Our client is a successful and well-established automotive company that is going from strength to strength. They are looking for an experienced and skilled Panel Beater / MET Technician to join their team. You will ensure the repair of motor vehicles of all types is carried out to motor manufacturer industry standards or repair methods. Salary: Circa £55,000 depending on experience + Bonus (Higher salary may be available for very experienced individuals - up to £60,000) Hours of work (to be confirmed): 8:00am 5:30pm, Monday to Friday, possibly 1 Saturday a month if targets not hit. PLEASE ONLY APPLY IF YOU HAVE THE FOLLOWING EXPERIENCE: Previous recent experience as a Panel Beater, including welding Current AOM009 welding certificate, or BS equivalent Training in MIG braze, spot welding, rivet and bonding, high strength and Boron steel awareness Motor manufacturer s qualifications and experience Light MET qualification linked to ATA Bonding certification Full UK Driving licence Responsibilities include: Strip & refit where necessary including adjustment and panel alignment. Report any defects or damage linked to associated job but not down for repair. Observe, recognise and report on vehicle structure and paintwork. Ensure that vehicles comply with safety standards when returned to customers, or that faults have been reported and noted on the job card. Removal and safe storage of vehicle components, fluids and gases as directed. Removal and safe disposal of vehicle components and fluids as directed. Quality control of all repairs, with final stage sign off. Report all faults, defects noticed whilst working on vehicles not apparent before dismantling. Actively make sure the repair method is in the job pack and is fully read, understood (e-scribe, manufacturer or other source) and displayed with the vehicle at all times. It is also your duty to sign off the Quality Control section of the Repair Inspection sheet at your and other operatives relevant repair stage. Ensure seat covers & foot mats are in place on all vehicles being worked on and soft top vehicles are protected. Panel alignment and adjacent components. Filler repairs & finished correctly in P180 and pinholes are checked. Underseal, weld through primers, anti-corrosion measures are complete before next stage. Benefits include, but are not limited to: Healthcare Cash Plan (including Gym and shopping discounts) Life Assurance Equipment purchase Scheme Celebration Day (to use as you wish to celebrate a significant day in your life) Car Insurance discount Employee Pension Cycle to Work Scheme Refer a Friend Scheme (earn £1,000 for referring people to join the team) This job will suit someone who has extensive experience as a Panel Beater or is skilled in Panel Beating, any additional automotive bodywork related background would be an advantage. Previous job titles could include; MET Technician / Panel Technician / Coach Builder / Vehicle Assembler / Vehicle Assembly Operative / Paint Sprayer / Vinyl Wrapper / Vinyl Wrapping Operative / Bodywork Technician / Vehicle Damage Panel Technician / Automotive Body Repairer / Body Shop Technician / Auto Body Technician / Motor Vehicle Body Repairer / Smash Repairer / Collision Repair Technician / Body Repair & Fit / Strip Fitter / Body-line Finisher / Dent Remover / Vehicle Welder / etc.
Apr 16, 2026
Full time
Our client is a successful and well-established automotive company that is going from strength to strength. They are looking for an experienced and skilled Panel Beater / MET Technician to join their team. You will ensure the repair of motor vehicles of all types is carried out to motor manufacturer industry standards or repair methods. Salary: Circa £55,000 depending on experience + Bonus (Higher salary may be available for very experienced individuals - up to £60,000) Hours of work (to be confirmed): 8:00am 5:30pm, Monday to Friday, possibly 1 Saturday a month if targets not hit. PLEASE ONLY APPLY IF YOU HAVE THE FOLLOWING EXPERIENCE: Previous recent experience as a Panel Beater, including welding Current AOM009 welding certificate, or BS equivalent Training in MIG braze, spot welding, rivet and bonding, high strength and Boron steel awareness Motor manufacturer s qualifications and experience Light MET qualification linked to ATA Bonding certification Full UK Driving licence Responsibilities include: Strip & refit where necessary including adjustment and panel alignment. Report any defects or damage linked to associated job but not down for repair. Observe, recognise and report on vehicle structure and paintwork. Ensure that vehicles comply with safety standards when returned to customers, or that faults have been reported and noted on the job card. Removal and safe storage of vehicle components, fluids and gases as directed. Removal and safe disposal of vehicle components and fluids as directed. Quality control of all repairs, with final stage sign off. Report all faults, defects noticed whilst working on vehicles not apparent before dismantling. Actively make sure the repair method is in the job pack and is fully read, understood (e-scribe, manufacturer or other source) and displayed with the vehicle at all times. It is also your duty to sign off the Quality Control section of the Repair Inspection sheet at your and other operatives relevant repair stage. Ensure seat covers & foot mats are in place on all vehicles being worked on and soft top vehicles are protected. Panel alignment and adjacent components. Filler repairs & finished correctly in P180 and pinholes are checked. Underseal, weld through primers, anti-corrosion measures are complete before next stage. Benefits include, but are not limited to: Healthcare Cash Plan (including Gym and shopping discounts) Life Assurance Equipment purchase Scheme Celebration Day (to use as you wish to celebrate a significant day in your life) Car Insurance discount Employee Pension Cycle to Work Scheme Refer a Friend Scheme (earn £1,000 for referring people to join the team) This job will suit someone who has extensive experience as a Panel Beater or is skilled in Panel Beating, any additional automotive bodywork related background would be an advantage. Previous job titles could include; MET Technician / Panel Technician / Coach Builder / Vehicle Assembler / Vehicle Assembly Operative / Paint Sprayer / Vinyl Wrapper / Vinyl Wrapping Operative / Bodywork Technician / Vehicle Damage Panel Technician / Automotive Body Repairer / Body Shop Technician / Auto Body Technician / Motor Vehicle Body Repairer / Smash Repairer / Collision Repair Technician / Body Repair & Fit / Strip Fitter / Body-line Finisher / Dent Remover / Vehicle Welder / etc.
Are you an experienced wrapper who s tired of rushed jobs, poor workshop conditions, or being held back by a team that doesn't care about the details as much as you do? Maybe you re the "go-to" person for the tricky recesses and complex curves, but you re looking for a business that actually values quality over shortcuts. We are recruiting for a specialist branding firm that sets the standard in high-end vehicle wraps and fleet graphics. They don t just "get it on the van" they deliver a factory-level finish. We are looking for a confident, detail-driven professional who wants to own their role in a purpose-built, temperature-controlled environment. Why This Role? T his isn t just a job change; it s a move to a business that respects your expertise. Our client provides the high-end setup and the high-profile projects; you provide the standard. The Environment: Work from a purpose-built, temperature-controlled workshop. No more fighting the elements or poor lighting, just the right conditions to do your best work. Trust & Autonomy: This is not a training role. Our client wants someone to come in, take ownership of projects, and set the benchmark for the rest of the installation team. Premium Projects: From high-end vehicle wraps to massive fleet branding and commercial graphics, your work will be seen across the UK. Quality First: The focus here is on precision, post-heating, and durability. You ll have the time and the materials (3M, Arlon, Avery Dennison) to do the job right. What You ll Be Doing: Executing high-quality installations on cars, vans, HGVs, and specialist vehicles to a premier professional standard. Working confidently with cast films, laminates, and architectural graphics. Maintaining absolute excellence in preparation, application, and finishing, ensuring clean edges and zero failures. Identifying potential issues before they become problems and fixing them properly to ensure a durable, long-lasting finish. Working independently in the workshop or heading out on-site nationwide to lead large-scale branding projects. Who You Are: You are already working in the industry and have significant experience as a vehicle wrapper. You have a strong working knowledge of 3M, Arlon, and Avery Dennison materials, understanding their specific properties and application techniques. You re the one who takes genuine pride in your work. You notice the tiny imperfections others miss, and you won t sign off on a job until it s perfect. You want a stable, long-term role where you are recognised as a senior pair of hands. You take feedback well but rarely need it. You hold a full UK Driving Licence and are ready to represent our client professionally on-site when required. Benefits: Overtime available Performance-based bonuses Company pension On-site parking High-quality working environment with proper tools, materials, and processes Consistent workload and long-term job security A company that values quality, accountability, and craftsmanship Due to the high volume of interest we receive for each vacancy, we are only able to contact shortlisted candidates. If you have not heard from our team within 7 days, please consider your application unsuccessful. Please refrain from calling the office to check the status of your application or to discuss the role; this allows us to dedicate our time to the shortlisting process. We will retain your CV on file for future opportunities that may be a match for your skills and experience.
Apr 14, 2026
Full time
Are you an experienced wrapper who s tired of rushed jobs, poor workshop conditions, or being held back by a team that doesn't care about the details as much as you do? Maybe you re the "go-to" person for the tricky recesses and complex curves, but you re looking for a business that actually values quality over shortcuts. We are recruiting for a specialist branding firm that sets the standard in high-end vehicle wraps and fleet graphics. They don t just "get it on the van" they deliver a factory-level finish. We are looking for a confident, detail-driven professional who wants to own their role in a purpose-built, temperature-controlled environment. Why This Role? T his isn t just a job change; it s a move to a business that respects your expertise. Our client provides the high-end setup and the high-profile projects; you provide the standard. The Environment: Work from a purpose-built, temperature-controlled workshop. No more fighting the elements or poor lighting, just the right conditions to do your best work. Trust & Autonomy: This is not a training role. Our client wants someone to come in, take ownership of projects, and set the benchmark for the rest of the installation team. Premium Projects: From high-end vehicle wraps to massive fleet branding and commercial graphics, your work will be seen across the UK. Quality First: The focus here is on precision, post-heating, and durability. You ll have the time and the materials (3M, Arlon, Avery Dennison) to do the job right. What You ll Be Doing: Executing high-quality installations on cars, vans, HGVs, and specialist vehicles to a premier professional standard. Working confidently with cast films, laminates, and architectural graphics. Maintaining absolute excellence in preparation, application, and finishing, ensuring clean edges and zero failures. Identifying potential issues before they become problems and fixing them properly to ensure a durable, long-lasting finish. Working independently in the workshop or heading out on-site nationwide to lead large-scale branding projects. Who You Are: You are already working in the industry and have significant experience as a vehicle wrapper. You have a strong working knowledge of 3M, Arlon, and Avery Dennison materials, understanding their specific properties and application techniques. You re the one who takes genuine pride in your work. You notice the tiny imperfections others miss, and you won t sign off on a job until it s perfect. You want a stable, long-term role where you are recognised as a senior pair of hands. You take feedback well but rarely need it. You hold a full UK Driving Licence and are ready to represent our client professionally on-site when required. Benefits: Overtime available Performance-based bonuses Company pension On-site parking High-quality working environment with proper tools, materials, and processes Consistent workload and long-term job security A company that values quality, accountability, and craftsmanship Due to the high volume of interest we receive for each vacancy, we are only able to contact shortlisted candidates. If you have not heard from our team within 7 days, please consider your application unsuccessful. Please refrain from calling the office to check the status of your application or to discuss the role; this allows us to dedicate our time to the shortlisting process. We will retain your CV on file for future opportunities that may be a match for your skills and experience.
Vehicle Wrapper 30,000 - 34,000 DOE, permanent contract, 40 hours a week, overtime paid at x1.5, 28 days holiday, This Vehicle Wrapper role offers the chance to join an established and growing modification business, working on high-quality fleet livery and full vinyl wraps in a professional workshop environment. With ongoing training and development, this is a strong opportunity for an experienced installer seeking long-term stability. We are looking to recruit an experienced Vehicle Wrapper with at least two years of hands-on experience in vinyl installation or wrapping. This opportunity would suit someone from a sign manufacturing or graphics production background who takes pride in high standards and can work both independently and within a team. As a Vehicle Wrapper, you will be responsible for preparing, producing, and fitting graphics across a wide range of projects. You will join a skilled team, receive full product training, and contribute to consistent, high-quality output. Key Responsibilities of the Vehicle Wrapper position Prepare graphics and wraps including printing, plotting, weeding, taping, and laminating Fit vinyl and digital prints to various substrates Prepare surfaces including cleaning and trim removal Apply calendared, polymeric, and cast vinyl Complete repairs and installations to a professional finish Work independently and within a close-knit team Support occasional offsite work and overnight stays We would welcome people to apply who have: Minimum two years of experience in vinyl installation or wrapping Confident applying a variety of vinyl materials Strong attention to detail and quality Comfortable working in a workshop environment Flexible approach to working hours Must have the right to work in the UK If you would like a private chat about the role before applying, please contact Rodger Morley at E3 Recruitment
Apr 12, 2026
Full time
Vehicle Wrapper 30,000 - 34,000 DOE, permanent contract, 40 hours a week, overtime paid at x1.5, 28 days holiday, This Vehicle Wrapper role offers the chance to join an established and growing modification business, working on high-quality fleet livery and full vinyl wraps in a professional workshop environment. With ongoing training and development, this is a strong opportunity for an experienced installer seeking long-term stability. We are looking to recruit an experienced Vehicle Wrapper with at least two years of hands-on experience in vinyl installation or wrapping. This opportunity would suit someone from a sign manufacturing or graphics production background who takes pride in high standards and can work both independently and within a team. As a Vehicle Wrapper, you will be responsible for preparing, producing, and fitting graphics across a wide range of projects. You will join a skilled team, receive full product training, and contribute to consistent, high-quality output. Key Responsibilities of the Vehicle Wrapper position Prepare graphics and wraps including printing, plotting, weeding, taping, and laminating Fit vinyl and digital prints to various substrates Prepare surfaces including cleaning and trim removal Apply calendared, polymeric, and cast vinyl Complete repairs and installations to a professional finish Work independently and within a close-knit team Support occasional offsite work and overnight stays We would welcome people to apply who have: Minimum two years of experience in vinyl installation or wrapping Confident applying a variety of vinyl materials Strong attention to detail and quality Comfortable working in a workshop environment Flexible approach to working hours Must have the right to work in the UK If you would like a private chat about the role before applying, please contact Rodger Morley at E3 Recruitment
GBR Recruitment Ltd, are working exclusively with a one of the UK s well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company s Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC s). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
Apr 10, 2026
Full time
GBR Recruitment Ltd, are working exclusively with a one of the UK s well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company s Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC s). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
GBR Recruitment Ltd, are working exclusively with a one of the UK s well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company s Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC s). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
Apr 10, 2026
Full time
GBR Recruitment Ltd, are working exclusively with a one of the UK s well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company s Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC s). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
GBR Recruitment Ltd, are working exclusively with a one of the UK's well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company's Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC's). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations - must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
Apr 09, 2026
Full time
GBR Recruitment Ltd, are working exclusively with a one of the UK's well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company's Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC's). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations - must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
GBR Recruitment Ltd, are working exclusively with a one of the UK's well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company's Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC's). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations - must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
Apr 09, 2026
Full time
GBR Recruitment Ltd, are working exclusively with a one of the UK's well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company's Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC's). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations - must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
GBR Recruitment Ltd, are working exclusively with a one of the UK's well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company's Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC's). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations - must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
Apr 09, 2026
Full time
GBR Recruitment Ltd, are working exclusively with a one of the UK's well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company's Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC's). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations - must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
GBR Recruitment Ltd, are working exclusively with a one of the UK's well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company's Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC's). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations - must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
Apr 09, 2026
Full time
GBR Recruitment Ltd, are working exclusively with a one of the UK's well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company's Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC's). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations - must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
GBR Recruitment Ltd, are working exclusively with a one of the UK's well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company's Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC's). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations - must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
Apr 09, 2026
Full time
GBR Recruitment Ltd, are working exclusively with a one of the UK's well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company's Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC's). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations - must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
GBR Recruitment Ltd, are working exclusively with a one of the UK's well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company's Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC's). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations - must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
Apr 09, 2026
Full time
GBR Recruitment Ltd, are working exclusively with a one of the UK's well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company's Field Service Engineer, you will work with both SME & Major National clients , working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC's). You will get to test your engineering skills across an array of differing machinery , from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based , so flexibility is required. Duties: Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming) Troubleshooting electrical & mechanical faults, replacing parts & components Proactively managing scheduled maintenance of machines Liaising with customers on-site to ensure smooth handover & ongoing technical support Training customers to use the machinery & to get the optimal usage out of the machines Maintaining accurate service records & updating maintenance logs Setting up machinery for demonstrations to customers & potential customers Attributes: A time served multi-skilled Engineer from the packaging / print machinery industry Level 3 NVQ in Electrical Engineering or equivalent Experienced in working with 3 phase electrical power supplies is imperative 18th Edition wiring regulations - must be able to read wiring diagrams Strong Mechanical Engineering skills Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable PLC knowledge (not a programmer) Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience Machine setting & operating skills Happy to work field based covering the UK & also in the workshop Used to giving technical advice to clients, as well as operator training Able to communicate effectively & professionally at all levels Occasional overseas travel to Europe for machine training and line approvals Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start
NEW VACANCY (SN7263) VEHICLE WRAPPER COUNTY DURHAM / NORTH YORKSHIRE Up to 18 per hour DOE + performance bonus and bonus scheme + bereavement leave + company pension + subsidised travel + free on-site parking Hours: 8:30am to 4:30pm Monday to Friday Our client is a successful signage and graphics company based in the North East. Celebrating 10 years in business, the company employs 15 staff and serves over 250 clients. They are known for looking after their team while consistently delivering excellent service to their customers. The company operates from a 12,000 sq. ft. modern facility, fully equipped with all the machinery and resources needed to deliver high-quality signage and vehicle graphics services. The Role The client is seeking an experienced Vehicle Wrapper to join their team. The successful candidate will be responsible for the application of vinyl wraps and graphics on a variety of vehicles, ensuring the highest standards of quality and customer satisfaction. Key Responsibilities: Prepare vehicles for wrapping, including cleaning, removing parts as required, and ensuring surfaces are ready for application. Accurately measure and cut vinyl wrap material to achieve a perfect fit. Apply vinyl wraps and graphics to vehicles, ensuring a smooth, bubble-free finish. Work with a diverse range of vehicles, including cars, trucks, vans, and machinery. Collaborate with the design team to execute projects according to client specifications. Maintain a clean and organised workspace, caring for tools and materials. Keep up-to-date with the latest vehicle wrapping techniques and trends. Deliver exceptional customer service, ensuring complete client satisfaction. Candidate Requirements: Minimum of 2 years' experience as a Vehicle Wrapper or in a similar role within the automotive/graphics industry. Exceptional attention to detail with a high standard of workmanship. Experience working with various materials and adhesives. Strong time management skills and ability to meet deadlines. Excellent communication and interpersonal skills. Positive attitude and the ability to work effectively within a team. What the Company Offers: Competitive salary and benefits package. Opportunities for professional growth and development. A creative and supportive work environment. Exposure to a wide range of exciting projects with a talented team. Experience Required: Vehicle Wrapping: 2 years (required) To apply for the role please send a copy of your CV
Oct 08, 2025
Full time
NEW VACANCY (SN7263) VEHICLE WRAPPER COUNTY DURHAM / NORTH YORKSHIRE Up to 18 per hour DOE + performance bonus and bonus scheme + bereavement leave + company pension + subsidised travel + free on-site parking Hours: 8:30am to 4:30pm Monday to Friday Our client is a successful signage and graphics company based in the North East. Celebrating 10 years in business, the company employs 15 staff and serves over 250 clients. They are known for looking after their team while consistently delivering excellent service to their customers. The company operates from a 12,000 sq. ft. modern facility, fully equipped with all the machinery and resources needed to deliver high-quality signage and vehicle graphics services. The Role The client is seeking an experienced Vehicle Wrapper to join their team. The successful candidate will be responsible for the application of vinyl wraps and graphics on a variety of vehicles, ensuring the highest standards of quality and customer satisfaction. Key Responsibilities: Prepare vehicles for wrapping, including cleaning, removing parts as required, and ensuring surfaces are ready for application. Accurately measure and cut vinyl wrap material to achieve a perfect fit. Apply vinyl wraps and graphics to vehicles, ensuring a smooth, bubble-free finish. Work with a diverse range of vehicles, including cars, trucks, vans, and machinery. Collaborate with the design team to execute projects according to client specifications. Maintain a clean and organised workspace, caring for tools and materials. Keep up-to-date with the latest vehicle wrapping techniques and trends. Deliver exceptional customer service, ensuring complete client satisfaction. Candidate Requirements: Minimum of 2 years' experience as a Vehicle Wrapper or in a similar role within the automotive/graphics industry. Exceptional attention to detail with a high standard of workmanship. Experience working with various materials and adhesives. Strong time management skills and ability to meet deadlines. Excellent communication and interpersonal skills. Positive attitude and the ability to work effectively within a team. What the Company Offers: Competitive salary and benefits package. Opportunities for professional growth and development. A creative and supportive work environment. Exposure to a wide range of exciting projects with a talented team. Experience Required: Vehicle Wrapping: 2 years (required) To apply for the role please send a copy of your CV
About you You understand that vinyl wrapping is a skilled craft, not just putting stickers on vehicles. You take pride in your work, have a strong eye for detail and thrive in an environment where quality and precision matter. You are reliable, hands-on and committed to doing the job properly from start to finish. Your experience You have solid experience as a Vehicle Wrapper or Installer and a proven track record of delivering high-quality wraps. You are confident with the technical aspects as well as the application and have worked on a range of vehicles including cars, vans, buses and lorries. You are used to working in a busy environment and can get up to speed quickly. What you will be doing with your experience in this role You will be responsible for wrapping a wide variety of vehicles, from cars and vans through to larger fleets and specialist projects. You will work to exact specifications, ensure a flawless finish and contribute to maintaining the company s reputation for excellent workmanship. This is a fast-paced environment with plenty of ongoing projects, so you will always be busy and challenged. About the business This is a growing and ambitious vehicle branding and graphics company with a strong reputation for quality. The culture is hands-on and collaborative, with everyone working together to achieve the best results for clients. Next steps If you are an experienced vehicle wrapper looking for a new opportunity in a thriving business, we would love to hear from you. Send your application today and let s start the conversation.
Sep 22, 2025
Full time
About you You understand that vinyl wrapping is a skilled craft, not just putting stickers on vehicles. You take pride in your work, have a strong eye for detail and thrive in an environment where quality and precision matter. You are reliable, hands-on and committed to doing the job properly from start to finish. Your experience You have solid experience as a Vehicle Wrapper or Installer and a proven track record of delivering high-quality wraps. You are confident with the technical aspects as well as the application and have worked on a range of vehicles including cars, vans, buses and lorries. You are used to working in a busy environment and can get up to speed quickly. What you will be doing with your experience in this role You will be responsible for wrapping a wide variety of vehicles, from cars and vans through to larger fleets and specialist projects. You will work to exact specifications, ensure a flawless finish and contribute to maintaining the company s reputation for excellent workmanship. This is a fast-paced environment with plenty of ongoing projects, so you will always be busy and challenged. About the business This is a growing and ambitious vehicle branding and graphics company with a strong reputation for quality. The culture is hands-on and collaborative, with everyone working together to achieve the best results for clients. Next steps If you are an experienced vehicle wrapper looking for a new opportunity in a thriving business, we would love to hear from you. Send your application today and let s start the conversation.
