171 jobs found

ARE YOU LOOKING AT GETTING INTO ROLLING STOCK? FANCY A CAREER CHANGE? Job Title: Mechanical Fitter Job Location: southwest London Shifts: 4on-4off, Days and Nights Hourly Rate: 25.60 PAYE/ 33.36 Umbrella Hours Per Week: 40 hours per week on average. Duration: Ongoing Start Date: ASAP Company Summary: A world-renowned Rolling Stock vehicle manufacturing, service and maintenance company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in 60 countries worldwide. Position Summary: You will be responsible for carrying out routine Exam, maintenance, repair and fault finding on Class 701 Electric Multiple Unit. Take overall responsibility of vehicle examinations in line with vehicle maintenance instructions (VMI's). Undertake all types of maintenance examination work to ensure that we provide a safe, reliable, and defect free train. Take responsibility for the safe, efficient and professional workmanship of oneself and others under your control. Undertake 'Designate Person' safety responsibility for applying Depot Protection System and ensure safe systems of work methods are applied Key Responsibilities will include: Undertake technical maintenance to the required standards, and in accordance with all maintenance instructions. Responsible for the accuracy and completeness of all maintenance documentation prior to Shift Production Manager (SPM) validation and authorisation. Responsible to the Shift Production Manager for the accurate identification of outstanding work at the end of the shift. Operation of powered plant, lifting and mechanical handling equipment. Ensuring all problems with processes, tooling and documentation are identified within the team is reported to the Shift Production Manager / Facility Management Team Highlighting potential Health and Safety concerns Compliance with all laid down H&S legislation and depot procedures to ensure a safe accident free environment Responsible for keeping the work area clean and tidy and to the highest standards at all times. Supporting the SPM regarding delivery of Quality, Waste Reduction, Delivery and H&S targets Produce comprehensive reports on specific fault finding investigations Identify potential improvements and feedback to Engineering Constantly searching for ways to improve processes Responsible for the coaching of staff in good working practices and quality standards. Supporting the Shift Production Manager in the identification of training needs Ideal Candidate: A diligent professional able to work well as an individual or in a team. Rolling Stock experience required: History of completing safety critical work Ability to undertake detailed fault finding and analysis by reading and following electrical and pneumatic schematic drawings Comprehensive knowledge of Electrical & Mechanical Principles Computer literate and experience of using a maintenance management system for work recording Hold a full driving licence PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS AN DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION (this is standard procedure on Rail depots) Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.

Mechanical Engineer / Operator-Fitter (Rail Grinding Machines) Location: UK Mobile (Nationwide Travel) Package Overview Starting Salary (Level 1): £43,000 Annual Bonus: 7.5% paid twice yearly (15% total) = £6,450 per year Salary rises after probation and rail safety competencies are passed. Following the rail grinding train around the UK as a service engineer/fitter Working away from home for 3 weeks with 1 rest week every 3 weeks. Shift pattern is 6 days on 1 day off for 3 weeks, then 7 days off. Clear salary and bonus progression annually Job Overview: We are recruiting for experienced Mechanical Engineers / Fitters to join a specialist rail grinding fleet operating nationwide. Working within a close-knit team of approximately 12 engineers per train, you will maintain, fault-find and operate heavy rail-mounted grinding trains that restore rail profiles and ensure the safety and performance of the UK rail network. This is a physically demanding, hands-on role involving mechanical overhauls, hydraulic systems maintenance and night working when trained in the future to operate the grinder train. The role requires extended travel, with 3 weeks per month working away from home. This position would suit candidates from heavy plant, rail, mining, marine, military or other heavy industrial maintenance backgrounds. Key Responsibilities Maintain and operate rail grinding machines in line with operational plans and rail safety standards Carry out preventative and reactive maintenance on mechanical, hydraulic and pneumatic systems Strip down, inspect and rebuild grinding heads, motors, gearboxes and drive assemblies Change and set grinding stones, monitoring grinding output and machine performance Diagnose and repair hydraulic faults (pumps, cylinders, hoses, valves) Complete daily inspections, underframe cleaning and component servicing Fault-find mechanical and basic electrical control systems Work safely within rail possessions during night and weekend shifts Accurately complete maintenance documentation and defect reports Maintenance and Operation: Maintain, fault-find and repair rail grinding machines and on-track plant Carry out preventative and reactive maintenance on hydraulic, pneumatic and mechanical systems Inspect and maintain pumps, motors, gearboxes, hoses, cylinders and valves Diagnose hydraulic pressure faults and mechanical wear issues Strip down, rebuild and replace worn components Undertake daily safety inspections and underframe cleaning Use hand tools, torque equipment and diagnostic test gear Complete maintenance records and work in line with rail safety standards Safety & Compliance: Ensure compliance with health, safety, and environmental safeguards. Complete daily work return forms and maintain machine safety packs and operational records. Serve as 2nd man/fire watch during grinding operations. Carry out Controller of Site Safety (COSS) duties if required. Person Specification: Qualifications & Experience: MUST HAVE: NVQ Level 3 in Mechanical Engineering or a formal apprenticeship in Mechanical/Electrical Engineering. Previous experience in heavy industrial maintenance, such as agriculture, aggregates, rolling stock, offshore, or plant fitting. Hydraulics and pneumatics experience is highly desirable. Must hold a full driving licence, NO MORE THAN 3 POINTS Must pass a full rail medical and drug and alcohol screening test Must pass a criminal record background check (DBS) Work Schedule: Shift Patterns: 6 days on, 1 day off while away, when working a 4-night shift pattern, you will be given 2 days off. You will be working 280 hours over 8 weeks. You will be provided with a detailed monthly rota, but flexibility is essential. Travel: Extensive travel across the UK. Full Hotel lodging will be provided at Holiday Inn hotels or Premier Inns, with your own room and breakfast included. £45 per night paid when working away as your allowance, which is £7,500 per year and paid into your salary each month Holiday & Time Off: 34 days annual leave (including bank holidays). 1 rest week off every 3 weeks (13 weeks per year) Additional Benefits: The use of a company van and fuel card when needed. Life assurance and health care cash plan. Pension scheme. Employee Assistance Programme for well-being. Eye care vouchers. Long service awards and seasonal ticket loan options. Training & Progression: Full training will be provided, including manual handling, machine setup, and pack-away for operation. Progression opportunities include advancing from Level 1 to Level 3, with the chance to increase salary significantly within two years. Opportunities for further progression include training to become a train driver, which requires a psychometric test. Work Environment: You will work in a close-knit team of engineers, building long-lasting relationships. The work involves being on board rail grinding machines, working in dirty and dusty conditions. You will have access to "a comfort carriage" on the trains, providing facilities such as a small breakout area, kitchen, toilets, and a manager s office. We prioritise your safety, providing full protective gear, including air-supplied masks and safety boots. To apply for this role, please send your CV through the link, and we will call you back ASAP for a chat about your situation and also your availability to attend an interview.

MET Technician Location: Chelmsford Salary: Up to £55,000 OTE £65,000+ Hours: Mon-Fri, 40h week Benefits: Achievable Bonus, Flexibility and early starts and finishes available, 30 Days holiday Job Description: Our client is looking for a talented and efficient MET Strip Fitter / MET Technician to join this leading team. You will be repairing damaged vehicles in line with manufacturers' specifications within a state-of-the-art body shop, utilising modern equipment and techniques. Qualifications Required for an MET Strip Fitter / MET Technician: Will have served a recognised apprenticeship as a MET Strip Fitter / MET Technician and gained a technical qualification (such as NVQ / ATA / IMI / SVQ) Must have previous experience working as a MET Technician / MET Strip Fitter within a busy body shop Strong team player with self-motivation to earn bonus hours Experience with Geometry work and 4-wheel alignment Sound up-to-date knowledge of vehicle repair techniques Diagnostic training Duties of an MET Strip Fitter / MET Technician: Work efficiently in a fast-paced accident repair centre Follow correct repair techniques and work to factory specifications Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as required Use diagnostic tools to identify and fix system faults Perform quality checks to ensure work meets industry standards Collaborate with colleagues to ensure smooth workflow Maintain accurate records of work completed Adhere to all safety protocols and industry regulations Click 'Apply Now' if interested in joining this dynamic team. INDHIGH

OE Assembly Fitter Shifts: Days, Lates, Nights & Weekends Shape the Future of Aerospace at Safran Are you ready to contribute to ambitious projects and create a positive impact in the aerospace industry? At Safran, you'll work with the brightest minds and best technologies, building valuable experience and joining an innovative, supportive team. We are a global leader in aircraft landing and braking systems, from commercial and business travel to military and defence fleets. Our expertise cover the entire life cycle of our products from end-to-end: design, manufacturing, maintenance and repair. Why Work at Safran? Your Wellbeing & Benefits: Looking after the people who make Safran great is our priority. We offer a range of benefits designed to support you-both in and out of work, including: Early finish on Fridays (where applicable) Competitive salary and annual bonus 25 days' holiday + bank holidays (option to buy/sell) Flexible working options Pension (matched up to 8%) and life assurance Professional development, ongoing training, mentoring Onsite amenities: parking, restaurant, bicycle storage, showers Family-friendly and accessible workplace policies Join Us as an Assembly Fitter Bring your technical skills and precision to a role where quality and craftsmanship matter. You'll work on complex assemblies, interpreting engineering drawings and applying your expertise to deliver components that meet exacting standards. In a collaborative environment, you'll contribute to continuous improvement and help shape the future of aerospace manufacturing. What you'll be doing Assemble components and complete production acceptance testing to strict specifications. Interpret and work from technical drawings, specifications, and test instructions. Apply 5S principles and continuous improvement practices to maintain high standards. Perform turning and grinding operations, and design or make tooling when required. Ensure compliance with FOD and COSHH requirements throughout all activities What you'll bring A full Level 3 engineering apprenticeship and proven fitting experience in aerospace or automotive. Strong understanding of specifications, procedures, and quality standards. Ability to work flexibly and contribute to improvement initiatives. Skilled in assembly techniques, with experience in turning and grinding; electrical knowledge is a plus. Attention to detail and commitment to safety and compliance. Join Us Here, we craft excellence together. If you're looking for a place to grow, make an impact, and be part of something bigger, we'd love to hear from you. We are committed to building a workforce that is reflective of the diverse community we serve. We want to attract the best applications from people of all backgrounds and underrepresented groups because we strongly believe in adding value through diversity, inclusion, and equality. Some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert, however, we encourage you to apply if you can demonstrate a variety of skills and experiences relevant to the requirements of this role. We strive to provide reasonable adjustments throughout the recruitment process and employment. Let us know via recruitment.team. if you need support to showcase your talents or require any reasonable adjustments with your application Offers of employment will be subject to a relevant level of company security vetting, which includes a criminal record check

kolt recruitment are looking for a Strip Fitter to join a busy and well-established accident repair centre based in Southampton. This is a great opportunity for an experienced Strip Fitter to join a professional bodyshop with a strong reputation for delivering high-quality repairs. You will be responsible for stripping and refitting vehicles as part of the repair process, ensuring all components are removed and refitted correctly to support efficient and accurate vehicle repairs. Key Responsibilities Strip damaged vehicles ready for panel and paint repairs Refit vehicle components following completion of repairs Remove and refit mechanical, electrical and trim components Identify damaged parts and report any additional repair requirements Work closely with panel beaters and painters to maintain efficient workflow Ensure all work is completed to manufacturer and industry standards Maintain a clean and organised work environment Requirements Previous experience working as a Strip Fitter or MET Technician within a bodyshop or accident repair centre Strong knowledge of vehicle components and bodyshop repair processes Ability to work efficiently in a fast-paced workshop environment Good attention to detail and organisational skills Ability to work independently and as part of a team ATA accreditation is beneficial but not essentia This is a fantastic opportunity to join a growing accident repair business offering stability, modern facilities and long-term career prospects. Kolt Recruitment are a specialist recruitment agency within the automotive industry

kolt recruitment are looking for an experienced MET / Strip Fitter to join a busy and well-established accident repair centre based in Sandown. This is a great opportunity to join a professional bodyshop with a strong reputation for delivering high-quality repairs. You will be responsible for stripping and refitting vehicles as part of the repair process, ensuring all components are removed and refitted correctly to support efficient and accurate vehicle repairs. Key Responsibilities Strip damaged vehicles ready for panel and paint repairs Refit vehicle components following completion of repairs Remove and refit mechanical, electrical and trim components Identify damaged parts and report any additional repair requirements Work closely with panel beaters and painters to maintain efficient workflow Ensure all work is completed to manufacturer and industry standards Maintain a clean and organised work environment Requirements Previous experience working as an MET Technician or Strip Fitter within a bodyshop or accident repair centre Strong knowledge of vehicle mechanical, electrical and trim components Ability to work efficiently in a fast-paced workshop environment Good attention to detail and organisational skills Ability to work independently and as part of a team ATA accreditation is beneficial but not essential This is a fantastic opportunity to join a growing accident repair business offering stability, modern facilities and long-term career prospects. Kolt Recruitment are a specialist recruitment agency within the automotive industry.

MET Technician Location: Lincoln Annual Salary: Up to £65,000 per year Hours: Monday to Friday 42.5h week Benefits: Excellent Time Saved Bonus Scheme with uncapped earning potential, 30 Days holiday and more. Our client is looking for a talented and efficient MET Strip Fitter / MET Technician to join a leading team. You will be repairing damaged vehicles in line with manufacturer specifications in a state-of-the-art body shop, using the latest equipment and techniques. Key Responsibilities of an MET Strip Fitter / MET Technician: Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as needed Use diagnostic equipment to identify and fix issues in the vehicle's systems Perform quality checks to ensure repairs meet industry standards Collaborate with other team members to ensure efficient workflow Maintain accurate records of all work performed Adhere to all safety protocols and standards Essential Skills and Qualifications for an MET Strip Fitter / MET Technician: Recognised apprenticeship as a MET Strip Fitter / MET Technician Technical qualification (NVQ / ATA / IMI / SVQ) Previous experience in a busy bodyshop environment Experience with Geometry work and 4-wheel alignment Up-to-date knowledge of vehicle repair techniques Diagnostic training Self-motivated and a strong team player Click 'Apply Now' to take the next step in your career. INDBS

Mobile Fleet Technician - Kent Day shifts Up to £55,000- Paid door to door Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Callouts Preventative Maintenance Emergency Breakdowns Pre-arranged servicing at rural sites MOT Preparation Engine work and diagnostic investigations Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections You will be travelling within a designated area and have use of a fully equipped van. We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker Abiding by health and safety rules A problem solver with a can-do mindset In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV s, Gritters, Refuse Collection Vehicles, Tankers, Sweepers, Flat Beds and Cherry Pickers. Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required. Class2 Licence would be beneficial. You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. Benefits you will start with 25 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. If this role isn t for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.

Senior Mechanical Design Engineer East Midlands - commutable from Derby, Leicester and Nottingham c£45k neg dep exp + benefits Our client can demonstrate almost half a century's expertise in the design, development and manufacture of bespoke automation and robotic systems for a diverse range of industry sectors and are regarded by many in the industry as one of the leading automation system solution providers in the whole of the UK. As a result of continued success and a planned programme of strategic growth, they are now seeking to recruit an experienced Lead / Senior Mechanical Design Engineer to complement their established and successful team and deliver innovative special purpose automation machinery projects. Based near Leicester and tasked with both designing and overseeing an array of special purpose machine projects from order acceptance to customer hand over, the successful Senior Mechanical Design Engineer candidate will be responsible for the design, detailing and successful delivery of multiple projects, communicating effectively with customers, suppliers and team members as required and working as part of a team dedicated to delivering projects to on time and within budget. After attending sales hand over meetings and committing to an overall project plan and budget, you will perform mechanical design and detailing functions for multiple projects allocated to you using 3D CAD within the time allocated in the project plan, and will arrange Design Reviews during the design process to ensure they are well executed, meet overall requirements, are designed for assembly, robust & reliable operation, and meet or better budgetary constraints whilst minimising any development issues that may arise. You will also obtain a Design Pass Off by the customer on time and to project plan and ensure that BOM's are produced on time and within budget, and will negotiate with external suppliers in order to obtain the most cost-efficient materials in line with project budgets and timing plans. You will also be responsible for assisting the electrical design process by communicating clearly and effectively through the duration of the project and especially through the mechanical design phase, and will compile a build folder and communicate build details to the machine tool fitters to ensure an efficient build process. Other responsibilities for this varied and challenging Senior Mechanical Design Engineer role will include providing direction and support to fitters, electricians and other engineers within the team as required, and undertaking visits to customer sites as appropriate to fully understand the customer requirements and to obtain measurements for all dimensions, drawings, site layouts and other considerations, and will document and communicate all such requirements to the customer and internal staff respectively. You will assess and improve design concepts along with a team at sales quotation stage to reduce risks, costs, lead times and be skilled in identifying key risks and assist in compiling plans for trials to reduce them. You will obtain all parts, samples and drawings necessary in advance to ensure these can be checked and used through the design phase and will check the design work produced by other designers to ensure accuracy of design work, as well as conducting project reviews with customers on a periodic basis and reporting on the status of each project whilst constructing and maintaining a comprehensive Technical Construction File (TCF) which includes manuals, risk assessments, mechanical parts list and drawings. Other duties will include carrying out machine risk assessments during the design phase to ensure Machinery Directive requirements are met and leading projects during the development and installation phases of the project with pro-active and timely delivery of "problem fixes" whilst ensuring that all H&S and safety rules, guidelines and policies are understood and adhered to at all times. To be considered for this varied and challenging role it is envisaged that the successful candidate will demonstrate considerable competence and experience in mechanical design, robotics, automation, design of mechanical mechanisms and pneumatic systems and will realistically be Degree qualified/HNC/HND or equivalent in Mechanical Engineering or a closely related discipline with a minimum of 7 years' experience in mechanical design role ideally related to automation machinery. You will be an expert user of 3D parametric CAD package, ideally Solidedge however use of Solidworks, Inventor, Creo etc would also be considered, and will demonstrate a proven track record of successfully delivering mechanical design projects to required timescale and budgetary constraints. Knowledge and understanding of the various national and international standards for machine design and machine safety systems and requirements to CE mark machine systems is required, as is a self-motivated positive "can do" approach to problem solving. You will be commercially aware of the actions and responsibilities of your role when dealing with customers and able to communicate effectively at all levels and demonstrate a track record of being part of a multi-disciplined team to solving problems. Contact the Design Team at Premier Technical Recruitment on or email your cv in confidence to for further details.

We are seeking a skilled Mechanical Fitter to join our clients team. In this role, you will be responsible for producing high-quality products to the required standards, as defined by drawings, written instructions, and guidance from the supervisor. Key Responsibilities: - Complete engineering duties for sub-assembly production, fitting, and final assembly - Assemble mechanical, electrical, pneumatic, hydraulic, and electronic components and sub-assemblies as required - Assist with the production and build of fabricated assemblies of varying size and complexity, using general skills such as marking out, cutting, folding, pipe bending, weld joint preparation, hydraulic runs, and pneumatic runs - Comply with the company's health and safety policies and procedures, ensuring your own safety and that of others - Perform any other duties as reasonably expected by the company Required Skills and Qualifications: - Solid engineering background with experience working from manufacturing drawings, general arrangement drawings, and sub-assembly drawings - Proficiency in using a variety of hand and power tools to assemble a wide range of large and small fabricated components - Ability to check the complete assembly for alignment, dimensions, and quality - Experience in vehicle fabricating/fitting is an advantage - Strong problem-solving skills and a logical mindset - Knowledge of pneumatics, hydraulics, and electrical circuitry - Background in aviation, military, marine, or a similar industry is desirable - Basic electrical assembly skills and the ability to read electrical circuit drawings are preferred but not essential This role is working Days, Monday-Friday and offers a competitive salary with bonus incentives. If you are an experienced Mechanical Fitter with a passion for delivering high-quality work, we encourage you to apply for this exciting role. Should this role be of interest, please submit your CV to Barry Salters, Email - (url removed) Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

kolt recruitment are looking for a strip fitter to join a well-established independent accident repair centre based in sevenoaks.this is a fantastic opportunity for an experienced strip fitter to join a busy, professional bodyshop environment where quality and efficiency are key. key responsibilities: strip and refit accident-damaged vehicles to manufacturer standards remove and refit mechanical and electrical components identify additional damage and report findings accurately ensure all work is completed safely and to a high standard work closely with panel technicians and paint team to meet deadlines requirements: proven experience as a strip fitter / MET technician within a bodyshop strong knowledge of vehicle systems and components ability to work efficiently in a fast-paced environment attention to detail and commitment to quality workmanship full uk driving licence if you're a skilled strip fitter looking for a stable role within a reputable independent repair centre, this could be the ideal next step in your career. kolt recruitment specialise in automotive recruitment across the uk, connecting skilled professionals with leading employers in the industry.

WH Bence have an exciting opportunity for an Electrical Service Engineer to join their team. Location: Yate, Bristol, BS37 5NG (Nationwide) Salary: £40,500 to £46,500 per annum with OTE with overtime and additional payments, dependent on qualifications and experience Job Type: Full - time, Permanent Yard Working Hours: 08:00 to 16:30 (with early/late finishes and weekend work) About Us: WH Bence has been in business for over 30 years as specialist coachbuilders. Contracts include the manufacture and conversion of vehicles for the emergency services, command & control vehicles, hospitality trailers, racing trailers and mobile medical units. Bence also provides full after sales back-up and servicing throughout the UK and Ireland. Electrical Service Engineer - This Role: We are seeking an experienced Electrical Service Engineer with a strong HGV maintenance and repair background to join our expanding field service team. Are you a trained mechanic/plant fitter looking for a new challenge? This is a varied and interesting role that would suit someone with a mechanical background, an eye for detail and general maintenance skills. Due to expansion, specialist coachbuilder WH Bence requires an experienced engineer to join the team. The successful candidate will work at our service premises in Yate, near Bristol, but will also be required to work on our specialist vehicle contracts throughout the UK and Ireland. A service van and company mobile will also be provided as Bence service engineers share a stand by call out on rota which involved working overtime, which increased earnings. As this is a mobile role you will be required to stay away from home, as needed. You will join the current team to provide after-sales support and fulfil long term contracts for preventative maintenance, for which training will be provided. After training you will be expected to be able to problem solve whilst on a client's site with telephone support from the Bence Service Manager. Electrical Service Engineer - Key Responsibilities: - Carry out mobile servicing, diagnostics, and repair of HGVs and commercial vehicles - Perform breakdown assistance - Complete service reports and maintain accurate records - Provide exceptional customer service on-site Electrical Service Engineer - You: - Must hold a full Category B driving licence to apply for this role - A sound knowledge of servicing and maintaining trailers and vehicles is required - Experience in auto vehicle electrics and hydraulics will be advantageous though not essential Electrical Service Engineer - Benefits: - Competitive salary - Call out payment - Paid overtime available - Pension contributions - Company van - Company mobile phone - Training programmes available Click 'Apply' now to submit your application for this exciting Electrical Service Engineer opportunity!

Air Personnel are looking for B2 Licence Engineers for their client based in Shawbury. Fantastic Opportunity with a salary that has recently been improved! PLEASE NOTE - It is our policy to require all applicants to demonstrate they have the right to remain and to work in the UK. Description/Overall purpose of the Job The B2 Licensed Engineer is responsible for the certification of line, non-routine maintenance and repair on Airbus H135/H145 rotorcraft. Type training will be provided for a suitable candidate. The Main Responsibilities Of The Post Holder Will Be: Provide engineering operational support to Flight Operations. Accomplishment of maintenance inspections and repairs as directed by nominated LAE Supervisor. Work as a team leader and to high standards to ensure continued safe operation of the aircraft. Completion of maintenance, including avionic and electrical systems. Replacement of avionic line replaceable units, requiring simple tests to prove their serviceability. Supervision of avionic and electrical fitters and the certification of their work. Conduct off-aircraft avionic and electrical technical work in Av workshop as required. Also required to assist in day to day running of the aircraft Hangar, including aircraft movement and general housekeeping responsibilities. Knowledge and Skills: ESSENTIAL Must have thorough knowledge of helicopter avionic and electrical systems. Knowledge of specialised test equipment relating to avionic and electrical systems. Must have up to date knowledge of : CAA regulations, particularly Pt 145, Part M Continued Airworthiness Management (CAM) Flight/Airport Operations Aircraft Line Maintenance DESIRABLE Knowledge of UK Military Aviation and UK MFTS. Experience with SAP and ERP software. We require the post holder to have the following Education, Qualifications or special training: ESSENTIAL CAA Part 66 B2 Licence. DESIRABLE Type Rating and experience H135/H145. ESSENTIAL The post holder should have the following experience: 3 years experience in a certifying role. Experience of Flight Operations and Line Maintenance. DESIRABLE Experience of Airbus Helicopters products. Experience of Military Aviation. Key Performance Indicators: Maintain aircraft availability levels of >98% at Shawbury (including deployments). Other Requirements: TRAVEL Required to work shifts as part of normal working routine. Required travel between Shawbury, Valley and areas dictated by Operational requirements (Deployments on a 3 weekly cycle). Please call Michelle for further details or apply with your CV

Workshop Plant Fitter - Banbury - Bonus + Unlimited Overtime paid at 1.5 - Growing company so opportunities to progress - OTE = 55,000 - 60,000 What's in it for you? Package consisting of a salary from 35,000 Unlimited overtime available, paid at 1.5 rate Potential to earn an additional 2000 bonus on top OTE = 55,000 - 60,000 Comprehensive manufacturing training to enhance your skills. Excellent career progression opportunities. A great location in Banbury. As a Workshop Plant Fitter in Banbury, you'll be responsible for: Fixing, servicing, and maintaining excavators, telehandlers, dumpers, rollers, and other plant equipment. Conducting routine inspections and preventative maintenance. Diagnosing and repairing mechanical and electrical faults. Ensuring all equipment is safe and compliant with industry standards. We're looking for a Mechanical Engineer or Engineer with: NVQ/City & Guilds in an engineering discipline (preferred but not essential). A valid UK driving licence. Experience as a plant fitter or plant engineer. Other industries considered: Plant / Agriculture / Powered Access / Vehicle / HGV / Generator / Crane / Forklift This is your chance to make a real impact as a Workshop Plant Fitter in a thriving company in Banbury. If you're a motivated plant fitter with a passion for plant equipment, we want to hear from you! Apply now! Consultant Name: Dean Grey Job Number: (phone number removed) / INDPLANT Call us now on: (phone number removed) Platinum Recruitment is acting as an Employment Agency in relation to this vacancy.

Workshop Forklift Engineer - Banbury - OTE = 55,000 - 60,000 + Bonus + Unlimited Overtime paid at 1.5 - Growing company so opportunities to progress Are you a skilled Fitter looking for a challenging and rewarding role? We're seeking a dedicated Forklift Engineer to join a dynamic team in Banbury , where you'll play a crucial role in maintaining and servicing a range of plant equipment. This is a fantastic opportunity to develop your skills and advance your career as a Forklift Engineer in Banbury . What's in it for you? Package consisting of a salary from 35,000 Unlimited overtime available, paid at 1.5 rate Potential to earn an additional 2000 bonus on top OTE = 55,000 - 60,000 Comprehensive manufacturing training to enhance your skills. Excellent career progression opportunities. A great location in Banbury . As a Workshop Forklift Engineer in Banbury , you'll be responsible for: Fixing, servicing, and maintaining diesel, gas and electric forklifts as well as telehandlers. Conducting routine inspections and preventative maintenance. Diagnosing and repairing mechanical and electrical faults. Ensuring all equipment is safe and compliant with industry standards. We're looking for a Mechanical Engineer or Engineer with: NVQ/City & Guilds in an engineering discipline (preferred but not essential). A valid UK driving licence. Experience as a Forklift Engineer or plant engineer. Other industries considered: Plant / Agriculture / Powered Access / Vehicle / HGV / Generator / Crane / Forklift This is your chance to make a real impact as a Workshop Forklift Engineer in a thriving company in Banbury . If you're a motivated forklift engineer with a passion for forklifts and telehandlers, we want to hear from you! Apply now! Consultant Name: Dean Grey Job Number: (phone number removed) / INDPLANT Call us now on: (phone number removed) Platinum Recruitment is acting as an Employment Agency in relation to this vacancy.

Workshop Forklift Engineer - Horsham - OTE = 55,000 - 60,000 + Bonus + Unlimited Overtime paid at 1.5 - Growing company so opportunities to progress Are you a skilled Fitter looking for a challenging and rewarding role? We're seeking a dedicated Forklift Engineer to join a dynamic team in Horsham, where you'll play a crucial role in maintaining and servicing a range of plant equipment. This is a fantastic opportunity to develop your skills and advance your career as a Forklift Engineer in Banbury. What's in it for you? Package consisting of a salary from 35,000 Unlimited overtime available, paid at 1.5 rate Potential to earn an additional 2000 bonus on top OTE = 55,000 - 60,000 Comprehensive manufacturing training to enhance your skills. Excellent career progression opportunities. A great location in Horsham. As a Workshop Forklift Engineer in Horsham, you'll be responsible for: Fixing, servicing, and maintaining diesel, gas and electric forklifts as well as telehandlers. Conducting routine inspections and preventative maintenance. Diagnosing and repairing mechanical and electrical faults. Ensuring all equipment is safe and compliant with industry standards. We're looking for a Mechanical Engineer or Engineer with: NVQ/City & Guilds in an engineering discipline (preferred but not essential). A valid UK driving licence. Experience as a Forklift Engineer or plant engineer. Other industries considered: Plant / Agriculture / Powered Access / Vehicle / HGV / Generator / Crane / Forklift This is your chance to make a real impact as a Workshop Forklift Engineer in a thriving company in Horsham. If you're a motivated forklift engineer with a passion for forklifts and telehandlers, we want to hear from you! Apply now! Consultant Name: Dean Grey Job Number: (phone number removed) / INDPLANT Call us now on: (phone number removed) Platinum Recruitment is acting as an Employment Agency in relation to this vacancy.

Mechanical Design Engineer East Midlands - commutable from Derby, Leicester and Nottingham to c£46k neg dep exp + benefits Our client can demonstrate almost half a century's expertise in the design, development and manufacture of bespoke automation and robotic systems for a diverse range of industry sectors and are regarded by many in the industry as one of the leading automation system solution providers in the whole of the UK. As a result of continued success and a planned programme of strategic growth, they are now seeking to recruit an experienced Lead / Senior Mechanical Design Engineer to complement their established and successful team and deliver innovative special purpose automation machinery projects. Based near Leicester and tasked with both designing and overseeing an array of special purpose machine projects from order acceptance to customer hand over, the successful Senior Mechanical Design Engineer candidate will be responsible for the design, detailing and successful delivery of multiple projects, communicating effectively with customers, suppliers and team members as required and working as part of a team dedicated to delivering projects to on time and within budget. After attending sales hand over meetings and committing to an overall project plan and budget, you will perform mechanical design and detailing functions for multiple projects allocated to you using 3D CAD within the time allocated in the project plan, and will arrange Design Reviews during the design process to ensure they are well executed, meet overall requirements, are designed for assembly, robust & reliable operation, and meet or better budgetary constraints whilst minimising any development issues that may arise. You will also obtain a Design Pass Off by the customer on time and to project plan and ensure that BOM's are produced on time and within budget, and will negotiate with external suppliers in order to obtain the most cost-efficient materials in line with project budgets and timing plans. You will also be responsible for assisting the electrical design process by communicating clearly and effectively through the duration of the project and especially through the mechanical design phase, and will compile a build folder and communicate build details to the machine tool fitters to ensure an efficient build process. Other responsibilities for this varied and challenging Senior Mechanical Design Engineer role will include providing direction and support to fitters, electricians and other engineers within the team as required, and undertaking visits to customer sites as appropriate to fully understand the customer requirements and to obtain measurements for all dimensions, drawings, site layouts and other considerations, and will document and communicate all such requirements to the customer and internal staff respectively. You will assess and improve design concepts along with a team at sales quotation stage to reduce risks, costs, lead times and be skilled in identifying key risks and assist in compiling plans for trials to reduce them. You will obtain all parts, samples and drawings necessary in advance to ensure these can be checked and used through the design phase and will check the design work produced by other designers to ensure accuracy of design work, as well as conducting project reviews with customers on a periodic basis and reporting on the status of each project whilst constructing and maintaining a comprehensive Technical Construction File (TCF) which includes manuals, risk assessments, mechanical parts list and drawings. Other duties will include carrying out machine risk assessments during the design phase to ensure Machinery Directive requirements are met and leading projects during the development and installation phases of the project with pro-active and timely delivery of "problem fixes" whilst ensuring that all H&S and safety rules, guidelines and policies are understood and adhered to at all times. To be considered for this varied and challenging role it is envisaged that the successful candidate will demonstrate considerable competence and experience in mechanical design, robotics, automation, design of mechanical mechanisms and pneumatic systems and will realistically be Degree qualified/HNC/HND or equivalent in Mechanical Engineering or a closely related discipline with a minimum of 7 years' experience in mechanical design role ideally related to automation machinery. You will be an expert user of 3D parametric CAD package, ideally Solidedge however use of Solidworks, Inventor, Creo etc would also be considered, and will demonstrate a proven track record of successfully delivering mechanical design projects to required timescale and budgetary constraints. Knowledge and understanding of the various national and international standards for machine design and machine safety systems and requirements to CE mark machine systems is required, as is a self-motivated positive "can do" approach to problem solving. You will be commercially aware of the actions and responsibilities of your role when dealing with customers and able to communicate effectively at all levels and demonstrate a track record of being part of a multi-disciplined team to solving problems. Contact the Design Team at Premier Technical Recruitment on or email your cv in confidence to

Job title: Mechanical Fitter - Hydraulics Job location: Burton Hours per week: 40 hours per week Days only Monday to Thursday: 7:00am - 4:00pm Friday: 7:00am - 1:00pm Duration: 6 months (May go Permanent) Start date: ASAP Client Summary: A global, leading engineering company specialising in the repair and overhaul of heavy engines for the rail industry. Position Summary: We are recruiting a Hydraulics Fitter to support ongoing rail projects at the Burton upon Trent site. This is a bench-based role working as part of a team, stripping and rebuilding mechanical and hydraulic systems on locomotive rafts and transmissions. Roles can include: Strip down engines, transmissions, and mechanical components for overhaul Build and rebuild transmissions and raft assemblies within the rail industry Fit refurbished engines back onto locomotive rafts, including all associated components such as radiators, pumps, tanks, pipework, and electrical looms Install, repair, and overhaul hydraulic systems Overhaul raft components to required standards Read and understand schematic and technical drawings Work to realistic build and strip timescales Undertake training as required Mentor trainees or apprentices when applicable Ensure waste is disposed of correctly and in line with site procedures Person Profile/Experience: Strong mechanical fitting background is essential Good knowledge of hydraulics is ideal Benchwork experience preferred Backgrounds in HGVs, large engines, rolling stock, plant, or heavy goods are ideal Understanding of engines, hydraulics, and pneumatics is highly advantageous Qualifications Relevant engineering qualifications are desirable but not essential for experienced candidates Contact Information: James Bell Email: (url removed)

Workshop Fitter - Early and late shifts available £46000 - £57000 basic This is a new opportunity for an experienced Vehicle Engineer who wishes to operate in a high quality workshop. This company will aid you on your career journey. You can expect to be trained on new products and put through the required courses such as Irtec. Your working days will be diverse and interesting, no 2 days will be the same. You could be working on main dealer heavy goods vehicles (HGVs) hook loaders, Municipal Vehicles (Gritters, Dust Carts, Sweepers) and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC or EV qualification would be desirable, as would a HGV Class 1 or Class 2 licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. Dust Cart

Position: Electrical Fitter / Panel Wirer Location: Gloucester Type of work: permanent Salary: £30000 to £34000 Working hours: 37 hours Monday to Friday (early finish on Friday) and every other Friday off. Benefits: 33 days of holidays inclusive of BH, early finish, annual bonus, free parking, stake holder pension, heath care plan, free drinks on site, group life assurance. We are now seeking to recruit an electrical fitter to work for a busy manufacturing business based in Gloucester. The appropriate electrical fitter would be responsible for previous experience in electrical wiring and panel building. Responsibilities of electrical fitter: Working off blueprints carrying out electrical fitting of sub-assemblies onto special purpose machines Working with bespoke build This position will suit somebody with experience of wiring, panel building and electrical fitting with an experience in problem solving. Secure and fix cables, looms, switches, and other electric devices to machine assemblies Assembly of electrical wiring looms to drawings Working with 1 and 3 phase motors Use electrical measuring equipment where necessary. Requirements of electrical fitter: Previous electrical experience in panel wiring and wiring industrial machines, qualifications are desirable but not essential. Proven ability to read and interpret electrical drawings. Skilled problem solver who looks for best solution to ensure highest quality products. Good Attention to details and fault-finding skills Ability to work on your own initiative as well as part of the team. If you think this is appropriate opportunity, please email your CV to (url removed) or contact Marta on (phone number removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.