensure products meet quality, reliability, and performance requirements in a manufacturing environment. Key Responsibilities Assemble parts and subassemblies using hand tools, fixtures, and equipment Follow work instructions, drawings, and standard operating procedures Meet production targets while maintaining quality standards Inspect assembled products for defects and ensure conformance to specifications Report quality issues, equipment problems, or material shortages Maintain a clean and organised work area (5S) Follow all safety policies and procedures Complete required production and quality documentation Support continuous improvement initiatives Qualifications & Experience Prior manufacturing or assembly experience essential Ability to read basic drawings and work instructions Experience using hand tools and precision assembly equipment Skills & Competencies Attention to detail and quality focus Manual dexterity and hand-eye coordination, with ability to manipulate extremely small parts with consistent accuracy Ability to work in a team environment Time management and reliability Work Environment & Physical Requirements Previous experience working in Manufacturing / Production working environment (Cleanroom & Temperature and Humidity Controlled) Ability to stand or sit for extended periods Repetitive motion and fine motor tasks may be required Manufacturing Assembly Operator - Roles & Responsibilities Assembly & Production Assemble components, subassemblies, and finished products according to work instructions and drawings Use hand tools, power tools, fixtures, and assembly equipment safely and correctly Meet production targets while maintaining quality standards Quality Control Inspect parts and assemblies to ensure they meet specifications Identify, report, and help correct defects or non-conformances Follow quality procedures and documentation requirements Safety & Compliance Follow all safety rules, procedures, and PPE requirements Handle ESD-Sensitive Devices following company ESD control procedures Maintain a safe, clean, and organised workstation (5S) Report safety hazards, incidents, or near misses Documentation & Reporting Complete production records and maintain process checklists accurately Track quantities produced, scrap, and rework Communicate issues related to materials, equipment, or processes Ability to consult / Liaise with Engineering Teams on task requirements This role requires you to complete a Trades Test before we can submit your CV to the client. Only apply if you are willing to attend our Whiteley site to undertake this assessment.
Apr 16, 2026
Contractor
Manufacturing Assembler Job Summary The Manufacturing Assembler will be responsible for the assembly, inspection, and process control of electronic or semiconductor devices to ensure products meet quality, reliability, and performance requirements in a manufacturing environment. Key Responsibilities Assemble parts and subassemblies using hand tools, fixtures, and equipment Follow work instructions, drawings, and standard operating procedures Meet production targets while maintaining quality standards Inspect assembled products for defects and ensure conformance to specifications Report quality issues, equipment problems, or material shortages Maintain a clean and organised work area (5S) Follow all safety policies and procedures Complete required production and quality documentation Support continuous improvement initiatives Qualifications & Experience Prior manufacturing or assembly experience essential Ability to read basic drawings and work instructions Experience using hand tools and precision assembly equipment Skills & Competencies Attention to detail and quality focus Manual dexterity and hand-eye coordination, with ability to manipulate extremely small parts with consistent accuracy Ability to work in a team environment Time management and reliability Work Environment & Physical Requirements Previous experience working in Manufacturing / Production working environment (Cleanroom & Temperature and Humidity Controlled) Ability to stand or sit for extended periods Repetitive motion and fine motor tasks may be required Manufacturing Assembly Operator - Roles & Responsibilities Assembly & Production Assemble components, subassemblies, and finished products according to work instructions and drawings Use hand tools, power tools, fixtures, and assembly equipment safely and correctly Meet production targets while maintaining quality standards Quality Control Inspect parts and assemblies to ensure they meet specifications Identify, report, and help correct defects or non-conformances Follow quality procedures and documentation requirements Safety & Compliance Follow all safety rules, procedures, and PPE requirements Handle ESD-Sensitive Devices following company ESD control procedures Maintain a safe, clean, and organised workstation (5S) Report safety hazards, incidents, or near misses Documentation & Reporting Complete production records and maintain process checklists accurately Track quantities produced, scrap, and rework Communicate issues related to materials, equipment, or processes Ability to consult / Liaise with Engineering Teams on task requirements This role requires you to complete a Trades Test before we can submit your CV to the client. Only apply if you are willing to attend our Whiteley site to undertake this assessment.
Assembler Location: Cheadle (Stockport) Type of role: Permanent Salary: £29,125/annum Shift pattern: Monday Friday (DAYS) 37hrs/week About Company Our client brings advanced technology to life. As a global leader in mission-critical technologies for medical and advanced industrial OEMs, they are driven by innovation, precision, and purpose. Join a team where your expertise powers breakthroughs that matter. Job Purpose The ideal candidate for above role will be a confident and highly organized self-starter with some applications knowledge, communication and technical problem-solving skills to ensure execution of our quality standards and customer on time delivery metrics. Key Responsibilities Able to read, understand, and adhere to work instructions, BOMs, and assembly drawings Usage of hand tools properly and safely Mechanical assembly of product within acceptable quality and output levels Soldering of cables, wires and through hole devices within acceptable quality limits Inspect product and properly identify non-conformances Properly operate pass/fail test equipment (ALTF, PD Test, etc.) Cleanliness and workstation clean up through 5S standards Strict compliance with the quality, occupational safety, and environmental regulations. Implementation of the instructions of the quality / environmental management representative and the occupational safety specialist What you bring: Team player with strong computer, written, verbal and skills Previous experience with opto-electronics and PCB commodities, Working experience in Lean Manufacturing and Six Sigma environments Familiar and knowledgeable with QMS standards (ie: ISO 9001) Basic knowledge and practice of ESD and 5S principles Safety and chemical awareness Preferred - IPC solder requirements verified (Consistently meet IPC requirements tested per IPC610 requirements) Why join our client: Work on cutting-edge technologies that make a real-world impact. Be part of a collaborative, forward-thinking team. Competitive salary and benefits package. Opportunities for professional growth and global collaboration. If you think that you are suitable for the role, please do not hesitate to apply. LMIND
Apr 16, 2026
Full time
Assembler Location: Cheadle (Stockport) Type of role: Permanent Salary: £29,125/annum Shift pattern: Monday Friday (DAYS) 37hrs/week About Company Our client brings advanced technology to life. As a global leader in mission-critical technologies for medical and advanced industrial OEMs, they are driven by innovation, precision, and purpose. Join a team where your expertise powers breakthroughs that matter. Job Purpose The ideal candidate for above role will be a confident and highly organized self-starter with some applications knowledge, communication and technical problem-solving skills to ensure execution of our quality standards and customer on time delivery metrics. Key Responsibilities Able to read, understand, and adhere to work instructions, BOMs, and assembly drawings Usage of hand tools properly and safely Mechanical assembly of product within acceptable quality and output levels Soldering of cables, wires and through hole devices within acceptable quality limits Inspect product and properly identify non-conformances Properly operate pass/fail test equipment (ALTF, PD Test, etc.) Cleanliness and workstation clean up through 5S standards Strict compliance with the quality, occupational safety, and environmental regulations. Implementation of the instructions of the quality / environmental management representative and the occupational safety specialist What you bring: Team player with strong computer, written, verbal and skills Previous experience with opto-electronics and PCB commodities, Working experience in Lean Manufacturing and Six Sigma environments Familiar and knowledgeable with QMS standards (ie: ISO 9001) Basic knowledge and practice of ESD and 5S principles Safety and chemical awareness Preferred - IPC solder requirements verified (Consistently meet IPC requirements tested per IPC610 requirements) Why join our client: Work on cutting-edge technologies that make a real-world impact. Be part of a collaborative, forward-thinking team. Competitive salary and benefits package. Opportunities for professional growth and global collaboration. If you think that you are suitable for the role, please do not hesitate to apply. LMIND
Assembler Prototyping Laser Subsystems Location: Cheadle (Stockport) Type of role: Permanent Salary: £31,352/annum Shift pattern: Monday Friday (DAYS) 37hrs/week About Company Our client brings advanced technology to life. As a global leader in mission-critical technologies for medical and advanced industrial OEMs, they are driven by innovation, precision, and purpose. Join a team where your expertise powers breakthroughs that matter. Job Purpose As the inventor of galvanometer-based optical scanning technology, it is our client s mission to drive innovations in photonics by delivering unprecedented technical capabilities through the critical lens of collaboration, quality, and customer service. Key Responsibilities Assembly, testing and system acceptance of laser scan systems, controllers and opto-mechatronic assemblies Troubleshooting and correction of systems and assemblies in service cases Measurement of optical components Processing order documents Creating and maintaining quality records and assembly instructions Building and testing prototypes for research projects and new product developments Incoming goods inspection of electronic components What you bring: Completed vocational training or further training in the field of electronics/mechatronics/electrical engineering or comparable Manual dexterity Familiarity with 2D/3D technical drawings Independent and solution-orientated way of working Precise and meticulous working style Good communication skills Good team player Why join our client: Work on cutting-edge technologies that make a real-world impact. Be part of a collaborative, forward-thinking team. Competitive salary and benefits package. Opportunities for professional growth and global collaboration. If you think that you are suitable for the role, please do not hesitate to apply. LMIND
Apr 16, 2026
Full time
Assembler Prototyping Laser Subsystems Location: Cheadle (Stockport) Type of role: Permanent Salary: £31,352/annum Shift pattern: Monday Friday (DAYS) 37hrs/week About Company Our client brings advanced technology to life. As a global leader in mission-critical technologies for medical and advanced industrial OEMs, they are driven by innovation, precision, and purpose. Join a team where your expertise powers breakthroughs that matter. Job Purpose As the inventor of galvanometer-based optical scanning technology, it is our client s mission to drive innovations in photonics by delivering unprecedented technical capabilities through the critical lens of collaboration, quality, and customer service. Key Responsibilities Assembly, testing and system acceptance of laser scan systems, controllers and opto-mechatronic assemblies Troubleshooting and correction of systems and assemblies in service cases Measurement of optical components Processing order documents Creating and maintaining quality records and assembly instructions Building and testing prototypes for research projects and new product developments Incoming goods inspection of electronic components What you bring: Completed vocational training or further training in the field of electronics/mechatronics/electrical engineering or comparable Manual dexterity Familiarity with 2D/3D technical drawings Independent and solution-orientated way of working Precise and meticulous working style Good communication skills Good team player Why join our client: Work on cutting-edge technologies that make a real-world impact. Be part of a collaborative, forward-thinking team. Competitive salary and benefits package. Opportunities for professional growth and global collaboration. If you think that you are suitable for the role, please do not hesitate to apply. LMIND
Important: Must have sole British Nationality (due to UK eyes-only projects), and have, or be capable of obtaining, UK security clearance (SC) Benefits: Full company benefits, flexible working and some remote working potentials. - We are looking a Hardware Engineer who can operate in a fast-paced environment as part of a multi-disciplined team across all aspects of standard and bespoke secure digital design solutions to join one of our major defence clients. As a Hardware Engineer on the team, you will be involved in all aspects of a challenging and rewarding engineering role covering design, test, production support and customer unit evaluation and commissioning. - Key Responsibilities: Ownership of the design and delivery of hardware throughout the development lifecycle Specification and design of high-speed digital boards for products and test equipment Design, build and test of development and production test equipment Schematic capture and support of PCB layout Co-ordinate design with Mechanical, Software and System engineers Hardware design proving testing Support to software and system testing Production of development and production test processes and procedures. Support to manufacturing, resolving test and production issues, training production staff Resolution of design, obsolescence and production issues on existing products Integration of Data At Rest products into customer platforms In addition, from time to time, you may be asked to undertake other tasks and responsibilities not covered above in order to achieve project or business objectives. Experience needed: Full development life-cycle experience Excellent understanding of electronic design fundamentals, high speed digital design and signal integrity Proven track record of digital circuit development Adept with hardware testing and troubleshooting using oscilloscopes, logic analysers, power supplies and multi-meters. Proficient with industry standard CAD toolsets (e.g. Cadence or Mentor Schematic & Layout Tools) Degree in Electronic Engineering or similar discipline Must be a UK national and have or, be capable of obtaining, UK security clearance Desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience supporting production Design for Test (DFT) and Design for Manufacture (DFM) methodologies and techniques Embedded firmware design (C/C++/assembler/Python). Software design for test and test equipment development Writing test specifications and carrying out HW and system testing - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Details: Join a Global communications company, where the innovations have helped shape how consumers, businesses, governments, and militaries around the world communicate! - even in the hardest-to-reach places! The company are growing rapidly and looking for passionate, innovative professionals to join the team. You'll work in a collaborative and inclusive environment that values diverse perspectives and continuous learning. Technology Innovators Awards Gold Honoree 2021 Glassdoor's 2022 Best Places to Work for U.S. Large Employers List! - For full information, please get in touch
Apr 16, 2026
Full time
Important: Must have sole British Nationality (due to UK eyes-only projects), and have, or be capable of obtaining, UK security clearance (SC) Benefits: Full company benefits, flexible working and some remote working potentials. - We are looking a Hardware Engineer who can operate in a fast-paced environment as part of a multi-disciplined team across all aspects of standard and bespoke secure digital design solutions to join one of our major defence clients. As a Hardware Engineer on the team, you will be involved in all aspects of a challenging and rewarding engineering role covering design, test, production support and customer unit evaluation and commissioning. - Key Responsibilities: Ownership of the design and delivery of hardware throughout the development lifecycle Specification and design of high-speed digital boards for products and test equipment Design, build and test of development and production test equipment Schematic capture and support of PCB layout Co-ordinate design with Mechanical, Software and System engineers Hardware design proving testing Support to software and system testing Production of development and production test processes and procedures. Support to manufacturing, resolving test and production issues, training production staff Resolution of design, obsolescence and production issues on existing products Integration of Data At Rest products into customer platforms In addition, from time to time, you may be asked to undertake other tasks and responsibilities not covered above in order to achieve project or business objectives. Experience needed: Full development life-cycle experience Excellent understanding of electronic design fundamentals, high speed digital design and signal integrity Proven track record of digital circuit development Adept with hardware testing and troubleshooting using oscilloscopes, logic analysers, power supplies and multi-meters. Proficient with industry standard CAD toolsets (e.g. Cadence or Mentor Schematic & Layout Tools) Degree in Electronic Engineering or similar discipline Must be a UK national and have or, be capable of obtaining, UK security clearance Desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience supporting production Design for Test (DFT) and Design for Manufacture (DFM) methodologies and techniques Embedded firmware design (C/C++/assembler/Python). Software design for test and test equipment development Writing test specifications and carrying out HW and system testing - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Details: Join a Global communications company, where the innovations have helped shape how consumers, businesses, governments, and militaries around the world communicate! - even in the hardest-to-reach places! The company are growing rapidly and looking for passionate, innovative professionals to join the team. You'll work in a collaborative and inclusive environment that values diverse perspectives and continuous learning. Technology Innovators Awards Gold Honoree 2021 Glassdoor's 2022 Best Places to Work for U.S. Large Employers List! - For full information, please get in touch
PCB Assembler Reed Engineering are currently supporting a specialist electronics manufacturer in recruiting a skilled PCB Assembler to join their growing production team. Overview This position plays a vital role in ensuring the successful manufacture of high-quality electronic PCB assemblies and sub-assemblies. The role predominantly focuses on through-hole PCB assembly and soldering to IPC-A-610 Class 2 and 3 standards, alongside inspection, testing, rework, and general assembly duties. Contract: Full-time (flexible working hours between 7am and 10pm) Reporting to: Technical Manager Key Responsibilities Electronic Production Assemble Printed Circuit Boards to a consistently high standard Solder conventional components accurately to IPC-A-610 Class 2 and 3 standards Conduct detailed visual inspections to verify compliance with IPC standards Check completed assemblies to ensure accuracy and quality Perform functional testing on assembled PCBs Maintain accurate production and assembly records Rework Repair or replace conventional components on defective PCBs Test all reworked boards to ensure correct functionality SMT Rework (advantageous) Straighten, repair, or replace SMT components as required Test reworked SMT boards for full functionality AOI Operation (advantageous) Operate Automated Optical Inspection equipment to identify areas requiring rework Box Build (where required) Assemble electronic sub-assemblies quickly and accurately Conduct functional tests on sub-assemblies General Duties Work to high quality standards and follow established procedures Maintain a clean, tidy, and well-organised work environment Support the Technical Manager where needed Provide feedback, reports, and suggestions for continuous improvement Follow all quality management systems and contribute to performance improvements Requirements Technical Requirements Excellent hand-eye coordination and manual dexterity Strong soldering skills Ability to follow instructions accurately and maintain focus Confident using a range of hand and power tools Skills Excellent soldering capability Ability to read and interpret circuit board diagrams Strong component identification skills High attention to detail and accuracy Ability to follow written instructions clearly Personal Traits Strong concentration levels Ability to interpret technical drawings Manual dexterity and steady hand-eye coordination High attention to detail Why Apply? This is an excellent opportunity for a dedicated PCB Assembler to join a supportive technical team, contribute to high-quality production output, and further develop their rework and inspection skills.
Apr 15, 2026
Full time
PCB Assembler Reed Engineering are currently supporting a specialist electronics manufacturer in recruiting a skilled PCB Assembler to join their growing production team. Overview This position plays a vital role in ensuring the successful manufacture of high-quality electronic PCB assemblies and sub-assemblies. The role predominantly focuses on through-hole PCB assembly and soldering to IPC-A-610 Class 2 and 3 standards, alongside inspection, testing, rework, and general assembly duties. Contract: Full-time (flexible working hours between 7am and 10pm) Reporting to: Technical Manager Key Responsibilities Electronic Production Assemble Printed Circuit Boards to a consistently high standard Solder conventional components accurately to IPC-A-610 Class 2 and 3 standards Conduct detailed visual inspections to verify compliance with IPC standards Check completed assemblies to ensure accuracy and quality Perform functional testing on assembled PCBs Maintain accurate production and assembly records Rework Repair or replace conventional components on defective PCBs Test all reworked boards to ensure correct functionality SMT Rework (advantageous) Straighten, repair, or replace SMT components as required Test reworked SMT boards for full functionality AOI Operation (advantageous) Operate Automated Optical Inspection equipment to identify areas requiring rework Box Build (where required) Assemble electronic sub-assemblies quickly and accurately Conduct functional tests on sub-assemblies General Duties Work to high quality standards and follow established procedures Maintain a clean, tidy, and well-organised work environment Support the Technical Manager where needed Provide feedback, reports, and suggestions for continuous improvement Follow all quality management systems and contribute to performance improvements Requirements Technical Requirements Excellent hand-eye coordination and manual dexterity Strong soldering skills Ability to follow instructions accurately and maintain focus Confident using a range of hand and power tools Skills Excellent soldering capability Ability to read and interpret circuit board diagrams Strong component identification skills High attention to detail and accuracy Ability to follow written instructions clearly Personal Traits Strong concentration levels Ability to interpret technical drawings Manual dexterity and steady hand-eye coordination High attention to detail Why Apply? This is an excellent opportunity for a dedicated PCB Assembler to join a supportive technical team, contribute to high-quality production output, and further develop their rework and inspection skills.
We are seeking an experienced Senior Software Engineer to join a fast-growing, innovative organisation at the forefront of semiconductor technology, embedded systems, and capacitive touch solutions. This is an exciting opportunity to lead the design and development of firmware and advanced touch algorithms used in next-generation consumer electronics. You will play a key role in shaping technical direction, mentoring engineers, and delivering high-quality embedded software solutions across the full development lifecycle. Key Responsibilities for this Senior Software Engineer position in Whiteley, Technical Leadership & Project Delivery Lead end-to-end development of embedded software and capacitive sensing algorithms Define and drive software architecture and firmware design decisions Manage project delivery, ensuring timelines, quality, and customer expectations are met Mentor and support junior and mid-level engineers Facilitate Agile/SCRUM processes including sprint planning and retrospectives Collaborate with cross-functional teams including IC design, hardware, and applications Identify and manage technical risks, dependencies, and trade-offs Act as a technical interface with customers, supporting system integration Technical Development Develop firmware using Embedded C and Assembler Perform model-based design using Python, MATLAB, or similar tools Design, simulate, and optimise touch sensing and signal processing algorithms Develop and debug low-level drivers for MCU peripherals Support integration with customer hardware and operating systems Work within a continuous delivery environment for consumer electronics Skills & Experience Essential Degree in Electronics, Computer Science, or Software Engineering (BSc/BEng or equivalent) Extensive experience in embedded software or firmware development Experience in a technical lead or leadership role Strong experience with C programming for embedded systems Solid understanding of software architecture and system design Proven experience delivering complex, cross-functional engineering projects Hands-on debugging and development experience on embedded targets Experience with Git, SVN, or other version control systems Strong communication and stakeholder management skills Desirable Experience with Python, MATLAB, or LabVIEW Knowledge of Digital Signal Processing (DSP) or image processing Familiarity with test-driven development (TDD) and behaviour-driven development (BDD) Experience with defect tracking and task management tools What's on Offer Hybrid working with modern office facilities Private healthcare Mental health and wellbeing support programmes A collaborative, fast-paced engineering environment Opportunities to work on cutting-edge embedded and touch technologies A culture that encourages innovation, learning, and professional growth Why Apply? This is a unique opportunity to take on a technical leadership role in embedded software engineering, working on innovative products that push the boundaries of touch technology, AI data processing, and connected devices. If you are passionate about firmware development, embedded systems, and leading high-performing engineering teams, we'd love to hear from you. If you feel you are the right person for this position in Whiteley, and would like to talk in more detail, please send over your updated cv to (url removed) or call (phone number removed) for more information.
Apr 13, 2026
Full time
We are seeking an experienced Senior Software Engineer to join a fast-growing, innovative organisation at the forefront of semiconductor technology, embedded systems, and capacitive touch solutions. This is an exciting opportunity to lead the design and development of firmware and advanced touch algorithms used in next-generation consumer electronics. You will play a key role in shaping technical direction, mentoring engineers, and delivering high-quality embedded software solutions across the full development lifecycle. Key Responsibilities for this Senior Software Engineer position in Whiteley, Technical Leadership & Project Delivery Lead end-to-end development of embedded software and capacitive sensing algorithms Define and drive software architecture and firmware design decisions Manage project delivery, ensuring timelines, quality, and customer expectations are met Mentor and support junior and mid-level engineers Facilitate Agile/SCRUM processes including sprint planning and retrospectives Collaborate with cross-functional teams including IC design, hardware, and applications Identify and manage technical risks, dependencies, and trade-offs Act as a technical interface with customers, supporting system integration Technical Development Develop firmware using Embedded C and Assembler Perform model-based design using Python, MATLAB, or similar tools Design, simulate, and optimise touch sensing and signal processing algorithms Develop and debug low-level drivers for MCU peripherals Support integration with customer hardware and operating systems Work within a continuous delivery environment for consumer electronics Skills & Experience Essential Degree in Electronics, Computer Science, or Software Engineering (BSc/BEng or equivalent) Extensive experience in embedded software or firmware development Experience in a technical lead or leadership role Strong experience with C programming for embedded systems Solid understanding of software architecture and system design Proven experience delivering complex, cross-functional engineering projects Hands-on debugging and development experience on embedded targets Experience with Git, SVN, or other version control systems Strong communication and stakeholder management skills Desirable Experience with Python, MATLAB, or LabVIEW Knowledge of Digital Signal Processing (DSP) or image processing Familiarity with test-driven development (TDD) and behaviour-driven development (BDD) Experience with defect tracking and task management tools What's on Offer Hybrid working with modern office facilities Private healthcare Mental health and wellbeing support programmes A collaborative, fast-paced engineering environment Opportunities to work on cutting-edge embedded and touch technologies A culture that encourages innovation, learning, and professional growth Why Apply? This is a unique opportunity to take on a technical leadership role in embedded software engineering, working on innovative products that push the boundaries of touch technology, AI data processing, and connected devices. If you are passionate about firmware development, embedded systems, and leading high-performing engineering teams, we'd love to hear from you. If you feel you are the right person for this position in Whiteley, and would like to talk in more detail, please send over your updated cv to (url removed) or call (phone number removed) for more information.
Subject - Electronic Assembler - Cutting-Edge Technology - Paignton Job Title: Assembler Location: Paignton Salary: Competitive Benefits: 25 days annual leave (increasing to 30 with length of service), 4 x life insurance, employer pension contributions starting from 6% up to 14%, single private medical insurance and Medicash plan. The Client: We are working in partnership with a well-established engineering organisation operating within the communications and positioning technology space. They develop advanced electronic systems used in high-performance environments and offer a structured, quality-driven manufacturing setting with a strong focus on continuous improvement. The Candidate: This role would suit someone with hands-on experience in electronics or electrical assembly who enjoys working in a practical, production-based environment. You will be comfortable working with wiring, components, and tools, and take pride in producing high-quality work. You will be detail-oriented, reliable, and able to follow processes and documentation accurately. The Role: As an Assembler, you will be responsible for the assembly, integration, and testing of electronic systems and components. You will support production builds, rework, and repair activities, ensuring products meet required quality and performance standards within a structured manufacturing environment. Key Duties: Assembly of cable assemblies including wiring and semi-rigid cables. Assembly and integration of electronic systems and test racks. Production builds of standard and configured units. Rework, repair, and basic fault finding. Functional testing in line with documented procedures. Completion of production documentation and records. Identification and escalation of quality or process issues. Contribution to continuous improvement and 5S activities. Requirements: Experience in electronics or electrical assembly within a manufacturing environment. Hands-on soldering and mechanical assembly skills. Ability to read wiring diagrams, assembly drawings, and BOMs. Experience working to structured processes and production targets. Strong attention to detail and quality focus. Competent with hand tools and basic test equipment. Reliable, team-oriented, and able to work under pressure. Nice to Have: (Not Essential) Experience working with RF assemblies or signal-based equipment. Previous experience building test racks or complex systems. Familiarity with high-tech or regulated manufacturing environments. Exposure to continuous improvement or 5S practices. To apply for this Electronic Assembler permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
Apr 13, 2026
Full time
Subject - Electronic Assembler - Cutting-Edge Technology - Paignton Job Title: Assembler Location: Paignton Salary: Competitive Benefits: 25 days annual leave (increasing to 30 with length of service), 4 x life insurance, employer pension contributions starting from 6% up to 14%, single private medical insurance and Medicash plan. The Client: We are working in partnership with a well-established engineering organisation operating within the communications and positioning technology space. They develop advanced electronic systems used in high-performance environments and offer a structured, quality-driven manufacturing setting with a strong focus on continuous improvement. The Candidate: This role would suit someone with hands-on experience in electronics or electrical assembly who enjoys working in a practical, production-based environment. You will be comfortable working with wiring, components, and tools, and take pride in producing high-quality work. You will be detail-oriented, reliable, and able to follow processes and documentation accurately. The Role: As an Assembler, you will be responsible for the assembly, integration, and testing of electronic systems and components. You will support production builds, rework, and repair activities, ensuring products meet required quality and performance standards within a structured manufacturing environment. Key Duties: Assembly of cable assemblies including wiring and semi-rigid cables. Assembly and integration of electronic systems and test racks. Production builds of standard and configured units. Rework, repair, and basic fault finding. Functional testing in line with documented procedures. Completion of production documentation and records. Identification and escalation of quality or process issues. Contribution to continuous improvement and 5S activities. Requirements: Experience in electronics or electrical assembly within a manufacturing environment. Hands-on soldering and mechanical assembly skills. Ability to read wiring diagrams, assembly drawings, and BOMs. Experience working to structured processes and production targets. Strong attention to detail and quality focus. Competent with hand tools and basic test equipment. Reliable, team-oriented, and able to work under pressure. Nice to Have: (Not Essential) Experience working with RF assemblies or signal-based equipment. Previous experience building test racks or complex systems. Familiarity with high-tech or regulated manufacturing environments. Exposure to continuous improvement or 5S practices. To apply for this Electronic Assembler permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
Production Operative - (Bonding) £27'995 + Holiday + Pension + Early finish on Friday Monday - Friday (Days) early finish on Friday Brackley Are you Production Operative / Assembler with high levels of dexterity & the ability to perform intricate assembly tasks looking for the next exciting step in your career with a well-established, market leading company?This fantastic company design & manufacture a range of enclosure products & focus on innovative solutions and exceptional customer service to deliver high quality solutions to their loyal client base around the globe.Due to unprecedented growth, they are now looking to add a Production Operative in to their passionate, high performing team in Brackley.In this role you will be working with plastic & electronic products. This will be a hands-on role where you will be bonding & gluing plastic enclosure products alongside general assembly of products within a busy production environment, whilst ensuring a high quality and high productivity of work, to play your part in production targets being met.This is a great opportunity for a Production Operative with previous experience within an intricate assembly environment looking to move in to this field with a continually growing successful company who can offer progression opportunities as they continue to expand. The role: Production Operative - Bonding/Gluing of enclosure products Assembly of products Following quality procedures Focused on high productivity levels & high quality of work The person: Previous experience within an assembly or production role or looking to move into this position Passionate, motivated & target driven, with a high level of dexterity and the ability to perform intricate assembly tasks Looking to work with an industry leading company who offer ongoing training, development & progression whilst having a great reputation with both their customers for the products & services they provide & their employees for providing a great place to work To apply for this role or to be considered for further roles, please click "Apply Now" or contact Sarah Hibberd at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Apr 08, 2026
Full time
Production Operative - (Bonding) £27'995 + Holiday + Pension + Early finish on Friday Monday - Friday (Days) early finish on Friday Brackley Are you Production Operative / Assembler with high levels of dexterity & the ability to perform intricate assembly tasks looking for the next exciting step in your career with a well-established, market leading company?This fantastic company design & manufacture a range of enclosure products & focus on innovative solutions and exceptional customer service to deliver high quality solutions to their loyal client base around the globe.Due to unprecedented growth, they are now looking to add a Production Operative in to their passionate, high performing team in Brackley.In this role you will be working with plastic & electronic products. This will be a hands-on role where you will be bonding & gluing plastic enclosure products alongside general assembly of products within a busy production environment, whilst ensuring a high quality and high productivity of work, to play your part in production targets being met.This is a great opportunity for a Production Operative with previous experience within an intricate assembly environment looking to move in to this field with a continually growing successful company who can offer progression opportunities as they continue to expand. The role: Production Operative - Bonding/Gluing of enclosure products Assembly of products Following quality procedures Focused on high productivity levels & high quality of work The person: Previous experience within an assembly or production role or looking to move into this position Passionate, motivated & target driven, with a high level of dexterity and the ability to perform intricate assembly tasks Looking to work with an industry leading company who offer ongoing training, development & progression whilst having a great reputation with both their customers for the products & services they provide & their employees for providing a great place to work To apply for this role or to be considered for further roles, please click "Apply Now" or contact Sarah Hibberd at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Electronic Hardware Engineer 55 per hour outside IR35 Leicestershire 12 month contract Are you an Electronic Hardware Engineer who has got experience designing electronic hardware from scratch? Have you got experience designing within an R+D Environment? If yes, please read on Essential skillset required: At least 5-10 years experience as an Embedded Electronic Hardware Engineer Ability to programme using Assembler and C language Proven experience in designing Electronic Hardware from inception to completion in an R&D/prototyping Environment Experience in compiling test schedules for R&D products Experience in building test rigs to ensure products are tested to a robust test methodology prior to releasing to production for build If this sounds like a good fit for you please get in touch with Kate Blackwell at JAM as soon as possible. Interviews to take place week commencing 29th September.
Oct 09, 2025
Contractor
Electronic Hardware Engineer 55 per hour outside IR35 Leicestershire 12 month contract Are you an Electronic Hardware Engineer who has got experience designing electronic hardware from scratch? Have you got experience designing within an R+D Environment? If yes, please read on Essential skillset required: At least 5-10 years experience as an Embedded Electronic Hardware Engineer Ability to programme using Assembler and C language Proven experience in designing Electronic Hardware from inception to completion in an R&D/prototyping Environment Experience in compiling test schedules for R&D products Experience in building test rigs to ensure products are tested to a robust test methodology prior to releasing to production for build If this sounds like a good fit for you please get in touch with Kate Blackwell at JAM as soon as possible. Interviews to take place week commencing 29th September.
Position: Mechanical Assembler Rate: 13.50ph - 15.00ph Duration: Temp to Perm Location: Enfield Hours: 07:00am - 16:00pm Proactive are currently recruiting for multiple skilled Assemblers in Enfield to start work immediately. You will be working as part of a wider team delivering projects to meet production targets. If you have experience with any of the following skillsets please get in touch to be considered for this exciting opportunity. Relevant Skills & Experience: Ability to perform mechanical assembly and sub assembly. Experience with fitting of parts or components. Experience with electronic or mechanical testing or inspection. Ability to read and interpret engineering drawings. Use of various hand tools. Previous experience working within an assembly / manufacturing position. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jemal Tawfieg on (phone number removed) or (url removed) Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Oct 07, 2025
Full time
Position: Mechanical Assembler Rate: 13.50ph - 15.00ph Duration: Temp to Perm Location: Enfield Hours: 07:00am - 16:00pm Proactive are currently recruiting for multiple skilled Assemblers in Enfield to start work immediately. You will be working as part of a wider team delivering projects to meet production targets. If you have experience with any of the following skillsets please get in touch to be considered for this exciting opportunity. Relevant Skills & Experience: Ability to perform mechanical assembly and sub assembly. Experience with fitting of parts or components. Experience with electronic or mechanical testing or inspection. Ability to read and interpret engineering drawings. Use of various hand tools. Previous experience working within an assembly / manufacturing position. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jemal Tawfieg on (phone number removed) or (url removed) Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Our client specialises in cable assemble and wiring harness for the defence, automotive and business sectors, they are looking for an Electronic Assembler to join their team. Job Responsibilities Assemble electronic components, circuit boards, and wiring harnesses according to schematics and work instructions Perform soldering Collaborate with engineers and quality assurance teams to resolve assembly issues Job requirements Proven experience in electronic assembly Ability to read and interpret technical drawings Team player with good communication skills
Oct 06, 2025
Seasonal
Our client specialises in cable assemble and wiring harness for the defence, automotive and business sectors, they are looking for an Electronic Assembler to join their team. Job Responsibilities Assemble electronic components, circuit boards, and wiring harnesses according to schematics and work instructions Perform soldering Collaborate with engineers and quality assurance teams to resolve assembly issues Job requirements Proven experience in electronic assembly Ability to read and interpret technical drawings Team player with good communication skills
Electronic Assembler Cirencester 15.78 per hour Our client based in Cirencester are looking for an Electronic Assembler to join their team! Electronic Assembler Roles and Responsibilities: Assembling and wiring of electrical instruments Conducted quality inspections on both populated and bare printed circuit boards (PCBs) Performed Plated Through Hole (PTH) assembly in line with production requirements Soldering Component placement Read and interpret assembly instructions and blueprints Using hand powered tools Meet production standards Building of sub-assemblies as part of the manufacturing process Electronic Assembler Ideal Candidate: Have PTH assembly and component placement experience Previous experience working from assembly instructions / blueprints Experience working as an electronic assembler Electronic Assembler Working Hours and Benefits: Monday - Friday, 07:00 - 16:00 (Flexible) Potential to go permanent for the right candidate Jackie Kerr Recruitment is an independent agency that has been established for 28 years. We strive to provide the ultimate consultancy service to all our candidates. Whether you are looking for permanent or temporary work we pride ourselves in understanding our candidates' requirements to ensure that we place you in your ideal role. We have recently heavily invested in new Recruitment Software that provides an online portal. Simply visit jackiekerrrecruitment. com to enter your details and you will receive job alerts, hot off the press. The portal enables you to update your information and CV at any time, so we always have your latest employment details on record. So please visit our website and let us help you to find your dream job! Please note: At Jackie Kerr Recruitment we receive a huge number of applications for each job that is posted. If you do not hear from us within 2 weeks of your original application, please go to our website jackiekerrrecruitment. com to apply for other jobs that may be suitable to you.
Oct 02, 2025
Seasonal
Electronic Assembler Cirencester 15.78 per hour Our client based in Cirencester are looking for an Electronic Assembler to join their team! Electronic Assembler Roles and Responsibilities: Assembling and wiring of electrical instruments Conducted quality inspections on both populated and bare printed circuit boards (PCBs) Performed Plated Through Hole (PTH) assembly in line with production requirements Soldering Component placement Read and interpret assembly instructions and blueprints Using hand powered tools Meet production standards Building of sub-assemblies as part of the manufacturing process Electronic Assembler Ideal Candidate: Have PTH assembly and component placement experience Previous experience working from assembly instructions / blueprints Experience working as an electronic assembler Electronic Assembler Working Hours and Benefits: Monday - Friday, 07:00 - 16:00 (Flexible) Potential to go permanent for the right candidate Jackie Kerr Recruitment is an independent agency that has been established for 28 years. We strive to provide the ultimate consultancy service to all our candidates. Whether you are looking for permanent or temporary work we pride ourselves in understanding our candidates' requirements to ensure that we place you in your ideal role. We have recently heavily invested in new Recruitment Software that provides an online portal. Simply visit jackiekerrrecruitment. com to enter your details and you will receive job alerts, hot off the press. The portal enables you to update your information and CV at any time, so we always have your latest employment details on record. So please visit our website and let us help you to find your dream job! Please note: At Jackie Kerr Recruitment we receive a huge number of applications for each job that is posted. If you do not hear from us within 2 weeks of your original application, please go to our website jackiekerrrecruitment. com to apply for other jobs that may be suitable to you.
Assembler Assembler Build Your Future with a Leading Manufacturer! Location: Ashford Job Type: Full-Time Salary: Up to £30,000 Electromechanical needed! Mechanical Assemblers needed! Electronics Assemblers needed! Working Hours: Monday to Thursday: 7:30 AM 4:30 PM Friday Finish: 7:30 AM 1:00 PM start your weekend early! About the Assembler Role: Are you a skilled Assembler ready to take the next step in your career? Join a respected and forward-thinking manufacturer in the engineering space. We re looking for a reliable, detail-oriented Assembler to support our growing production team. If you enjoy hands-on work and thrive in a fast-paced environment, this Assembler role could be the perfect fit. ï Key Responsibilities of the Assembler: Assemble components and products using technical drawings and instructions. Perform quality inspections to ensure each build meets our high standards. Use hand tools and equipment with confidence and care. Work collaboratively with other team members to maintain efficient production. Keep your work area clean, safe, and compliant with health & safety practices. Report any faults or issues during the assembly process promptly. Why Join Us as an Assembler? Competitive salary up to £30k ï Pension scheme & life assurance Career development in a growing company Enjoy an early finish every Friday Take the next step in your career as an Assembler bring your talent to a team that values precision, quality, and your contribution. Apply now to become our newest Assembler! INDMAN
Oct 02, 2025
Full time
Assembler Assembler Build Your Future with a Leading Manufacturer! Location: Ashford Job Type: Full-Time Salary: Up to £30,000 Electromechanical needed! Mechanical Assemblers needed! Electronics Assemblers needed! Working Hours: Monday to Thursday: 7:30 AM 4:30 PM Friday Finish: 7:30 AM 1:00 PM start your weekend early! About the Assembler Role: Are you a skilled Assembler ready to take the next step in your career? Join a respected and forward-thinking manufacturer in the engineering space. We re looking for a reliable, detail-oriented Assembler to support our growing production team. If you enjoy hands-on work and thrive in a fast-paced environment, this Assembler role could be the perfect fit. ï Key Responsibilities of the Assembler: Assemble components and products using technical drawings and instructions. Perform quality inspections to ensure each build meets our high standards. Use hand tools and equipment with confidence and care. Work collaboratively with other team members to maintain efficient production. Keep your work area clean, safe, and compliant with health & safety practices. Report any faults or issues during the assembly process promptly. Why Join Us as an Assembler? Competitive salary up to £30k ï Pension scheme & life assurance Career development in a growing company Enjoy an early finish every Friday Take the next step in your career as an Assembler bring your talent to a team that values precision, quality, and your contribution. Apply now to become our newest Assembler! INDMAN
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 500 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. As part of the global entity Saab AB, Saab UK combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Globally, Saab employs over 22,000 people, with operations on every continent. Our partnerships with UK customers and industry mean we are able to deliver innovative solutions to complex challenges, anticipating the threats of tomorrow. We invest 23% of our annual revenue into research and development, collaborating with a range of partners including industry and academia. Saab is a company that offers our employees plenty of opportunities for growth and advancement. We embrace diversity and are committed to providing a workplace where individuals can thrive professionally, paving the way for future progression. We also recognise the need for a healthy work-life balance to ensure our staff have the chance to live a fulfilling life beyond the workplace. The Role: This role sits within our Sensor Systems Business Unit. We are looking for an Electrical Assembler to work on the manufacturing of electronic equipment, through assembly of mechanics and electronics in a small production unit. Your personal skills are important where we have high expectations in cooperation and communication within your team and organization. Main Duties: Electromechanical assembly and soldering. Read and understand technical documents for manufacturing purpose. Handling of documents and non conformancies according to stated processes. Contribute with continuous improvements within quality, delivery and cost. Take part in education and support of new employees. In a clear way be able to communicate status of ongoing work which you are responsible for. Skills and Experience: A social and good team player. 3+ years of relevant experience within electromechanical assembly or production. Manual soldering skills. Excellent communication skills in English, verbal and written. High expectations regarding fine motor skills, endurance and accuracy. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Oct 02, 2025
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 500 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. As part of the global entity Saab AB, Saab UK combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Globally, Saab employs over 22,000 people, with operations on every continent. Our partnerships with UK customers and industry mean we are able to deliver innovative solutions to complex challenges, anticipating the threats of tomorrow. We invest 23% of our annual revenue into research and development, collaborating with a range of partners including industry and academia. Saab is a company that offers our employees plenty of opportunities for growth and advancement. We embrace diversity and are committed to providing a workplace where individuals can thrive professionally, paving the way for future progression. We also recognise the need for a healthy work-life balance to ensure our staff have the chance to live a fulfilling life beyond the workplace. The Role: This role sits within our Sensor Systems Business Unit. We are looking for an Electrical Assembler to work on the manufacturing of electronic equipment, through assembly of mechanics and electronics in a small production unit. Your personal skills are important where we have high expectations in cooperation and communication within your team and organization. Main Duties: Electromechanical assembly and soldering. Read and understand technical documents for manufacturing purpose. Handling of documents and non conformancies according to stated processes. Contribute with continuous improvements within quality, delivery and cost. Take part in education and support of new employees. In a clear way be able to communicate status of ongoing work which you are responsible for. Skills and Experience: A social and good team player. 3+ years of relevant experience within electromechanical assembly or production. Manual soldering skills. Excellent communication skills in English, verbal and written. High expectations regarding fine motor skills, endurance and accuracy. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Wiring and Mechanical Assembler - Poole TeamJobs are currently working with a fantastic company, recruiting for additional Wiring and Mechanical Assemblers to join their team on a temporary ongoing basis. Responsibilities Prepare and assemble electronic and mechanical parts Follow technical instructions and drawings Ensure assembled products meet quality standards Use of a variety of hand tools Adhere to health and safety regulations Requirements Ideally you will have experience within a assembly role Ability to read and interpret technical drawings and diagrams Basic computer skills Hours & Pay 37.5 hours per week - overtime available! Between 6:30 and 9:30 and finish between 15:30 and 18:30 with the option of finishing at 12:30 on Friday assuming you have worked 37.5 hours 12.70 per hour Why work for TeamJobs? Weekly pay (every Friday) Training & progression provided Overtime available PPE provided If you are interested in this opportunity, please click 'apply' today and the team will be in touch to discuss further! INDIT
Oct 01, 2025
Seasonal
Wiring and Mechanical Assembler - Poole TeamJobs are currently working with a fantastic company, recruiting for additional Wiring and Mechanical Assemblers to join their team on a temporary ongoing basis. Responsibilities Prepare and assemble electronic and mechanical parts Follow technical instructions and drawings Ensure assembled products meet quality standards Use of a variety of hand tools Adhere to health and safety regulations Requirements Ideally you will have experience within a assembly role Ability to read and interpret technical drawings and diagrams Basic computer skills Hours & Pay 37.5 hours per week - overtime available! Between 6:30 and 9:30 and finish between 15:30 and 18:30 with the option of finishing at 12:30 on Friday assuming you have worked 37.5 hours 12.70 per hour Why work for TeamJobs? Weekly pay (every Friday) Training & progression provided Overtime available PPE provided If you are interested in this opportunity, please click 'apply' today and the team will be in touch to discuss further! INDIT
Looking for a hands-on part-time engineering role with variety, flexibility, and great benefits? Join Weald Electronics in Slinfold as a Mechanical Engineer / QC Inspector today! Mechanical EngineerSlinfold, West Sussex 23 - 24.75 hours per week over three days £14 - £14.75 per hour Permanent contract Please Note: Applicants must be authorised to work in the UK Weald Electronics Ltd, part of The Lodge Group, is a trusted manufacturer of high-performance connectors and electro-mechanical assemblies. Known for quality, innovation, and reliability, we support industries where precision is critical. With a supportive culture and opportunities to grow, this is an exciting time to join our dedicated team. The Role We're looking for a skilled Mechanical Engineer / QC Inspector to support our Production, Engineering, and Quality departments. The role is varied, offering plenty of hands-on tasks while also playing a vital role in inspection and quality assurance. Key Responsibilities: Maintain and repair assembly jigs and small tools Manufacture and adapt simple tooling for production Carry out small batch modifications using lathes, drills, milling machines, and hand tools Prototype new parts for testing and evaluation Support the QA department with timely and accurate inspection of sub-assemblies and incoming goods Record inspection results and complete non-conformance reports when required Provide feedback to the Quality Manager to support continuous improvement Operate at all times to company's quality and health & safety standards Benefits: Competitive hourly rate: £14.00 - £14.75 (depending on experience) Contributory pension scheme 23 days holiday + bank holidays (pro rata) Holiday entitlement increases with service (up to 25 days) Paid Christmas closure 2x discretionary annual bonuses (June & December) Employee assistance programme with 24/7 helpline, wellbeing app & discounts Free onsite parking The Ideal Candidate We're looking for a practical engineer with a strong mechanical background and a proactive, adaptable approach. You'll be someone who takes pride in accuracy and can balance both production and quality tasks. About you: Due to the location of this role, applicants must have a valid driving licence and access to their own vehicle Able to interpret technical drawings Previous hands-on experience in machining, toolmaking, or precision engineering Skilled in the use of lathes, drills, mills, and other workshop tools Familiar with mechanical and optical measuring equipment High attention to detail and accuracy Flexible, adaptable, and keen to learn new skills Basic IT skills This is a fantastic opportunity to join a stable, friendly company where you'll receive a full handover before the current post-holder retires. How to apply for the role: If you have the skills and experience required for this position, click "apply" today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. No agencies please. Other suitable skills and experience include Mechanical Technician, Quality Inspector, Toolmaker, Maintenance Engineer, Machinist, CNC Operator, Production Engineer, Mechanical Assembler, Quality Engineer, Fitter/Turner
Sep 26, 2025
Full time
Looking for a hands-on part-time engineering role with variety, flexibility, and great benefits? Join Weald Electronics in Slinfold as a Mechanical Engineer / QC Inspector today! Mechanical EngineerSlinfold, West Sussex 23 - 24.75 hours per week over three days £14 - £14.75 per hour Permanent contract Please Note: Applicants must be authorised to work in the UK Weald Electronics Ltd, part of The Lodge Group, is a trusted manufacturer of high-performance connectors and electro-mechanical assemblies. Known for quality, innovation, and reliability, we support industries where precision is critical. With a supportive culture and opportunities to grow, this is an exciting time to join our dedicated team. The Role We're looking for a skilled Mechanical Engineer / QC Inspector to support our Production, Engineering, and Quality departments. The role is varied, offering plenty of hands-on tasks while also playing a vital role in inspection and quality assurance. Key Responsibilities: Maintain and repair assembly jigs and small tools Manufacture and adapt simple tooling for production Carry out small batch modifications using lathes, drills, milling machines, and hand tools Prototype new parts for testing and evaluation Support the QA department with timely and accurate inspection of sub-assemblies and incoming goods Record inspection results and complete non-conformance reports when required Provide feedback to the Quality Manager to support continuous improvement Operate at all times to company's quality and health & safety standards Benefits: Competitive hourly rate: £14.00 - £14.75 (depending on experience) Contributory pension scheme 23 days holiday + bank holidays (pro rata) Holiday entitlement increases with service (up to 25 days) Paid Christmas closure 2x discretionary annual bonuses (June & December) Employee assistance programme with 24/7 helpline, wellbeing app & discounts Free onsite parking The Ideal Candidate We're looking for a practical engineer with a strong mechanical background and a proactive, adaptable approach. You'll be someone who takes pride in accuracy and can balance both production and quality tasks. About you: Due to the location of this role, applicants must have a valid driving licence and access to their own vehicle Able to interpret technical drawings Previous hands-on experience in machining, toolmaking, or precision engineering Skilled in the use of lathes, drills, mills, and other workshop tools Familiar with mechanical and optical measuring equipment High attention to detail and accuracy Flexible, adaptable, and keen to learn new skills Basic IT skills This is a fantastic opportunity to join a stable, friendly company where you'll receive a full handover before the current post-holder retires. How to apply for the role: If you have the skills and experience required for this position, click "apply" today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. No agencies please. Other suitable skills and experience include Mechanical Technician, Quality Inspector, Toolmaker, Maintenance Engineer, Machinist, CNC Operator, Production Engineer, Mechanical Assembler, Quality Engineer, Fitter/Turner
Position: Electronics Assembler Salary: 27,000 - 28,000 Location: Waterbeach Hours: Monday to Friday - 08:00am- 16:00pm Proactive are currently recruiting for multiple experienced Electronic Assemblers to begin work for a leading engineering company based in Waterbeach. This is an exciting opportunity working for a world leader in the design, manufacture, assembly and distribution of high quality electronic devices. Role Description This is a full-time on-site role for an electronic assembler located in Waterbeach. Reporting directly to the Production Manager, the Manufacturing Technician will be responsible for executing manufacturing processes (written, verbal and using assembly drawings), working within a small team as well as independently, maintaining their workspace, ensuring work is carried out to meet our quality standards, troubleshooting, and communicating effectively with colleagues and management. Requirements/Experience Experience in electro-mechanical assembly. Experience with soldering is essential Excellent communication skills, both written and verbal Experience in Manufacturing Processes and techniques Ability to follow standard operating procedures, work instructions, drawings and work under pressure Wiring and cable assembly experience The ability to adapt to flexible work priorities and multitask. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jemal Tawfieg on (phone number removed) or (url removed) Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Sep 23, 2025
Full time
Position: Electronics Assembler Salary: 27,000 - 28,000 Location: Waterbeach Hours: Monday to Friday - 08:00am- 16:00pm Proactive are currently recruiting for multiple experienced Electronic Assemblers to begin work for a leading engineering company based in Waterbeach. This is an exciting opportunity working for a world leader in the design, manufacture, assembly and distribution of high quality electronic devices. Role Description This is a full-time on-site role for an electronic assembler located in Waterbeach. Reporting directly to the Production Manager, the Manufacturing Technician will be responsible for executing manufacturing processes (written, verbal and using assembly drawings), working within a small team as well as independently, maintaining their workspace, ensuring work is carried out to meet our quality standards, troubleshooting, and communicating effectively with colleagues and management. Requirements/Experience Experience in electro-mechanical assembly. Experience with soldering is essential Excellent communication skills, both written and verbal Experience in Manufacturing Processes and techniques Ability to follow standard operating procedures, work instructions, drawings and work under pressure Wiring and cable assembly experience The ability to adapt to flexible work priorities and multitask. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jemal Tawfieg on (phone number removed) or (url removed) Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
