Optamor
Ampthill, Bedfordshire
Materials Lab Support Technician QA / Test & Inspection Location: Ampthill, Bedfordshire Contract: Fixed Term (24 months) Salary: 30,000 - 32,000 37.5h, 4 day working week Monday to Thursday About the Role We are seeking a proactive and detail-oriented Materials Lab Support Technician to support the day-to-day operations of our Materials Laboratory. Working alongside a Materials Laboratory Engineer, you will play a key role in preparing test materials, conducting routine analyses, and ensuring the smooth running of laboratory activities. This role is ideal for someone looking to begin a career in a laboratory environment, as full training will be provided for the right candidate. Key Responsibilities Operate, maintain, and perform routine checks on analytical instruments Conduct standard chemical, mechanical, and thermal tests, accurately recording results Carry out visual inspections of product samples, identifying defects and verifying dimensional tolerances Perform basic calculations (e.g. concentrations, percentage deviations) and compile test data Prepare solutions and assist in experimental setup under senior guidance Set up, dismantle, clean, and store laboratory equipment and glassware Manage laboratory consumables, including stock control, distribution, and rotation Maintain a clean, organised, and safety-conscious laboratory environment Perform and document routine calibration checks (daily/weekly) Identify and report non-conformances, supporting investigations and corrective actions Collaborate with internal stakeholders to understand testing priorities Assist with experimental design and data interpretation as required Skills, Qualifications & Experience Essential Strong attention to detail and excellent organisational skills Knowledge of chemical testing. Ability to follow standard operating procedures (SOPs) accurately Basic problem-solving skills and ability to troubleshoot minor issues Good communication skills and ability to work collaboratively Desirable Ability to manage changing priorities in a dynamic environment Experience with SAP or similar systems Continuous improvement mindset with a focus on efficiency and accuracy Logical approach to problem-solving and data interpretation Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call (phone number removed) Disclaimer: This vacancy is being advertised by Optamor Limited. Optamor is a specialist Recruitment Process Outsourcing provider. We provide a flexible full recruitment solution which takes care of all recruitment requirements from planning to on-boarding. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Materials Lab Support Technician QA / Test & Inspection Location: Ampthill, Bedfordshire Contract: Fixed Term (24 months) Salary: 30,000 - 32,000 37.5h, 4 day working week Monday to Thursday About the Role We are seeking a proactive and detail-oriented Materials Lab Support Technician to support the day-to-day operations of our Materials Laboratory. Working alongside a Materials Laboratory Engineer, you will play a key role in preparing test materials, conducting routine analyses, and ensuring the smooth running of laboratory activities. This role is ideal for someone looking to begin a career in a laboratory environment, as full training will be provided for the right candidate. Key Responsibilities Operate, maintain, and perform routine checks on analytical instruments Conduct standard chemical, mechanical, and thermal tests, accurately recording results Carry out visual inspections of product samples, identifying defects and verifying dimensional tolerances Perform basic calculations (e.g. concentrations, percentage deviations) and compile test data Prepare solutions and assist in experimental setup under senior guidance Set up, dismantle, clean, and store laboratory equipment and glassware Manage laboratory consumables, including stock control, distribution, and rotation Maintain a clean, organised, and safety-conscious laboratory environment Perform and document routine calibration checks (daily/weekly) Identify and report non-conformances, supporting investigations and corrective actions Collaborate with internal stakeholders to understand testing priorities Assist with experimental design and data interpretation as required Skills, Qualifications & Experience Essential Strong attention to detail and excellent organisational skills Knowledge of chemical testing. Ability to follow standard operating procedures (SOPs) accurately Basic problem-solving skills and ability to troubleshoot minor issues Good communication skills and ability to work collaboratively Desirable Ability to manage changing priorities in a dynamic environment Experience with SAP or similar systems Continuous improvement mindset with a focus on efficiency and accuracy Logical approach to problem-solving and data interpretation Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call (phone number removed) Disclaimer: This vacancy is being advertised by Optamor Limited. Optamor is a specialist Recruitment Process Outsourcing provider. We provide a flexible full recruitment solution which takes care of all recruitment requirements from planning to on-boarding. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
We Help Recruit
Balderstone, Lancashire
Mechanical Calibration Technician (Airtools) is required for a permanent role for an established global company in the Salmesbury, BB2 area. Competitive salary (DoE) + superb benefits (see below). The Calibration Technician will be working 40 hours (M-F Days) + occasional O/T, applicants must hold a full UK driving licence as they will be required to work in the field and occasionally stay away from home. This is a fantastic opportunity with long-term security, excellent career prospects and training provided for a candidate wishing to develop a career in mechanical calibration. The client will also consider Ex-Forces, and candidates who have may have part completed or recently completed a quality, calibration, electrical or mechanical apprenticeship. This position may also suit a candidate with an interest in mechanics or calibration and with some experience of air tools, torque and or dimensional measuring equipment. Benefits: Competitive salary (DoE) + 26 days hols + B/hols 40 hours per week, 8am 4:30pm + occasional O/T, particularly when working away from home. Company vehicle (after training period), laptop & mobile. In-house and external training provided. Excellent company pension & life assurance schemes. Salary sacrificed heath care scheme and Company sick pay after qualifying period. Perkbox The successful Calibration Technician day to day duties will include: Calibrate and test pneumatic / air tools to traceable standards in lab and at Customers sites within given timeframes. Identify solutions to customer problems and communicate them effectively, such solutions to include but not be limited to advice on calibration cycles, test points and equipment usage. Ensure that customer reports are completed professionally and clearly articulate the outcome and recommendations of any visit. Documenting and inputting data / results onto computer software and producing calibration certs. Ensure that all stock, equipment & tools are kept clean safe, secure and maintained to high level. To undertake and attend training courses necessary to develop and maintain competence to undertake the role. To observe and comply with all Company policies including but not limited to H&S, Car Policy, Expenses, Ethics Policy, IT User policy and all policies and appendices within the Contract of Employment. Flexibility to work approved O/T and work away from home with overnight stays if required. To be suitable for this Calibration Technician role you must have the following experience / skills / characteristics: Experience of using and testing pneumatic and torque tools - Avdel / Cherrymax Bottle, Huck Puller / Swager, nut runner, pin gun, pulse / rivet gun, torque screwdriver, torque wrench etc. To have a basic understanding of the calibration process and laboratory quality systems. 5 GCSE qualifications at grades A-C, or equivalent PC literate in MS Word and Excel. Hardworking, keen to learn, pursue self-development and provide a quality service to customers. Good interpersonal communication skills (verbal & written). Able to work as part of a team or alone with the minimum of supervision. Full UK driving licence (essential, preferably clean) The ideal Calibration Technician will have majority of the following experience / skills / characteristics: Recent experience of calibrating torque and or air tools to in-house, or traceable standards. Relevant mechanical / metrology engineering qualification i.e. HNC, NVQ / BTEC / C&G L3 etc. Time served or completed a relevant mechanical engineering apprenticeship. Mechanical maintenance / mechanical fitting experience. Experience of calibrating mechanical, physical or dimensional equipment. Knowledge of importing / exporting from Excel databases and report generation from databases and calibration software such as Indysoft (desirable) or MetCAL, InGAGE, ProCal, SureCal etc. Previous experience of working in the calibration, aerospace, automotive or manufacturing sectors Key words : Calibration Technician, Calibration, Air Tools, Torque, Airtools, Pneumatic, Aircraft Fitter, Mechanical Assembly, Mechanical Fitting, Car Mechanic, Vehicle Technician, Field Service, Mechanical, Physical, Dimensional, Repair, Maintenance, Torque Screw Driver, Torque Wrench, Torque Wrench Adjustable, Avdel Bottle, Cherrymax Bottle, Huck Puller / Swager, Nut Runner, Pin Gun, Pulse Gun, Inspection, AS 9100, QA, QC, Test and Verification, Test & Measurement, Quality, Aerospace, Automotive, Ex HM Forces, Travel, Full Time, Permanent, Blackburn, Salmesbury, Preston, Lancashire The successful Calibration Technician (Pneumatic / Airtools & Torque) will need to be methodical, numerate, organised, possess good communication skills, PC literate (Outlook, Word & Excel). and flexible as you will be required to work at other sites with overnight stays, work overtime and other duties not mentioned in this job description. You will have the relevant qualifications or experience, be trustworthy, punctual, conscientious, keen and have a practical approach to work. If you are interested in Calibration Technician role and have majority of the required experience, please click the apply now button.
Mechanical Calibration Technician (Airtools) is required for a permanent role for an established global company in the Salmesbury, BB2 area. Competitive salary (DoE) + superb benefits (see below). The Calibration Technician will be working 40 hours (M-F Days) + occasional O/T, applicants must hold a full UK driving licence as they will be required to work in the field and occasionally stay away from home. This is a fantastic opportunity with long-term security, excellent career prospects and training provided for a candidate wishing to develop a career in mechanical calibration. The client will also consider Ex-Forces, and candidates who have may have part completed or recently completed a quality, calibration, electrical or mechanical apprenticeship. This position may also suit a candidate with an interest in mechanics or calibration and with some experience of air tools, torque and or dimensional measuring equipment. Benefits: Competitive salary (DoE) + 26 days hols + B/hols 40 hours per week, 8am 4:30pm + occasional O/T, particularly when working away from home. Company vehicle (after training period), laptop & mobile. In-house and external training provided. Excellent company pension & life assurance schemes. Salary sacrificed heath care scheme and Company sick pay after qualifying period. Perkbox The successful Calibration Technician day to day duties will include: Calibrate and test pneumatic / air tools to traceable standards in lab and at Customers sites within given timeframes. Identify solutions to customer problems and communicate them effectively, such solutions to include but not be limited to advice on calibration cycles, test points and equipment usage. Ensure that customer reports are completed professionally and clearly articulate the outcome and recommendations of any visit. Documenting and inputting data / results onto computer software and producing calibration certs. Ensure that all stock, equipment & tools are kept clean safe, secure and maintained to high level. To undertake and attend training courses necessary to develop and maintain competence to undertake the role. To observe and comply with all Company policies including but not limited to H&S, Car Policy, Expenses, Ethics Policy, IT User policy and all policies and appendices within the Contract of Employment. Flexibility to work approved O/T and work away from home with overnight stays if required. To be suitable for this Calibration Technician role you must have the following experience / skills / characteristics: Experience of using and testing pneumatic and torque tools - Avdel / Cherrymax Bottle, Huck Puller / Swager, nut runner, pin gun, pulse / rivet gun, torque screwdriver, torque wrench etc. To have a basic understanding of the calibration process and laboratory quality systems. 5 GCSE qualifications at grades A-C, or equivalent PC literate in MS Word and Excel. Hardworking, keen to learn, pursue self-development and provide a quality service to customers. Good interpersonal communication skills (verbal & written). Able to work as part of a team or alone with the minimum of supervision. Full UK driving licence (essential, preferably clean) The ideal Calibration Technician will have majority of the following experience / skills / characteristics: Recent experience of calibrating torque and or air tools to in-house, or traceable standards. Relevant mechanical / metrology engineering qualification i.e. HNC, NVQ / BTEC / C&G L3 etc. Time served or completed a relevant mechanical engineering apprenticeship. Mechanical maintenance / mechanical fitting experience. Experience of calibrating mechanical, physical or dimensional equipment. Knowledge of importing / exporting from Excel databases and report generation from databases and calibration software such as Indysoft (desirable) or MetCAL, InGAGE, ProCal, SureCal etc. Previous experience of working in the calibration, aerospace, automotive or manufacturing sectors Key words : Calibration Technician, Calibration, Air Tools, Torque, Airtools, Pneumatic, Aircraft Fitter, Mechanical Assembly, Mechanical Fitting, Car Mechanic, Vehicle Technician, Field Service, Mechanical, Physical, Dimensional, Repair, Maintenance, Torque Screw Driver, Torque Wrench, Torque Wrench Adjustable, Avdel Bottle, Cherrymax Bottle, Huck Puller / Swager, Nut Runner, Pin Gun, Pulse Gun, Inspection, AS 9100, QA, QC, Test and Verification, Test & Measurement, Quality, Aerospace, Automotive, Ex HM Forces, Travel, Full Time, Permanent, Blackburn, Salmesbury, Preston, Lancashire The successful Calibration Technician (Pneumatic / Airtools & Torque) will need to be methodical, numerate, organised, possess good communication skills, PC literate (Outlook, Word & Excel). and flexible as you will be required to work at other sites with overnight stays, work overtime and other duties not mentioned in this job description. You will have the relevant qualifications or experience, be trustworthy, punctual, conscientious, keen and have a practical approach to work. If you are interested in Calibration Technician role and have majority of the required experience, please click the apply now button.
