Senior Electronics Hardware Design Engineer £50-80k Base + Benefits South East Ref: ABJ6489ED Onsite: Perm An experienced Senior Electronics Hardware Design Engineer (FPGA) is required to join a highly regarded engineering R&D team developing advanced hydraulic and control systems for large machinery. This is an excellent opportunity to work at the centre of a multidisciplinary engineering environment, contributing to the development of innovative electronic hardware from concept through to production and customer support. You will play a key role in both new product development and the ongoing support of existing electronic systems, working closely with software, project, production and sales teams. The role offers a varied mix of hardware design, embedded development, prototyping, testing and technical support, with genuine scope to influence future product architecture and innovation. ONSITE Key Responsibilities Design and develop new electronic hardware and support existing products within control system applications Develop embedded firmware for DSPs and microcontrollers, including new functions and features Produce and maintain electronic schematics, PCB layouts and technical documentation Create and test prototype hardware and software, including validation and compliance testing Ensure electronic hardware meets relevant technical and quality standards Work closely with software engineers to support hardware integration and prototype development Support production with calibration, setup, testing and manufacturing queries Prepare and maintain Bills of Materials and support electronic component procurement Interface with sales teams to clarify technical requirements and assess feasibility Provide technical input to quotations and project planning Develop alternative technical solutions to meet customer requirements Contribute to research, product development strategy and future system architectures Support occasional hands-on assembly, modification and testing activities Qualifications & Experience Degree-qualified in Electronics Engineering or equivalent. Strong experience in electronic hardware design within control or instrumentation environments Experience working in a similar senior or design-focused role Strong problem-solving ability and attention to detail Digital circuit design including FPGA devices (e.g., Altera Cyclone) Embedded DSP and microcontroller integration (e.g., Texas Instruments DSP series) Embedded C development and firmware support FPGA development using VHDL (Quartus/Modelsim desirable) Low-noise analogue circuit design for sensor and transducer interfaces ADC and DAC interfacing Schematic capture and PCB layout (Altium desirable) Hardware/software integration and PC interface support Understanding of complete electronic systems and control architectures Practical electronics skills including soldering and assembly Industrial electronic packaging including connectors and enclosures Long-term career development; competitive salary and flexible benefits package. Onsite Full-time Permanent Competitive base salary up to 80k (dependent on experience) Flexible benefits package. To Apply: Contact Alison Basson on (phone number removed) / (phone number removed) Email: Ref: ABJ6489ED
Jul 13, 2026
Full time
Senior Electronics Hardware Design Engineer £50-80k Base + Benefits South East Ref: ABJ6489ED Onsite: Perm An experienced Senior Electronics Hardware Design Engineer (FPGA) is required to join a highly regarded engineering R&D team developing advanced hydraulic and control systems for large machinery. This is an excellent opportunity to work at the centre of a multidisciplinary engineering environment, contributing to the development of innovative electronic hardware from concept through to production and customer support. You will play a key role in both new product development and the ongoing support of existing electronic systems, working closely with software, project, production and sales teams. The role offers a varied mix of hardware design, embedded development, prototyping, testing and technical support, with genuine scope to influence future product architecture and innovation. ONSITE Key Responsibilities Design and develop new electronic hardware and support existing products within control system applications Develop embedded firmware for DSPs and microcontrollers, including new functions and features Produce and maintain electronic schematics, PCB layouts and technical documentation Create and test prototype hardware and software, including validation and compliance testing Ensure electronic hardware meets relevant technical and quality standards Work closely with software engineers to support hardware integration and prototype development Support production with calibration, setup, testing and manufacturing queries Prepare and maintain Bills of Materials and support electronic component procurement Interface with sales teams to clarify technical requirements and assess feasibility Provide technical input to quotations and project planning Develop alternative technical solutions to meet customer requirements Contribute to research, product development strategy and future system architectures Support occasional hands-on assembly, modification and testing activities Qualifications & Experience Degree-qualified in Electronics Engineering or equivalent. Strong experience in electronic hardware design within control or instrumentation environments Experience working in a similar senior or design-focused role Strong problem-solving ability and attention to detail Digital circuit design including FPGA devices (e.g., Altera Cyclone) Embedded DSP and microcontroller integration (e.g., Texas Instruments DSP series) Embedded C development and firmware support FPGA development using VHDL (Quartus/Modelsim desirable) Low-noise analogue circuit design for sensor and transducer interfaces ADC and DAC interfacing Schematic capture and PCB layout (Altium desirable) Hardware/software integration and PC interface support Understanding of complete electronic systems and control architectures Practical electronics skills including soldering and assembly Industrial electronic packaging including connectors and enclosures Long-term career development; competitive salary and flexible benefits package. Onsite Full-time Permanent Competitive base salary up to 80k (dependent on experience) Flexible benefits package. To Apply: Contact Alison Basson on (phone number removed) / (phone number removed) Email: Ref: ABJ6489ED
Due to continued investment within product development our manufacturing client is seeking an experienced Senior Project Engineer to lead the development of new products from concept through to manufacture. Working within a highly regulated environment, this is an excellent opportunity for an ambitious engineering professional who enjoys leading technical projects, solving complex challenges and delivering high-quality products. The Senior Project Engineer will be responsible for the complete lifecycle management of new product development projects, ensuring all technical, commercial and regulatory objectives are successfully achieved. Key responsibilities include: Leading new product development projects from initial concept through to production. Managing multiple concurrent projects, ensuring delivery against agreed cost, quality and timescale objectives. Coordinating cross-functional teams, suppliers and stakeholders to achieve successful project outcomes. Developing project plans, technical documentation, specifications, budgets and design history files. Driving product verification and validation activities, ensuring full traceability and compliance with relevant standards. Leading product risk management activities, including FMEA, hazard analysis and risk management planning. Supporting regulatory submissions and audits through the preparation of technical evidence and documentation. Working closely with testing and manufacturing teams to ensure products are robust, manufacturable and fit for purpose. Identifying project risks early and implementing practical solutions to maintain delivery schedules. Applying structured problem-solving techniques to overcome technical challenges. Keeping up to date with emerging technologies, materials and manufacturing processes to support continuous innovation. Our client is looking for someone with a background within engineering who can combine their strong technical knowledge with excellent project leadership skills. Experience/qualifications: Previous experience working as a Project Lead within an engineering/manufacturing environment A proven track record of delivering technical or new product development projects within a regulated manufacturing environment. Experience of product development, manufacturing, testing and quality assurance. Experience of manufacturing processes such as injection moulding, extrusion and machining. Excellent communication skills with the ability to engage confidently across engineering, manufacturing, quality and senior leadership teams. Strong analytical and problem-solving abilities with a practical, hands-on approach. Excellent organisational skills with the ability to manage multiple priorities effectively. This role is an office based role with the potential for hybrid working, the ability to commute to Alfreton is essential. Package includes: A competitive basic salary of circa 55,000 25 days holiday + 8 statutory holidays Company pension Access to onsite facilities and company discount schemes
Jul 13, 2026
Full time
Due to continued investment within product development our manufacturing client is seeking an experienced Senior Project Engineer to lead the development of new products from concept through to manufacture. Working within a highly regulated environment, this is an excellent opportunity for an ambitious engineering professional who enjoys leading technical projects, solving complex challenges and delivering high-quality products. The Senior Project Engineer will be responsible for the complete lifecycle management of new product development projects, ensuring all technical, commercial and regulatory objectives are successfully achieved. Key responsibilities include: Leading new product development projects from initial concept through to production. Managing multiple concurrent projects, ensuring delivery against agreed cost, quality and timescale objectives. Coordinating cross-functional teams, suppliers and stakeholders to achieve successful project outcomes. Developing project plans, technical documentation, specifications, budgets and design history files. Driving product verification and validation activities, ensuring full traceability and compliance with relevant standards. Leading product risk management activities, including FMEA, hazard analysis and risk management planning. Supporting regulatory submissions and audits through the preparation of technical evidence and documentation. Working closely with testing and manufacturing teams to ensure products are robust, manufacturable and fit for purpose. Identifying project risks early and implementing practical solutions to maintain delivery schedules. Applying structured problem-solving techniques to overcome technical challenges. Keeping up to date with emerging technologies, materials and manufacturing processes to support continuous innovation. Our client is looking for someone with a background within engineering who can combine their strong technical knowledge with excellent project leadership skills. Experience/qualifications: Previous experience working as a Project Lead within an engineering/manufacturing environment A proven track record of delivering technical or new product development projects within a regulated manufacturing environment. Experience of product development, manufacturing, testing and quality assurance. Experience of manufacturing processes such as injection moulding, extrusion and machining. Excellent communication skills with the ability to engage confidently across engineering, manufacturing, quality and senior leadership teams. Strong analytical and problem-solving abilities with a practical, hands-on approach. Excellent organisational skills with the ability to manage multiple priorities effectively. This role is an office based role with the potential for hybrid working, the ability to commute to Alfreton is essential. Package includes: A competitive basic salary of circa 55,000 25 days holiday + 8 statutory holidays Company pension Access to onsite facilities and company discount schemes
Senior Manufacturing Engineer - Electrical Ampthill, Bedfordshire Permanent, 37.5h, 4 day working week Monday to Thursday Salary: 55,000 - 70,000 We are seeking an experienced Senior Manufacturing Engineer specialising in electrical and cabling systems to lead the development, industrialisation, and continuous improvement of complex electrical harness manufacturing activities from initial design release through to full-rate production. This role will play a key part in supporting both new product introduction (NPI) programmes and the optimisation of existing manufacturing operations, ensuring products are delivered safely, efficiently, and to the highest aerospace quality standards. The successful candidate will work closely with Design Engineering, Quality, Supply Chain, Production, and Programme teams to develop robust and scalable manufacturing solutions within a fast-paced aerospace and defence environment. The position requires a strong technical understanding of electrical harness assembly processes combined with practical experience implementing manufacturing improvements on the factory floor. Key Responsibilities Lead manufacturing engineering activities for electrical harness and cabling assemblies across the full product lifecycle. Support New Product Introduction (NPI) activities including process development, tooling definition, work instruction creation, and production readiness reviews. Develop and implement efficient manufacturing processes for electrical harness assembly, including: Wire preparation and termination, Crimping and soldering, Braiding and shielding, Potting and encapsulation, Looming and routing, Electrical testing and inspection Translate engineering designs and drawings into robust, repeatable manufacturing methods and documentation. Create and maintain manufacturing documentation including: Process specifications, Manufacturing routings, Standard operating procedures (SOPs), Work instructions, PFMEA and control plans Drive continuous improvement initiatives focused on: Cost reduction, Yield improvement, Scrap and rework reduction, Cycle time optimisation, Right-first-time manufacturing Provide technical support to production teams to resolve manufacturing and quality issues in a timely manner. Conduct root cause investigations using structured problem-solving methodologies such as: 8D, RC, Fishbone analysi, 5 Whys Collaborate with Quality Engineering to ensure compliance with aerospace standards and customer requirements. Support design for manufacture (DFM) and design for assembly (DFA) reviews during product development stages. Identify and implement tooling, fixture, and process improvements to enhance manufacturing capability and repeatability. Participate in internal and external audits and support regulatory and customer compliance activities. Work closely with suppliers and subcontractors to ensure manufacturing capability and component quality requirements are achieved. Mentor junior engineers and production personnel on manufacturing best practices and process standards. Support capacity planning, line balancing, and production ramp-up activities for new and existing programmes. Required skills, qualifications and experience Degree-qualified in Manufacturing Engineering, Electrical Engineering, Aerospace Engineering, or a related engineering discipline. Proven experience in a Manufacturing Engineering role within aerospace, defence, automotive, or another highly regulated industry. Strong experience leading New Product Introduction (NPI) activities from prototype through to full production release. Demonstrated success delivering continuous improvement initiatives focused on quality, efficiency, and cost reduction. Strong understanding of aerospace quality standards and regulatory requirements, including: AS9100, IPC/WHMA-A-620, ESD control requirements, Configuration control processes Deep technical knowledge of electrical harness manufacturing processes, including: Crimping, Braiding, Potting, Soldering, Cable routing and protection, Connector assembly and backshell integration Experience developing manufacturing documentation and production process controls. Proficient in CAD systems and manufacturing documentation tools. Experience using ERP and MRP systems within a production environment. Strong analytical and problem-solving skills with the ability to identify root causes and implement sustainable corrective actions. Excellent communication and stakeholder management skills, with the ability to work effectively across engineering, quality, and production functions. Comfortable working within a fast-paced, high-mix, low-volume manufacturing environment. Strong organisational skills with the ability to manage multiple priorities and programme deadlines simultaneously. Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call (phone number removed) Disclaimer: This vacancy is being advertised by Optamor Limited. Optamor is a specialist Recruitment Process Outsourcing provider. We provide a flexible full recruitment solution which takes care of all recruitment requirements from planning to on-boarding. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Jul 13, 2026
Full time
Senior Manufacturing Engineer - Electrical Ampthill, Bedfordshire Permanent, 37.5h, 4 day working week Monday to Thursday Salary: 55,000 - 70,000 We are seeking an experienced Senior Manufacturing Engineer specialising in electrical and cabling systems to lead the development, industrialisation, and continuous improvement of complex electrical harness manufacturing activities from initial design release through to full-rate production. This role will play a key part in supporting both new product introduction (NPI) programmes and the optimisation of existing manufacturing operations, ensuring products are delivered safely, efficiently, and to the highest aerospace quality standards. The successful candidate will work closely with Design Engineering, Quality, Supply Chain, Production, and Programme teams to develop robust and scalable manufacturing solutions within a fast-paced aerospace and defence environment. The position requires a strong technical understanding of electrical harness assembly processes combined with practical experience implementing manufacturing improvements on the factory floor. Key Responsibilities Lead manufacturing engineering activities for electrical harness and cabling assemblies across the full product lifecycle. Support New Product Introduction (NPI) activities including process development, tooling definition, work instruction creation, and production readiness reviews. Develop and implement efficient manufacturing processes for electrical harness assembly, including: Wire preparation and termination, Crimping and soldering, Braiding and shielding, Potting and encapsulation, Looming and routing, Electrical testing and inspection Translate engineering designs and drawings into robust, repeatable manufacturing methods and documentation. Create and maintain manufacturing documentation including: Process specifications, Manufacturing routings, Standard operating procedures (SOPs), Work instructions, PFMEA and control plans Drive continuous improvement initiatives focused on: Cost reduction, Yield improvement, Scrap and rework reduction, Cycle time optimisation, Right-first-time manufacturing Provide technical support to production teams to resolve manufacturing and quality issues in a timely manner. Conduct root cause investigations using structured problem-solving methodologies such as: 8D, RC, Fishbone analysi, 5 Whys Collaborate with Quality Engineering to ensure compliance with aerospace standards and customer requirements. Support design for manufacture (DFM) and design for assembly (DFA) reviews during product development stages. Identify and implement tooling, fixture, and process improvements to enhance manufacturing capability and repeatability. Participate in internal and external audits and support regulatory and customer compliance activities. Work closely with suppliers and subcontractors to ensure manufacturing capability and component quality requirements are achieved. Mentor junior engineers and production personnel on manufacturing best practices and process standards. Support capacity planning, line balancing, and production ramp-up activities for new and existing programmes. Required skills, qualifications and experience Degree-qualified in Manufacturing Engineering, Electrical Engineering, Aerospace Engineering, or a related engineering discipline. Proven experience in a Manufacturing Engineering role within aerospace, defence, automotive, or another highly regulated industry. Strong experience leading New Product Introduction (NPI) activities from prototype through to full production release. Demonstrated success delivering continuous improvement initiatives focused on quality, efficiency, and cost reduction. Strong understanding of aerospace quality standards and regulatory requirements, including: AS9100, IPC/WHMA-A-620, ESD control requirements, Configuration control processes Deep technical knowledge of electrical harness manufacturing processes, including: Crimping, Braiding, Potting, Soldering, Cable routing and protection, Connector assembly and backshell integration Experience developing manufacturing documentation and production process controls. Proficient in CAD systems and manufacturing documentation tools. Experience using ERP and MRP systems within a production environment. Strong analytical and problem-solving skills with the ability to identify root causes and implement sustainable corrective actions. Excellent communication and stakeholder management skills, with the ability to work effectively across engineering, quality, and production functions. Comfortable working within a fast-paced, high-mix, low-volume manufacturing environment. Strong organisational skills with the ability to manage multiple priorities and programme deadlines simultaneously. Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call (phone number removed) Disclaimer: This vacancy is being advertised by Optamor Limited. Optamor is a specialist Recruitment Process Outsourcing provider. We provide a flexible full recruitment solution which takes care of all recruitment requirements from planning to on-boarding. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Senior Embedded Engineer, Electronics, C++, Lymington, Southampton to £60,000 (Hybrid working) A leading manufacturing firm based near Southampton are requiring a Senior Embedded Engineer with expertise in embedded systems to design, develop, test, and maintain specialised computer systems tailored for specific tasks within application-specific products and solutions. The role will involve responsibilities interpreting user needs and capturing system requirements then negotiating the technical requirements for firmware, electronic and mechanical hardware designs, test plan engineering , collaborating with other engineering teams, and ensuring the system is reliable, efficient, and secure. Main duties • Support of system design and architecture: Develop the overall architecture of embedded systems, focusing on performance, scalability, and power efficiency . • Clarify requirements for firmware, mechanical and electronic hardware development . • Negotiate requirements with product management, sales and other stakeholders and communicate these requirements with the project team. • Integration: Integrate software and hardware components to ensure they work together seamlessly. • Testing and validation: Develop and execute test plans to verify that the system meets its specifications and is reliable. • Collaboration: Work with other teams, including software, mechanical, and electrical engineers, to define requirements and integrate solutions . • Documentation: Create and maintain comprehensive documentation for the system's design and functionality. Candidate requirements • Bachelor's degree in a related engineering field, such as computer engineering, electrical engineering, or computer science. • Proficiency in programming languages like C and C++. • Familiarity with modern OS coding techniques, IP protocols, and hardware interface s. • Knowledge of PCB design tools and electronic design automation software . • Experience with debugging tools and techniques for embedded systems. • Strong problem-solving, communication, and critical thinking skills
Jul 12, 2026
Full time
Senior Embedded Engineer, Electronics, C++, Lymington, Southampton to £60,000 (Hybrid working) A leading manufacturing firm based near Southampton are requiring a Senior Embedded Engineer with expertise in embedded systems to design, develop, test, and maintain specialised computer systems tailored for specific tasks within application-specific products and solutions. The role will involve responsibilities interpreting user needs and capturing system requirements then negotiating the technical requirements for firmware, electronic and mechanical hardware designs, test plan engineering , collaborating with other engineering teams, and ensuring the system is reliable, efficient, and secure. Main duties • Support of system design and architecture: Develop the overall architecture of embedded systems, focusing on performance, scalability, and power efficiency . • Clarify requirements for firmware, mechanical and electronic hardware development . • Negotiate requirements with product management, sales and other stakeholders and communicate these requirements with the project team. • Integration: Integrate software and hardware components to ensure they work together seamlessly. • Testing and validation: Develop and execute test plans to verify that the system meets its specifications and is reliable. • Collaboration: Work with other teams, including software, mechanical, and electrical engineers, to define requirements and integrate solutions . • Documentation: Create and maintain comprehensive documentation for the system's design and functionality. Candidate requirements • Bachelor's degree in a related engineering field, such as computer engineering, electrical engineering, or computer science. • Proficiency in programming languages like C and C++. • Familiarity with modern OS coding techniques, IP protocols, and hardware interface s. • Knowledge of PCB design tools and electronic design automation software . • Experience with debugging tools and techniques for embedded systems. • Strong problem-solving, communication, and critical thinking skills
We have an exciting opportunity for a passionate Test Engineer to join our dynamic team within Manufacturing. Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. The opportunity: This opportunity isfor a Senior Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during early phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement. Work alongside Test Experts and design engineers to understand and implement the project test strategy and influence the design to include the appropriate testability solutions. Work alongside the Manufacturing management in compiling the initial process flows for new product. Create and maintain the test documentation for production test equipment. Support the Process FMEA, ensuring test mitigations are in place. Initialise test fixture designs for new product. Estimate the time taken to test new products Support the design engineers in carrying out the functional & Environmental testing of initial prototypes. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum Qualification Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Jul 12, 2026
Full time
We have an exciting opportunity for a passionate Test Engineer to join our dynamic team within Manufacturing. Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. The opportunity: This opportunity isfor a Senior Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during early phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement. Work alongside Test Experts and design engineers to understand and implement the project test strategy and influence the design to include the appropriate testability solutions. Work alongside the Manufacturing management in compiling the initial process flows for new product. Create and maintain the test documentation for production test equipment. Support the Process FMEA, ensuring test mitigations are in place. Initialise test fixture designs for new product. Estimate the time taken to test new products Support the design engineers in carrying out the functional & Environmental testing of initial prototypes. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum Qualification Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Are you looking a Senior Software Engineer C++ role based in Colchester, Essex working for a global leading engineering business? If so, my client is currently recruiting for a Senior Software Engineer C++ to join a pioneer in in advanced microelectronics and power-electronic automated x-ray metrology equipment. As a Senior Software Engineer C++, you will be responsible for designing, developing, maintaining and documenting software functionalities, particularly in the areas of X-ray image analysis and motion control. Requirements for Senior Software Engineer C++ position; Proficiency in C++ development in a multi-threaded environment for performance-critical application Strong foundation in computer vision, image processing, or signal processing Experience with Behaviour-Driven Development (BDD) and/or Test-Driven Development (TDD) Software development on 64-bit Windows 10/11 platforms This is a fantastic opportunity to join a world leader in their industry offering excellent career prospects. Their Colchester, Essex based Research and Development team work directly with some of the largest semiconductor and electronic manufacturing companies in the world, to help solve their reliability challenges. APPLY NOW! For the Senior Software Engineer C++ job, located Colchester, Essex by sending a CV to (url removed) or by calling Tom Drew on (phone number removed) quoting ref. THD1399. Otherwise, we always welcome the opportunity to discuss other roles similar to Engineering jobs on (phone number removed).
Jul 11, 2026
Full time
Are you looking a Senior Software Engineer C++ role based in Colchester, Essex working for a global leading engineering business? If so, my client is currently recruiting for a Senior Software Engineer C++ to join a pioneer in in advanced microelectronics and power-electronic automated x-ray metrology equipment. As a Senior Software Engineer C++, you will be responsible for designing, developing, maintaining and documenting software functionalities, particularly in the areas of X-ray image analysis and motion control. Requirements for Senior Software Engineer C++ position; Proficiency in C++ development in a multi-threaded environment for performance-critical application Strong foundation in computer vision, image processing, or signal processing Experience with Behaviour-Driven Development (BDD) and/or Test-Driven Development (TDD) Software development on 64-bit Windows 10/11 platforms This is a fantastic opportunity to join a world leader in their industry offering excellent career prospects. Their Colchester, Essex based Research and Development team work directly with some of the largest semiconductor and electronic manufacturing companies in the world, to help solve their reliability challenges. APPLY NOW! For the Senior Software Engineer C++ job, located Colchester, Essex by sending a CV to (url removed) or by calling Tom Drew on (phone number removed) quoting ref. THD1399. Otherwise, we always welcome the opportunity to discuss other roles similar to Engineering jobs on (phone number removed).
An opportunity has arisen for an Engineering Manager to act as the manufacturing technical authority for a missile portfolio. The role of the Manufacturing Systems Architect is a key role within MBDA, ensuring that the production systems are fit for today and battle ready for the future. Salary: Circa £70,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site, due to workload classification and team collaboration Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. (This role requires SC) What we can offer you: Company Bonus: Bonus of up to 27% of base salary Car Allowance: £300 per calendar month Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Private Medical Insurance: Eligible employees are enrolled as standard into the company funded Private Medical Insurance benefit. The opportunity: The Manufacturing Systems Architect is responsible for ensuring the manufacturing system is technically capable for the current production requirements of the portfolio and managing all changes to ensure the future requirements are met. Responsible for leading Spiral Development activities at Project level from a manufacturing perspective ensuring business Units are involved and aware. Coordinate obsolescence from a manufacturing project perspective Responsible for leading Industrialisation aspects of Project Product Gate Reviews Responsible for leading and support Project lead Continuous Improvement initiatives to ensure the area of responsibility is continually developing to improve efficiency. Responsible for leading project rate increase requirements ensuring all production areas can deliver the rate requirements. Managing the Manufacturing CAPEX submissions/requirements and funding at a Project level. Coordinate the overall project preparation and proving of the Production System from initial validation to full certification of the production system, ensuring the smooth transition from Development in to Series Production at a technical level. Responsible for leading Project Risk identification and aversion strategies associated with technical definition and manufacturing methodologies. Responsible for developing, maintaining and controlling technical interfaces to customers, suppliers and collaborators to ensure effective and swift resolution of technical issues at a Project level. What we're looking for from you: An experienced professional with a proven technical background in engineering Experience with manufacturing systems, preferably within the defence sector Excellent stakeholder management and relationship-building skills. The ability to influence people externally, cross functionally, across the business and within a project environment Demonstrates the ability to be a credible authority on technical topics at Project and Domain level. Demonstrable experience in leading projects, such as Spiral Development and obsolescence removal activities Experience in problem-solving, risk management, and resolving challenging technical issues in a timely manner Experience with industrialisation processes Excellent communication, organizational, and decision-making skills. Confidence and capability in making or influencing solutions at a senior level. Manufacturing experience that will allow you to manage stakeholders with a long-term, strategic vision. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Jul 11, 2026
Full time
An opportunity has arisen for an Engineering Manager to act as the manufacturing technical authority for a missile portfolio. The role of the Manufacturing Systems Architect is a key role within MBDA, ensuring that the production systems are fit for today and battle ready for the future. Salary: Circa £70,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site, due to workload classification and team collaboration Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. (This role requires SC) What we can offer you: Company Bonus: Bonus of up to 27% of base salary Car Allowance: £300 per calendar month Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Private Medical Insurance: Eligible employees are enrolled as standard into the company funded Private Medical Insurance benefit. The opportunity: The Manufacturing Systems Architect is responsible for ensuring the manufacturing system is technically capable for the current production requirements of the portfolio and managing all changes to ensure the future requirements are met. Responsible for leading Spiral Development activities at Project level from a manufacturing perspective ensuring business Units are involved and aware. Coordinate obsolescence from a manufacturing project perspective Responsible for leading Industrialisation aspects of Project Product Gate Reviews Responsible for leading and support Project lead Continuous Improvement initiatives to ensure the area of responsibility is continually developing to improve efficiency. Responsible for leading project rate increase requirements ensuring all production areas can deliver the rate requirements. Managing the Manufacturing CAPEX submissions/requirements and funding at a Project level. Coordinate the overall project preparation and proving of the Production System from initial validation to full certification of the production system, ensuring the smooth transition from Development in to Series Production at a technical level. Responsible for leading Project Risk identification and aversion strategies associated with technical definition and manufacturing methodologies. Responsible for developing, maintaining and controlling technical interfaces to customers, suppliers and collaborators to ensure effective and swift resolution of technical issues at a Project level. What we're looking for from you: An experienced professional with a proven technical background in engineering Experience with manufacturing systems, preferably within the defence sector Excellent stakeholder management and relationship-building skills. The ability to influence people externally, cross functionally, across the business and within a project environment Demonstrates the ability to be a credible authority on technical topics at Project and Domain level. Demonstrable experience in leading projects, such as Spiral Development and obsolescence removal activities Experience in problem-solving, risk management, and resolving challenging technical issues in a timely manner Experience with industrialisation processes Excellent communication, organizational, and decision-making skills. Confidence and capability in making or influencing solutions at a senior level. Manufacturing experience that will allow you to manage stakeholders with a long-term, strategic vision. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Acs Business Performance Ltd
Cambridge, Cambridgeshire
Electronics Engineer Junior Electronics Engineer Electronics Engineer Senior Electronics Engineer We are recruiting Electronics Engineers at Junior, Engineer and Senior levels to join a growing engineering team developing advanced thermal imaging and electro optical products used in demanding commercial, industrial and defence applications. This is an opportunity to work on innovative technology within a business that designs, develops and manufactures its own products. You'll become part of a multidisciplinary engineering team, working alongside software, firmware, mechanical and production engineers to develop high performance electronic systems from initial concept through to manufacture. Depending on your level of experience, you'll either develop your technical skills under the guidance of experienced engineers, work independently across the full product development lifecycle, or take technical ownership of complex electronic designs while supporting and mentoring other members of the engineering team. The Role You'll be involved in the design, development, testing and support of electronic hardware used in advanced imaging products. Working as part of the engineering team, you'll contribute throughout the complete product development lifecycle, from concept and feasibility through prototype development, verification, testing and production. Typical responsibilities include: Designing analogue and digital electronic circuits. Producing schematics, design calculations and technical documentation. Supporting PCB design and hardware development. Testing, debugging and fault finding at board and system level. Integrating electronic hardware with firmware, software, sensors and communication interfaces. Supporting prototype builds, product verification and production release. Working with production teams to resolve technical issues and support manufacturing. Contributing to product improvements, component selection and ongoing engineering development. Senior Engineers will also take technical ownership of projects, contribute to design reviews, support engineering best practice and provide technical guidance to junior engineers. About You We're interested in hearing from engineers at different stages of their career, from graduates and early career engineers through to experienced Senior Electronics Engineers. You'll ideally have experience in some or all of the following: Electronic hardware design. Analogue and digital electronics. PCB design and schematic capture. Electronic testing, debugging and fault finding. Embedded electronics, microcontrollers, FPGA or sensor integration. Working on products from concept through to manufacture. Experience gained within defence, aerospace, industrial, scientific or other high technology engineering environments would be beneficial, although candidates from other electronics design backgrounds will also be considered. You'll hold a degree, HNC, HND, apprenticeship or equivalent qualification in Electronic Engineering, Electrical Engineering or a related discipline, together with a practical, hands on approach to solving engineering problems. What's on Offer This is an opportunity to work on technically challenging products within a collaborative engineering environment where you'll have exposure to the complete product development process. In return you'll receive: A competitive salary aligned to your experience and level. Opportunities at Junior, Engineer and Senior Engineer level. The chance to work on advanced thermal imaging and electro optical technology. Involvement in projects from concept through to manufacture. Ongoing technical development and career progression. A permanent position within an established and innovative engineering business. Whether you're looking to take the next step in your engineering career or you're an experienced electronics engineer seeking a technically challenging environment, we'd be pleased to hear from you.
Jul 11, 2026
Full time
Electronics Engineer Junior Electronics Engineer Electronics Engineer Senior Electronics Engineer We are recruiting Electronics Engineers at Junior, Engineer and Senior levels to join a growing engineering team developing advanced thermal imaging and electro optical products used in demanding commercial, industrial and defence applications. This is an opportunity to work on innovative technology within a business that designs, develops and manufactures its own products. You'll become part of a multidisciplinary engineering team, working alongside software, firmware, mechanical and production engineers to develop high performance electronic systems from initial concept through to manufacture. Depending on your level of experience, you'll either develop your technical skills under the guidance of experienced engineers, work independently across the full product development lifecycle, or take technical ownership of complex electronic designs while supporting and mentoring other members of the engineering team. The Role You'll be involved in the design, development, testing and support of electronic hardware used in advanced imaging products. Working as part of the engineering team, you'll contribute throughout the complete product development lifecycle, from concept and feasibility through prototype development, verification, testing and production. Typical responsibilities include: Designing analogue and digital electronic circuits. Producing schematics, design calculations and technical documentation. Supporting PCB design and hardware development. Testing, debugging and fault finding at board and system level. Integrating electronic hardware with firmware, software, sensors and communication interfaces. Supporting prototype builds, product verification and production release. Working with production teams to resolve technical issues and support manufacturing. Contributing to product improvements, component selection and ongoing engineering development. Senior Engineers will also take technical ownership of projects, contribute to design reviews, support engineering best practice and provide technical guidance to junior engineers. About You We're interested in hearing from engineers at different stages of their career, from graduates and early career engineers through to experienced Senior Electronics Engineers. You'll ideally have experience in some or all of the following: Electronic hardware design. Analogue and digital electronics. PCB design and schematic capture. Electronic testing, debugging and fault finding. Embedded electronics, microcontrollers, FPGA or sensor integration. Working on products from concept through to manufacture. Experience gained within defence, aerospace, industrial, scientific or other high technology engineering environments would be beneficial, although candidates from other electronics design backgrounds will also be considered. You'll hold a degree, HNC, HND, apprenticeship or equivalent qualification in Electronic Engineering, Electrical Engineering or a related discipline, together with a practical, hands on approach to solving engineering problems. What's on Offer This is an opportunity to work on technically challenging products within a collaborative engineering environment where you'll have exposure to the complete product development process. In return you'll receive: A competitive salary aligned to your experience and level. Opportunities at Junior, Engineer and Senior Engineer level. The chance to work on advanced thermal imaging and electro optical technology. Involvement in projects from concept through to manufacture. Ongoing technical development and career progression. A permanent position within an established and innovative engineering business. Whether you're looking to take the next step in your engineering career or you're an experienced electronics engineer seeking a technically challenging environment, we'd be pleased to hear from you.
Elevation Recruitment Group
Chesterfield, Derbyshire
Lead Project / Process Engineer Location: Chesterfield (4 days office / 1 day WFH) Salary: £50,000 - £65,000 + Bonus & Benefits Project Engineer Opportunity An established engineering business delivering complex industrial process plant projects is seeking a Lead Process Engineer to join its growing team. This is an excellent opportunity for a Chemical or Process Engineer who enjoys combining technical engineering with project delivery responsibilities. You will play a key role in supporting the design, execution, installation and commissioning of process plant projects, working closely with clients, suppliers and multidisciplinary engineering teams. The role offers significant variety, combining process engineering, project coordination, client interaction and site-based activities, with opportunities to develop into more senior technical and project leadership positions. Project Engineer Key Responsibilities Lead process engineering activities throughout the project lifecycle, from concept and design through to installation and commissioning. Produce and review process engineering deliverables including process flow diagrams, P&IDs, calculations and technical specifications. Develop equipment specifications and scopes of work for suppliers and contractors. Coordinate technical activities across engineering disciplines to ensure successful project delivery. Support process safety reviews, risk assessments and engineering design studies. Act as a key technical interface between clients, suppliers and internal project teams. Review vendor documentation and support procurement activities. Provide technical support during installation, commissioning and performance testing. Assist with the development of operating procedures and engineering documentation. Participate in site visits and occasional travel as projects require. About You We are interested in speaking with engineers who have experience within industrial process environments, manufacturing facilities, process plant projects or engineering contractors. You will ideally have: Degree qualification in Chemical Engineering or a related engineering discipline. Experience delivering engineering projects within a process, manufacturing or industrial environment. Strong understanding of process engineering fundamentals, including process calculations, equipment selection and plant operation. Experience developing process flow diagrams and P&IDs. Exposure to process safety studies, risk assessments or engineering design reviews. Strong communication skills with the ability to work effectively with clients, suppliers and project teams. A structured and practical approach to problem solving. Ideal Backgrounds Candidates may come from industries such as: Chemical manufacturing Industrial processing Materials manufacturing Process plant engineering Utilities and infrastructure Energy and environmental technologies Engineering consultancy EPC / turnkey project delivery Heavy industrial manufacturing What's on Offer Competitive salary of £50,000 - £65,000 Bonus scheme Flexible hybrid working arrangement Long-term career development opportunities Exposure to technically challenging, international engineering projects Supportive and collaborative engineering environment
Jul 11, 2026
Full time
Lead Project / Process Engineer Location: Chesterfield (4 days office / 1 day WFH) Salary: £50,000 - £65,000 + Bonus & Benefits Project Engineer Opportunity An established engineering business delivering complex industrial process plant projects is seeking a Lead Process Engineer to join its growing team. This is an excellent opportunity for a Chemical or Process Engineer who enjoys combining technical engineering with project delivery responsibilities. You will play a key role in supporting the design, execution, installation and commissioning of process plant projects, working closely with clients, suppliers and multidisciplinary engineering teams. The role offers significant variety, combining process engineering, project coordination, client interaction and site-based activities, with opportunities to develop into more senior technical and project leadership positions. Project Engineer Key Responsibilities Lead process engineering activities throughout the project lifecycle, from concept and design through to installation and commissioning. Produce and review process engineering deliverables including process flow diagrams, P&IDs, calculations and technical specifications. Develop equipment specifications and scopes of work for suppliers and contractors. Coordinate technical activities across engineering disciplines to ensure successful project delivery. Support process safety reviews, risk assessments and engineering design studies. Act as a key technical interface between clients, suppliers and internal project teams. Review vendor documentation and support procurement activities. Provide technical support during installation, commissioning and performance testing. Assist with the development of operating procedures and engineering documentation. Participate in site visits and occasional travel as projects require. About You We are interested in speaking with engineers who have experience within industrial process environments, manufacturing facilities, process plant projects or engineering contractors. You will ideally have: Degree qualification in Chemical Engineering or a related engineering discipline. Experience delivering engineering projects within a process, manufacturing or industrial environment. Strong understanding of process engineering fundamentals, including process calculations, equipment selection and plant operation. Experience developing process flow diagrams and P&IDs. Exposure to process safety studies, risk assessments or engineering design reviews. Strong communication skills with the ability to work effectively with clients, suppliers and project teams. A structured and practical approach to problem solving. Ideal Backgrounds Candidates may come from industries such as: Chemical manufacturing Industrial processing Materials manufacturing Process plant engineering Utilities and infrastructure Energy and environmental technologies Engineering consultancy EPC / turnkey project delivery Heavy industrial manufacturing What's on Offer Competitive salary of £50,000 - £65,000 Bonus scheme Flexible hybrid working arrangement Long-term career development opportunities Exposure to technically challenging, international engineering projects Supportive and collaborative engineering environment
Health, Safety & Environment Lead Near Tewkesbury Permanent Competitive Package ROLE We are looking for an experienced Health, Safety & Environment Manager to drive and continuously improve our HSE strategy at our manufacturing business.This is a highly influential role, responsible for shaping safety culture, ensuring compliance, reducing risk and providing expert guidance. You will operate as the subject matter expert for all HSE matters, helping to create safe, compliant and high-performing workplaces while supporting business growth and operational excellence. RESPONSIBILITIES Lead the development and implementation of the Health, Safety & Environmental strategy, policies and standards Conduct audits, risk assessments and compliance reviews Drive a proactive safety culture through coaching, training and engagement initiatives Lead investigations into incidents, near misses and safety concerns Identify root causes and implement preventative actions KNOWLEDGE AND SKILLS Essential Proven experience in a senior Health & Safety role within a manufacturing, engineering or industrial environment Strong knowledge of UK Health & Safety legislation, compliance requirements and best practice Experience conducting audits, risk assessments, incident investigations and safety improvement programmes Strong communication, organisational and analytical skills with a proactive approach to problem-solving NEBOSH Diploma, NVQ Level 5/6 or equivalent Health & Safety qualification Desirable Knowledge of ISO management systems and continuous improvement methodologies Experience supporting customer, supplier or tender-related HSE requirements Membership of a recognised professional body such as IOSH or IIRSM WHAT WE ARE LOOKING FOR A confident and credible HSE professional who can build relationships and influence positive change Someone who is proactive, self-motivated and comfortable working with a high degree of autonomy A leader who can balance strategic thinking with a hands-on approach to improving standards An individual who thrives in a fast-paced operational environment and enjoys driving continuous improvement A passionate advocate for workplace safety who can inspire others to take ownership of Health & Safety If you feel you have the experience for the above role, then please apply with your latest CV.
Jul 11, 2026
Full time
Health, Safety & Environment Lead Near Tewkesbury Permanent Competitive Package ROLE We are looking for an experienced Health, Safety & Environment Manager to drive and continuously improve our HSE strategy at our manufacturing business.This is a highly influential role, responsible for shaping safety culture, ensuring compliance, reducing risk and providing expert guidance. You will operate as the subject matter expert for all HSE matters, helping to create safe, compliant and high-performing workplaces while supporting business growth and operational excellence. RESPONSIBILITIES Lead the development and implementation of the Health, Safety & Environmental strategy, policies and standards Conduct audits, risk assessments and compliance reviews Drive a proactive safety culture through coaching, training and engagement initiatives Lead investigations into incidents, near misses and safety concerns Identify root causes and implement preventative actions KNOWLEDGE AND SKILLS Essential Proven experience in a senior Health & Safety role within a manufacturing, engineering or industrial environment Strong knowledge of UK Health & Safety legislation, compliance requirements and best practice Experience conducting audits, risk assessments, incident investigations and safety improvement programmes Strong communication, organisational and analytical skills with a proactive approach to problem-solving NEBOSH Diploma, NVQ Level 5/6 or equivalent Health & Safety qualification Desirable Knowledge of ISO management systems and continuous improvement methodologies Experience supporting customer, supplier or tender-related HSE requirements Membership of a recognised professional body such as IOSH or IIRSM WHAT WE ARE LOOKING FOR A confident and credible HSE professional who can build relationships and influence positive change Someone who is proactive, self-motivated and comfortable working with a high degree of autonomy A leader who can balance strategic thinking with a hands-on approach to improving standards An individual who thrives in a fast-paced operational environment and enjoys driving continuous improvement A passionate advocate for workplace safety who can inspire others to take ownership of Health & Safety If you feel you have the experience for the above role, then please apply with your latest CV.
Senior Software Engineer - (phone number removed) - £57.20/hr Are you ready to elevate your career as a Senior Software Engineer? This exciting opportunity offers the chance to work on cutting-edge projects in a dynamic and collaborative environment. With a focus on innovation and operational excellence, this company is looking for talented individuals like you to make a real impact. Take the next step in your career and be part of a team that values quality, performance, and professional growth. What You Will Do: - Collaborate as a Senior Software Engineer within a high-performing squad to deliver high-quality software deployments. - Optimise communication and integration between development, quality assurance, and IT operations teams. - Develop and implement infrastructure solutions that leverage the latest technology best practices. - Enhance operational performance through innovative problem-solving and process improvements. - Lead and mentor junior team members, delegating tasks and providing guidance to ensure successful project delivery. - Tackle complex challenges with a solutions-focused mindset to drive continuous improvement. What You Will Bring: - Strong expertise in Java (17+), Spring, SQL, NoSQL, AWS, and CI/CD pipelines. - Proficiency in testing frameworks such as JUnit, REST APIs, and message brokers. - General familiarity with deployment methodologies, JSON, scripting, and Jira. - A degree or equivalent long-term professional experience in a relevant field. - A proven ability to manage large-scale projects and work effectively in a collaborative environment. This role is instrumental in driving the company's mission to deliver innovative IT and software solutions. By joining this team, you will contribute to the development of high-performing applications that align with the company's goals for operational excellence and quality-driven outcomes. Location: This role is based in the vibrant city of Manchester, offering an excellent blend of career opportunities and lifestyle amenities. Interested?: Don't miss this opportunity to take your career to the next level. Apply now to become a Senior Software Engineer and join a company that values your skills, fosters innovation, and offers an inspiring work environment. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jul 11, 2026
Contractor
Senior Software Engineer - (phone number removed) - £57.20/hr Are you ready to elevate your career as a Senior Software Engineer? This exciting opportunity offers the chance to work on cutting-edge projects in a dynamic and collaborative environment. With a focus on innovation and operational excellence, this company is looking for talented individuals like you to make a real impact. Take the next step in your career and be part of a team that values quality, performance, and professional growth. What You Will Do: - Collaborate as a Senior Software Engineer within a high-performing squad to deliver high-quality software deployments. - Optimise communication and integration between development, quality assurance, and IT operations teams. - Develop and implement infrastructure solutions that leverage the latest technology best practices. - Enhance operational performance through innovative problem-solving and process improvements. - Lead and mentor junior team members, delegating tasks and providing guidance to ensure successful project delivery. - Tackle complex challenges with a solutions-focused mindset to drive continuous improvement. What You Will Bring: - Strong expertise in Java (17+), Spring, SQL, NoSQL, AWS, and CI/CD pipelines. - Proficiency in testing frameworks such as JUnit, REST APIs, and message brokers. - General familiarity with deployment methodologies, JSON, scripting, and Jira. - A degree or equivalent long-term professional experience in a relevant field. - A proven ability to manage large-scale projects and work effectively in a collaborative environment. This role is instrumental in driving the company's mission to deliver innovative IT and software solutions. By joining this team, you will contribute to the development of high-performing applications that align with the company's goals for operational excellence and quality-driven outcomes. Location: This role is based in the vibrant city of Manchester, offering an excellent blend of career opportunities and lifestyle amenities. Interested?: Don't miss this opportunity to take your career to the next level. Apply now to become a Senior Software Engineer and join a company that values your skills, fosters innovation, and offers an inspiring work environment. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Are you a time served and/or experienced Mechanical Crafts-person/Engineer? Do you have experience within a Heavy Industrial environment? Are you based in or around Llanelli? Trostre Steelworks may be looking for you! Tata Steel Trostre are responsible for producing 400,000 tonnes of tin, chrome and 'polymer' coated steels for the packaging industries annually. The successful applicant will ideally hold a time served Mechanical Engineering apprenticeship and have experience within a Heavy Industrial environment. However, applicants with substantial experience will be considered In this role, you would be responsible for conducting preventative maintenance, inspections and repairs to a busy department. You would play a vital role in ensuring manufacturing operations are smooth and productive. Role: Mechanical Craft Team Member Location: Tata Steel, Trostre, Maes-Ar-Ddafen Road, Llanelli SA14 9SD Salary: £34,609.30 (this includes a 10% shift allowance) Start: ASAP but pending the successful result of a medical assessment. (This does include a drug and alcohol test) Responsibilities: Inspecting and installing Diagnosing and rectifying faults Completing works to internal standards within an effective timeframe to minimise downtime Providing reporting on breakdowns, repairs and related engineering activity Providing Engineering expertise to stakeholders in order to solve complex issues Recommending improvements and upgrades to equipment and/or systems Maintaining an up to date knowledge in m maintenance technique, including attending necessary development courses Being active cover for shift specialists as required Supervising Tata or contract personnel as needed issuing certificates of isolation as part of the safe system of work Adhering to the strongest levels of UK Health and Safety legislation at all times Responsibility for COMAH related activity for the Mechanical Day Craft Maintenance activity Identifying areas for improvement and playing an active part in continuous improvement initiatives Essential requirements: Time served apprenticeship and NVQ3 (Mechanical Engineering) Previous experience (2+ years) within a Heavy Industrial environment The ability to conduct a physically demanding role, with no concerns around working with grease, scale and dust on a daily basis UK Driving Licence and access to own vehicle Ability to be fully flexible and adhere to the shift pattern Good verbal and written communication skills Strong knowledge of UK Health and Safety legislation Benefits: 35 days holidays per annum Annual Pay Review Quarterly Bonus Scheme - subject to business performance One of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) Employee Assistance Programme for financial, mental and physical support Employee discount scheme including discounts with Vodafone and Jaguar Land Rover Opportunity for progression into senior positions Ability to learn, grow and develop with additional training and funded courses All applicants are subject to vetting checks including: Right to work check, medical check and reference check. Randstad Business Support is acting as an Employment Agency in relation to this vacancy.
Jul 11, 2026
Full time
Are you a time served and/or experienced Mechanical Crafts-person/Engineer? Do you have experience within a Heavy Industrial environment? Are you based in or around Llanelli? Trostre Steelworks may be looking for you! Tata Steel Trostre are responsible for producing 400,000 tonnes of tin, chrome and 'polymer' coated steels for the packaging industries annually. The successful applicant will ideally hold a time served Mechanical Engineering apprenticeship and have experience within a Heavy Industrial environment. However, applicants with substantial experience will be considered In this role, you would be responsible for conducting preventative maintenance, inspections and repairs to a busy department. You would play a vital role in ensuring manufacturing operations are smooth and productive. Role: Mechanical Craft Team Member Location: Tata Steel, Trostre, Maes-Ar-Ddafen Road, Llanelli SA14 9SD Salary: £34,609.30 (this includes a 10% shift allowance) Start: ASAP but pending the successful result of a medical assessment. (This does include a drug and alcohol test) Responsibilities: Inspecting and installing Diagnosing and rectifying faults Completing works to internal standards within an effective timeframe to minimise downtime Providing reporting on breakdowns, repairs and related engineering activity Providing Engineering expertise to stakeholders in order to solve complex issues Recommending improvements and upgrades to equipment and/or systems Maintaining an up to date knowledge in m maintenance technique, including attending necessary development courses Being active cover for shift specialists as required Supervising Tata or contract personnel as needed issuing certificates of isolation as part of the safe system of work Adhering to the strongest levels of UK Health and Safety legislation at all times Responsibility for COMAH related activity for the Mechanical Day Craft Maintenance activity Identifying areas for improvement and playing an active part in continuous improvement initiatives Essential requirements: Time served apprenticeship and NVQ3 (Mechanical Engineering) Previous experience (2+ years) within a Heavy Industrial environment The ability to conduct a physically demanding role, with no concerns around working with grease, scale and dust on a daily basis UK Driving Licence and access to own vehicle Ability to be fully flexible and adhere to the shift pattern Good verbal and written communication skills Strong knowledge of UK Health and Safety legislation Benefits: 35 days holidays per annum Annual Pay Review Quarterly Bonus Scheme - subject to business performance One of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) Employee Assistance Programme for financial, mental and physical support Employee discount scheme including discounts with Vodafone and Jaguar Land Rover Opportunity for progression into senior positions Ability to learn, grow and develop with additional training and funded courses All applicants are subject to vetting checks including: Right to work check, medical check and reference check. Randstad Business Support is acting as an Employment Agency in relation to this vacancy.
Job Title: Electronic Design Engineer Location: Nottingham (onsite) Salary: Up to £50k (depending on experience) We re partnering with a well-established UK engineering manufacturer looking to add an Electronics Design Engineer to their team. The role involves working across the full electronics product development lifecycle, from concept design through to production. You will contribute to the design of both existing and next-generation products, supporting hardware development, firmware contributions, product certification, and production testing. You ll work as part of a multidisciplinary engineering team, collaborating with colleagues across project management, mechanical design, software development, testing, and compliance. About the Role Design and develop new electronic products, assemblies, and components from concept through to production. Produce schematics, PCB layouts, multilayer PCB designs, detailed assembly drawings, and bills of materials in accordance with IPC and ISO9001 standards. Carry out engineering calculations and analysis to ensure designs meet functional, performance, and cost requirements. Ensure designs meet EMC and electrical safety requirements. Collaborate with the software and firmware teams, contributing to lower-level firmware development where required. Work with suppliers and manufacturing partners, providing technical documentation and test specifications. Estimate project timelines accurately and manage workflow, milestones, and progress reporting. About You Degree or equivalent qualification in Electrical or Electronic Engineering or related discipline. 5+ years experience working as an Electrical / Electronic Design Engineer or Senior Electrical / Electronic Design Engineer. Strong experience using Altium Designer or a comparable PCB design package. Familiarity with engineering tools and applications such as Git and Microsoft Office (Word, Excel, Outlook). Strong analytical and electronic design skills. Understanding of manufacturing processes relevant to electronics production. Ability to build effective working relationships across multidisciplinary engineering teams. Strong organisational skills with the ability to prioritise tasks and manage multiple projects simultaneously. Please note, we cannot offer sponsorship for this position. If interested, please send over an updated CV.
Jul 11, 2026
Full time
Job Title: Electronic Design Engineer Location: Nottingham (onsite) Salary: Up to £50k (depending on experience) We re partnering with a well-established UK engineering manufacturer looking to add an Electronics Design Engineer to their team. The role involves working across the full electronics product development lifecycle, from concept design through to production. You will contribute to the design of both existing and next-generation products, supporting hardware development, firmware contributions, product certification, and production testing. You ll work as part of a multidisciplinary engineering team, collaborating with colleagues across project management, mechanical design, software development, testing, and compliance. About the Role Design and develop new electronic products, assemblies, and components from concept through to production. Produce schematics, PCB layouts, multilayer PCB designs, detailed assembly drawings, and bills of materials in accordance with IPC and ISO9001 standards. Carry out engineering calculations and analysis to ensure designs meet functional, performance, and cost requirements. Ensure designs meet EMC and electrical safety requirements. Collaborate with the software and firmware teams, contributing to lower-level firmware development where required. Work with suppliers and manufacturing partners, providing technical documentation and test specifications. Estimate project timelines accurately and manage workflow, milestones, and progress reporting. About You Degree or equivalent qualification in Electrical or Electronic Engineering or related discipline. 5+ years experience working as an Electrical / Electronic Design Engineer or Senior Electrical / Electronic Design Engineer. Strong experience using Altium Designer or a comparable PCB design package. Familiarity with engineering tools and applications such as Git and Microsoft Office (Word, Excel, Outlook). Strong analytical and electronic design skills. Understanding of manufacturing processes relevant to electronics production. Ability to build effective working relationships across multidisciplinary engineering teams. Strong organisational skills with the ability to prioritise tasks and manage multiple projects simultaneously. Please note, we cannot offer sponsorship for this position. If interested, please send over an updated CV.
Supporting rapid prototyping, fabrication and small-batch production for engineering and R&D Cambridgeshire, CB10; £28,000 - £48,000 DoE Based onsite at dedicated office and workshop, the Prototyping Technician will join a small technical engineering team developing components used in robotics, advanced sensing technologies and AI-enabled systems. This hands-on role will include operating advanced additive manufacturing equipment (3D printing). Requirements: Experience with 3D printers (ideally industrial, but extensive hobby project experience may be considered). This should include operating, maintaining and troubleshooting of 3D printer technology (FDM, SLA, SLS). Understanding of CAD (SolidWorks, Fusion 360) for preparing print files. Hands-on experience with bespoke fabrication including prototype electromechanical components. This may include the use of drills, saws, mills, sanders and other hand tools. Any experience with CNC would be desirable. Excellent understanding of mechanical principles and tolerances responsibilities will include quality testing and component performance. For senior level, experience with mentoring and training would be required. As projects may have military applications, the company require technical employees to be able to get UK security clearance, so only eligible British nationals will be considered. The position is fully onsite. On offer is a competitive salary and the opportunity to work on cutting edge technology and develop specialist technical skills. Another top job from ECM, the high-tech recruitment experts. Even if this job's not quite right, do contact us now - we may well have the ideal job for you. To discuss your requirements call (phone number removed) or email your CV. We will always ask before forwarding your CV. Please apply (quoting ref: CV27429 ) only if you are eligible to live and work in the UK. By submitting your details you certify that the information you provide is accurate.
Jul 11, 2026
Full time
Supporting rapid prototyping, fabrication and small-batch production for engineering and R&D Cambridgeshire, CB10; £28,000 - £48,000 DoE Based onsite at dedicated office and workshop, the Prototyping Technician will join a small technical engineering team developing components used in robotics, advanced sensing technologies and AI-enabled systems. This hands-on role will include operating advanced additive manufacturing equipment (3D printing). Requirements: Experience with 3D printers (ideally industrial, but extensive hobby project experience may be considered). This should include operating, maintaining and troubleshooting of 3D printer technology (FDM, SLA, SLS). Understanding of CAD (SolidWorks, Fusion 360) for preparing print files. Hands-on experience with bespoke fabrication including prototype electromechanical components. This may include the use of drills, saws, mills, sanders and other hand tools. Any experience with CNC would be desirable. Excellent understanding of mechanical principles and tolerances responsibilities will include quality testing and component performance. For senior level, experience with mentoring and training would be required. As projects may have military applications, the company require technical employees to be able to get UK security clearance, so only eligible British nationals will be considered. The position is fully onsite. On offer is a competitive salary and the opportunity to work on cutting edge technology and develop specialist technical skills. Another top job from ECM, the high-tech recruitment experts. Even if this job's not quite right, do contact us now - we may well have the ideal job for you. To discuss your requirements call (phone number removed) or email your CV. We will always ask before forwarding your CV. Please apply (quoting ref: CV27429 ) only if you are eligible to live and work in the UK. By submitting your details you certify that the information you provide is accurate.
Maintenance Engineer - Forces Background 38,000 - 43,000 + Training + Progression + Benefits Monday - Friday, Days. 40 Hours Per Week Exeter Are you an engineer with a forces background? Are you looking for a new and exciting opportunity within a growing and successful manufacturing business who have continued to invest into their facility and pride themselves on first class staff retention and development? Due to continued growth, my client is looking for a maintenance engineer to join the team at their state of the art facility in Exeter. This is an amazing opportunity for an Engineer looking to gain skills and experience within a manufacturing business that is one of the largest in the industry. The successful applicant will be responsible for maintaining and repairing a range of production machinery, this role offers lots of day-to-day variety that will see you carry out the planned, preventative and reactive maintenance within the plant. This is a great opportunity to join an industry leading business who have an excellent staff retention and development record, the team will provide training to enhance your skillset and become a well rounded engineer within the industry. With a days based pattern this role offers great work/life balance within a leading group. All skill levels of Engineers are encouraged to apply, for more information please apply and contact Patrick Walsh - REF 5149FS - (phone number removed) The Role: Electrical & Mechanical Maintenance Planned, Reactive and Preventive Maintenance Excellent Training for ex forces engineers The Candidate: Forces background and keen to get into the manufacturing sector Engineering Qualifications A commutable distance to Exeter elix sourcing solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Craftsperson Factory Engineer Reliability Electrician Fitter Maintenance Electrical Mechanical Engineer Multi Skilled PPM Fault Finding Process Machinery Junior Training FMCG Manufacturing Testing Inspecting Repairs PLC Electric CNC Millers Automation Robotics Exeter Devon Tiverton Okehampton Forces Army Marines Military Forces Jobs Crediton INDMP
Jul 11, 2026
Full time
Maintenance Engineer - Forces Background 38,000 - 43,000 + Training + Progression + Benefits Monday - Friday, Days. 40 Hours Per Week Exeter Are you an engineer with a forces background? Are you looking for a new and exciting opportunity within a growing and successful manufacturing business who have continued to invest into their facility and pride themselves on first class staff retention and development? Due to continued growth, my client is looking for a maintenance engineer to join the team at their state of the art facility in Exeter. This is an amazing opportunity for an Engineer looking to gain skills and experience within a manufacturing business that is one of the largest in the industry. The successful applicant will be responsible for maintaining and repairing a range of production machinery, this role offers lots of day-to-day variety that will see you carry out the planned, preventative and reactive maintenance within the plant. This is a great opportunity to join an industry leading business who have an excellent staff retention and development record, the team will provide training to enhance your skillset and become a well rounded engineer within the industry. With a days based pattern this role offers great work/life balance within a leading group. All skill levels of Engineers are encouraged to apply, for more information please apply and contact Patrick Walsh - REF 5149FS - (phone number removed) The Role: Electrical & Mechanical Maintenance Planned, Reactive and Preventive Maintenance Excellent Training for ex forces engineers The Candidate: Forces background and keen to get into the manufacturing sector Engineering Qualifications A commutable distance to Exeter elix sourcing solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Craftsperson Factory Engineer Reliability Electrician Fitter Maintenance Electrical Mechanical Engineer Multi Skilled PPM Fault Finding Process Machinery Junior Training FMCG Manufacturing Testing Inspecting Repairs PLC Electric CNC Millers Automation Robotics Exeter Devon Tiverton Okehampton Forces Army Marines Military Forces Jobs Crediton INDMP
Job Title: Operations Director Location: Cambridge Salary: Competitive Job type: Permanent, Full-time About the Organisation: MISTRAS Group is a leading global provider of asset protection solutions, helping organisations maximise the safety, reliability and performance of their critical assets. Through a combination of inspection, engineering, testing, monitoring and data-driven solutions, MISTRAS supports customers across industries including energy, oil and gas, power generation, infrastructure, aerospace and manufacturing. With a strong focus on innovation, safety and operational excellence, MISTRAS helps clients reduce risk, ensure compliance and extend the life of their assets. About the Role: Reporting to the Vice President UK, the Operations Director is accountable for the safe, compliant, efficient and commercially effective delivery of UK operational services. This position will focus on operational leadership, service delivery, resource planning, project execution, performance improvement and client delivery, while working closely with the Technical Director to ensure technical standards, engineering integrity and specialist capability are embedded into operational practice. Key Responsibilities: Operational Leadership & Strategy Contribute to the organisation's UK business strategy, annual operating plan, budget and growth priorities. Translate strategic objectives into operational plans, performance measures and delivery priorities and successfully communicate these to the wider management team and employees in the UK. Creation and implementation of the company's operational processes in the UK and ensure operational teams follow approved processes, procedures, competence requirements and safe systems of work. Create, promote and report on operational KPI's including general performance, incidents, near misses, non-conformances and improvement actions. Ensure operations are delivered in accordance with applicable UK legislation, client requirements, project deliverables, budgets, industry standards and internal policies. Maintain effective operational risk management, including risk registers, project reviews, incident escalation and corrective actions and support external and internal audits relating to operations, quality, safety, environmental and client compliance requirements. Lead operational change initiatives, including process improvement, systems adoption, organisational design and integration of global best practice. Leadership & People Management Manage and lead direct reports in the UK including where appropriate: resource planning and recruitment. ensure that their performance effectively delivers the relevant company's services to its clients profitably. agree targets and objectives and regularly monitor their performance against these. regular communication through informal and formal channels such as team and one to one meetings. lead and promote business improvement, change and strategic projects. coach, mentor and train. Champion a culture of safety, quality, integrity, collaboration, innovation and customer focus. About you: Skills, Experience and Knowledge: Significant senior operational leadership experience in a technical services, engineering, inspection, asset integrity, energy, industrial, infrastructure or related environment. Proven track record of leading multi-site or field-based operations with responsibility for safety, quality, service delivery and commercial performance. Experience of managing operational budgets, workforce utilisation, project delivery, productivity and margin improvement. Strong understanding of regulated, safety-critical or compliance-led operational environments. Experience working with senior clients and leading operational teams to deliver complex technical services. Demonstrable ability to lead change, improve processes and build high-performing teams Passion for providing service excellence, drive to achieve results and a mindset that puts the 'customer' at the centre of everything they do. Strong commercial acumen, with the ability to balance customer service, operational risk, profitability and long-term business growth. Excellent planning, prioritisation and decision-making skills in complex and fast-moving operational environments. Clear communicator who can translate strategy into practical action and create accountability across teams. Collaborative approach, particularly in partnering with technical, commercial and corporate functions. High standards of integrity, safety leadership, professionalism and customer focus. IT skills - Microsoft Office Outlook, Word, Excel. Hubspot or compatible CRM. Why Join Us? This is an outstanding opportunity to join a leadership team and play a pivotal role in shaping operational performance, driving continuous improvement and delivering exceptional service to customers. You will have the opportunity to influence business strategy, lead talented teams and contribute directly to the long-term growth and success of the organisation. How to Apply? Please click the APPLY button to submit your CV and Covering Letter for this role. Candidates with experience as an Operations Manager, Head of Operations, Regional Operations Director, Service Delivery Director, Operational Excellence Director, General Manager, Technical Operations Director, Engineering Operations Manager, Business Operations Director or Operations Lead may also be considered for this role.
Jul 11, 2026
Full time
Job Title: Operations Director Location: Cambridge Salary: Competitive Job type: Permanent, Full-time About the Organisation: MISTRAS Group is a leading global provider of asset protection solutions, helping organisations maximise the safety, reliability and performance of their critical assets. Through a combination of inspection, engineering, testing, monitoring and data-driven solutions, MISTRAS supports customers across industries including energy, oil and gas, power generation, infrastructure, aerospace and manufacturing. With a strong focus on innovation, safety and operational excellence, MISTRAS helps clients reduce risk, ensure compliance and extend the life of their assets. About the Role: Reporting to the Vice President UK, the Operations Director is accountable for the safe, compliant, efficient and commercially effective delivery of UK operational services. This position will focus on operational leadership, service delivery, resource planning, project execution, performance improvement and client delivery, while working closely with the Technical Director to ensure technical standards, engineering integrity and specialist capability are embedded into operational practice. Key Responsibilities: Operational Leadership & Strategy Contribute to the organisation's UK business strategy, annual operating plan, budget and growth priorities. Translate strategic objectives into operational plans, performance measures and delivery priorities and successfully communicate these to the wider management team and employees in the UK. Creation and implementation of the company's operational processes in the UK and ensure operational teams follow approved processes, procedures, competence requirements and safe systems of work. Create, promote and report on operational KPI's including general performance, incidents, near misses, non-conformances and improvement actions. Ensure operations are delivered in accordance with applicable UK legislation, client requirements, project deliverables, budgets, industry standards and internal policies. Maintain effective operational risk management, including risk registers, project reviews, incident escalation and corrective actions and support external and internal audits relating to operations, quality, safety, environmental and client compliance requirements. Lead operational change initiatives, including process improvement, systems adoption, organisational design and integration of global best practice. Leadership & People Management Manage and lead direct reports in the UK including where appropriate: resource planning and recruitment. ensure that their performance effectively delivers the relevant company's services to its clients profitably. agree targets and objectives and regularly monitor their performance against these. regular communication through informal and formal channels such as team and one to one meetings. lead and promote business improvement, change and strategic projects. coach, mentor and train. Champion a culture of safety, quality, integrity, collaboration, innovation and customer focus. About you: Skills, Experience and Knowledge: Significant senior operational leadership experience in a technical services, engineering, inspection, asset integrity, energy, industrial, infrastructure or related environment. Proven track record of leading multi-site or field-based operations with responsibility for safety, quality, service delivery and commercial performance. Experience of managing operational budgets, workforce utilisation, project delivery, productivity and margin improvement. Strong understanding of regulated, safety-critical or compliance-led operational environments. Experience working with senior clients and leading operational teams to deliver complex technical services. Demonstrable ability to lead change, improve processes and build high-performing teams Passion for providing service excellence, drive to achieve results and a mindset that puts the 'customer' at the centre of everything they do. Strong commercial acumen, with the ability to balance customer service, operational risk, profitability and long-term business growth. Excellent planning, prioritisation and decision-making skills in complex and fast-moving operational environments. Clear communicator who can translate strategy into practical action and create accountability across teams. Collaborative approach, particularly in partnering with technical, commercial and corporate functions. High standards of integrity, safety leadership, professionalism and customer focus. IT skills - Microsoft Office Outlook, Word, Excel. Hubspot or compatible CRM. Why Join Us? This is an outstanding opportunity to join a leadership team and play a pivotal role in shaping operational performance, driving continuous improvement and delivering exceptional service to customers. You will have the opportunity to influence business strategy, lead talented teams and contribute directly to the long-term growth and success of the organisation. How to Apply? Please click the APPLY button to submit your CV and Covering Letter for this role. Candidates with experience as an Operations Manager, Head of Operations, Regional Operations Director, Service Delivery Director, Operational Excellence Director, General Manager, Technical Operations Director, Engineering Operations Manager, Business Operations Director or Operations Lead may also be considered for this role.
MERITUS are recruiting for an Electronics Hardware Engineer to join a cutting edge engineering business developing advanced subsea electronic systems used in defence, marine and scientific applications. ELECTRONICS HARDWARE ENGINEER Up to 65,000 HAMPSHIRE HYBRID WORKING (2 DAYS ONSITE) BONUS ANALOGUE & DIGITAL DESIGN EMBEDDED C EMC PERMANENT MERITUS are working with an innovative engineering organisation at the forefront of subsea technology, developing sophisticated electronic hardware for underwater acoustic systems, navigation equipment, velocity measurement tools and data logging platforms. Due to continued growth, they're looking to add an Electronics Hardware Engineer to their multidisciplinary engineering team. This is a hands on engineering role where you'll be involved throughout the full product lifecycle, from concept and design through to testing, production support and continuous product improvement. You'll work on technically challenging projects where reliability and performance are critical. Main Responsibilities: Design analogue and digital electronic hardware for new and existing products. Develop low power, low noise electronic circuits for demanding environments. Work with programmable logic devices and microprocessor based systems. Develop and maintain embedded firmware in C, with some exposure to C++. Support EMC design activities and compliance testing. Investigate and resolve hardware and embedded software faults. Lead technical design reviews and contribute to engineering decision making. Produce technical documentation including schematics, design reports and manufacturing documentation. Support production and manufacturing teams during product introduction. Skills Required: Degree in Electronic Engineering or a related discipline. Strong background in analogue and digital electronics design. Experience developing microprocessor based systems. Knowledge of programmable logic devices. Embedded C programming experience. Understanding of EMC design principles and compliance. Experience using PCB design tools and interpreting complex schematics. Excellent technical documentation skills. Ability to work across the full product development lifecycle. Benefits: Salary up to 65,000. Discretionary annual performance bonus. Hybrid working with only two days onsite each week. Flexible working options including a nine day fortnight. 25 days holiday plus bank holidays, with the option to purchase additional leave. Two additional company festive closure days. Health cash plan, pension, life assurance and income protection. Enhanced family leave. Electric vehicle salary sacrifice scheme and cycle to work scheme. Employee assistance programme and wellbeing support. Paid volunteering days and regular company social events.
Jul 11, 2026
Full time
MERITUS are recruiting for an Electronics Hardware Engineer to join a cutting edge engineering business developing advanced subsea electronic systems used in defence, marine and scientific applications. ELECTRONICS HARDWARE ENGINEER Up to 65,000 HAMPSHIRE HYBRID WORKING (2 DAYS ONSITE) BONUS ANALOGUE & DIGITAL DESIGN EMBEDDED C EMC PERMANENT MERITUS are working with an innovative engineering organisation at the forefront of subsea technology, developing sophisticated electronic hardware for underwater acoustic systems, navigation equipment, velocity measurement tools and data logging platforms. Due to continued growth, they're looking to add an Electronics Hardware Engineer to their multidisciplinary engineering team. This is a hands on engineering role where you'll be involved throughout the full product lifecycle, from concept and design through to testing, production support and continuous product improvement. You'll work on technically challenging projects where reliability and performance are critical. Main Responsibilities: Design analogue and digital electronic hardware for new and existing products. Develop low power, low noise electronic circuits for demanding environments. Work with programmable logic devices and microprocessor based systems. Develop and maintain embedded firmware in C, with some exposure to C++. Support EMC design activities and compliance testing. Investigate and resolve hardware and embedded software faults. Lead technical design reviews and contribute to engineering decision making. Produce technical documentation including schematics, design reports and manufacturing documentation. Support production and manufacturing teams during product introduction. Skills Required: Degree in Electronic Engineering or a related discipline. Strong background in analogue and digital electronics design. Experience developing microprocessor based systems. Knowledge of programmable logic devices. Embedded C programming experience. Understanding of EMC design principles and compliance. Experience using PCB design tools and interpreting complex schematics. Excellent technical documentation skills. Ability to work across the full product development lifecycle. Benefits: Salary up to 65,000. Discretionary annual performance bonus. Hybrid working with only two days onsite each week. Flexible working options including a nine day fortnight. 25 days holiday plus bank holidays, with the option to purchase additional leave. Two additional company festive closure days. Health cash plan, pension, life assurance and income protection. Enhanced family leave. Electric vehicle salary sacrifice scheme and cycle to work scheme. Employee assistance programme and wellbeing support. Paid volunteering days and regular company social events.
Senior / Principal Software Engineer Calibration & Controls Wrexham Permanent An exciting opportunity has arisen for an experienced Embedded Software Engineer to join a market-leading engineering business developing advanced transmission control systems for off-highway vehicles. We're keen to speak with both Senior and Principal level engineers, with the role and package tailored to your experience. The Role You'll join a collaborative Electronics & Controls team, developing embedded software for transmission control systems and supporting products from concept through to validation. Key responsibilities include: Designing and developing embedded software in C. Producing high and low-level software designs from functional requirements. Working within a structured V-model software development process. Supporting verification and validation activities, including automated testing. Carrying out code reviews and ensuring compliance with software quality and functional safety standards. Working closely with multidisciplinary engineering teams throughout the development lifecycle. About You - We're looking for engineers with: Proven experience developing embedded software in C (C++ also beneficial). Experience working on embedded control systems. Knowledge of functional safety and relevant ISO standards. Experience following structured software development processes. Good communication skills and the ability to work effectively within engineering teams. Desirable Experience AUTOSAR (DaVinci, ISOLAR, tresos) Vector tools (CANoe, CANalyzer, CANape) Python scripting for test automation MATLAB/Simulink Static code analysis and software metrics Bootloader development Atlassian tools What's on Offer Competitive salary dependent on experience. Excellent benefits package including strong pension, healthcare and lots of other perks. Career progression opportunities. Opportunity to work on innovative embedded control technology within a highly respected engineering environment. Interested? If you're an experienced Embedded Software Engineer looking for your next challenge, we'd love to hear from you Please note - Sponsorship is not available Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jul 10, 2026
Full time
Senior / Principal Software Engineer Calibration & Controls Wrexham Permanent An exciting opportunity has arisen for an experienced Embedded Software Engineer to join a market-leading engineering business developing advanced transmission control systems for off-highway vehicles. We're keen to speak with both Senior and Principal level engineers, with the role and package tailored to your experience. The Role You'll join a collaborative Electronics & Controls team, developing embedded software for transmission control systems and supporting products from concept through to validation. Key responsibilities include: Designing and developing embedded software in C. Producing high and low-level software designs from functional requirements. Working within a structured V-model software development process. Supporting verification and validation activities, including automated testing. Carrying out code reviews and ensuring compliance with software quality and functional safety standards. Working closely with multidisciplinary engineering teams throughout the development lifecycle. About You - We're looking for engineers with: Proven experience developing embedded software in C (C++ also beneficial). Experience working on embedded control systems. Knowledge of functional safety and relevant ISO standards. Experience following structured software development processes. Good communication skills and the ability to work effectively within engineering teams. Desirable Experience AUTOSAR (DaVinci, ISOLAR, tresos) Vector tools (CANoe, CANalyzer, CANape) Python scripting for test automation MATLAB/Simulink Static code analysis and software metrics Bootloader development Atlassian tools What's on Offer Competitive salary dependent on experience. Excellent benefits package including strong pension, healthcare and lots of other perks. Career progression opportunities. Opportunity to work on innovative embedded control technology within a highly respected engineering environment. Interested? If you're an experienced Embedded Software Engineer looking for your next challenge, we'd love to hear from you Please note - Sponsorship is not available Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
A global friction welding manufacturer is looking for an Electrical Design Engineer to join their team based around the Birmingham area The ideal candidate will be a hard-working and adaptable Engineer with a strong design background. Operating at the Halesowen site, you will be responsible for the design and technical support of industrial control panels and more This is a fantastic opportunity with a multi-national welding company who supply to some the biggest names in the world Role: Electrical Design Engineer Office Location: Birmingham Salary: £55,000 - £60,000 The key responsibilities of the Electrical Design Engineer role will be: Prepare and configure both standard and custom electrical wiring drawings, along with complete Bills of Materials (BOMs). Ensure all designs comply with relevant regulatory, design, and testing requirements. Produce design documentation including drawings, calculations, and technical specifications. Collaborate with suppliers to ensure delivered solutions meet required performance standards. Provide technical guidance and promote best practices in industrial control panel design. Maintain compliance with applicable design and testing standards throughout project lifecycles. Develop and support test rigs, simulation models, and prototype control systems. Generate safety approval and sign-off documentation. Perform calculations in line with applicable standards (e.g. BS EN 13849) and demonstrate a strong understanding of relevant electrical standards (e.g. IEC 60204) The key requirements of the Electrical Design Engineer will be: Proficiency in electrical design software such as AutoCAD Mechanical/Electrical and EPLAN. Strong working knowledge of Microsoft Office applications. Solid understanding of industrial electrical systems and control panel design. Familiarity with relevant safety and compliance standards. HND or Degree qualified is preferred Please apply online or contact for a confidential conversation Executive Network Group, encompassing Technical Network, Network HR, HSE Network & Procurement People, sourcing mid to senior level management for automotive, aerospace, engineering and manufacturing industrial sectors, with a portfolio of services including executive search, advertising, MRO for permanent and interim contract recruitment services
Jul 10, 2026
Full time
A global friction welding manufacturer is looking for an Electrical Design Engineer to join their team based around the Birmingham area The ideal candidate will be a hard-working and adaptable Engineer with a strong design background. Operating at the Halesowen site, you will be responsible for the design and technical support of industrial control panels and more This is a fantastic opportunity with a multi-national welding company who supply to some the biggest names in the world Role: Electrical Design Engineer Office Location: Birmingham Salary: £55,000 - £60,000 The key responsibilities of the Electrical Design Engineer role will be: Prepare and configure both standard and custom electrical wiring drawings, along with complete Bills of Materials (BOMs). Ensure all designs comply with relevant regulatory, design, and testing requirements. Produce design documentation including drawings, calculations, and technical specifications. Collaborate with suppliers to ensure delivered solutions meet required performance standards. Provide technical guidance and promote best practices in industrial control panel design. Maintain compliance with applicable design and testing standards throughout project lifecycles. Develop and support test rigs, simulation models, and prototype control systems. Generate safety approval and sign-off documentation. Perform calculations in line with applicable standards (e.g. BS EN 13849) and demonstrate a strong understanding of relevant electrical standards (e.g. IEC 60204) The key requirements of the Electrical Design Engineer will be: Proficiency in electrical design software such as AutoCAD Mechanical/Electrical and EPLAN. Strong working knowledge of Microsoft Office applications. Solid understanding of industrial electrical systems and control panel design. Familiarity with relevant safety and compliance standards. HND or Degree qualified is preferred Please apply online or contact for a confidential conversation Executive Network Group, encompassing Technical Network, Network HR, HSE Network & Procurement People, sourcing mid to senior level management for automotive, aerospace, engineering and manufacturing industrial sectors, with a portfolio of services including executive search, advertising, MRO for permanent and interim contract recruitment services
Lead Embedded Software Engineer Location: Ealing Area - With Hybrid Working from Home Salary: Up to 80,000 + Extensive Benefits The Role KO2's client is looking for a Lead Embedded Software Engineer to drive the development of robust, scalable embedded software solutions for next-generation electric products. This role combines hands-on technical delivery with small-team leadership, offering the opportunity to influence architecture, mentor engineers, and shape the future direction of embedded platforms. You will play a key role across the full product lifecycle - from early-stage prototyping and system design through to production, manufacturing, and long-term product support - while helping build engineering best practices and delivery capability within the team. Key Responsibilities Lead the design and development of high-quality embedded software that is efficient, maintainable, scalable, and production-ready Provide technical leadership to a small embedded software team, supporting task planning, technical direction, mentoring, and code reviews Collaborate closely with hardware, systems, and manufacturing teams to support board bring-up, debugging, integration, and system validation Own key architectural decisions, helping define software frameworks, coding standards, development processes, and long-term platform strategy Design, implement, test, and maintain embedded software for internally developed electric systems and connected devices Investigate and resolve complex real-time issues relating to timing, performance, reliability, and signal integrity Support continuous improvement initiatives across tooling, automation, testing, and development workflows Contribute to project planning, technical estimation, risk management, and delivery milestones Champion engineering best practices including documentation, version control, CI/CD, and software quality standards About You Strong commercial experience developing embedded software in C and C++ Proven experience leading or mentoring engineers within a small technical team or project environment Strong understanding of embedded systems architecture and full software development lifecycle practices Experience developing RTOS-based applications Hands-on experience with embedded communication protocols such as BLE, CAN, I2C, UART, or SPI Comfortable working across hardware/software boundaries, including debugging and system integration Experience using version control systems, particularly Git, within collaborative development environments A proactive technical problem-solver with strong analytical and root-cause investigation skills Ability to communicate effectively with both technical and non-technical stakeholders Desirable Skills Exposure to functional safety standards such as ISO 13849 or ISO 26262 Experience with CI/CD pipelines and modern development tooling (e.g. Jenkins, Docker) Familiarity with Python for automation, tooling, or test development Experience contributing to technical roadmaps, architectural strategy, or platform standardisatioN Why Apply? This is an excellent opportunity for a senior embedded engineer ready to step into a lead role - or an existing lead engineer looking for greater technical ownership and influence within an innovative engineering environment developing advanced electric products. Apply today with an up-to-date CV
Jul 10, 2026
Full time
Lead Embedded Software Engineer Location: Ealing Area - With Hybrid Working from Home Salary: Up to 80,000 + Extensive Benefits The Role KO2's client is looking for a Lead Embedded Software Engineer to drive the development of robust, scalable embedded software solutions for next-generation electric products. This role combines hands-on technical delivery with small-team leadership, offering the opportunity to influence architecture, mentor engineers, and shape the future direction of embedded platforms. You will play a key role across the full product lifecycle - from early-stage prototyping and system design through to production, manufacturing, and long-term product support - while helping build engineering best practices and delivery capability within the team. Key Responsibilities Lead the design and development of high-quality embedded software that is efficient, maintainable, scalable, and production-ready Provide technical leadership to a small embedded software team, supporting task planning, technical direction, mentoring, and code reviews Collaborate closely with hardware, systems, and manufacturing teams to support board bring-up, debugging, integration, and system validation Own key architectural decisions, helping define software frameworks, coding standards, development processes, and long-term platform strategy Design, implement, test, and maintain embedded software for internally developed electric systems and connected devices Investigate and resolve complex real-time issues relating to timing, performance, reliability, and signal integrity Support continuous improvement initiatives across tooling, automation, testing, and development workflows Contribute to project planning, technical estimation, risk management, and delivery milestones Champion engineering best practices including documentation, version control, CI/CD, and software quality standards About You Strong commercial experience developing embedded software in C and C++ Proven experience leading or mentoring engineers within a small technical team or project environment Strong understanding of embedded systems architecture and full software development lifecycle practices Experience developing RTOS-based applications Hands-on experience with embedded communication protocols such as BLE, CAN, I2C, UART, or SPI Comfortable working across hardware/software boundaries, including debugging and system integration Experience using version control systems, particularly Git, within collaborative development environments A proactive technical problem-solver with strong analytical and root-cause investigation skills Ability to communicate effectively with both technical and non-technical stakeholders Desirable Skills Exposure to functional safety standards such as ISO 13849 or ISO 26262 Experience with CI/CD pipelines and modern development tooling (e.g. Jenkins, Docker) Familiarity with Python for automation, tooling, or test development Experience contributing to technical roadmaps, architectural strategy, or platform standardisatioN Why Apply? This is an excellent opportunity for a senior embedded engineer ready to step into a lead role - or an existing lead engineer looking for greater technical ownership and influence within an innovative engineering environment developing advanced electric products. Apply today with an up-to-date CV
