Apply Now Attachment Fitter require Harpenden The Staffing Network are seeking a skilled and motivated Hydraulic Attachments Fitter to join our clients Machinery and Plant hire division in their Harpenden Depot The successful candidate will be responsible for the installation, maintenance, and repair of hydraulic attachments used on various heavy machinery and construction equipment. This will be a role that will also involve Delivering/Collecting and attaching/detaching attachments to/from machinery on site. Key Responsibilities: Deliver/Collect, Install, assemble, and fit hydraulic attachments to/from heavy machinery. PDI and inspect Machines and Attachments to make sure they are fit for purpose. Conduct routine maintenance and troubleshooting on hydraulic systems. Diagnose faults and carry out necessary repairs efficiently. Ensure all hydraulic components meet safety and quality standards. Maintain accurate records of work completed and parts used. Collaborate with engineering teams to optimise hydraulic performance. Ensure compliance with health and safety regulations at all times. Qualifications and Skills : Proven experience in hydraulic systems, fitting, and maintenance. Strong understanding of hydraulic schematics and technical drawings. Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a team. Strong communication skills, both verbal and written. A valid UK driving licence. Desirable: Experience with construction or agricultural machinery. Certification in hydraulic safety and maintenance. Working Conditions: Workshop and on-site environments. May involve physical lifting and working in confined spaces. Occasional overtime and travel as required. From 15.00/16.00 per hour dependant on experience Permanent vacancy for the right candidate
Apr 15, 2026
Full time
Apply Now Attachment Fitter require Harpenden The Staffing Network are seeking a skilled and motivated Hydraulic Attachments Fitter to join our clients Machinery and Plant hire division in their Harpenden Depot The successful candidate will be responsible for the installation, maintenance, and repair of hydraulic attachments used on various heavy machinery and construction equipment. This will be a role that will also involve Delivering/Collecting and attaching/detaching attachments to/from machinery on site. Key Responsibilities: Deliver/Collect, Install, assemble, and fit hydraulic attachments to/from heavy machinery. PDI and inspect Machines and Attachments to make sure they are fit for purpose. Conduct routine maintenance and troubleshooting on hydraulic systems. Diagnose faults and carry out necessary repairs efficiently. Ensure all hydraulic components meet safety and quality standards. Maintain accurate records of work completed and parts used. Collaborate with engineering teams to optimise hydraulic performance. Ensure compliance with health and safety regulations at all times. Qualifications and Skills : Proven experience in hydraulic systems, fitting, and maintenance. Strong understanding of hydraulic schematics and technical drawings. Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a team. Strong communication skills, both verbal and written. A valid UK driving licence. Desirable: Experience with construction or agricultural machinery. Certification in hydraulic safety and maintenance. Working Conditions: Workshop and on-site environments. May involve physical lifting and working in confined spaces. Occasional overtime and travel as required. From 15.00/16.00 per hour dependant on experience Permanent vacancy for the right candidate
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
Apr 14, 2026
Full time
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
Apr 14, 2026
Full time
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
Apr 14, 2026
Full time
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
Apr 14, 2026
Full time
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
Apr 14, 2026
Full time
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
Apr 14, 2026
Full time
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
Apr 14, 2026
Full time
GBR Recruitment Ltd are delighted to be working exclusively with a leading specialist vehicle company (high capital machines) that provides vehicles across varying industry sectors for varying works. They are recruiting for an experienced Workshop Manager who is highly process driven to successfully & efficiently lead a workshop / vehicle build & body work team of x10 Engineers & Semi-skilled Fitters. A key SMT level role delivering high quality, high value machinery solutions to the end using clients OTIF & to the specifications required for them to carry out their day to day tasks. Ideally you will be an experienced Workshop Manager who is or has worked within Agriculture (Tractors, Combines, Telehandlers etc.), Construction Plant Machinery (Diggers, Vehicle Mounted Cranes / MEWPS, Dump Trucks, Concrete Mixers, Wheel Loaders or similar), HGV's (Tipper Lorries, Rear Steer Multi-Axle Specialist Trailers, Road Sweepers, Gritters) or other specialist vehicles / mobile machinery. You will have also led fully body builds or partial body builds (from chassis upwards on an assembly line), managed machinery modifications & refurbishments, mounted attachment assembly / fittings, servicing & repairs. Duties: Management of all workshop activities & all staff (Vehicle Engineers, Technician & Fitters) Detailed planning of all specialist vehicle build & repair projects OTIF completion & delivery of all products supplied by the business Estimating & quote preparation for vehicle refurbishment projects Costs control & Budget control of all vehicle / machinery build projects Detailed record keeping & reporting Managing all H&S relating to the workshops & yard Stock control (chassis availability, spare parts, components & auxiliaries) Lead the team to achieve set build time targets Work on improving build efficiency Manage, mentor, develop & further train / cross train the Engineering team, in order to drive the quality of service delivery Communicate with Sales office regarding timelines & job completion Control of workshop bookings & the allocation of staff & space availability Implement new systems & procedures (CI & LEAN methodology) Take responsibility for Quality of work & QMS within the workshop Liaise with Sales Department to ensure customer expectations are met Attributes: Workshop Management background in one of the listed sectors / product ranges above (high capital mobile machinery) Overseen teams of 5-10 (Engineers, Technicians, Parts etc.) Strong automotive body building / body shop experience is ideal Strong hydraulics, pneumatic & vehicle electric experience would be ideal Mechanical Engineering experience Strong in rolling out new processes & procedures Passionate about driving leaner smarter ways of working & CI methodologies, plus quality focused delivering products OTIF Flexible with start & finish times This role is commutable from Peterborough, Huntingdon, Stamford, Oundle, Corby, Kettering, Cambridge, Northampton, Leicester, Lincoln, Newark, Spalding, Sleaford, Boston, Wisbech, Bourne & other areas close to these Interviews to take place immediately (2 stage interview process) Apply today!
Our client is a well established and successful company. They are looking for an experienced Workshop Generator Engineer / PSU Service Engineer to join their team. This is a site based role. PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING CRITERIA: You have several years experience of servicing Generators / Power Supplies (PSU) Solid mechanical aptitude Knowledge of engines, alternators, control panels and wiring diagrams Diagnostic and leadership skills able to work in a team or alone Proficiency with MS Office Ability to work without supervision Salary and other benefits: Salary: £17.00 - £19.00 per hour + Overtime, paid at time and a half + Many benefits. Positive Feedback incentive, 5 pieces of positive feedback will give you a £25.00 Amazon voucher. Employees employee Yearly nominations with £1000 for the winner, £500 for second, £250 for third. Hours of work: 40 hours a week. Job Description Working out of the depot and being responsible for all aspects of power products/ generator preparation, delivering quality and ensuring that the generators dispatched are to the correct specification. The role involves preparing power products/generators for dispatch (PDI), fitment of attachment/kits, unit movement recording, setting up the generators via computer and ensuring the depot area that you work in is kept in a clean and presentable manner. There will also be the requirement to fix and repair generators that break down in the field and are transported back to the depot for repair. Key Responsibilities: To provide support to a range of machinery with a primary focus on keeping the machinery in peak operating condition through scheduled maintenance, repairs and inspections. Sole responsibility for ensuring PDI work is carried out to the required standard and timeframe of all the power products/generators. Fitting attachments/extras to generators as per sales request Lifting and moving of power products inside and outside of the workshop. Maintain the depot areas you work in, keeping it in a clean and presentable manner at all times. Investigate, diagnose and resolve reports of technical problems with power products General Engineering duties which include working at height, beneath and within all power products Repairing and maintaining power products Servicing of a variety of power products within the workshop Ability to work independently to troubleshoot and solve problems. Complete job cards to a high standard promptly and within a given timeframe. Complete paperwork and timesheets in a timely manner. Request parts efficiently and effectively Electrically and mechanically qualified Be able to do mechanical and electrical fault finding Develop and maintain good working relationships with internal and external customers Ensure compliance with relevant procedures when repairing and inspecting equipment Ensure work/personal equipment complies with all safety standards This role would suit someone with previous experience in a similar role, such as a Generator Service Technician / Generator Mechanic / Generator Service Engineer / PSU Engineer / PSU Mechanic / PSU Technician / Service Technician / Mechanical Fitter / Plant Fitter / Power Supply Unit Engineer / etc.
Apr 10, 2026
Full time
Our client is a well established and successful company. They are looking for an experienced Workshop Generator Engineer / PSU Service Engineer to join their team. This is a site based role. PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING CRITERIA: You have several years experience of servicing Generators / Power Supplies (PSU) Solid mechanical aptitude Knowledge of engines, alternators, control panels and wiring diagrams Diagnostic and leadership skills able to work in a team or alone Proficiency with MS Office Ability to work without supervision Salary and other benefits: Salary: £17.00 - £19.00 per hour + Overtime, paid at time and a half + Many benefits. Positive Feedback incentive, 5 pieces of positive feedback will give you a £25.00 Amazon voucher. Employees employee Yearly nominations with £1000 for the winner, £500 for second, £250 for third. Hours of work: 40 hours a week. Job Description Working out of the depot and being responsible for all aspects of power products/ generator preparation, delivering quality and ensuring that the generators dispatched are to the correct specification. The role involves preparing power products/generators for dispatch (PDI), fitment of attachment/kits, unit movement recording, setting up the generators via computer and ensuring the depot area that you work in is kept in a clean and presentable manner. There will also be the requirement to fix and repair generators that break down in the field and are transported back to the depot for repair. Key Responsibilities: To provide support to a range of machinery with a primary focus on keeping the machinery in peak operating condition through scheduled maintenance, repairs and inspections. Sole responsibility for ensuring PDI work is carried out to the required standard and timeframe of all the power products/generators. Fitting attachments/extras to generators as per sales request Lifting and moving of power products inside and outside of the workshop. Maintain the depot areas you work in, keeping it in a clean and presentable manner at all times. Investigate, diagnose and resolve reports of technical problems with power products General Engineering duties which include working at height, beneath and within all power products Repairing and maintaining power products Servicing of a variety of power products within the workshop Ability to work independently to troubleshoot and solve problems. Complete job cards to a high standard promptly and within a given timeframe. Complete paperwork and timesheets in a timely manner. Request parts efficiently and effectively Electrically and mechanically qualified Be able to do mechanical and electrical fault finding Develop and maintain good working relationships with internal and external customers Ensure compliance with relevant procedures when repairing and inspecting equipment Ensure work/personal equipment complies with all safety standards This role would suit someone with previous experience in a similar role, such as a Generator Service Technician / Generator Mechanic / Generator Service Engineer / PSU Engineer / PSU Mechanic / PSU Technician / Service Technician / Mechanical Fitter / Plant Fitter / Power Supply Unit Engineer / etc.
MOBILE FITTER/MECHANIC - Fantastic family run business WEMBLEY - Mobile HIGHLY COMPETITIVE RATE OF UP TO 25 PER HOUR DEPENDING ON EXPERIENCE. PLUS VAN, FUEL CARD ETC. Our client is a leading family run business withing the construction industry who is looking to add a new HGV Mechanic to their expanding team. The role will be based out of their Wembley site. The role of Fitter involves the following tasks. The key responsibilities for the role are: Undertake the correct and regular maintenance and calibration of all equipment in accordance with instructions. Undertake maintenance of fleet as qualified and directed. Provide details of engine hours worked information for each item of plant. Undertake routine testing of safety-critical systems and equipment as directed. Undertake routine inspection of vehicles. Maintain comprehensive records, both electronically and in hard copy, for each vehicle and item of plant and equipment. Maintain and inspect lifting accessories. Provide on-site fitter cover All applicants must: Have HGV experience Have good mechanical engineering skills. Be a qualified or time-served mechanic. Be responsible and accountable. Be methodical and have good attention to detail. Be a good team player. Hold a current driving licence. Be physically fit. The ability to operate machines and attachments and have an awareness of the rules, regulations and requirements that are pertinent to plant and equipment. Should you be interested in this excellent Plant Fitter opportunity, please forward your CV to Anna Maguire.
Oct 05, 2025
Full time
MOBILE FITTER/MECHANIC - Fantastic family run business WEMBLEY - Mobile HIGHLY COMPETITIVE RATE OF UP TO 25 PER HOUR DEPENDING ON EXPERIENCE. PLUS VAN, FUEL CARD ETC. Our client is a leading family run business withing the construction industry who is looking to add a new HGV Mechanic to their expanding team. The role will be based out of their Wembley site. The role of Fitter involves the following tasks. The key responsibilities for the role are: Undertake the correct and regular maintenance and calibration of all equipment in accordance with instructions. Undertake maintenance of fleet as qualified and directed. Provide details of engine hours worked information for each item of plant. Undertake routine testing of safety-critical systems and equipment as directed. Undertake routine inspection of vehicles. Maintain comprehensive records, both electronically and in hard copy, for each vehicle and item of plant and equipment. Maintain and inspect lifting accessories. Provide on-site fitter cover All applicants must: Have HGV experience Have good mechanical engineering skills. Be a qualified or time-served mechanic. Be responsible and accountable. Be methodical and have good attention to detail. Be a good team player. Hold a current driving licence. Be physically fit. The ability to operate machines and attachments and have an awareness of the rules, regulations and requirements that are pertinent to plant and equipment. Should you be interested in this excellent Plant Fitter opportunity, please forward your CV to Anna Maguire.
