HV Control Engineer required for a major Offshore Wind Farm Developer based in Poland. Responsibilities In real-time on knowledge on ongoing work and the priorities of each job. Manage the power distributions of the OWF. Monitor and Operate the OWF. Manage OWF trough SCADA and other information systems. Provide rapid restoration in case of faulty situations. Maintain an overview of the network security and availability. Ensure adherence to project Safety Rules. Create safe Processes for 1st energizations. Create switching schedules for 1st energizations. Issue/approve switching schedules. Take responsibility as Person in Control of the electrical Installation during work. Monitor, approve, issue PtW. Safely operate the plant under Electrical Safety Rules alongside other procedures. Create switching schedules for the creation of a safe workplace for all work on the electrical system. Issue/approve switching schedules. Perform Switching Tasks. Contribute to the design stage ensuring needs of operator are considered. Familiarize with the electrical system by participating in FAT/SAT testing as required. Contribute to the development of the Client ESR. Act as ambassador for Client ESR promoting safety culture within the team. Uphold the Client Electrical Safey Rules and other Electrical Safety Procedures. Perform remote switching operations as required. Authorize the de/re-activation of parts of the electrical installation. Plan and prepare electrical works on the electrical installation as delegated by the PREI. Communicate all outages and activities affecting the HV system to PREI. Communicate and coordinate directly with all AP/SAPs who are carrying out works at the system. Safeguard the system and hence, individuals in the event of any abnormal occurrence, communicate with PREI and ensure actions are taken to correct the abnormality. Initiate site-specific emergency response procedures and warn of any abnormal conditions/system changes that could affect personnel working at the system. Authorize issuing and acknowledge cancellation of any electrical site-specific documentation, Maintain a written record of all switching operations, removal of safety precautions and document management, Review electrical works requests, RAMS and access all electrical risks and work the ePTW Process, Operate Scada, record of equipment status and maintain a log of all operational activities on the system. Ensure that at change of shift, the CE taking over has been fully briefed and understood the operating conditions of the system. Monitoring the Windfarm SCADA systems and responding to alarms. Training O&M staff to take over the control of the operations. Liaise with the TSO to implement boundary co-ordination and safety precautions. Requirements Experienced in HV commissioning, Operations under electrical safety rules, Safety documentation, switching schedules, Electrical regulations/ Fluency in English is mandatory. Fluency in Polish is desirable. Full and valid GWOs.
Mar 21, 2026
Contractor
HV Control Engineer required for a major Offshore Wind Farm Developer based in Poland. Responsibilities In real-time on knowledge on ongoing work and the priorities of each job. Manage the power distributions of the OWF. Monitor and Operate the OWF. Manage OWF trough SCADA and other information systems. Provide rapid restoration in case of faulty situations. Maintain an overview of the network security and availability. Ensure adherence to project Safety Rules. Create safe Processes for 1st energizations. Create switching schedules for 1st energizations. Issue/approve switching schedules. Take responsibility as Person in Control of the electrical Installation during work. Monitor, approve, issue PtW. Safely operate the plant under Electrical Safety Rules alongside other procedures. Create switching schedules for the creation of a safe workplace for all work on the electrical system. Issue/approve switching schedules. Perform Switching Tasks. Contribute to the design stage ensuring needs of operator are considered. Familiarize with the electrical system by participating in FAT/SAT testing as required. Contribute to the development of the Client ESR. Act as ambassador for Client ESR promoting safety culture within the team. Uphold the Client Electrical Safey Rules and other Electrical Safety Procedures. Perform remote switching operations as required. Authorize the de/re-activation of parts of the electrical installation. Plan and prepare electrical works on the electrical installation as delegated by the PREI. Communicate all outages and activities affecting the HV system to PREI. Communicate and coordinate directly with all AP/SAPs who are carrying out works at the system. Safeguard the system and hence, individuals in the event of any abnormal occurrence, communicate with PREI and ensure actions are taken to correct the abnormality. Initiate site-specific emergency response procedures and warn of any abnormal conditions/system changes that could affect personnel working at the system. Authorize issuing and acknowledge cancellation of any electrical site-specific documentation, Maintain a written record of all switching operations, removal of safety precautions and document management, Review electrical works requests, RAMS and access all electrical risks and work the ePTW Process, Operate Scada, record of equipment status and maintain a log of all operational activities on the system. Ensure that at change of shift, the CE taking over has been fully briefed and understood the operating conditions of the system. Monitoring the Windfarm SCADA systems and responding to alarms. Training O&M staff to take over the control of the operations. Liaise with the TSO to implement boundary co-ordination and safety precautions. Requirements Experienced in HV commissioning, Operations under electrical safety rules, Safety documentation, switching schedules, Electrical regulations/ Fluency in English is mandatory. Fluency in Polish is desirable. Full and valid GWOs.
Senior EC&I Engineer, COR7345B As an experienced Senior EC&I Engineer (Electrical, Control & Instrumentation), you'll leverage your expertise in electrical engineering to work with both internal and external engineering staff to produce electrical system designs for a variety of projects for external clients, including positioning controls for remote handling systems, machinery controls, safety cir click apply for full job details
Mar 21, 2026
Full time
Senior EC&I Engineer, COR7345B As an experienced Senior EC&I Engineer (Electrical, Control & Instrumentation), you'll leverage your expertise in electrical engineering to work with both internal and external engineering staff to produce electrical system designs for a variety of projects for external clients, including positioning controls for remote handling systems, machinery controls, safety cir click apply for full job details
Supplier Quality Engineer - Defence A Supplier Quality Engineer is needed for an established privately owned UK supplier of engineering solutions for the defence sector. They specialise in the design, manufacture and support of control systems, and power systems for defence platforms within the safety critical and harsh environment domain, particularly for marine applications. The Supplier Quality Engineer will a self-starter and prepared to take complete ownership of all aspects of supplier quality. The Supplier Quality Engineer will have Quality Assurance experience in the defence, aerospace or automotive manufacturing industry or experience within a similar engineering environment. The Supplier Quality Engineer will be supporting the project teams by ensuring that key suppliers deliver critical parts on time, in full and to the required quality. Key Duties Communicate and ensure suppliers understand, acknowledge, and adhere to contract specific requirements. Monitor supplier s performance, recording and analysing performance data. Ensure suppliers abide by flowed down requirements and similarly flow these down into their supply chain. Other tasks may include, internal audits, quality investigations and raising non-conformances. Utilise 5-why or 8D investigations, creating reports or necessary quality related documents. Help with general and quality related improvements across the business, supporting our production/test departments. Ensure that key suppliers deliver critical parts on time, in full and to the required quality. Monitoring progress of orders and manage suppliers to ensure these are scheduled to ensure on time delivery. Identify and mitigate supply chain risks minimising delays to bring supplier production back on schedule. Monitor and ensure adherence to agreed processes, procedures, and controls. Undertake gate inspections, process witnessing and first article inspections (FAI). Carry out new supplier assessments, quality audits and maintaining supplier accreditation records. Develop supplier KPIs and metrics to monitor supplier performance, quality, and drive improvements. Undertake failure analysis, conducting root cause analysis (RCA) using tools such as 5 why, 8D and Ishikawa. Support the QM across a range of quality, health and safety and environmental matters. Assist with improvement of internal inspection processes for supplier goods. Identify weaknesses in systems and processes and proposing improvements. Key Skills/Experience Required Quality assurance experience in a defence, aerospace, or automotive manufacturing or from a similar environment. Knowledge of ISO9001 / AS9100 Rev D and Supplier auditor / internal auditor training would be an advantage. Experience with Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP). Experience and familiarity with machining and manufacturing practices and Experience with PFMEA is an advantage. Familiarity with both destructive and non-destructive inspection techniques Knowledge of Lean methodologies, 5S, Six Sigma etc and ideally a recognised qualification in quality management. A Degree or HND in an Engineering discipline or Quality Management. Good attention to detail, methodical and analytical with excellent communication skills. Expert user of Microsoft Office Suite and ability to compile and analyse data and create high quality reports. Good practical skills, ideally from low volume electro-mechanical production. Ability to interpret engineering and electrical drawings and geometric dimensioning and tolerancing GT&D. Knowledge of defence and technical standards and requirements. Ability to propose viable technical and production solutions. Demonstrated ability to make decisions and set own priorities in a dynamic business environment. A self-starter with effective time management skills and ability to work with high level of autonomy. Excellent problem-solving skills with the ability to analyse defects and implement long-term quality improvements. Ability to take initiative, by being creative and developing improvement ideas. Candidates must be British Nationals as full UK Security Clearance (SC) may be required, and this is due to the nature of the Defence products involved Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Mar 21, 2026
Full time
Supplier Quality Engineer - Defence A Supplier Quality Engineer is needed for an established privately owned UK supplier of engineering solutions for the defence sector. They specialise in the design, manufacture and support of control systems, and power systems for defence platforms within the safety critical and harsh environment domain, particularly for marine applications. The Supplier Quality Engineer will a self-starter and prepared to take complete ownership of all aspects of supplier quality. The Supplier Quality Engineer will have Quality Assurance experience in the defence, aerospace or automotive manufacturing industry or experience within a similar engineering environment. The Supplier Quality Engineer will be supporting the project teams by ensuring that key suppliers deliver critical parts on time, in full and to the required quality. Key Duties Communicate and ensure suppliers understand, acknowledge, and adhere to contract specific requirements. Monitor supplier s performance, recording and analysing performance data. Ensure suppliers abide by flowed down requirements and similarly flow these down into their supply chain. Other tasks may include, internal audits, quality investigations and raising non-conformances. Utilise 5-why or 8D investigations, creating reports or necessary quality related documents. Help with general and quality related improvements across the business, supporting our production/test departments. Ensure that key suppliers deliver critical parts on time, in full and to the required quality. Monitoring progress of orders and manage suppliers to ensure these are scheduled to ensure on time delivery. Identify and mitigate supply chain risks minimising delays to bring supplier production back on schedule. Monitor and ensure adherence to agreed processes, procedures, and controls. Undertake gate inspections, process witnessing and first article inspections (FAI). Carry out new supplier assessments, quality audits and maintaining supplier accreditation records. Develop supplier KPIs and metrics to monitor supplier performance, quality, and drive improvements. Undertake failure analysis, conducting root cause analysis (RCA) using tools such as 5 why, 8D and Ishikawa. Support the QM across a range of quality, health and safety and environmental matters. Assist with improvement of internal inspection processes for supplier goods. Identify weaknesses in systems and processes and proposing improvements. Key Skills/Experience Required Quality assurance experience in a defence, aerospace, or automotive manufacturing or from a similar environment. Knowledge of ISO9001 / AS9100 Rev D and Supplier auditor / internal auditor training would be an advantage. Experience with Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP). Experience and familiarity with machining and manufacturing practices and Experience with PFMEA is an advantage. Familiarity with both destructive and non-destructive inspection techniques Knowledge of Lean methodologies, 5S, Six Sigma etc and ideally a recognised qualification in quality management. A Degree or HND in an Engineering discipline or Quality Management. Good attention to detail, methodical and analytical with excellent communication skills. Expert user of Microsoft Office Suite and ability to compile and analyse data and create high quality reports. Good practical skills, ideally from low volume electro-mechanical production. Ability to interpret engineering and electrical drawings and geometric dimensioning and tolerancing GT&D. Knowledge of defence and technical standards and requirements. Ability to propose viable technical and production solutions. Demonstrated ability to make decisions and set own priorities in a dynamic business environment. A self-starter with effective time management skills and ability to work with high level of autonomy. Excellent problem-solving skills with the ability to analyse defects and implement long-term quality improvements. Ability to take initiative, by being creative and developing improvement ideas. Candidates must be British Nationals as full UK Security Clearance (SC) may be required, and this is due to the nature of the Defence products involved Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
An opportunity is available for a Cost Controller to support a major nuclear civil engineering and infrastructure project in Whitehaven. This role is responsible for monitoring project costs, forecasting expenditure and ensuring robust financial control processes are maintained in line with programme objectives and strict regulatory requirements within a highly controlled project environment. This role would suit a detail-oriented cost professional with experience in construction, infrastructure, or engineering projects. It is ideal for someone who enjoys working with data, managing budgets, and supporting project teams with financial insights. Experience within regulated sectors such as nuclear, energy or defence would be highly advantageous. P4 Pass/Security cleared is highly desirable. Key Responsibilities Monitor project costs, budgets, and forecasts to ensure financial control is maintained. Support the preparation of cost reports, cash flow forecasts and variance analysis. Work closely with commercial and project teams to track project performance and expenditure. Maintain cost systems, ensuring accurate and timely financial data and reporting. Assist with change control, identifying cost impacts and supporting decision-making processes. The client is able to offer an attractive package for the role, including a salary ranging for 35,000- 45,000, 5060 car allowance, 8% pension contributions, private medical care and 25 days annual leave + BH. If you are a cost controller keen to work on a critical nuclear infrastructure project, click apply below. Alternatively, if you can please send an updated CV (url removed) or give me a call for a confidential chat on (phone number removed).
Mar 21, 2026
Full time
An opportunity is available for a Cost Controller to support a major nuclear civil engineering and infrastructure project in Whitehaven. This role is responsible for monitoring project costs, forecasting expenditure and ensuring robust financial control processes are maintained in line with programme objectives and strict regulatory requirements within a highly controlled project environment. This role would suit a detail-oriented cost professional with experience in construction, infrastructure, or engineering projects. It is ideal for someone who enjoys working with data, managing budgets, and supporting project teams with financial insights. Experience within regulated sectors such as nuclear, energy or defence would be highly advantageous. P4 Pass/Security cleared is highly desirable. Key Responsibilities Monitor project costs, budgets, and forecasts to ensure financial control is maintained. Support the preparation of cost reports, cash flow forecasts and variance analysis. Work closely with commercial and project teams to track project performance and expenditure. Maintain cost systems, ensuring accurate and timely financial data and reporting. Assist with change control, identifying cost impacts and supporting decision-making processes. The client is able to offer an attractive package for the role, including a salary ranging for 35,000- 45,000, 5060 car allowance, 8% pension contributions, private medical care and 25 days annual leave + BH. If you are a cost controller keen to work on a critical nuclear infrastructure project, click apply below. Alternatively, if you can please send an updated CV (url removed) or give me a call for a confidential chat on (phone number removed).
The Burford Recruitment Company Ltd
Shipston-on-stour, Warwickshire
A rare opportunity has arisen for an experienced Estate Maintenance Technician / Facilities Manager to join a well-established team on a beautiful private shooting estate in the North Cotswolds. The estate consists of a large country house, multiple estate buildings and farmland, and requires a hands-on, proactive individual to oversee day-to-day maintenance and infrastructure systems. This is a varied and rewarding role suited to someone who takes pride in their work, enjoys problem solving, and is comfortable working both independently and as part of a long-standing estate team. During the shooting season, the role may also include occasional driving duties and errands for the household, with opportunities for additional overtime hours when the property is occupied. Key Responsibilities Monitoring and maintaining estate Building Management Systems (BMS) and security systems Carrying out planned maintenance and servicing of HVAC systems, including maintaining service records Overseeing estate infrastructure including water, electrical, heating, drainage and security systems Completing routine maintenance and ad hoc repairs across estate buildings Undertaking painting, general repairs and upkeep as required Maintaining a small estate vehicle fleet, including cleaning, organising services and MOT scheduling Implementing preventative pest control measures Supporting the estate team with errands and driving duties when the property is occupied Maintaining accurate maintenance logs and records Key Skills & Experience Strong understanding of Building Management Systems (BMS) and security systems Engineering or technical background with strong practical ability Good IT skills and record keeping Experience with HVAC maintenance and estate infrastructure systems Knowledge of Health & Safety legislation Practical problem-solving mindset and strong attention to detail Ability to work independently and as part of a team Clean UK driving licence (essential) Experience working in private estates or residences beneficial but not essential Discretion, honesty and professionalism essential Apply Now This is an excellent opportunity for a skilled and dependable maintenance professional looking for a long-term role within a prestigious private estate environment.
Mar 21, 2026
Full time
A rare opportunity has arisen for an experienced Estate Maintenance Technician / Facilities Manager to join a well-established team on a beautiful private shooting estate in the North Cotswolds. The estate consists of a large country house, multiple estate buildings and farmland, and requires a hands-on, proactive individual to oversee day-to-day maintenance and infrastructure systems. This is a varied and rewarding role suited to someone who takes pride in their work, enjoys problem solving, and is comfortable working both independently and as part of a long-standing estate team. During the shooting season, the role may also include occasional driving duties and errands for the household, with opportunities for additional overtime hours when the property is occupied. Key Responsibilities Monitoring and maintaining estate Building Management Systems (BMS) and security systems Carrying out planned maintenance and servicing of HVAC systems, including maintaining service records Overseeing estate infrastructure including water, electrical, heating, drainage and security systems Completing routine maintenance and ad hoc repairs across estate buildings Undertaking painting, general repairs and upkeep as required Maintaining a small estate vehicle fleet, including cleaning, organising services and MOT scheduling Implementing preventative pest control measures Supporting the estate team with errands and driving duties when the property is occupied Maintaining accurate maintenance logs and records Key Skills & Experience Strong understanding of Building Management Systems (BMS) and security systems Engineering or technical background with strong practical ability Good IT skills and record keeping Experience with HVAC maintenance and estate infrastructure systems Knowledge of Health & Safety legislation Practical problem-solving mindset and strong attention to detail Ability to work independently and as part of a team Clean UK driving licence (essential) Experience working in private estates or residences beneficial but not essential Discretion, honesty and professionalism essential Apply Now This is an excellent opportunity for a skilled and dependable maintenance professional looking for a long-term role within a prestigious private estate environment.
Fire and Security Engineer - East London - £32,000- £45,000 Per Annum Fire and Security Engineer Package Overview: £32,000 - £45,000 Basic Salary + Overtime (Negotiable depending on experience) Full-Time, Permanent Monday to Friday Hours Area Covered: East London & the Surrounding Areas Company Overview - Fire and Security Engineer Our Client are currently looking for a Fire and Security Engineer to join their highly valued team on a full-time, permanent basis. With many years' experience in the industry, they're entering another period of growth and are looking to expand their team due to customer demand. Fire and Security Engineer Role and Responsibilities: Installation, Service, Repair, Fault-finding & Maintenance of Fire Alarms, Intruder Alarms, CCTV & Access Control Systems Field based role, covering a number of sites Working on a range of brands of manufacturer Take responsibility for the overall quality of the work delivered Carry out effective communication with customers at all times Ensure tasks are completed efficiently Providing support to team members where required Fire and Security Engineer Skills and Experience Required : A full UK driving licence or equivalent (Essential) A drive and enthusiasm to grab hold of opportunities Ideally you will have at least 3 years' experience working within the Fire and Security Sector Considering applicants with all or single discipline providing you are willing to train Knowledge of a range of manufacturers Desirable qualifications include: IPAF, CSCS/ ECS, FIA and/or City & Guilds A positive attitude and the ability to self-motivate is a must Benefits of this Fire and Security Engineer position include: Competitive basic salary of up to £45,000 per annum (Negotiable depending on experience) Company vehicle & fuel card Plenty of overtime available if wanted Opportunity to earn more money via the on-call rota Annual leave provided Pension scheme On-going training opportunities Travel Pay DON'T MISS OUT ON THIS GREAT OPPORTUNITY - APPLY NOW Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful.
Mar 21, 2026
Full time
Fire and Security Engineer - East London - £32,000- £45,000 Per Annum Fire and Security Engineer Package Overview: £32,000 - £45,000 Basic Salary + Overtime (Negotiable depending on experience) Full-Time, Permanent Monday to Friday Hours Area Covered: East London & the Surrounding Areas Company Overview - Fire and Security Engineer Our Client are currently looking for a Fire and Security Engineer to join their highly valued team on a full-time, permanent basis. With many years' experience in the industry, they're entering another period of growth and are looking to expand their team due to customer demand. Fire and Security Engineer Role and Responsibilities: Installation, Service, Repair, Fault-finding & Maintenance of Fire Alarms, Intruder Alarms, CCTV & Access Control Systems Field based role, covering a number of sites Working on a range of brands of manufacturer Take responsibility for the overall quality of the work delivered Carry out effective communication with customers at all times Ensure tasks are completed efficiently Providing support to team members where required Fire and Security Engineer Skills and Experience Required : A full UK driving licence or equivalent (Essential) A drive and enthusiasm to grab hold of opportunities Ideally you will have at least 3 years' experience working within the Fire and Security Sector Considering applicants with all or single discipline providing you are willing to train Knowledge of a range of manufacturers Desirable qualifications include: IPAF, CSCS/ ECS, FIA and/or City & Guilds A positive attitude and the ability to self-motivate is a must Benefits of this Fire and Security Engineer position include: Competitive basic salary of up to £45,000 per annum (Negotiable depending on experience) Company vehicle & fuel card Plenty of overtime available if wanted Opportunity to earn more money via the on-call rota Annual leave provided Pension scheme On-going training opportunities Travel Pay DON'T MISS OUT ON THIS GREAT OPPORTUNITY - APPLY NOW Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful.
Job Title: Senior Engineer - Electrical Engineering (Control & Instrumentation) Location: Barrow-In-Furness, Onsite -2 days on site every 2 weeks We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £42,215+ (DOE) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role Description: You'll play a key role in developing and ensuring requirements for advanced submarine control systems, shaping how critical platform technologies are designed, integrated and validated. You will produce technical documentation, define hardware and software requirements, and support design reviews-ensuring solutions meet programme, safety and performance standards. Working within a specialist Control & Instrumentation team, you'll contribute to SSNA platform development, using engineering tools and system databases to oversee interfaces and functionality. You'll also support verification activities and functional safety compliance (IEC 61508/61511), helping deliver innovative, high-integrity systems that are vital to the success of next-generation submarines. Core duties: You will develop and facilitate system requirements, ensuring clear acceptance criteria aligned to programme needs You'll produce detailed design documentation, including diagrams, calculations and technical justifications to support engineering strategies You support Certificate of Design activities, preparing evidence and presenting clear technical arguments to stakeholders You'll define hardware and software requirements, guiding suppliers in delivering compliant and effective control system solutions Your role includes overseeing system interfaces and delivering verification evidence to meet functional safety standards (IEC 61508/61511) Essential Skills: You demonstrate a relevant engineering degree (BEng/MEng or equivalent), ideally progressing toward professional registration You will produce clear, structured technical reports across the engineering lifecycle to support design and assurance activities You'll apply systems engineering values effectively within highly detailed environments, interpreting requirements and supporting technical solutions Your experience includes system calculations, modelling and evaluation to inform design strategies and performance outcomes You bring understanding of control systems, instrumentation theory (e.g. PID) or system architecture concepts Knowledge of defence standards is beneficial, supporting compliance within highly regulated engineering programmes The Centralised Control and Instrumentation Team: You will be joining a team of 16 engineers, that progress the design and validation of critical SSNA control systems across hardware, software and safety. Working on highly multi-layered, safety-critical technology, the team ensures reliable platform performance-offering exciting tasks, intricate work and ample opportunities for technical growth. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 3rd April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 21, 2026
Full time
Job Title: Senior Engineer - Electrical Engineering (Control & Instrumentation) Location: Barrow-In-Furness, Onsite -2 days on site every 2 weeks We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £42,215+ (DOE) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role Description: You'll play a key role in developing and ensuring requirements for advanced submarine control systems, shaping how critical platform technologies are designed, integrated and validated. You will produce technical documentation, define hardware and software requirements, and support design reviews-ensuring solutions meet programme, safety and performance standards. Working within a specialist Control & Instrumentation team, you'll contribute to SSNA platform development, using engineering tools and system databases to oversee interfaces and functionality. You'll also support verification activities and functional safety compliance (IEC 61508/61511), helping deliver innovative, high-integrity systems that are vital to the success of next-generation submarines. Core duties: You will develop and facilitate system requirements, ensuring clear acceptance criteria aligned to programme needs You'll produce detailed design documentation, including diagrams, calculations and technical justifications to support engineering strategies You support Certificate of Design activities, preparing evidence and presenting clear technical arguments to stakeholders You'll define hardware and software requirements, guiding suppliers in delivering compliant and effective control system solutions Your role includes overseeing system interfaces and delivering verification evidence to meet functional safety standards (IEC 61508/61511) Essential Skills: You demonstrate a relevant engineering degree (BEng/MEng or equivalent), ideally progressing toward professional registration You will produce clear, structured technical reports across the engineering lifecycle to support design and assurance activities You'll apply systems engineering values effectively within highly detailed environments, interpreting requirements and supporting technical solutions Your experience includes system calculations, modelling and evaluation to inform design strategies and performance outcomes You bring understanding of control systems, instrumentation theory (e.g. PID) or system architecture concepts Knowledge of defence standards is beneficial, supporting compliance within highly regulated engineering programmes The Centralised Control and Instrumentation Team: You will be joining a team of 16 engineers, that progress the design and validation of critical SSNA control systems across hardware, software and safety. Working on highly multi-layered, safety-critical technology, the team ensures reliable platform performance-offering exciting tasks, intricate work and ample opportunities for technical growth. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 3rd April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Contract Opportunity Gas Quality Control Auditor Earning Potential £24.65 per job Typically up to 16 jobs per day initially Potential to increase to up to 20 jobs per day once established High earning potential for productive auditors Scope of Work You will be responsible for carrying out quality control inspections on: Domestic gas installations Service and repair work Key duties include: Ensuring all work complies with current gas safety regulations Verifying standards of workmanship and compliance Conducting thorough checks and inspections Completing accurate reports and documentation Requirements To be successful in this role, you will need: Full ACS qualifications, including: CCN1 CENWAT (CEN1 & WAT1) HTR1 CKR1 CPA1 Strong knowledge of domestic gas appliances and central heating systems Solid understanding of relevant industry regulations and standards Excellent communication and reporting skills Full UK driving licence Your own tools
Mar 21, 2026
Contractor
Contract Opportunity Gas Quality Control Auditor Earning Potential £24.65 per job Typically up to 16 jobs per day initially Potential to increase to up to 20 jobs per day once established High earning potential for productive auditors Scope of Work You will be responsible for carrying out quality control inspections on: Domestic gas installations Service and repair work Key duties include: Ensuring all work complies with current gas safety regulations Verifying standards of workmanship and compliance Conducting thorough checks and inspections Completing accurate reports and documentation Requirements To be successful in this role, you will need: Full ACS qualifications, including: CCN1 CENWAT (CEN1 & WAT1) HTR1 CKR1 CPA1 Strong knowledge of domestic gas appliances and central heating systems Solid understanding of relevant industry regulations and standards Excellent communication and reporting skills Full UK driving licence Your own tools
Baltic Recruitment Limited
Washington, Tyne And Wear
Baltic Recruitment are delighted to be partnering with a market-leading manufacturing organisation in the search for a dynamic and experienced HSE Manager. This is an exciting opportunity to lead health, safety, and environmental initiatives in a fast-paced, innovative manufacturing environment, making a real impact on operational excellence and workforce wellbeing. Overall Purpose: To ensure compliance with UK HSE legislation and relevant industry standards, ensuring safe operations at Washington Manufacturing site The role holder will work closely with colleagues within HR team, continuous improvement team, heads of departments and CEO, in consultation and collaboration with maintenance, engineering, design, warehousing and production teams to proactivity identify, eliminate and manage risks, enhance safe working practices and maintain a safe compliant and highly efficient quality operation. Key Duties: Health and Safety Leadership: Develop implement and continuously improve health and safety policies and procedures tailored to the manufacturing environment, wider office locations and home office environments. Lead and champion a proactive high performing safety culture. Provide expert advise to senior leadership and operational management on safety risk management and regulatory requirements. Regulatory Compliance: Ensure compliance with all relevant legislation including but not limited to Health and Safety at work Act, COSHH, PUWER, RIDDOR and relevant HSE guidance. Support alignment with external standards such as ISO 13485/MDR in co-ordination with Quality teams Lead interactions with external regulatory bodies, auditors and certification partners on Health, Safety and Environmental matters. Risk Assessment & Controls: Conduct and maintain risk assessments, COSHH Assessments, DSE Assessments, and machine safety reviews across all manufacturing site environments and office locations. Oversee safe systems of work including lock out/tagout, manual handing, working at height and equipment validation and training compliance. Carry out regular health and safety inspections/audits of production areas, office areas, storage, warehouse, rest areas and vehicle movements both onsite and access/egress to the sites. Ensure compliance with machine guarding and PUWER requirements. Work with Engineering and Quality on equipment qualification, process change and layout improvements to ensure continued safety. Provide Environmental monitoring and waste management aligned with both regulatory requirement and business environmental improvement initiatives. Incident & Near Miss Management: Lead timely investigations into all incidents using root cause analysis tools. Work cross functionally to implement corrective actions and preventive actions using CAPAs. Analyse trends to identify high risk areas and implement targeted improvement actions. Training & Engagement: Deliver and co-ordinate health and safety training covering PPE, Induction, Chemical handling, production activities, first aid, emergency response, mental health first aid, fire marshals and equipment safety. Support operational managers and SLT in coaching staff, reinforcing daily safe operating practices. Lead the Health and Safety Committee to drive employee engagement and participation in continuous improvement practices. Emergency Preparation: Fire safety management, maintain and regularly test emergency response procedures including fire, chemical spillage and first aid. Documentation & Auditing Maintain accurate safety documentation including training records, COSHH, audit, permits and HSE incidents. Prepare safety performance reports and presentations as required for Senior Leadership Team and Line manager as directed. Support all internal and external audits. Environmental: Promote environmental sustainability initiatives and ensure environmental compliance. Provide Environmental Data reporting to ROKO. Key Requirements: Ideally hold a degree in Occupational health & safety, Environmental health, engineering or related field. Risk Assessment methodologies. Strong working Knowledge of UK HSE legislation. Strong Microsoft skills relating to Excel, Word and other Microsoft packages. The Package: £49,000 - £55,000 per annum. Day shift role: Monday to Friday 9AM - 5PM. Flexible Working is offered for this position. Employee is able to build a Flexible allowance 2 days credit/1 day deficit. Pension contribution 5%. Pension Salary Sacrifice Scheme. Death In service Benefit 2 x Annual salary. Perkbox. Health Shield, Cash Health Scheme.
Mar 21, 2026
Full time
Baltic Recruitment are delighted to be partnering with a market-leading manufacturing organisation in the search for a dynamic and experienced HSE Manager. This is an exciting opportunity to lead health, safety, and environmental initiatives in a fast-paced, innovative manufacturing environment, making a real impact on operational excellence and workforce wellbeing. Overall Purpose: To ensure compliance with UK HSE legislation and relevant industry standards, ensuring safe operations at Washington Manufacturing site The role holder will work closely with colleagues within HR team, continuous improvement team, heads of departments and CEO, in consultation and collaboration with maintenance, engineering, design, warehousing and production teams to proactivity identify, eliminate and manage risks, enhance safe working practices and maintain a safe compliant and highly efficient quality operation. Key Duties: Health and Safety Leadership: Develop implement and continuously improve health and safety policies and procedures tailored to the manufacturing environment, wider office locations and home office environments. Lead and champion a proactive high performing safety culture. Provide expert advise to senior leadership and operational management on safety risk management and regulatory requirements. Regulatory Compliance: Ensure compliance with all relevant legislation including but not limited to Health and Safety at work Act, COSHH, PUWER, RIDDOR and relevant HSE guidance. Support alignment with external standards such as ISO 13485/MDR in co-ordination with Quality teams Lead interactions with external regulatory bodies, auditors and certification partners on Health, Safety and Environmental matters. Risk Assessment & Controls: Conduct and maintain risk assessments, COSHH Assessments, DSE Assessments, and machine safety reviews across all manufacturing site environments and office locations. Oversee safe systems of work including lock out/tagout, manual handing, working at height and equipment validation and training compliance. Carry out regular health and safety inspections/audits of production areas, office areas, storage, warehouse, rest areas and vehicle movements both onsite and access/egress to the sites. Ensure compliance with machine guarding and PUWER requirements. Work with Engineering and Quality on equipment qualification, process change and layout improvements to ensure continued safety. Provide Environmental monitoring and waste management aligned with both regulatory requirement and business environmental improvement initiatives. Incident & Near Miss Management: Lead timely investigations into all incidents using root cause analysis tools. Work cross functionally to implement corrective actions and preventive actions using CAPAs. Analyse trends to identify high risk areas and implement targeted improvement actions. Training & Engagement: Deliver and co-ordinate health and safety training covering PPE, Induction, Chemical handling, production activities, first aid, emergency response, mental health first aid, fire marshals and equipment safety. Support operational managers and SLT in coaching staff, reinforcing daily safe operating practices. Lead the Health and Safety Committee to drive employee engagement and participation in continuous improvement practices. Emergency Preparation: Fire safety management, maintain and regularly test emergency response procedures including fire, chemical spillage and first aid. Documentation & Auditing Maintain accurate safety documentation including training records, COSHH, audit, permits and HSE incidents. Prepare safety performance reports and presentations as required for Senior Leadership Team and Line manager as directed. Support all internal and external audits. Environmental: Promote environmental sustainability initiatives and ensure environmental compliance. Provide Environmental Data reporting to ROKO. Key Requirements: Ideally hold a degree in Occupational health & safety, Environmental health, engineering or related field. Risk Assessment methodologies. Strong working Knowledge of UK HSE legislation. Strong Microsoft skills relating to Excel, Word and other Microsoft packages. The Package: £49,000 - £55,000 per annum. Day shift role: Monday to Friday 9AM - 5PM. Flexible Working is offered for this position. Employee is able to build a Flexible allowance 2 days credit/1 day deficit. Pension contribution 5%. Pension Salary Sacrifice Scheme. Death In service Benefit 2 x Annual salary. Perkbox. Health Shield, Cash Health Scheme.
Job Title: Principal Engineer - Human Factors Location: UK wide - Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role Description: You'll Assess risks of human error and providing Human Factors advice You'll be Performing task analysis You'll be working with process authors to improve procedures to reduce risk of unintended outcomes You'll be representing Human Factors at design technical reviews You'll be conducting design substantiation reviews You'll be supporting Safety Case delivery You'll be leading Human Factors programmes of work Essential Skills: Degree in Human Factors/Psychology or equivalent experience Demonstrable Human Factors experience Experience in delivering Human Factors into safety case in a nuclear setting Previous experience of stakeholder management Proven experience in coaching and mentor others Experience in writing assessment reports and safety cases The Human factors Team: As a Principal Engineer - Human Factors, working within The Human Factors Team. You will be looking at the Human Factors of Site Safety of the Barrow site and Boat programmes. As a Principal Human Factors engineer, you will be part of a team working across all 3 submarine programmes at BAE Systems. This is a very exciting time to be joining one the largest Human Factors teams in the UK. Our team provides safety-oriented support to the day-to-day business of designing, building and operating submarines and to the maintenance of our nuclear site licence. Should you wish to relocate closer to the nuclear site at Barrow, we offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. Hybrid
Mar 21, 2026
Full time
Job Title: Principal Engineer - Human Factors Location: UK wide - Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role Description: You'll Assess risks of human error and providing Human Factors advice You'll be Performing task analysis You'll be working with process authors to improve procedures to reduce risk of unintended outcomes You'll be representing Human Factors at design technical reviews You'll be conducting design substantiation reviews You'll be supporting Safety Case delivery You'll be leading Human Factors programmes of work Essential Skills: Degree in Human Factors/Psychology or equivalent experience Demonstrable Human Factors experience Experience in delivering Human Factors into safety case in a nuclear setting Previous experience of stakeholder management Proven experience in coaching and mentor others Experience in writing assessment reports and safety cases The Human factors Team: As a Principal Engineer - Human Factors, working within The Human Factors Team. You will be looking at the Human Factors of Site Safety of the Barrow site and Boat programmes. As a Principal Human Factors engineer, you will be part of a team working across all 3 submarine programmes at BAE Systems. This is a very exciting time to be joining one the largest Human Factors teams in the UK. Our team provides safety-oriented support to the day-to-day business of designing, building and operating submarines and to the maintenance of our nuclear site licence. Should you wish to relocate closer to the nuclear site at Barrow, we offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. Hybrid
Total Control Solutions LTD
Bury St. Edmunds, Suffolk
Duties - Install, maintain, and repair electrical systems and equipment in commercial, and industrial settings - Read blueprints or technical diagrams to determine the location of wiring and equipment - Install control panels, wiring, circuit breakers, transformers, outlets, lighting fixtures, and other electrical components - Test electrical systems and continuity of circuits using testing devices such as ohmmeters and voltmeters. - Troubleshoot electrical malfunctions and perform repairs or replacements as needed - Follow safety guidelines and adhere to electrical codes and regulations Requirements - Proven experience as an electrician, engineer or completion of an apprenticeship program ( NVQ Level 3) - Strong knowledge of electrical systems and components - Proficient in the use of hand tools and power tools - Ability to read blueprints, technical diagrams, and schematics - Excellent problem-solving skills and attention to detail - Good physical condition with the ability to work in various environments (e.g., heights, confined spaces) - Valid driver's license - Excellent time management Note: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Job Type: Full-time Pay: £42,000.00-£47,000.00 per year Experience: electrical: 3 years (preferred) Licence/Certification: Driving Licence (required) Work authorisation: United Kingdom (required) Work Location: In person
Mar 21, 2026
Full time
Duties - Install, maintain, and repair electrical systems and equipment in commercial, and industrial settings - Read blueprints or technical diagrams to determine the location of wiring and equipment - Install control panels, wiring, circuit breakers, transformers, outlets, lighting fixtures, and other electrical components - Test electrical systems and continuity of circuits using testing devices such as ohmmeters and voltmeters. - Troubleshoot electrical malfunctions and perform repairs or replacements as needed - Follow safety guidelines and adhere to electrical codes and regulations Requirements - Proven experience as an electrician, engineer or completion of an apprenticeship program ( NVQ Level 3) - Strong knowledge of electrical systems and components - Proficient in the use of hand tools and power tools - Ability to read blueprints, technical diagrams, and schematics - Excellent problem-solving skills and attention to detail - Good physical condition with the ability to work in various environments (e.g., heights, confined spaces) - Valid driver's license - Excellent time management Note: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Job Type: Full-time Pay: £42,000.00-£47,000.00 per year Experience: electrical: 3 years (preferred) Licence/Certification: Driving Licence (required) Work authorisation: United Kingdom (required) Work Location: In person
We are hiring a Principal Software Engineer (Embedded Systems) based in Normanton, West Yorkshire to lead the design and development of cutting-edge embedded software for next-generation products. This is a senior-level opportunity for an experienced Normanton based Principal Software Engineer with deep expertise in C programming, RTOS (Real-Time Operating Systems), and wireless communication protocols. Reporting to the Group Technical Engineering Director, you will play a key role in shaping system architecture, driving technical excellence, and delivering high-performance, reliable embedded solutions. Key Responsibilities Design and develop embedded software for ARM-based microprocessors using RTOS (Zephyr, FreeRTOS, or similar) Implement and optimise wireless communication protocols such as Bluetooth, Wi-Fi, Zigbee Collaborate with hardware engineers and cross-functional teams to define system architecture and requirements Write, debug, and maintain high-quality C code following best practices (e.G. MISRA guidelines) Develop scalable and maintainable embedded solutions for IoT and connected devices Support web-based interfaces using JavaScript and HTML where required Contribute to Linux-based application development for testing and simulation Maintain clear technical documentation across design, testing, and troubleshooting Stay up to date with emerging trends in embedded systems, IoT, and software engineering Required Skills & Experience Strong experience in C programming for embedded systems Hands-on experience with RTOS (Zephyr, FreeRTOS, or similar) Knowledge of wireless communication technologies (Bluetooth, Wi-Fi, Zigbee) Experience with Linux OS application development Familiarity with Git, embedded IDEs, and development tools Understanding of secure software development, encryption, and secure protocols Exposure to JavaScript and HTML for UI or web integration Proven ability to lead engineering teams, manage workloads, and deliver projects Strong problem-solving and analytical skills Desirable Experience Background in IoT, consumer electronics, or embedded product development Experience with ARM-based microcontrollers and hardware integration Knowledge of C#, web applications, or cloud-connected embedded systems Education Bachelor's degree in Computer Science, Electronic Engineering, or a related field (or equivalent experience) Extensive' experience in embedded software engineering Key Competencies Technical Leadership - Deep expertise in embedded systems and software design Project Planning & Delivery - Ability to prioritise, delegate, and meet deadlines Collaboration & Communication - Strong cross-functional teamwork skills Adaptability - Thrives in fast-paced, evolving technical environments Innovation - Drives continuous improvement and creative problem-solving Accountability - Takes ownership and delivers high-quality results Why Apply? Work on next-generation embedded and IoT technologies Play a lead role in engineering innovation and product development Join a collaborative, forward-thinking engineering team in West Yorkshire Competitive salary and long-term career growth opportunities Apply Now If you're a passionate Principal Software Engineer in Normanton, West Yorkshire looking to work on advanced RTOS, C programming, and wireless systems, we'd love to hear from you. Please send over an updated cv to (url removed) or call (phone number removed).
Mar 21, 2026
Full time
We are hiring a Principal Software Engineer (Embedded Systems) based in Normanton, West Yorkshire to lead the design and development of cutting-edge embedded software for next-generation products. This is a senior-level opportunity for an experienced Normanton based Principal Software Engineer with deep expertise in C programming, RTOS (Real-Time Operating Systems), and wireless communication protocols. Reporting to the Group Technical Engineering Director, you will play a key role in shaping system architecture, driving technical excellence, and delivering high-performance, reliable embedded solutions. Key Responsibilities Design and develop embedded software for ARM-based microprocessors using RTOS (Zephyr, FreeRTOS, or similar) Implement and optimise wireless communication protocols such as Bluetooth, Wi-Fi, Zigbee Collaborate with hardware engineers and cross-functional teams to define system architecture and requirements Write, debug, and maintain high-quality C code following best practices (e.G. MISRA guidelines) Develop scalable and maintainable embedded solutions for IoT and connected devices Support web-based interfaces using JavaScript and HTML where required Contribute to Linux-based application development for testing and simulation Maintain clear technical documentation across design, testing, and troubleshooting Stay up to date with emerging trends in embedded systems, IoT, and software engineering Required Skills & Experience Strong experience in C programming for embedded systems Hands-on experience with RTOS (Zephyr, FreeRTOS, or similar) Knowledge of wireless communication technologies (Bluetooth, Wi-Fi, Zigbee) Experience with Linux OS application development Familiarity with Git, embedded IDEs, and development tools Understanding of secure software development, encryption, and secure protocols Exposure to JavaScript and HTML for UI or web integration Proven ability to lead engineering teams, manage workloads, and deliver projects Strong problem-solving and analytical skills Desirable Experience Background in IoT, consumer electronics, or embedded product development Experience with ARM-based microcontrollers and hardware integration Knowledge of C#, web applications, or cloud-connected embedded systems Education Bachelor's degree in Computer Science, Electronic Engineering, or a related field (or equivalent experience) Extensive' experience in embedded software engineering Key Competencies Technical Leadership - Deep expertise in embedded systems and software design Project Planning & Delivery - Ability to prioritise, delegate, and meet deadlines Collaboration & Communication - Strong cross-functional teamwork skills Adaptability - Thrives in fast-paced, evolving technical environments Innovation - Drives continuous improvement and creative problem-solving Accountability - Takes ownership and delivers high-quality results Why Apply? Work on next-generation embedded and IoT technologies Play a lead role in engineering innovation and product development Join a collaborative, forward-thinking engineering team in West Yorkshire Competitive salary and long-term career growth opportunities Apply Now If you're a passionate Principal Software Engineer in Normanton, West Yorkshire looking to work on advanced RTOS, C programming, and wireless systems, we'd love to hear from you. Please send over an updated cv to (url removed) or call (phone number removed).
Job Title: Sales Engineer Location: Witney, Oxfordshire Salary: Competitive + generous benefits Job Type: Permanent, Full time Meech International has an exciting opportunity available for a Sales Engineer to join our growing team based in Witney, Oxfordshire. This is a permanent role with a competitive rate of pay plus generous benefits which makes Meech a great place to work! The Benefits we offer our Sales Engineer: A competitive salary Discretionary profit share bonus Company Car 25 - 30 days holiday (based on length of service) + bank holidays Health insurance Pension scheme Life assurance 100 social club allowance to join in on activities Career development opportunities, training and learning resources Mental, financial and physical wellbeing support resources Free on-site parking Plus, many more benefits! The role: Reporting to the Sales Director, your primary role will be to develop and grow sales of the full product range in the UK & Ireland. The key responsibilities as our Sales Engineer: Proactive development of new prospects and leads to ensure the order pipeline is strong and maintained for all Meech products. Maximise penetration of existing repeat customers. Increase market coverage and grow the number of active customers each year. Collaborate closely with Business Development team to ensure there is an aligned approach for effective market coverage. Develop a regional plan for effective call planning for different customer tiers: multi-national key accounts, national accounts, and smaller transactional end users. Effective telephone, email and LinkedIn prospecting and proactive follow-up of new sales leads and marketing campaigns. Scheduling, planning and prioritising efficient and effective sales trips. Skills, knowledge and experience required by our Sales Engineer: Cover the UK and Ireland combined territory. Willingness to travel regularly as required (including frequent stays away from home), primarily within the UK and Ireland. A clean UK driving licence is required. Based at Meech's UK head office in Witney, Oxfordshire. Proven business-to-business technical sales ability and good commercial understanding, ideally within a related industry. Technical background and/or aptitude. Able to engage and adopt consultative as well as transaction selling styles. Skilled in a range of sales techniques to negotiate effectively with different decision makers within customers. Customer focused with excellent interpersonal skills to include professional credibility, networking, relationship building, negotiating and influencing. Proactive, self-motivated and achievement driven. Organised, confident, self-disciplined, thorough and logical. Who are we? Our mission is to design and manufacture the best and most innovative Static Control and Surface Cleaning equipment to optimise our customers' productivity. Founded in 1907, for over a century we have been engineering and manufacturing products in the UK that are used worldwide. We have a constant focus on improvement and we collaborate with our global offices and distributors, who in turn work closely with their local markets, to achieve all our goals. What we do. We have four separate divisions: Static Control, Web Cleaning, Compressed Air Technology and Surface Cleaning Systems. Each division is interconnected through applications in various sectors. We work in a large number of diverse industries all over the world, including pharmaceutical, food & beverage and the emerging EV Battery market, where we are at the forefront of development in specialist contamination removal and static control. If you have the skills and experience to become our Sales Engineer , please apply now. We'd love to hear from you. Please see our Data Privacy Notice - Recruitment & Selection on our website for more information about how we process your data when you apply. Candidates with experience or relevant job titles of; Solutions Consultant, Solutions Engineer, Systems Engineer, or Technical Account Manager, may also be considered for this role.
Mar 21, 2026
Full time
Job Title: Sales Engineer Location: Witney, Oxfordshire Salary: Competitive + generous benefits Job Type: Permanent, Full time Meech International has an exciting opportunity available for a Sales Engineer to join our growing team based in Witney, Oxfordshire. This is a permanent role with a competitive rate of pay plus generous benefits which makes Meech a great place to work! The Benefits we offer our Sales Engineer: A competitive salary Discretionary profit share bonus Company Car 25 - 30 days holiday (based on length of service) + bank holidays Health insurance Pension scheme Life assurance 100 social club allowance to join in on activities Career development opportunities, training and learning resources Mental, financial and physical wellbeing support resources Free on-site parking Plus, many more benefits! The role: Reporting to the Sales Director, your primary role will be to develop and grow sales of the full product range in the UK & Ireland. The key responsibilities as our Sales Engineer: Proactive development of new prospects and leads to ensure the order pipeline is strong and maintained for all Meech products. Maximise penetration of existing repeat customers. Increase market coverage and grow the number of active customers each year. Collaborate closely with Business Development team to ensure there is an aligned approach for effective market coverage. Develop a regional plan for effective call planning for different customer tiers: multi-national key accounts, national accounts, and smaller transactional end users. Effective telephone, email and LinkedIn prospecting and proactive follow-up of new sales leads and marketing campaigns. Scheduling, planning and prioritising efficient and effective sales trips. Skills, knowledge and experience required by our Sales Engineer: Cover the UK and Ireland combined territory. Willingness to travel regularly as required (including frequent stays away from home), primarily within the UK and Ireland. A clean UK driving licence is required. Based at Meech's UK head office in Witney, Oxfordshire. Proven business-to-business technical sales ability and good commercial understanding, ideally within a related industry. Technical background and/or aptitude. Able to engage and adopt consultative as well as transaction selling styles. Skilled in a range of sales techniques to negotiate effectively with different decision makers within customers. Customer focused with excellent interpersonal skills to include professional credibility, networking, relationship building, negotiating and influencing. Proactive, self-motivated and achievement driven. Organised, confident, self-disciplined, thorough and logical. Who are we? Our mission is to design and manufacture the best and most innovative Static Control and Surface Cleaning equipment to optimise our customers' productivity. Founded in 1907, for over a century we have been engineering and manufacturing products in the UK that are used worldwide. We have a constant focus on improvement and we collaborate with our global offices and distributors, who in turn work closely with their local markets, to achieve all our goals. What we do. We have four separate divisions: Static Control, Web Cleaning, Compressed Air Technology and Surface Cleaning Systems. Each division is interconnected through applications in various sectors. We work in a large number of diverse industries all over the world, including pharmaceutical, food & beverage and the emerging EV Battery market, where we are at the forefront of development in specialist contamination removal and static control. If you have the skills and experience to become our Sales Engineer , please apply now. We'd love to hear from you. Please see our Data Privacy Notice - Recruitment & Selection on our website for more information about how we process your data when you apply. Candidates with experience or relevant job titles of; Solutions Consultant, Solutions Engineer, Systems Engineer, or Technical Account Manager, may also be considered for this role.
WE ARE EXPANDING! Entry Group UK Ltd are recruiting for an additional Automatic & Industrial Door Engineer to join our service, installation and maintenance teams working from our PLYMOUTH Depot based in Plympton. The right candidate will be responsible for all aspects when carrying out the service, repair and installation of Industrial doors, Automatic gates, Automatic Doors, Access control systems, Traffic Barriers and more within industrial and retail premises, whilst covering a call out rota 1 in 10 weeks. The role will include the installation, repair, fault finding and servicing of all door automation manufacturers such as GFA, Ellard, BFT, CAME, Dorma, Besam, Entrematic, Geze & Record. You may also be required to carry out installations of aluminium door sets so knowledge in this area would be advantageous. The successful candidate will have the following essential : Full Clean UK Driving License Industrial and Automatic Door knowledge of more than 2 years in at least one of these fields Desirable (not essential but may be an advantage): Electrical experience or 18th Edition CSCS Card IPAF Pasma Three phase and single-phase electrical knowledge The right candidate will have fault finding skills, be hard working, self-motivated and be able to pay attention to detail. You must be capable of working under your own initiative. Competent in carrying out verbal instructions, performing physical tasks including moving and lifting heavy objects. Must be willing to work on call out rota and be flexible with working overtime as the business requires. If you possess the necessary skills and are eager to contribute to our innovative projects, we encourage you to apply for this exciting opportunity as an Industrial & Automatic Door Engineer. Job Type: Full-time Pay: £18.50-£20.00 per hour Benefits: Company events Company pension On-site parking Work Location: In person
Mar 21, 2026
Full time
WE ARE EXPANDING! Entry Group UK Ltd are recruiting for an additional Automatic & Industrial Door Engineer to join our service, installation and maintenance teams working from our PLYMOUTH Depot based in Plympton. The right candidate will be responsible for all aspects when carrying out the service, repair and installation of Industrial doors, Automatic gates, Automatic Doors, Access control systems, Traffic Barriers and more within industrial and retail premises, whilst covering a call out rota 1 in 10 weeks. The role will include the installation, repair, fault finding and servicing of all door automation manufacturers such as GFA, Ellard, BFT, CAME, Dorma, Besam, Entrematic, Geze & Record. You may also be required to carry out installations of aluminium door sets so knowledge in this area would be advantageous. The successful candidate will have the following essential : Full Clean UK Driving License Industrial and Automatic Door knowledge of more than 2 years in at least one of these fields Desirable (not essential but may be an advantage): Electrical experience or 18th Edition CSCS Card IPAF Pasma Three phase and single-phase electrical knowledge The right candidate will have fault finding skills, be hard working, self-motivated and be able to pay attention to detail. You must be capable of working under your own initiative. Competent in carrying out verbal instructions, performing physical tasks including moving and lifting heavy objects. Must be willing to work on call out rota and be flexible with working overtime as the business requires. If you possess the necessary skills and are eager to contribute to our innovative projects, we encourage you to apply for this exciting opportunity as an Industrial & Automatic Door Engineer. Job Type: Full-time Pay: £18.50-£20.00 per hour Benefits: Company events Company pension On-site parking Work Location: In person
Job Title: Principal Engineer - Human Factors Location: UK wide - Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role Description: You'll Assess risks of human error and providing Human Factors advice You'll be Performing task analysis You'll be working with process authors to improve procedures to reduce risk of unintended outcomes You'll be representing Human Factors at design technical reviews You'll be conducting design substantiation reviews You'll be supporting Safety Case delivery You'll be leading Human Factors programmes of work Essential Skills: Degree in Human Factors/Psychology or equivalent experience Demonstrable Human Factors experience Experience in delivering Human Factors into safety case in a nuclear setting Previous experience of stakeholder management Proven experience in coaching and mentor others Experience in writing assessment reports and safety cases The Human factors Team: As a Principal Engineer - Human Factors, working within The Human Factors Team. You will be looking at the Human Factors of Site Safety of the Barrow site and Boat programmes. As a Principal Human Factors engineer, you will be part of a team working across all 3 submarine programmes at BAE Systems. This is a very exciting time to be joining one the largest Human Factors teams in the UK. Our team provides safety-oriented support to the day-to-day business of designing, building and operating submarines and to the maintenance of our nuclear site licence. Should you wish to relocate closer to the nuclear site at Barrow, we offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. Hybrid
Mar 21, 2026
Full time
Job Title: Principal Engineer - Human Factors Location: UK wide - Hybrid We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role Description: You'll Assess risks of human error and providing Human Factors advice You'll be Performing task analysis You'll be working with process authors to improve procedures to reduce risk of unintended outcomes You'll be representing Human Factors at design technical reviews You'll be conducting design substantiation reviews You'll be supporting Safety Case delivery You'll be leading Human Factors programmes of work Essential Skills: Degree in Human Factors/Psychology or equivalent experience Demonstrable Human Factors experience Experience in delivering Human Factors into safety case in a nuclear setting Previous experience of stakeholder management Proven experience in coaching and mentor others Experience in writing assessment reports and safety cases The Human factors Team: As a Principal Engineer - Human Factors, working within The Human Factors Team. You will be looking at the Human Factors of Site Safety of the Barrow site and Boat programmes. As a Principal Human Factors engineer, you will be part of a team working across all 3 submarine programmes at BAE Systems. This is a very exciting time to be joining one the largest Human Factors teams in the UK. Our team provides safety-oriented support to the day-to-day business of designing, building and operating submarines and to the maintenance of our nuclear site licence. Should you wish to relocate closer to the nuclear site at Barrow, we offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. Hybrid
Job Title : Fire & Security Systems Engineer Location : Swindon Salary: 40,000 per year Job type: Full time - Permanent. Monday to Friday 8am to 5pm but with flexibility to suit. Are you passionate about safety and security? Do you thrive in a dynamic environment where your expertise can make a real difference? Look no further! We are seeking dedicated professionals to join our client's family-run business-a leading independent fire and security solutions provider. About Us: With over 30 years of experience, we specialise in comprehensive fire and security solutions. Our services include supplying, installing, commissioning, and maintaining fire extinguishers, fire alarms, emergency lighting, access control systems, intruder alarms, and CCTV. As an NSI Gold-accredited company for both Fire and Security, we take pride in our commitment to excellence. Why Choose Us? Local Impact: Our growing franchise network across the UK provides personalised service, ensuring safety and security in their communities. Expertise: Our engineers are BAFE registered, bringing top-tier skills to every project. Respected Reputation: Since our formation in 1991, we have steadily grown to become one of the most respected solutions-led companies in the field. Role Overview: As an Engineer, you will assist in the installation and maintenance of fire and security equipment and expand your knowledge on different systems. Your workdays will be dynamic and diverse. One day, you might be installing fire extinguishers, while the next, you will be servicing a large commercial fire or intruder alarm system. Regardless of the task, one constant remains: you will always represent our client's business and recognise the importance of delivering exceptional customer service. Variety: No two days are the same. You will tackle exciting challenges and contribute to safety. Impact: Beyond fixing systems, you will safeguard lives and property. Community: Join our close-knit team and make a difference in your local area. The Important Bit - The Package: Local work around Swindon area 25 Days Annual Leave plus Bank Holidays Additional day off for your birthday Continuous ongoing training opportunities with direct access to training centre and support from the National Training Manager Company pension Company van, laptop, tablet, mobile phone, and uniform Permanent contract, Monday to Friday 8am to 5pm but with flexibility to suit. Opportunity to progress within the business across different departments or branches Private health insurance Profit share Key Requirements: Previous experience in maintaining and fault-finding fire alarms, or access control systems, intruder alarms and CCTV (further training will be available) along with minor works desirable Excellent interpersonal and communication skills Ability to manage own workload with minimal supervision Diligence and commitment to providing excellent customer service Full UK driving license Due to the nature of the business, successful applicants will be subject to Security Screening in accordance with BS7858. More about us: We are committed to promoting diversity and inclusion in the workplace. We believe that a diverse and inclusive workforce enhances our ability to meet the needs of clients and fosters a positive and collaborative work environment. Applications are invited from individuals of all backgrounds, regardless of race, ethnicity, gender, sexual orientation, gender identity, age, religion, disability, or any other characteristic. Hiring decisions are based on merit, qualifications, and business needs. We strive to create an inclusive culture where all employees feel valued and respected. As an equal opportunities' employer, we actively encourage candidates from underrepresented groups to apply. Please click APPLY to send your CV for this role. Candidates with the relevant experience or job title of; Fire Alarm Systems Engineer, Security Systems Engineer, Infrastructure Engineer, IT Infrastructure Systems Engineer, Technical Systems Engineer, also be considered for this role.
Mar 21, 2026
Full time
Job Title : Fire & Security Systems Engineer Location : Swindon Salary: 40,000 per year Job type: Full time - Permanent. Monday to Friday 8am to 5pm but with flexibility to suit. Are you passionate about safety and security? Do you thrive in a dynamic environment where your expertise can make a real difference? Look no further! We are seeking dedicated professionals to join our client's family-run business-a leading independent fire and security solutions provider. About Us: With over 30 years of experience, we specialise in comprehensive fire and security solutions. Our services include supplying, installing, commissioning, and maintaining fire extinguishers, fire alarms, emergency lighting, access control systems, intruder alarms, and CCTV. As an NSI Gold-accredited company for both Fire and Security, we take pride in our commitment to excellence. Why Choose Us? Local Impact: Our growing franchise network across the UK provides personalised service, ensuring safety and security in their communities. Expertise: Our engineers are BAFE registered, bringing top-tier skills to every project. Respected Reputation: Since our formation in 1991, we have steadily grown to become one of the most respected solutions-led companies in the field. Role Overview: As an Engineer, you will assist in the installation and maintenance of fire and security equipment and expand your knowledge on different systems. Your workdays will be dynamic and diverse. One day, you might be installing fire extinguishers, while the next, you will be servicing a large commercial fire or intruder alarm system. Regardless of the task, one constant remains: you will always represent our client's business and recognise the importance of delivering exceptional customer service. Variety: No two days are the same. You will tackle exciting challenges and contribute to safety. Impact: Beyond fixing systems, you will safeguard lives and property. Community: Join our close-knit team and make a difference in your local area. The Important Bit - The Package: Local work around Swindon area 25 Days Annual Leave plus Bank Holidays Additional day off for your birthday Continuous ongoing training opportunities with direct access to training centre and support from the National Training Manager Company pension Company van, laptop, tablet, mobile phone, and uniform Permanent contract, Monday to Friday 8am to 5pm but with flexibility to suit. Opportunity to progress within the business across different departments or branches Private health insurance Profit share Key Requirements: Previous experience in maintaining and fault-finding fire alarms, or access control systems, intruder alarms and CCTV (further training will be available) along with minor works desirable Excellent interpersonal and communication skills Ability to manage own workload with minimal supervision Diligence and commitment to providing excellent customer service Full UK driving license Due to the nature of the business, successful applicants will be subject to Security Screening in accordance with BS7858. More about us: We are committed to promoting diversity and inclusion in the workplace. We believe that a diverse and inclusive workforce enhances our ability to meet the needs of clients and fosters a positive and collaborative work environment. Applications are invited from individuals of all backgrounds, regardless of race, ethnicity, gender, sexual orientation, gender identity, age, religion, disability, or any other characteristic. Hiring decisions are based on merit, qualifications, and business needs. We strive to create an inclusive culture where all employees feel valued and respected. As an equal opportunities' employer, we actively encourage candidates from underrepresented groups to apply. Please click APPLY to send your CV for this role. Candidates with the relevant experience or job title of; Fire Alarm Systems Engineer, Security Systems Engineer, Infrastructure Engineer, IT Infrastructure Systems Engineer, Technical Systems Engineer, also be considered for this role.
Key Tasks The post holder will follow safe systems of work, taking reasonable care of their own health and safety, and that of others. Eliminating or reducing risks where practicable by complying with site safety rules and instructions and reporting hazards to management for prompt action Safely maintain and repair mechanical systems and associated assets. Act proactively to identify reactive and remedial maintenance work and ensure all tasks are logged with the CMMS (computerised maintenance management system) ensure documentation of maintenance activities is to GxP standards where necessary. Training, as needed will be given to the right candidate if not already in place to cover, for example working at height, confined space entry etc. Be proactive and take ownership of issues and understand buildings and systems. Ensure that asset registers are maintained, ensure statutory and non-statutory logs are kept up to date Ensure compliance with PPM and Reactive Tasks / S.L.A's, ensure effective use and maintenance of O&M's and quality procedures Act professionally at all times with the client, develop and communicate best working practice, adopt a pro-active approach to customer liaison and ensure any concerns are dealt with promptly or relayed to line management Carry out Mechanical maintenance and repair works as requested and directed by the Mechanical Team Leader/Maintenance Supervisor/Manager. Carry out site safety / breakdown and workplace inspections and investigations as delegated by the Mechanical Team Leader/Maintenance Supervisor/Manager. To be familiar with the site systems including Mechanical infrastructure and utilities / Steam boilers and steam and condensate systems and the operation of / Chilled water systems / Compressed air systems / Pumps / AHUs / BMS system / planned or corrective maintenance tasks that need to be carried out. This list is a guide and not exhaustive. Maintain plant and services to ensure their optimum operational performance to a safe, efficient and economic standard. Ensure all sub-contractor personnel are fully inducted in site system. Supervise subcontracted works ensuring all works are carried out to legislative, CBRE 3rd Party procedures and local Client quality requirements and recognised standards. To ensure appropriate permits ( and associated paperwork ) are completed for all required tasks undertaken by self, team and 3rd party contractors. To assist in the control and purchasing of Mechanical maintenance parts and equipment items as needed. To be responsive to reasonable requests to work extended weekday and weekend hours when and where required by the Mechanical Team Leader/Maintenance Supervisor/Manager or Site Management. Sickness and absenteeism to be in line with CBRE standards. Must be a good communicator, have experience of managing sub-contractors and have the ability to make decisions and control a number of concurrent delegated tasks. Must be flexible and assist the Site Management in any maintenance role as required by the operational needs of the business. The job description is a guide to the work you may perform. It may be changed from time to time to reflect the changing needs of the contract and client. It does not form part of your contract of employment. This post profile is intended to give the post holder an appreciation of the role envisaged for an experienced Mechanical maintenance technician having a hard services background and the range of duties to be undertaken. It does not attempt to detail every activity. Specific tasks and objectives will be agreed with the post holder at regular intervals. Why CBRE? When you join CBRE, you become part of the global leader in commercial real estate services and investment that helps businesses and people thrive. We are dynamic problem solvers and forward-thinking professionals who create significant impact. Our collaborative culture is built on our shared values - respect, integrity, service and excellence - and we value the diverse perspectives, backgrounds and skillsets of our people. At CBRE, you have the opportunity to chart your own course and realize your potential. We welcome all applicants. Applicant AI Use Disclosure We value human interaction to understand each candidate's unique experience, skills and aspirations. We do not use artificial intelligence (AI) tools to make hiring decisions, and we ask that candidates disclose any use of AI in the application and interview process.
Mar 21, 2026
Full time
Key Tasks The post holder will follow safe systems of work, taking reasonable care of their own health and safety, and that of others. Eliminating or reducing risks where practicable by complying with site safety rules and instructions and reporting hazards to management for prompt action Safely maintain and repair mechanical systems and associated assets. Act proactively to identify reactive and remedial maintenance work and ensure all tasks are logged with the CMMS (computerised maintenance management system) ensure documentation of maintenance activities is to GxP standards where necessary. Training, as needed will be given to the right candidate if not already in place to cover, for example working at height, confined space entry etc. Be proactive and take ownership of issues and understand buildings and systems. Ensure that asset registers are maintained, ensure statutory and non-statutory logs are kept up to date Ensure compliance with PPM and Reactive Tasks / S.L.A's, ensure effective use and maintenance of O&M's and quality procedures Act professionally at all times with the client, develop and communicate best working practice, adopt a pro-active approach to customer liaison and ensure any concerns are dealt with promptly or relayed to line management Carry out Mechanical maintenance and repair works as requested and directed by the Mechanical Team Leader/Maintenance Supervisor/Manager. Carry out site safety / breakdown and workplace inspections and investigations as delegated by the Mechanical Team Leader/Maintenance Supervisor/Manager. To be familiar with the site systems including Mechanical infrastructure and utilities / Steam boilers and steam and condensate systems and the operation of / Chilled water systems / Compressed air systems / Pumps / AHUs / BMS system / planned or corrective maintenance tasks that need to be carried out. This list is a guide and not exhaustive. Maintain plant and services to ensure their optimum operational performance to a safe, efficient and economic standard. Ensure all sub-contractor personnel are fully inducted in site system. Supervise subcontracted works ensuring all works are carried out to legislative, CBRE 3rd Party procedures and local Client quality requirements and recognised standards. To ensure appropriate permits ( and associated paperwork ) are completed for all required tasks undertaken by self, team and 3rd party contractors. To assist in the control and purchasing of Mechanical maintenance parts and equipment items as needed. To be responsive to reasonable requests to work extended weekday and weekend hours when and where required by the Mechanical Team Leader/Maintenance Supervisor/Manager or Site Management. Sickness and absenteeism to be in line with CBRE standards. Must be a good communicator, have experience of managing sub-contractors and have the ability to make decisions and control a number of concurrent delegated tasks. Must be flexible and assist the Site Management in any maintenance role as required by the operational needs of the business. The job description is a guide to the work you may perform. It may be changed from time to time to reflect the changing needs of the contract and client. It does not form part of your contract of employment. This post profile is intended to give the post holder an appreciation of the role envisaged for an experienced Mechanical maintenance technician having a hard services background and the range of duties to be undertaken. It does not attempt to detail every activity. Specific tasks and objectives will be agreed with the post holder at regular intervals. Why CBRE? When you join CBRE, you become part of the global leader in commercial real estate services and investment that helps businesses and people thrive. We are dynamic problem solvers and forward-thinking professionals who create significant impact. Our collaborative culture is built on our shared values - respect, integrity, service and excellence - and we value the diverse perspectives, backgrounds and skillsets of our people. At CBRE, you have the opportunity to chart your own course and realize your potential. We welcome all applicants. Applicant AI Use Disclosure We value human interaction to understand each candidate's unique experience, skills and aspirations. We do not use artificial intelligence (AI) tools to make hiring decisions, and we ask that candidates disclose any use of AI in the application and interview process.
Blue Water Recruitment Limited
Southampton, Hampshire
Document Controller / Office Manager We are seeking a highly organised and proactive Document Controller / Office Manager for an ongoing placement supporting the next phase of civil engineering works in Fawley, Southampton. This is a hybrid role based primarily on site, acting as the central point of contact for administrative support across the project while also overseeing the day-to-day operations of the site office. Key responsibilities will include: Providing comprehensive administrative support to the project team Managing and coordinating site office activities Maintaining effective document control procedures Ensuring all project documentation is accurately filed within relevant IT systems Adhering to established indexing and document naming protocols The ideal candidate will have strong organisational skills, attention to detail, and prior experience in document control within a construction or civil engineering environment. Rate: 17.50 per hour (PAYE) - 22.50 per hour Candidates whose expectations fall outside of this rate band are still encouraged to apply and may be submitted for client review.
Mar 21, 2026
Seasonal
Document Controller / Office Manager We are seeking a highly organised and proactive Document Controller / Office Manager for an ongoing placement supporting the next phase of civil engineering works in Fawley, Southampton. This is a hybrid role based primarily on site, acting as the central point of contact for administrative support across the project while also overseeing the day-to-day operations of the site office. Key responsibilities will include: Providing comprehensive administrative support to the project team Managing and coordinating site office activities Maintaining effective document control procedures Ensuring all project documentation is accurately filed within relevant IT systems Adhering to established indexing and document naming protocols The ideal candidate will have strong organisational skills, attention to detail, and prior experience in document control within a construction or civil engineering environment. Rate: 17.50 per hour (PAYE) - 22.50 per hour Candidates whose expectations fall outside of this rate band are still encouraged to apply and may be submitted for client review.
Commercial Gas Engineer required to join a class leading Boiler Manufacturer. to £47k plus fantastic benefits package, to be based in the Northampton and surrounding area. No Call out. Our client has been established for 60+ years and is a leading Manufacturer of Steam and Electrical Boilers covering the UK and Europe. Due to a member of staff retiring and ongoing contract awards they are now looking for an experienced Commercial Gas Engineer who ideally has a background with Steam Boilers in an Industrial environment, preferably with some Electrical and controls capabilities. Type of sites Covering a number of industrial sites such as Hospitals, Large Commercial Buildings, Pharmaceutical and food manufacturers to name but a few. Location The majority of the work will be in surrounding Northampton area, all generally within an hours travel of the Engineers base. Requirements Experienced Commercial Gas Engineer / Industrial ideally with some Steam Boiler background having worked in similar environments. Experience in fault finding, strip downs, re-builds, maintenance and commissioning of Boiler systems to 1.5Mw. Some familarity with manufacturers such as Weishaupt, Cochrane, Byworth etc beneficial although full training will be offered on own brand. GAS SAFE - CODNCO1 / COCN1, CORT1, CIGA, ICPN1, TCP1, CONGLP1PD, BMP1CDGA Additional experience with Water heaters, Steam (perhaps to have BOAS), some experience with Controls and Electrical qualificiations would be beneficial. UK Driving license Salary and Benefits Basic salary around £47k plus £2k after probation Overtime available at time and a half / double time etc Door to Door travel is paid No On Call rota. 25 days holiday, rises with term of service, plus statutory 8 bank holidays Christmas Shut down (company closes between Christmas and New Year) 3% employee, 7% pension contribution from company Private healthcare Death In service Critical Illness cover Monthly food subsidence Company Van, phone, tablet, Company Credit card for parking etc provided Large emphasis on OEM Training and development on own products and other manufacturers with a personal development programme. This company prides itself on family values, a work life balance, long term staff retention and opportunities to grow a steady career path with ongoing training and development. For more information on this great opportunity please get in touch with Steve West
Mar 21, 2026
Full time
Commercial Gas Engineer required to join a class leading Boiler Manufacturer. to £47k plus fantastic benefits package, to be based in the Northampton and surrounding area. No Call out. Our client has been established for 60+ years and is a leading Manufacturer of Steam and Electrical Boilers covering the UK and Europe. Due to a member of staff retiring and ongoing contract awards they are now looking for an experienced Commercial Gas Engineer who ideally has a background with Steam Boilers in an Industrial environment, preferably with some Electrical and controls capabilities. Type of sites Covering a number of industrial sites such as Hospitals, Large Commercial Buildings, Pharmaceutical and food manufacturers to name but a few. Location The majority of the work will be in surrounding Northampton area, all generally within an hours travel of the Engineers base. Requirements Experienced Commercial Gas Engineer / Industrial ideally with some Steam Boiler background having worked in similar environments. Experience in fault finding, strip downs, re-builds, maintenance and commissioning of Boiler systems to 1.5Mw. Some familarity with manufacturers such as Weishaupt, Cochrane, Byworth etc beneficial although full training will be offered on own brand. GAS SAFE - CODNCO1 / COCN1, CORT1, CIGA, ICPN1, TCP1, CONGLP1PD, BMP1CDGA Additional experience with Water heaters, Steam (perhaps to have BOAS), some experience with Controls and Electrical qualificiations would be beneficial. UK Driving license Salary and Benefits Basic salary around £47k plus £2k after probation Overtime available at time and a half / double time etc Door to Door travel is paid No On Call rota. 25 days holiday, rises with term of service, plus statutory 8 bank holidays Christmas Shut down (company closes between Christmas and New Year) 3% employee, 7% pension contribution from company Private healthcare Death In service Critical Illness cover Monthly food subsidence Company Van, phone, tablet, Company Credit card for parking etc provided Large emphasis on OEM Training and development on own products and other manufacturers with a personal development programme. This company prides itself on family values, a work life balance, long term staff retention and opportunities to grow a steady career path with ongoing training and development. For more information on this great opportunity please get in touch with Steve West
Quality Assurance Assistant Oldham Mon-Fri 7:45 am and 5:00pm (flexi start time) Quality Assurance Assistant The Role This position is working for a leading manufacture in the aerospace sector. You will be dealing with customer complaints as well as assisting with the following: NCRs, CAPAs, KPIs, Calibrations. Quality Assurance Assistant Main Responsibilities • Maintain and update quality documentation, including logging and updating the status of complaints. • Enter and manage data in quality databases and spreadsheets. • Prepare and issue KPI summaries for management review. • Assist in the control of non-conformance reports (NCRs), corrective actions (CAPAs), and improvement logs. • Support internal and external audits by organising online files and ensuring record completeness. • Track and schedule equipment calibrations, ensuring all tools remain within calibration. • Coordinate and maintain document control system (ie training records, document reviews, and revision control for procedures and work instructions). • Communicate with production, engineering and suppliers to resolve documentation or quality data queries. • Provide general administrative support to the QHSE Manager and Quality Inspectors as required. Quality Assurance Assistant The Candidate • Experience of working in a Manufacturing environment is preferred so there is a solid understanding and awareness of the process flow from raw materials to finished products ( including procurement, planning and production, quality testing through to packaging and distribution). • Strong administrative and organisational skills. • Excellent attention to detail and accuracy. • Confident user of Microsoft Excel, Word, and Outlook; experience with databases or QMS software essential. • Ability to manipulate and analyse data is essential • Clear written and verbal communication. • Able to prioritise and handle multiple tasks in a busy manufacturing environment. • Ideally have an understanding of AS / EN 9100 and / or AS / EN 9120 principles or similar quality systems. • Previous experience in an administrative or quality support role within a manufacturing or engineering company. • Knowledge of quality documentation, auditing, or compliance desirable. INDAB
Mar 21, 2026
Full time
Quality Assurance Assistant Oldham Mon-Fri 7:45 am and 5:00pm (flexi start time) Quality Assurance Assistant The Role This position is working for a leading manufacture in the aerospace sector. You will be dealing with customer complaints as well as assisting with the following: NCRs, CAPAs, KPIs, Calibrations. Quality Assurance Assistant Main Responsibilities • Maintain and update quality documentation, including logging and updating the status of complaints. • Enter and manage data in quality databases and spreadsheets. • Prepare and issue KPI summaries for management review. • Assist in the control of non-conformance reports (NCRs), corrective actions (CAPAs), and improvement logs. • Support internal and external audits by organising online files and ensuring record completeness. • Track and schedule equipment calibrations, ensuring all tools remain within calibration. • Coordinate and maintain document control system (ie training records, document reviews, and revision control for procedures and work instructions). • Communicate with production, engineering and suppliers to resolve documentation or quality data queries. • Provide general administrative support to the QHSE Manager and Quality Inspectors as required. Quality Assurance Assistant The Candidate • Experience of working in a Manufacturing environment is preferred so there is a solid understanding and awareness of the process flow from raw materials to finished products ( including procurement, planning and production, quality testing through to packaging and distribution). • Strong administrative and organisational skills. • Excellent attention to detail and accuracy. • Confident user of Microsoft Excel, Word, and Outlook; experience with databases or QMS software essential. • Ability to manipulate and analyse data is essential • Clear written and verbal communication. • Able to prioritise and handle multiple tasks in a busy manufacturing environment. • Ideally have an understanding of AS / EN 9100 and / or AS / EN 9120 principles or similar quality systems. • Previous experience in an administrative or quality support role within a manufacturing or engineering company. • Knowledge of quality documentation, auditing, or compliance desirable. INDAB
