523 jobs found

Location: Offshore and Onshore (EU-based project sites) Schedule: Full-time, with potential for shift-based rotations and on-call responsibilities Requirements: GWO and HUET training (preferred if already completed and valid) Ability to pass a medical fitness test (preferred if already valid) Ability to lift up to 50 lbs Proficient in Microsoft Office (Word, Excel, Outlook, etc.) Role Overview: The successful candidate will be responsible for overseeing the implementation of electrical safety systems and ensuring the safe commissioning and operation of high, medium, and low voltage electrical infrastructure across onshore substations, offshore wind turbines, and associated cable networks. This role will support all phases of project construction, commissioning, and operational readiness. Key Responsibilities: Implement and manage site-based Electrical Safety Rules, ensuring a safe system of work. Provide expert operational advice on MV/HV/LV electrical systems including offshore substations, WTGs, and both submarine and onshore cables. Ensure safe commissioning and energization of grid connections and electrical plant/equipment. Oversee all MV/HV/LV operational activities to protect personnel safety and network integrity. Coordinate commissioning activities through project construction stages. Take operational electrical responsibility for entire substations. Respond to work in adverse weather/emergency scenarios and potential on-call situations. Conduct electrical safety coordination and act as Senior Authorized Person (SAP). Manage outage scheduling and network control in cooperation with Control Engineers. Inspect and audit work sites for electrical safety compliance. Update schematic diagrams and verify accuracy. Prepare and review HV switching schedules and method statements. Provide training and mentoring to staff in electrical safety procedures. Attend FATs/SATs and commissioning panel meetings as needed. Support internal departments and act as liaison for technical electrical advice. Deliver toolbox talks and ensure safe start procedures for working parties. Execute pre- and post-energization checks on all wind farm electrical equipment. Assist with both onshore and offshore work rotations as required. Deliverables: Input to commissioning management manuals and quality plans (pre-commissioning and commissioning). Reports from Factory and Site Acceptance Tests (FAT/SAT) of HV equipment. Onsite verification of switching programs. Participation in audits and technical planning sessions. Resource planning and activity scheduling. Technical input during the design phase of the project. Issuance of Electrical Safety documentation. Physical execution of HV/MV/LV switching and isolations. Grounding and creation of isolation zones. Demarcation of work zones for contractors. Administration and documentation to support the Lead SAP. Participation in staff authorizations and candidate assessments. Decision Authority / Responsibilities: Authority in matters related to MV/HV switching and isolations. Issuance and management of safety documentation under the Electrical Safety Rules. Oversight of all on-site electrical safety practices and compliance.

AR831 - Workshop Forklift Engineer Location: Perry Barr Salary: £30,000 - £35,500 + Overtime + Benefits Overview: First Military Recruitment are currently seeking a Workshop Forklift Engineer on behalf of one of our clients.The successful candidate will be responsible for carrying out routine maintenance and repairs to long/short term machines and customers owned equipment. Ensuring best practice with quality and professionalism are met at all times and to maintain customer satisfaction.Our client strongly encourages applications from ex-military personnel however, all candidates will be considered. Duties and Responsibilities: Servicing and repair of forklift trucks and other lifting equipment. Carrying out routine maintenance. Checking oil and fuel levels. Checking all related hoses and connections. Steering and brake checks. Basic electrical checks - brake lights etc. Liaising with customers regarding their individual requirements. Submit accurate parts requisition information to Head Office. Acting as the face of the company and therefore acting as a brand ambassador. Skills and Qualifications: A good mechanical engineering background is essential. Customer focused. Ability to work as part of a team or on an individual basis where required. Excellent time management skills Excellent communication skills - both verbal and written. Experience with forklift trucks, military, agricultural or plant equipment is highly desirable. Full UK driving licence. Location: Perry Barr Salary: £30,000 - £35,500 + Overtime + Benefits

Manufacturing QHSE & Technical Compliance Manager - 50k Role: Manufacturing QHSE & Technical Compliance Manager Location: Trafford Park Employer: Manufacturer Shift: Mon - Fri - Days Salary: 50,000 The Opportunity We are seeking a hands-on Manufacturing QHSE & Technical Compliance Manager to lead the quality and compliance functions for a market-leading vehicle bodybuilding operation. Working closely with production, engineering, and leadership teams, you will embed a "safety-first" quality culture into every stage of the build-from fabrication and welding through to final vehicle approval. The Role (Day-to-Day) Policy & Compliance: Oversee all QHSE policies and procedures across two manufacturing sites. Technical Standards: Ensure all vehicle bodybuilding and modifications strictly adhere to Type Approval (IVA, VCA, DVSA) and industry regulations. Systems Management: Develop and maintain ISO 9001, 14001, and 45001 frameworks. Continuous Improvement: Lead Root Cause Analysis (RCA) and manage Non-Conformance Reports (NCRs) to drive positive change. Regulatory Liaison: Act as the primary point of contact for regulatory bodies, clients, and suppliers regarding certifications. Safety & Training: Monitor COSHH, PUWER, and LOLER requirements while delivering QHSE training to staff. What We Need From You Industry Experience: A proven track record in QHSE or Compliance within vehicle bodybuilding, automotive, or heavy engineering industries. Technical Knowledge: Strong awareness of Type Approval (IVA/VCA) and industry build standards. Communication: The ability to confidently liaise with internal teams and external regulatory bodies. Proactive Approach: A "safety-first" mindset with strong problem-solving skills and the ability to lead by example. Benefits for You Health & Wellness: Employee Assistance Programme (including 24hr Online GP access). Security: Death in Service benefit and auto-enrolment pension. Work-Life Balance: 20 days annual leave (plus bank holidays) and your Birthday off! Growth: Real opportunities for professional training and development. To apply or discuss this role in more detail, please contact Alfie on (phone number removed) quoting job number (phone number removed). At Platinum we recruit for specialist engineering roles across vital industries: HGV, Automotive, Plant, Waste & Recycling, Agriculture, Generators, and Cranes & Lifting . If your background isn't directly in this sector or, if this role isn't right for you, your technical skills are likely transferable so we still encourage you to get in touch; (url removed) (phone number removed). Platinum Recruitment is acting as an Employment Agency in relation to this vacancy.

Role: Stores Person Location: Cheltenham Day Shift 07:45 - 16:45 Mon Thurs, 07:45 - 12:30 Fri Salary: £26,557.44 Benefits: 27 paid days holiday, Staff canteen, Free Parking, Free tea & Coffee This market leading engineering company are recruiting for a Stores Person to join their site in Cheltenham. The company manufacture and supply a range of specialist products to various industries across the globe. Your role will be to carry out all operational tasks associated with a busy logistics operation around goods receipt, put away, picking, packing, loading, despatching, stock counting and discrepancy investigation. Responsibilities: Excellent working knowledge and ability to carry out all key tasks across the full Logistics operation as and when required including Goods Receiving Bay (GRB), Stores and Distribution Centre (DC) Develop and foster cross functional key relationships with wider logistics and business teams to deliver excellent customer service Ensures customer orders are processed to meet strict production and delivery targets Use MRP system and operate computerised databases to ensure that all transactions are accurate and completed within the required timescales Perform routine daily duties for the collection and correct disposal of recycling and general waste streams as required Operate all material handling equipment (MHE) across all areas of the logistics department Engage, suggest and contribute to continuous improvement initiatives and projects, as required Requirements: Previous Sores / Logistics / Warehouse experience Forklift licence would be beneficial, but training will be provided If this role might be of an interest, please contact Marta Kosno (phone number removed) and forward your CV to (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

Senior Structural Engineer - Northern Ireland An industry-leading civil engineering and construction contractor is seeking a Senior Structural Engineer to join their expanding Northern Ireland team. This is a rare opportunity to contribute to some of the UK and Ireland's most technically demanding and high-profile infrastructure projects, working across sectors including aviation, defence, nuclear, rail, highways, and energy. This organisation is renowned for delivering complex, multi-disciplinary projects through a collaborative and engineering-led approach. With a strong reputation for innovation, quality, and safety, they provide an environment where talented engineers can thrive-supported by industry-leading resources, modern facilities, and a culture that values professional development and career progression. Key Responsibilities Undertake structural analysis and design for both permanent and temporary works (predominantly permanent). Deliver innovative and practical engineering solutions in line with relevant codes, standards, and project requirements. Collaborate closely with multidisciplinary design and construction teams, ensuring seamless integration between design intent and on-site execution. Conduct site visits and technical assessments, providing expert support to project delivery teams. Prepare design calculations, technical reports, and detailed drawings to a high standard. Ensure all designs comply with health, safety, and environmental regulations. Liaise effectively with clients, contractors, and key stakeholders to meet project goals and expectations. Key Requirements Degree in Civil or Structural Engineering (or equivalent). Chartered or working towards chartership with ICE or IStructE. Strong knowledge of structural analysis and design software, with a solid grasp of Eurocodes and British Standards. Proven experience in steel structures-including design, fabrication, and erection of structural steelwork. Comprehensive understanding of steel connections, welding techniques, and material properties. Experience in temporary works design (e.g., propping, bracing, lifting) is advantageous. Excellent problem-solving, communication, and report-writing skills. Ability to work effectively independently and as part of a collaborative team. Why Join? This is an exciting opportunity for a driven structural engineer to take on technically challenging and career-defining projects within a progressive and forward-thinking company. You'll be part of a team that values engineering excellence, invests in its people, and delivers projects that shape the built environment across the UK and Ireland. A competitive salary and comprehensive benefits package are on offer, along with genuine opportunities for professional growth and chartership support. Apply now if you feel this could be a good next step! Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

We are working with a leading pump rental and solutions business delivering engineered installations into construction, clean water, and wastewater environments. They are seeking an Installation Supervisor to lead pump and pipework installations across client sites in Bedford and surrounding areas. This role is responsible for safe, compliant, and high quality project delivery on site. Responsibilities Supervise pump and pipework installations from project mobilisation through to completion in line with agreed scope and standards. Lead and work alongside an Installation Operative, overseeing daily site activity and subcontractors where required. Brief and enforce RAMS on site, ensuring all risks are identified and controlled before and during installation. Maintain full responsibility for health and safety, stopping any unsafe activity where standards are not met. Liaise with the Installation Manager and internal teams to provide accurate progress updates and flag potential issues. Ensure equipment is fit for purpose prior to installation and meets required quality standards. Support vehicle loading and unloading and undertake physically demanding site tasks as required. Participate in the on call rota and support overtime requirements to maintain service delivery. Skills and Experience Experience supervising installations within construction, wastewater, or clean water environments. Confident working at height, in confined spaces, and around sewage or wastewater operations. Hands on installation capability with the ability to lead from the front on site. NVQ Level 3 or equivalent in Site Supervision. SSSTS qualification. Full UK driving licence with no more than six points. Flexibility to work away from home and participate in a one in four on call rota. IOSH Managing Safely, Forklift licence, CSCS card, and National Water Hygiene Card desirable. Able to pass a safety critical medical. Summary Position: Installation Supervisor Location: Bedford Duration: Permanent Salary: 40,000 to 45,000 including overtime and on call plus benefits Start: Notice Dependent If you are a site experienced supervisor who leads by example and takes ownership of safe, compliant installation delivery, we would like to hear from you. Apply now or contact the Kiota team for more details.

Job Title: Technical Support Location: Royston World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As a Technical Support, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. The role: As a Technical Support, you will help drive our goals by: Actively promote and uphold a positive Health & Safety culture, ensuring strict adherence to Johnson Matthey policies and standards, with a commitment to cultivating a safe working environment focused on zero harm Perform relevant risk assessments (COSHH, manual handling) for developmental and live production activities Contribute actively to the Quality Management System by diligently updating procedures and batch record sheets Support production teams by applying best practices and leveraging in-depth knowledge of chemistry within Production Operations Key skills that will help you succeed in this role: Degree qualification in Chemistry, Chemical Engineering or related subject, or NVQ Level 4 or above, or substantial relevant working experience Knowledge and understanding of chemical process operator skills Understanding of LEAN manufacturing methodology, including problem solving tools such as root cause analysis (highly desirable) Chemical awareness / COSHH, good understanding of Hazardous signage and Chemical Reaction Hazards The work environment is mainly shop-floor based and will need to frequently visit all production areas. Due to the nature of this role applicants must be non-smokers and have been free from nicotine products for at least 3 months. You must occasionally lift and/or move up to 25kg. You will be required to work Monday-Friday, 08:15-16:30. What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.

Job Description Lift Engineer - Day Jobs in Bristol at Stannah - Join Our Team! Are you a qualified Lift Engineer looking for a Lift Engineer job at a market-leading family-run business? Stannah, a global leader in the lift industry, is looking to recruit qualified Lift Engineers. This job covers key stations across Bristol and surrounding areas Working hours: Monday to Thursday: 7:30-16:45 , Friday: 7:30-15:45 Why Join Stannah: Industry Leadership: Stannah is a trusted name in the lift industry, known for innovation, safety, and commitment to quality. Competitive Compensation: In addition to a market-aligned base salary, you'll receive a standby allowance and call-out payment. Comprehensive Bene fits : Enjoy benefits such as a profit share bonus scheme, life assurance, matched contribution/salary sacrifice pension, Discount Rewards Scheme, and a Simply Health Cash Plan to help cover your health expenses. Generous Holiday Entitlement Career Growth: We offer opportunities for career advancement, ongoing training, and development. Autonomy : You'll manage on site works, building relationships with client staff and key stakeholders as the face of Stannah. Lift Engineer Responsibilities: Conduct maintenance, repair, and call-out visits on various types of lifts and stairlifts Ensure high-quality service and safety standards. Perform effective risk assessments and maintain site log cards. Participate in our on-call rota, receiving additional standby allowance and call-out payment on top of a competitive base salary. Please see the full job description here: Lift Engineer job description Qualifications Lift Engineer Requirements: An NVQ level 3 in Lift Engineering or equivalent. Proven experience as a Lift Engineer. A valid UK driving licence. Additional Information If you have a comprehensive Lift engineering background, including an NVQ 3 in Lift Engineering or equivalent - we want to hear from you! If you are looking for a Lift Engineer Job Bristol, click the "Apply Now" button to send your CV or contact us for further information. Benefits Include: Market Aligned Salary, paid on a monthly basis Profit Share Bonus Scheme, paid to all employees every quarter. Based on Group Company profits 25 days holiday, plus bank holidays Holiday scheme to buy extra days' annual leave Pension Scheme. Matched contribution/salary sacrifice SimplyHealth Cash Plan. Allows you to claim towards health costs. For example, dental, optical, physiotherapy, chiropody treatments and more Life Assurance Scheme Long Service award scheme, with holiday benefit Company Benefits Discount Rewards Scheme. Includes shop discounts, hotel discounts, days out, and more Employee Assistance Programme. A workplace initiative to support and enhance well-being Enhanced maternity and paternity provision Company Vehicle Stannah Group is an equal opportunities employer. We welcome and encourage applications from candidates of all backgrounds, identities, and abilities. We are a Disability Confident Committed Employer. We treat all our job applicants fairly and with respect. Our employees are the heart of our business. We take great care to create a working environment where everyone feels valued. Join our team and be a part of our diverse and inclusive community! We reserve the right to close this vacancy early if we receive high numbers of applications for the role. Appropriate right to work must be held by applicants. Sponsorship is not available. PandoLogic.

Laser Machine Setter & Operator Manufacturing We are currently seeking an experienced Laser Machine Setter & Operator to join one of our clents. This is an excellent opportunity for a skilled operator with a strong background in CNC laser cutting, machine setup, and production efficiency. Key Responsibilities Set up, adjust, and operate CNC laser cutting machines to meet production requirements Interpret engineering drawings, technical specifications, and job sheets Perform routine maintenance and troubleshooting on laser equipment Ensure accurate material selection and machine calibration Monitor production output and maintain high-quality standards Conduct first-off inspections and in-process quality checks Maintain a safe, clean, and organised working environment Work collaboratively with production and engineering teams to meet deadlines Requirements Proven experience as a Laser Machine Operator / Setter in a manufacturing environment Strong understanding of CNC laser cutting processes (e.g., Trumpf, Bystronic, Amada or similar) Ability to read and interpret technical drawings Experience with sheet metal fabrication preferred Good attention to detail and problem-solving skills Ability to work independently and as part of a team Flexible approach to shifts and overtime when required Desirable Skills Knowledge of CAD/CAM software Forklift or crane licence (advantageous) Experience with different materials such as stainless steel, aluminium, and mild steel What We Offer Competitive salary with overtime opportunities Training and career development Modern, well-equipped manufacturing facility Supportive team environment Apply Now If you are a skilled Laser Machine Setter & Operator looking to advance your career within a dynamic manufacturing company, we want to hear from you. Apply today with your CV or contact us for more information.

Manufacturing Assembly & Wirebonding Operator x3 Role Purpose The Manufacturing Assembly & Wirebonding Operator will be responsible for the assembly, wire bonding, inspection, and process control of electronic or semiconductor devices to ensure products meet quality, reliability, and performance requirements in a manufacturing environment. Key Responsibilities Assembly Assemble parts and subassemblies using hand tools, fixtures, and equipment Follow work instructions, drawings, and standard operating procedures Meet production targets while maintaining quality standards Inspect assembled products for defects and ensure conformance to specifications Report quality issues, equipment problems, or material shortages Maintain a clean and organised work area (5S) Follow all safety policies and procedures Complete required production and quality documentation Support continuous improvement initiatives Wire Bonding Perform wire bonding operations (ball bond, wedge bond, or ribbon bond) using gold & palladium wire Set up and operate wire bond machines (manual or automatic) Optimise bonding parameters (force, power, time, loop height) Conduct bond pull, shear, and visual inspections Identify and troubleshoot wire bond defects (NSOP, lifted bonds, heel cracks, shorts) Qualifications & Experience Prior Wirebonding, Manufacturing and Assembly experience is essential Ability to read basic drawings and work instructions Experience using hand tools and precision assembly equipment Skills & Competencies Attention to detail and quality focus Manual dexterity and hand-eye coordination, with ability to manipulate extremely small parts with consistent accuracy Ability to work in a team environment Time management and reliability Work Environment & Physical Requirements Manufacturing / Production working environment (Cleanroom & Temperature and Humidity Controlled) Ability to stand or sit for extended periods Repetitive motion and fine motor tasks may be required Manufacturing Assembly Operator - Roles & Responsibilities Assembly & Production Assemble components, subassemblies, and finished products according to work instructions and drawings Use hand tools, power tools, fixtures, and assembly equipment safely and correctly Meet production targets while maintaining quality standards Quality Control Inspect parts and assemblies to ensure they meet specifications Identify, report, and help correct defects or non-conformances Follow quality procedures and documentation requirements Safety & Compliance Follow all safety rules, procedures, and PPE requirements Handle ESD-Sensitive Devices following company ESD control procedures Maintain a safe, clean, and organised workstation (5S) Report safety hazards, incidents, or near misses Documentation & Reporting Complete production records and maintain process checklists accurately Track quantities produced, scrap, and rework Communicate issues related to materials, equipment, or processes Ability to consult / Liaise with Engineering Teams on task requirements This role requires you to complete a Trades Test before we can submit your CV to the client. Only apply if you are willing to attend our Whiteley site to undertake this assessment.

JG270 - Resident Forklift Engineer Location: Leicester Salary: £30,000 - £35,000 Overview: First Military Recruitment are currently seeking a Forklift Engineer on behalf of one of our clients.The successful candidate will be responsible for carrying out routine maintenance and repairs to long/short term machines and customers owned equipment. Ensuring best practice with quality and professionalism are met at all times and to maintain customer satisfaction.Our client strongly encourages applications from ex-military personnel however, all candidates will be considered. Duties and Responsibilities: Servicing and repair of forklift trucks and other lifting equipment. Carrying out routine maintenance. Checking oil and fuel levels. Checking all related hoses and connections. Steering and brake checks. Basic electrical checks - brake lights etc. Liaising with customers regarding their individual requirements. Submit accurate parts requisition information to Head Office. Acting as the face of the company and therefore acting as a brand ambassador. Skills and Qualifications: A good mechanical engineering background is essential. Customer focused. Ability to work as part of a team or on an individual basis where required. Excellent time management skills Excellent communication skills - both verbal and written. Experience with forklift trucks, military, agricultural or plant equipment is highly desirable. Full UK driving licence. Location: Leicester Salary: £30,000 - £35,000

Job Title - Field Service Engineer Location - Falkirk Salary: £36,000 - £38,000 Shift: Monday to Friday - 40 Hour Working Week Job Role: I am currently partnering with a market leading materials handling business that are currently looking to recruit an experienced field service engineer to service and maintain Forklift Trucks and other MHE equipment across customer sites. As a Field Service Engineer, you'll cover your local patch carrying out diagnostics, repairs, and servicing of FLT and material handling equipment. You'll have the freedom to plan your own day while enjoying the backing of a strong technical team and ongoing manufacturer training. Sector - Field Service Maintenance Non-Negotiable Requirements of Field Service Engineer: Must have hands on Servicing or Maintenance Experience Essential requirements of Field Service Engineer: Maintenance experience of Forklift Trucks, Plant Machinery, Agricultural Equipment, HGV S, Passenger Vehicles or similar machinery. Have hands-on experience in the following disciplines: Electrical, Mechanical and Hydraulics. Recognised Engineering Qualification. Full UK Driving License Desirable Requirements of Field Service Engineer: Previously have worked as a Field Service Engineer. Minimum Level 3 Qualification in Engineering. The Field Service Engineer will benefit from: Full Training and Induction Scheme Company van & fuel card. Regular overtime available with Door to Door pay. Company Pension Scheme Tools provided If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Andrew McFarlane at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

Depot Engineer - Generators Bristol £35,000 - £40,000 + Training + Progression Are you looking for a Depot based role offering training, progression and day to day variety? The company are a market leading industrial equipment rental company and operate a nationwide operation renting out equipment to construction, leisure, manufacturing and industrial customers. The role involves servicing and repairing a range of generators from multiple brands as part of a team. The generators range from portable up to large lorry mounted generators used at festivals and temporary industrial sites but you will be mostly working on the larger equipment. This is primarily depot based but there will be occasional visits to customer sites for the odd local field job with another engineer. Here is a great chance to join a market leading company, who are expanding their operation and can offer a structured career path and further development. The Role: Depot Engineer Repair and Service of Generators Monday to Friday Days Candidate Requirements: Experience of either generators or large diesel engines A relevant qualification in any of Mechanical, Electrical, Plant, Diesel or similar Full Driving License Consultant: Sebastian Petitti Elix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Generator Engineer, Workshop engineer, depot engineer, mechanical engineer, diesel, diesel fitter, diesel engines, hgv, electrical, hnd, nvq, hnc, forklift, kva, generators, power generation, Bristol, bath, yate, avon

Field Service Engineer - GeneratorsBerkshire / West London£35,000 - £50,000 + Overtime (OTE 50k) + Van + Training + BenefitsAre you looking for a local Field Service Engineer role offering plenty of Overtime, day to day variety, door to door and a local patch?The company are a market leading industrial equipment rental company and operate a nationwide operation renting out equipment to construction, leisure, manufacturing and industrial customers.The role involves servicing and repairing a range of generators from multiple brands as part of a team. The generators range from portable up to large lorry mounted generators used at festivals, construction sites and temporary industrial locations. The Patch is around the Berkshire, West London and the surrounding counties.Here is a great chance to join a market leading company, who are expanding their operation and can offer regular overtime and manufacturers training courses.The Role: Field Service Engineer Repair and Service of Generators 40 hour weeks but overtime can range from time and a half to double time dependent on days worked - Typical based hours on a rota would be 4 days in the week and 1 on the weekendCandidate Requirements: Generator experience - Cummins, Perkins, FG Wilson etc A relevant qualification in any of Mechanical, Electrical, Plant, Diesel or similar Full Driving LicenseConsultant: Sebastian PetittiElix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment.Generator Engineer, Field Service engineer, depot engineer, mechanical engineer, diesel, diesel fitter, diesel engines, hgv, electrical, perkins, cummins, fg Wilson, hnd, nvq, hnc, forklift, kva, generators, power generation, Uxbridge, Slouth, Windsor, hayes, Berkshire, West London, M25

SailPoint Engineer - 6/12 Month Contract - Inside IR35 - Hybrid My customer is seeking a IdAM Engineer to play a pivotal role within the cyber team to uplift a ongoing project to build on it's Authentication and Authorisation, Privileged Identity Management, and Identity and Governance and Administration services. You will bring strong experience in SailPoint Identity Security Cloud and integrating SailPoint into HR systems, Active Directory, Entra ID, and other enterprise platforms. Key Skills required from the SailPoint Engineer: Delivered identity and access management solutions within a cyber security team, focusing on authentication, authorisation, and privileged access. Configured and enhanced SailPoint Identity Security Cloud (ISC) across multiple environments. Integrated SailPoint with enterprise systems including HR platforms, Active Directory, and Entra ID . Implemented core identity governance capabilities: Joiner/Mover/Leaver (JML), certifications, RBAC, policy enforcement, and least-privilege access. Onboarded applications using standard connectors and supported system integrations. Designed and implemented SSO, MFA, and identity life cycle management solutions. Supported Just-In-Time (JIT) and Just-Enough-Access (JEA) access models. Produced and maintained technical documentation; resolved complex IdAM issues. Contributed to identity governance maturity improvements and life cycle process optimisation. Supported compliance initiatives, risk remediation, and access control enhancements. Maintained operational stability and drove continuous improvement of the identity platform. Please note that you will require DBS checks to proceed with this role. The SailPoint Engineer is required onsite, 2/3 days per week in Manchester. Apply now to speak with VIQU IT in confidence. Or reach out to Louise Davies via the VIQU IT website.

Mobile Plant Fitter £43853 per Year Permanent Location: Telford Recycling About The Role At AO Recycling, we are committed to extracting as much value as possible from the waste electrical and electronic equipment (WEEE) that is thrown away by UK households every year. We are growing rapidly and so with that, opportunities to develop and try new approaches become aplenty. If you are an energetic, hands on, innovative and professional, this is the environment for you. Our fridge recycling plant is one the most efficient and advanced in the UK and It sets a new standard in recovering metals, plastics, and gases. We use cross flow shredders to dismantle fridges, whilst safely extracting and treating the flammable gasses and CFCs through our cryo-condap solvent recovery plant. Ferrous and non-ferrous metals are recovered as well as plastics, and polyurethane foam. The whole process is fully automated and done using a series of screens, magnetic separators, and air classifiers. The plant produces high quality recycled products and complies with the highest European environmental standards. An exciting opportunity has arisen for a Mobile Plant Fitter that predominately carries out repairs and maintenance to our fleet of 36 forklift trucks in Telford. This role also provides welding and fabrication services, and general maintenance to an array of waste recycling machines. The successful candidate will work on a 4 on 4 off shift pattern on days and nights . Here's What You Can Expect To Be Doing No two days are ever the same at AO Recycling, but here's a taste of what you'll get up to: Carry out repair and maintenance on mobile plant and site infrastructure, as planned or directed by site management, including mechanical engineering, fabrication, and welding tasks Plan and deliver corrective and reactive work, making sure tools, parts and materials are available, minimising production downtime, upholding the highest safety standards, and maintaining tidy work areas through a 'clean as you go' approach at all times Ensure the equipment used to undertake welding, fabrication or other service work is in good working order and serviced as required. Must have a solid understanding of all hot work activities and welding accessories Ensure that all plant and equipment on site is modified and improved, as necessary, to maximise equipment availability and performance whilst still achieving output levels required to meet production demands. Complete dynamic risk assessments where necessary to ensure that safe working practices are upheld, and risk reduced Be aware of stock control and maintain shift paperwork to the highest standard, to complete condition reports and other documentation as defined by the maintenance strategy Assess malfunctioning equipment and provide advice to the site management team to support and influence decision-making Carry out engineering project work and assist with new installations or refurbishments to ensure high-quality, reliable operational performance Update and administer the Computerised Maintenance Management System (CMMS) while completing Planned Maintenance inspections in line with the site maintenance plan, ensuring all work is carried out safely and effectively. Contribute to problem solving workshops, providing engineering expertise to identify root causes of failures and subsequent improvement actions Attend daily operational review meetings, providing updates on Planned Maintenance compliance, live defects, and ongoing improvement plans Complete dynamic risk assessments and adopt a 'clean-as-you-go' approach to keep our plant super safe A Few Things About You Experienced and qualified engineer with mobile plant repairs, welding, fabrication, mechanical bias. Ability to provide solutions to real time problems from concept, build to installation. High attention to detail with high standards of work. Excellent communicator, both written and verbal. Highly organised and able to plan and prioritise workloads. Understanding of safe systems of work. I.e., Plant isolations and safety systems Computer literate and familiar with Microsoft office systems. Knowledge of CMMS systems. Driven and self-motivated. Good communicator. Ability to work on own initiative or part of a team. Our Benefits Our benefits are designed to cover the moments that matter to AOers. From health and wellness to giving back - you'll be rewarded inside and outside of work. Holidays; 21 days holiday (inclusive of bank holidays) Pension; Contribute 5% of your annual salary and we'll do the same, giving you a little extra support for the future. Be a VIP at the AO Arena; we have loads of opportunities to win free tickets and pre-sale access! Health & wellbeing; discounted gym membership, and our scheme giving you access to virtual GP's, Mental Health support and much more. Discounts; exclusive discounts across our product range. Family leave; Enhanced Maternity, Paternity and Adoption leave. Making a difference; 2 fully paid days a year to donate your time to any charity of your choice. Free Food Thursday - Last Thursday of every month, lunch is on us as a way of saying thank you for your efforts! To see all our benefits and perks, visit our AO Benefits page.

Building Services Technician Location - Nottingham SSC Permanent Contract - 40 hours per week, Working predominantly Mon-Fri 07:30-16:00 however flexibility is of the utmost importance. Recruitment Partner - Vyoma Gandhi What you'll be doing To provide a full planned preventative maintenance, breakdown and repair function to all logistics warehousing facilities. Key responsibilities You will be directly accountable for ensuring all facilities achieve availability expectations. To use expertise, experience and professionalism to make strong well-informed decisions to prioritise tasks, trying your best to ensure customer requirements are satisfied. You will work within the Engineering team and work collaboratively with the Engineering Management and operations. Work will be within the guidelines and constraints of all company, legislative and safety criteria Ensuring all Preventive Maintenance, Inspections & Versatile work orders are completed within deadlines, ensuring world class standards in the warehouse. What you'll need to have (our must-haves) Ability to promote innovation across all working areas Effective communication skills Highly motivated with the ability to motivate others A wealth of experience in a similar building services engineering field Time served apprentice or a minimum of 5 years' experience in a similar role with a minimum Level 3 qualification in a relevant electrical engineering discipline It would be great if you also have Stakeholder Management Skills Rewards designed for you Boots Retirement Savings Plan Discretionary annual bonus Generous employee discounts Enhanced maternity/paternity/adoption leave pay and gift card for anyone expecting or adopting a child Flexible benefits scheme including option to buy additional holiday, discounted gym membership, life assurance, activity passes and much more. Access to free, 24/7 counselling and support through TELUS Health, our Employee Assistance Programme. There's lots more in our benefits and discounts, MyBoosts - there to give you that little lift in your everyday. Find out more at boots.jobs/rewards. Exclusions may apply; eligible roles only. Please note that any salary estimates provided on third-party sites are not endorsed by Boots and may not be accurate. A bit about us At Boots, we're proud to be an equal opportunity employer, creating a place where everyone feels welcome, supported and free to be themselves. We believe that when our people feel valued and included, they thrive, so we're committed to creating a brilliant Boots for our people so they can make a difference for our customers and colleagues every time. What's next If you apply, our team will be in touch to let you know the outcome of your application or to arrange next steps. Where a role is advertised as full-time, we are open to discussing part-time and job share options during the application process. If you require additional support as part of the application and interview process, we are happy to provide reasonable adjustments to help you to be at your best. Boots is a Ban the Box employer and will consider the suitability of applicants with criminal convictions on a case-by-case basis. We hope to hear from you soon. Be brilliant with Boots.

Shift Pattern: Monday till Friday, 17:00 - 00:30am Pay Rate: £15.35 per hour Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Our Warrington site is also known as the Italian centre of excellence, recent expansion and investment make this site a state-of-the-art manufacturing unit! We produce high quality Italian ready meals for both Tesco & Co-Op What you'll be doing: Working within an exciting and fast paced environment, you will be a key member of our warehouse team and will ensure the service we provide to our customer is of exceptional quality. The role can be physically demanding with a good amount of pushing, pulling and lifting involved. Task will involve: Deliver line/area productivity and efficiently targets, resolving problems and issues as they arise, produce ingredients or goods in line with the agreed production plan. Continuously monitor raw materials/ingredients, all operational processes and the overall production environment to ensure that all activity comply with food safety manufacturing standards Monitor the effectiveness of machinery and equipment, through Optimum Equipment Efficiency (OEE), highlighting trends and issues to ensure asset performance is consist of and reliable Promote a good health, safety and environmental culture within the department that complies with procedures, corrective actions and completes near miss reporting, to promote a safe working environment. First line maintenance and basic Plan Preventative Maintenance (PPM) Strip downs and rebuild of manufacturing equipment Provide training of operational staff Assist engineers with break downs Basic fault finding and prevention of breakdowns What we're looking for Full training will be provided if successful in this role but are looking for the following knowledge and experience: Good level of English & Maths Mechanical literate Previous experience of working within a similar role Attention to detail Basic understanding of Health & Safety and Food Hygiene Ability to work unsupervised Right first-time approach Computer literate At Greencore we put our people at the core. We celebrate their differences and help everyone to be themselves at work. Together we make everyday taste better. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Pension up to 8% matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Free car parking Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career. Please note due to high numbers of applications this role maybe closed before the posted closing date.