Bennett and Game are pleased to represent a leading civil and structural engineering consultancy seeking a Senior / Principal Civil Engineering Technician to join their expanding design team in Fareham. This is a key technical role offering long-term progression, exposure to complex development-led schemes, and the opportunity to take ownership of CAD standards and team mentoring across highways a click apply for full job details
Mar 18, 2026
Full time
Bennett and Game are pleased to represent a leading civil and structural engineering consultancy seeking a Senior / Principal Civil Engineering Technician to join their expanding design team in Fareham. This is a key technical role offering long-term progression, exposure to complex development-led schemes, and the opportunity to take ownership of CAD standards and team mentoring across highways a click apply for full job details
12 Month Contract Inside IR35 £36.26 - £41.41 per hour umbrella Ideally 2 days per week on site but open to fully remote working where required Job Role: Operating as a senior designer within a team of up to 25 resources, the position holder will have high design technical capability and demonstrate exemplar behaviours as a role model within the team Progress complex design activities through to completion using design tools (eg CAD) and advise and coach team members and early careers through their activities, and where applicable support colleagues through mentoring. Check and assure other team members work on behalf of the Principal Detail Designer including final sign off of engineering outputs and creation of Quality Care Points and Alerts as identified during checking. Fully conversant with all Detail Design processes and Management Systems and can advise and guide team members through application of them. Including supporting external and internal audits. Strong understanding of the design lifecycle and the value stream within the discipline (i.e. Conceptual Design through to Commissioning and Acceptance) Will deputise for the Principal Detail Designer when required at key management meetings and stand in as the line manager of the team when the Principal is unavailable due to holidays or sickness. Able to advise Principal Designer on Technical Matters and assist with decision making process. Key Attributes: Able to perform robust analysis using recognised detail modelling, documentation and analytical tools and to make sound judgements based on experience. Has sufficient breadth of knowledge of warship design and the sound judgement needed to be able make correct trade-off decisions Provide technical support and troubleshooting responses in assigned areas to operational units or other activities. Possesses ability to check other people s outputs and assure quality Possesses ability to feedback verbally and in writing outcomes of quality checks where quality has been compromised. Key Skills / Qualifications: Experienced in the use of FORAN design software (preferred) Previous Electrical Design experience Understanding of the business Operational Framework, the Engineering Framework and the Detail Design Framework - in particular recognition of the Detail Design organisational design and the demarcation of roles and communication channels. Understanding of how team integrates with other Detail Design sub-disciplines and how the team integrates with the wider stakeholder community. Experience in engineering, design or a defence or related industry Good working experiences in more than one phase of the LCM, with sufficient experience of the total LCM to enable a good understanding of adjacent phases and through life engineering issues Typically HNC/HND qualified, likely to be in a technology, engineering or science related discipline plus Technical VQ Qualification Meet the requirements for registration as Technician or Incorporated Engineer with the Engineering Council and preferably be a member of a relevant Professional Body
Mar 18, 2026
Contractor
12 Month Contract Inside IR35 £36.26 - £41.41 per hour umbrella Ideally 2 days per week on site but open to fully remote working where required Job Role: Operating as a senior designer within a team of up to 25 resources, the position holder will have high design technical capability and demonstrate exemplar behaviours as a role model within the team Progress complex design activities through to completion using design tools (eg CAD) and advise and coach team members and early careers through their activities, and where applicable support colleagues through mentoring. Check and assure other team members work on behalf of the Principal Detail Designer including final sign off of engineering outputs and creation of Quality Care Points and Alerts as identified during checking. Fully conversant with all Detail Design processes and Management Systems and can advise and guide team members through application of them. Including supporting external and internal audits. Strong understanding of the design lifecycle and the value stream within the discipline (i.e. Conceptual Design through to Commissioning and Acceptance) Will deputise for the Principal Detail Designer when required at key management meetings and stand in as the line manager of the team when the Principal is unavailable due to holidays or sickness. Able to advise Principal Designer on Technical Matters and assist with decision making process. Key Attributes: Able to perform robust analysis using recognised detail modelling, documentation and analytical tools and to make sound judgements based on experience. Has sufficient breadth of knowledge of warship design and the sound judgement needed to be able make correct trade-off decisions Provide technical support and troubleshooting responses in assigned areas to operational units or other activities. Possesses ability to check other people s outputs and assure quality Possesses ability to feedback verbally and in writing outcomes of quality checks where quality has been compromised. Key Skills / Qualifications: Experienced in the use of FORAN design software (preferred) Previous Electrical Design experience Understanding of the business Operational Framework, the Engineering Framework and the Detail Design Framework - in particular recognition of the Detail Design organisational design and the demarcation of roles and communication channels. Understanding of how team integrates with other Detail Design sub-disciplines and how the team integrates with the wider stakeholder community. Experience in engineering, design or a defence or related industry Good working experiences in more than one phase of the LCM, with sufficient experience of the total LCM to enable a good understanding of adjacent phases and through life engineering issues Typically HNC/HND qualified, likely to be in a technology, engineering or science related discipline plus Technical VQ Qualification Meet the requirements for registration as Technician or Incorporated Engineer with the Engineering Council and preferably be a member of a relevant Professional Body
CAD Manager Croydon Hybrid - 4 days in office, Wednesday WFH 50,000- 70,000 + discretionary annual bonus, 25 days holiday + bank holidays, 3% pension, mileage reimbursement Are you a technically strong CAD professional with managerial or team leader experience looking to step into a great Senior Position? Do you want a role where you can be 50% hands-on, 50% managerial, working across exciting residential, commercial, and education projects? My client is a Croydon-based consulting engineering firm specialising in MEP design across a wide range of projects - from schools and hospitals to commercial and residential developments. They pride themselves on technical excellence and collaboration, with strong links between their UK and Manila offices, ensuring coordinated and timely delivery on every project. My client is looking for a CAD Manager to lead a team of six. The role is 50% hands-on CAD work and 50% managerial, involving mentoring, technical guidance, and workflow oversight. The successful candidate will liaise with engineers and the Manila office, produce high-quality MEP drawings, and occasionally attend site visits (approx. once every two weeks). The ideal candidate is a confident, hands-on CAD professional with strong leadership skills and a proven track record managing small teams. They will be highly organised, technically competent in MEP design, and experienced with AutoCAD (Revit/Navisworks desirable). Comfortable working across multiple time zones, they are able to delegate effectively, mentor team members, and maintain high-quality standards, while also being willing to jump into projects and contribute directly when needed. The Person: Experienced in managing CAD teams (2-5 years minimum management experience) Confident in AutoCAD (essential); Revit and Navisworks preferred MEP building services experience across a broad mix of projects (residential, commercial, education, hospitals) Strong communicator, organised, and able to manage teams across multiple time zones Hands-on attitude - happy to contribute to projects directly, not just manage Key Responsibilities: Produce accurate, coordinated MEP drawings and models Manage and mentor a team of six CAD technicians Liaise with engineers and Manila office for daily CAD requests Ensure all drawings meet QA, BIM, and industry standards Participate in design meetings and occasional site visits Reference Number: BH (phone number removed) To apply for this role or to be considered for further positions, please click Apply Now or contact Maleek Randley at Rise Technical Recruitment . Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Mar 18, 2026
Full time
CAD Manager Croydon Hybrid - 4 days in office, Wednesday WFH 50,000- 70,000 + discretionary annual bonus, 25 days holiday + bank holidays, 3% pension, mileage reimbursement Are you a technically strong CAD professional with managerial or team leader experience looking to step into a great Senior Position? Do you want a role where you can be 50% hands-on, 50% managerial, working across exciting residential, commercial, and education projects? My client is a Croydon-based consulting engineering firm specialising in MEP design across a wide range of projects - from schools and hospitals to commercial and residential developments. They pride themselves on technical excellence and collaboration, with strong links between their UK and Manila offices, ensuring coordinated and timely delivery on every project. My client is looking for a CAD Manager to lead a team of six. The role is 50% hands-on CAD work and 50% managerial, involving mentoring, technical guidance, and workflow oversight. The successful candidate will liaise with engineers and the Manila office, produce high-quality MEP drawings, and occasionally attend site visits (approx. once every two weeks). The ideal candidate is a confident, hands-on CAD professional with strong leadership skills and a proven track record managing small teams. They will be highly organised, technically competent in MEP design, and experienced with AutoCAD (Revit/Navisworks desirable). Comfortable working across multiple time zones, they are able to delegate effectively, mentor team members, and maintain high-quality standards, while also being willing to jump into projects and contribute directly when needed. The Person: Experienced in managing CAD teams (2-5 years minimum management experience) Confident in AutoCAD (essential); Revit and Navisworks preferred MEP building services experience across a broad mix of projects (residential, commercial, education, hospitals) Strong communicator, organised, and able to manage teams across multiple time zones Hands-on attitude - happy to contribute to projects directly, not just manage Key Responsibilities: Produce accurate, coordinated MEP drawings and models Manage and mentor a team of six CAD technicians Liaise with engineers and Manila office for daily CAD requests Ensure all drawings meet QA, BIM, and industry standards Participate in design meetings and occasional site visits Reference Number: BH (phone number removed) To apply for this role or to be considered for further positions, please click Apply Now or contact Maleek Randley at Rise Technical Recruitment . Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Job Title: Electrical Technician Job Location: Goole, East Riding of Yorkshire Shifts: Monday - Friday Mornings 06:00-14:30 / Afternoons 14:30-22:30 (Friday Finish at 20:00) Hourly Rate: £18.86 PAYEHours Per Week: 40 Avg. Company Summary In partnership with Siemens Mobility we are recruiting for a large team of electrical assemblers to build London's new fleet of underground stock, the Piccadilly line. This is one of the industries most exciting projects to be involved in, helping manufacture London's newest tube fleet. This will involve working out of Siemens Mobility's brand new state-of-the-art facility purpose built for this project! Position Summary: As an Electrical Assembler, you will be experienced working in a safe manner, adhering to Siemens 4 steps to zero harm. You will be carrying out assembly tasks on electro-mechanical parts, components, assemblies/sub-assemblies. and interiors of trains for the world famous London Underground. Responsibilities Include: Crimping and termination of electrical looms or similar Connecting Plug Assembly to plan Cable routing to layout plans Documentation of activities (Glass or Paper systems) Working closely to production instructions including all correct tooling Conduct regular quality, sight and functionality tests Person Profile: Experience working within a manufacturing, maintenance or overhaul environment. We are ideally looking for someone with an appropriate level 3 electrical qualification or 18th Edition Ideally you will be familiar with ERP systems, with a preference of SAP You will be a self-starter, with strong organizational skills able to work both independently and in a team environment. Contact Details: Email: Phone Number: We value your unique identity and perspective and are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society. Come bring your authentic self and create a better tomorrow with us!Siemens promote a growth mindset, the self-belief that we can learn and grow, take on new challenges and adapt to change. If you don't match all the criteria for this role but feel you have transferable skills to enable you to succeed, we encourage you to apply.
Mar 18, 2026
Contractor
Job Title: Electrical Technician Job Location: Goole, East Riding of Yorkshire Shifts: Monday - Friday Mornings 06:00-14:30 / Afternoons 14:30-22:30 (Friday Finish at 20:00) Hourly Rate: £18.86 PAYEHours Per Week: 40 Avg. Company Summary In partnership with Siemens Mobility we are recruiting for a large team of electrical assemblers to build London's new fleet of underground stock, the Piccadilly line. This is one of the industries most exciting projects to be involved in, helping manufacture London's newest tube fleet. This will involve working out of Siemens Mobility's brand new state-of-the-art facility purpose built for this project! Position Summary: As an Electrical Assembler, you will be experienced working in a safe manner, adhering to Siemens 4 steps to zero harm. You will be carrying out assembly tasks on electro-mechanical parts, components, assemblies/sub-assemblies. and interiors of trains for the world famous London Underground. Responsibilities Include: Crimping and termination of electrical looms or similar Connecting Plug Assembly to plan Cable routing to layout plans Documentation of activities (Glass or Paper systems) Working closely to production instructions including all correct tooling Conduct regular quality, sight and functionality tests Person Profile: Experience working within a manufacturing, maintenance or overhaul environment. We are ideally looking for someone with an appropriate level 3 electrical qualification or 18th Edition Ideally you will be familiar with ERP systems, with a preference of SAP You will be a self-starter, with strong organizational skills able to work both independently and in a team environment. Contact Details: Email: Phone Number: We value your unique identity and perspective and are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society. Come bring your authentic self and create a better tomorrow with us!Siemens promote a growth mindset, the self-belief that we can learn and grow, take on new challenges and adapt to change. If you don't match all the criteria for this role but feel you have transferable skills to enable you to succeed, we encourage you to apply.
Konker is currently recruiting for an Architectural Technician to join an award-winning architectural practice based in Romsey. This practice has three studios across the UK and employs a group of roughly 70 staff members. Due to winning two substantial projects and securing new business, they are recruiting two dedicated Architectural Technicians of an intermediate level to join their technical team. Projects wise they work on anything related to the residential developer sector including care homes, retirement villages, small-medium and large housing schemes, master planning, and urban design. The role of Architectural Technician will be within the technical team and involve producing building regulations and working on residential developer work multi-units. Applicants would be expected to have good knowledge of robust details, lifetime homes, and building regulations. In addition, UK residential development experience and the ability to use Revit is required in these technical roles. Due to a lack of public transport links near the studio, candidates are required to have their own car and driving license. The Role: Architectural Technician (Technical Team) Developing House Types and Block Plans Produce detailed drawings to the construction phase Prepare layouts, drawings, and sketches while complying with the latest regulations Interpreting and acting on client briefs Use AutoCAD and SketchUp Work within a busy technical team The salary for this position ranges from £30,000 to £40,000, depending on previous experience, and they offer regular mentoring and support, if needed. Company Benefits: Offer hybrid working, 2 days in the office and 3 days at home 5% Pension Contribution Flexible start/finish times Discretionary Bonus Private healthcare Twice Salary reviews Regular CPD s and Social events For more information, contact Curtis Hunter at Konker Group. Alternatively, please visit our website for all our latest architectural jobs.
Mar 17, 2026
Full time
Konker is currently recruiting for an Architectural Technician to join an award-winning architectural practice based in Romsey. This practice has three studios across the UK and employs a group of roughly 70 staff members. Due to winning two substantial projects and securing new business, they are recruiting two dedicated Architectural Technicians of an intermediate level to join their technical team. Projects wise they work on anything related to the residential developer sector including care homes, retirement villages, small-medium and large housing schemes, master planning, and urban design. The role of Architectural Technician will be within the technical team and involve producing building regulations and working on residential developer work multi-units. Applicants would be expected to have good knowledge of robust details, lifetime homes, and building regulations. In addition, UK residential development experience and the ability to use Revit is required in these technical roles. Due to a lack of public transport links near the studio, candidates are required to have their own car and driving license. The Role: Architectural Technician (Technical Team) Developing House Types and Block Plans Produce detailed drawings to the construction phase Prepare layouts, drawings, and sketches while complying with the latest regulations Interpreting and acting on client briefs Use AutoCAD and SketchUp Work within a busy technical team The salary for this position ranges from £30,000 to £40,000, depending on previous experience, and they offer regular mentoring and support, if needed. Company Benefits: Offer hybrid working, 2 days in the office and 3 days at home 5% Pension Contribution Flexible start/finish times Discretionary Bonus Private healthcare Twice Salary reviews Regular CPD s and Social events For more information, contact Curtis Hunter at Konker Group. Alternatively, please visit our website for all our latest architectural jobs.
Astute's Power team is partnering with a leading Energy from Waste company in the UK to recruit an Electrical Controls and Instrumentation Technician for its site in North Yorkshire. The EC&I Technician role comes with a starting salary of up to 48,000 and a bonus. If you are an apprentice trained EC&I Technician with experience on heavy industrial sites and looking to work then submit your CV to apply today. Responsibilities and duties of the Electrical, Controls and Instrumentation Technician role Reporting to the Maintenance Manager you will: Perform fault finding and rectification on electrical, control, and instrumentation equipment. Execute planned preventative maintenance (PPM) and reactive maintenance tasks to the highest standards. Manage a delegated plant area, including planned outages and scheduled maintenance activities. Ensure all client specifications and requirements are consistently met and maintained. Assist in planned outages and shutdown activities, supporting the maintenance team's objectives. Report maintenance issues promptly through line management to ensure timely resolution. Accurately complete maintenance documentation using the Computerised Maintenance Management System (CMMS). Support the Lead EC&I Engineer with ordering and managing critical spares inventory. Participate actively in team briefings, toolbox talks, and continuous safety meetings. Adhere strictly to site safety rules and health, safety, quality, and environmental policies at all times. Professional qualifications We are looking for someone with the following: Recognised Electrical Engineering apprenticeship to NVQ Level 3 or equivalent (Electrical HNC desirable). Proven experience in fault finding and calibration of instrumentation (level, temperature, pressure, flow) and control systems including DCS, SCADA, and PLCs. Skilled in working with control panels, wiring standards, motors, switchgear, variable speed drives, and circuit breakers. Ability to read and interpret EC&I drawings, documents, and work safely under permit-to-work systems and risk assessments. Experience working in fast-paced environments, managing planned and reactive maintenance to tight deadlines. Personal skills Strong attention to detail with a commitment to quality workmanship. Excellent problem-solving skills with a proactive approach to identifying and fixing issues. Good communication and interpersonal skills to work collaboratively with the team and clients. Salary and benefits of the EC&I Technician role Starting salary of up to 48,000 Benefits package including bonus of us to 5% Progression opportunities INDPOW Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Mar 17, 2026
Full time
Astute's Power team is partnering with a leading Energy from Waste company in the UK to recruit an Electrical Controls and Instrumentation Technician for its site in North Yorkshire. The EC&I Technician role comes with a starting salary of up to 48,000 and a bonus. If you are an apprentice trained EC&I Technician with experience on heavy industrial sites and looking to work then submit your CV to apply today. Responsibilities and duties of the Electrical, Controls and Instrumentation Technician role Reporting to the Maintenance Manager you will: Perform fault finding and rectification on electrical, control, and instrumentation equipment. Execute planned preventative maintenance (PPM) and reactive maintenance tasks to the highest standards. Manage a delegated plant area, including planned outages and scheduled maintenance activities. Ensure all client specifications and requirements are consistently met and maintained. Assist in planned outages and shutdown activities, supporting the maintenance team's objectives. Report maintenance issues promptly through line management to ensure timely resolution. Accurately complete maintenance documentation using the Computerised Maintenance Management System (CMMS). Support the Lead EC&I Engineer with ordering and managing critical spares inventory. Participate actively in team briefings, toolbox talks, and continuous safety meetings. Adhere strictly to site safety rules and health, safety, quality, and environmental policies at all times. Professional qualifications We are looking for someone with the following: Recognised Electrical Engineering apprenticeship to NVQ Level 3 or equivalent (Electrical HNC desirable). Proven experience in fault finding and calibration of instrumentation (level, temperature, pressure, flow) and control systems including DCS, SCADA, and PLCs. Skilled in working with control panels, wiring standards, motors, switchgear, variable speed drives, and circuit breakers. Ability to read and interpret EC&I drawings, documents, and work safely under permit-to-work systems and risk assessments. Experience working in fast-paced environments, managing planned and reactive maintenance to tight deadlines. Personal skills Strong attention to detail with a commitment to quality workmanship. Excellent problem-solving skills with a proactive approach to identifying and fixing issues. Good communication and interpersonal skills to work collaboratively with the team and clients. Salary and benefits of the EC&I Technician role Starting salary of up to 48,000 Benefits package including bonus of us to 5% Progression opportunities INDPOW Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Structural Engineer - Contract (Inside IR35) Duration: 12 months This role combines responsibilities across Assistant, Senior, and Lead Structural Engineering levels. Overview An opportunity is available for Structural Engineers at varying experience levels to support and deliver building structures projects. The role involves contributing to high-quality engineering design, governance, and performance across a diverse project portfolio. Key Responsibilities Core Responsibilities (All Levels) Produce engineering deliverables including calculations, reports, drawings, and documentation. Apply structural engineering principles and relevant standards, including Eurocodes and Building Regulations. Use design and analysis software such as 3D CAD tools, Tekla Structural Designer, and Tekla Tedds. Support compliance with technical governance, safety legislation (including CDM 2015), and quality processes. Communicate effectively within project teams and with stakeholders. Additional Responsibilities for Mid-Level / Senior Engineers Provide guidance and mentoring to junior engineers and technicians. Manage programme and quality performance across assigned schemes. Engage professionally with clients and stakeholders. Lead work packages or small project teams, ensuring technical accuracy. Additional Responsibilities for Lead Engineers Lead teams delivering multiple or complex structural projects. Provide high-level technical leadership, ensuring compliance with governance and quality frameworks. Coordinate with senior stakeholders to guide project strategy and risk management. Promote technical excellence and best practice across engineering functions. Qualifications & Experience Assistant-Level Requirements Typically 4+ years of building structures design experience. Ability to apply engineering theory under supervision. Working knowledge of design software and relevant codes. Progression toward Incorporated or Chartered status. Senior-Level Requirements Typically 10+ years of building structures experience. Ability to lead small teams and manage technical outputs. Extensive experience with 3D modelling and Tekla software. Incorporated or Chartered, or actively working towards it. Lead-Level Requirements Extensive experience including leadership of multi-disciplinary projects. Chartered status with a relevant engineering institution. Experience managing design governance and project performance. Strong stakeholder engagement and decision-making capabilities.
Mar 17, 2026
Contractor
Structural Engineer - Contract (Inside IR35) Duration: 12 months This role combines responsibilities across Assistant, Senior, and Lead Structural Engineering levels. Overview An opportunity is available for Structural Engineers at varying experience levels to support and deliver building structures projects. The role involves contributing to high-quality engineering design, governance, and performance across a diverse project portfolio. Key Responsibilities Core Responsibilities (All Levels) Produce engineering deliverables including calculations, reports, drawings, and documentation. Apply structural engineering principles and relevant standards, including Eurocodes and Building Regulations. Use design and analysis software such as 3D CAD tools, Tekla Structural Designer, and Tekla Tedds. Support compliance with technical governance, safety legislation (including CDM 2015), and quality processes. Communicate effectively within project teams and with stakeholders. Additional Responsibilities for Mid-Level / Senior Engineers Provide guidance and mentoring to junior engineers and technicians. Manage programme and quality performance across assigned schemes. Engage professionally with clients and stakeholders. Lead work packages or small project teams, ensuring technical accuracy. Additional Responsibilities for Lead Engineers Lead teams delivering multiple or complex structural projects. Provide high-level technical leadership, ensuring compliance with governance and quality frameworks. Coordinate with senior stakeholders to guide project strategy and risk management. Promote technical excellence and best practice across engineering functions. Qualifications & Experience Assistant-Level Requirements Typically 4+ years of building structures design experience. Ability to apply engineering theory under supervision. Working knowledge of design software and relevant codes. Progression toward Incorporated or Chartered status. Senior-Level Requirements Typically 10+ years of building structures experience. Ability to lead small teams and manage technical outputs. Extensive experience with 3D modelling and Tekla software. Incorporated or Chartered, or actively working towards it. Lead-Level Requirements Extensive experience including leadership of multi-disciplinary projects. Chartered status with a relevant engineering institution. Experience managing design governance and project performance. Strong stakeholder engagement and decision-making capabilities.
Field Service Technician CNC Waterjets National and International Travel Up to £45,000 per annum + Benefits Are you a Field Service Technician with experience working on Waterjet Cutting Machines or CNC Routers? If yes, read on My client is one of the world's leading manufacturers within their industry. They are a growing company that has manufactured, sold, installed, and supported close to 11,000 CNC machines. They are currently looking for a skilled Field Service Technician to join their team and provide service and support to the existing customer base. The Role - Field Service Technician: - Professional service and installation of Waterjet & CNC Router Machines. - Provide execution of warranty, repairs, maintenance, and installation of the products. - Training customers on Waterjet & CNC Router Machines. - Conduct on-site service calls. - From time to time provide customer telephone and online support. - Work with Factory Engineers on product development and system upgrades. Minimum Skills / Experience Required: - Experience servicing, installing or maintaining Water Jet Cutting Machines or CNC Routers- Electrical and Mechanical experience or valid qualification - Experience using CAD packages. - Ability to read schematics and fault find on Electrical equipment. - Valid driving license and passport - Experience delivering strong customer service The Package - Field Service Technician: - Starting salary up to £45,000 per annum - Overtime available - Company van + fuelcard - Home-based, hours door to door - Pension Scheme About Precision People Precision People is a leading recruitment agency that specializes in sourcing top talent for Engineering, Technical, Sales and Senior Management roles across a wide range of industries. With a focus on precision and quality, their team of expert recruiters works tirelessly to match the best candidates with the right employers, ensuring that both parties benefit from a successful partnership. Precision People has the expertise and resources to help you find the perfect role. With a deep understanding of the industry and a commitment to excellence, they have built a reputation for delivering exceptional results and exceeding their candidates expectations. Interested? To apply for the Field Service Technician position, here are your two options: "This is the job for me! When can I start?" - Call now and let's talk through your experience. Ask for Emma Gilmore on (phone number removed) between 7.30am - 4.30pm. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know. PPDEL
Mar 17, 2026
Full time
Field Service Technician CNC Waterjets National and International Travel Up to £45,000 per annum + Benefits Are you a Field Service Technician with experience working on Waterjet Cutting Machines or CNC Routers? If yes, read on My client is one of the world's leading manufacturers within their industry. They are a growing company that has manufactured, sold, installed, and supported close to 11,000 CNC machines. They are currently looking for a skilled Field Service Technician to join their team and provide service and support to the existing customer base. The Role - Field Service Technician: - Professional service and installation of Waterjet & CNC Router Machines. - Provide execution of warranty, repairs, maintenance, and installation of the products. - Training customers on Waterjet & CNC Router Machines. - Conduct on-site service calls. - From time to time provide customer telephone and online support. - Work with Factory Engineers on product development and system upgrades. Minimum Skills / Experience Required: - Experience servicing, installing or maintaining Water Jet Cutting Machines or CNC Routers- Electrical and Mechanical experience or valid qualification - Experience using CAD packages. - Ability to read schematics and fault find on Electrical equipment. - Valid driving license and passport - Experience delivering strong customer service The Package - Field Service Technician: - Starting salary up to £45,000 per annum - Overtime available - Company van + fuelcard - Home-based, hours door to door - Pension Scheme About Precision People Precision People is a leading recruitment agency that specializes in sourcing top talent for Engineering, Technical, Sales and Senior Management roles across a wide range of industries. With a focus on precision and quality, their team of expert recruiters works tirelessly to match the best candidates with the right employers, ensuring that both parties benefit from a successful partnership. Precision People has the expertise and resources to help you find the perfect role. With a deep understanding of the industry and a commitment to excellence, they have built a reputation for delivering exceptional results and exceeding their candidates expectations. Interested? To apply for the Field Service Technician position, here are your two options: "This is the job for me! When can I start?" - Call now and let's talk through your experience. Ask for Emma Gilmore on (phone number removed) between 7.30am - 4.30pm. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know. PPDEL
Electrical Design Engineer Control Panels, Special Purpose Machinery Cambourne £40k - £45k (dep on exp) + excellent benefits A brand-new opportunity has arisen for an Electrical Design Engineer to join a well-established engineering R&D and manufacturing company based near Cambourne. The company specialises in the development of innovative special purpose machinery This opportunity will be perfect for an Electrical Engineer / Electrical Design Technician with sound Electrical engineering knowledge with previous experience providing control panel layouts, schematic drawings with component and cables. You will also be able to use Electrical CAD package such as Eplan or AutoCAD Electrical. Why join? Work on industry-leading, high specification special purpose machinery and process equipment used worldwide. Genuine progression opportunities within engineering, project delivery, automation or leadership. A highly supportive and collaborative engineering team committed to continuous learning. Investment in your skillset through EPLAN, automation, and standards training. Exposure to complex machinery and multi discipline engineering challenges. If you re enthusiastic about electrical design and keen to grow into more advanced engineering responsibilities, this is your chance. Requirements of Project Engineer Recent and relevant practical electrical wiring experience. Previous electrical CAD experience (Eplan, AutoCAD Electrical, etc) Ideally qualified to HNC/HND standard or above preferably in an electrical engineering related subject. Experienced in reading and interpreting technical drawings and interpret data in written/numerical form on electrical systems. Knowledge of control panel design to international markets, such as US & Australia beneficial Qualified to BS7671 beneficial. Knowledge of PLC hardware and software such as, Mitsubishi, Allen Bradley & Siemens, Beckhoff beneficial Knowledge of Industrial networking systems such as Ethernet/IP, Modbus TCP, RS282, RS485, etc. beneficial. Sound like you? If so, please do not hesitate to get in contact with Adam Mayne at Vector Recruitment Ltd on (phone number removed) or (url removed)
Mar 17, 2026
Full time
Electrical Design Engineer Control Panels, Special Purpose Machinery Cambourne £40k - £45k (dep on exp) + excellent benefits A brand-new opportunity has arisen for an Electrical Design Engineer to join a well-established engineering R&D and manufacturing company based near Cambourne. The company specialises in the development of innovative special purpose machinery This opportunity will be perfect for an Electrical Engineer / Electrical Design Technician with sound Electrical engineering knowledge with previous experience providing control panel layouts, schematic drawings with component and cables. You will also be able to use Electrical CAD package such as Eplan or AutoCAD Electrical. Why join? Work on industry-leading, high specification special purpose machinery and process equipment used worldwide. Genuine progression opportunities within engineering, project delivery, automation or leadership. A highly supportive and collaborative engineering team committed to continuous learning. Investment in your skillset through EPLAN, automation, and standards training. Exposure to complex machinery and multi discipline engineering challenges. If you re enthusiastic about electrical design and keen to grow into more advanced engineering responsibilities, this is your chance. Requirements of Project Engineer Recent and relevant practical electrical wiring experience. Previous electrical CAD experience (Eplan, AutoCAD Electrical, etc) Ideally qualified to HNC/HND standard or above preferably in an electrical engineering related subject. Experienced in reading and interpreting technical drawings and interpret data in written/numerical form on electrical systems. Knowledge of control panel design to international markets, such as US & Australia beneficial Qualified to BS7671 beneficial. Knowledge of PLC hardware and software such as, Mitsubishi, Allen Bradley & Siemens, Beckhoff beneficial Knowledge of Industrial networking systems such as Ethernet/IP, Modbus TCP, RS282, RS485, etc. beneficial. Sound like you? If so, please do not hesitate to get in contact with Adam Mayne at Vector Recruitment Ltd on (phone number removed) or (url removed)
Premier Recruitment Group has the privilege to recruit on behalf of our very prestigious client based in Woolwich, South East London. We are recruiting for experienced and forward thinking Hardware Technician . This is full time, office based and permanent position and working for very well established company. Very interesting and varied role with a scope for progression. We are looking for a Hardware Technician (IoT Devices) to join growing support team and play a key role in maintaining and improving customer-facing technical systems. This role offers excellent progression opportunities as the company continues to scale, with the potential to develop into engineering, project management or operations leadership roles. This is a hands-on technical role supporting the configuration, testing and assembly of vehicle safety and telematics hardware. You will support customer orders and internal projects, ensuring equipment is prepared, tested and deployed reliably for fleet customers. Full training will be provided during the induction period. Hardware & Technical Work Uploading firmware, software and configuration files to devices prior to deployment. Configuring system settings including network connectivity, I/O sensors, data transmission protocols and camera inputs. Bench testing devices to ensure correct functionality and compliance with operational requirements. Preparing, labelling and checking equipment for deployment to field engineers or customers. Maintain records for configured devices, firmware versions and customer configuration profiles. Testing of faulty electronic devices, diagnosing hardware faults and following RMA procedures. Assembling wiring harnesses to customer specifications. Creating wiring diagrams and schematics. Collaborating with engineering and support teams to ensure device configuration meet customer specifications. Assist in improving device setup processes and documentation. Product & Engineering Support Supporting product development through hardware and software testing. Internal testing for software bugs and hardware faults. Supporting engineering activities on-site and off-site. Opportunity to assist with CAD work and hardware development. Operations & Support Liaising with support to resolve support tickets through Freshdesk. Updating databases and stock control systems. Assisting with planning and scheduling engineering resources. Supporting customer installations and asset recording. Skills and experience needed: An individual with warehousing and/or technical hardware experience would be ideal. Strong IT literacy and confidence using software systems and databases. Ability to manage tasks efficiently while meeting project or order deadlines. Experience within vehicle CCTV, telematics, electronics or related vehicle technology sectors would be advantageous but is not essential. A technical qualification or relevant hands-on experience. A full UK driver's licence would be preferred but not essential (preferably clean). If interested please apply directly or call Tom Kurczab at Premier Recruitment Group.
Mar 17, 2026
Full time
Premier Recruitment Group has the privilege to recruit on behalf of our very prestigious client based in Woolwich, South East London. We are recruiting for experienced and forward thinking Hardware Technician . This is full time, office based and permanent position and working for very well established company. Very interesting and varied role with a scope for progression. We are looking for a Hardware Technician (IoT Devices) to join growing support team and play a key role in maintaining and improving customer-facing technical systems. This role offers excellent progression opportunities as the company continues to scale, with the potential to develop into engineering, project management or operations leadership roles. This is a hands-on technical role supporting the configuration, testing and assembly of vehicle safety and telematics hardware. You will support customer orders and internal projects, ensuring equipment is prepared, tested and deployed reliably for fleet customers. Full training will be provided during the induction period. Hardware & Technical Work Uploading firmware, software and configuration files to devices prior to deployment. Configuring system settings including network connectivity, I/O sensors, data transmission protocols and camera inputs. Bench testing devices to ensure correct functionality and compliance with operational requirements. Preparing, labelling and checking equipment for deployment to field engineers or customers. Maintain records for configured devices, firmware versions and customer configuration profiles. Testing of faulty electronic devices, diagnosing hardware faults and following RMA procedures. Assembling wiring harnesses to customer specifications. Creating wiring diagrams and schematics. Collaborating with engineering and support teams to ensure device configuration meet customer specifications. Assist in improving device setup processes and documentation. Product & Engineering Support Supporting product development through hardware and software testing. Internal testing for software bugs and hardware faults. Supporting engineering activities on-site and off-site. Opportunity to assist with CAD work and hardware development. Operations & Support Liaising with support to resolve support tickets through Freshdesk. Updating databases and stock control systems. Assisting with planning and scheduling engineering resources. Supporting customer installations and asset recording. Skills and experience needed: An individual with warehousing and/or technical hardware experience would be ideal. Strong IT literacy and confidence using software systems and databases. Ability to manage tasks efficiently while meeting project or order deadlines. Experience within vehicle CCTV, telematics, electronics or related vehicle technology sectors would be advantageous but is not essential. A technical qualification or relevant hands-on experience. A full UK driver's licence would be preferred but not essential (preferably clean). If interested please apply directly or call Tom Kurczab at Premier Recruitment Group.
Coca-Cola Europacific Partners
East Kilbride, Lanarkshire
ASRS (Automated Storage Retrieval System) Technician 2 (Multiskilled) - Wakefield Permanent - Full time Shift Pattern: Continental Shift Pattern: 7 pm- 7am (3 Days on / 3 days off / 3 nights on / 3 nights off). (+ 23 Holidays) Starting Salary: £55, 182 Structured Career Development + Annual performance related pay bonus and pay reviews + Share scheme + Competitive pension contributions + Laundered uniform and all safety equipment provided + Range of flexible benefits and Corporate discounts + Free parking + Overtime available + Free hot and cold drinks and subsidised canteen + Excellent parental benefits + Flexible working. What you become part of: Wakefield Distribution Centre is a 24/7 operation, our Automated Storage and Retrieval System (ASRS) warehouse holds 28,000 pallets, alongside a racked and block-stacked conventional warehouse of 12,000 pallets. The combined typical annual throughput is over three million pallets. Every 24 hours we expect to receive around 5,000 pallets from the on-site manufacturing operation, as well as handling around 360 vehicle movements at peak. What to expect: As a Multi Skill engineer based in the CCEP largest GB warehouse, you will be responsible for the efficient operation of the automated storage retrieval systems, including: maintenance, repairs, and attending to breakdowns. You will work as one of four shift-based teams of three engineers, that collective provide 24/7 operational cover, overseen by the Distribution Reliability Manager. Your core responsibilities within the ASRS: Safety: Operate within the Company Health and Safety management system Collaboration with team of site and centrally base H&S representatives. Responsible for critical inspections and defect reporting. Ensure the safe maintenance and repair of both ASRS and individual equipment. Uphold a safe system of work, adhering to SOP's e.g lockout tagout procedures. As part of the role, you will be trained as a member of the site emergency team, this includes engaging in rescue work at height and duties of a first aider. Operation: You will be expected to oversee the execution of an advanced maintenance plan while ensuring that direct and indirect KBIs are met. Perform both preventative and corrective maintenance on both electrical and mechanical systems (20/80 elec/mech) to guarantee that the warehouse's various components continue to function as intended. You will complete a site based electrical competency assessment and area familiarization before commencing work. Make efficient use of our Central Maintenance Management System Collaborate with a network of local and external engineering teams. Promote operational excellence by sharing best practices Innovate and enhance current systems and procedures. Providing technical assistance for product/equipment adjustments. Skills & Prerequisites: Apprentice Served in Mechatronics (Will also consider Electrical Engineering Apprenticeship with quantifiable Mechanical Experience Or Mechanical Engineering Apprenticeship with quantifiable electrical experience and willing to undertake the Electrical qualification). Note: We will not consider a Level 3 electrotechnical Buildings & Structures apprenticeship on it's own OR Level 3 NVQ or above in Mechanical and/or Engineering, alongside an additional academic qualification (CITY&Guilds 3 or above / BTEC / HNC / HND / Degree). You will be expected to undertake both a Mechanical and Electrical skills assessment during interview to confirm skill base. Proven knowledge and experience working within both Mechanical and Electrical Engineering Ability to work at height - up to 100ft (vertical climb in restricted spaces) Experience in 3 phase electrical systems and mechanical drive systems. Previous record of Process Compliance and Fault-Finding experience on both Mechanical and Electrical equipment. Understanding of the in/output of programable logic controllers (PLC) Awareness of PUWER / LOLER / LOTO The closing date for applications is 18/03/26. We reserve the right to close this advertisement early if we receive a high volume of applications. To ensure you are considered for this role, we encourage you to apply as soon as possible. We are Coca-Cola Europacific Partners (CCEP) - a dedicated team of 42,000 people, serving customers in 31 countries, who work together to make, move and sell some of the world's most loved drinks. We are a global business and one of the leading consumer goods companies in the world. We help our 2.1 million customers grow, and we are constantly investing in exciting new products, innovative technologies and fresh ideas. This helps us to delight the 600 million people who enjoy our drinks every day. From gender, age and ethnicity to sexual orientation and different abilities, we welcome people from all walks of life and empower unique perspectives. We recognise we've got some way to go, but we'll get there with the support of our people. It's them who drive our future growth. To find out more about what it's like to work at and our culture we would welcome you to speak to one of our employees on our live chat platform, just click here to speak to an insider . We recognise some people prefer not to participate in alcohol related sales, interactions, or promotions. If that's true for you - please raise this with your talent acquisition contact who will advise you on whether this role includes activities related to our alcohol portfolio.
Mar 17, 2026
Full time
ASRS (Automated Storage Retrieval System) Technician 2 (Multiskilled) - Wakefield Permanent - Full time Shift Pattern: Continental Shift Pattern: 7 pm- 7am (3 Days on / 3 days off / 3 nights on / 3 nights off). (+ 23 Holidays) Starting Salary: £55, 182 Structured Career Development + Annual performance related pay bonus and pay reviews + Share scheme + Competitive pension contributions + Laundered uniform and all safety equipment provided + Range of flexible benefits and Corporate discounts + Free parking + Overtime available + Free hot and cold drinks and subsidised canteen + Excellent parental benefits + Flexible working. What you become part of: Wakefield Distribution Centre is a 24/7 operation, our Automated Storage and Retrieval System (ASRS) warehouse holds 28,000 pallets, alongside a racked and block-stacked conventional warehouse of 12,000 pallets. The combined typical annual throughput is over three million pallets. Every 24 hours we expect to receive around 5,000 pallets from the on-site manufacturing operation, as well as handling around 360 vehicle movements at peak. What to expect: As a Multi Skill engineer based in the CCEP largest GB warehouse, you will be responsible for the efficient operation of the automated storage retrieval systems, including: maintenance, repairs, and attending to breakdowns. You will work as one of four shift-based teams of three engineers, that collective provide 24/7 operational cover, overseen by the Distribution Reliability Manager. Your core responsibilities within the ASRS: Safety: Operate within the Company Health and Safety management system Collaboration with team of site and centrally base H&S representatives. Responsible for critical inspections and defect reporting. Ensure the safe maintenance and repair of both ASRS and individual equipment. Uphold a safe system of work, adhering to SOP's e.g lockout tagout procedures. As part of the role, you will be trained as a member of the site emergency team, this includes engaging in rescue work at height and duties of a first aider. Operation: You will be expected to oversee the execution of an advanced maintenance plan while ensuring that direct and indirect KBIs are met. Perform both preventative and corrective maintenance on both electrical and mechanical systems (20/80 elec/mech) to guarantee that the warehouse's various components continue to function as intended. You will complete a site based electrical competency assessment and area familiarization before commencing work. Make efficient use of our Central Maintenance Management System Collaborate with a network of local and external engineering teams. Promote operational excellence by sharing best practices Innovate and enhance current systems and procedures. Providing technical assistance for product/equipment adjustments. Skills & Prerequisites: Apprentice Served in Mechatronics (Will also consider Electrical Engineering Apprenticeship with quantifiable Mechanical Experience Or Mechanical Engineering Apprenticeship with quantifiable electrical experience and willing to undertake the Electrical qualification). Note: We will not consider a Level 3 electrotechnical Buildings & Structures apprenticeship on it's own OR Level 3 NVQ or above in Mechanical and/or Engineering, alongside an additional academic qualification (CITY&Guilds 3 or above / BTEC / HNC / HND / Degree). You will be expected to undertake both a Mechanical and Electrical skills assessment during interview to confirm skill base. Proven knowledge and experience working within both Mechanical and Electrical Engineering Ability to work at height - up to 100ft (vertical climb in restricted spaces) Experience in 3 phase electrical systems and mechanical drive systems. Previous record of Process Compliance and Fault-Finding experience on both Mechanical and Electrical equipment. Understanding of the in/output of programable logic controllers (PLC) Awareness of PUWER / LOLER / LOTO The closing date for applications is 18/03/26. We reserve the right to close this advertisement early if we receive a high volume of applications. To ensure you are considered for this role, we encourage you to apply as soon as possible. We are Coca-Cola Europacific Partners (CCEP) - a dedicated team of 42,000 people, serving customers in 31 countries, who work together to make, move and sell some of the world's most loved drinks. We are a global business and one of the leading consumer goods companies in the world. We help our 2.1 million customers grow, and we are constantly investing in exciting new products, innovative technologies and fresh ideas. This helps us to delight the 600 million people who enjoy our drinks every day. From gender, age and ethnicity to sexual orientation and different abilities, we welcome people from all walks of life and empower unique perspectives. We recognise we've got some way to go, but we'll get there with the support of our people. It's them who drive our future growth. To find out more about what it's like to work at and our culture we would welcome you to speak to one of our employees on our live chat platform, just click here to speak to an insider . We recognise some people prefer not to participate in alcohol related sales, interactions, or promotions. If that's true for you - please raise this with your talent acquisition contact who will advise you on whether this role includes activities related to our alcohol portfolio.
Technical Manager Sudbury, Suffolk 6 Month FTC Contact: Joseph Huggins Apply Now! SOS are currently looking for Technical Manager / Lead Engineer within the Disinfection Division for a Utilities company based in Sudbury, Suffolk. This is a fantastic opportunity to lead technical systems and projects, with the possibility of hybrid working. Start date: ASAP. Duration : 6 months fixed-term contract. Oversee the smooth functioning of technical systems, processes and projects aligned with business objectives. Support development, manufacturing, and assembly of water disinfection products, including UVC reactors and UVA inspection lights. Ensure compliance with relevant laws, regulations and industry standards; produce technical documentation and provide support across teams. Minimum 3 years' experience as a technician, engineer or designer within the water treatment or disinfection industry. Excellent knowledge of UVC water disinfection, flow rates, UV dosage calculations, and relevant industry standards and regulations. Proficiency in CAD (SolidWorks, DraftSight or AutoCAD), PCB design, PLC software programming, and electronics troubleshooting. Salary: £40-£50k DOE Hours: 40 hours per week, primarily office based. Hybrid working is an option with a minimum requirement of three days per week office based working hands on Interested? Please apply by sending your CV or contacting Joe Huggins in our recruitment team to discuss this exciting opportunity .
Mar 17, 2026
Full time
Technical Manager Sudbury, Suffolk 6 Month FTC Contact: Joseph Huggins Apply Now! SOS are currently looking for Technical Manager / Lead Engineer within the Disinfection Division for a Utilities company based in Sudbury, Suffolk. This is a fantastic opportunity to lead technical systems and projects, with the possibility of hybrid working. Start date: ASAP. Duration : 6 months fixed-term contract. Oversee the smooth functioning of technical systems, processes and projects aligned with business objectives. Support development, manufacturing, and assembly of water disinfection products, including UVC reactors and UVA inspection lights. Ensure compliance with relevant laws, regulations and industry standards; produce technical documentation and provide support across teams. Minimum 3 years' experience as a technician, engineer or designer within the water treatment or disinfection industry. Excellent knowledge of UVC water disinfection, flow rates, UV dosage calculations, and relevant industry standards and regulations. Proficiency in CAD (SolidWorks, DraftSight or AutoCAD), PCB design, PLC software programming, and electronics troubleshooting. Salary: £40-£50k DOE Hours: 40 hours per week, primarily office based. Hybrid working is an option with a minimum requirement of three days per week office based working hands on Interested? Please apply by sending your CV or contacting Joe Huggins in our recruitment team to discuss this exciting opportunity .
Are you a Senior Design Engineer, eager to work on market leading equipment? Based in Wrexham, we're a global manufacturer and you'll be designing our production line equipment and be involved in the production phase of the project. We are a recognised brand who are constantly evolving in a progressive market. BASIC SALARY: £50,000 - £60,000 BENEFITS: 20 non working fridays (on top of holiday allowance) Enhanced employer pension contributions Reduced gym memberships Health cash back scheme Employee assistance programme LOCATION: You'll be working from our factory based in Wrexham. COMMUTABLE LOCATIONS: Wrexham, Chester, Deeside, Oswestry, Ellesmere, Whitchurch, Crewe, Shrewsbury, Mold, Rhyl, Market Drayton, Nantwich, Runcorn, Liverpool JOB DESCRIPTION: Design Engineer, Mechanical Design Engineer - CAD, Print, Automation As our Design Engineer, you'll be involved in designing our market leading line equipment and fixtures in our UK and International facilities. You'll be involved from the design stage, right through to the build and implementation stages, so you can see your designs come to life. You'll be using SOLIDWORKS to develop designs. You'll also maintain detailed documents of designs, modifications and project progress. In this role you'll be: Testing and validating your designs to ensure sound performance Involved in the build stage of the process, keeping your hands-on skills well polished Providing support for modifications and design changes at build and commissioning stage PERSON SPECIFICATION: Design Engineer, Mechanical Design Engineer - CAD, Print, Automation Ideally, you'll have completed your degree or equivalent in Mechanical Engineering or similar and have an interest in mechanical assembly design. You'll have experience working on 3D CAD, ideally with SOLIDWORKS, designing machinery with the likes of pneumatics and motors. You'll be hands on during the build phase. As our Design Engineer you will: Be a proactive problem solver Work well under pressure to achieve tight deadlines Want to work on cutting edge technologies and progress in your career with us THE COMPANY: We manufacture top of the range products from office printers, to industrial machining centres. We have won awards for our carbon neutral recycling facilities in Europe. We invest in our staff and promote growth within our business. PROSPECTS: As an international business, we offer the opportunity to work across the globe and support progression within the company. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Mechanical Engineer, Mechanical Design Engineer, Design Engineer, CAD Technician, CAD Draughtsperson - Automation, Factory Automation, Electronics, Electrical Equipment, Printers, Scanners INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MT18412, Wallace Hind Selection
Mar 17, 2026
Full time
Are you a Senior Design Engineer, eager to work on market leading equipment? Based in Wrexham, we're a global manufacturer and you'll be designing our production line equipment and be involved in the production phase of the project. We are a recognised brand who are constantly evolving in a progressive market. BASIC SALARY: £50,000 - £60,000 BENEFITS: 20 non working fridays (on top of holiday allowance) Enhanced employer pension contributions Reduced gym memberships Health cash back scheme Employee assistance programme LOCATION: You'll be working from our factory based in Wrexham. COMMUTABLE LOCATIONS: Wrexham, Chester, Deeside, Oswestry, Ellesmere, Whitchurch, Crewe, Shrewsbury, Mold, Rhyl, Market Drayton, Nantwich, Runcorn, Liverpool JOB DESCRIPTION: Design Engineer, Mechanical Design Engineer - CAD, Print, Automation As our Design Engineer, you'll be involved in designing our market leading line equipment and fixtures in our UK and International facilities. You'll be involved from the design stage, right through to the build and implementation stages, so you can see your designs come to life. You'll be using SOLIDWORKS to develop designs. You'll also maintain detailed documents of designs, modifications and project progress. In this role you'll be: Testing and validating your designs to ensure sound performance Involved in the build stage of the process, keeping your hands-on skills well polished Providing support for modifications and design changes at build and commissioning stage PERSON SPECIFICATION: Design Engineer, Mechanical Design Engineer - CAD, Print, Automation Ideally, you'll have completed your degree or equivalent in Mechanical Engineering or similar and have an interest in mechanical assembly design. You'll have experience working on 3D CAD, ideally with SOLIDWORKS, designing machinery with the likes of pneumatics and motors. You'll be hands on during the build phase. As our Design Engineer you will: Be a proactive problem solver Work well under pressure to achieve tight deadlines Want to work on cutting edge technologies and progress in your career with us THE COMPANY: We manufacture top of the range products from office printers, to industrial machining centres. We have won awards for our carbon neutral recycling facilities in Europe. We invest in our staff and promote growth within our business. PROSPECTS: As an international business, we offer the opportunity to work across the globe and support progression within the company. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Mechanical Engineer, Mechanical Design Engineer, Design Engineer, CAD Technician, CAD Draughtsperson - Automation, Factory Automation, Electronics, Electrical Equipment, Printers, Scanners INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MT18412, Wallace Hind Selection
Design Manager - Water Industry Location: Manchester (Hybrid working) Contract: 12 month contract Rate: 355 to 445 per day (outside IR35) An established engineering and construction design specialist is seeking an experienced Design Manager to support the delivery of projects across regulated clean and wastewater projects in the UK. This is a contract opportunity suited to candidates with strong technical capability, leadership experience, and a background in the water sector. The Projects you'll be working on Varied projects across the UK water industry, including: Designs of UMON 3 and 4 upgrades at sewage treatment works nationwide Designs of clean water main replacements nationwide Key Responsibilities Manage, direct and develop engineers, CAD technicians and graduates. Grow the design team and maintain a positive ethos and attitude within the team. Lead the design process on multidisciplinary water industry projects. Challenge, improve and shape formal processes and procedures for design team and ensure work is undertaken using them. Identify and implement appropriate software packages, and drive the use of BIM and 3D modelling where necessary. Ensure team produce design deliverables that satisfy safety and quality requirements and are fully integrated. Required Qualifications & Experience 10 years' experience working in the engineering design industry in a regulated sector such as: Rail, Water, Oil & Gas, Nuclear, Highways, Bridges. Graduate, HND or significant experience from Technician level Good level of IT skills Preferred Qualifications & Experience Experience in regulated water industry. Track record managing multidisciplinary design teams and projects Knowledge of Engineering Drawing Practices Experience building junior teams and capability of junior staff Chartered engineer or working towards chartership. How to Apply If you have extensive experience working in Water Industry as a Design Manager and are looking for your next contract role, please apply or get in touch for a confidential discussion
Mar 17, 2026
Contractor
Design Manager - Water Industry Location: Manchester (Hybrid working) Contract: 12 month contract Rate: 355 to 445 per day (outside IR35) An established engineering and construction design specialist is seeking an experienced Design Manager to support the delivery of projects across regulated clean and wastewater projects in the UK. This is a contract opportunity suited to candidates with strong technical capability, leadership experience, and a background in the water sector. The Projects you'll be working on Varied projects across the UK water industry, including: Designs of UMON 3 and 4 upgrades at sewage treatment works nationwide Designs of clean water main replacements nationwide Key Responsibilities Manage, direct and develop engineers, CAD technicians and graduates. Grow the design team and maintain a positive ethos and attitude within the team. Lead the design process on multidisciplinary water industry projects. Challenge, improve and shape formal processes and procedures for design team and ensure work is undertaken using them. Identify and implement appropriate software packages, and drive the use of BIM and 3D modelling where necessary. Ensure team produce design deliverables that satisfy safety and quality requirements and are fully integrated. Required Qualifications & Experience 10 years' experience working in the engineering design industry in a regulated sector such as: Rail, Water, Oil & Gas, Nuclear, Highways, Bridges. Graduate, HND or significant experience from Technician level Good level of IT skills Preferred Qualifications & Experience Experience in regulated water industry. Track record managing multidisciplinary design teams and projects Knowledge of Engineering Drawing Practices Experience building junior teams and capability of junior staff Chartered engineer or working towards chartership. How to Apply If you have extensive experience working in Water Industry as a Design Manager and are looking for your next contract role, please apply or get in touch for a confidential discussion
Associate Director - Development Infrastructure About the Role: We are looking for an experienced Associate Director to lead and oversee the design and delivery of development infrastructure projects, with a primary focus on roads, drainage, and utilities for residential and mixed-use developments. This is a senior leadership position responsible for managing both internal and external teams to ensure the efficient, cost-effective, and compliant delivery of civil engineering solutions. Key Responsibilities: Lead and manage the design and delivery of civil engineering infrastructure (S38, S104, S278, S106) for housing, commercial, or mixed-use development projects. Focus on business development and fee generation including tendering, bidding and winning projects. Manage and mentor a team of civil engineers, technicians, and external consultants. Ensure all infrastructure works comply with relevant design standards (DMRB, Sewers for Adoption, Building Regulations, SuDS guidance, etc.). Review, approve, and provide technical oversight on detailed designs for roads, drainage, earthworks, and utility systems. Manage project budgets, schedules, and resources effectively, ensuring successful delivery of multiple projects. Coordinate and liaise with planning, architecture, construction, and legal teams to align infrastructure delivery with overall project goals. Maintain relationships with adopting authorities and ensure successful technical approvals and agreements. Oversee the integration of sustainable drainage design (SuDS) and ensure compliance with current environmental and planning policies. Provide expert advice and strategic direction on complex technical issues and drive the development of best practices within the team. Required Experience & Qualifications: Degree in Civil Engineering or a related discipline. Experience in civil infrastructure design and delivery, particularly in residential/mixed-use development. Strong understanding of UK highways and drainage legislation, including S38, S104, S278, and S106 processes. Proven leadership experience managing multidisciplinary teams and collaborating with external consultants. Strong project management, communication, and client-facing skills. Experience with design software such as AutoCAD, Civil 3D, MicroDrainage/Flow. Desirable: Experience in land feasibility and early-stage design assessments. Knowledge of land development, earthworks, and remediation strategies. If you feel that you are right for this role technically, but the salary, location or seniority does not suit you specifically then please still feel free to send us your CV. We constantly recruit for roles very similar to this one at all levels UK Wide. We are always keen to chat with you discreetly about your employment situation. Even if you are happy in your current role for now, we always welcome calls from Highways, Infrastructure & Transportation professionals keen to make their introductions for future months or years. Carrington West's Highways, Transport & Infrastructure division is the fastest growing in the country, our specialist team has a combined over 100+ years' experience in this market. Please call Adam Butler at Carrington West on (phone number removed) for more information. By applying for this position, you are agreeing for Carrington West to hold and process your personal data in accordance with our Data Protection Policy. Your data will be shared with third party clients specifically relevant to any roles you have applied for. If at any stage, you wish to withdraw your consent please contact us.
Mar 17, 2026
Full time
Associate Director - Development Infrastructure About the Role: We are looking for an experienced Associate Director to lead and oversee the design and delivery of development infrastructure projects, with a primary focus on roads, drainage, and utilities for residential and mixed-use developments. This is a senior leadership position responsible for managing both internal and external teams to ensure the efficient, cost-effective, and compliant delivery of civil engineering solutions. Key Responsibilities: Lead and manage the design and delivery of civil engineering infrastructure (S38, S104, S278, S106) for housing, commercial, or mixed-use development projects. Focus on business development and fee generation including tendering, bidding and winning projects. Manage and mentor a team of civil engineers, technicians, and external consultants. Ensure all infrastructure works comply with relevant design standards (DMRB, Sewers for Adoption, Building Regulations, SuDS guidance, etc.). Review, approve, and provide technical oversight on detailed designs for roads, drainage, earthworks, and utility systems. Manage project budgets, schedules, and resources effectively, ensuring successful delivery of multiple projects. Coordinate and liaise with planning, architecture, construction, and legal teams to align infrastructure delivery with overall project goals. Maintain relationships with adopting authorities and ensure successful technical approvals and agreements. Oversee the integration of sustainable drainage design (SuDS) and ensure compliance with current environmental and planning policies. Provide expert advice and strategic direction on complex technical issues and drive the development of best practices within the team. Required Experience & Qualifications: Degree in Civil Engineering or a related discipline. Experience in civil infrastructure design and delivery, particularly in residential/mixed-use development. Strong understanding of UK highways and drainage legislation, including S38, S104, S278, and S106 processes. Proven leadership experience managing multidisciplinary teams and collaborating with external consultants. Strong project management, communication, and client-facing skills. Experience with design software such as AutoCAD, Civil 3D, MicroDrainage/Flow. Desirable: Experience in land feasibility and early-stage design assessments. Knowledge of land development, earthworks, and remediation strategies. If you feel that you are right for this role technically, but the salary, location or seniority does not suit you specifically then please still feel free to send us your CV. We constantly recruit for roles very similar to this one at all levels UK Wide. We are always keen to chat with you discreetly about your employment situation. Even if you are happy in your current role for now, we always welcome calls from Highways, Infrastructure & Transportation professionals keen to make their introductions for future months or years. Carrington West's Highways, Transport & Infrastructure division is the fastest growing in the country, our specialist team has a combined over 100+ years' experience in this market. Please call Adam Butler at Carrington West on (phone number removed) for more information. By applying for this position, you are agreeing for Carrington West to hold and process your personal data in accordance with our Data Protection Policy. Your data will be shared with third party clients specifically relevant to any roles you have applied for. If at any stage, you wish to withdraw your consent please contact us.
Are you a Senior Design Engineer, eager to work on market leading equipment? Based in Wrexham, we're a global manufacturer and you'll be designing our production line equipment and be involved in the production phase of the project. We are a recognised brand who are constantly evolving in a progressive market. BASIC SALARY: £50,000 - £60,000 BENEFITS: 20 non working fridays (on top of holiday allowance) Enhanced employer pension contributions Reduced gym memberships Health cash back scheme Employee assistance programme LOCATION: You'll be working from our factory based in Wrexham. COMMUTABLE LOCATIONS: Wrexham, Chester, Deeside, Oswestry, Ellesmere, Whitchurch, Crewe, Shrewsbury, Mold, Rhyl, Market Drayton, Nantwich, Runcorn, Liverpool JOB DESCRIPTION: Design Engineer, Mechanical Design Engineer - CAD, Print, Automation As our Design Engineer, you'll be involved in designing our market leading line equipment and fixtures in our UK and International facilities. You'll be involved from the design stage, right through to the build and implementation stages, so you can see your designs come to life. You'll be using SOLIDWORKS to develop designs. You'll also maintain detailed documents of designs, modifications and project progress. In this role you'll be: Testing and validating your designs to ensure sound performance Involved in the build stage of the process, keeping your hands-on skills well polished Providing support for modifications and design changes at build and commissioning stage PERSON SPECIFICATION: Design Engineer, Mechanical Design Engineer - CAD, Print, Automation Ideally, you'll have completed your degree or equivalent in Mechanical Engineering or similar and have an interest in mechanical assembly design. You'll have experience working on 3D CAD, ideally with SOLIDWORKS, designing machinery with the likes of pneumatics and motors. You'll be hands on during the build phase. As our Design Engineer you will: Be a proactive problem solver Work well under pressure to achieve tight deadlines Want to work on cutting edge technologies and progress in your career with us THE COMPANY: We manufacture top of the range products from office printers, to industrial machining centres. We have won awards for our carbon neutral recycling facilities in Europe. We invest in our staff and promote growth within our business. PROSPECTS: As an international business, we offer the opportunity to work across the globe and support progression within the company. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Mechanical Engineer, Mechanical Design Engineer, Design Engineer, CAD Technician, CAD Draughtsperson - Automation, Factory Automation, Electronics, Electrical Equipment, Printers, Scanners INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MT18412, Wallace Hind Selection
Mar 17, 2026
Full time
Are you a Senior Design Engineer, eager to work on market leading equipment? Based in Wrexham, we're a global manufacturer and you'll be designing our production line equipment and be involved in the production phase of the project. We are a recognised brand who are constantly evolving in a progressive market. BASIC SALARY: £50,000 - £60,000 BENEFITS: 20 non working fridays (on top of holiday allowance) Enhanced employer pension contributions Reduced gym memberships Health cash back scheme Employee assistance programme LOCATION: You'll be working from our factory based in Wrexham. COMMUTABLE LOCATIONS: Wrexham, Chester, Deeside, Oswestry, Ellesmere, Whitchurch, Crewe, Shrewsbury, Mold, Rhyl, Market Drayton, Nantwich, Runcorn, Liverpool JOB DESCRIPTION: Design Engineer, Mechanical Design Engineer - CAD, Print, Automation As our Design Engineer, you'll be involved in designing our market leading line equipment and fixtures in our UK and International facilities. You'll be involved from the design stage, right through to the build and implementation stages, so you can see your designs come to life. You'll be using SOLIDWORKS to develop designs. You'll also maintain detailed documents of designs, modifications and project progress. In this role you'll be: Testing and validating your designs to ensure sound performance Involved in the build stage of the process, keeping your hands-on skills well polished Providing support for modifications and design changes at build and commissioning stage PERSON SPECIFICATION: Design Engineer, Mechanical Design Engineer - CAD, Print, Automation Ideally, you'll have completed your degree or equivalent in Mechanical Engineering or similar and have an interest in mechanical assembly design. You'll have experience working on 3D CAD, ideally with SOLIDWORKS, designing machinery with the likes of pneumatics and motors. You'll be hands on during the build phase. As our Design Engineer you will: Be a proactive problem solver Work well under pressure to achieve tight deadlines Want to work on cutting edge technologies and progress in your career with us THE COMPANY: We manufacture top of the range products from office printers, to industrial machining centres. We have won awards for our carbon neutral recycling facilities in Europe. We invest in our staff and promote growth within our business. PROSPECTS: As an international business, we offer the opportunity to work across the globe and support progression within the company. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Mechanical Engineer, Mechanical Design Engineer, Design Engineer, CAD Technician, CAD Draughtsperson - Automation, Factory Automation, Electronics, Electrical Equipment, Printers, Scanners INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MT18412, Wallace Hind Selection
Position: Architectural Technologist Location: Wakefield Salary: £35,000 - £45,000 + PackageOur client, a growing regional residential developer, are seeking an Architectural Technologist to join their expanding team. This is a key hire that will take ownership of all in-house technical drawing production, supporting a strong, cash-backed development pipeline. Operating as a family-run business, they offer a stable environment, direct access to senior management and the opportunity to shape architectural standards as the business grows. With several new sites launching and unit output set to increase year-on-year, this is an excellent opportunity for a technically strong technician who enjoys hands-on drawing work and wants long-term progression. The successful Architectural Technologist will primarily be working across RIBA Stages 4/5. Architectural Technologist Salary & Benefits £35,000 - £45,000 DOE 33 days holiday (including bank holidays) Pension Private medical Monthly company outings Fully funded Christmas party Supportive, family-run culture Strong long-term development pipeline across Yorkshire Architectural Technologist Job Overview Producing detailed technical drawings, layouts and house type designs Preparing and maintaining accurate AutoCAD-based drawing standards Supporting planning, technical and site delivery teams with required documentation Producing technical site layouts, construction detailing and working drawings Completing drawing amendments, updates and releases to programme Liaising with internal departments and supporting occasional site visits Maintaining high accuracy, consistency and compliance with applicable regulations Contributing to future development of drawing standards and house type portfolios Architectural Technologist Job Requirements Experience within the Residential sector (volume housebuilding preferred) Good knowldge of either Revit or AutoCAD Ability to work independently on projects, as well as part of a small technical team Excellent technical knowledge and attention to detail Confident producing house types, layouts, working drawings and detailing Full UK driving licence (site visits required) Comfortable with fully office-based working (Mon-Fri, 8:30am-5:00pm) Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Mar 17, 2026
Full time
Position: Architectural Technologist Location: Wakefield Salary: £35,000 - £45,000 + PackageOur client, a growing regional residential developer, are seeking an Architectural Technologist to join their expanding team. This is a key hire that will take ownership of all in-house technical drawing production, supporting a strong, cash-backed development pipeline. Operating as a family-run business, they offer a stable environment, direct access to senior management and the opportunity to shape architectural standards as the business grows. With several new sites launching and unit output set to increase year-on-year, this is an excellent opportunity for a technically strong technician who enjoys hands-on drawing work and wants long-term progression. The successful Architectural Technologist will primarily be working across RIBA Stages 4/5. Architectural Technologist Salary & Benefits £35,000 - £45,000 DOE 33 days holiday (including bank holidays) Pension Private medical Monthly company outings Fully funded Christmas party Supportive, family-run culture Strong long-term development pipeline across Yorkshire Architectural Technologist Job Overview Producing detailed technical drawings, layouts and house type designs Preparing and maintaining accurate AutoCAD-based drawing standards Supporting planning, technical and site delivery teams with required documentation Producing technical site layouts, construction detailing and working drawings Completing drawing amendments, updates and releases to programme Liaising with internal departments and supporting occasional site visits Maintaining high accuracy, consistency and compliance with applicable regulations Contributing to future development of drawing standards and house type portfolios Architectural Technologist Job Requirements Experience within the Residential sector (volume housebuilding preferred) Good knowldge of either Revit or AutoCAD Ability to work independently on projects, as well as part of a small technical team Excellent technical knowledge and attention to detail Confident producing house types, layouts, working drawings and detailing Full UK driving licence (site visits required) Comfortable with fully office-based working (Mon-Fri, 8:30am-5:00pm) Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Job Title: Structural Revit Technician Area: Thetford Shift Pattern: Monday to Friday (Days) plus generous Car Allowance Permanent Salary: Excellent As a Structural Revit Technician, you will join a team involved with projects at all stages. A true multidisciplinary contractor design team working on a variety of building and civil engineering projects. You will provide Structural modelling and technical detailing as part of Structural and Civil Engineering designers, working alongside our Architectural designers to deliver fully integrated design solutions. Responsibilities Production of design output using BIM software, eg REVIT, following industry BIM standards, protocols and procedures to deliver output compliant with BIM Level 2 standard and beyond as defined by ISO19650. Production of working drawings, reports and specifications ensuring the compliance with National/International Standards, statutory requirements, and the project brief. Support in the development of drawing/ BIM standards and QA procedures associated with BIM. Translate standard/proprietary manufacturer s details onto working drawings and models. Attend site to verify compliance of site works with the design, eg reinforcement, foundations etc. Contribute to fee calculations through the accurate evaluation of detailing/modelling resource required on the project. Skills & Knowledge Building Regulations Structural Steelwork Modelling / Detailing Reinforced Concrete Modelling / Detailing Computer Aided Design Software (AutoCAD, REVIT) Requirements of ISO19650 and other standards relating to BIM and digital design Experience Minimum 5 years experience in the UK working across a wide range of construction sectors. HNC in Civil Engineering or equivalent. Support for further training and development will be provided and encouraged, including EngTech. I you are interested and want to hear more information, contact David Steel On (phone number removed)
Mar 17, 2026
Full time
Job Title: Structural Revit Technician Area: Thetford Shift Pattern: Monday to Friday (Days) plus generous Car Allowance Permanent Salary: Excellent As a Structural Revit Technician, you will join a team involved with projects at all stages. A true multidisciplinary contractor design team working on a variety of building and civil engineering projects. You will provide Structural modelling and technical detailing as part of Structural and Civil Engineering designers, working alongside our Architectural designers to deliver fully integrated design solutions. Responsibilities Production of design output using BIM software, eg REVIT, following industry BIM standards, protocols and procedures to deliver output compliant with BIM Level 2 standard and beyond as defined by ISO19650. Production of working drawings, reports and specifications ensuring the compliance with National/International Standards, statutory requirements, and the project brief. Support in the development of drawing/ BIM standards and QA procedures associated with BIM. Translate standard/proprietary manufacturer s details onto working drawings and models. Attend site to verify compliance of site works with the design, eg reinforcement, foundations etc. Contribute to fee calculations through the accurate evaluation of detailing/modelling resource required on the project. Skills & Knowledge Building Regulations Structural Steelwork Modelling / Detailing Reinforced Concrete Modelling / Detailing Computer Aided Design Software (AutoCAD, REVIT) Requirements of ISO19650 and other standards relating to BIM and digital design Experience Minimum 5 years experience in the UK working across a wide range of construction sectors. HNC in Civil Engineering or equivalent. Support for further training and development will be provided and encouraged, including EngTech. I you are interested and want to hear more information, contact David Steel On (phone number removed)
Do you have a passion for live events and technical production? Guildford School of Acting (GSA) is seeking an experienced Events Technician to join our Technical Team within the Operations and Events Department. The Role In this hands-on role, you will support the planning and delivery of a wide range of events across GSA and the wider University. Working closely with academic staff, professional services colleagues, visiting artists, and students, you will help deliver high-quality technical solutions that support learning, performance, and public engagement. You will play a key role in delivering technical support for: School and University events, both on campus and at external venues Open days, auditions, and recruitment events Conferences, lectures, and symposia Public performances, showcases, and special events Research events and student society activities The Technical Team provides equipment support, mentoring, maintenance, and expert guidance across all activity areas. Delivering an exceptional student, staff, and visitor experience is central to everything we do. Working hours: Typically 9am-5pm, however the role requires flexibility, with hours subject to change to meet event schedules, including occasional evenings and weekends. About You You will bring professional experience providing technical support for live events, conferences, or performances, ideally within a higher-education, arts, or cultural environment. We are looking for someone who has: Strong practical knowledge of live event production, including sound, lighting, and basic AV systems Experience setting up, operating, and striking technical equipment for a variety of event types Excellent organisational, administrative, and interpersonal skills The ability to work collaboratively with staff, students, and external stakeholders Confidence supporting multiple events simultaneously and managing changing priorities Experience maintaining technical equipment and contributing to safe working practices A proactive, solution-focused approach with a strong commitment to customer service Up-to-date knowledge of Health & Safety regulations and a commitment to safe, inclusive working practices Experience working in a performance or conservatoire setting, and familiarity with university events and protocols, would be advantageous. Why GSA? The University of Surrey is a global community of ideas and people, dedicated to life-changing education and research. We are ambitious and have a bold vision of what we want to achieve - shaping ourselves into one of the best universities in the world, which we are achieving through the talents and endeavour of every employee. Our culture empowers people to achieve this aim and to collectively, and individually, make a real difference. As part of the University of Surrey, GSA is one of the UK's leading drama schools, offering an inspiring and collaborative working environment. In this role, your skills and passion will directly contribute to shaping the future of theatre, performance, and production. In addition to salary, you will receive a yearly incremental pay rise, generous annual leave entitlement and pension, access to world-class leisure facilities on campus, a range of travel schemes, and supportive family friendly benefits including an excellent on-site nursery. We encourage continued professional practice through external work where possible and we have opportunities to work with both future professionals and established industry practitioners on GSA Productions. Further Information To apply, please upload a CV and covering letter to the University website. You will also be asked some brief questions to help us understand your suitability for the role. For an informal discussion about this post, please contact Sarah Sage, Theatre Technical Manager at Interviews will be held on campus Tuesday 31 March 2026 We are actively committed to looking for all kinds of talent to build a diverse staff team at the GSA. We understand creating and maintaining a work environment in which all social groups are represented and moreover, feel safe and respected, is something we must work at. We do not take this for granted. We see anti-racism and anti-discrimination more broadly as a life-long commitment. We are working towards removing all barriers that staff, applicants and students may experience. Steps taken include having gender-balanced and racially diverse panels, undertaking anti-racism training and unconscious bias training and considering all candidates against a clear, realistic and well-defined person specification. We would particularly encourage applications from under-represented groups, such as people from the Global majority, people with disabilities and those identifying as female, non-binary or trans. Further details Job Description
Mar 17, 2026
Full time
Do you have a passion for live events and technical production? Guildford School of Acting (GSA) is seeking an experienced Events Technician to join our Technical Team within the Operations and Events Department. The Role In this hands-on role, you will support the planning and delivery of a wide range of events across GSA and the wider University. Working closely with academic staff, professional services colleagues, visiting artists, and students, you will help deliver high-quality technical solutions that support learning, performance, and public engagement. You will play a key role in delivering technical support for: School and University events, both on campus and at external venues Open days, auditions, and recruitment events Conferences, lectures, and symposia Public performances, showcases, and special events Research events and student society activities The Technical Team provides equipment support, mentoring, maintenance, and expert guidance across all activity areas. Delivering an exceptional student, staff, and visitor experience is central to everything we do. Working hours: Typically 9am-5pm, however the role requires flexibility, with hours subject to change to meet event schedules, including occasional evenings and weekends. About You You will bring professional experience providing technical support for live events, conferences, or performances, ideally within a higher-education, arts, or cultural environment. We are looking for someone who has: Strong practical knowledge of live event production, including sound, lighting, and basic AV systems Experience setting up, operating, and striking technical equipment for a variety of event types Excellent organisational, administrative, and interpersonal skills The ability to work collaboratively with staff, students, and external stakeholders Confidence supporting multiple events simultaneously and managing changing priorities Experience maintaining technical equipment and contributing to safe working practices A proactive, solution-focused approach with a strong commitment to customer service Up-to-date knowledge of Health & Safety regulations and a commitment to safe, inclusive working practices Experience working in a performance or conservatoire setting, and familiarity with university events and protocols, would be advantageous. Why GSA? The University of Surrey is a global community of ideas and people, dedicated to life-changing education and research. We are ambitious and have a bold vision of what we want to achieve - shaping ourselves into one of the best universities in the world, which we are achieving through the talents and endeavour of every employee. Our culture empowers people to achieve this aim and to collectively, and individually, make a real difference. As part of the University of Surrey, GSA is one of the UK's leading drama schools, offering an inspiring and collaborative working environment. In this role, your skills and passion will directly contribute to shaping the future of theatre, performance, and production. In addition to salary, you will receive a yearly incremental pay rise, generous annual leave entitlement and pension, access to world-class leisure facilities on campus, a range of travel schemes, and supportive family friendly benefits including an excellent on-site nursery. We encourage continued professional practice through external work where possible and we have opportunities to work with both future professionals and established industry practitioners on GSA Productions. Further Information To apply, please upload a CV and covering letter to the University website. You will also be asked some brief questions to help us understand your suitability for the role. For an informal discussion about this post, please contact Sarah Sage, Theatre Technical Manager at Interviews will be held on campus Tuesday 31 March 2026 We are actively committed to looking for all kinds of talent to build a diverse staff team at the GSA. We understand creating and maintaining a work environment in which all social groups are represented and moreover, feel safe and respected, is something we must work at. We do not take this for granted. We see anti-racism and anti-discrimination more broadly as a life-long commitment. We are working towards removing all barriers that staff, applicants and students may experience. Steps taken include having gender-balanced and racially diverse panels, undertaking anti-racism training and unconscious bias training and considering all candidates against a clear, realistic and well-defined person specification. We would particularly encourage applications from under-represented groups, such as people from the Global majority, people with disabilities and those identifying as female, non-binary or trans. Further details Job Description
MS660 - CNC Technician Salary: £40,000 - £55,000 per annum Location: Woolwich Overview: First Military Recruitment are currently seeking a CNC Technician on behalf of one of our clients. This role is for an experienced CNC Technician who is confident in their technical ability and excited by the opportunity to apply CNC manufacturing within a creative, experimental environment. You ll thrive if you re comfortable working in ambiguity, enjoy developing new processes, and bring a strong understanding of materials, mechanics, and operational workflows. A solid grasp of CAD and technical drawings is essential, along with a proactive, collaborative approach to problem-solving. You ll work closely with skilled artists and fabricators, so being team-focused, communicative, and open to shared development is key. If you enjoy precision engineering but are motivated by creativity, innovation, and pushing boundaries, this role will suit you well. Our client encourages applications from ex-military personnel however all candidates will be given due consideration. Duties and Responsibilities: Operate and manage CNC machinery to a high technical and safety standard. Collaborate with artists and designers to translate concepts into manufacturable outcomes. Develop, test, and refine CNC processes for art, R&D, and production applications. Support material testing, tooling development, and process improvement. Contribute to planning and delivery of CNC output in line with project timelines. Maintain clear communication with workshop and production teams to support shared targets. Skills and Qualifications: A proven track record in a workshop environment. Demonstrated use of CNC equipment, including laser, 3D printer, router, etc. Proficiency in CAD software, preferably Rhino. Fluency in CAM software. Proficiency in Adobe Creative Suite (InDesign, Illustrator, Photoshop). Desirable Experience: Familiarity with G-code. Previous work with robots, specifically UR (Universal Robots). Experience working on a gantry router.
Mar 16, 2026
Full time
MS660 - CNC Technician Salary: £40,000 - £55,000 per annum Location: Woolwich Overview: First Military Recruitment are currently seeking a CNC Technician on behalf of one of our clients. This role is for an experienced CNC Technician who is confident in their technical ability and excited by the opportunity to apply CNC manufacturing within a creative, experimental environment. You ll thrive if you re comfortable working in ambiguity, enjoy developing new processes, and bring a strong understanding of materials, mechanics, and operational workflows. A solid grasp of CAD and technical drawings is essential, along with a proactive, collaborative approach to problem-solving. You ll work closely with skilled artists and fabricators, so being team-focused, communicative, and open to shared development is key. If you enjoy precision engineering but are motivated by creativity, innovation, and pushing boundaries, this role will suit you well. Our client encourages applications from ex-military personnel however all candidates will be given due consideration. Duties and Responsibilities: Operate and manage CNC machinery to a high technical and safety standard. Collaborate with artists and designers to translate concepts into manufacturable outcomes. Develop, test, and refine CNC processes for art, R&D, and production applications. Support material testing, tooling development, and process improvement. Contribute to planning and delivery of CNC output in line with project timelines. Maintain clear communication with workshop and production teams to support shared targets. Skills and Qualifications: A proven track record in a workshop environment. Demonstrated use of CNC equipment, including laser, 3D printer, router, etc. Proficiency in CAD software, preferably Rhino. Fluency in CAM software. Proficiency in Adobe Creative Suite (InDesign, Illustrator, Photoshop). Desirable Experience: Familiarity with G-code. Previous work with robots, specifically UR (Universal Robots). Experience working on a gantry router.
